1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.

Size: px

Start display at page:

Download "1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover."

Rudolph Webb
5 years ago
Views:

1 Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover. Can mount small auto switches Page 437 on 4 surfaces. Dustproof Weight Fastener on auto switch mounting groove for Page 437 dust-prevention (Option) D- -X 435

Double acting, Single rod 1 Series ø32, ø40, ø50,

bracket and/or pivot bracket available Not necessary

separately Note) Mounting bracket is shipped

Example) MD1 D 40-100Z- N V -M9W Mounting type Pivot

Applicable to only D (Double clevis) mounting type.

Single knuckle joint W Double knuckle joint With rod

knuckle joint Various mounting bracket options

: asic N: Double clevis pivot bracket C: Single

knuckle joint W: Double knuckle joint F: Rod flange

Circled numbers are those shown in figures below.

Single clevis Double clevis for cylinder knuckle

Double clevis Single knuckle joint Double knuckle

clevis Double clevis y Rod cover u Rod cover i Rod

0 436 Double knuckle joint Single knuckle joint i

Single clevis knuckle joint Double clevis Single

joint L: Axial foot Single knuckle joint Double

2 Double acting, Single rod 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 Part numbers with rod end bracket and/or pivot bracket available Not necessary to order a bracket for the applicable cylinder separately Note) Mounting bracket is shipped together with the product, but not assembled. Example) MD1 D Z- N V -M9W Mounting type Pivot bracket Nil No bracket N Pivot bracket is shipped together with the product, but not assembled. Applicable to only D (Double clevis) mounting type. Double clevis Rod end bracket Nil No bracket V Single knuckle joint W Double knuckle joint With rod end bracket V: Single knuckle joint W: Double knuckle joint Various mounting bracket options Suitable mounting brackets can be selected for the installation condition. Improved amount of mounting freedom D: Double clevis : asic N: Double clevis pivot bracket C: Single clevis G: Head flange L: Axial foot V: Single knuckle joint W: Double knuckle joint F: Rod flange racket Combinations racket combination available Circled numbers are those shown in figures below. racket for Single Double Clevis racket workpiece Single clevis Double clevis for cylinder knuckle joint knuckle joint pivot bracket Single clevis Double clevis Single knuckle joint Double knuckle joint e q t r w y o u q Head cover w e r t Single clevis Double clevis y Rod cover u Rod cover i Rod cover o Head cover!0 436 Double knuckle joint Single knuckle joint i Head cover Head cover Head cover Rod cover Double Single clevis knuckle joint Double clevis Single clevis Double clevis Single clevis Double knuckle joint L: Axial foot Single knuckle joint Double knuckle joint Double clevis!0 Single knuckle joint Clevis pivot bracket Double clevis Single knuckle joint Clevis pivot bracket Rod cover Double knuckle joint

Air Cylinder Features Lightweight Reduced weight by changing the shape of the rod cover and head cover. [kg] 1 Reduction rate [%] Current model 32 0.8 11 0.9 40 1.0 9 1.1 50 1.7 11 1.9 63 2.1 9 2.

D-M9 D-A9 Applicable speed/load Piston speed: Max. 1000 mm/s (ø32 to ø125) Load yield: See table below.

accumulating in the auto switch mounting groove.

3 Air Cylinder Features Lightweight Reduced weight by changing the shape of the rod cover and head cover. [kg] 1 Reduction rate [%] Current model At 100 stroke Mounting dimensions are the same as the current product. Can mount small auto switches on 4 surfaces. D-M9 D-A9 Applicable speed/load Piston speed: Max mm/s (ø32 to ø125) Load yield: See table below. [kg] Maximum load mass Speed: 200 mm/s Dust-prevention from fastener (Option) q Fastener avoids dust and foreign matter from entering or accumulating in the auto switch mounting groove. Fastener Cylinder tube Fastener w Flat outer circumference prevents dust and foreign matter from accumulating J 1 Auto switch mounting groove Fastener mounting Series Variations Series Type Cushion uilt-in With Water magnet rod boot resistant Page Standard Single rod 1-Z Double acting, Single rod Rubber Air 440 Standard Double rod 1W-Z Double acting, Double rod Rubber Air 450 Non-rotating rod Single rod 1K-Z Double acting, Single rod Rubber Air 456 D- -X 437

4 Combinations of Standard and Made to Order Specifications 1 Series V : Standard : Made to Order v : Special product (Please contact SMC for details.) : Not available Series Action/ Type Cushion Page Air 1 (Standard type) Double acting Single rod 440 Rubber Symbol Specifications Applicable bore size ø32 to ø100 ø125 ø32 to ø100 ø125 Standard Standard V V V V Long st Long stroke v v v v D uilt-in magnet V V V V 1l-l J K With rod boot ø32 to ø125 V V V V 10- Note 4) Clean series v v v v 20- Note 4) Copper Note 3) and Fluorine-free V v V v 1l R V Water resistant V v V v XAl Change of rod end shape X5 Note 4) Oversized rod cylinder v v v X6 Heat resistant cylinder ( 10 to 150 C) v v v XC3 Note 4) Special port location v v XC4 With heavy duty scraper v v XC5 Heat resistant cylinder ( 10 to 110 C) v v v XC6 Piston rod and rod end nut made of stainless steel v v XC7 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel ø32 to ø125 v v XC8 Adjustable stroke cylinder/ Adjustable extension type v v XC9 Adjustable stroke cylinder/ Adjustable retraction type v v XC10 Dual stroke cylinder/double rod type v v XC11 Dual stroke cylinder/single rod type v v XC12 Tandem cylinder v v XC22 Fluororubber seal v v XC26 With split pins for double clevis pin/double knuckle joint pin and flat washers ø125 XC27 Double clevis and double knuckle joint pins made of stainless steel XC29 Double knuckle joint with spring pin v v XC30 Rod trunnion Note 1) v Note 1) v XC35 With coil scraper ø32 to ø125 v v XC65 Made of stainless steel (Combination of XC7 and XC68) v v XC68 Piston rod and rod end nut made of stainless steel (with hard chrome plated piston rod) v v X846 Fastener strips mounted on switch mounting grooves Note 1) T bracket can be used only when selecting XC30. Note 2) XC10 specification for the K series is the non-rotating type on both sides. For only one side, submit a special order request form. Note 3) Copper-free for the externally exposed part. For details, refer to the Web Catalog. Note 4) The cover shape is the same as the current product. 438

5 1 Series 1W (Standard type) Double acting Double rod 1K (Non-rotating rod type) Single rod Air Rubber Air Rubber ø32 to ø100 ø125 ø32 to ø100 ø125 ø32 to ø100 Symbol V V V V V V Standard v v v v v v Long st V V V V V V D V V V V V V 1l-l J K v v v v v v 10- V v V v 20- V v V v 1l R V XAl v v v v v v X5 v v v v v X6 v v XC3 v v XC4 v v v v v XC5 v v XC6 v v XC7 XC8 XC9 J 1 Note 2) Note 2) XC10 v v XC11 v v v v v v XC12 v v v v XC22 XC26 XC27 v v v v v v XC29 Note 1) v Note 1) v Note 1) Note 1) XC30 v v XC35 v v XC65 v v XC68 X D- -X

6 Square Tube Type Air Cylinder: Standard Type Double Acting, Single Rod 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS How to Order Z With auto switch MD Z M9W With auto switch (uilt-in magnet) Mounting type asic L Axial foot F Rod flange G Head flange C Single clevis D Double clevis * Mounting bracket is shipped together with the product, but not assembled (except ø125). Port thread type Nil Rc TN NPT TF G * Refer to Ordering Example of Cylinder Assembly on page 441. uilt-in Magnet Cylinder Model mm mm mm mm mm mm mm If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) MD Z Cylinder stroke Refer to Standard Strokes on page 441. Suffix (Rod boot) Nil None J Nylon tarpaulin K Heat resistant tarpaulin Suffix (Cushion) Nil Air cushion N* Rubber bumper * Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. Made to Order For details, refer to page 441. Number of auto switches Nil 2 pcs. S 1 pc. 3 3 pcs. n n pcs. Auto switch Nil Without auto switch * For applicable auto switches, refer to the table below. Accessories 2 Nil No bracket V Single knuckle joint W Double knuckle joint * A knuckle joint pin is not provided with the single knuckle joint. * Rod end bracket is shipped together with the product. Accessories 1 Nil No bracket N Pivot bracket * Only for D mounting type. * Pivot bracket is shipped together with the product. * For details, refer to page 448. Applicable Auto Switches/Refer to pages 1575 to 1701 for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (2-color indicator) Water resistant (2-color indicator) Electrical entry Indicator light Wiring (Output) Load voltage Auto switch model Lead wire length [m] DC AC Perpendicular In-line Pre-wired connector (Nil) (M) (L) (Z) M9NV M9N V V V v v *1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. A water resistant type cylinder is recommended for use in an environment which requires water resistance. *2 1 m type lead wire is only applicable to the D-A93. * Lead wire length symbols: 0.5 m Nil (Example) M9NW * Solid state auto switches marked with v are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ * Since there are other applicable auto switches than listed above, refer to page 461 for details. * For details about auto switches with pre-wired connector, refer to pages 1648 and * Auto switches are shipped together, (but not assembled). 440 Applicable load 3-wire (NPN) 3-wire (PNP) 5 V, 12 V M9PV M9P V V V v v IC circuit 2-wire 12V M9V M9 V V V v v 3-wire (NPN) M9NWV M9NW V V V v v 5 V, 12 V Grommet Yes 3-wire (PNP) 24 V M9PWV M9PW V V V v v IC circuit 2-wire 12 V M9WV M9W V V V v v 3-wire (NPN) M9NAV*1 M9NA*1 v v V v v 5 V, 12 V 3-wire (PNP) M9PAV*1 M9PA*1 v v V v v IC circuit 2-wire 12 V M9AV*1 M9A*1 v v V v v 3-wire 5 V A96V A96 V V IC circuit Yes (NPN equivalent) Grommet 100 V A93V*2 A93 V V V V Relay, 2-wire 24 V 12 V No 100 V or less A90V A90 V V IC circuit PLC Relay, PLC

Square Tube Type Air Cylinder: Standard Type Double Acting, Single Rod 1 Series Specifications Symbol Double acting Symbol Made to Order: Individual Specifications (For details, refer to page 462.

7 Square Tube Type Air Cylinder: Standard Type Double Acting, Single Rod 1 Series Specifications Symbol Double acting Symbol Made to Order: Individual Specifications (For details, refer to page 462.) Symbol Specifications -X846 Fastener strips mounted on switch mounting grooves Made to Order (For details, refer to pages 1703 to 1896.) Specifications -XAl Change of rod end shape -X5 Oversized rod cylinder *1 *2 *3 -X6 Heat resistant cylinder ( 10 to 150 C) *1 *2 -XC3 Special port location *3 -XC4 With heavy duty scraper *2 -XC5 Heat resistant cylinder ( 10 to 110 C) *1 *2 -XC6 Piston rod and rod end nut made of stainless steel *4 Tie-rod, cushion valve, tie-rod nut, etc. -XC7 made of stainless steel *2 -XC8 Adjustable stroke cylinder/adjustable extension type *2 -XC9 Adjustable stroke cylinder/adjustable retraction type *2 -XC10 Dual stroke cylinder/double rod type *2 -XC11 Dual stroke cylinder/single rod type *2 -XC12 Tandem cylinder *2 -XC22 Fluororubber seal *2 -XC26 With split pins for double clevis pin/double knuckle joint pin and flat washers *4 -XC27 Double clevis and double knuckle joint pins made of stainless steel -XC29 Double knuckle joint with spring pin *2 -XC30 Rod trunnion *2 -XC35 With coil scraper *2 Made of stainless steel -XC65 (Combination of XC7 and XC68) *2 Piston rod and rod end nut made of stainless steel*2 -XC68 (with hard chrome plated piston rod) *1 Air cushion only *2 Except ø125 *3 The cover shape is the same as the current product. *4 ø125 only Action Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Lubrication Piston speed Double acting, Single rod Air 1.5 MPa 1.0 MPa 0.05 MPa Without auto switch: 10 to 70 C (No freezing) With auto switch: 10 to 60 C Not required (Non-lube) 50 to 1000 mm/s Stroke length tolerance Up to 250: , 251 to 1000: , 1001 to 1500: , 1501 to 2000: , 2001 to 2300: Cushion Air cushion or Rubber bumper Port size (Rc, NPT, G) 1/8 1/4 3/8 1/2 asic, Axial foot, Rod flange, Head flange Mounting Single clevis, Double clevis Standard Strokes ore size Standard stroke Stroke range q 32 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800 Max. manufacturable Stroke range w stroke Up to 1800 Up to , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 1000 Up to 2300 Up to 2300 Note 1) Intermediate strokes are available. (No spacer is used.) Note 2) Applicable strokes should be confirmed according to the usage. For details, refer to Air Cylinders Model Selection on front matter pages. In addition, the products that exceed the stroke range q might not be able to fulfill the specifications due to the deflection etc. Note 3) Please consult with SMC for manufacturability and the part numbers when exceeding the stroke range w. Rod oot Material Symbol Rod boot material Max. ambient temperature J Nylon tarpaulin 70 C K Heat resistant tarpaulin 110 C * * Max. ambient temperature for rod boot itself. Ordering Example of Cylinder Assembly Cylinder model: MD1D50-100Z-NW-M9W J 1 For special port location (-XC3), the mounting bracket and port location can be determined using the standard product corresponding to the operating conditions. Also, this is only applicable to -XC3, -XC3CC and -XC3DD with trunnion bracket. Refer to pages 460 and 461 for cylinders with auto switches. Auto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range Auto switch mounting brackets/part no. Double clevis Pivot bracket Auto switch Double knuckle joint Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint Auto switch D-M9W: 2 pcs. * Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. 441 D- -X A

8 1 Series Accessories Mounting asic Mounting rackets/part No. Axial foot Rod flange Head flange Single clevis Double clevis Standard Rod end nut V V V V V V Clevis pin V Single knuckle joint V V V V V V Option Double knuckle joint (with pin) V V V V V V Rod boot V V V V V V * Refer to page 449 for part numbers and dimensions. (Refer to page 445 for rod boot.) Note 1) Order two foots per cylinder. Note 2) Accessories for each mounting bracket are as follows. Axial foot, Rod/Head flange, Single clevis/ody mounting bolt; Double clevis/ody mounting bolt, Clevis pin, Split pins and Flat washers. Refer to page 449 for details. Theoretical Force Note) Theoretical force [N] = Pressure [MPa] x Piston area [mm 2 ] Weights asic weight asic Calculation Example) Z (asic, ø32, 100 stroke) asic weight 0.47 (asic, ø32) Additional weight 0.16/50 stroke Cylinder stroke 100 stroke x 100/50 = 0.79 kg 442 Axial foot Rod/Head flange Single clevis Double clevis Additional weight per 50 mm of stroke All mounting brackets Accessories Axial foot Note 1) -L03 -L04 -L05 -L06 -L08 -L10 -L12 Rod/Head flange -F03 -F04 -F05 -F06 -F08 -F10 -F12 Single clevis -C03 -C04 -C05 -C06 -C08 -C10 -C12 Double clevis -D03 -D04 -D05 -D06 -D08 -D10 -D12 Rod diameter Operating Piston area direction [mm 2 ] (Unit: N) OUT IN Operating pressure [MPa] OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN Single knuckle joint Double knuckle joint (with pin) [kg]

9 Square Tube Type Air Cylinder: Standard Type Double Acting, Single Rod 1 Series Kinetic Energy Absorbable by Cushion Mechanism Allowable Kinetic Energy Load mass [kg] Effective cushion length ø125 ø100 ø80 ø63 ø50 ø40 ø32 Kinetic energy absorbable J Rod side 31.4 Head side With Air Cushion At the stroke end, when stopping a large amount of kinetic energy generated by a large load and high speed operation, compression of air is used to absorb the impact without transmitting vibration to the surroundings. The purpose of an air cushion is not to reduce the speed of a piston as it nears the stroke end. The kinetic energy of load can be found using the following formula. M Ek = u 2 2 υ Ek: Kinetic energy [J] M M: Mass of load [kg] u: Piston speed [m/s] If the kinetic energy obtained is no greater than the absorbable kinetic energy shown in the table on the left, the life of the cushion seal will be 10 million cycles or more. J Maximum speed [mm/s] Example) Load limit at rod end when the air cylinder ø63 is actuated at 500 mm/s. Extend upward from 500 mm/s on the horizontal axis of the graph to the intersection point with the line for a tube bore size of 63 mm, and then extend leftward from this point to find the load of 80 kg. 443 D- -X

10 1 Series Construction!9!4 i q!2!6!1 e r t!8 u w o!0!7 Component Parts No. Description Material Q ty Note 1 Rod cover Aluminum die-cast 1 Trivalent chromated 2 Head cover Aluminum die-cast 1 Trivalent chromated 3 Cylinder tube Aluminum alloy 1 Hard anodized 4 Piston rod Carbon steel 1 Hard chrome plating 5 Piston Aluminum alloy 1 6 Cushion ring Aluminum alloy 1 Anodized 7 Cushion ring Aluminum alloy 1 Anodized 8 ushing earing alloy 1 9 Cushion valve Steel wire 2 Trivalent zinc chromated 10 Retaining ring Steel for spring 2 ø40 to ø125 No. Description Material Q ty Note 11 Tie-rod Carbon steel 4 Trivalent zinc chromated 12 Tie-rod nut Carbon steel 8 Trivalent zinc chromated 13 Wear ring Resin 1 14 * Rod seal NR 1 15 * Piston seal NR 1 16 * Cushion seal Urethane 2 17 Cushion valve seal NR 2 18* Cylinder tube gasket NR 2 19 Rod end nut Rolled steel 1 Trivalent zinc chromated 20 Magnet (1) Replacement Parts/Seal Kit Kit no Z-PS Z-PS Z-PS Z-PS Z-PS Z-PS PS Contents Set of the nos.!4,!5,!6,!8 * Seal kits consist of items!4,!5,!6,!8, and can be ordered by using the seal kit number corresponding to each bore size. * The seal kit includes a grease pack (10 g for ø32 to ø50, 20 g for ø63 and ø80, 30 g for ø100). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-020 (20 g) 444

11 Square Tube Type Air Cylinder: Standard Type Double Acting, Single Rod 1 Series Standard asic: () ød Width across flats KA øe ød MM Width across flats 1 øe AL A l h H1 H f F K G MA N 2 x Rc P 2 x 4 x J ZZ + Stroke S + Stroke Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. N G Cushion valve W C Rubber umper S ZZ V Port øe C S ZZ J 1 A AL 1 C D E F G H H1 J K KA MA MM N P S V W ZZ M6 x M10 x / M6 x M14 x / M8 x M18 x / M8 x M18 x / M10 x M22 x / M10 x M26 x / M12 x M27 x / With Rod oot (Up to 1000 mm stroke) l h d e f 1 to 51 to 101 to 151 to 201 to 301 to 401 to 501 to 601 to 701 to 801 to 901 to 1 to 51 to 101 to 151 to 201 to 301 to 401 to 501 to 601 to 701 to 801 to 901 to D- -X

12 1 Series Standard/With Mounting racket Refer to asic (page 445) for other dimensions and with rod boot. Axial foot: (L) Cushion valve Port 4 x øld LH LY LT Y X LS + Stroke ZZ + Stroke X Y LX LZ Axial Foot X Y LD LH LS LT LX LY LZ ZZ Rubber umper LS ZZ Rod flange: (F) FE FT Cushion valve Port 4 x øfd øfd FY F FX FZ Rod Flange F FD FE FT FX FY FZ Fd Head flange: (G) Cushion valve Port 4 x øfd FY F ZZ + Stroke FT FX FZ Axial foot, Rod/Head flange Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. 446 Head Flange F FD FT FX FY FZ ZZ Rubber umper ZZ , ,

13 Square Tube Type Air Cylinder: Standard Type Double Acting, Single Rod 1 Series Standard/With Mounting racket * Refer to asic (page 445) for other dimensions and with rod boot. Single clevis: (C) Double clevis: (D) Z + Stroke ZZ + Stroke Single Clevis JN U L CD H10 RR Hole dia.: CD H10 Shaft dia.: CD d9 Cushion valve Cushion valve CX C Port Port 4 x olt C C JN L RR U CD H10 CX Z * ZZ * olt 4 x olt C (M6 x 1 x 16L, Low head) C (M8 x 1.25 x 18L, Low head) C (M10 x 1.5 x 22L, Low head) M12 x 1.75 x 28L, Low head Rubber umper Z ZZ , , J 1 C Z + Stroke ZZ + Stroke JN U L RR CX CZ C Double Clevis C JN L RR U CD H10 CX CZ Z* ZZ* olt C (M6 x 1 x 16L, Low head) C (M8 x 1.25 x 18L, Low head) C (M10 x 1.5 x 22L, Low head) M12 x 1.75 x 28L, Low head Rubber umper Z ZZ , , Single/Double clevis * Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. 447 D- -X

14 1 Series Pivot racket/double Clevis Pivot racket Part No. l32 l40 l50 l63 l80 l100 l125 Description Double clevis pivot bracket Double clevis pivot bracket Z + Stroke D DX A 90 DD 4 x ødt DH DS DU DL DA 4 x ødr DU DO DC DE DO Part no. DA D DL DU DC DX DE DO DR DT DS DH Z DDH Rubber umper Z Rotating Angle A A , , , Clevis pivot bracket Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. 448

15 Square Tube Type Air Cylinder: Standard Type Double Acting, Single Rod 1 Series Dimensions of Accessories Rod end nut (Standard) 30 d Knuckle joint pin Clevis pin 2 x ød ødd9 I type Single knuckle joint H D MM NDH10 øe1 A1 racket Combinations racket for cylinder racket for workpiece Single clevis L1 A 45 U1 C RR1 Double clevis NX Single knuckle joint Part no. d H C D NT M10 x NT M14 x NT-05 50, 63 M18 x NT M22 x NT M26 x NT-12M 125 M27 x Part no. A A1 E1 L1 MM R1 U1 NDH10 NX I-03M M10 x I-04M M14 x I-05M 50, M18 x I-08M M22 x I-10M M26 x I-12M M27 x Double knuckle joint m l L Part no. Dd9 L l m d Clevis Knuckle (Drill through) Split pin CD-M03 Note) 32, ø3 x 18 l CD-M05 Note) 50, ø4 x 25 l CD-M08 Note) 80, ø4 x 35 l IY ø4 x 40 l Note) Split pins and flat washers are included. Y type Double knuckle joint racket combination available Refer to the figure below. øe1 MM øndh10 Part no. E1 L1 MM R1 U1 NDH10 NX NZ Y-03M M10 x Y-04M M14 x Y-05M 50, M18 x Y-08M M22 x Y-10M M26 x Y-12M M27 x Note) A pin, split pins, and flat washers are included. Clevis pivot bracket Single clevis q w Double clevis e r o Single knuckle joint t y Double knuckle joint u i!0 L1 U1 RR1 NX NZ J 1 No. Appearance No. Appearance Single clevis + Double clevis Single knuckle joint + Double knuckle joint q y Single clevis + Double knuckle joint Double knuckle joint + Single clevis w u Double clevis + Single clevis Double knuckle joint + Single knuckle joint e i Double clevis + Single knuckle joint Double clevis + Clevis pivot bracket r o t Single knuckle joint + Double clevis!0 Double knuckle joint + Clevis pivot bracket 449 D- -X

16 Square Tube Type Air Cylinder: Standard Type Double Acting, Double Rod 1W Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS How to Order 1W L Z With auto switch MD1W L Z M9W With auto switch (uilt-in magnet) mm mm mm mm mm mm mm Mounting type asic L Axial foot F Rod flange * Mounting bracket is shipped together with the product, but not assembled (except ø125). uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) MD1W40-100Z Port thread type Nil Rc TN NPT TF G Cylinder stroke Refer to Standard Strokes on page 451. Suffix (Cushion) Nil Air cushion N* Rubber bumper * Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. Suffix (Rod boot) Nil None J Nylon tarpaulin (One end) JJ Nylon tarpaulin (oth ends) K Heat resistant tarpaulin (One end) KK Heat resistant tarpaulin (oth ends) Made to Order For details, refer to page 451. Number of auto switches Nil 2 pcs. S 1 pc. 3 3 pcs. n n pcs. Auto switch Nil Without auto switch * For applicable auto switches, refer to the table below. Applicable Auto Switches/Refer to pages 1575 to 1701 for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (2-color indicator) Water resistant (2-color indicator) Electrical entry Indicator light Wiring (Output) Load voltage Auto switch model Lead wire length [m] DC AC Perpendicular In-line Pre-wired connector (Nil) (M) (L) (Z) M9NV M9N V V V v v *1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. *2 1 m type lead wire is only applicable to the D-A93. * Lead wire length symbols: 0.5 m Nil (Example) M9NW * Solid state auto switches marked with v are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ * Since there are other applicable auto switches than listed above, refer to page 461 for details. * For details about auto switches with pre-wired connector, refer to pages 1648 and * Auto switches are shipped together, (but not assembled). 450 Applicable load 3-wire (NPN) 3-wire (PNP) 5 V, 12 V M9PV M9P V V V v v IC circuit 2-wire 12 V M9V M9 V V V v v 3-wire (NPN) M9NWV M9NW V V V v v 5 V, 12 V Grommet Yes 3-wire (PNP) 24 V M9PWV M9PW V V V v v IC circuit 2-wire 12 V M9WV M9W V V V v v 3-wire (NPN) M9NAV*1 M9NA*1 v v V v v 5 V, 12 V 3-wire (PNP) M9PAV*1 M9PA*1 v v V v v IC circuit 2-wire 12 V M9AV*1 M9A*1 v v V v v 3-wire 5 V A96V A96 V V IC circuit Yes (NPN equivalent) Grommet 100 V A93V*2 A93 V V V V Relay, 2-wire 24 V 12 V No 100 V or less A90V A90 V V IC circuit PLC Relay, PLC

17 Square Tube Type Air Cylinder: Standard Type Double Acting, Double Rod 1W Series Specifications Symbol Air cushion Made to Order: Individual Specifications (For details, refer to page 462.) Symbol Specifications -X846 Fastener strips mounted on switch mounting grooves Made to Order (For details, refer to pages 1703 to 1896.) Symbol Specifications -XAl Change of rod end shape -X6 Heat resistant cylinder ( 10 to 150 C) *1 *2 -XC3 Special port location *3 -XC4 With heavy duty scraper *2 -XC5 Heat resistant cylinder ( 10 to 110 C) *1 *2 Tie-rod, cushion valve, tie-rod nut, etc. -XC7 made of stainless steel *2 -XC22 Fluororubber seal *2 With split pins for double clevis pin/double -XC26 knuckle joint pin and flat washers *4 -XC30 Rod trunnion *2 -XC35 With coil scraper *2 Made of stainless steel -XC65 (Combination of XC7 and XC68) *2 -XC68 Piston rod and rod end nut made of stainless steel *2 (with hard chrome plated piston rod) *1 Air cushion only *2 Except ø125 *3 The cover shape is the same as the current product. *4 ø125 only For special port location (-XC3), the mounting bracket and port location can be determined using the standard product corresponding to the operating conditions. Also, this is only applicable to -XC3, -XC3CC and -XC3DD with trunnion bracket. Action Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Lubrication Double acting, Double rod Note) Kinetic energy absorbable by the cushion mechanism is identical to double acting, single rod. Air 1.5 MPa 1.0 MPa 0.05 MPa Without auto switch: 10 to 70 C (No freezing) With auto switch: 10 to 60 C Not required (Non-lube) Piston speed 50 to 1000 mm/s 50 to 700 mm/s Stroke length tolerance Up to 250: , 251 to 1000: 0 Cushion Note) Air cushion or Rubber bumper Port size (Rc, NPT, G) 1/8 1/4 3/8 1/2 Mounting asic, Axial foot, Rod flange Standard Strokes ore size Standard stroke Stroke range q Max. manufacturable Stroke range w stroke 32 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600 Up to 1800 Up to , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 1000 Up to 2000 Note 1) Intermediate strokes are available. (No spacer is used.) Note 2) Applicable strokes should be confirmed according to the usage. For details, refer to Air Cylinders Model Selection on front matter pages. In addition, the products that exceed the stroke range q might not be able to fulfill the specifications due to the deflection etc. Note 3) Please consult with SMC for manufacturability and the part numbers when exceeding the stroke range w. Accessories Mounting asic Axial foot Rod flange Standard Rod end nut V V V Option * Refer to page 449 for part numbers and dimensions. (Refer to page 454 for rod boot.) Mounting rackets/part No. Single knuckle joint V V V Double knuckle joint (with pin) V V V Rod boot V V V J 1 Refer to pages 460 and 461 for cylinders with auto switches. Auto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range Auto switch mounting brackets/part no. Note) Order two foots per cylinder Axial foot -L03 -L04 -L05 -L06 -L08 -L10 -L12 Rod flange -F03 -F04 -F05 -F06 -F08 -F10 -F12 Rod oot Material Symbol Rod boot material Max. ambient temperature J Nylon tarpaulin 70 C K Heat resistant tarpaulin 110 C * * Max. ambient temperature for rod boot itself. 451 D- -X

18 1W Series Theoretical Force Rod diameter Operating Piston area direction [mm 2 ] (Unit: N) OUT IN Operating pressure [MPa] IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT Note) Theoretical force [N] = Pressure [MPa] x Piston area [mm2] Weights asic weight asic Axial foot Rod flange Additional weight per 50 mm of stroke All mounting brackets Calculation Example) 1W32-100Z (asic, ø32, 100 stroke) asic weight 0.59 kg Additional weight 0.21/50 stroke Cylinder stroke 100 stroke x 100/50 = 1.01 kg [kg] 452

19 Square Tube Type Air Cylinder: Standard Type Double Acting, Double Rod 1W Series Construction!6!1 y q!0!3 o w e t!2!7 r!5 Component Parts No. Description Material Q ty Note 1 Rod cover Aluminum die-cast 2 Trivalent chromated 2 Cylinder tube Aluminum alloy 1 Hard anodized 3 Piston rod Carbon steel 1 Hard chrome plating 4 Piston Aluminum alloy 1 5 Cushion ring Aluminum alloy 2 Anodized 6 ushing earing alloy 2 7 Cushion valve Steel wire 2 Trivalent zinc chromated 8 Retaining ring Steel for spring 2 ø40 to ø125 9 Tie-rod Carbon steel 4 Trivalent zinc chromated Replacement Parts/Seal Kit Kit no. 32 W32Z PS 40 1W40Z PS 50 1W50Z PS 63 1W63Z PS 80 1W80Z PS 100 1W100Z PS 125 W125 PS Contents Set of the nos.!1,!2,!3,!5 Seal kits consist of items!1,!2,!3,!5, and can be ordered by using the seal kit number corresponding to each bore size. The seal kit includes a grease pack (10 g for ø32 to ø50, 20 g for ø63 and ø80, 30 g for ø100). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-020 (20 g) u i!4 No. Description Material Q ty Note 10 Tie-rod nut Carbon steel 8 Trivalent zinc chromated 11 Rod seal NR 2 12 Piston seal NR 1 13 Cushion seal Urethane 2 14 Cushion valve seal NR 2 15 Cylinder tube gasket NR 2 16 Rod end nut Rolled steel 2 Trivalent zinc chromated 17 Magnet (1) J D- -X

20 1W Series Standard asic: () Width across flats KA Width across flats 1 G 2 x Rc P G Width across flats 1 Width across flats KA Cushion valve Port V W øe øe ød ød øe C l f h With rod boot MM H1 MA AL F N A K H 2 x 4 x J N S + Stroke ZZ + 2 x Stroke F H + Stroke AL A H1 MM C G 2 x Rc P G ød øe ød ød øe ød ød øe K Width across flats KA Width across flats 1 Width across flats KA Width across flats 1 MM H1 AL 10.2 A AL l f N N f l + Stroke 10.2 K K A h S + Stroke h + Stroke ZZ + 2 x Stroke H1 MM A AL 1 C D E F G H H1 J K KA MA MM N P S * V W ZZ * M6 x M10 x / M6 x M14 x / M8 x M18 x / M8 x M18 x / M10 x M22 x / M10 x M26 x / M12 x M27 x / With Rod oot (Up to 1000 mm stroke) l d e f 1 to to to 151 to 201 to 301 to 401 to 501 to 601 to 701 to 801 to 901 to ZZ Note) 101 to 151 to 201 to 301 to 401 to 501 to 601 to 701 to 801 to 901 to to 51 to Note) ZZ indicates dimensions for double side rod boot. 1 to to 100 Rubber umper S ZZ h 101 to 151 to 201 to 301 to 401 to 501 to 601 to 701 to 801 to 901 to * Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. 454

21 Square Tube Type Air Cylinder: Standard Type Double Acting, Double Rod 1W Series Standard/With Mounting racket * Dimensions not indicated are the same as the basic type, double acting, single rod (page 445). Axial foot: (L) Port Cushion valve LH LY Axial Foot LT Y X LS + Stroke X Y LD LH LS * LT LX LY LZ Rubber umper LS X 4 x øld Y LX LZ * Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm, ø125: +12 mm. J Rod flange: (F) 1 FE FT 4 x øfd Port Cushion valve øfd FY F Rod Flange F FD FT FX FY FZ Fd FX FZ D- -X 455

22 Square Tube Type Air Cylinder: Non-rotating Rod Type Double Acting, Single Rod 1K Series ø32, ø40, ø50, ø63, ø80, ø100 RoHS How to Order 1K Z With auto switch MD1K Z M9W L F G C D With auto switch (uilt-in magnet) Mounting type asic Axial foot Rod flange Head flange Single clevis Double clevis * Mounting bracket is shipped together with the product, but not assembled. Port thread type Nil Rc TN NPT TF G * Refer to Ordering Example of Cylinder Assembly on page 441. uilt-in Magnet Cylinder Model mm mm mm mm mm mm If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (Example) MD Z Cylinder stroke Refer to Standard Strokes on page 457. Suffix (Rod boot) Nil None J Nylon tarpaulin K Heat resistant tarpaulin Suffix (Cushion) Nil Air cushion N * Rubber bumper * Since the bumpers are attached to the both sides of the piston for rubber bumper type, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm. Nil N Accessories 1 No bracket Pivot bracket * Only for D mounting type. * Pivot bracket is shipped together with the product. * Refer to page 448 for pivot bracket. Applicable Auto Switches/Refer to pages 1575 to 1701 for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (2-color indicator) Water resistant (2-color indicator) Electrical entry Indicator light Wiring (Output) Made to Order For details, refer to page 457. Number of auto switches Nil 2 pcs. S 1 pc. 3 3 pcs. n n pcs. Auto switch Nil Without auto switch * For applicable auto switches, refer to the table below. Accessories 2 Nil No bracket V Single knuckle joint W Double knuckle joint * A knuckle joint pin is not provided with the single knuckle joint. * Rod end bracket is shipped together with the product. * The screw-in amount of the piston rod end cannot be adjusted when a clevis bracket, trunnion bracket and knuckle joint are used together. Load voltage Auto switch model Lead wire length [m] DC AC Perpendicular In-line Pre-wired connector (Nil) (M) (L) (Z) M9NV M9N V V V v v *1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. *2 1 m type lead wire is only applicable to the D-A93. * Lead wire length symbols: 0.5 m Nil (Example) M9NW * Solid state auto switches marked with v are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ * Since there are other applicable auto switches than listed above, refer to page 461 for details. * For details about auto switches with pre-wired connector, refer to pages 1648 and * Auto switches are shipped together, (but not assembled). 456 Applicable load 3-wire (NPN) 3-wire (PNP) 5 V, 12 V M9PV M9P V V V v v IC circuit 2-wire 12 V M9V M9 V V V v v 3-wire (NPN) M9NWV M9NW V V V v v 5 V, 12 V Grommet Yes 3-wire (PNP) 24 V M9PWV M9PW V V V v v IC circuit 2-wire 12 V M9WV M9W V V V v v 3-wire (NPN) M9NAV*1 M9NA*1 v v V v v 5 V, 12 V 3-wire (PNP) M9PAV*1 M9PA*1 v v V v v IC circuit 2-wire 12 V M9AV*1 M9A*1 v v V v v 3-wire 5 V A96V A96 V V IC circuit Yes (NPN equivalent) Grommet 100 V A93V*2 A93 V V V V Relay, 2-wire 24 V 12 V No 100 V or less A90V A90 V V IC circuit PLC Relay, PLC

Square Tube Type Air Cylinder: Non-rotating Rod Type Double Acting, Single Rod 1K Series Specifications 32 40 50 63 80 100 Action Double acting, Single rod Symbol Air cushion Fluid Proof pressure Air

23 Square Tube Type Air Cylinder: Non-rotating Rod Type Double Acting, Single Rod 1K Series Specifications Action Double acting, Single rod Symbol Air cushion Fluid Proof pressure Air 1.5 MPa Maximum operating pressure Minimum operating pressure 1.0 MPa 0.05 MPa Ambient and fluid temperature Without auto switch: 10 to 70 C (No freezing) With auto switch: 10 to 60 C Made to Order (For details, refer to pages 1703 to 1896.) Symbol Specifications -XAl Change of rod end shape -XC3 Special port location * -XC6 Piston rod and rod end nut made of stainless steel -XC7 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel -XC8 Adjustable stroke cylinder/adjustable extension type -XC9 Adjustable stroke cylinder/adjustable retraction type -XC10 Dual stroke cylinder/double rod type -XC27 Double clevis and double knuckle joint pins made of stainless steel -XC30 Rod trunnion * The cover shape is the same as the current product. Mounting rackets/part No. Made to Order: Individual Specifications (For details, refer to page 462.) Symbol Specifications -X846 Fastener strips mounted on switch mounting grooves For special port location (-XC3), the mounting bracket and port location can be determined using the standard product corresponding to the operating conditions. Also, this is only applicable to -XC3, -XC3CC and -XC3DD with trunnion bracket Axial foot Note 1) -L03 -L04 -L05 Rod/Head flange -F03 -F04 -F05 Single clevis -C03 -C04 -C05 Double clevis -D03 -D04 -D Axial foot Note 1) -L06 -L08 -L10 Rod/Head flange -F06 -F08 -F10 Single clevis -C06 -C08 -C10 Double clevis -D06 -D08 -D10 Note 1) Order two foots per cylinder. Note 2) Accessories for each mounting bracket are as follows. Axial foot, Rod/Head flange, Single clevis/ ody mounting bolt; Double clevis/ody mounting bolt, Clevis pin, Split pins and Flat washers. Refer to page 449 for details. Refer to pages 460 and 461 for cylinders with auto switches. Auto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range Auto switch mounting brackets/part no. Lubricant Piston speed Non-lube 50 to 1000 mm/s Stroke length tolerance Note) Up to 250: , 251 to 1000: , 1001 to 1500: Cushion Air cushion or Rubber bumper Port size (Rc, NPT, G) 1/8 1/4 3/8 1/2 Mounting asic, Axial foot, Rod flange, Head flange, Single clevis, Double clevis Non-rotating accuracy ±0.5 ±0.3 Allowable rotating torque N m or less Note) Kinetic energy absorbable by the cushion mechanism is identical to double acting, single rod. Accessories Standard Option Mounting asic Axial foot Rod flange Head flange Single clevis Double clevis Rod end nut V V V V V V Clevis pin V Single knuckle joint V V V V V V Double knuckle joint (with pin) V V V V V V Rod boot V V V V V V * Refer to page 449 for part numbers and dimensions. (Refer to page 445 for rod boot.) Standard Strokes Standard stroke 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800 Manufacture of intermediate strokes is possible. (Spacers are not used.) Rod oot Material Symbol Material Max. ambient temp. J Nylon tarpaulin 70 C K Heat resistant tarpaulin 110 C * * Max. ambient temperature for rod boot itself. Theoretical Force OUT side is identical to double acting, single rod. Refer to the table below for IN side. Piston area [mm 2 ] Piston area [mm 2 ] Theoretical force [N] = Pressure [MPa] x Piston area [mm 2 ] 457 J 1 D- -X

24 1K Series Weights Calculation Example) 1K (asic, ø32, 100 stroke) asic weight 0.53 kg Additional weight 0.16/50 stroke Cylinder stroke 100 stroke x 100/50 = 0.85 kg asic Axial foot asic weight Rod/Head flange Single clevis Double clevis Additional weight per 50 mm of stroke All mounting brackets Single knuckle joint Accessories Double knuckle joint (with pin) [kg] Construction Width across flats!9!4 q!2!6!1 e r t!8 w u o!0!7 Rod view ø32 Component Parts No. Description Material Q ty Note 1 Rod cover Aluminum die-casted 1 Trivalent chromated 2 Head cover Aluminum die-casted 1 Trivalent chromated 3 Cylinder tube Aluminum alloy 1 Hard anodized 4 Piston rod Stainless steel 1 5 Piston Aluminum alloy 1 6 Cushion ring Rolled steel 2 Zinc chromated 7 Piston nut Rolled steel 1 Zinc chromated 8 Non-rotating guide earing alloy 1 9 Cushion valve Steel wire 2 Trivalent zinc chromated 10 Retaining ring Spring steel 2 ø40 to ø Tie-rod Carbon steel 4 Trivalent zinc chromated No. Description Material Q ty Note 12 Tie-rod nut Carbon steel 8 Trivalent zinc chromated 13 Wear ring Resin 1 14 Rod seal NR 1 15 Piston seal NR 1 16 Cushion seal Urethane 2 17 Cushion valve seal NR 2 18 Cylinder tube gasket NR 2 19 Rod end nut Rolled steel 1 Trivalent zinc chromated 20 Magnet (1) 21 Hexagon socket head set screw Steel wire 2 Trivalent black zinc chromated Replacement Parts/Seal Kit Kit no. 32 K32Z-PS 40 K40Z-PS 50 K50Z-PS 63 K63Z-PS 80 K80Z-PS Contents Set of the nos.!4,!5,!6,!8 100 K100Z-PS Seal kits consist of items!4,!5,!6,!8, and can be ordered by using the seal kit number corresponding to each bore size. The seal kit includes a grease pack (10 g for ø32 to ø50, 20 g for ø63 and ø80, 30 g for ø100). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-010 (10 g), GR-S-020 (20 g) Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø32, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø100: +10 mm 458

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT. ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.