Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube

Transcription

1 Air ylinder S Series,,,,,, J Series Variations Series Action asic Standard variations Page JP J JM Standard S Series S Series Double acting Single rod S series Double rod SW series M M3 G G3 JM M M A S SW Series S Low Friction SQ Series Double acting Single rod SQ series 557 For the aluminum tubing of bore sizes, and, a new S series (P.565) model is now available with reduced weight and self weight deflection. Please consider using the S series. D- 57 -X

2 ombinations of Standard Products and Made S Series : Standard : Made to Order specifications : Special product (ontact SM for details.) : Not available Symbol Standard DS J S-K - XA X5 X6 X7 X6 X3 X4 X5 X6 X7 X8 X9 X X X X4 X5 X X6 X7 X X35 X X X X68 X86 Specification Standard uilt-in magnet opper Note ) and Fluorine-free hange of rod end shape Oversized rod cylinder Heat-resistant cylinder ( to ) old-resistant cylinder Large-bore air-hydro cylinder Special port location With heavy duty scraper Heat-resistant cylinder ( to ) Stainless steel Tie-rod, cushion valve, tie-rod nut and similar parts made of stainless steel Adjustable stroke cylinder/adjustable extension type Adjustable stroke cylinder/adjustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder hange of trunnion bracket mounting position hange of tie-rod length Fluororubber seal levis pins with flat washer Double clevis pins made of stainless steel (Stainless steel 4) Rod side trunnion mounted on the rod cover front With coil scraper Special trunnion axis levis hole with bushing Knuckle fixed with nuts Hard chrome plated stainless steel rod With rod end bracket Series Action/ Applicable bore size to to to to to to to to to to to Note ) Applicable I.D.: to, and are available upon request for special order. Note ) opper-free for the externally exposed part. For details, refer to the Web atalog. S (Standard) Double acting Single rod to Note ) Note ) to 58

3 to Order Specifications S Series S (Standard) Double rod Double acting SQ (Low friction) Single rod to to J JP J JM M M3 G G3 JM M M A S S D- -X

4 Air ylinder: Standard /, S Series /:,,,,,, :,, How to Order For the aluminum tubing of bore sizes, and, a new S series (P.565) model is now available with reduced weight and self weight deflection. Please consider using the S series. Symbol Nil F,, to, L F G D T S L Mounting asic type Foot type Rod side flange type Head side flange type Single clevis type Double clevis type enter trunnion type Tubing material Aluminum tube Steel tube Steel tube Tubing material Nil N H Stroke range or less or less or more or more All stroke Note) or less or less Refer to page 53 for the maximum strokes. Note) The tubing material of items with a bore size of and corresponding to the lass Pressure Vessel Act is aluminum tubing. Nil Applicable V Not applicable This indicates whether or not the cylinder stroke is applicable to the lass Pressure Vessel Act and whether or not the product is made in Japan. -V is not put on a product with a stroke not applicable to the lass Pressure Vessel Act. For details, refer to page 53. Suffix for cylinder Rod boot J K N R H Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushion in rod side With cushion in head side With cushion in both sides Nil ( type has no cushion.) If specifying more than one symbol, indicate them in alphabetically type has no cushion. No symbol indicates no cushion. ushion V lass Pressure Vessel (Subject to or not subject to) Made to Order (Refer to page 53 for details.) ylinder stroke (Refer to Maximum Stroke on page 53.), mm mm mm mm mm mm mm mm mm mm Port thread type Nil Rc TN NPT TF G Mounting racket Part No. Foot type S-L S-F S-L4 S-L6 S-F6 S-6 S-D6 S-L8 S-L S-F S- S-D S-L5 Flange type S-F4 S-F8 S-F5 Single clevis type Double clevis type S- S-D S-4 S-D4 S-8 S-D8 S-5 S-D5 Order two foot brackets per cylinder. When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. S-L S-F S- S-D For How to Order with auto switch, refer to page

5 Air ylinder: Standard /, S Series Symbol Double acting, Air cushion Symbol Made to Order Specifications lick here for details -XA hange of rod end shape -X5 Oversized rod cylinder -X6 Heat-resistant cylinder ( to ) -X3 Special port location -X4 With heavy duty scraper -X5 Heat resistant cylinder ( ) -X6 Made of stainless steel -X8 Adjustable stroke cylinder/adjustable extension type -X9 Adjustable stroke cylinder/adjustable retraction type -X Dual stroke cylinder/double rod type -X Dual stroke cylinder/single rod type -X4 hange of trunnion bracket mounting position -X5 hange of tie-rod length -X Fluororubber seal -X6 levis pins with flat washer Double clevis pin and double knuckle pin -X7 made of stainless steel -X Rod side trunnion -X35 With coil scraper -X68 Hard chrome plated stainless steel rod -X86 With rod end bracket Rod oot Material Symbol Material J Nylon tarpaulin K Heat resistant tarpaulin Specifications Maximum ambient temperature 7 Maximum ambient temperature for the rod boot itself. Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion Ambient and fluid temperature Stroke length tolerance, to Air.5 MPa to mm/s Note).57 MPa.97 MPa,, Turbine oil.6 MPa.5 to mm/s Interchangeable None to 7 (No freezing), type: 5 to or less st : +., 5 to, st : +.4,, to, st : +.8 to st : +., to st : +.6 asic type, Foot type, Rod side flange type, Mounting Head side flange type, Single clevis type, Double clevis type, enter trunnion type Note) Item corresponding to lass Pressure Vessel Act is.46 MPa. Maximum Stroke Tubing material Accessory Standard equipment Option Mounting bracket Mounting levis pin, otter pin Rod end nut Single knuckle joint Double knuckle joint (levis pin, otter pin) Rod boot asic type Aluminum tube asic type, Head side flange type Single clevis type, Double clevis type enter trunnion type, Foot type Rod side flange type or less or less or less Foot type Rod side flange type or less or less or less or less Note) or less or less or less Head side flange type Single clevis type Steel tube asic type Head side flange type Single clevis type Double clevis type enter trunnion type Double clevis type enter trunnion type In the case of using the rod end nut together with the single knuckle joint or double knuckle joint, refer to page 547. Foot type Rod side flange type or less or less or less Note) or less Note) or less or less or less Note) The tubing material of items with a bore size of and corresponding to the lass Pressure Vessel Act is aluminum tubing. Principal Parts Material and Surface Treatment over Tube Sliding part seal Piston rod Piston,,,,, Material Note plate lack painted Aluminum alloy Hard anodized arbon steel tube Inside: Hard chrome plated arbon steel tube Note) Inside: Hard chrome plated Note) NR JIS O-ring NR NR arbon steel Hard chrome plated ast iron Aluminum alloy casted hromated (Iron tube: ast iron) (In the case of aluminum alloy casted) Aluminum alloy casted hromated (Iron tube: ast iron) (In the case of aluminum alloy casted) Note) For items with a bore size of and corresponding to the lass Pressure Vessel Act, the material is Aluminum alloy and the note should state Hard anodized. 53 J JP J JM M M3 G G3 JM M M A S S D- -X A

6 S Series Weight/Aluminum Tube: (, ) asic weight asic type Foot type Rod side flange type Head side flange type Single clevis type Double clevis type (levis pin, otter pin) Trunnion type Additional weight per each mm of stroke Single knuckle Accessory Double knuckle bracket (Knuckie pin, otter pin) Rod end nut 4.85 (3.73) 6.48 (5.) 7.53 (6.4) 7.53 (6.4) 7.9 (6.8) 8.38 (7.6) 8. (7.86) (6.57). (9.9). (.57). (.57).7 (.86) 3. (.6) 3.7 (.) (3.3) 7.57 (5.83) 3.6 (9.4) 3.6 (9.4).6 (8.5) 3. (9.37) 3.7 (.) (kg) ( ): Denotes the non-lube and air-hydro type. The aluminum tubes with a bore size of or are subject to the lass Pressure Vessel Act. (ommon to lube and non-lube types) alculation example: SL- asic weight 7.57 (Foot type, ) Additional weight./ stroke ylinder stroke stroke x / =.5 kg Weight/Steel Tube Standard weight asic type Foot type Rod side flange type Head side flange type Single clevis type Double clevis (levis pin, otter pin) Trunnion type Additional weight per each mm of stroke Single knuckle Double knuckle (Knuckle pin, otter pin) Accessory bracket Rod end nut (kg) Precautions e sure to read this before handling the products. Refer to back page for Safety Instructions and pages 3 to for Actuator and Auto Switch Precautions. Warning Do not use the cylinder as a shock absorber. Using the cylinder as a shock absorber may cause damage. aution Do not open the cushion valve excessively. If the cushion valve is rotated excessively in the opening direction (counterclockwise), it could be damaged. e aware that the valve could slip out, or the threads becomes too short. Regarding the installation of a knuckle joint Please contact SM if a knuckle joint must be installed on the piston rod by using the rod end nut. Do not place tape or other objects onto the painted surface of the unit. The paint of the S cylinder is dried naturally, so it may peel off if tape or another object is placed onto it. The air cylinder uses the compressed air, but may become applicable to the regulations depending on the cylinder size. So, please fully understand the regulations before using the cylinder. Regulations regarding lass Pressure Vessel. As specified in Articles 4 and 44 of the Industrial Safety and Health Act, the individual examination shall be conducted in conformity with the lass Pressure Vessel Act. If the pressure vessel structure does not satisfy the lass Pressure Vessel Act, it shall not be transferred, leased or installed.. About lass Pressure Vessel The lass Pressure Vessel is a vessel (except for lass Pressure Vessel) that contains the gas with a gauge pressure of. MPa or more and satisfies the conditions shown below. q Vessel with an inside capacity of.4 m 3 or more w Vessel with a shell inside diameter of mm or more and a length of mm or more (extracted from Article -7 of the Industrial Safety and Health Act.) The following shows SM products that are applicable to the lass Pressure Vessel Act. 53 Regulations/lass Pressure Vessel Act Products applicable to the lass Pressure Vessel Act If the stroke exceeds the level shown below, the cylinder is applicable to the lass Pressure Vessel Act. ylinder stroke Periodical Self Inspection As specified in Article of the Industrial Safety and Health Act, it is obligated to conduct the periodical self inspection of the product applicable to the lass Pressure Vessel Act and keep the inspection records when using it. (Related laws: Articles 88 and 89 of the Ordinance on Safety of oilers and Pressure Vessels) After the use of the product applicable to the lass Pressure Vessel Act has been started, the self inspection of the following points is conducted once a year and the inspection results are recorded. heck the main body for damage. heck the lid tightening bolt for wear. 3 heck the pipe and valve for damage. 4 Products not applicable to the lass Pressure Vessel Act According to Articles 3 and 4 of the Industrial Safety and Health Act, when it is obvious that the product is not used in Japan, it is not necessary to examine the product in conformity with the lass Pressure Vessel Act. Additionally, when it is obvious that the product is not used in Japan, the product is exempted from the machine applicable to Articles 4 and 44 of the Industrial Safety and Health Act. Please order the air cylinder with -V put at the end of the part number. (The symbol -V is not put on a product with a stroke not applicable to the lass Pressure Vessel Act.) The cylinders manufactured in SM overseas factories are not examined in conformity with the lass Pressure Vessel Act. When using the cylinder in Japan, be sure to use the cylinder made in Japan that has been examined in conformity with the lass Pressure Vessel Act. 5 A safety valve is installed on the upstream side of the piping so that any pressure exceeding the maximum operating pressure of the cylinder applicable to the lass Pressure Vessel Act is not applied.

7 Air ylinder: Standard /, S Series # In the case of or product applicable to the lass Pressure Vessel # In the case of aluminum tube In the case of aluminum # In the case of or product applicable to the lass Pressure Vessel Act. J JP J JM M M3 G G3 JM M M A S S omponent Parts No. Rod cover Head cover Material plate plate Note lack painted lack painted 3 ylinder to Aluminum alloy Hard anodized tube to arbon steel tube Inside: Hard chrome plated Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer ast iron arbon steel ast iron earing alloy rass arbon steel Steel wire Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated Retaining plate bolt hromium molybdenum steel lack zinc chromated Spring washer ushion ring A ushion ring ushion valve Spacer A Spacer Air releasing Air releasing A heck ball Tie-rod reinforcement ring Wear ring Steel wire hromium molybdenum steel hrome bearing steel Resin lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Zinc chromated Zinc chromated Zinc chromated lack painted In the case of long strokes Aluminum tubing material of non-lube and air-hydro type is an aluminum alloy casted. Seal List No. Material Note 3 Wiper ring ushion seal Rod seal Piston seal NR 7 8 Valve seal Tube gasket 9 Piston gasket Retaining plate gasket 3 Guide gasket Seals are the same as for the lube-type. 5 Rod seal NR 6 Piston seal Seals are the same as for the lube-type. (Except cushion seal) No. Material Note 5 Rod seal NR 6 Piston seal Replacement Parts (Seal kit) For replacement parts no. (seal kit) for air cylinder standard type S series, refer to page 534. Seal kits does not include cushion seal, piston gasket and guide gasket because those are not replaceable parts. 533 D- -X a

8 S Series Standard/Replacement Parts/Seal Kit When ordering the replacement parts (seal kits) for standard type S series air cylinders, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: Wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). Standard () Kit no. S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS omponent @8, # Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Standard () Kit no. SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS omponent @8, # Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Kit no. SHA-PS SHA-PS SHA-PS omponent @8, # 534

9 With auto switch L F G D T Mounting asic type Foot type Rod side flange type Head side flange type Single clevis type Double clevis type enter trunnion type How to Order DS L Nil N H, mm mm mm mm mm uilt-in Magnet ylinder Model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. Example) DS- mm mm mm Port thread type Nil TN TF Rc NPT G ylinder stroke (Refer to Maximum Stroke on page 5.) M9W Nil 3 S n Auto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot ushion Applicable Auto Switches/Refer to pages 5 to 7 for further information on auto switches. Reed auto switch Solid state auto switch With auto switch (uilt-in magnet) Air ylinder DS Series,,,, Indicator light Yes Yes Yes No Yes No J K N R H Nil Number of auto switches pcs. 3 pcs. pc. n pcs. Made to Order (Refer to page 5 for details.) Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushon in rod side With cushon in head side With cushion in both sides ( type has no cushion.) If specifying more than one symbol, indicate them alphabetically. type has no cushion. No symbol indicates no cushion. Special function Load voltage Auto switch model Lead wire length (m) Electrical Wiring Pre-wired entry (Output) D A Tie-rod and Applicable load mounting mounting connector (Nil) (M) (L) (Z) 3-wire (NPN) M9N 5 V, V Grommet 3-wire (PNP) 4 V M9P I circuit Terminal conduit -wire 3-wire (NPN) -wire V 5 V, V V M9 G K I circuit 3-wire (NPN) M9NW Diagnostic indication 5 V, V I circuit Relay, 3-wire (PNP) M9PW (-color indicator) PL -wire V M9W 4 V 3-wire (NPN) M9NA Water resistant Grommet 5 V, V I circuit 3-wire (PNP) M9PA (-color indicator) -wire V M9A With diagnostic output (-color indicator) Magnetic field resistant (-color indicator) 4-wire (NPN) -wire (Non-polar) 5 V, V FF P3DWA I circuit 3-wire (NPN equivalent) 5 V A96 I circuit Grommet V V A93 5 V, V V or less V, V A A54 I circuit Relay, PL V or less A64 -wire 4 V Terminal V A33 PL conduit A34 V, V Relay, DIN terminal A44 PL Diagnostic indication (-color indicator) Grommet AW Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m Nil (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches than listed above, refer to page 563 for details. For details about auto switches with pre-wired connector, refer to pages 648 and 649. D-A9/M9/M9W/M9A/P3DWA auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) 535 J JP J JM M M3 G G3 JM M M A S S D- -X

10 DS Series Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion Ambient and fluid temperature Stroke length tolerance Mounting, Air,,.57 MPa.97 MPa.5 MPa to mm/s,. MPa.7 MPa Turbine oil,,.57 MPa.97 MPa.6 MPa.5 to mm/s Interchangeable None to (No freezing), type: 5 to or less st : +., 5 to, st : +.4,, to, st : +.8 asic type, Foot type, Rod side flange type, Head side flange type, Single clevis type, Double clevis type, enter trunnion type Symbol Double acting, Air cushion Made to Order Specifications lick here for details Maximum Stroke, Note Maximum stroke asic type, Head side flange type, Single clevis type, Double clevis type, enter trunnion type or less or less or less 9 or less : ylinders of the stroke range of 9 to are special products. Foot type, Rod side flange type or less or less or less 9 or less : ylinders of the stroke range of 9 to are special products. Symbol Specifications -XA hange of rod end shape -X5 Oversized rod cylinder -X3 Special port location -X4 With heavy duty scraper -X6 Piston rod and rod end nut made of stainless steel -X8 Adjustable stroke cylinder/adjustable extension type -X9 Adjustable stroke cylinder/adjustable retraction type -X Dual stroke cylinder/double rod type -X Dual stroke cylinder/single rod type -X4 hange of trunnio bracket mounting position -X5 hange of tie-rod length -X Fluororubber seal -X6 levis pins with flat washer -X7 Double clevis pin and double knuckle pin made of stainless steel -X Rod side trunnion -X35 With coil scraper -X68 Hard chrome plated stainless steel rod -X86 With rod end bracket Refer to pages 56 to 563 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no. A 5

11 Air ylinder DS Series Principal Parts Material and Surface Treatment Material over plate Note lack painted Tube Sliding part seal,,, type type type Aluminum alloy NR NR NR Hard anodized JIS O-ring Piston rod Piston arbon steel Aluminum alloy casted Hard chrome plated hromated Foot type, Rod side flange type: In the case of bore size of and, the stoke range is to. In the case of, piston seals of the stroke range to are NLP. In the case of bore size and, piston seals are NLP. J JP J JM M Weight (kg) M3 asic type G Foot type Rod side flange type asic Head side flange type weight Single clevis type Double clevis (levis pin, otter pin) Trunnion type Additional weight per each stroke G3 JM M M Accessory bracket Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut A S Mounting racket Part No. Foot type Flange type Single clevis type Double clevis type S-L S-F S- S-D S-L4 S-F4 S-4 S-D4 S-L6 S-F6 S-6 S-D6 S-L8 S-F8 S-8 S-D8 S-L S-F S- S-D Order two foot brackets per cylinder. When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. S Accessory For details about the single knuckle joint, double knuckle joint, knuckle pin, clevis pin, and rod end nut, refer to page 547. D- -X 537

12 DS Series onstruction () Foot type: Rod side flange type, : In the case of to st : In the case of to st () In the case of, :,, only omponent Parts No Rod cover Head cover ylinder tube Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion ring ushion valve Spacer A Spacer Air releasing Air releasing A heck ball Auto switch Set screw Switch mounting bracket Switch mounting screw Magnet Wear ring Material plate plate Aluminum alloy Aluminum alloy casted arbon steel ast iron earing alloy rass arbon steel Steel wire hromium molybdenum steel Steel wire hromium molybdenum steel hrome bearing steel hromium molybdenum steel Aluminum alloy opper wire Resin Note lack painted lack painted Hard anodized hromated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Zinc chromated Zinc chromated Zinc chromated Zinc chromated Nickel plated Seal List No. Material NR Note () (For lube-type, refer to page 5.) 8 Wiper ring 9 ushion seal Rod seal 3 Piston seal 3 Valve seal NR 33 Tube gasket 34 Piston gasket 35 Retaining plate gasket Guide gasket Seals except # and # are the same as lube type. 3 Rod seal Piston seal Seals except # and # are the same as lube type. No. Material Note Rod seal 3 Piston seal NR Replacement Parts (Seal kit) For replacement part no. (seal kits) of cylinder with auto switch DS series, refer to page 5. Seal kits does not include cushion seal, piston gasket and guide gasket because those are not replaceable parts. a 538

13 Air ylinder S Series With Auto Switch/Replacement Parts/Seal Kit When ordering the replacement parts (seal kits) for the DS series cylinder with auto switches, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). () Kit no. S-A-PS S-A-PS S-A-PS DS-A-PS DS-A-PS Kit no. SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS Kit no. DSLA-PS DSLA-PS DSLA-PS Kit no. SHA-PS SHA-PS SHA-PS omponent part #, #, #, #3, #5 Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) omponent part #, #, #, #3, #5 Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) () omponent part #, #, #, #3, #5 Foot type, Rod side flange type:, to stroke, to stroke Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) omponent part #, #, #, #3, #5 J JP J JM M M3 G G3 JM M M A S S 5 D- -X

14 S Series asic : S type (S), type (SN), type (SH) x P ZZ + l + Stroke ZZ + Stroke With auto switch: DS ~= ~ = d ~ = d x P ZZ + l + Stroke ZZ + Stroke Stroke range A AL D E EA F to to to to to to to Without rod boot H ZZ d e f h l ZZ stroke stroke stroke stroke stroke stroke stroke The minimum stroke with rod boot is mm or more. FA G J 6 M4 x.5 6 M4 x M6 x M8 x M x.5 3 M4 x.5 3 M x.5 K KA M MM 7 M x.5 7 M x.5.5 M x.5 35 M x.5 35 M x M56 x 5.5 M64 x With Auto Switch: to Only Stroke range S Up to Up to Up to 6 Up to 5 Up to 9 N Without rod boot ZZ P S ZZ Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 56. Refer to Minimum Stroke for Auto Switch Mounting on page 56. 5

15 Air ylinder S Series Foot : SL type (SL), type (SLN), type (SLH) x P ZZ + l + Stroke L ZZ + Stroke Long stroke ZZ + l + Stroke L ZZ + Stroke With auto switch: DSL ~ = J d 4 x LD JP J JM x P M M3 G G3 d 4 x LD JM M M x P ~= A S S d 4 x LD ~ = ZZ + l + Stroke L ZZ + Stroke Stroke range * Long stroke range A AL D E EA F FA G Up to to Up to to Up to to Up to to Up to to Up to to Up to to Without rod boot RY S X Y H ZZ d e f h l ZZ stroke stroke stroke stroke stroke stroke stroke 466 The minimum stroke with rod boot is mm or more. J K KA LD LH LS LT LX LY Stroke range S LS Up to Up to Up to 6 Up to Up to 9 MM M4 x M x.5 35 M4 x M x.5 35 M6 x.5 M8 x.5 M x M x.5 M x.5 M x M4 x M56 x 49 M x M64 x 49 With Auto Switch: to Only Without rod boot ZZ N P RT ZZ Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 56. Refer to Minimum Stroke for Auto Switch Mounting on page D- -X

16 S Series Rod Side Flange : SF type (SF), type (SFN), type (SFH) x P 4 x FD ZZ + l + Stroke ZZ + Stroke Long stroke x P 4 x FD ZZ + l + Stroke ZZ + Stroke With auto switch: DSF x P ~= 4 x FD ~ = d F ~ = d F d F Stroke range Up to Up to Up to Up to Up to Up to Up to Long Stroke ZZ + l + Stroke ZZ + Stroke A AL D E EA F FA F FD FT FX FY FZ G J K KA M S N P Without rod boot MM H ZZ d e f h l ZZ M4 x M x M4 x M x x M6 x M x Stroke M8 x M x M x M x M4 x M56 x x M x M64 x Stroke 384 Long stroke range M M RT RY to to to to to to to The minimum stroke with rod boot is mm or more. Without rod boot ZZ ZZ With Auto Switch: to Only Stroke range S Up to Up to Up to 6 Up to 5 Up to 9 Without rod boot ZZ ZZ Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 56. Refer to Minimum Stroke for Auto Switch Mounting on page

17 Air ylinder S Series Head Side Flange : SG type (SG), type (SGN), type (SGH) x P 4 x FD J d F JP J ZZ + l + Stroke ZZ + Stroke JM M M3 x P ~= 4 x FD G G3 d ~ = ~ = F JM M ZZ + l + Stroke ZZ + Stroke M A S S Stroke range * Up to Up to Up to Up to Up to Up to Up to A AL D 7 E 5 5 EA F Without rod boot S H ZZ d e f h l ZZ stroke. stroke. stroke. stroke. stroke stroke.7 stroke The minimum stroke with rod boot is mm or more. FA F FD FT FX FY FZ G J K KA MM M4 x.5 M4 x.5 M6 x.5 M8 x.5 M x.5 M4 x.5 M x M x.5 M x.5 M x.5 M x.5 M x.5 M56 x M64 x With Auto Switch: to Only Stroke range S Up to Up to Up to 6 Up to 5 Up to 9 Without rod boot ZZ ZZ Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 56. Refer to Minimum Stroke for Auto Switch Mounting on page 56. N P D- -X

18 S Series Single levis : S type (S), type (SN), type (SH) x P Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke With auto switch: DS x P ~= ~ = ~ = d d Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke Stroke range A AL DH T X D E EA F FA G J K KA L MM N P RR Up to M4 x M x Up to M4 x M x Up to M6 x M x Up to M8 x.5 4 M x Up to M x.5 46 M x Up to M4 x M56 x Up to M x.5 65 M64 x With Auto Switch: to Only Without rod boot Stroke range Without rod boot S U S H Z ZZ d e f h l Z ZZ Z ZZ Z ZZ stroke. stroke Up to Up to stroke. stroke Up to 6 Up to stroke Up to stroke Dimensions except mentioned above are the same as stroke standard type. For the auto switch mounting position and its mounting The minimum stroke with rod boot is mm or more. height, refer to page 56. Refer to Minimum Stroke for Auto Switch Mounting on page

19 Air ylinder S Series Double levis : SD type (SD), type (SDN), type (SDH) x P D hole H Shaft d9 J JP d J JM Z + l + Stroke ZZ + l + Stroke With auto switch: DSD x P Z + Stroke ZZ + Stroke D hole H Shaft d9 ~= M M3 G G3 JM ~ = M d ~ = M Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke A S Note) levis pin and cotter pin are shipped together. S Stroke range A AL DH T X Z Up to Up to Up to Up to Up to Up to Up to D E EA F FA G J K KA L MM N P RR M4 x.5 M4 x M x.5 M x M6 x M x M8 x.5 M x M x.5 M x M4 x.5 M x M56 x M64 x Without rod boot Without rod boot S U Stroke range S H Z ZZ d e f h l Z ZZ Z ZZ Z ZZ stroke. stroke Up to Up to stroke. stroke Up to 6 Up to stroke Up to stroke Dimensions except mentioned above are the same as stroke standard type. For the auto switch mounting position and its mounting The minimum stroke with rod boot is mm or more. height, refer to page 56. Refer to Minimum Stroke for Auto Switch Mounting on page With Auto Switch: to Only 5 D- -X

20 S Series enter Trunnion : ST type (ST), type (STN), type (STH) Z + l + / stroke Z + / stroke x P h + l ZZ + l + Stroke ZZ + Stroke With auto switch: DST Z + l + / stroke Z + / stroke x P ~= ~ = d ~ = d h + l ZZ + l + Stroke ZZ + Stroke Stroke range A AL D E EA F FA G J K KA M MM N P R S TDe8 TT TX 5 to M4 x M x to M4 x M x to M6 x.5 7 M x to M8 x M x to M x M x to M4 x M56 x to M x.5 65 M64 x With Auto Switch: to Only Without rod boot Without rod boot TY TZ Stroke range S H Z ZZ d e f h l Z ZZ Z ZZ Z ZZ stroke 8 UP to stroke 8 UP to stroke UP to stroke 8.5 UP to stroke 8.5 UP to stroke Dimensions except mentioned above are the same as stroke standard type. For the auto switch mounting position and its mounting The minimum stroke with rod boot is mm or more. height, refer to page 56. (The minimum stroke with rod boot, but for bore size and is 35 Refer to Minimum Stroke for Auto Switch Mounting on mm or more.) page

21 S Series Accessory racket Dimensions I Single Knuckle Joint Applicable Part no. bore size A A E L MM I- I-4 I-6 I-8 I- I M x.5 M x.5 M x.5 M x.5 M x.5 M56 x I M64 x Y Double Knuckle Joint ND hole H Shaft d9 NDH Material: ast iron NX RR U Material: ast iron Applicable Part no. bore size A E L MM NDH NX NZ RR U Y M x Y M x Y M x Y M x Y- 8 7 M x Y M56 x Y- 9 5 M64 x Use a single knuckle joint or a double knuckle joint individually. (Screw it entirely over the rod end threads and tighten it.) Extend the dimensions of A, H. when using a single/double knuckle joint together with a rod end nut. Pin and cotter pin are attached for double knuckle joint. The rod end bracket type is available as Made to Order -X86 when ordering the cylinder and attached mounting brackets. Refer to page 855. Knuckle Pin, levis Pin l x d Material: arbon steel Applicable bore d Applicable Part no. size Dd9 L l m (Drill through) cotter pin.65 IY x.65 IY x.8 IY x.8 IY-8, x 55.8 IY x 65. IY x 8 IY- includes a pin and cotter pins. Rod End Nut Applicable bore Part no. size NT- NT-6 NT-8 NT- NT-5 NT-, d M x.5 M x.5 M x.5 M x.5 M56 x M64 x Material: H D J JP J JM M M3 G G3 JM M M A S S 547 D- -X

22 Symbol Nil F With auto switch uilt in magnet ( to ) (uilt-in magnet) Mounting L F T asic type Foot type Rod side flange type enter trunnion type,,, Tubing material Aluminum tube Steel tube Steel tube SW DSW Double rod type Tubing material Stroke range With switch or less or less or less Without switch or less or less or less or less Note) or less or less or less L L 9 or less or less or less Refer to page 549 for the maximum strokes. Note) For items corresponding to the lass Pressure Vessel Act, the material is aluminum alloy. uilt-in magnet cylinder model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DSW- Lead wire length symbols:.5 m Nil (Example) M9NW m M (Example) M9NWM How to Order Port thread type Nil Rc TN NPT TF G, mm mm mm mm mm mm mm mm mm mm It is not available with auto switch. Nil N H ylinder stroke (Refer to Maximum Stroke on page 549.) V M9W Number of auto swithes Nil pcs. 3 3 pcs. S pc. n n pcs. Auto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot in one side Rod boot in both sides ushion Applicable Auto Switches/Refer to pages 5 to 7 for further information on auto switches. 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ J K JJ KK N R H Nil Nylon tarpaulin Heat resistant tarpaulin Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushion in rod side With cushion in head side With cushion in both sides ( type has no cushion.) If specifying more than one symbol, indicate them in alphabetically. type has no cushion. No symbol indicates no cushion. Special function Load voltage Auto switch model Lead wire length (m) Electrical Wiring Tie-rod and entry (Output) D A mounting mounting (Nil) (M) (L) (Z) 3-wire (NPN) M9N 5 V, V Grommet 3-wire (PNP) 4 V M9P -wire V M9 Terminal conduit 3-wire (NPN) -wire 5 V, V V G K 3-wire (NPN) M9NW Diagnostic indication 5 V, V Yes 3-wire (PNP) M9PW (-color indicator) -wire V M9W 4 V 3-wire (NPN) M9NA Water resistant Grommet 5 V, V 3-wire (PNP) M9PA (-color indicator) -wire V M9A With diagnostic output (-color indicator) Magnetic field resistant (-color indicator) 4-wire (NPN) -wire (Non-polar) 5 V, V FF P3DWA 3-wire(NPN equivalent) 5 V A96 Yes V V A93 Grommet No 5 V, V V or less A Yes V, V A54 No V or less A64 -wire 4 V Terminal V A33 conduit A34 Yes V, V DIN terminal A44 Diagnostic indication (-color indicator) Grommet AW Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. Reed auto switch Solid state auto switch Solid state auto switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed above, refer to page 563 for details. For details about auto switches with pre-wired connector, refer to pages 648 and 649. D-A9/M9/M9W/M9A/P3DWA auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) 548 Air ylinder: Double Rod SW Series /:,,,,,, :,, For the aluminum tubing of bore sizes, and, a new S series (P.565) model is now available with reduced weight and self weight Indicator light deflection. Please consider using the S series. Made to Order (Refer to page 549 for details.) lass Pressure Vessel (Subject to or not subject to) Nil Applicable V Not applicable This indicates whether or not the cylinder stroke is applicable to the lass Pressure Vessel Act and whether or not the product is made in Japan. -V is not put on a product with a stroke not applicable to the lass Pressure Vessel Act. For details, refer to page 53. Pre-wired Applicable load connector I circuit I circuit I circuit I circuit I circuit I circuit I circuit Relay, PL Relay, PL PL Relay, PL

23 Air ylinder: Double Rod SW Series Symbol Air cushion Made to Order Specifications lick here for details Symbol Specifications -XA hange of rod end shape -X6 Heat-resistant cylinder ( to ) -X4 With heavy duty scraper -X5 Heat resistant cylinder ( ) -X6 Piston rod and rod end nut made of stainless steel -X4 hange of trunnion bracket mounting position -X5 hange of tie-rod length -X Rod side trunnion -X35 With coil scraper Refer to pages 56 to 563 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no. Specifications, Fluid Air Turbine oil Proof pressure.57 MPa Note) Max. operating pressure Min. operating pressure Piston speed ushion Ambient and fluid temperature.97 MPa.5 MPa to mm/s Interchangeable Without switch to 7 (No freezing).97 MPa.6 MPa.5 to mm/s None 5 to With switch to (No freezing) Stroke length tolerance st or less: +. 5 to, st : +.4, to, st : +.8 Mounting asic type, Foot type, Rod side flange type, enter trunnion type Note) Item corresponding to lass Pressure Vessel Act is.46 MPa. Maximum Stroke Tubing material Mounting bracket,, Accessory Option Aluminum tube Steel tube Without switch With switch Without switch asic type, Foot type, Rod side flange type, enter trunnion type or less or less or less or less or less 9 or less Note ) Mounting asic type Foot type Rod end nut Single knuckle joint Double knuckle joint (levis pin, otter pin) Rod boot or less or less or less or less Note ) or less Rod side flange type Note ) For models with a bore size of with auto switches, strokes of 999 to are available as special orders. Note ) The tubing material of items with a bore size of and corresponding to the lass Pressure Vessel Act is aluminum tubing. For details about part numbers and dimensions, refer to page 547. (For rod boots, refer to page 553.) enter trunnion type Mounting racket Part No. Foot type SW-L SW-L4 SW-L6 SW-L8 SW-L SW-L5 SW-L Flange type S-F S-F S-F6 S-F8 S-F S-F5 S-F Order two foot brackets per cylinder. J JP J JM M M3 G G3 JM M M A S S Rod oot Material Symbol J K Material Nylon tarpaulin Heat resistant tarpaulin Maximum ambient temperature 7 Maximum ambient temperature for the rod boot itself. 549 D- -X A

24 SW Series Principal Parts Material and Surface Treatment Tube Sliding seal Piston over,,,,, Piston rod Material plate Aluminum alloy arbon steel tube arbon steel tube Note) NR NR NR arbon steel ast iron (With auto switch: Aluminum alloy casted) Aluminum alloy casted (Iron tube: ast iron) Aluminum alloy casted (Iron tube: ast iron) Note lack painted Hard anodized Hard chrome plated Hard chrome plated Note) JIS O-ring Hard chrome plated hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) In the case of an auto switch with bore sizes and, tubing material is aluminum alloy (hard anodized). Piston seal is NLP. Note) For items with a bore size of and corresponding to the lass Pressure Vessel Act, the material is Aluminum alloy and the note should state Hard anodized. Weight/Aluminum Tube: (, ) asic type 6.5 (5.8) 9.6 (8.) 6.65 (4.79) (kg) asic weight Foot type Rod side flange type 8.4 (6.9) 9.9 (7.96).4 (.64) 4.6 (3.) 9. (7.) 33.4 (3.8) Trunnion type.64 (9.4) 5.35 (3.85) 34.5 (3.9) Add l weight per each mm stroke Single knuckle Accessory bracket Double knuckle (Knuckle pin, otter pin) Rod end nut ( ): Denotes the non-lube and air-hydro type. alculation: (Example) SWL- asic weight 8.4 (Foot type, ) Additional weight.57/ stroke ylinder stroke stroke x / =.99 kg Weight/Steel Tube asic weight asic type Foot type Trunnion type Add l weight per each mm stroke Accessory bracket Rod side flange type Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut (kg)

25 Air ylinder: Double Rod SW Series onstruction, With auto switch omponent Parts No. Rod cover ylinder tube Material to Aluminum alloy to arbon steel tube type Note lack painted Hard anodized Inside: Hard chrome plated Aluminum tube Piston Piston rod A Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer ast iron arbon steel arbon steel ast iron earing alloy rass arbon steel Steel wire Hard chrome plated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated Retaining plate bolt hromium molybdenum steel lack zinc chromated Spring washer ushion ring A ushion valve Spacer A Air releasing Air releasing A heck ball Magnet Steel wire hromium molybdenum steel hrome bearing steel lack zinc chromated Zinc chromated Electroless nickel plated Zinc chromated In the case of the aluminum tube of non-lube and airhydro type, piston material is an aluminum alloy casted. In the case of auto switch bore size and, piston material is aluminum alloy casted and tubing material is aluminum alloy (hard anodized). For items with a bore size of and corresponding to the lass Pressure Vessel Act, the material is Aluminum alloy and the note should state Hard anodized. Aluminum tube Steel tube Seal List Auto switch No. Material Wiper ring ushion seal Rod seal 3 Piston seal 4 Valve seal 5 Tube gasket NR 6 Piston gasket 7 Retaining plate gasket 8 Guide gasket 3 Rod seal Piston seal NR With auto switch to, Note Seals are the same as lube type. Seals are the same as lube type. No. Material Note Rod seal 3 Piston seal NR (With switch) Seals except # are the same as lube type. No. Material Note 3 Piston seal NR Replacement Parts (Seal kit) For replacement parts no. (seal kits) of double rod type cylinder for the SW series, refer to page 55. Seal kits does not include cushion seal, piston gasket and guide gasket because those are not replaceable parts. 55 J JP J JM M M3 G G3 JM M M A S S D- -X a

26 SW Series Double Acting, Double Rod/Replacement Parts /Seal kit When ordering the replacement parts (seal kits) for the SW series double rod type cylinder, indicate the order number listed in the table at right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). Kit no. SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS omponent Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) with Auto Switch Kit no. SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS with Auto Switch Kit no. SW-A-PS SW-A-PS SW-A-PS DSWA-PS DSWA-PS omponent It is not available with auto switch. Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) omponent @7, # Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Kit no. SWHA-PS SWHA-PS SWHA-PS omponent A 55

27 d Air ylinder: Double Rod SW Series asic : SW type (SW), type (SWN), type (SWH) x P J JP J (One side) ZZ + stroke H + Stroke JM M M3 e G G3 l f h + l ZZ + l + stroke ( on one side) JM M (oth sides) MM FA G P G FA MM M A E e D D e E S d d S AL A K l h + l f N ZZ + l + stroke N M f l + Stroke K h + l + Stroke AL A Stroke range Without rod boot A AL D E EA F FA G J K KA M MM N P S Up to to M4 x M x.5 35 Up to to M4 x M x.5 35 Up to to M6 x M x Up to to M8 x M x Up to to M x M x Up to to M4 x M56 x 49 4 Up to to M x M64 x With Auto Switch: to Only Without Without rod boot (Single side) (oth sides) Stroke range rod boot (Single side) (oth sides) S H ZZ d e f h l ZZ ZZ Without rod boot ZZ ZZ ZZ stroke 34 4 Up to to stroke 34 4 Up to to stroke Up to to stroke 9 47 Up to to stroke 9 47 Up to 9 to stroke Refer to Minimum Stroke for Auto Switch Mounting on page stroke D- -X

28 d SW Series Foot : SWL type (SWL), type (SWLN), type (SWLH) x RcP ZZ + stroke H + Stroke h + l l f e 4 x LD L ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to A AL D 7 E 5 5 EA F FA G J M4 x.5 M4 x.5 M6 x.5 M8 x.5 M x.5 M4 x.5 M x.5 K KA LD LH LS LT LX 8 3 LY MM M x.5 M x.5 M x.5 M x.5 M x.5 M56 x M64 x N P S X 8 Y 5 Without rod boot H ZZ d (Single side) e f h l. stroke. stroke. stroke. stroke. stroke.7 stroke.7 stroke ZZ 34 (oth sides) ZZ With Auto Switch: to Only Stroke range Without rod boot S LS Without rod boot ZZ Up to Up to Up to Up to Up to 9 to to to to to Refer to Minimum Stroke for Auto Switch Mounting on page 56. (Single side) ZZ (oth sides) ZZ

29 d Air ylinder: Double Rod SW Series Rod Side Flange : SWF type (SWF), type (SWFN), type (SWFH) 4 x FD x RcP J JP J ZZ + stroke H + Stroke JM M M3 G e G3 JM l f h + l ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) M M A Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to A AL D 7 E 5 5 EA F FA FD FT FX FY 8 3 FZ G J M4 x.5 M4 x.5 M6 x.5 M8 x.5 M x.5 M4 x.5 M x.5 S S K KA M MM M x.5 M x.5 M x.5 M x.5 M x.5 M56 x M64 x N P S Without rod boot H ZZ d (Single side) e f h l. stroke ZZ 34 (oth sides) ZZ 4. stroke. stroke. stroke. stroke.7 stroke.7 stroke With Auto Switch: to Only Stroke range Without rod boot S Without rod boot ZZ Up to Up to Up to Up to Up to 9 to to to to to Refer to Minimum Stroke for Auto Switch Mounting on page 56. (Single side) ZZ (oth sides) ZZ D- -X 555

30 e d SW Series enter Trunnion : SWT type (SWT), type (SWTN), type (SWTH) Z + / stroke x RcP Z + / stroke ZZ + stroke H + Stroke Z + l + / stroke l f h + l ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) Stroke range Without rod boot A AL D E EA F FA G J K KA M MM N P 5 to to M4 x M x.5 35 to 35 to to to to 35 to to 35 to to to to 35 to M4 x.5 M6 x.5 M8 x.5 M x.5 M4 x.5 M x M x.5 M x.5 M x.5 M x.5 M56 x M64 x TDe TT TX TY TZ H Without rod boot (Single side) (oth sides) Z ZZ d e f h l Z ZZ Z ZZ stroke. stroke. stroke. stroke. stroke.7 stroke.7 stroke R S With Auto Switch: to Only Stroke range Without rod boot (Single side) (oth sides) S Without rod boot Z ZZ Z ZZ ZZ 5 to to 35 to to to 9 to to 35 to to to Refer to Minimum Stroke for Auto Switch Mounting on page

31 With auto switch L F G D T With auto switch (uilt-in magnet) Mounting asic type Foot type Rod side flange type Head side flange type Single clevis type Double clevis type enter trunnion type uilt-in magnet cylinder model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DSLQ- Air ylinder: Low Friction SQ Series,, S L DS L Low friction type Q Q linder tube bore size mm mm mm Port thread type Nil TN TF How to Order Rc NPT G ylinder stroke Refer to Standard Stroke on page V 4 V For the aluminum tubing of bore sizes, and, a new S series (P.565) model is now available with reduced weight and self weight deflection. Please consider using the S series. M9W Number of auto switches Nil pcs. S pc. 3 3 pcs. n n pcs. Auto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot ushion Applicable Auto Switches/Refer to pages 5 to 7 for further information on auto switches. Reed auto switch Solid state auto switch Special function Diagnostic indication (-color indicator) Water resistant (-color indicator) With diagnostic output (-color indicator) Magnetic field resistant (-color indicator) Electrical entry Grommet Terminal conduit Grommet Grommet Indicator light Yes Yes Yes No Yes No Wiring (Output) 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) -wire 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire 4-wire (NPN) -wire (Non-polar) 3-wire(NPN equivalent) J K A R H Nil Made to Order (Refer to page 558 for details.) Nylon tarpaulin Heat resistant tarpaulin With cushion in both sides With cushion in rod side With cushion in head side Without cushion If specifying more than one symbol, indicate them alphabetically. Load voltage Auto switch model Lead wire length (m) D A and mounting (Nil) (M) (L) (Z) 5 V, V V 5 V, V V 5 V, V V 5 V, V V 5 V, V 5 V V V 5 V, V V or less V, V V or less V Tie-rod mounting M9N M9P M9 M9NW M9PW M9W M9NA M9PA M9A FF P3DWA A96 A93 A A54 A64 AW G K A33 A34 A44 Pre-wired connector Applicable load I circuit I circuit I circuit I circuit Relay, PL I circuit I circuit I circuit Relay, PL -wire 4 V Terminal conduit PL DIN terminal V, V Relay, PL Diagnostic indication (-color indicator) Grommet Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m Nil (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches than listed above, refer to page 563 for details. For details about auto switches with pre-wired connector, refer to pages 648 and 649. D-A9/M9/M9W/M9A/P3DWA auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) 557 J JP J JM M M3 G G3 JM M M A S S D- -X

32 SQ Series Designed with a low sliding resistance of the piston, this air cylinder is ideal for applications such as contact pressure control, which requires smooth movements at low pressures. Application Example Low friction cylinder is used in combination with precision regulator (IR series). Driving roller Widing roller Precision regulator Precision regulator (Moving object) Low sliding resistance Min. operating pressure.5 MPa Auto switch mounting is possible. Symbol Double acting, Without cushion Specifications Action Direction of low friction Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Allowable leakage ushion Lubrication Mounting In the case of w/ cushion, pressure inside cushion stroke is not included. Maximum Stroke Tubing material Mounting bracket Aluminum tube (with auto switch) asic type, Head side flange type Single clevis type, Double clevis type enter trunnion type Rod side flange type or less or less or less Double acting, Single rod oth directions Air.5 MPa.7 MPa.5 MPa Without auto switch: to 7 (No freezing) With auto switch: to (No freezing).5l/min (ANR) or less None (With cushion is available.) Not required (),, asic type, Foot type, Rod side flange type, Head side flange type, Single clevis type, Double clevis type, enter trunnion type Iron tube (without auto switch) asic type, Head side flange type Single clevis type Double clevis type enter trunnion type or less or less or less Foot type Rod side flange type or less or less or less Made to Order Specifications lick here for details Symbol Specifications -XA hange of rod end shape -X3 Special port location -X4 hange of trunnion bracket mounting position -X5 hange of tie-rod length -X6 levis pins with flat washer -X7 Double clevis pins made of stainless steel (Stainless steel 4) -X Rod side trunnion Refer to pages 56 to 563 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no. A 558

33 Air ylinder: Low Friction SQ Series Mounting racket Part No. Foot type S-L S-F S- Flange type Single clevis type Double clevis type S-D Order two foot brackets per cylinder. Accessory Mounting type Standard equipment levis pin Rod end nut Single knuckle joint Option Double knuckle joint (Knuckle pin, otter pin) Rod boot asic type Foot type S-L4 S-F4 S-4 S-D4 Principal Parts Material and Surface Treatment over Tube Sliding part seal Piston rod Piston Material plate Aluminum alloy (with auto switch) arbon steel tube (without auto switch) NR arbon steel Aluminum alloy casted S-L6 S-F6 S-6 S-D6 Rod side Head side Single Double ente flange type flange type clevis type clevis type trunnion type Note lack painted Hard anodized Inside: Hard chrome plated Hard chrome plated hromated Weight/Steel Tube (For aluminum tube [with auto switch], refer to page 537.) asic weight asic type Foot type Rod side flange type Head side flange type Single clevis type Double clevis type Trunnion type Additional weight per each mm of stroke Accessory bracket Single knuckle Double knuckle (With pin) alculation: (Example) SLQ, asic weight 8.4 (Foot type, ) Additional weight 3.58/ stroke ylinder stroke stroke, x / =.94 kg Sliding Resistance (kg) Rod oot Material Symbol Material J Nylon tarpaulin K Heat resistant tarpaulin Maximum ambient temperature for the rod boot itself. J JP J JM M M3 G G3 JM M M A S S Sliding resistance (MPa) (onverted into cylinder operating pressure) Pressure (MPa) 5 D- -X

34 SQ Series onstruction omponent Parts No. Material Note No. Material Note Rod cover Head cover ylinder tube Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion ring ushion valve Wear ring With auto switch plate plate Aluminum alloy arbon steel tube Aluminum alloy casted arbon steel ast iron earing alloy rass arbon steel Steel wire hromium molybdenum steel Steel wire Resin lack painted lack painted Hard anodized Hard chrome plated hromated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Seal List Wiper ring ushion seal Rod seal Piston seal Valve seal Tube gasket Piston gasket Retaining plate gasket Guide gasket NR It is used only in the case of w/ cushion type. Low Friction Kit no. SQA-PS SQA-PS SQA-PS omponent @5 Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-L-5(5g), GR-L-(g), GR-L-(g) Seal kits does not include cushion seal, piston gasket and guide gasket because those are not replaceable parts. Dimensions: According to Mounting rackets External dimensions for each mounting bracket other than basic type are the same as standard type. Refer to pages 5 to 546. asic : SQ x P EA ZZ + Stroke Stroke range Up to Up to Up to A 56 AL D E EA F G J M4 x.5 M4 x.5 M6 x.5 K KA 3 3 M MM M x.5 M x.5 M x.5 N P / / 3 /4 S 6 H ZZ a 5

35 S Series Auto Switch Mounting Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height and mounting type D-A3 D-G3/K3 D-A44 ~ Hs = D-F5/J/D-F5NT D-F5A/FF D-F5W/JW Auto switch Auto switch Applicable cable O.D. 6.8 to 9.6 Auto switch Applicable cable O.D. 6.8 to.5 ~ =Ht ~ =Ht ~ Hs = ~ Hs = Tie-rod mounting type D-M9/M9V D-M9W/M9WV D-M9A/M9AV D-A9/A9V D-A5/A6 D-P3DWA A A D-Z7/Z8 D-Y/Y69/Y7P/Y7PV D-Y7W/Y7WV D-Y7A Auto switch Auto switch ~ =Ht ~ =Ht ~ =Ht Ht ~ Hs = ~ Hs = Hs J JP J JM M M3 G G3 JM M M A S S Proper Auto Switch Mounting Position Auto switch model A A A A A A A The mounting position should be referred for reference only for the auto switch mounting position at the stroke end detection. Adjust the auto switch after confirming the operation to set actually. Low friction type (DSQ):,, Auto Switch Mounting Height Auto switch model D-M9 D-M9V D-M9W D-M9WV D-M9A D-M9AV D-M9 D-M9W D-M9A D-A9 D-A9V D-A9 D-A9V D-M9WV D-M9AV D-M9V Hs Ht Hs Ht Low friction type (DSQ):,, D-Z7/Z8 D-Y5/Y6 D-Y7P/Y7PV D-Y7W D-Y7WV D-Y7A D-Z7/Z8 D-Y5/Y6 D-Y7P D-Y7PV D-Y7W D-Y7WV D-Y7A Hs Ht D-A5 D-A6 D-A3 D-A44 D-G D-K D-A3 D-G D-K Hs D-AW D-A44 Ht D-F5W D-JW D-F5A D-F5 D-J D-FF D-A5 D-A6 D-AW Hs Ht D-F5NT D-F5 D-J D-F5W D-JW D-F5A D-FF D-F5NT Hs Ht D-P3DWA A D-P3DWA Hs Ht D- -X