16% lighter Existing model

Size: px
Start display at page:

Download "16% lighter Existing model"

Transcription

1 ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter Existing model New Series.0 kg.69 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set additionally d d type, Double rod : eat resistant cylinder (-X6), With heavy duty scraper (-XC4), djustable stroke cylinder (-XC8, 9) and Dual stroke cylinder (-XC0, ) etc. are added. Series CT.EUS0-3-UK

2 Double acting, Single rod Series ø3, ø40, ø50, ø63, ø80, ø00 Part numbers with rod end bracket and/or pivot bracket available Not necessary to order a bracket for the applicable cylinder separately Note) Mounting bracket is shipped together with the product, but not assembled. Example) MD D Z- N V -M9W Mounting Pivot bracket No bracket N Pivot bracket is shipped together with the product, but not assembled. pplicable to only mounting D (Double clevis) and T (Centre trunnion). N: Kit of pivot bracket and double clevis Kit of pivot bracket Rod end bracket and trunnion No bracket V Single knuckle joint W Double knuckle joint With rod end bracket V: Single knuckle W: Double joint knuckle joint Various mounting bracket options Suitable mounting brackets can be selected for the installation condition. Improved amount of mounting freedom D: Double clevis N: Double clevis pivot bracket C: Single clevis G: ead flange : asic V: Single knuckle joint L: xial foot N: Trunnion pivot bracket W: Double ek knuckle kle joint F: Rod flange L: xial foot T: Centre trunnion N: Trunnion pivot bracket Features

3 ir Cylinder Lightweight Reduced weight by changing the shape of the rod cover and head cover. [kg] Reduction rate Existing model pplicable speed/load Piston speed: Max. 000 mm/s (ø3 to ø00) Load yield: See table below. [kg] Speed: 00 mm/s Maximum load weight Port Various switches such as compact auto switches and magnetic field resistant auto switches can be mounted. Mounting dimensions are the same as the existing product. Series Variations Series -Z Series Type Cushion No environmental hazardous substances used Lead free bushing is used as sliding material. Compliant with EU RoS directive Compact auto switches D-M9 D-9 Magnetic field resistant t auto switchess D-P3DW D-P4DW uilt-in With magnet rod boot Page -Z Double acting, Single rod Rubber ir Page Double rod W-Z Double acting, Double rod Rubber ir Page For standard type with bore size of 5 mm, refer to the catalogue in our website Series Non-rotating rod Single rod K Double acting, Single rod Rubber ir Non-rotating rod Double rod KW Double acting, Double rod Rubber ir With end lock Double acting, Single rod Rubber ir Features

4 Combinations of Products and Specifications Series : : : Special product (Please contact SMC for details.) : Not available Specifications pplicable bore size ir ø3 to ø00 ( type) Double acting Single rod Rubber Page ø3 to ø00 Long st Long stroke D uilt-in magnet ø3 to ø00 - J K With rod boot 5 Copper (Cu) and Zinc (Zn)-free Note ) R V Water resistant X Change of rod end shape X6 eat resistant cylinder ( 0 to 50 C) XC4 With heavy duty scraper Series ction/ Type Cushion Page XC5 eat resistant cylinder ( 0 to 0 C) XC7 XC8 XC9 XC0 XC XC XC4 XC XC7 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder Change of trunnion bracket mounting position Fluororubber seal Double clevis and double knuckle joint pins made of stainless steel ø3 to ø00 XC9 Double knuckle joint with spring pin XC30 Rod trunnion XC35 With coil scraper XC65 Made of stainless steel (Combination of XC7 and XC68) XC68 Made of stainless steel (with hard chrome plated piston rod) X84 Cylinder with heat resistant reed auto switch ( 0 to 0 C) Note ) For details, refer to the catalogue in our website Front matter

5 Series ir ( type) Double acting Double rod Rubber Page ø3 to ø00 ø3 to ø00 Long st D - J K 5 Double cting, Single Rod Double cting, Double Rod W R V X X6 XC4 XC5 XC7 uto Switch XC8 XC9 XC0 XC XC XC4 XC XC7 XC9 XC30 XC35 XC65 XC68 X84 Front matter

6 ir Cylinder: Type Double cting, Single Rod Series ø3, ø40, ø50, ø63, ø80, ø00 RoS Mounting asic xial foot Rod fl ange ead fl ange Single clevis Double clevis Centre trunnion With auto switch MD L F G C D T With auto switch (uilt-in magnet) Port thread type Rc TN NPT TF G L D mm mm mm mm mm mm Cylinder stroke (mm) Refer to Strokes on page. ow to Order N Z Z ccessories N V No bracket N Pivot bracket Only for D and T mounting types. Pivot bracket is shipped together with the product. Cylinder suffix None Rod boot J Nylon tarpaulin K eat resistant tarpaulin Cushion ir cushion at both ends N Without air cushion Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm. pplicable uto Switches/Refer to the uto Switch Guide for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (-colour indication) Water resistant (-colour indication) Electrical entry Grommet Terminal conduit Grommet Indicator light Wiring (Output) 3-wire (NPN) Yes M9W Number of auto uto switch switches Without auto switch pcs. S pc. 3 3 pcs. n n pcs. For applicable auto switches, refer to the table below. Load voltage uto switch model Lead wire length [m] DC (Refer to page for details.) ccessories No bracket V Single knuckle joint W Double knuckle joint knuckle joint pin is not provided with the single knuckle joint. Rod end bracket is shipped together with the product. Pre-wired connector pplicable load -wire 4 V Terminal 33 conduit 34 PLC Yes 00 V, 00 V DIN terminal 44 Relay, Diagnostic indication (-colour indication) Grommet 59W PLC Water-resistant type auto switch can be mounted on the above models, but in such case SMC cannot guarantee water resistance. water-resistant type cylinder is recommended for use in an environment which requires water resistance. Lead wire length symbols: 0.5 m (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches then listed above, refer to page for details. For details about auto switches with pre-wired connector, refer to the uto Switch Guide. For the D-P3DW, refer to the the uto Switch Guide. The D-9 /M9 /P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-9 /M9 before shipment.) C and mounting ( ) (M) (L) (Z) M9N IC Tie-rod mounting 3-wire (NPN) 3-wire (PNP) 4 V 5 V, V M9P -wire V M9 00 V, 00 V J5 3-wire (NPN) 5 V, V G39 -wire V K39 circuit M9NW IC circuit 5 V, V 3-wire (PNP) M9PW -wire V M9W 3-wire (NPN) 4 V M9N IC 5 V, V 3-wire (PNP) M9P circuit -wire V M9 With diagnostic output (-colour indication) 4-wire (NPN) 5 V, V F59F IC circuit Magnetic fi eld resistant -wire P3DW (-colour indication) (Non-polar) P4DW 3-wire (NPN equivalent) 5 V 96 IC circuit Yes 00 V 93 Grommet No 00 V or less 90 IC circuit Relay, Yes 00 V, 00 V 54 PLC No V 00 V or less 64 Relay, PLC

7 ir Cylinder: Type Double cting, Single Rod Series Double acting Specifications ction Double acting, Single rod Fluid ir Proof pressure.5 MPa Maximum operating pressure.0 MPa Minimum operating pressure 0.05 MPa mbient and fluid temperature Without auto switch: 0 to 70 C (No freezing) With auto switch: 0 to 60 C Lubricant Not required (Non-lube) Piston speed 50 to 000 mm/s Stroke length tolerance Up to 50: +.0 0, 5 to 000: +.4 0, 00 to 500: Cushion oth sides (ir cushion) Note) Port size /8 /4 3/8 / asic, xial foot, Rod fl ange, ead fl ange Mounting Single clevis, Double clevis, Centre trunnion Note) Model without air cushion is designed to include rubber bumpers. Double cting, Single Rod Double cting, Double Rod W (For details, refer to pages 5 to 36.) Specifi cations Strokes stroke Max. stroke uto Switch -X Change of rod end shape 3 5, 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, X6 eat resistant cylinder ( 0 to 50 C) 40 5, 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, XC4 With heavy duty scraper 50 5, 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, XC5 eat resistant cylinder ( 0 to 0 C) 63 5, 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, XC7 -XC8 -XC9 -XC0 -XC -XC Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder 80 5, 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, 600, 700, Manufacture of intermediate strokes is possible. (Spacers are not used.) Produced upon receipt of order. Ordering Example of Cylinder ssembly -XC4 -XC Change of trunnion bracket mounting position Fluororubber seal Cylinder model: MDD3-50Z-NW-M9W -XC7 -XC9 -XC30 -XC35 -XC65 -XC68 Double clevis and double knuckle joint pins made of stainless steel Double knuckle joint with spring pin Rod trunnion With coil scraper Made of stainless steel (Combination of XC7 and XC68) Made of stainless steel (with hard chrome plated piston rod) Double clevis Pivot bracket Mounting D: Double clevis Pivot bracket N: Yes Rod end bracket W: Double knuckle joint uto switch D-M9W: pcs. Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. -X84 Cylinder with heat resistant reed auto switch ( 0 to 0 C) For special port location (-XC3), the mounting bracket and port location can be determined using the standard product corresponding to the operating conditions. For made of stainless steel (-XC6), use made of stainless steel (with hard chrome plated piston rod) (-XC68) that the surface treatment is performed on the piston rod with the same specifications. Double knuckle joint uto switch Refer to pages 7 to for cylinders with auto switches uto switch proper mounting position (detection at stroke end) and its mounting height Operating range Minimum stroke for auto switch mounting uto switch mounting brackets/part no.

8 Series ccessories Material of Rod oot Option Mounting asic xial foot Rod fl ange ead fl ange Single clevis Double clevis Centre trunnion Rod end nut Clevis pin Single knuckle joint Double knuckle joint (with pin) Rod boot Material Max. ambient temp. J Nylon tarpaulin 70 C K eat resistant tarpaulin 0 C Max. ambient temperature for rod boot itself. Mounting rackets/part No. llowable Kinetic Energy xial foot Note ) -L03 -L04 -L05 -L06 -L08 -L0 Flange -F03 -F04 -F05 -F06 -F08 -F0 Single clevis -C03 -C04 -C05 -C06 -C08 -C0 Double clevis -D03 -D04 -D05 -D06 -D08 -D0 Note ) Order two foots per cylinder. Note ) ccessories for each mounting bracket are as follows: xial foot, fl ange, single clevis/body mounting bolt, double clevis/body mounting bolt, clevis pin, fl at washers and split pins. Refer to page 0 for details. Theoretical Force Load weight [kg] ø00 ø80 ø63 ø50 ø40 ø3 Weights [kg] asic xial foot asic weight Flange Single clevis Double clevis Centre trunnion dditional weight per 50 mm of stroke ll mounting brackets ccessories Single knuckle joint Double knuckle joint (with pin) Calculation Example) 3-00Z (asic, ø3, 00 stroke) asic weight 0.44 (asic, ø3) dditional weight 0./50 stroke Cylinder stroke 00 stroke x 00/50 = 0.66 kg 3 Rod diameter Operating Piston area direction [mm ] (Unit: N) OUT Operating pressure [MPa] OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN Note) Theoretical force [N] = Pressure [MPa] x Piston area [mm ] IN Maximum speed [mm/s] 000 (Example) Find the upper limit of rod end load when an air cylinder of ø63 is operated at 500 mm/s. From a point indicating 500 mm/s on the axis of abscissas, extend a line upward and find a point where it intersects with a line for the 63 mm bore size. Extend a line from the intersection to the left and find a load weight 80 kg.

9 ir Cylinder: Type Double cting, Single Rod Series Construction o!0!7!9!4 i q!!6! er t!8 u w Double cting, Single Rod Component Parts No. Description Material Q ty Note Rod cover luminium die-cast Trivalent chromated ead cover luminium die-cast Trivalent chromated 3 Cylinder tube luminium alloy ard anodised 4 Piston rod Carbon steel ard chrome plating 5 Piston luminium alloy 6 Cushion ring luminium alloy nodised 7 Cushion ring luminium alloy nodised 8 ushing earing alloy 9 Cushion valve Steel wire Trivalent zinc chromated 0 Retaining ring Steel for spring ø40 to 00 Tie rod Carbon steel 4 Trivalent zinc chromated Tie rod nut Carbon steel 8 Trivalent zinc chromated 3 Wear ring Resin 4 Rod seal NR 5 Piston seal NR 6 Cushion seal Urethane 7 Cushion valve seal NR 8 Cylinder tube gasket NR 9 Rod end nut Rolled steel Trivalent zinc chromated 0 Magnet () Double cting, Double Rod W uto Switch Replacement Parts/Seal Kit Kit no. 3 3Z PS 40 C-40Z PS 50 C-50Z PS 63 C-63Z PS 80 C-80Z PS 00 C-00Z PS Contents Set of the nos.!4,!5,!6,!8 Seal kits consist of items!4,!5,!6,!8, and can be ordered by using the seal kit number corresponding to each bore size. Centre trunnion type should not be disassembled. (Refer to page 37.) The seal kit includes a grease pack (0 g for ø3 to ø50, 0 g for ø63 and ø80, 30 g for ø00). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-00 (0 g), GR-S-00 (0 g) Water Resistant ir Cylinder Water resistant air cylinders are also available in Series, which are suitable for use on machine tools, where exposure to coolant is possible and applicable for food machinery and automobile washing equipment in an environment where water splashes. Please refer to the catalogue in our website for more information. 4

10 Series asic/() Cushion valve W V Port øe Width across flats K G x P G C øe ød C MM Width across flats L K F M N x 4 x J ZZ + Stroke S + Stroke N With rod boot ød øe h l f Dimensions Stroke range L C D E F G J K K M MM N P S V W ZZ 3 Up to M6 x M0 x.5 7 / Up to M6 x M4 x.5 7 / Up to M8 x M8 x / Up to M8 x M8 x / Up to M0 x M x / Up to M0 x M6 x.5 38 / With Rod oot l d e f to 50 5 to 00 0 to 50 5 to 00 0 to to to to to to to to h to 50 5 to 00 0 to 50 5 to 00 0 to to to to to to to to Without ir Cushion S ZZ Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm

11 ir Cylinder: Type Double cting, Single Rod Series /With Mounting racket Refer to asic () for other dimensions. xial foot/(l) Cushion valve Port Double cting, Single Rod L LY 4 x øld xial Foot LX LZ LT Y X LS + Stroke ZZ + Stroke Without ir Cushion X Y Double cting, Double Rod W Stroke range LD L LS LT LX LY LZ X Y ZZ LS ZZ 3 Up to Up to Up to Up to Up to Up to uto Switch Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm Rod flange/(f) Cushion valve Port 4 x øfd FE FT FY F øfd FX FZ Rod Flange Stroke range F FD FE FT FX FY FZ Fd 3 Up to Up to Up to Up to Up to Up to Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm 6

12 Series /With Mounting racket Refer to asic () for other dimensions. ead flange/(g) Cushion valve Port 4 x øfd FY F FX FZ ZZ + Stroke FT ead Flange ore size Stroke range F FD FT FX FY FZ ZZ 3 Up to Up to Up to Up to Up to Up to Without ir Cushion ZZ Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm Single clevis/(c) Cushion valve Port CD0 CX Z + Stroke ZZ + Stroke U L RR Single Clevis ore size Stroke range CD0 CX L RR U Z ZZ 3 Up to Up to Up to Up to Up to Up to Without ir Cushion Z ZZ Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm 7

13 ir Cylinder: Type Double cting, Single Rod Series /With Mounting racket Refer to asic () for other dimensions. Double clevis/(d) Cushion valve Port ole dia.: CD0 Shaft dia.: CDd9 Double cting, Single Rod CX CZ Z + Stroke ZZ + Stroke Double Clevis Without ir Cushion ore size Stroke range CD0 CDd9 CX CZ L RR U Z ZZ 3 Up to Up to Up to Up to Up to Up to Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm ore size Z ZZ U L RR Double cting, Double Rod Centre trunnion/(t) Cushion valve Port Z + / Stroke TY W uto Switch TX TZ øtde8 TT Centre Trunnion ore size Stroke range TDe8 TT TX TY TZ Z 3 Up to Up to Up to Up to Up to Up to Without ir Cushion Z Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the Z dimension is longer than the cylinder with air cushion as follows: ø3, ø40: +3 mm, ø50, ø63: +4 mm, ø80, ø00: +5 mm 8

14 Series Pivot racket/trunnion and Double Clevis Pivot racket Part No Description Trunnion pivot bracket Note) -S03 -S04 -S06 -S0 Double clevis pivot bracket Note) Order trunnion pivot brackets per cylinder. Trunnion pivot bracket TO TZ TX TO Z + / Stroke TF T øtd TY 4 x øtt Part no. TS TC T TL TU TC TX TE TO TR TT TS T TF Z TD0 -S S S S TU TL T x øtr TU Without ir Cushion Z Double clevis pivot bracket DX Z + Stroke D DD 90 D DS 4 x ødt DO DC DE DO DU DL D 4 x ødr DU Part no D D DL DU DC DX DE DO DR DT DS D Z DD Without ir Cushion Z Rotating ngle , , , Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the Z dimension is longer than the cylinder with air cushion as follows: ø3, ø40: +3 mm, ø50, ø63: +4 mm, ø80, ø00: +5 mm Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm 9

15 ir Cylinder: Type Double cting, Single Rod Series Dimensions of ccessories Rod end nut () 30 NX D d Part no. d C D NT-03 3 M0 x NT M4 x NT-05 50, 63 M8 x NT M x NT-0 00 M6 x I type Single knuckle joint Part no. MM ND0 øe C 45 U L RR E L MM R U ND0 NX I-03M M0 x I-04M M4 x I-05M 50, M8 x I-08M M x I-0M M6 x racket Combinations Knuckle joint pin Clevis pin Y type Double knuckle joint m øe MM x ød l L Part no. Dd9 L l m d pplicable Clevis Knuckle (Drill through) split pin CD-M03 3, ø3 x 8 l CD-M05 50, ø4 x 5 l CD-M08 80, ø4 x 35 l Note) Split pins and flat washers are included. Part no. ønd0 L U Note) pin, split pins and flat washers are included. ødd9 NX RR NZ E L MM R U ND0 NX NZ Y-03M M0 x Y-04M M4 x Y-05M 50, M8 x Y-08M M x Y-0M M6 x Double cting, Single Rod Double cting, Double Rod W uto Switch racket combination available Refer to the fi gure below. racket for cylinder racket for workpiece Single clevis Double clevis Single knuckle joint Double knuckle joint Clevis pivot bracket Single clevis q w Double clevis e r o Single knuckle joint t y Double knuckle joint u i!0 No. ppearance No. ppearance Single clevis + Double clevis Single knuckle joint + Double knuckle joint q y Single clevis + Double knuckle joint Double knuckle joint + Single clevis w u Double clevis + Single clevis Double knuckle joint + Single knuckle joint e i Double clevis + Single knuckle joint Double clevis + Clevis pivot bracket r o Single knuckle joint + Double clevis Double knuckle joint + Clevis pivot bracket t!0 0

16 ir Cylinder: Type Double cting, Double Rod Series W ø3, ø40, ø50, ø63, ø80, ø00 ow to Order With auto switch With auto switch (uilt-in magnet) L F T Mounting asic xial foot Flange Centre trunnion W MDW L L mm mm mm mm mm mm Port thread type Rc TN NPT TF G Cylinder stroke Refer to Strokes on page Z Z M9W uto switch Without auto switch For applicable auto switches, refer to the table below. Number of auto switches pcs. S pc. 3 3 pcs. n n pcs. Rod boot/cushion None J Nylon tarpaulin (one end) Rod boot JJ Nylon tarpaulin (both ends) K eat resistant tarpaulin (one end) KK eat resistant tarpaulin (both ends) Cushion oth ends N None For details, refer to page. Model without air cushion is designed to include rubber bumpers. The overall length is longer than the cylinder with air cushions because the bumpers are attached to the both sides of the piston as follows. ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm pplicable uto Switches/Refer to the WE catalog or est Pneumatics No. for further information on auto switches. Load voltage uto switch model Lead wire length [m] Electrical Wiring Pre-wired pplicable Type Special function entry Tie-rod and (Output) DC C connector load mounting mounting ( ) (M) (L) (Z) 3-wire (NPN) 4 V 5 V, V M9N IC circuit 3-wire (PNP) M9P Grommet V M9 -wire 00 V, 00 V J5 Terminal 3-wire (NPN) 5 V, V G39 conduit -wire V K39 3-wire (NPN) M9NW Diagnostic indication 5 V, V IC circuit Relay, Yes 3-wire (PNP) M9PW (-colour indication) PLC -wire V M9W 3-wire (NPN) 4 V M9N Water resistant 5 V, V IC circuit Grommet 3-wire (PNP) M9P (-colour indication) -wire V M9 Diagnostic output (-colour indication) 4-wire (NPN) 5 V, V F59F IC circuit Magnetic fi eld resistant -wire P3DW (-colour indication) (Non-polar) P4DW 3-wire 5 V 96 IC circuit Yes (Equiv. to NPN) 00 V 93 Grommet No 00 V or less 90 IC circuit Relay, Yes 00 V, 00 V 54 PLC No V 00 V or less 64 -wire 4 V Terminal 33 conduit 34 PLC Yes 00 V, 00 V DIN terminal 44 Relay, Diagnostic indication (-colour indication) Grommet 59W PLC Solid state auto switch Reed auto switch Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. Please contact SMC regarding water resistant types with the above model numbers. Lead wire length symbols: 0.5 m (Example) M9NW 3 m L (Example) M9NWL m M (Example) M9NWM 5 m Z (Example) M9NWZ Solid state auto switches marked with are produced upon receipt of order. esides the above models, there are some other auto switches that are applicable. For detailed information, please refer to page. Solid state auto switches are also available with a pre-wired connector. Refer to the uto Switch Guide for details. Refer to the uto Switch Guide. The D-9 /M9 /P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-9 /M9 before shipment.) Indicator light

17 ir Cylinder: Type Double cting, Double Rod Series W Double acting, ir cushion Specifications ction Double acting, Single rod Fluid ir Proof pressure.5 MPa Max. operating pressure.0 MPa Min. operating pressure 0.05 MPa mbient and fluid temperature Without auto switch: 0 to 70 C (No freezing) With auto switch: 0 to 60 C Lubrication Not required (Non-lube) Operating piston speed 50 to 000 mm/s llowable stroke tolerance Up to 50: +.0 0, 5 to 000: Cushion Note) oth ends (ir cushion) Port size /8 /4 3/8 / Mounting asic, Foot, Flange, Centre trunnion Note) bsorbable kinetic energy by cushion mechanism is identical to double acting single rod. In case of types with no air cushion, a rubber bumper is used. Double cting, Single Rod Double cting, Double Rod W -X -X6 (For details, refer to pages 5 to 36.) Specifi cations Change of rod end shape eat resistant cylinder ( 0 to 50 C) Strokes stroke 3 5, 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500 uto Switch -XC4 -XC5 -XC7 -XC4 -XC -XC30 -XC35 -XC65 -XC68 With heavy duty scraper eat resistant cylinder ( 0 to 0 C) Tie rod, cushion valve, tie rod nut, etc. made of stainless steel Change of trunnion bracket mounting position Fluororubber seal Rod trunnion With coil scraper Made of stainless steel (Combination of XC7 and XC68) Made of stainless steel (with hard chrome plated piston rod) 40 5, 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, , 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, , 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, 600, 700, , 50, 75, 00, 5, 50, 75, 00, 50, 300, 350, 400, 450, 500, 600, 700, 800 Intermediate strokes are available. (No spacer is used.) ccessories For special port location (-XC3), the mounting bracket and port location can be determined using the standard product corresponding to the operating conditions. For made of stainless steel (-XC6), use made of stainless steel (with hard chrome plated piston rod) (-XC68) that the surface treatment is performed on the piston rod with the same specifications. Refer to pages 7 and for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Operating range Minimum stroke for auto switch mounting uto switch mounting brackets/part no. Water Resistant ir Cylinder Water resistant air cylinders are also available in Series, which are suitable for use on machine tools in an atmosphere with coolant and applicable to food machinery and automobile washing equipment in an environment with water splashes. Please refer to the catalogue in our website Mounting asic Foot Flange Centre trunnion Rod end nut Option Material Max. ambient temp. J Nylon tarpaulin 70 C K eat resistant tarpaulin 0 C Max. ambient temperature for rod boot itself Foot -L03 -L04 -L05 -L06 -L08 -L0 Flange -F03 -F04 -F05 -F06 -F08 -F0 Order two foots per cylinder. Single knuckle joint Double knuckle joint (with pin) Rod boot Material of Rod oot Mounting rackets/part No.

18 Series W Theoretical Force (Unit: N) OUT IN Rod diameter Operating direction Piston area [mm ] Note) Theoretical force [N] = Pressure [MPa] x Piston area [mm ] Operating pressure [MPa] IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT IN, OUT Weights/luminium Tube [kg] asic asic weight Foot Flange Trunnion dditional weight per 50 mm of stroke ll mounting bracket Single knuckle joint ccessories Double knuckle joint (with pin) Calculation Example) W3-00Z (asic, ø3, 00 stroke) asic weight 0.56 (asic, ø3) dditional weight 0.5/50 stroke Cylinder stroke 00 stroke x 00/50 = 0.86 kg 3

19 ir Cylinder: Type Double cting, Double Rod Series W Construction!6! y q!0!3 o w e t!!7 r!5 u i!4 Double cting, Single Rod ø3 Double cting, Double Rod W Component Parts No. Description Material Q ty Note Rod cover luminium die-cast Trivalent chromated Cylinder tube luminium alloy ard anodised 3 Piston rod Carbon steel ard chrome plating 4 Piston luminium alloy 5 Cushion ring luminium alloy nodised 6 ushing earing alloy 7 Cushion valve Steel wire Trivalent zinc chromated 8 Retaining ring Steel for spring ø40 to 00 9 Tie rod Carbon steel 4 Trivalent zinc chromated Replacement Parts/Seal Kit Kit no. 3 W3Z PS 40 CW40Z PS 50 CW50Z PS 63 CW63Z PS 80 CW80Z PS 00 CW00Z PS Contents Set of the nos.!,!,!3,!5 Seal kits consist of items!,!,!3 and!5, and can be ordered by using the seal kit number corresponding to each bore size. Trunnion type should not be disassembled. (Refer to page 37.) The seal kit includes a grease pack (0 g for ø3 to ø50, 0 g for ø63 and ø80, 30 g for ø00). Order with the following part number when only the grease pack is needed. Grease pack part number: GR-S-00 (0 g), GR-S-00 (0 g) No. Description Material Q ty Note 0 Tie rod nut Carbon steel 8 Trivalent zinc chromated Rod seal NR Piston seal NR 3 Cushion seal Urethane 4 Cushion valve seal NR 5 Cylinder tube gasket NR 6 Rod end nut Rolled steel Trivalent zinc chromated 7 Magnet () uto Switch 4

20 Series W asic/() V Port W Cushion valve øe Width across flats K G x P G Width across flats K C øe ød ød øe C MM Width across flats K x 4 x L M J L F N N F K S + Stroke + Stroke ZZ + x Stroke MM Width across flats ød øe With rod boot l f h Width across flats K G x P G Width across flats K ød øe ød ød øe ød With Rod oot 5 Stroke range MM Width across flats L K l f N N f l + Stroke K h S + Stroke h + Stroke ZZ + x Stroke L MM Width across flats L C D E F G J K K M MM N P S V W ZZ 3 Up to M6 x M0 x.5 7 / Up to M6 x M4 x.5 7 / Up to M8 x M8 x / Up to M8 x M8 x / Up to M0 x M x / Up to M0 x M6 x.5 38 / l h d e f to 5 to 0 to 5 to 0 to 30 to 40 to 50 to 60 to 70 to 80 to 90 to to 5 to 0 to 5 to 0 to 30 to 40 to 50 to 60 to 70 to 80 to 90 to Note) ZZ indicates dimensions for double side rod boot. to 50 5 to 00 0 to 50 ZZ Note) 5 to 0 to 30 to 40 to 50 to 60 to 70 to 80 to 90 to Model without air cushion is designed to include rubber bumpers. Since the bumpers are attached to the both sides of the piston, the overall length is longer than the cylinder with air cushion as follows: ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm

21 ir Cylinder: Type Double cting, Double Rod Series W : With Mounting racket Refer to basic mounting () for other dimensions and with rod boot. Foot/(L) Port Cushion needle Double cting, Single Rod Front flange/(f) Port LX LZ L LY Cushion needle 4 x øfd LT Y X FT Foot LS + Stroke Stroke range X 4 x øld Y X Y LD L LS LT LX LY LZ 3 Up to Up to Up to Up to Up to Up to FY F Double cting, Double Rod FX FZ Port Cushion needle TY øtde8 øfd W uto Switch Centre trunnion/(t) Front Flange Stroke range F FD FT FX FY FZ Fd 3 Up to Up to Up to Up to Up to Up to Z + / Stroke TX TZ Model without air cushion is designed to include rubber bumpers. The overall length is longer than the cylinder with air cushion as follows because the bumpers are attached to the both sides of the piston; ø3, ø40: +6 mm, ø50, ø63: +8 mm, ø80, ø00: +0 mm Model without air cushion is designed to include rubber bumpers. The overall length is longer than the cylinder with air cushion as follows because the bumpers are attached to the both sides of the piston; ø3, ø40: +3 mm, ø50, ø63: +4 mm, ø80, ø00: +5 mm (For trunnion mounting) TT Centre Trunnion Stroke TDe8 TT TX TY TZ range Z 3 Up to Up to Up to Up to Up to Up to

22 Series uto Switch Mounting uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight <and mounting> D-3 /G39/K39 <Tie-rod mounting> D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-9 /9 V D-Z7 /Z80 D-Y59 /Y69 /Y7P/Y7PV D-Y7 W/Y7 WV/Y7 s uto switch s uto switch t s t t D-44 D-5 /6 D-59W uto switch s uto switch t D-F5 /J5 D-F5 W/J59W/F5 D-F59F/F5NT s uto switch t D-P3DW s uto switch t D-P4DW s uto switch t 7

23 uto Switch Mounting Series uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight uto Switch Proper Mounting Position uto D-Z7 switch D-M9 D-Z8 model D-M9 V D-M9 W D-9 D-5 D-F5 D-3 D-Y59 D-M9 WV D-9 V D-6 D-59W D-44 D-Y69 D-J5 D-F5NT D-J5 D-G39 D-Y7P D-F59F D-Y7PV D-M9 D-K39 D-Y7 D-M9 V D-Y7 W D-Y7 WV D-P3DW D-P4DW Models without air cushion have different dimensions for auto switch proper mounting positions ( and ). dd the following values to both and : 3 mm (ø 3 and 40), 4 mm (ø50 and 63), 5 mm (ø80 and 00). Note) djust the auto switch after confirming the operating conditions in the actual setting. uto Switch Proper Mounting eight uto switch model D-M9 D-M9 W D-M9 D-9 Operating Range uto switch model D-M9 /M9 V D-M9 W/M9 WV D-M9 /M9 V D-9 /9 V D-Z7 /Z D-5 / D-59W D-3 / D-Y59 /Y69 D-Y7P/Y7 V D-Y7 W/Y7 WV D-Y7 D-F5 /J5 D-F5 W/J59W D-F5/F5NT D-F59F D-9 V D-M9 V D-M9 WV D-M9 V D-5 D-6 D-59W D-F5 D-J5 D-F59F D-F5 W D-J59W D-F5 D-F5NT s t s t s t s t s t s t s t s t s t s t s t D-G39/K D-P3DW D-P4DW Values which include hysteresis are for guideline purposes only, they are not a guarantee (assuming approximately ±30% dispersion) and may change substantially depending on the ambient environment. D-3 D-G39 D-K39 D-44 D-Z7 D-Z80 D-Y59 D-Y7P D-Y7 W D-Y7 D-Y69 D-Y7PV D-Y7 WV D-P3DW D-P4DW 8 Double cting, Single Rod Double cting, Double Rod W uto Switch

24 Series Minimum Stroke for uto Switch Mounting/Mounting rackets Except Centre Trunnion uto switch model D-M9 D-M9 W D-M9 V D-M9 WV D-M9 D-M9 V D-9 D-9 V D-3 D-G39 D-K39 D-44 D-5 D-6 D-59W D-F5 D-J5 D-F5 W D-J59W D-F5 D-F59F D-F5NT D-Z7 D-Z80 D-Y59 D-Y7P D-Y7 W Number of auto switches (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n: Number of auto switches Mounting brackets except centre trunnion ø3, ø40, ø50, ø63 ø80, ø00 Note ) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. 9 5 (n ) (n =, 4, 6, 8 ) Note ) 0 (n ) (n =, 4, 6, 8 ) Note ) 5 (n ) (n =, 4, 6, 8 ) Note ) 5 (n ) (n =, 4, 6, 8 ) Note ) 5 (n ) (n =, 4, 6, 8 ) Note ) n (n ) (n =, 4, 6, 8 ) Note ) (Different surfaces) 35 (Same surface) 00 n (Different surfaces) (n ) (n =, 3, 4 ) n (Same surface) (n ) (n =, 3, 4 ) 0 (Different surfaces) 35 (Same surface) 55 n (Different surfaces) (n ) (n =, 3, 4 ) n (Same surface) (n ) (n =, 3, 4 ) 0 (Different surfaces, same surface) 5 0 n (Different surfaces) 0 (n ) (n ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (Different surfaces, same surface) 0 5 (n ) (n ) n (Same surface) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) 5 5 (Different surfaces, same surface) 5 5 n (Same surface) (n ) (n ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) 0 5 (Different surfaces, same surface) 5 5 n (Same surface) (n ) (n ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) 0 5 (Different surfaces, same surface) 5 n (n ) (n =, 4, 6, 8 ) Note )

25 uto Switch Mounting Series Minimum Stroke for uto Switch Mounting/Mounting rackets Except Centre Trunnion uto switch model D-Y69 D-Y7PV D-Y7 WV D-Y7 D-P3DW D-P4DW n: Number of auto switches Note ) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. uto switch model D-M9 W D-M9 V D-M9 WV D-M9 D-M9 V D-9 D-9 V Number of auto switches (Different surfaces, same surface) n (Different surfaces, same surface) n Number of auto switches (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n (Different surfaces, same surface) n Mounting brackets except centre trunnion ø3, ø40 ø50, ø63 ø80, ø00 Note ) When n is an odd number, a multiple of 4 that is larger than this odd number is used for the calculation. 0 (n ) (n =, 4, 6, 8 ) Note ) 0 (n ) (n =, 4, 6, 8 ) Note ) (Different surfaces), 5 (Same surface) 45 5 n (Different surfaces) n (Same surface) (Different surfaces, same surface) n (n ) (n =, 4, 6, 8 ) Note ) (n ) (n ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) 5 (n ) (n =, 4, 6, 8 ) Note ) Minimum Stroke for uto Switch Mounting/Centre Trunnion n: Number of auto switches Centre trunnion ø3 ø40 ø50 ø63 ø80 ø (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) Double cting, Single Rod Double cting, Double Rod W uto Switch 0

26 Series Minimum Stroke for uto Switch Mounting/Centre Trunnion Note ) When n is an odd number, an even number that is one larger than this odd number is used for the calculation. Note ) When n is an odd number, a multiple of 4 that is larger than this odd number is used for the calculation. n: Number of auto switches uto switch model Number of auto switches ø3 ø40 Centre trunnion ø50 ø63 ø80 ø00 (Different surfaces) (Same surface) D (n ) (n ) (n ) (n ) (n ) n (Different surfaces) D-G39 (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) D-K (n ) (n ) (n ) (n ) (n ) n (Same surface) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (Different surfaces) (Same surface) D (n ) (n ) (n ) (n ) n (Different surfaces) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) n (Same surface) (n ) (n ) (n ) (n ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) (n =, 4, 6, 8 ) Note ) D-5 D-6 D-59W D-F5 /J5 D-F5 W D-J59W D-F5 D-F59F D-F5NTL D-Z7 D-Z80 D-Y59 D-Y7P D-Y7 W D-Y69 D-Y7PV D-Y7 WV D-Y7 D-P3DW D-P4DW (Different surfaces, same surface) n (Same surface) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (Different surfaces, same surface) n (Same surface) (n 4) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (Different surfaces, same surface) n (Same surface) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (Different surfaces, same surface) n (Same surface) (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (Different surfaces, same surface) n (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (Different surfaces, same surface) n (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (Different surfaces, same surface) n (n 4) (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (Different surfaces, same surface) n (Different surfaces, same surface) n (n 4) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n 4) (n 4) (n 4) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note ) (n = 4, 8,, 6 ) Note )

27 uto Switch Mounting Series uto Switch Mounting rackets/part No. uto switch model D-M9 W/M9 WV D-M9 /M9 V D-9 /9 V D-M9 /M9 V D-3 /44 D-G39/K39 D-5 /6 /59W D-F5 /J5 D-F5 W/J59W D-F59F/F5 D-F5NT ø3 ø40 ø50 ø63 ø80 ø T-03 T-03 T-05 T-05 T-06 T-06 D-P3DW 9-03S 9-03S 9-050S 9-050S 9T-063S 9T-063S D-P4DW 3T-040 3T-040 3T-050 3T-050 3T-080 3T-080 D-Z7 /Z80 D-Y59 /Y69 D-Y7P/Y7PV D-Y7 W/Y7 WV D-Y [Stainless Steel Mounting Screw] The following stainless steel mounting screw kit (including set screws) is available. Use it in accordance with the operating environment. (Since the auto switch mounting bracket is not included, order it separately.) : For D-5/6/F5/J5 types Note ) Refer to the uto Switch Guide for details on the. The above stainless steel screws are used when a cylinder is shipped with the D-F5 auto switch. When only on auto switch is shipped independently, the is attached. Note ) When using the D-M9 (V) or Y7, do not use the steel set screws which are included with the auto switch mounting brackets above (5-03, 7-, 4-, 4- ). Order a stainless steel screw kit () separately, and use the M4 x 6 L stainless steel set screws included in the. The figure shows the mounting example for the D-9 (V)/M9 (V)/ M9 W(V)/M9 (V). Double cting, Single Rod Double cting, Double Rod W uto Switch Other than the applicable auto switches listed in ow to Order, the following auto switches are mountable. Refer to the uto Switch Guide for the detailed specifications. Type Model Electrical entry Features Reed D-93V/96V Grommet (Perpendicular) D-90V Without indicator light D-53/56/Z73/Z76 Grommet (In-line) D-67/Z80 Without indicator light D-M9NV/M9PV/M9V D-Y69/Y69/Y7PV D-M9NWV/M9PWV/M9WV Diagnostic indication Grommet (Perpendicular) D-Y7NWV/Y7PWV/Y7WV (-colour indication) D-M9NV/M9PV/M9V Water resistant (-colour indication) D-P4DW Magnetic fi eld resistant (-colour Solid state D-F59/F5P/J59 D-Y59/Y59/Y7P D-Y7 D-F59W/F5PW/J59W Diagnostic indication Grommet (In-line) D-Y7NW/Y7PW/Y7W (-colour indication) D-F5/Y7 Water resistant (-colour indication) D-F5NT With timer D-P5DW Magnetic field resistant (-colour indication) With pre-wired connector is also available for solid state switches. For details, refer to the uto Switch Guide. Normally closed (NC = b contact) solid state auto switches (D-F9G/F9/Y7G/Y7) are also available. For details, refer to pages the uto Switch Guide.

28 Prior to Use uto Switch Connection and Example Sink Input Specifications Source Input Specifications 3-wire, NPN rown Input 3-wire, PNP rown Input uto switch lack lue COM (PLC internal circuit) uto switch lack lue COM (PLC internal circuit) -wire rown Input -wire rown COM uto switch uto switch lue lue COM Input (PLC internal circuit) (PLC internal circuit) Connect according to the applicable PLC input specifi cations, as the connection method will vary depending on the PLC input specifi cations. Example of ND (Series) and OR (Parallel) Connection When using solid state auto switches, ensure the application is set up so the signals for the fi rst 50 ms are invalid. 3-wire ND connection for NPN output (Using relays) rown Relay Load lack uto switch lue rown (Performed with auto switches only) rown lack Load uto switch lue rown 3-wire OR connection for NPN output rown uto switch lack Load lue rown uto switch lack lue uto switch lack lue uto switch lack lue 3-wire ND connection for PNP output (Using relays) rown Relay lack uto switch lue (Performed with auto switches only) rown lack uto switch lue 3-wire OR connection for PNP output rown lack uto switch lue rown rown rown uto switch lack lue Load uto switch lack Load lue uto switch lack lue Load -wire ND connection uto switch uto switch 3 rown lue rown lue Load When two auto switches are connected in series, a load may malfunction because the load voltage will decline when in the ON state. The indicator lights will light up when both of the auto switches are in the ON state. uto switches with load voltage less than 0 V cannot be used. Load voltage at ON = Power supply voltage Residual voltage x pcs. = 4 V 4 V x pcs. = 6 V Example: Power supply is 4 VDC Internal voltage drop in auto switch is 4 V. -wire OR connection uto switch uto switch rown lue rown lue Load (Solid state) When two auto switches are connected in parallel, malfunction may occur because the load voltage will increase when in the OFF state. Load voltage at OFF = Leakage current x pcs. x Load impedance = m x pcs. x 3 kω = 6 V Example: Load impedance is 3 kω. Leakage current from auto switch is m. (Reed) ecause there is no current leakage, the load voltage will not increase when turned OFF. owever, depending on the number of auto switches in the ON state, the indicator lights may sometimes grow dim or not light up, due to the dispersion and reduction of the current fl owing to the auto switches.

29 uto Switch Double cting, Double Rod W Double cting, Single Rod 4

30 Series Simple Specials/ Please contact SMC for detailed specifi cations, delivery and prices. Simple Specials The following special specifi cations can be ordered as a simplifi ed Made-to-Order. There is a specifi cation sheet available on paper and CD-ROM. Please contact your SMC sales representatives if necessary. ( type) Specifications Double acting Single rod ir Rubber -X0 to 30 -XC4 Change of rod end shape Change of trunnion bracket mounting position Specifications ir ( type) Double acting Single rod Rubber -X6 eat resistant cylinder ( 0 to 50 C) -XC4 -XC5 -XC7 -XC8 -XC9 -XC0 -XC -XC -XC -XC7 -XC9 -XC30 -XC35 -XC65 -XC68 -X84 With heavy duty scraper eat resistant cylinder ( 0 to 0 C) Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder Fluororubber seal Double clevis and double knuckle joint pins made of stainless steel Double knuckle joint with spring pin Rod trunnion With coil scraper Made of stainless steel (Combination of XC7 and XC68) Made of stainless steel (with hard chrome plated piston rod) Cylinder with heat resistant reed auto switch ( 0 to 0 C) Note) For details, refer to the catalogue in our website 5

31 Simple Specials/ Series ir ( type) Double acting Double rod Rubber Page Double cting, Single Rod Page 7 Page 8 ir ( type) Double acting Double rod Rubber Page Page 9 Double cting, Double Rod W Page 9 Page 9 Page 30 Page 30 Page 3 Page 3 uto Switch Page 3 Page 33 Page 33 Page 33 Page 34 Page 34 Page 34 Page 35 Page 35 Page 36 6

32 Series Simple Specials These changes are dealt with Simple Specials System. Change of Rod End Shape -X0 to X30 Series ction for change of rod end shape Note -Z type Double acting, Single rod X0 to 30 W Double acting, Double rod X0 to 30. SMC will make appropriate arrangements if no dimension, tolerance, or fi nish instructions are given in the diagram.. dimensions marked with will be as follows to the rod diameter (D). Enter any special dimension you desire. Precautions D 6 D mm 6 < D 5 D mm D > 5 D 4 mm 3. In the case of double rod type and single acting retraction type, enter the dimensions when the rod is retracted. : 0 : : : 3 30 C C0.5 ød 30 T W : 4 : 5 : 6 : 7 ørd ørd MM L 30 MM L L L 30 W 30 MM L C0.5 file chamfer C W R sphere TP R sphere ødc 30 T W C0.5 ød R sphere C ød 30 MM L ød C ød : 8 : 9 : 0 : : : 3 : 4 : 5 T W C : 6 : 7 : 8 : 9 L ød MM 30 MM 30 MM 30 MM 30 C 7

33 Simple Specials Series : 0 : : : 3 MM MM L K L 30 ød MM MM T L ød L K 30 : 4 : 5 : 6 : 7 ød MM MM ød T L 30 ød 30 L K C ørd L 30 MM ød L 30 W Double cting, Single Rod Double cting, Double Rod W : 8 : 9 : 30 MM ød L 30 MM L L 30 W T W MM T 30 uto Switch Change of Trunnion racket Mounting Position The position for mounting the trunnion pivot bracket on the cylinder can be moved from the standard mounting position to any desired position. Series Description Model ction Note -Z Double acting, Single rod type W Double acting, Double rod Precautions. Specify Z + / stroke in the case the trunnion bracket position is not -XC4, or trunnion is not a centre trunnion.. SMC will make appropriate arrangements if no dimension, tolerance, or finish instructions are given in the diagram. 3. The possible range of trunnion bracket mounting position is indicated in the table below. 4. Some trunnion mounting positions do not allow auto switch mounting. Please consult with SMC for more information. (Z + / stroke) = Trunnion position for -XC4 -XC4 Trunnion position for -XC4 Z + / stroke For -XC4 Reference For -XC4 For -XC4 Minimum Maximum (Centre trunnion) Minimum stroke Stroke Stroke 89 + / stroke Stroke Stroke 93 + / stroke Stroke Stroke 05 + / stroke Stroke Stroke 05 + / stroke Stroke Stroke 9 + / stroke Stroke Stroke 9 + / stroke 8

34 Series Please contact SMC for detailed dimensions, specifi cations and lead times. eat Resistant Cylinder ( 0 to 50 C) -X6 ir cylinder which changed the seal material and grease, so that it could be used even at higher temperature up to 50 from 0 C. pplicable Series Series Description Model ction Note -Z type W Double acting, Single rod Double acting, Double rod Except without air cushion and with auto switch Except without air cushion and with auto switch Note ) Operate without lubrication from a pneumatic system lubricator. Note ) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note 3) In principle, it is impossible to make built-in magnet type and the one with auto switch. ut, as for the one with auto switch, and the heat resistant cylinder with heat resistant auto switch, please contact SMC. Note 4) Piston speed is ranged from 50 to 500 mm/s. Specifications mbient temperature range 0 C to 50 C Seal material Fluororubber Grease eat resistant grease Specifications other than above and external dimensions Warning Precautions Same as standard type e aware that smoking cigarettes etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. ow to Order model no. X6 eat resistant cylinder With eavy Duty Scraper -XC4 It is suitable for using cylinders under the environment, where there are much dusts in a surrounding area by using a heavy duty scraper on the wiper ring, or using cylinders under earth and sand exposed to the die-casted equipment, construction machinery, or industrial vehicles. pplicable Series Series Description Model ction Note -Z type Double acting, Single rod W Double acting, Double rod Construction (Dimensions are the same as standard.) ow to Order model no. Specifications: Same as standard type 3 With heavy duty scraper (SC scraper) XC4 Caution Do not replace heavy duty scrapers. Since heavy duty scrapers are press-fi t, do not replace the cover only, but rather the entire rod cover assembly. eat Resistant Cylinder ( 0 to 0 C) F ZZ + Stroke F ZZ XC5 Cylinder which changed the seal material for heat resistance (up to 0 C) in order to use under the severe ambient temperature condition which exceeds the standard specifi cations of 0 to 70 C. pplicable Series Series Description Model ction -Z type W ow to Order model no. 9 eat resistant cylinder Double acting, Single rod Double acting, Double rod XC5 Specifications mbient temperature range 0 C to 0 C Seal material Fluororubber With auto switch Unavailable Note ) Specifications other than above and external dimensions Same as standard type Note ) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note ) Manufacturing built-in magnet type and the one with auto switch is impossible. Note 3) Material of rod boot is heat resistant tarpaulin.

35 Series 4 Tie-rod, Cushion Valve, Tie-rod Nut, etc. Made of Stainless Steel -XC7 When using in locations where the rust generation or corrosion likelihood exists, the standard parts material have been partly changed to the stainless steel. pplicable Series Series Description Model ction -Z type W ow to Order model no. Tie-rod, Cushion valve, Tie-rod nut, etc. made of stainless steel 5 Double acting, Single rod Double acting, Double rod XC7 Specifications Component parts changed to stainless steel djustable Stroke Cylinder/djustable Extension Type Specifications other than above Dimensions Tie-rod, Tie-rod nut, Mounting bracket nut, Cushion valve, Lock nut Same as standard type Same as standard type -XC8 Double cting, Single Rod Double cting, Double Rod W It adjusts the extending stroke by the stroke adjustable mechanism equipped in the head side. (fter the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.) pplicable Series Series Description Model ction Note -Z type ow to Order Double acting Except head fl ange and clevis types Except head fl ange and clevis types Specifications Stroke adjustment symbol Stroke adjustment range 0 to 5 0 to 50 Specifications other than above Same as standard type Mounting style Stroke Suffix Stroke adjustment symbol Z XC8 djustable stroke cylinder/djustable extension type uto Switch djustable range Warning Precautions. When the cylinder is operating, if something gets caught between the stopper bracket for adjusting the stroke and the cylinder body, it could cause bodily injury or damage the peripheral equipment. Therefore, take preventive measures as necessary, such as installing a protective cover.. To adjust the stroke, make sure to secure the wrench flats of the stopper bracket by a wrench, etc. before loosening the lock nut. If the lock nut is loosened without securing the stopper bracket, be aware that the area that joins the load to the piston rod or the area in which the piston rod is joined with the load side and the stopper bracket side could loosen first. It may cause an accident or malfunction. Dimensions (Dimensions other than below are the same as standard type.) Width across flats Width across flats MG 4 MK Stroke ML + djustment M + Stroke + djustment ZZ + x Stroke + djustment MN ømi ø00 ore size MG M MI MK ML MN ZZ M8 x M0 x M4 x M4 x M6 x M0 x

36 Series 6 djustable Stroke Cylinder/djustable Retraction Type -XC9 The retracting stroke of the cylinder can be adjusted by the adjustment bolt. pplicable Series Series Description Model ction Note -Z type ow to Order Double acting, Single rod Except head fl ange and clevis types Specifications Stroke adjustment symbol Stroke adjustment range 0 to 5 0 to 50 Specifications other than above Same as standard type Mounting style Stroke Suffix Stroke adjustment symbol Z XC9 Except head fl ange and clevis types djustable stroke cylinder/djustable retraction type (fter the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.) Caution Precautions. When air is supplied to the cylinder, if the stroke adjustment bolt is loosened in excess of the allowable stroke adjustment amount, be aware that the stroke adjustment bolt could fl y out or air could be discharged, which could injure personnel or damage the peripheral equipment. Dimensions (Dimensions other than below are the same as standard type.) djustable range. djust the stroke when the cylinder is not pressurised. If it is adjusted in the pressurised state, the seal of the adjustment section could become deformed, leading to air leakage. ZZ + Stroke + djustment b mm c d + djustment Width across flats ka ore size b c d ka mm ZZ M x M x M6 x M0 x M4 x M4 x Dual Stroke Cylinder/Double Rod Type -XC0 Two cylinders are constructed as one cylinder in a back-to-back confi guration allowing the cylinder stroke to be controlled in three steps. pplicable Series Series Description Model ction Note -Z type ow to Order Except clevis and trunnion types DC Double acting, Single rod Except clevis and trunnion types Specifications to 00 Maximum manufacturable stroke Specifications other than above Mounting style Stroke Suffix + Stroke Suffix Z XC0 Function When air pressure is supplied to ports and, both and strokes retract. stroke Dual stroke cylinder D C Same as standard type When air pressure is supplied to ports and, out strokes. D C stroke When air pressure is supplied to ports and, out strokes. stroke D C stroke When air pressure is supplied to ports and, both strokes and out strokes. Dimensions (Dimensions other than below are the same as standard type.) 3 Stroke GC N N S + Stroke ( + ) ZZ + Stroke ( + ) Stroke GC N N S ZZ

37 Series 8 Dual Stroke Cylinder/Single Rod Type Two cylinders can be integrated by connecting them in line, and the cylinder stroke can be controlled in two stages in both directions. Do not operate the CS series at twice the output. pplicable Series Series Description Model ction Note -Z type Stroke Double acting, Single rod N GC N S + Stroke ( + ) ZZ + Stroke ( + ) Except trunnion type ow to Order Mounting style Stroke Suffix + Stroke - Suffix Z XC Except trunnion type Dimensions (Dimensions other than below are the same as standard type.) tmospheric release port Specifications: Same as standard type Please contact SMC for each manufacturable stroke length. Stroke Dual stroke cylinder/single rod -XC GC N N S ZZ Double cting, Single Rod Double cting, Double Rod W uto Switch Functional description of dual stroke cylinder stroke or stroke operation can be made individually. - stroke stroke stroke stroke C stroke C C C stroke ) Initial state (0 stroke position) ) st stage ( stroke operation) When the air pressure is supplied from the port, the rod operates the stroke. 3) nd stage (- stroke operation) Following the st stage, when the air pressure is supplied from the port, the rod operates the - stroke. 4) Cylinder retraction When the air pressure is supplied from the port, the rod retracts completely. stroke stroke stroke stroke C stroke C C stroke C stroke operation ) Initial state (0 stroke position) ) Operation When the air pressure is supplied from the port, the rod operates the stroke. stroke operation ) Initial state (0 stroke position) ) Operation When the air pressure is supplied from the port, the rod operates the stroke. Double output is possible. W W stroke stroke C stroke C ) Initial state (0 stroke position) ) Double output When the air pressure is supplied to the and ports at the same time, the double output can be obtained in the stroke range. Caution Precautions. Do not supply air until the cylinder is fixed with the attached bolt.. If air is supplied without securing the cylinder, the cylinder could lurch, posing the risk of bodily injury or damage to the peripheral equipment. 3

38 Series 9 Tandem Cylinder -XC This is a cylinder produced with two air cylinders in line allowing double the output force. pplicable Series Series Description Model ction Note -Z type Double acting, Single rod Specifications: Same as standard type Function ow to Order model no. XC Tandem cylinder Dimensions (Dimensions other than below are the same as standard type.) When air pressure is supplied to ports and, the output force is doubled in the retract stroke. When air pressure is supplied to ports and, the output force is doubled in the out stroke. GC N N S + ( x Stroke) ZZ + ( x Stroke) GC N N S ZZ Fluororubber Seal pplicable Series Series Description Model ction Note -Z type W Double acting, Single rod Double acting, Double rod Specifications Seal material mbient temperature range -XC Fluororubber With auto switch Note) : 0 C to 60 C (No freezing) Without auto switch : 0 C to 70 C ow to Order model no. Fluororubber seal XC Specifications other than above and external dimensions Same as standard type Note ) Please contact SMC, as the type of chemical and the operating temperature may not allow the use of this product. Note ) Cylinders with auto switches can also be produced; however, auto switch related parts (auto switch units, mounting brackets, built-in magnets) are the same as standard products. efore using these, please contact SMC regarding their suitability for the operating environment. Note 3) No cushion is equipped for N type. -XC7 Double Clevis and Double Knuckle Joint Pins Made of Stainless Steel To prevent the oscillating portion of the double clevis or the double knuckle joint from rusting, the material of the pin and the retaining ring has been changed to stainless steel. pplicable Series Series Description Model ction -Z type Double acting, Single rod Specifications Mounting style Pin and retaining ring material Specifications other than above Only double clevis type (D), double knuckle joint Stainless steel 304 Same as standard type ow to Order D model no. XC7 Double clevis type Double clevis pin made of stainless steel Y 03M, 04M, 05M, 08M, 0M XC7 Double knuckle joint Double knuckle joint pin made of stainless steel CD M03, M05, M08 XC7 33 Clevis pin Knuckle pin Clevis pin made of stainless steel Knuckle pin

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type. ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 10 % lighter RoS (ø 40-100 stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type. 0.91 kg Reduced weight by changing the shape

More information

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover.

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter New Series Existing model.69 kg.0 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set

More information

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125 ir Cylinder M Series ø3, ø40, ø50, ø63, ø80, ø00, ø5 RoHS 0% lighter CJ (ø40-00 stroke) Weight M Series 0.9 kg CJP CJ JCM CM Current model CM3 CG.0 kg CG3 JM Reduced weight by changing the shape of the

More information

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing

More information

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT. ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.

More information

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover. Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.

More information

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125 M..3 : PM Page i CT.ES-8 F ir Cylinder ø newly introduced Series M ø,ø,ø,ø,ø,ø,ø Series M, MW, MK, Double acting single rod Double acting double rod Double acting non-rotating rod ø newly introduced (Double

More information

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy

More information

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø 20, ø 25, ø 32, ø 40, ø 50, ø 63, ø 80, ø 100 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread

More information

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø20, ø25, ø32, ø40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of auto

More information

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover

More information

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added. ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side

More information

15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to

15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to Air ylinder A Series ø40, ø50, ø63, ø80, ø100 RoHS Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to (ø50-50 stroke) 15% lighter 1.31kg Easy air cushion control

More information

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected.

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected. ir Cylinder Series ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS emale rod end available as standard Rod end types suitable for the application can be selected. emale thread Easy fine adjustment of auto

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø 20, ø 25, ø 32, ø 40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional

More information

Air Cylinder Series CG1

Air Cylinder Series CG1 ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison

More information

Square Tube Type Air Cylinder

Square Tube Type Air Cylinder Standard: Double cting Single Rod Series C6 Square Tube Type ir Cylinder Series 1 ø, ø, ø, ø, ø, ø Single rod type Series 1 Double rod type Series 1W Non-rotating rod type Series 1K CJ1 CJP CJ2 CM2 C8

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) MGJ -Z W MGQ MGG MGC MGF MGT 23 D- -X Non-rotating Double Power Cylinder Double extension output

More information

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) 23 MGJ -Z W MGQ MGG MGC MGF MGT D- -X Tube rod diameter External dimension Non-rotating Double

More information

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm) ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore

More information

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism)

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism) Non-rotating Double Power Cylinder Series Double Power Cylinder Series R (without non-rotating mechanism) 2 Non-rotating Double Power Cylinder Double extension output power!! Our unique construction doubles

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder Series CJ2 ø, ø, ø CJ1 CJP Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. Series

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Air Cylinder Series CG1

Air Cylinder Series CG1 ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison

More information

Round Type Hydraulic Cylinder

Round Type Hydraulic Cylinder Round Type ydraulic Cylinder CM Series CQ CK C CM CS C C D- CM Series ominal pressure: 3. MPa ore size :,,, 3 3. MPa Round Type ydraulic Cylinder CM Series ø, ø, ø, ø pplicable uto Switches/Refer to pages

More information

Round Type Hydraulic Cylinder

Round Type Hydraulic Cylinder Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L

More information

Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil.

Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil. Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 4-4 www.cmafh.com With auto switch F G C D U CM CDM With auto switch (uilt-in magnet) Mounting style asic style

More information

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø, ø, ø, ø, ø Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø- stroke) % lighter 1.31kg ew 1.54 kg Existing model Easy air cushion control

More information

How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA

How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) - www.cmafh.com CDG1 With auto switch (uilt-in magnet) Mounting style asic style L xial foot style F Rod side

More information

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm) Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting. Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common

More information

Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet

Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet L F Mounting style asic style xial foot style Rod side flange style With auto switch CVJ L CDVJ L 6 6 How to Order pplicable uto Switches/Refer to pages to for further information on auto switches. Type

More information

Series RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Series RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series CQS ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series

More information

Mini Free Mount Cylinder

Mini Free Mount Cylinder Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

More information

Series MBB ø32, ø40, ø50, ø63, ø80, ø100

Series MBB ø32, ø40, ø50, ø63, ø80, ø100 Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis

More information

Compact Cylinder/Plate type

Compact Cylinder/Plate type Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series

More information

1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1

1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1 1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder eries ø, ø, ø Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. eries Variations tandard

More information

22mm Space required between the bottom of the cylinder body and your equipment is reduced.

22mm Space required between the bottom of the cylinder body and your equipment is reduced. Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner

More information

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718.

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718. Courtesy of CM/lodyne/ydradyne Motion Control ydraulic Pneumatic lectrical Mechanical () - www.cmafh.com With auto switch With auto switch (uilt-in magnet) G C CM CM uilt-in Magnet Cylinder Model If a

More information

ISO15552 Cylinders ø32, ø40, ø50, ø63, ø80, ø100, ø125

ISO15552 Cylinders ø32, ø40, ø50, ø63, ø80, ø100, ø125 ISO2 Cylinders ø, ø, ø, ø, ø, ø0, ø CNOMO and circular grooves are on all four sides. Switch can be slid in. Reduced weight due a change in the configuration of the cover Small sized D-M au switch mountable

More information

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

More information

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle

More information

17% Weight. ISO Cylinder. Cycle time shortened. Lightweight. reduced. Series C96 CAT.ES20-242B

17% Weight. ISO Cylinder. Cycle time shortened. Lightweight. reduced. Series C96 CAT.ES20-242B ISO Cylinder ø32, ø40, ø50, ø63, ø80, ø100 Lightweight New series added Standard type, Double rod: Series C96-W Non-rotating rod type, Single rod: Series C96K Double rod: Series C96K-W Smooth Cylinder:

More information

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W. Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series

More information

Series C95 ø32, ø40, ø50, ø63, ø80, ø100

Series C95 ø32, ø40, ø50, ø63, ø80, ø100 ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V Compact Cylinder: Standard Type Double cting, Single Rod,,,,,,,,, How to Order Without auto switch D With auto switch CDQ2 D JW S uilt-in magnet Mounting style Through-hole (Standard) oth ends tapped style

More information

Sine Cylinder. REC Series. ø20, ø25, ø32, ø40. Allows high speed transfer of work with dramatically reduced shock/impact. REA REB REC Smooth

Sine Cylinder. REC Series. ø20, ø25, ø32, ø40. Allows high speed transfer of work with dramatically reduced shock/impact. REA REB REC Smooth Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. RE RE RC Velocity curve Time Sine cylinder Current cylinder Sine Cylinder Series,,, llows rapid transfer

More information

C85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40

C85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40 ISO Cylinder (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 Series: ø32, ø40 RoS Part numbers set for actuators with mounting brackets, rod end brackets and auto switches available. Now it is not necessary

More information

Guide Table. MGF Series

Guide Table. MGF Series Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. Velocity curve RE RE Speed Time Sine cylinder Conventional cylinder 3 Sine Cylinder Series,,, llows rapid

More information

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder.

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder. Compact Guide Cylinder Series ø2,,, ø2,,, ø, ø63,, ø0 Up to Weight reduced by up to 24% with a shorter guide rod and thinner plate 24% Weight reduced! 3 types of bearing can be selected. Slide bearing

More information

Guide Table. ø40, ø63, ø100

Guide Table. ø40, ø63, ø100 Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Elliptical design for space-savings

Elliptical design for space-savings Plate Cylinder Series,,,, By adopting an elliptical piston design, a slim, square shaped body has been achieved, resulting in a space-saving cylinder with unrestricted mounting directions. Elliptical design

More information

Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm

Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot

More information

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Compact Slide. Series MXH ø6, ø10, ø16, ø20 Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations

More information

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43 CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular

More information

Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube

Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube Air ylinder S Series,,,,,, J Series Variations Series Action asic Standard variations Page JP J JM Standard S Series S Series Double acting Single rod S series Double rod SW series 5 548 M M3 G G3 JM M

More information

Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment

Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment Symbol -N B80-S100 Features With built-in magnet. (Standard) With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double

More information

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W. Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 M G M M A S S Series

More information

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size Air Cylinder: tandard eries CG1W,,,,,,, 0 How to Order auto switch auto switch CG1W L N 0 With auto switch CDG1W L N 0 HW N A uilt-in magnet Double acting, double rod type L U Mounting style asic style

More information

Toggle Type Air Gripper

Toggle Type Air Gripper ø2, ø40, ø50, ø6 Ideal for gripping heavy workpiece Toggle mechanism is adopted. Holds workpiece even when pressure drops. The toggle mechanism that activates when the finger closes realizes strong and

More information

Hygienic Design Cylinder

Hygienic Design Cylinder CT.EUS- -UK Hygienic Design Cylinder New Round type Series HY has been added. water resistant cylinder configured for easy cleaning ISO standard type Series HYC asic type Series HYQ With guide Series HYG

More information

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55 55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard

More information

Plate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63

Plate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63 Plate Cylinder MU Series ø, ø, ø, ø, ø It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting RoHS Small auto switch CUJ CU CQS JCQ CQ2 Reduction of labor for work RQ CQM

More information

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPG AND DELIVER TENS OF THOUSANDS OF -STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED

More information

Compact Hydraulic Cylinder

Compact Hydraulic Cylinder ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch

More information

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8 Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole

More information

Magnetically Coupled Rodless Cylinder Slider Type: Ball Bushing Bearing. How to Order CY1L 25 H 300 J79W. Load voltage 5 V 200V 100 V 12 V 5 V, 12 V

Magnetically Coupled Rodless Cylinder Slider Type: Ball Bushing Bearing. How to Order CY1L 25 H 300 J79W. Load voltage 5 V 200V 100 V 12 V 5 V, 12 V Magnetically Coupled Rodless Cylinder Slider Type: all ushing earing Series CY1L ø, ø, ø, ø, ø, ø, ø How to Order CY1L H 00 J79W Slider type (all bushing bearing) mm mm mm mm mm mm mm Magnetic holding

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder / Series ø,,,,, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions for ball

More information

Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods

Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 46-54 www.cmafh.com Guide Cylinder Series MGG ø, ø, ø, ø, ø, ø, ø, ø Integration of a basic cylinder and guide

More information

Guide Table. Series MGF

Guide Table. Series MGF Guide Table Series MGF ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø2, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Series standard type and series high precision ball bushing bearing type (except with end lock) products have been remodeled for a lightweight

More information

Brake mechanism added to a stroke reading cylinder which can measure stroke length.

Brake mechanism added to a stroke reading cylinder which can measure stroke length. Stroke Reading Cylinder with rake CE Series ø, ø, ø63, ø, ø rake mechanism added to a stroke reading cylinder which can measure stroke length. CEP1 CE ML Controller/CEU 67 Stroke Reading Cylinder with

More information

Rotary Clamp Cylinder

Rotary Clamp Cylinder Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable

More information

Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.

Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series

More information

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder J/ Series ø, ø, ø, ø, ø, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions

More information

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ D- -X

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ D- -X ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical () 46-4 www.cmafh.com High Power ylinder ø, ø, ø3, ø4, ø, ø, ø, ø 33 RE RE RE Y X RH ourtesy of M/Flodyne/Hydradyne

More information

1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1

1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1 1.20 L INEAR ACTUATOR: AIR CYLINDER A IR CYLINDER BORE SIZES Ø20~100MM Double acting Clean line A substantial reduction in overall length compared to tie bar designed cylinders High velocity Magnetic piston

More information

Rotary Clamp Cylinder

Rotary Clamp Cylinder Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable

More information

Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25

Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25 ISO Cylinder Series C ø, ø0, ø, ø, ø, ø Conforming to ISO and CETOP RPP. Series Variations Standard Series C Series Non-rotating rod Series C ction Double acting Single acting Double acting Rod Single

More information

Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact.

Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø, ø, ø1, ø, ø, ø With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Series Variations

More information

Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page.

Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page. ir Cylinder: With End ock Series C ø, ø, ø, ø, ø Without auto switch With auto switch F G C D T With auto switch Mounting style asic style xial foot style Rod side flange style Head side flange style Single

More information

Compact Guide Cylinder Series MGP

Compact Guide Cylinder Series MGP Compact Guide Cylinder Series MGP ø2, ø, ø, ø, ø, ø, ø, ø,, ø0 MGJ MGP MGQ MGG MGC MGF MGZ MGT Series Variations Series Bearing type Cushion 2 0 Page Standard type MGP With air cushion MGP With end lock

More information

Heavy Duty Stopper Cylinder

Heavy Duty Stopper Cylinder Heavy Duty Stopper Cylinder Series ø, ø32 To stop pallets gently Stopper cylinder with built-in shock absorber Amount of energy absorption can be adjusted to suit the load. Stops the workpiece gently with

More information