Guide Table. Series MGF
|
|
- Mark Henderson
- 6 years ago
- Views:
Transcription
1 Guide Table Series MGF ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder enables compact machine design. Mounting height Built-in non-rotating mechanism Internal guide pin prevents rotation. Non-rotating accuracy Bore size 0 Reduction by 1 to % (Compared to SMC Series MGQ) Large diameter guide (Eccentric load resistant) A large diameter guide rod enables the cylinder to handle eccentric loads applied from any direction within a 60 angle. Allowable moment Bore size 0 Values are at a cylinder speed of 0 mm/s. Series Variations Model MGF MGF MGF0 Bore size 0 Built-in T-slots Standard stroke Auto switches can be mounted on lateral faces of the body. Mounting from top T-slots are provided on faces of the body (except port face), allowing mounting for various brackets. (Not suitable for mounting the cylinder itself.) Can be mounted from two directions Mounting from bottom MGJ MGP MGQ MGG MGC MGF MGZ MGT Application examples Changing direction Positioning D- -X Individual -X Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
2 Series MGF Model Selection Operating Conditions 1. Bore size: ød 2. Operating pressure: P (MPa). Mass of total loads: Wo (kg) Wo = (Load mass: WA) + (Jig mass: WB). Piston speed: v (mm/s) Calculate required output FA 9.8 x Wo FA = η η Operating pressure (MPa) or more Take next larger bore size than ød Check Theoretical Output Fo Fo: Refer to Theoretical Output on page 1. FA FO NO FA > FO YES FA FO Mounting orientation Vertical Piston speed Check (maximum speed) V Horizontal Allowable horizontal direction Check load Check eccentric distance L mo: Refer to Operating conditions (Allowable horizontal load) on page 11. NO mo Wo mo < Wo YES mo Wo YES m Wo Model selected m: Refer to Operating conditions (Allowable eccentric load) on page 11. NO m < Wo m Wo Allowable rotational torque Non-rotating accuracy Deflection angle of plate for eccentric load θ θ T θ θ θ θ Bore size Stroke T (N. m) 0 1 Bore size Non-rotating accuracy θ ± 0.08 ± ± 0.0 Note) The value given for the non-rotating accuracy is applicable below the allowable rotational torque. If a greater rotational torque is applied, the nonrotating rod (page 1) bends, exceeding the value of the non-rotating accuracy. Bore size 0 Deflection angle θ ± 0. or less ± 0. or less Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
3 Guide Table Series MGF Operating Conditions Allowable horizontal load l Allowable eccentric load The maximum value of load which can be applied at an eccentric position at a distance of l from the cylinder center. l m m 0 (Load center of gravity) l = 0 mm Load mass: m0 (kg) Load mass: m0 (kg) Stroke MGF0 MGF MGF0 MGF MGF Graph l = 0 mm Graph v = 0 mm/s or less Graph v = 0 mm/s or less Graph Load mass: m0 (kg) Load mass: m0 (kg) MGF0 MGF MGF 0 0 Stroke l = 0 mm Graph l = 0 mm Graph MGF0 MGF Load mass: m (kg) Load mass: m (kg) MGF0 MGF MGF Eccentric distance : l MGF0 Load mass: m (kg) Load mass: m (kg) MGF MGF0 MGF Eccentric distance : l v = 10 mm/s or less Graph v = 0 mm/s or less Graph MGF MGF MGF MGF0 MGJ MGP MGQ MGG MGC MGF MGZ MGT MGF MGF MGF 0 0 Stroke Stroke Eccentric distance : l 2 Eccentric distance : l How to read the graph 1) When the load mass is 70 kg, eccentric distance is 60 mm, and the maximum speed is 10 mm/s Select MGF0 from Graph. 2) When MGF is operated with a load mass kg and 0 mm eccentric distance From Graph, the cylinder can be used at a maximum speed of 0 mm/s or less. 11 Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800) D- -X Individual -X
4 Guide Table Series MGF ø, ø, ø0 How to Order Port thread type MGF 0 Nil TN TF Rc NPT G Guide Table Bore size/ Standard stroke, 0, 7, 0, 0, 7, 0, 0, 7, 0 M9BW Number of auto switches Nil S n Made to Order Refer to page 1 for details. 2 pcs. 1 pc. "n" pcs. Auto switch Nil Without auto switch (Built-in magnet) Select applicable auto switches from the table below. Applicable Auto Switch/Refer to pages 1719 to 1827 for further information on auto switches. Type Solid state switch Reed switch Special function Diagnostic indication (2-color indication) Water resistant (2-color indication) Load voltage Auto switch model Lead wire length (m) Electrical Wiring entry (Output) 0. 1 DC AC Perpendicular In-line (Nil) (M) (L) (Z) -wire (NPN) V, 12 V -wire (PNP) 2-wire 12 V -wire (NPN) V, 12 V Grommet Yes -wire (PNP) 2 V 2-wire 12 V -wire (NPN) V, 12 V -wire (PNP) 2-wire 12 V Grommet Lead wire length symbols: 0. m Nil 1 m M m L m Z Indicator light Yes -wire (NPN equivalent) 2-wire 2 V No (Example) M9NW (Example) M9NWM (Example) M9NWL (Example) M9NWZ V 12 V 0 V 0 V or less M9NV M9PV M9BV M9NWV M9PWV M9BWV M9NAV M9PAV M9BAV M9N M9P M9B M9NW M9PW M9BW M9NA M9PA M9BA Z76 Z7 Z80 Pre-wired connector Applicable load IC circuit IC circuit IC circuit IC circuit IC circuit Solid state auto switches marked with are produced upon receipt of order. : D-A9/A9V cannot be mounted. Relay, PLC Relay, PLC Since there are other applicable auto switches than listed, refer to page 19 for details. For details about auto switches with pre-wired connector, refer to pages 178 and 178. Auto switches are shipped together (not assembled). 12 Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
5 Guide Table Series MGF Specifications Bore size 0 60 Action Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Cushion Lubrication Double acting Air 1. MPa 1.0 MPa 0.1 MPa to 60 C to 0 mm/s Rubber bumper on both ends Non-lube Stroke length tolerance mm Symbol XC79 Made to Order Specifications (For details, refer to page 187.) Specifications Machining tapped hole, drilled hole and pin hole additionally Standard Stroke Model Standard stroke Intermediate stroke MGF As for the intermediate strokes (by the stroke interval) other than the standard strokes at left are manufactured by means of installing a spacer with the width of,, 1,, 2 mm. MGF, 0, 7, 0 Example) In the case an MGF-1 specification is required, a spacer of 1 mm is installed in the MGF-.The full MGF0 length dimension when the cylinder is retracted is the same as that of mm stroke. Theoretical Output MGJ OUT (N) IN (N) MGP Bore size Rod size 2 Operating Piston area direction (mm 2 ) OUT IN Operating pressure (MPa) (N) MGQ MGG MGC 6 OUT IN MGF 0 6 OUT IN MGZ Note) Theoretical output (N) = Pressure (MPa) x Piston area (mm 2 ) MGT Mass (kg) Model Bore size Standard stroke MGF MGF MGF D- -X Individual -X Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
6 Series MGF Clean Series Port thread type Nil TN TF Rc NPT G MGF 0 M9BW Clean Series Relief type Bore size/ Standard stroke 0, 0, 7, 0, 0, 7, 0, 0, 7, 0 Number of auto switches Nil S n 2 pcs. 1 pc. "n" pcs. Auto switch Nil Without auto switch (Built-in magnet) Auto switches are shipped together (not assembled). Port for extending cylinder Rc 1/8 relief port Port for retracting cylinder GB B + Stroke A + Stroke Dimensions Bore size 0 A B GB Dimensions other than the above are the same as standard products. 1 Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
7 Guide Table Series MGF @0!1!7!8!9!!6!2 y w o r t q e! When the cylinder is When the cylinder is retracted Component Parts No Description Material Note Body Tube Rod cover Piston Piston rod Plate End plate Non-rotating rod Bushing Bushing (For non-rotating rod) Bumper Hexagon socket head cap screw A Aluminum alloy Aluminum alloy Aluminum alloy Aluminum alloy Carbon steel Aluminum alloy Aluminum alloy Carbon steel Resin Lead-bronze casted Urethane Carbon steel Clear anodized Black hard anodized Black hard anodized Chromated Electroless nickel plated Anodized Anodized Hard chrome plated Nickel plated Replacement Parts: Seal Kit Bore size 0 Kit no. MGF -PS MGF -PS MGF0-PS Contents Items!9 from the table above. Seal kit is not compatible with the clean series. Seal kit includes to. Order the seal kit based on each bore size. Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-L-0 (g) Component Parts No Description Material Note Hexagon socket head cap screw B Carbon steel Nickel plated Hexagon socket head cap screw C Carbon steel Nickel plated Magnet Plug Carbon steel Element Resin Retaining ring Spring steel Rod seal NBR Piston seal NBR O-ring A NBR O-ring B NBR O-ring C NBR Reinforcement ring Carbon steel Electroless nickel plated MGJ MGP MGQ MGG MGC MGF MGZ MGT D- -X Individual -X Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
8 Series MGF Dimensions: ø MGF 1 0 x M8 x 1.2 through ø Stroke 6 + Stroke When the cylinder is extended 2 x Rc, NPT, G 1/8 8 Breathing hole for guide (with element) Port for extending cylinder Port for retracting cylinder M: T-slot for hexagon bolt K 11 x M8 x 1.2 through x K (6 places) Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
9 Guide Table Series MGF ø MGF x M x 1. through ø1 11. When the cylinder is extended M6: T-slot for hexagon bolt 8. + Stroke 60 + Stroke 2 x Rc, NPT, G 1/ Breathing hole for guide (with element) Port for extending cylinder 6 Port for retracting cylinder 16 x M x 1. through K MGJ MGP MGQ MGG MGC MGF MGZ MGT x K (6 places) 7 D X Individual -X Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
10 Series MGF Dimensions: ø0 MGF x M12 x 1.7 through ø Stroke 6 + Stroke 11. When the cylinder is extended 6 M6: T-slot for hexagon bolt K 186 x M12 x 1.7 through x K (6 places) x Rc, NPT, G 1/ Port for extending cylinder Breathing hole for guide (with element) Port for retracting cylinder Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
11 Guide Table Series MGF Minimum Auto Switch Mounting Stroke No. of auto switches mounted D-M9V D-M9WV D-M9AVL Applicable auto switch model D-M9 D-M9W D-M9AL D-Z7 D-Y69 D-Y9 D-Z8 D-Y7PV D-Y7P D-Y7WV D-Y7W D-Y7BAL 1 pc. 2 pcs Auto Switch Proper Mounting Position (Detection at Stroke End) B A Operating Range Auto Switch Proper Mounting Position Auto switch model Bore size 0 A D-M9 D-M9V D-M9W D-M9WV D-M9AL D-M9AVL B. D-Z7/Z80 D-Y9/Y69 D-Y7P/Y7PV D-Y7W/Y7WV D-Y7BAL A Dimensions above denote the standard strokes. Adjustment on A dimension is required for intermediate strokes. Note) Adjust the auto switch after confirming the operating conditions in the actual setting. Auto Switch Mounting Bracket: Part No. B Auto switch model D-M9/M9V D-M9W/M9WV D-M9AL/M9AVL D-Z7/Z80 D-Y9/Y69 D-Y7P/Y7PV D-Y7W/Y7WV D-Y7BAL Bore size Since this is a guideline including hysteresis, not meant to be guaranteed. (Assuming approximately ±% dispersion) There may be the case it will vary substantially depending on an ambient environment Auto switch model D-M9/M9V D-M9W/M9WV D-M9AL/M9AVL Bore size ø, ø, ø0 BMG2-012 D-M9(V)/M9W(V)/M9A(V)L BMG2-012 MGJ MGP MGQ MGG MGC MGF MGZ MGT Other than the applicable auto switches listed in How to Order, the following auto switches can be mounted. For detailed specifications, refer to pages 1719 to Auto switch type Model Electrical entry (Fetching direction) Features D-Y69A, Y69B, Y7PV Grommet (Perpendicular) D-Y7NWV, Y7PWV, Y7BWV Diagnostic indication (2-color indication) Solid state D-Y9A, Y9B, Y7P Grommet (In-line) D-Y7NW, Y7PW, Y7BW Diagnostic indication (2-color indication) For solid state auto switches, auto switches with a pre-wired connector are also available. Refer to pages 178 and 178 for details. Normally closed (NC = b contact), solid state auto switch (D-F9G/F9H/Y7G/Y7H type) are also available. For details, refer to pages 176 and 178. D- -X Individual -X Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
12 Series MGF Specific Product Precautions Be sure to read before handling. Refer to front matters 2 and for Safety Instructions and pages to 11 for Actuator and Auto Switch Precautions. Caution Selection Operate loads within the range of the operating limits. Select a model taking into consideration the allowable horizontal loads, rotational torque and eccentric loads that will apply. When used in excess of the applicable limit, eccentric loads applied to the tube guide will cause wear of the guide, increase the guide s deviation range, cause stress cracks and breaks on the mounting bolts, and decrease the life of the cylinder. Do not allow any dents, scratches, or other damage on the mounting faces of either the plate or end plate. The flatness of the mounting face may deteriorate, the guide's deviation range may increase and the sliding resistance may become greater. Do not allow hands or fingers near the cylinder during its operation. Your fingers may be caught between the body and the plate. If you need to come near the cylinder during its operation, install a cover on the cylinder. Caution Mounting from upper side Model MGF MGF MGF0 Bolt M6 x 1 M8 x 1.2 M x 1. Mounting For mounting the cylinder, use screws that meet the appropriate length and tighten within the limits of the maximum tightening torque. Maximum tightening torque (N m) 2 1 l l 8 Mounting from bottom side l Do not bring objects that are sensitive to magnetism near the cylinder. There is a magnetic built into the cylinder. Do not bring magnetic disks, cards, or tapes near the cylinder. Data may be lost. If the cylinder is operated vertically with heavy loads, measures must be taken to prevent rapid advancement of the piston rod when starting to operate in the downward direction. If the cylinder is operated vertically with heavy loads at the same pressure for both upward and downward directions, the starting speed in the downward direction may be highter than the speed controlled with a speed controller. In such cases, use a dual pressure control circuit as an pneumatic circuit. Example) Model MGF MGF MGF0 Bolt M8 x 1.2 M x 1. M12 x 1.7 Maximum tightening torque (N m) l 8 Avoid use in environments where a cylinder will come in contact with coolants, cutting oil, water, adhesive matter, or dust, etc. Also avoid operation with compressed air that contains drain or foreign matter, etc. Foreign matter or liquids on the cylinder s interior or exterior can wash out the lubricating grease, which can lead to deterioration and damage of bearing sliding parts and seal materials, causing a danger of malfunction. When operating in locations with exposure to water and oil, or in dusty locations, provide protection such as a cover to prevent direct contact with the cylinder and operate with clean compressed air. When mounting a workpiece to the cylinder, do so only when the piston is retracted. Also make sure that the rotational torque applied to the cylinder body does not exceed the allowable rotational torque (given on page ). (Otherwise, the excessive rotational torque will damage the non-rotating mechanism and lead to a malfunction.) Courtesy of Steven Engineering, Inc.-2 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (800)
Guide Table. ø40, ø63, ø100
Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder
More informationGuide Table. MGF Series
Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder
More informationCompact Guide Cylinder Series MGQ
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
More informationCompact Guide Cylinder
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More informationDual Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. Dual rod cylinder with guide function suitable for pick & place applications.
Dual Rod Cylinder Series J/ ø, ø0, ø, ø, ø, Dual rod cylinder with guide function suitable for pick & place applications. Twice the thrust Non-rotating accuracy ±0. Ball bushing bearings and slide bearings
More informationPrecision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8
Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole
More informationMGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X
Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) 23 MGJ -Z W MGQ MGG MGC MGF MGT D- -X Tube rod diameter External dimension Non-rotating Double
More informationNon-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X
Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) MGJ -Z W MGQ MGG MGC MGF MGT 23 D- -X Non-rotating Double Power Cylinder Double extension output
More information240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.
Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable
More informationParallel Style Air Gripper: Wide Type
Parallel Style Air Gripper: Wide Type Series MHL Built-in dust-protection mechanism A scraper with a dust lip is adopted for all rod rotating parts. A large amount of gripping force is provided through
More informationDouble Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism)
Non-rotating Double Power Cylinder Series Double Power Cylinder Series R (without non-rotating mechanism) 2 Non-rotating Double Power Cylinder Double extension output power!! Our unique construction doubles
More informationFree Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.
Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square
More informationSeries MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.
Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without
More informationCAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:
CAT.ES-3 E -UK Dual-Rod Cylinder Series CXS New: CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ Dual-Rod Cylinder with guide functio for pick-and-place applications Series CXS! Twice the
More informationHeavy Duty Stopper Cylinder
Heavy Duty Stopper Cylinder Series ø, ø32 To stop pallets gently Stopper cylinder with built-in shock absorber Amount of energy absorption can be adjusted to suit the load. Stops the workpiece gently with
More informationCompact Guide Cylinder with Lock
Compact Guide Cylinder with Lock Series,,,, ø,,, ø0 CLG CL CN2 MLC Drop prevention when the pressure of air source is decreased or the residual pressure is released. Drop prevention for press fitting jig
More informationSeries MGF ø40, ø63, ø100
Guide Table Series MGF ø, ø, ø How to Order MGF Z7 Guide table Number of auto switches 2 S 1 Cylinder bore size/ Standard stroke,, 7,,, 7,,, 7, Auto switch Without auto switch * Refer to the table below
More informationCompact Guide Cylinder Series MGP
Compact Guide Cylinder Series MGP ø2, ø, ø, ø, ø, ø, ø, ø,, ø0 MGJ MGP MGQ MGG MGC MGF MGZ MGT Series Variations Series Bearing type Cushion 2 0 Page Standard type MGP With air cushion MGP With end lock
More informationHow to Order M9BW. Action. Double acting Single acting. Load voltage Electrical entry direction M9NWV M9NW 12 V 5 V, M9BWV M9BW 12 V 12 V
Angular Type Air Gripper/Standard Type 2 Series ø, ø1, ø20, ø25 How to Order Angular type air gripper 2 20 Bore size mm 1 1 mm 20 20 mm 25 25 mm D S Action D Double acting Single acting M9BW Made to Order
More informationCompact Guide Cylinder
Compact Guide Cylinder Series ø2, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Series standard type and series high precision ball bushing bearing type (except with end lock) products have been remodeled for a lightweight
More informationDual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.
Dual Rod Cylinder / Series ø,,,,, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions for ball
More informationFree Mount Cylinder for Vacuum
Free Mount Cylinder for Vacuum Series A free mount cylinder with a vacuum passage in the rod to meet the requirements for Air cylinder + Vacuum pad. A vacuum passage has been provided in the rod of the
More informationFree Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43
CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular
More informationDual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.
Dual Rod Cylinder J/ Series ø, ø, ø, ø, ø, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions
More information22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder.
Compact Guide Cylinder Series ø2,,, ø2,,, ø, ø63,, ø0 Up to Weight reduced by up to 24% with a shorter guide rod and thinner plate 24% Weight reduced! 3 types of bearing can be selected. Slide bearing
More information22mm Space required between the bottom of the cylinder body and your equipment is reduced.
Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPG AND DELIVER TENS OF THOUSANDS OF -STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More information180 Angular Style Air Gripper
8 Angular Style Air Gripper Series 2/2 Cam Style / Rack & Pinion Style 99 8 Angular Style Air Gripper Cam Style Rack & Pinion Style Series 2/2 Series 2/Cam Style Light and compact size in small bore sizes
More informationCompact Cylinder/Plate type
Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series
More informationCAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:
CAT.ES-3 E -UK Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating
More informationBasic type / Direct mount type
Basic type / Direct mount type Series / ø, ø, ø, ø, ø, ø, ø, ø, ø3 CYS CYL CY CYF Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, CA 0-30-Main Office: () -0-Outside Local Area: (00)
More informationMini Rotary Actuator/Rack & Pinion Style
Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5 43(54)
More informationCAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP
CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types
More informationCAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:
CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating
More informationMini Rotary Actuator/Rack & Pinion Style
Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5
More information180 Angular Style Air Gripper
18 Angular tyle Air Gripper eries 2/2 Cam tyle / Rack & Pinion tyle -X D- Courtesy of teven Engineering, Inc.-2 Ryan Way, outh an Francisco, CA 98-67-Main ffice: (6) 88-92-utside Local Area: (8) 28-92-www.stevenengineering.com
More informationSeries MGP. Compact Guide Cylinder. New end lock type introduced to Series MGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series.22- CL MLG CN CNG MNB CNS CLS CB CV/MVG CXW CXS CXT MX MXU MXH MXS MXQ MXF MXW MXP MG MGQ MGG MGC MGF
More informationBasic type/direct mount type
Basic type/direct mount type Series / ø, ø, ø, ø, ø, ø, ø, ø, ø3 CYS -Z CYL CYH CYF CYP 443 D- -X Technical data Magnetically Coupled Rodless Cylinder Direct mount type Series / Basic type Improved durability
More informationMiniature Guide Rod Cylinder ±0.1. Mounting from 2 directions
Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one
More information1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.
Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.
More information69% 30.5 mm 16 mm. Compact Guide Cylinder. Compact. lighter 0.32 kga0.1 kg (Compared with the current MGP-Z series, ø16, 10 mm stroke) Weight
Compact Guide Cylinder ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS Compact Overall length shortened New s ø80, ø100 added. Port thread types NPT, G added. Height shortened JMGP ø32 25 mm stroke
More informationCompact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting
Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both
More informationWedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel
Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon
More informationDual Rod Cylinder: Double Rod Type. How to Order. Load voltage Auto switch model Perpendicular In-line 3-wire (NPN equivalent) Y7NWV Y7NW 5 V, 12 V
Dual Rod Cylinder: Double Rod Type eries CXW ø, ø, ø, ø, ø2, ø32 CX W L How to Order 0 Y7W M L Double rod type earing type lide bearing all bushing bearing ore size/troke ore size,,,,,,,,,,,,,,, 2, 32,
More informationParallel Style Air Gripper
INFRMATIN Parallel tyle Air Gripper With Dust Cover Model variations with excellent dust proof and drip proof dust cover are expanded. MHZL2 Long stroke type MHZL2 series ø1, ø16 and ø2 with dust cover
More informationAngular Style Air Gripper
Angular Style Air Gripper Series /A/M 15 Angular style air gripper Series /A/M - Auto switch is attachable. 8 mm x 0 mm x mm g Body option (Only for A-) Side piping Port Port A- Short body. 1 mm x 0 mm
More informationLow Profile Air Gripper
Low Profile Air Gripper Series MHF2 MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW -X Low profile air gripper with space-saving design MRHQ MA D- Courtesy of Steven ngineering, Inc.-2 Ryan Way, South San Francisco,
More informationPlate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63
Plate Cylinder MU Series ø, ø, ø, ø, ø It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting RoHS Small auto switch CUJ CU CQS JCQ CQ2 Reduction of labor for work RQ CQM
More informationSlide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32
Slide Unit CX/M/L Series Slide Bearing/CX:ø0, ø, ø5 M:ø0, ø, ø0, ø5, ø3 Ball Bushing Bearing/L:ø0, ø, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy
More informationSeries MXH/ ø6, ø10, ø16, ø20
Compact Slide Series / ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. CL MLG CNA CNG MNB CNS CLS CB CV/MVG
More informationAir Slide Table. Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece
ir Slide Table Series Height: mm/width: mm/length: mm () Front mounting accuracy: 0.01 mm Top mounting accuracy: 0.0 mm Traveling parallelism: 0.00 mm Note 1) Note ) Integrated front mounting part and
More informationDual rod cylinder with guide function for pick & place applications.
Dual Rod Cylinder Series CXS ø, ø0, ø, ø, ø2, Dual rod cylinder with guide function for pick & place applications. Series CXS Twice the thrust Non-rotating accuracy ±0. MX MY CY MG CX - Ball bushing bearings
More informationSeries MLGP. Low Profile Guide Cylinder with Lock. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
CAT.ES-4 A Low Profile Guide Cylinder with Lock Series MLGP,,,, ø,,, ø0 Drop prevention when supply pressure falls or residual pressure is released Drop prevention for press fitting jig Drop prevention
More informationSlide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3)
Slide Unit Series CX/M/L Slide Bearing/CX:ø, ø, ø5 M:ø, ø6, ø0, ø5, ø3 Ball Bushing Bearing/L:ø, ø6, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy
More informationNew cylinder body allows small auto switches to be mounted on 4 surfaces.
Toggle Type Air Gripper ø32, ø4, ø5, ø63 New cylinder body allows small auto switches to be mounted on 4 surfaces. RoH Auto switch mounting rail removed. A round slot for mounting small auto switches is
More informationSeries RSH/RS1H. To stop pallets gently. Stopper cylinder with built-in shock absorber. Heavy Duty Stopper Cylinder. ø20, ø32 ø50, ø63, ø80
CAT.ES-118 B Heavy Duty Stopper Cylinder Series RSH/RS1H ø, ø ø, ø, ø To stop pallets gently Stopper cylinder with built-in shock absorber Heavy Duty Stopper Cylinder Series RSH/RS1H ø, ø ø, ø, ø To stop
More information49.5 mm Overall. 30 mm MXZ ø20. Compact. Compact Cylinder with Linear Guide. MXZ Series CAT.ES20-236A. ø12, ø16, ø20, ø25. MXZ ø20, 10 mm stroke.
Compact Cylinder with Linear Guide ø12, ø16, ø20, ø25 RoHS Compact 49.5 mm Overall length MXZ ø20, 10 mm stroke 30 mm MXZ ø20 Width Design and assembly time is reduced due to integration of a linear guide
More informationToggle Type Air Gripper
ø2, ø40, ø50, ø6 Ideal for gripping heavy workpiece Toggle mechanism is adopted. Holds workpiece even when pressure drops. The toggle mechanism that activates when the finger closes realizes strong and
More informationLow-Speed Rotary Actuator
Low-Speed Rotary Actuator Series CRQX/ Possible to transfer a workpiece at low-speed. Rotation time adjustment range: to ( s/9 ) Lowspeed Standard Model CRQX CRQ,,,,,,,,,,,,,, Rotation time adjustment
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle
More informationSeries MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger)
Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials tandard: Carbon steel Optional:
More informationHow to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil
With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the
More informationParallel Style Air Gripper
Parallel tyle Air Gripper eries MHZ MHZ MH -X D- Courtesy of teven Engineering, Inc.-3 Ryan Way, outh an Francisco, CA 98-37-Main Office: () 88-9-Outside Local Area: (8) 8-9-www.stevenengineering.com 373
More informationAir Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.
ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side
More informationGuide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 46-54 www.cmafh.com Guide Cylinder Series MGG ø, ø, ø, ø, ø, ø, ø, ø Integration of a basic cylinder and guide
More information3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder
More informationSpecifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper
Angular Style Air Gripper Standard Type Series MHC2 Size: 10, 16, 20, 25 A large amount of gripping force is provided through the use of a double piston mechanism, while maintaining a compact design. Built-in
More informationAir Slide Table. Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece
ir Slide Table Series Height: mm/width: mm/length: mm () Front mounting accuracy: 0.01 mm Top mounting accuracy: 0.0 mm Traveling parallelism: 0.00 mm Note 1) Note ) Integrated front mounting part and
More informationLow Profile Slide Table Series MXF ø8, ø12, ø16, ø20
Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with
More informationParallel Type Air Gripper/2 Finger, 3 Finger, 4 Finger
Parallel Type Air Gripper/ inger, inger, inger MHS Series ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- ightweight, compact design with reduced height High repeatability:
More informationMini Free Mount Cylinder
Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded
More informationTraveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece
ir Slide Table Series RoHS Height: mm/width: mm/length: mm () Traveling parallelism: 0.00 mm Note 1) Front mounting accuracy: 0.01 mm Note ) Top mounting accuracy: 0.0 mm Integrated front mounting part
More informationAir Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types
ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover
More informationLow Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77
Low Profile Air Gripper Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Height is approximately / the size of an equivalent Series MHZ2. MHZ2-D 42 Bore
More informationLow Profile Air Gripper
Low Profile Air Gripper MHF2 Series ø8, ø, ø, ø RoHS Low profile air gripper with space-saving design MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 465 Low Profile Air Gripper MHF2 Series Height
More informationCompact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
More informationCompact Rotary Actuator
Compact Rotary Actuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CRB2 CRBU2 CRB1 MSU CRJ CRA1 Rotation 360 type 360 MSZ MRQ Series Variations Page Rotating angle 80 to 0 170
More informationLow-Speed Rotary Actuator
Low-Speed Rotary Actuator Series CRQX/ Possible to transfer a workpiece at low-speed. Rotation time adjustment range: to ( s/9 ) Lowspeed Standard Model CRQX CRQ,,,,,,,,,,,,,, Rotation time adjustment
More informationCompact Hydraulic Cylinder
ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch
More information/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting
roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state
More informationMechanically Jointed Rodless Cylinder
Mechanically Jointed Rodless Cylinder MY Series ø, ø, ø MYB MY MYB MYM MYC MY MY T MY W MYC MY /T MYA MYB MYM Compact and low profile design D- -X Technical Data Mechanically Mechanically Jointed Jointed
More informationSeries CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
More informationRotary Actuator/Vane Style
Rotary Actuator/Vane Style Series :,,,, Basic style Series With angle adjuster Series BWU Fluid Air, CR Vane type Port location Single vane (S) ouble vane () Side ported (Nil) Axial ported (E) S Side ported
More informationRack & Pinion Type/Size: 30, 50, 63, 80, 100. Compact auto switches are mountable. (D-M9 ) Rotating angle. Rotating. angle
Rotary Actuator Series Rack & Pinion Type/: 3, 5, 63, 8, 1 Compact auto switches are mountable. (D-M9 ) Width reduced by up to 14 mm Space saving by changing the auto switch rail mounting to groove mounting.
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170
More informationGuide Cylinder/Compact Type
Guide Cylinder/Compact Type Series ø, ø, ø, ø, ø Integration of guide rods and a base cylinder ir cushion is standard. Enables the impact to be absorbed at the stroke end when the cylinder is operated
More informationSeries MXU ø6, ø10, ø16
Compact Slide Series ø, ø, ø1 Displacement accuracy against moments Table edge displacement M1(Pitch moment): 0.02mm or less M2(Yaw moment): 0.01mm or less The miniature linear guide improves the linear
More informationDirect Mount Type. REBR Series. ø15, ø25, ø32. REA REB REC Smooth MQ RHC RZQ D- -X. Low Speed
Direct Mount Type R Series ø, ø, ø 85 R Series Selection Fn: llowable driving force (N) MD: Maximum allowable moment when connection fitting, etc., is directly loaded (N m) Pv: Maximum operating pressure
More informationHigh Rigidity/ High Precision Guide Type ø50, ø63. The use of two linear guides allows a maximum load of 320kg. (ø63) Rodless cylinder MY1BH SMC
MYHT Series High Rigidity/ High Precision Guide Type ø, ø6 The use of two linear guides allows a maximum load of kg. (ø6) Rodless cylinder MYBH SMC 2 linear guides Easy maintenance is stressed by a revolutionary
More informationCompact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.
Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationMini Free Mount Cylinder
Mini Free Mount Cylinder ø, ø, ø, ø, ø, ø1, ø Series CUJ Added ø, ø1, ø bore sizes. Action Double acting Single acting, spring return Double acting Single acting, spring return Double acting Single acting,
More informationRotary Actuator. New RoHS. New. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB 2. Standard type/series CRB2
Rotary Actuator Vane Type 1, 15, 2, 3, 4 Standard Type Free Mount Type Many combinations available! Standard type/series Piping ports are located on the flat surface. Fittings can be secured firmly, piping
More informationRotary Table/Rack & Pinion Style
Rotary Table/Rack & Pinion Style Series :,,,,,,,, 0, 0, 0 CRB CRBU CRB CR CRQ CRQX X D- Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 00-0-Main Office: () -0-Outside Local rea:
More informationParallel Type Air Gripper
Parallel Type Air Gripper MHZ eries ø, ø1, ø1, ø2, ø2, ø32, ø MHZ MHF MHL MHR MHK MH MHC MHT MHY MHW -X MRHQ MA D- 381 Integral linear guide used for high rigidity Repeatability: ±.1 mm Low profile Martensitic
More informationSeries RSH/RS1H. To stop pallets gently. Heavy Duty Stopper Cylinder. Stopper cylinder with built-in shock absorber. ø20, ø32 ø50, ø63, ø80
1 eavy Duty Stopper Cylinder Series RS/RS1 ø, ø ø, ø, ø To stop pallets gently CX CY RC RS A MI S C G5-S Stopper cylinder with built-in shock absorber - -9-1 2 eavy Duty Stopper Cylinder Series RS/RS1
More informationCompact Rotary Actuator
Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More informationC85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40
ISO Cylinder (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 Series: ø32, ø40 RoS Part numbers set for actuators with mounting brackets, rod end brackets and auto switches available. Now it is not necessary
More information