Compact Guide Cylinder Series MGQ

Size: px

Start display at page:

Download "Compact Guide Cylinder Series MGQ"

Opal Greene
6 years ago
Views:

Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder.

Can be mounted from two directions Bottom mounting Side mounting Two types of guide rod bearing for different applications Slide bearing Slide bearing Strength against side load is more than times as

1 Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers or lifters in conveyor line. Pusher Stopper ifter Cylinder position can be detected. ll models have built-in magnets for auto switches. Can be mounted from two directions Bottom mounting Side mounting Two types of guide rod bearing for different applications Slide bearing Slide bearing Strength against side load is more than times as compared conventional stopper cylinder (Compared to SMC Series RSQ, round bar type). Ball bushing bearing Smooth operation is suitable for pushing, lifter and applications where high precision is required. Non-rotating accuracy 0 Non-rotating accuracy θ ±0.0 ±0.07 ±0.0 ±0.0 ±0.0 uto switches, lead wires and terminals can be fixed in the groove of cylinder body. Terminal Band (Except ø, ø, ø, ø) ±0. ±0.0 ±0.0 ±0.0 ±0.0 MGJ MGP MGG MGC MGF MGZ MGT D- Individual 337

2 Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 How to Order Compact Guide Cylinder M MBW Made to Order (Refer to page 33 for details.) Compact Guide Cylinder M Bearing type Slide bearing Ball bushing bearing mm mm mm mm mm 0 mm mm mm mm 0 mm uto switch Nil Cylinder stroke Number of auto switches Nil pcs. S n n pcs. Without auto switch (Built-in magnet) For the applicable auto switch model, refer to the table below. Refer to Standard Stroke on page 33. Thread type Nil M x 0. ø, ø Rc TN NPT ø to ø0 TF G pplicable uto Switch/Refer to pages 171 to 17 for further information on auto switches. Type Solid state switch Reed switch Special function Electrical entry Indicator light Wiring (Output) 3-wire (NPN) 3-wire (PNP) -wire Grommet Yes V 3-wire (NPN) Diagnostic indication 3-wire (PNP) (-color indication) -wire 3-wire Yes (NPN equivalent) Grommet No -wire V ead wire length symbols: 0. m Nil (Example) MNW 1 m M (Example) MNWM 3 m (Example) MNW m Z (Example) MNWZ Since there are other applicable auto switches than listed, refer to page 31 for details. For details about auto switches with pre-wired connector, refer to pages 17 and 17. uto switches are shipped together (not assembled). oad voltage uto switch model ead wire length (m) Pre-wired connector pplicable load DC C Perpendicular In-line (Nil) (M) () (Z) MNV MN IC V, V MPV MP circuit V MBV MB Relay, MNWV MNW IC PC V, V MPWV MPW circuit V MBWV MBW IC V V circuit 0V 3V 3 Relay, V 0 V or less 0V 0 IC circuit PC Solid state auto switches marked with are produced upon receipt of order. 33

3 Compact Guide Cylinder Series ir cylinder integrated with guide has achieved antilateral load and high nonrotating accuracy. Space-saving and compact design Suitable as stoppers or lifters in conveyor line types of guide rod bearing are available depending upon the application Slide bearing/ball bushing bearing Specifications Bearing type Model ction Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Piston speed Cushion ubrication Stroke length tolerance ø, ø ø to ø0 ø to ø ø, ø0 Slide bearing,,,,,,,,, 0 Double acting ir 1. MPa 1.0 MPa 0. MPa 0.1 MPa to 0 C (No freezing) to 0 mm/s to 0 mm/s Rubber bumper on both ends Non-lube mm Ball bushing bearing Standard Stroke Model M,, M,,, 0 M Standard stroke,,,,, 7, 0,,,, 7, 0 1, 1, 17, 0,, 7, 0, 1 1, 17, 0 Intermediate stroke s for the intermediate strokes other than the standard strokes at left are manufactured by means of installing a spacer. ø to ø Stroke available by the 1 stroke interval ø to ø0 Stroke available by the stroke interval (Example) 1. For - st, - st is provided with a mm + mm mm width spacer.. For - st, - st is provided with a mm width spacer. MGJ MGP Symbol X XB XB XB XC XC XC7 X X37 X3 X Made to Order Specifications (For details, refer to pages 1 to.) Specifications Change of rod end shape Heat resistant cylinder ( to 1 C) ow speed cylinder ( to mm/s) Intermediate stroke (Using exclusive body) Fluororubber seals With knock pin holes Machining tapped hole, drilled hole, and pin hole additionally Helical insert thread Bottom mounting style ong bushing type With anti-strong magnetic field switch (D-PDW) Theoretical Output Bore size Rod size Operating direction Piston area (mm ) Operating pressure (MPa) OUT(N) (N) (N) MGG MGC MGF MGZ MGT Note) Theoretical output (N) = Pressure (MPa) x Piston area (mm ) D- Individual 33

4 Series Mass/Slide Bearing: to 0 (kg) Model Standard stroke Mass/Ball Bushing Bearing: to 0 (kg) Model Standard stroke Copper and Fluorine-free Series (For CRT manufacturing process) To prevent the influence of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used in the component parts. Specifications pplicable series Bearing type Slide bearing Ball bushing bearing,,,,,,,, 0 How to Order M Stroke Bearing type M Slide bearing Ball bushing bearing Port thread type Copper and fluorine-free 3

5 Series Specific Product Precautions Be sure to read before handling. Refer to front matters and 3 for Safety Instructions and pages 3 to for ctuator and uto Switch Precautions. Warning Mounting 1. void placing your hands or fingers between the plate and the body. Be very careful to prevent your hands or fingers from getting caught in the gap between the cylinder body and the plate when air is applied. Caution 1. Do not scratch or gouge the sliding portion of the piston rod and the guide rod. Damaged seals, etc. will result in leakage or malfunction.. Do not dent or scratch the mounting surface of a body and a plate. The flatness of the mounting surface may not be maintained, which would cause the sliding resistance to increase. 3. Make sure that the cylinder mounting surface has a flatness of 0.0 mm or less. If the flatness of the workpieces and brackets mounted on the plate is not appropriate, sliding resistance may increase.. When mounting on the bottom of the cylinder, the guide rod protrudes from the bottom at the retraction stroke end. Therefore, drill holes for the hexagon socket bolts used for mounting purposes, and relief holes for the guide rods. Moreover, in applications where impact occurs from a stopper, etc., the mounting bolts should be inserted to a depth of d or more. llowable Kinetic Energy oad mass and cylinder speed should be observed within the range given in the graph below. with a rubber bumper oad mass (kg) ø0 ø ø ø ø ø ø ø ø ø B C±0. ±0. ±0. C B±0. B±0. d or more (d=thread O.D.) ød By-pass port dia. ød ød By-pass port dia C dimension for a bore size of to 0 is identical to the dimension. Hexagon socket head cap screw M x 0.7 M x 0. M x 0. M x 1 M x 1. M x 1. M x 1. M x 1. M x 1.7 M1 x oad mass (kg) Max. speed (mm/s) without a cushion (XB, XC) ø0 ø ø ø ø ø ø ø ø ø Max. speed (mm/s) MGJ MGP MGG MGC MGF MGZ MGT D- Individual

6 0 Bearing type Stroke F(N) 0 Bearing type Stroke T (N. m) 0 ±0.0 ±0.07 ±0.0 ±0.0 ±0.0 ±0. ±0.0 ±0.0 ±0.0 ±0.0 Non-rotating accuracy θ Operating Conditions llowable ateral oad (Ordinary load) llowable Rotational Torque of Plate Non-rotating ccuracy of Plate Torque: T (N m) For non-rotating accuracy θ without load, use a value no more than the values in the table as a guide. 3 Series

7 Compact Guide Cylinder Series Operating Range when Used as Stopper Bore Size ø to ø/ to (Slide Bearing) l mm l mm to (Slide bearing) 0 ø 70 When selecting a model with a longer l dimension, be sure to choose a bore size which is sufficiently large. Caution on handling Note 1) When using as a stopper, select a model with stroke or less. Note ) Model (Ball bushing bearing) cannot be used as a stopper. Mass of transferred object m (kg) 0 ø ø ø 0 Transfer speed υ (m/min) Bore Size ø to ø0/ to 0 (Slide Bearing) to 0 (Slide bearing) l mm l mm 10 ø0 MGJ MGP MGG MGC MGF MGZ MGT When selecting a model with a longer l dimension, be sure to choose a bore size which is sufficiently large. Caution on handling Note 1) When using as a stopper, select a model with stroke or less. Note ) Model (Ball bushing bearing) cannot be used as a stopper. Mass of transferred object m (kg) ø ø ø ø ø D- Individual Transfer speed υ (m/min) 33

8 Series Operating Range when Used as ifter Select the bore size so that the total load mass is bellow the theoretical output (see the table below).,, to 0 Theoretical output % or below % or below 0% or below l m l m /Slide bearing /Ball bushing bearing to - to - (,, Stroke) to -Over stroke Eccentric distance l Eccentric distance l Eccentric distance l to 0 (Slide bearing) to 0- (, stroke) to 0-Over stroke oad mass m (kg) oad mass m (kg) oad mass m (kg) oad mass m (kg) oad mass m (kg) oad mass m (kg) Eccentric distance l Eccentric distance l Eccentric distance l 3

9 Series Construction/Series to ø, ø stroke or less ø, ø Over stroke to Over stroke Component Parts No. Description Material Note 1 3 Body Piston Piston rod Collar Bushing luminum alloy luminum alloy Stainless steel Carbon steel luminum bearing alloy luminum alloy casted Babbitt Hard anodized Chromated 7 Head cover Guide rod Plate Plate mounting bolt Guide bolt luminum alloy Carbon steel Carbon steel Carbon steel Carbon steel Replacement Parts: Seal Kit Kit no. ø to ø ø to ø0 ø to ø ø to ø0 ø to ø0 ø to ø ø to ø0 Hard chrome plated White anodized Painted Chromated Painted Hard chrome plated Nickel plated Nickel plated Nickel plated Description Description Material Note Carbon tool steel Carbon tool steel Urethane Urethane Retaining ring Retaining ring Bumper Bumper B Magnet Slide Bearing Felt Holder Ball bushing Piston seal Rod seal Gasket Gasket B 0 Kit no. Babbitt Felt Resin NBR NBR NBR NBR Phosphate coated Phosphate coated Description -PS -PS -PS -PS -PS set of,, and 3 listed above -PS -PS -PS -PS 0-PS set of,, and 3 listed above Seal kit includes to 3. Order the seal kit, based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-0 ( g) 3 No

10 Compact Guide Cylinder Series Construction/Series to 1 ø, ø Over stroke stroke or less ø, ø Over stroke to 0 1 MGJ MGP MGG MGC ø or more MGF MGZ MGT D- Individual 37

11 Series Bore Size ø to ø:, x YY depth Y Z W + Stroke R T ødb ød U V H PW X x NN through x P x MM depth M T Q S TB G GB C + Stroke B + Stroke + Stroke E J G K, Common Dimensions Standard stroke,,,,, 7, 0,,,, 7, 0 1, 1, 17, 0 B C D G 33 3 G.. GB 7.. H 7 J 1 1 K 17 1 MM M x 0.7 M x 0. M x 0. M x 1.0 M NN M x 0.7 M x 0. M x 0. M x 1.0 Nil M x 0. M x 0. Rc1/ Rc1/ P TN NPT1/ NPT1/ TF G1/ G1/ PW 7 7 Q 1 1 R 0 70 S 3 T 7 T. TB. U 3 3 V W 7 X 7 YY M x 0.7 M x 0. M x 0. M x 1.0 Y 7 Z 1 (Slide bearing)/, DB, E Dimensions st or less Over st 1. DB E st or less Over st (Ball bushing bearing)/, DB, E Dimensions st or less 3 7. Over st 7 7. Note) For intermediate strokes other than standard strokes, refer to the Manufacture of Intermediate Stroke on page 33. and are only for the M x 0. port. For bore size or more, Rc, NPT and G ports can be selected. (Refer to page 33.) 3 DB E st or less Over st 7

12 R T ødb ød PW X V H Compact Guide Cylinder Series Bore Size ø to ø0:, x YY depth Y x NN through Z W + Stroke x MM depth M x P T Q S TB, Common Dimensions 0 0 Standard stroke,, 7, 0 1,1 17, 0 T T TB B V W C 37.. X D F YY M x 1. M x 1. M x 1. M x 1. M x 1.7 M1 x G Y. 1 G Z F GB G GB C + Stroke B + Stroke + Stroke H J 3... K (Slide bearing)/, DB, E Dimensions DB 3 MM M x 1. M x 1. M x 1. M x 1. M x 1.7 M1 x E E M 3 J (Ball bushing bearing)/, DB, E Dimensions 0 NN M x 1. M x 1. M x 1. M x 1. M x 1.7 M1 x Nil Rc1/ Rc1/ Rc1/ Rc1/ Rc3/ Rc3/ st or less Note) For intermediate strokes other than standard strokes, refer to the Manufacture of Intermediate Stroke on page 33. Rc, NPT and G ports can be selected. (Refer to page 33.) G K P TN NPT1/ NPT1/ NPT1/ NPT1/ NPT3/ NPT3/ Over st TF G1/ G1/ G1/ G1/ G3/ G3/ DB PW st or less Q 0 E R S Over st MGJ MGP MGG MGC MGF MGZ MGT Grooves (Except ø, ø, ø, ø) Use grooves section a and section b in the figure below of the cylinder body for firmly fixing in the following case. (pplicable bolt size is M3.) These grooves can be used for firmly fixing the tying bands of lead wires of the auto switch, etc., and also terminal boards, etc., to the main body of the cylinder. When the terminal block is fixed on a cylinder directly. 1. a. 3.1 Detailed figure of a section a Detailed figure of b section b b Model 0 D- Individual to to 0 3

13 Series Minimum Stroke for uto Switch uto switch model D- D- V D-M V D-M D-M W D-M WV D-Z7 D-Z D-Y D-Y7P D-Y D-Y7PV D-Y7 W D-Y7 WV No. of auto switches mounted pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. ø ø ø ø ø ø ø ø ø ø0 uto Switch Proper Mounting Position (Detection at Sroke End) B uto switch Hs uto Switch Proper Mounting Position uto switch model Bore size 0 D-M D-M V D-M W D-M WV B D- D- V B D-Z7 /Z D-Y /Y7P D-Y /Y7PV D-Y7 W D-Y7 WV B Note) djust the auto switch after confirming the operating conditions in the actual setting. uto Switch Mounting Height uto switch model Bore size 0 D- D-M D-M W D-Z7 D-Z D-Y D-Y7P D-Y7 W Hs D- V Hs D-M V D-M WV Hs D-Y D-Y7PV D-Y7 WV Hs

14 Compact Guide Cylinder Series Operating Range uto switch model D- / V D-M /M V D-M W/M WV D-Z7 /Z D-Y /Y /Y Since the operating range is provided as a guideline including hysteresis, it cannot be guaranteed (assuming approximately ±% dispersion). It may vary substantially depending on an ambient environment uto Switch Mounting Bracket: Part No. uto switch model D- / V D-M /M V D-M W/M WV ø to ø0 BMG-0 D- (V)/M (V)/M W(V) BMG-0 Other than the applicable auto switches listed in How to Order, the following auto switches can be mounted. For detailed specifications, refer to pages 171 to 17. uto switch type Model Electrical entry (Fetching direction) Features Reed Solid state D-Z73, Z7 Grommet (In-line) D-Z Without indicator light D-Y, YB, Y7PV Grommet (Perpendicular) D-Y7NWV, Y7PWV, Y7BWV Diagnostic indication (-color indication) D-Y, YB, Y7P Grommet (In-line) D-Y7NW, Y7PW, Y7BW Diagnostic indication (-color indication) For solid state auto switches, auto switches with a pre-wired connector are also available. Refer to pages 17 and 17 for details. Normally closed (NC = b contact), solid state auto switch (D-FG/FH/Y7G/Y7H type) are also available. For details, refer to pages 17 and 17. MGJ MGP MGG MGC MGF MGZ MGT D- Individual 31

Compact Guide Cylinder

Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers