10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.

Transcription

1 ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø % lighter RoS (ø stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type kg Reduced weight by changing the shape of the rod cover and head cover. dded New Series/Made to Order., Double rod: Series W-Z Made to Order: eat resistant cylinder (-X6), With heavy duty scraper (-XC4), djustable stroke cylinder (-XC8, 9) and Dual stroke cylinder (-XC10, 11), etc. Series CT.EUS0-31C-UK

2 Double acting, Single rod Series ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 Part numbers with rod end bracket and/or pivot bracket available Not necessary to order a bracket for the applicable cylinder separately Note) Mounting bracket is shipped together with the product, but not assembled. Example) MD D Z- N V -M9W Mounting style Pivot bracket No bracket N Pivot bracket is shipped together with the product, but not assembled. N: Kit of pivot bracket and double clevis Kit of pivot bracket Rod end bracket and trunnion No bracket V Single knuckle joint W Double knuckle joint With rod end bracket V: Single knuckle W: Double joint knuckle joint pplicable to only D (Double clevis) and T (Centre trunnion) mounting styles. Various mounting bracket options Suitable mounting brackets can be selected for the installation condition. Improved amount of mounting freedom D: Double clevis N: Double clevis pivot bracket C: Single clevis G: ead flange : asic V: Single knuckle joint L: xial foot N: Trunnion pivot bracket W: Double ek knuckle kle joint F: Rod flange L: xial foot T: Centre trunnion N: Trunnion pivot bracket 1

3 ir Cylinder Lightweight Reduced weight by changing the shape of the rod cover and head cover. [kg] New Reduction rate Existing model t 100 stroke pplicable speed/load Piston speed: Max mm/s (ø 3 to ø 15) Load yield: See table below. [kg] Speed: 00 mm/s Maximum load weight Port Various switches such as compact auto switches and magnetic field resistant auto switches can be mounted. Mounting dimensions are the same as the existing product. Series Variations Series Type Cushion No environmental hazardous substances used Lead free bushing is used as sliding material. Compliant with EU RoS directive. 3 Compact auto switches D-M9 D-9 Magnetic field resistant auto switches D-P3DW 1 D-P3DW D-P4DW 1 Ø 3 only uilt-in With magnet rod boot Page Single rod -Z Double acting, Single rod Rubber ir Page 5 Double rod W-Z Double acting, Double rod Rubber ir Page 15 Non-rotating rod Single rod K Double acting, Single rod Rubber ir Page 1 Non-rotating rod Double rod KW Double acting, Double rod Rubber ir Page 5 With end lock Double acting, Single rod Rubber ir Page 9 Smooth Cylinder Y-Z Double acting, Single rod Rubber

4 Combinations of and Made to Order Specifications Series Series ( type) : Double acting : Made to Order : Special product (Please contact SMC for details.) Single rod Double rod : Not available ir Rubber ir Rubber Page 5 Page 15 Specifications pplicable ø 3 to ø 100 ø 15 ø 3 to ø 100 ø 15 ø 3 to ø 100 ø 15 ø 3 to ø 100 ø 15 bore size Long st Long stroke ø 3 to ø 15 D uilt-in magnet - J K ction/ Type Cushion Page With rod boot 5 Copper (Cu) and Zinc (Zn)-free Note 1) ø 3 to ø 100 R V Water resistant 10- Clean series Note 6) ø 3 to ø Copper Note 5) and Fluorine-free Note 6) X Change of rod end shape X5 Oversized rod cylinder Note 6) X13 Low speed cylinder (5 to 50 mm/s) Note 6) ø 3 to ø 15 XC3 Special port location Note 6) XC4 With heavy duty scraper XC5 eat resistant cylinder (10 to 110 C) XC6 Piston rod and rod end nut made of stainless steel Note 6) ø 3 to ø 15 XC7 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel XC8 djustable stroke cylinder/djustable extension type XC9 djustable stroke cylinder/djustable retraction type XC10 Dual stroke cylinder/double rod type XC11 Dual stroke cylinder/single rod type XC1 Tandem cylinder XC14 Change of trunnion bracket mounting position XC Fluororubber seal ø 3 to ø 15 XC7 Double clevis and double knuckle joint pins made of stainless steel XC9 Double knuckle joint with spring pin XC30 Rod trunnion XC35 With coil scraper XC65 Made of stainless steel (Combination of XC7 and XC68) XC68 Made of stainless steel (with hard chrome plated piston rod) X1184 Cylinder with heat resistant reed auto switch (10 to 10 C) Note 1) For details, refer to the WE catalogue on Note ) For details about the smooth cylinder, refer to the WE catalogue in Note 3) Simple specials except XC14 and XC14. 3

5 Series K (Non-rotating rod type) Double acting (With end lock) Y Note ) (Smooth Cylinder) Single rod Double rod Single rod Single rod ir Rubber ir Rubber ir Page 1 Page 5 Page 9 ø 3 to ø 100 Long st D - J K 5 R V X X5 X13 XC3 XC4 XC5 Note 4) Note 4) XC6 XC7 XC8 XC9 XC10 XC11 XC1 Note 3) XC14 XC XC7 XC9 XC30 XC35 XC65 XC68 X1184 Note 4) XC10 specification for the K series is the non-rotating type on both sides. For only one side, submit a special order request form. Note 5) Copper-free for the externally exposed part. With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W 4

6 ir Cylinder: Type Double cting, Single Rod Series RoS ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 With auto switch 5 MD M9W With auto switch ccessories 1 Number of auto (uilt-in magnet) No bracket uto switch switches Mounting style N Pivot bracket Without auto switch pcs. asic Only for D and T mounting styles. For applicable auto switches, S 1 pc. Pivot bracket is shipped together L xial foot refer to the table below. 3 3 pcs. with the product. F Rod fl ange 3 3 mm n n pcs. G ead fl ange mm Suffix (Cushion) mm ir cushion Made to Order C Single clevis mm N Rubber bumper For details, refer to page 6. D Double clevis T Centre trunnion mm Since the bumpers are attached to the both sides of the ccessories piston for rubber bumper type, the overall length is longer than mm the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø No bracket mm 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm. V Single knuckle joint Port thread type Suffix (Rod boot) W Double knuckle joint Rc Cylinder stroke knuckle joint pin is not provided with the single knuckle joint. None Rod end bracket is shipped together with the product. TN NPT Refer to Strokes J Nylon tarpaulin TF G on page 6. K eat resistant tarpaulin Refer to "Ordering Example of Cylinder ssembly" on page 6. Mounting brackets other than trunnion type are shipped together. ow to Order pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (-colour indication) Water resistant (-colour indication) Electrical entry Grommet Terminal conduit Grommet Indicator light Wiring (Output) Yes 3-wire (NPN) -wire 4 V Terminal 33 conduit 34 PLC Yes 100 V, 00 V DIN terminal 44 Relay, Diagnostic indication (-colour indication) Grommet 59W PLC 1 Water-resistant type auto switch can be mounted on the above models, but in such case SMC cannot guarantee water resistance. water-resistant type cylinder is recommended for use in an environment which requires water resistance. Lead wire length symbols: 0.5 m (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches than listed above, refer to page 45 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. For the D-P3DW, refer to the uto Switch Guide. The D-9 /M9 /P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-9 /M9 before shipment.) The D-P3DW is mountable only on Ø 3. Z Z Load voltage uto switch model Lead wire length (m) DC C Tie-rod mounting Pre-wired connector and mounting ( ) (M) (L) (Z) M9N IC 3-wire (NPN) 3-wire (PNP) 4 V 5 V,1 V M9P circuit -wire 1 V M9 3-wire (NPN) 5 V,1 V G39 -wire 1 V K39 3-wire (NPN) M9NW IC 5 V,1 V circuit 3-wire (PNP) M9PW -wire 1 V M9W M9N 1 IC circuit 4 V 5 V,1 V 3-wire (PNP) M9P 1 -wire 1 V M9 1 No 1 V 00 V or less 64 pplicable load With diagnostic output (-colour indication) 4-wire (NPN) 5 V,1 V F59F IC circuit P3DW Magnetic fi eld resistant -wire P3DW (-colour indication) (Non-polar) P4DW 3-wire (NPN equivalent) 5 V 96 IC circuit Yes 100 V 93 Grommet No 100 V or less 90 IC circuit Relay, Yes 100 V, 00 V 54 PLC Relay, PLC

7 ir Cylinder: Type Double cting, Single Rod Series Double acting Made to Order (For details, refer to pages 47 to 61.) Specifi cations -X Change of rod end shape -X5 Oversized rod cylinder 1 3 -X6 eat resistant cylinder (10 to 150 C) -XC3 Special port location 3 -XC4 With heavy duty scraper -XC5 eat resistant cylinder (10 to 110 C) -XC6 Piston rod and rod end nut made of stainless steel 3 4 -XC7 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel -XC8 djustable stroke cylinder/djustable extension type -XC9 djustable stroke cylinder/djustable retraction type -XC10 Dual stroke cylinder/double rod type -XC11 Dual stroke cylinder/single rod type -XC1 Tandem cylinder -XC14 Change of trunnion bracket mounting position -XC Fluororubber seal -XC7 Double clevis and double knuckle joint pins made of stainless steel -XC9 Double knuckle joint with spring pin -XC30 Rod trunnion -XC35 With coil scraper -XC65 Made of stainless steel (Combination of XC7 and XC68) -XC68 Made of stainless steel (with hard chrome plated piston rod) -X1184 Cylinder with heat resistant reed auto switch (10 to 10 C) 1 ir cushion only Except ø 15 3 The cover shape is the same as the existing product. 4 ø 15 only For special port location (-XC3), the mounting bracket and port location can be determined using the standard product corresponding to the operating conditions. For parts made os stainless steel (-XC6), use the same specification stainless steel with the surface treatment (with hard chrome plated piston rod) (-XC68) Specifications ction Double acting, Single rod Fluid ir Proof pressure 1.5 MPa Maximum operating pressure Minimum operating pressure mbient and fluid temperature Lubricant Piston speed Strokes ore stroke Max. manufacturable size Stroke range q Stroke range w stroke 3 5, 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500 Up to , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600 Up to 1800 Up to , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000 Up to 000 Note 1) Manufacture of intermediate strokes is possible. (Spacers are not used.) Note ) pplicable strokes should be confirmed according to the usage. For details, refer to ir Cylinders Model Selection the WE catalogue. In addition, the products that exceed the stroke range q might not be able to fulfill the specifi cations due to the defl ection etc. Note 3) Please consult with SMC for manufacturability and the part numbers when exceeding the stroke range w. Note 4) The stroke range with rod boot is up to 1000 mm. Please consult with SMC when exceeding 1000 mm strokes. Ordering Example of Cylinder ssembly uto switch Double clevis Pivot bracket 1.0 MPa 0.05 MPa Without auto switch: 10 to 70 C (No freezing) With auto switch: 10 to 60 C Not required (Non-lube) 50 to 1000 mm/s Stroke length tolerance Up to 50: , 51 to 1000: , 1001 to 1500: , 1501 to 000: +. 0 Cushion ir cushion or Rubber bumper Port size 1/8 1/4 3/8 1/ asic, xial foot, Rod fl ange, ead fl ange Mounting Single clevis, Double clevis, Centre trunnion Cylinder model: MDD3-50Z-NW-M9W Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9W: pcs. Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W Refer to pages 38 to 44 for cylinders with auto switches uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting uto switch mounting brackets/part no. Operating range Double knuckle joint 6

8 Series ccessories Rod oot Material Option Mounting asic xial foot Rod fl ange ead fl ange Single clevis Double clevis Centre trunnion Rod end nut Clevis pin Single knuckle joint Double knuckle joint (with pin) Rod boot Material Max. ambient temp. J Nylon tarpaulin 70 C K eat resistant tarpaulin 110 C Max. ambient temperature for rod boot itself. Mounting rackets/part No. llowable Kinetic Energy xial foot Note 1) -L03 -L04 -L05 -L06 -L08 -L10 -L1 Rod/ead fl ange -F03 -F04 -F05 -F06 -F08 -F10 -F1 Single clevis -C03 -C04 -C05 -C06 -C08 -C10 -C1 Double clevis -D03 -D04 -D05 -D06 -D08 -D10 -D1 Note 1) Order two foots per cylinder. Note ) ccessories for each mounting bracket are as follows. xial foot, Rod/ead fl ange, Single clevis/ody mounting bolt; Double clevis/ody mounting bolt, Clevis pin, Flat washers and Split pins. Refer to page 14 for details. Theoretical Force Load weight [kg] ø 15 ø 100 ø 80 ø 63 ø 50 ø 40 ø 3 (Unit: N) OUT IN 10 Rod diameter Operating Piston area direction (mm ) Operating pressure [MPa] OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN Note) Theoretical force [N] = Pressure [MPa] x Piston area [mm ] Maximum speed [mm/s] 1000 Example) Load limit at rod end when the air cylinder ø 63 is actuated at 500 mm/s. Extend upward from 500 mm/s on the horizontal axis of the graph to the intersection point with the line for a tube bore size of 63 mm, and then extend leftward from this point to fi nd the load of 80 kg. Weights (kg) asic xial foot asic weight Rod/ead fl ange Single clevis Double clevis Centre trunnion dditional weight per 50 mm of stroke ll mounting brackets Single knuckle joint ccessories Double knuckle joint (with pin) Calculation Example) 3-100Z (asic, ø 3, 100 stroke) asic weight 0.44 (asic, ø 3) dditional weight 0.11/50 stroke Cylinder stroke 100 stroke x 100/50 = 0.66 kg 7

9 ir Cylinder: Type Double cting, Single Rod Series Construction Component Parts o!0!7!9!4 i q!!6!1 er t!8 uw No. Description Material Q ty Note 1 Rod cover luminium die-cast 1 Trivalent chromated ead cover luminium die-cast 1 Trivalent chromated 3 Cylinder tube luminium alloy 1 ard nodised 4 Piston rod Carbon steel 1 ard chrome plating 5 Piston luminium alloy 1 6 Cushion ring luminium alloy 1 nodised 7 Cushion ring luminium alloy 1 nodised 8 ushing earing alloy 1 9 Cushion valve Steel wire Trivalent zinc chromated 10 Retaining ring Steel for spring ø 40 to 15 Replacement Parts/Seal Kit Kit no. 3 3ZPS 40 C40ZPS 50 C50ZPS 63 C63ZPS 80 C80ZPS 100 C100ZPS 15 15PS Contents Set of the nos.!4,!5,!6,!8 Seal kits consist of items!4,!5,!6,!8, and can be ordered by using the seal kit number corresponding to each bore size. Centre trunnion type should not be disassembled. (Refer to page 6.) The seal kit includes a grease pack (10 g for ø 3 to ø 50, 0 g for ø 63 and ø 80, 30 g for ø 100 and ø 15). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-00 (0 g) 15 No. Description Material Q ty Note 11 Tie rod Carbon steel 4 Trivalent zinc chromated 1 Tie rod nut Carbon steel 8 Trivalent zinc chromated 13 Wear ring Resin 1 14 Rod seal NR 1 15 Piston seal NR 1 16 Cushion seal Urethane 17 Cushion valve seal NR 18 Cylinder tube gasket NR 19 Rod end nut Rolled steel 1 Trivalent zinc chromated 0 Magnet (1) With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W Water Resistant ir Cylinder Water resistant air cylinders are also available in the series, which are suitable for use on machine tools, where exposure to coolant is possible and applicable for food machinery and automobile washing equipment in an environment where water splashes. Please refer to the catalogue in our website for more information. 8

10 Series asic: () Cushion valve W V Port øe Width across flats K G x P When the stroke is 1001 mm or longer, a tie-rod reinforcement ring is attached. G C øe ød TX With rod boot C TY MM Width across flats 1 1 L K F M N x 4 x J TT S + Stroke ZZ + Stroke N ød øe h l f L 1 C D E F G 1 J K K M MM N P S TT TX TY V W ZZ M6 x M10 x / M6 x M14 x / M8 x M18 x / M8 x M18 x / M10 x M x / M10 x M6 x / M1 x M7 x 38 1/ With Rod oot l d e f 1 to to to to to to to to to to to to h 1 to to to to to to to to to to to to Rubber umper S ZZ Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm

11 ir Cylinder: Type Double cting, Single Rod Series /With Mounting racket xial foot: (L) Cushion valve TY LX LZ Rod flange: (F) Port L LY LD L LS LT LX LY LZ TT TX TY X Y ZZ Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm Cushion valve Port 4 x øfd FY F TY FX FZ F FD FE FT FX FY FZ Fd TT TX TY øfd LT Y X FE FT When the stroke is 1001 mm or longer, a tie-rod reinforcement ring is attached. TT LS + Stroke ZZ + Stroke Rubber umper LS ZZ TX TT Refer to asic () for other dimensions. TX X Y 4 x øld With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm 10

12 Series /With Mounting racket ead flange: (G) Cushion valve Port 4 x øfd Refer to asic () for other dimensions. When the stroke is 1001 mm or longer, a tie-rod reinforcement ring is attached. FY F TX TY FX FZ F FD FT FX FY FZ TT TX TY ZZ Rubber umper ZZ ZZ + Stroke TT FT Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm Single clevis: (C) Cushion valve Port When the stroke is 1001 mm or longer, a tie-rod reinforcement ring is attached. CD10 TX CX TY TT Z + Stroke ZZ + Stroke U L RR CD10 CX L RR TT TX TY U Z ZZ Rubber umper Z ZZ Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm 11

13 ir Cylinder: Type Double cting, Single Rod Series /With Mounting racket Double clevis: (D) Cushion valve Cushion valve CX CZ TY TX TZ Port CD10 CDd9 CX CZ L RR TT TX TY U Z ZZ Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm Centre trunnion: (T) Port øtde8 TY TDe8 TT TX TY TZ Z Rubber umper Z Z + 1/ stroke TT Z + Stroke ZZ + Stroke TX Rubber umper Z ZZ TT Refer to asic () for other dimensions. U L ole dia.: CD10 Shaft dia.: CDd9 RR With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the Z dimension is longer than the cylinder with air cushion as follows: ø 3, ø 40: +3 mm, ø 50, ø 63: +4 mm, ø 80, ø 100: +5 mm, ø 15: +6 mm 1

14 Series Pivot racket/trunnion and Double Clevis Pivot racket Part No Description Trunnion pivot bracket Note) -S03 -S04 -S06 -S10 -S1 Double clevis pivot bracket Note) Order trunnion pivot brackets per cylinder. Trunnion pivot bracket TO TZ TX TO Z + 1/ stroke TF T øtd TY 4 x øtt Part no. TS TC T TL TU TC TX TE TO TR TT TS T TF Z TD10 -S S04 -S S S TU TL T x øtr TU Rubber umper Z Double clevis pivot bracket DX Z + Stroke D DD 4 x ødt 90 D DS DO Part no DC DE DO D D DL DU DC DX DE DO DR DT DS D Z DD DU DL D 4 x ødr DU Rubber umper Z Rotating ngle , , , Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the Z dimension is longer than the cylinder with air cushion as follows: ø 3, ø 40: +3 mm, ø 50, ø 63: +4 mm, ø 80, ø 100: +5 mm, ø 15: +6 mm Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm

15 ir Cylinder: Type Double cting, Single Rod Series Dimensions of ccessories Rod end nut () I type Single knuckle joint 30 NX D d MM ND10 øe1 1 C 45 U1 L1 RR1 Part no. d C D NT-03 3 M10 x NT M14 x NT-05 50, 63 M18 x NT M x NT M6 x NT-1M 15 M7 x Part no. 1 E1 L1 MM R1 U1 ND10 NX I-03M M10 x I-04M M14 x I-05M 50, M18 x I-08M M x I-10M M6 x I-1M M7 x racket Combinations Knuckle joint pin Clevis pin Y type Double knuckle joint øe1 MM x ød m l L Part no. Dd9 L l m d pplicable Clevis Knuckle (Drill through) split pin CD-M03 Note 1) 3, ø 3 x 18 l CD-M05 Note 1) 50, ø 4 x 5 l CD-M08 Note 1) 80, ø 4 x 35 l IY-1 Note ) ø 4 x 40 l Note 1) Split pins and flat washers are included. Note ) Only pins are included when shipped. Part no. racket combination available Refer to the figure below. racket for cylinder racket for workpiece Single clevis Double clevis Single knuckle joint Double knuckle joint ønd10 L1 U1 ødd9 NX RR1 NZ E1 L1 MM R1 U1 ND10 NX NZ Y-03M Note 1) M10 x Y-04M Note 1) M14 x Y-05M Note 1) 50, M18 x Y-08M Note 1) M x Y-10M Note 1) M6 x Y-1M Note ) M7 x Note 1) pin, split pins and fl at washers are included. Note ) pin and split pins are included. Clevis pivot bracket Single clevis q w Double clevis e r o Single knuckle joint t y Double knuckle joint u i!0 No. ppearance No. ppearance q w e Single clevis + Double clevis Single clevis + Double knuckle joint Double clevis + Single clevis y u i Single knuckle joint + Double knuckle joint Double knuckle joint + Single clevis Double knuckle joint + Single knuckle joint With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W Double clevis + Single knuckle joint Double clevis + Clevis pivot bracket r o Single knuckle joint + Double clevis Double knuckle joint + Clevis pivot bracket t!0 14

16 ir Cylinder: Type Double cting, Double Rod Series W ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 With auto switch L F T 15 With auto switch (uilt-in magnet) Mounting style asic xial foot Rod fl ange Centre trunnion W MDW L L 3 3 mm mm mm mm mm mm mm 3 3 ow to Order Z Z M9W uto switch Without auto switch For applicable auto switches, refer to the table below. Port thread Mounting brackets other than type trunnion type are shipped together. Rc TN NPT TF G Suffix (Rod boot) None J Nylon tarpaulin (one end) Cylinder stroke JJ Nylon tarpaulin (both ends) Refer to Strokes on page 16. K eat resistant tarpaulin (one end) KK eat resistant tarpaulin (both ends) pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Electrical entry Indicator light Wiring (Output) Load voltage uto switch model Lead wire length (m) 1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. DC Number of auto switches pcs. S 1 pc. 3 3 pcs. n n pcs. Made to Order For details, refer to page 16. Suffix (Cushion) ir cushion N Rubber bumper Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm. Pre-wired connector Lead wire length symbols: 0.5 m (Example) M9NW 3 m L (Example) M9NWL 1 m M (Example) M9NWM 5 m Z (Example) M9NWZ Solid state auto switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed above, refer to page 45 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. For the D-P3DW, refer to the uto Switch Guide. The D-9 /M9 /P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-9 /M9 before shipment.) The D-P3DW is mountable only on Ø 3. C Tie-rod mounting and mounting ( ) (M) (L) (Z) M9N 3-wire (NPN) Grommet 3-wire (PNP) 4 V 5 V, 1 V M9P IC circuit -wire 1 V M9 Terminal 3-wire (NPN) 5 V, 1 V G39 conduit -wire 1 V K39 3-wire (NPN) M9NW Diagnostic indication 5 V, 1 V IC circuit 3-wire (PNP) M9PW (-colour indication) Yes -wire 1V M9W 3-wire (NPN) M9N 1 Water resistant 4 V 5 V, 1 V IC circuit 3-wire (PNP) M9P (-colour indication) 1 Grommet -wire 1 V M9 1 Diagnostic output (-colour indication) 4-wire (NPN) 5 V, 1 V F59F IC circuit pplicable load P3DW Magnetic fi eld resistant -wire P3DW (-colour indication) (Non-polar) P4DW 3-wire 5 V 96 IC circuit Yes (Equiv. to NPN) 100 V 93 Grommet No 100 V or less 90 IC circuit Relay, Yes 100 V, 00 V 54 PLC No 1 V 00 V or less 64 -wire 4 V Terminal 33 conduit 34 PLC Yes 100 V, 00 V DIN terminal 44 Relay, Diagnostic indication (-colour indication) Grommet 59W PLC Relay, PLC

17 ir Cylinder: Type Double cting, Double Rod Series W Double acting, ir cushion -X -X6 -XC3 -XC4 -XC5 Made to Order (For details, refer to pages 47 to 61.) Specifi cations Change of rod end shape eat resistant cylinder (10 to 150 C) Special port location 1 With heavy duty scraper eat resistant cylinder (10 to 110 C) -XC7 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel -XC14 Change of trunnion bracket mounting position -XC Fluororubber seal -XC30 Rod trunnion -XC35 With coil scraper -XC68 Made of stainless steel (with hard chrome plated piston rod) 1 The cover shape is the same as the existing product. ø 15 only For special port location (-XC3), the mounting bracket and port location can be determined using the standard product corresponding to the operating conditions. For parts made os stainless steel (-XC6), use the same specification stainless steel with the surface treatment (with hard chrome plated piston rod) (-XC68) Refer to pages 38 and 44 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting uto switch mounting brackets/part no. Operating range Water Resistant ir Cylinder Water resistant air cylinders are also available in the series, which are suitable for use on machine tools in an atmosphere with coolant and applicable to food machinery and automobile washing equipment in an environment with water splashes. Please refer to the catalogue in our website www. smc.eu for more information. Specifications ction Double acting, Double rod Fluid ir Proof pressure 1.5 MPa Max. operating pressure 1.0 MPa Min. operating pressure 0.05 MPa mbient and fluid Without auto switch: 10 to 70 C (No freezing) temperature With auto switch: 10 to 60 C Lubrication Not required (Non-lube) Operating piston speed 50 to 1000 mm/s 50 to 700 mm/s llowable stroke tolerance Up to 50: , 51 to 1000: , 1001 to 1500 Cushion Note) ir cushion or Rubber bumper Port size (Rc, NPT, G) 1/8 1/4 3/8 1/ Mounting asic, xial foot, Rod flange, Centre trunnion Note) Kinetic energy absorbable by the cushion mechanism is identical to double acting, single rod. Strokes ore size stroke Stroke range q 3 5, 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000 Max. manufacturable Stroke range w stroke Up to 1000 Up to 100 Up to 1500 Up to 1800 Note 1) Manufacture of intermediate strokes is possible. (Spacers are not used.) Note ) pplicable strokes should be confi rmed according to the usage. For details, refer to ir Cylinders Model Selection. In addition, the products that exceed the stroke range q might not be able to fulfill the specifications due to the deflection etc. Note 3) Please consult with SMC for manufacturability and the part numbers when exceeding the stroke range w. Note 4) The stroke range with rod boot is up to 1000 mm. Please consult with SMC when exceeding 1000 mm strokes. ccessories Mounting asic xial foot Rod fl ange Centre trunnion Rod end nut Option Order two foots per cylinder. Single knuckle joint Double knuckle joint (with pin) Rod boot Rod oot Material Material Max. ambient temp. J Nylon tarpaulin 70 C K eat resistant tarpaulin 110 C Max. ambient temperature for rod boot itself. Mounting rackets/part No xial foot -L03 -L04 -L05 -L06 -L08 -L10 -L1 Rod fl ange -F03 -F04 -F05 -F06 -F08 -F10 -F1 16 With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W

18 Series W Theoretical Force (Unit: N) OUT IN Rod diameter Operating direction Piston area [mm ] Note) Theoretical force [N] = Pressure [MPa] x Piston area (mm ) Operating pressure [MPa] IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT Weights/luminium Tube [kg] asic asic weight xial foot Rod fl ange Centre trunnion dditional weight per 50 mm of stroke ll mounting brackets ccessories Single knuckle joint Double knuckle joint (with pin) Calculation Example) W3-100Z (asic, ø 3, 100 stroke) asic weight 0.56 (asic, ø 3) dditional weight 0.15/50 stroke Cylinder stroke 100 stroke x 100/50 = 0.86 kg 17

19 ir Cylinder: Type Double cting, Double Rod Series W Construction Component Parts!6!1 y q!0!3 o w e t!!7 r!5 ø 3 No. Description Material Q ty Note 1 Rod cover luminium die-cast Trivalent chromated Cylinder tube luminium alloy 1 ard nodised 3 Piston rod Carbon steel 1 ard chrome plating 4 Piston luminium alloy 1 5 Cushion ring luminium alloy nodised 6 ushing earing alloy 7 Cushion valve Steel wire Trivalent zinc chromated 8 Retaining ring Steel for spring ø 40 to 15 9 Tie rod Carbon steel 4 Trivalent zinc chromated Replacement Parts/Seal Kit Kit no. 3 W3ZPS 40 CW40ZPS 50 CW50ZPS 63 CW63ZPS 80 CW80ZPS 100 CW100ZPS 15 W15PS Contents Set of the nos.!1,!,!3,!5 Seal kits consist of items!1,!,!3,!5, and can be ordered by using the seal kit number corresponding to each bore size. Trunnion type should not be disassembled. (Refer to page 6.) The seal kit includes a grease pack (10 g for ø 3 to ø 50, 0 g for ø 63 and ø 80, 30 g for ø 100 and ø 15). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-00 (0 g) u i!4 W15 No. Description Material Q ty Note 10 Tie rod nut Carbon steel 8 Trivalent zinc chromated 11 Rod seal NR 1 Piston seal NR 1 13 Cushion seal Urethane 14 Cushion valve seal NR 15 Cylinder tube gasket NR 16 Rod end nut Rolled steel Trivalent zinc chromated 17 Magnet (1) With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W 18

20 Series W asic: () V Port W Cushion valve øe Width across flats K G x Rc P When the stroke is 1001 mm or longer, a tie-rod reinforcement ring is attached. G Width across flats K C øe ød ød øe C TY Width across flats 1 MM K 1 TT 1 L M L x 4 x J F N N F K S + Stroke + Stroke ZZ + x Stroke MM Width across flats 1 ød øe TX With rod boot Width across flats K 19 ød øe ød MM Width across flats l f h G x Rc P When the stroke is 1001 mm or longer, a tie-rod reinforcement ring is attached. G 1 L K l f N TT N f l + Stroke K h S + Stroke h + Stroke ZZ + x Stroke TX Width across flats K 1 L ød øe ød MM Width across flats 1 L 1 C D E F G 1 J K K M MM N P S TT TX TY V W ZZ M6 x M10 x / M6 x M14 x / M8 x M18 x / M8 x M18 x / M10 x M x / M10 x M6 x / M1 x M7 x / With Rod oot l h d e f 1 to 50 Note) ZZ indicates dimensions for double side rod boot. 51 to to to to to to to 150 ZZ Note) 301 to to to to to to to to to to to to 901 to to to 901 to to to to to to to to to 600 Rubber umper S ZZ to to to 901 to Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm

21 ir Cylinder: Type Double cting, Double Rod Series W : With Mounting racket xial foot: (L) Port Rod flange: (F) Port Port TY LX LZ TY FX FZ Centre trunnion: (T) TX TZ Cushion valve L LY Cushion valve 4 x øfd FY Cushion valve F øtde8 TY øfd LT Y X FT Z + 1/ stroke Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm, ø 15: +1 mm Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the Z dimension is longer than the cylinder with air cushion as follows: ø 3, ø 40: +3 mm, ø 50, ø 63: +4 mm, ø 80, ø 100: +5 mm, ø 15: +6 mm (For trunnion mounting) Refer to asic () for other dimensions and with rod boot. When the stroke is 1001 mm or longer, a tie-rod reinforcement ring is attached. TT LS + Stroke TT TT TX TX X 4 x øld Y X Y LD L LS LT LX LY LZ TT TX TY F FD FT FX FY FZ Fd TT TX TY TDe8 TT TX TY TZ Z With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W

22 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K ø 3, ø 40, ø 50, ø 63, ø 80, ø 100 With auto switch Mounting style asic/without bracket L xial foot F Rod flange G ead flange C Single clevis D Double clevis T Centre trunnion uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) MDK With auto switch (uilt-in magnet) K MDK L L mm mm mm mm mm mm Port thread type Rc TN NPT TF G M9W uto switch Without auto switch For applicable auto switches, refer to the table below. Suffix (Rod boot) None J Nylon tarpaulin K eat resistant tarpaulin Cylinder stroke Refer to " Strokes" on page. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (-colour indication) Water resistant (-colour indication) Electrical entry Indicator light Wiring (Output) ow to Order Load voltage uto switch model Lead wire length (m) DC C Tie-rod mounting Made to Order For details, refer to page. Number of auto switches pcs. S 1 pc. 3 3 pcs. n n pcs. Suffix (Cushion) ir cushion N Rubber bumper Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm. Pre-wired connector and mounting ( ) (M) (L) (Z) M9N pplicable load 3-wire (NPN) Grommet 3-wire (PNP) 4 V 5 V, 1 V M9P IC circuit -wire 1 V M9 Terminal 3-wire (NPN) 5 V, 1 V G39 conduit -wire 1 V K39 3-wire (NPN) M9NW 5 V, 1 V 3-wire (PNP) M9PW IC circuit Yes -wire 1V M9W 3-wire (NPN) M9N 1 4 V 5 V, 1 V IC circuit 3-wire (PNP) M9P 1 Grommet -wire 1 V M9 1 Diagnostic output (-colour indication) 4-wire (NPN) 5 V, 1 V F59F IC circuit P3DW Magnetic field resistant -wire P3DW (-colour indication) (Non-polar) P4DW 3-wire Yes (Equiv. to NPN) 5 V 96 IC circuit 100 V 93 Grommet No 100 V or less 90 IC circuit Relay, Yes 100 V, 00 V 54 PLC No 1 V 00 V or less 64 -wire 4 V Terminal 33 conduit 34 PLC Yes 100 V, 00 V DIN terminal 44 Relay, Diagnostic indication (-colour indication) Grommet 59W PLC 1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols: 0.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Solid state auto switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed above, refer to page 45 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. For the D-P3DW, refer to the uto Switch Guide. The D-9 /M9 /P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-9 /M9 before shipment.) The D-P3DW is mountable only on Ø 3. Relay, PLC

23 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K -X -XC3 -XC6 -XC7 Double acting, ir cushion Specifications Change of rod end shape Special port location Piston rod and rod end nut made of stainless steel Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel -XC8 djustable stroke cylinder/djustable extension type -XC9 djustable stroke cylinder/djustable retraction type -XC10 Dual stroke cylinder/double rod type -XC14 Change of trunnion bracket mounting position -XC7 Made to Order (For details, refer to pages 47 to 61.) Double clevis and double knuckle joint pins made of stainless steel -XC30 Rod trunnion ll Made-to-Order products have the same cover shapes as the existing products. Refer to pages 38 to 44 for cylinders with auto switches uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting uto switch mounting brackets/part no. Operating range Specifications ction Double acting, Single rod Fluid ir Proof pressure 1.5 MPa Maximum operating pressure 1.0 MPa Minimum operating pressure 0.05 MPa mbient and fluid temperature Lubricant Piston speed Without auto switch: 10 to 70 C (No freezing) With auto switch: 10 to 60 C Non-lube 50 to 1000 mm/s Stroke length tolerance Up to 50: , 51 to 1000: , 1001 to 1500: Cushion Note) ir cushion or Rubber bumper Port size 1/8 1/4 3/8 1/ Mounting asic, xial foot, Rod flange, ead flange, Single clevis, Double clevis, Centre trunnion Non-rotating accuracy ±0.5 ±0.5 ±0.3 llowable rotating torque [N m or less] Note) Kinetic energy absorbable by the cushion mechanism is identical to double acting single rod. Strokes ccessories Option Mounting asic xial foot Rod flange ead flange Single clevis Double clevis Centre trunnion Rod end nut Clevis pin Single knuckle joint Double knuckle joint (with pin) stroke 3 5, 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, 800 Manufacture of intermediate strokes is possible. (Spacers are not used.) Rod boot Rod oot Material Material Max. ambient temp. J Nylon tarpaulin 70 C K eat resistant tarpaulin 110 C Max. ambient temperature for rod boot itself. With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W

24 Series K Mounting rackets/part No xial foot Note 1) -L03 -L04 -L05 -L06 -L08 -L10 Rod/ead fl ange -F03 -F04 -F05 -F06 -F08 -F10 Single clevis -C03 -C04 -C05 -C06 -C08 -C10 Double clevis -D03 -D04 -D05 -D06 -D08 -D10 Note 1) Order two foots per cylinder. Note ) ccessories for each mounting bracket are as follows. xial foot, Rod/ead fl ange, Single clevis/ody mounting bolt; Double clevis/ody mounting bolt, Clevis pin, Flat washers and Split pins. Refer to page 14 for details. Theoretical Force OUT side is identical to double acting single rod. Refer to the table below for IN side. Piston area (mm ) Theoretical force [N] = Pressure [MPa] x Piston area [mm ] Weights [kg] asic xial foot asic weight Rod/ead flange Single clevis Double clevis Centre trunnion dditional weight per 50 mm of stroke ll mounting brackets Single knuckle joint ccessories Double knuckle joint (with pin) Calculation Example) K3-100 (asic, ø 3, 100 stroke) asic weight 0.50 (asic, ø 3) dditional weight 0.11/50 stroke Cylinder stroke 100 stroke x 100/50 = 0.7 kg 3

25 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Construction ' Component Parts Width across flats 1!6!9!5iq r ye@3@0t!7@!8wu!4!3!!1 No. Description Material Note 1 Rod cover luminium die-cast Metallic painted ead cover luminium die-cast Metallic painted 3 Cylinder tube luminium alloy ard nodised 4 Piston rod Stainless steel 5 Piston luminium alloy Chromated 6 Cushion ring Rolled steel 7 Cushion ring Rolled steel 8 Non-rotating guide bearing Oil-impregnated sintered alloy 9 Cushion valve Steel wire Trivalent zinc chromated 10 Retaining ring Steel for spring ø 40 to ø Tie rod Carbon steel Trivalent zinc chromated 1 Tie rod nut Carbon steel Trivalent zinc chromated Replacement Parts/Seal Kit Kit no. 3 K3-PS 40 K40-PS 50 K50-PS 63 K63-PS 80 K80-PS 100 K100-PS Cushion valve C WV C øe Port!0o@1 Model without air cushion is designed to include rubber bumpers. The overall length is longer than the cylinder with air cushion as follows because the bumpers are attached to the both sides of the piston; ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm Without Mounting racket asic: () Rod view Contents Set of MM G x P G 1 L M F N x 4 x J S + Stroke ZZ + Stroke : Only K3 L 1 C E F G 1 M J MM N P S V W ZZ M6 x 1 M10 x / M6 x 1 M14 x / M8 x 1.5 M18 x / M8 x 1.5 M18 x / M10 x 1.5 M x / M10 x 1.5 M6 x / Dimensions with mounting support is same as the basic type (double acting, single rod). lso dimensions with boot is same as the basic type (double acting, single rod). N Width across flats Rod view -' No. Description Material Note 13 Piston nut Rolled steel 14 Washer Steel wire 15 Lock nut Steel wire 16 Rod end nut Carbon steel Trivalent zinc chromated 17 Wear ring Resin 18 Cushion seal Urethane 19 Rod seal NR 0 Piston seal NR 1 Cushion valve seal NR Cylinder tube gasket NR 3 Piston gasket NR Seal kits consist and can be ordered by using the seal kit number corresponding to each bore size. Seal kit includes a grease pack (ø 3 to 50: 10 g, ø 63, 80: 0 g, ø 100: 30 g). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-00 (0 g) 4 With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W

26 ir Cylinder: Non-rotating Rod Type Double cting, Double Rod Series KW ø 3, ø 40, ø 50, ø 63, ø 80, ø 100 Non-rotating rod type Double rod Mounting style asic/without bracket L xial foot F Rod fl ange G ead fl ange T Centre trunnion Type Solid state auto switch Reed auto switch DIN terminal 44 Relay, Diagnostic indication (-colour indication) Grommet 59W PLC 1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Solid state auto switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed above, refer to page 45 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. For the D-P3DW, refer to the uto Switch Guide. The D-9 /M9 /P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-9 /M9 before shipment.) The D-P3DW is mountable only on Ø 3. 5 Special function Diagnostic indication (-colour indication) Water resistant (-colour indication) Electrical entry Indicator light Wiring (Output) Load voltage uto switch model Lead wire length (m) DC C Tie-rod mounting Pre-wired connector and mounting ( ) (M) (L) (Z) M9N pplicable load 3-wire (NPN) Grommet 3-wire (PNP) 4 V 5 V, 1 V M9P IC circuit -wire 1 V M9 Terminal 3-wire (NPN) 5 V, 1 V G39 conduit -wire 1 V K39 3-wire (NPN) M9NW 5 V, 1 V 3-wire (PNP) M9PW IC circuit Yes -wire 1 V M9W 3-wire (NPN) M9N 1 4 V 5 V, 1 V IC circuit 3-wire (PNP) M9P 1 Grommet -wire 1 V M9 1 Diagnostic output (-colour indication) 4-wire (NPN) 5 V, 1 V F59F IC circuit P3DW Magnetic field resistant -wire P3DW (-colour indication) (Non-polar) P4DW 3-wire Yes (Equiv. to NPN) 5 V 96 IC circuit 100 V 93 KW MDKW With auto switch (uilt-in magnet) With auto switch L L M9W Suffix (Cushion) ir cushion N Rubber bumper Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm. 3 3 mm mm mm uilt-in Magnet Cylinder Model mm Port thread type Suffix (Rod boot) mm Rc If a built-in magnet cylinder without an None mm TN NPT auto switch is required, there is no need J Nylon tarpaulin (one end) TF G to enter the symbol for the auto switch. JJ Nylon tarpaulin (both ends) (Example) MDK K eat resistant tarpaulin (one end) Cylinder stroke Refer to " Strokes" on page 6. KK eat resistant tarpaulin (both ends) pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Lead wire length symbols: Number of auto switches pcs. S 1 pc. 3 3 pcs. n n pcs. uto switch Without auto switch For applicable auto switches, refer to the table below. Made to Order For details, refer to page 6. Grommet No 100 V or less 90 IC circuit Relay, Yes 100 V, 00 V 54 PLC No 1 V 00 V or less 64 -wire 4 V Terminal 33 conduit 34 PLC Yes 100 V, 00 V 0.5 m (Example) M9NW 1 m M (Example) M9NWM ow to Order 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Relay, PLC

27 ir Cylinder: Non-rotating Rod Type Double cting, Double Rod Series KW -XC3 -XC6 Double acting Made to Order (For details, refer to pages 47 to 61.) Specifi cations Special port location Piston rod and rod end nut made of stainless steel Tie-rod, cushion valve, tie-rod nut, etc. -XC7 made of stainless steel -XC30 Rod trunnion ll Made-to-Order products have the same cover shapes as the existing products. Refer to pages 38 to 44 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting uto switch mounting brackets/part no. Operating range Specifications ction Fluid Proof pressure Note) Kinetic energy absorbable by cushion mechanism is identical to double acting single rod. ccessories Rod oot Material Mounting asic xial foot Material Max. ambient temp. J Nylon tarpaulin 70 C K eat resistant tarpaulin 110 C Max. ambient temperature for rod boot itself. Rod/ead fl ange Centre trunnion Rod end nut Option Max. operating pressure Min. operating pressure mbient and fluid temperature Lubrication Operating piston speed Double acting, Double rod Single knuckle joint Double knuckle joint (with pin) Rod boot ir 1.5 MPa 1.0 MPa 0.05 MPa Without auto switch: 10 to 70 C (No freezing) With auto switch: 10 to 60 C Non-lube 50 to 1000 mm/s llowable stroke tolerance Up to 50: , 51 to 800: Cushion Note) ir cushion or Rubber bumper Port size (Rc, NPT, G) 1/8 1/4 3/8 1/ Mounting asic, xial foot, Rod fl ange, ead fl ange, Centre trunnion Non-rotating accuracy ±0.5 ±0.5 ±0.3 llowable rotating torque [N m or less] Strokes 3 5, 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, 800 Manufacture of intermediate strokes is possible. (Spacers are not used.) Mounting rackets/part No. stroke With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W xial foot -L03 -L04 -L05 -L06 -L08 -L10 Rod/ead fl ange -F03 -F04 -F05 -F06 -F08 -F10 Note) Order two foots per cylinder. 6

28 Series KW Theoretical Force Weights/luminium Tube Construction (Unit: N) Note) Theoretical force [N] = Pressure [MPa] x Piston area [mm ] OUT IN Rod dia. Operating Piston area Operating pressure [MPa] Width across fl ats direction [mm ] OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN [kg] asic asic weight xial foot Rod/ead fl ange Centre trunnion dditional weight per 50 mm of stroke ll mounting brackets ccessories Single knuckle joint Double knuckle joint (with pin) Calculation Example) KW3-100 (asic, ø 3, 100 st) asic weight 0.54 (asic, ø 3) dditional weight 0.1/50 stroke x 100/50 = 0.78 kg!3 r!6!4 uq@0 wy@1 t!8!5 i!7 e!0 o!9 Width across flats Rod view Component Parts 7!!1 No. Description Material Note 1 Rod cover luminium die-cast Metallic painted Cylinder tube luminium alloy ard nodised 3 Piston rod Carbon steel ard chrome plating 4 Piston rod Stainless steel 5 Piston luminium alloy Chromated 6 Cushion ring luminium alloy nodised 7 Non-rotating guide bearing Oil-impregnated sintered alloy 8 ushing earing alloy 9 Cushion valve Steel wire Trivalent zinc chromated 10 Retaining ring Steel for spring ø 40 to ø Tie rod Carbon steel Trivalent zinc chromated 1 Tie rod nut Carbon steel Trivalent zinc chromated 13 Rod end nut Carbon steel Trivalent zinc chromated 14 Lock nut Steel wire 15 Cushion seal Urethane 16 Rod seal NR 17 Rod seal NR 18 Piston seal NR 19 Cushion valve seal NR No. Description Material Note 0 Cylinder tube gasket NR 1 Piston gasket NR Replacement Parts/Seal Kit Kit no. 3 KW3PS 40 KW40PS 50 KW50PS 63 KW63PS 80 KW80PS Contents Set of the 100 KW100PS Seal kits consist of and can be ordered by using the seal kit number corresponding to each bore size. Trunnion type should not be disassembled. (Refer to page 6.) Seal kit includes a grease pack (ø 3 to 50: 10 g, ø 63, 80: 0 g, ø 100, 15: 30 g). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-00 (0 g)

29 ir Cylinder: Non-rotating Rod Type Double cting, Double Rod Series KW Without Mounting racket asic: () Width across flats 1 Rod view Port V C W Cushion valve C MM øee11 G L M F N Positional relationship between port and cushion valve Port Cushion valve x Rc P x 4 x J N S + Stroke ZZ + Stroke L 1 K C D E F G 1 M J M6 x M6 x M8 x M8 x M10 x M10 x 1.5 K MM N P S V W ZZ 3 6 M10 x / M14 x / M18 x / M18 x / M x / M6 x / G F Width across flats K øee11 ød L K + Stroke MM With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W Model without air cushion is designed to include rubber bumpers. The overall length is longer than the cylinder with air cushion as follows because the bumpers are attached to the both sides of the piston; ø 3, ø 40: +6 mm, ø 50, ø 63: +8 mm, ø 80, ø 100: +10 mm The dimensions for each mounting type are the same as those for the standard double acting double rod model. Refer to pages 19 and 0. 8

30 ir Cylinder: With End Lock Series ø 3, ø 40, ø 50, ø 63, ø 80, ø 100 ow to Order With auto switch L F G C D T With auto switch (uilt-in magnet) Mounting style asic/without bracket xial foot Rod flange ead flange Single clevis Double clevis Centre trunnion uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) MD MD L L mm mm mm mm mm mm Port thread type Rc TN NPT TF G Cylinder stroke Refer to Strokes on page N N Manual release N Non-locking L Locking Locking position Locking at head end R Locking at rod end W Locking at both ends Suffix (Rod boot) None J Nylon tarpaulin K eat resistant tarpaulin M9W Made to Order For details, refer to page 30. Number of auto switches pcs. S 1 pc. 3 3 pcs. n n pcs. uto switch Without auto switch For applicable auto switches, refer to the table below. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Solid state auto switch Reed auto switch 1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Solid state auto switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed above, refer to page 45 for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. For the D-P3DW, refer to theuto Switch Guide. The D-9 /M9 /P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-9 /M9 before shipment.) The D-P3DW is mountable only on Ø 3. 9 Special function Diagnostic indication (-colour indication) Water resistant (-colour indication) Electrical entry Indicator light Wiring (Output) Load voltage uto switch model Lead wire length (m) DC C Tie-rod mounting Pre-wired connector and mounting ( ) (M) (L) (Z) M9N pplicable load 3-wire (NPN) Grommet 3-wire (PNP) 4 V 5 V, 1 V M9P IC circuit -wire 1 V M9 Terminal 3-wire (NPN) 5 V, 1 V G39 conduit -wire 1 V K39 3-wire (NPN) M9NW 5 V, 1 V 3-wire (PNP) M9PW IC circuit Yes -wire 1V M9W 3-wire (NPN) M9N 1 4 V 5 V, 1 V IC circuit 3-wire (PNP) M9P 1 Grommet -wire 1 V M9 1 Diagnostic output (-colour indication) 4-wire (NPN) 5 V, 1 V F59F IC circuit P3DW Magnetic field resistant -wire P3DW (-colour indication) (Non-polar) P4DW 3-wire 5 V 96 IC circuit Yes (Equiv. to NPN) 100 V 93 Grommet No 100 V or less 90 IC circuit Relay, Yes 100 V, 00 V 54 PLC No 1 V 00 V or less 64 -wire 4 V Terminal 33 conduit 34 PLC Yes 100 V, 00 V DIN terminal 44 Relay, Diagnostic indication (-colour indication) Grommet 59W PLC Lead wire length symbols: 0.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Relay, PLC

31 ir Cylinder: With End Lock Series ir cushion Made to Order (For details, refer to pages 47 to 61.) Specifications -X Change of rod end shape Tie-rod, cushion valve, tie-rod nut, etc. -XC7 made of stainless steel -XC10 Dual stroke cylinder/double rod type -XC14 Change of trunnion bracket mounting position Double clevis and double knuckle joint -XC7 pins made of stainless steel -XC9 Double knuckle joint with spring pin -XC30 Rod trunnion ll Made-to-Order products have the same cover shapes as the existing products. Refer to pages 38 to 44 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting uto switch mounting brackets/part no. Operating range Specifications ction Double acting, Single rod Fluid ir Proof pressure 1.5 MPa Max. operating pressure 1.0 MPa Min. operating pressure 0.15 MPa mbient and fluid temperature Without auto switch: 10 to 70 C (No freezing) With auto switch: 10 to 60 C Lubrication Non-lube Operating piston speed 50 to 1000 mm/s llowable stroke tolerance Up to 50: , 51 to 1000:+1.4 0,1001 to 1500: Cushion ir cushion Port size (Rc, NPT, G) 1/8 1/4 3/8 1/ Mounting 0.05 MPa except locking parts Locking Specifications Locking position olding force (Max.) N ack lash Manual release Strokes Intermediate strokes are available. (No spacer is used.) ccessories stroke 3 5, 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 15, 150, 175, 00, 50, 300, 350, 400, 450, 500, 600, 700, 800 Mounting ead end, Rod end, oth ends ø 3 ø 40 ø 50 ø 63 ø 80 ø asic asic, xial foot, Rod flange, ead flange, Single clevis, Double clevis, Centre trunnion xial foot 1.5 mm or less Non-locking type, Locking type Rod flange ead flange Single clevis Double clevis Centre trunnion Rod end nut With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W Clevis pin Locking release bolt (N type only) Single knuckle joint Option Double knuckle joint (with pin) Rod boot 30

32 Series Weights/luminium Tube asic weight [kg] dditional weight per 50 mm of stroke ccessories asic xial foot Rod/ead flange Single clevis Double clevis Centre trunnion ll mounting brackets Single knuckle joint Double knuckle joint (with pin) dditional Weight of Locking Part [kg] Locking at head end () Manual release non-locking [N] Locking at rod end (R) Locking at both ends (W) Locking at head end () Manual release locking (L) Locking at rod end (R) Locking at both ends (W) Calculation Example) L3-100-N asic weight 0.68 dditional weight 0.11/50 stroke Cylinder stroke 100 stroke Locking weight 0.08 (Locking at head end, manual release non-locking type) x 100/ = 0.98 kg Mounting rackets/part No xial foot Note 1) -L03 -L04 -L05 -L06 -L08 -L10 Rod/ead flange -F03 -F04 -F05 -F06 -F08 -F10 Single clevis -C03 -C04 -C05 -C06 -C08 -C10 Double clevis -D03 -D04 -D05 -D06 -D08 -D10 Note 1) Order two foots per cylinder. Note ) ccessories for each mounting bracket are as follows. xial foot, Rod/ead flange, Single clevis/ody mounting bolt; Double clevis/ ody mounting bolt, Clevis pins, Flat washer and Split pins. Refer to page 14 for details. 31

33 ir Cylinder: With End Lock Series Cautions for Using 1. Use recommended pneumatic circuit. Caution For correct operation of locking or releasing mechanism, use the following pneumatic circuit. W With locking at head end With locking at rod end q Do not use a 3-position solenoid valve. void using circuit with 3-position solenoid valve (especially closed centre, metal seal type). When pressure is trapped in the port with locking mechanism, end lock is free. When utilizing a 3-position closed centre valve, even if the lock is engaged, it may become unlocked due to pressure leakage either across the piston or the valve spool. w ack pressure is required to release lock. efore starting operation, supply air to side without locking mechanism as figure above, (or side without locking the piston rod for models with locking at both ends.) Otherwise, lock may not be released. (Refer to Release of lock.) e Release lock when mounting or adjusting the cylinder. If mounting is done with lock engaged, lock may be damaged.. Operating pressure Caution W r Use with load 50 % or less of rated capacity. If cylinder is used over 50 % load capacity, lock may be damaged. t Do not use multiple cylinders synchronously. void using or more end lock cylinders synchronously to perform a single task because one of the cylinders may not allow lock to release. y Use a speed controller as meter-out. Meter-in control may not allow lock to release. u Use complete stroke or cylinder at side with lock. If cylinder piston does not reach end of stroke, lock may not be engaged or released. Use pressures 0.15 MPa or more at port with locking mechanism. Otherwise, lock will not be released. 4. Relationship with cushion Caution When cushion valve at side with locking mechanism is fully closed or nearly fully closed, piston rod may not reach the stroke end. Thus lock is not established. nd when locking is done with the cushion valve nearly fully closed, adjust the cushion valve since lock may not be released. 5. Release of lock Warning When lock is to be released, supply air pressure to the port without the locking mechanism, this relieves the load from the lock mechanism. (Refer to recommended pneumatic circuit.) When port without lock mechanism is exhausted and locking mechanism is loaded, the lock may be damaged due to excessive force on lock during release. lso, piston rod will operate immediately. 6. Manual release Caution Non-locking type Insert attached bolt from upper side of rubber cover (no need to remove rubber cover), tighten locking piston and pull bolt, lock will be released. When bolt is released, locking begins to take place. Thread size, required pulling force and stroke are listed below. Thread size Pulling force Stroke 3 M.5 x 0.45 x 5 L 4.9 N 40, 50, 63 M3 x 0.5 x 30 L 10 N 3 80, 100 M5 x 0.8 x 40 L 4.5 N 3 Remove bolt under normal operations. It may cause malfunction of locking and release. Lock Release Rubber cover Locking type Turn 90 counterclockwise while pushing the M/O knob. Lock is released when on the cap and OFF mark on the M/O knob correspond. (Lock remains released.) When locking is desired, turn 90 clockwise while fully pushing the M/O knob and correspond on the cap and ON mark on the M/O knob. Confirm the correct position by click sound click. Otherwise, lock may not be engaged. With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W 3. Exhaust speed Caution When pressures at port with locking mechanism is decreased to 0.05 MPa or less, it is automatically locked. When exhaust pipe at port with locking mechanism is thin and long or speed controller is distanced from cylinder port, exhaust speed is slow and will require additional time for lock engagement. Clogging the silencer mounted on exhaust port of solenoid valve leads to the same result. Locked Released 3

34 Series Construction Locking at head end Manual release non-locking type: #e y!6 @7 i o ø 80, ø 100!1!0 Locking at rod end 14 Manual release locking type: L Component Parts No. Description Material Note 1 Rod cover luminium alloy Metallic painted ead cover luminium alloy Metallic painted 3 Cylinder tube luminium alloy ard nodised 4 Piston rod Carbon steel ard chrome plating 5 Piston luminium alloy Chromated 6 Cushion ring luminium alloy nodised 7 ushing earing alloy 8 Cushion valve Steel wire Trivalent zinc chromated 9 Retaining ring Steel for spring ø 40 to ø Tie rod Carbon steel Trivalent zinc chromated 11 Tie rod nut Carbon steel Trivalent zinc chromated 1 Wear ring Resin 13 Rod end nut Carbon steel Trivalent zinc chromated 14 Cover luminium alloy Painted black 14 Cover Carbon steel Tufftride 15 Rubber cover Synthetic rubber 16 Piston holder Urethane Replacement Parts/Seal Kit (Locking at head or rod end) Kit no. Contents 3 3-PS PS PS Set of the nos. 63 #0, #1, #, # PS PS Seal kits consist of to #3, and can be ordered by using the seal kit number corresponding to each bore size. Trunnion type should not be disassembled. (Refer to page 6.) Seal kit includes a grease pack (ø 3 to 50: 10 g, ø 63, 80: 0 g, ø 100: 30 g). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-00 (0 g) 33 Component Parts No. Description Material Note 17 Lock spring Steel wire 18 umper Urethane 19 Lock piston Carbon steel ardened, ard chrome plating 0 Lock bushing Copper allow 1 olt with hex. hole lloyed steel lack zinc chromated M/O knob Zinc alloy Painted black 3 M/O bolt lloyed steel lack zinc chromated, Painted red 4 M/O spring Steel wire Zinc chromated 5 Stopper ring Carbon steel Zinc chromated 6 Seal retainer Rolled steel ø 80, ø 100 only 7 Cushion valve seal NR 8 Piston gasket NR 9 Cushion seal Urethane 30 Rod seal NR 31 Piston seal NR 3 Cylinder tube gasket NR 33 Lock piston seal NR Replacement Parts/Seal Kit (Locking at both ends) Kit no. Contents 3 3-PS-W PS-W PS-W Set of the nos. 63 #0, #1, #, # PS-W PS-W

35 ir Cylinder: With End Lock Series asic: () Locking at head end: Manual release locking type: L N ømo Manual release non-locking type: N W V Port C Cushion valve C Port thread type MM MO N N P RF S V W WL ZZ 3 M10 x / M14 x / M18 x / M18 x / M x / M6 x / R ørf øe ød Stroke MM 1 Width across flats K Locking at rod end: Port thread type Stroke Locking at both ends: Port thread type Stroke L S ZZ K M F G N x P x 4 x J S + Stroke ZZ + Stroke - /-R L K C D DL E F G G 1 R N J K LL M M6 x M6 x M8 x M8 x M10 x M10 x W R W WL LL DL N G øe With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W 34

36 Series With Mounting racket xial foot: (L) / Locking at head end: (- ) Cushion valve Port LY L 4 x øld LX LZ Y X - /-R LS + Stroke ZZ + Stroke X Y X Y LD L LS LT LX LY LZ ZZ W LS ZZ Rod flange: (F) / Locking at head end: (- ) Cushion valve 4 x øfd Port F FY øfd FX FZ ead flange: (G) / Locking at head end: (- ) FE FT - /-R /-W F FD FE FT FX FY FZ Fd Cushion valve 4 x øfd Port F FY FX FZ ZZ + Stroke FT 35 - /-R F FD FT FX FY FZ ZZ W ZZ

37 ir Cylinder: With End Lock Series With Mounting racket Single clevis: (C) / Locking at head end: (- ) Cushion valve Port Double clevis: (D) / Locking at head end: (- ) Cushion valve CX CZ CX Port Centre trunnion: (T) / Locking at head end: (- ) TY øtde8 Cushion valve TX TZ Port - /-R - /-R Z + 1/ stroke Z + Stroke ZZ + Stroke Z + Stroke ZZ + Stroke TT U L CD10 RR L RR U CD10 CX Z ZZ U L CD10 L RR U CD10 CX CZ Z ZZ TDe8 TT TX TY TZ Z RR -R /-W Z W Z ZZ W Z ZZ With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Made to Order uto Switch KW K W

38 37

39 Series uto Switch Mounting uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight <and mounting> D-G39/K39/3 t D-44 t s s uto switch uto switch <Tie-rod mounting> D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-9 /9 V t t t s D-5 /6 D-59W s D-F5 /J59 D-F5 W/J59W/F5 D-F59F/F5NT s D-Y59 /Y69 /Y7P/Y7PV D-Y7 W/Y7 WV/Y7 D-Z7 /Z80 uto switch uto switch uto switch With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod W D-P3DW D-P3DW s uto switch t D-P4DW s uto switch t K KW uto Switch Made to Order 38

40 Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight uto Switch Proper Mounting Position ( type) ore size uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V D-9 D-9 V D-F5 D-J59 D-F59F D-F5NT D-5 D-6 D-59W D-G39 D-K39 D-3 D-44 D-Y59 D-Y69 D-Y7P D-Y7PV D-Y7 D-Y7 W D-Y7 WV D-Z7 D-Z8 D-P3DW D-P3DW Note ) Models with rubber bumper have different dimensions for auto switch proper mounting positions ( and ). dd the following values to both and : 3 mm (ø 3 and 40), 4 mm (ø 50 and 63), 5 mm (ø 80 and 100), 6 mm (ø 15). Note 1) djust the auto switch after confirming the operating conditions in the actual setting. Note ) The D-P3DW is mountable only on ø 3. D-P4DW uto Switch Proper Mounting eight ( type) ore size uto switch model D-M9 D-M9 W D-M9 D-9 D-9 V D-M9 V D-M9 WV D-M9 V D-F5 D-J59 D-F59F D-F5 W D-J59W D-F5 D-F5NT D-5 D-6 D-59W D-G39 D-K39 D-3 D-44 D-Y59 D-Y7P D-Y7 W D-Y7 D-Z7 D-Z80 D-Y69 D-Y7PV D-Y7 WV D-P3DW D-P3DW Note 1) D-P4DW s t s t s t s t s t s t s t s t s t s t s t Note 1) The D-P3DW is mountable only on ø 3. 39

41 uto Switch Mounting Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight uto Switch Proper Mounting Position (Non-rotating rod type, With end lock) ore size uto Switch Proper Mounting eight (Non-rotating rod type, With end lock) ore size uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V uto switch model D-M9 D-M9 W D-M9 D-9 D-9 D-9 V Models with rubber bumper have different dimensions for auto switch proper mounting positions ( and ). dd the following values to both and : 3 mm (ø 3 and 40), 4 mm (ø 50 and 63), 5 mm (ø 80 and 100). Note 1) djust the auto switch after confirming the operating conditions in the actual setting. Note ) The D-P3DW is mountable only on ø 3. D-9 V D-F5 D-J59 D-F59F D-M9 V D-M9 WV D-M9 V D-F5NT D-F5 D-J59 D-F59F D-F5 W D-J59W D-F5 D-F5NT D-5 D-6 D-5 D-6 D-59W D-59W D-G39 D-K39 D-3 D-G39 D-K39 D-3 D-44 D-44 D-Y59 D-Y69 D-Y7P D-Y7PV D-Y7 D-Y7 W D-Y7 WV D-Z7 D-Z8 D-Y59 D-Y7P D-Y7 W D-Y7 D-Z7 D-Z80 D-P3DW D-P3DW Note ) D-Y69 D-Y7PV D-Y7 WV D-P4DW D-P3DW D-P3DW Note 1) D-P4DW s t s t s t s t s t s t s t s t s t s t s t Note 1) The D-P3DW is mountable only on ø 3. Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod With End Lock W K KW Made to Order uto Switch 40

42 Series Minimum Stroke for uto Switch Mounting Mounting rackets Except Centre Trunnion uto switch model D-M9 D-M9 W D-M9 V D-M9 WV D-M9 D-M9 V D-9 D-9 V D-G39 D-K39 D-3 D-44 D-F5 D-J59 D-F5 W D-J59W D-F5 D-F59F D-5 D-6 D-59W D-F5NT D-Y59 D-Y7P D-Y7 W D-Z7 D-Z80 Number of auto switches (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n n: Number of auto switches Mounting brackets except centre trunnion ø 3, ø 40, ø 50, ø 63 ø 80, ø 100 ø 15 Note 1) When n is an odd number, an even number that is one larger than this odd number is used for the calculation (n ) (n =, 4, 6, 8 ) Note 1) 10 (n ) (n =, 4, 6, 8 ) Note 1) 15 (n ) (n =, 4, 6, 8 ) Note 1) 15 (n ) (n =, 4, 6, 8 ) Note 1) 15 (n ) (n =, 4, 6, 8 ) Note 1) 10 (n ) (n =, 4, 6, 8 ) Note 1) (Different surfaces) 35 (Same surface) 100 n (Different surfaces) (n ) (n =, 3, 4 ) n (Same surface) (n ) (n =, 3, 4 ) 1 10 (Different surfaces) 35 (Same surface) 55 n (Different surfaces) (n ) (n =, 3, 4 ) n (Same surface) (n ) (n =, 3, 4 ) 1 10 (Different surfaces, same surface) n (Same surface) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (Different surfaces, same surface) n (Different surfaces) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (Different surfaces, same surface) (n ) (n ) (n ) n (Same surface) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (Different surfaces, same surface) n (Same surface) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (Different surfaces, same surface) 1 15 n (n ) (n =, 4, 6, 8 ) Note 1)

43 uto Switch Mounting Series Minimum Stroke for uto Switch Mounting Mounting rackets Except Centre Trunnion uto switch model D-Y69 D-Y7PV D-Y7 WV D-Y7 D-P3DW D-P4DW Note 1) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. Mounting rackets Except Centre Trunnion (Non-rotating rod type, With end lock) uto switch model D-P3DW Note 1) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. Centre Trunnion uto switch model D-M9 D-M9 W D-M9 V D-M9 WV D-M9 D-M9 V D-9 D-9 V Number of auto switches (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n Number of auto switches ø 3, ø 40 Mounting brackets except centre trunnion ø 50, ø 63 ø 80, ø 100 ø 15 (Different surfaces), (Same surface) n (Different surfaces) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) n (Same surface) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) Number of auto switches (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n (Different surfaces, same surface) 1 n Note ) When n is an odd number, a multiple of 4 that is larger than this odd number is used for the calculation. n: Number of auto switches Mounting brackets except centre trunnion ø 3, ø 40 ø 50, ø 63 ø 80, ø 100 ø (n ) (n =, 4, 6, 8 ) Note 1) 0 (n ) (n =, 4, 6, 8 ) Note 1) (Different surfaces), 1 5 (Same surface) 45 5 n (Different surfaces) n (Same surface) (Different surfaces, same surface) 1 n (n ) (n =, 4, 6, 8 ) Note 1) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) 15 0 (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) n: Number of auto switches n: Number of auto switches Centre trunnion ø 3 ø 40 ø 50 ø 63 ø 80 ø 100 ø (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) 4 Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod With End Lock W K KW uto Switch Made to Order

44 Series Minimum Stroke for uto Switch Mounting Centre Trunnion uto switch model D-G39 D-K39 D-3 D-44 D-F5 /J59 D-F5 W D-J59W D-F5 D-F59F D-F5NT D-5 D-6 D-59W D-Y59 D-Y7P D-Y7 W D-Z7 D-Z80 D-Y69 D-Y7PV D-Y7 WV D-Y7 D-P3DW D-P3DW D-P4DW Note 1) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. Note ) When n is an odd number, a multiple of 4 that is larger than this odd number is used for the calculation. n: Number of auto switches (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) 4) Number of auto Centre trunnion switches ø 3 ø 40 ø 50 ø 63 ø 80 ø 100 ø 15 (Different surfaces) (Same surface) n (Different surfaces) (n ) (n ) (n ) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) n (Same surface) (n ) (n ) (n ) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (Different surfaces) (Same surface) n (Different surfaces) (n ) (n ) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) n (Same surface) (n ) (n ) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (n =, 4, 6, 8 ) Note 1) (Different surfaces, same surface) n (Same surface) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) n (Same surface) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) n (Same surface) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) n (Same surface) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) n (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) n (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) n (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) (n 4) (n 4) (n 4) (n n (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) 1 80 n (n 4) (n = 4, 8, 1, 16 ) Note ) (Different surfaces, same surface) n (n 4) (n 4) (n 4) (n 4) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) (n = 4, 8, 1, 16 ) Note ) 43

45 uto Switch Mounting Series uto Switch Mounting rackets/part No. uto switch model D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-9 /9 V D-3 /44 D-G39/K39 D-F5 /J59 D-F5 W/J59W D-F59F/F5 D-F5NT ø 3 ø 40 ø 50 ø 63 ø 80 ø 100 ø S1-15 T-03 T-03 T-05 T-05 T-06 T-06 T-08 D-5 /6 /59W D-P3DW S S S S S S D-P3DW 9-03S D-P4DW 3T-040 3T-040 3T-050 3T-050 3T-080 3T-080 PT-080 D-Y59 /Y69 D-Y7P/Y7PV D-Y7 W/Y7 WV D-Y7 D-Z7 /Z [Stainless Steel Mounting Screw] The following stainless steel mounting screw kit (including set screws) is available. Use it in accordance with the operating environment. (Since the auto switch mounting bracket is not included, order it separately.) 1: For D-5/6/F5/J5 types Note 1) Refer to the uto Switch Guide for details on the 1. The above stainless steel screws are used when a cylinder is shipped with the D-F5 auto switch. When only one auto switch is shipped independently, the 1 is attached. Note ) When using the D-M9 (V) or Y7, do not use the steel set screws which are included with the auto switch mounting brackets above (5-03, 7-, 4-, 4- ). Order a stainless steel screw kit (1) separately, and use the M4 x 6 L stainless steel set screws included in the 1. Operating Range uto switch model D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-Y59 /Y69 D-Y7P/Y7 V D-Y7 W/Y7 WV D-Y7 D-F5 /J59 D-F5 W/J59W D-F5/F5NT D-F59F D-G39/K D-P3DW D-P3DW 4.5 D-P4DW D-9 /9 V D-Z7 /Z D-5 / D-59W D-3 / Values which include hysteresis are for guideline purposes only, they are not a guarantee (assuming approximately ±30 % dispersion) and may change substantially depending on the ambient environment. The figure shows the mounting example for the D-M9 (V)/M9 W(V)/ M9 (V)/9 (V). With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod W K KW Made to Order uto Switch 44

46 Series Other than the applicable auto switches listed in ow to Order, the following auto switches are mountable. Refer to the uto Switch Guide for the detailed specifications. Type Model Electrical entry Features D-M9NV/M9PV/M9V D-Y69/Y69/Y7PV D-M9NWV/M9PWV/M9WV Diagnostic indication Grommet (Perpendicular) D-Y7NWV/Y7PWV/Y7WV (-colour indication) D-M9NV/M9PV/M9V Water resistant (-colour indication) D-P4DW Magnetic field resistant (-colour indication) Solid state D-F59/F5P/J59 D-Y59/Y59/Y7P D-Y7 D-F59W/F5PW/J59W Diagnostic indication Grommet (In-line) D-Y7NW/Y7PW/Y7W (-colour indication) D-F5/Y7 Water resistant (-colour indication) D-F5NT With timer D-P5DW Magnetic field resistant (-colour indication) Reed D-93V/96V Grommet (Perpendicular) D-90V Without indicator light D-53/56/Z73/Z76 Grommet (In-line) D-67/Z80 Without indicator light With pre-wired connector is also available for solid state switches. For details, refer to the uto Switch Guide. Normally closed (NC = b contact) solid state auto switches (D-F9G/F9/Y7G/Y7) are also available. For details, refer to the uto Switch Guide. 45

47 Prior to Use uto Switch Connection and Example Sink Input Specifications Source Input Specifications 3-wire, NPN uto switch -wire uto switch rown lack lue rown lue Input COM Input COM 3-wire, PNP uto switch (PLC internal circuit) -wire uto switch (PLC internal circuit) rown lack lue rown lue Connect according to the applicable PLC input specifications, as the connection method will vary depending on the PLC input specifi cations. Example of ND (Series) and OR (Parallel) Connection Input COM COM Input (PLC internal circuit) (PLC internal circuit) When using solid state auto switches, ensure the application is set up so the signals for the fi rst 50 ms are invalid. 3-wire ND connection for NPN output 3-wire OR connection for NPN output (Using relays) (Performed with auto switches only) rown Relay rown rown Load lack lack Load uto switch 1 uto switch 1 uto switch 1 lack Load lue lue lue rown rown rown uto switch lack uto switch lack uto switch lack lue lue lue 3-wire ND connection for PNP output 3-wire OR connection for PNP output (Using relays) (Performed with auto switches only) rown rown rown Relay lack lack uto switch 1 uto switch 1 uto switch 1 lack lue lue lue With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod W K KW uto switch rown lack lue Load uto switch rown lack Load lue uto switch rown lack lue Load uto Switch -wire ND connection uto switch 1 uto switch rown lue rown lue Load When two auto switches are connected in series, a load may malfunction because the load voltage will decline when in the ON state. The indicator lights will light up when both of the auto switches are in the ON state. uto switches with load voltage less than 0 V cannot be used. Load voltage at ON = Power supply voltage Residual voltage x pcs. = 4 V 4 V x pcs. = 16 V Example: Power supply is 4 VDC Internal voltage drop in auto switch is 4 V. -wire OR connection uto switch 1 uto switch rown lue rown lue Load (Solid state) When two auto switches are connected in parallel, malfunction may occur because the load voltage will increase when in the OFF state. Load voltage at OFF = Leakage current x pcs. x Load impedance = 1 m x pcs. x 3 kω = 6 V Example: Load impedance is 3 kω. Leakage current from auto switch is 1 m. (Reed) ecause there is no current leakage, the load voltage will not increase when turned OFF. owever, depending on the number of auto switches in the ON state, the indicator lights may sometimes grow dim or not light up, due to the dispersion and reduction of the current fl owing to the auto switches. 46 Made to Order

48 Series Simple Specials/Made to Order Please contact SMC for detailed specifi cations, delivery and prices. Simple Specials -X0 to 30 Change of rod end shape The following special specifi cations can be ordered as a simplifi ed Made-to-Order. There is a specifi cation sheet available on paper and CD-ROM. Please contact your SMC sales representatives if necessary. Specifications ( type) Double acting Single rod Double rod ir Rubber ir ø 3 to ø 100 ø 15 ø 3 to ø 100 ø 15 ø 3 to ø 100 ø 15 -XC14 -X5 Change of trunnion bracket mounting position Made to Order Specifications Oversized rod cylinder Note 1) ( type) Double acting Single rod Double rod ir Rubber ir ø 3 to ø 100 ø 15 ø 3 to ø 100 ø 15 ø 3 to ø 100 ø 15 -X13 -XC3 -XC4 -XC5 -XC6 -XC7 -XC8 -XC9 -XC10 -XC11 -XC1 -XC -XC7 -XC9 -XC30 -XC35 -XC65 -XC68 -X1184 Low Speed Cylinder (5 to 50 m/s) Note 1) Special port location Note 1) With heavy duty scraper eat resistant cylinder (10 to 110 C) Piston rod and rod end nut made of stainless steel Note 1) Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder Fluororubber seal Double clevis and double knuckle joint pins made of stainless steel Double knuckle joint with spring pin Rod trunnion With coil scraper Made of stainless steel (Combination of XC7 and XC68) Made of stainless steel (with hard chrome plated piston rod) Cylinder with heat resistant reed auto switch (10 to 10 C) Note 1) The cover shape is the same as the existing product. Note ) For details, refer to the catalogue in website 47

49 Simple Specials/Made to Order Series ( type) K Note 1) (Non-rotating rod type) Note 1) (With end lock) Double acting Double rod Single rod Double rod Single rod Rubber ir Rubber ir Rubber ir ø 3 to ø 100 ø 15 ( type) K (Non-rotating rod type) (With end lock) Double acting Double rod Single rod Double rod Single rod ir Rubber ir Rubber ir Rubber ir ø 3 to ø 100 ø 15 -X0 to 30 -XC14 -X5 -X13 -XC3 -XC4 -XC5 -XC6 -XC7 -XC8 -XC9 -XC10 -XC11 -XC1 Page Page 49, 50 Page 50 Page Page 51 Page 5 Page 5 Page 53 Page 53 Page 53 Page 54 Page 54 Page 55 Page 56 Page 57 Page 58 With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod W K KW -XC Page 58 -XC7 Page 59 -XC9 -XC30 -XC35 Page 59 Page 59 Page 60 uto Switch -XC65 Page 60 -XC68 Page 60 -X1184 Page 61 Made to Order 48

50 Series Simple Specials These changes are dealt with Simple Specials System. 1 Change of Rod End Shape -X0 to X30 Series ction for change of rod end shape type Double acting, Single rod X0 to 30 Except pivot bracket and rod end bracket W Double acting, Double rod X0 to 30 Except pivot bracket and rod end bracket Non-rotating rod type K Double acting, Single rod X0, 1, 6, 10, 11, 13, 14, 17, 19, 1 With end lock Double acting, Single rod X0 to 30 Note 1. SMC will make appropriate arrangements if no dimension, tolerance, or fi nish instructions are given in the diagram.. dimensions marked with will be as follows to the rod diameter (D). Enter any special dimension you desire. Precautions D 6 D 1 mm 6 < D 5 D mm D > 5 D 4 mm 3. In the case of double rod type and single acting retraction type, enter the dimensions when the rod is retracted. : 0 : 1 : : 3 30 C C0.5 ød 30 T W1 : 4 : 5 : 6 : 7 ørd ørd MM L 30 MM L L L 30 W 30 MM L C0.5 file chamfer C W R sphere TP R sphere ødc 30 T W1 C0.5 ød R sphere C ød 30 MM L ød C ød : 8 : 9 : 10 : 11 : 1 : 13 : 14 : 15 T W1 C : 16 : 17 : 18 : 19 L ød MM 30 MM 30 MM 30 MM 30 C 49

51 Simple Specials Series : 0 : 1 : : 3 MM MM MM L K L ød L MM ød MM L MM L T ød L L K : 4 : 5 : 6 : 7 Description Model ction Note type Double acting, Single rod W Double acting, Double rod Non-rotating rod type K Double acting, Single rod With end lock Double acting, Single rod W T ød MM W MM ød T L : 8 : 9 : 30 Change of Trunnion racket Mounting Position ød 30 L K MM T (Z + 1/ stroke) = Trunnion position for -XC14 C ørd L 30 MM ød The position for mounting the trunnion pivot bracket on the cylinder can be moved from the standard mounting position to any desired position. Precautions 1. Specify Z + 1/ stroke in the case the trunnion bracket position is not -XC14, or trunnion is not a centre trunnion.. SMC will make appropriate arrangements if no dimension, tolerance, or finish instructions are given in the diagram. 3. The possible range of trunnion bracket mounting position is indicated in the table below. 4. Some trunnion mounting positions do not allow auto switch mounting. Please consult with SMC for more information. L 30 W -XC14 Trunnion position for -XC14 Z + 1/ stroke For -XC14 Reference For -XC14 For -XC14 Minimum Maximum (Centre trunnion) Minimum stroke Stroke Stroke / stroke Stroke Stroke / stroke Stroke Stroke / stroke Stroke Stroke / stroke Stroke Stroke / stroke Stroke Stroke / stroke Stroke Stroke / stroke 1 With End Lock Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod W K KW Made to Order uto Switch 50

52 Series Made to Order Please contact SMC for detailed dimensions, specifi cations and lead times. 1 Oversized Rod Cylinder -X5 cylinder that has been made stronger through the use of a piston rod with a larger diameter. It is used for long stroke applications that pose the risk of bending or buckling of the piston rod. (Please contact SMC if a lateral load must be applied to it.) pplicable Series Description Model ction Note type Double acting, Single rod Except ø 15 Note) The cover shape is the same as the existing product. ow to Order Mounting style Stroke X5 Oversized rod cylinder Dimensions (Dimensions other than below are the same as standard type.) Cushion valve W MM Width across flats Width across flats 1 E ød ore size Effective thread length 1 ød 1 K Width across flats MN W ZZ M14 x M18 x M x M x M6 x M30 x Effective thread K ZZ + Stroke eat Resistant Cylinder (10 to 150 C) -X6 ir cylinder which changed the seal material and grease, so that it could be used even at higher temperature up to 150 from 10 C. pplicable Series Description Model ction Note type W Double acting, Single rod Double acting, Double rod Except ø 15, with rubber bumper and with auto switch Except ø 15, with rubber bumper and with auto switch Note 1) Operate without lubrication from a pneumatic system lubricator. Note ) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note 3) In principle, it is impossible to make built-in magnet type and the one with auto switch. ut, as for the one with auto switch, and the heat resistant cylinder with heat resistant auto switch, please contact SMC. Note 4) Piston speed is ranged from 50 to 500 mm/s. Specifications mbient temperature range 10 C to 150 C Seal material Fluororubber Grease eat resistant grease Specifications other than above and external dimensions Warning Precautions Same as standard type e aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. ow to Order model no. X6 eat resistant cylinder 51

53 Made to Order Series 3 Special Port Location Compared with the standard type, a cylinder which changes the connection port location of rod/head cover and the location of cushion valve. pplicable Series Description Model ction Note type Double acting, Single rod Except ø 15 W Double acting, Double rod Except ø 15 Non-rotating rod K Double acting, Single rod type KW Double acting, Double rod Low friction type Q Double acting, Single rod Note) The cover shape is the same as the existing product. ow to Order W Mounting style K KW Specifications: Same as standard type Relationship between Port Location and Cushion Valve Location Port D C Cushion valve Port Cushion valve Corresponding symbol of mounting bracket (Positional relationships) Port Cushion valve Port C C Stroke Suffix Special port location C XC3 C Cushion valve Cushion valve -XC3 1. of position for port and cushion valve has to be looked from the rod side, as fi gures above. (In the case of standard cylinders, port must be positioned in the upper side.) Define the upper side to be, and then, C, and D in a clockwise order.. Model of combination between port and cushion valve is applicable only when the position of a port and a cushion valve on the rod cover and the head cover will be changed to the same position against the support bracket, as a rule. 3. XC3 is not available in terms of the position between port and cushion valve, since it is available in the standard products. Port Cushion valve location seen from the rod side Rod port location seen from the rod side For port location, refer to the following diagrams and show the symbols of,, C and D. C Port C Cushion valve Port C Cushion valve D D D D D D asic xial foot Rod flange ead flange Single clevis Double clevis Centre trunnion Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod With End Lock W K KW Made to Order uto Switch 5

54 Series 4 With eavy Duty Scraper -XC4 It is suitable for using cylinders under the environment, where there are much dusts in a surrounding area by using a heavy duty scraper on the wiper ring, or using cylinders under earth and sand exposed to the die-casted equipment, construction machinery, or industrial vehicles. pplicable Series Description Model ction Note type Double acting, Single rod Except ø 15 W Double acting, Double rod Except ø 15 Construction (Dimensions are the same as standard.) ow to Order model no. XC4 With heavy duty scraper Specifications: Same as standard type Caution Do not replace heavy duty scrapers. Since heavy duty scrapers are press-fi t, do not replace the cover only, but rather the entire rod cover assembly. ZZ ZZ + Stroke 5 eat Resistant Cylinder (10 to 110 C) -XC5 Cylinder which changed the seal material for heat resistance (up to 110 C) in order to use under the severe ambient temperature condition which exceeds the standard specifi cations of 10 to 70 C. pplicable Series Description Model ction Note type ow to Order W Double acting, Single rod Double acting, Double rod model no. Except ø 15, with rubber bumper and with auto switch Except ø 15, with rubber bumper and with auto switch XC5 Specifications mbient temperature range 10 C to 110 C Seal material Fluororubber With auto switch Unavailable Note ) Specifications other than above and external dimensions Same as standard type Note 1) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note ) Manufacturing built-in magnet type and the one with auto switch is impossible. Note 3) Rod boot material is heat resistant tarpaulin. eat resistant cylinder 6 Piston Rod and Rod End Nut Made of Stainless Steel -XC6 Suitable for the cases it is likely to generate rust by being immersed in the water and corrosion. pplicable Series Description Model ction Note type Non-rotating rod type Double acting, Single rod ø 15 only W Double acting, Double rod ø 15 only K Double acting, Single rod KW Double acting, Double rod Specifications Parts changed to stainless steel Max. manufacturable stroke Specifications other than above and external dimensions Piston rod, Rod end nut Double acting, Single rod: 1500 Double acting single rod with rod boot: 1000 Same as standard type ow to Order model no. XC6 Piston rod and rod end nut made of stainless steel 53

55 Made to Order Series 7 Tie-rod, Cushion Valve, Tie-rod Nut, etc. Made of Stainless Steel When using in locations where the rust generation or corrosion likelihood exists, the standard parts material have been partly changed to the stainless steel. pplicable Series Description Model ction Note type Double acting, Single rod Except ø 15 W Double acting, Double rod Except ø 15 Non-rotating rod K Double acting, Single rod type KW Double acting, Double rod With end lock Double acting, Single rod ow to Order model no. 8 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel ZZ + x Stroke + djustment Width across flats Width across flats MG Stroke XC7 4 MK ML + djustment M + Stroke + djustment Stroke adjustable mechanism MN ømi Specifications Component parts changed to stainless steel Specifications other than above Dimensions djustable Stroke Cylinder/djustable Extension Type -XC7 Tie-rod, Tie-rod nut, racket mounting bolt, Cushion valve, Lock nut Same as standard type Same as standard type -XC8 It adjusts the extending stroke by the stroke adjustable mechanism equipped in the head side. (fter the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.) pplicable Series Description Model ction Note type Non-rotating rod type ow to Order K Double acting, Single rod Double acting, Single rod Except head fl ange and clevis types Except ø 15, head fl ange and clevis types Except ø 15, head fl ange and clevis types Specifications Stroke adjustment symbol Stroke adjustment range 0 to 5 0 to 50 Specifications other than above Same as standard type Mounting style Stroke Suffix Stroke adjustment symbol Z Pivot bracket Rod end bracket XC8 K Mounting style Stroke Suffix Stroke adjustment symbol XC8 Except head fl ange and clevis types Dimensions (Dimensions other than below are the same as standard type.) Warning Precautions djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable extension type 1. When the cylinder is operating, if something gets caught between the stopper bracket for adjusting the stroke and the cylinder body, it could cause bodily injury or damage the peripheral equipment. Therefore, take preventive measures as necessary, such as installing a protective cover.. To adjust the stroke, make sure to secure the wrench flats of the stopper bracket by a wrench, etc. before loosening the lock nut. If the lock nut is loosened without securing the stopper bracket, be aware that the area that joins the load to the piston rod or the area in which the piston rod is joined with the load side and the stopper bracket side could loosen first. It may cause an accident or malfunction. ø 100 ore size MG M MI MK ML MN ZZ M8 x M10 x M14 x M14 x M16 x M0 x Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod With End Lock W K KW uto Switch Made to Order

56 Series 9 djustable Stroke Cylinder/djustable Retraction Type -XC9 The retracting stroke of the cylinder can be adjusted by the adjustment bolt. pplicable Series Description Model ction Note type Non-rotating rod type ow to Order K Double acting, Single rod Double acting, Single rod Except ø 15, head fl ange and clevis types Except ø 15, head fl ange and clevis types Specifications Stroke adjustment symbol Stroke adjustment range 0 to 5 0 to 50 Specifications other than above Same as standard type Mounting style Stroke Suffix Stroke adjustment symbol Z Pivot bracket Rod end bracket XC9 Except head fl ange and clevis types K Mounting style Stroke Suffix Stroke adjustment symbol XC9 djustable stroke cylinder/djustable retraction type Except head fl ange and clevis types djustable stroke cylinder/djustable retraction type (fter the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.) Caution Precautions 1. When air is supplied to the cylinder, if the stroke adjustment bolt is loosened in excess of the allowable stroke adjustment amount, be aware that the stroke adjustment bolt could fl y out or air could be discharged, which could injure personnel or damage the peripheral equipment.. djust the stroke when the cylinder is not pressurised. If it is adjusted in the pressurised state, the seal of the adjustment section could become deformed, leading to air leakage. Dimensions (Dimensions other than below are the same as standard type.) ZZ + Stroke + djustment b mm (djustment bolt) Width across flats ka c d + djustment ore size b c d ka mm ZZ M1 x M1 x M16 x M0 x M4 x M4 x

57 Made to Order Series 10 Dual Stroke Cylinder/Double Rod Type Two cylinders are constructed as one cylinder in a back-to-back confi guration allowing the cylinder stroke to be controlled in three steps. pplicable Series Description Model ction Note type Non-rotating rod type K With end lock ow to Order DC D C Stroke Double acting, Single rod Double acting, Single rod Double acting, Single rod Stroke GC N N S + Stroke ( + ) ZZ + Stroke ( + ) Except ø 15, clevis and trunnion types, pivot bracket and rod end bracket Except clevis and trunnion types Except clevis and trunnion types Dimensions (Dimensions other than below are the same as standard type.) Stroke -XC10 Specifications Max. manufacturable stroke Stroke + = 1000 Specifications other than above Same as standard type Mounting style Stroke Suffix + Stroke Suffix Z XC10 K Function Except clevis and trunnion types Except clevis and trunnion types When air pressure is supplied to ports and, both strokes and retract. When air pressure is supplied to ports and, out strokes. Stroke Stroke D C D C Dual stroke cylinder Mounting style Stroke Suffix + Stroke Suffix XC10 Dual stroke cylinder Stroke When air pressure is supplied to ports and, out strokes. When air pressure is supplied to ports and, both strokes and out strokes. GC N N S ZZ Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod With End Lock W K KW Made to Order uto Switch 56

58 Series 11 Dual Stroke Cylinder/Single Rod Type -XC11 Two cylinders can be integrated by connecting them in line, and the cylinder stroke can be controlled in two stages in both directions. pplicable Series Description Model ction Note type Double acting, Single rod Except ø 15 and trunnion type Specifications Max. manufacturable stroke Stroke + Stroke = 1000 Specifications other than above Same as standard type ow to Order Mounting style Stroke Suffix + Stroke - Suffix Z Pivot bracket Rod end bracket XC11 Except trunnion type Dual stroke cylinder/single rod Dimensions (Dimensions other than below are the same as standard type.) Stroke N GC tmospheric release port Stroke N S + Stroke ( + ) ZZ + Stroke ( + ) GC N N S ZZ Functional description of dual stroke cylinder Stroke or Stroke operation can be made individually. Stroke - Stroke Stroke Stroke C Stroke C C C Stroke 1) Initial state (0 stroke position) ) 1st stage (Stroke operation) When the air pressure is supplied from the port, the rod operates the stroke. 3) nd stage (Stroke - operation) Following the 1st stage, when the air pressure is supplied from the port, the rod operates the stroke -. 4) Cylinder retraction When the air pressure is supplied from the port, the rod retracts completely. Stroke Stroke Stroke Stroke C Stroke C C Stroke C Stroke operation 1) Initial state (0 stroke position) ) Operation When the air pressure is supplied from the port, the rod operates the stroke. Stroke operation 1) Initial state (0 stroke position) ) Operation When the air pressure is supplied from the port, the rod operates the stroke. Double output is possible. 57 W W Stroke Stroke C Stroke C 1) Initial state (0 stroke position) ) Double output When the air pressure is supplied to the and ports at the same time, the double output can be obtained in the stroke range. Caution Precautions 1. Do not supply air until the cylinder is fixed with the attached bolt.. If air is supplied without securing the cylinder, the cylinder could lurch, posing the risk of bodily injury or damage to the peripheral equipment.

59 Made to Order Series 1 Tandem Cylinder This is a cylinder produced with two air cylinders in line allowing double the output force. pplicable Series Description Model ction Note type Double acting, Single rod Except ø 15 ow to Order model no. 13 Fluororubber Seal Tandem cylinder XC1 Dimensions (Dimensions other than below are the same as standard type.) pplicable Series Description Model ction Note type W GC N ZZ + ( x Stroke) Double acting, Single rod Double acting, Double rod N S + ( x Stroke) Specifications Seal material mbient temperature range -XC1 Specifications Max. manufacturable stroke 500 Specifications other than above Same as standard type Function When air pressure is supplied to ports and, the output force is doubled in the retract stroke. When air pressure is supplied to ports and, the output force is doubled in the out stroke. GC N N S ZZ XC Fluororubber With auto switch Note) : 10 C to 60 C (No freezing) Without auto switch: 10 C to 70 C Non-rotating Rod Double cting, Double Rod Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod With End Lock W K KW ow to Order model no. XC Fluororubber seal Specifications other than above Same as standard type and external dimensions Note 1) Please contact SMC, as the type of chemical and the operating temperature may not allow the use of this product. Note ) Cylinders with auto switches can also be produced; however, auto switch related parts (auto switch units, mounting brackets, built-in magnets) are the same as standard products. efore using these, please contact SMC regarding their suitability for the operating environment. Note 3) No cushion is equipped for N type. uto Switch Made to Order 58