Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm
|
|
|
- Rachel Caldwell
- 5 years ago
- Views:
Transcription
1 ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot J K R H ylon tarpaulin Heat resistant tarpaulin o cushion With cushion on rod side With cushion on rod side With both sides cushion (ir-hydyo style: o cushion) Cushion ymbol F Tube material size Tube material ø to ø luminum tube ø to ø teel tube ø to ø teel tube H size, mm mm mm mm mm mm mm * If specifying more than one symbol, please indicate them in alphabetical order. ** The air-hydro style has no cushion. In case of this style, no symbol indicates no cushion. Cylinder stroke (Refer to p..-3 for max. stroke table.) mm mm mm Mounting Bracket Part o. size Foot * Flange ingle clevis Double clevis ** C-L C-F C-C C-D C-L4 C-F4 C-C4 C-D4 C-L6 C-F6 C-C6 C-D6 C-L C-F C-C C-D C-L C-F C-C C-D C-L5 C-F5 C-C5 C-D5 * Order foot brackets for one cylinder. ** When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. C-L3 C-F3 C-C3 C-D3 Refer to p..-7 for How to Order uto witches..-
2 ir Cylinder/tandard eries C pecifications Fluid Proof pressure Max. operating pressure Min. operating pressure Piston speed Cushion mbient and fluid temperature Thread tolerance troke length tolerance Mounting ccessories Mounting Foot, ir.5mpa to mm/s With Front flange Rear flange.57mpa.97mpa ingle clevis Turbine oil.6mpa.5to mm/s Without to 7 C (o freezing), : 5 to C JI class or less:, 5 to,:,, to,: to :, to :, Foot, Front flange, Rear flange, ingle clevis, Double clevis, Center trunnion Double clevis Center trunnion Clevis pin, tandard Cotter pin Rod end nut ingle knuckle joint ccessory Double knuckle joint (Knuckle pin, Cotter pin) Rod boot * Refer to p..-9 in case of using rod end nut together with double knuckle joint. CJ CJP CJ CM C5 CG MB C95 C C Order Made Made to Order Refer to p.5.4- for made to order specifications for series C. Max. troke Tube material luminum alloy Carbon steel tube Mounting bracket Rear flange ingle clevis Double clevis Center trunnion or less or less or less Foot Front flange or less or less or less Rear flange ingle clevis Double clevis or less or less or less or less or less or less or less Foot Front flange or less or less or less or less or less or less or less econd Class Pressure Vessel In case of exceeding the following strokes, the cylinder is in the scope of the second class pressure vessel. size troke, Rod Boot Materials ymbol Material Max. ambient temp. J ylon tarpaulin C K Heat resistant tarpaulin C * * Max. ambient temperature for the rod boot itself..-3
3 eries C Major Material and urface Treatments Tube liding seals Piston Description Cover ø, ø, ø ø, ø, ø, ø Piston rod Material ote plate Black coated luminum alloy Hard anodized Carbon steel tube Inside: Hard chrome plated Carbon steel tube Inside: Hard chrome plated JI B O ring PY, LP KY, RP Carbon steel Hard chrome plated Cast iron luminum alloy cast Chromated (In case of aluminum alloy cast iron) (teel tubing: Cast iron) luminum alloy cast Chromated (In case of aluminum alloy cast iron) (teel tubing: Cast iron) Weight/luminum tube: style ( style, style) weight size Foot Front flange Rear flange ingle clevis Double clevis (Clevis pin, Cotter pin) Trunnion ø ø ø 4.5 (3.73) 6.4 (5.) 7.53 (6.4) 7.53 (6.4) 7.9 (6.).3 (7.6).9 (7.6) 7.9 (6.57). (9.9).9 (.57).9 (.57).7 (.6) 3. (.6) 3.7 (.3) 4.77 (3.3) 7.57 (5.3) 3.6 (9.4) 3.6 (9.4) 3.6 (.5) 3. (9.37) 3.7 (3.) (kg) Precautions Be sure to read before handling. Refer to p.- to - for afety Instrnctions and common precautions. Warning Do not use the cylinder as a shock absorber. Using the cylinder as a shock absorber may cause damage. Caution Do not open the cushion valve excessively. If the cushion valve is rotated excessively in the opening direction could be damaged because the portion of the threads that is engaged (counterclockwise), be aware that the valve could slip out, or the threads becomes too short. Regarding the installation of a knuckle joint: Contact MC if a knuckle joint must be installed on the piston rod by using the rod end nut. dditional weight per stroke ingle knuckle joint.9.6. ccessories Double knuckle joint (Clevis pin, Cotter pin) Rod end nut * ( ) shows the weight of non-lube and air-hydro style. Calculation example: CL- weight 7.57 (Foot style, ø) dditional weight./ stroke Cylinder stroke stroke X / =.5kg Weight/teel tubing (kg) size ø ø ø ø ø ø ø Foot Front flange tandard weight Rear flange ingle clevis Double clevis (Clevis pin, Cotter pin) Trunnion dditional weight per stroke ingle knuckle joint ccessory Double knuckle joint (Clevis pin, Cotter pin) Trunnion
4 ir Cylinder/tandard eries C Construction CJ CJP CJ CM C5 CG MB C95 C C Component Parts o. Description Material ote q Rod cover plate Balck coated w Head cover plate Black coated Cylinder ø to ø luminum alloy Hard anodized e tube ø to ø Carbon steel pipe Inside: Hard chrome plated r Piston Cast iron t Piston rod Carbon steel Hard chrome plated y Holder plate Cast iron Black coating u Bushing Lead bronze casting i Valve guide Brass o Tie rod Carbon steel Chromated! Tie rod nut Black zinc chromated! pring washer teel wire Black zinc chromated! Holder plate bolt Chrome-molybdenum steel Black zinc chromated!3 pring washer teel wire Black zinc chromated!4 Cushion ring Zinc chromated!5 Cushion ring B Zinc chromated!6 Cushion valve Electroless nickel plated!7 pacer Zinc chromated! pacer B Zinc chromated!9 ir releasing valve B Zinc ir releasing valve Chrome-molybdenum Check ball Chrome bearing Tie rod reinforcement ring Black coated # Wear ring Resin In case of long strokes luminum tube material of non-lube and air-hydro style is an aluminum alloy die cast. eal List o. Description Mat'l Wiper Cushion seal DR- DM- DR- Rod seal P P P P P Piston seal P P3 P P P5 P Valve Tube gasket C C C C C95 C-6-G4 Piston seal G5 G5 G5 G G G G # Holder gasket G G G G # Guide gasket style eals are the same as for the Rod seal PY- PY- PY- PY- PY- PY- Piston seal LP- LP- LP- LP- LP- LP- LP- style eals are the same as for the lube-style. (Except cushion Rod seal KY- KY- Piston seal RP- RP- RP- Replacement Parts (eal kits) DR- DM- Part o. DR- DM- DR- DM- DR- DM- DR-7 PC-5(R) DM-(H) Refer to p..-6 for replacement part no. for air cylinder standard style series C. eal kits does not include cushion seal, piston seal and guide gasket because they are not replacement parts..-5
5 eries C tandard /Replacement Parts (eal kits) When ordering the replacement parts (seal kits) for standard style eries C air cylinders, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). tandard style () Kit o. C--P C--P C--P C--P C--P C--P C--P 3 Wiper ring DR- DR- DR- DR- DR- DR- DR-7 5 Rod seal P P P P P P 6 Piston seal P P3 P P P5 P P5 7 Valve seal Tube gasket C C C C C95 C-6-G4 C-6-G5 3 Holder gasket G G G G tandard () Kit o. C-P C-P C-P C-P C-P C-P C-P 3 Wiper ring DR- DR- DR- DR- DR- DR- DR-7 5 Rod seal PY- PY- PY- PY- PY- PY- PY-7 6 Piston seal LP- LP- LP- LP- LP- LP- LP- 7 Valve seal Tube gasket C C C C C95 C-6-G4 C-6-G5 3 Holder gasket G G G G Kit o. CH-P CH-P CH-P Wiper ring DR- DR- DR- Rod seal KY- KY- KY- Piston seal RP- RP- RP- Valve seal Tube gasket C C C Holder gasket.-6
6 ir Cylinder/With uto witch eries CD ø, ø, ø, ø, ø B L F G C D T ir cylinder with auto switch Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion CD L H, mm mm mm mm mm size mm mm mm How to Order Cylinder stroke (Refer to p..- for Max./Min. stroke table.) JR 53 Rod boot/cushion Rod boot Cushion umber of auto switches 3 n 3 n uto switch Without auto switch *elect the applicable auto switch from the table below. J K R H ylon tarpaulin Heat resistant tarpaulin o cushion With cushion on rod side With cushion on head side With both sides cushion ( style: o cushion) * If specifying more than one symbol, please indicate them in alphabetical order. ** The air-hydro style has no cushion. o symbol indicates no cushion. CJ CJP CJ CM C5 CG MB C95 C C pplicable uto witches/refer to p.5.3- for further information on auto switch. Reed switch olid state switch pecial function Diagnostic indicator ( color) Diagnostic indicator ( color) Electrical entry Terminal conduit DI Terminal Terminal conduit Water resistant ( color) With timer With diagnostic output ( color) Indicator Yes Yes o Yes Latch with diagnostic output ( color).5m (Example) 3m L 5m Z Wiring (Output) 3 wire (Equiv. to P) wire wire wire wire 4V Load voltage DC 3 wire (P) 4V 5V, V 3 wire (PP) 3 wire (P) 3 wire (P) 3 wire (PP) 3 wire (P) 4 wire (P) 4V 5V V V 5V, V V V V 5V, V V 5V, V V 5V, V C 53 V, V ²V 64 V, V V, V uto switch model Tie rod W F F5P J5 J FW F5PW JW F5BL F5TL FF Band ( ) Lead wire 3 (L) 5 (Z) one pplicable load IC IC IC IC IC IC PLC Relay, PLC PLC Relay, PLC * Lead wire length 53 * olid state switch marked "" is manufactured upon receipt of order. 53L 53Z F5LF G K PLC Relay PLC Relay PLC Part o. of Cylinder with Built-in Magnet In case of magnet built-in style without auto switch, there is no symbol used. (Example) CDB-.-7
7 eries CD pecifications Fluid size Proof pressure Max. operating pressure Min. operating pressure Piston speed Cushion mbient and fluid temperature Thread tolerance troke length tolerance Mounting, ir ø, ø, ø ø, ø.57mpa.mpa.97mpa.7mpa.5mpa to mm/s With Turbine oil ø, ø, ø.57mpa.97mpa.6mpa.5 to mm/s Without to C (o freezing), style: 5 to C JI class or less:, 5 to,:, to,:, Foot, Front flange, Rear flange, ingle clevis, Double clevis, Center trunnion Max. troke size ø, ø ø ø ø ote, Rear flange, ingle clevis, Double clevis, Center trunnion or less or less or less 99 or less Max. stroke ø: Cylinders of the stroke range of 99 to are special products. Foot, Front flange or less or less or less 99 or less ø: Cylinders of the stroke range of 99 to are special products. Min. trokes for uto witch Mounting uto switch style D-5, 6 D-W D-F5, J5 o. of auto switches (Different side, ame side),. n (ame side) Mounting bracket except center trunnion ø 5 (n ) 5+ n=, 4, 6, (n 4) + n=4,,, 6 ø Center trunnion ø (n 4) + n=4,,, 6 n: umber of pieces ø ø (n 4) + n=4,,,6 Precautions Be sure to read before handling. Refer to p.-44 to -46 for common precautions of auto switch. Dimensions of auto switches style Refer to p..- to.- for dimensions of auto switch style (according to mounting bracket). D-F5W, JW D-F5B D-5F D-F5T D-3 D-G D-K D-44 (Different side, same side),. n (ame side) n n Different side ame side Different +3(n ) side ame +(n ) side 5 Different side ame side Different side ame side (n ) + n=, 4, 6, +3(n ) +(n ) 5 Mounting Bracket Part o. size Foot * Flange ingle clevis Double clevis ** C-L C-F C-C C-D C-L4 C-F4 C-C4 C-D4 7 (n 4) + n=4,,, 6 (n 4) + n=4,,, 6 +3(n )n=, 4, 6, +(n )n=, 4, 6, +3(n )n=, 4, 6, +(n )n=, 4, 6, C-L6 C-F6 C-C6 C-D6 C-L C-F C-C C-D * Order foot brackets for one cylinder. ** When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. (n 4) 7+ n=4,,, 6 + (n ) n=, 4, 6, +3 (n ) n=, 4, 6, +3 (n ) n=, 4, 6, + (n ) n=, 4, 6, C-L C-F C-C C-D.-
8 ir Cylinder/With uto witch eries CD uto witch Mounting Bracket Part o. Major Materials and urface Treatments Tube liding seals uto switch D-5/6/W/F5/J5/F5TL D-F5W/JW/F5B/FF Description Cover ø, ø, ø ø, ø Piston rod Piston BT- D-3/44/G/K B- B- B- B- B- * tainless mounting screw set set of following stainless steel mounting screws is attached. ( switch mounting band is not attached. Please order the band separately.) BB: D-5/6/F5/J5 "D-F5BL" switch is set on the cylinder with the screws above when shipped. When a switch only is shipped, "BB" screw is attached. Material size BT- luminum alloy Carbon steel luminum alloy cast BT-6 BT- ote Black coated Hard anodized * Foot, Front flange: In case of bore size of ø and ø, the stoke range is to. In case of ø, piston seals of the stroke range to are LP. * In case of bore size ø and ø, piston seals are LP. BT- JI B O ring * PY, LP KY, RP Hard chrome plated Chromated CJ CJP CJ CM C5 CG MB C95 C C Weight (kg) weight size dditional weight per stroke ccessory Foot Front flange Rear flange ingle clevis Double clevis (Clevis pin, Cotter pin) Trunnion ingle knuckle joint Double knuckle joint (Knuckle pin, Cotter pin) Rod end nut ø ø ø ø ø uto witch Weight (kg) Reed switch olid state switch Model D-5/6 D-W D-3 D-4 D-F5/J5 D-G/K Lead wire length.5m 3m.5m 3m witch witch + witch mounting bracket ø ø ø ø ø
9 eries CD uto witch pecifications Refer to p.5.3- for the details on auto switches. pplicable uto witch uto switch model Electrical entry Function Page Reed switch D-3 D-44 D-5/6 D-W Band mounting Tie rod mounting Terminal conduit DI terminal color indication olid state switch D-G/K D-F5/J5 D-F5T D-F5W/JW D-F5B D-F5F Band mounting Tie rod mounting Terminal conduit With timer color indication color Water resistant color With diagnostic output With uto witch/replacement Parts (eal kits) When ordering the replacement parts (seal kits) for eries CD cylinder with auto switches, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). style C--P C--P C--P CD--P CD--P Kit o. Wiper ring Rod seal Piston seal Valve seal Tube gasket C-P C-P C-P C-P C-P CDL-P CDL-P CDL-P DR- DR- DR- DR- DR- DR- DR- DR- DR- DR- DR- DR- DR- P P P P P PY- PY- PY- PY- PY- P P P P P3 P LP- LP- LP- LP- LP- LP- LP- LP- LP- LP- C C C C C95 Kit o. Wiper ring Rod seal Piston seal Valve seal Tube gasket C C C C C95 Kit o. Wiper ring Rod seal Piston seal Valve seal Tube gasket C C C Holder plate gasket G G Holder plate gasket G G Holder plate gasket Foot, Front flange: ø, ø to stroke ø to stroke Kit o. Wiper ring Rod seal Piston seal Valve seal Tube gasket CH-P CH-P CH-P DR- DR- DR- KY- KY- KY- RP- RP- RP- C C C Holder plate gasket.-
10 ir Cylinder/With uto witch eries CD Construction /ø, ø, ø CJ CJP CJ CM C5 CG MB C95 C C Component Parts o. q w e r t y u Description Rod cover Head cover Cylinder tube Piston Piston rod Holder plate Bush Valve guide Tie rod Tie rod nut pring washer Holder plate bolt pring washer Cushion ring Cushion ring B Cushion valve pacer pacer B ir releasing valve B ir releasing valve Check ball uto switch et screw witch mounting bracket witch mounting screw Magnet Wear ring Material luminum alloy luminum alloy cast iron Carbon steel Cast iron Lead bronze casting Brass Carbon steel teel wire Chrome-molybdenum steel teel wire Chrome-molybdenum steel Chrome bearing steel Chrome-molybdenum steel luminum alloy Copper wire Resin ote Black coated Black coated Hard anodized Chromate Hard chrome plated Black coated Chromated Black zinc chromated Black zinc chromated Black zinc chromated Black zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Zinc chromated Zinc chromated Zinc chromated Zinc chromated ickel plated eal List o. Description Material (Refer to p..- for Wiper ring DR- Cushion seal DM- DM- # Rod seal P P # Piston seal P P3 # Valve seal #3 Tube gasket C C #4 Piston gasket G5 G5 #5 Holder plate gasket #6 Guide gasket C-7 C-7 Part o. DR- DM- P P C G5 C-7 eals except # and # are the same as lube style. # Rod seal PY- PY- PY- # Piston seal LP- LP- LP- eals except # and # are the same as lube style. # Rod seal KY- KY- KY- # Piston seal RP- RP- RP- DR- DM- P LP- C G G C-7 PY- LP- DR- DM- P LP- C95 G G C-7 PY- LP- Replacement Parts (eal kits) Refer to p..- for replacement part o. (seal kits) of cylinder with auto switch series CD. eal kits does not include cushion seal, piston seal and guide gasket because they are not replacement parts..-
11 eries C /CB (CB), (CB), (CBH) With auto switch/cdb troke range L B C D E E to 4 6 M4 X M3 X.5 / 9 to M4 X M3 X.5 / 9 to M6 X M X.5 3 /4 6 to M X.5 4 M X.5 3 /4 to M X.5 46 M X.5 3 /4 to M4 X M X 4 to M3 X M64 X 46 With auto switch/ø to ø only W/o rod boot W/ rod boot troke range W/o rod boot W/ rod boot H ZZ e f h l ZZ ZZ ZZ 33 5 to to to to to troke.5 Other dimensions are the same as standard style. Refer to p..- for dimensions of auto switch setting position troke 37.5 and mounting height. In case of rod boot style, min. stroke is 3mm or more. Refer to p.- for auto switch min. mountable stroke. CB C, # The drawing shows with an auto switch. Eliminate the unnecessary parts. CB C, # CB C, # CB C, # CB C, # CB C, # CB C, # F F G J K K M MM P.-
12 ir Cylinder eries C Foot/CL (CL), (CL), (CLH) Long stroke With auto switch/cdl CJ CJP CJ CM C5 CG MB C95 C C troke range * Long stroke range L B C D E E F to to to to to to to to to to to to to to M4 X.5 M4 X.5 M6 X.5 M X.5 M X.5 M4 X.5 M3 X M3 X.5 M3 X.5 M X.5 M X.5 M X.5 M X M64 X / / /4 /4 /4 With auto switch/ø to ø only W/o rod boot W/ rod boot troke range W/o rod boot W/ rod boot RY X Y L H ZZ e f h l ZZ ZZ ZZ to to to to to troke 7 * Other dimensions are the same as standard style. ** Refer to p..- for dimensions of auto switch setting troke 466 position and mounting height. * In case of rod boot style, min. stroke is 3 mm or more. *** Refer to p..- for auto switch min. mountable stroke. CL C, # CL C, # CL C, # CL C, # CL C, # CL C, # * The drawing shows with an auto switch. Eliminate the unnecessary parts. CL C, # F G J K K LD LH L LT LX LY MM P RT.-3
13 eries C Front Flange/CF (CF), (CF), Ir-hydro (CFH) Long stroke With auto switch/cdf troke W/o rod boot With rod boot range L B B C D E E F F FD FT FX FY FZ G J K K M P MM * H ZZ e f h l ZZ to M4 X / M3 X to M4 X / M3 X X to M6 X / 4 M X troke to M X / 4 M X to M X / 4 M X to to M4 X M3 X M X 3 5 M64 X X troke 34 Long stroke With auto switch/ø to ø only Long stroke W/o rod boot W/ rod boot troke range W/o rod boot W/ rod boot M M range RT RY ZZ ZZ ZZ ZZ to to to to to to to to to to to * Other dimensions are the same as standard style. to 3 ** Refer to p..- for dimensions of auto switch setting 7 37 position and mounting height. * In case of rod boot style, min. stroke is 3mm or more. *** Refer to p..- for auto switch min. mountable stroke. CF C, #3 CF C, #3 CF C, #3 CF C, #3 CF C, #3 CF C, #3 * The drawing shows with an auto switch. Eliminate the unnecessary parts. CF C, #3.-4
14 ir Cylinder eries C Rear Flange/CG (CG), (CG), (CGH) With auto switch/cdg CJ CJP CJ CM C5 CG MB C95 C C troke range * to to to to to to to 7 L B 5 33 B C D 7 E W/o rod boot W/ rod boot H ZZ e f h l ZZ troke.7 troke 3 6 * In case of rod boot style, min. stroke is 3mm or more. CG C, #4 CG C, #4 CG C, #4 CG C, #4 CG C, #4 CG C, #4 CG C, #4 * The drawing shows with an auto switch. Eliminate the unnecessary parts. E F F FD FT FX FY M4 X M4 X M6 X M X M X M4 X M3 X.5 3 With auto switch/ø to ø only troke range W/o rod boot W/ rod boot ZZ ZZ to 9 to 9 5 to to 93 to 99 9 * Other dimensions are the same as standard style. ** Refer to p..- for dimensions of auto switch setting position and mounting height. *** Refer to p..- for auto switch min. mountable stroke. FZ G J K K MM M3 X.5 M3 X.5 M X.5 M X.5 M X.5 M X M64 X P / / 3 / 4 3 / 4 3 / 4.-5
15 eries C ingle Clevis/CC (CC), (CC), (CCH) With auto switch/cdc troke range * to to to to to to to 7 L B C CDH CT W/o rod boot W/rod boot U H Z ZZ e f h l Z ZZ troke.7 troke * In case of rod boot style, min. stroke is 3mm or more CX D 7 E E F F G J K K M4 X.5 M4 X.5 M6 X.5 M X.5 M X.5 M4 X.5 M3 X M3 X.5 M3 X.5 M X.5 M X.5 M X.5 M X M64 X / / 3 / 4 3 / 4 3 / With auto switch/ø to ø only troke range W/o rod boot W/ rod boot Z ZZ Z ZZ to to to to 3 34 to * Other dimensions are the same as standard style. ** Refer to p..- for dimensions of auto switch setting position and mounting height. *** Refer to p..- for auto switch min. mountable stroke. L MM P RR CC C, #5 CC C, #5 CC C, #5 CC C, #5 CC C, #5 CC C, #5 CC C, #5 * The drawing shows with an auto switch. Eliminate the unnecessary parts..-6
16 ir Cylinder eries C Double Clevis/CD (CD), (CD), (CDH) With auto switch/cdd CJ CJP CJ CM C5 CG MB C95 C C troke range * L B C CDH to to to to to to to W/o rod boot W/rod boot U H Z ZZ e f h l Z ZZ troke.7 troke * In case of rod boot style, min. stroke is 3mm or more. CT CX CZ D 7 E E F F G J K K L MM RR M4 X.5 M4 X M3 X.5 M3 X.5 / / M6 X.5.5 M X.5.5 M X M X.5 M X.5 M X.5 3 / 4 3 / 4 3 / M4 X.5 M3 X M X 3 M64 X 6 With auto switch/ø to ø only troke range W/o rod boot W/ rod boot Z ZZ Z ZZ to to to to 3 34 to * Other dimensions are the same as standard style. ** Refer to p..- for dimensions of auto switch setting position and mounting height. *** Refer to p..- for auto switch min. mountable stroke. P CD C, #6 CD C, #6 CD C, #6 CD C, #6 CD C, #6 CD C, #6 CD C, #6 * The drawing shows with an auto switch. Eliminate the unnecessary parts..-7
17 eries C Center Trunnion/CT (CT), (CT), (CTH) With auto switch/cdt troke range * 5 to 3 to to 3 to 3 to 3 to to 7 L B C D 7 E E W/o rod boot W/rod boot TY TZ H Z ZZ e f h l Z ZZ troke.7 troke * In case of rod boot style, min. stroke is 3mm or more. (In case of rod boot style of bore size ø and ø, min. stroke is mm or more.) F 4 4 F G J 6 M4 X.5 6 M4 X.5.5 M6 X.5.5 M X.5.5 M X.5 3 M4 X.5 3 M3 X.5 K K M MM M3 X.5 M3 X.5 M X.5 M X.5 M X.5 M X M64 X P / / 3 / 4 3 / 4 3 / 4 R TDe TT TX 7 3 With auto switch/ø to ø only troke range W/o rod boot W/ rod boot Z ZZ Z ZZ to 9 7 to 9 7 to to to * Other dimensions are the same as standard style. ** Refer to p..- for dimensions of auto switch setting position and mounting height. *** Refer to p..- for auto switch min. mountable stroke. CT C, #7 CT C, #7 CT C, #7 CT C, #7 CT C, #7 CT C, #7 CT C, #7 * The drawing shows with an auto switch. Eliminate the unnecessary parts..-
18 ir Cylinder eries C ccessory Dimensions ccessories I type single knuckle joint Knuckle pin, Clevis pin Part o. I- I-4 I-6 I- I- I-5 I-3 Y type double knuckle joint E L 5 MM M3 X.5 M3 X.5 M X.5 M X.5 M X.5 M X M64 X DH Material: Cast iron X RR U Part o. IY- IY-4 IY-6 IY- / IY-5 IY-3 Dd Rod end nut L l Material: Carbon steel d m (Drill Cotter through) pin ø4 X ø4 X ø4 X ø4 X ø5 X ø5 X CJ CJP CJ CM C5 CG MB C95 Material: Cast iron Part o. E L MM DH X Z Y- Y-4 Y-6 Y- Y- Y-5 Y M3 X.5 M3 X.5 M X.5 M X.5 M X.5 M X M64 X Use a single knuckle joint or a double knuckle joint individually. (crew it entirely over the rod end threads and tighten it.) To use a single knuckle joint or a double knuckle joint concurrently with a rod end nut, extend dimensions /H. (To extend dimensions /H, refer to the table below, and specify the product as Order Made -XO.) RR U Part o. T- T-6 T- T- T-5 T-3 / d M3 X.5 M X.5 M X.5 M X.5 M X M64 X H Material: B C D C C ingle/double knuckle joint mounting, H dimensions at using both single/ double knuckle joint and rod end nut ymbol / H 7 α L 5 H pplicable knuckle joint part o. I type single knuckle Y type double knuckle I- Y- I-4 Y-4 I-6 Y-6 I-, I- Y-, Y- I-5 Y-5 I-3 Y H 95 ccessory C size #9.-9
19 eries CD uto witch Mounting Position and Mounting Height uto witch Mounting Position uto witch Mounting Height uto switch model ø ø ø ø ø D-5 D-6 D-3 D-44 D-G D-K B D-W 7.5 B 5.5 D-F5 D-J B D-F5W D-JW D-F5BL D-F5F B D-F5TL B D-3 D-G D-K Hs D-44 Hs D-5 D-6 D-W Hs Ht D-F5 D-J5 D-F5W D-JW D-F5BL D-F5F D-F5TL Hs Ht
Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size
Air Cylinder: tandard eries CG1W,,,,,,, 0 How to Order auto switch auto switch CG1W L N 0 With auto switch CDG1W L N 0 HW N A uilt-in magnet Double acting, double rod type L U Mounting style asic style
Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
Series MBB ø32, ø40, ø50, ø63, ø80, ø100
Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis
How to Order. Standard stroke (mm) ø10 15, 30, 45, 60
ingle Acting, ingle Rod, pring Return/Extend eries K ø, ø pring extend pring return B L D Without auto switch With auto switch mm mm Basic Axial foot Rod side flange Double clevis K L CDJ2K L How to Order
Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection
ir Cylinder eries ø, ø, ø Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. eries Variations tandard
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page.
ir Cylinder: With End ock Series C ø, ø, ø, ø, ø Without auto switch With auto switch F G C D T With auto switch Mounting style asic style xial foot style Rod side flange style Head side flange style Single
10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125
ir Cylinder M Series ø3, ø40, ø50, ø63, ø80, ø00, ø5 RoHS 0% lighter CJ (ø40-00 stroke) Weight M Series 0.9 kg CJP CJ JCM CM Current model CM3 CG.0 kg CG3 JM Reduced weight by changing the shape of the
Elliptical design for space-savings
Plate Cylinder Series,,,, By adopting an elliptical piston design, a slim, square shaped body has been achieved, resulting in a space-saving cylinder with unrestricted mounting directions. Elliptical design
Round Type Hydraulic Cylinder
Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L
Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil.
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 4-4 www.cmafh.com With auto switch F G C D U CM CDM With auto switch (uilt-in magnet) Mounting style asic style
Round Type Hydraulic Cylinder
Round Type ydraulic Cylinder CM Series CQ CK C CM CS C C D- CM Series ominal pressure: 3. MPa ore size :,,, 3 3. MPa Round Type ydraulic Cylinder CM Series ø, ø, ø, ø pplicable uto Switches/Refer to pages
Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries /, 12,,,,,,, 3,, eries Variations eries eries Action Built-in magnet With air cushion tandard variations Built-in One-touch fitting With auto switch With strong scraper Page CX ouble acting -- CY
Series C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125
M..3 : PM Page i CT.ES-8 F ir Cylinder ø newly introduced Series M ø,ø,ø,ø,ø,ø,ø Series M, MW, MK, Double acting single rod Double acting double rod Double acting non-rotating rod ø newly introduced (Double
10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.
ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 10 % lighter RoS (ø 40-100 stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type. 0.91 kg Reduced weight by changing the shape
Dual Rod Cylinder: Double Rod Type. How to Order. Load voltage Auto switch model Perpendicular In-line 3-wire (NPN equivalent) Y7NWV Y7NW 5 V, 12 V
Dual Rod Cylinder: Double Rod Type eries CXW ø, ø, ø, ø, ø2, ø32 CX W L How to Order 0 Y7W M L Double rod type earing type lide bearing all bushing bearing ore size/troke ore size,,,,,,,,,,,,,,, 2, 32,
Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.
Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series
Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection
ir Cylinder Series CJ2 ø, ø, ø CJ1 CJP Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. Series
Free Mount Cylinder. Series CU. A space saving air cylinder with multiple surfaces for mounting. The series consist of an array of cylinders.
Mounting Axial mounting (Body tapped) Free Mount Cylinder eries CU Double Acting ingle Rod/Double Rod ingle Acting pring Return/Extend, Non-rotating Rod ø, ø, ø1, ø, ø, ø A space saving air cylinder with
/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting
roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state
Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder
Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. Velocity curve RE RE Speed Time Sine cylinder Conventional cylinder 3 Sine Cylinder Series,,, llows rapid
CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.
eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-
1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.
Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.
Series AXS. Standard Type/Single Acting:Spring Return, Spring Extended. Bore Size(mm) : ф20, ф25, ф32, ф40. How to Order A - 68
tandard ype/ingle Acting:pring Return, pring Extended (mm) : ф2, ф25, ф32, ф4 AILE EEL BODY HIH CYCLE LIFE LOW BREAKAWAY UMEROU MOUI OPIO MAE ADARD FOR AUO WICH BUMPER ADARD DEIED FOR O-LUBRICAED ERVICE
Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
ISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.
ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side
Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
Series CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy
Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.
Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common
Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.
Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series
Air Cylinder Series CG1
ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison
Large bore size cylinder SCS2 Series
Large bore size cylinder C2 eries ew product LGE BOE IZE CYLIDE C2 EIE Large Mass eduction! 50% mass reduction by using aluminum for covers and tubes CC-1118 2 oh compliant Large Mass 50% mass reduction
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
ISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,
Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.
Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 M G M M A S S Series
Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V
Compact Cylinder: Standard Type Double cting, Single Rod,,,,,,,,, How to Order Without auto switch D With auto switch CDQ2 D JW S uilt-in magnet Mounting style Through-hole (Standard) oth ends tapped style
15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to
Air ylinder A Series ø40, ø50, ø63, ø80, ø100 RoHS Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to (ø50-50 stroke) 15% lighter 1.31kg Easy air cushion control
Magnetically Coupled Rodless Cylinder Slider Type: Ball Bushing Bearing. How to Order CY1L 25 H 300 J79W. Load voltage 5 V 200V 100 V 12 V 5 V, 12 V
Magnetically Coupled Rodless Cylinder Slider Type: all ushing earing Series CY1L ø, ø, ø, ø, ø, ø, ø How to Order CY1L H 00 J79W Slider type (all bushing bearing) mm mm mm mm mm mm mm Magnetic holding
Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
16% lighter Existing model
ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter Existing model New Series.0 kg.69 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set
Sine Cylinder. REC Series. ø20, ø25, ø32, ø40. Allows high speed transfer of work with dramatically reduced shock/impact. REA REB REC Smooth
Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. RE RE RC Velocity curve Time Sine cylinder Current cylinder Sine Cylinder Series,,, llows rapid transfer
Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected.
ir Cylinder Series ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS emale rod end available as standard Rod end types suitable for the application can be selected. emale thread Easy fine adjustment of auto
Series MGC ø20, ø25, ø32, ø40, ø50
Compact Guide Cylinder Series MGC ø, ø, ø, ø, ø Linear Transfer Unit with compact guide body and front plate Grease nipple offers easy lubrication for bearings Compact front plate and guide body Space
Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube
Air ylinder S Series,,,,,, J Series Variations Series Action asic Standard variations Page JP J JM Standard S Series S Series Double acting Single rod S series Double rod SW series 5 548 M M3 G G3 JM M
1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1
1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high
Air Cylinder Series CG1
ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison
Series RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly
Small Bore Hydraulic Cylinder
Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion
16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover.
ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter New Series Existing model.69 kg.0 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set
% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing
Square Tube Type Air Cylinder
Standard: Double cting Single Rod Series C6 Square Tube Type ir Cylinder Series 1 ø, ø, ø, ø, ø, ø Single rod type Series 1 Double rod type Series 1W Non-rotating rod type Series 1K CJ1 CJP CJ2 CM2 C8
King Of Valve Co.,Ltd.
Series variation Series Series Series variation SCP* SCP* U Variation Double acting lubrication type Double acting oil-free type, with switch Double acting Stroke adjustable type (Extended) Double acting
6 Cylinder stroke. Standard stroke Bore size Ø12 Ø16. Action 75, 100 Ø50 Ø63 Ø80 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, Ø100 75, 100 Ø125
Symbol Features Ideal for clamping, press-in and under short stroke condition. Can be installed even in a narrow space with a shorter length in axial thrust direction. Easy installation only with bolts.
Series CLS. Cylinder with Lock. ø125, ø140, ø160, ø180, ø200, ø250
CT.ES-134 C Cylinder with Lock Series CLS ø, ø, ø, ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. Small switches can also be mounted. emergency stops and locking
Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.
Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and
Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet
L F Mounting style asic style xial foot style Rod side flange style With auto switch CVJ L CDVJ L 6 6 How to Order pplicable uto Switches/Refer to pages to for further information on auto switches. Type
Compact Cylinder/Plate type
Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series
Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment
Symbol -N B80-S100 Features With built-in magnet. (Standard) With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double
10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types
ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover
CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP
CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types
Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3)
Slide Unit Series CX/M/L Slide Bearing/CX:ø, ø, ø5 M:ø, ø6, ø0, ø5, ø3 Ball Bushing Bearing/L:ø, ø6, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy
Low Profile Slide Table. Series MXF. ø8, ø12, ø16, ø20. Body mounting(body tapped)
Low Profile Slide Table Series XF ø, ø, ø1, ø Slim and compact style air slide table has parallel design for guide and cylinder. Standard stroke adjustment can be adjusted at each stroke end within mm
Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected.
ir Cylinder ø 20, ø 25, ø 32, ø 40, ø 50, ø 63, ø 80, ø 100 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread
Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32
Slide Unit CX/M/L Series Slide Bearing/CX:ø0, ø, ø5 M:ø0, ø, ø0, ø5, ø3 Ball Bushing Bearing/L:ø0, ø, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy
Air Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) - www.cmafh.com CDG1 With auto switch (uilt-in magnet) Mounting style asic style L xial foot style F Rod side
Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention
ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper
High Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector
Non-rotating Type High Precision Scale Cylinder Series CEP1 ø12, ø How to Order CEP1 12 0 F9N L F High precision scale cylinder Mounting bracket Direct mounting front tapped type Foot type Front flange
Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25
ISO Cylinder Series C ø, ø0, ø, ø, ø, ø Conforming to ISO and CETOP RPP. Series Variations Standard Series C Series Non-rotating rod Series C ction Double acting Single acting Double acting Rod Single
Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism)
Non-rotating Double Power Cylinder Series Double Power Cylinder Series R (without non-rotating mechanism) 2 Non-rotating Double Power Cylinder Double extension output power!! Our unique construction doubles
Series MGP. Compact Guide Cylinder. New end lock type introduced to Series MGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series.22- CL MLG CN CNG MNB CNS CLS CB CV/MVG CXW CXS CXT MX MXU MXH MXS MXQ MXF MXW MXP MG MGQ MGG MGC MGF
Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
ACS2 series. KCC Co., Ltd. PNEUMATIC & HYDRAULIC. ACS2 series. For more info visit us : ACS2 - N LB 32 - S 100
KCC Co., Ltd. Symbol Features With auto switch, rubber bumper (Standard). improves lateral load resistance. Double Acting / Single Rod Double Acting / Double Rod Single Acting / Spring Return Single Acting
Sine Rodless Cylinder Series RE asic Type/ø, ø, ø, ø, ø3 asic type Sine rodless cylinder (basic type) Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and
Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400
NFPA Interchangeable Cylinder: Standard Type Double Acting, Single Rod (Medium Duty) Series NCA1 Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style
ISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
Series CLS. Cylinder with Lock. ø125, ø140, ø160, ø180, ø200, ø250
CT.EUS-134 C -UK Cylinder with Lock Series CLS ø, ø, ø, ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. Small switches can also be mounted. Manual unlocking
Small Bore Hydraulic Cylinder
Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion
Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.
ir Cylinder ø 20, ø 25, ø 32, ø 40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of
Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X
Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) MGJ -Z W MGQ MGG MGC MGF MGT 23 D- -X Non-rotating Double Power Cylinder Double extension output
MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X
Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) 23 MGJ -Z W MGQ MGG MGC MGF MGT D- -X Tube rod diameter External dimension Non-rotating Double
Parallel Style Air Gripper Series MHZ
Parallel tyle ir Gripper eries MHZ 17 Integral linear guide used for high rigidity Repeatability: ±.1 mm Low profile Martensitic stainless steel High degree of mounting flexibility Can be mounted five
3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
Compact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting
Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both
1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1
1.20 L INEAR ACTUATOR: AIR CYLINDER A IR CYLINDER BORE SIZES Ø20~100MM Double acting Clean line A substantial reduction in overall length compared to tie bar designed cylinders High velocity Magnetic piston
Series CNS/ ø125, ø140, ø160
Cylinder with Lock Series / ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. L C C S C C/ CXW CXS CX X XU X XS XQ XF XW XP P Q Series ariations Series Cylinder
Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718.
Courtesy of CM/lodyne/ydradyne Motion Control ydraulic Pneumatic lectrical Mechanical () - www.cmafh.com With auto switch With auto switch (uilt-in magnet) G C CM CM uilt-in Magnet Cylinder Model If a
Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.
ir Cylinder ø20, ø25, ø32, ø40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of auto
CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:
CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating
Plate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63
Plate Cylinder MU Series ø, ø, ø, ø, ø It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting RoHS Small auto switch CUJ CU CQS JCQ CQ2 Reduction of labor for work RQ CQM
Compact Guide Cylinder Series MGQ
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
Compact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
Series OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
Series MXU ø6, ø10, ø16
Compact Slide Series ø, ø, ø1 Displacement accuracy against moments Table edge displacement M1(Pitch moment): 0.02mm or less M2(Yaw moment): 0.01mm or less The miniature linear guide improves the linear
Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 46-54 www.cmafh.com Guide Cylinder Series MGG ø, ø, ø, ø, ø, ø, ø, ø Integration of a basic cylinder and guide
New cylinder body allows small auto switches to be mounted on 4 surfaces.
Toggle Type Air Gripper ø32, ø4, ø5, ø63 New cylinder body allows small auto switches to be mounted on 4 surfaces. RoH Auto switch mounting rail removed. A round slot for mounting small auto switches is