ISO15552 Cylinders ø32, ø40, ø50, ø63, ø80, ø100, ø125

Transcription

1 ISO2 Cylinders ø, ø, ø, ø, ø, ø0, ø CNOMO and circular grooves are on all four sides. Switch can be slid in. Reduced weight due a change in the configuration of the cover Small sized D-M au switch mountable Profile Design ISO Cylinder Series CP6 ISO Cylinder Series C6 New Non-rotating Rod Type dded! Weight (kg) CP/CP6 Weight Comparison (Basic type ø0-0 stroke) Series Variations Series 6.2 Reduction by 2%.76 CP CP6 Model comparison ction Type New Non-rotating Rod Type, Smooth Cylinder dded! Weight (kg) Basic C/C6 Weight Comparison (Basic type ø0-0 stroke).70 Built-in magnet Reduction by 2%. C C6 Model comparison Rod boot Bore Series CP6 Standard Double acting Single rod Double rod Non-lube Non-lube,,,, 0, Series CP6K Standard/ Non-rotating rod New Double acting Single rod Double rod Non-lube Non-lube,,,, 0 Series C6 Standard Double Single rod Non-lube,,, acting Double rod Non-lube, 0, Series C6K Standard/ Non-rotating rod New Double acting Single rod Double rod Non-lube Non-lube,,,, 0 Series C6Y New Smooth cylinder Double Single rod Non-lube,,, acting, 0, Series CP6/C6 CT.EUS-B-UK

2

3 Profile Design ISO Cylinder Series CP6 ø, ø, ø, ø, ø, ø0, ø Compliance ISO 2 Profile design with enclosed tie-rods -CP6 CP6K CP6 New Series Expanded Non-rotating rod type (Single rod/double rod) added! Made Order types added! -C6 C6Y C6K C6 Variations Standard Series CP6 Series Standard/Non-rotating rod Series CP6K ction Double acting Double acting Single rod Double rod Single rod Type Non-lube Non-lube Non-lube Basic Built-in magnet Rod boot Bore,,,, 0,,,,, 0 u Switch Simple Specials Made Order Double rod Non-lube

4 Profile Design ISO Cylinder Series CP6 Improved end of stroke cushion capacity Pisn rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. ir cylinder Compact and light design Reduced weight due a change in the configuration of the cover. New Non-rotating rod type added! θ θ Non-rotating accuracy θ ø ø ±0. ø, ø0 ±0.3 3 New Standard type with rod boot specifications. 2 Improved mounting accuracy igh accuracy covers and tie rod nuts simplify the mounting process and also extend cylinder life. Pisn rod deflection reduced Deflection of the pisn rod has been reduced by increasing the precision of the bushing and pisn rod, and reducing the lerances. [Differences between the CP6 and the CP series] ø mm pisn rod diameter for ø0 Conforming German aumobile association standard (VD) 2 Rod end nut can be screwed up TRP. 2 TRP 3 Tie-rod nuts changed conform Uses an iron-based sintered the ISO 2 standard (ø ø) material for the bushing (ø ø0) Surface treatment painting is now avoided due environmental concerns. Coating trivalent chromate only. 2

5 ø, ø, ø, ø, ø, ø0, ø Port aperture CP6 u Switch Mounting Switch can be slid in for mounting. (Switch spacer and switch mounting bracket are required for the CP.) SMC groove for M, switches and CNOMO groove are on all four sides. Max. four sides, Slide-in mountable Switch mounting surface CNOMO grooves Mount a switch from the head end for attaching the CNOMO groove on the port surfaces. Groove for the D-M, type The D-MV, V series are not mountable. Simple end of stroke cushion valve adjustment Since the adjustment of the cushion valve is performed with a hex wrench key, even finite control can be easily accomplished. Furthermore, the cushion valve has been recessed so that it does not protrude from the cover. Switch can be slid in. Mountable from both the head end and the rod end. u switch mounting screw u switch CP6K -CP6 -C6 C6Y C6K C6 u Switch New Made Order added! Improvement in applications by made order specifications. Symbol -X -XB6 -XC -XC7 -XC -XC -XC -XC3 -XC68 Specifications Change of rod end shape eat resistant cylinder ( C) With heavy duty scraper Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Fluororubber seals With coil scraper Made of stainless steel (With hard chrome plated pisn rod) Standard type Single Double rod rod Non-rotating rod type Single Double rod rod Simple Specials Made Order 3

6 ISO Cylinder: Standard Double cting, Single/Double Rod Series CP6 ø, ø, ø, ø, ø, ø0, ø ow Order With au switch CP6SD B 0 J W MBW S 0 mm mm mm mm mm 0 mm mm Built-in magnet B L F G C D Mounting Basic/Without bracket xial foot Rod end flange ead end flange Single rear clevis Double rear clevis Stroke (Refer Standard Stroke on page 6.) J JJ K KK Rod boot Without boot Nylon tarpaulin (one end) Nylon tarpaulin (both ends) eat resistant tarpaulin (one end) eat resistant tarpaulin (both ends) Rod W Single rod Double rod Number of au switches S 3 n 2 pcs. pc. 3 pcs. n pcs. u switch Without au switch For applicable au switch model, refer the below table. Made Order Refer the page 6 for details. pplicable u Switches Type Solid state switch Reed switch Special function Diagnosis indication (2-colour) Water resistant (2-colour) Electrical entry Grommet Grommet Grommet Indicar light Yes Yes None Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (Equiv. NPN) 2-wire 2 V 2 V Lead wire length symbols: 0. m (Example) MNW m M (Example) MNWM 3 m L (Example) MNWL m Z (Example) MNWZ Load voltage DC C V, V V V, V V V, V V V V Solid state switches marked with are produced upon receipt of order. Since there are other applicable au switches than listed, refer the au switch guide. For details about au switches with pre-wired connecr, refer the au switch guide. D-, M, MW, ML are shipped gether, (but not assembled). (Switch mounting bracket is only assembled at the time of shipment.) Water resistant type au switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Consult with SMC regarding water resistant types with the above model numbers. Note) D-Y, Y6, Y7P, Y7W, Z7, Z type cannot be mounted on the CP6 series. Moreover, D-M and type cannot be mounted on square groove of the CP6 series. 0 V 0 V or less u switch model MN MP MB MNW MPW MBW MN MP MB Lead wire length (m) 0. (M) 3 (L) (Z) Pre-wired connecr pplicable load IC IC IC IC IC Relay, PLC Relay, PLC

7 ISO Cylinder: Standard Double cting, Single/Double Rod Series CP6 ccessories Cylinder Mounting ccessories CP6 CP6K -CP6 -C6 C6Y C6K C6 Bore size 0 Foot (Supplied with two pieces and screws) L L L L L L0 L Female head end clevis (Corresponds E accessory) (Supplied with bolt, safety device and screws) D D D D D D0 D Male head end clevis (Supplied with screws) C C C C C C0 C Female head end clevis (for ES accessory) (Supplied with bolt, safety device and screws) DS DS DS DS DS DS0 DS Male head end clevis with ball joint (Supplied with screws) CS CS CS CS CS CS0 CS Rod/ead end flange (Supplied with screws) F F F F F F0 F ngled head ngled head end clevis end clevis with ball joint E E E E E E0 E ES ES ES ES ES ES0 ES Pisn rod ball joint (ISO 83) KJD KJD KJD KJD KJD KJD KJ27D Rod clevis (ISO 8) (Supplied with bolt and safety device) Floating joint GKM- J-- GKM-2 J-- GKM- J-- GKM- J-- GKM- J-- GKM- J-- GKM- J-27-0 u Switch Simple Specials Made Order

8 Series CP6 Specifications ction Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Lubrication Operating pisn speed llowable stroke lerance Cushion Port size Mounting 0 Double acting ir. MPa.0 MPa 0.0 MPa Without au switch: 70 C With au switch: 60 C Not required (Non-lube) 00 mm/s 700 mm/s +. 0 Up 2 st:, 00 st:, 0 st:, 00 st: Both ends (ir cushion) G /8 G / G / G 3/8 G 3/8 G /2 G /2 Basic, xial foot, Rod end flange, ead end flange, Single clevis, Double clevis, Centre trunnion Minimum Stroke for u Switch Mounting Refer page for Minimum Stroke for u Switch Mounting. 6 Made Order Symbol -X -XB6 -XC -XC7 -XC -XC -XC -XC3 -XC68 Made Order Specifications (For details, refer pages 7 6.) Specifications Change of rod end shape eat resistant cylinder ( C) With heavy duty scraper Tie rod, cushion valve, tie rod nut, etc. made of stainless steel Dual stroke cylinder/double rod Dual stroke cylinder/single rod Fluororubber seals With coil scraper Made of stainless steel. (With hard chronium plated pisn rod) No freezing Standard Stroke 0 -X Note ) -XB6 -XC7 -XC -XC68 Standard stroke,,, 0,, 0, 0, 2, 0, 0, 0,,, 0,, 0, 0, 2, 0, 0, 0,,, 0,, 0, 0, 2, 0, 0, 0, 600,,, 0,, 0, 0, 2, 0, 0, 0, 600,,, 0,, 0, 0, 2, 0, 0, 0, 600, 700, 0,,, 0,, 0, 0, 2, 0, 0, 0, 600, 700, 0 Intermediate strokes are available. Please consult with SMC for longer strokes. ø and Double rod are produced upon receipt of order. ccessories Standard Option Mounting Rod end nut Clevis pin Pisn rod ball joint Rod clevis Rod boot Note ) -X -XB6 -XC7 -XC Max. stroke Single rod Double rod Please do not use a pisn rod ball joint (or floating joint) gether with a head end clevis with a ball joint (or angled head end clevis with a ball joint). Basic Foot Rod end flange : Combination possible produce. : Combination not produced. Note ) Only for without magnet type. If you want order a combination of non Simple Special options, just add the X options by alphabetical order at the end of the part number, for example: XC7C. ead end flange X option combinations available order Symbol Single clevis Double clevis Centre trunnion

9 ISO Cylinder: Standard Double cting, Single/Double Rod Series CP6 Theoretical Output Bore size 0 Rod diameter Operating direction OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN Pisn area (mm 2 ) Note) Theoretical out put (N) = Pressure (MPa) x Pisn area (mm 2 ) OUT Operating pressure (MPa) IN (N) llowable Kinetic Energy 000 ø ø0 ø ø Load mass (kg) ø ø 0 ø CP6 CP6K -CP6 Weight (Single rod) Basic Foot Basic Weight Flange Single clevis Double clevis Trunnion dditional Weight per each mm stroke ll mounting brackets ccessory Single rod clevis Double rod clevis Calculation: (Example) CP6SD-0 Basic Weight 0.8 (kg) (Basic, ø) Mounting 0. (kg) (Double clevis) dditional Weight 0. (kg/ st) Cylinder stroke 0 (st) x =.2 kg (kg) Max. acting speed (mm/sec) Example: Load limit at rod end when air cylinder ø is actuated with max. actuating speed 0 mm/s. See the intersection of lateral axis 0 mm/s and ø line, and extend the intersection left. Thus, the allowable load is kg. -C6 C6Y C6K C6 Simple Specials Made Order u Switch 7

10 Series CP6 Construction [First angle q!6 e w i u ø ø ø!! ø ø (No flat washer for ø) i o Component Parts No. Description Material Note Rod cover ead cover Cylinder tube Pisn rod Pisn Cushion ring Tie-rod Tie-rod nut Flat washer Rod end nut Cushion valve Bushing Snap ring Rod seal holder Snap ring Cushion seal Wearing Pisn seal Rod seal Cylinder tube gasket Cushion valve seal Pisn gasket Magnet luminium die-casted luminium die-casted luminium alloy Carbon steel luminium alloy luminium alloy Carbon steel Steel Steel Steel Steel wire Bearing alloy Steel for spring Stainless steel Steel for spring Urethane rubber Resin NBR NBR NBR NBR NBR ø and ø0 ø ø ø ø Replacement Parts: Seal Kit/Single rod Kit no. CS- CS- CS- CS- CS- 0 CS6-0 CS6- Seal Kit/Double rod 0 Kit no. CSW- CSW- CSW- CSW- CSW- CS6W-0 CS6W- Contents Kits include Seal kits consist of contained in one kit, and can be orderd using the number for each respective tube bore size. Contents Kits include items!6 8

11 ISO Cylinder: Standard Double cting, Single/Double Rod Series CP6 Dimensions: Without Mounting Bracket [First angle projection] CP6S(D)B Stroke SW KK PL 2 x EE PL CP6 øb ød W WB øb E R L VD W L2 L Cushion valve BG 8 x RT G L8 + Stroke ZZ + Stroke G V R E CP6K -CP6 With rod boot ød øe l f h h + L8 + V + Stroke -C6 C6Y C6K C6 0 0 Stroke Range Without rod boot With rod boot L2 L ød øe f øb ød EE PL RT L KK SW G BG L8 VD V W WB W ZZ E d 3 60 G /8 G / G / G 3/8 G 3/8 G /2 G / M6 x M6 x M8 x. M8 x. M x. M x. M x.7 0 l M x. 6. M x. 8 M x. 8 M x. M x. M x. 3 M27 x h R u Switch Simple Specials Made Order

12 Series CP6 Dimensions: Without Mounting Bracket CP6S(D)B Stroke W SW PL 2 x EE KK PL [First angle projection] SW KK l f h h + L x Stroke ød øe øe ød ød øe øb ød W WB ød øb L VD L2 W L BG G 8 x RT Cushion valve L8 + Stroke ZY + 2 x Stroke G VD L2 L W + Stroke + Stroke With rod boot at one end With rod boot at both ends h l f L8 + Stroke 2 x h + L8 + 2 x Stroke f l + Stroke h + Stroke Stroke Range øb ød EE PL RT L KK SW G BG L8 VD W WB W ZY d L2 L G /8 G / G / G 3/8 G 3/8 G /2 G /2 3.. M6 x M6 x M8 x. M8 x. M x. M x. M x M x. M x. M x. M x. M x. M x. M27 x ød øe f l h

13 ISO Cylinder: Standard Double cting, Single/Double Rod Series CP6 Dimensions: Cylinder Mounting ccessories (L/F/G/C/D) [First angle projection] Mounting (L) X + Stroke x øb T O S + Stroke O TR E CP6K Mounting (F/G) x FB ead end mounting (G) -CP6 E2 R TF UF ZF + Stroke Rod end mounting (F) W MF MF -C6 C6Y C6K C6 Mounting (C) Mounting (D) CD u Switch CP6 EW E CB UB EB TR O T øb S X R TF øfb E2 UF W MF ZF UB h XD + Stroke CB EW øcd L L MR XD MR EB Simple Specials Made Order Max Max Max Max / / / / / / / Min. Max Max.

14 Series CP6 Dimensions: Cylinder Mounting ccessories (C/D/E/CS) [First angle projection] Mounting (C) Mounting (D) l2 l2 l l 0 E EW TG FL l L l2 ød øcd MR ød2 R E2 UB CB Max Max Mounting (E) l3 l 0 ød2 øck øs K K2 l3 G l G2 EM max. max G3 max C 6 R Mounting (CS): ead end clevis with ball joint Bore size B C ød EN øf øe L øm N P max. 7 0 ER 0. max. ± Black colour

15 ISO Cylinder: Standard Double cting, Single/Double Rod Series CP6 Dimensions: Cylinder Mounting ccessories (DS/ES) [First angle projection] Mounting (DS) l CP6 E B B2 B3 L TG T l2 L l min. l2 FL max. ød ød2 ød3 øcn SR max. R -CP Black colour Mounting (ES) l2 u Switch CP6K -C6 C6Y C6K C6 0 Black colour ød3 øcn øs K K2 l2 G G2 G3 EN EU C 6 max. max ER max Simple Specials Made Order 3

16 Series CP6 Dimensions: Pisn Rod Mounting ccessories [First angle projection] Floating Joint J M Part no. B C ød E F G P U Load (kn),, 0 M x. M x. M x. M x. M27 x 2 J-- J-- J-- J-- J Black colour Rod Clevis GKM (ISO 8), Supplied with Bolt and Safety Device øf h l Weight (g) ngle ±,, 0 e Part no. b d M x. GKM- M x. GKM-2 M x. GKM- M x. GKM- M27 x 2 GKM øf h (Shaft) øf (ole) l c min. 2 a max. 2 Pisn Rod Ball Joint KJ (ISO 83) l l3,, 0 d3 Part no. ød h d6 b h l α l3 max. min. M x. M x. M x. M x. M27 x 2 KJD KJD KJD KJD KJ27D

17 ISO Cylinder: Non-rotating Rod Type Double cting, Single/Double Rod Series CP6K ø, ø, ø, ø, ø, ø0 With au switch CP6KD Built-in magnet B L F G C D Mounting Basic/Without bracket xial foot Rod end flange ead end flange Single rear clevis Double rear clevis pplicable u Switches/Tie-rod Mounting Type Solid state switch Reed switch Special function Diagnosis indication (2-colour) Water resistant (2-colour) Electrical entry Grommet Grommet Grommet Indicar light Yes Yes None Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (Equiv. NPN) 2-wire Lead wire length symbols: 0. m (Example) MNW m M (Example) MNWM 3 m L (Example) MNWL m Z (Example) MNWZ ow Order B 0 W MBW 0 mm mm mm mm mm 0 mm 2 V 2 V Load voltage DC C V, V V V, V V V, V V V V S Stroke (Refer Maximum Stroke on page.) Solid state switches marked with are produced upon receipt of order. Since there are other applicable au switches than listed, refer the au switch guide. For details about au switches with pre-wired connecr, refer the au switch guide. D-, M, MW, ML are shipped gether, (but not assembled). (Switch mounting bracket is only assembled at the time of shipment.) Water resistant type au switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Consult with SMC regarding water resistant types with the above model numbers. Note) D-Y, Y6, Y7P, Y7W, Z7, Z type cannot be mounted on the CP6 series. Moreover, D-M and type cannot be mounted on square groove of the CP6 series. 0 V 0 V or less u switch model MN MP MB MNW MPW MBW MN MP MB Lead wire length (m) 0. () (M) 3 (L) (Z) Pre-wired connecr Number of au switches S 3 n 2 pcs. pc. 3 pcs. n pcs. u switch Without au switch For applicable au switch model, refer the below table. Rod Single rod W Double rod pplicable load IC IC IC IC IC Relay, PLC Relay, PLC CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order

18 Series CP6K Specifications ction Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Lubrication Operating pisn speed llowable stroke lerance Cushion Port size Mounting 0 Double acting ir. MPa.0 MPa 0.0 MPa Without au switch: 70 C With au switch: 60 C Not required (Non-lube) G /8 Up 2 st: 00 mm/s +.0 0, 00 st: +. 0 Both ends (ir cushion) G / G / G 3/8 G 3/8 G /2 Basic, xial foot, Rod end flange, ead end flange, Single clevis, Double clevis, Centre trunnion Non-rotating accuracy ±0. ±0. ±0.3 llowable rotating rque Nm max No freezing Minimum Stroke for u Switch Mounting Refer page for Minimum Stroke for u Switch Mounting. Maximum stroke 0 Intermediate strokes are available. Please consult with SMC for longer strokes. Max. stroke ccessories Standard Option Mounting Rod end nut Clevis pin Pisn rod ball joint Rod clevis Rod boot Basic Foot Rod end flange ead end flange Single clevis Double clevis Centre trunnion Please do not use a pisn rod ball joint (or floating joint) gether with a head end clevis with a ball joint (or angled head end clevis with a ball joint).

19 ISO Cylinder: Non-rotating Rod Type Double cting, Single/Double Rod Series CP6K Construction [First angle q!8 er @3 w CP6K CP6 i u ø, ø0 ø, ø0 -CP6 Component Parts No. Description Material Note Rod cover ead cover Cylinder tube Pisn rod Pisn Cushion ring Cushion ring Tie-rod Tie-rod nut Flat washer Rod end nut Cushion valve Non-rotating guide Snap ring Set screw Wearing Pisn seal Rod seal Cushion seal Cylinder tube gasket Cushion valve seal Pisn gasket Spring washer Pisn nut Magnet luminium die-casted luminium die-casted luminium alloy Stainless steel luminium alloy steel steel Carbon steel Steel Steel Steel Steel wire Bearing alloy Steel for spring Steel Resin NBR NBR Urethane rubber NBR NBR NBR Steel Steel ø and ø0 ø ø0 0 io Replacement Parts: Seal Kit/Single rod Seal Kit/Double rod 0 Kit no. CK- CK- CK- CK- CK- CK6-0 Kit no. CKW- CKW- CKW- CKW- CKW- CK6W-0 Contents Kits include items!!. Seal kits consist of items!! contained in one kit, and can be orderd using the number for each respective tube bore size. Contents Kits include items!6!. -C6 C6Y C6K C6 u Switch Simple Specials Made Order

20 R E R E Series CP6K Dimensions: Without Mounting Bracket [First angle projection] CP6K(D)B Stroke ø, ø PL 2 x EE ø ø0 SL BG 2 x x RT KK ' PL 2 x EE Port PL D øb W WB øb ' VD L2 W L BG 2 x x RT G 2 x Cushion valve L8 + Stroke ZZ + Stroke G V R E SECTION '-' CP6K(D)B Stroke W ø, ø PL 2 x EE ø ø0 SL BG 2 x x RT KK ' PL 2 x EE Port PL W WB cross flats SW KK D øb ød øb ' VD L2 W L BG 2 x x RT G 2 x Cushion valve G L8 + Stroke ZY + 2 x Stroke VD L2 L W + Stroke + Stroke R E SECTION '-' Mounting bracket are the same as standard type. Refer page for details. Stroke Range øb d D ød EE PL RT L KK SW G BG L8 VD V W WB W ZZ ZY E R L2 L SL G /8 3 G / G /. G 3/8. G 3/8 G /2 M6 x M6 x M8 x. M8 x. M x. M x. 6 M x. 6. M x. 8 M x. 8 M x. M x. M x

21 Series CP6 u Switch Mounting Minimum Stroke for u Switch Mounting u switch model D-M D-MW D-ML D- n = 3,, Number of au switch mounted 2 switches (Different side, Same side) switch Other qty. 2 switches (Different side, Same side) switch Other qty. 2 switches (Different side, Same side) switch Other qty. Recommended Mounting Position for Stroke Ends Operating Range u switch model D-M D-MW D-ML D Note) Since this is a guideline including hysteresis, not meant be guaranteed. (ssuming approximately ±% dispersion) There may be the case it will vary substantially depending on an ambient environment. B 0 + (n-2) + (n-2) + (n-2) + (n-2) + (n-2) + (n-2) + (n-2) + (n-2) u Switch Proper Mounting Position u switch model 0 D-M D-MW D- D-ML B B djust the au switch after confirming the operation set actually. CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order Besides the models listed ow Order, the following au switches are applicable. Normally closed (NC = b contact), solid state switch (D-FG, F type) are also available. For details, refer the au switch guide.

22 Series CP6 u Switch Mounting 2 ow Mount and Move the u Switch <pplicable u Switch> Solid state switch D-MN/MP/MB D-MNW/MPW/MBW D-MNL/MPL/MBL Reed switch D-0/3/6 ow Mount and Move the u Switch u switch mounting screw u switch Please use a watchmaker s screwdriver with a handle diameter of 6 mm when tightening the au switch mounting screw. rque of N m should be used for D-M, MW, ML, and N m for D-. Once the screw starts feel tight, tighten it further by approximately another 0. Note) D-M and type cannot be mounted on square groove of the CP6 series.

23 ISO Cylinder: Double cting Series -CP6 ø, ø, ø, ø, ø, ø0, ø ow Order CP6 TEX category 2 -CP6SD B 0 W CP6K Made order -X -XC -XC7 Classification Without magnet type 2 GD c T 8 C (T) Ta - C C T C (T) Ta C 60 C [For -CP6] When using an u switch, select the appropriate switch from the following table and order it separately. pplicable au switch specifications u switch only conforms Category 3. (II 3GD EEx n II Tx - C Ta +60 C IP67.) For detailed specifications on the D-M, D-MW, D-3 and D-0, please refer the au switch guide. (Note: Reed au switches for C 0V and DC 0V are not within the specification.) Type Solid state switch Reed switch Pisn rod type S K Standard Non-rotating rod (~0 only) Built-in magnet B L F G C D Special function Diagnosis indication (2-colour) Mounting Basic/Without bracket xial foot Rod end flange ead end flange Single clevis Double clevis Model No. D-MN-88 D-MP-88 D-MB-88 D-MNW-88 D-MPW-88 D-MBW-88 D-3-88 D-0-88 Electrical entry Grommet Grommet 0 mm mm mm mm mm 0 mm mm Indicar Yes Yes None Lead wire length symbols: 0. m (Example) D-MBW-88 m M (Example) D-MBWM-88 3 m L (Example) D-MBWL-88 m Z (Example) D-MBWZ-88 Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 2-wire 2 V 2 V Note ) DC Load voltage V, V V V, V C V 0 V V 0 V or less Standard Special rod end change With heavy duty scraper ( ~ 0 only) Tie rod, cushion valve, tie-rod nut, etc, made of stainless steel Fluororubber seals -XC -XC68 Stainless steel rod and nut Only for Standard type Rod Specifications W Single rod Double rod Stroke Refer standard stroke table 0. () With magnet type D T 8 C (T) Ta - C C T C (T) Ta C 60 C Lead wire (m) (M) 3 (L) (Z) solid state au switch is available after receiving an order. pplicable load IC IC IC Relay PLC Relay PLC Note 2) When mounting an au switch on a - series (Category 2) Model, the TEX category of the au switch cylinder changes Category 3, which is the same category as the au switch. -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order 2

24

25 ISO Cylinder Series C6 ø, ø, ø, ø, ø, ø0, ø Conforming ISO 2 CP6 -CP6 CP6K New Series Expanded Non-rotating rod type (Single rod/double rod) added! Smooth cylinder added! Made Order types added! -C6 C6Y C6K C6 Variations Standard Series C6 Series Standard/Non-rotating rod Series C6K ction Double acting Double acting Single rod Double rod Single rod Type Non-lube Non-lube Non-lube Basic Built-in magnet Rod boot Bore,,,, 0,,,,, 0 u Switch Simple Specials Made Order Double rod Non-lube Smooth cylinder Series C6Y Double acting Single rod Non-lube,,,, 0, 23

26 ISO Cylinder Series C6 Improved end of stroke cushion capacity Pisn rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. ir cylinder Compact and light design Reduced weight due a change in the configuration of the cover. New Non-rotating rod type added! θ θ Non-rotating accuracy ø ø ø, ø0 θ ±0. ±0.3 3 New Standard type with rod boot specifications. 2 Pisn rod deflection reduced Deflection of the pisn rod has been reduced by increasing the precision of the bushing and pisn rod, and reducing the lerances. Improved mounting accuracy igh accuracy covers and tie rod nuts simplify the mounting process and also extend cylinder life. [Differences between the C6 and the CP series] ø mm pisn rod diameter for ø0 Conforming German aumobile association standard (VD) 2 Rod end nut can be screwed up TRP. 2 TRP 3 Tie-rod nuts changed conform Uses an iron-based sintered the ISO 2 standard (ø ø) material for the bushing (ø ø0) Surface treatment painting is now avoided due environmental concerns. Coating trivalent chromate only. 2

27 ø, ø, ø, ø, ø, ø0, ø Port aperture CP6 elpful for au switch invenry control Easier invenry control of numerous direct mounting au switch models. Small sized au switch can be attached. Solid state: D-M Reed: D- D-MW u switch mounting screw Simple end of stroke cushion valve adjustment Since the adjustment of the cushion valve is performed with a hex wrench key, even finite control can be easily accomplished. Furthermore, the cushion valve has been recessed so that it does not protrude from the cover. Improved handling performance u switch mounting and mounting position adjustment can be made in a one way direction. Tie-rod mounting au switch (Existing) Phillips screwdriver 2-way Direct mounting au switch Watchmaker's screwdriver -way ex wrench (Width across flats 2. mm) CP6K -CP6 -C6 C6Y C6K C6 New Made Order added! Switch mounting bracket Direct mounting au switch can be fixed the tie-rod with a dedicated switch mounting bracket. u Switch Improvement in applications by made order specifications. Symbol -X -XC -XB6 -XB7 -XC -XC7 -XC -XC -XC -XC3 -XC68 Specifications Change of rod end shape Change of trunnion bracket mounting position eat resistant cylinder ( C) Cold resistant cylinder ( 70 C) With heavy duty scraper Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Fluororubber seals With coil scraper Made of stainless steel (With hard chrome plated pisn rod) Standard type Single Double rod rod Non-rotating rod type Single Double rod rod Smooth cylinder Single rod Simple Specials Made Order

28 ISO Cylinder: Standard Double cting, Single/Double Rod Series C6 ø, ø, ø, ø, ø, ø0, ø With au switch C6SD Built-in magnet Stroke Refer Standard Stroke on page 28. pplicable u Switches/Tie-rod Mounting Type Solid state switch Reed switch B L F G C D T Mounting Basic/Without bracket xial foot Rod end flange ead end flange Single clevis Double clevis Centre trunnion Special function Diagnosis indication (2-colour) Water resistant (2-colour) Diagnosis output (2-colour) Strong magnetic field resistant (2-colour) Diagnosis indication (2-colour) Electrical entry Grommet Terminal conduit Grommet Grommet Terminal conduit DIN Grommet Indicar light Yes Yes None None Yes Wiring (Output) Lead wire length symbols: 0. m (Example) MNW m M (Example) MNWM 3 m L (Example) MNWL m Z (Example) MNWZ ow Order B 0 J W MBW 0 3-wire (NPN) 3-wire (PNP) 2-wire 2-wire mm mm mm mm mm 0 mm mm 3-wire (NPN) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire -wire (NPN) 2-wire (Nonpolar type) 3-wire (Equiv. NPN) 2 V 2 V 2 V Load voltage DC C V, V V V, V V V, V u switch model Tie-rod mounting MN MP MB J MNW MPW MBW MN MP MB FF PDW Band mounting Solid state switches marked with are produced upon receipt of order. Since there are other applicable au switches than listed, refer the au switch guide. For details about au switches with pre-wired connecr, refer the au switch guide. D-, M, MW, ML are shipped gether, (but not assembled). (Switch mounting bracket is only assembled at the time of shipment.) Water resistant type au switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Consult with SMC regarding water resistant types with the above model numbers. V V, V V V, V V V 0 V, 0 V 0 V 0 V or less 0 V or less 0 V, 0 V Rod boot J JJ K KK W G3 K () (M) S u switch Without au switch For applicable au switch model, refer the below table. Without boot Nylon tarpaulin (one end) Nylon tarpaulin (both ends) eat resistant tarpaulin (one end) eat resistant tarpaulin (both ends) Lead wire length (m) 3 (L) (Z) Pre-wired connecr Made Order Refer the page 28 for details. Number of au switches S 3 n 2 pcs. pc. 3 pcs. n pcs. Rod Single rod W Double rod pplicable load IC IC IC IC IC IC IC Relay, PLC Relay, PLC PLC Relay, PLC 26

29 ISO Cylinder: Standard Double cting, Single/Double Rod Series C6 ccessories Cylinder Mounting ccessories CP6 CP6K -CP6 -C6 C6Y C6K C6 Bore size 0 Foot (Supplied with two pieces and screws) L L L L L L0 L Female head end clevis (Corresponds E accessory) (Supplied with bolt, safety device and screws) D D D D D D0 D Male head end clevis (Supplied with screws) C C C C C C0 C Female head end clevis (for ES accessory) (Supplied with bolt, safety device and screws) DS DS DS DS DS DS0 DS Male head end clevis with ball joint (Supplied with screws) CS CS CS CS CS CS0 CS Rod/ead end flange (Supplied with screws) F F F F F F0 F ngled head ngled head end clevis end clevis with ball joint E E E E E E0 E ES ES ES ES ES ES0 ES Pisn rod ball joint (ISO 83) KJD KJD KJD KJD KJD KJD KJ27D Rod clevis (ISO 8) (Supplied with bolt and safety device) Floating joint GKM- J-- GKM-2 J-- GKM- J-- GKM- J-- GKM- J-- GKM- J-- GKM- J-27-0 u Switch Simple Specials Made Order 27

30 Series C6 Specifications ction Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Lubrication Operating pisn speed llowable stroke lerance Cushion Port size Mounting 0 Double acting ir. MPa.0 MPa 0.0 MPa Without au switch: 70 C With au switch: 60 C Not required (Non-lube) mm/s 700 mm/s +. 0 Up 2 st:, 00 st:, 0 st:, 00 st: Both ends (ir cushion) G /8 G / G / G 3/8 G 3/8 G /2 G /2 Basic, xial foot, Rod end flange, ead end flange, Single clevis, Double clevis, Centre trunnion No freezing Standard Stroke Minimum Stroke for u Switch Mounting Refer page 8 for Minimum Stroke for u Switch Mounting. 28 Made Order Symbol -X -XC -XB6 -XB7 -XC -XC7 -XC -XC -XC -XC3 -XC68 Made Order Specifications (For details, refer pages 6.) Specifications Change of rod end shape Change of trunnion bracket mounting position eat resistant cylinder ( C) Cold resistant cylinder With heavy duty scraper Tie rod, cushion valve, tie rod nut, etc. made of stainless steel Dual stroke cylinder/double rod Dual stroke cylinder/single rod Fluororubber seals With coil scraper Made of stainless steel (With hard chronium plated pisn rod) Standard stroke,,, 0,, 0, 0, 2, 0, 0, 0,,, 0,, 0, 0, 2, 0, 0, 0,,, 0,, 0, 0, 2, 0, 0, 0, 600,,, 0,, 0, 0, 2, 0, 0, 0, 600,,, 0,, 0, 0, 2, 0, 0, 0, 600, 700, 0 0,,, 0,, 0, 0, 2, 0, 0, 0, 600, 700, 0 Intermediate strokes are available. Please consult with SMC for longer strokes. ø and Double rod are produced upon receipt of order. ccessories Standard Option Mounting Rod end nut Clevis pin Pisn rod ball joint Rod clevis Rod boot Basic Foot Rod end flange Max. stroke Single rod Double rod Please do not use a pisn rod ball joint (or floating joint) gether with a head end clevis with a ball joint (or angled head end clevis with a ball joint). ead end flange X option combinations available order Symbol -X -XC Note ) -XB6 -XC7 -XC -XC68 Note ) -X -XC -XB6 -XC7 -XC Note 2) X Note 2) Note 2) Single clevis Double clevis 00 Centre trunnion : Combination possible produce. X: Combination possible produce but contact with SMC. : Combination not produced. Note ) Only for without magnet type. Note 2) If XC or XCB are required, the X combination is considered as Standard. If you want order a combination of non Simple Special options, just add the X options by alphabetical order at the end of the part number, for example: XC7C or XCC68.

31 ISO Cylinder: Standard Double cting, Single/Double Rod Series C6 Theoretical Output Bore size 0 Rod diameter Operating direction OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN Pisn area (mm 2 ) Note) Theoretical out put (N) = Pressure (MPa) x Pisn area (mm 2 ) OUT Operating pressure (MPa) IN (N) llowable Kinetic Energy 000 ø ø0 ø ø Load mass (kg) ø ø 0 ø CP6 CP6K -CP6 Weight (single rod) Basic Foot Basic Weight Flange Single clevis Double clevis Trunnion dditional mass per each mm stroke ll mounting brackets ccessory Single rod clevis Double rod clevis Calculation: (Example) C6SD-0 Basic weight 0.83 (kg) (Basic, ø) Mounting 0. (kg) (Double clevis) dditional weight 0. (kg/ st) Cylinder stroke 0 (st) x =.7kg (kg) Max. acting speed (mm/sec) Example: Load limit at rod end when air cylinder ø is actuated with max. actuating speed 0 mm/s. See the intersection of lateral axis 0 mm/s and ø line, and extend the intersection left. Thus, the allowable load is kg. -C6 C6Y C6K C6 Simple Specials Made Order u Switch 2

32 Series C6 Construction [First angle q!6 e w iu ø ø ø!! ø ø (No flat washer for ø) i o Component Parts No. Description Material Note Rod cover ead cover Cylinder tube Pisn rod Pisn Cushion ring Tie-rod Tie-rod nut Flat washer Rod end nut Cushion valve Bushing Snap ring Rod seal holder Snap ring Cushion seal Wearing Pisn seal Rod seal Cylinder tube gasket Cushion valve seal Pisn gasket Magnet luminium die-casted luminium die-casted luminium alloy Carbon steel luminium alloy luminium alloy Carbon steel Steel Steel Steel Steel wire Bearing alloy Steel for spring Stainless steel Steel for spring Urethane rubber Resin NBR NBR NBR NBR NBR ø and ø0 ø ø ø ø Replacement Parts: Seal Kit/Single rod Kit no. CS- CS- CS- CS- CS- 0 CS6-0 CS6- Seal Kit/Double rod 0 Kit no. CSW- CSW- CSW- CSW- CSW- CS6W-0 CS6W- Contents Kits include Seal kits consist of contained in one kit, and can be orderd using the number for each respective tube bore size. Contents Kits include items!6

33 ISO Cylinder: Standard Double cting, Single/Double Rod Series C6 Dimensions: Without Mounting Bracket [First angle projection] C6S(D)B Stroke SW KK PL 2 x EE PL CP6 øb ød WB øb W E R CP6K L VD W L2 L Cushion valve BG 8 x RT G L8 + Stroke ZZ + Stroke G V R E -CP6 With rod boot ød øe l f h h + L8 + V + Stroke -C6 C6Y C6K C6 0 øb ød EE PL RT L KK SW G BG L8 VD V W WB W ZZ E R d G /8 G / G / G 3/8 G 3/8 G /2 G /2 3.. M6 x M6 x M8 x. M8 x. M x. M x. M x M x. M x. M x. M x. M x. M x. M27 x Minimum stroke for trunnion mounting are below. Tube I.D. : 0mm, Tube I.D. 0: mm, Tube I.D. : mm l L2 L ød øe f 0 Stroke Range Without rod boot With rod boot h u Switch Simple Specials Made Order

34 Series C6 Dimensions: Without Mounting Bracket [First angle projection] C6S(D)B KK SW Stroke PL W 2 x EE PL SW KK l h h + L x Stroke f ød øe øe ød ød øe øb ød WB ød øb W L W VD L2 L BG 8 x RT G Cushion valve L8 + Stroke ZY + 2 x Stroke G VD L2 L W + Stroke + Stroke With rod boot at one end With rod boot at both ends h l f L8 + Stroke 2 x h + L8 + 2 x Stroke f l + Stroke h + Stroke 0 øb ød EE PL RT L KK SW G BG L8 VD W WB W ZY d G /8 G / G / G 3/8 G 3/8 G /2 G /2 3.. M6 x M6 x M8 x. M8 x. M x. M x. M x M x. M x. M x. M x. M x. M x. M27 x Minimum stroke for trunnion mounting are below. Tube I.D. :0mm, Tube I.D. 0:mm, Tube I.D. :mm l h ød øe f 0 Stroke Range L2 2 2 L

35 ISO Cylinder: Standard Double cting, Single/Double Rod Series C6 Dimensions: Cylinder Mounting ccessories [First angle projection] Foot (L) X + Stroke x øb TR E T O S + Stroke O Centre trunnion (T) Z + /2 Stroke XV + /2 Stroke UW øtd Flange (F/G) E2 R CP6 CP6K -CP6 TL TM TL TF UF x FB ead end mounting (G) Rod end mounting (F) L ZF + Stroke MF -C6 C6Y C6K C6 ead end single clevis (C) ead end double clevis (D) W WF CD u Switch E EW TR O T øb S X TM TL CB UB EB øtd e8 UW L XV Z R TF øfb E2 UF W MF ZF XD + Stroke UB CB h EW øcd L L MR XD MR EB Simple Specials Made Order Max Max Max Max Max / / / / / / /-.2 Min.. Max Max

36 Series C6 Dimensions: Cylinder Mounting ccessories (C/D/E/CS) [First angle projection] Mounting (C) Mounting (D) l2 l2 l l 0 E EW TG FL l L l2 ød øcd MR ød2 R E2 UB CB Max. Mounting (E) Max l3 l 0 ød2 øck øs K K2 l3 G l G2 EM max. max G3 max C 6 R Mounting (CS): ead end clevis with ball joint 3 Bore C ød EN size B ER øf øe L øm N P max max Black colour

37 ISO Cylinder: Standard Double cting, Single/Double Rod Series C6 Dimensions: Cylinder Mounting ccessories (DS/ES) [First angle projection] Mounting (DS) l CP6 E B B2 B3 L TG T l2 l min. l2 FL max. ød ød2 ød3 øcn SR max. R -CP Black colour Mounting (ES) l2 u Switch CP6K -C6 C6Y C6K C6 0 Black colour ød3 øcn øs K K2 l2 G G2 G3 EN EU C 6 max. max ER max Simple Specials Made Order 3

38 Series C6 Dimensions: Pisn Rod Mounting ccessories [First angle projection] Floating Joint J M Part no. B C ød E F G P U Load (kn),, 0 M x. M x. M x. M x. M27 x 2 J-- J-- J-- J-- J Black colour Rod Clevis GKM (ISO 8), Supplied with Bolt and Safety Device Weight (g) ngle ± øf h l,, 0 e Part no. b d M x. GKM- M x. GKM-2 M x. GKM- M x. GKM- M27 x 2 GKM øf h (Shaft) øf (ole) l c min. 2 a max. 2 Pisn Rod Ball Joint KJ (ISO 83) l l3 36,, 0 d3 Part no. ød h d6 b h l α max. min. M x. M x. M x. M x. M27 x 2 KJD KJD KJD KJD KJ27D l

39 ISO Cylinder: Non-rotating Rod Type Double cting, Single/Double Rod Series C6K ø, ø, ø, ø, ø, ø0 With au switch C6KD Built-in magnet Stroke Refer Maximum Stroke on page 38. pplicable u Switches/Tie-rod Mounting Type Solid state switch Reed switch B L F G C D T Mounting Basic/Without bracket xial foot Rod end flange ead end flange Single clevis Double clevis Centre trunnion Special function Diagnosis indication (2-colour) Water resistant (2-colour) Diagnosis output (2-colour) Strong magnetic field resistant (2-colour) Diagnosis indication (2-colour) Electrical entry Grommet Terminal conduit Grommet Grommet Terminal conduit DIN Grommet Indicar light Yes Yes None None Yes Wiring (Output) Lead wire length symbols: 0. m (Example) MNW m M (Example) MNWM 3 m L (Example) MNWL m Z (Example) MNWZ ow Order B 0 W MBW 0 3-wire (NPN) 3-wire (PNP) 2-wire 2-wire mm mm mm mm mm 0 mm 3-wire (NPN) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire -wire (NPN) 2-wire (Nonpolar type) 3-wire (Equiv. NPN) 2 V 2 V 2 V Load voltage DC C V, V V V, V V V, V u switch model Band mounting Tie-rod mounting MN MP MB J MNW MPW MBW MN MP MB FF PDW Solid state switches marked with are produced upon receipt of order. Since there are other applicable au switches than listed, refer the au switch guide. For details about au switches with pre-wired connecr, refer the au switch guide. D-, M, MW, ML are shipped gether, (but not assembled). (Switch mounting bracket is only assembled at the time of shipment.) Water resistant type au switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Consult with SMC regarding water resistant types with the above model numbers. V V, V V V, V V V 0 V, 0 V 0 V 0 V or less 0 V or less 0 V, 0 V Rod W Single rod Double rod G3 K W 0. () S Lead wire length (m) (M) Number of au switches S 3 n 3 (L) 2 pcs. pc. 3 pcs. n pcs. u switch Without au switch For applicable au switch model, refer the below table. (Z) Pre-wired connecr pplicable load IC IC IC IC IC IC IC Relay, PLC Relay, PLC PLC Relay, PLC CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order 37

40 Series C6K Specifications ction Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Lubrication Operating pisn speed llowable stroke lerance Cushion Port size Mounting 0 Double acting ir. MPa.0 MPa 0.0 MPa Without au switch: 70 C With au switch: 60 C Not required (Non-lube) Up 2 st: 00 mm/s +.0 0, 00 st: Both ends (ir cushion) G /8 G / G / G 3/8 G 3/8 G / Basic, xial foot, Rod end flange, ead end flange, Single clevis, Double clevis, Centre trunnion Non-rotating accuracy ±0. ±0. ±0.3 llowable rotating rque Nm max No freezing Minimum Stroke for u Switch Mounting Maximum stroke Refer page 8 for Minimum Stroke for u Switch Mounting. Max. stroke Intermediate strokes are available. Please consult with SMC for longer strokes. 0 ccessories Standard Option Mounting Rod end nut Clevis pin Pisn rod ball joint Rod clevis Rod boot Basic Foot Rod end flange ead end flange Single clevis Double clevis Centre trunnion Please do not use a pisn rod ball joint (or floating joint) gether with a head end clevis with a ball joint (or angled head end clevis with a ball joint). 38

41 ISO Cylinder: Non-rotating Rod Type Double cting, Single/Double Rod Series C6K Construction [First angle q!8 er @3 w CP6K CP6 iu ø, ø0 ø, ø0 -CP6 Component Parts No. Description Material Note Rod cover ead cover Cylinder tube Pisn rod Pisn Cushion ring Cushion ring Tie-rod Tie-rod nut Flat washer Rod end nut Cushion valve Non-rotating guide Snap ring Set screw Wearing Pisn seal Rod seal Cushion seal Cylinder tube gasket Cushion valve seal Pisn gasket Spring washer Pisn nut Magnet luminium die-casted luminium die-casted luminium alloy Stainless steel luminium alloy Steel Steel Carbon steel Steel Steel Steel Steel wire Bearing alloy Steel for spring steel Resin NBR NBR Urethane rubber NBR NBR NBR steel steel ø and ø0 ø ø0 Replacement Parts: Seal Kit/Single rod 0 Kit no. CK- CK- CK- CK- CK- CK6-0 Contents Kits include items!!. Seal kits consist of items!! contained in one kit, and can be orderd using the number for each respective tube bore size. Seal Kit/Double rod 0 io Kit no. CKW- CKW- CKW- CKW- CKW- CK6W-0 Contents Kits include items!6!. -C6 C6Y C6K C6 u Switch Simple Specials Made Order 3

42 R E R E Series C6K Dimensions: Without Mounting Bracket [First angle projection] C6K(D)B Stroke ø, ø PL 2 x EE ø ø0 SL BG 2 x x RT PL 2 x EE Port PL KK ' D øb øb W WB ' VD L2 L BG 2 x Cushion valve R E SECTION '-' 2 x x RT W G L8 + Stroke ZZ + Stroke G V C6K(D)B Stroke W ø, ø PL 2 x EE ø ø0 SL BG 2 x x RT KK ' PL 2 x EE Port PL cross flats SW KK D øb WB W ød øb ' VD L2 W L BG 2 x x RT G 2 x Cushion Valve G L8 + Stroke ZY + 2 x Stroke VD L2 L W + Stroke + Stroke R E SECTION '-' Mounting bracket are the same as standard type. Refer page 33 for details. Stroke Range øb d D ød EE PL RT L KK SW G BG L8 VD V W WB W ZZ ZY E R L2 L SL G /8 3 G / G /. G 3/8. G 3/8 G /2 M6 x M6 x M8 x. M8 x. M x. M x. 6 M x. 6. M x. 8 M x. 8 M x. M x. M x

43 ISO Cylinder: Smooth cylinder Double cting, Single Rod Series C6Y ø, ø, ø, ø, ø, ø0, ø With au switch C6YD Stroke Refer Maximum Stroke on page 2. pplicable u Switches/Tie-rod Mounting Type Solid state switch Reed switch B L F G C D T Special function Diagnosis indication (2-colour) Water resistant (2-colour) Diagnosis output (2-colour) Strong magnetic field resistant (2-colour) Diagnosis indication (2-colour) Built-in magnet Mounting Basic/Without bracket xial foot Rod end flange ead end flange Single clevis Double clevis Centre trunnion Electrical entry Grommet Terminal conduit Grommet Grommet Terminal conduit DIN Grommet Indicar light Yes Yes None None Yes 0 Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 2-wire Lead wire length symbols: 0. m (Example) MNW m M (Example) MNWM 3 m L (Example) MNWL m Z (Example) MNWZ ow Order B 0 MBW S mm mm mm mm mm 0 mm mm 3-wire (NPN) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire -wire (NPN) 2-wire (Nonpolar type) 3-wire (Equiv. NPN) 2 V 2 V 2 V Load voltage DC C V, V V V, V V V, V u switch model Band mounting Tie-rod mounting MN MP MB J MNW MPW MBW MN MP MB FF PDW Solid state switches marked with are produced upon receipt of order. Since there are other applicable au switches than listed, refer the au switch guide. For details about au switches with pre-wired connecr, refer the au switch guide. D-, M, MW, ML are shipped gether, (but not assembled). (Switch mounting bracket is only assembled at the time of shipment.) Water resistant type au switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Consult with SMC regarding water resistant types with the above model numbers. V V, V V V, V V V 0 V, 0 V 0 V 0 V, 0 V 0 V or less 0 V, 0 V W G3 K Number of au switches S 3 n Lead wire length (m) 0. () 2 pcs. pc. 3 pcs. n pcs. u switch Without au switch For applicable au switch model, refer the below table. (M) 3 (L) (Z) Pre-wired connecr pplicable load IC IC IC IC IC IC IC Relay, PLC Relay, PLC PLC Relay, PLC CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order

44 Series C6Y Designed with a low sliding resistance of the pisn, this air cylinder is ideal for applications such as contact pressure control, which requires smooth movements at low pressure. Low sliding resistance Min. operating pressure 0.0MPa Sliding resistance Bi-directional low-friction operation possible. Pressure can be controlled regardless of its direction. Pressure equivalent sliding resistance MPa C6SD C6YD Pressure MPa Specifications pplication Example Smooth cylinder combined with precision regular (e.g. Series IR) Example Driving roller Example B f Winding roller Precision regular Precision regular (Transfer object) Minimum Stroke for u Switch Mounting Refer page 8 for Minimum Stroke for u Switch Mounting. ction Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Lubrication Operating pisn speed llowable stroke lerance Cushion Port size Mounting 0 Double acting ir.0 MPa 0.7 MPa 0.02 MPa 0.0 MPa Without au switch: 70 C With au switch: 60 C Not required (Non-lube) 0 mm/s +.0 Up 2 st:, 00 st: Non G /8 G / G / G 3/8 G 3/8 G /2 G /2 Basic, xial foot, Rod end flange, ead end flange, Single clevis, Double clevis, Centre trunnion llowable air leak 0. l/min (NR) No freezing Dimensions are the same as standard type. Refer page 3 for details. Maximum stroke 0 Intermediate strokes are available. Please consult with SMC for longer strokes. 0 Max. stroke ccessories 2 Standard Option Mounting Rod end nut Clevis pin Pisn rod ball joint Rod clevis Rod boot Basic Foot Rod end flange ead end flange Single clevis Double clevis Centre trunnion Please do not use a pisn rod ball joint (or floating joint) gether with a head end clevis with a ball joint (or angled head end clevis with a ball joint).

45 ISO Cylinder: Smooth cylinder Double cting, Single Rod Series C6Y [First angle projection]!0!8!2 q e r CP6K CP6 ø ø!! i u ø ø0 Pisn rod ø ø (No flat washer for ø) -CP6 Component Parts No. Description Material Note Rod cover 2 ead cover 3 Cylinder tube Pisn rod Pisn 6- Cushion ring 6-2 Cushion ring 7 Tie-rod 8 Tie-rod nut Flat washer Rod end nut Cushion valve Bushing 3 Snap ring Rod seal holder Snap ring Wearing Pisn seal Rod seal Cylinder tube gasket Cushion valve seal 2 Pisn gasket Spring washer 23 Pisn nut 2 Magnet luminium die-casted luminium die-casted luminium alloy Carbon steel luminium alloy Steel Steel Carbon steel Steel Steel Steel Steel wire Bearing alloy Steel for spring Stainless steel Steel for spring Resin NBR NBR NBR NBR NBR Steel Steel ø and ø0 ø ø ø ø 0 io ø Pisn rod Replacement Parts: Seal Kit Kit no. C6Y-PS C6Y-PS C6Y-PS C6Y-PS C6Y-PS C6Y0-PS C6Y-PS Contents Kits include items!6!. Seal kits consist of items!6! contained in one kit, and can be orderd using the number for each respective tube bore size. Do not use grease not specified. Order using the following part numbers when only maintenance grease is needed. Volume Part no. g GR-L-00 g GR-L-0 g GR-L- -C6 C6Y C6K C6 u Switch Simple Specials Made Order 3

46 Smooth Cylinder Specific Product Be sure read before handling. Refer Back cover for Safety Instructions and pages 6 70 for ctuar and u Switch. Recommended Pneumatic Circuit Refer the diagrams below when controlling speed with the smooth cylinder. Warning orizontal operation (Speed control) I II Dual speed controller Speed is controlled by meter-out circuit. Using concurrently the meter-in circuit can alleviate the stick-slip. More stable low speed operation can be achieved than meter-in circuit alone. Meter-in speed controller Meter-in speed controllers can reduce lurching while controlling the speed. The two adjustment needles facilitate adjustment. Vertical operation (Speed control) I II P2 W P a (c) (b) P0 P0 a W () Speed is controlled by meter-out circuit. Using concurrently the meter-in circuit can alleviate the stick-slip. (2) Depending on the size of the load, installing a regular with check valve at position (b) can reduce lurching during descent and operation delay during ascent. s a guide, when W + P0a>P0, adjust P make W + Pa = P0. () Speed is controlled by meter-out circuit. Using concurrently the meter-in circuit can alleviate the stick-slip. (2) Installing a regular with check valve at position (c) can reduce lurching during descent and operation delay during ascent. s a guide, adjust P2 make W + P2 = P0a. W: Load (N) P0: Operating pressure (MPa) P, P2: Reduced pressure (MPa) a: Rod side pisn area (mm 2 ) : ead side pisn area (mm 2 )

47 Smooth Cylinder Specific Product 2 Be sure read before handling. Refer Back cover for Safety Instructions and pages 6 70 for ctuar and u Switch. Caution Lubricant. Operate without lubrication. Lubrication may cause malfunction. 2. Do not use grease not specified by SMC. Using grease other than that specified may cause malfunction. Order using the following part numbers when only maintenance grease is needed. Grease Volume g g g Part no. GR-L-00 GR-L-0 GR-L- 3. Do not wipe off grease from the sliding part of the air cylinder. Wiping grease from the sliding part of the air cylinder forcefully may cause malfunction. Caution ir Source. Take measure prevent pressure fluctuations. Pressure fluctuations may cause malfunction. CP6 CP6K Simple Specials Made Order -CP6 -C6 C6Y C6K C6 u Switch

48 6

49 ISO Cylinder: Double cting Series -C6 ø, ø, ø, ø, ø, ø0, ø ow Order CP6 TEX category 2 S K Y Pisn rod type Standard Non-rotating rod (~0 only) Smooth cylinder Built-in magnet B L F G C D T Mounting Basic/Without bracket xial foot Rod end flange ead end flange Single clevis Double clevis Centre trunnion [For -C6] When using an u switch, select the appropriate switch from the following table and order it separately. pplicable au switch specifications u switch only conforms Category 3. (II 3GD EEx n II Tx - C Ta +60 C IP67.) For detailed specifications on the D-M, D-MW, D-3 and D-0, please refer the au switch guide. (Note: Reed au switches for C 0V and DC 0V are not within the specification.) Type Solid state switch Reed switch D-MN-88 D-MP-88 D-MB-88 D-MNW-88 D-MPW-88 D-MBW-88 D-3-88 D-0-88 When ordering a tie rod mounting type au switch, also order a mounting bracket from the following listat the same time. u switch mounting bracket/ Part no. (Tie rod mounting) u switch Tube I.D. Model,,, D-MN-88 D-MP-88 D-MB-88 D-MNW-88 D-MPW-88 D-MBW-88 D-3-88 D-0-88 Special function Diagnosis indication (2-colour) -C6SD Model No. 0 Electrical entry Grommet Grommet B mm mm mm mm mm 0 mm mm Indicar Yes Yes None Lead wire length symbols: 0. m (Example) D-MBW-88 m M (Example) D-MBWM-88 3 m L (Example) D-MBWL-88 m Z (Example) D-MBWZ-88 BMB-0 B7-0 B7-0 B7-0 0 W Made order -X -XC -XC7 -XC -XC -XC68 Rod Specifications Single rod W Double rod Not available in smooth cylinder Stroke Refer standard stroke table Classification Without magnet type 2 GD c T 8 C (T) Ta - C C T C (T) Ta C 60 C Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 2-wire 2 V 2 V Note ) DC Load voltage V, V V V, V V C 0 V V 0 V or less 0. () Standard Special rod end change With heavy duty scraper ( ~ 0 only) Tie rod, cushion valve, tie-rod nut, etc, made of stainless steel Trunnion position change Fluororubber seals Stainless steel rod and nut Only for Standard type (M) With magnet type D T 8 C (T) Ta - C C T C (T) Ta C 60 C Lead wire (m) 3 (L) (Z) solid state au switch is available after receiving an order. pplicable load IC IC IC Relay PLC Relay PLC Note 2) When mounting an au switch on a - series (Category 2) Model, the TEX category of the au switch cylinder changes Category 3, which is the same category as the au switch. 7 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order

50 Series C6 u Switch Mounting Minimum Stroke for u Switch Mounting D- D-V D-M D-MW D-MV D-MWV D-ML D-MVL D-3 D-G3 D-K3 D- D- D-6 D-W D-F D-J D-FW D-JW D-FBL D-FF D-FNTL D-Z7 D-Z D-Y D-Y7P D-Y7W D-Y6 D-Y7PV D-Y7WV D-Y7BL D-PDWL 8 u switch model Number of au switch mounted switch, 2 switches (Different side, 70 Same side) 70 + (n )/2 Other qty. n =, 8,, switch, 2 switches (Different side, Same side) + (n )/2 Other qty. n =, 8,, switch, 2 switches (Different side, Same side) Other qty. switch, 2 switches (Different side, Same side) Other qty. ø ø ø ø ø ø0 ø ø, ø, ø, ø ø, ø0 ø 7 + (n )/2 n =, 8,, + (n )/2 n =, 8,, switch, 2 switches (Different side, Same side) + (n 2)/2 Other qty. n =, 8,, switch, 2 switches (Different side, Same side) + (n 2)/2 Other qty. n =, 8,, 2 switches (Different side) 2 switches (Same side) Other qty. (Different side) Other qty. (Same side) switch 2 switches (Different side) 2 switches (Same side) Other qty. (Different side) Other qty. (Same side) switch switch, 2 switches (Different side, Same side) Other qty. (Same side) 2 switches (Different side, Same side) Other qty. (Same side) switch 2 switches (Different side, Same side) Other qty. (Same side) switch 2 switches (Different side, Same side) Other qty. (Same side) switch (n )/2 n =, 8,, + (n )/2 n =, 8,, + (n )/2 n =, 8,, + (n )/2 n =, 8,, 8 + (n 2)/2 n =, 8,, 60 + (n 2)/2 n =, 8,, + (n )/2 8 + (n )/2 + (n )/2 0 + (n )/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, + (n )/ (n )/ (n )/2 7 + (n )/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, 8 + (n )/2 0 + (n )/2 + (n )/2 + (n )/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, 60 + (n )/2 6 + (n )/ (n )/2 + (n )/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, 0 + (n 2)/2 + (n 2)/2 0 + (n 2)/2 + (n 2)/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, 6 + (n 2)/ (n 2)/2 7 + (n 2)/2 8 + (n 2)/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, + (n 2)/2 n = 2,, 6, (n 2)/2 n = 2,, 6, (n )/2 n =, 8,, 60 + (n )/2 n =, 8,, + (n )/2 n =, 8,, 70 + (n )/2 8 + (n )/2 n =, 8,, n =, 8,, + (n )/2 + (n )/2 n =, 8,, n =, 8,, + (n )/2 + (n )/2 n =, 8,, n =, 8,, + (n )/2 n =, 8,, + (n )/2 n =, 8,, + (n 2)/2 n = 2,, 6, 8 + (n 2)/2 n = 2,, 6, (n 2)/2 n = 2,, 6, (n 2)/2 n = 2,, 6, (n 2)/2 n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, 8 + (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) + 0 (n 2) + 0 (n 2) + 0 (n 2) n = 2,, 6, 8 n = 2,, 6, 8 n = 2,, 6, 8 n = 2,, 6, 8 + (n 2)/2 n = 2,, 6, (n 2) n = 2, 3, (n 2) n = 2, 3, (n 2) n = 2,, 6, (n 2) n = 2,, 6, 8 + (n 2)/2 n = 2,, 6, (n )/2 n =, 8,, 0 + (n 2)/2 n = 2,, 6, (n )/2 n =, 8,, (n 2) n = 2,, 6, (n 2) n = 2,, 6, 8 Centre trunnion + (n 2) n = 2,, 6, 8 + (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, (n 2) n = 2,, 6, 8 Support bracket other than Centre trunnion 3 + (n 2) n = 2, 3, + (n 2) n = 2, 3, (n )/2 + (n )/2 + (n )/2 + (n )/2 + (n )/2 + (n 2)/2 + (n 2)/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, n =, 8,, n = 2,, 6, 8 n = 2,, 6, 8 0 switch, 2 switches (Different side, 8 Same side) Other qty. + (n )/2 8 + (n )/2 n =, 8,, n =, 8,, switch, 2 switches (Different side, Same side) Other qty (n )/2 n =, 8,, switch, 2 switches (Different side, 8 Same side) 8 + (n )/2 Other qty. n =, 8,, switch, 2 switches (Different side, Same side) Other qty. + 6 (n )/2 n =, 8,, + (n )/2 + (n )/2 + (n )/2 + (n )/2 + (n )/2 + (n 2)/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, n =, 8,, n = 2,, 6, (n )/2 n =, 8,, 0 + (n )/2 n =, 8,, + (n )/2 0 + (n )/2 + (n )/2 n =, 8,, n =, 8,, n =, 8,, + (n 2)/2 n = 2,, 6, (n )/2 7 + (n )/2 n =, 8,, n =, 8,, 8 + (n )/2 n =, 8,, + (n 2)/2 n = 2,, 6, (n )/2 + (n )/2 + (n )/2 + (n )/2 n =, 8,, n =, 8,, n =, 8,, n =, 8,, + (n 2)/2 n = 2,, 6, (n )/2 n =, 8,, + 6 (n )/2 n =, 8,, + 6 (n )/2 n =, 8,, + 6 (n )/2 n =, 8,, + (n 2)/2 n = 2,, 6, (n 2)/2 n = 2,, 6, 8 + (n 2)/2 n = 2,, 6, (n 2)/2 n = 2,, 6, 8

51 u Switch Mounting Series C6 u Switch Proper Mounting Position (Detection at Stroke End) and Its Mounting eight [First angle projection] t s u switch CP6 B CP6K u Switch Proper Mounting Position u switch model 0 D- D-V B D-M D-MV D-MW D-MWV D-ML D-MVL.. B D- D B D-W B Note) djust the au switch after confirming the operation set actually. u Switch Proper Mounting eight u switch model D- D-M D-MW D-ML 0 s t D-V s t D-MV D-MWV D-MVL s t D- D-6 D-W s t D-FW D-JW D-F D-J D-FBL D-FF B... D-F D-J D-FF D-FW D-JW D-FBL D-FNTL s t D-FNTL..... B... D-3 D-G3 D-K3 s t D-3 D- D-G3 D-K B D- s t D-Z7 D-Z D-Y D-Y6 D-Y7P D-Y7PV D-Y7W D-Y7WV D-Y7BL B D-PDWL B.... D-Z7 D-Z D-Y6 D-Y D-Y7PV D-Y7P D-Y7WV D-Y7W D-Y7BL s t s t D-PDWL s t CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order

52 Series C6 u Switch Mounting 2 u Switch Mounting Bracket Part No. u switch model ø ø ø ø ø ø0 ø D-/V D-M/MV D-MW/MWV D-ML/MVL BMB-0 BMB-0 B7-0 B7-0 B7-0 B7-0 B7-0 D-3/ D-G3/K3 BMB2-0 BMB2-0 BMB-0 BMB-0 BMB-0 BMB-0 BS- D-/6 D-W D-F/J D-FW/JW D-FF D-FBL D-FNTL D-PDWL BT-03 BMB3T-0 BT-03 BMB3T-0 BT-0 BMB3T-0 BT-0 BMB3T-0 BT-06 BMB3T-0 BT-06 BMB3T-0 BT-08 BP2T-0 Mounting example for D-(V), M(V), MW(V), M(V)L D-Z7/Z D-Y/Y6 D-Y7P/Y7PV D-Y7W D-Y7WV D-Y7BL BMB-0 BMB-0 BMB-0 BMB-0 B-0 B-0 B-0 [Mounting screws set made of stainless steel] The following set of mounting screws made of stainless steel is also available. Use it in accordance with the operating environment. (Please order the mounting bracket separately, since it is not included.) BB: For D-/6/F/J Note ) For details on BB, refer page 6. D-FBL switch is set on the cylinder with the stainless steel screws above when shipped from facry. When a switch is shipped independently, BB screws are attached. Note 2) When using type D-M(V)L or Y7BL, please do not use the iron set screws included with the au switch mounting bracket (BMB-0, B7-, BB-, B-) shown above, instead order the set of stainless steel set screws (BB), and please use the stainless steel set screws (M x 6L) included in BB. Operating Range u switch model 0 D-/V D-M/MV D-MW/MWV D-ML/MVL D-Z7/Z D-/6 D-W D-3/ D-Y/Y6 D-Y7P/Y7V D-Y7W/Y7WV D-Y7BL D-F/J D-FW/JW D-FBL/FNTL D-FF D-G3/K3 D-PDWL... Since this is a guideline including hysteresis, not meant be guaranteed. (ssuming approximately ±% dispersion.) There may be the case it will vary substantially depending on an ambient environment.

53 u Switch Mounting Series C6 Besides the models listed ow Order, the following au switches are applicable. For detailed au switch specifications, refer the au switch guide. Type Solid state switch Reed switch Warning u switch model D-MNV, MPV, MBV D-Y6, Y6B, Y7PV D-MNWV, MPWV, MBWV D-Y7NWV, Y7PWV, Y7BWV D-MNVL, MPVL, MBVL D-Y, YB, Y7P D-F, FP, J D-Y7NW, Y7PW, Y7BW D-FW, FPW, JW D-FBL, Y7BL D-FNTL D-PDWL D-3V, 6V D-0V D-67, Z D-3,, 6, Z73, Z76 Electrical entry Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) For details about au switches with pre-wired connecr, refer the au switch guide. Normally closed (NC = b contact), solid state switch (D-FG, F, Y7G, Y7 type) are also available. For details, refer the au switch guide. Specific Product djustment Features. Do not open the cushion valve above the spper. Cushion valves are provided with a crimp (ø) or a retaining ring (ø ø) as a spping mechanism, and the cushion valve should not be opened above that point. If air is supplied and operation started without confirming the above condition, the cushion valve may be ejected from the cover. 2. Be certain activate the air cushion at the stroke end. When it is intended use the cushion valve in the fully opened position, select a style with a damper. If this is not done, the tie-rods or pisn rod assembly will be damaged. 3. When replacing brackets, use the hexagon wrenches shown below. Diagnosis indication (2-colour) Water resistant (2-colour) Diagnosis indication (2-colour) Water resistant (2-colour) With timer Strong magnetic field resistant (2-colour) Without indicar light CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch,,, 0 Width across flats 6 Tightening rque (N m) Simple Specials Made Order

54 tex Compliant Solid State u Switch With Pre-wired Connecr Refer SMC website for the details of the products conforming the international standards. With Pre-wired Connecr II 3GD Ex n II Tx - C Ta +60 C II 3GD td IP67 T3 C X Eliminates the harnessing work by cable with connecr specifications dopts global standardised connecr (IEC7--2) IP67 construction Note) ll other specifications (dimensions, drawings, etc.) are the same as the non TEX type. ow Order Solid state au switch Standard part no. For the applicable au switch model, refer the table below. D- MN S PC -88 Suffix for TEX certified CT.3 Cable length S M 0. m.0 m Connecr model B D M8-3 pin M8 - pin M - pin Connecr Specifications Connecr model M8-3 pins M8- pins M- pins 2 Pin arrangement Conformed standard Impact resistance Enclosure Insulation resistance Withstand voltage 3 3 JIS C 2, JIS C, IEC 7--2, NEC 02 0 m/s 2 IP-67 (IEC602 standard) 0 MΩ or more at 0 VDC Mega VC minute (between contacts), leak current m or less 2 3 pplicable u Switch Mounting style Tie-rod Direct Function Electrical entry pplicable model 2-colour indication Grommet (In-line) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) This category 3 type auswitch can only be used in zones 2 and. FP Y7P Y7PV MN, MP, MB MNV, MPV, MBV MNW, MPW, MBW MNWV, MPWV, MBWV Lead wire lenght (m)

55 Solid State u Switch With Pre-wired Connecr Refer SMC website for the details of the products conforming the international standards. With Pre-wired Connecr Eliminates the harnessing work by cable with connecr specifications dopts global standardised connecr (IEC7--2) IP67 construction CP6 ow Order D- MN S Solid state au switch Standard part no. For the applicable au switch model, refer the table below. Cable length S M L 0. m.0 m 3.0 m Connecr Specifications Connecr model M8-3 pins M8- pins M- pins 2 Pin arrangement Conformed standard Impact resistance Enclosure Insulation resistance Withstand voltage 3 3 JIS C 2, JIS C, IEC 7--2, NEC 02 0 m/s 2 IP-67 (IEC602 standard) 0 MΩ or more at 0 VDC Mega VC minute (between contacts), leak current m or less 2 3 Connecr model B D PC M8-3 pin M8 - pin M - pin CP6K -CP6 -C6 C6Y C6K C6 pplicable u Switch Mounting style Rail Tie-rod Direct Function Electrical entry pplicable model Magnetic field resistant 2-colour indication Diagnostic output Water resistant With timer 2-colour indication Water resistant Grommet (In-line) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) PDW F, FP, J FW, FPW JW FF FB FNT Y, Y7P, YB Y6, Y7PV, Y6B MN, MP, MB MNV, MPV, MBV Y7NW, Y7PW, Y7BW Y7NWV, Y7PWV, Y7BWV MNW, MPW, MBW MNWV, MPWV, MBWV Y7B MN, MP, MB MNV, MPV, MBV Lead wire lenght (m) u Switch Simple Specials Made Order 3

56 Series C6 ow Mount and Move the u Switch Mounting Bracket <pplicable u Switch> Solid state switch D-G3, D-K3 Reed switch D-33, D-3, D- ow Mount and Move the u Switch D-3, D-G3/K3 type u switch Tie-rod Mounting u switch mounting screw M x 0.8 x L ook <pplicable u Switch> Solid state switch D-MN(V), D-MP(V), D-MB(V) D-MNW(V), D-MPW(V), D-MBW(V) D-MN(V), D-MP(V), D-MB(V) Reed switch D-0(V), 3(V), 6(V) ow Mount and Move the u Switch u switch mounting screw M2. x 0. x L exagon socket head set screw M r Watchmaker s (precision) screwdriver w e Put the au switch on the surface of the cylinder tube. u switch mounting band q u switch mounting bracket u switch D- type u switch u switch mounting screw M x 0.8 x L Tie-rod u switch mounting band ook. Loosen the au switch mounting screws at both sides pull down the hook. 2. Put an au switch mounting band on the cylinder tube and set it at the au switch mounting position, and then hook the band. 3. Screw lightly the au switch mounting screw.. Set the whole body the detecting position by sliding, tighten the mounting screw secure the au switch. (The tightening rque should be about 2 3 N m.). Modification of the detecting position should be made in the state of 3. u Switch Mounting Bracket Part No. (Band) Cylinder series C6 BMB2-0 BMB2-0 pplicable bore size BMB -0 BMB -0 BMB -0 0 BMB -0 BS -. Fix it the detecting position with a set screw by installing an au switch mounting bracket in cylinder tie-rod and letting the botm surface of an au switch mounting bracket contact the cylinder tube firmly. 2. Fix it the detecting position with a set screw (M). (Use a hexagon wrench.) 3. Fit an au switch in the au switch mounting groove set it roughly the mounting position for an au switch.. fter confirming the detecting position, tighten up the mounting screw (M2.) attached an au switch, and secure the au switch.. When changing the detecting position, carry out in the state of 3. Note ) To protect au switches, ensure that main body of an au switch should be embedded in au switch mounting groove with a depth of mm or more. Note 2) Set the tightening rque of a hexagon socket head set screw (M) be.0.2 N m. Note 3) When tightening an au switch mounting screw (M2.), use a watchmaker s screwdriver with a grip diameter of 6 mm. lso, set the tightening rque be N m. s a guide, turn 0 from the position where it comes feel tight. u Switch Mounting Bracket Part No. (Including Bracket, Set Screw) Cylinder series C6 BMB -0 BMB -0 Cylinder tube pplicable bore size B7-0 B7-0 B7-0 0 B7-0 B7-0 Note ) When using type D-M(V)L, please order stainless steel screw set BB separately (page 6), and use the stainless steel set screws, after selecting set screws of the appropriate length for the cylinder seriesas shown in the table above. Note 2) Colour or gloss differences in the metal surfaces have no effect on metal performance. The special properties of the chromate (trivalent) applied the main body of the au switch mounting bracket for B7- and BMB- result in differences in coloration depending on the production lot, but these have no adverse impact on corrosion resistance.

57 ow Mount and Move the u Switch Series C6 <pplicable u Switch> Solid state switch D-Y B, Y6 B, D-Y7P(V) D-Y7NW(V), Y7PW(V), Y7BW(V) D-Y7BL Reed switch D-Z73, Z76, Z ow Mount and Move the u Switch Note ) When tightening an au switch mounting screw, use a watchmaker s screwdriver with a handle diameter of 6 mm. lso, set the tightening rque be N m. s a guide, turn 0 from the position where it comes feel tight. Set the tightening rque of a hexagon socket head set screw (M x 0.7) be.0.2 N m.. Fix it the detecting position with a set screw by installing an au switch mounting bracket in cylinder tie-rod and letting the botm surface of an au switch mounting bracket contact the cylinder tube firmly. (Use a hexagon wrench.) 2. Fit an au switch in the au switch mounting groove set it roughly the mounting position for an au switch. 3. fter confirming the detecting position, tighten up the mounting screw attached an au switch, and secure the au switch.. When changing the detecting position, carry out in the state of 2. To protect au switches, ensure that main body of an au switch should be embedded in au switch mounting groove with a depth of mm or more. Cylinder series C6 Watchmaker s (precision) screwdriver Note 2) exagon socket head set screw M x 0.7 x 6 L u Switch Mounting Bracket Part No. (Including Bracket, Set Screw) BMB -0 BMB -0 Tie-rod pplicable bore size BMB -0 BMB -0 B -0 u switch u switch mounting screw u switch mounting bracket 0 B -0 B -0 Note 2) When using type D-Y7BL, please order stainless steel screw set BB separately (page 6), and use the stainless steel set screws, after selecting set screws of the appropriate length for the cylinder series as shown in the table above. <pplicable u Switch> Solid state switch D-PDWL ow Mount and Move the u Switch. Slightly screw the hexagon socket head cap screw (M x 0.7 x 8 L) in the M tapped portion of au switch mounting bracket. (2 locations) Use caution that the tip of the hexagon socket head cap screw should not stick out the concave portion of au switch mounting bracket. 2. Put a hexagon socket head cap screw (M3 x 0. x L) through the au switch's through-hole (2 locations), and then push it down in the M3 tapped part on the au switch mounting bracket while turning it lightly. 3. Place the concave part of the au switch mounting bracket in the cylinder tie-rod, and slide the au switch mounting bracket in order set roughly the detecting position.. fter reconfirming the detecting position, tighten the M3 mounting screw secure the au switch by making the botm face of au switch attached the cylinder tube. (Tightening rque of M3 screw should be N m.). Tighten up M screw of au switch mounting bracket secure the au switch mounting bracket. (Ensure that tightening rque of M screw should be set.0.2 N m.) u Switch Mounting Bracket Part No. (Including Bracket, Screw) Cylinder series C6 BMB3T -0 exagon socket head cap screw M x 0.7 x 8 L BMB3T -0 Tie-rod exagon socket head cap screw M3 x 0. x L pplicable bore size BMB3T -0 BMB3T -0 BMB3T -0 u switch mounting bracket u switch 0 BMB3T -0 BP2T -0 CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order

58 Series C6 ow Mount and Move the u Switch 2 Mounting Bracket Tie-rod Mounting <pplicable u Switch> Solid state switch D-F, D-FP D-J, D-J, D-FBL D-FW, D-FPW, D-JW D-FF, D-FNTL Reed switch D-3, D-, D-6, D-6, D-67 D-W u switch mounting screw (M) u switch u switch mounting bracket Set screw (M). Fix the au switch on the au switch mounting bracket with the au switch mounting screw (M) and install the set screw. 2. Fit the au switch mounting bracket in the cylinder tie-rod and then fix the au switch at the detecting position with the hexagonal wrench. (Be sure put the au switch on the surface of cylinder tube.) 3. When changing the detecting position, loosen the set screw move the au switch and then re-fix the au switch on the cylinder tube. (Tightening rque of M screw should be.0.2 N m.) Tie-rod u Switch Mounting Bracket Part No. (Including Bracket, Screw, Set Screw) Cylinder series C6 BT-03 BT-03 pplicable bore size BT-0 BT-0 BT-06 0 BT-06 BT-08 [Mounting screws set made of stainless steel] The following set of mounting screws made of stainless steel is also available. Use it in accordance with the operating environment. (Please order the au switch mounting bracket separately, since it is not included.) BB: For D-/6/F/J D-FBL switch is set on the cylinder with the stainless steel screws above when shipped from facry. When a switch is shipped independently, BB screws are attached. u Switch Mounting Screw Set Part no. BB No. 2 3 Contents Description u switch mounting screw Set screw Set screw Size M x 0.7 x 8L M x 0.7 x 6L M x 0.7 x 8L pplicable au switch Quantity mounting bracket part no. BT- BT-03, BT-0, BT-0 BT-06, BT-08, BT- B-0, B-0, B-0 2 BMB-0, BMB-0 BMB-0 B7-0, B7-0, B7-0 BT-, BT-, BT- 2 BS-, BS-0 BS-, BS-0 BS-, BS-0 BS-, BS-0 pplicable au switch D-, 6 D-F, J D-Z7, Z8 D-Y, Y6, Y7 D- D-M D-, 6 D-F, J D-Z7, Z8 D-Y, Y6, Y7 D- D-M 6

59 Series CP6/C6 Simple Specials These changes are dealt with Simple Specials System. pplicable Series Series C6 Change of Rod End Shape Description Standard type Smooth type CP6 Standard type Model C6S C6SW C6Y CP6S CP6SW ction Double acting, Single rod Double acting, Double rod Double acting, Single rod Double acting, Single rod Double acting, Double rod Symbol for change of rod end shape X0 X0 X0 X0 X0 Symbol : 0 Symbol : Symbol : 2 Symbol : 3 C C0. Symbol -X0 X. SMC will make appropriate arrangements if no dimension, lerance, or finish instructions are given in the diagram. 2. Standard dimensions marked with will be as follows the rod diameter (D). Enter any special dimension you desire. D 6 D mm, 6 < D D 2 mm, D > D mm 3. In the case of double rod type and single acting retraction type, enter the dimensions when the rod is retracted.. Only the single side of a double rod is able manufacture. ød Symbol : ørd CP6 CP6K -CP6 Symbol : Symbol : 6 Symbol : 7 W Symbol : R sphere ørd T W L B TP MM L Symbol : R sphere MM Symbol : Symbol : Symbol : 3 Symbol : T Symbol : Symbol : Symbol : Symbol : Symbol : C ød L ød MM C0. R sphere L W ød MM Symbol : 8 B L MM ødc C ød MM L C0.file chamfer C T W W L ød MM C MM -C6 C6Y C6K C6 Symbol : Symbol : 2 Symbol : Symbol : 23 MM L K Symbol : Symbol : 26 Symbol : 27 Symbol : MM W L L K T MM C ødb MM MM T ød L LB K MM ødb ød T ød MM MM ød L W C ørd L B Symbol : 28 ød L Symbol : 2 MM L Symbol : 2 MM W T L L u Switch Simple Specials Made Order 7

60 Simple Specials 2 -XC: Change of Trunnion Bracket Mounting Position These changes are dealt with Simple Specials System. 2 Change of Trunnion Bracket Mounting Position Symbol -XC The position for mounting the trunnion pivot bracket on the cylinder can be moved from the standard mounting position any desired position. pplicable Series Series C6 Description Standard type Model C6 C6W ction Double acting, Single rod Double acting, Double rod Note (Z + /2 stroke) = Trunnion position for -XC Trunnion position for -XCB. Specify Z + /2 stroke in the case the trunnion bracket position is not -XC, B or trunnion is not a center trunnion. 2. SMC will make appropriate arrangements if no dimension, lerance, or finish instructions are given in the diagram. 3. The possible range of trunnion bracket mounting position is indicated in the table below.. Some trunnion mounting positions do not allow au switch mounting. Please consult with SMC for more information. Series C6 Symbol Trunnion bracket position Minimum For -XC Maximum Reference : Standard (Centre trunnion) Minimum stroke stroke + stroke 6 + stroke. + stroke. + stroke. + stroke. + stroke + 0. stroke stroke stroke stroke + 0. stroke stroke + 0. stroke 0 8

61 Series CP6/C6 Made Order Specifications Contact SMC for detailed dimensions, specifications, and lead times. Made Order 3 eat Resistant Cylinder ( C) Symbol -XB6 ir cylinder which changed the seal material and grease, so that it could be used even at higher temperature up from C. pplicable Series Series CP6 C6 Description ir cylinder ir cylinder ow Order Specifications Model CP6S CP6SW C6S C6SW Standard model no. mbient temperature range Seals materials Grease Specifications other than above and external dimensions Warning eat resistant cylinder ction Double acting, Single rod Double acting, Double rod Double acting, Single rod Double acting, Double rod XB6 C Fluororubber eat resistant grease Same as standard type Be aware that smoking cigarettes, etc. after your hands have come in contact with the grease used in this cylinder can create a gas that is hazardous humans. pplicable Series Series C6 Cold Resistant Cylinder ( 70 C) Description ir cylinder ow Order Specifications Standard model no. mbient temperature range Seals material Grease u switch Dimensions dditional specifications Warning Model C6S ction Double acting, Single rod Cold resistant cylinder XB7 70 C Low nitrile rubber Cold resistant grease Not mountable Same as standard type Same as standard type Be aware that smoking cigarettes, etc. after your hands have come in contact with the grease used in this cylinder can create a gas that is hazardous humans. Note Note Except with switch, Mounting bracket is available with basic only, Minimum operating pressure 0.2 MPa Page (for std. model) Page Page 26 Note ) Operate without lubrication from a pneumatic system lubricar. Note 2) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note 3) In principle, it is impossible make built-in magnet type and the one with au switch. But, as for the one with au switch, and the heat resistant cylinder with heat resistant au switch, since it will be differed depending on the series, please contact SMC. Note ) Pisn speed is ranged from 0 mm/s. ir cylinder which changed the seal material and grease, so that it could be used even at lower temperature down C. Symbol -XB7 Page (for std. model) Page 26 Note ) Operate without lubrication from a pneumatic system lubricar. Note 2) Use dry air which is suitable for heatless air dryer, etc. not cause the moisture be frozen. Note 3) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note ) Mounting au switch is impossible. CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order

62 Series CP6/C6 Made Order Specifications 2 Contact SMC for detailed dimensions, specifications, and lead times. Made Order With eavy Duty Scraper Symbol -XC It is suitable for using cylinders under the environment, where there are much dusts in a surrounding area by using a heavy duty scraper on the wiper ring, or using cylinders under earth and sand exposed the die-castied equipment, construction machinery, or industrial vehicles. pplicable Series Series CP6 C6 Description ir cylinder ir cylinder Model CP6S CP6SW C6S C6SW ction Double acting, Single rod Double acting, Double rod Double acting, Single rod Double acting, Double rod Note ø ø0 ø ø0 ø ø0 ø ø0 Page (for std. model) Page Page 26 ow Order Standard model no. XC With heavy duty scraper (SCB scraper) Specifications: Same as standard type. Dimensions: Same as standard type. Caution Do not replace heavy duty scrapers. Since heavy duty scrapers are press-fit, do not replace the cover only, but rather the entire rod cover assembly. 6 Tie-rod, Cushion Valve, Tie-rod Nut, etc. Made of Stainless Steel Symbol -XC7 When using in locations where the rust generation or corrosion likelihood exists, the standard parts material have been partly changed the stainless steel. pplicable Series Series CP6 C6 Description ir cylinder ir cylinder Model ction Page (for std model) CP6S C6S Double acting, Single rod Double acting, Single rod CP6SW C6SW Double acting, Double rod Double acting, Double rod Page Page 26 ow Order Standard model no. XC7 Specifications Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel Component parts changed stainless steel dditional specifications Dimensions Tie-rod, Tie-rod nut, Mounting bracket nut, Spring washer, Cushion valve, Lock nut Same as standard type Same as standard type 60

63 Made Order Specifications Series CP6/C6 7 Dual Stroke Cylinder/Double Rod Type Symbol -XC Two cylinders are constructed as one cylinder in a back--back configuration allowing the cylinder stroke be controlled in three steps. pplicable Series Series CP6 C6 Description ir cylinder ir cylinder Stroke Model ction Note Page (for std. model) CP6S Double acting, Single rod Except clevis and trunnion styles Page C6S Double acting, Single rod Except clevis and trunnion styles Page 26 ow Order CP6S Mounting style Stroke + Stroke B XC C6S Dual stroke cylinder Specifications Series CP6 C6 Maximum manufacturable stroke 00 Function B DC When air pressure is supplied ports B stroke B D C and, both and B strokes retract. B D C stroke When air pressure is supplied ports and, out strokes. Stroke B B stroke Dimensions (Dimensions other than below are the same as standard type.) B D C stroke When air pressure is supplied ports and, B out strokes. When air pressure is supplied ports and, both strokes and B out strokes. CP6 CP6K -CP6 -C6 C6Y C6K C6 Stroke GC NB N L8 + Stroke ( + B) ZZ + Stroke ( + B) Stroke B u Switch GC NB N L8 + Stroke ( + B) ZZ + Stroke ( + B) ø ø ø ø ø ø0 ø L ZZ N NB GC Simple Specials Made Order 6

64 Series CP6/C6 Made Order Specifications 3 Contact SMC for detailed dimensions, specifications, and lead times. Made Order 8 Dual Stroke Cylinder/Single Rod Type Symbol -XC Two cylinders can be integrated by connecting them in line, and the cylinder stroke can be controlled in two stages in both directions. pplicable Series Series CP6 C6 Function stroke Description ir cylinder ir cylinder B B stroke B C C stroke Model ction Note Page (for std. model) CP6S Double acting, Single rod Except trunnion style Page C6S Double acting, Single rod Except trunnion style Page 26 ow Order CP6S Mounting style Stroke + Stroke B- XC C6S Dual stroke cylinder/single rod type Specifications: Same as standard type. When air pressure is supplied the port B, both and B skes retract. When air pressure is supplied from port, the rod operates for stroke. Caution. Do not supply air until the cylinder is fixed with the attached bolt. 2. If air is supplied without securing the cylinder, the cylinder could lurch, posing the risk of bodily injury or damage the peripheral equipment. B stroke B C When air pressure is supplied from port C, the rod operates for B stroke. stroke B stroke B C When air pressure is supplied from ports and C, the output force is doubled in the stroke. Dimensions (Dimensions other than below are the same as standard type.) Stroke B Stroke NB GC N L8 + Stroke ( + B) ZZ + Stroke ( + B) Stroke B Stroke L8 ZZ N NB GC 62 NB GC N L8 + Stroke ( + B) ZZ + Stroke ( + B) ø ø ø ø ø ø0 ø

65 Made Order Specifications Series CP6/C6 Fluororubber Seals Symbol -XC pplicable Series Series CP6 C6 ow Order Specifications Seal material Description ir cylinder ir cylinder Specifications other than above and external dimensions Standard model no. mbient temperature range With Coil Scraper pplicable Series Series CP6 C6 Description ir cylinder ir cylinder ow Order Model CP6S CP6SW C6S C6SW Model CP6S CP6SW C6S C6SW Standard model no. ction Double acting, Single rod Double acting, Double rod Double acting, Single rod Double acting, Double rod Fluororubber seals XC Fluororubber With au switch : 60 C (No freezing) Note) Without au switch : 70 C (No freezing) Same as standard type for each series It gets rid of frost, ice, weld spatter, cutting chips adhered the pisn rod, and protects the seals, etc. ction Double acting, Single rod Double acting, Double rod Double acting, Single rod Double acting, Double rod With coil scraper XC3 Specifications: Same as standard type. Dimensions: Same as standard type. Note Note ø ø0 ø ø0 ø ø0 ø ø0 Page (for std. model) Page Page 26 Note ) Please confirm with SMC, as the type of chemical and the operating temperature may not allow the use of this product. Note 2) Cylinders with au switches can also be produced; however, au switch related parts (au switch units, mounting brackets, built-in magnets) are the same as standard products. Before using these, please contact SMC regarding their suitability for the operating environment. Symbol -XC3 Page (for std. model) Page Page 26 CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order

66 Series CP6/C6 Made Order Specifications Contact SMC for detailed dimensions, specifications, and lead times. Made Order Made of Stainless Steel (With ard Chrome Plated Pisn Rod) pplicable for uses where rust and corrosion are expected, such as by immersing in water. pplicable Series Series Description Model ction CP6 C6 ir cylinder ir cylinder CP6S C6S Double acting, Single rod Double acting, Single rod CP6SW C6SW Double acting, Double rod Double acting, Double rod Note) There is a maximum stroke limit for C (P) 6 cylinder. Symbol -XC68 Page (for std. model) Page Page 26 Maximum Stroke Series Double acting, Single rod CP6 C6 ø : 0 ø ø0 : 00 ø : 00 ø : 00 ø ø0 : 00 ø : 00 Double acting, Double rod 00 (Same as standard type) 00 (Same as standard type) Specifications Parts changed stainless steel Other specifications and dimensions Pisn rod, Rod end nut Same as standard type ow Order Standard model no. XC68 Made of stainless steel (With hard chrome plated pisn rod) 6

67 ctuars Be sure read this before handling. Warning. There is a danger of sudden action by air cylinders if sliding parts of machinery are twisted, etc., and changes in forces occur. In such cases, human injury may occur; e.g., by catching hands or feet in the machinery, or damage the machinery itself may occur. Therefore, the machine should be designed avoid such dangers. 2. Install a protective cover when there is a risk of human injury If a driven object and moving parts of a cylinder pose a danger of human injury, design the structure avoid contact with the human body. 3. Securely tighten all stationary parts and connected parts so that they will not become loose. Especially when a cylinder operates with high frequency or is installed where there is a lot of vibration, ensure that all parts remain secure.. deceleration circuit may be required. When a driven object is operated at high speed or the load is heavy, a cylinder s cushion will not be sufficient absorb the impact. Install a deceleration circuit reduce the speed before cushioning relieve the impact. In this case, the rigidity of the machinery should also be examined.. Consider a possible drop in operating pressure due a power outage, etc. When a cylinder is used in a clamping mechanism, there is a danger of work pieces dropping if there is a decrease in clamping force due a drop in circuit pressure caused by a power outage, etc. Therefore, safety equipment should be installed prevent damage machinery and/or human injury. Suspension mechanisms and lifting devices also require consideration for drop prevention. 6. Consider a possible loss of power source. Measures should be taken protect against human injury and equipment damage in the event that there is a loss of power equipment controlled by air pressure, electricity or hydraulics, etc. 7. Design circuitry prevent sudden lurching of driven objects. When a cylinder is driven by an exhaust centre type directional control valve or when starting up after residual pressure is exhausted from the circuit, etc., the pisn and its driven object will lurch at high speed if pressure is applied one side of the cylinder because of the absence of air pressure inside the cylinder. Therefore, select equipment and design circuits prevent sudden lurching, because there is a danger of human injury and/or damage equipment when this occurs. 8. Consider emergency sps. Design so that human injury and/or damage machinery and equipment will not be caused when machinery is spped by a safety device under abnormal conditions, such as a power outage or a manual emergency sp.. Consider the action when operation is restarted after an emergency sp or abnormal sp. Design the machinery so that human injury or equipment damage will not occur upon restart of operation. When the cylinder has be reset at the starting position, install safe manual control equipment. Design and Selection Warning.Confirm the specifications. The products advertised in this catalogue are designed according use in industrial compressed air systems. If the products are used in conditions where pressure, temperature, etc., are out of specification, damage and/or malfunction may be caused. Do not use in these conditions. (Refer the specifications.) Consult SMC if you use a fluid other than compressed air..intermediate sps When intermediate spping of a cylinder pisn is performed with a 3 position closed centre type directional control valve, it is difficult achieve spping positions as accurate and precise as with hydraulic pressure due the compressibility of air. Furthermore, since valves and cylinders, etc., are not guaranteed for zero air leakage, it may not be possible hold a spped position for an extended period of time. Contact SMC in case it is necessary hold a spped position for an extended period. Caution. Operate within the limits of the maximum usable stroke. The pisn rod will be damaged if operated beyond the maximum stroke. Refer the air cylinder model selection procedure for the maximum usable stroke. 2. Operate the pisn within a range such that collision damage will not occur at the stroke end. Operate within a range such that damage will not occur when the pisn having inertial force sps by striking the cover at the stroke end. Refer the cylinder model selection procedure for the range within which damage will not occur. 3. Use a speed controller adjust the cylinder drive speed, gradually increasing from a low speed the desired speed setting.. Provide intermediate supports for long stroke cylinders. Provide intermediate supports for cylinders with long strokes prevent rod damage due sagging of the rod, deflection of the tube, vibration and external loads, etc. It is assumed the persons determining the stroke requirements have technical training and expertise in the design limitations of pneumatic equipment and are aware that death, personal injury, and property damage may result from the improper use of these products. Proper use is the users responsibilty. CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order 6

68 ctuars 2 Be sure read this before handling. Caution Mounting. Be certain align the rod axis with the load and direction of movement when connecting. When not properly aligned, the rod and tube may be twisted, and damage may be caused due wear on areas such as the inner tube surface, bushings, rod surface and seals. 2. When an external guide is used, connect the rod end and the load in such a way that there is no interference at any point within the stroke. 3. Do not scratch or gouge the sliding parts of the cylinder tube or pisn rod, etc., by striking or grasping them with other objects. Cylinder bores are manufactured precise lerances, so that even a slight deformation may cause malfunction. lso, scratches or gouges, etc., in the pisn rod may lead damaged seals and cause air leakage.. Prevent the seizure of rotating parts. Prevent the seizure of rotating parts (pins, etc.) by applying grease.. Do not use until you can verify that equipment can operate properly. Verify correct mounting by appropriate function and leakage inspections after compressed air and power are connected following mounting, maintenance or conversions. 6. Operating manual The product should be mounted and operated after thoroughly reading the manual and understanding its contents. Keep the operating manual where it can be referred as needed. 7. Preparation before piping Before piping is connected, it should be thoroughly blown out with air (flushing) or washed remove chips, cutting oil and other debris from inside the pipe. 8. Wrapping of pipe tape When screwing gether pipes and fittings, etc., be certain that chips from the pipe threads and sealing material do not get inside the piping. lso, when pipe tape is used, leave. 2 thread ridges exposed at the end of the threads. Expose approx. 2 threads Wrapping direction Pipe tape Caution Warning Warning Cushion. Readjust using the cushion needle. Cushion is adjusted at the facry, however, the cushion needle on the cover should be readjusted when the product is put in service, based upon facrs such as the size of the load and the operating speed. When the cushion needle is turned clockwise, the restriction becomes smaller and the cushion's effectiveness is increased. Tighten the lock nut securely after adjustment is performed. 2. Do not operate with the cushion needle in a fully closed condition. This will cause damage the seals.. Use clean air. Do not use compressed air which includes chemicals, synthetic oils containing organic solvents, salt or corrosive gases, etc., as it can cause damage or malfunction. Caution. Install air filters. Install air filters at the upstream side of valves. The filtration degree should be μm or finer. 2. Install an after-cooler, air dryer or water separar, etc. ir that includes excessive drainage may cause malfunction of valves and other pneumatic equipment. To prevent this, install an after-cooler, air dryer or water separar, etc. 3. Use the product within the specified range of fluid and ambient temperature. Take measures prevent freezing, since moisture in circuits can be frozen below C, and this may cause damage seals and lead malfunction. Maintenance. Removal of equipment, and supply/exhaust of compressed air. When equipment is removed, first check measures prevent dropping of driven objects and run-away of equipment, etc. Then, cut off the supply pressure and electric power, and exhaust all compressed air from the system. When machinery is restarted, proceed with caution after confirming measures prevent cylinder from lurching. Caution. Drain flushing Remove drainage from air filters regularly. (Refer the specifications.) 66

69 u Switches Be sure read this before handling. Warning. Confirm the specifications. Read the specifications carefully and use this product appropriately. The product may be damaged or malfunction if it is used outside the specification range for current load, voltage, temperature or impact. We do not guarantee against any damage if the product is used outside of the specification range. 2. Cautions for use in an interlock circuit When an au switch is used for an interlock signal requiring high reliability, devise a double interlock system avoid trouble by providing a mechanical protection function, or by also using another switch (sensor) gether with the au switch. lso, perform periodic maintenance and confirm proper operation. 3. Do not make any modifications (including exchanging the printed circuit boards) the product. It may cause human injuries and accidents. Caution. Pay attention the length of time that a switch is ON at an intermediate stroke position. When an au switch is placed at an intermediate position of the stroke and a load is driven at the time the pisn passes, the au switch will operate, but if the speed is o great the operating time will be shortened and the load may not operate properly. The maximum detectable pisn speed is: V (mm/s) = u switch operating range Time load applied (ms) In cases of high pisn speed, the use of an au switch (D-FNTL, F7NTL, GNTL, MNTL, MPTL) with a built-in OFF delay timer ( 0 ms) makes it possible extend the load operating time. The wide-range detection type D-GNBL (operating range 3 mm) may also be useful, depending on the application. Please consult with SMC for other models. 2. Keep wiring as short as possible. <Reed> s the length of the wiring a load gets longer, the rush current at switching ON becomes greater, and this may shorten the product s life. (The switch will stay ON all the time.) ) Use a contact protection box when the wire length is m or longer. 2) Even if an au switch has a built-in contact protection circuit, when the wiring is more than m long, it is not able adequately absorb the rush current and its life may be reduced. It is again necessary connect a contact protection box in order extend its life. Please consult with SMC in this case. Design / Selection x 00 Caution <Solid state> 3) lthough wire length should not affect switch function, use a wire 0 m or shorter. If the wiring is longer it will likely increase noise although the length is less than 0 m. When the wire length is long, we recommend the ferrite core is attached the both ends of the lead wire prevent excess noise. contact protection box is not necessary for solid state switches due the nature of this product construction. 3. Do not use a load that generates surge voltage. If a surge voltage is generated, the discharge occurs at the contact, possibly resulting in the shortening of product life. If driving a load such as a relay that generates a surge voltage, <Reed> Use an au switch with built-in contact protection circuit or use a contact protection box. <Solid state> Use a built-in surge absorbing element type device.. Take precautions when multiple cylinders/actuars are used close gether. When multiple au switch cylinders/actuars are used in close proximity, magnetic field interference may cause the au switches malfunction. Maintain a minimum cylinder separation of mm. (When the allowable interval is specified for each cylinder series, use the indicated value.) The au switches may malfunction due the interference from the magnetic fields. Use of a magnetic screen plate (MU-S0) or commercially available magnetic screen tape can reduce the interference of magnetic force.. Pay attention the internal voltage drop of the au switch. <Reed> ) u switch with an indicar light (Except D-6, 76, 6, 6V, C76, E76, Z76) If au switches are connected in series as shown below, take note that there will be a large voltage drop because of internal resistance in the light emitting diodes. (Refer the internal voltage drop in the au switch specifications.) [The voltage drop will be n times larger when n au switches are connected.] Even though an au switch operates normally, the load may not operate. Load In the same way, when operating under a specified voltage, although an au switch may operate normally, the load may not operate. Therefore, the formula below should be satisfied after confirming the minimum operating voltage of the load. Supply voltage Internal voltage drop of au switch > Minimum operating voltage of load CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order 67

70 u Switches 2 Be sure read this before handling. Caution Design / Selection 2) If the internal resistance of a light emitting diode causes a problem, select an au switch without an indicar light (D-6,,, 0, 0V, C, R, 0, E, Z). <Solid state/2-wire type> 3) Generally, the internal voltage drop will be greater with a 2- wire solid state au switch than with a reed au switch. Take the same precautions as in ). lso, take note that a VDC relay is not applicable. 6. Pay attention leakage current. <Solid state/2-wire type> Current (leakage current) flows the load operate the internal circuit when in the OFF state. Operating current of load (OFF condition) > Leakage current If the criteria given in the above formula are not met, it will not reset correctly (stays ON). Use a 3-wire au switch if this specification will not be satisfied. Moreover, leakage current flow the load will be n times larger when n au switches are connected in parallel. 7. Ensure sufficient clearance for maintenance activities. When designing an application, be certain allow sufficient clearance for maintenance. 8. When multiple au switches are required. n indicates the number of au switches which can be physically mounted on the cylinders/actuars. Detection intervals depends on the au switch mounting structure and set position, therefore some required interval and set positions may not be available.. Limitations of detectable positioning When using certain mounting brackets, the surface and position where an au switch can be mounted maybe restricted due physical interference. For example, when using some bracket types the au switch cannot be surface mounted at the botm side of foot bracket, etc. Select the set position of the au switch so that it does not interfere with the mounting bracket of the cylinders/actuars (such as trunnion or reinforcement ring).. Use the cylinder and au switch in proper combination. The au switch is pre-adjusted activate properly for an au-switch-capable SMC cylinder/actuar. If the au switch is mounted improperly, used for another brand of cylinders/actuars or used after the alternation of the machine installation, the au switch may not activate properly. Caution Mounting / djustment. Do not drop or bump. Do not drop, bump or apply excessive impacts (0 m/s 2 or more for reed au switches and 00 m/s 2 or more for solid state au switches) while handling. lthough the body of the au switch may not be damaged, the inside of the au switch could be damaged and cause malfunction. 2. Observe the proper tightening rque for mounting an au switch. When an au switch is tightened beyond the range of tightening rque, au switch mounting screws, au switch mounting brackets or au switch may be damaged. On the other hand, tightening below the range of tightening rque may allow the au switch slip out of position. 3. Do not carry a cylinder by the au switch lead wires. Never carry a cylinder by its lead wires. This may not only cause broken lead wires, but it may cause internal elements of the au switch be damaged by the stress.. Fix the au switch with appropriate screw installed on the switch body. If using other screws, au switch may be damaged.. Mount an au switch at the centre of the operating range. In the case of 2-colour display au switch, mount it at the centre of the green LED illuminating range. djust the mounting position of the au switch so that the pisn sps at the centre of the operating range. (The mounting position shown in the catalogue indicates the optimum position at stroke end.) If mounted at the end of the operating range (around the borderline of ON and OFF), operation will be unstable depending on the operating environment. lso there are some cylinders or actuars with individual setting methods for au switches. If so, mount it in accordance with the indicated method. Even if 2-colour indication solid state au switches are fixed at a proper operating range (the green light lights up), the operation may become unstable depending on the installation environment or magnetic field disturbance. (Magnetic body, external magnetic field, proximal installation of cylinders with built-in magnet and actuars, temperature change, other facrs for magnetic force fluctuation during operation, etc.) 68

71 u Switches 3 Be sure read this before handling. Caution. Confirm proper insulation of wiring. Be certain that there is no faulty wiring insulation (contact with other circuits, ground fault, improper insulation between terminals, etc.). Damage may occur due excess current flow in a switch. 2. Do not wire with power lines or high voltage lines. Wire separately from power lines or high voltage lines, avoiding parallel wiring or wiring in the same conduit with these lines. Control circuits containing au switches may malfunction due noise from these other lines. 3. void repeatedly bending or stretching lead wires. Broken lead wires will result from repeatedly applying bending stress or stretching force the lead wires. Stress and tensile force applied the connection between the lead wire and au switch increases the possibility of disconnection. Keep the lead wire from moving especially in the area where it connects with the au switch.. Be certain connect the load before power is applied. <2-wire type> If the power is turned ON when an au switch is not connected a load, the au switch will be instantly damaged because of excess current (short circuit). It is the same as when the 2-wire brown lead wire (+, output) is directly connected the (+) power supply terminal.. Do not allow short-circuit of loads. <Reed> If the power is turned ON with a load in a short circuited condition, the au switch will be instantly damaged because of excess current flow in the switch. <Solid state> ll models of D-J, GNB and PNP output type au switches do not have built-in short circuit protection circuits. If a load is short circuited, the au switch will be instantly damaged as in the case of reed au switches. Take special care avoid reverse wiring with the brown power supply line and the black output line on 3-wire type au switches. Wiring 6. void incorrect wiring. <Reed> 2 VDC au switch with indicar light has polarity. The brown lead wire or terminal No. is (+), and the blue lead wire or terminal No. 2 is ( ). [For D-7, (+) is on the no-displayed side, ( ) is on the black line side.] ) If connections are reversed, an au switch will operate, however, the light emitting diode will not light up. lso, take note that a current greater than that specified will damage a light emitting diode and it will no longer operate. pplicable model: D-73, 73, 73C, C73, C73C, E73, Z73 D-R73, R73C, 7, 3, 3, 3V D-33, 3, 33, 3,, D-3,, B3, B 2) When using a 2-colour indicar type au switch (D-7W, W and BW), the au switch will constantly remain ON if the connections are reversed. <Solid state> ) If connections are reversed on a 2-wire type au switch, the au switch will not be damaged if protected by a protection circuit, but the au switch will always stay in an ON state. owever, it is still necessary avoid reversed connections, since the au switch could be damaged by a load short circuit in this condition. 2) If connections are reversed (power supply line + and power supply line ) on a 3-wire type au switch, the au switch will be protected by a protection circuit. owever, if the power supply line (+) is connected the blue wire and the power supply line ( ) is connected the black wire, the au switch will be damaged. 7. When the lead wire sheath is stripped, confirm the stripping direction. The insular may be split or damaged depending on the direction. (D-M only) Recommended Tool Description Wire stripper Model D-MN-SWY Stripper for a round cable (ø2.0) can be used for a 2-wire type cable. CP6 CP6K -CP6 -C6 C6Y C6K C6 u Switch Simple Specials Made Order 6