Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Transcription

1 ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover with boss Improved amount of mounting freedom ead cover with boss is added. Easy fine adjustment of auto switch position ine adjustment of the auto switch position is possible by simply loosening the screw attached to the auto switch. Transparent switch bracket improves visibility of indicator LED. ine adjustment of auto switch LED colour indicator ead cover port location Perpendicular to axis is newly added to Ø 6. Improved piping flexibility New Ø 6 Ø 1 Screw attached to auto switch Switch bracket Ø Series CT.EUS2-226D-UK

2 ir Cylinder Part numbers with rod end bracket and/or pivot bracket available Not necessary to order a bracket for the applicable cylinder separately Note) Mounting bracket is shipped together with the product, but not assembled. Example) CDJ2D-5- N W -M9BW-B Pivot bracket None Pivot bracket is shipped together with the N product, but not assembled. : Only for D (double clevis) type : Except Ø 6 N: Kit of pivot bracket and double clevis Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) : Ø 6: Except V, W With rod end bracket V: Single knuckle joint W: Double knuckle joint Rod end cap T: lat type U: Round type Various mounting bracket options Suitable mounting brackets can be D: Double clevis selected for the installation condition. (Except Ø 6) Improved amount of mounting freedom N: : Pivot bracket (Except Ø 6) G: ead flange U: Rod end cap (Round type) : : Rod flange B: Basic E: : Double-side bossed M: Double foot L: Single foot T: Rod end cap (lat type) V: Single knuckle joint (Except Ø 6) W: Double knuckle joint (Except Ø 6) 1 2 mounting types of compact auto switches Band mounting Rail mounting The auto switch mounting type, band or rail can be selected with the model number. Water resistant compact auto switch now available Solid state auto switch D-M9 (V) pplicable to lead wire perpendicular entry type No environmental hazardous substances used Band mounting Rail mounting : Except Ø 6 Specifications and dimensions are the same as the current product. ead cover 4 types of head cover shape are available. Basic xial piping Double clevis (Except Ø 6) With boss

3 Series Easy fine adjustment of auto switch position ine adjustment of the auto switch set position can be performed by loosening the auto switch attached screw without loosening the auto switch mounting band. Operability improved compared with the conventional auto switch set position adjustment, where the complete switch mounting band requires loosening. Switch bracket Visibility of the indicator LED improved with the transparent resin switch bracket ( specification) Switch holder uto switch mounting band Screw attached to auto switch uto switch uto switch mounting screw Variations Bore size stroke Series Variations - Bore size Variations Series ction Type Page 6 1 Built-in magnet ir cushion Double acting Single rod 5 Double acting Double rod 23 Non-rotating rod K- Built-in speed controller - Single acting Double acting Single acting Double acting Single rod (Spring return /extend) Single rod Single rod (Spring return /extend) Single rod Double acting Double rod 73 Direct mount R- Double acting Single rod 78 Direct mount, Non-rotating rod RK- With end lock CBJ2 Single acting Double acting Single acting Double acting Single rod (Spring return /extend) Single rod Single rod (Spring return /extend) Single rod Smooth Cylinder Y- Double acting Single rod Low Speed Cylinder X- Double acting Single rod : The air cylinder with end lock has the same shape as the current product. : or details about the clean series, refer to the catalogue on : ir cushion is only available for Ø 1 and Ø. 2

4 Combinations of Products and Specifications Series : : : Special product (Please contact SMC for details.) : Not available Symbol Specifications Series ction/ Type Page pplicable bore size ( type) K (Non-rotating rod type) Double acting Single acting Double acting Single acting Single rod Double rod Single rod (spring return) Single rod Single rod (spring extend) Single rod (spring return) Ø 6 to Ø Ø 1, Ø Single rod (spring extend) Ø 6 to Ø D Built-in magnet - ir cushion Ø 1, Ø 1-, 11- Clean series 1 Ø 6 to Ø Copper (Cu) and inc (n)-free 6 Ø 1, Ø XB6 eat resistant cylinder ( 1 to 15 C) 3, 4 XB7 Cold resistant cylinder ( 4 to 7 C) 3, 4 Ø 6 to Ø XB9 Low speed cylinder (1 to 5 mm/s) 4 XB13 Low speed cylinder (5 to 5 mm/s) Ø 6 XC3 Special port position 2, 4 Ø 6 to Ø XC8 djustable stroke cylinder/ djustable extension type 4 djustable stroke cylinder/ XC9 djustable retraction type 4 Ø 1, Ø XC1 Dual stroke cylinder/double rod type 4 XC11 Dual stroke cylinder/single rod type 4 XC22 luororubber seal 4 Ø 6 to Ø XC51 With hose nipple XC85 X446 Grease for food processing equipment PTE grease Ø 1, Ø X773 Short pitch mounting Ø 6 1: Mounting type: Not compatible with the clevis type. n auto switch is available in the band mounting type only. 2: n auto switch is available in the band mounting type only. 3: The products with an auto switch are not compatible. 4: The products with an air cushion are not compatible. 5: or details about the smooth cylinder and low speed cylinder, refer to the catalogue on 6: or details, refer to the catalogue on 7: The shape is the same as the current product. 8: vailable only for locking at head end. 9: vailable only for locking at rod end. 1: Ø 1 and Ø only 11: Copper and fl uorine-free [2-] are available as standard products. 3

5 Series (Built-in speed controller type) R (Direct mount type) RK (Direct mount, Non-rotating rod type) CBJ2 (With end lock) 7 Y 5 Smooth Cylinder X 5 Low Speed Cylinder Double acting Double acting Single acting Double acting Single acting Double acting Double acting Double acting Single rod Double rod Single rod Single rod (spring return) Single rod Single rod (spring extend) Single rod (spring return) Single rod (spring extend) Single rod Single rod Single rod Ø 1, Ø Ø Ø 1, Ø Ø 1, Ø Symbol D , XB6 XB7 XB9 XB13 XC3 XC8 9 XC9 XC1 9 XC11 XC22 XC51 XC85 X446 X773 With End Lock Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK CBJ2 uto Switch 4

6 ir Cylinder: Type Double cting, Single Rod Series Ø 6, Ø 1, Ø RoS ow to Order B 6 With auto switch CDJ2 B 6 M9BW B B E D L M G Bore size 6 6 mm 1 1 mm mm pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) None DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit Solid state auto switch Reed auto switch With auto switch (Built-in magnet) Mounting Basic Double-side bossed Double clevis Single foot Double foot Rod fl ange ead fl ange : oot/lange brackets are shipped together with the product, but not assembled. : Double clevis is only available for Ø 1 and Ø. Cushion Rubber bumper ir cushion : Ø 6: Rubber bumper only Cylinder standard stroke Refer to s on page 6. : Refer to Ordering Example of Cylinder ssembly on page 6. Indicator light ead cover port location Perpendicular to axis 3-wire 5 V (NPN equivalent) 96V 96 96V 96 IC circuit Yes 2 V Grommet 1 V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL R xial : or double clevis, double side bossed and head flange, the port is located perpendicular to the cylinder axis. Pivot bracket None Pivot bracket is shipped together with N the product, but not assembled. : Only for D (double clevis) : Pivot bracket is shipped together with the product, but not assembled. : Except Ø 6 Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. : Ø 6: Except knuckle joint 5 m (Example) M9NW None N (Example) 7CN Refer to page 6 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. : Ø 6: Band mounting only Number of auto switches 2 pcs. S 1 pc. n n pcs. uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. : Since there are other applicable auto switches than listed above, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only the auto switch mounting brackets are assembled before shipment.) 5

7 ir Cylinder: Type Double cting, Single Rod Series Symbol Rubber bumper Symbol 1: Ø 6 only Double knuckle joint : Except Ø 6 uto switch Band mounting ir cushion (or details, refer to pages 111 to 12.) Specifi cations -X Change of rod end shape -XB6 eat resistant cylinder (-1 to 15 C) Not available with switch & with air cushion -XB7 Cold resistant cylinder (-4 to 7 C) Not available with switch & with air cushion -XB9 Low speed cylinder (1 to 5 mm/s) Not available with air cushion -XB13 1 Low speed cylinder (5 to 5 mm/s) Not available with air cushion -XC3 Special port location Not available with air cushion -XC8 djustable stroke cylinder/djustable extension type -XC9 djustable stroke cylinder/djustable retraction type -XC1 Dual stroke cylinder/double rod type -XC11 Dual stroke cylinder/single rod type -XC22 luororubber seal Not available with air cushion -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease -X773 1 Short pitch mounting Ordering Example of Cylinder ssembly Cylinder model: CDJ2D-6-NW-M9BW-B Double clevis Pivot bracket Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. Specifications Bore size 6 1 ction Double acting, Single rod luid ir Proof pressure 1 MPa Maximum operating pressure 1.7 MPa Minimum operating Rubber bumper.12 MPa.6 MPa pressure ir cushion.1 MPa mbient and fluid temperature Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Cushion Rubber bumper Rubber bumper/ir cushion Lubrication Not required (Non-lube) Piston speed Rubber bumper 5 to 75 mm/s ir cushion 5 to 1 mm/s llowable kinetic energy Rubber bumper.12 J.35 J.9 J length tolerance s ir cushion (Effective cushion length).7 J (9.4 mm) J (9.4 mm) Bore size stroke Maximum manufacturable stroke 6 15, 3, 45, , 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 4 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) Produced upon receipt of order. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfill the specifi cations due to the defl ection etc. Mounting and ccessories/refer to page 22 for details about part numbers and dimensions. Option Mounted on the product. Can be ordered within the cylinder model. Mounting Basic oot lange Double Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint Rod end cap (lat/round type) T-bracket : pin and retaining rings are included with double clevis and/or double knuckle joint. : Double clevis is only available for Ø 1 and Ø. Mounting Brackets/Part No. Mounting bracket 6 Bore size 1 oot CJ-L6C CJ-L1C CJ-LC lange CJ-6C CJ-1C CJ-C T-bracket CJ-T1C CJ-TC : T-bracket is used with double clevis (D). Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Moisture Control Tube Series IDK When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. Simply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. or details, refer to the IDK series in the catalogue on 6 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

8 Series Weights [g] Bore size Rubber bumper ir cushion Basic Basic weight xial piping (When the stroke Double clevis (including clevis pin) is zero) ead-side bossed dditional weight per 15 mm of stroke Single foot Mounting bracket Double foot 5 5 weight Rod fl ange ead fl ange ccessories Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) Rod end cap (Round type) T-bracket Precautions Refer to page 121 before handling. : Mounting nut and rod end nut are included in the basic weight. : Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) L1-45 Basic weight 22 (Ø 1) dditional weight 4/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 8 (xial foot) /15 x = 42 g Clean Series Low Speed Cylinder 1- Mounting 6 1 ead cover port location X Mounting 1 ead cover port location Clean Series Low Speed Cylinder ir cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator s rod section having a double seal construction. Smooth operation with a little sticking and slipping at low speed. Can start smoothly with a little ejection even after being rendered for hours. Specifications ction Double acting, Single rod Bore size 6, 1, Maximum operating pressure.7 MPa Minimum operating Ø 6.14 MPa pressure Ø 1, Ø.8 MPa Cushion Rubber bumper/ir cushion stroke Same as standard type. (Refer to page 6.) uto switch Mountable (Band mounting) Mounting : Ø 1 and Ø only Construction Basic, Double-side bossed, Single/Double foot, Rod/ead fl ange The dimensions are the same as the double acting, single rod type. Specifications ction Double acting, Single rod Bore size 1, luid ir Proof pressure 1.5 MPa Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication length tolerance Piston speed llowable kinetic energy Ø 1 Ø.7 MPa.6 MPa Without auto switch: -1 to 7 C (No freezing) With auto switch: -1 to 6 C Rubber bumper ( equipment) Not required (Non-lube) to 3 mm/s.35 J.9 J : The above fi gure is for Ø. or the detailed specifi cations, refer to the catalogue on or details, refer to the catalogue on 7

9 ir Cylinder: Type Double cting, Single Rod Series Construction (Not able to disassemble) Ø 6 Rubber bumper Ø 1, Ø Rubber bumper Ø 1, Ø ir cushion!!! r! o K!! e i! u!! Component Parts No. Description Material Note 1 Rod cover luminium alloy 1B Seal retainer luminium alloy Ø 6 only 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy 8 Bumper Urethane 9 Rod seal R 1 Cushion seal R w y With auto switch With auto switch! t With auto switch No. Description Material Note 11 Piston seal R 12 Tube gasket R 13 Wear ring Resin 14 Cushion needle Carbon steel 15 Cushion ring luminium alloy Needle seal R 17 Mounting nut Rolled steel 18 Rolled steel 19 Magnet 2 Spacer luminium alloy Ø 6: Without magnet 8 With End Lock Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK CBJ2 uto Switch

10 Series Dimensions Basic (B) B6 ead cover port location Ø NDh8 G Piping port 2 x M5 x.8 GB B B.3 T N + S + Ø 9 Piping port 2 x M5 x S + ead cover port location xial location (R) NC B 1 ead cover port location Ø NDh8 Piping port M5 x.8 Section Y detail Y xial location (R) : The overall cylinder length does not change. G Piping port 2 x M5 x.8 GB.3 B N S + + B.3 or details of the mounting nut, refer to page 22. Bore size B C D G GB N NC NDh8 S S T M3 x M6 x M4 x M8 x M5 x M1 x

11 ir Cylinder: Type Double cting, Single Rod Series Dimensions Basic (B) With air cushion: B 1 G Piping port 2 x M5 x.8 W N or details of the mounting nut, refer to page 22. ead cover port location S + + Dimensions other than the table below are the same as those on page 9. Bore size B C G GB N W WB S WB GB.3 B Piping port M5 x.8 ead cover port location xial location (R) : The overall cylinder length does not change. B.3 45 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 1

12 Series Dimensions Single foot (L) L6 ead cover port location Ø 9 Piping port 2 x M5 x B.3 Piping port M5 x.8 G Cover surface L LB LY S + NC ead cover port location xial location (R) 2 x Ø LC Mounting hole B.3 G Piping port 2 x M5 x.8 GB Cover surface L LB LY LT X Y T N + S + LX L L 1 ead cover port location Piping port 2 x M5 x.8 ead cover port location xial location (R) : The overall cylinder length does not change. GB 2 x Ø LC Mounting hole B.3 B.3 LT X Y N S + + LX L or details of the mounting nut, refer to page 22. Bore size B C D G GB LB LC L LT LX LY L N NC S S T X Y M3 x M6 x M4 x M8 x M5 x M1 x

13 ir Cylinder: Type Double cting, Single Rod Series Dimensions Single foot (L) With air cushion: L 1 45 B.3 B.3 G N W or details of the mounting nut, refer to page 22. ead cover port location Piping port 2 x M5 x.8 S + + Dimensions other than the table below are the same as those on page 11. Bore size B C G GB LB N W WB S GB WB Piping port M5 x.8 ead cover port location xial location (R) : The overall cylinder length does not change. Cover surface LB Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 12

14 Series Dimensions Double foot (M) M6 4 x Ø LC Mounting hole G Piping port 2 x M5 x.8 GB Cover surface LY LB L LT X T Y N S + LS + + Y X LT LX L M 1 4 x Ø LC Mounting hole Cover surface L LB LY G Piping port 2 x M5 x.8 GB LT LT X Y N Y X LX L S + LS + + or details of the mounting nut, refer to page 22. Bore size D G GB LB LC L LS LT LX LY L N S T X Y M3 x M6 x M4 x M8 x M5 x M1 x

15 ir Cylinder: Type Double cting, Single Rod Series Dimensions Double foot (M) With air cushion: M B View E B.3 G N W or details of the mounting nut, refer to page 22. Piping port 2 x M5 x.8 S + + With ir Cushion/Dimensions other than the table below are the same as those on page 13. Bore size B C G GB LB N W WB S GB View E WB Cover surface LB Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 14

16 .3 Series Dimensions Rod flange () 6 ead cover port location B.3 G Piping port 2 x M5 x.8 GB Cover surface B Y B.3 T T N S + + X 2 x Ø C Mounting hole Ø 9 Piping port 2 x M5 x.8 G Piping port 2 x M5 x.8 GB Cover surface B B Y S + ead cover port location xial location (R) NC 1 ead cover port location B.3 T N S + + X 2 x Ø C Mounting hole Piping port M5 x.8 ead cover port location xial location (R) : The overall cylinder length does not change. or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y G GB N NC S S T M3 x M6 x M4 x M8 x M5 x M1 x

17 .3 ir Cylinder: Type Double cting, Single Rod Series Dimensions Rod flange () With air cushion: 1 45 B.3 B G N W or details of the mounting nut, refer to page 22. ead cover port location Piping port 2 x M5 x.8 S + + Dimensions other than the table below are the same as those on page 15. Bore size B C B G GB N W WB S GB WB Piping port M5 x.8 ead cover port location xial location (R) : The overall cylinder length does not change. Cover surface B Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock

18 .3 Series Dimensions ead flange (G) G6 Cover surface B Y G Piping port 2 x M5 x.8 GB B.3 X 2 x Ø C Mounting hole T N S + + T B.3 G 1 Cover surface G Piping port 2 x M5 x.8 GB B Y B X 2 x Ø C Mounting hole N S + T B.3 + or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y G GB N S T M3 x M6 x M4 x M8 x M5 x M1 x

19 .3 ir Cylinder: Type Double cting, Single Rod Series Dimensions ead flange (G) With air cushion: G 1 Cover surface B or details of the mounting nut, refer to page 22. G Piping port 2 x M5 x.8 N W S + + With ir Cushion/Dimensions other than the table below are the same as those on page 17. Bore size B C B G GB N W WB S GB WB B B.3 45 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 18

20 C B.3.3 C B.3.3 Series Dimensions Double clevis (D) D 1 G Piping port 2 x M5 x.8 GB D Clevis pin (Ø cdd9.6) C.3 CX N S + + U R B.3 + With air cushion: D 1 G Piping port 2 x M5 x.8 GB 45 C.3 N S B.3 W WB : clevis pin and retaining rings are included. Bore size B C CD (cd) CX C D G GB N R S U M4 x M5 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C C G GB N W WB S

21 ir Cylinder: Type Double cting, Single Rod Series Dimensions Double-side bossed (E) E6 E 1 Ø NDh8 Ø NDh8 N T Piping port 2 x M5 x.8 + S + Section Y detail Y G Piping port 2 x M5 x.8 N + S + GB or details of the mounting nut, refer to page 22. Bore size B C D G GB N NDh8 S T M3 x M6 x M4 x M8 x M5 x M1 x YY GB B.3 YY B.3.3 B B.3 Ø NDh8 Section YY detail Ø NDh8 Section YY detail Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch 2

22 Series Dimensions Double-side bossed (E) With air cushion: E 1 G Piping port 2 x M5 x.8 GB 45.3 B N S + + B.3 W WB or details of the mounting nut, refer to page 22. With ir Cushion/Dimensions other than the table below are the same as those on page 2. Bore size B C G GB N W WB S

23 4 x Ø TC TT 12 Series Dimensions of ccessories (Option) Single Knuckle Joint Clevis Pin Knuckle Pin ND1 TK TX TV TN 12 Ø ND hole 1 xis d9 Material: Rolled steel Part no. pplicable bore size 1 L1 ND1 NX R1 U1 I-J1C M4 x I-JC 8 25 M5 x TU +.2 T T (S + ) (U) TY TW 12 TD1 Material: Stainless steel Part no. pplicable bore size Dd9 d L L1 m t Included retaining ring CD-J Type C 3.2 CD Type C 5 CD-J Type C 3.2 : or Ø 1 double clevis type, with air cushion and built-in speed controller. : Retaining rings are included with a clevis pin. Material: Stainless steel Part no. pplicable bore size Dd9 d L L1 m t Double Knuckle Joint Mounting Nut Rod End Nut Material: Rolled steel pplicable Part no. bore size 1 L L1 Y-J1C M4 x.7 Y-JC M5 x.8 Part no. NDd9 ND1 NX R1 U1 Y-J1C Y-JC : knuckle pin and retaining rings are included. T-bracket Part no. pplicable Part no. bore size TC TD1 T TK TN TT TU TV TW TX TY T CJ-T1C CJ-TC : T-bracket includes a T-bracket base, single knuckle joint, hexagon socket head bolt and spring washer. : or dimensions of (U) and (S + ), refer to the double clevis drawing on page 19. Material: Carbon steel pplicable bore size B1 C1 d 1 SNJ-6C M6 x 1. 4 SNJ-1C M8 x 1. 4 SNJ-C 14.2 M1 x 1. 4 SNKJ-C M12 x 1. 4 : or Ø non-rotating type. (Use SNJ-C for Ø 1 non-rotating type.) Rod End Cap lat type/cj-c Included retaining ring CD-J Type C 3.2 IY-J Type C 5 : or Ø 1, a clevis pin is diverted. : Retaining rings are included with a knuckle pin. Part no. Round type/cj-cr Material: Carbon steel pplicable bore size B2 C2 d 2 NTJ-6B M3 x NTJ-1C M4 x NTJ-15C M5 x.8 4 Material: Polyacetal Part no. pplicable lat type Round type bore size D L N R W CJ-C6 CJ-CR M3 x CJ-C1 CJ-CR M4 x CJ-C CJ-CR M5 x Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

24 ir Cylinder: Type Double cting, Double Rod Series W Ø 6, Ø 1, Ø RoS ow to Order W B 6 With auto switch CDJ2W L 6 M9BW B Bore size 6 6 mm 1 1 mm mm pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Solid state auto switch Indicator light uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. : Ø 6: Band mounting only Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) None DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit 3-wire 5 V (NPN equivalent) 96V 96 96V 96 IC circuit Yes 2 V Grommet 1 V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) 7CN : Since there are other applicable auto switches than listed above, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only the auto switch mounting brackets are assembled before shipment.) Reed auto switch 23 B L With auto switch (Built-in magnet) Mounting Basic oot lange : oot/lange brackets are shipped together with the product, but not assembled. Cylinder standard stroke Refer to s on page 24. Cushion Rubber bumper ir cushion : Ø 6: Rubber bumper only uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. Number of auto switches 2 pcs. S 1 pc. n n pcs. Refer to page 24 for details.

25 ir Cylinder: Type Double cting, Double Rod Series W Symbol Double acting, Double rod, Rubber bumper ir cushion Symbol -X -XB6 -XB7 (or details, refer to pages 111 to 12.) Specifications Change of rod end shape eat resistant cylinder (-1 to 15 C) Not available with switch & with air cushion Cold resistant cylinder (-4 to 7 C) Not available with switch & with air cushion -XC22 luororubber seal Not available with air cushion -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Precautions Refer to page 121 before handling. Moisture Control Tube Series IDK When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. Simply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. or details, refer to the IDK series in the catalogue on Specifications Bore size 6 1 ction Double acting, Double rod luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating Rubber bumper.15 MPa.1 MPa pressure ir cushion.1 MPa mbient and fluid temperature Without auto switch: -1 C to 7 C (No freezing) With auto switch:-1 C to 6 C Cushion Rubber bumper Rubber bumper/ir cushion Lubrication Not required (Non-lube) Piston speed Rubber bumper 5 to 75 mm/s ir cushion 5 to 1 mm/s Rubber bumper.12 J.35 J.9 J llowable kinetic ir cushion.7 J.18 J energy (Effective cushion length) (9.4 mm) (9.4 mm) length tolerance +1. s Bore size stroke 6 15, 3, 45, , 3, 45, 6, 75, 1, 125, 15 15, 3, 45, 6, 75, 1, 125, 15, 175, 2 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) Produced upon receipt of order. : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfill the specifications due to the deflection etc. Mounting and ccessories/refer to page 22 for details about part numbers and dimensions. Option Mounting Brackets/Part No. Mounting bracket 6 Bore size 1 oot CJ-L6C CJ-L1C CJ-LC lange CJ-6C CJ-1C CJ-C Weights Mounted on the product. Please order separately. Mounting Basic oot lange Mounting nut Single knuckle joint Double knuckle joint Rod end cap (lat/round type) : pin and retaining rings are shipped together with double knuckle joint. Bore size Rubber bumper ir cushion Basic weight (When the stroke is zero) Basic dditional weight per 15 mm of stroke Mounting bracket oot 5 5 weight lange Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (lat type) Rod end cap (Round type) : Mounting nut and rod end nut are included in the basic weight. Calculation: Example) WL1-45 Basic weight 29 (Ø 1) dditional weight 4.5/15 stroke Cylinder stroke 45 stroke Mounting bracket weight (oot) /15 x 45 + = 58.5 g [g] 24 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

26 Series W Clean Series 1-W Mounting 1 Clean Series ir cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator s rod section having a double seal construction. or the detailed specifications, refer to the catalogue on Specifications ction Double acting, Double rod Bore size 1, Maximum operating pressure.7 MPa Minimum operating pressure.1 MPa Cushion Rubber bumper stroke Same as standard type. (Refer to page 24.) uto switch Mountable (Band mounting) Mounting Basic, oot, lange Construction (Not able to disassemble) With auto switch 25

27 ir Cylinder: Type Double cting, Double Rod Series W Construction (Not able to disassemble) Ø 6 Rubber bumper Ø 1, Ø Rubber bumper!4!2!6!5 K K i e!1 w u y!!8 y!8!7!9!6!5 i K!1 Ø 1, Ø ir cushion w e u! y!6 e!5 i K o!1 w u! y!3 Component Parts No. Description Material Note 1 Rod cover luminium alloy 1B Seal retainer luminium alloy Ø 6 only 2 Cylinder tube Stainless steel 3 Piston rod Stainless steel 4 Piston luminium alloy 5 Piston B luminium alloy 6 Piston luminium alloy 7 Bumper Urethane 8 Rod seal R 9 Cushion seal R With auto switch t t!7 With auto switch!7 r With auto switch No. Description Material Note 1 Piston seal R 11 Tube gasket R 12 Cushion needle Carbon steel 13 Cushion ring luminium alloy 14 Needle seal R 15 Mounting nut Rolled steel Rolled steel 17 Magnet 18 Spacer luminium alloy Ø 6 only 19 Spacer B luminium alloy Ø 6 only r 26 With End Lock Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK CBJ2 uto Switch

28 Series W Basic (B) WB6 Ø NDh8 G Piping port 2 x M5 x.8 G Ø NDh8.3 Ø NDh8 G Piping port 2 x M5 x.8 G Ø NDh8 B.3 N N S x + B.3 G Piping port 2 x M5 x.8 G 45 B.3 B T N S x N T + B.3 WB 1 With air cushion: WB 1 N S x N B.3 W W or details of the mounting nut, refer to page 22. Bore size B C D G N NDh8 S T M3 x M6 x 1. 3 (66) (122) M4 x M8 x M5 x M1 x 1. 5 With ir Cushion/Dimensions other than the table below are the same as the table above. 27 Bore size B C G N W S : ( ) in S and dimensions: With auto switch

29 ir Cylinder: Type Double cting, Double Rod Series W oot (L) WL6 45 WL 1 B.3 B.3 B.3 B.3 G LT LT X X Y With air cushion: WL 1 View E Y G N Piping port 2 x M5 x.8 G Piping port 2 x M5 x.8 N T N Piping port 2 x M5 x.8 View E G LT N Y X S x S x View E G S x N N G T Y View E LT X x Ø LC Mounting hole.3 B LX L B.3 View E Cover surface L LB LY View E Cover surface LB Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK W or details of the mounting nut, refer to page 22. Bore size B C D G LB LC L LT LX LY L N S T X Y M3 x.5 M6 x (66) (122) M4 x M8 x M5 x M1 x With ir Cushion/Dimensions other than the table below are the same as the table above. Bore size B C G LB N W S W : ( ) in S and dimensions: With auto switch 28 With End Lock CBJ2 uto Switch

30 Series W lange () W6 Piping port 2 x M5 x.8 G View E G Ø NDh8 Cover surface G Piping port 2 x M5 x.8 G Cover surface X 45 B B.3 B Y B.3 T N N S x 2 x Ø C Mounting hole G Piping port 2 x M5 x.8 G Cover surface B.3 B.3 B Y B.3 View E T T N S x N T + X 2 x Ø C Mounting hole W 1 With air cushion: W 1 B.3 N S x N W or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y G N S T M3 x.5 M6 x (66) (122) M4 x M8 x M5 x M1 x 1. 5 : ( ) in S and dimensions: With auto switch With ir Cushion/Dimensions other than the table below are the same as the table above. 29 Bore size B C G B N W S W

31 With auto switch : or double clevis, double side bossed and head fl ange, the port is located perpendicular to the cylinder axis. : Not applicable to single acting, spring extend (T). Solid state auto switch Cylinder standard stroke Refer to s on page 31. B CDJ2 B Perpendicular to axis R Indicator light ir Cylinder: Type Single cting, Spring Return/Extend Series Ø 6, Ø 1, Ø xial S S ction S Single acting, Spring return T Single acting, Spring extend pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. With auto switch (Built-in magnet) Mounting Pivot bracket B Basic None E Double-side bossed Bore size Pivot bracket is shipped together N D Double clevis with the product, but not assembled. 6 6 mm L Single foot 1 1 mm : Only for D (double clevis) M Double foot mm : Pivot bracket is shipped together Rod fl ange with the product, but not assembled. : Except Ø 6 G ead fl ange Rod end bracket : oot/lange brackets are shipped together with None the product, but not assembled. : Double clevis is only available for Ø 1 and Ø. V Single knuckle joint W Double knuckle joint ead cover port location T Rod end cap (lat type) U Rod end cap (Round type) M9BW 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL B RoS Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit Reed auto switch ow to Order uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. : Rod end bracket is shipped together with the product, but not assembled. 2 pcs. : knuckle joint pin is not provided S 1 pc. with the single knuckle joint. : Ø 6: Except knuckle joint n n pcs. : Refer to Ordering Example of Cylinder ssembly on page wire 5 V Grommet Yes (NPN equivalent) 96V 96 96V 96 IC circuit 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W 5 m (Example) M9NW None N (Example) 7CN Refer to page 31 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. : Ø 6: Band mounting only Number of auto switches : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) 3 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

32 Series Spring extend Spring return Symbol Single acting, Spring return, Rubber bumper Symbol Specifi cations -X Change of rod end shape -XC22 luororubber seal -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease -X773 1 Short pitch mounting/single acting, spring return 1: Ø 6 only uto switch Band mounting Double knuckle joint Single acting, Spring extend, Rubber bumper (or details, refer to pages 111 to 12.) Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Precautions Refer to page 121 before handling. Ordering Example of Cylinder ssembly Cylinder model: CDJ2D-45S-NW-M9BW-B Double clevis Pivot bracket Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. Specifications Bore size 6 1 ction Single acting, Spring return/single acting, Spring extend luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating Spring return.2 MPa.15 MPa pressure Spring extend.25 MPa.15 MPa mbient and fluid temperature Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Cushion Rubber bumper Lubrication Not required (Non-lube) length tolerance Piston speed 5 to 75 mm/s llowable kinetic energy.12 J.35 J.9 J s Bore size stroke 6 15, 3, 45, , 3, 45, 6 15, 3, 45, 6, 75, 1, 125, 15 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfi ll the specifi cations due to the defl ection etc. Mounting Brackets/Part No. IN +1. Spring Reaction orce Bore size Spring reaction force [N] Primary Secondary Spring with primary mounting load When the spring is set in the cylinder Spring with secondary mounting load OUT When the spring is contracted by applying air Mounting bracket 6 Bore size 1 oot CJ-L6C CJ-L1C CJ-LC lange CJ-6C CJ-1C CJ-C T-bracket 1 CJ-T1C CJ-TC 1: T-bracket is used with double clevis (D). Mounting and ccessories/refer to page 22 for details about part numbers and dimensions. Option Mounted on the product. Can be ordered within the cylinder model. Mounting Basic oot lange Double Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint Rod end cap (lat/round type) T-bracket : pin and retaining rings are shipped together with double clevis and double knuckle joint. : Double clevis is only available for Ø 1 and Ø. Moisture Control Tube Series IDK When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. Simply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. or details, refer to the catalogue on 31

33 ir Cylinder: Type Single cting, Spring Return/Extend Series Weights Spring Return Basic weight Mounting bracket weight ccessories Bore size 6 1 Mounting Basic xial piping ead-side bossed Basic xial piping Double clevis (including clevis pin) ead-side bossed Spring Extend Bore size 6 1 Basic weight Mounting bracket weight ccessories Basic xial piping Double clevis (including clevis pin) ead-side bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot Double foot 5 Rod fl ange ead fl ange Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) Rod end cap (Round type) T-bracket 32 5 : Mounting nut and rod end nut are included in the basic weight. : Mounting nut is not attached to the double clevis, so the mounting nut weight is already subtracted. Calculation: Example) L1-45S Basic weight 44 (Ø 1-45 stroke) Mounting bracket weight 8 (Single foot) = 52 g Mounting Basic ead-side bossed Basic xial piping Double clevis (including clevis pin) ead-side bossed Basic xial piping Double clevis (including clevis pin) [g] ead-side bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot Double foot 5 Rod fl ange ead fl ange Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) Rod end cap (Round type) T-bracket 32 5 : Mounting nut and rod end nut are included in the basic weight. : Mounting nut is not attached to the double clevis, so the mounting nut weight is already subtracted. Calculation: Example) L1-45T Basic weight 42 (Ø 1-45 stroke) Mounting bracket weight 8 (Single foot) = 5 g [g] 32 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

34 Series Construction (Not able to disassemble) Single acting, Spring return Ø 6 With auto switch Ø 1, Ø With auto switch Single acting, Spring extend Ø 6 With auto switch Ø 1, Ø With auto switch Component Parts No. Description Material Note 1 Rod cover luminium alloy 1B Seal retainer luminium alloy Ø 6 only 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy 8 Bumper Urethane 9 Bumper B Urethane No. Description Material Note 1 Piston seal R 11 Tube gasket R 12 Wear ring Resin 13 Return spring Piano wire 14 Spring seat luminium alloy 15 Mounting nut Rolled steel Rolled steel 17 Magnet 18 Rod seal R 33

35 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Return: Basic (B) B B 1 Ø 14 Ø Piping port M5 x.8 S ead cover port location Ø NDh8 Section Y detail S ead cover port location xial location (R) : The overall cylinder length does not change. Ø NDh8 ead cover port location Section Y detail or details of the mounting nut, refer to page 22. Bore size Y Piping port M5 x.8 N S + + Y + N Piping port M5 x.8 S + ead cover port location xial location (R) B C D GB N NC NDh M3 x M6 x 1. S to 15 st 37 (42) GB NC B.3 Piping port M5 x.8 to 3 st 46 (51) 31 to 45 st 5 (55) GB 46 to 6 st 64 (69) S 61 to 75 st B.3 B.3 76 to 1 st B.3 11 to 125 st 126 to 15 st M4 x M8 x M5 x M1 x Bore size 6 5 to to 31 to 15 st 3 st 45 st 34.5 (39.5) 43.5 (48.5) 47.5 (52.5) 46 to 6 st 61.5 (66.5) S 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 65 (7) 74 (79) 78 (83) 92 (97) 62.5 (67.5) 71.5 (76.5) 75.5 (8.5) 89.5 (94.5) 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st : ( ) in S, S, and dimensions: With auto switch 34 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

36 Series Single cting, Spring Return: Double-side Bossed (E) E6 S 12.3 Ø 14 Y Piping port M5 x.8 GB YY B N S + + B.3 Ø NDh8 Section Y detail Y B.3 Ø NDh8 Ø NDh8 Ø NDh8 Section Y detail Section YY detail E 1 S Piping port M5 x.8 GB YY Section YY detail N S + + B.3 or details of the mounting nut, refer to page 22. Bore size B C D GB N NDh8 5 to to 31 to 15 st 3 st 45 st 46 to 6 st S 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st 5 to to 31 to 15 st 3 st 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st M3 x M6 x (42) (51) (55) (69) (78) (87) (91) (15) M4 x M8 x M5 x M1 x : ( ) in S and dimensions: With auto switch 35

37 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Return: Single oot (L) L6 B L 1 B.3 B.3 Ø 9 B S ead cover port location Piping port M5 x.8 GB LT LT X Y X Y ead cover port location or details of the mounting nut, refer to page 22. Bore size S N N S + + S + + S + + NC Piping port M5 x.8 2 x Ø LC Mounting hole Piping port M5 x.8 B C D GB LB LC L LT LX LY L N M3 x M6 x 1. 2 x Ø LC Mounting hole GB 5 to 15 st 37 (42) LX L LX L Piping port M5 x.8 to 3 st 46 (51) 31 to 45 st 5 (55) Cover surface 46 to 6 st 64 (69) L LB LY Cover surface S 61 to 75 st L LB LY 76 to 1 st 11 to 125 st 126 to 15 st M4 x M8 x M5 x M1 x Bore size 6 5 to 15 st 34.5 (39.5) to 3 st 43.5 (48.5) 31 to 45 st 47.5 (52.5) 46 to 6 st S 61.5 (66.5) 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st X Y 5 7 ead cover port location xial location (R) 5 to 15 st 65 (7) to 3 st 74 (79) 31 to 45 st 78 (83) ead cover port location xial location (R) : The overall cylinder length does not change. 46 to 6 st 92 (97) 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 62.5 (67.5) to 3 st 71.5 (76.5) 31 to 45 st 75.5 (8.5) 46 to 6 st 89.5 (94.5) 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st : ( ) in S, S, and dimensions: With auto switch 36 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

38 Series Single cting, Spring Return: Double oot (M) M6 S GB Piping port M5 x.8 2 x Ø LC Mounting hole Cover surface LT Y N Y X S + LS + + X LT 4 x Ø LC Mounting hole GB Piping port M5 x.8 Cover surface L LB LY L LB LY LX L M 1 S LT X Y N S + LS + + Y LT X LX L or details of the mounting nut, refer to page 22. Bore size D GB LB LC L to 15 st 51 (56) to 3 st 6 (65) 31 to 45 st 64 (69) 46 to 6 st 78 (83) LS 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st LT LX LY L N M3 x M4 x M5 x Bore size M6 x 1. 5 to 15 st 37 (42) to 3 st 46 (51) 31 to 45 st 5 (55) 46 to 6 st 64 (69) S 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st 5 7 X Y 5 to 15 st 77 (82) to 3 st 86 (91) 31 to 45 st 9 (95) 46 to 6 st 14 (19) 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st M8 x M1 x : ( ) in LS, S and dimensions: With auto switch 37

39 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Return: Rod lange () 6 S ead cover port location B B.3 1 B.3 Ø 9 B S Piping port M5 x.8 GB ead cover port location or details of the mounting nut, refer to page 22. Bore size T N T N S + Piping port M5 x.8 S + Piping port M5 x.8 S + NC GB Piping port M5 x.8 B C D B C T X Y GB N NC M3 x M6 x 1. 5 to 15 st 37 (42) to 3 st 46 (51) X X 31 to 45 st 5 (55) Cover surface B Y 2 x Ø C Mounting hole 46 to 6 st 64 (69) 2 x Ø C Mounting hole Cover surface S 61 to 75 st B Y 76 to 11 to 126 to 1 st 125 st 15 st M4 x M8 x M5 x M1 x Bore size 6 5 to 15 st 34.5 (39.5) to 3 st 43.5 (48.5) 31 to 45 st 47.5 (52.5) 46 to 6 st 61.5 (66.5) S 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 65 (7) ead cover port location xial location (R) 74 (79) 78 (83) 92 (97) ead cover port location xial location (R) : The overall cylinder length does not change (67.5) 71.5 (76.5) 75.5 (8.5) 89.5 (94.5) 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st : ( ) in S, S, and dimensions: With auto switch 38 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

40 Series Single cting, Spring Return: ead lange (G) G6 S Cover surface GB Piping port M5 x.8 B.3 B Y X 2 x Ø C Mounting hole N S + + T B.3 G 1 S Cover surface B.3 Piping port M5 x.8 GB B Y X 2 x Ø C Mounting hole N S + + T B.3 or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y GB N M3 x M6 x M4 x M8 x M5 x M1 x 1. Bore size S 6 5 to 15 st 37 (42) to 3 st 46 (51) 31 to 45 st 5 (55) 46 to 6 st 64 (69) 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 73 (78) to 3 st 82 (87) 31 to 45 st 86 (91) 46 to 6 st 1 (15) 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st : ( ) in S and dimensions: With auto switch 39

41 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Return: Double Clevis (D) D 1 C.3 CX C.3 S N S Piping port M5 x.8 GB U R D9 +.3 Clevis pin (Ø cdd9.3.6) S Bore size B C CD CX C D GB N R U 5 to to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Bore size 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st : clevis pin and retaining rings are included. B.3 B.3 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 4

42 Series Single cting, Spring Extend: Basic (B) B6 T Ø 9 B Ø NDh8 G Piping port 2 x M5 x T N + 2 x S + B.3 B 1 T Ø NDh8 Section Y detail Y G Piping port M5 x.8 B.3 + N + 2 x S + B.3 or details of the mounting nut, refer to page 22. Bore size B C D G N NDh8 T M3 x M6 x M4 x M8 x M5 x M1 x 1. Bore size 6 5 to 15 st 46.5 (51.5) to 3 st 55.5 (6.5) 31 to 45 st 59.5 (64.5) 46 to 6 st 73.5 (78.5) S 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 74.5 (79.5) to 3 st 83.5 (88.5) 31 to 45 st 87.5 (92.5) 46 to 6 st 11.5 (.5) 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st : ( ) in S and dimensions: With auto switch 41

43 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Extend: Double-side Bossed (E) E6 E 1 T T Ø NDh8 + Section Y detail Ø NDh8 T Y G + or details of the mounting nut, refer to page 22. G Piping port 2 x M5 x.8 N N + 2 x Piping port M5 x x S + S + YY B.3 B.3 B.3 Ø NDh8 Section YY detail Bore size B C D G N NDh M3 x M6 x M4 x M8 x M5 x M1 x 1. Bore size 6 5 to 15 st 46.5 (51.5) to 3 st 55.5 (6.5) 31 to 45 st 59.5 (64.5) 46 to 6 st 73.5 (78.5) S 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 82.5 (87.5) to 3 st 91.5 (96.5) 31 to 45 st 95.5 (1.5) 46 to 6 st 19.5 (114.5) 61 to 75 st B.3 76 to 1 st 11 to 125 st 126 to 15 st : ( ) in S and dimensions: With auto switch 42 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

44 Series Single cting, Spring Extend: Single oot (L) L6 T 2 x Ø LC Mounting hole Ø 9 G Piping port M5 x.8 Cover surface 2 x Ø LC Mounting hole G Piping port M5 x.8 Cover surface B.3 L LB LY B L LB LY B.3 Rod cover side.3 LX LT 8 X Y T N L ead cover side + S x L 1 T B.3 + LT X Y N + 2 x S + LX L or details of the mounting nut, refer to page 22. Bore size B C D G LB LC L LT LX LY L N T M3 x.5 3 M6 x M4 x M8 x M5 x M1 x 1. S Bore size 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st X Y 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st (51.5) 55.5 (6.5) 59.5 (64.5) 73.5 (78.5) (79.5) 83.5 (88.5) 87.5 (92.5) 11.5 (.5) : ( ) in S and dimensions: With auto switch 43

45 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Extend: Double oot (M) M6 + M 1 + LT X T T LT X G Piping port 2 x M5 x.8 T Y G Y N or details of the mounting nut, refer to page 22. Bore size N + 2 x Piping port M5 x x D G LB LC L to 15 st 6.5 (65.5) S + LS + S + LS + to 3 st 69.5 (74.5) 31 to 45 st 73.5 (78.5) 46 to 6 st LS 87.5 (11.5) 61 to 75 st Y Y 76 to 1 st 4 x Ø LC Mounting hole X LT 4 x Ø LC Mounting hole LT X 11 to 125 st 126 to 15 st LX L LX L Cover surface L LB LY Cover surface L LB LY LT LX LY L M3 x M4 x M5 x.8 Bore size N 5 to 15 st to 3 st 31 to 45 st 46 to 6 st S 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st X Y 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st 6 3 M6 x (51.5) (6.5) (64.5) (78.5) (91.5) (1.5) (14.5) (118.5) M8 x M1 x : ( ) in LS, S and dimensions: With auto switch 44 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

46 Series Single cting, Spring Extend: ead lange (G) G6 T Cover surface Ø NDh8 G Piping port 2 x M5 x.8 B Y B.3 X 2 x Ø C Mounting hole T N x S + T B.3 G 1 T Cover surface G Piping port M5 x.8 B Y B.3 X 2 x Ø C Mounting hole + N + 2 x S + T B.3 or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y G N M3 x.5 3 M6 x M4 x M8 x M5 x M1 x 1. Bore size 6 5 to 15 st 46.5 (51.5) to 3 st 55.5 (6.5) 31 to 45 st 59.5 (64.5) 46 to 6 st 73.5 (78.5) S 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st 82.5 (87.5) to 3 st 91.5 (96.5) 31 to 45 st 95.5 (1.5) 46 to 6 st 19.5 (114.5) 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st : ( ) in S and dimensions: With auto switch 45

47 ir Cylinder: Type Single cting, Spring Return/Extend Series Single cting, Spring Extend: Rod lange () 6.3 B B.3 C.3 B.3 1 B.3 D 1 C.3 Rod cover side.3 8 CX T Ø 9 8 T T.3 ead cover side + T T G N + 2 x G Piping port M5 x G T N + 2 x Piping port M5 x.8 Piping port M5 x.8 S + N S x + 2 x S + 2 x Ø LC Mounting hole 4 x Ø LC Mounting hole U R X X Cover surface B Y Cover surface or details of the mounting nut, refer to page 22. S Bore B C D B C T X Y G N T 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M3 x.5 3 M6 x (51.5) (6.5) (64.5) (78.5) (79.5) (88.5) (92.5) (.5) M4 x M8 x M5 x M1 x Single cting, Spring Extend: Double Clevis (D) B Y : ( ) in S and dimensions: With auto switch D9 +.3 Clevis pin (Ø cdd9.3.6) : clevis pin and retaining rings are included. S Bore size B C CD CX C D G N R U 5 to to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Bore size 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st B.3 B.3 46 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

48 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Ø 1, Ø RoS With auto switch CDJ2K Bore size 1 1 mm mm K B With auto switch (Built-in magnet) Mounting B Basic E Double-side bossed D Double clevis L Single foot : oot/lange brackets M Double foot are shipped together Rod fl ange with the product, but G ead fl ange not assembled. ead cover port location B 6 6 pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Solid state auto switch Indicator light M9BW uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W Reed auto switch Perpendicular to axis R xial : or double clevis, double side bossed and head flange, the port is located perpendicular to the cylinder axis. 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL Cylinder standard stroke Refer to s on page 48. Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. 5 m (Example) M9NW None N (Example) 7CN : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) 47 ow to Order Pivot bracket None Pivot bracket is shipped together N with the product, but not assembled. : Only for D (double clevis) : Pivot bracket is shipped together with the product, but not assembled. B Refer to page 48 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. : Refer to Ordering Example of Cylinder ssembly on page 48.

49 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy Ø 1: ±1.5, Ø : ±1 Can operate without lubrication. Symbol Double acting, Single rod, Rubber bumper Symbol (or details, refer to pages 111 to 12.) Ordering Example of Cylinder ssembly Cylinder model: CDJ2KD-6-NW-M9BW-B Double knuckle joint Specifications -X Change of rod end shape -XC3 Special port location -XC9 djustable stroke cylinder/djustable retraction type -XC1 Dual stroke cylinder/double rod type -XC22 luororubber seal -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Precautions Refer to page 121 before handling. uto switch Band mounting Double clevis Pivot bracket Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. Specifications Bore size 1 ction Double acting, Single rod luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.6 MPa mbient and fluid temperature s Bore size stroke 1 15, 3, 45, 6, 75, 1, 125, 15 15, 3, 45, 6, 75, 1, 125, 15, 175, 2 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfi ll the specifi cations due to the defl ection etc. Mounting Brackets/Part No. Mounting bracket 1: T-bracket is used with double clevis (D). Refer to pages 11 to 18 for cylinders with auto switches. Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Cushion Rubber bumper Lubrication Not required (Non-lube) length tolerance +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Option Bore size 1 oot CJ-LC CJK-LC lange CJ-C CJK-C T-bracket 1 CJ-T1C CJ-TC uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Mounting and ccessories/refer to page 22 for details about part numbers and dimensions. Mounted on the product. Can be ordered within the cylinder model. Mounting Basic oot lange Double 1 clevis Double clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint 1 Rod end cap (lat/round type) T-bracket 1: pin and retaining rings are shipped together with double clevis and double knuckle joint. 48 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

50 Series K Weights [g] Bore size 1 Basic Basic weight xial piping (When the stroke Double clevis (including clevis pin) is zero) ead-side bossed 29 5 dditional weight per 15 mm of stroke 4 7 Mounting bracket weight ccessories Single foot 8 25 Double foot 5 Rod fl ange 5 13 ead fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 : Mounting nut and rod end nut are included in the basic weight. : Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) KL1-45 Basic weight 25 (Ø 1) dditional weight 4/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) /15 x = 45 g Construction (Not able to disassemble) Rod section With auto switch Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy 8 Bumper Urethane No. Description Material Note 9 Rod seal R 1 Piston seal R 11 Tube gasket R 12 Wear ring Resin 13 Mounting nut Rolled steel 14 Rolled steel 15 Magnet 49

51 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Basic (B) KB 1 BB.3 B KE 1 BB.3 Ø NDh8 Section Y detail Ø NDh8 ead cover port location K Rod section K Y Y Section Y detail G Piping port 2 x M5 x.8 N S + + G Piping port 2 x M5 x.8 N S + + GB Piping port M5 x.8 ead cover port location xial location (R) : The overall cylinder length does not change. Refer to page 22 for details of the mounting nut. (SNJ-C for Ø 1, SNKJ-C for Ø ) Bore size B BB C CB G GB K N NDh8 S M4 x M1 x M5 x M12 x Double-side Bossed (E) Rod section GB YY B.3 B.3 Ø NDh8 B.3 Section YY detail Refer to page 22 for details of the mounting nut. (SNJ-C for Ø 1, SNKJ-C for Ø ) Bore size B C G GB K N NDh8 S M4 x M1 x M5 x M12 x B.3 5 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

52 Series K Double Clevis (D) KD 1 B G Piping port 2 x M5 x.8 GB D9 +.3 Clevis pin (Ø cdd9.3.6) BB.3 CX BB.3 N S U R K Rod section B.3 B.3 : clevis pin and retaining rings are included. Bore size B BB C CB CD(cd) CX G GB K N R S U M4 x M5 x Single oot (L) KL 1 ead cover port location View E G Piping port 2 x M5 x.8 GB 2 x Ø LC Mounting hole Cover surface BB.3 B BB.3 LT X Y N S + + K Rod section B.3 Piping port M5 x.8 B.3 View E LX L L LB LY ead cover port location xial location (R) : The overall cylinder length does not change. Refer to page 22 for details of the mounting nut. (SNJ-C for Ø 1, SNKJ-C for Ø ) Bore size B BB C CB G GB K LB LC L LT LX LY L N S X Y M4 x M1 x M5 x M12 x

53 ir Cylinder: Non-rotating Rod Type Double cting, Single Rod Series K Double oot (M) KM 1 B K 1 BB.3 LT X G Y N Piping port 2 x M5 x.8 S + LS + + View E G Piping port 2 x M5 x.8 BB.3 ead cover port location T N S + + GB Y GB LT X Piping port M5 x.8 K B.3 K B.3 LX L 4 x Ø LC Mounting hole Cover surface X L LB LY Refer to page 22 for details of the mounting nut. (SNJ-C for Ø 1, SNKJ-C for Ø ) Bore size G GB K LB LC L LS LT LX LY L N S X Y M4 x M1 x M5 x M12 x Rod lange () Rod section Rod section ead cover port location xial location (R) : The overall cylinder length does not change. View E 2 x Ø C Mounting hole Cover surface Refer to page 22 for details of the mounting nut. (SNJ-C for Ø 1, SNKJ-C for Ø ) Bore size B BB C CB B C T X Y G GB K N S M4 x M1 x M5 x M12 x B Y Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch 52

54 Series K ead lange (G) KG 1 Cover surface G Piping port 2 x M5 x.8 GB B Y B.3 X 2 x Ø C Mounting hole N S + + T K Rod section B.3 Refer to page 22 for details of the mounting nut. (SNJ-C for Ø 1, SNKJ-C for Ø ) Bore size B C B C T X Y G GB K N S M4 x M1 x M5 x M12 x

55 With auto switch (Built-in magnet) Mounting B Basic E Double-side bossed D Double clevis L Single foot M Double foot Rod fl ange G ead fl ange ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Ø 1, Ø Cylinder standard stroke Refer to s on page 55. K B CDJ2K 45 With auto switch B 45 ead cover port location Perpendicular to axis R Bore size 1 1 mm mm : oot/lange brackets are shipped together with the product, but not assembled. xial : or double clevis, double side bossed and head fl ange, the port is located perpendicular to the cylinder axis. : Not applicable to single acting, spring extend (T). S S ction S Single acting, Spring returnrn T Single acting, Spring extend Pivot bracket None Pivot bracket is shipped together N with the product, but not assembled. : Only for D (double clevis) : Pivot bracket is shipped together with the product, but not assembled. Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) M9BW uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a builtin magnet cylinder without an auto switch is required. : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Solid state auto switch Indicator light B RoS Refer to page 55 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. : Refer to Ordering Example of Cylinder ssembly on page 55. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) DC C connector load ( ) (M) (L) () None Perpendicular In-line Perpendicular In-line (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W Reed auto switch 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL ow to Order 5 m (Example) M9NW None N (Example) 7CN : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) 54 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

56 Series K cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy Ø 1: ±1.5, Ø : ±1 Can operate without lubrication. Spring extend Spring return Specifications Bore size 1 ction Single acting, Spring return/single acting, Spring extend luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.15 MPa mbient and fluid temperature Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Cushion Rubber bumper (standard equipment) Lubrication Not required (Non-lube) length tolerance +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Symbol Single acting, Spring return, Rubber bumper Symbol Single acting, Spring extend, Rubber bumper (or details, refer to pages 111 to 12.) Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease s Bore size 1 15, 3, 45, 6 stroke 15, 3, 45, 6, 75, 1, 125, 15 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfill the specifi cations due to the defl ection etc. Spring Reaction orce Spring with primary mounting load IN Bore size Spring reaction force [N] Primary Secondary When the spring is set in the cylinder Spring with secondary mounting load OUT When the spring is contracted by applying air Precautions Refer to page 121 before handling. Ordering Example of Cylinder ssembly Cylinder model: CDJ2KD-45S-NW-M9BW-B uto switch Band mounting Double knuckle joint Double clevis Pivot bracket Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. Mounting and ccessories/refer to page 22 for details about part numbers and dimensions. Option Mounted on the product. Can be ordered within the cylinder model. Mounting Basic oot lange Double 1 Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint 1 Rod end cap (lat/round type) T-bracket 1: pin and retaining rings are shipped together with double clevis and double knuckle joint. Mounting Brackets/Part No. Bore size Mounting bracket 1 oot CJ-LC CJK-LC lange CJ-C CJK-C T-bracket 1 CJ-T1C CJ-TC 1: T-bracket is used with double clevis (D). Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 55

57 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Weights Spring Return Basic weight Mounting bracket weight ccessories Bore size 1 Mounting Basic xial piping Double clevis (including clevis pin) eadside Basic bossed xial piping Double clevis (including clevis pin) eadside bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot 8 25 Double foot 5 Rod fl ange 5 13 ead fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 : Mounting nut and rod end nut are included in the basic weight. : Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) KL1-45S Basic weight 48 (Ø 1) Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) = 56 g [g] Spring Extend Bore size 1 Basic weight Mounting bracket weight ccessories Mounting Basic xial piping Double clevis (including clevis pin) eadside Basic bossed xial piping Double clevis (including clevis pin) [g] eadside bossed 15 stroke stroke stroke stroke stroke stroke stroke stroke Single foot 8 25 Double foot 5 Rod fl ange 5 13 ead fl ange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 : Mounting nut and rod end nut are included in the basic weight. : Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) KL1-45T Basic weight 44 (Ø 1) Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) = 52 g Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 56

58 Series K Construction (Not able to disassemble) Single acting, Spring return Rod section With auto switch Single acting, Spring extend Rod section With auto switch Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy 8 Bumper Urethane 9 Piston seal R No. Description Material Note 1 Tube gasket R 11 Wear ring Resin 12 Return spring Piano wire 13 Spring seat luminium alloy 14 Mounting nut Rolled steel 15 Rolled steel Magnet 17 Rod seal R 57

59 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Return: Basic (B) KB BB.3 KE 1 BB.3 1 BB.3 BB.3 B Ø NDh8 B S S ead cover port location Ø NDh8 Section Y detail Y Piping port M5 x.8 GB N S + + Y N + S + ead cover port location xial location (R) : The overall cylinder length does not change. GB Piping port M5 x.8 Piping port M5 x.8 YY K Rod section or details of the mounting nut, refer to page 22. S Bore B BB C CB GB K N NDh8 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x Single cting, Spring Return: Double-side Bossed (E) Section Y detail K Rod section B.3 B.3 Ø NDh8 B.3 Section YY detail B.3 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 or details of the mounting nut, refer to page 22. S Bore B BB C CB GB K N NDh8 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x uto Switch

60 Series K Single cting, Spring Return: Double Clevis (D) KD 1 S B Piping port M5 x.8 GB D9 +.3 Clevis pin (Ø cdd9.3.6) BB.3 B.3 BB.3 CX N S U R K Rod section B.3 : clevis pin and retaining rings are included. S Bore size B BB C CB CD CX GB K N R U 5 to to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Bore size 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 11 to 126 to 1 st 125 st 15 st Single cting, Spring Return: Single oot (L) KL 1 S ead cover port location Piping port M5 x.8 ead cover port location xial location (R) : The overall cylinder length does not change. 2 x Ø LC Mounting hole B View E GB Piping port M5 x.8 Cover surface BB.3 K B.3 L LB LY BB.3 LT X Y N + S + Rod section B.3 View E LX L or details of the mounting nut, refer to page 22. Bore size B BB C CB GB K LB LC L LT LX LY L N M4 x M1 x M5 x M12 x 1. S Bore 5 to to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st

61 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Return: Double oot (M) KM 1 K BB.3 B 1 LT BB.3 X Y N Y X S + LS + + S or details of the mounting nut, refer to page 22. S View E T N GB Piping port M5 x.8 ead cover port location S + + Piping port M5 x.8 GB LT Piping port M5 x.8 K K Rod section B.3 Cover surface B.3 LX L X 4 x Ø LC Mounting hole L LB LY LS Bore GB LB LC L 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st LT LX LY L K N M4 x M1 x M5 x M12 x 1. S Bore 5 to to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st Single cting, Spring Return: Rod lange () Rod section ead cover port location xial location (R) : The overall cylinder length does not change. View E 2 x Ø C Mounting hole Cover surface or details of the mounting nut, refer to page 22. S Bore size B BB C CB B C T X Y GB K N 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x B Y 6 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

62 Series K Single cting, Spring Return: ead lange (G) KG 1 S Cover surface GB Piping port M5 x.8 B Y B.3 X 2 x Ø C Mounting hole N S + + T K Rod section B.3 or details of the mounting nut, refer to page 22. Bore size B C B C T X Y GB K N M4 x M1 x M5 x M12 x 1. S Bore 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st

63 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Extend: Basic (B) KB 1 BB.3 B KE 1 BB.3 B Ø NDh8 BB.3 Ø NDh8 BB.3 T Section Y detail T + + Y G N Piping port M5 x x Y G Piping port M5 x.8 N + 2 x S + S + Ø NDh8 YY K Rod section or details of the mounting nut, refer to page 22. S Bore BBBCCB G K N NDh8 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x Single cting, Spring Extend: Double-side Bossed (E) Section Y detail Section YY detail K Rod section B.3 B.3 B.3 B.3 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 or details of the mounting nut, refer to page 22. S Bore BBBCCB G K N NDh8 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 5 to to 31 to 46 to 61 to 76 to 11 to 126 to size 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x uto Switch

64 Series K Single cting, Spring Extend: Double Clevis (D) KD 1 T G Piping port M5 x.8 D9 +.3 Clevis pin (Ø cdd9.3.6) BB.3 B CX BB.3 + N + 2 x + 2 x S + U R K Rod section B.3 B.3 clevis pin and retaining rings are included. S Bore size B BB C CB CD CX G K N R U 5 to to 31 to 46 to 61 to 76 to 11 to 126 to (cd) 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M5 x Bore size 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st to 15 st Single cting, Spring Extend: Single oot (L) KL 1 T 2 x Ø LC Mounting hole View E G Piping port M5 x.8 Cover surface BB.3 B BB.3 + LT X Y N + 2 x S + K B.3 Rod section B.3 View E LX L L LB LY or details of the mounting nut, refer to page 22. Bore size B BB C CB G K LB LC L LT LX LY L N M4 x M1 x M5 x M12 x 1. Bore size S X Y 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st

65 ir Cylinder: Non-rotating Rod Type Single cting, Spring Return/Extend Series K Single cting, Spring Extend: Double oot (M) KM 1 BB.3 B K 1 BB.3 + LT T X T G Y + N Piping port M5 x x View E G T N S + LS + Piping port M5 x x S + Y LT X K K Rod section B.3 B.3 Cover surface LX L 2 x Ø C Mounting hole X 4 x Ø LC Mounting hole L LB LY or details of the mounting nut, refer to page 22. LS Bore size G K LB LC L 5 to to 31 to 46 to 61 to 76 to 11 to 126 to LT LX LY L N 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st M4 x M1 x M5 x M12 x 1. S Bore size 5 to to 31 to 46 to 61 to 76 to 11 to 126 to X Y 5 to to 31 to 46 to 61 to 76 to 11 to 126 to 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st 15 st 3 st 45 st 6 st 75 st 1 st 125 st 15 st Single cting, Spring Extend: Rod lange () Rod section View E Cover surface B Y Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK or details of the mounting nut, refer to page 22. Bore size B BB C CB B C T X Y G K N M4 x M1 x M5 x M12 x 1. Bore size S 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st With End Lock CBJ2 uto Switch

66 Series K Single cting, Spring Extend: ead lange (G) KG 1 T Cover surface G Piping port M5 x.8 B Y B.3 X 2 x Ø C Mounting hole + N + 2 x S + T K Rod section B.3 or details of the mounting nut, refer to page 22. Bore size B C B C T X Y G K N M4 x M1 x M5 x M12 x 1. Bore size S 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st

67 With auto switch With auto switch (Built-in magnet) ead cover port location Perpendicular to axis R xial ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series Ø 1, Ø pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Solid state auto switch Indicator light RoS Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired Band mounting Rail mounting None pplicable load entry (Output) DC C connector Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V, 12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V, 12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V, 12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V, 12 V 7N 79 IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit (NPN equivalent) Yes Grommet 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W Reed auto switch B E D L M G Mounting Basic Double-side bossed Double clevis Single foot Double foot Rod fl ange ead fl ange CDJ2 Bore size 1 1 mm mm B B : oot/lange brackets are shipped together with the product, but not assembled. : or double clevis, double side bossed and head flange, the port is located perpendicular to the cylinder axis. 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL ow to Order 6 6 Cylinder standard stroke Refer to s on page m (Example) M9NW None N (Example) 7CN M9BW : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) Pivot bracket None Pivot bracket is shipped together N with the product, but not assembled. : Only for D (double clevis) : Pivot bracket is shipped together with the product, but not assembled. Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. B Refer to page 67 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. : Refer to Ordering Example of Cylinder ssembly on page Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

68 Series Space-saving air cylinder with speed controller built-in cylinder cover Specifications Bore size 1 ction Double acting, Single rod luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.6 MPa mbient and fluid temperature Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Cushion Rubber bumper Lubrication Not required (Non-lube) length tolerance +1. Speed controller Built-in Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Symbol Double acting, Single rod, Rubber bumper (or details, refer to pages 111 to 12.) Symbol Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Refer to page 121 before handling. Ordering Example of Cylinder ssembly Cylinder model: CDJ2D-6-NW-M9BW-B Double knuckle joint Precautions Double clevis s Bore size stroke Maximum manufacturable stroke 1 15, 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 4 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfill the specifi cations due to the defl ection etc. Mounting and ccessories/refer to page 22 for details about part numbers and dimensions. Option Mounted on the product. Can be ordered within the cylinder model. Mounting Basic oot lange Double 1 Double clevis clevis (including T-bracket) Mounting nut Clevis pin Single knuckle joint Double knuckle joint 1 Rod end cap (lat/round type) T-bracket 1: pin and retaining rings are shipped together with double clevis and double knuckle joint. Mounting Brackets/Part No. Mounting bracket 1: T-bracket is used with double clevis (D). Bore size 1 oot CJ-L1C CJ-LC lange CJ-1C CJ-C T-bracket 1 CJ-T1C CJ-TC uto switch Band mounting Pivot bracket Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 67 : Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled.

69 ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series Weights Bore size 1 Basic Basic weight xial piping (When the stroke Double clevis (including clevis pin) 4 68 is zero) ead-side bossed dditional weight per 15 mm of stroke 4 7 Mounting bracket weight ccessories Single foot 8 25 Double foot 5 Rod flange 5 13 ead flange 5 13 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 T-bracket 32 5 : Mounting nut and rod end nut are included in the basic weight. : Mounting nut is not included in the basic weight for the double clevis. Calculation: Example) L1-45 Basic weight 36 (Ø 1) dditional weight 4/15 stroke Cylinder stroke 45 stroke Mounting bracket weight 8 (Single foot) /15 x = 56 g Construction (Not able to disassemble)!8!!2 r!1!4 q!5!7 e o!3 w Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy 8 Bumper Urethane 9 Bumper B Urethane 1 Speed controller needle Carbon steel 11 Mounting nut Rolled steel [g] t With auto switch No. Description Material Note 12 Rolled steel 13 Piston seal R 14 Rod seal R 15 Check seal R Check seal B R 17 Tube gasket R 18 Needle seal R 19 Wear ring Resin 2 Check seal sleeve luminium alloy 21 Retaining ring Carbon tool steel 22 Magnet With End Lock Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK CBJ2 uto Switch 68

70 Series Basic (B) B 1 ead cover port location Y G Piping port 2 x M5 x.8 GB WW Piping port M5 x.8 Y G WW B.3 B.3 B.3 B.3 Ø NDh8 N S + + B.3 ead cover port location xial location (R) : The overall cylinder length does not change. W WB Section Y detail or details of the mounting nut, refer to page 22. Bore size B C D G GB N NDh8 W WB WW S M4 x M8 x M5 x M1 x Double-side Bossed (E) E 1 Piping port 2 x M5 x.8 GB YY Ø NDh8 Ø NDh8 N S + + B.3 Ø NDh8 W WB Section Y detail Section YY detail or details of the mounting nut, refer to page 22. Bore size B C D G GB N NDh8 W WB WW S M4 x M8 x M5 x M1 x

71 ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series Double Clevis (D) D 1 C.3 L 1 B.3 WW B.3 C.3 CX LT X G Y N G N W Piping port 2 x M5 x.8 ead cover port location Piping port 2 x M5 x.8 S S + + GB GB U WB R D Clevis pin (dd9.6 ) : clevis pin and retaining rings are included. Bore size B C CD CX C D G GB N R U W WB WW S M4 x M5 x Single oot (L) LX L B.3 Cover surface B.3 WW 2 x Ø LC Mounting hole L LB LY Piping port M5 x.8 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK W WB ead cover port location xial location (R) : The overall cylinder length does not change. With End Lock CBJ2 or details of the mounting nut, refer to page 22. Bore size B C D G GB LB LC L LT LX LY L N W WB WW S X Y M4 x M8 x M5 x M1 x uto Switch

72 Series Double oot (M) M 1 4 x Ø LC Mounting hole WW G Piping port 2 x M5 x.8 GB Cover surface B.3 L LB LY B.3 LT X Y N Y LT X LX L S + LS + + W WB or details of the mounting nut, refer to page 22. Bore size B C D G GB LB LC L LS LT LX LY L N W WB WW S X Y M4 x M8 x M5 x M1 x Rod lange () 1 ead cover port location WW G Piping port 2 x M5 x.8 GB 2 x Ø C Mounting hole Cover surface Piping port M5 x.8 B.3 B Y B.3 T N S + + X ead cover port location xial location (R) : The overall cylinder length does not change. W WB or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y G GB N W WB WW S M4 x M8 x M5 x M1 x

73 ir Cylinder: Built-in Speed Controller Type Double cting, Single Rod Series ead lange (G) G 1 X Cover surface B Y 2 x Ø C Mounting hole G W Piping port 2 x M5 x.8 N T S + + GB WB or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y G GB N W WB WW S M4 x M8 x M5 x M1 x B.3 B.3 WW Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 72

74 ir Cylinder: Built-in Speed Controller Type Double cting, Double Rod Series W Ø 1, Ø RoS ow to Order W B 6 With auto switch CDJ2W L 6 M9BW B With auto switch (Built-in magnet) Mounting B Basic L oot lange : oot/lange brackets are shipped together with the product, but not assembled. Bore size 1 1 mm mm Cylinder standard stroke Refer to s on page 74. uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. Refer to page 74 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting entry (Output) None DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit Solid state auto switch Indicator light 3-wire 5 V (NPN equivalent) 96V 96 96V 96 IC circuit Yes 2 V Grommet 1 V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) 7CN Reed auto switch : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) 73

75 ir Cylinder: Built-in Speed Controller Type Double cting, Double Rod Series W Space-saving air cylinder with speed controller built-in cylinder cover Symbol Double acting, Double rod, Rubber bumper (or details, refer to pages 111 and 12.) Symbol Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Precautions Refer to page 121 before handling. Specifications Bore size 1 ction luid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication length tolerance Double acting, Double rod ir 1 MPa.7 MPa.1 MPa Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Rubber bumper Not required (Non-lube) +1. Speed controller Built-in Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J s Bore size stroke 1 15, 3, 45, 6, 75, 1, 125, 15 15, 3, 45, 6, 75, 1, 125, 15, 175, 2 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfill the specifi cations due to the defl ection etc. Mounting and ccessories /Refer to page 22 for details about part numbers and dimensions. Mounting Basic oot lange Mounting nut Option Single knuckle joint Double knuckle joint 1 1: knuckle pin and retaining rings are shipped together with double knuckle joint. Mounting Brackets/Part No. Mounting bracket Bore size 1 oot CJ-L1C CJ-LC lange CJ-1C CJ-C Refer to pages 11 to 18 for cylinders with auto switches. Mounted on the product. Please order separately. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch 74

76 Series W Weights Bore size 1 Basic weight (When the stroke is zero) Basic dditional weight per 15 mm of stroke Mounting bracket Double foot 5 weight ead fl ange 5 13 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 : Mounting nut and rod end nut are included in the basic weight. Calculation: Example) WL1-45 Basic weight 36 (Ø 1) dditional weight 4.5/15 stroke Cylinder stroke 45 stroke Mounting bracket weight (Double foot) /15 x 45 + = 65.5 g [g] Construction (Not able to disassemble)!5 i! e o!2 q!3!4 w u!1 y t!6 r With auto switch Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 Cylinder tube Stainless steel 3 Piston rod Stainless steel 4 Piston luminium alloy 5 Piston B luminium alloy 6 Piston luminium alloy 7 Bumper Urethane 8 Speed controller needle Carbon steel No. Description Material Note 9 Mounting nut Rolled steel 1 Rolled steel 11 Piston seal R 12 Rod seal R 13 Check seal R 14 Tube gasket R 15 Needle seal R Magnet 75

77 ir Cylinder: Built-in Speed Controller Type Double cting, Double Rod Series W Basic (B) WB 1 Ø NDh8 Section Y detail B.3 WW B.3 LT X Y W G Piping port 2 x M5 x.8 N N S x or details of the mounting nut, refer to page 22. Bore size B C D G N NDh8 W WW S M4 x M8 x M5 x M1 x oot (L) WL 1 G Y N Piping port 2 x M5 x.8 S x N G Y W G LT X + B.3 LX L 4 x Ø LC Mounting hole Cover surface B.3 WW L LB LY Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK With End Lock RK CBJ2 W or details of the mounting nut, refer to page 22. Bore size B C D G LB LC L LT LX LY L N W WW S X Y M4 x.7 21 M8 x M5 x.8 21 M1 x W uto Switch

78 Series W lange () W 1 WW G Piping port 2 x M5 x.8 G 2 x Ø C Mounting hole Cover surface B.3 B Y B.3 T N S x N + X W W or details of the mounting nut, refer to page 22. Bore size B C D B C T X Y G N W WW S M4 x.7 21 M8 x M5 x.8 21 M1 x

79 ir Cylinder: Direct Mount Type Double cting, Single Rod Series R Ø 1, Ø Perpendicular to axis R xial pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Solid state auto switch Indicator light 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW RoS Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V, 12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V, 12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V, 12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V, 12 V 7N 79 IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W Reed auto switch With auto switch With auto switch (Built-in magnet) Cylinder standard stroke Refer to s on page 79. R CDJ2R Mounting Bottom mounting Bore size 1 1 mm mm ead cover port location ow to Order 6 6 M9BW : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, rrefer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. B Refer to page 79 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. : Refer to Ordering Example of Cylinder ssembly on page Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

80 Series R The R direct mount cylinder can be installed directly through the use of a square rod cover. Specifications Bore size 1 ction Double acting, Single rod luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.6 MPa mbient and fluid temperature Cushion Lubrication length tolerance Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Rubber bumper Not required (Non-lube) +1. Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Symbol Double acting, Single rod, Rubber bumper (or details, refer to pages 111 to 12.) Symbol Specifi cations -X Change of rod end shape -XC9 djustable stroke cylinder/djustable retraction type -XC22 luororubber seal -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Refer to page 121 before handling. Ordering Example of Cylinder ssembly Cylinder model: CDJ2R-6-W-M9BW-B Double knuckle joint Precautions uto switch Band mounting Mounting : Bottom mounting Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Double knuckle joint and auto switch are shipped together with the product, but not assembled. s Bore size stroke Maximum manufacturable stroke 1 15, 3, 45, 6, 75, 1, 125, , 3, 45, 6, 75, 1, 125, 15, 175, 2 4 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfi ll the specifi cations due to the defl ection etc. ccessories/refer to page 22 for details about part numbers and dimensions. Option 2 Single knuckle joint, Double knuckle joint 1, Rod end cap (lat/round type) 1: knuckle pin and retaining rings are shipped together with double knuckle joint. 2: Can be ordered within the cylinder model. Weights Bore size 1 Basic weight Basic (When the stroke is zero) xial piping dditional weight per 15 mm of stroke 4 7 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 : Mounting nut and rod end nut are included in the basic weight. Calculation: Example) R1-45 Basic weight 36 (Ø 1) dditional weight 4/15 stroke Cylinder stroke 45 stroke /15 x 45 = 48 g Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. [g] 79

81 ir Cylinder: Direct Mount Type Double cting, Single Rod Series R Clean Series 1-R 1 Clean Series ir cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator s rod section having a double seal construction. or the detailed specifi cations, refer to the catalogue on Construction (Not able to disassemble) ead cover port location Specifications ction Double acting, Single rod Bore size 1, Maximum operating pressure.7 MPa Minimum operating pressure.8 MPa Cushion Rubber bumper stroke Same as standard type. (Refer to page 79.) uto switch Mountable (Band mounting) Mounting Bottom mounting Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 8

82 Series R Construction (Not able to disassemble)!3 o q!1 e r! u!2 i w y!4 t With auto switch Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy No. Description Material Note 8 Bumper Urethane 9 Rod seal R 1 Piston seal R 11 Tube gasket R 12 Wear ring Resin 13 Rolled steel 14 Magnet Bottom Mounting R 1 ead cover port location G Y X Piping port 2 x M5 x.8 GB 2 x Ø LD Piping port B.3 LX L B.3 ead cover shape N S + + L LB ead cover port location xial location (R) : The overall cylinder length does not change. Bore size B C D G GB L LB LD L LX N X Y S Ø 3.5 through, Ø 6.5 counterbore depth M4 x Ø 4.5 through, Ø 8 counterbore depth 5 1 M5 x

83 With auto switch Solid state auto switch With auto switch (Built-in magnet) ir Cylinder: Direct Mount Type Single cting, Spring Return/Extend Series R Ø 1, Ø Cylinder standard stroke Refer to s on page 83. R 45 CDJ2R Mounting Bottom mounting Indicator light Perpendicular to axis R xial Bore size 1 1 mm mm ead cover port location : Not applicable to single acting, spring extend (T). 45 S S ction S Single acting, Spring return T Single acting, Spring extend pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. M9BW 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) 7CN B RoS Refer to page 83 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W Reed auto switch ow to Order uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. : Refer to Ordering Example of Cylinder ssembly on page 83. : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) 82 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

84 Series R The R direct mount cylinder can be installed directly through the use of a square rod cover. Symbol Single acting, Spring return, Rubber bumper Single acting, Spring extend, Rubber bumper (or details, refer to pages 111 to 12.) Symbol Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Precautions Refer to page 121 before handling. Specifications Bore size 1 ction Single acting, Spring return/single acting, Spring extend luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.15 MPa mbient and fluid temperature Cushion Lubrication length tolerance Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Rubber bumper Not required (Non-lube) +1. Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J s Bore size 1 15, 3, 45, 6 stroke 15, 3, 45, 6, 75, 1, 125, 15 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confi rmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfill the specifi cations due to the defl ection etc. ccessories /Refer to page 22 for details about part numbers and dimensions. Option 2 Single knuckle joint, Double knuckle joint 1 Rod end cap (lat type, Round type) 1: knuckle pin and retaining rings are shipped together with double knuckle joint. 2: Can be ordered within the cylinder model. Ordering Example of Cylinder ssembly Spring Reaction orce Cylinder model: CDJ2R-45S-W-M9BW-B uto switch Band mounting Spring with primary mounting load IN Bore size Spring reaction force [N] Primary Secondary Spring with secondary mounting load OUT When the spring is set in the cylinder When the spring is contracted by applying air Double knuckle joint Mounting : Bottom mounting Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Double knuckle joint and auto switch are shipped together with the product, but not assembled. Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 83

85 ir Cylinder: Direct Mount Type Single cting, Spring Return/Extend Series R Weights Spring Return Bore size 1 Mounting Basic xial Basic xial 15 stroke stroke stroke Basic 6 stroke weight 75 stroke stroke stroke stroke Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 : is included in the basic weight. Construction (Not able to disassemble) Single acting, Spring return Single acting, Spring extend Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy 8 Bumper Urethane [g] Spring Extend Bore size 1 Mounting Basic Basic 15 stroke stroke stroke Basic 6 stroke weight 75 stroke stroke stroke stroke 228 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 With auto switch With auto switch No. Description Material Note 9 Piston seal R 1 Tube gasket R 11 Wear ring Resin 12 Return spring Piano wire 13 Spring seat luminium alloy 14 Rolled steel 15 Magnet Rod seal R [g] With End Lock Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK CBJ2 uto Switch 84

86 Series R Single cting: Bottom Mounting Spring return: R 1 S ead cover port location X Y Breather hole Piping port M5 x.8 GB 2 x Ø LD Piping port B.3 LX L B.3 ead cover shape N S + + L LB ead cover port location xial location (R) : The overall cylinder length does not change. Bore size B C D GB L LB LD L LX N X Y Ø 3.5 through, Ø 6.5 counterbore depth M4 x Ø 4.5 through, Ø 8 counterbore depth 5 1 M5 x Dimensions by : Spring Return Bore size S 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st Spring extend: R 1 T X + G Y Piping port M5 x.8 Breather hole B.3 LX L B.3 ead cover shape + N + 2 x S + L LB 2 x Ø LD Bore size B C D G L LB LD L LX N X Y Ø 3.5 through, Ø 6.5 counterbore depth M4 x Ø 4.5 through, Ø 8 counterbore depth 5 1 M5 x Dimensions by : Spring Extend Bore size S 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st 5 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st

87 With auto switch ir Cylinder: Direct Mount, Non-rotating Rod Type Double cting, Single Rod Series RK Ø 1, Ø Perpendicular to axis R xial pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Solid state auto switch Indicator light 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) 7CN RoS Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit Reed auto switch With auto switch (Built-in magnet) Cylinder standard stroke Refer to s on page 87. RK CDJ2RK Mounting Bottom mounting Bore size 1 1 mm mm ead cover port location ow to Order 6 6 M9BW 3-wire Grommet Yes (NPN equivalent) 5 V 96V 96 96V 96 IC circuit 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. B Refer to page 87 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. : Refer to Ordering Example of Cylinder ssembly on page Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

88 Series RK cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy Ø 1: ±1.5, Ø : ±1 Specifications Bore size 1 ction Double acting, Single rod luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.6 MPa mbient and fluid temperature Without auto switch: 1 C to 7 C (No freezing) With auto switch: 1 C to 6 C Cushion Rubber bumper Lubrication Not required (Non-lube) length tolerance +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J Symbol Double acting, Single rod, Rubber bumper (or details, refer to pages 111 to 12.) Symbol Specifi cations -X Change of rod end shape -XC9 djustable stroke cylinder/djustable retraction type -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Precautions Refer to page 121 before handling. s Bore size stroke 1 15, 3, 45, 6, 75, 1, 125, 15 15, 3, 45, 6, 75, 1, 125, 15, 175, 2 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfi ll the specifi cations due to the defl ection etc. ccessories/refer to page 22 for details about part numbers and dimensions. Option 2 Single knuckle joint, Double knuckle joint 1 Rod end cap (lat/round type) 1: knuckle pin and retaining rings are shipped together with double knuckle joint. 2: Can be ordered within the cylinder model. Ordering Example of Cylinder ssembly Cylinder model: CDJ2RK-6-W-M9BW-B Double knuckle joint uto switch Band mounting Weights Bore size 1 Basic weight Basic (When the stroke is zero) xial piping dditional weight per 15 mm of stroke 4 7 Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 : is included in the basic weight. Calculation: Example) RK1-45 Basic weight 36 (Ø 1) dditional weight 4/15 stroke Cylinder stroke 45 stroke /15 x 45 = 48 g [g] Mounting : Bottom mounting Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Double knuckle joint and auto switch are shipped together with the product, but not assembled. Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 87

89 ir Cylinder: Direct Mount, Non-rotating Rod Type Double cting, Single Rod Series RK Construction (Not able to disassemble) Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy RK 1 B.3 Rod section Bottom Mounting B.3 ead cover shape!3 o q!1 e r i! u!2 w ead cover port location K Rod section X G Y N Piping port 2 x M5 x.8 S + + GB Piping port y L LB!4 t With auto switch No. Description Material Note 8 Bumper Urethane 9 Rod seal R 1 Piston seal R 11 Tube gasket R 12 Wear ring Resin 13 Rolled steel 14 Magnet LX L 2 x Ø LD Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK ead cover port location xial location (R) : The overall cylinder length does not change. Bore size B C G GB K L LB LD L LX N X Y S Ø 3.5 through, Ø 6.5 counterbore depth M4 x Ø 4.5 through, Ø 8 counterbore depth 5 1 M5 x With End Lock CBJ2 uto Switch

90 ir Cylinder: Direct Mount, Non-rotating Rod Type Single cting, Spring Return/Extend Series RK Ø 1, Ø RoS ow to Order Cylinder standard stroke Refer to s on page 9. ction S Single acting, Spring return T Single acting, Spring extend With auto switch Solid state auto switch RK CDJ2RK Indicator light pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. S S M9BW Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired pplicable Band mounting Rail mounting None entry (Output) DC C connector load Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W Reed auto switch With auto switch (Built-in magnet) Mounting Bottom mounting Bore size 1 1 mm mm ead cover port location Perpendicular to axis 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m (Example) M9NW None N (Example) 7CN R xial : Not applicable to single acting, spring extend (T). Rod end bracket None V Single knuckle joint W Double knuckle joint T Rod end cap (lat type) U Rod end cap (Round type) : Rod end bracket is shipped together with the product, but not assembled. : knuckle joint pin is not provided with the single knuckle joint. : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (or band mounting, only auto switch mounting brackets are assembled before being shipped.) 89 uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. B Refer to page 9 for details. uto switch mounting type Rail mounting B Band mounting : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. Number of auto switches 2 pcs. S 1 pc. n n pcs. : Refer to Ordering Example of Cylinder ssembly on page 9. : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on

91 ir Cylinder: Direct Mount, Non-rotating Rod Type Single cting, Spring Return/Extend Series RK cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy Ø 1: ±1.5, Ø : ±1 Can operate without lubrication. Symbol Single acting, Spring return, Rubber bumper Symbol Specifi cations -X Change of rod end shape -XC51 With hose nipple -XC85 Grease for food processing equipment -X446 PTE grease Precautions Refer to page 121 before handling. Ordering Example of Cylinder ssembly Cylinder model: CDJ2RK-45S-W-M9BW-B uto switch Band mounting Double knuckle joint Single acting, Spring extend, Rubber bumper (or details, refer to pages 111 to 12.) Specifications IN Bore size 1 ction luid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion Lubrication length tolerance OUT Single acting, Spring return/single acting, Spring extend ir 1 MPa.7 MPa.15 MPa Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Rubber bumper Not required (Non-lube) +1. Rod non-rotating accuracy ±1.5 ±1 Piston speed 5 to 75 mm/s llowable kinetic energy.35 J.9 J s Bore size 1 15, 3, 45, 6 stroke 15, 3, 45, 6, 75, 1, 125, 15 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : Please consult with SMC for strokes which exceed the standard stroke length. : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfi ll the specifi cations due to the defl ection etc. ccessories/refer to page 22 for details about part numbers and dimensions. Option 2 Single knuckle joint, Double knuckle joint 1 Rod end cap (lat/round type) 1: knuckle pin and retaining rings are shipped together with double knuckle joint. 2: Can be ordered within the cylinder model. Spring Reaction orce Bore size Spring reaction force [N] Primary Secondary Spring with primary mounting load When the spring is set in the cylinder Spring with secondary mounting load When the spring is contracted by applying air Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 Mounting : Bottom mounting Rod end bracket W: Double knuckle joint uto switch D-M9BW: 2 pcs. uto switch mounting B: Band mounting : Double knuckle joint and auto switch are shipped together with the product, but not assembled. Refer to pages 11 to 18 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 9 uto Switch

92 Series RK Weights Spring Return Bore size 1 [g] Spring Extend Bore size 1 [g] Mounting Basic xial Basic xial 15 stroke stroke stroke Basic 6 stroke weight 75 stroke stroke stroke stroke Single knuckle joint Double knuckle joint ccessories (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 : is included in the basic weight. Basic weight ccessories Mounting Basic Basic 15 stroke stroke stroke stroke stroke stroke stroke stroke 234 Single knuckle joint Double knuckle joint (including knuckle pin) Rod end cap (lat type) 1 2 Rod end cap (Round type) 1 2 Construction (Not able to disassemble) Single acting, Spring return Rod section With auto switch Single acting, Spring extend Rod section With auto switch Component Parts No. Description Material Note 1 Rod cover luminium alloy 2 ead cover luminium alloy 3 Cylinder tube Stainless steel 4 Piston rod Stainless steel 5 Piston luminium alloy 6 Piston B luminium alloy 7 Piston luminium alloy 8 Bumper Urethane No. Description Material Note 9 Piston seal R 1 Tube gasket R 11 Wear ring Resin 12 Return spring Piano wire 13 Spring seat luminium alloy 14 Rolled steel 15 Magnet Rod seal R 91

93 ir Cylinder: Direct Mount, Non-rotating Rod Type Single cting, Spring Return/Extend Series RK Single cting: Bottom Mounting Spring return: RK 1 ead cover port location S B.3 B.3 B.3 K Rod section ead cover shape Spring extend: RK 1 X Y Breather hole GB N S + + T X + G Y Piping port M5 x.8 Piping port M5 x.8 L LB 2 x LD LX L Dimensions by : Spring Return Bore size S 5 to 15 to 3 31 to to 6 61 to to 1 11 to to 15 5 to 15 to 3 31 to to 6 61 to to 1 11 to to Breather hole Piping port ead cover port location xial location (R) : The overall cylinder length does not change. Bore size B C GB K L LB LD L LX N X Y Ø 3.5 through, Ø 6.5 counterbore depth M4 x Ø 4.5 through, Ø 8 counterbore depth 5 1 M5 x K N L 2 x LD B.3 Rod section + S + LB + 2 x ead cover shape Bore size B C G K L LB LD L LX N X Y Ø 3.5 through, Ø 6.5 counterbore depth M4 x Ø 4.5 through, Ø 8 counterbore depth 5 1 M5 x Dimensions by : Spring Extend (Dimensions not mentioned in the below table are the same as the above table.) Bore size S 5 to 15 to 3 31 to to 6 61 to to 1 11 to to 15 5 to 15 to 3 31 to to 6 61 to to 1 11 to to LX L Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch 92

94 ir Cylinder: With End Lock Series CBJ2 Ø RoS ow to Order With auto switch Cylinder standard stroke Refer to s on page 94. CBJ2 CDBJ2 L L 6 Lock position ead end lock R Rod end lock N : or rail mounting, screws and nuts for 2 auto switches come with the rail. : Refer to page 17 for auto switch mounting brackets. 6 N M9BW C Built-in Magnet Cylinder Model Suffix the symbol - (Rail mounting) or -B (Band mounting) to the end of part number for cylinder with auto switch. Example Rail mounting CDBJ2B-45-N- Band mounting CDBJ2B-6-N-B With auto switch (Built-in magnet) Mounting B Basic L xial foot Rod fl ange D Double clevis 1 : oot/lange brackets are shipped together with the product, but not assembled. 1: Rod end lock only. Manual release N Non-locking type uto switch Without auto switch : or applicable auto switches, refer to the table below. Enter the auto switch mounting type ( or B) even when a built-in magnet cylinder without an auto switch is required. uto switch mounting bracket 2 2: This symbol is indicated when the D-9 or M9 type auto switch is specifi ed. This mounting bracket does not apply to other auto switches (D-C7 and 7, etc.) ( ) Number of auto switches 2 pcs. S 1 pc. n n pcs. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Special function Electrical Load voltage uto switch model Lead wire length [m] Wiring Pre-wired Band mounting Rail mounting pplicable load entry (Output) None DC C connector Perpendicular In-line Perpendicular In-line ( ) (M) (L) () (N) 3-wire (NPN) M9NV M9N M9NV M9N 5 V,12 V IC circuit Grommet 3-wire (PNP) M9PV M9P M9PV M9P M9BV M9B M9BV M9B 2-wire 12 V Connector 7C J79C 3-wire (NPN) M9NWV M9NW M9NWV M9NW Diagnostic indication 5 V,12 V IC circuit Relay, Yes 3-wire (PNP) 24 V M9PWV M9PW M9PWV M9PW (2-colour indicator) PLC 2-wire 12 V M9BWV M9BW M9BWV M9BW Grommet 3-wire (NPN) M9NV 1 M9N 1 M9NV 1 M9N 1 Water resistant 5 V,12 V IC circuit 3-wire (PNP) M9PV 1 M9P 1 M9PV 1 M9P 1 (2-colour indicator) 2-wire 12 V M9BV 1 M9B 1 M9BV 1 M9B 1 With diagnostic output (2-colour indicator) 4-wire (NPN) 5 V,12 V 7N 79 IC circuit 3-wire 5 V 96V 96 96V 96 IC circuit Grommet Yes (NPN equivalent) 2 V V 93V V 2 93 No Relay, 2-wire 24 V 12 V 1 V or less 9V 9 9V 9 IC circuit Yes C73C 73C PLC Connector No 24 V or less C8C 8C IC circuit Diagnostic indication (2-colour indicator) Grommet Yes 79W Solid state auto switch Reed auto switch Indicator light 1: Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. 2: 1 m type lead wire is only applicable to D-93. : Lead wire length symbols:.5 m 1 m 3 m 5 m None M L N (Example) M9NW (Example) M9NWM (Example) M9NWL (Example) M9NW (Example) 7CN : Since there are other applicable auto switches than listed, refer to page 18 for details. : or details about auto switches with pre-wired connector, refer to the uto Switch Guide on : Solid state auto switches marked with are produced upon receipt of order. : The D-9 /M9 /7 /8 /7 /J7 auto switches are shipped together, (but not assembled). (owever, when the D-9 /M9 types are selected, only auto switch mounting brackets are assembled before being shipped.) : When the D-9 /M9 types are mounted on a rail, order auto switch mounting brackets separately. Refer to page 17 for details. 93

95 ir Cylinder: With End Lock Series CBJ2 The air cylinder is equipped with end lock function. Symbol Rubber bumper Moisture Control Tube Series IDK When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. Simply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. or details, refer to the IDK series in the catalogue on Specifications Bore size ction Double acting, Single rod luid ir Proof pressure 1 MPa Maximum operating pressure.7 MPa Minimum operating pressure.15 MPa mbient and fluid temperature Without auto switch: -1 C to 7 C (No freezing) With auto switch: -1 C to 6 C Cushion Rubber bumper Lubrication Not required (Non-lube) length tolerance +1. Piston speed 5 to 75 mm/s llowable kinetic energy.9 J :.6 MPa for parts other than the lock unit. Lock Specifications Lock position olding force (Max.) Lock release pressure Backlash Manual release s Mounting Brackets/Part No. Mounting bracket oot lange T-bracket 1 1: T-bracket is used with double clevis (D). Refer to pages 11 to 18 for cylinders with auto switches. ead end, Rod end 98 N Min..15 MPa 1 mm or less Non-locking type Bore size stroke 15, 3, 45, 6, 75, 1, 125, 15, 175, 2 : Manufacture of intermediate strokes in 1 mm increments is possible. (Spacers are not used.) : pplicable strokes should be confirmed according to the usage. or details, refer to ir Cylinders Model Selection on In addition, the products that exceed the standard stroke might not be able to fulfill the specifications due to the deflection etc. Bore size CJ-LB CJ-B CJ-TB uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. 94 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

96 Series CBJ2 Specific Product Precautions Be sure to read this before handling. Please consult with SMC for products outside these specifications. Use Recommended ir Pressure Circuit. Caution It is necessary for proper locking and unlocking. W Operating Pressure Caution Supply air pressure of.15 MPa or higher to the port on the side that has the lock mechanism, as it is necessary for disengaging the lock. W With head end lock With rod end lock Exhaust ir Speed Caution The lock will engage automatically if the air pressure at the port on the side that has the lock mechanism becomes.5 MPa or less. Be aware that if the piping on the side that has the lock mechanism is narrow and long, or if the speed controller is located far from the cylinder port, the exhaust air speed could become slower, involving a longer time for the lock to engage. similar result will ensure if the silencer that is installed on the exhaust port of the solenoid valve becomes clogged. Selection Caution 1. Do not use a 3-position solenoid valve. void using this cylinder in combination with a 3-position solenoid valve (particularly the closed centre metal seal type). If air pressure becomes sealed inside the port on the side that contains the lock mechanism, the lock will not engage. Even if the lock is engaged at first, the air that leaks from the solenoid valve could enter the cylinder and cause the lock to disengage as time elapses. 2. Back pressure is necessary for unlocking. Before starting, make sure that air is supplied to the side that is not equipped with a lock mechanism as shown in the diagram above. Otherwise, the lock may not disengage. (Refer to Lock Disengagement. ) 3. Disengage the lock before installing or adjusting the cylinder. The lock could become damaged if the cylinder is installed with its lock engaged. 4. Operate the cylinder at a load ratio of 5 % or less. The lock might not disengage or might become damaged if a load ratio of 5 % is exceeded. 5. Do not synchronize multiple cylinders. Do not operate two or more end lock cylinders synchronized to move a single workpiece because one of the cylinder locks may not be able to disengage when required. 6. Operate the speed controller under meterout control. If operated under meter-in control, the lock might not disengage. 7. On the side that has a lock, make sure to operate at the stroke end of the cylinder. The lock might not engage or disengage if the piston of the cylinder has not reached the stroke end. 8. The position adjustment of the auto switch should be performed at two positions; a position determined by the stroke and a position after the backlash movement (by 1 mm). When a 2-colour indication switch is adjusted to show green at the stroke end, the indication may turn red when the cylinder returns by the backlash. This, however, is not an error. 95 Lock Disengagement Warning To disengage the lock, make sure to supply air pressure to the port on the side without a lock mechanism, thus preventing the load from being applied to the lock mechanism. (Refer to the recommended air pressure circuit.) If the lock is disengaged when the port on the side that does not contain a lock mechanism is in the exhausted state and the load is being applied to the lock mechanism, undue force will be applied to the lock mechanism, and it may damage the lock mechanism. lso, it could be extremely dangerous, because the piston rod could move suddenly. Manual Disengagement Caution Non-locking type manual release Insert the bolt, which is provided as an accessory part, through the rubber cap (it is not necessary to remove the rubber cap). Screw the bolt into the lock piston and pull the bolt to disengage the lock. Releasing the bolt will re-engage the lock. The bolt size, pulling force, and the stroke are listed below. Bore size Thread size Pulling force [N] M2.5 x.45 x 25 L or more Bolt should be detached under normal operation, otherwise it may cause malfunction of the locking feature. Rubber cap

97 ir Cylinder: With End Lock Series CBJ2 Construction (Not able to disassemble) ead end lock!!5 K!7 e!6!3!1 K o i!2!8 u t!4 y Rod end lock With auto switch Component Parts No. Description Material Note No. Description Material Note 1 Rod cover luminium alloy 11 exagon socket head cap screw lloy steel 1B Rod cover Stainless steel 12 Cap luminium alloy 2 ead cover luminium alloy 13 Rubber cap Synthetic rubber 3 Cylinder tube Stainless steel 14 Bumper Urethane 4 Piston luminium alloy 15 Rod seal R 4B Piston B luminium alloy Piston seal R 5 Piston rod Carbon steel 17 Tube gasket R 6 Locking piston Carbon steel 18 Locking piston seal R 7 Locking bushing Copper alloy 19 Mounting nut Brass 8 Lock spring Spring steel 2 Rolled steel 9 Bumper Urethane 21 Magnet 1 exagon socket head cap screw lloy steel Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 96

98 Series CBJ2 Dimensions Basic With rod end lock: C BJ2B- -RN M5 x M1 x 1 Piping port 2 x M5 x Ø 2 Ø 6 h Ø With head end lock: C BJ2B- -N h x M1 x 1 8 Piping port 2 x M5 x.8 M5 x.8 6 Ø 2 Ø Ø

99 ir Cylinder: With End Lock Series CBJ2 Dimensions lange With rod end lock: C BJ Ø Cover outside diameter M5 x.8 M1 x 1 With head end lock: C BJ Ø Cover outside diameter Ø Piping port 2 x M5 x Cover side (ead side) x Ø 5.5 Mounting hole 6 2 x M1 x 1 8 Piping port 2 x M5 x.8 Cover side (Rod side) M5 x.8 15 Ø RN N x Ø 5.5 Mounting hole With End Lock Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK CBJ2 uto Switch 98

100 Series CBJ2 Dimensions xial foot With rod end lock: C BJ2L- -RN 2 x Ø 5.5 Mounting hole 14.5 Ø 2 M5 x.8 M1 x 1 8 Piping port 2 x M5 x.8 5 Cover side (ead side) Ø With head end lock: C BJ2L- -N 2 x Ø 5.5 Mounting hole Ø 2 2 x M1 x 1 M5 x.8 Ø Piping port 2 x M5 x.8 6 Cover side (Rod side)

101 ir Cylinder: With End Lock Series CBJ2 Dimensions Double clevis With rod end lock: C BJ2D- M5 x Piping port 2 x M5 x.8 Ø Ø RN Ø Clevis pin (Ø 5d9.3.6) Ø Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 1

102 Series uto Switch Mounting uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight Solid state auto switch <Band mounting> D-M9 D-M9 W D-M9 Reed auto switch <Band mounting> D-9 uto switch s 17.5 uto switch s (24) B 24.5 (22) B ( ): Dimension of the D-M9. and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. ( ): Dimension of the D-96. and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. D-M9 V D-M9 MV D-M9 V D-9 V uto switch s 17.5 uto switch s 17.5 D-7 D-7 W D-7B D-7N D-7C 2 (22) B ( ): Dimension of the D-M9 V. and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. uto switch s 17.5 D-C7 /C8 D-C73C /C8C 22 B and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. uto switch s 17.5 B B 11

103 uto Switch Mounting Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight <Rail mounting> D-M9 D-M9 W D-M9 D-M9 V D-M9 WV D-M9 V D-7 /J79 D-7 W/J79W D-79/7B D-7 V/7 WV D-7BV D-J79C uto switch 23.5 (25.5) uto switch 21.5 (23.5) uto switch uto switch B B B B s s 14.5 s s 14.5 ( ): Dimension of the D-M9 V. <Rail mounting> D-9 uto switch 26 (23.5) uto switch 23.5 uto switch uto switch B B B B s ( ): Dimension of the D-M9. ( ): Dimension of the D-96. D-9 V D-7 /8 D-73C/8C D-79W D-7 /8 s s s Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 12

104 Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight uto Switch Proper Mounting Position (Single acting type excluded) uto switch model Bore size 6 D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V D-9 D-9 V Band mounting D-7 D-7C D-7N D-7 W D-7B : The values in ( ) are measured from the end of the auto switch mounting bracket. : The values in [ ] for bore size Ø 6 are for the double rod type (W series). : djust the auto switch after confi rming the operating condition in the actual setting. D-C7 D-C8 D-C73C D-C8C B B B B 5.5 (4.5) [12] 5.5 (4.5) [4] 1.5 (.5) [8] 1.5 (.5) [] 1 (7.5) 1 () 2 (8.5) 1 (5) 6 (5) 6 (1) 2 (1) (5.5) 6.5 (5.5) 6.5 (1.5) 2.5 (1.5) uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V D-9 D-9 V D-7 /J79 D-7 W/J79W D-7 V/7 WV D-79 D-J79C D-7B D-7BV D-7 /8 D-73C/8C Rail mounting D-7NT Bore size B B B B B B (.5) D-7 D-8 D-79W uto Switch Mounting eight uto switch model D-M9 D-M9 W D-M9 D-9 D-M9 V D-M9 WV D-M9 V D-9 V Band mounting D-7 /7 W D-7N D-7B D-C7 /C8 D-7C D-C73C D-C8C Bore size s s s s s uto switch model D-M9 D-M9 V D-M9 W D-M9 WV D-M9 D-M9 V D-9 D-9 V D-7 /J79 D-7 W/J79W D-7B/79 D-7NT D-7 /8 D-7 V D-7 WV D-7BV Rail mounting D-J79C D-7 D-8 D-73C D-8C Bore size s s s s s s s D-79W 13

105 uto Switch Mounting Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight/single cting, Spring Return Type (S) uto Switch Proper Mounting Position: Spring Return Type (S) Type (CDJ2 - S) Non-rotating Rod Type (CDJ2K - S) Direct Mount Type (CDJ2R - S) Direct Mount, Non-rotating Rod Type (CDJ2RK - S) Band mounting Rail mounting uto switch model D-M9 D-M9 W/M9 WV D-M9 /M9 V D-M9 V D-9 D-9 V D-7 /7C D-7 W/7B D-7N D-C7 /C8 D-C73C D-C8C D-M9 D-M9 W/M9 WV D-M9 /M9 V D-M9 V D-9 D-9 V D-7 /7 V D-J79/J79C D-7 /8 D-73C/8C D-7 W/J79W D-7 WV/79 D-7B/7BV D-7NT D-7 /8 D-79W Bore size dimensions 5 to 9 st 1 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st : In the actual setting, adjust them after confirming the auto switch performance. B Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch 14

106 Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight/single cting, Spring Extend Type (T) uto Switch Proper Mounting Position: Spring Extend Type (T) Type (CDJ2 - T) Non-rotating Rod Type (CDJ2K - T) Direct Mount Type (CDJ2R - T) Direct Mount, Non-rotating Rod Type (CDJ2RK - T) Band mounting uto switch model D-M9 D-M9 W/M9 WV D-M9 /M9 V D-M9 V D-9 D-9 V D-7 /7C D-7 W/7B D-7N D-C7 /C8 D-C73C D-C8C D-M9 D-M9 W/M9 WV D-M9 /M9 V D-M9 V D-9 D-9 V Bore size B dimensions 5 to 9 st 1 to 15 st to 3 st 31 to 45 st 46 to 6 st 61 to 75 st 76 to 1 st 11 to 125 st 126 to 15 st Rail mounting D-7 /7 V D-J79/J79C D-7 /8 D-73C/8C D-7 W/J79W D-7 WV/79 D-7B/7BV D-7NT D-7 / D-79W : In the actual setting, adjust them after confirming the auto switch performance. 15

107 uto Switch Mounting Series Minimum for uto Switch Mounting uto switch mounting Band mounting Rail mounting 1: uto switch mounting uto switch model uto switch model D-M9 D-M9 W D-M9 D-9 With 1 pc. 3: When n is an odd number, an even number that is one larger than this odd number is used for the calculation. 4: When n is an odd number, an even number that is one larger than this odd number is used for the calculation. owever, the minimum even number is 4. So, 4 is used for the calculation when n is 1 to 3. 5: The dimension stated in ( ) shows the minimum mountable stroke when the auto switch does not project from the end face of the cylinder body and the lead wire bending space is not hindered. Different surfaces 1 uto switch D-M9 (V) B D-M9 W(V) D-M9 (V) The proper auto switch mounting position is 5.5 mm inward from the switch holder edge. The above and B indicate values for band mounting in the table of page 13. With 2 auto switches Same surface 1 The auto switch is mounted by slightly displacing it in a direction (cylinder tube circumferential exterior) so that the auto switch and lead wire do not interfere with each other. D-M9 /M9 W/M9 Less than 2 stroke 2 Less than 55 stroke 2 D-9 Less than 5 stroke 2 2: Minimum stroke for auto switch mounting in styles other than those mentioned in 1. Number of auto switches With 2 pcs. With n pcs. (n: Number of auto switches) Different surfaces Same surface Different surfaces Same surface (n 2) (n 2) 2 (n = 2, 4, 6 ) 3 (n = 2, 3, 4, 5 ) D-M9 V D-M9 WV D-M9 V D-9 V D-7 /7 W D-7B D-7N D-C7 D-C8 D-7C D-C73C D-C8C D-M9 V 5 5 D-9 V 5 1 D-M9 D-9 D-M9 WV D-M9 V 1 (5) D-M9 W 15 (1) 5 15 D-M9 15 (1) 5 2 (15) 5 D-7 D-J79 D-7 V D-J79C D-7 W/J79W D-7B/79/7NT D-7 WV D-7BV D-7 /8 D-7 /8 D-73C/8C D-7 D D-79W 1 15 (n 2) (n 2) 2 (n = 2, 4, 6 ) 3 (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) 3 (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) 3 (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) 3 (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) 3 (n = 2, 3, 4, 5 ) (n 2) (n 2) 2 (n = 2, 4, 6 ) 3 (n = 2, 3, 4, 5 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) (n 2) (n = 4, 6 ) 4 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch

108 Series Operating Range Band mounting Rail mounting uto switch model Bore size 6 1 D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D D-7 /7 W D-7B/7N D-7C D-C7 /C8/C73C/C8C D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-9 /9 V D-7 /J79/7 W/J79W D-7 V/7 WV/79 D-J79C/7B/7BV 5 5 D-7NT D-7 /8/7/8 D-73C/8C 8 9 D-79W : Values which include hysteresis are for guideline purposes only, they are not a guarantee (assuming approximately ±3 % dispersion) and may change substantially depending on the ambient environment. uto Switch Mounting Brackets/Part No. uto switch uto switch model mounting Band mounting Band mounting 4 Rail mounting D-M9 D-M9 V D-M9 W D-M9 WV D-9 D-9 V D-M9 2 D-M9 V 2 c f e g Bore size 6 1 BJ6-6 ( set of a, b, d, f) BJ6-6S ( set of a, b, d, g) Switch bracket (Resin) Transparent (Nylon) 1 Transparent blue (Nylon) 1 White (PBT) Black (PBT) D-7 /7 W D-7B/7N D-C7 /C8 D-C73C/C8C D-M9 D-M9 V D-M9 W D-M9 WV D-M9 4 D-M9 V 4 D-9 D-9 V d Switch holder (inc die-casted) BJ2-6 ( set of band and screw) BJ6-1 ( set of a, b, c, d) BJ6-1S ( set of a, b, d, e) a uto switch mounting band BJ2-1 ( set of band and screw) BQ2-12 (S) ( set of a and b) BQ2-12 BQ2-12S BJ6- ( set of a, b, c, d) BJ6-S ( set of a, b, d, e) b uto switch mounting screw a uto switch mounting bracket BJ2- ( set of band and screw) BQ2-12 (S) ( set of a and b) Set screw (ccessory) b uto switch mounting screw Nut (Cylinder accessory) 17 1: Since the switch bracket (made from nylon) are affected in an environment where alcohol, chloroform, methylamines, hydrochloric acid or sulfuric acid is splashed over, so it cannot be used. Please contact SMC regarding other chemicals. 2: s the indicator LED is projected from the auto switch unit, indicator LED may be damaged if the switch bracket is fixed on the indicator LED. 3: When the cylinder is shipped, the auto switch mounting bracket and the auto switch will be included. 4: or D-M9 (V), order the BQ2-12S, which uses stainless steel mounting screws. Band Mounting Brackets Set Part No. Set part no. BJ2- BJ4-1 BJ4-2 BJ5-1 BJ5-2 Contents uto switch mounting band (a) uto switch mounting screw (b) Switch bracket (White/PBT) (e) Switch holder (d) Switch bracket (Black/PBT) (g) Switch holder (d) Switch bracket (Transparent/Nylon) (c) 1 Switch holder (d) Switch bracket (Transparent blue/nylon) (f) 1 Switch holder (d) Bore size 6 1 BJ2-6 BJ2-1 BJ2- [Stainless Steel Mounting Screw] The following stainless steel mounting screw kit is available. Use it in accordance with the operating environment. (Since the auto switch mounting bracket is not included, order it separately.) BB4: or D-C7/C8/7 types 5: Refer to the uto Switch Guide on for details on the BB4. When the D-7B type auto switch is shipped independently, the BB4 is attached.

109 uto Switch Mounting Series Other than the applicable auto switches listed in ow to Order, the following auto switches are mountable. Refer to the uto Switch Guide on for the detailed specifications. Type Mounting Model Electrical entry eatures Sold state Reed Band mounting Rail mounting Band mounting Rail mounting D-71/72/7B D-7NW/7PW/7BW D-79/7P/J79 Grommet (In-line) Diagnostic indication (2-colour indicator) D-79W/7PW/J79W Diagnostic indication (2-colour indicator) D-7NV/7PV/7BV Grommet D-7NWV/7BWV (Perpendicular) Diagnostic indication (2-colour indicator) D-C73/C76 D-C8 Grommet Without indicator light D-73/76 (In-line) D-8 D-73 D-8 Grommet (Perpendicular) Without indicator light Without indicator light pplicable bore size Ø 6 to Ø Ø 1, Ø Ø 6 to Ø Ø 1, Ø : With pre-wired connector is also available for solid state auto switches. or details, refer to the uto Switch Guide on : Normally closed (NC = b contact) solid state auto switches (D-9G/9) are also available. or details, refer uto Switch Guide on Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 18

110 Prior to Use uto Switch Connection and Example Sink Input Specifications Source Input Specifications 3-wire, NPN Brown Input 3-wire, PNP Brown Input uto switch Black uto switch Black Blue COM (PLC internal circuit) Blue COM (PLC internal circuit) 2-wire Brown Input 2-wire Brown COM uto switch uto switch Blue Blue COM Input (PLC internal circuit) (PLC internal circuit) Connect according to the applicable PLC input specifications, as the connection method will vary depending on the PLC input specifi cations. Example of ND (Series) and OR (Parallel) Connection When using solid state auto switches, ensure the application is set up so the signals for the fi rst 5 ms are invalid. 3-wire ND connection for NPN output (Using relays) (Performed with auto switches only) Brown Relay Brown Load Black uto switch 1 uto switch 1 Black Load Blue Blue 3-wire OR connection for NPN output Brown Black Load uto switch 1 Blue Brown Brown Brown uto switch 2 Black uto switch 2 Black uto switch 2 Black Blue Blue Blue 3-wire ND connection for PNP output (Using relays) Brown Relay Black uto switch 1 Blue Brown (Performed with auto switches only) Brown Black uto switch 1 Blue Brown 3-wire OR connection for PNP output Brown Black uto switch 1 Blue Brown uto switch 2 Black Blue Load uto switch 2 Black Load Blue uto switch 2 Black Blue Load 2-wire ND connection uto switch 1 uto switch 2 Brown Blue Brown Blue Load When two auto switches are connected in series, a load may malfunction because the load voltage will decline when in the ON state. The indicator lights will light up when both of the auto switches are in the ON state. uto switches with load voltage less than 2 V cannot be used. Load voltage at ON = Power supply voltage Residual voltage x 2 pcs. = 24 V 4 V x 2 pcs. = V Example: Power supply is 24 V DC Internal voltage drop in auto switch is 4 V wire OR connection uto switch 1 uto switch 2 Brown Blue Brown Blue Load (Solid state) When two auto switches are connected in parallel, malfunction may occur because the load voltage will increase when in the O state. Load voltage at O = Leakage current x 2 pcs. x Load impedance = 1 m x 2 pcs. x 3 kω = 6 V Example: Load impedance is 3 kω. Leakage current from auto switch is 1 m. (Reed) Because there is no current leakage, the load voltage will not increase when turned O. owever, depending on the number of auto switches in the ON state, the indicator lights may sometimes grow dim or not light up, due to the dispersion and reduction of the current fl owing to the auto switches.

111 uto Switch With End Lock CBJ2 Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod RK RK R R W K K W 11

112 Series Simple Specials/ Please contact SMC for detailed specifi cations, delivery and prices. Simple Specials Symbol The following special specifi cations can be ordered as a simplifi ed Made-to-Order. There is a specifi cation sheet available on paper and CD-ROM. Please contact your SMC sales representatives if necessary. K Specifications pplicable bore size ( type) Double acting Single acting Single rod Double rod Single rod (spring return) Single rod (spring extend) (Non-rotating rod type) Double acting Single acting Single Single rod rod (spring return) Single rod (spring extend) -X, 1, 1, 11 Change of rod end shape Ø 6 to Ø Symbol Specifications pplicable bore size ( type) Double acting Single acting Single Double Single rod Single rod rod rod (spring return) (spring extend) K (Non-rotating rod type) Double acting Single acting Single Single rod Single rod rod (spring return) (spring extend) -XB6 eat resistant cylinder (-1 to 15 C) Ø 6 to Ø -XB7 -XB9 -XB13 -XC3 -XC8 -XC9 -XC1 -XC11 -XC22 -XC51 -XC85 -X446 -X773 Cold resistant cylinder (-4 to 7 C) Low speed cylinder (1 to 5 mm/s) Low speed cylinder (5 to 5 mm/s) Special port position djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type luororubber seal With hose nipple Grease for food processing equipment PTE grease Short pitch mounting Ø 6 to Ø Ø 6 to Ø Ø 6 Ø 6 to Ø Ø 1, Ø Ø 1, Ø Ø 1, Ø Ø 1, Ø Ø 6 to Ø Ø 6 to Ø Ø 1, Ø Ø 1, Ø Ø 6 111

113 Simple Specials/ Series (Built-in speed controller type) Double acting Single rod Double rod (Built-in speed controller type) Double acting Single rod Double rod R (Direct mount type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) R (Direct mount type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) RK (Direct mount, Non-rotating rod type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) RK (Direct mount, Non-rotating rod type) Double acting Single acting Single rod Single rod Single rod (spring return) (spring extend) Symbol -X, 1, 1, 11 Symbol -XB6 -XB7 -XB9 -XB13 -XC3 -XC8 -XC9 -XC1 -XC11 -XC22 -XC51 -XC85 -X446 -X773 Page 113 Page Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 112

114 Series Simple Specials These changes are dealt with Simple Specials System. 1 Change of Rod End Shape Symbol -X, 1, 1, 11 pplicable Series ction Symbol for change of rod end shape Note type Non-rotating rod type Built-in speed controller type Direct mount type R Direct mount, Non-rotating rod type RK 1: Except rod end bracket and pivot bracket 2: Except rod end bracket Double acting, Single rod X, 1, 1, 11 1 Single acting (Spring return/extend) X, 1, 1, 11 1 W Double acting, Double rod X, 1, 1, 11 Double acting, Single rod X, 1, 1, 11 1 K Single acting (Spring return/extend) X, 1, 1, 11 1 Double acting, Single rod X, 1, 1, 11 1 W Double acting, Double rod X, 1, 1, 11 1 Double acting, Single rod X, 1, 1, 11 2 Single acting (Spring return/extend) X, 1, 1, 11 2 Double acting, Single rod X, 1, 1, 11 2 Single acting (Spring return/extend) X, 1, 1, 11 2 Precautions 1. SMC will make appropriate arrangements if no dimension, tolerance, or fi nish instructions are given in the diagram. 2. dimensions marked with will be as follows to the rod diameter (D). Enter any special dimension you desire. D 6 D 1 mm, 6 < D 25 D 2 mm, D > 25 D 4 mm 3. In the case of double rod type and single acting retraction type, enter the dimensions when the rod is retracted. Symbol: Symbol: 1 Symbol: 1 Symbol: 11 3 R sphere TP R sphere 113

115 Series Please contact SMC for detailed dimensions, specifi cations and lead times. Symbol 1 eat Resistant Cylinder (-1 to 15 C) -XB6 ir cylinder which changed the seal material and grease, so that it could be used even at higher temperature up to 15 from -1 C. pplicable Series Description Model ction Note type W : Operate without lubrication from a pneumatic system lubricator. : Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. : In principle, it is impossible to make built-in magnet type and the one with auto switch. But, as for the one with auto switch, and the heat resistant cylinder with heat resistant auto switch, please contact SMC. : Piston speed is ranged from 5 to 5 mm/s. ow to Order Double acting, Single rod Double acting, Double rod model no. eat resistant cylinder Except with air cushion and auto switch Except with air cushion and auto switch XB6 Symbol 2 Cold Resistant Cylinder (-4 to 7 C) -XB7 ir cylinder which changed the seal material and grease, so that it could be used even at lower temperature down to -4 C. pplicable Series Description Model ction Note type W Double acting, Single rod Double acting, Double rod : Operate without lubrication from a pneumatic system lubricator. : Use dry air which is suitable for heatless air dryer, etc. not to cause the moisture to be frozen. : Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. : Mounting auto switch is impossible. : Piston speed is ranged from 5 to 5 mm/s. ow to Order model no. Except with air cushion and auto switch, rod end bracket, pivot bracket Cold resistant cylinder Except with air cushion and auto switch XB7 Specifications mbient temperature range -1 C to 15 C Seals material luororubber Grease eat resistant grease Specifications other than above and external dimensions Warning Precautions Symbol 3 Low Speed Cylinder (1 to 5 mm/s) -XB9 Even if driving at lower speeds 1 to 5 mm/s, there would be no stick-slip phenomenon and it can run smoothly. Same as standard type Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Specifications mbient temperature range -4 C to 7 C Seals material Low nitrile rubber Grease Cold resistant grease uto switch Not mountable Dimensions Same as standard type dditional specifications Same as standard type Warning Precautions Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK RK pplicable Series Description Model ction Note type ow to Order Double acting, Single rod model no. Low speed cylinder Except with air cushion XB9 Specifications Piston speed Dimensions dditional specifications 1 to 5 mm/s Same as standard type Same as standard type : Operate without lubrication from a pneumatic system lubricator. Warning Precautions Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. 114 With End Lock CBJ2 uto Switch

116 Series Symbol 4 Low Speed Cylinder (5 to 5 mm/s) -XB13 Even if driving at lower speeds 5 to 5 mm/s, there would be no stick-slip phenomenon and it can run smoothly. pplicable Series Description Model ction Note type Double acting, Single rod Ø 6 only : Operate without lubrication from a pneumatic system lubricator. : or the speed adjustment, use speed controllers for controlling at lower speeds. (S-M/S-M series) ow to Order model no. Low speed cylinder XB13 Specifications Piston speed Dimensions dditional specifications Warning Precautions Compared with the standard type, a cylinder which changes the connection port location of rod/head cover. 5 to 5 mm/s Same as standard type Same as standard type Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Symbol 5 Special Port Location -XC3 pplicable Series Description Model ction Note type Non-rotating rod type K Double acting, Single rod Double acting, Single rod ow to Order model no. XC3 B Rod port location viewed from the rod side : or port location, refer to the diagrams on the right and show the symbols of, B, C and D. Except with rail mounting type auto switches, with air cushion Except with rail mounting type auto switches Special port location ead port location viewed from the rod side Specifications: Same as standard type Port Location Corresponding symbol of mounting bracket (Positional relationships) D D C C Port B Port B : Viewed from the rod side, the ports are rendered, B, C, and D, in the clockwise direction. <Position relation between clevis and port> : Viewed from the rod side, with the clevis positioned as shown in the diagram, the ports are rendered, B, C, and D, in the clockwise direction. Symbol 6 djustable Cylinder/djustable Extension Type -XC8 It adjusts the extending stroke by the stroke adjustable mechanism equipped in the head side. (fter the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.) pplicable Series Description Model ction Note type ow to Order Double acting, Single rod model no. djustable stroke cylinder/ djustable extension type Except with air cushion, double-side bossed, double clevis, double foot, head fl ange. XC8 adjustable mechanism Specifications adjustment symbol adjustment range to 15 dditional specifications Same as standard type Warning Precautions 1. When the cylinder is operating, if something gets caught between the stopper bracket for adjusting the stroke and the cylinder body, it could cause bodily injury or damage the peripheral equipment. Therefore, take preventive measures as necessary, such as installing a protective cover. 2. To adjust the stroke, make sure to secure the wrench flats of the stopper bracket by a wrench etc. before loosening the lock nut. If the lock nut is loosened without securing the stopper bracket, be aware that the area that joins the load to the piston rod or the area in which the piston rod is joined with the load side and the stopper bracket side could loosen first. It may cause an accident or malfunction. Dimensions (Dimensions other than below are the same as standard type.) 115 S x + 2 Bore size pplicable stroke S 1 15 to to : Dimensions except mentioned above are the same as standard type.

117 Series Symbol 7 djustable Cylinder/djustable Retraction Type -XC9 The retracting stroke of the cylinder can be adjusted by the adjusting bolt. pplicable Series Description Model ction Note type Non-rotating rod type Direct mount type Direct mount, Non-rotating rod type K R RK ow to Order model no. Double acting, Single rod Double acting, Single rod Double acting, Single rod Double acting, Single rod djusting bolt Except double-side bossed, double clevis, double foot, head fl ange. Except double-side bossed, double clevis, double foot, head fl ange. B port D port C port port Specifications adjustment symbol adjustment range to 15 dditional specifications B DC BM djusting bolt + Max. 3 8 Dual Cylinder/Double Rod Type -XC1 Two cylinders are constructed as one cylinder in a back-to-back confi guration allowing the cylinder stroke to be controlled in three steps. pplicable Series Description Model ction Note type Non-rotating rod type K djustable stroke cylinder/ djustable retraction type Double acting, Single rod Double acting, Single rod XC9 Except with air cushion, rod end bracket and pivot bracket Except rod end bracket and pivot bracket ow to Order Mounting Bore size B XC1 Dual stroke cylinder/double rod type Dimensions (Dimensions other than below are the same as standard type.) Caution Precautions Same as standard type 1. When air is supplied to the cylinder, if the stroke adjusting bolt is loosened in excess of the allowable stroke adjustment amount, be aware that the stroke adjusting bolt could fly out or air could be discharged, which could injure personnel or damage the peripheral equipment. 2. djust the stroke when the cylinder is not pressurised. If it is adjusted in the pressurised state, the seal of the adjustment section could become deformed, leading to air leakage. Dimensions (Dimensions other than below are the same as standard type.) Bore size BM 1 M5 x.8 74 M5 x.8 75 : Dimensions except mentioned above are the same as standard type. Symbol Specifications Maximum manufacturable stroke 3 (Maximum 15 on one side) dditional specifications Same as standard type unction When air pressure is supplied to ports and, both strokes and B retract. Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 S + B S + + ( + B) Bore size S B B B D C B D C B D C When air pressure is supplied to ports and, out strokes. When air pressure is supplied to ports and, B out strokes. When air pressure is supplied to ports and, both strokes and B out strokes. uto Switch 1

118 Series Symbol 9 Dual Cylinder/Single Rod Type -XC11 Two cylinders can be integrated by connecting them in line, and the cylinder stroke can be controlled in two stages in both directions. pplicable Series Description Model ction Note type Double acting, Single rod Except with air cushion Specifications: Same as standard type : Please contact SMC for each manufacturable stroke length. ow to Order Mounting Bore size B Pivot bracket Rod end bracket XC11 Caution Precautions 1. Do not supply air until the cylinder is fixed. 2. If air is supplied without securing the cylinder, the cylinder could lurch, posing the risk of bodily injury or damage to the peripheral equipment. Dimensions (Dimensions other than below are the same as standard type.) Intermediate cover B port C port port SB + B + ( + B) Bore size S SB : Dimensions except mentioned above are the same as standard type. S + : When mounting an auto switch at the extended piston rod side, the following auto switches interfere with the intermediate cover. In this case, please mount on the stroke B side. Please be aware that the auto switch defects and temporarily turns ON/O when passing the intermediate position of the B stroke. Solid state auto switch: D-7, D-7C, D-7 W, D-7N, D-7B Reed auto switch: D-C7, D-C8, D-C73C, D-C8C, D-8, D-9, D-9 V, D-79W, D-73 : The maximum manufacturable stroke of this cylinder is 15 mm for both and B. B B Dual stroke cylinder/single rod type unctional description of dual stroke cylinder B B B B B B B B B B B B C C C C C C C C or B operation can be made individually. 1) Initial state ( stroke position) 2) 1st stage ( operation) When the air pressure is supplied from the port, the rod operates the stroke. 3) 2nd stage ( B- operation) ollowing the 1st stage, when the air pressure is supplied from the port, the rod operates the stroke B-. 4) Cylinder retraction When the air pressure is supplied from the port, the rod retracts completely. operation 1) Initial state ( stroke position) 2) Operation When the air pressure is supplied from the port, the rod operates the stroke. B operation 1) Initial state ( stroke position) 2) Operation When the air pressure is supplied from the port, the rod operates the stroke B. Double output is possible. B C 1) Initial state ( stroke position) B 117 W W B C 2) Double output When the air pressure is supplied to the and ports at the same time, the double output can be obtained in the stroke range.

119 Series Symbol 1 luororubber Seal -XC22 pplicable Series Description Model ction Note type W ow to Order model no. Double acting, Single rod Except with air cushion Single acting (Spring return/extend) Double acting, Double rod Except with air cushion Non-rotating rod type K Double acting, Single rod Direct mount type R Double acting, Single rod luororubber seal XC22 Specifications Seal material mbient temperature range The one with hose nipple attached in order to save time for assembly at the time of shipment. ose nipple Width across flats 8(7) luororubber With auto switch 1 : -1 C to 6 C (No freezing) Without auto switch: -1 C to 7 C Specifications other Same as standard type than above and external dimensions 1: Please contact SMC, as the type of chemical and the operating temperature may not allow the use of this product. 2: Cylinders with auto switches can also be produced; however, auto switch related parts (auto switch units, mounting brackets, built-in magnets) are the same as standard products. Before using these, please contact SMC regarding their suitability for the operating environment. Symbol 11 With ose Nipple -XC51 pplicable Series Description Model ction Note type Non-rotating rod type Built-in speed controller type W K Direct mount type R Direct mount, Non-rotating rod type RK ow to Order Double acting, Single rod Single acting (Spring return/extend) Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod W Double acting, Double rod model no. Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Single acting (Spring return/extend) With hose nipple XC51 4 ose nipple type 4 Ø 4/2.5 with restrictor 6 Ø 6/4 with restrictor M4 Ø 4/2.5 without restrictor M6 Ø 6/4 without restrictor Specifications: Same as standard type pplicable ose Nipple Type Symbol pplicable bore size unction ose nipple part no. 4 Ø 4/2.5 With a fixed orifice CJ Ø 6/4 (Ø.8) CJ-5-6 M4 Ø 4/2.5 Without fixed M-5-4 M6 Ø 6/4 orifi ce M-5-6 Dimensions (Dimensions other than below are the same as standard type.) 13 (12) : The above fi gure shows the Ø 6/4 hose nipple mounting dimensions. The dimensions in ( ) show those for the Ø 4/2.5 hose nipple. Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod W K K W R R RK uto Switch RK CBJ2 With End Lock 118

120 Series Symbol 12 Grease for ood Processing Equipment -XC85 ood grade grease (certifi ed by NS-1) is used as lubricant. pplicable Series Description Model ction Note type Non-rotating rod type Built-in speed controller type W K Direct mount type R Direct mount, Non-rotating rod type RK ow to Order Double acting, Single rod Single acting (Spring return/extend) Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod W Double acting, Double rod model no. Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Single acting (Spring return/extend) Grease for food processing equipment XC85 Specifications mbient temperature range Seals material Grease uto switch Dimensions Specifications other than above Splash zone Not installable With auto switch: -1 C to 6 C (No freezing) Without auto switch: -1 C to 7 C Nitrile rubber Grease for food Mountable Same as standard type Same as standard type ood zone Not installable Container Warning Precautions Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Not installable zone ood zone n environment where the raw materials and materials of food products, semi-finished food products and food products that make direct or indirect contact in a normal processing process. Splash zone n area where a portion of food products accidentally splash and stick under the intended operating conditions. n environment where food products that enter this area do not return to the food product contact portion again, and are not used as food products. Installable zone Non-food zone Other environments including the food splash zone, except for the food contact portions. ood Non-food zone Installablele : void using this product in the food zone. (Refer to the fi gure above.) : When the product is used in an area of liquid splash, or a water resistant function is required for the product, please consult with SMC. : Operate without lubrication from a pneumatic system lubricator. : Use the following grease pack for the maintenance work. GR--1 (Grease: 1 g) : Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Symbol 13 PTE Grease -X446 pplicable Series Description Model ction Note type Non-rotating rod type Built-in speed controller type W K Direct mount type R Direct mount, Non-rotating rod type RK ow to Order 119 Double acting, Single rod Single acting (Spring return/extend) Double acting, Double rod Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod W Double acting, Double rod model no. Double acting, Single rod Single acting (Spring return/extend) Double acting, Single rod Single acting (Spring return/extend) PTE grease X446 Specifications: Same as standard type Dimensions: Same as standard type : When grease is necessary for maintenance, grease pack is available, please order it separately. GR--5 (Grease: 5 g) Warning Precautions Be aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans.

121 Series 14 Short Pitch Mounting/Single cting, Spring Return Mounting pitch is shortened when cylinders are used in parallel. Changes rod cover and head cover dimensions to Ø 7. Shortens the full length with a head cover integrated with a barb fitting. Ø 7 Ø 7 M3 x mm ow to Order B6 Dimensions 15 : Directly mounted with cylinder mounting screws pplicable Series Description Model ction Note type Single acting (Spring return) M6 x SU4 Ø 3 Ø 6n X773 3 Short pitch mounting/ Single acting, spring return ir exhaust port + Be sure to use a Ø 4 or Ø 2.5 urethane tube (TU425) or a soft nylon tube (TS425). S + 5 pplication example Symbol -X773 Verification of push button actuation for mobile phones etc. Specifications Bore size 6 ction Single acting, Spring return Operating pressure range.2 to.7 MPa Port size With Ø 4 barb fitting (or soft tube) Connecting port location ead cover/xial direction 5 to 6 uto switch None 5 to 15 to 3 31 to to 6 S Note 1. When mounting a cylinder, make sure that the air exhaust port on the rod cover is not blocked. 2. When mounting a cylinder, apply thread locking adhesive on the threaded part and hold the external diameter of the rod cover with a needlenose pliers or regular pliers. Direct Mount, Non-rotating Rod Direct Mount Built-in Speed Controller Non-rotating Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Double cting, Double Rod Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Single Rod Single cting, Spring Return/Extend Double cting, Double Rod Double cting, Single Rod With End Lock W K K W R R RK RK CBJ2 uto Switch 12