CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

Transcription

1 CAT.ES-3 E -UK Dual-Rod Cylinder Series CXS New: CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ

2 Dual-Rod Cylinder with guide functio for pick-and-place applications Series CXS! Twice the thrust Non-rotating accuracy:. 3-side work piece mounting is a reality. Ball bushing bearings and slide bearings are standard for all series. Dimensions for ball bushing bearings and slide bearings are the same. Adjustable stroke range: to mm Variations Series Bore sizes 3 Axial piping Clean room series - - Cylinder with Stable Lubrication Function (Lube-retainer) New New New New Compact type Standard type With air cushion With end lock CXSJ CXS CXS CXS (ø only) (Ball bushing only) (Ball bushing only) Dual-double-rod type CXSW Features

3 n Two new additions: New Compact type Series CXSJ: ø, ø Smaller and lightweight Overall length Compact type Air cushion type cylinders. CXS standard CXSJ Width Height Superior mounting options Auto switches can be verified from 4 directions. Reverse mounting Bore size ø ø Series CXSJ CXS CXSJ CXS Symmetric mounting Dimensions Height Width Overall length Stroke. + Stroke + Stroke 7 + Stroke Weight (g) Reverse mounting mechanism 3 Axial piping Bolt holder Reverse mounting Auto switch Mounting bolt Bolt holder Since the bolt holder is movable, the mounting bolt does not interfere with the auto switch no matter what direction it is mounted from. Allowable kinetic energy, allowable load, and non-rotating accuracy are equivalent to those of standard type CXS.

4 Dual-rod cylinder range is better than ever. New Air cushion type Series CXS: ø, ø, ø3 Air cushion only minimally adds to overall length, compared with the standard type cylinder. ø +mm CXS ø +3mm standard type ø3 +mm Cushion needles Improved allowable kinetic energy: Two to three times that of the standard type Improved noise reduction: Reduction of more than db is possible. Unique air cushion mechanism with no cushion ring Elimination of the cushion ring used in conventional type air cushions has made it possible to reduce the overall length of the cylinder while retaining all the advantages of a compact profile. A + A' A' Operating principle Piston seal A A' A' R H R H When the piston is retracting, air is exhausted through both A and A' until piston seal H passes air passage A. After piston seal H has passed air passage A, air is exhausted only through A'. The section marked with slanted lines becomes a cushion chamber, and an air cushion effect is achieved. When air is supplied for the piston extension, the check seal opens and the piston extends with no delay. Clean room series Series - CXSJ: ø, ø - Series Type Bearing type Vacuum Slide bearing -CXSJ specification Ball bushing bearing Relieving type -CXSJ Ball bushing bearing Special treatment Features

5 Compact Type Series CXSJ ø, ø New New Compact Type CXSJ Standard Type Series CXS ø, ø, ø, ø, ø, ø3 Standard Type CXS With Air Cushion Series CXS ø, ø, ø3 New New With Air Cushion CXS W With End Lock Series CXS ø, ø, ø, ø, ø, ø3 Dual-Double-Rod Type Series CXSW ø, ø, ø, ø, ø, ø3 With End Lock CXS Dual-Double-Rod Type CXSW Auto Switches Made to Order Precautions Auto Made to Switches Order Precautions

6

7 Type M L CXS Compact type Compact Type Dual-Rod Cylinder Series CXSJ P J Bearing type Slide bearing Ball bushing bearing Special function Diagnostic indication (-color display) Water resistant (-color display) ø, ø Piping Standard piping Axial piping How to Order M P M9BW Port thread type Symbol Type Bore size M Thread ø to ø Rc / TN TF NPT / G / ø3 Bore size/stroke Bore size Standard strokes,, 3, 4,,, 3, 4,, 7 Applicable auto switches: Refer to pages 4 through 4 for detailed auto switch specifications. Solid state auto switch Reed auto switch Load voltage Electrical Indicator Wiring Auto switch model entry light (output) DC AC Perpendicular In-line 3-wire (NPN) M9NV M9N V, V 3-wire (PNP) M9PV M9P -wire V M9BV M9B 3-wire (NPN) M9NWV M9NW V, V Grommet Yes 3-wire (PNP) 4 V M9PWV M9PW -wire V M9BWV M9BW 3-wire (NPN) M9NAV M9NA V, V 3-wire (PNP) M9PAV M9PA -wire V M9BAV M9BA 3-wire (NPN equiv.) V A9V A9 Yes Grommet V V A93V A93 -wire 4 V None V, V V or less A9V A9 S Number of auto switches pcs. S pc. n "n" pcs. Auto switch type Without auto switch (with built-in magnet) Select applicable auto switch types from the table below. Lead wire length (m) ) Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Consult with SMC regarding water resistant types with the above model numbers. ) m type lead wire is only applicable to D-A93. Lead wire length symbols:. m Nil (Example) M9NW m M M9NWM 3 m L M9NWL m Z M9NWZ Since there are applicable auto switches other than listed. For details about switch with pre-wired connector, refer to the Auto Switch Guide. Auto switches are shipped together (not assembled).. (Nil) (M) 3 (L) (Z) Pre-wired connector IC circuit Solid state auto switches marked with are produced upon receipt of order. Applicable load IC circuit IC circuit IC circuit IC circuit Relay, PLC Relay, PLC CXSJ CXS CXS CXS CXSW Switches Order Precautions

8 Series CXSJ Specifications Bore size Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Note) Cushion Stroke adjustable range Port size.mpa Air (non-lube).mpa.7mpa to C (with no freezing) 3 to mm/s Rubber bumper to mm compared to the standard stroke Note) The maximum piston speed shown in the table above is for extension. The maximum piston speed for retraction is approximately 7% that of extension. M3.MPa M Standard Strokes Model CXSJ CXSJ Theoretical Output Bore size CXSJ CXSJ 4 OUT OUT IN IN Note) Theoretical output (N) = Pressure (MPa) x Piston area (mm ₂ ) Weights Rod size Standard strokes,, 3, 4,,, 3, 4,, 7 Operating direction Piston area (mm ₂ ) Operating pressure (MPa) Manufacturable stroke range to to Refer to "Made to Order" on page for long strokes (i.e., strokes beyond the standard stroke range). Non-standard strokes for a size ø cylinder are available as a special order (N) Model CXSJM CXSJL CXSJM CXSJL Standard stroke (g)

9 Compact Type Dual-Rod Cylinder Series CXSJ Construction: Standard Piping CXSJM (Slide bearing) CXSJM CXSJL (Ball bushing bearing) CXSJL Parts list No. Description Housing Piston rod A 3 Piston rod B 4 Rod cover/bearing Head cover Plate 7 Piston A Piston B 9 Magnet Bumper bolt Hexagon nut Bumper Hexagon socket 3 head cap screw Hexagon socket 4 head set screw Snap ring Material Carbon steel Note) Carbon steel Note) Magnetic material Carbon steel Carbon steel Polyurethane Chromium steel Chromium steel Special steel Note Hard anodized Hard chrome plated Hard chrome plated Anodized Glossy, self-coloring hard anodized Chromated Chromated CXSJM Rod cover CXSJL Rod cover No. Description Bumper B 7 Piston seal Rod seal 9 O-ring O-ring Seal retainer Snap ring B 3 Bolt holder 4 Bearing spacer Ball bushing Piston rod A 7 Piston rod B O-ring 9 Piston C Piston rod B-side piston Piston rod B-side piston Material Note Polyurethane NBR NBR NBR NBR Stainless steel Special steel Stainless steel Special steel Hard chrome plated Special steel Hard chrome plated NBR Stainless steel CXSJ CXS CXS CXS CXSW Switches Note) Stainless steel for CXSJM. Replacement parts: Seal kits Model Seal kit no. Kit components Order CXSJ CXSJ CXSJ-PS CXSJ-PS Items 7,, and from the chart above 3

10 Series CXSJ Construction: Axial Piping CXSJP, CXSJP Parts list: Axial piping No. Description Material Note Cover Adapter Hexagon socket head cap screw Hexagon socket head plug O-ring O-ring Steel ball Steel ball Steel ball Chromium steel Chromium steel NBR NBR Special steel Special steel Special steel Hard anodized Anodized Hard chrome plated Hard chrome plated Hard chrome plated Parts other than those listed above are the same as those for CXSJ standard type. Clean Room Series There are two types of cylinders, relieving type and vacuum type, available for a clean room environment. The relieving type specification with the double-seal construction of the rod section allows the cylinder to channel exhaust through the relief port directly to the outside of a clean room environment. The vacuum type specification allows for the application of a vacuum on the rod section while forced exhaust of air takes place through the vacuum port to the outside of a clean room environment. How to Order CXSJ M Bore size Stroke Auto switch Bearing type M L Slide bearing Ball bushing bearing Only ball bushing bearing is available for "Clean room specification -". Clean room specification Vacuum type Relieving type (with specially treated sliding parts) Bore size/stroke Bore size Standard strokes,, 3, 4,,, 3, 4, Specifications Bore size Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Stroke adjustable range Bearing type.mpa Refer to the separate clean room series catalog for dimensions..mpa.7mpa.mpa to C (with no freezing) 3 to 4mm/s to mm compared to the standard stroke Slide bearing, Ball bushing bearing 4

11 Compact Type Dual-Rod Cylinder Series CXSJ Dimensions: ø Standard Piping M3 through M3 x 3L (Hexagon socket head set screw) ±. ±. -M3 through.7.7 ø4 () ( + ST) ST 4 + ST ST ST. M x 7.L (Bolt holder) ø3.4 through ø. counterbore with depth (Opposite side: Same) M3 x.l (Hexagon head bolt) M3 (Hexagon nut) 9 + ST.. 4-M3 with depth M3 with depth 3 (Piping port) ±. -M3 through M. x L (Hexagon socket head cap screw) CXSJ CXS CXS CXS CXSW Part no. CXSJ- CXSJ- CXSJ-3 CXSJ-4 CXSJ- ST ST 9 + ST 3 + ST 4 + ST Switches Order Precautions

12 Series CXSJ Dimensions: ø Standard Piping -M3 through 4 () ( + ST) ST ST 4 + ST ± ± ST ø 33 ±. + ST M x 4L (Hexagon socket head set screw) M x 7.L (Bolt holder) -M3 x. through ø3.4 through ø. counterbore with depth. (Opposite side: Same) M4 x 4.L (Hexagon head bolt) M4 x (Hexagon nut) 4-M3 with depth 4. -M4 through M3 x L (Hexagon socket head cap screw). -M with depth 4 (Piping port) Part no. CXSJ- CXSJ- CXSJ-3 CXSJ-4 CXSJ- CXSJ-7 ST ST + ST ST + ST

13 Compact Type Dual-Rod Cylinder Series CXSJ Dimensions: ø, ø Axial Piping CXSJP 7..7 IN CXSJP 4-M. x L -M3 with depth 3 (Piping port) OUT ST ST (49 + ST) 4 + ST 3 + ST + ST 9 + ST (4. + ST) + ST ST + ST 7 Steel balls Steel balls Part no. CXSJP- CXSJP- CXSJP-3 CXSJP-4 CXSJP- ST ST 9 + ST 3 + ST 4 + ST (49 + ST) Dimensions other than those listed above are the same as for standard products. CXSJ CXS CXS CXS CXSW 4-M. x L -M with depth 4 (Piping port) OUT IN + ST Part no. ST + ST + ST ST + ST (4. + ST) CXSJP- CXSJP- CXSJP-3 CXSJP-4 CXSJP- CXSJP Dimensions other than those listed above are the same as for standard products. Precautions Switches Order 7

14 Auto Switch Proper Mounting Position for Stroke End Detection CXSJ, A A A CXSJ to 3 B Electrical entry direction: Inward CXSJ to 3 B D-A9 (Reed switch) D-M9 (Solid state switch) D-M9W D-M9A C C C C3 C D D Electrical entry direction: Outward Auto switch mounting dimensions C3 CXSJ, A D-A9 (Reed switch) D-M9W D-M9 D-M9A (Solid state switch) Auto Switch Mounting Series CXSJ Auto Switch Mounting B C D-A9V (Reed switch) C D D-A9V (Reed switch) D-M9V (Solid state switch) D-M9WV D-M9AV Operating Range Auto switch model D-A9, D-A9V D-M9, D-M9V D-M9A, D-M9AV D-M9W, D-M9WV Auto switch model D-M9, D-M9W D-M9A D-A9V D-M9WV D-M9AV. Symbol A A C C C3 3 Bore size Auto Switch Proper Mounting Position Bore size D-A9, D-A9 D-A93 D-M9, D-M9W D-M9AV A B C D A B C D A B C D D Bore size 3 A D-M9A B C D Bore size The operating ranges are provided as guidelines including hystereses and are not guaranteed values (assuming approximately ±3% variations). They may vary significantly with ambient environments. D-M9V D-M9WV D-M9AV (Solid state switch) Auto switch model D-A9 D-M9, D-M9W D-M9A D-A9V D-M9V, D-M9WV D-M9AV Symbol A B B C, D C, C3, D C, D C, C3, D A Bore size 4. B D-M9V, D-M9WV C Note ) ø: D-A9, A9, A93, F9BA ø: D-A9, A9, A93 Only outward electrical entry (D dimension) is available. Note ) Minus value in D column (ø, ø, ø, ø3) means that the auto switches are to be mounted beyond the cylinder body edges. Note 3) When setting an auto switch, confirm the operation and adjust its mounting position. D Watchmaker s screwdriver Auto switch mounting screw Tightening Torque of Auto Switch Mounting Screw (N m) Auto switch model D-A9(V) D-M9(V) D-M9W(V) Caution Auto switch q Avoid proximity to magnetic objects. When magnetic substances such as iron (including flange brackets) are in close proximity to an auto switch cylinder (auto switch mounting side), be sure to provide a Use a watchmaker s screwdriver with clearance between the magnetic substance a handle to mm in diameter when and the cylinder body as shown in the tightening the auto switch mounting drawing below. If the clearance is less than screw. mm, the auto switch may not function properly. w For CXSJ/, the switch cannot be attached or detached from the plate Tightening torque side if the middle groove (indicated. to. by arrows in the figure on the right) is used. (It will interfere with the bumper. to. bolt at the end of the groove.) mm mm Other than the applicable auto switches listed in How to Order, the following auto switches can be mounted. Normally closed (NC = b contact), solid state auto switches (D-F9G and D-F9H type) are also available.

15 Solid state switch Reed switch M L Standard Type Dual-Rod Cylinder Series CXS CXS M Bearing type Slide bearing Ball bushing bearing ø, ø, ø, ø, ø, ø3 Bore size/standard stroke Bore sizes Standard strokes,, 3, 4,,, 3 Diagnostic indication (-colour display) Water-resistant (-colour display),,,, 3, 3, 4, 4,,, 7, 7,,,, 3, 3, 4, 4,,, 7, 7,, 9, Grommet Grommet Yes 3-wire -wire 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire 4V 4V How to Order Y7BW S V V V, V V, V V V, V V V V or less Number of auto switches pcs. S pc. n "n" pcs. Auto switch type Without auto switch (with built-in magnet) Select applicable auto switch types from the table below. Applicable auto switches: Refer to pages 4 through 4 for detailed auto switch specifications. Load voltage Auto switch type Lead wire length (m) Type Special Electrical Indicator Wiring Electrical entry direction. 3 Applicable loads function entry light (output) DC AC Perpendicular In-line ( ) (L) (Z) No Yes Thread type Symbol Type Bore size M Thread ø to ø Rc / TN TF NPT / G / ø, ø3 Lead wire length symbols:.m... (Example) Y9A 3m... L Y9AL m... Z Y9AZ Note) Solid state switches marked "" are produced upon receipt of order. Y9A Y7PV Y9B Y7NWV Y7PWV Y7BWV Z7 Z73 Z Y9A Y7P Y9B Y7NW Y7PW Y7BW Y7BA IC circuit IC circuit IC circuit IC circuit Relay PLC Relay PLC 9 CXSJ CXS CXS CXS CXSW Switches Order Precautions

16 Series CXS Specifications Made to Order Made to Order Specifications Bore size 3 Fluid Proof pressure Maximum operating pressure Minimum operating pressure.mpa Air (non-lube).mpa.7mpa.mpa.mpa Ambient and fluid temperature to C (with no freezing) Piston speed Note) Cushion 3 to 3mm/s 3 to mm/s 3 to 7mm/s Rubber bumper 3 to mm/s Stroke adjustable range to mm compared to the standard stroke Port size M / Bearing type Slide bearing, Ball bushing bearing (Same dimensions for both) Note) The maximum piston speed shown in the table above is for extension. The maximum piston speed for retraction is approximately 7% that of extension. Standard Strokes Model CXS CXS CXS CXS CXS CXS3 Theoretical Output Standard strokes,, 3, 4,,,,, 3, 3, 4, 4,,, 7, 7,,,, 3, 3, 4, 4,,, 7, 7,, 9, Manufacturable stroke range to to to to Refer to "Made to Order" on page for long strokes (i.e., strokes beyond the standard stroke range). Non-standard strokes for a size ø cylinder are available as a special order. Refer to pages 49 through for Series CXS Made to Order specifications. Weights Model CXSM CXSL CXSM CXSL CXSM CXSL CXSM CXSL CXSM CXSL CXSM3 CXSL Bore size Rod size Operating Piston area direction (mm ₂ ).. CXS CXS CXS CXS CXS CXS3 4 IN OUT OUT OUT OUT IN IN IN IN OUT IN OUT Note) Theoretical output (N) = Pressure (MPa) x Piston area (mm ₂ ) Standard stroke Operating pressure (MPa) (N) (kg)

17 Standard Type Dual-Rod Cylinder Series CXS Clean Room Series There are two types of cylinders, relieving type and vacuum type, available for a clean room environment. The relieving type specification with the double-seal construction of the rod section allows the cylinder to channel exhaust through the relief port directly to the outside of a clean room environment. The vacuum type specification allows for the application of a vacuum on the rod section while forced exhaust of air takes place through the vacuum port to the outside of a clean room environment. How to Order CXS L Ball bushing bearing Clean room specification Bore size Stroke Auto switch Specifications Bore size Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Stroke adjustable range Bearing type Copper-Free Air Cylinder Series (for cathode ray tube manufacturing process) How to Order Vacuum type Relieving type (with specially treated sliding parts) CXS L Copper-free series Bore size Stroke Auto switch Ball bushing bearing Specifications and dimensions are the same as for standard products..mpa Refer to the separate clean room series catalog for dimensions. 3.MPa.7MPa.MPa Copper and fluorine-free air cylinders help prevent the adverse effects of copper ions and halogen ions produced during CRT manufacturing..mpa to C (with no freezing) 3 to 4mm/s to mm compared to the standard stroke Ball bushing bearing Note) Standard cylinders are essentially copper and fluorine-free. However, to emphasize and ensure proper ordering (i.e., copper and fluorine-free specification) when combining with other specifications, add the code - in front of the the series as shown below. Cylinder with Stable Lubrication Function (Lube-retainer) How to Order CXS Bearing type Bore size M Stroke Auto switch CXS CXS to 3 Cylinder with Stable Lubrication Function (Lube-retainer) Dimensions (Dimensions other than those shown below are the same as the standard model.) 3 Specifications Bore size 3 Action Double acting Minimum operating pressure. MPa. MPa. MPa Piston speed to 3 mm/s to mm/s to 7 mm/s to mm/s Cushion Rubber bumper Specifications other than the above are the same as the standard model. L CXSJ CXS CXS CXS CXSW. SS (4 + ST) K R L SS Model K L R CXS 4 3 CXS CXS 3. CXS 3 CXS Symbol SS Model Stroke CXS CXS CXS CXS CXS Switches Order Precautions

18 Series CXS Operating Conditions Maximum load weight When the cylinder is mounted as shown in the diagrams below, the maximum load weight W should not exceed the values illustrated in the graph immediately following the diagrams. Deflection at the plate end An approximate plate-end deflection X without a load is shown in the graph below. Allowable kinetic energy Operate a vertically mounted cylinder with a load weight and cylinder speed not exceeding the ranges shown in the graph below. A horizontally mounted cylinder should also be operated with a load weight less than the ranges given in the graph at left. Cylinder speed should be adjusted using a speed controller. Non-rotating accuracy Non-rotating accuracy θ without a load should be less than or equal to the value provided in the table below as a guide. Bore size CXSM (Slide bearing) CXSL (Ball bushing bearing) ø to ø3 ±.

19 Standard Type Dual-Rod Cylinder Series CXS Construction: Slide Bearing CXSM CXSM CXSM to 3 Parts list No. Description Housing Piston rod A 3 Piston rod B 4 Rod cover/bearing Head cover Plate 7 Piston A Piston B 9 Bumper A Magnet Bumper bolt Hexagon nut 3 Bumper B Hexagon socket 4 head cap screw Hexagon socket head set screw Snap ring Material Carbon steel Note ) Carbon steel Note ) Special steel Note ) Polyurethane Magnetic material Carbon steel Carbon steel Polyurethane Chromium steel Chromium steel Special steel Note ) Stainless steel for CXSM. Note ) Anodized aluminum alloy for CXSM. Note Hard anodized Hard chrome plated Hard chrome plated Hard anodized Chromated Chromated CXSM Parts list No. Description 7 Bumper Plug 9 Piston seal Rod seal O-ring Head cover B 3 Seal retainer 4 Port spacer Steel ball Snap ring B Replacement parts: Seal Kits Bore size 3 Material Polyurethane Chromium steel NBR NBR NBR Special steel Special steel Seal kit no. CXSM -PS CXSM A-PS CXSM -PS CXSM -PS CXSM -PS CXSM 3-PS Note Hard chrome plated Kit components Items 9 through from the above chart Seal kits consist of items 9 through, and can be ordered by using the seal kit number corresponding to each bore size. CXSJ CXS CXS CXS CXSW Switches Order Precautions 3

20 Series CXS Construction: Ball Bushing Bearing CXSL CXSL CXSL CXSL to 3 Parts list: Standard piping No. Description Housing Piston rod A Piston rod B Rod cover/bearing Head cover Plate Piston A Piston B Bumper A Magnet Bumper bolt Hexagon nut Bumper B Hexagon socket head cap screw Hexagon socket head set screw Snap ring Bumper holder Material Special steel Special steel Special steel Note ) Polyurethane Magnetic material Carbon steel Carbon steel Polyurethane Chromium steel Chromium steel Special steel Synthetic resin Note ) Anodized aluminum alloy for CXSL. Note Hard anodized Hard chrome plated Hard chrome plated Hard anodized Chromated Chromated Parts list No. Description Ball bushing 9 Bearing spacer Bumper Plug Piston seal 3 Rod seal 4 O-ring Head cover B Seal retainer 7 Port spacer Steel ball 9 Snap ring B Note ) for CXSL. Replacement parts: Seal kits Material Synthetic resin Polyurethane Chromium steel NBR NBR NBR Special steel Special steel Note ) Note Hard chrome plated Bore size Seal kit no. Kit components CXSL PS CXSL B PS CXSL A PS Items through 4 CXSL A PS from the chart above CXSL A PS 3 CXSL 3 A PS Seal kits consist of items through 4, and can be ordered by using the seal kit number corresponding to each bore size. 4

21 Switches Order Standard Type Dual-Rod Cylinder Series CXS.7 Dimensions: ø.3 OUT Model CXS- CXS- CXS-3 CXS-4 CXS M with depth 4. (Piping port) IN Stroke 3 4. () Z 3 3 M3 x L (Hexagon socket head set screw) ±. S M3 (Through) Stroke..7 SS 7 9 ø4 (3) ZZ Z ( + / ST) S (3 + ST) ZZ (. + ST) SS ( 4 + ST) 3 Z ( + / ST) -M3 with depth 4. (Opposite side: Same) M3 x.l (Hexagon head bolt) M3 (Hexagon nut) -ø3.4 through -ø. counterbore with depth 3.3 -M depth with 4. (Piping port) (Opposite side: Same) 37 3 ± M3 (Through) M. x L (Hexagon socket head cap screw) CXSJ CXS CXS CXS CXSW Precautions

22 I Series CXS Dimensions: ø, ø N (I) (L) (Z) U QQ C (G) NN (L) (Z) V (Opposite side: Same) Q R 4-M with depth 4. (Piping port) (Opposite side: Same) Y (Hexagon socket head set screw) Stroke J 9 L Z ZZ SS M B D.3 P (G) H A G ±. N M4 x 4.L (Hexagon head bolt) M4 (Hexagon nut) E X (Hexagon socket head cap screw) F (Through) Model CXS CXS Strokes Symbol Model Stroke CXS CXS A 4 B 7 C 44 D E 7. 9 F -M4 -M G 3 4 H I 4 J L 3 M -ø3.4 through -ø. counterbore with depth 3.3 -ø4.3 through -ø counterbore with depth 4.4 N -M4 with depth NN ø P -M3 ø 33.. with depth 4 Q QQ 7 R 3 3. U -M4 with depth 7 -M with depth V 4-M3 with depth 4. 4-M4 with depth X M3 x M x Y SS Z ZZ ,, 3, 3, 4, 4,, 7, 7 9, M x L M x L

23 Standard Type Dual-Rod Cylinder Series CXS Dimensions: ø, ø, ø3 P.3 Model CXS CXS CXS3 A 4 9 B 3 3 C 7 9 C (G) H D 3 3 QQ TT (G) E. 4 N Stroke Y J (Hexagon socket head set screw) I N (I) (L) (Z) F -M -M -M NN K G 7 (L) L R H 3 44 I (Z) ZZ SS Z J T Q OO (Hexagon head bolt) PP (Hexagon nut) K 4 W V (Opposite side: Same) UU (Piping port) (Opposite side: Same) M L U A M N NN OO -ø. through -ø9. counterbore with depth.3 -ø.9 through -ø counterbore with depth.3 -ø.9 through -ø counterbore with depth.3 E B D F (Through) -M4 with depth -M with depth 7. -M with depth ø ø ø G ±. X (Hexagon socket head cap screw) M x.l M x.l M x 3L P CXSJ CXS CXS CXS CXSW Strokes Symbol Model Model CXS CXS CXS3 Stroke CXS CXS CXS3 PP M M M Q QQ. 9 SS Z ZZ,, 3, 3, 4,, 7, 7,, 4,, 9, R 4 4 T 9. 3 TT. 9. U 9 UU 4-M with depth / with depth. 4- / with depth V -M4 with depth. -M with depth 7. -M with depth 7. 7 W -M with depth -M with depth -M with depth X M x M x 4 M x Y M x L M x L M x L 7 Switches Order Precautions

24 Series CXS Auto Switch Proper Mounting Positions for Stroke End Detection Electrical entry direction: Inward B Electrical entry direction: Outward D A C Bore size 3 A B D-Z7, D-Z, D-Y7W D-Y, D-Y7 C. (). (7). () 34 (3.) 34 (3.) 44 (4.) D. ( ) 3. (). ( ) 3 (.) (3.) (3.) C Auto Switch Mounting Dimensions D-Y, D-Y7V D-Y7WV D 4... D-Y7BAL C... 3 D... 3 Lead wire entry is inward prior to shipment. Notes) Negative values for dimension D indicate how much the lead wires protrude from the cylinder body. Dimensions inside ( ) are for D-Z73. D-Y, D-Y, D-Y7 (Solid state switch) D-Z7, D-Z (Reed switch) A Dimension A Switch types D-Y9A, D-Y7P, D-Y9B D-Y9A, D-Y7PV, D-Y9B D-Y7NWV, D-Y7PWV, D-Y7BWV D-Y7NW, D-Y7PW, D-Y7BW D-Y7BAL D-Z7, D-Z.7.. Bore size Auto Switch Mounting When mounting and securing auto switches, they should be inserted into the cylinder's switch mounting rail from the direction shown in the drawing below. After setting in the mounting position, use a flat head watchmakers screwdriver to tighten the set screw that is included. Note) When tightening the auto switch mounting screw, use a watchmakers screwdriver with a handle about to mm in diameter. Tighten with a torque of. to.n m. As a rule, the mounting screw should be turned about 9 past the point at which tightening can first be felt. M. x 4 (included with auto switch) Caution. Take precautions when magnetic substances come in close proximity of the cylinder with auto switches. When magnetic substances such as iron (including flanges) are in close proximity of an auto switch cylinder, be sure to provide a clearance between the magnetic substance and the cylinder body as shown in the drawing below. If the clearance is less than the values noted in the table below, the auto switch may not function properly. Bore size ø ø ø ø ø ø3 X

25 Bore sizes, 3 Dual-rod cylinder M L Dual-Rod Cylinder with Air Cushion Series CXS ø, ø, ø3 CXS M Bearing type Slide bearing Ball bushing bearing Bore size/stroke Strokes,, 3, 3, 4, 4,,, 7, 7,, 9,, 3, 3, 4, 4,,, 7, 7,, 9, Grommet Yes 3-wire -wire 3-wire (NPN) 3-wire (PNP) 4V How to Order V V V, V V, V A Y7BW S V V or less Y9A Y7PV Air cushion Z7 Z73 Z Y9A Y7P Number of auto switches Nil S n pcs. pc. "n" pcs. Auto switch type Nil Without auto switch (with built-in magnet) Applicable auto switches: Refer to pages 4 through 4 for detailed auto switch specifications. Load voltage Auto switch type Lead wire length (m) Special Electrical Indicator Wiring Type Electrical entry direction function entry light (output). 3 DC AC Perpendicular In-line (Nil) (L) (Z) Reed switch No Port thread type Symbol Type Nil M Rc TN NPT TF G Bore sizes ø ø, ø3 Select applicable auto switch types from the table below. Applicable loads IC circuit IC circuit IC circuit Relay PLC CXSJ CXS CXS CXS CXSW Solid state switch Diagnostic indication (-colour display) Grommet Yes -wire 3-wire (NPN) 3-wire (PNP) 4V V V, V Y9B Y7NWV Y7PWV Y9B Y7NW Y7PW IC circuit Relay PLC Switches Water-resistant (-colour display) -wire V Y7BWV Y7BW Y7BA Order Lead wire length symbols:.m... Nil (Example) Y9A 3m... L Y9AL m... Z Y9AZ Note) Solid state switches marked "" are produced upon receipt of order. 9

26 Series CXS Specifications Specific Product Precautions Be sure to read before handling. Refer to pages 4 through 7 for Safety Instructions, Actuator Precautions, and Auto Switch Precautions. Caution Selection. Operate the cylinder until the stroke end. If the stroke is restricted by the external stopper and clamp work piece, effective cushioning and noise reduction will not be achieved.. Adjust the cushion needles to absorb the kinetic energy during the cushion stroke so that excessive kinetic energy does not remain when the piston reaches the stroke end. If the piston reaches the stroke end with excessive kinetic energy remaining (more than the values given in table below) due to an improper adjustment, excessive impact will occur, causing damage to machinery. Table. Allowable kinetic energy at piston impact Bore size 3 Piston speed (mm/s) to 7 to to Allowable kinetic energy (J) Cushion Needle Adjustment Caution. Keep the adjustment range for the cushion needles between the fully closed position and the rotations shown below. Bore size Rotations 3. rotations or less 3 rotations or less Use a 3mm flat head watchmakers screwdriver to adjust the cushion needles. Never set the cushion needles to the fully closed position, as this will cause damage to the seals. The adjustment range for the cushion needles must be between the fully closed position and the open position ranges indicated in the table above. A retaining mechanism prevents the cushion needles from slipping out; however, they may spring out during operation if they are rotated beyond the ranges shown above. Bore size Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Note) Air (non-lube).mpa.7mpa.mpa to C (with no freezing) to mm/s 3 Port size M Rc / (NPT /, G /) Bearing type Cushion Slide bearing, Ball bushing bearing (Same dimensions for both) Air cushion (both sides) Note) The maximum piston speed shown in the table above is for extension. The maximum piston speed for retraction is approximately 7% that of extension. Cushion Mechanism Bore size 3 Standard Strokes Model Standard strokes CXS,, 3, 3, 4, 4,,, 7, 7,, 9, CXS, 3, 3, 4, 4,,, 7, 7,, 9, CXS3 Refer to "Made to Order" on page for long strokes (i.e., strokes beyond the standard stroke range). Theoretical Output Model CXS CXS CXS3 Weights Model CXSM-A CXSL-A CXSM-A CXSL-A CXSM3-A CXSL3-A Rod size.. Effective cushion length Operating direction OUT IN OUT IN OUT IN Piston area (mm ₂ ) Note) Theoretical output (N) = Pressure (MPa) x Piston area (mm ₂ ) Absorbable kinetic energy (J).4.7. Operating pressure (MPa) Standard stroke (N) (kg) Precautions for selection standard, mounting, piping, and operating environment are same as for the standard series.

27 Dual-Rod Cylinder with Air Cushion Series CXS Construction CXSM: Parts list No CXSM with air cushion Description Housing Piston rod A Piston rod B Rod cover/bearing Head cover Plate Piston A Piston B Bumper B Magnet Bumper bolt Hexagon nut Bumper Hexagon socket head cap screw Hexagon socket head set screw Snap ring Steel ball Piston seal Rod seal O-ring O-ring Cushion needle Check seal retainer Check seal Needle gasket Check gasket Replacement parts: Seal kits Bore size A Seal kit no. Material Note Hard anodized Carbon steel Hard chrome plated Carbon steel Hard chrome plated Special steel Electroless nickel plated Glossy, self-coloring hard anodized Chromated Chromated Polyurethane Magnetic material Carbon steel Carbon steel Polyurethane Chromium steel Chromium steel Special steel Special steel NBR NBR NBR NBR Stainless steel Copper alloy NBR NBR NBR Close-up of A Kit components CXSL with air cushion A CXSL: Parts list No. Description Housing Piston rod A 3 Piston rod B 4 Rod cover/bearing Ball bushing Bumper holder 7 Head cover Plate 9 Piston A Piston B Bumper B Magnet 3 Bumper bolt 4 Hexagon nut Bumper Hexagon socket head cap screw 7 Hexagon socket head set screw Snap ring 9 Steel ball Piston seal Rod seal O-ring 3 O-ring 4 Cushion needle Check seal retainer Check seal 7 Needle gasket Check gasket Material Special steel Special steel Synthetic resin Special steel Polyurethane Magnetic material Carbon steel Carbon steel Polyurethane Chromium steel Chromium steel Stainless steel Stainless steel NBR NBR NBR NBR Stainless steel Copper alloy NBR NBR NBR Close-up of A Note Hard anodized Hard chrome plated Hard chrome plated Electroless nickel plated Glossy, self-coloring hard anodized Chromated Chromated CXSJ CXS CXS CXS CXSW Switches Order 3 CXSA-PS CXSA-PS CXS3A-PS Items through from the chart above Seal kits consist of items through, and can be ordered by using the seal kit number corresponding to each bore size.

28 Series CXS Dimensions: ø -M4 with depth (3) (Z) -M with depth 3 (Z) 4-M4L with depth. S ZZ (Steel ball) M x (Hexagon socket head set screw) SS 3 Z.3 3 ø ±. 7. ±. (4.) 9. ±. -ø. through -ø9. counterbore with depth.3. -M4 with depth M x.l (Hexagon head bolt) M (Hexagon nut) M (Through) M x L (Hexagon socket head cap screw) -Cushion needle -M with depth 4. (Piping port) Part no. S SS ZZ Z CXS- A CXS- A CXS- 3A 3 CXS- 3A CXS- 4A CXS- 4A CXS- A 4 CXS- A 3 CXS- 7A 7 4 CXS- 7A CXS- A CXS- 9A 9 CXS-A 7 9

29 Dual-Rod Cylinder with Air Cushion Series CXS Dimensions: ø -M with depth 7. (3) (Z) -M with depth Compact Type CXSJ 4.3 (Steel ball) 9 M x L (Hexagon socket head set screw) ±. ±. 3 -M with depth 7. S ø 3 (Z) ZZ 3 Z SS 3. M x.l (Hexagon head bolt) M (Hexagon nut) 7. 4-M with depth (.) ±. -ø.9 through -ø counterbore with depth M (Through) M x 4L (Hexagon socket head cap screw) Standard Type CXS With Air Cushion CXS With End Lock CXS Part no. CXS- A CXS- 3A S 3 SS ZZ 4 9 Z Cushion needle -Rc / with depth. (Piping port) Note) Dual Double Rod Type CXSW CXS- 3A CXS- 4A CXS- 4A CXS- A CXS- A CXS- 7A CXS- 7A CXS- A CXS- 9A Note) For port threads TN and TF, only the piping port type varies. Auto Made to Switches Order CXS-A 7 99 Precautions 3

30 Series CXS Dimensions: ø3 -M with depth (3) (Z) -M with depth S ZZ 4 SS M x L (Hexagon socket head set screw) 3 Z 7 44 ø 7 3 (Z) 4-M with depth 7. (Steel ball) ().3 T 3 3 ±. 9 7 ±. ±. -M with depth M x 3L (Hexagon head bolt) M (Hexagon nut) -ø.9 through -ø counterbore with depth.3 -M (Through) M x L (Hexagon socket head cap screw) Cushion needle - / with depth. (Piping port) Note) Part no. CXS3- A CXS3-3A CXS3-3A CXS3-4A CXS3-4A CXS3- A CXS3- A CXS3-7A CXS3-7A CXS3- A CXS3-9A CXS3-A S SS ZZ Z 4 7 Note) For port threads TN and TF, only the piping port type varies. 4

31 Standard Type CXS Dual Double Rod Type CXSW Auto Made to Switches Order Dual-Rod Cylinder with Air Cushion Series CXS Auto Switch Proper Mounting Positions for Stroke End Detection Electrical entry direction: Inward Electrical entry direction: Outward B D Compact Type CXSJ Bore size 3 A A B. 9. D-Z7, D-Z, D-Y7W D-Y, D-Y7 C 3. (3) 3 (3.) 4. (47) D. () 4 (.). (4) D-Y, D-Y7V D-Y7WV C D Auto switch mounting and mounting dimensions are same as those for the standard type. Refer to page. C C D-Y7BAL D 3.. With Air Cushion CXS With End Lock CXS Precautions

32 Dual-Rod Cylinder with Rear End Lock Series CXS ø, ø, ø, ø, ø, ø3 How to Order Thread type Symbol Type Bore size M Thread ø to ø Rc / TN TF NPT / G / ø, ø3 CXS M R Y7BW S M L Bearing type Slide bearing Ball bushing bearing Number of auto switches pcs. S pc. n "n" pcs. Bore sizes,,,, 3 Bore size/ Stroke Strokes,, 3, 4,,, 3, 4,, 7, Auto switch type Without auto switch (with built-in magnet) Select applicable auto switch types from the table below. Rear end lock type Applicable auto switches: Refer to pages 4 through 4 for detailed auto switch specifications. Type Special function Electrical entry Indicator light Wiring (output) Load voltage DC AC Auto switch type Electrical entry direction Perpendicular In-line Lead wire length (m). ( ) 3 (L) (Z) Applicable loads 3-wire V Z7 IC circuit Reed switch Grommet Yes No -wire 4V V V, V V V or less Z73 Z IC circuit Relay PLC 3-wire (NPN) 3-wire (PNP) V, V Y9A Y7PV Y9A Y7P IC circuit Solid state switch Diagnostic indication (-colour display) Grommet Yes -wire 3-wire (NPN) 3-wire (PNP) 4V V V, V Y9B Y7NWV Y7PWV Y9B Y7NW Y7PW IC circuit Relay PLC Water-resistant (-colour display) -wire V Y7BWV Y7BW Y7BA Lead wire length symbols:.m... (Example) Y9A 3m... L Y9AL m... Z Y9AZ Note) Solid state switches marked "" are produced upon receipt of order.

33 Dual-Rod Cylinder with Rear End Lock Series CXS Specific Product Precautions Be sure to read before handling. Refer to pages 4 through 7 for Safety Instructions, Actuator Precautions, and Auto Switch Precautions. Caution Mounting Mounting and adjusting. Release the lock when mounting and adjusting the cylinder. An attempt to mount or adjust a cylinder while it is locked can damage the lock.. Never adjust the retracting stroke using a bumper bolt or external stopper. The lock will not function. Releasing the lock. Do not release the lock while a load is applied to the lock. This will cause a sudden, erratic movement of the cylinder, and create a dangerous condition. Control circuit. To control the end lock cylinder, use a - position 4-/-port solenoid valve. Avoid using these valves along with a 3-position solenoid valve (especially a closed-centre metal seal type).. Be sure to supply air and apply back pressure to the retracted end before operation. If air is supplied to the extended end while there is no air inside of the cylinder, it will cause a sudden, erratic movement of the cylinder, and create a dangerous condition. Manual Release Manual release (Non-locking type). Insert the manual lever and screw it into the lock holder assembly. Specifications Bore size Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Note) Cushion Port size Bearing type Lock Specifications Lock specification Bore size Maximum holding force (N) Manual release Standard Strokes Theoretical Output Air (Non-lube).MPa.7MPa.3MPa to C (with no freezing) 3 to 3mm/s 3 to mm/s 3 to 7mm/s 3 to mm/s Bumper is standard on both sides M / Slide bearing, Ball bushing bearing (Same dimensions for both) Note) The maximum piston speed shown in the table above is for extension. The maximum piston speed for retraction is approximately 7% that of extension. 4 OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN Rear End Lock CXS3 Note) Theoretical output (N) = Pressure (MPa) x Piston area (mm ₂ ) Non-locking type Model Standard strokes CXS CXS,, 3, 4, CXS CXS CXS,, 3, 4,, 7, CXS3 Long strokes (i.e., strokes beyond the standard stroke range) are available as a special order and processed accordingly. Model CXS CXS CXS CXS CXS Weights Rod size Operating direction Piston area (mm ₂ ) Operating pressure (MPa) (N) CXSJ CXS CXS CXS CXSW. To unlock, pull the manual lever in the direction of the arrow. Release the manual lever to return the cylinder to a ready-to-lock state. 3. The manual lever (ø. x 3, tip part: M. x.3 x 3) is included with the cylinder. If additional manual levers are required, use the following part number to place an order: CXS-4BK777 (for all series) Model CXSM- R CXSL- R CXSM-R CXSL- R CXSM-R CXSL- R CXSM-R CXSL- R CXSM-R CXSL- R CXSM3-R CXSL3- R Standard strokes (kg) 7 Switches Order

34 Series CXS Construction: Slide Bearing CXSM Parts list No. Description Housing Piston rod B 3 O-ring 4 Lock rod Snap ring Lock holder 7 Lock pin Lock spring 9 O-ring Lock seal Manual lever Material Carbon steel NBR Special steel Special steel Special steel Piano wire NBR NBR Special steel Note Hard anodized Hard chrome plated Parts other than those listed above are same as the standard type. Replacement parts: Seal kits Bore size Seal kit no. Kit components CXSRM-PS CXSRLAPS 3 CXSRM-PS parts list above. CXSRLAPS CXSRM3-PS CXSRL3APS CXSRM-PS CXSRM-PS CXSRM-PS components of the page 4 plus items 9 CXSRLAPS CXSRLAPS CXSRLAPS Includes seal kit featured on and from the the kit Seal kits consist of the seal kits featured on page 4 plus items 9 and from the above parts list, and can be ordered by using the seal kit number corresponding to each bore size.

35 Dimensions: ø, ø, ø CXS-R Dual-Rod Cylinder with Rear End Lock Series CXS Manual lever insertion ø.7 Compact Type CXSJ CXS -R 7. Hexagon (width across flats ) ZZ SS (Z). 3 Model SS ZZ CXS-R CXS-R CXS-3R CXS-4R CXS-R Dimensions other than those listed above are the same as for the standard type. Standard Type CXS With Air Cushion CXS (Z) Manual lever insertion ø.7 With End Lock CXS Z ZZ SS K Hexagon (O) KK Dual Double Rod Type CXSW 3 Model CXS-R CXS-R K.. O Width across flats Width across flats 3 Switches Model Symbol Stroke KK SS Z CXS-R CXS-R Dimensions other than those listed above are the same as for the standard type ZZ Order Precautions 9

36 3 Series CXS Dimensions: ø, ø, ø3 (Z) (Z) Manual lever insertion ø.7 Hexagon (O) KK ZZ SS Z 3 Model CXS-R CXS-R CXS3-R O Width across flats 3 Width across flats Width across flats 9 Model CXS-R CXS-R CXS3-R Symbol Stroke KK SS Z ZZ Dimensions other than those listed above are the same as for the standard type.

37 Dual Double Rod Type CXSW Switches Order Dual-Rod Cylinder with Rear End Lock Series CXS Auto Switch Proper Mounting Positions for Stroke End Detection Electrical entry direction: Inward Electrical entry direction: Outward B D Compact Type CXSJ A C Standard Type CXS Bore size 3 A B D-Z7, D-Z, D-Y7W D-Y, D-Y7 C D. (). (9). (7). (7). (). (9) 34 (3.) 3 (.) 34 (3.) 3 (.) 44 (4.) 3 (33.) D-Y, D-Y7V D-Y7WV C D D-Y7BAL C D With Air Cushion CXS Auto switch mounting and mounting dimensions are same as those for the standard type. Refer to page. With End Lock CXS 3 Precautions

38 Dual-Double-Rod Cylinder Series CXSW ø, ø, ø, ø, ø, ø3 How to Order Thread type Symbol Type Bore size M Thread ø to ø Rc / TN TF NPT / G / ø, ø3 CXS W L Y7BW S Dual-double-rod type M L Bearing type Slide bearing Ball bushing bearing Bore size/stroke Bore sizes Standard strokes,,, 3,, 3, 4,,, 3, 4,,, 3, 4,, 7, Number of auto switches pcs. S pc. n "n" pcs. Auto switch type Without auto switch (with built-in magnet) Select applicable auto switch types from the table below. Applicable auto switches: Refer to pages 4 through 4 for detailed auto switch specifications. Type Special function Electrical entry Indicator light Wiring (output) Load voltage DC AC Auto switch type Lead wire length (m) Electrical entry direction. 3 Perpendicular In-line () (L) (Z) Applicable loads Reed switch Grommet Yes No 3-wire -wire 4V V V V, V Z7 IC circuit V V or less Z73 Z IC circuit Relay, PLC 3-wire (NPN) 3-wire (PNP) V, V Y9A Y7PV Y9A Y7P IC circuit Solid state switch Diagnostic indication (-colour display) Grommet Yes -wire 3-wire (NPN) 3-wire (PNP) 4V V V, V Y9B Y7NWV Y7PWV Y9B Y7NW Y7PW IC circuit Relay, PLC Water-resistant (-colour display) -wire V Y7BWV Y7BW Y7BA Lead wire length symbols:.m... (Example) Y9A 3m... L Y9AL m... Z Y9AZ Note) Solid state switches marked "" are produced upon receipt of order. Y7BAL is not compatible with sizes ø, ø, and ø. Please inquire separately. 3

39 Dual-Double-Rod Cylinder Series CXSW Specifications Bore size Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Cushion Stroke adjustable range Port size Bearing type Standard Strokes 3 Air (non-lube).mpa.7mpa.mpa.mpa to C (with no freezing) to mm/s Bumper is standard on both sides to mm compared to the standard stroke (Extended end: mm; Retracted end: mm) M / Slide bearing, Ball bushing bearing (Same dimensions for both) Compact Type CXSJ Standard Type CXS Made to Order Made to Order Specifications Refer to pages 49 through for Series CXSW Made to Order specifications. Model CXSW CXSW CXSW CXSW CXSW CXSW3 Refer to "Made to Order" on page for long strokes (i.e., strokes beyond the standard stroke range). Theoretical Output Model CXSW CXSW CXSW CXSW CXSW Rod size 4 Standard strokes,, 3, 4,,, 3, 4,,, 3, 4,, 7, Piston area (mm ) (N) Operating pressure (MPa) Long stroke 7,,,,, 7, With Air Cushion CXS With End Lock CXS CXSW Note) Theoretical output (N) = Pressure (MPa) x Piston area (mm ₂ ) Weights Standard stroke Model CXSWM CXSWL (kg) Dual Double Rod Type CXSW CXSWM CXSWL CXSWM CXSWL Auto Switches CXSWM CXSWL CXSWM CXSWL Made to Order CXSWM 3 CXSWL Precautions 33

40 Series CXSW Operating Conditions Maximum load weight When the cylinder is mounted as shown in the diagrams below, the maximum load weight W should not exceed the values illustrated in the graph immediately following the diagrams. Deflection at the plate end An approximate plate-end deflection X without a load is shown in the graph below. Bore size to CXSWM (Slide bearing type) CXSWL (Ball bushing bearing type) CXSWM (Slide bearing) CXSWL (Ball bushing bearing) ±.3mm Maximum load weight W (kg) 3.. ø ø3 ø ø Allowable kinetic energy Operate a vertically mounted cylinder with a load weight and cylinder speed not exceeding the ranges shown in the graph below. A horizontally mounted cylinder should also be operated with a load weight less than the ranges given in the graph at left. Cylinder speed should be adjusted using a speed controller.. ø ø 4 Cylinder stroke 4 CXSW3 CXSW CXSW Note) Consult with SMC regarding the maximum load weight for long strokes depending on your sepecific usage conditions. Non-rotating accuracy Non-rotating accuracy θ without a load should be less than or equal to the value provided in the table below as a guide. Load weight W (kg) CXSW CXSW CXSW. Bore size CXSWM (Slide bearing) CXSWL (Ball bushing bearing) to 3 ±.. 3 Cylinder speed Vp (mm/s) 34

41 Dual-Double-Rod Cylinder Series CXSW Construction CXSWM Slide bearing CXSWL Ball bushing bearing Parts list No (Piston) CXSW Description Housing Piston rod A Piston rod B Rod cover/bearing Plate Piston A Piston B Magnet Bumper bolt Hexagon nut Hexagon socket head cap screw Hexagon socket head set screw Material Carbon steel Carbon steel Magnetic material Carbon steel Carbon steel Chromium steel Chromium steel CXSW Note Hard anodized Hard chrome plated Hard chrome plated Hard anodized Chromated Chromated Note) Piston rod for CXSWL is quenched. Replacement parts: Seal kits Bore size Seal kit no. Kit components CXSWM-PS CXSWL-PS CXSWM-PS CXSWLAPS CXSWM-PS CXSWLAPS Items through CXSWM-PS from the chart above. CXSWLAPS CXSWM-PS CXSWLAPS 3 CXSWM3-PS CXSWL3APS CXSW, 3 Parts list No. Description 3 Snap ring 4 Bumper holder Ball bushing Bearing spacer 7 Bumper Plug 9 Seal retainer Piston seal Rod seal O-ring 3 O-ring CXSWM CXSWL CXSWL, Material Special steel Synthetic resin Synthetic resin Polyurethane Chromium steel NBR NBR NBR NBR Note Seal kits consist of items through, and can be ordered by using the seal kit number corresponding to each bore size. However for CXSWL, there are two types of O-ring (). For other sizes, one type of O-ring is available. For CXSWL, aluminum alloy is used for. CXSJ CXS CXS CXS CXSW Switches Order 3

42 Series CXSW Dimensions: ø, ø CXSW ø4 (3) (Z) (3) W () 4-M3 with depth 4. (Opposite side: Same) Model S SS ZZ Z W CXSW- CXSW- CXSW-3 CXSW-4 CXSW For CXSW- and CXSW- only, a part of the switch rail (dimensions marked with an " ") is notched to facilitate auto switch mounting. 4-M with depth 4. (Piping port) (Opposite side: Same) ZZ. SS S. -ø3.4 through -ø. counterbore with depth (3) 3 -M3 x L 4 (Hexagon socket head set screw) -R 3. ± ± CXSW 4-M3 with depth 4-M3 (Through) -ø3.4 through -ø. counterbore with depth 3.3 -M x L (Hexagon socket head set screw) ±. ± () ø R3. -R3. -M3 x.l (Hexagon head bolt) -M3 (Hexagon nut) -M4 with depth 7 4-M3 with depth 4. 4-M with depth 4. (Piping port) (Opposite side: Same) ZZ SS Z () 3 (Z) (Z) 7 3 () () 9 S -. -M. x L (Hexagon socket head cap screw) Standard stroke Long stroke (-XB) 3 ±. 7 4-M3 (Through) Model CXSW- CXSW- CXSW-3 CXSW-4 CXSW- CXSW-7 CXSW- CXSW- CXSW- S SS ZZ Z For CXSW- and CXSW- only, a part of the switch rail (dimensions marked with an " ") is notched to facilitate auto switch mounting M3 with depth -R3. -M4 x 4.L (Hexagon head bolt) -M4 (Hexagon nut) 7. 4-M4 (Through) -M3 x L (Hexagon socket head cap screw)

43 Dual-Double-Rod Cylinder Series CXSW Dimensions: ø, ø CXSW 4.3 CXSW 4-M4 x.7 with depth 4-M4 with depth -M x L (Hexagon socket head set screw) ±. 4 4-M with depth 4. (Piping port) (Opposite side: Same) ±. ± M4 with depth () ø 9 (3) R3. -M with depth -M4 x 4.L (Hexagon head bolt) -M4 (Hexagon nut) (Z) (Z) M with depth (Z) (Z) ZZ SS Z -R (3) (3) () () 4-M4 with depth (Opposite side: Same) 3. () 9 S -M4 with depth (Opposite side: Same) 4-M with depth 4. (Piping port) (Opposite side: Same) Standard stroke Long stroke (-XB) Standard stroke Long stroke (-XB) Model CXSW- CXSW- CXSW-3 CXSW-4 CXSW- CXSW-7 CXSW- CXSW- CXSW- Model CXSW- CXSW- CXSW-3 CXSW-4 CXSW- CXSW-7 CXSW- CXSW- CXSW- CXSW-7 CXSW- S S SS SS ZZ ZZ Z Z M x L (Hexagon socket head set screw) ZZ SS 3 Z -R3. -ø. through -ø9. counterbore with depth ±. ±. 4 -ø4.3 through -ø counterbore with depth 4.4 For CXSW- and CXSW- only, a part of the switch rail (dimensions marked with an " ") is notched to facilitate auto switch mounting. (3) S 4 ±. 9 4-M (Through) -M x L (Hexagon socket head cap screw) For CXSW- only, a part of the switch rail (dimensions marked with an " ") is notched to facilitate auto switch mounting. CXSJ CXS CXS CXS CXSW Switches Order.3 4-M4 with depth ø -R3. -M x.l (Hexagon head bolt) -M (Hexagon nut). 4-M (Through) -M x L (Hexagon socket head cap screw) 37 Precautions

44 Series CXSW Dimensions: ø, ø3 CXSW 4 4-M with depth 7. ±. ±. 9 -M x L (Hexagon socket head set screw) (3) 3 4 -R3. (Z) (3) -M with depth -M with depth 7. (Opposite side: Same) 3 (Z) (3) 4 4-/ with depth. (Piping port) (Opposite side: Same) ZZ SS 3. 3 Z (3) S -.7 Standard stroke Long stroke (-XB) -ø.9 through -ø counterbore with depth.3 Model CXSW- CXSW- CXSW-3 CXSW-4 CXSW- CXSW-7 CXSW- CXSW- CXSW- CXSW-7 CXSW- 7 ±. 3 S SS ZZ Z For CXSW- only, a part of the switch rail (dimensions marked with an " ") is notched to facilitate auto switch mounting..3 CXSW3 4-M with depth ± ø 4-M with depth 7. (3) 3 -R3. -M x.l (Hexagon head bolt) -M (Hexagon nut) (Z) (3) -M with depth (Z) 9 (3) -M with depth 7. (Opposite side: Same) 4- / with depth. (Piping port) (Opposite side: Same) Standard stroke Long stroke (-XB) 4 4-M (Through) -M x 4L (Hexagon socket head cap screw) Model CXSW3- CXSW3- CXSW3-3 CXSW3-4 CXSW3- CXSW3-7 CXSW3- CXSW3- CXSW3- CXSW3-7 CXSW3- S SS ZZ Z For CXSW3- only, a part of the switch rail (dimensions marked with an " ") is notched to facilitate auto switch mounting M x L (Hexagon socket head set screw) ± R3. ZZ SS Z 4 S (3) -ø.9 through -ø counterbore with depth ± M with depth ø -R3. -M x 3L (Hexagon head bolt) -M (Hexagon nut) 4-M (Through) -M x L (Hexagon socket head cap screw)

45 Switches Order Dual-Double-Rod Cylinder Series CXSW Auto Switch Proper Mounting Positions for Stroke End Detection Bore size 3 A A Electric entry direction: Inward A D-Z7, D-Z, D-Y7W D-Y, D-Y7 B 9. (.3) 4. (3) 3 (9.) 3. (37) 39. (3) (4.) D-Y, D-Y7V D-Y7WV B Auto switch mounting and mounting dimensions are same as those for the standard type. Refer to page. D-Y7BAL B B Electric entry direction: Outward B CXSJ CXS CXS CXS CXSW 39

46 4 Reed Switches: Direct Mounting Type D-A9(V), D-A93(V), D-A9(V) Specifications D-A9, D-A9V Auto switch part no. Electrical entry direction Wiring type Applicable load Load voltage Load current range and Max. load current Contact protection circuit D-A9 In-line D-A9V Perpendicular IC circuit, Relay, PLC AC 4V DC or less/ma AC 4V DC or less/4ma AC V DC or less/ma -wire D-A93 In-line Relay, PLC D-A93V Perpendicular 4VDC/ to 4mA VAC/ to ma Not available D-A9 D-A9V In-line Perpendicular 3-wire IC circuit 4 to VDC/mA Internal circuits D-A9(V) D-A93(V) Reed switch D-A9(V) Reed switch Reed switch LED Resistor Zener diode LED Resistor Reverse current prevention diode Dimensions Brown [Red] Blue [Black] D-A9, D-A93, D-A9 Contact protection box CD-P CD-P DC(+) Brown [Red] CD-P CD-P Load OUT Black [White] DC( ) Blue [Black] Contact protection box OUT() Brown [Red] OUT( ) Blue [Black] (+) OUT(+) Brown [Red] OUT( ) Blue [Black] DC power ( ) Internal voltage drop Indicator light Lead wire... Oilproof heavy-duty vinyl cord: ø.7,.m D-A9 (V), D-A93 (V):.mm² x cores (Brown, Blue [Red, Black]) D-A9 (V):.mm² x 3 cores (Brown, Black, Blue [Red, White, Black]) Weights Auto switch part no. Lead wire length:.m Lead wire length: 3m Contact Protection Box Part no. CD-P CD-P Voltage VAC 4VDC D-A9 3 D-A9V 3 Lead wire length Switch connection side:.m Load connection side:.m None Type D-A9 switches do not have built-in contact protection circuits. Use a contact protection box with an induction load, when lead wires are meters or longer, and with VAC. Since D-A9(V) type switches have no particular specified voltage below VAC, select a switch type based on the voltage being used..4v or less (up to ma) 3V or less (up to 4mA) D-A93 3 D-A93V 3 Internal circuits CD-P Surge absorber CD-P Zener diodes D-A9V, D-A93V, D-A9V Red LED lights when ON Choke coil Choke coil D-A9 4.V or less (g) D-A9V 4 OUT Brown [Red] OUT Blue [Black] OUT(+) Brown [Red] OUT( ) Blue [Black] The dimension inside ( ) is for D-A93.

47 Solid State Switches: Direct Mounting Type D-F9N(V), D-F9P(V), D-F9B(V) Grommet -wire load current is reduced (. to 4 ma). Lead free UL certified (style 44) lead cable is used. Flexibility is. times greater than the conventional model (SMC comparison). Using flexible cable as standard spec. Caution Operating Precautions Fix the switch with the existing screw installed on the switch body. The switch may be damaged if a screw other than the one supplied, is used. Auto Switch Internal Circuit D-M9N(V) Switch main circuit D-M9P(V) DC (+) Brown OUT Black DC ( ) Blue DC (+) Brown Auto Switch Specifications PLC: Programmable Logic Controller D-M9/D-M9V (With indicator light) Auto switch part no. D-M9N D-M9NV D-M9P D-M9PV D-M9B D-M9BV Electrical entry direction In-line Perpendicular In-line Perpendicular In-line Perpendicular Wiring type 3-wire -wire Output type NPN PNP Applicable load IC circuit, Relay, PLC 4 VDC relay, PLC Power supply voltage Current consumption,, 4 VDC (4. to V) ma or less Load voltage VDC or less 4 VDC ( to VDC) Load current Internal voltage drop 4 ma or less. V or less. to 4 ma 4 V or less Leakage current Indicator light Standard µa or less at 4 VDC Red LED illuminates when ON. Conforming to CE Standards. ma or less Lead wires Oilproof heavy-duty vinyl cable: ø.7 x 3. ellipse D-M9B(V). mm x cores D-M9N(V), D-M9P(V). mm x 3 cores Note ) Refer to catalogue for details of solid state switch with pre-wired connector. Note ) Refer to catalogue for solid state switch common specifications and for lead wire lengths. Weights Auto switch part no.. Lead wire length 3 [m] Dimensions D-M9 4. D-M9N(V) 4 Mounting screw M. x 4 l Slotted set screw Indicator light 3. Most sensitive position.7 D-M9P(V) 4 Unit: g D-M9B(V) Unit: mm CXSJ CXS CXS CXS CXSW D-M9B(V) Switch main circuit Switch main circuit OUT Black DC ( ) Blue OUT (+) Brown D-M9V.7 Mounting screw M. x 4 l Slotted set screw Indicator light Switches Order OUT ( ) Blue 4. Most sensitive position 4

48 4 -Colour Indication Solid State Switch: Direct Mounting Style D-F9NW(V), D-F9PW(V), D-F9BW(V) Grommet -wire load current is reduced (. to 4 ma). RoHS compliant UL certified (style 44) lead cable is used. Flexibility is. times greater than the conventional model (SMC comparison). Using flexible cable as standard spec. The optimum operating position can be determined by the colour of the light. (Red Green Red) Auto Switch Internal Circuit D-M9NW(V) Switch main circuit D-M9PW(V) Switch main circuit DC (+) Brown OUT Black DC ( ) Blue DC (+) Brown OUT Black Auto Switch Specifications PLC: Programmable Logic Controller D-M9W/D-M9WV (With indicator light) Auto switch part no. D-M9NW D-M9NWV D-M9PW D-M9PWV D-M9BW D-M9BWV Electrical entry direction In-line Perpendicular In-line Perpendicular In-line Perpendicular Wiring type Output type 3-wire NPN PNP -wire Applicable load Power supply voltage Current consumption IC circuit, Relay IC, PLC,, 4 VDC (4. to VDC) ma or less 4 VDC relay, PLC Load voltage VDC or less 4 VDC ( to VDC) Load current 4 ma or less. to 4 ma Internal voltage drop Leakage current Internal voltage. V or less at ma ( V or less at 4 ma) µa or less at 4 VDC Operating position... Red LED illuminates. 4 V or less. ma or less drop Standard Optimum operating position... Green LED illuminates. Conforming to CE Standards Lead wires Oilproof heavy-duty vinyl cable: ø.7 x 3. ellipse D-M9BW(V). mm x cores D-M9NW(V), D-M9PW(V). mm x 3 cores Note ) Refer to catalogue for details of solid state switch with pre-wired connector. Note ) Refer to catalogue for solid state switch common specifications and for lead wire lengths. Weights Auto switch part no.. Lead wire length [m] 3 Dimensions D-M9W D-M9NW(V) Most sensitive position D-M9PW(V) 4 4 Unit: g D-M9BW(V) Unit: mm D-M9BW(V) DC ( ) Blue Mounting screw M. x 4 l Slotted set screw Indicator light. OUT (+) Brown 4..7 Switch main circuit D-M9WV Indicator light / Display method Operating range ON Display Red Green Red OUT ( ) Blue OFF.7 9. Mounting screw M. x 4 l Indicator light Slotted set screw Optimum operating position 4. Most sensitive position

49 43 Water Resistant -Colour Indication Solid State Switch: Direct Mounting Type D-M9NA(V)/D-M9PA(V)/D-M9BA(V) Grommet Water (coolant) resistant type -wire load current is reduced (. to 4 ma). The optimum operating position can be determined by the colour of the light. (Red Green Red) Using flexible cable as standard specification Caution D-M9NA(V) D-M9PA(V) D-M9BA(V) Precautions Fix the auto switch with the set screw attached to the auto switch body. The auto switch may be damaged if an unspecified screw is used. Auto Switch Internal Circuit Switch main circuit Switch main circuit DC (+) Brown OUT Black DC ( ) Blue DC (+) Brown OUT Black DC ( ) Blue Auto Switch Specifications PLC: Programmable Logic Controller D-M9A(V) (With indicator light) Auto switch model Electrical entry direction D-M9NA In-line D-M9NAV Perpendicular D-M9PA In-line D-M9PAV Perpendicular D-M9BA In-line D-M9BAV Perpendicular Wiring type 3-wire -wire Output type NPN PNP Applicable load Power supply voltage Current consumption IC circuit, Relay, PLC,, 4 VDC (4. to V) ma or less 4 VDC relay, PLC Load voltage Load current VDC or less 4 ma or less 4 VDC ( to VDC). to 4 ma Internal voltage drop Leakage current. V or less at ma ( V or less at 4 ma) µa or less at 4 VDC 4 V or less. ma or less Indicator light Standard Weight Dimensions D-M9A 4. Auto switch model Lead wire length [m] SMC Most sensitive position M. x 4 l Slotted set screw 4 Operating position... Red LED illuminates. Optimum operating position... Green LED illuminates. CE marking Lead wires Oilproof flexible heavy-duty vinyl cable: ø.7 x 3. ellipse D-M9BA(V). mm x cores D-M9NA(V), D-M9PA(V). mm x 3 cores Note ) Refer to catalogue for solid state switch common specifications. Note ) Refer to catalogue for lead wire lengths.. 3 Indicator light D-M9NA(V) D-M9PA(V) 4 4 Unit: g D-M9BA(V) Unit: mm 4 CXSJ CXS CXS CXS CXSW OUT (+) Brown D-M9AV Switch main circuit OUT ( ) Blue Indicator light / Display method Most sensitive position Switches ON Operating range Display Red Green Red OFF M. x 4 l Indicator light Slotted set screw 3. 4 SMC 4. Order Optimum operating position.

50 Reed Switches: Direct Mounting Type D-Z73, D-Z7, D-Z Specifications D-Z73, D-Z7 (with indicator light) Auto switch part no. D-Z73 Electrical entry direction In-line Applicable load Relay, PLC Load voltage Maximum load current and Load current range 4VDC to 4mA VAC to ma Contact protection circuit Not available Internal voltage drop Indicator light.4v or less (up to ma), 3V or less (up to 4mA) Red LED lights when ON D-Z7 IC circuit 4 to VDC ma.v or less Internal circuits D-Z (without indicator light) Auto switch part no. Electrical entry direction Applicable load Load voltage Maximum load current Contact protection circuit Internal resistance D-Z In-line Relay, PLC, IC circuit AC AC AC 4V DC or less 4V DC or less V DC or less ma 4mA Not available or less (includes 3m lead wire length) ma D-Z73 Reed switch LED D-Z7 Reed switch Resistor Zener diode Brown [Red] Blue [Black] Contact protection box CD-P CD-P DC(+) LED Brown [Red] Resistor Load Reverse OUT current prevention Black [White] diode DC( ) Blue [Black] OUT(+) Brown [Red] ~ OUT( ) Blue [Black] (+) DC power Weights Auto switch part no. D-Z73 D-Z7 D-Z Lead wire length:.m 9 Lead wire length: 3m (g) D-Z M. x 4 Slotted set screw Indicator light D-Z type comes without indicator light M. x 4 Slotted set screw Most sensitive position 3..3 Indicator light.7. ø3.4 ( ) Lead wire... Oilproof, heavy-duty vinyl cord:.m D-Z7: ø3.4,.mm² x cores (Brown, Blue [Red, Black]) D-Z: ø3.4,.mm² x 3 cores (Brown, Black, Blue [Red, White, Black]) D-Z73: ø.7,.mm² x cores (Brown, Blue [Red, Black]) Dimensions 3 49 Reed switch Contact protection box CD-P CD-P OUT() Brown [Red] OUT( ) Blue [Black] Note) A contact protection box should be used in any of the following conditions to prevent the shortening of the working life of the switch.. Operated load is an induction load.. The length of wiring to the load is m or more. 3. The load voltage is VAC. D-Z73 D-Z7, D-Z ø.7. Most sensitive position 44

51 Internal circuits D-Y9A, D-Y9A Main circuit of switch D-Y7P(V) Main circuit of switch D-Y9B, D-Y9B Main circuit of switch Solid State Switches: Direct Mounting Type A A D-Y9 B, D-Y9 B, D-Y7P(V) DC(+) Brown [Red] OUT Black [White] DC( ) Blue [Black] DC(+) Brown [Red] OUT Black [White] DC( ) Blue [Black] OUT(+) Brown [Red] OUT( ) Blue [Black] Specifications D-Y, D-Y, D-Y7P, D-Y7PV (with indicator light) Auto switch part no. Electrical entry direction Wiring type 3-wire Output type NPN PNP Applicable load Power supply voltage Current consumption IC circuit, Relay, PLC,, 4VDC (4. to VDC) ma or less Load voltage Load current VDC or less 4mA or less ma or less Internal voltage drop.v or less (.V or less at ma load current).v or less Leakage current Indicator light μa or less at 4VDC Red LED lights when ON Weights Auto switch part no. D-Y9A, D-Y9A, D-Y7P, D-Y7PV D-Y9B, D-Y9B Dimensions D-Y9A, D-Y9B D-Y7P D-Y9A, D-Y9B D-Y7PV D-Y9A In-line. D-Y9A Perpendicular. ø3.4.m 9. Most sensitive position M. x 4 Slotted set screw. D-Y7P In-line () (3) () Indicator light Lead wire length 9 () (3) (). D-Y7PV Perpendicular M. x 4 Slotted set screw Indicator light ø3.4.. Most sensitive position 7.3 D-Y9B 3m 3 D-Y9B In-line Perpendicular -wire 4VDC relay, PLC 4VDC ( to VDC) to 4mA 4V or less.ma or less at 4VDC Lead wire... Oilproof, heavy-duty, flexible vinyl cord: ø3.4,.m D-Y9A, D-Y9A, D-Y7P(V):.mm² x 3 cores (Brown, Black, Blue [Red, White, Black]) D-Y9B, D-Y9B:.mm² x cores (Brown, Blue [Red, Black]) (g) 4 CXSJ CXS CXS CXS CXSW Switches Order Precautions

52 Solid State Switches with -Colour Display: Direct Mounting Type D-Y7NW(V), D-Y7PW(V), D-Y7BW(V) Grommet Specifications D-Y7W, D-Y7WV (with indicator light ) Auto switch part no. D-Y7NW D-Y7NWV D-Y7PW Electrical entry direction Wiring type Output type Applicable load Power supply voltage Current consumption Load voltage Load current Internal voltage drop D-Y7PWV In-line Perpendicular In-line Perpendicular 3-wire NPN PNP IC circuit, Relay, PLC,, 4VDC (4. to VDC) ma or less VDC or less 4mA or less ma or less.v or less (.V or less at ma load current).v or less D-Y7BW D-Y7BWV In-line Perpendicular -wire 4VDC relay, PLC 4VDC ( to VDC) to 4mA 4V or less Leakage current A or less at 4VDC.mA or less at 4VDC Indicator light Operating position... Red LED lights up Optimum operating position... Green LED lights up Internal circuits D-Y7NW(V) Main circuit of switch D-Y7PW(V) Main circuit of switch D-Y7BW(V) DC(+) Brown [Red] OUT Black [White] DC( ) Blue [Black] DC(+) Brown [Red] OUT Black [White] DC( ) Blue [Black] OUT(+) Brown [Red] Lead wire... Oilproof, heavy-duty, flexible vinyl cord: ø3.4,.m D-Y7NW(V), D-Y7PW(V):.mm² x 3 cores (Brown, Black, Blue [Red, White, Black]) D-Y7BW(V):.mm² x cores (Brown, Blue [Red, Black]) Weights Dimensions Auto switch part no. D-Y7NW, D-Y7NWV, D-Y7PW, D-Y7PWV D-Y7BW, D-Y7BWV D-Y7NW, D-Y7PW D-Y7BW..m. Most sensitive position SMC M. x 4 Slotted set screw. Indicator light Lead wire length ø3.4 3m () (3) () (g) Main circuit of switch OUT( ) Blue [Black] D-Y7NWV, D-Y7PWV D-Y7BWV () (3) () ø3.4 Indicator light M. x 4 Slotted set screw. Indicator light. SMC.. Most sensitive position 4 7.3

53 Auto Made to Precautions Switches Order Grommet Water-resistant type (for coolant also) Water-Resistant Solid State Switch with -Colour Display: Direct Mounting Type D-Y7BAL Specifications D-Y7BAL (with indicator light ) Auto switch part no. Electrical entry direction Wiring type Applicable load Load voltage Load current Internal voltage drop Leakage current Indicator light D-Y7BAL In-line -wire 4VDC relay, PLC 4VDC ( to VDC) to 4mA 4V or less.ma or less at 4VDC Operating position... Red LED lights up Optimum operating position... Green LED lights up Lead wire... Oilproof, heavy-duty, flexible vinyl cord: ø3.4, 3m,.mm² x cores (Brown, Blue [Red, Black]) Compact Type CXSJ Standard Type CXS Usage Caution Consult with SMC if the switches are to be used with a liquid other than water. Weight Auto switch part no. D-Y7BAL Dimensions Lead wire length 3m 4 (g) With Air Cushion CXS Internal circuits D-Y7BAL Main circuit of switch OUT(+) Brown [Red] OUT( ) Blue [Black] D-Y7BAL...4. Most sensitive position ø With End Lock CXS Indicator light Operating range ON Indication Red Green Red OFF Optimum operating position.. Indicator light M. x 4 Slotted set screw Dual Double Rod Type CXSW 47