Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.

Size: px
Start display at page:

Download "Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W."

Transcription

1 Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series SW Low Friction Series SQ Double acting Single rod Series SQ 9 For the aluminum tubing of bore sizes, and, a new Series S model is now available with reduced weight and self weight deflection. Please consider using the S series. D- -X 9 -X

2 ombinations of Standard Products and Made Series S to Order Specifications Series S : Standard : Made to Order specifications : Special product (ontact SM for details.) : Not available Symbol Standard DS J S-K - XA X5 X6 X7 X9 X6 X3 X4 X5 X6 X7 Specification Standard uilt-in magnet opper and Fluorine-free hange of rod end shape Oversized rod cylinder Heat-resistant cylinder ( to ) old-resistant cylinder Low-speed cylinder (5 to mm/s) Large-bore air-hydro cylinder Special port location With heavy duty scraper Heat-resistant cylinder ( to ) Stainless steel Tie-rod, cushion valve, tie-rod nut and similar parts made of stainless steel Series Action/ Applicable bore size to to to to to to to to to S (Standard) Double acting Single rod to Note) to S (Standard) Double rod Double acting SQ (Low friction) Single rod to to J JP J M G M M A S S X X9 X X X X4 X5 X X6 Adjustable stroke cylinder/adjustable extension type Adjustable stroke cylinder/adjustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder hange of trunnion bracket mounting position hange of tie-rod length Fluororubber seal levis pins with flat washer to Note) X7 Double clevis pins made of stainless steel (Stainless steel 4) to X X X X X X6 X6 Rod side trunnion mounted on the rod cover front With coil scraper Special trunnion axis levis hole with bushing Knuckle fixed with nuts Hard chrome plated stainless steel rod With rod end bracket Note) Applicable I.D.: to, and are available upon request for special order. D X -X

3 Symbol Nil F,, to, L F G D T S L Mounting style asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style enter trunnion style Tubing material Aluminum tube Steel tube Steel tube Tubing material Nil N H Stroke range or less or less or more or more All stroke Note) or less or less Refer to page for the maximum strokes. Note) The tubing material of items with a bore size of and corresponding to the lass Pressure Vessel Act is aluminum tubing. Air ylinder: Standard,, Series S, :,,,,,, :,, How to Order, mm mm mm mm mm mm mm For the aluminum tubing of bore sizes, and, a new Series S model is now available with reduced weight and self weight deflection. Please consider using the S series. Suffix for cylinder Rod boot J K N R H Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushion in rod side With cushion in head side With cushion in both sides Nil ( type has no cushion.) If specifying more than one symbol, indicate them in alphabetically type has no cushion. No symbol indicates no cushion. ushion mm mm mm Made to Order (Refer to page for details.) ylinder stroke (Refer to Maximum Stroke on page.) Port thread type Nil Rc TN NPT TF G Mounting racket Part No. Foot style Flange style Single clevis style Double clevis style S-L S-F S- S-D S-L4 S-F4 S-4 S-D4 S-L6 S-F6 S-6 S-D6 S-L S-F S- S-D S-L S-F S- S-D S-L5 S-F5 S-5 S-D5 S-L S-F S- S-D Order two foot brackets per cylinder. When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. For How to Order with auto switch, refer to page 4. 4

4 Air ylinder: Standard,, Series S JIS Symbol Double acting Made to Order Specifications (For details, refer to pages 373 to 4.) Symbol Specifications XA hange of rod end shape X5 Oversized rod cylinder X6 Heat-resistant cylinder ( to ) X3 Special port location X4 With heavy duty scraper X5 Heat resistant cylinder ( ) X6 Piston rod and rod end nut made of stainless steel X Adjustable stroke cylinder/adjustable extension type X9 Adjustable stroke cylinder/adjustable retraction type X Dual stroke cylinder/double rod type X Dual stroke cylinder/single rod type X4 hange of trunnion bracket mounting position X5 hange of tie-rod length X Fluororubber seal X6 levis pins with flat washer Double clevis pin and double knuckle pin X7 made of stainless steel X Rod side trunnion X With coil scraper X6 Hard chrome plated stainless steel rod X6 With rod end bracket Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion Ambient and fluid temperature Stroke length tolerance, to Air.5 MPa to mm/s Interchangeable,, Turbine oil Note).57 MPa.97 MPa.6 MPa.5 to mm/s None or less st : +., 5 to, st : +.4,, to, st : +. to st : +., to st : +.6 asic style, Foot style, Rod side flange style, Mounting Head side flange style, Single clevis style, Double clevis style, enter trunnion style Note) Item corresponding to lass Pressure Vessel Act is.46 MPa. Maximum Stroke Tubing material or less or less or less or less or less or less or less Note) or less or less or less or less or less or less or less or less or less or less Note) The tubing material of items with a bore size of and corresponding to the lass Pressure Vessel Act is aluminum tubing. Accessory Standard equipment Option Mounting bracket Mounting levis pin, otter pin Rod end nut Single knuckle joint Double knuckle joint (levis pin, otter pin) Rod boot asic style Aluminum tube asic style, Head side flange style Single clevis style, Double clevis style enter trunnion style, Foot style Rod side flange style Foot style Rod side flange style Head side flange style Single clevis style Steel tube asic style Head side flange style Single clevis style Double clevis style enter trunnion style Double clevis style enter trunnion style In the case of using the rod end nut together with the single knuckle joint or double knuckle joint, refer to page 49. Foot style Rod side flange style Note) Note) J JP J M G M M A S S lass Pressure Vessel In the case of exceeding the following strokes, the cylinder is subject to lass Pressure Vessel Act. ylinder stroke, Rod oot Material Symbol Material J Nylon tarpaulin K Heat resistant tarpaulin Maximum ambient temperature Maximum ambient temperature for the rod boot itself. D- -X -X

5 Series S Principal Parts Material and Surface Treatment over Tube Sliding part seal Piston rod Piston,,,,, 4.5 (3.73) 6. (5.).53 (6.4).53 (6.4).9 (6.).3 (.6). (.6).77 Material plate Aluminum alloy arbon steel tube arbon steel tube Note) NR NR NR arbon steel ast iron Aluminum alloy casted (Iron tube: ast iron) Aluminum alloy casted (Iron tube: ast iron). (6.57). (9.9). (.57). (.57).7 (.6) 3. (.6) 3.7 (.).96 Note lack painted Hard anodized Inside: Hard chrome plated Inside: Hard chrome plated Note) JIS O-ring Hard chrome plated Note) For items corresponding to the lass Pressure Vessel Act, the material is Aluminum alloy and the note should state Hard anodized. Mass/Aluminum Tube: (, ) asic mass asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style (levis pin, otter pin) Trunnion style Additional mass per each mm of stroke hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) 4.77 (3.3) 7.57 (5.3) 3.6 (9.4) 3.6 (9.4).6 (.5) 3. (9.37) 3. (.). (kg) Precautions e sure to read before handling. Refer to front matters 54 and 55 for Safety Instructions and pages 3 to for Actuator and Auto Switch Precautions. Warning Do not use the cylinder as a shock absorber. Using the cylinder as a shock absorber may cause damage. aution Do not open the cushion valve excessively. If the cushion valve is rotated excessively in the opening direction (counterclockwise), it could be damaged. e aware that the valve could slip out, or the threads becomes too short. Regarding the installation of a knuckle joint Please contact SM if a knuckle joint must be installed on the piston rod by using the rod end nut. Do not place tape or other objects onto the painted surface of the unit. The paint of the S cylinder is dried naturally, so it may peel off if tape or another object is placed onto it. Single knuckle.9.6. Accessory bracket Double knuckle (Knuckie pin, otter pin).37.. Rod end nut ( ): Denotes the non-lube and air-hydro type. alculation example: SL- asic mass 7.57 (Foot style, ) Additional mass./ stroke ylinder stroke stroke x / =.5 kg Mass/Steel Tube Standard mass Additional mass per each mm of stroke Accessory bracket 44 asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis (levis pin, otter pin) Trunnion style Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut (kg)

6 Air ylinder: Standard,, Series S onstruction J JP J M G M In the case of aluminum tube M A S S In the case of aluminum tube omponent Parts No. Rod cover Head cover Material plate plate Note lack painted lack painted 3 ylinder to Aluminum alloy Hard anodized tube to arbon steel tube Inside: Hard chrome plated Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer ast iron arbon steel ast iron Lead-bronze casted rass arbon steel Steel wire Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated Retaining plate bolt hromium molybdenum steel lack zinc chromated Spring washer ushion ring A ushion ring ushion valve Spacer A Spacer Air releasing Air releasing A heck ball Tie-rod reinforcement ring Wear ring Steel wire hromium molybdenum steel hrome bearing steel Resin lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Zinc chromated Zinc chromated Zinc chromated lack painted In the case of long strokes Aluminum tubing material of non-lube and air-hydro type is an aluminum alloy casted. Seal List No. 3 Wiper ring 4 ushion seal 5 Rod seal 6 Piston seal 7 Valve seal Tube gasket 9 Piston gasket Retaining plate gasket 3 Guide gasket 5 6 Material NR NR Material NR Note Seals are the same as for the lube-type. Rod seal Piston seal Seals are the same as for the lube-type. (Except cushion seal) No. 5 Rod seal 6 Piston seal Note Replacement Parts (Seal kit) For replacement parts no. (seal kit) for air cylinder standard type Series S, refer to page 46. Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts. D- -X -X

7 Series S Standard/Replacement Parts/Seal Kit When ordering the replacement parts (seal kits) for standard style Series S air cylinders, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: Wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). Standard () Kit no. S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS omponent @, # Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Standard () Kit no. SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS omponent @, # Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Kit no. SHA-PS SHA-PS SHA-PS omponent @, # 46

8 With auto switch L F G D T Mounting style asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style enter trunnion style With auto switch (uilt-in magnet) How to Order DS L Nil N H, mm mm mm mm mm uilt-in Magnet ylinder Model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. Example) DS- Air ylinder Series DS,,,, mm mm mm Port thread type Nil TN TF Rc NPT G ylinder stroke (Refer to Maximum Stroke on page.) M9W Nil 3 S n Auto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot ushion J K N R H Nil Number of auto switches pcs. 3 pcs. pc. n pcs. Made to Order (Refer to page for details.) Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushon in rod side With cushon in head side With cushion in both sides ( type has no cushion.) If specifying more than one symbol, indicate them alphabetically. type has no cushion. No symbol indicates no cushion. J JP J M G M M A S S Applicable Auto Switch/Refer to pages to 37 for further information on auto switches. Special function Electrical entry Reed switch Solid state switch Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Grommet Terminal conduit Grommet Grommet Indicator light Yes Yes Yes No Yes No Wiring (Output) 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) -wire 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire 4-wire (NPN) 3-wire (NPN equivalent) 4V 4V Load voltage Auto switch model Lead wire length (m) D 5V,V V 5V,V V 5V,V V 5V,V V 5V,V 5V V 5V,V A V, V V V or less V, V V or less Tie-rod mounting M9N M9P M9 J5 M9NW M9PW M9W M9NA M9PA M9A FF A96 A93 A A54 A64 AW and mounting G K A33 A34 A44.5 (Nil) (M) 3 (L) 5 (Z) Pre-wired connector Applicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit -wire 4V Terminal V PL conduit V, V Relay, DIN terminal PL Diagnostic indication (-color indication) Grommet Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m Nil (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches than listed above, refer to page 4 for details. For details about auto switches with pre-wired connector, refer to pages 3 and. D-A9/M9/M9W/M9AL auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) Relay, PL Relay, PL 4 D- -X -X

9 Series DS Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion Ambient and fluid temperature Stroke length tolerance Mounting, Air,,,.57 MPa. MPa.97 MPa.7 MPa.5 MPa to mm/s Interchangeable Turbine oil,,.57 MPa.97 MPa.6 MPa.5 to mm/s None or less st : +., 5 to, st : +.4,, to, st : +. asic style, Foot style, Rod side flange style, Head side flange style, Single clevis style, Double clevis style, enter trunnion style JIS Symbol Double acting Made to Order Specifications (For details, refer to pages 373 to 4.) Maximum Stroke, Note Maximum stroke asic style, Head side flange style, Single clevis style, Double clevis style, enter trunnion style or less or less or less 9 or less : ylinders of the stroke range of 9 to are special products. Foot style, Rod side flange style or less or less or less 9 or less : ylinders of the stroke range of 9 to are special products. Symbol Specifications XA hange of rod end shape X5 Oversized rod cylinder X3 Special port location X4 With heavy duty scraper X6 Piston rod and rod end nut made of stainless steel X Adjustable stroke cylinder/adjustable extension type X9 Adjustable stroke cylinder/adjustable retraction type X Dual stroke cylinder/double rod type X Dual stroke cylinder/single rod type X4 hange of trunnio bracket mounting position X5 hange of tie-rod length X Fluororubber seal X6 levis pins with flat washer X7 Double clevis pin and double knuckle pin made of stainless steel X Rod side trunnion X With coil scraper X6 Hard chrome plated stainless steel rod X6 With rod end bracket Refer to pages 4 to 4 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no.

10 Air ylinder Series DS Principal Parts Material and Surface Treatment over Tube Sliding part seal Mass,,, type type type Piston rod Piston arbon steel Aluminum alloy casted Hard chrome plated hromated Foot style, Rod side flange style: In the case of bore size of and, the stoke range is to. In the case of, piston seals of the stroke range to are NLP. In the case of bore size and, piston seals are NLP. asic style Foot style Rod side flange style asic Head side flange style mass Single clevis style Double clevis (levis pin, otter pin) Trunnion style Additional mass per each stroke Accessory bracket Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut Material plate Aluminum alloy NR NR NR Note lack painted Hard anodized JIS O-ring (kg) J JP J M G M M A S S Mounting racket Part No. Foot style Flange style Single clevis style Double clevis style S-L S-F S- S-D S-L4 S-F4 S-4 S-D4 S-L6 S-F6 S-6 S-D6 S-L S-F S- S-D S-L S-F S- S-D Order two foot brackets per cylinder. When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. D- 49 -X -X

11 Series DS onstruction () Foot style: Rod side flange style In the case of, to st In the case of to st () In the case of, (), (): type is used. :,, only omponent Parts No Rod cover Head cover ylinder tube Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion ring ushion valve Spacer A Spacer Air releasing Air releasing A heck ball Auto switch Set screw Switch mounting bracket Switch mounting screw Magnet Wear ring Material plate plate Aluminum alloy Aluminum alloy casted arbon steel ast iron Lead-bronze casted rass arbon steel Steel wire hromium molybdenum steel Steel wire hromium molybdenum steel hrome bearing steel hromium molybdenum steel Aluminum alloy opper wire Resin Note lack painted lack painted Hard anodized hromated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Zinc chromated Zinc chromated Zinc chromated Zinc chromated Nickel plated Seal List No. Rod seal Piston seal Material NR NR Material NR Note () (For lube-type, refer to page 4.) Wiper ring ushion seal Rod seal Piston seal Valve seal Tube gasket Piston gasket Retaining plate gasket Guide gasket Seals except # and # are the same as lube type. 3 Rod seal Piston seal Seals except # and # are the same as lube type. No. 3 Replacement Parts (Seal kit) Note For replacement part no. (seal kits) of cylinder with auto switch Series DS, refer to page 4. Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts.

12 Air ylinder Series S With Auto Switch/Replacement Parts/Seal Kit When ordering the replacement parts (seal kits) for Series DS cylinder with auto switches, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). () Kit no. S-A-PS S-A-PS S-A-PS DS-A-PS DS-A-PS Kit no. SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS Kit no. DSLA-PS DSLA-PS DSLA-PS omponent part #, #, #, #3, #5 Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) omponent part #, #, #, #3, #5 Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) () omponent part #, #, #, #3, #5 Foot style, Rod side flange style:, to stroke, to stroke Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) J JP J M G M M A S S Kit no. SHA-PS SHA-PS SHA-PS omponent part #, #, #, #3, #5 D- 4 -X -X

13 Series S asic Style: S type (S), type (SN), type (SH) x P ZZ + l + Stroke ZZ + Stroke With auto switch: DS ~= ~ = d ~ = d x P ZZ + l + Stroke ZZ + Stroke Stroke range A to to to to to to 7 to Without rod boot H 5 ZZ d 9 96 AL e The minimum stroke with rod boot is mm or more D 7 E f h l stroke. stroke. stroke. stroke. stroke. stroke. stroke EA ZZ F FA G J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K KA Stroke range Up to Up to Up to Up to Up to 9 M S 6 MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x With Auto Switch: to Only N Without rod boot ZZ.5 5 P S ZZ Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page

14 Air y linder Series S Foot Style: SL type (SL), type (SLN), type (SLH) x P d 4 x LD J JP ZZ + l + Stroke L ZZ + Stroke J Long stroke x P M G M M d 4 x LD A ZZ + l + Stroke L ZZ + Stroke S S With auto switch: DSL x P ~= d 4 x LD ~ = ~ = ZZ + l + Stroke L ZZ + Stroke Stroke range * Long stroke range Up to to Up to to Up to to Up to to Up to to Up to to Up to to A 7 AL Without rod boot RY S X Y H ZZ d e The minimum stroke with rod boot is mm or more. D 7 E EA F FA f h l ZZ 33. stroke stroke 6 4. stroke stroke stroke stroke stroke 466 G J K KA LD LH LS LT LX LY MM N P M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x With Auto Switch: to Only Stroke range Without rod boot S LS ZZ ZZ Up to Up to 3 6 Up to Up to 3 Up to Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. RT D- -X -X

15 Series S Rod Side Flange Style: SF type (SF), type (SFN), type (SFH) x P 4 x FD d 4 x FD d 4 x FD d ZZ + l + Stroke ZZ + Stroke Long stroke x P ZZ + l + Stroke ZZ + Stroke With auto switch: DSF x P ~= ~ = ~ = ZZ + l + Stroke ZZ + Stroke Stroke Without rod boot range A AL D E EA F FA FD FT FX FY FZ G J K KA M S N P MM H ZZ d e f h l ZZ Up to M4 x M x Up to M4 x.5 5 M x x Up to M6 x M x Stroke 73 Up to M x M x Up to M x M x Up to 7 Up to M4 x.5 5 M x M x M64 x x Stroke 34 Long Stroke With Auto Switch: to Only Long stroke Without rod boot Without rod boot M M RT RY Stroke range S range ZZ ZZ ZZ ZZ to Up to 3 6 to Up to 3 55 to to to Up to Up to Up to to Dimensions except mentioned above are the same as standard type. to For the auto switch mounting position and its mounting height, The minimum stroke with rod boot is mm or more. refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page

16 Air ylinder Series S Head Side Flange Style: SG type (SG), type (SGN), type (SGH) x P 4 x FD d J JP ZZ + l + Stroke ZZ + Stroke J M G x P ~= 4 x FD M M ~ = A d ~ = S ZZ + l + Stroke ZZ + Stroke S Stroke range * Up to Up to Up to Up to Up to Up to Up to A 7 AL D 7 E EA F FA FD FT FX 65 5 FY 3 FZ G J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K KA MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N P Without rod boot S H ZZ d e f h l stroke stroke stroke. stroke. stroke. stroke. stroke The minimum stroke with rod boot is mm or more. ZZ With Auto Switch: to Only Stroke range S Up to Up to Up to 6 Up to Up to 9 Without rod boot ZZ ZZ Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. D- -X -X

17 Series S Single levis Style: S type (S), type (SN), type (SH) x P d Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke With auto switch: DS x P ~= ~ = d ~ = Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke Stroke range Up to Up to Up to Up to Up to Up to Up to A 7 AL S U Without rod boot H Z ZZ d e The minimum stroke with rod boot is mm or more. DH T X D 7 E f h l Z ZZ 33. stroke stroke stroke stroke stroke stroke 55. stroke EA F FA G J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K KA L MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N With Auto Switch: to Only P RR Stroke range Without rod boot S Z ZZ Z ZZ Up to Up to Up to Up to Up to Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page

18 Air ylinder Series S Double levis Style: SD type (SD), type (SDN), type (SDH) x P D hole H Shaft d9 J d JP J Z + l + Stroke ZZ + l + Stroke With auto switch: DSD Z + Stroke ZZ + Stroke M G M x P D hole H Shaft d9 ~= M A ~ = S d ~ = S Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke Note) levis pin and cotter pin are shipped together. Stroke range Up to Up to Up to Up to Up to Up to Up to A 7 AL DH T X Z D E EA F FA G J K KA M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x L MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x With Auto Switch: to Only Without rod boot Without rod boot S U Stroke range S H Z ZZ d e f h l Z ZZ Z ZZ Z ZZ stroke 96 Up to stroke 6 33 Up to stroke. stroke. stroke Up to Up to Up to stroke Dimensions except mentioned above are the same as stroke standard type. For the auto switch mounting position and its mounting The minimum stroke with rod boot is mm or more. height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. N P RR D- -X -X

19 Series S enter Trunnion Style: ST type (ST), type (STN), type (STH) Z + l + / stroke Z + / stroke x P d h + l ZZ + l + Stroke ZZ + Stroke With auto switch: DST Z + l + / stroke Z + / stroke x P ~= ~ = d ~ = h + l ZZ + l + Stroke ZZ + Stroke Stroke range A AL D E EA F FA G J K KA M MM N P R S TDe TT TX 5 to 4 6 M4 x M x to M4 x M x to M6 x.5 M x to M x M x to M x M x to M4 x.5 5 M x to M x.5 65 M64 x With Auto Switch: to Only Without rod boot Without rod boot TY TZ Stroke range S H Z ZZ d e f h l Z ZZ Z ZZ Z ZZ stroke UP to stroke UP to stroke UP to stroke.5 UP to stroke.5 UP to stroke Dimensions except mentioned above are the same as stroke 37 standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. The minimum stroke with rod boot is mm or more. (The minimum stroke with rod boot, but for bore size and is mm or more.)

20 Air ylinder Series S Accessory racket Dimensions I Single Knuckle Joint Knuckle Pin, levis Pin ND hole H Shaft d9 Part no. I- I-4 I-6 I- I- I-5 I- Applicable bore size A 9 9 A E L Y Double Knuckle Joint MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x NDH Material: ast iron NX RR U Material: ast iron Applicable Part no. bore size A E L MM NDH NX NZ RR U Y- 46 M x Y-4 5 M x Y-6 55 M x Y- 7 M x Y- 7 M x Y M x Y M64 x Use a single knuckle joint or a double knuckle joint individually. (Screw it entirely over the rod end threads and tighten it.) Extend the dimensions of A, H. when using a single/double knuckle joint together with a rod end nut. (To extend dimensions A/H, refer to the table below, and specify the product as Made-to-order -XAO.) Pin and cotter pin are attached for double knuckle joint. The rod end bracket type is available as Made to Order -X6 when ordering the cylinder and attached mounting brackets. Refer to page 4-. l x d Material: arbon steel Applicable bore d Applicable Part no. size Dd9 L l m (Drill through) cotter pin.65 IY x.65 IY x. IY x. IY-, x 55. IY x 65. IY x IY- includes a pin and cotter pins. Rod End Nut Part no. NT- NT-6 NT- NT- NT-5 NT-, d M x.5 M x.5 M x.5 M x.5 M x M64 x Material: H D J JP J M G M M A S S 49 D- -X -X

21 With auto switch uilt in magnet ( to ) (uilt-in magnet) Symbol Nil F,,, Tubing material Aluminum tube Steel tube Steel tube SW DSW Double rod type Mounting style Stroke range Without switch or less or less or less or less Note) or less or less or less L L asic style Foot style Rod side flange style enter trunnion style Tubing material With switch or less or less or less 9 or less or less or less Refer to page for the maximum strokes. Note) For items corresponding to the lass Pressure Vessel Act, the material is aluminum alloy. L F T uilt-in magnet cylinder model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DSW- Lead wire length symbols:.5 m Nil (Example) M9NW m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ How to Order Nil N H Port thread type Nil TN TF Rc NPT G, mm mm mm mm mm mm mm mm mm mm It is not available with auto switch. ylinder stroke (Refer to Maximum Stroke on page.) Applicable Auto Switch/Refer to pages to 37 for further information on auto switches. Reed switch Solid state switch Special function Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Diagnostic indication (-color indication) Electrical entry 3-wire (NPN) Grommet 3-wire (PNP) 4 V -wire Terminal 3-wire (NPN) conduit -wire Yes 3-wire (NPN) 3-wire (PNP) -wire 4 V Grommet 3-wire (NPN) 3-wire (PNP) -wire 4-wire (NPN) 3-wire(NPN equivalent) Yes Grommet Terminal conduit DIN terminal Grommet Indicator light No Yes No Yes Wiring (Output) -wire 4 V Load voltage M9N M9P M9 J5 M9NW M9PW M9W M9NA M9PA M9A FF A96 A93 A A54 A64 AW and mounting G K A33 A34 A44 M9W Number of auto swithes Nil pcs. 3 3 pcs. S pc. n n pcs. Auto switch Nil Without auto switch Suffix for cylinder Rod boot in one side Rod boot in both sides ushion J K JJ KK N R H Nil Nylon tarpaulin Heat resistant tarpaulin Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushion in rod side With cushion in head side With cushion in both sides ( type has no cushion.) If specifying more than one symbol, indicate them in alphabetically. type has no cushion. No symbol indicates no cushion. Solid state auto switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed above, refer to page 4 for details. For details about auto switches with pre-wired connector, refer to pages 3 and. D-A9/M9/M9W/M9AL auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) D 5 V, V V 5 V, V V 5 V, V V 5 V, V A V, V 5 V, V 5 V V V 5 V, V V or less V, V V or less V V, V Auto switch model Tie-rod mounting Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. 4 Air ylinder: Double Rod Series SW, :,,,,,, :,, For the aluminum tubing of bore sizes, and, a new Series S model is now available with reduced weight and self weight V deflection. Please consider using the S series. Refer to the table below for the applicable auto switch model. Lead wire length (m) (Nil) (M) (L) (Z) Pre-wired connector Made to Order (Refer to page for details.) Applicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit Relay, PL Relay, PL PL Relay, PL

22 Air ylinder: Double Rod Series SW JIS Symbol Made to Order Specifications (For details, refer to pages 373 to 4.) Symbol Specifications XA hange of rod end shape X6 Heat-resistant cylinder ( to ) X4 With heavy duty scraper X5 Heat resistant cylinder ( ) X6 Piston rod and rod end nut made of stainless steel X4 hange of trunnion bracket mounting position X5 hange of tie-rod length X Rod side trunnion X With coil scraper Refer to pages 4 to 4 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no. Specifications, Fluid Air Turbine oil Proof pressure.57 MPa Note) Max. operating pressure Min. operating pressure Piston speed ushion Ambient and fluid temperature.97 MPa.5 MPa to mm/s Interchangeable Without switch to 7 (No freezing) With switch to (No freezing).97 MPa.6 MPa.5 to mm/s None 5 to Stroke length tolerance st or less: +. 5 to, st : +.4, to, st : +. Mounting asic style, Foot style, Rod side flange style, enter trunnion style Note) Item corresponding to lass Pressure Vessel Act is.46 MPa. Maximum Stroke Tubing material Mounting bracket,, Accessory Option Aluminum tube Steel tube Without switch With switch Without switch asic style, Foot style, Rod side flange style, enter trunnion style or less or less or less or less or less 9 or less Note ) Mounting asic style Foot style Rod end nut Single knuckle joint Double knuckle joint (levis pin, otter pin) Rod boot or less or less or less or less Note ) or less Note ) For models with a bore size of with auto switches, strokes of 999 to are available as special orders. Note ) For items corresponding to the lass Pressure Vessel Act, the material is aluminum tubing. Rod side flange style enter trunnion style Mounting racket Part No. Foot style SW-L SW-L4 SW-L6 SW-L SW-L SW-L5 SW-L Flange style S-F S-F S-F6 S-F S-F S-F5 S-F Order two foot brackets per cylinder. J JP J M G M M A S S lass Pressure Vessel In the case of exceeding the following strokes, the cylinder is subject to lass Pressure Vessel Act. ylinder stroke Rod oot Material Symbol Material Maximum ambient temperature J Nylon tarpaulin 7 K Heat resistant tarpaulin Maximum ambient temperature for the rod boot itself. D- -X -X

23 Series SW Principal Parts Material and Surface Treatment Tube Sliding seal Piston over,,,,, Piston rod Material plate Aluminum alloy arbon steel tube arbon steel tube Note) NR NR NR arbon steel ast iron (With auto switch: Aluminum alloy casted) Aluminum alloy casted (Iron tube: ast iron) Aluminum alloy casted (Iron tube: ast iron) Note lack painted Hard anodized Hard chrome plated Hard chrome plated Note) JIS O-ring Hard chrome plated hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) In the case of an auto switch with bore sizes and, tubing material is aluminum alloy (hard anodized). Piston seal is NLP. Note) For items corresponding to the lass Pressure Vessel Act, the material is Aluminum alloy and the note should state Hard anodized. Mass/Aluminum Tube: (, ) asic style 6.5 (5.) 9.6 (.) 6.65 (4.79) (kg) asic mass Foot style Rod side flange style.4 (6.9) 9.9 (.96).4 (.64) 4.6 (3.) 9. (7.) 33.4 (3.) Trunnion style.64 (9.4) 5. (3.5) 34.5 (3.9) Add l mass per each mm stroke Single knuckle.9.6. Accessory bracket Double knuckle (Knuckle pin, otter pin).37.. Rod end nut ( ): Denotes the non-lube and air-hydro type. alculation: (Example) SWL- asic mass.4 (Foot style, ) Additional mass.57/ stroke ylinder stroke stroke x / =.99 kg Mass/Steel Tube asic mass asic style Foot style Trunnion style Add l mass per each mm stroke Accessory bracket Rod side flange style Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut (kg)

24 Air ylinder: Double Rod Series SW onstruction, With auto switch type With auto switch J JP J Aluminum tube Steel tube to, M G M M A S S omponent Parts No. Rod cover ylinder tube Material to Aluminum alloy to arbon steel tube Note lack painted Hard anodized Inside: Hard chrome plated Piston Piston rod A Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion valve Spacer A Air releasing Air releasing A heck ball Magnet ast iron arbon steel arbon steel ast iron Lead-bronze casted rass arbon steel Steel wire hromium molybdenum steel Steel wire hromium molybdenum steel hrome bearing steel Hard chrome plated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Electroless nickel plated Zinc chromated In the case of the aluminum tube of non-lube and airhydro type, piston material is an aluminum alloy casted. In the case of auto switch bore size and, piston material is aluminum alloy casted and tubing material is aluminum alloy (hard anodized). Aluminum tube Seal List Auto switch No. Material Note Wiper ring ushion seal Rod seal 3 Piston seal 4 Valve seal 5 Tube gasket NR 6 Piston gasket 7 Retaining plate gasket Guide gasket Seals are the same as lube type. Rod seal 3 Piston seal NR Seals are the same as lube type. No. Material Note Rod seal 3 Piston seal NR (With switch) Seals except # are the same as lube type. No. Material Note 3 Piston seal NR Replacement Parts (Seal kit) For replacement parts no. (seal kits) of double rod style cylinder for Series SW, refer to page 4. Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts. 3 D- -X -X

25 Series SW Double Acting, Double Rod/Replacement Parts /Seal kit When ordering the replacement parts (seal kits) for Series SW double rod type cylinder, indicate the order number listed in the table at right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). Kit no. SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS omponent Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) with Auto Switch Kit no. SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS omponent It is not available with auto switch. Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) with Auto Switch Kit no. SWA-PS SWA-PS SWA-PS DSWA-PS DSWA-PS omponent @7, # Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Kit no. SWHA-PS SWHA-PS SWHA-PS omponent 4

26 Air ylinder: Double Rod Series SW asic Style: SW type (SW), type (SWN), type (SWH) x P J JP (One side) ZZ + stroke H + Stroke J M G e M d M l f h + l ZZ + l + stroke ( on one side) A S (oth sides) MM FA G x P G FA MM S d d E e D D e E AL A K l h + l f N ZZ + l + stroke N M f l + Stroke K h + l + Stroke AL A Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to Without rod boot H 5 ZZ d 9 96 A 7 AL D 7 E (Single side) (oth sides) e f h l ZZ ZZ stroke stroke stroke stroke stroke stroke stroke 5 EA F FA G J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K KA M MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x With Auto Switch: to Only N S Without Stroke range rod boot (Single side) (oth sides) S Without rod boot ZZ ZZ ZZ Up to to Up to to Up to to 6 Up to to Up to 9 to Refer to Minimum Stroke for Auto Switch Mounting on page 444. P D- -X -X 4

27 Series SW Foot Style: SWL type (SWL), type (SWLN), type (SWLH) x RcP ZZ + stroke H + Stroke 4 x LD L h + l l f d e ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to A 7 AL D 7 E EA F FA G J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K KA LD LH LS LT LX 3 LY MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N P S X Y 5 Without rod boot H ZZ d 9 96 (Single side) e f h l. stroke. stroke. stroke. stroke. stroke. stroke. stroke ZZ (oth sides) ZZ With Auto Switch: to Only Stroke range Without rod boot S LS Up to Up to Up to Up to Up to 9 to to to to to Refer to Minimum Stroke for Auto Switch Mounting on page 444. Without rod boot ZZ (Single side) ZZ (oth sides) ZZ

28 Air ylinder: Double Rod Series SW Rod Side Flange Style: SWF type (SWF), type (SWFN), type (SWFH) 4 x FD x RcP J JP d e l f h + l ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) H + Stroke ZZ + stroke J M G M M A S S Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to A 7 AL D 7 E EA F FA FD FT FX 65 5 FY 3 FZ G J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K KA M MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N P S Without rod boot H ZZ (Single side) d 9 96 e f h l. stroke. stroke. stroke. stroke. stroke. stroke. stroke ZZ (oth sides) ZZ With Auto Switch: to Only Stroke range Without rod boot S Without rod boot ZZ Up to Up to Up to Up to Up to 9 to to to to to Refer to Minimum Stroke for Auto Switch Mounting on page 444. (Single side) ZZ (oth sides) ZZ D- -X -X 7

29 Series SW enter Trunnion Style: SWT type (SWT), type (SWTN), type (SWTH) Z + / stroke x RcP Z + / stroke ZZ + stroke H + Stroke Z + l + / stroke d e l f h + l ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) Stroke range Without rod boot A AL D E EA F FA G J K KA M MM N P 5 to to 4 6 M4 x M x.5 to to M4 x M x.5 to to to to to to to to to to M6 x.5 M x.5 M x.5 M4 x.5 M x M x.5 M x.5 M x.5 M x M64 x Without rod boot (Single side) (oth sides) TDe TT TX TY TZ H Z ZZ d e f h l Z ZZ Z ZZ stroke stroke stroke stroke stroke stroke stroke 5 R S With Auto Switch: to Only Stroke range Without rod boot (Single side) (oth sides) S Without rod boot Z ZZ Z ZZ ZZ 5 to to to to to to to 9 to to to Refer to Minimum Stroke for Auto Switch Mounting on page 444.

30 With auto switch L F G D T Mounting style asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style enter trunnion style uilt-in magnet cylinder model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DSLQ- S DS L Q L Low friction type Q linder tube bore size mm mm mm Port thread type Nil TN TF How to Order Rc NPT G ylinder stroke Refer to Standard Stroke on page 4. 4V 4V 4V M9W Number of auto switches Nil pcs. S pc. 3 3 pcs. n n pcs. Auto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot ushion Applicable Auto Switch/Refer to pages to 37 for further information on auto switches. Reed switch Solid state switch With auto switch (uilt-in magnet) Special function Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Electrical entry Grommet Grommet DIN terminal Diagnostic indication (-color indication) Grommet Air ylinder: Low Friction Series SQ,, Terminal conduit Grommet Terminal conduit Indicator light Yes Yes Yes No Yes No Wiring (Output) 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) -wire 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire 4-wire (NPN) 3-wire(NPN equivalent) -wire J K A R H Nil Made to Order (Refer to page 4 for details.) Nylon tarpaulin Heat resistant tarpaulin With cushion in both sides With cushion in rod side With cushion in head side Without cushion If specifying more than one symbol, indicate them alphabetically. Load voltage Auto switch model Lead wire length (m) D A and mounting (Nil) (M) (L) (Z) 5V,V V 5V,V V 5V,V V 5V,V V 5V,V 5V V 5V,V V V, V V V or less V, V V or less V, V Tie-rod mounting M9N M9P M9 J5 M9NW M9PW M9W M9NA M9PA M9A FF A96 A93 A A54 A64 AW For the aluminum tubing of bore sizes, and, a new Smooth ylinder Series SY to realize dual-side low friction and low-speed operation. (Refer to est Pneumatics No. 3.) G K A33 A34 A44 Pre-wired connector Applicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m Nil (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches than listed above, refer to page 4 for details. For details about auto switches with pre-wired connector, refer to pages 3 and. D-A9/M9/M9W/M9AL auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) Relay, PL Relay, PL PL Relay, PL 9 J JP J M G M M A S S D- -X -X

31 Series SQ Designed with a low sliding resistance of the piston, this air cylinder is ideal for applications such as contact pressure control, which requires smooth movements at low pressures. Application Example Low friction cylinder is used in combination with precision regulator (Series IR). Driving roller Widing roller Precision regulator Precision regulator (Moving object) Low sliding resistance Min. operating pressure.5 MPa Auto switch mounting is possible. Specifications Action Direction of low friction Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Allowable leakage ushion Lubrication Mounting Double acting, Single rod oth directions Air.5 MPa.7 MPa.5 MPa.5l/min (ANR) or less None (With cushion is available.) Not required (),, asic style, Foot style, Rod side flange style, Head side flange style, Single clevis style, Double clevis style, enter trunnion style In the case of w/ cushion, pressure inside cushion stroke is not included. JIS Symbol Double acting Maximum Stroke Tubing material Mounting bracket Aluminum tube (with auto switch) asic style, Head side flange style Single clevis style, Double clevis style enter trunnion style Rod side flange style or less or less or less Iron tube (without auto switch) asic style, Head side flange style Single clevis style Double clevis style enter trunnion style or less or less or less Foot style Rod side flange style or less or less or less Made to Order Specifications (For details, refer to pages 373 to 4.) Symbol Specifications XA hange of rod end shape X3 Special port location X4 hange of trunnion bracket mounting position X5 hange of tie-rod length X6 levis pins with flat washer Refer to pages 4 to 4 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no. X7 Double clevis pins made of stainless steel (Stainless steel 4) X Rod side trunnion 4

32 Air ylinder: Low Friction Series SQ Mounting racket Part No. Foot style S-L Flange style S-F Single clevis style S- Double clevis style S-D Order two foot brackets per cylinder. Accessory asic Mounting style style Standard equipment levis pin Rod end nut Single knuckle joint Option Double knuckle joint (Knuckle pin, otter pin) Rod boot Foot style S-L4 S-F4 S-4 S-D4 Rod side flange style Principal Parts Material and Surface Treatment over Tube Sliding part seal Piston rod Piston Material plate Aluminum alloy (with auto switch) arbon steel tube (without auto switch) NR arbon steel Aluminum alloy casted Head side Single flange style clevis style Mass/Steel Tube (For aluminum tube [with auto switch], refer to page 49.) asic mass asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style Trunnion style Additional mass per each mm of stroke Accessory bracket Single knuckle Double knuckle (With pin) alculation: (Example) SLQ, asic mass.4 (Foot style, ) Additional mass 3.5/ stroke ylinder stroke stroke, x / =.94 kg Sliding Resistance S-L6 S-F6 S-6 S-D6 Double clevis style enter trunnion style Note lack painted Hard anodized Inside: Hard chrome plated Hard chrome plated hromated (kg) Rod oot Material Symbol J K Material Nylon tarpaulin Heat resistant tarpaulin Maximum ambient temperature for the rod boot itself. J JP J M G M M A S S Sliding resistance (MPa) (onverted into cylinder operating pressure) Pressure (MPa) 44 D- -X -X

33 Series SQ onstruction omponent Parts No. Material Note No. Material Note Rod cover Head cover ylinder tube Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion ring ushion valve Wear ring With auto switch plate plate Aluminum alloy arbon steel tube Aluminum alloy casted arbon steel ast iron abbitt rass arbon steel Steel wire hromium molybdenum steel Steel wire Resin lack painted lack painted Hard anodized Hard chrome plated hromated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Seal List Wiper ring 9 ushion seal Rod seal Piston seal NR Valve seal 3 Tube gasket 4 Piston gasket 5 Retaining plate gasket 6 Guide gasket It is used only in the case of w/ cushion type. Low Friction Kit no. SQA-PS SQA-PS SQA-PS omponent @, # Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-L-5 (5 g), GR-L- ( g), GR-L- ( g) Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts. asic Style: SQ Dimensions: According to Mounting rackets External dimensions for each mounting bracket other than basic style are the same as standard type. Refer to pages 4 to. x P EA ZZ + Stroke Stroke range A AL D E EA F G J K KA M MM N P S H ZZ Up to Up to Up to M4 x.5 M4 x.5 M6 x M x.5 M x.5 M x.5 / / 3 /

34 Air ylinder Series S Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height and mounting type D-A3 D-G3/K3 D-A44 ~ Hs = Auto switch Auto switch Applicable cable O.D. 6. to.5 Applicable cable O.D. 6. to 9.6 ~ Hs = Tie-rod mounting type D-A9A9V D-M9/M9V D-M9W/M9WV D-M9AL/M9AVL D-A5/A6 A D-F5/J5/D-F5NTL D-F5AL/FF D-F5W/JW D-Z7/Z D-Y/Y69/Y7P/Y7PV D-Y7W/Y7WV D-Y7AL Auto switch Auto switch ~ Ht ~ = =Ht ~ =Ht ~ =Ht ~ = Ht ~ Hs = ~ Hs = ~ Hs = J JP J M G M M A S S Proper Auto Switch Mounting Position Auto switch model D-A9 D-A9V A D-M9 D-M9V D-M9W D-M9WV D-M9AL D-M9AVL A Auto Switch Mounting Height D-Z7/Z D-Y5/Y6 D-Y7P/Y7PV D-Y7W D-Y7WV D-Y7AL A Auto switch D-Z7/Z model D-A9 D-Y5/Y6 D-A9V D-M9V D-Y7P D-M9 D-M9WV D-Y7PV D-M9W D-M9AVL D-Y7W D-M9AL D-Y7WV D-Y7AL Hs Ht Hs Ht Hs Ht * Low friction type (DSQ):,, D-A5 D-A6 D-A3 D-A44 D-G D-K A D-A3 D-G D-K Hs D-AW A 7.5 D-A44 Ht D-F5W D-JW D-F5AL D-F5 D-J5 D-FF A * The mounting position should be referred for reference only for the auto switch mounting position at the stroke end detection. Adjust the auto switch after confirming the operation to set actually. * Low friction type (DSQ):,, D-A5 D-A6 D-AW Hs Ht D-F5NTL A D-F5 D-J5 D-F5W D-JW D-F5AL D-FF D-F5NTL Hs Ht D- -X -X

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.

Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W. Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 M G M M A S S Series

More information

Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube

Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube Air ylinder S Series,,,,,, J Series Variations Series Action asic Standard variations Page JP J JM Standard S Series S Series Double acting Single rod S series Double rod SW series 5 548 M M3 G G3 JM M

More information

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover. Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.

More information

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT. ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.

More information

15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to

15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to Air ylinder A Series ø40, ø50, ø63, ø80, ø100 RoHS Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to (ø50-50 stroke) 15% lighter 1.31kg Easy air cushion control

More information

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing

More information

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125 ir Cylinder M Series ø3, ø40, ø50, ø63, ø80, ø00, ø5 RoHS 0% lighter CJ (ø40-00 stroke) Weight M Series 0.9 kg CJP CJ JCM CM Current model CM3 CG.0 kg CG3 JM Reduced weight by changing the shape of the

More information

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A ø, ø, ø L F D Without auto switch With auto switch style asic style Axial foot style Rod side flange style Double clevis style (Except ø) ore size mm mm mm How to Order Standard stroke (mm) ø,,, ø,,,,

More information

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type. ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 10 % lighter RoS (ø 40-100 stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type. 0.91 kg Reduced weight by changing the shape

More information

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm) ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore

More information

Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm

Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot

More information

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size Air Cylinder: tandard eries CG1W,,,,,,, 0 How to Order auto switch auto switch CG1W L N 0 With auto switch CDG1W L N 0 HW N A uilt-in magnet Double acting, double rod type L U Mounting style asic style

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting. Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common

More information

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional

More information

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy

More information

Air Cylinder Series CG1

Air Cylinder Series CG1 ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison

More information

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism)

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism) Non-rotating Double Power Cylinder Series Double Power Cylinder Series R (without non-rotating mechanism) 2 Non-rotating Double Power Cylinder Double extension output power!! Our unique construction doubles

More information

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm) Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder

More information

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity

More information

Air Cylinder Series CG1

Air Cylinder Series CG1 ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison

More information

16% lighter Existing model

16% lighter Existing model ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter Existing model New Series.0 kg.69 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series

More information

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) MGJ -Z W MGQ MGG MGC MGF MGT 23 D- -X Non-rotating Double Power Cylinder Double extension output

More information

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) 23 MGJ -Z W MGQ MGG MGC MGF MGT D- -X Tube rod diameter External dimension Non-rotating Double

More information

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover.

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter New Series Existing model.69 kg.0 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

Compact Cylinder/Plate type

Compact Cylinder/Plate type Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder Series CJ2 ø, ø, ø CJ1 CJP Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. Series

More information

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper

More information

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

More information

Series MBB ø32, ø40, ø50, ø63, ø80, ø100

Series MBB ø32, ø40, ø50, ø63, ø80, ø100 Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis

More information

Guide Table. ø40, ø63, ø100

Guide Table. ø40, ø63, ø100 Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125 M..3 : PM Page i CT.ES-8 F ir Cylinder ø newly introduced Series M ø,ø,ø,ø,ø,ø,ø Series M, MW, MK, Double acting single rod Double acting double rod Double acting non-rotating rod ø newly introduced (Double

More information

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)

More information

Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.

Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table. Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc

More information

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added. ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side

More information

Series C95 ø32, ø40, ø50, ø63, ø80, ø100

Series C95 ø32, ø40, ø50, ø63, ø80, ø100 ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless

More information

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ D- -X

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ D- -X ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical () 46-4 www.cmafh.com High Power ylinder ø, ø, ø3, ø4, ø, ø, ø, ø 33 RE RE RE Y X RH ourtesy of M/Flodyne/Hydradyne

More information

Guide Table. MGF Series

Guide Table. MGF Series Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Compact Hydraulic Cylinder

Compact Hydraulic Cylinder ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch

More information

Guide Table. Series MGF

Guide Table. Series MGF Guide Table Series MGF ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPG AND DELIVER TENS OF THOUSANDS OF -STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED

More information

Elliptical design for space-savings

Elliptical design for space-savings Plate Cylinder Series,,,, By adopting an elliptical piston design, a slim, square shaped body has been achieved, resulting in a space-saving cylinder with unrestricted mounting directions. Elliptical design

More information

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8 Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole

More information

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected.

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected. ir Cylinder Series ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS emale rod end available as standard Rod end types suitable for the application can be selected. emale thread Easy fine adjustment of auto

More information

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø 20, ø 25, ø 32, ø 40, ø 50, ø 63, ø 80, ø 100 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread

More information

1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1

1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1 1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high

More information

15% Weight reduced. Cycle time shortened. Lightweight. CP96 Series. ISO Cylinder ISO Standard (15552)

15% Weight reduced. Cycle time shortened. Lightweight. CP96 Series. ISO Cylinder ISO Standard (15552) ISO ylinder ISO Standard (15552) P96 Series ø32, ø40, ø50, ø63, ø80, ø100 RoS 85 Lightweight Up * ompared with the previous P96 series (ø40, 100 mm stroke) 15% Weight reduced By adopting a new cushion

More information

Plate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63

Plate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63 Plate Cylinder MU Series ø, ø, ø, ø, ø It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting RoHS Small auto switch CUJ CU CQS JCQ CQ2 Reduction of labor for work RQ CQM

More information

Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment

Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment Symbol -N B80-S100 Features With built-in magnet. (Standard) With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double

More information

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod. eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-

More information

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Compact Slide. Series MXH ø6, ø10, ø16, ø20 Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder eries ø, ø, ø Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. eries Variations tandard

More information

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard

More information

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø20, ø25, ø32, ø40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of auto

More information

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto

More information

How to Order. Standard stroke (mm) ø10 15, 30, 45, 60

How to Order. Standard stroke (mm) ø10 15, 30, 45, 60 ingle Acting, ingle Rod, pring Return/Extend eries K ø, ø pring extend pring return B L D Without auto switch With auto switch mm mm Basic Axial foot Rod side flange Double clevis K L CDJ2K L How to Order

More information

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

C85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40

C85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40 ISO Cylinder (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 Series: ø32, ø40 RoS Part numbers set for actuators with mounting brackets, rod end brackets and auto switches available. Now it is not necessary

More information

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55 55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA

How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) - www.cmafh.com CDG1 With auto switch (uilt-in magnet) Mounting style asic style L xial foot style F Rod side

More information

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø, ø, ø, ø, ø Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø- stroke) % lighter 1.31kg ew 1.54 kg Existing model Easy air cushion control

More information

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Rc NPT. Cylinder stroke (mm) Long stroke (mm) E Spring locking (Exhaust locking)

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Rc NPT. Cylinder stroke (mm) Long stroke (mm) E Spring locking (Exhaust locking) Fine Lock Cylinder Double Acting, Single Rod,,, How to Order With auto switch With auto switch (uilt-in magnet) Mounting style asic style L Axial foot style F Rod side flange style G Head side flange style

More information

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43 CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular

More information

Compact Cylinder with Lock

Compact Cylinder with Lock ompact ylinder with ock Series Q ø, ø, ø, ø, ø, ø, ø, ø J2 2 1 1 N N N NS S Q RQ U P 1 rop prevention when the pressure of air source is decreased or the residual pressure is released. rop prevention for

More information

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. Velocity curve RE RE Speed Time Sine cylinder Conventional cylinder 3 Sine Cylinder Series,,, llows rapid

More information

Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3)

Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3) Slide Unit Series CX/M/L Slide Bearing/CX:ø, ø, ø5 M:ø, ø6, ø0, ø5, ø3 Ball Bushing Bearing/L:ø, ø6, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V Compact Cylinder: Standard Type Double cting, Single Rod,,,,,,,,, How to Order Without auto switch D With auto switch CDQ2 D JW S uilt-in magnet Mounting style Through-hole (Standard) oth ends tapped style

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the

More information

Cylinder with Lock. MNB Series. A locking cylinder ideal for intermediate stops, emergency stops and drop prevention. ø32, ø40, ø50, ø63, ø80, ø100

Cylinder with Lock. MNB Series. A locking cylinder ideal for intermediate stops, emergency stops and drop prevention. ø32, ø40, ø50, ø63, ø80, ø100 ylinder with Lock M Series ø, ø, ø, ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. Simple construction force magnifying mechanism is employed based on the wedge

More information

Hygienic Design Cylinder

Hygienic Design Cylinder ygienic Design ylinder Series Y water resistant cylinder configured for easy cleaning Series Y ISO standard type Series Y asic type Series YQ With guide Series YG J G Y Series 0 0 External seal material

More information

Toggle Type Air Gripper

Toggle Type Air Gripper ø2, ø40, ø50, ø6 Ideal for gripping heavy workpiece Toggle mechanism is adopted. Holds workpiece even when pressure drops. The toggle mechanism that activates when the finger closes realizes strong and

More information

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32 Slide Unit CX/M/L Series Slide Bearing/CX:ø0, ø, ø5 M:ø0, ø, ø0, ø5, ø3 Ball Bushing Bearing/L:ø0, ø, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy

More information

Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet

Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet L F Mounting style asic style xial foot style Rod side flange style With auto switch CVJ L CDVJ L 6 6 How to Order pplicable uto Switches/Refer to pages to for further information on auto switches. Type

More information

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g. Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable

More information

Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods

Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 46-54 www.cmafh.com Guide Cylinder Series MGG ø, ø, ø, ø, ø, ø, ø, ø Integration of a basic cylinder and guide

More information

Mini Free Mount Cylinder

Mini Free Mount Cylinder Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING

More information

Heavy Duty Stopper Cylinder

Heavy Duty Stopper Cylinder Heavy Duty Stopper Cylinder Series ø, ø32 To stop pallets gently Stopper cylinder with built-in shock absorber Amount of energy absorption can be adjusted to suit the load. Stops the workpiece gently with

More information

Parallel Style Air Gripper: Wide Type

Parallel Style Air Gripper: Wide Type Parallel Style Air Gripper: Wide Type Series MHL Built-in dust-protection mechanism A scraper with a dust lip is adopted for all rod rotating parts. A large amount of gripping force is provided through

More information

1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1

1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1 1.20 L INEAR ACTUATOR: AIR CYLINDER A IR CYLINDER BORE SIZES Ø20~100MM Double acting Clean line A substantial reduction in overall length compared to tie bar designed cylinders High velocity Magnetic piston

More information

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718.

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718. Courtesy of CM/lodyne/ydradyne Motion Control ydraulic Pneumatic lectrical Mechanical () - www.cmafh.com With auto switch With auto switch (uilt-in magnet) G C CM CM uilt-in Magnet Cylinder Model If a

More information

Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.

Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected. Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and

More information

Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design

Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design ompact ylinder Series QS ø, ø, ø, ø Ideal for machine designs with small space requirements The - and -M auto switches will not protrude from switch mounting groove. Square body shape gives you flexibility

More information

New cylinder body allows small auto switches to be mounted on 4 surfaces.

New cylinder body allows small auto switches to be mounted on 4 surfaces. Toggle Type Air Gripper ø32, ø4, ø5, ø63 New cylinder body allows small auto switches to be mounted on 4 surfaces. RoH Auto switch mounting rail removed. A round slot for mounting small auto switches is

More information

Series CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch

Series CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch ylinder with Lock ouble Acting, Single Rod Series S ø1, ø, ø ow to Order Without auto switch With auto switch S S L L 1 1 1 1 - X16 - X16 uilt-in magnet L 1 ounting style asic style oot style Rod side

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

Square Tube Type Air Cylinder

Square Tube Type Air Cylinder Standard: Double cting Single Rod Series C6 Square Tube Type ir Cylinder Series 1 ø, ø, ø, ø, ø, ø Single rod type Series 1 Double rod type Series 1W Non-rotating rod type Series 1K CJ1 CJP CJ2 CM2 C8

More information

CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting

CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return

More information

22mm Space required between the bottom of the cylinder body and your equipment is reduced.

22mm Space required between the bottom of the cylinder body and your equipment is reduced. Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner

More information

Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact.

Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø, ø, ø1, ø, ø, ø With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Series Variations

More information