Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Transcription

1 Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for designing machine. Cross-section of a cylinder tube is the same configuration regardless of w/ switch or w/o switch. uto switch mounting allows for flexible designing requirements 3 faces on ø, ø, and all faces including port side on ø, ø. 2 way basic mounting: Through-hole or both ends tapped asic mounting is 2 way. You can choose either through-hole or both ends tapped mounting. ttachable on sides (ø, ø) Non-rotating accuracy Non-rotating rod Hexagonal cross sectional shape piston rod for high non-rotation accuracy. ø, ø ± ø, ø ±0. ttachable on 3 sides (ø, ø) uto switch CUJ CU Standard Double acting Single rod Double rod W Standard stroke ong stroke ø ø ø ø ø ø ø ø ø ø ø ø,,,,,,,,, 3, 0,, 0 Stroke 3, 0,, 0,, 0, 0,, 0, 0,, 0,, 0, 0,, 0,, 0, 0, 0,,,,,,,,, 3, 0,, 0 Page 0 CQ2 RQ CQM MU Single acting Return/Extend,, ø ø ø ø, Non-rotating Rod Double acting Single rod K Double rod KW ø ø ø ø,,,,,,,,, 3, 0,, 0 2 nti-lateral oad Double acting Single rod S ø ø ø ø,,,,,,,,, 3, 0,, 0 D- Smooth cylinder (ow friction) Y Refer to est Pneumatics No. 3. ow-speed cylinder X Refer to est Pneumatics No. 3. Individual Technical data

2 Combinations of Standard Products and Made Series : Standard : Made to Order specifications : Special product (Contact for details.) : Not available Symbol Standard Standard Specification Series ction/ Type pplicable bore size Single rod Double acting Double rod (Standard) ø to ø Single rod/ Extension Single acting Single rod/ Retraction D - M - C - F F G D -, - - X X X X X3 XC XC XC XC XC XC3 X23 X2 X X2 X33 X3 uilt-in magnet With rubber bumper With boss on head end Foot, Flange Double clevis style Clean series Copper and Fluorine-free Heat-resistant cylinder ( to 0 C) Cold-resistant cylinder (0 to 0 C) ow-speed cylinder ( to 0 mm/s) Intermediate stroke (Using exclusive body) ow-speed cylinder ( to 0 mm/s) Piston rod, retaining ring, rod end nut made of stainless steel djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type With boss on rod side Change of piston rod end of double rod cylinder Fluororubber seal ong stroke of adjustable extension stroke cylinder (-XC) ong stroke of adjustable retraction stroke cylinder (-XC) Intermediate stroke of double rod type ong stroke of dual stroke single rod ø to ø ø to ø X With concave shape end boss on the cylinder tube head side Note ) rubber bumper comes as standard. Note 2) For ø and ø only. ( ) for ø and ø. ø, ø Note 3) Refer to est Pneumatics No. 3 for low-speed cylinders.

3 to Order Specifications Series K (Non-rotating rod) (ong stroke) S (nti-lateral load) Y Smooth cylinder (ow friction) (3) X ow-speed cylinder (3) Double acting Double acting Double acting Double acting Double acting Single rod Double rod Single rod Single rod Single rod Single rod ø to ø () () () CUJ CU CQ2 RQ CQM MU (2) (2) (2) (2) D- Individual Technical data

4 Series Specific Product Precautions e sure to read before handling. Refer to front matters and for Safety Instructions and pages 3 to for ctuator and uto Switch Precautions. Operating Precautions Caution. ll loads to piston rod must be applied in axial direction only. When a lateral load is applied unavoidably, ensure that it should not exceed the allowable lateral load to the rod end as specified in graph () to (). When installing a cylinder, centering should be required accurately. doption of guide mechanism is strongly recommended for the case when is used as stopper to prevent non-rotating piston rod from side loads. 2. When a workpiece is secured to the end of the piston rod, ensure that the piston rod is retracted entirely, and place a wrench on the portion of the rod that protrudes beyond the section. lso, tighten by giving consideration to prevent the tightening torque from being applied to the non-rotating guide. llowable ateral oad at Rod End Graph () Standard: Non-rotating Rod Type/Without uto Switch llowable lateral load W (N) Stroke ST Graph (3) nti-lateral oad Type/Without uto Switch (Mounting orientation: Horizontal) Graph (2) Standard: Non-rotating Rod Type/With uto Switch llowable lateral load W (N) Stroke ST Graph () nti-lateral oad Type/With uto Switch Retaining Ring Installation/Removal Caution. For installation and removal, use an appropriate pair of pliers (tool for installing a type C retaining ring). 2. Even if a proper plier (tool for installing type C retaining ring) is used, it is likely to inflict damage to a human body or peripheral equipment, as a retaining ring may be flown out of the tip of a plier (tool for installing a type C retaining ring). e much careful with the popping of a retaining ring. esides, be certain that a retaining ring is placed firmly into the groove of rod cover before supplying air at the time of installment. llowable lateral load W (N) llowable lateral load W (N) 3 2 ø ø ø ø Stroke ST Graph () ong Stroke/With & Without uto Switch llowable lateral load W (N) Stroke ST Note ) Graph () to (): Rod end female thread Note 2) ateral load allowance varies depending upon rod end shape dimensions or load value (distance to the center of the gravity of load). Please consult with Stroke ST 0

5 Compact Cylinder: Standard Type Double cting, Single Rod Series ø, ø, ø, ø (uilt-in magnet) Mounting style F G D Through-hole/oth ends tapped common (Standard) Foot style Rod side flange style Head side flange style Double clevis style In the case of long strokes, use either ends tapped mounting or bracket mounting. Mounting brackets are shipped together, (but not assembled). Cylinder mounting bolts are not included. Order them separately referring to Mounting olt for on pages and., CDQS D D mm mm mm mm Cylinder stroke Standard stroke ong stroke,,,,,,,,,,, 3, 0,, 0 3, 0,, 0,, 0,, 0,, 0, 0,, 0,, 0, 0,, 0,, 0, 0, 0 For Manufacture of Intermediate Strokes, refer to page 2. ction D Double acting MW ody option <Standard stroke> Nil C M F Standard With rubber bumper oss on head side Combination of body options is available. pplicable uto Switch/Refer to pages 3 to 3 for further information on auto switches. Type Special function Electrical entry Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) Diagnostic indication (2-color indication) Grommet Yes 3-wire (PNP) 2-wire 3-wire (NPN) Water resistant (2-color indication) 3-wire (PNP) 2-wire 3-wire Grommet Yes (NPN equivalent) No 2-wire ead wire length symbols: 0. m Nil (Example) MNW m M (Example) MNWM 3 m (Example) MNW m Z (Example) MNWZ Solid state switch Reed switch Indicator light 2 V 2 V How to Order oad voltage DC V, V V V, V V V, V V V V C 0 V 0 V or less uto switch model Perpendicular MNV MPV MV MNWV MPWV MWV MNV MPV MV V 3V 0V Number of auto switches Nil S n 2 pcs. pc. n pcs. uto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. In-line MN MP M MNW MPW MW MN MP M 3 0 Made to Order Refer to page 2 for details. <ong stroke> With rubber bumper C Rod end female thread (Standard) With rubber bumper CM Rubber bumper is standard equipment for long stroke type. uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) CDQS-D ead wire length (m) 0. (Nil) (M) 3 () (Z) Pre-wired connector Solid state auto switches marked with are produced upon receipt of order. pplicable load Since there are other applicable auto switches than listed, refer to page for details. For details about auto switches with pre-wired connector, refer to pages 32 and 32. uto switches are shipped together (not assembled). Note) There is the case V/M V/M WV/M V type auto switches cannot be mounted on the port surface, depending on the cylinder s stroke and the fitting size for piping. Consult with for details. Relay, PC Relay, PC CUJ CU CQ2 RQ CQM MU D- Individual Technical data

6 Series JIS Symbol Made to Order Specifications (For details, refer to pages 33 to.) Symbol Specifications X Change of rod end shape X Heat-resistant cylinder ( to 0 C) (without an auto switch) X Cold-resistant cylinder (0 to 0 C) (without an auto switch) X ow speed cylinder ( to 0 mm/s) X Intermediate stroke (Using exclusive body) X3 ow speed cylinder ( to 0 mm/s) XC Piston rod, retaining ring, rod end nut made of stainless steel XC djustable stroke cylinder/djustable extension type XC djustable stroke cylinder/djustable retraction type XC Dual stroke cylinder/double rod type XC Dual stroke cylinder/single rod type XC3 With boss in rod side X2 Fluororubber seals X ong stroke of adjustable extension stroke cylinder (-XC) X2 ong stroke of adjustable retraction stroke cylinder (-XC) X3 ong stroke of dual stroke single rod X With concave shape end boss on the cylinder tube head side ody Option Description Rubber bumper pplication vailable for all standard models of double acting, single rod. Rubber bumper is standard equipment for long stroke type. Specifications ction Fluid ubrication Proof pressure Maximum operating pressure Double acting, Single rod ir Not required (Non-lube). MPa.0 MPa Minimum operating pressure 0.0 MPa 0.0 MPa mbient and fluid temperature Cushion Rod end thread Stroke length tolerance Mounting Piston speed Standard type llowable kinetic energy (J) With rubber bumper Stroke length tolerance does not include the deflection of the bumper. Only rubber bumper is available for the long stroke type. Theoretical Output IN OUT IN OUT IN OUT IN OUT Manufacture of Intermediate Stroke Part no. Standard stroke ong stroke Example Description Rod size Description Description Operating direction,, Without auto switch: to 0 C (No freezing) : to 0 C (No freezing) None, Rubber bumper Female thread Standard stroke: ong stroke: +. 0 Through-hole/oth ends tapped common 0 to 00 mm/s Piston area (mm 2 ) Spacer is installed in the standard stroke body. Refer to How to Order for the standard model no. (page ). Intermediate strokes by the mm interval are available by using spacers with standard stroke cylinders. to 2 to Intermediate strokes by the mm interval are available by using spacers with standard stroke cylinders., 3 to to to 2 Part no.: -D -0D with 3 mm width spacer inside. dimension is 2. mm. OUT ,, IN Operating pressure (MPa) Exclusive body (-X) to 2 to, 3 to to to 2 Part no.: -D-X Makes stroke tube. dimension is. mm. (N) Suffix -X to the end of standard model no. (page ). Dealing with the stroke by the mm interval by using an exclusive body with the specified stroke. Dealing with the stroke by the mm interval by using an exclusive body with the specified stroke. Refer to pages to for cylinders with auto switches. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket/part no. 2

7 Compact Cylinder: Standard Type Double cting, Single Rod Series Mass/Without uto Switch Cylinder stroke (g) 0 For standard stroke Calculation: (Example) D-DCM Cylinder mass: -D g Option mass: g Option mass: Rubber bumper 2 g Option mass: Double clevis style 2 g g Mass/With uto Switch (uilt-in magnet) (g) Cylinder stroke dditional Mass (g) Male thread Nut. 3 2 Rubber bumper (No need to add for long stroke) Foot style (Including mounting bolt) (3) () (3) (2) Rod side flange style (Including mounting bolt) () 0 () 3 (3) 0 () Head side flange style (Including mounting bolt) 3 Double clevis style (Including pin, snap ring, bolt) ( ): denotes the values of long stroke model. Mounting racket Part No. CUJ Foot () Flange Double clevis CU F0 -F0 -F0 -F0 -D0 -D0 -D0 -D0 CQ2 Note) When ordering foot bracket, order 2 pieces per cylinder. Note2) Parts belonging to each bracket are as follows. Foot or Flange style: ody mounting bolt Double clevis style: Clevis pin, Type C snap ring for axis, ody mounting bolt. RQ CQM MU Copper and Fluorine-free Series (For CRT manufacturing process) C(D)QS Mounting Stroke Copper and Fluorine-free Series D(C)(M) ø, ø, ø, ø To prevent the influence of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used in the component parts. Specifications ction Proof pressure Maximum operating pressure Cushion Mounting Piston speed Double acting, Single rod,,,. MPa.0 MPa None, Rubber bumper Through-hole/oth ends tapped common 0 to 00 mm/s D- Individual 3 Technical data

8 Series Clean Series (Standard stroke is only available.) C(D)QS Stroke D(M) Specifications ction Proof pressure Maximum operating pressure Rubber bumper Piping Piston speed Mounting uto switch Note) For details, please contact. Smooth Cylinder Y Refer to est Pneumatics No. 3. X Smooth Cylinder Double acting, Single rod ø, ø, ø, ø. MPa.0 MPa None Screw-in piping to 00 mm/s Through-hole/oth ends tapped common Mountable Smooth operation with a little sticking and slipping at low speed. Dual-side low friction operation is possible. ow-speed Cylinder ow-speed Cylinder Smooth operation with a little sticking and slipping at low speed. Can start smoothly with a little ejection even after being rendered for hours. Refer to est Pneumatics No. 3. Clean Series Relief type Vacuum type Mounting Mounting The type which is applicable for using inside the clean room graded Class 0 by making an actuator s rod section a double seal construction and discharging by relief port directly to the outside of clean room. Stroke D(C)(M) Stroke D(C)(M) Relief port For details, refer to the separate catalog Pneumatic Clean Series. Specifications Type ction Fluid Proof pressure Maximum operating pressure mbient and fluid temperature Cushion Rod end thread Stroke length tolerance Mounting Piston speed llowable leakage Minimum operating pressure Minimum operating pressure Specifications Type ction Fluid Proof pressure Maximum operating pressure mbient and fluid temperature Rubber bumper Rod end thread Stroke length tolerance Mounting Piston speed Minimum operating pressure Minimum operating pressure Pneumatic (Non-lube) Double acting, Single rod ir.0 MPa 0. MPa Without auto switch: to 0 C (No freezing) : to 0 C (No freezing) None, Rubber bumper Female thread Through-hole/oth ends tapped common 0 to 00 mm/s 0.l/min (NR) or less Stroke length tolerance does not include the deflection of the bumper. (MPa) Pneumatic (Non-lube) Double acting, Single rod ir. MPa.0 MPa Without auto switch: to 0 C (No freezing) : to 0 C None, Rubber bumper Female thread Standard stroke Through-hole/oth ends tapped common ø, ø: to 0 mm/s ø, ø: 0. to 0 mm/s Stroke length tolerance does not include the deflection of the bumper (MPa) 0.0

9 Compact Cylinder: Standard Type Double cting, Single Rod Series Construction asic style With rubber bumper (uilt-in magnet) ø, ø ong stroke ø, ø Component Parts No. Description Cylinder tube 2 Collar 3 Piston Piston rod Retaining ring Rod end nut Spacer for switch type umper umper ottom plate Material luminum alloy luminum alloy luminum alloy Stainless steel Carbon tool steel Carbon steel luminum alloy Urethane Urethane luminum alloy Note Hard anodized nodized Chromated Phosphate coated Nickel plated Chromated nodized Component Parts No. Description Collar ushing 3 Wear ring Magnet Rod seal Piston seal Tube gasket Material luminum alloy Oil-impregnated sintered alloy Resin NR NR NR Replacement Parts: Seal Kit (asic style) Kit no. -PS -PS -PS -PS Replacement Parts: Seal Kit (ong stroke) Kit no. --PS --PS --PS --PS Note nodized Contents Set of nos. above,, Contents Set of nos. above,, Seal kit includes,,. Order the seal kit, based on each bore size. (The long stroke type includes 2 tube gaskets.) Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g) CUJ CU CQ2 RQ CQM MU D- Individual Technical data

10 Series Mounting olt for without uto Switch Mounting method: Mounting bolt for through-hole mounting style of is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x pcs. O thread Mounting bolt Note ) The appropriate plain washer must be used for through-hole mounting. Note 2) Please contact for details concerning the mounting bolts to be used with ø and ø that exceed mm strokes, or ø and ø that exceed 0 mm strokes. Cylinder model C D Mounting bolt size D D M3 x M3 x D 3 M3 x 3. D 0 M3 x 0 D D 3DC 0DC DC 0 M3 x M3 x 0 M3 0DC Secure the cylinder by DC using the O screws that are provided with the 0DC cylinder tube. DC 0DC DC 0DC D D M3 x M3 x D 3 M3 x 3. D 0 M3 x 0 D D 3DC 0DC DC 0 M3 x M3 x 0 0DC Secure the cylinder by DC using the O screws that are provided with the 0DC cylinder tube. DC 0DC DC 0DC Cylinder model C D Mounting bolt size D D D D 3 0 M x M3 x M3 x 3 M3 x 0 D M3 x. D 0 M3 x 0 3D 0D D 0D DC 0 0 M3 x M3 x 0 M3 x M3 x 0 0DC DC Secure the cylinder by using the O screws that 0DC are provided with the cylinder tube. DC 0DC D D D D 3 0 M x M x 3 M3 x 0 M x D 0 M3 x 0. D M x 3D 0D D 0D DC 0DC 0 0 M3 x 0 M x M3 x 0 M x DC Secure the cylinder by 0DC using the O screws that are provided with the DC cylinder tube. 0DC 0DC 0DC Material: Chromium molybdenum steel

11 Compact Cylinder: Standard Type Double cting, Single Rod Series Mounting olt for CDQS with uto Switch Mounting method: Mounting bolt for through-hole mounting style of CDQS is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x pcs. O thread Mounting bolt Note ) The appropriate plain washer must be used for through-hole mounting. Note 2) Please contact for details concerning the mounting bolts to be used with ø and ø that exceed mm strokes, or ø and ø that exceed 0 mm strokes. ccessory For accessory bracket for Series, refer to page, since it is commonly used with Series CQ2. Single knuckle joint Double knuckle joint Pin for knuckle Rod end nut Cylinder model C D Mounting bolt size Cylinder model C D Mounting bolt size CDQSD CDQSD 3 M3 x M3 x 3 CDQSD CDQSD 3 0 M x 3 M3 x 0 CDQSD 0 M x 0 CDQSD M x. CDQSD M3 x CDQSD 0 M3 x 0 CDQSD 0 M x 0 CDQSD M x. CDQSD M3 x CDQSD 0 M3 x 0 CDQS3DC CDQS0DC CDQSDC CDQS0DC Secure the cylinder by CDQS3D CDQS0D CDQSD CDQS0D 0 0 M x M3 x 0 M x M3 x 0 CDQSDC using the O screws that CDQSDC are provided with the CDQS0DC CDQS0DC Secure the cylinder by cylinder tube. CDQSDC CDQSDC using the O screws that are provided with the CDQS0DC CDQS0DC cylinder tube. CDQSDC CDQSDC CDQS0DC CDQSD CDQSD 3 M3 x M3 x 3 CDQS0DC CDQSD CDQSD 0 M x 0 x CDQSD 0 M x 0 CDQSD 0 x 0. CDQSD M3 x CDQSD x CDQSD 0 M x 0 CDQSD 0 x 0. CDQSD M3 x CDQSD x CDQS3DC CDQS0DC CDQSDC CDQS0DC Secure the cylinder by CDQS3D CDQS0D CDQSD CDQS0D 0 0 x 0 x x 0 x CDQSDC using the O screws that CDQSDC are provided with the CDQS0DC CDQS0DC cylinder tube. CDQSDC CDQSDC Secure the cylinder by using the O screws that CDQS0DC CDQS0DC are provided with the CDQSDC CDQSDC cylinder tube. CDQS0DC CDQS0DC CDQS0DC CDQS0DC Material: Chromium molybdenum steel CUJ CU CQ2 RQ CQM MU D- Individual Technical data

12 Series Dimensions: ø to ø asic style (Through-hole/oth ends tapped common): /CDQS For the auto switch mounting position and its mounting height, refer to page. ø ø H thread effective depth C 2 x x øo counterbore R 2 x x O counterbore R Note) 2 x M x 0. uto switch Minimum lead wire bending radius x øn through Flat washer pcs. ø, ø + Stroke + Stroke Width across flats MM H C X asic Style ength with intermediate stroke () Spacer... The dimensions will be identical to those of the nearest long stroke. Those that exceed the standard stroke will have the long stroke dimensions. (2) Exclusive body (-X) dd stroke. lso, the stroke length that exceeds the standard stroke would be the long stroke dimension. Standard stroke range to to to 0 to 0 Standard stroke Without auto switch F F ong stroke range 3 to 0 3 to 0 to 0 to 0 ong stroke With/Without auto switch F Rod End Male Thread C D E H M3 x 0. M x 0. M x 0. M x.0 C I H K Standard stroke... M.. 2 N ong stroke O M x 0. M x 0. M x.0 M x.0 O.. Q.. MM M x 0. M x.0 M x. M x. R R Note ) For the following bore/stroke sizes through-hole is threaded over the entire length: asic style ø and ø; stroke, ø; to stroke, ø; to stroke, ø with auto switch built-in magnet; stroke. Note 2) Rubber bumper type has the same dimensions as those indicated above. For details about the rod end nut and accessory brackets, refer to page. X.. T 0. 0.

13 Compact Cylinder: Standard Type Double cting, Single Rod Series Foot style: /CDQS X Z H Y x ød X Y + Stroke T + Stroke Y X Special cap bolt G S + Stroke Foot Style Standard stroke range to to to 0 to Standard stroke ong ong stroke stroke Without auto switch range Without/ D G S H T S.. X to 0 3 to 0 to 0 to 0 Y Z X Y... Foot bracket material: Carbon steel S 2 2 Rod side flange style: F/CDQSF Head side flange style: G/CDQSG + Stroke + Stroke Rod end nut Double clevis style: D/CDQSD + Stroke C+Stroke + Stroke Rod end nut Rod end nut Cap bolt øcd hole H Rod d + Stroke + Stroke 2 x øfd to to to 0 to 0 C 2 Rod Side Flange Style Double Cevis Style Standard stroke range 0... CD to to to 0 to 0.. CT FD.... C to to to 0 to 0 FD CU FT.. FT..... CW FV FV 3 2 Head Side Flange Style Standard stroke range Standard stroke range CX. FX 2.. FX 2 C CZ FZ FZ RR to 0 3 to 0 to 0 to 0 Standard stroke ong ong stroke stroke Without auto switch range Without/ to to to to Flange bracket material: Carbon steel Standard stroke ong ong stroke stroke Without auto switch range Without/ Flange bracket material: Carbon steel 3 to 0 3 to 0 to 0 to 0 Double clevis bracket material: Carbon steel For details about the rod end nut and accessory brackets, refer to page C Standard stroke ong ong stroke stroke Without auto switch range Without/ CUJ CU CQ2 RQ CQM MU D- Individual Technical data

14 Compact Cylinder: Standard Type Double cting, Double Rod Series W ø, ø, ø, ø How to Order W D C CDQSW D C MW (uilt-in magnet) F Mounting style Through-hole/oth ends tapped common (Standard) Foot style Flange style Mounting brackets are shipped together, (but not assembled). Cylinder mounting bolts are not included. Order them separately referring to Mounting olt for W on page. mm mm mm mm Cylinder stroke Standard Stroke Standard stroke,,,,,,,,,,,,, 3, 0,, 0 For Manufacture of Intermediate Strokes, refer to page. ody option Nil C M Standard With rubber bumper Combination of body options is available. ction D Double acting Made to Order Refer to page for details. Number of auto switches Nil S n 2 pcs. pc. n pcs. uto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) CDQSW-D pplicable uto Switch/Refer to pages 3 to 3 for further information on auto switches. Type Special function Electrical entry 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) Diagnostic indication (2-color indication) Grommet Yes 3-wire (PNP) 2-wire 3-wire (NPN) Water resistant (2-color indication) 3-wire (PNP) 2-wire 3-wire Grommet Yes (NPN equivalent) No 2-wire ead wire length symbols: 0. m Nil (Example) MNW m M (Example) MNWM 3 m (Example) MNW m Z (Example) MNWZ Solid state switch Reed switch Indicator light Wiring oad voltage (Output) DC C 2 V 2 V V, V V V, V V V, V V V V 0 V 0 V or less uto switch model Perpendicular MNV MPV MV MNWV MPWV MWV MNV MPV MV V 3V 0V In-line MN MP M MNW MPW MW MN MP M 3 0 ead wire length (m) 0. (Nil) (M) 3 () (Z) Pre-wired connector Solid state auto switches marked with are produced upon receipt of order. pplicable load Since there are other applicable auto switches than listed, refer to page for details. For details about auto switches with pre-wired connector, refer to pages 32 and 32. uto switches are shipped together (not assembled). Note) There is the case V/M V/M WV/M V type auto switches cannot be mounted on the port surface, depending on the cylinder s stroke and the fitting size for piping. Consult with for details. Relay, PC Relay, PC 0

15 Compact Cylinder: Standard Type Double cting, Double Rod Series W ody Option Description Rubber bumper JIS Symbol Made to Order Specifications (For details, refer to pages 33 to.) Symbol Specifications X Change of rod end shape X Heat-resistant cylinder ( to 0 C) (without an auto switch) X Cold-resistant cylinder (0 to 0 C) (without an auto switch) X ow speed cylinder ( to 0 mm/s) X Intermediate stroke (Using exclusive body) X3 ow speed cylinder ( to 0 mm/s) XC Piston rod, retaining ring, rod end nut made of stainless steel XC3 With boss in rod side X23 Change of piston rod end of double rod cylinder X2 Fluororubber seals X33 Intermediate stroke of double rod cylinder pplication vailable for all standard models of double acting, double rod. Mounting racket Part No. Foot () Flange F0 -F0 -F0 -F0 Note ) When ordering foot bracket, order 2 pieces per cylinder. Note 2) Parts belonging to each bracket are as follows. Foot or Flange style: ody mounting bolt Specifications ction Fluid ubrication Proof pressure Maximum operating pressure Double acting, Double rod ir Not required (Non-lube). MPa.0 MPa Minimum operating pressure 0.0 MPa 0.0 MPa mbient and fluid temperature Cushion Rod end thread Without auto switch: to 0 C (No freezing) : to 0 C (No freezing) None, Rubber bumper Female thread +.0 mm Stroke length tolerance 0 Mounting Piston speed Through-hole/oth ends tapped common 0 to 00 mm/s llowable kinetic energy (J) Standard type With rubber bumper Stroke length tolerance does not include the deflection of the bumper. Theoretical Output IN OUT IN OUT IN OUT IN OUT Manufacture of Intermediate Stroke Description Part no. Description Example Rod size Operating direction Piston area (mm 2 ). Spacer is installed in the standard stroke body. Suffix -X33 to the end of standard model no. (page 0). Intermediate strokes by the mm interval are available by using spacers with standard stroke cylinders. Exclusive body (-X) Suffix -X to the end of standard model no. (page 0). Dealing with the stroke by the mm interval by using an exclusive body with the specified stroke.,, to 2 to,, to 2 to Part no.: W-D-X33 W-0D with 3 mm width spacer inside. Part no.: W-D-X Makes stroke tube. dimension is mm. dimension is mm. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket/part no Refer to pages to for cylinders with auto switches (N) Operating pressure (MPa) CUJ CU CQ2 RQ CQM MU D- Individual Technical data

16 Series W Mass/Without uto Switch Cylinder stroke 2 2 Mass/With uto Switch (uilt-in magnet) Cylinder stroke (g) 0 23 (g) Caution Retaining Ring Installation/Removal. For installation and removal, use an appropriate pair of pliers (tool for installing a type C retaining ring). 2. Even if a proper plier (tool for installing type C retaining ring) is used, it is likely to inflict damage to a human body or peripheral equipment, as a retaining ring may be flown out of the tip of a plier (tool for installing a type C retaining ring). e much careful with the popping of a retaining ring. esides, be certain that a retaining ring is placed firmly into the groove of rod cover before supplying air at the time of installment. Warning Mounting dditional Mass Male thread Nut With rubber bumper Foot style (Including mounting bolt) Rod side flange style (Including mounting bolt) (g) Do not apply the reverse torque to the piston rods sticking out from both sides of this cylinder at the same time. The torque makes connection threads inside loosen, which may cause an accident or malfunction. Install or remove a load while the piston rod width across flats are secured. Do not fix the other side of piston rod width across flat and apply the reverse torque. Calculation: (Example) WF-DM Cylinder mass: W-D g Option mass: g : Rod side flange style g g 2

17 Compact Cylinder: Standard Type Double cting, Double Rod Series W Construction asic style With rubber bumper (uilt-in magnet) ø, ø ø, ø CUJ CU CQ2 Component Parts No. Description Cylinder tube 2 Collar 3 Piston Piston rod Piston rod Retaining ring Rod end nut umper Spacer for switch Magnet Rod seal Piston seal 3 Tube gasket Material luminum alloy luminum alloy luminum alloy Stainless steel Stainless steel Carbon tool steel Carbon steel Urethane luminum alloy NR NR NR Note Hard anodized nodized Chromated Phosphate coated Nickel plated Chromated RQ CQM MU Replacement Parts/Seal Kit Kit no. W-PS W-PS W-PS W-PS Contents Set of nos. above Seal kit includes. Order the seal kit, based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g) 3 D- Individual Technical data

18 Series W Mounting olt for W Mounting method: Mounting bolt for through-hole mounting style of W is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x pcs. Mounting bolt Note) When mounting a cylinder with throughhole, be sure to use the attached plain washer. Cylinder model W-D -D C D 3 Mounting bolt size M3 x x 3 Cylinder model W-D -D C D 0 Mounting bolt size M x x 0 -D 0 x 0-3D x. -D x -0D 0 x 0 -D -D W-D -D 0 3 x 0 x M3 x x 3 -D -0D W-D -D x x 0 M x 3 x 0 -D 0 x 0 -D x. -D x -D 0 x 0 -D 0 x 0 -D x -D x -D 0 x 0 W-D 3 M x 3-3D x -D 0 x 0-0D 0 x 0 -D x -D x -D 0 x 0-0D 0 x 0 Material: Chromium molybdenum steel Mounting olt for CDQSW with uto Switch Mounting method: Mounting bolt for through-hole mounting style of CDQSW is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x 3 pcs. Mounting bolt Note) When mounting a cylinder with throughhole, be sure to use the attached plain washer. Cylinder model CDQSW-D -D C D 3 0 Mounting bolt size M3 x 3 x 0 Cylinder model CDQSW-D -D C D 0 Mounting bolt size M x x 0 -D x -3D x. -D 0 x 0-0D 0 x 0 -D -D CDQSW-D -D x x 0 M3 x 3 x 0 -D -0D CDQSW-D -D 0 0 x x 0 M x x 0 -D x -D x. -D 0 x 0 -D 0 x 0 -D x -D x -D 0 x 0 -D 0 x 0 CDQSW-D M x -3D x -D 0 x 0-0D 0 x 0 -D x -D x -D 0 x 0-0D 0 x 0 Material: Chromium molybdenum steel

19 Compact Cylinder: Standard Type Double cting, Double Rod Series W Dimensions: ø to ø asic style (Through-hole/oth ends tapped common): W/CDQSW 2 x x øo counterbore R H thread effective depth C 2 x x O effective depth R Note) 2 x M x 0. uto switch Minimum lead wire bending radius Width across flats K x øn through Flat washer pcs. + Stroke + 2 (Stroke) + Stroke CUJ, CU Width across flats MM Width across flats MM CQ2 RQ H C X H C X + Stroke CQM MU + 2 (Stroke) Rod End Male Thread Without auto switch C H... MM M x 0. M x.0 M x. M x. X.. asic Style to to to 0 to 0 Without auto switch Note ) For basic style ø and ø with stroke, through-hole is threaded over the entire length. Note 2) Rubber bumper type has the same dimensions as those indicated above Note 3) The positions of width across flats on both sides are not the same. For details about the rod end nut and accessory brackets, refer to page. C D E H M3 x 0. M x 0. M x 0. M x.0 I K M.. 2 N O M x 0. M x 0. M x.0 M x.0 O.. Q.. R R T D- Individual Technical data

20 Series W Dimensions: ø to ø Foot style: W/CDQSW Special cap bolt + Stroke + Stroke Y H X Z x ød X Y T Y X S + Stroke + 2 (Stroke) G + 2 (Stroke) + Stroke Foot Style to to to 0 to 0 Without auto switch S Flange style: WF/CDQSWF S D.... G H 2 2 T X Y Z 2 X.2. Y... Foot bracket material: Carbon steel 2 x øfd + Stroke + Stroke + 2 (Stroke) Rod end nut + 2 (Stroke) 3 + Stroke Flange Style to to to 0 to 0 Without auto switch For details about the rod end nut and accessory brackets, refer to page. Note ) The positions of width across flats on both sides are not the same FD.... FT.. FV 3 2 FX 2 FZ Flange bracket material: Carbon steel

21 Compact Cylinder: Standard Type Single cting, Single Rod Series ø, ø, ø, ø How to Order S CDQS S MW F G D (uilt-in magnet) Mounting style Through-hole/oth ends tapped common (Standard) Foot style Rod side flange style Head side flange style Double clevis style Mounting brackets are shipped together, (but not assembled). Cylinder mounting bolts are not included. Order them separately referring to Mounting olt for on page. mm mm mm mm Cylinder stroke Standard Stroke Standard stroke,,,, For Manufacture of Intermediate Strokes, refer to page. ody option Nil M F ction S Single acting, Spring return T Single acting, Spring extend pplicable uto Switch/Refer to pages 3 to 3 for further information on auto switches. Type Special function Electrical entry 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) Diagnostic indication (2-color indication) Grommet Yes 3-wire (PNP) 2-wire 3-wire (NPN) Water resistant (2-color indication) 3-wire (PNP) 2-wire 3-wire Grommet Yes (NPN equivalent) No 2-wire ead wire length symbols: 0. m Nil (Example) MNW m M (Example) MNWM 3 m (Example) MNW m Z (Example) MNWZ Solid state switch Reed switch Indicator light Wiring oad voltage (Output) DC C 2 V 2 V V, V V V, V V V, V V V V 0 V 0 V or less MNV MPV MV MNWV MPWV MWV MNV MPV MV V 3V 0V Standard (Rod end female thread) oss on head side uto switch model Perpendicular MN MP M MNW MPW MW MN MP M 3 0 Made to Order Refer to page for details. Number of auto switches Nil S n 2 pcs. pc. n pcs. uto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. In-line uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) CDQS-T ead wire length (m) 0. (Nil) (M) 3 () (Z) Pre-wired connector Solid state auto switches marked with are produced upon receipt of order. pplicable load Since there are other applicable auto switches than listed, refer to page for details. For details about auto switches with pre-wired connector, refer to pages 32 and 32. uto switches are shipped together (not assembled). Note) There is the case V/M V/M WV/M V type auto switches cannot be mounted on the port surface, depending on the cylinder s stroke and the fitting size for piping. Consult with for details. Relay, PC Relay, PC CUJ CU CQ2 RQ CQM MU D- Individual Technical data

22 Series Standard Specifications ction Single acting, Single rod Fluid ir ubrication Not required (Non-lube) Proof pressure. MPa Maximum operating pressure.0 MPa Minimum operating pressure 0. MPa 0. MPa mbient and fluid temperature Without auto switch: to 0 C (No freezing) : to 0 C (No freezing) Cushion None Rod end thread Female thread JIS Symbol Single acting, Spring return Single acting, Spring extend Stroke length tolerance Mounting Piston speed llowable kinetic energy (J) +.0 mm 0 Through-hole/oth ends tapped common 0 to 00 mm/s Made to Order Specifications (For details, refer to pages 33 to and 0.) Symbol Specifications X Change of rod end shape X Intermediate stroke (Using exclusive body), Extension type only XC Piston rod, retaining ring, rod end nut made of stainless steel XC3 With boss on rod side, ø and ø only X2 Fluororubber seals X With concave shape end boss on the cylinder tube head side ody Option Description pplication vailable for all standard models of single acting, single rod. Theoretical Output ction Spring return Spring extend Rod size Operating direction IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT Piston area (mm 2 ) Operating pressure (MPa) Retracted side (N) Extended side Mounting racket Part No. Foot () Flange Double clevis F0 -F0 -F0 -F0 -D0 -D0 -D0 -D0 Note ) When ordering foot bracket, order 2 pieces per cylinder. Note 2)Parts belonging to each bracket are as follows. Foot or Flange style: ody mounting bolt Double clevis style: Clevis pin, Type C retaining ring for axis, ody mounting bolt. Manufacture of Intermediate Stroke (Single acting, Spring retract type is excluded.) Description Part no. Description Example Spacer is installed in the standard stroke body. Refer to How to Order for the standard model no. (page ). Intermediate strokes by the mm interval are available by using spacers with standard stroke cylinders. to Part no.: -3T -T with 2 mm width spacer inside. dimension is 2. mm. to Refer to pages to for cylinders with auto switches. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket/part no.

23 Compact Cylinder: Standard Type Single cting, Single Rod Series Mass/Without uto Switch Spring return (Spring extend) Mass/With uto Switch (uilt-in magnet) Spring return (Spring extend) (g) (g) Cylinder stroke Cylinder stroke 2 (3) 3 (3) 3 () 2 () 3 (3) () () (3) 3 (3) () () (0) () () () () ( ): Denotes the values of spring extend. ( ): Denotes the values of spring extend. dditional Mass (g) Male thread. 3 Nut 2 Foot style (Including mounting bolt) Rod side flange style (Including mounting bolt) Head side flange style (Including mounting bolt) 3 Double clevis style (Including pin, retaining ring, bolt) Calculation: (Example) G-S Cylinder mass: -S g Option mass: Head side flange style g g Mounting olt for without uto Switch Mounting method: Mounting bolt for through-hole mounting style of is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x pcs. Single acting, Spring return Note) When mounting a cylinder with through-hole, be sure to use the attached plain washer. Mounting olt for CDQS with uto Switch Mounting method: Mounting bolt for through-hole mounting style of CDQS is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x pcs. Single acting, Spring return Mounting bolt Mounting bolt Single acting, Spring extend Single acting, Spring extend Note) When mounting a cylinder with through-hole, be sure to use the attached plain washer. Mounting bolt Mounting bolt Caution Retaining Ring Installation/Removal. For installation and removal, use an appropriate pair of pliers (tool for installing a type C retaining ring). 2. Even if a proper plier (tool for installing type C retaining ring) is used, it is likely to inflict damage to a human body or peripheral equipment, as a retaining ring may be flown out of the tip of a plier (tool for installing a type C retaining ring). e much careful with the popping of a retaining ring. esides, be certain that a retaining ring is placed firmly into the groove of rod cover before supplying air at the time of installment. Single cting, Spring Return Cylinder model C D Mounting bolt size -S M3 x. -S x -S M3 x. -S x -S M x. -S x -S M x. -S 3 x 3 Single cting, Spring Extend Cylinder model -T -T -T -T -T -T -T -T C.... D 3 Material: Chromium molybdenum steel Mounting bolt size M3 x x M3 x x M x x M x x 3 Single cting, Spring Return Cylinder model C D Mounting bolt size CDQS-S M3 x. -S 3 x 3 CDQS-S M3 x. -S 3 x 3 CDQS-S 3 M x 3. -S 0 x 0 CDQS-S 0 M x 0. -S Single cting, Spring Extend Cylinder model C D Mounting bolt size CDQS-T M3 x. -T 3 x 3 CDQS-T M3 x. -T 3 x 3 CDQS-T 3 M x 3. -T 0 x 0 CDQS-T 0 M x 0. -T x Material: Chromium molybdenum steel CUJ CU CQ2 RQ CQM MU D- Individual Technical data

24 Series Construction Single acting, Spring return Single acting, Spring extend Single acting, Spring return/ (uilt-in magnet) ø, Single acting, Spring extend/ (uilt-in magnet) ø, ø, ø, Component Parts No. Description Cylinder tube 2 Collar 3 Piston Piston rod Retaining ring Retaining ring Rod end nut Spacer for switch type Return spring Plug with fixed orifice Magnet Rod seal 3 Piston seal Tube gasket Material luminum alloy luminum alloy luminum alloy Stainless steel Stainless steel Carbon tool steel Carbon tool steel Carbon steel luminum alloy Piano wire lloy steel NR NR NR Note Hard anodized nodized Single acting, Spring return Single acting, Spring extend Phosphate coated Nickel plated Nickel plated Chromated Zinc chromated Nickel plated Single acting, Spring return Single acting, Spring extend Replacement Parts/Seal Kit Single acting, Spring return Kit no. Contents -S-PS -S-PS -S-PS Set of nos. above -S-PS Seal kit includes. Order the seal kit, based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g) 0 Replacement Parts/Seal Kit Single acting, Spring extend Kit no. Contents -T-PS -T-PS -T-PS -T-PS Set of nos. above Seal kit includes. Order the seal kit, based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g)

25 Compact Cylinder: Standard Type Single cting, Single Rod Series Dimensions: ø to ø/single cting, Spring Return asic style (Through-hole/oth ends tapped common): /CDQS ø ø 2 x x øo counterbore R H thread effective depth C 2 x x O effective depth R Note) uto switch Minimum lead wire bending radius M x 0. x øn through Flat washer pcs. ø, ø Width across flats MM H C X CUJ CU CQ2 RQ CQM MU Rod End Male Thread 3 C H... MM M x 0. M x.0 M x. M x. X.. asic Style, Without auto switch ST ST ST ST ST ST ST ST C D E F.. H M3 x 0. M x 0. M x 0. M x.0 Note) For basic style ø and ø with stroke, through-hole is threaded over the entire length. For basic style ø, ø with and stroke, through-hole is threaded over the entire length. (uilt-in magnet)/ø; stroke. For details about the rod end nut and accessory brackets, refer to page. I K M.. 2 N O M x 0. M x 0. M x.0 M x.0 O R.. R T D- Individual Technical data

26 Series Dimensions: ø to ø/single cting, Spring Return Foot style: /CDQS X Z H Y x ød Special cap bolt + Stroke X Y T + Stroke Y X G S + Stroke Foot Style, Without auto switch S S D.... G H 2 2 T X Y Z 2 Foot bracket material: Carbon steel X.2. Y... Rod side flange style: F/CDQSF 2 x øfd + Stroke + Stroke Rod Side Flange Style, Without auto switch FD.... FT.. FV 3 2 FX 2 FZ 0 Flange bracket material: Carbon steel Rod end nut Head side flange style: G/CDQSG + Stroke + Stroke 2 x øfd Head Side Flange Style, Without auto switch FD.... FT.. FV 3 2 FX 2 FZ 0 Flange bracket material: Carbon steel Rod end nut Double clevis style: D/CDQSD + Stroke C + Stroke + Stroke Cap bolt øcd hole H Rod d Double Clevis Style, Without auto switch C C C CD CT CU CW CX CZ Double clevis bracket material: Carbon steel For details about the rod end nut and accessory brackets, refer to page RR Rod end nut 2

27 Compact Cylinder: Standard Type Single cting, Single Rod Series Dimensions: ø to ø/single cting, Spring Extend asic style (Through-hole/oth ends tapped common): /CDQS ø ø 2 x x øo counterbore R H thread effective depth C 2 x x O effective depth R Note) M x 0. uto switch Minimum lead wire bending radius x øn through Flat washer pcs. ø, ø Width across flats MM CUJ CU CQ2 H C X RQ CQM MU Rod End Male Thread C H 3 ST ST MM M x 0. M x.0 M x. M x. X.. asic Style, Without auto switch ST ST ST ST ST ST... ST ST C D E H M3 x 0. M x 0. M x 0. M x.0 Note) For basic style ø and ø with stroke, through-hole is threaded over the entire length. For basic style ø, ø with and stroke, through-hole is threaded over the entire length. (uilt-in magnet)/ø; stroke. For details about the rod end nut and accessory brackets, refer to page. I K ST... ST M.. 2 N O M x 0. M x 0. M x.0 M x.0 O.. Q.. R R T D- Individual Technical data

28 Series Dimensions: ø to ø/single cting, Spring Extend Foot style: /CDQS X Z H Y x ød + Stroke X Y S + Stroke + Stroke T + 2 (Stroke) Special cap bolt Y X G Foot Style , Without auto switch S.. D.... G H S.. T X Y Z 2 X.2. Y... Foot bracket material: Carbon steel + Stroke Rod side flange style: F/CDQSF 2 x øfd + Stroke + Stroke + 2 (Stroke) Rod Side Flange Style, Without auto switch FD.... FT.. FV 3 2 FX 2 FZ Flange bracket material: Carbon steel Rod end nut + Stroke Head side flange style: G/CDQSG + Stroke + Stroke + 2 (Stroke) 2 x øfd Head Side Flange Style, Without auto switch FD.... FT.. FV 3 2 FX 2 FZ Flange bracket material: Carbon steel + Stroke Rod end nut Double clevis style: D/CDQSD + Stroke + Stroke C + 2 (Stroke) + 2 (Stroke) + Stroke Cap bolt øcd hole H Rod d Double Clevis Style, C 2 CD Without auto switch C CT CU C CW CX. CZ RR. Double clevis bracket material: Carbon steel For details about the rod end nut and accessory brackets, refer to page.

29 Compact Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K ø, ø, ø, ø How to Order K D CDQSK D MW (uilt-in magnet) Made to Order Refer to page for details. F G D Mounting style Through-hole/oth ends tapped common (Standard) Foot style Rod side flange style Head side flange style Double clevis style Mounting brackets are shipped together, (but not assembled). Cylinder mounting bolts are not included. Order them separately referring to Mounting olt for K on page. Standard Stroke,, mm mm mm mm Cylinder stroke Standard stroke,,,,,,,,,,, 3, 0,, 0 For Manufacture of Intermediate Strokes, refer to page. ody option ction D Double acting pplicable uto Switch/Refer to pages 3 to 3 for further information on auto switches. Type Solid state switch Reed switch Special function Diagnostic indication (2-color indication) Water resistant (2-color indication) Electrical entry Indicator light Wiring oad voltage (Output) DC C 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN equivalent) 2-wire Grommet Yes No ead wire length symbols: 0. m Nil (Example) MNW m M (Example) MNWM 3 m (Example) MNW m Z (Example) MNWZ V, V V Grommet Yes 2 V V, V V V, V V 2 V V V 0 V 0 V or less Nil M F MNV MPV MV MNWV MPWV MWV MNV MPV MV V 3V 0V MN MP M MNW MPW MW MN MP M 3 0 Number of auto switches Nil S n 2 pcs. pc. n pcs. uto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Standard (Rod end female thread) oss on head side uto switch model Perpendicular In-line uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) CDQSK-D ead wire length (m) 0. (Nil) (M) 3 () (Z) Pre-wired connector Solid state auto switches marked with are produced upon receipt of order. pplicable load Since there are other applicable auto switches than listed, refer to page for details. For details about auto switches with pre-wired connector, refer to pages 32 and 32. uto switches are shipped together (not assembled). Note) There is the case V/M V/M WV/M V type auto switches cannot be mounted on the port surface, depending on the cylinder s stroke and the fitting size for piping. Consult with for details. Individual Technical data Relay, PC Relay, PC CUJ CU CQ2 RQ CQM MU D-

30 Series K JIS Symbol Made to Order Specifications (For details, refer to pages 2 and to.) Standard Specifications ction Fluid ubrication Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Rod end thread Stroke length tolerance Mounting Piston speed llowable kinetic energy (J) Rod non-rotating accuracy Double acting, Single rod ir Not required (Non-lube). MPa.0 MPa 0.0 MPa 0.0 MPa Without auto switch: to 0 C (No freezing) : to 0 C (No freezing) None Female thread +.0 mm 0 Through-hole/oth ends tapped common 0 to 00 mm/s ± ±0. Symbol Specifications XC Piston rod and rod end nut made of stainless steel XC djustable stroke cylinder/djustable extension type XC djustable stroke cylinder/djustable retraction type XC Dual stroke cylinder/double rod type XC Dual stroke cylinder/single rod type X With concave shape end boss on the cylinder tube head side ody Option Description pplication vailable for all non-rotating rod type. Mounting racket Part No. Foot () Flange Double clevis K-0 K-0 K-0 K-0 K-F0 K-F0 K-F0 K-F0 K-D0 K-D0 K-D0 K-D0 Note ) When ordering foot bracket, order 2 pieces per cylinder. Note 2) Parts belonging to each bracket are as follows. Foot or Flange style: ody mounting bolt Double clevis style: Clevis pin, Type C retaining ring for axis, ody mounting bolt. Theoretical Output Rod width across flats ction IN OUT IN OUT IN OUT IN OUT Manufacture of Intermediate Stroke Part no. Standard stroke Example Description Description Piston area (mm 2 ) OUT IN (N) Operating pressure (MPa) Spacer is installed in the standard stroke body. Refer to How to Order for the standard model no. (page ). Intermediate strokes by the mm interval are available by using spacers with standard stroke cylinders., to 2, to Part no.: KD K-0D with 3 mm width spacer inside. dimension is. mm. Refer to pages to for cylinders with auto switches. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no.

31 Compact Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Mass/Without uto Switch 3 3 Cylinder stroke (g) 0 Calculation: (Example) KF-DM Cylinder mass: K-D g Option mass: g : Rod side flange style 2 g 2 g Mass/With uto Switch (uilt-in magnet) (g) Cylinder stroke dditional Mass (g) Male thread Nut. 3 2 Foot style (Including mounting bolt) Rod side flange style (Including mounting bolt) 2 Head side flange style (Including mounting bolt) 3 Double clevis style (Including pin, retaining ring, bolt) CUJ CU CQ2 RQ CQM MU D- Individual Technical data

32 Series K Construction asic style ø (uilt-in magnet) ø ø, ø, ø ø ø, ø Component Parts No. Description Material Note Cylinder tube Rod cover Piston Piston rod Spacer for switch type Magnet Non-rotating guide Hexagon socket head cap screw Plain washer Rod end nut Rod seal Piston seal Tube gasket luminum alloy luminum alloy luminum alloy Stainless steel luminum alloy Oil impregnated sintered alloy lloy steel Rolled steel Carbon steel NR NR NR Hard anodized nodized Chromated Chromated ø, ø and ø Nickel plated Nickel plated Nickel plated Replacement Parts/Seal Kit Kit no. Contents K-PS K-PS K-PS Set of nos. above K-PS Seal kit includes,,. Order the seal kit, based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g) Operating Precautions Caution. ny kind of operation producing rotational torque to piston rod must be considered. The non-rotating guide would be deformed and the accuracy would be compromised. Refer to the table below for rotation torque allowance. llowable rotational torque (N m) or less Precautions ø 0.0 ø 0.0 ø 0.2 ø oad to piston rod must always be in an axial direction. 3. When a workpiece is secured to the end of the piston rod, ensure that the piston rod is retracted entirely, and place a wrench on the portion of the rod that protrudes beyond the section. lso, tighten by giving consideration to prevent the tightening torque from being applied to the non-rotating guide.

33 Compact Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Mounting olt for K Mounting method: Mounting bolt for through-hole mounting style of K is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x 2 pcs. Head side mounting style Rod side mounting style Mounting bolt Mounting bolt Note) When mounting a cylinder with through-hole, be sure to use the attached plain washer. Mounting olt for CDQSK Mounting method: Mounting bolt for through-hole mounting style of CDQSK is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x 3 2 pcs. Head side mounting style Rod side mounting style Mounting bolt Mounting bolt Note) When mounting a cylinder with through-hole, be sure to use the attached plain washer. Cylinder model K-D -D C D Mounting bolt size M3 x x C' D' 3 Mounting bolt size M3 x x 3 -D 3 x 3 0 x 0.. -D 0 x 0 x -D -D K-D -D 0 x x 0 M3 x x 0 3 x 0 x M3 x x 3 -D 3 x 3 0 x 0.. -D 0 x 0 x -D -D K-D -D -D -D -D -D -3D -0D -D -0D K-D -D -D -D x x 0 M x x x 3 x 0 x x 0 x x 0 x x 0 M x x 3 x 0 x x 0 x M x x 3 x 0 x x 0 x x 0 x x 0 x M x 3 x 0 x x 0 -D 0 x 0 x.. -D x 0 x 0-3D -0D -D -0D 0 0 x 0 x x 0 x 0 0 x x 0 x x 0 Material: Chromium molybdenum steel Cylinder model CDQSK-D -D C D 3 Mounting bolt size M3 x x 3 C' D' 3 0 Mounting bolt size M3 x 3 x 0 -D 0 x 0 x.. -D x 0 x 0 -D -D CDQSK-D -D 0 3 x 0 x M3 x x x x 0 M3 x 3 x 0 -D 0 x 0 x.. -D x 0 x 0 -D -D CDQSK-D -D -D -D -D -D -3D -0D -D -0D CDQSK-D -D -D -D x 0 x M x 3 x 0 x x 0 x x 0 x x 0 x x 0 M x 0 x x 0 x x x 0 M x 0 x x 0 x x 0 x x 0 x x 0 x M x x 0 x x 0 -D 0 x 0 x.. -D x 0 x 0-3D -0D -D -0D 0 0 x 0 x x 0 x 0 0 x x 0 x x 0 Material: Chromium molybdenum steel CUJ CU CQ2 RQ CQM MU D- Individual Technical data

34 Series K Dimensions: ø to ø asic style (Through-hole/oth ends tapped common): K/CDQSK For the auto switch mounting position and its mounting height, refer to page. ø ø 2 x 2 x øo counterbore 2 x 2 x O effective depth R Note) H thread effective depth C 2 x M x 0. uto switch Minimum lead wire bending radius Flat washer 2 pcs. Width across flats 2 x øn through + Stroke + Stroke ø, ø Width across flats MM H C X Rod End Male Thread 3 C H... MM M x 0. M x.0 M x. M x. X.. asic Style to to to 0 to 0 Without auto switch C E F.. H M3 x 0. M x 0. M x 0. M x.0 I K Note) For basic style ø and ø with stroke, through-hole is threaded over the entire length. For basic style ø with to stroke, through-hole is threaded over the entire length. For basic style ø with and stroke, through-hole is threaded over the entire length. Note) (uilt-in magnet): ø; stroke For details about the rod end nut and accessory brackets, refer to page M.. 2 N O M x 0. M x 0. M x.0 M x.0 O.. Q.. R R T

35 Compact Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Foot style: K/CDQSK X Z H Y x ød Special cap bolt + Stroke X Y Y X S + Stroke T + Stroke G Foot Style to to to 0 to 0 Without auto switch S S D.... G H 2 T X 3 3 Y Z Foot bracket material: Carbon steel X.2 Y.. Rod side flange style: KF/CDQSKF 2 x øfd + Stroke + Stroke Rod Side Flange Style to to to 0 to 0 Without auto switch FD... FT.. FV 3 FX FZ Flange bracket material: Carbon steel Rod end nut CUJ CU Head side flange style: KG/CDQSKG + Stroke + Stroke 2 x øfd Head Side Flange Style to to to 0 to 0 Without auto switch FD... FT.. FV 3 FX FZ Flange bracket material: Carbon steel CQ2 RQ CQM MU Rod end nut Double clevis style: KD/CDQSKD + Stroke C + Stroke + Stroke Cap bolt øcd hole H Rod d Double Clevis Style to to to 0 to 0 Without auto switch C C.. 2. C 2 CD CT CU CW CX CZ.. Double clevis bracket material: Carbon steel RR D- Rod end nut For details about the rod end nut and accessory brackets, refer to page. Individual Technical data

36 Compact Cylinder: Non-rotating Rod Type Double cting, Double Rod Series KW ø, ø, ø, ø How to Order KW D CDQSKW D MW (uilt-in magnet) F Mounting style Through-hole/oth ends tapped common (Standard) Foot style Flange style Mounting brackets are shipped together, (but not assembled). Cylinder mounting bolts are not included. Order them separately referring to Mounting olt for KW on page. mm mm mm mm ody option Nil M Made to Order Refer to page 3 for details. Number of auto switches Nil S n 2 pcs. pc. n pcs. uto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Standard (Rod end female thread) Standard Stroke,, Cylinder stroke Standard stroke,,,,,,,,,,, 3, 0,, 0 ction D Double acting uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) CDQSKW-D pplicable uto Switch/Refer to pages 3 to 3 for further information on auto switches. Type Special function Electrical entry 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) Diagnostic indication (2-color indication) Grommet Yes 3-wire (PNP) 2-wire 3-wire (NPN) Water resistant (2-color indication) 3-wire (PNP) 2-wire 3-wire Grommet Yes (NPN equivalent) No 2-wire ead wire length symbols: 0. m Nil (Example) MNW m M (Example) MNWM 3 m (Example) MNW m Z (Example) MNWZ Solid state switch Reed switch Wiring oad voltage (Output) DC C 2 V 2 V V, V V V, V V V, V V V V 0 V 0 V or less uto switch model Perpendicular MNV MPV MV MNWV MPWV MWV MNV MPV MV V 3V 0V In-line MN MP M MNW MPW MW MN MP M 3 0 ead wire length (m) 0. (Nil) (M) 3 () (Z) Pre-wired connector pplicable load Since there are other applicable auto switches than listed, refer to page for details. For details about auto switches with pre-wired connector, refer to pages 32 and 32. uto switches are shipped together (not assembled). Note) There is the case V/M V/M WV/M V type auto switches cannot be mounted on the port surface, depending on the cylinder s stroke and the fitting size for piping. Consult with for details. 2 Indicator light Solid state auto switches marked with are produced upon receipt of order. Relay, PC Relay, PC

37 Compact Cylinder: Non-rotating Rod Type Double cting, Double Rod Series KW JIS Symbol Specifications ction Fluid ubrication Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Rod end thread Stroke length tolerance Mounting Piston speed llowable kinetic energy (J) Rod non-rotating accuracy Double acting, Single rod ir Not required (Non-lube). MPa.0 MPa 0.0 MPa 0.0 MPa Without auto switch: to 0 C (No freezing) : to 0 C (No freezing) None Female thread +.0 mm 0 Through-hole/oth ends tapped common 0 to 00 mm/s ± ±0. Symbol XC X33 Made to Order Specifications (For details, refer to pages 2 to.) Specifications Piston rod, retaining ring, rod end nut made of stainless steel Intermediate stroke of double rod cylinder ody Option Description pplication vailable for all non-rotating rod type. Mounting racket Part No. Foot () K-0 K-0 K-0 K-0 Flange K-F0 K-F0 K-F0 K-F0 Note ) When ordering foot bracket, order 2 pieces per cylinder. Note 2) Parts belonging to each bracket are as follows. Foot or Flange style: ody mounting bolt Theoretical Output Rod width across flats Piston area (mm 2 ) Refer to pages to for cylinders with auto switches. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket/part no. (N) Operating pressure (MPa) CUJ CU CQ2 RQ CQM MU 3 D- Individual Technical data

38 Series KW Mass/Without uto Switch Cylinder stroke 0 2 Mass/With uto Switch (uilt-in magnet) (g) (g) 0 Precautions Operating Precautions Warning. Do not apply the reverse torque to the piston rods sticking out from both sides of this cylinder at the same time. The torque makes connection threads inside loosen, which may cause an accident or malfunction. Install or remove a load while the piston rod width across flats are secured. Do not fix the other side of piston rod width across flat and apply the reverse torque dditional Mass (g) Male thread Nut Foot style (Including mounting bolt) Rod side flange style (Including mounting bolt) Calculation: (Example) KWF-DM Cylinder mass: KW-D g Option mass: g : Rod side flange style 2 g 2 g Caution. ny kind of operation producing rotational torque to piston rod must be considered. The non-rotating guide would be deformed and the accuracy would be compromised. Refer to the table below for rotation torque allowance. llowable rotational torque (N m) or less ø 0.0 ø 0.0 ø 0.2 ø oad to piston rod must always be in an axial direction. Retaining Ring Installation/Removal Caution. For installation and removal, use an appropriate pair of pliers (tool for installing a type C retaining ring). 2. Even if a proper plier (tool for installing type C retaining ring) is used, it is likely to inflict damage to a human body or peripheral equipment, as a retaining ring may be flown out of the tip of a plier (tool for installing a type C retaining ring). e much careful with the popping of a retaining ring. esides, be certain that a retaining ring is placed firmly into the groove of rod cover before supplying air at the time of installment.

39 Compact Cylinder: Non-rotating Rod Type Double cting, Double Rod Series KW Construction asic style ø (uilt-in magnet) ø ø, ø, ø ø ø, ø Component Parts No Description Material Cylinder tube luminum alloy Rod cover luminum alloy Collar luminum alloy Piston luminum alloy Piston rod Stainless steel Piston rod Stainless steel Spacer for switch type luminum alloy Magnet Retaining ring Carbon tool steel Non-rotating guide Oil impregnated sintered alloy Hexagon socket head cap screw lloy steel Plain washer Rolled steel Rod end nut Carbon steel Rod seal for non-rotating NR Rod seal NR Piston seal NR Tube gasket NR Note Hard anodized nodized nodized Chromated Chromated Phosphate coated ø, ø and ø Nickel plated Nickel plated Nickel plated CUJ CU CQ2 RQ CQM MU Replacement Parts/Seal Kit Kit no. Contents KW-PS KW-PS KW-PS Set of nos. above KW-PS Seal kit includes. Order the seal kit, based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g) D- Individual Technical data

40 Series KW Mounting olt for KW Mounting method: Mounting bolt for through-hole mounting style of KW is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x 2 pcs. Round rod side mounting Non-rotating rod side mounting Mounting bolt C' D' Non-rotating rod side mounting Mounting bolt C' D' D D C C Mounting bolt Note) When mounting a cylinder with through-hole, be sure to use the attached plain washer. Mounting olt for KW Mounting method: Mounting bolt for through-hole mounting style of CDQSKW is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x 3 2 pcs. Round rod side mounting Mounting bolt Note) When mounting a cylinder with through-hole, be sure to use the attached plain washer. Cylinder model KW-D -D C D Mounting bolt size M3 x x 3 C' D' 3 Mounting bolt size M3 x 3 x 0 -D 3 x 0 0 x.. -D 0 x x 0 -D -D KW-D -D 0 x 0 x M3 x x x x 0 M3 x 3 x 0 -D 3 x 0 0 x.. -D 0 x x 0 -D -D KW-D -D -D -D -D -D -3D -0D -D -0D KW-D -D -D -D x 0 x M x 3 x 0 x x 0 x x 0 x x 0 x x 0 M x 3 x 0 x x x x 0 M x 0 x x 0 x x 0 x x 0 x x 0 x M x 0 x x 0 x -D 0 x x 0 -D x 0 0 x -3D -0D -D -0D 0 0 x x 0 x x x 0 x x 0 x Material: Chromium molybdenum steel Cylinder model CDQSKW-D -D C D 3 Mounting bolt size M3 x 3 x 0 C' D' 3 0 Mounting bolt size M3 x 0 x -D 0 x x 0.. -D x 0 0 x -D -D CDQSKW-D -D 0 3 x x 0 M3 x 3 x x 0 x M3 x 0 x -D 0 x x 0.. -D x 0 0 x -D -D CDQSKW-D -D -D -D -D -D -3D -0D -D -0D CDQSKW-D -D -D -D x x 0 M x x 0 x x 0 x x 0 x x 0 x x 0 M x x 0 x x x 0 x x 0 x x 0 x x 0 x x 0 x x 0 x M x 0 x x 0 x -D 0 x x 0 -D x 0 0 x -3D -0D -D -0D 0 0 x x 0 x x x 0 x x 0 x Material: Chromium molybdenum steel

41 Compact Cylinder: Non-rotating Rod Type Double cting, Double Rod Series KW Dimensions: ø to ø asic style (Through-hole/oth ends tapped common): KW/CDQSKW ø For the auto switch mounting position and its mounting height, refer to page. ø 2 x 2 x øo counterbore 2 x 2 x O effective depth R øi H thread effective depth C M E T Width across flats K Q uto switch Minimum lead wire bending radius F 2 x M x 0. Width across flats K2 ød M E Flat washer 2 pcs. R R + Stroke + 2 (Stroke) 2 x øn through + Stroke ø, ø Width across flats MM Width across flats MM CUJ CU CQ2 H H RQ C X + 2 (Stroke) C X + Stroke CQM MU Rod End Male Thread Without auto switch C H... MM M x 0. M x.0 M x. M x. X.. asic Style to to to 0 to 0 Without auto switch C D E F.. H M3 x 0. M x 0. M x 0. M x.0 I K Note ) For basic style ø and ø with stroke, through-hole is threaded over the entire length. Note 2) The positions of width across flats (K2) on both sides are not the same. For details about the rod end nut and accessory brackets, refer to page. K M.. 2 N O M x 0. M x 0. M x.0 M x.0 O.. Q.. R R T D- Individual Technical data

42 Series KW Dimensions: ø to ø Foot style: KW/CDQSKW + Stroke + Stroke Special cap bolt Y H X Z x ød X Y Y X S + Stroke + 2 (Stroke) T G + 2 (Stroke) + Stroke Foot Style to to to 0 to 0 Without auto switch S S D.... G H 2 2 T X 3 3 Y Z Foot bracket material: Carbon steel X.2 Y.. Flange style: KWF/CDQSKWF FV FX FZ 2 x øfd FT + Stroke + 2 (Stroke) + Stroke (Stroke) 3 + Stroke Flange Style to to to 0 to 0 Without auto switch For details about the rod end nut and accessory brackets, refer to page. Note ) The positions of piston rod width across flats (right side) are not constant FD.... FT.. FV 3 2 FX 2 FZ Flange bracket material: Carbon steel

43 Compact Cylinder: nti-lateral oad Type Series S ø, ø, ø, ø F G D (uilt-in magnet) Mounting style Through-hole/oth ends tapped common (Standard) Foot style Rod side flange style Head side flange style Double clevis style Mounting brackets are shipped together, (but not assembled). Cylinder mounting bolts are not included. Order them separately referring to Mounting olt for S on page. CDQS S Cushion nti-lateral load type S D C S D C mm mm mm mm Cylinder stroke Standard Stroke Standard stroke,,,,,,,,,,,,, 3, 0,, 0 For Manufacture of Intermediate Strokes, refer to page 0. MW ody option With rubber bumper C Rod end female thread With rubber bumper CM With rubber bumper CF oss on head side ction D Double acting pplicable uto Switch/Refer to pages 3 to 3 for further information on auto switches. Type Solid state switch Reed switch Special function Diagnostic indication (2-color indication) Water resistant (2-color indication) Electrical entry Indicator light Wiring oad voltage (Output) DC C 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN equivalent) 2-wire Grommet Yes No ead wire length symbols: 0. m Nil (Example) MNW m M (Example) MNWM 3 m (Example) MNW m Z (Example) MNWZ V, V V Grommet Yes 2 V V, V V 2 V How to Order V, V V 0 V 0 V or less uto switch model Perpendicular MNV MPV MV MNWV MPWV MWV MNV MPV MV V 3V 0V In-line MN MP M MNW MPW MW MN MP M 3 0 Made to Order Refer to page 0 for details. Number of auto switches Nil S n 2 pcs. pc. n pcs. uto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) CDQSS-D ead wire length (m) 0. (Nil) (M) 3 () (Z) Pre-wired connector Solid state auto switches marked with are produced upon receipt of order. pplicable load Since there are other applicable auto switches than listed, refer to page for details. For details about auto switches with pre-wired connector, refer to pages 32 and 32. uto switches are shipped together (not assembled). Note) There is the case V/M V/M WV/M V type auto switches cannot be mounted on the port surface, depending on the cylinder s stroke and the fitting size for piping. Consult with for details. Relay, PC Relay, PC CUJ CU CQ2 RQ CQM MU D- Individual Technical data

44 Series S Standard Specifications ction Fluid ubrication Proof pressure Maximum operating pressure Double acting, Single rod ir Not required (Non-lube). MPa.0 MPa Minimum operating pressure 0.0 MPa 0.0 MPa mbient and fluid temperature Cushion Rod end thread Without auto switch: to 0 C (No freezing) : to 0 C (No freezing) Rubber bumper Female thread +.0 mm Stroke length tolerance 0 Mounting Piston speed Through-hole/oth ends tapped common 0 to 00 mm/s llowable kinetic energy (J) Stroke length tolerance does not include the deflection of the bumper. JIS Symbol Theoretical Output Rod size Operating direction Piston area (mm 2 ) OUT IN Operating pressure (MPa) (N) Made to Order Specifications (For details, refer to pages 0, 2 and 0.) Symbol Specifications X Intermediate stroke (Using exclusive body) XC Piston rod, retaining ring, rod end nut made of stainless steel X2 Fluororubber seals X With concave shape end boss on the cylinder tube head side IN OUT IN OUT IN OUT IN OUT ody Option Description pplication vailable for Double acting, Single rod models. Mounting racket Part No. Foot () Flange Double clevis F0 -F0 -F0 -F0 -D0 -D0 -D0 -D0 Note) When ordering foot bracket, order 2 pieces per cylinder. Note2) Parts belonging to each bracket are as follows. Foot or Flange style: ody mounting bolt Double clevis style: Clevis pin, type C retaining ring for axis, ody mounting bolt Manufacture of Intermediate Stroke Part no. Standard stroke Example Description Description Refer to pages to for cylinders with auto switches. Spacer is installed in the standard stroke body. Refer to How to Order for the standard model no. (page ). Intermediate strokes by the mm interval are available by using spacers with standard stroke cylinders., to 2, to Part no.: SD S-0D with 3 mm width spacer inside. dimension is. mm. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket/part no. 0

45 Compact Cylinder: nti-lateral oad Type Series S Mass/Without uto Switch Cylinder stroke (g) 0 For standard strokes Calculation: (Example) DS-DCM Cylinder mass: S-DC g Option mass: g : Double clevis style 2 g 2 g Mass/With uto Switch (uilt-in magnet) (g) Cylinder stroke dditional Mass (g) Male thread Nut. 3 2 Foot style (Including mounting bolt) Rod side flange style (Including mounting bolt) Head side flange style (Including mounting bolt) 3 Double clevis style (Including pin, retaining ring, bolt) Mounting olt for S Mounting method: Mounting bolt for through-hole mounting style of S is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x pcs. Mounting bolt Note) When mounting a cylinder with throughhole, be sure to use the attached plain washer. Cylinder model SDC DC DC DC DC DC SDC DC DC DC DC DC SDC DC DC DC Mounting olt for CDQSS with uto Switch C... D Mounting bolt size M3 x x 3 x 0 x x 0 x M3 x x 3 x 0 x x 0 x M x x 3 x 0 x Cylinder model SDC DC 3DC 0DC DC 0DC SDC DC DC DC DC DC 3DC 0DC DC 0DC C.. D Mounting bolt size M x 0 x x 0 x x 0 x M x 3 x 0 x x 0 x x 0 x x 0 x x 0 Material: Chromium molybdenum steel CUJ CU CQ2 RQ CQM MU Mounting method: Mounting bolt for through-hole mounting style of CQQSS is available as an option. Ordering: dd the word olt in front of the bolts to be used. Example) olt M3 x 3 pcs. Mounting bolt Note) When mounting a cylinder with throughhole, be sure to use the attached plain washer. Cylinder model CDQSSDC DC DC DC DC DC CDQSSDC DC DC DC DC DC CDQSSDC DC DC DC C... D Mounting bolt size M3 x 3 x 0 x x 0 x x 0 M3 x 3 x 0 x x 0 x x 0 M x 0 x x 0 x Cylinder model CDQSSDC DC 3DC 0DC DC 0DC CDQSSDC DC DC DC DC DC 3DC 0DC DC 0DC C.. D Mounting bolt size M x 0 x x 0 x x 0 x M x x 0 x x 0 x x 0 x x 0 x x 0 Material: Chromium molybdenum steel D- Individual Technical data

46 Series S Construction asic style (uilt-in magnet) ø, ø ø, ø Component Parts No. Description Material Note Cylinder tube Collar Piston Piston rod Retaining ring Rod end nut Spacer for switch type umper umper ushing Wear ring Magnet Rod seal Piston seal Tube gasket luminum alloy luminum alloy luminum alloy Stainless steel Carbon tool steel Carbon steel luminum alloy Urethane Urethane Oil-impregnated sintered alloy Resin NR NR NR Hard anodized nodized Chromated Phosphate coated Nickel plated Chromated Replacement Parts/Seal Kit Kit no. Contents -PS -PS -PS Set of nos. above -PS Seal kit includes,,. Order the seal kit, based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g) 2

47 Compact Cylinder: nti-lateral oad Type Series S Dimensions: ø to ø asic style (Through-hole/oth ends tapped common): S/CDQSS ø ø 2 x x øo counterbore R H thread effective depth C 2 x x O effective depth R Note) 2 x M x 0. uto switch Minimum lead wire bending radius x øn through Flat washer + Stroke + Stroke CUJ CU ø, ø Width across flats MM CQ2 RQ CQM H MU C X Rod End Male Thread 3 C H... MM M x 0. M x.0 M x. M x. X.. asic Style to to to 0 to 0 Without auto switch C D E F.. H M3 x 0. M x 0. M x 0. M x.0 I K Note) For basic style to stroke with ø and stroke with ø, through-hole is threaded over the entire length. For details about the rod end nut and accessory brackets, refer to page. M.. 2 N O M x 0. M x 0. M x.0 M x.0 O.. Q.. R R T D- Individual Technical data

48 Series S Dimensions: ø to ø Foot style: S/CDQSS H Y + Stroke Special cap bolt Foot Style to to to 0 to 0 Without auto switch S S X Z x ød X Y Y X S + Stroke + Stroke T G D G H T X Y Z X Y Foot bracket material: Carbon steel Rod side flange style: FS/CDQSFS 2 x øfd Rod end nut + Stroke + Stroke Rod Side Flange Style FD.... to to to 0 to 0 FT.. Without auto switch FV 3 2 FX FZ Flange bracket material: Carbon steel Head side flange style: GS/CDQSGS + Stroke + Stroke Rod end nut 2 x øfd Head Side Flange Style to to to 0 to 0 FD.... FT.. Without auto switch FV 3 2 FX FZ Flange bracket material: Carbon steel Double clevis style: DS/CDQSDS + Stroke C + Stroke + Stroke Rod end nut Cap bolt øcd hole H Rod d Double Clevis Style to to to 0 to 0 C 2 CD Without auto switch.. 2. CT CU C CW CX CZ C For details about the rod end nut and accessory brackets, refer to page. RR Double clevis bracket material: Carbon steel

49 Compact Cylinder Series Proper uto Switch Mounting Position (Detection at stroke end) and Its Mounting Height Double acting: Single rod, Single acting: Single rod, Spring return/spring extend; ong stroke type, nti-lateral load type, Double acting: Double rod) D- ø Mounting a) b) ø to ø Mounting a) b) D- V Hs Hs D-M D-M W D-M D-M V D-M WV D-M V Proper uto Switch Mounting Position uto switch D- D- V D-M /M W D-M V/M WV/M V model W Hs W Hs Double cting, Single Rod; Single cting, Single Rod, Spring Return/Spring Extend ong Stroke. (2.) nti-lateral oad Type... Double cting, Double Rod Hs Proper uto Switch Mounting Position (Detection at stroke end) Double acting: Single rod, Single acting: Single rod, Spring return/spring extend; ong stroke type, nti-lateral load type, Double acting: Double rod). 2.. [] (2. []) 2 [.]. [] 3. [] [-2.]. [2] [.] [.] [3.] 0. [3] 3. []. [3] 3. [] 3 [.] [.] [.]. (2.) (.) Note ) The product is shipped out of the factory in installation state a). To change the electrical entry direction of the switch on the head, refer to installation state b). Note 2) Negative figures in the table W indicate an auto switch is mounted inward from the edge of the cylinder body. Note 3) The D-M /M W and M cannot be installed on the single acting: single rod type. Note ) djust the auto switch after confirming the operating conditions in the actual setting. 3. (.) Hs. (.) [ ]: Denotes the values of D-3. ( ): Denotes the values of type T.. (.) (.) D-M W. (.) (.) (.) CUJ CU CQ2 RQ CQM MU D- Individual Technical data

50 Series S Proper uto Switch Mounting Position (Detection at stroke end) Non-rotating rod ø D- Mounting a) b) ø to ø Mounting a) b) D- V Hs Hs D-M D-M W D-M D-M V D-M WV D-M V Hs Hs Proper uto Switch Mounting Position uto switch D- D- V D-M /M W D-M V/M WV/M V model W Hs W Hs. 0. () (.) () () ( ): Denotes the values of D-3. uto switch model D-M W Note ) The product is shipped out of the factory in installation state a). To change the electrical entry direction of the switch on the head, refer to installation state b). Note 2) djust the auto switch after confirming the operating conditions in the actual setting.

51 Compact Cylinder Series Operating Range uto switch model D- / V D-M /M V D-M W/M WV D-M /M V 3... Since this is a guideline including hysteresis, not meant to be guaranteed. (assuming approximately ±% dispersion.) There may be the case it will vary substantially depending on an ambient environment. Minimum uto Switch Mounting Stroke No. of auto switch mounted D-M V D- D-M WV D-M V D- V D-M D-M W D-M pc. 2 pcs. () () () Note ) When the cylinder is used under the strokes indicated, consult with. Note 2) The D-M /M W and M cannot be installed on the single acting: single rod type. Precautions e sure to read before handling. Refer to front matters and for Safety Instructions and pages 3 to for ctuator and uto Switch Precautions. If the cylinder is used in an application in which a magnetic material is placed in close contact around the cylinder as shown in the graph on the right (including cases in which even one of the sides is in close contact) the operation of auto switches could become unstable. Therefore, please check with for this type of application. Magnetic substance (Iron plate, etc.) Magnetic substance (Iron plate, etc.) CUJ CU CQ2 RQ Other than the applicable auto switches listed in How to Order, the following auto switches can be mounted. Normally closed (NC = b contact), solid state auto switch (D-FG/FH type, and D-F type) are also available. For details, refer to pages and 0. For solid state auto switches, auto switches with a pre-wired connector are also available. Refer to pages 32 and 32 for details. CQM MU D- Individual Technical data

52 Series - - X ow speed cylinder ø, ø, ø, ø How to Order Clean series Relief type Vacuum suction type C D QSX D M Nil D uilt-in magnet No (uilt-in magnet) ow speed cylinder Number of auto switches Nil S n Type of auto switch Reed switch Solid state switch 3 F, F 2 pcs. pc. n pcs. Mounting Through-hole/oth ends tapped (Standard) mm mm mm mm Rod end thread Nil M Standard (Rod end female thread), Cylinder stroke Standard stroke,,,,,,,,,,, 3, 0,, 0 Manufacturing of intermediate stroke Intermediate strokes by the mm interval are available by using spacers with standard stroke cylinders. The overall length of cylinder will be the same as the standard stroke with a longer one. ction D Double acting Example) -X-D : Install a 3mm width spacer in a standard stroke cylinder, -X-0D. Model Relief type Vacuum suction type Model -X -X -X -X -X -X -X -X Port size M x 0. ubrication Non-lube ction Double acting single rod Standard stroke,,,,,,,,,,, 3, 0,, 0,,,,,,,,,,, 3, 0,, 0 uto switch mounting Cushion Rubber ir 0