Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Transcription

1 ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side bossed Head flange New RoHS Head cover with boss Easy fine adjustment of auto switch position Fine adjustment of the auto switch position is possible by simply loosening the screw attached to the auto switch. Transparent switch bracket improves visibility of indicator LED. Fine adjustment of auto switch LED colour indicator Rod end deflection accuracy improved Rod end deflection is reduced by mounting a wear ring to the piston as standard. Deflection Wear ring Screw attached to auto switch Switch bracket Series/ set additionally type: Double rod, Single acting Non-rotating rod type Direct mount type Direct mount, Non-rotating rod type : Heat resistant cylinder (-XB6), Dual stroke cylinder (-XC1, 11) etc. are added. Series CT.EUS2-226B-UK

2 ir Cylinder Part numbers with rod end bracket and/or pivot bracket available Not necessary to order a bracket for the applicable cylinder separately Note) Mounting bracket is shipped together with the product, but not assembled. Example) CDJ2D16-5- N W -M9BW-B Pivot bracket None Pivot bracket is shipped together with the N product, but not assembled. Only for D (double clevis) type N: Kit of pivot bracket and double clevis Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (Flat type) U Rod end cap (Round type) With rod end bracket V: Single knuckle joint W: Double knuckle joint Rod end cap T: Flat type U: Round type Various mounting bracket options Suitable mounting brackets can be selected for the installation condition. Double clevis Improved amount of mounting freedom Pivot bracket Head flange Rod end cap (Round type) Rod flange Basic Double-side bossed Single foot Double foot Rod end cap (Flat type) Single knuckle joint Double knuckle joint 2 mounting types of compact auto switches Band mounting Rail mounting The auto switch mounting type, band or rail can be selected with the model number. Water resistant compact auto switch now available Solid state auto switch D-M9 (V) pplicable to lead wire perpendicular entry type No environmental hazardous substances used Features 1 Band mounting Rail mounting Specifications and dimensions are the same as the existing product. Head cover 4 types of head cover shape are available. Basic xial piping Double clevis With boss

3 Series Easy fine adjustment of auto switch position Fine adjustment of the auto switch set position can be performed by loosening the auto switch attached screw without loosening the auto switch mounting band. Operability improved compared with the conventional auto switch set position adjustment, where the complete switch mounting band requires loosening. Switch bracket Visibility of the indicator LED improved with the transparent arent resin switch bracket ( specification) Switch holder Screw attached to auto switch uto switch uto switch mounting band uto switch mounting screw Stroke Variations Bore size 1 16 Series Variations Series stroke Series ction Type Bore size Variations 1 16 Built-in magnet ir cushion Page Double acting Single rod Page 1 Double acting Double rod Page 13 Single acting Single rod Spring return/extend Page 2 Non-rotating rod K- Double acting Single rod Page 32 Single acting Single rod Spring return/extend Page 39 Built-in speed controller - Double acting Single rod Page 51 Double acting Double rod Page 58 Direct mount R- Double acting Single rod Page 63 Single acting Single rod Spring return/extend Page 67 Direct mount, Non-rotating rod RK- Double acting Single acting Single rod Single rod Spring return/extend Page 71 Page 74 For standard type with bore size of 6 mm, refer to the conventional series ( Features 2

4 Combinations of Products and Specifications Series : : : Special product (Please contact SMC for details.) : Not available Symbol Specifications Series ction/ Type Page pplicable bore size ( type) K (Non-rotating rod type) Double acting Single acting Double acting Single acting Single rod Double rod Single rod (spring return) Single rod Single rod (spring extend) Single rod (spring return) Page 1 Page 13 Page 2 Page 32 Page 39 ø1, ø16 ø1, ø16 Single rod (spring extend) D Built-in magnet - ir cushion ø1, ø16 1- Clean series Note 1) 25 Copper (Cu) and inc (n)-free XB6 Heat resistant cylinder ( 1 to 15 C) Note 3) Note 4) XB7 Cold resistant cylinder ( 4 to 7 C) Note 3) Note 4) XB9 Low speed cylinder (1 to 5 mm/s) Note 4) XC3 Special port position Note 2) Note 4) XC8 djustable stroke cylinder/ djustable extension type Note 4) djustable stroke cylinder/ XC9 djustable retraction type Note 4) ø1, ø16 XC1 Dual stroke cylinder/double rod type Note 4) XC11 Dual stroke cylinder/single rod type Note 4) XC22 Fluororubber seal Note 4) XC51 With hose nipple XC85 Grease for food processing equipment X446 PTFE grease Note 1) Mounting style: Not compatible with the clevis type. n auto switch is available in the band mounting type only. Note 2) n auto switch is available in the band mounting type only. Note 3) The products with an auto switch are not compatible. Note 4) The products with an air cushion are not compatible. Front matter 1

5 Series (Built-in speed controller type) R (Direct mount type) RK (Direct mount, Non-rotating rod type) Double acting Double acting Single acting Double acting Single acting Single rod Double rod Single rod Single rod (spring return) Single rod Single rod (spring extend) Single rod (spring return) Page 51 Page 58 Page 63 Page 67 Page 71 Page 74 Single rod (spring extend) ø1, ø16 Symbol D XB6 XB7 XB9 XC3 XC8 XC9 XC1 XC11 XC22 XC51 XC85 X446 Double cting, Single Rod Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod W K K W R R RK RK uto Switch Front matter 2

6 ir Cylinder: Type Double cting, Single Rod Series ø1, ø16 RoHS How to Order B 16 6 V With auto switch CDJ2 D 16 6 N W M9BW B B Basic E Double-side bossed D Double clevis L Single foot M Double foot F Rod fl ange G Head fl ange Mounting bracket is shipped together with the product, but not assembled. For double clevis, the product is perpendicular to the cylinder axis. For double-side bossed, the product is perpendicular to the cylinder axis. 1 Built-in magnet Mounting Cushion Rubber bumper ir cushion Bore size 1 16 Bore size 1 1 mm mm stroke stroke 15, 3, 45, 6, 75, 1, 125, 15 15, 3, 45, 6, 75, 1, 125, 15, 175, 2 Manufacture of intermediate strokes in 1 mm intervals is possible. (Spacers are not used.) Produced upon receipt of order. Head cover port location Perpendicular to axis R xial Pivot bracket None Pivot bracket is shipped N together with the product, but not assembled. Only for D (double clevis) Pivot bracket is shipped together with the product, but not assembled. Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (Flat type) U Rod end cap (Round type) Rod end bracket is shipped together with the product, but not assembled. knuckle joint pin is not provided with the single knuckle joint. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Solid state auto switch Indicator light Refer to page 2 for details. uto switch mounting type Rail mounting B Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. uto switch Without auto switch For applicable auto switches, refer to the table below. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) None DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit 3-wire 5 V (NPN equivalent) 96V 96 96V 96 IC circuit Yes 2 V 72 72H Grommet 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Since there are other applicable auto switches than listed above, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only the auto switch mounting brackets are assembled before shipment.) Reed auto switch

7 ir Cylinder: Type Double cting, Single Rod Series Symbol Rubber bumper Symbol Cylinder model: CDJ2D16-6-NW-M9BW-B Double knuckle joint uto switch Band mounting ir cushion (For details, refer to pages 87 to 95.) Specifi cations -X Change of rod end shape -XB6 Heat resistant cylinder ( 1 to 15 C) Not available with switch & with air cushion -XB7 Cold resistant cylinder ( 4 to 7 C) Not available with switch & with air cushion -XB9 Low speed cylinder (1 to 5 mm/s) Not available with air cushion -XC3 Special port location Not available with air cushion -XC8 djustable stroke cylinder/djustable extension type -XC9 djustable stroke cylinder/djustable retraction type -XC1 Dual stroke cylinder/double rod type -XC11 Dual stroke cylinder/single rod type -XC22 Fluororubber seal Not available with air cushion -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Ordering Example of Cylinder ssembly Double clevis Pivot bracket Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. Specifications Bore size 1 16 ction Double acting, Single rod Fluid ir Proof pressure 1 MPa Maximum operating pressure 1.7 MPa Minimum operating Rubber bumper.6 MPa pressure ir cushion.1 MPa mbient and fluid temperature Without auto switch: 1 C to 7 C (No freezing) With auto switch: 1 C to 6 C Cushion Rubber bumper/ir cushion Lubrication Not required (Non-lube) Piston speed Rubber bumper 5 to 75 mm/s ir cushion 5 to 1 mm/s llowable kinetic energy Rubber bumper.35 J.9 J Stroke length tolerance Option ir cushion (Effective cushion length) Mounting Brackets/Part No. T-bracket is used with double clevis (D)..7 J (9.4 mm).18 J (9.4 mm) Mounted on the product. Please order these separately. Mounting Basic Foot Flange Double Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint Rod end cap (Flat/Round type) T-bracket pin and retaining rings are included with double clevis and/or double knuckle joint. Mounting bracket 1 Bore size 16 Foot CJ-L1C CJ-L16C Flange CJ-F1C CJ-F16C T-bracket CJ-T1C CJ-T16C Weights [g] Bore size Rubber bumper ir cushion Basic Basic weight xial piping (When the stroke Double clevis (including clevis pin) is zero) Head-side bossed dditional weight per 15 mm of stroke Single foot Mounting bracket Double foot weight Rod flange Head flange Single knuckle joint Double knuckle joint (including knuckle pin) ccessories Rod end cap (Flat type) Rod end cap (Round type) T-bracket Mounting nut and rod end nut are included in the basic weight. Note) Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) L1-45 Basic weight 22 (ø1) dditional weight 4/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 8 (xial foot) /15 x = 42 g +1. Mounting and ccessories/for details, refer to page Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch

8 Series Precautions Refer to page 96 before handling. Clean Series 1- Mounting style Bore size Stroke Head cover port location Clean Series ir cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator s rod section having a double seal construction. Specifications ction Double acting, Single rod Bore size 1, 16 Maximum operating pressure.7 MPa Minimum operating pressure.8 MPa Cushion Rubber bumper/ir cushion stroke Same as standard type. (Refer to page 1.) uto switch Mountable (Band mounting type) Mounting Construction Basic, Double-side bossed, Single/Double foot, Rod/Head flange For the detailed specifications, refer to 3

9 ir Cylinder: Type Double cting, Single Rod Series Construction (Not able to i q!1 e r u y! t!2 w W Double cting, Single Rod With auto switch Single cting, Spring Return/Extend With air cushion!7!4!9 r!8 i q o!1 e u y!!3!2 t!6!5 w K With auto switch Component Parts No. Description Material Note 1 Rod cover luminium alloy nodised 2 Head cover luminium alloy nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane 8 Rod seal R 9 Check seal R 1 Piston seal R No. Description Material Note 11 Tube gasket R 12 Wear ring Resin 13 Piston gasket R 14 Cushion needle Carbon steel 15 Cushion ring luminium alloy 16 Cushion ring gasket R 17 Needle seal R 18 Mounting nut Rolled steel inc chromated 19 Rolled steel inc chromated 2 Magnet W R R RK RK uto Switch Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount, Non-rotating Rod Double cting, Double Rod 4

10 Series Dimensions Basic (B) B Bore size Stroke Head cover port location Y G Piping port 2 x M5 x.8 GB NN ød.3 B H F N + Stroke B.3 øndh8 Piping port M5 x.8 Section Y detail xial location (R) The overall cylinder length does not change. With air cushion: B Bore size Stroke Head cover port location Piping port M5 x.8 G Piping port 2 x M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. GB.3 45 B N + Stroke B.3 W WB For details of the mounting nut, refer to page 12. Bore size B C D F G GB H N NDh8 NN S M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G GB N W WB S

11 ir Cylinder: Type Double cting, Single Rod Series Dimensions Single foot (L) L Bore size Stroke Head cover port location Piping port M5 x.8 2 x ølc Mounting hole Double cting, Single Rod Double cting, Double Rod W B.3 45 B.3 B.3 B.3 NN LT G ød F G X Y N H N W Piping port 2 x M5 x.8 Piping port 2 x M5 x.8 + Stroke With air cushion: L Bore size Stroke Head cover port location + Stroke Head cover port location xial location (R) The overall cylinder length does not change. GB Piping port M5 x.8 GB WB LX L Head cover port location xial location (R) The overall cylinder length does not change. Cover surface LH LB LY Cover surface For details of the mounting nut, refer to page 12. Bore size B C D F G GB H LB LC LH LT LX LY L N NN S X Y M4 x M8 x M5 x M1 x LB Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod K K W R R RK RK uto Switch With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G GB LB N W WB S

12 Series Dimensions Double foot (M) M Bore size Stroke 4 x ølc Mounting hole H NN ød F G Piping port 2 x M5 x.8 GB F NN Cover surface LT LT LH LB LY X Y N Y X LX L L + Stroke With air cushion: M Bore size Stroke 45 G Piping port 2 x M5 x.8 GB Cover surface B.3 LB.3 B View E N + Stroke View E W WB For details of the mounting nut, refer to page 12. Bore size D F G GB H LB LC LH LS LT LX LY L N NN S X Y M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G GB LB N W WB S

13 .3.3 ir Cylinder: Type Double cting, Single Rod Series Dimensions Rod flange (F) F Bore size Stroke Head cover port location B B.3 NN ød H F G FT N Piping port 2 x M5 x.8 + Stroke Piping port M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. GB Cover surface FX F FB FY 2 x øfc Mounting hole Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod W K K With air cushion: F Bore size Stroke Head cover port location 45 B.3 B G N W Piping port 2 x M5 x.8 + Stroke GB WB Piping port M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. Cover surface FB Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount, Non-rotating Rod W R R RK RK For details of the mounting nut, refer to page 12. Bore size B C D F FB FC FT FX FY F G GB H N NN S M4 x M8 x M5 x M1 x uto Switch With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C FB G GB N W WB S

14 .3.3 Series Dimensions Head flange (G) G Bore size Stroke Cover surface NN ød G Piping port 2 x M5 x.8 GB NN FB FY B FX F 2 x øfc Mounting hole H F N F FT B.3 + Stroke With air cushion: G Bore size Stroke Cover surface G Piping port 2 x M5 x.8 GB 45 FB B N + Stroke B.3 W WB For details of the mounting nut, refer to page 12. Bore size B C D F FB FC FT FX FY F G GB H N NN S M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C FB G GB N W WB S

15 ir Cylinder: Type Double cting, Single Rod Series Dimensions Double clevis (D) D Bore size Stroke Double cting, Single Rod C ød G Piping port 2 x M5 x.8 GB DH9 +.3 Clevis pin (øcdd9.6) B.3 Double cting, Double Rod Single cting, Spring Return/Extend W C.3 CX H N + Stroke + Stroke U R B.3 Non-rotating Rod K K With air cushion: D Bore size Stroke C G Piping port 2 x M5 x.8 GB B 45 Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W C.3 N + Stroke + Stroke B.3 Direct Mount R R W clevis pin and retaining rings are included. Bore size B C CD (cd) CX C D G GB H N R S U M4 x M5 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C C G GB N W WB S WB 1 Direct Mount, Non-rotating Rod RK RK uto Switch

16 Series Dimensions Double-side bossed (E) E Bore size Stroke NN G Piping port 2 x M5 x.8 GB YY NN F N B.3 ød.3 øndh8 øndh8 Section Y detail Section YY detail Y B H F + Stroke With air cushion: E Bore size Stroke G Piping port 2 x M5 x.8 GB 45.3 B N + Stroke F B.3 W WB For details of the mounting nut, refer to page 12. Bore size B C D F G GB H N NDh8 NN S M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G GB N W WB S

17 Single Knuckle Joint Series Dimensions of ccessories (Option) Clevis Pin Knuckle Pin Double cting, Single Rod 12 Double cting, Double Rod W Material: Rolled steel Part no. pplicable bore size 1 L1 NDH1 NX R1 U1 I-J1C M4 x I-J16C M5 x Double Knuckle Joint Material: Stainless steel Part no. pplicable bore size Dd9 d L L1 m t Included retaining ring CD-J Type C 3.2 CD Type C 5 CD-J Type C 3.2 For ø1 double clevis type, with air cushion and built-in speed controller. Retaining rings are included with a clevis pin. Mounting Nut Material: Stainless steel Part no. pplicable bore size Dd9 d L L1 m t Included retaining ring CD-J Type C 3.2 IY-J Type C 5 For size ø1, a clevis pin is diverted. Retaining rings are included with a knuckle pin. Rod End Nut Single cting, Spring Return/Extend Non-rotating Rod K K 12 TT TK TX TV TN 7 TU x øtc T TH ønd hole H1 xis dg Material: Rolled steel pplicable Part no. bore size 1 L L1 Y-J1C M4 x.7 Y-J16C M5 x.8 Part no. NDd9 NDH1 NX R1 U1 Y-J1C Y-J16C knuckle pin and retaining rings are included. T-bracket () Part no. (U) TY TW TDH1 pplicable Part no. bore size TC TDH1 TH TK TN TT TU TV TW TX TY T CJ-T1C CJ-T16C T-bracket includes a T-bracket base, single knuckle joint, hexagon socket head bolt and spring washer. For dimensions of (U) and (), refer to the double clevis drawing on page 1. Material: Carbon steel pplicable bore size B1 C1 d H1 SNJ-1C M8 x 1. 4 SNJ-16C M1 x 1. 4 SNKJ-16C M12 x 1. 4 For ø16 non-rotating type. (Use SNJ-16C for ø1 non-rotating type.) Rod End Cap Flat type/cj-cf Part no. Material: Carbon steel pplicable bore size B2 C2 d H2 NTJ-1C M4 x NTJ-15C M5 x.8 4 Round type/cj-cr Material: Polyacetal Part no. pplicable Flat type Round type bore size D L N R W CJ-CF1 CJ-CR M4 x CJ-CF16 CJ-CR M5 x Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W R R RK RK uto Switch

18 ir Cylinder: Type Double cting, Double Rod Series W ø1, ø16 RoHS How to Order W B 16 6 With auto switch CDJ2W L 16 6 M9BW B Built-in magnet Mounting B Basic L Foot Bore size F Flange 1 1 mm mm Mounting bracket is shipped together with the product, but not assembled. Bore size 1 16 stroke stroke 15, 3, 45, 6, 75, 1, 125, 15 15, 3, 45, 6, 75, 1, 125, 15, 175, 2 Manufacture of intermediate strokes in 1 mm intervals is possible. (Spacers are not used.) Produced upon receipt of order. Cushion Rubber bumper ir cushion For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. uto switch uto switch mounting type Rail mounting B Band mounting Number of auto switches 2 pcs. S 1 pc. n n pcs. Without auto switch For applicable auto switches, refer to the table below. Refer to page 14 for details. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) None DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit 3-wire 5 V (NPN equivalent) 96V 96 96V 96 IC circuit Yes 2 V 72 72H Grommet 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Since there are other applicable auto switches than listed above, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only the auto switch mounting brackets are assembled before shipment.) Solid state auto switch Reed auto switch 13 Indicator light

19 ir Cylinder: Type Double cting, Double Rod Series W Symbol Double acting, Double rod, Rubber bumper ir cushion Symbol -X -XB6 -XB7 (For details, refer to pages 87 to 95.) Specifi cations Change of rod end shape Heat resistant cylinder ( 1 to 15 C) Not available with switch & with air cushion Cold resistant cylinder ( 4 to 7 C) Not available with switch & with air cushion -XC22 Fluororubber seal Not available with air cushion -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Precautions Refer to page 96 before handling. Specifications Bore size 1 16 ction Double acting, Double rod Fluid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating Rubber bumper.1 MPa pressure ir cushion.1 MPa mbient and fluid temperature Without auto switch: 1 C to 7 C (No freezing) With auto switch: 1 C to 6 C Cushion Rubber bumper/ir cushion Lubrication Not required (Non-lube) Piston speed Rubber bumper 5 to 75 mm/s ir cushion 5 to 1 mm/s llowable kinetic energy Rubber bumper.35 J.9 J Stroke length tolerance Option ir cushion (Effective cushion length).7 J (9.4 mm) +1. Mounting and ccessories/for details, refer to page J (9.4 mm) Mounted on the product. Please order separately. Mounting Basic Foot Flange Mounting nut Single knuckle joint Double knuckle joint Rod end cap (Flat/Round type) pin and retaining rings are shipped together with double knuckle joint. Mounting Brackets/Part No. Mounting bracket 1 Bore size 16 Foot CJ-L1C CJ-L16C Flange CJ-F1C CJ-F16C Weights Bore size Rubber bumper ir cushion Basic weight (When the stroke is zero) Basic dditional weight per 15 mm of stroke Mounting bracket Foot weight Flange Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (Flat type) Rod end cap (Round type) Mounting nut and rod end nut are included in the basic weight. Calculation: Example) WL1-45 Basic weight 29 (ø1) dditional weight 4.5/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 16 (Foot) /15 x = 58.5 g [g] 14 Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch

20 Series W Clean Series 1-W Mounting style Bore size Stroke Clean Series ir cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator s rod section having a double seal construction. Specifications ction Double acting, Double rod Bore size 1, 16 Maximum operating pressure.7 MPa Minimum operating pressure.1 MPa Cushion Rubber bumper stroke Same as standard type. (Refer to page 13.) uto switch Mountable (Band mounting type) Mounting Basic, Foot, Flange For the detailed specifications, refer to the Construction (Not able to disassemble) 15

21 ir Cylinder: Type Double cting, Double Rod Series W Construction (Not able to disassemble)!7!6 uq! w e y t o!1 r With air cushion!7 e!6 uq i! wyt o!1 r!3!4!5!2!8 With auto switch!8 Double cting, Single Rod Double cting, Double Rod W K K Component Parts No. Description Material Note 1 Rod cover luminium alloy nodised 2 Cylinder tube Stainless steel 3 Piston rod Stainless steel 4 Piston luminium alloy 5 Piston B luminium alloy 6 Bumper Urethane 7 Rod seal R 8 Check seal R 9 Piston seal R 1 Tube gasket R 11 Piston gasket R With auto switch No. Description Material Note 12 Cushion needle Carbon steel 13 Cushion ring luminium alloy 14 Cushion ring gasket R 15 Needle seal R 16 Mounting nut Rolled steel inc chromated 17 Rolled steel inc chromated 18 Magnet W R R RK RK Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod uto Switch Direct Mount, Non-rotating Rod 16

22 Series W Basic (B) WB Bore size Stroke NN G Piping port 2 x M5 x.8 B ød øndh8 G øndh8 NN ød F N N F H + 2 x Stroke H + Stroke B With air cushion: WB Bore size Stroke G Piping port 2 x M5 x.8 45 B N + 2 x Stroke N B W W For details of the mounting nut, refer to page 12. Bore size B C D F G H N ND h8 NN S M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G N W S

23 ir Cylinder: Type Double cting, Double Rod Series W Foot (L) WL Bore size Stroke 2 x ølc Mounting hole Double cting, Single Rod B 45 View E B B LT B NN ød X H F Y G N W Piping port 2 x M5 x.8 With air cushion: WL Bore size Stroke View E View E G F NN LT N Y X + 2 x Stroke G Piping port 2 x M5 x.8 N + 2 x Stroke N G W ød H + Stroke View E LX L Cover surface LH LB LY Cover surface LB Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W R R For details of the mounting nut, refer to page 12. Bore size B C D F G H LB LC LH LT LX LY L N NN S X Y M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G LB N W S Direct Mount, Non-rotating Rod RK uto Switch RK 18

24 Series W Flange (F) WF Bore size Stroke NN G Piping port 2 x M5 x.8 G NN Cover surface B FB FY ød ød B FT F N H N F H + Stroke + 2 x Stroke FX F 2 x øfc Mounting hole With air cushion: WF Bore size Stroke 45 G Piping port 2 x M5 x.8 Cover surface B FB B N + 2 x Stroke N W W For details of the mounting nut, refer to page 12. Bore size B C D F FB FC FT FX FY F G H N NN S M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G FB N W S

25 ir Cylinder: Type Single cting, Spring Return/Extend Series ø1, ø16 Double cting, Single Rod With auto switch (Built-in magnet) Mounting Basic Double-side bossed Double clevis Single foot Double foot Rod fl ange Head fl ange Mounting bracket is shipped together with the product, but not assembled. Cylinder standard stroke Refer to Strokes on page 21. L Bore size How to Order 45 With auto switch Solid state auto switch B E D L M F G CDJ2 Indicator light L mm mm S S ction S Single acting, Spring return T Single acting, Spring extend If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. Head cover port location Perpendicular to axis R xial M9BW uto switch For double clevis, the product is perpendicular to the cylinder axis. For double-side bossed, the product is perpendicular to the cylinder axis. Not applicable to single acting, spring extend (T). pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN B Refer to page 21 for details. uto switch mounting type B For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. Rail mounting Band mounting Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit Reed auto switch For applicable auto switches, refer to the table below. 3-wire 5 V Grommet Yes (NPN equivalent) 96V 96 96V 96 IC circuit 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 2 Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch

26 Series Specifications Spring extend Spring return Symbol Single acting, Spring return, Rubber bumper No freezing Bore size 1 16 ction Fluid Proof pressure Maximum operating pressure Minimum operating Spring return pressure Spring extend mbient and fluid temperature Cushion Lubrication Stroke length tolerance Single acting, Spring return/single acting, Spring extend ir 1 MPa.7 MPa.15 MPa.15 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper Not required (Non-lube) +1. Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Single acting, Spring extend, Rubber bumper (For details, refer to pages 87 to 95.) Symbol Specifications -X Change of rod end shape -XC22 Fluororubber seal -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Strokes Bore size stroke 1 15, 3, 45, , 3, 45, 6, 75, 1, 125, 15 Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Mounting Brackets/Part No. Spring Reaction Force Spring with primary mounting load IN Bore size Spring reaction force [N] Primary Secondary When the spring is set in the cylinder Spring with secondary mounting load OUT When the spring is contracted by applying air Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Precautions Refer to page 96 before handling. Mounting bracket Bore size 1 16 Foot CJ-L1C CJ-L16C Flange CJ-F1C CJ-F16C T-bracket CJ-T1C CJ-T16C T-bracket is used with double clevis (D). Mounting and ccessories/for details, refer to page 12. Option Mounted on the product. Please order separately. Mounting Basic xial foot Rod fl ange Double clevis Mounting nut Clevis pin Single knuckle joint Double knuckle joint T-bracket pin and retaining rings are shipped together with double clevis and double knuckle joint. For the attached bracket weight, refer to page

27 ir Cylinder: Type Single cting, Spring Return/Extend Series Weights Spring Return Bore size 1 16 Basic weight Mounting bracket weight ccessories Mounting Basic xial piping Double clevis (including clevis pin) Headside Basic bossed xial piping Double clevis (including clevis pin) Headside bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot 8 25 Double foot 16 5 Rod fl ange 5 13 Head fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 Mounting nut and rod end nut are included in the basic weight. Note) Mounting nut is not attached to the double clevis, so the mounting nut weight is already subtracted. Calculation: Example) L1-45S Basic weight 44 (ø1-45 stroke) Mounting bracket weight 8 (Single foot) = 52 g [g] Spring Extend Bore size 1 16 Basic weight Mounting bracket weight ccessories Mounting Basic xial piping Double clevis (including clevis pin) Headside Basic bossed xial piping Double clevis (including clevis pin) [g] Headside bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot 8 25 Double foot 16 5 Rod fl ange 5 13 Head fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 Mounting nut and rod end nut are included in the basic weight. Note) Mounting nut is not attached to the double clevis, so the mounting nut weight is already subtracted. Calculation: Example) L1-45T Basic weight 42 (ø1-45 stroke) Mounting bracket weight 8 (Single foot) = 5 g Double cting, Single Rod Double cting, Double Rod W K K W R R RK RK Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod uto Switch Direct Mount, Non-rotating Rod 22

28 Series Construction (Not able to disassemble) Single acting, Spring return CDJ2B1/16- S-B Single acting, Spring extend CDJ2B1/16- T-B Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane 8 Bumper B Urethane 9 Piston seal R No. Description Material Note 1 Tube gasket R 11 Wear ring Resin 12 Return spring Piano wire inc chromated 13 Spring seat luminium alloy 14 Mounting nut Rolled steel inc chromated 15 Rolled steel inc chromated 16 Magnet 17 Rod seal R 23

29 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Return: Basic (B) B Bore size Stroke S Head cover port location øndh8 Double cting, Double Rod W Double cting, Single Rod Section Y detail øndh8 Y NN ød H E Bore size Stroke S NN ød F Y N F N H + Stroke + Stroke Piping port M5 x.8 GB GB Piping port M5 x.8 F B YY NN B B B Piping port M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. For details of the mounting nut, refer to page 12. S Bore B C D F GB H N ND h8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x Single cting, Spring Return: Double-side Bossed (E) Section Y detail øndh8 Section YY detail Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount, Non-rotating Rod K K W R R RK RK For details of the mounting nut, refer to page 12. S Bore B C D F GB H N ND h8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x uto Switch

30 Series Single cting, Spring Return: Double Clevis (D) D Bore size Stroke S Piping port M5 x.8 GB DH9 +.3 Clevis pin (øcdd9.3.6) C B ød C CX H N + Stroke + Stroke U R B S Bore size B C CD CX C D GB H N R U 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Bore size 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st clevis pin and retaining rings are included. Single cting, Spring Return: Single Foot (L) L Bore size Stroke S Head cover port location Piping port M5 x.8 2 x ølc Mounting hole NN F Head cover port location xial location (R) The overall cylinder length does not change. GB Piping port M5 x.8 Cover surface B LH LB LY ød B LT X H Y N + Stroke LX L For details of the mounting nut, refer to page 12. S Bore B C D F GB H LB LC LH LT LX LY L N NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x

31 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Return: Double Foot (M) M Bore size Stroke S 2 x ølc Mounting hole Double cting, Single Rod H NN ød F GB F Piping port M5 x.8 Cover surface LH LB LY Double cting, Double Rod Single cting, Spring Return/Extend W B B LT X Y N NN ød FT F N H L + Stroke For details of the mounting nut, refer to page 12. LS Bore D F GB H LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to LT size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st LX LY L N NN M4 x M8 x M5 x M1 x 1. S Bore 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st Single cting, Spring Return: Rod Flange (F) F Bore size Stroke S Head cover port location + Stroke Y GB LT X Piping port M5 x.8 LX L Head cover port location xial location (R) The overall cylinder length does not change. Piping port M5 x.8 FX F Cover surface FB FY 2 x øfc Mounting hole For details of the mounting nut, refer to page 12. S Bore B C D F FBFC FT FXFYFGB H N NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod K K W R R RK RK uto Switch

32 Series Single cting, Spring Return: Head Flange (G) G Bore size Stroke S Cover surface NN Piping port M5 x.8 GB FB FY B ød FX F 2 x øfc Mounting hole F N H + Stroke F FT B For details of the mounting nut, refer to page 12. S Bore B C D F FB FC FT FX FY F GB H N NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x

33 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Extend: Basic (B) B Bore size Stroke T øndh8 Double cting, Single Rod Double cting, Double Rod W Y NN G Piping port M5 x.8 Section Y detail Single cting, Spring Return/Extend ød øndh8 H + Stroke E Bore size Stroke T ød F NN H + Stroke N + 2 x Stroke Y F G N For details of the mounting nut, refer to page 12. S Bore size B C D F G H N ND h8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x Single cting, Spring Extend: Double-side Bossed (E) Section Y detail Piping port M5 x x Stroke F YY NN B B B øndh8 Section YY detail B Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod K K W R R RK RK For details of the mounting nut, refer to page 12. S Bore size B C D F G H N ND h8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x uto Switch

34 Series Single cting, Spring Extend: Double Clevis (D) D Bore size Stroke T NN G Piping port M5 x.8 DH9 +.3 Clevis pin (øcdd9.3.6) C B ød C CX H + Stroke F N + 2 x Stroke + 2 x Stroke U R B clevis pin and retaining rings are included. S Bore size B C CD CX C D G H N R U 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Bore size 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st Single cting, Spring Extend: Single Foot (L) L Bore size Stroke T 2 x ølc Mounting hole NN F G Piping port M5 x.8 Cover surface B LH LB LY ød B H + Stroke LT X Y N + 2 x Stroke LX L For details of the mounting nut, refer to page 12. S Bore B C D F G H LBLCLHLT LXLY L N NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x

35 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Extend: Double Foot (M) M Bore size Stroke T H + Stroke F G Piping port M5 x.8 NN ød F 4 x ølc Mounting hole Cover surface LH LB LY Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend W LT X F Y N + 2 x Stroke L For details of the mounting nut, refer to page 12. LS Bore D F G H LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to LT size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st LX LY L N NN M4 x M8 x M5 x M1 x 1. S Bore 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st F Y LT X LX L Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod K K W Single cting, Spring Extend: Rod Flange (F) F Bore size Stroke T NN G Piping port M5 x.8 ød 2 x øfc Mounting hole Cover surface Direct Mount R R B B H + Stroke F FT N + 2 x Stroke For details of the mounting nut, refer to page 12. S Bore B C D F FB FC FT FX FY F G H N NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x FX F FB FY Direct Mount, Non-rotating Rod RK RK uto Switch 3

36 Series Single cting, Spring Extend: Head Flange (G) G Bore size Stroke T Cover surface NN G Piping port M5 x.8 FB FY B ød FX F 2 x øfc Mounting hole H + Stroke F N + 2 x Stroke F FT B For details of the mounting nut, refer to page 12. S Bore B C D F FB FC FT FX FY F G H N NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M8 x M5 x M1 x

37 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K ø1, ø16 Double cting, Single Rod With auto switch With auto switch (Built-in magnet) K CDJ2K Mounting Bore size 1 1 mm mm L B Basic E Double-side bossed D Double clevis L Single foot M Double foot F Rod fl ange G Head fl ange Mounting bracket is shipped together with the product, but not assembled. 16 How to Order 6 Cylinder standard stroke Refer to Strokes on page 33. L 16 6 M9BW B Head cover port location Perpendicular to axis R xial For double clevis, the product is perpendicular to the cylinder axis. For double-side bossed, the product is perpendicular to the cylinder axis. uto switch For applicable auto switches, refer to the table below. If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. Refer to page 33 for details. uto switch mounting type Rail mounting B Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Solid state auto switch Reed auto switch Indicator light Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 32 Direct Mount Direct Mount, Non-rotating Rod R R RK RK uto Switch

38 Series K cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy ø1: ±1.5, ø16: ±1 Can operate without lubrication. Symbol Double acting, Single rod, Rubber bumper Symbol (For details, refer to pages 87 to 95.) Specifications -X Change of rod end shape -XC3 Special port location -XC9 djustable stroke cylinder/djustable retraction type -XC1 Dual stroke cylinder/double rod type -XC22 Fluororubber seal -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Precautions Refer to page 96 before handling. Specifications No freezing Bore size 1 16 ction Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication Stroke length tolerance Double acting, Single rod Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Mounted on the product. Please order separately. Mounting Basic Foot Flange Double Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint Rod end cap (Flat/Round type) T-bracket pin and retaining rings are shipped together with double clevis and double knuckle joint. ir 1 MPa.7 MPa.6 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper Not required (Non-lube) +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Strokes Bore size Option stroke 1 15, 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 Mounting and ccessories/for details, refer to page 12. Mounting Brackets/Part No. Bore size Mounting bracket 1 16 Foot CJ-L16C CJK-L16C Flange CJ-F16C CJK-F16C T-bracket CJ-T1C CJ-T16C T-bracket is used with double clevis (D). Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 33

39 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Weights [g] Bore size 1 16 Basic Basic weight xial piping (When the stroke Double clevis (including clevis pin) is zero) Head-side bossed 29 5 dditional weight per 15 mm of stroke 4 7 Mounting bracket weight ccessories Single foot 8 25 Double foot 16 5 Rod fl ange 5 13 Head fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 Mounting nut and rod end nut are included in the basic weight. Note) Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) KL1-45 Basic weight 25 (ø1) dditional weight 4/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) /15 x = 45 g Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod W K K Construction (Not able to disassemble)!4!3 i q! e r y o t!2 u w!5 Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane 8 Rod seal R!1 Rod section CDJ2KB1/16- -B No. Description Material Note 9 Piston seal R 1 Tube gasket R 11 Piston gasket R 12 Wear ring Resin 13 Mounting nut Rolled steel inc chromated 14 Rolled steel inc chromated 15 Magnet Direct Mount Direct Mount, Non-rotating Rod R R RK uto Switch RK 34

40 Series K Basic (B) KB Bore size Stroke Head cover port location Piping port M5 x.8 øndh8 Head cover port location xial location (R) Section Y detail Y The overall cylinder length does not change. B NN G Piping port 2 x M5 x.8 GB BB BB H F N + Stroke K Rod section B B Refer to page 12 for details of the mounting nut. (SNJ-16B for ø1, SNKJ-16B for ø16) Bore size B BB C CB F G GB H K N NDh8 NN S M4 x M1 x M5 x M12 x Double-side Bossed (E) KE Bore size Stroke øndh8 øndh8 Section Y detail Y NN G Piping port 2 x M5 x.8 GB YY NN Section YY detail B H F N + Stroke F K Rod section B Refer to page 12 for details of the mounting nut. (SNJ-16B for ø1, SNKJ-16B for ø16) Bore size B C F G GB H K N NDh8 NN S M4 x M1 x M5 x M12 x

41 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Double Clevis (D) KD Bore size Stroke BB B CX BB Single Foot (L) B H View E F G NN N G N Piping port 2 x M5 x.8 + Stroke + Stroke KL Bore size Stroke Head cover port location BB BB LT X H Y N Piping port M5 x.8 K GB The overall cylinder length does not change. Piping port 2 x M5 x.8 GB + Stroke Head cover port location xial location (R) U B Rod section R DH9 +.3 Clevis pin (øcdd9.3.6) B View E K Rod section clevis pin and retaining rings are included. Bore size B BB C CB CD(cd) CX G GB H K N R S U M4 x M5 x LX L B B Cover surface LH LB LY 2 x ølc Mounting hole Refer to page 12 for details of the mounting nut. (SNJ-16B for ø1, SNKJ-16B for ø16) Bore size B BB C CB F G GB H K LB LC LH LT LX LY L N NN S X Y M4 x M1 x M5 x M12 x Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch 36

42 Series K Double Foot [m] KM Bore size Stroke 2 x ølc Mounting hole NN H F G Piping port 2 x M5 x.8 GB F NN Cover surface K LH LB LY LT X Y N L + Stroke Y LT X Rod section LX L Refer to page 12 for details of the mounting nut. (SNJ-16B for ø1, SNKJ-16B for ø16) Bore size F G GB H K LB LC LH LS LT LX LY L N NN S X Y M4 x M1 x M5 x M12 x Rod Flange (F) KF Bore size Stroke Head cover port location Piping port M5 x.8 View E NN G Piping port 2 x M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. GB 2 x øfc Mounting hole Cover surface BB B BB H F FT N + Stroke K B Rod section B View E FX F FB FY Refer to page 12 for details of the mounting nut. (SNJ-16B for ø1, SNKJ-16B for ø16) Bore size B BB C CB F FB FC FT FX FY F G GB H K N NN S M4 x M1 x M5 x M12 x

43 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Head Flange [g] KG Bore size Stroke Double cting, Single Rod Cover surface FB FY NN G Piping port 2 x M5 x.8 GB NN B Double cting, Double Rod W FX F 2 x øfc Mounting hole F N H + Stroke F FT K Rod section B Refer to page 12 for details of the mounting nut. (SNJ-16B for ø1, SNKJ-16B for ø16) Bore size B C F FB FC FT FX FY F G GB H K N NN S M4 x M1 x M5 x M12 x K RK K RK R R W Single cting, Spring Return/Extend Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Non-rotating Rod uto Switch Direct Mount, Non-rotating Rod 38

44 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K ø1, ø16 How to Order Cylinder standard stroke Refer to Strokes on page 4. K CDJ2K With auto switch L L S S ction S Single acting, Spring return T Single acting, Spring extend M9BW Refer to page 4 for details. B With auto switch (Built-in magnet) B E D L M F G Mounting Basic Double-side bossed Double clevis Single foot Double foot Rod fl ange Head fl ange Mounting bracket is shipped together with the product, but not assembled. Bore size 1 1 mm mm Head cover port location Perpendicular to axis R xial uto switch For applicable auto switches, refer to the table below. If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. For double clevis, the product is perpendicular to the cylinder axis. For double-side bossed, the product is perpendicular to the cylinder axis. Not applicable to single acting, spring extend (T). uto switch mounting type Rail mounting B Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) DC C None connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Solid state auto switch Reed auto switch Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 39 Indicator light Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide.

45 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy ø1: ±1.5, ø16: ±1 Can operate without lubrication. Spring extend Spring return Symbol Single acting, Spring return, Rubber bumper Single acting, Spring extend, Rubber bumper Symbol (For details, refer to pages 87 to 95.) Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Precautions Refer to page 96 before handling. Specifications No freezing Bore size 1 16 ction Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication Stroke length tolerance Mounted on the product. Please order separately. Mounting Basic Foot Flange Double Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint Rod end cap (Flat/Round type) T-bracket pin and retaining rings are shipped together with double clevis and double knuckle joint. T-bracket is used with double clevis (D). Single acting, Spring return/single acting, Spring extend ir 1 MPa.7 MPa.15 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper (standard equipment) Not required (Non-lube) +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Strokes Bore size stroke 1 15, 3, 45, , 3, 45, 6, 75, 1, 125, 15 Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Option Mounting Brackets/Part No. Mounting bracket Spring Reaction Force Spring with primary mounting load Bore size 1 16 Foot CJ-L16C CJK-L16C Flange CJ-F16C CJK-F16C T-bracket CJ-T1C CJ-T16C IN Bore size Spring reaction force (N) Primary Secondary When the spring is set in the cylinder Mounting and ccessories/for details, refer to page 12. Spring with secondary mounting load OUT When the spring is contracted by applying air Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch 4

46 Series K Weights Spring Return Basic weight Mounting bracket weight ccessories Bore size 1 16 Mounting Basic xial piping Double clevis (including clevis pin) Headside Basic bossed xial piping Double clevis (including clevis pin) Headside bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot 8 25 Double foot 16 5 Rod fl ange 5 13 Head fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 Mounting nut and rod end nut are included in the basic weight. Note) Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) KL1-45S Basic weight 48 (ø1) Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) = 56 g [g] Spring Extend Bore size 1 16 Basic weight Mounting bracket weight ccessories Mounting Basic xial piping Double clevis (including clevis pin) Headside Basic bossed xial piping Double clevis (including clevis pin) [g] Headside bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot 8 25 Double foot 16 5 Rod fl ange 5 13 Head fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 Mounting nut and rod end nut are included in the basic weight. Note) Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) KL1-45T Basic weight 44 (ø1) Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) = 52 g 41

47 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Construction (Not able to disassemble) Single acting, Spring return!5!4 r q!1 e!2 u y i t! o w!6 Double cting, Single Rod W!3 Rod section CDJ2KB1/ 16- S-B Single acting, Spring extend!5 r!4!7 q o u y i t!!1!2 e w!6 K K Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane 8 Piston seal R 9 Tube gasket R!3 Rod section CDJ2BK1/ 16- T-B No. Description Material Note 1 Wear ring Resin 11 Return spring Piano wire inc chromated 12 Spring seat luminium alloy 13 Piston gasket R 14 Mounting nut Rolled steel inc chromated 15 Rolled steel inc chromated 16 Magnet 17 Rod seal R uto Switch W R R RK RK Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount, Non-rotating Rod 42

48 Series K Single cting, Spring Return: Basic (B) KB Bore size Stroke S Head cover port location øndh8 Piping port M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. B Section Y detail NN Y GB Piping port M5 x.8 K BB B BB F N H + Stroke B For details of the mounting nut, refer to page 12. S Bore B BB C CB F GB H K N NDh8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x Single cting, Spring Return: Double-side Bossed (E) KE Bore size Stroke S øndh8 øndh8 Section Y detail B NN Y GB Piping port M5 x.8 YY NN Section YY detail K BB B BB F N H + Stroke F B For details of the mounting nut, refer to page 12. S Bore B BB C CB F GB H K N NDh8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x

49 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Return: Double Clevis (D) KD Bore size Stroke S BB BB BB BB B B CX View E F NN LT X H Y H N N + Stroke + Stroke + Stroke Single cting, Spring Return: Single Foot (L) KL Bore size Stroke S Head cover port location Piping port M5 x.8 Piping port M5 x.8 GB GB Head cover port location xial location (R) The overall cylinder length does not change. U Piping port M5 x.8 K R B DH9 +.3 Clevis pin (øcdd9.3.6) clevis pin and retaining rings are included. S Bore size B BB C CB CD CX GB H K N R U 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Bore size 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st For details of the mounting nut, refer to page 12. S Bore 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st K B View E B Cover surface 2 x ølc Mounting hole LX L B LH LB LY Bore size B BB C CB F GB H K LB LC LH LT LX LY L N NDh8 NN M4 x M1 x M5 x M12 x Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch

50 Series K Single cting, Spring Return: Double Foot (M) KM Bore size Stroke S 4 x ølc Mounting hole H NN F GB Piping port M5 x.8 F Cover surface K LH LB LY X Y N Y X L + Stroke LT For details of the mounting nut, refer to page 12. LS Bore F GB H LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st LT LX LY L K N NN M4 x M1 x M5 x M12 x 1. S Bore 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st LT LX L Single cting, Spring Return: Rod Flange (F) KF Bore size Stroke S Head cover port location View E NN GB Piping port M5 x.8 2 x øfc Mounting hole Cover surface BB B FB FY B BB H F FT N + Stroke K B View E FX F Piping port M5 x.8 Head cover port location xial location (R) For details of the mounting nut, refer to page 12. The overall cylinder length does not change. S Bore size B BB C CB F FB FC FT FX FY F GB H K N NDh8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x

51 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Return: Head Flange [g] KG Bore size Stroke S Double cting, Single Rod FX F Cover surface FB FY 2 x øfc Mounting hole NN F N H + Stroke GB F Piping port M5 x.8 FT K B B W For details of the mounting nut, refer to page 12. Bore size B C F FB FC FT FX FY F GB H K N NDh8 NN M4 x M1 x M5 x M12 x 1. S Bore 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st K uto Switch K RK W RK R R Double cting, Double Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Single cting, Spring Return/Extend Non-rotating Rod Direct Mount, Non-rotating Rod 46

52 Series K Single cting, Spring Extend: Basic (B) KB Bore size Stroke T øndh8 Section Y detail NN Y G Piping port M5 x.8 BB B BB H + Stroke F N + 2 x Stroke K B B For details of the mounting nut, refer to page 12. S Bore BBBCCB F G H K N NDh8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x Single cting, Spring Extend: Double-side Bossed (E) KE Bore size Stroke T øndh8 øndh8 Section Y detail NN Y G Piping port M5 x.8 Section YY detail YY NN BB B BB H + Stroke F N + 2 x Stroke F K B B For details of the mounting nut, refer to page 12. S Bore BBBCCB F G H K N NDh8 NN 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x

53 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Extend: Double Clevis (D) KD Bore size Stroke T BB B BB CX H + Stroke G N Piping port M5 x x Stroke + 2 x Stroke U R DH9 +.3 Clevis pin (øcdd9.3.6) K B B Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend W clevis pin and retaining rings are included. S Bore size B BB C CB CD CX G H K N R U 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Single cting, Spring Extend: Single Foot (L) KL Bore size Stroke T BB Bore size BB B 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st H + Stroke NN LT View E X 61 to 75 st F G Y 76 to 1 st N 11 to 125 st Piping port M5 x x Stroke 126 to 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st K 11 to 125 st For details of the mounting nut, refer to page 12. B 126 to 15 st B View E Cover surface LX L 2 x ølc Mounting hole LH LB LY Bore size B BB C CB F G H K LB LC LH LT LX LY L N NN M4 x M1 x M5 x M12 x 1. Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod K K W R R RK RK Bore size S X Y 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st uto Switch

54 Series K Single cting, Spring Extend: Double Foot (M) KM Bore size Stroke T 4 x ølc Mounting hole H + Stroke NN F G Piping port M5 x.8 F Cover surface K LH LB LY LT X Y N + 2 x Stroke L Y LT X LX L For details of the mounting nut, refer to page 12. LS Bore size F G H K LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to LT LX LY L N NN 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x 1. S Bore size 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to 16 to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st Single cting, Spring Extend: Rod Flange (F) KF Bore size Stroke T View E NN G Piping port M5 x.8 Cover surface BB B BB H + Stroke F FT N + 2 x Stroke K B B View E FX F FB FY 2 x øfc Mounting hole For details of the mounting nut, refer to page 12. Bore size B BB C CB F FB FC FT FX FY F G H K N NN M4 x M1 x M5 x M12 x 1. Bore size S X Y 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st

55 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Extend: Head Flange [g] KG Bore size Stroke T Double cting, Single Rod FX F Cover surface FB FY 2 x øfc Mounting hole H + Stroke NN G Piping port M5 x.8 F N + 2 x Stroke FT F K B B W For details of the mounting nut, refer to page 12. Bore size B C F FB FC FT FX FY F G H K N NN M4 x M1 x M5 x M12 x 1. Bore size S X Y 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st K uto Switch K RK W RK R R Double cting, Double Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Single cting, Spring Return/Extend Non-rotating Rod Direct Mount, Non-rotating Rod 5

56 ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series ø1, ø16 How to Order Bore size 1 1 mm mm Cylinder standard stroke Refer to Strokes on page 52. With auto switch With auto switch (Built-in magnet) CDJ2 Mounting L L B Basic E Double-side bossed D Double clevis L Single foot M Double foot F Rod fl ange G Head fl ange Mounting bracket is shipped together with the product, but not assembled Head cover port location Perpendicular to axis R xial For double clevis, the product is perpendicular to the cylinder axis. For double-side bossed, the product is perpendicular to the cylinder axis. M9BW uto switch For applicable auto switches, refer to the table below. If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. Number of auto switches 2 pcs. S 1 pc. n n pcs. B Refer to page 52 for details. uto switch mounting type Rail mounting B Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length (m) Wiring Pre-wired Band mounting Rail mounting None pplicable load entry (Output) DC C connector Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V, 12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V, 12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V, 12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V, 12 V H7NF F79F IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit (NPN equivalent) Yes Grommet 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Solid state auto switch Reed auto switch 51 Indicator light Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.)

57 ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series Space-saving air cylinder with speed controller built-in cylinder cover Symbol Double acting, Single rod, Rubber bumper (For details, refer to pages 87 to 95.) Symbol Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Precautions Refer to page 96 before handling. Specifications No freezing Bore size 1 16 ction Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication Stroke length tolerance Speed controller Double acting, Single rod Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) ir 1 MPa.7 MPa.6 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper Not required (Non-lube) +1. Built-in Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Strokes Option Bore size stroke 1 15, 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 Mounting and ccessories/for details, refer to page 12. Mounted on the product. Please order separately. Mounting Basic Foot Flange Double Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint Rod end cap (Flat/Round type) T-bracket pin and retaining rings are shipped together with double clevis and double knuckle joint. Mounting Brackets/Part No. Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount W K K W R R Bore size Mounting bracket 1 16 Foot CJ-L1C CJ-L16C Flange CJ-F1C CJ-F16C T-bracket CJ-T1C CJ-T16C T-bracket is used with double clevis (D). Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Direct Mount, Non-rotating Rod RK RK uto Switch 52

58 Series Weights Bore size 1 16 Basic Basic weight xial piping (When the stroke Double clevis (including clevis pin) 4 68 is zero) Head-side bossed dditional weight per 15 mm of stroke 4 7 Mounting bracket weight ccessories Single foot 8 25 Double foot 16 5 Rod flange 5 13 Head flange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 Mounting nut and rod end nut are included in the basic weight. Note) Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) L1-45 Basic weight 36 (ø1) dditional weight 4/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) /15 x = 56 g [g] Construction (Not able to disassemble)!7 o!1 r!!3 q!4!6 e i y!2 t!8 CDJ2B1/16- -B Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane 8 Bumper B Urethane 9 Cushion needle Carbon steel Electroless nickel plating 1 Mounting nut Rolled steel inc chromated 11 Rolled steel inc chromated No. Description Material Note 12 Piston seal R 13 Rod seal R 14 Check seal R 15 Check seal B R 16 Tube gasket R 17 Needle seal R 18 Wear ring Resin 19 Check seal sleeve luminium alloy 2 Retaining ring Carbon tool steel Phosphate coating 21 Magnet 53

59 ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series Basic (B) B Bore size Stroke Head cover port location Y NN ød G Piping port 2 x M5 x.8 GB WW Piping port M5 x.8 Double cting, Single Rod Double cting, Double Rod W B B øndh8 F N H Y NN ød W Section Y detail G F N H + Stroke For details of the mounting nut, refer to page 12. Bore size B C D F G GB H N NDh8 NN W WB WW S M4 x M8 x M5 x M1 x Double-side Bossed (E) E Bore size Stroke Piping port 2 x M5 x.8 øndh8 + Stroke Section Y detail WB GB B F YY NN B øndh8 Head cover port location xial location (R) The overall cylinder length does not change. B B øndh8 Section YY detail WW Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod K K W R R RK RK For details of the mounting nut, refer to page 12. W WB Bore size B C D F G GB H N NDh8 NN W WB WW S M4 x M8 x M5 x M1 x uto Switch

60 Series Double Clevis (D) D Bore size Stroke ød G Piping port 2 x M5 x.8 GB +.3 DH9 Clevis pin (dd9 ).3.6 WW C B C CX H F N + Stroke + Stroke U R B W WB clevis pin and retaining rings are included. Bore size B C CD CX C D G GB H N R U W WB WW S M4 x M5 x Single Foot (L) L Bore size Stroke Head cover port location Piping port M5 x.8 WW NN FG Piping port 2 x M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. GB Cover surface 2 x ølc Mounting hole B LH LB LY ød B LT X H Y N + Stroke LX L W For details of the mounting nut, refer to page 12. Bore size B C D F G GB H LB LC LH LT LX LY L N NN W WB WW S X Y M4 x M8 x M5 x M1 x WB 55

61 ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series Double Foot (M) M Bore size Stroke 4 x ølc Mounting hole Double cting, Single Rod WW NN ød FG Piping port 2 x M5 x.8 GB F NN Cover surface Double cting, Double Rod W B B LT X Y N Y H L + Stroke LT X LX L LH LB LY Single cting, Spring Return/Extend Non-rotating Rod K K B WW NN ød W For details of the mounting nut, refer to page 12. Bore size B C D F G GB H LB LC LH LS LT LX LY L N NN W WB WW S X Y M4 x M8 x M5 x M1 x Rod Flange (F) F Bore size Stroke Head cover port location G Piping port 2 x M5 x.8 WB GB Cover surface FB FY Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount W R R B H F FT N W For details of the mounting nut, refer to page Stroke WB FX F Piping port M5 x.8 Head cover port location xial location (R) The overall cylinder length does not change. 2 x øfc Mounting hole Bore size B C D F FB FC FT FX FY F G GB H N NN W WB WW S M4 x M8 x M5 x M1 x Direct Mount, Non-rotating Rod RK RK uto Switch

62 Series Head Flange [g] G Bore size Stroke Cover surface NN G Piping port 2 x M5 x.8 GB NN WW FB FY B ød FX F 2 x øfc Mounting hole H F N FT F + Stroke B W WB For details of the mounting nut, refer to page 12. Bore size B C D F FB FC FT FX FY F G GB H N NN W WB WW S M4 x M8 x M5 x M1 x

63 W B With auto switch CDJ2W L Built-in magnet ir Cylinder: Built-in Speed Controller Type Double cting, Double Rod Series W ø1, ø16 B L F Mounting Basic Foot Flange Mounting bracket is shipped together with the product, but not assembled. Bore size 1 1 mm mm How to Order stroke 6 6 uto switch Without auto switch For applicable auto switches, refer to the table below. M9BW B RoHS Refer to page 59 for details. uto switch mounting type B Rail mounting Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length (m) Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) None DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV M9P M9PV M9P (2-colour indication) 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit Solid state auto switch Indicator light 3-wire 5 V (NPN equivalent) 96V 96 96V 96 IC circuit Yes 2 V 72 72H Grommet 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Reed auto switch Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 58 Direct Mount Direct Mount, Non-rotating Rod R R RK RK uto Switch

64 Series W Space-saving air cylinder with speed controller built-in cylinder cover Specifications Bore size 1 16 ction Double acting, double rod Fluid ir Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication Stroke length tolerance Speed controller Piston speed 1 MPa.7 MPa.1 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper Not required (Non-lube) +1. Built-in 5 to 75 mm/s llowable kinetic energy.35 J.9 J No freezing Symbol Double acting, Double rod, Rubber bumper Strokes Bore size stroke 1 15, 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) (For details, refer to pages 87 and 95.) Mounting and ccessories /For details, refer to page 12. Mounted on the product. Please order separately. Symbol Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Precautions Refer to page 96 before handling. Mounting Basic Foot Flange Mounting nut Option Single knuckle joint Double knuckle joint knuckle pin and retaining rings are shipped together with double knuckle joint. Mounting Brackets/Part No. Mounting bracket Bore size 1 16 Foot CJ-L1C CJ-L16C Flange CJ-F1C CJ-F16C Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 59

65 ir Cylinder: Built-in Speed Controller Type Double cting, Double Rod Series W Weights [g] Bore size 1 16 Basic weight (When the stroke is zero) Basic dditional weight per 15 mm of stroke Mounting bracket Double foot 16 5 weight Head fl ange 5 13 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 Mounting nut and rod end nut are included in the basic weight. Calculation: Example) WL1-45 Basic weight 36 (ø1) dditional weight 4.5/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 16 (Double foot) /15 x = 65.5 g Construction (Not able to disassemble)!5 u o e i!1 q!2!3 w y t!!4 r Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W Component Parts!6 CDJ2WB1/16- -B No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Cylinder tube Stainless steel 3 Piston rod Stainless steel 4 Piston luminium alloy 5 Piston B luminium alloy 6 Bumper Urethane 7 Cushion needle Carbon steel Electroless nickel plating 8 Mounting nut Rolled steel inc chromated No. Description Material Note 9 Rolled steel inc chromated 1 Piston seal R 11 Rod seal R 12 Check seal R 13 Tube gasket R 14 Piston gasket R 15 Needle seal R 16 Magnet Direct Mount Direct Mount, Non-rotating Rod R R RK RK uto Switch 6

66 Series W Basic (B) WB Bore size Stroke øndh8 NN Y G Piping port 2 x M5 x.8 WW B ød Section Y detail F N N F H H + Stroke + 2 x Stroke B W W For details of the mounting nut, refer to page 12. Bore size B C D F G H N NDh8 NN W WW S M4 x M8 x M5 x M1 x Foot (L) WL Bore size Stroke 2 x ølc Mounting hole WW NN FG Piping port 2 x M5 x.8 G Cover surface B LT LH LB LY ød B LT X H Y N + 2 x Stroke N Y X H + Stroke LX L W W For details of the mounting nut, refer to page 12. Bore size B C D F G H LB LC LH LT LX LY L NN N NN W WW S X Y M4 x.7 21 M8 x M5 x.8 21 M1 x

67 ir Cylinder: Built-in Speed Controller Type Double cting, Double Rod Series W Flange (F) WF Bore size Stroke Double cting, Single Rod WW NN ød G Piping port 2 x M5 x.8 2 x øfc Mounting hole Cover surface W B B H F FT N W + 2 x Stroke N W F H + Stroke FX F FB FY K K For details of the mounting nut, refer to page 12. Bore size B C D F FB FC FT FX FY F G H N NN W WW S M4 x.7 21 M8 x M5 x.8 21 M1 x uto Switch RK W RK R R Double cting, Double Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Single cting, Spring Return/Extend Non-rotating Rod Direct Mount, Non-rotating Rod 62

68 ir Cylinder: Direct Mount Type Double cting, Single Rod Series R ø1, ø16 How to Order Cylinder standard stroke Refer to Strokes on page 64. R 16 6 With auto switch CDJ2R 16 6 M9BW B With auto switch (Built-in magnet) Mounting Bottom mounting style Bore size 1 1 mm mm uto switch For applicable auto switches, refer to the table below. If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. Head cover port location Perpendicular to axis uto switch mounting type B Refer to page 64 for details. Rail mounting Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. R xial Number of auto switches 2 pcs. S 1 pc. n n pcs. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V, 12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V, 12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V, 12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V, 12 V H7NF F79F IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Solid state auto switch Reed auto switch Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 63 Indicator light Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide.

69 ir Cylinder: Direct Mount Type Double cting, Single Rod Series R The R direct mount cylinder can be installed directly through the use of a square rod cover. Symbol Double acting, Single rod, Rubber bumper Symbol (For details, refer to pages 87 to 95.) Specifications -X Change of rod end shape -XC9 djustable stroke cylinder/djustable retraction type -XC22 Fluororubber seal -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Precautions Refer to page 96 before handling. Specifications No freezing Bore size 1 16 ction Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication Stroke length tolerance Double acting, Single rod ir 1 MPa.7 MPa.6 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper Not required (Non-lube) +1. Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Strokes Bore size stroke 1 15, 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) ccessories/for details, refer to page 12. Option Single knuckle joint, Double knuckle joint, Rod end cap (Flat/Round type) knuckle pin and retaining rings are shipped together with double knuckle joint. Please order separately. Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Weights Bore size 1 16 Basic weight Basic (When the stroke is zero) xial piping dditional weight per 15 mm of stroke 4 7 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 Mounting nut and rod end nut are included in the basic weight. Calculation: Example) R1-45 Basic weight 36 (ø1) dditional weight 4/15 stroke Cylinder stroke 45 stroke /15 x 45 = 48 g [g] 64 Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch

70 Series R Clean Series 1-R Bore size Stroke Head cover port location Clean Series ir cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator s rod section having a double seal construction. Specifications ction Double acting, Single rod Bore size 1, 16 Maximum operating pressure.7 MPa Minimum operating pressure.8 MPa Cushion Rubber bumper stroke Same as standard type. (Refer to page 64.) uto switch Mountable (Band mounting type) Mounting Bottom mounting style For the detailed specifications, refer to 1-R (Clean Series) Construction (Not able to disassemble) 65

71 ir Cylinder: Direct Mount Type Double cting, Single Rod Series R Construction (Not able to disassemble)!2 i q! e r y o t!1 u w Double cting, Single Rod Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane Bottom Mounting Style!3 CDJ2R1/16- -B No. Description Material Note 8 Rod seal R 9 Piston seal R 1 Tube gasket R 11 Wear ring Resin 12 Rolled steel inc chromated 13 Magnet Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W R Bore size Stroke Head cover port location B X ød G Y Piping port 2 x M5 x.8 GB 2 x øld LX L Piping port Direct Mount R R B Head cover shape H N + Stroke LH LB Head cover port location xial location (R) The overall cylinder length does not change. Bore size B C D G GB H L LB LD LH LX N X Y S ø3.5 through, ø6.5 counterbore depth M4 x ø4.5 through, ø8 counterbore depth M5 x Direct Mount, Non-rotating Rod RK RK uto Switch 66

72 ir Cylinder: Direct Mount Type Single cting, Spring Return/Extend Series R ø1, ø16 How to Order Cylinder standard stroke Refer to Strokes on page 68. ction S Single acting, Spring return T Single acting, Spring extend R S With auto switch CDJ2R S M9BW B With auto switch (Built-in magnet) Mounting Bottom mounting style Bore size 1 1 mm mm Head cover port location Perpendicular to axis R uto switch For applicable auto switches, refer to the table below. If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. xial Not applicable to single acting, spring extend (T). Refer to page 68 for details. uto switch mounting type Rail mounting B Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Solid state auto switch Reed auto switch Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 67 Indicator light Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide.

73 ir Cylinder: Direct Mount Type Single cting, Spring Return/Extend Series R The R direct mount cylinder can be installed directly through the use of a square rod cover. Symbol Single acting, Spring return, Rubber bumper Single acting, Spring extend, Rubber bumper (For details, refer to pages 87 to 95.) Symbol Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Precautions Refer to page 96 before handling. Specifications ction No freezing Bore size stroke 1 15, 3, 45, , 3, 45, 6, 75, 1, 125, 15 Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) ccessories /For details, refer to page 12. knuckle pin and retaining rings are shipped together with double knuckle joint. Please order separately. Spring with primary mounting load IN When the spring is set in the cylinder Bore size 1 16 Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication Stroke length tolerance Spring with secondary mounting load OUT When the spring is contracted by applying air Single acting, Spring return/single acting, Spring extend ir 1 MPa.7 MPa.15 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper Not required (Non-lube) +1. Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Strokes equipment Option Single knuckle joint, Double knuckle joint, Rod end cap (Flat type, Round type) Spring Reaction Force Bore size Spring reaction force [N] Primary Secondary Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch 68

74 Series R Weights Spring Return Bore size 1 16 Mounting Basic xial Basic xial 15 stroke stroke stroke Basic 6 stroke weight 75 stroke stroke stroke stroke Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 is included in the basic weight. [g] Spring Extend Bore size 1 16 Mounting Basic Basic 15 stroke stroke stroke Basic 6 stroke weight 75 stroke stroke stroke stroke 228 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 [g] Construction (Not able to disassemble) R - S CDJ2R1/16- S-B R - T CDJ2R1/16- T-B Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane 8 Piston seal R No. Description Material Note 9 Tube gasket R 1 Wear ring Resin 11 Return spring Piano wire inc chromated 12 Spring seat luminium alloy 13 Rolled steel inc chromated 14 Magnet 15 Rod seal R 69

75 ir Cylinder: Direct Mount Type Single cting, Spring Return/Extend Series R Single cting: Bottom Mounting Style Spring return: R Bore size Stroke S Head cover port location Double cting, Single Rod B B Head cover shape H X ød Y N Breather hole Piping port M5 x.8 + Stroke GB LH LB 2 x øld LX L Piping port Head cover port location xial location (R) The overall cylinder length does not change. Bore size B C D GB H L LB LD LH LX N X Y ø3.5 through, ø6.5 counterbore depth M4 x ø4.5 through, ø8 counterbore depth M5 x Dimensions by Stroke: Spring Return Bore size S 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st Spring extend: R Bore size Stroke T Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W B B Head cover shape X + Stroke ød H + Stroke G Y N + 2 x Stroke Piping port M5 x.8 Breather hole LH LB LX L 2 x øld Bore size B C D G H L LB LD LH LX N X Y ø3.5 through, ø6.5 counterbore depth M4 x ø4.5 through, ø8 counterbore depth M5 x Dimensions by Stroke: Spring Extend Bore size S 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st Direct Mount Direct Mount, Non-rotating Rod R R RK RK uto Switch 7

76 ir Cylinder: Direct Mount, Non-rotating Rod Type Double cting, Single Rod Series RK ø1, ø16 Cylinder standard stroke Refer to Strokes on page 72. How to Order With auto switch RK CDJ2RK With auto switch (Built-in magnet) Mounting Bottom mounting style Bore size 1 1 mm mm 6 6 Head cover port location Perpendicular to axis R uto switch For applicable auto switches, refer to the table below. xial M9BW If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. B Refer to page 72 for details. uto switch mounting type Rail mounting B Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit Solid state auto switch Reed auto switch Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 71 Indicator light 3-wire Grommet Yes (NPN equivalent) 5 V 96V 96 96V 96 IC circuit 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide.

77 ir Cylinder: Direct Mount, Non-rotating Rod Type Double cting, Single Rod Series RK cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy ø1: ±1.5, ø16: ±1 Symbol Double acting, Single rod, Rubber bumper Symbol (For details, refer to pages 87 to 95.) Specifi cations -X Change of rod end shape -XC9 djustable stroke cylinder/djustable retraction type -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Precautions Refer to page 96 before handling. Specifications Bore size 1 16 ction Double acting, Single rod Fluid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.6 MPa mbient and fluid temperature Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Cushion Lubrication Stroke length tolerance No freezing Bore size Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) knuckle pin and retaining rings are shipped together with double knuckle joint. Please order separately. is included in the basic weight. Calculation: Example) RK1-45 Basic weight 36 (ø1) dditional weight 4/15 stroke Cylinder stroke 45 stroke /15 x 45 = 48 g stroke 1 15, 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 Option Rubber bumper Not required (Non-lube) +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Strokes ccessories/for details, refer to page 12. Single knuckle joint, Double knuckle joint, Rod end cap (Flat/Round type) Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Weights Bore size 1 16 Basic weight Basic (When the stroke is zero) xial piping dditional weight per 15 mm of stroke 4 7 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 [g] 72 Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch

78 Series RK Construction (Not able to disassemble)!3 i q! e r u y ot!1 w!4!2 CDJ2RK1, 16- -B Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane No. Description Material Note 8 Rod seal R 9 Piston seal R 1 Tube gasket R 11 Wear ring Resin 12 Piston gasket R 13 Rolled steel inc chromated 14 Magnet Bottom Mounting Style RK Bore size Stroke Head cover port location X G Y Piping port 2 x M5 x.8 GB B LX L B Head cover shape H N K Rod section LH LB 2 x øld + Stroke Piping port Head cover port location xial location (R) The overall cylinder length does not change. Bore size B C G GB H K L LB LD LH LX N X Y S ø3.5 through, ø6.5 counterbore depth M4 x ø4.5 through, ø8 counterbore depth M5 x

79 ir Cylinder: Direct Mount, Non-rotating Rod Type Single cting, Spring Return/Extend Series RK ø1, ø16 Double cting, Single Rod With auto switch With auto switch (Built-in magnet) Cylinder standard stroke Refer to Strokes on page 75. RK CDJ2RK Mounting Bottom mounting style Bore size 1 1 mm mm How to Order S S Perpendicular to axis R ction S Single acting, Spring return T Single acting, Spring extend xial uto switch For applicable auto switches, refer to the table below. Head cover port location Not applicable to single acting, spring extend (T). M9BW If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. Number of auto switches 2 pcs. S 1 pc. n n pcs. B Refer to page 75 for details. uto switch mounting type Rail mounting B Band mounting For rail mounting, screws and nuts for 2 auto switches come with the rail. Refer to page 84 for auto switch mounting brackets. Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) [m] (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector H7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indication) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV Water resistant 5 V,12 V M9N M9NV M9N IC circuit 3-wire (PNP) M9PV (2-colour indication) M9P M9PV M9P 2-wire 12 V M9BV M9B M9BV M9B With diagnostic output (2-colour indication) 4-wire (NPN) 5 V,12 V H7NF F79F IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V 72 72H 1 V 93V 93 93V 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indication) Grommet Yes 79W Solid state auto switch Reed auto switch Indicator light Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) H7CN Since there are other applicable auto switches than listed, refer to page 85 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. Solid state auto switches marked with are produced upon receipt of order. The D-9 /M9 /7 /8 /F7 /J7 auto switches are shipped together, (but not assembled). (For band mounting, only auto switch mounting brackets are assembled before being shipped.) 74 Direct Mount Direct Mount, Non-rotating Rod R R RK RK uto Switch

80 Series RK cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy ø1: ±1.5, ø16: ±1 Can operate without lubrication. Specifications Bore size 1 16 ction Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication Stroke length tolerance Single acting, Spring return/single acting, Spring extend ir 1 MPa.7 MPa.15 MPa Without auto switch: 1 C to 7 C, With auto switch: 1 C to 6 C Rubber bumper Not required (Non-lube) +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J No freezing Symbol Single acting, Spring return, Rubber bumper Single acting, Spring extend, Rubber bumper Strokes Bore size stroke 1 15, 3, 45, , 3, 45, 6, 75, 1, 125, 15 Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) ccessories/for details, refer to page 12. Symbol (For details, refer to pages 87 to 95.) Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTFE grease Precautions Refer to page 96 before handling. Option Single knuckle joint, Double knuckle joint, Rod end cap (Flat/Round type) knuckle pin and retaining rings are shipped together with double knuckle joint. Please order separately. Spring Reaction Force Bore size Spring reaction force [N] Primary Secondary Spring with primary mounting load IN Spring with secondary mounting load OUT When the spring is set in the cylinder When the spring is contracted by applying air Refer to pages 78 to 85 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 75

81 ir Cylinder: Direct Mount, Non-rotating Rod Type Single cting, Spring Return/Extend Series RK Weights Spring Return Basic weight Bore size 1 16 Mounting Basic xial Basic xial 15 stroke stroke stroke stroke stroke stroke stroke stroke Single knuckle joint [g] Spring Extend Bore size 1 16 Basic weight Mounting Basic Basic 15 stroke stroke stroke stroke stroke stroke stroke stroke 234 Single knuckle joint [g] Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend W ccessories Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 is included in the basic weight. ccessories Double knuckle joint (including knuckle pin) Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 Non-rotating Rod K K Construction (Not able to disassemble) Single acting, Spring return!4 r q!1 e!2 u y i t! o w!5 Single acting, Spring extend!4 r!6 q o u y i t!!1!2 e w!5!3 Rod section CDJ2RK1/16- S-B Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W R R Component Parts No. Description Material Note 1 Rod cover luminium alloy Clear hard nodised 2 Head cover luminium alloy Clear hard nodised 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Bumper Urethane 8 Piston seal R!3 Rod section CDJ2RK1/16- T-B No. Description Material Note 9 Tube gasket R 1 Wear ring Resin 11 Return spring Piano wire inc chromated 12 Spring seat luminium alloy 13 Piston gasket R 14 Rolled steel inc chromated 15 Magnet 16 Rod seal R 76 Direct Mount, Non-rotating Rod RK RK uto Switch

82 Series RK Single cting: Bottom Mounting Style Spring return: RK Bore size Stroke S Head cover port location X Y Breather hole GB Piping port M5 x.8 2 x LD Piping port B B Head cover shape N H + Stroke K Rod section LH LB LX L Head cover port location xial location (R) The overall cylinder length does not change. Bore size B C GB H K L LB LD LH LX N X Y ø3.5 through, ø6.5 counterbore depth M4 x ø4.5 through, ø8 counterbore depth M5 x Dimensions by Stroke: Spring Return Bore size S 5 to to 3 31 to to 6 61 to to 1 11 to to 15 5 to to 3 31 to to 6 61 to to 1 11 to to Spring extend: RK Bore size Stroke T X + Stroke G Y Piping port M5 x.8 Breather hole B K LX L B Head cover shape H + Stroke N + 2 x Stroke Rod section LH LB 2 x LD Bore size B C G H K L LB LD LH LX N X Y ø3.5 through, ø6.5 counterbore depth M4 x ø4.5 through, ø8 counterbore depth M5 x Dimensions by Stroke: Spring Extend (Dimensions not mentioned in the below table are the same as the above table.) Bore size S 5 to to 3 31 to to 6 61 to to 1 11 to to 15 5 to to 3 31 to to 6 61 to to 1 11 to to

83 Series uto Switch Mounting uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting Height Solid state auto switch <Band mounting> D-M9 D-M9 W D-M9 uto switch Hs 16.5 Reed auto switch <Band mounting> D-9 uto switch Hs 16.5 Double cting, Single Rod W D-M9 V D-M9 MV D-M9 V D-H7 D-H7 W D-H7B D-H7NF D-H7C 22 (24) ( ): Dimension of the D-M9. and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. uto switch B Hs (22) B ( ): Dimension of the D-M9 V. and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. uto switch B Hs 16.5 D-9 V D-C7 /C8 D-C73C /C8C 24.5 (22) B 22 B ( ): Dimension of the D-96. and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. uto switch uto switch B Hs Hs 16.5 and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. uto Switch 16.5 K K W R R RK RK Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod 78

84 Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting Height <Rail mounting> D-M9 D-M9 W D-M9 uto switch <Rail mounting> D-9 uto switch D-M9 V D-M9 WV D-M9 V 23.5 (25.5) uto switch B uto switch Hs Hs Hs B (23.5) ( ): Dimension of the D-M9. ( ): Dimension of the D-96. D-9 V Hs 21.5 (23.5) B B ( ): Dimension of the D-M9 V. D-F7 /J79 D-F7 W/J79W D-F79F/F7B uto switch D-7 /8 D-73C/8C D-79W uto switch B Hs B Hs D-F7 V/F7 WV D-F7BV D-J79C uto switch D-7 H/8H uto switch B Hs B Hs 79

85 uto Switch Mounting Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting Height uto Switch Proper Mounting Position uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V Bore size B B B B 1 (5) 6 (5) 6 (1) 2 (1) (5.5) 6.5 (5.5) 6.5 (1.5) 2.5 (1.5) The values in ( ) are measured from the end of the auto switch mounting bracket. uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V djust the auto switch after confirming the operating condition in the actual setting. uto Switch Mounting Height D-9 D-9 V D-9 D-9 V Band mounting D-C7 D-C8 D-C73C D-C8C D-7 D-8 Rail mounting D-H7 D-H7C D-H7NF D-H7 W D-H7B Bore size B B B B B B uto switch model D-M9 D-M9 W D-M9 D-9 D-M9 V D-M9 WV D-M9 V D-9 V D-C7 /C8 D-H7 /H7 W D-H7NF D-H7B Band mounting D-7 H/8H D-73C/8C D-F7 /J79 D-F7 W/J79W D-F7 V/F7 WV D-F79F D-J79C D-F7B D-F7BV D-C73C D-C8C D-F7NT D-79W Bore size Hs Hs Hs Hs Hs Hs uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V D-9 D-9 V D-7 H/8H D-F7 /J79 D-F7 W/J79W D-F7B/F79F D-F7NT D-73C D-8C Rail mounting D-F7 V D-F7 WV D-F7BV D-H7C D-J79C Bore size Hs Hs Hs Hs Hs Hs D-7 D-8 D-79W Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch 8

86 Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting Height/Single cting, Spring Return Type (S) uto Switch Proper Mounting Position: Spring Return Type (S) Type (CDJ2 - S) Non-rotating Rod Type (CDJ2K - S) Direct Mount Type (CDJ2R - S) Direct Mount, Non-Rotating Rod Type (CDJ2RK - S) Band mounting Rail mounting uto switch model D-9 D-M9 D-M9 W D-C7 /C8 D-C73C D-C8C D-H7 /H7C D-H7 W/H7B D-H7NF D-9 D-9 V D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-7 /8 D-7 H/8H D-73C/8C D-F7 /J79 D-F7 W/J79W D-F7 V/F7 WV D-F79F/J79C D-F7B D-F7BV D-F7NT D-79W Bore size dimensions 1 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st In the actual setting, adjust them after confirming the auto switch performance. B 81

87 uto Switch Mounting Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting Height/Single cting, Spring Extend Type (T) uto Switch Proper Mounting Position: Spring Extend Type (T) Type (CDJ2 - T) Non-rotating Rod Type (CDJ2K - T) Direct Mount Type (CDJ2R - T) Direct Mount, Non-rotating Rod Type (CDJ2RK - T) Band mounting Rail mounting uto switch model D-9 D-M9 D-M9 W D-C7 /C8 D-C73C D-C8C D-H7 /H7C D-H7 W/H7B D-H7NF D-9 D-9 V D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-7 /8 D-7 H/8H D-73C/8C D-F7 /J79 D-F7 W/J79W D-F7 V/F7 WV D-F79F/J79C D-F7B D-F7BV D-F7NT D-79W Bore size In the actual setting, adjust them after confirming the auto switch performance. B dimensions 1 to 15 st 16 to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st Double cting, Single Rod W K K uto Switch W R R RK RK Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount, Non-rotating Rod 82

88 Series Minimum Stroke for uto Switch Mounting uto switch mounting Band mounting Rail mounting Note 1) uto switch mounting uto switch model D-M9 D-M9 W D-M9 D-9 With 1 pc. Number of auto switches With 2 pcs. With n pcs. (n: Number of auto switches) Different surfaces Same surface Different surfaces Same surface (n 2) 1 15 Note 1) 45 Note 1) (n 2) 2 (n = 2, 4, 6 ) Note 3) (n = 2, 3, 4, 5 ) D-M9 V 5 15 Note 1) 35 D-M9 WV D-M9 V 1 15 Note 1) 35 D-9 V D-C7 D-C8 D-H7 /H7 W D-H7B D-H7NF D-C73C D-C8C D-H7C D-M9 V 5 5 D-9 V 5 1 D-M9 D-9 D-M9 WV D-M9 V D-M9 W D-M D-7 /8 D-7 H/8H D-73C/8C D-7 H D-8H D-79W 1 15 D-F7 D-J79 D-F7 V D-J79C D-F7 W/J79W D-F7B/F79F/F7NT D-F7 WV D-F7BV (n 2) (n 2) 2 (n = 2, 4, 6 ) Note 3) (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) Note 3) (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) Note 3) (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) Note 3) (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) Note 3) (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) Note 3) (n = 2, 3, 4, 5 ) Note 3) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. Note 4) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. However, the minimum even number is 4. So, 4 is used for the calculation when n is 1 to 3. With 2 auto switches Different surfaces Note 1) Same surface Note 1) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) (n 2) (n = 4, 6 ) Note 4) 83 uto switch model uto switch D-M9 (V) B D-M9 W(V) D-M9 (V) The proper auto switch mounting position is 5.5 mm inward from the switch holder edge. The above and B indicate values for band mounting in the table of page 8. The auto switch is mounted by slightly displacing it in a direction (cylinder tube circumferential exterior) so that the auto switch and lead wire do not interfere with each other. D-M9 /M/9 W/M9 Less than 2 stroke Note 2) Less than 55 stroke Note 2) D-9/93 Less than 5 stroke Note 2) Note 2) Minimum stroke for auto switch mounting in styles other than those mentioned in Note 1.

89 uto Switch Mounting Series Operating Range Band mounting Rail mounting uto switch model D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V Bore size D D-C7 /C8/C73C/C8C 7 7 D-H7 /H7 W D-H7B/H7NF 4 4 D-H7C 8 9 D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-9 /9 V D-7 /8/7H/8H D-73C/8C 8 9 D-79W D-F7 /J79/F7 W/J79W D-F7 V/F7 WV/F79F D-J79C/F7B/F7BV D-F7NT 5 5 Values which include hysteresis are for guideline purposes only, they are not a guarantee (assuming approximately ±3% dispersion) and may change substantially depending on the ambient environment. uto Switch Mounting Brackets/Part No. uto switch mounting Band mounting Band mounting Note 4) Rail mounting Switch bracket (Resin) c Transparent (Nylon) Note 1) e White (PBT) d Switch holder (inc die-casted) BQ2-12 BQ2-12S a uto switch mounting bracket b uto switch mounting screw a uto switch mounting band Nut (Cylinder accessory) Set screw (ccessory) b uto switch mounting screw Note 1) Since the switch bracket (made from nylon) are affected in an environment where alcohol, chloroform, methylamines, hydrochloric acid or sulfuric acid is splashed over, so it cannot be used. Please contact SMC regarding other chemicals. Note 2) void the indicator LED for mounting the switch bracket. s the indicator LED is projected from the switch unit, indicator LED may be damaged if the switch bracket is fi xed on the indicator LED. Note 3) When the cylinder is shipped, the auto switch mounting bracket and the auto switch will be included. Note 4) For D-M9 (V), order the BQ2-12S, which uses stainless steel mounting screws. Band Mounting Brackets Set Part No. Set part no. Contents BJ2- BJ4-1 BJ5-1 uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-9 D-9 V D-M9 Note 2) BJ6-1S D-M9 V Note 2) D-C7 /C8 D-C73C/C8C D-H7 /H7 W D-H7B/H7NF D-M9 D-M9 V D-M9 W D-M9 WV D-M9 Note 5) Note 5) D-M9 V D-9 D-9 V uto switch mounting band (a) uto switch mounting screw (b) Switch bracket (White/PBT) (e) Switch holder (d) Switch bracket (Transparent/Nylon) (c) Switch holder (d) Bore size 1 16 BJ6-1 ( set of a, b, c, d) ( set of a, b, d, e) BJ2-1 ( set of band and screw) BQ2-12 (S) ( set of a and b) BJ6-16 ( set of a, b, c, d) BJ6-16S ( set of a, b, d, e) BJ2-16 ( set of band and screw) BQ2-12 (S) ( set of a and b) Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK [Stainless Steel Mounting Screw] The following stainless steel mounting screw kit is available. Use it in accordance with the operating environment. (Since the auto switch mounting bracket is not included, order it separately.) BB4: For D-C7/C8/H7 types Note 5) Refer to the uto Switch Guide for details on the BB4. When the D-H7B type auto switch is shipped independently, the BB4 is attached. 84 uto Switch

90 Series Other than the applicable auto switches listed in How to Order, the following auto switches are mountable. Refer to the uto Switch Guide for the detailed specifications. Type Mounting Model Electrical entry Features Sold state Reed Band mounting Rail mounting Band mounting Rail mounting D-H71/H72/H7B D-H7NW/H7PW/H7BW Diagnostic indication (2-colour indication) Grommet (In-line) D-F79/F7P/J79 D-F79W/F7PW/J79W Diagnostic indication (2-colour indication) D-F7NV/F7PV/F7BV Grommet (Perpendicular) D-F7NWV/F7BWV Diagnostic indication (2-colour indication) D-C73/C76 D-C8 Without indicator light Grommet (In-line) D-73H/76H D-8H Without indicator light D-73 Grommet (Perpendicular) D-8 Without indicator light With pre-wired connector is also available for solid state auto switches. For details, refer to the uto Switch Guide. Normally closed (NC = b contact) solid state auto switches (D-F9G/F9H) are also available. For details, refer to the uto Switch Guide. 85

91 uto switch 1 uto switch 2 uto switch 1 uto switch 2 uto switch 1 uto switch 2 uto switch uto switch Brown Black Blue Brown Black Blue Brown Black Blue Brown Black Blue Brown Blue Brown Blue Prior to Use uto Switch Connection and Example Sink Input Specifications 3-wire, NPN 2-wire Brown Black Load Blue Brown Blue Input COM Input COM Relay Relay Load Load uto switch 1 uto switch 2 uto switch 2 Black Load (Performed with auto switches only) Brown uto switch 1 uto switch 1 uto switch 2 Brown Blue Brown Black Blue Black Blue Brown Black Load Blue Brown Blue Brown Blue uto switch uto switch Connect according to the applicable PLC input specifications, as the connection method will vary depending on the PLC input specifi cations. When using solid state auto switches, ensure the application is set up so the signals for the fi rst 5 ms are invalid. When two auto switches are connected in series, a load may malfunction because the load voltage will decline when in the ON state. The indicator lights will light up when both of the auto switches are in the ON state. uto switches with load voltage less than 2 V cannot be used. Load voltage at ON = Power supply voltage Residual voltage x 2 pcs. = 24 V 4 V x 2 pcs. = 16 V Example: Power supply is 24 VDC Internal voltage drop in auto switch is 4 V. (PLC internal circuit) (PLC internal circuit) 3-wire, PNP 2-wire Example of ND (Series) and OR (Parallel) Connection 3-wire ND connection for NPN output (Using relays) 3-wire ND connection for PNP output (Using relays) 2-wire ND connection Source Input Specifications (Performed with auto switches only) 2-wire OR connection Load Brown Black Blue Brown Blue Input COM COM Input uto switch 1 uto switch 2 uto switch 1 uto switch 2 (Solid state) When two auto switches are connected in parallel, malfunction may occur because the load voltage will increase when in the OFF state. Load voltage at OFF = Leakage current x 2 pcs. x Load impedance = 1 m x 2 pcs. x 3 kω = 6 V Example: Load impedance is 3 kω. Leakage current from auto switch is 1 m. (PLC internal circuit) (PLC internal circuit) 3-wire OR connection for NPN output Brown Black Blue Brown Black Blue Brown Black Blue Brown Black Blue Load 3-wire OR connection for PNP output Load (Reed) Because there is no current leakage, the load voltage will not increase when turned OFF. However, depending on the number of auto switches in the ON state, the indicator lights may sometimes grow dim or not light up, due to the dispersion and reduction of the current fl owing to the auto switches. 86 Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod W K K W R R RK RK uto Switch

92 Series Simple Specials/ Please contact SMC for detailed specifi cations, delivery and prices. Simple Specials Symbol The following special specifi cations can be ordered as a simplifi ed Made-to-Order. There is a specifi cation sheet available on paper and CD-ROM. Please contact your SMC sales representatives if necessary. K ( type) (Non-rotating rod type) Specifications Double acting Single acting Double acting Single acting Single rod Double rod Single rod Single rod (spring return) (spring extend) Single rod Single rod Single rod (spring return) (spring extend) -X to 3 Change of rod end shape Symbol Specifications -XB6 Heat resistant cylinder ( 1 to 15 C) ( type) Double acting Single acting Single Double Single rod Single rod rod rod (spring return) (spring extend) K (Non-rotating rod type) Double acting Single acting Single Single rod Single rod rod (spring return) (spring extend) -XB7 -XB9 -XC3 -XC8 -XC9 -XC1 -XC11 -XC22 -XC51 -XC85 -X446 Cold resistant cylinder ( 4 to 7 C) Low speed cylinder (1 to 5 mm/s) Special port position djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Fluororubber seal With hose nipple Grease for food processing equipment PTFE grease 87

93 Simple Specials/ Series (Built-in speed controller type) Double acting Single rod Double rod R (Direct mount type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) RK (Direct mount, Non-rotating rod type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) Page Page 89 Double cting, Single Rod W (Built-in speed controller type) Double acting Single rod Double rod R (Direct mount type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) RK (Direct mount, Non-rotating rod type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) Page Page 9 Page 9 Page 9 Page 91 Page 91 Page 92 K K Page 92 Page 93 Page 94 Page 94 Page 95 Page 95 uto Switch RK W RK R R Double cting, Double Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Single cting, Spring Return/Extend Non-rotating Rod Direct Mount, Non-rotating Rod 88

94 Series Simple Specials These changes are dealt with Simple Specials System. 1 Change of Rod End Shape Symbol -X, 1, 1, 11 pplicable Series Series ction Symbol for change of rod end shape Double acting, Single rod X, 1, 1, 11 vailable with air cushion type Single acting (Spring return/extend) X, 1, 1, 11 W Double acting, Double rod X, 1, 1, 11 vailable with air cushion Double acting, Single rod X, 1, 1, 11 Non-rotating rod type K Single acting (Spring return/extend) X, 1, 1, 11 - Double acting, Single rod X, 1, 1, 11 Built-in speed controller type W Double acting, Double rod X, 1, 1, 11 Double acting, Single rod X, 1, 1, 11 Direct mount type R Single acting (Spring return/extend) X, 1, 1, 11 Direct mount, Double acting, Single rod X, 1, 1, 11 RK Non-rotating rod type Single acting (Spring return/extend) X, 1, 1, 11 Note Precautions 1. SMC will make appropriate arrangements if no dimension, tolerance, or fi nish instructions are given in the diagram. 2. dimensions marked with will be as follows to the rod diameter (D). Enter any special dimension you desire. D 6 D 1 mm, 6 < D 25 D 2 mm, D > 25 D 4 mm 3. In the case of double rod type and single acting retraction type, enter the dimensions when the rod is retracted. Symbol: Symbol: 1 Symbol: 1 Symbol: 11 3 R sphere TP R sphere H H H H 89

95 Series Please contact SMC for detailed dimensions, specifi cations and lead times. Symbol 1 Heat Resistant Cylinder ( 1 to 15 C) -XB6 ir cylinder which changed the seal material and grease, so that it could be used even at higher temperature up to 15 from 1 C. pplicable Series Series Description Model ction Note - type W Note 1) Operate without lubrication from a pneumatic system lubricator. Note 2) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note 3) In principle, it is impossible to make built-in magnet type and the one with auto switch. But, as for the one with auto switch, and the heat resistant cylinder with heat resistant auto switch, please contact SMC. Note 4) Piston speed is ranged from 5 to 5 mm/s. How to Order Double acting, Single rod Double acting, Double rod model no. Heat resistant cylinder Except with air cushion and auto switch Except with air cushion and auto switch XB6 Symbol 2 Cold Resistant Cylinder ( 4 to 7 C) -XB7 ir cylinder which changed the seal material and grease, so that it could be used even at lower temperature down to 4 C. pplicable Series Series Description Model ction Note - type W Double acting, Single rod Double acting, Double rod Note 1) Operate without lubrication from a pneumatic system lubricator. Note 2) Use dry air which is suitable for heatless air dryer, etc. not to cause the moisture to be frozen. Note 3) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note 4) Mounting auto switch is impossible. Note 5) Piston speed is ranged from 5 to 5 mm/s. How to Order model no. Except with air cushion and auto switch Except with air cushion and auto switch XB7 Specifications mbient temperature range 1 C to 15 C Seals materials Fluororubber Grease Heat resistant grease Specifications other than above and external dimensions Warning Precautions Same as standard type Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Specifications mbient temperature range 4 C to 7 C Seals material Low nitrile rubber Grease Cold resistant grease uto switch Not mountable Dimensions Same as standard type dditional specifications Same as standard type Warning Precautions Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W K K W R R Symbol 3 Low Speed Cylinder (1 to 5 mm/s) -XB9 Even if driving at lower speeds 1 to 5 mm/s, there would be no stick-slip phenomenon and it can run smoothly. How to Order model no. Cold resistant cylinder pplicable Series Series Description Model ction Note - type Double acting, Single rod Low speed cylinder Except with air cushion XB9 Specifications Piston speed Dimensions dditional specifications 1 to 5 mm/s Same as standard type Same as standard type Note) Operate without lubrication from a pneumatic system lubricator. Warning Precautions Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. 9 Direct Mount, Non-rotating Rod RK RK uto Switch

96 Series Symbol 4 Special Port Location -XC3 Compared with the standard type, a cylinder which changes the connection port location of rod/head cover. pplicable Series Series Description Model ction Note type - Non-rotating K rod type Double acting, Single rod Double acting, Single rod Except with rail mounting type auto switches, with air cushion Except with rail mounting type auto switches How to Order model no. XC3 B Special port location Rod port location viewed from the rod side For port location, refer to the diagrams on the right and show the symbols of, B, C and D. Specifications: Same as standard type Port Location Corresponding symbol of mounting bracket (Positional relationships) D D C C Port B Port B Viewed from the rod side, the ports are rendered, B, C, and D, in the clockwise direction. <Position relation between clevis and port> Viewed from the rod side, with the clevis positioned as shown in the diagram, the ports are rendered, B, C, and D, in the clockwise direction. Head port location viewed from the rod side Symbol 5 djustable Stroke Cylinder/djustable Extension Type -XC8 It adjusts the extending stroke by the stroke adjustable mechanism equipped in the head side. (fter the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.) pplicable Series Series Description Model ction Note - type Except with air cushion, doubleside bossed, double clevis, Double acting, Single rod double foot, head flange. How to Order Mounting style Bore size Stroke XC8 Symbol djustable stroke cylinder/djustable extension type Specifications Stroke adjustment symbol Stroke adjustment range to 15 dditional specifications Same as standard type Warning Precautions 1. When the cylinder is operating, if something gets caught between the stopper bracket for adjusting the stroke and the cylinder body, it could cause bodily injury or damage the peripheral equipment. Therefore, take preventive measures as necessary, such as installing a protective cover. 2. To adjust the stroke, make sure to secure the wrench flats of the stopper bracket by a wrench etc. before loosening the lock nut. If the lock nut is loosened without securing the stopper bracket, be aware that the area that joins the load to the piston rod or the area in which the piston rod is joined with the load side and the stopper bracket side could loosen first. It may cause an accident or malfunction. djustable range Dimensions (Dimensions other than below are the same as standard type.) + 2 x Stroke H + Stroke 2 Bore size pplicable stroke H S 1 15 to to Dimensions except mentioned above are the same as standard type. 91

97 Series Symbol 6 djustable Stroke Cylinder/djustable Retraction Type -XC9 The retracting stroke of the cylinder can be adjusted by the adjusting bolt. pplicable Series Series Description Model ction Note - type Non-rotating rod type K Direct mount type R Direct mount, Non-rotating rod type RK Except with air cushion, doubleside bossed, double clevis, Double acting, Single rod double foot, head fl ange. Double acting, Single rod Double acting, Single rod Double acting, Single rod Except double-side bossed, double clevis, double foot, head fl ange. How to Order Mounting style Bore size Stroke XC9 Except clevis type djustable stroke cylinder/ djustable retraction type Symbol Specifications Stroke adjustment symbol Stroke adjustment range to 15 dditional specifications Caution Precautions Same as standard type 1. When air is supplied to the cylinder, if the stroke adjusting bolt is loosened in excess of the allowable stroke adjustment amount, be aware that the stroke adjusting bolt could fly out or air could be discharged, which could injure personnel or damage the peripheral equipment. 2. djust the stroke when the cylinder is not pressurised. If it is adjusted in the pressurised state, the seal of the adjustment section could become deformed, leading to air leakage. Dimensions (Dimensions other than below are the same as standard type.) BM djusting bolt Double cting, Single Rod Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod W K K + Stroke 7 Dual Stroke Cylinder/Double Rod Type -XC1 Two cylinders are constructed as one cylinder in a back-to-back confi guration allowing the cylinder stroke to be controlled in three steps. pplicable Series Series Description Model ction Note type - Non-rotating rod type K Double acting, Single rod Double acting, Single rod djustable range Except with air cushion Bore size BM 1 M5 x M5 x.8 75 Dimensions except mentioned above are the same as standard type. Max.3 Symbol Specifications Maximum manufacturable stroke 3 (Maximum 15 on one side) dditional specifications Same as standard type Direct Mount Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod W R R How to Order Mounting style Bore size Stroke Stroke B XC1 Dual stroke cylinder Dimensions (Dimensions other than below are the same as standard type.) Function B Port D Port C Port Port B DC When air pressure is supplied to ports and, both and B strokes retract. Direct Mount, Non-rotating Rod RK RK B + Stroke ( + B) Bore size S B stroke B stroke B D C B D C B D C stroke stroke When air pressure is supplied to ports and, out strokes. When air pressure is supplied to ports and, B out strokes. When air pressure is supplied to ports and, both strokes and B out strokes. uto Switch 92

98 Series Symbol 8 Dual Stroke Cylinder/Single Rod Type -XC11 Two cylinders can be integrated by connecting them in line, and the cylinder stroke can be controlled in two stages in both directions. pplicable Series Series Description Model ction Note - type Double acting, Single rod Except with air cushion Specifications: Same as standard type Please contact SMC for each manufacturable stroke length. How to Order Mounting style Bore size Stroke Stroke B XC11 Caution Precautions 1. Do not supply air until the cylinder is fixed. 2. If air is supplied without securing the cylinder, the cylinder could lurch, posing the risk of bodily injury or damage to the peripheral equipment. Dual stroke cylinder/single rod Functional description of dual stroke cylinder B C 1) Initial state ( stroke position) Dimensions (Dimensions other than below are the same as standard type.) Intermediate cover B port C port port SB + Stroke B + Stroke ( + B) Bore size S SB Dimensions except mentioned above are the same as standard type. Note 1) When mounting an auto switch at the extended piston rod side, the following auto switches interfere with the intermediate cover. In this case, please mount on the stroke B side. Please be aware that the auto switch detects and temporarily turns ON/OFF when passing the intermediate position of the B stroke. Solid state auto switch: D-H7, D-H7C, D-H7 W, D-H7NF, D-H7B Reed auto switch: D-C7, D-C8, D-C73C, D-C8C, D-8, D-9, D-9 V, D-79W, D-73 Note 2) The maximum manufacturable stroke of this cylinder is 15 mm for both and B. B stroke stroke stroke B stroke B B B B B B B B stroke B stroke B stroke B stroke C C C C C C C stroke stroke stroke or B stroke operation can be made individually. stroke stroke 2) 1st stage ( stroke operation) When the air pressure is supplied from the port, the rod operates the stroke. 3) 2nd stage (B- stroke operation) Following the 1st stage, when the air pressure is supplied from the port, the rod operates the B- stroke. 4) Cylinder retraction When the air pressure is supplied from the port, the rod retracts completely. stroke operation 1) Initial state ( stroke position) 2) Operation When the air pressure is supplied from the port, the rod operates the stroke. B stroke operation 1) Initial state ( stroke position) 2) Operation When the air pressure is supplied from the port, the rod operates the B stroke. Double output is possible. B C 1) Initial state ( stroke position) B stroke stroke 93 W W stroke B C 2) Double output When the air pressure is supplied to the and ports at the same time, the double output can be obtained in the stroke range.

99 Series Symbol 9 Fluororubber Seal -XC22 pplicable Series Series Description Model ction Note Double acting, Single rod Except with air cushion type Single acting (Spring return/extend) - W Double acting, Double rod Except with air cushion Non-rotating rod type K Double acting, Single rod How to Order model no. Fluororubber seal XC22 Specifications Seal material mbient temperature range Symbol 1 With Hose Nipple -XC51 The one with hose nipple attached in order to save time for assembly at the time of shipment. pplicable Series Series Description Model ction - Direct mount type type How to Order Non-rotating rod type Built-in speed controller type Direct mount type Direct mount, Non-rotating rod type model no. R Double acting, Single rod W K W R RK Double acting, Single rod Single acting (Spring return/extend) Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Double acting, Double rod With hose nipple Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Single acting (Spring return/extend) XC51 H4 Hose nipple type H4 ø4/2.5 with restriction H6 ø6/4 with restriction MH4 ø4/2.5 without restriction MH6 ø6/4 without restriction Dimensions (Dimensions other than below are the same as standard type.) Hose nipple Width across flats 8(7) Fluororubber With auto switch Note 1) : 1 C to 6 C (No freezing) Without auto switch : 1 C to 7 C Specifications other Same as standard type than above and external dimensions Note 1) Please contact SMC, as the type of chemical and the operating temperature may not allow the use of this product. Note 2) Cylinders with auto switches can also be produced; however, auto switch related parts (auto switch units, mounting brackets, built-in magnets) are the same as standard products. Before using these, please contact SMC regarding their suitability for the operating environment. Specifications: Same as standard type pplicable Hose Nipple Type Symbol pplicable bore size Function Hose nipple part no. H4 ø4/2.5 With a fixed orifice CJ-5H-4 H6 ø6/4 (ø.8) CJ-5H-6 MH4 ø4/2.5 Without fixed M-5H-4 MH6 ø6/4 orifi ce M-5H-6 13 (12) The above fi gure shows the ø6/4 hose nipple mounting dimensions. The dimensions in ( ) show those for the ø4/2.5 hose nipple. Double cting, Single Rod uto Switch W K K W R R RK RK Double cting, Double Rod Single cting, Spring Return/Extend Non-rotating Rod Built-in Speed Controller Double cting, Double Rod Double cting, Single Rod Direct Mount Direct Mount, Non-rotating Rod 94

100 Series Symbol 11 Grease for Food Processing Equipment -XC85 Food grade grease (certified by NSF-H1) is used as lubricant. pplicable Series Series Description Model ction - type Non-rotating rod type Built-in speed controller type Direct mount type Direct mount, Non-rotating rod type W K W R RK Double acting, Single rod Single acting (Spring return/extend) Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Single acting (Spring return/extend) Specifications mbient temperature range 1 C to 7 C Seal material Nitrile rubber Grease Grease for food uto switch Mountable Dimensions Same as standard type Specifications other than above Splash zone Not installable Same as standard type Food zone Not installable How to Order model no. XC85 Container Warning Precautions Grease for food processing equipment Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Not installable zone Food zone n environment where food which will be sold as merchandize, directly touches the cylinder s components. Splash zone n environment where food which will not be sold as merchandize, directly touches the cylinder's components. Installable zone Non-food zone n environment where there is no contact with food. Food Non-food zone Installable Note 1) void using this product in the food zone. (Refer to the figure above.) Note 2) When the product is used in an area of liquid splash, or a water resistant function is required for the product, please consult with SMC. Note 3) Operate without lubrication from a pneumatic system lubricator. Note 4) Use the following grease pack for the maintenance work. GR-H-1 (Grease: 1 g) Note 5) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Symbol 12 PTFE Grease -X446 pplicable Series Series Description Model ction - type Non-rotating rod type Built-in speed controller type Direct mount type Direct mount, Non-rotating rod type W K W R RK Double acting, Single rod Single acting (Spring return/extend) Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Single acting (Spring return/extend) Specifications: Same as standard type Dimensions: Same as standard type * When grease is necessary for maintenance, grease pack is available, please order it separately. GR-F-5 (Grease: 5 g) How to Order model no. X446 PTFE grease 95