How to Order Manifold FD2. Manifold mounting. D DIN rail mount style Note) E Direct mount style. Note) C kit of SQ2000 only. Cable specifications

Transcription

1 For details about certified products conforming to international standards, visit us at Series SQ000 Plug Lead Unit How to Order Manifold SSQ 0 FD D Electrical entry F kit D-sub Connector kit P kit Kit type Flat ribbon cable connector kit J kit Flat ribbon cable (0P) (PC Wiring System compatible) C kit P ( 0P ) 0 FD0 FD FD FD PD0 PD PD PD PDC JD0 Note) Stations station stations () Note) The maximum number of stations depends on the type of electrical entries. Lead wire connector location Manifold mounting D DIN rail mount style Note) E Direct mount style Note) C kit of SQ000 only. Cable specifications D-sub connector (P) kit, without cable D-sub connector (P) kit, with. m cable D-sub connector (P) kit, with.0 m cable D-sub connector (P) kit, with.0 m cable Flat ribbon cable (P) kit, without cable Flat ribbon cable (P) kit, with. m cable Flat ribbon cable (P) kit, with.0 m cable Flat ribbon cable (P) kit, with.0 m cable Flat ribbon cable (0P) kit, without cable Flat ribbon cable (0P) PC Wiring System compatible Option Nil None () 0 to DIN rail length specified ack pressure check valve () K Special wiring specifications (Except double wiring) N With name plate (Side ported only) R External pilot specifications S uilt-in silencer, direct exhaust Note ) For specifying DIN rail length, indicate D. (Enter the number of stations inside.) Example: -D0 Note ) Standard wiring specification are for double wiring. Indicate wiring specifications for single wiring or mixed single and double wiring, or when exceeding the standard maximum number of stations. (Except C kit) Note ) For specifying two or more options, enter them alphabetically. Example: -KN Station to stations to stations to stations to stations Max. number of stations for special wiring specifications stations stations stations stations () Max. number of solenoids C Connector kit to stations Connector kit Note ) Separately order the 0P type cable assembly for the P kit. Note ) The maximum number of stations should not be more than the maximum number of solenoids. (The number of solenoids are counted as: for single solenoids and for type P and P double solenoids.) --70

2 Plug Lead Unit Series SQ000 How to Order Valves SQ 0 L C Type of actuation C () () position single () () (R)(P)(R) position double (Latching) () () () () (R)(P)(R) (R)(P)(R) Metal seal Rubber seal position double (Double solenoid) () () () () () (R)(P)(R) Metal seal Rubber seal position closed center () () (R)(P)(R) position exhaust center position pressure center position dual port valve () (R) (P) N.C. N.C. position dual port valve () () () (R) (P) () (R) (R) N.O. N.O. position dual port valve () (R) () () (R)(P)(R) () () (R)(P)(R) (P) () (R) (R)(P)(R) N.C. N.O. Note ) For double solenoid specifications, the function symbol below is D. Note ) Only rubber seal types are applicable. Seal 0 Metal seal Rubber seal Manual override Nil Non-locking push type (Tool required) With/Without manifold block Nil M Without manifold block When ordering with manifolds When only valves are required. Port plug mounting port Nil None Port () Port () Cylinder port C One-touch fitting for ø. C One-touch fitting for ø C One-touch fitting for ø M M thread L One-touch fitting for ø. L One-touch fitting for ø L One-touch fitting for ø L M thread With manifold block M With manifold block, built-in back pressure check valve Lead wire is not included. Lead wire is not included. Note) Locking type (Tool required) For adding stations Side ported Note) Top ported Note) Can be changed to side ported configuration. VQC SQ VQ0 VQ VQ VQZ VQD Nil D K N Y R () () () Function Standard type (.0 W DC) position double (Double solenoid specifications) High pressure type (.0 MPa,.0 W DC) [pplicable to metal seal only] Negative COM Low wattage type (0. W DC) External pilot specifications Note ) Except double (latching) type. Note ) Except dual port valves. Note ) When two or more symbols are specified, indicate them alphabetically. Electrical entry L Plug connector type With 00 mm lead wire Note) Except double (latching) type. LO Plug connector type without connector Coil voltage VDC VDC Note) Light/Surge voltage suppressor is built-in. Note) For F, P, J kit manifolds Note) Indicate LO when ordering centralized wiring type manifolds, F, P, and J kits, since the lead wire will be attached to the manifold side. --7

3 R P R P Series SQ000 Manifold Option lanking plate SSQ SMC N00 P. -- Individual SUP/EXH spacer P. -- Name plate (-N) P. --0 External pilot P. --0 C SSQ000-PR-- L SSQ000-N-n specifications (-R) External pilot port Individual SUP spacer P. -- EXH block plate P Port plug P. --0 Silencer P. --0 C SSQ000-P--L SSQ000--R VVQZ00-CP (For EXH port) SUP/EXH block P. -- SUP block plate P lanking plug P. --0 Dual flow fitting P. --0 C SSQ000-PR--C (-S) SSQ000--P KQP-/0/0/0 SSQ000--N Individual EXH spacer P. -- ack pressure P uilt-in silencer (-S) P. --0 Special wiring P. --0 C SSQ000-R-- check valve (-) L specifications (-K) SSQ000-P D-sub connector Terminal no station stations stations stations stations stations 7 stations stations COM. ( ) ( ) ( ) ( ) ( ) ( ) ( ) 7 ( ) ( ) ( ) ( ) ( ) Connector terminal no. lthough the standard products come with double wiring, mixed single and double wiring is available upon request. --7

4 Plug Lead Unit Series SQ000 How to Order Manifold ssembly (Example) Example: D-sub connector kit, with cable ( m) position single ( VDC) SQ0-L0-C ( sets) position double (Latching) ( VDC) SQ0-L0-C ( sets) lanking plate SSQ ( set) m D-sub connector cable XT00-DS-00 F kit (D-sub connector kit) Stations 7 SQ0-L0-C SQ0-L0-C SQ0-L0-C SQ0-L0-C SQ0-L0-C SQ0-L0-C SQ0-L0-C SQ0-L0-C SSQ Cylinder port fitting C: One-touch fitting for ø Manifold base ( stations) SSQ-0FD-D VQC SQ VQ0 VQ VQ VQZ VQD SSQ-0FD-D set (F kit station manifold base) SQ0-L0-C sets ( position single) SQ0-L0-C sets ( position double [latching]) SSQ set (lanking plate) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers in order starting from the first station on the. When entry of part numbers becomes complicated, indicate on the manifold specification sheet. --7

5 Series SQ000 Valve Specifications Model Series SQ000 position position position Number of solenoids Single Double (Latching) Double (Double solenoid) Closed center Exhaust center Pressure center Dual port valve Flow oharacteristics Model / (P /) / / (/ R/R) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv Metal seal SQ Rubber seal SQ Metal seal SQ Rubber seal SQ Metal seal SQ0D Rubber seal SQD Metal seal SQ Rubber seal SQ Metal seal SQ Rubber seal SQ Metal seal SQ Rubber seal SQ Rubber seal SQ C Response time (ms) () Standard: W or less or less or less 0 or less 0 or less or less 0 or less or less 0 or less or less 0 or less or less or less Low wattage or less 0 or less or less 0 or less or less or less or less or less or less or less or less Note ) Values for the cylinder port size of C. Note ) ased on JIS 7-. (Values with a supply pressure of 0. MPa and light/surge voltage suppressor. Values fluctuate depending on the pressure and air quality.) Weight (g) JIS Symbol position single () () (R)(P)(R) position double (Latching) () () () () (R)(P)(R) (R)(P)(R) Metal seal Rubber seal position double (Double solenoid) () () () () (R)(P)(R) (R)(P)(R) Metal seal Rubber seal Specifications Valve specifications Solenoid specifications Valve construction Fluid Maximum operating pressure Single Double (Latching) Double (Double solenoid) position position Min. operating pressure mbient and fluid temperature Lubrication Pilot valve manual override Vibration/Impact resistance () Protection structure Coil rated voltage llowable voltage fluctuation Coil insulation type Power consumption (Current) VDC VDC Metal seal 0. MPa 0. MPa 0. MPa 0. MPa Rubber seal ir/inert gas () 0.7 MPa (High pressure type:.0 MPa) () 0 to 0 C 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa Not required Push type/locking type (Tool required) 0/0 m/s Dust tight VDC, VDC ±0% of rated voltage Equivalent to class W DC ( m), 0. W DC ( m) () W DC ( m), 0. W DC ( m) () Note ) Use dry air to prevent condensation when operating at low temperatures. Note ) Vibration resistance: No malfunction occurred in a one-sweep test between and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Values at the initial period) Note ) Metal seal type only. [Except double (latching) type.] Note ) Values for the low wattage (0. W) specification. position closed center () () (R)(P)(R) position exhaust center ()() position pressure center () () (R)(P)(R) position dual port valve () position dual port valve () N.O. N.O. position dual port valve (C) (R)(P)(R) N.C. N.C. N.C. N.O. --7

6 Plug Lead Unit Series SQ000 Manifold Specifications ase model Porting specifications Port size () (), () (P), (R) Port location Port size pplicable solenoid valve Type of connection () () () pplicable station station stations weight weight (g) (g) SSQ- - C (For ø) Option uilt-in silencer, direct exhaust Side () Top C (For ø.) C (For ø) C (For ø) M (M thread) L (For ø.) L (For ø) L (For ø) L (M thread) SQ 0 SQ F kit: D-sub connector P P kit: Flat ribbon cable 0P J kit: Flat ribbon cable PC Wiring System compatible C kit: Connector kit to stations to stations to stations to stations to stations Note ) One-touch fittings in inch sizes are also available. For details, refer to page --0. Note ) Can be changed to side ported configuration. Note ) n optional specification for special wiring is available to increase the maximum number of stations. Refer to page --0 for details. Note ) Except valves. For valve weight, refer to page --0. P/0P (P kit) 0P (J kit) VQC SQ VQ0 VQ VQ VQZ VQD (R) port (P) port (), () port P F kit P kit J kit C kit --7

7 Series SQ000 F Kit (D-sub connector kit) Simplification and labor savings for wiring work can be achieved by using a D-sub connector for the electrical connection. Using connector for flat ribbon cable (P) conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. Top or side entry for the connector can be changed freely, allowing later changes according to the mounting space. D-sub connector ( pins) XT00-DS D-sub connector cable assemblies can be ordered with manifolds. Refer to manifold ordering. D-sub Connector Cable ssembly Terminal No. L (.) D-sub Connector Cable ssembly (Option) Cable ssembly part no. Note length (L). m m m 0 SMC 7.0 XT00-DS-0 XT00-DS-00 XT00-DS-00 Electric characteristics Item Characteristics Conductor resistance Ω/km, 0 C or less Voltage limit VC, min. 000 Insulation resistance MΩ/km, 0 C or less Cable 0. mm x cores O.D. ø. ø0 Seal (length indication) Molded cover -M. x 0. Connector D-SF-N manufactured by Japan viation Electronics Industry, Ltd. Socket side Terminal no. Cable 0. mm x cores For other commercial connectors, use a pins type with female connector conforming to MIL-C-0. Cannot be used for transfer wiring. Note) The minimum bending radius for D-sub connector cables is 0 mm. Cable assembly Terminal Number Lead wire color rown Red Orange Yellow Pink lue Purple Gray Yellow Orange Yellow Pink lue Purple Gray Orange Red rown Pink Gray Dot marking None None None None None None None Red Red Red None None Red Red None Connector manufacturers example Fujitsu, Ltd. Japan viation Electronics Industry, Ltd. J.S.T. Mfg. Co., Ltd. Hirose Electric Co., Ltd. Manifold Specifications Series SQ000 Port location Side, Top Porting specifications Port size (P), (R) (), () C Electrical wiring specifications D-sub connector station stations stations stations stations stations 7 stations stations stations 0 stations stations stations COM. C, C, C, M Maximum number of stations stations ( as an option) Valves are numbered from the. s the standard electrical wiring specifications, double wiring (connected to SOL. and SOL. ) is adopted for the internal wiring of each station for stations or less, regardless of valve and option types. Mixed single and double wiring is available as an option. For details, refer to page --0. Connector terminal no. Lead wire colors for D-sub connector assembly 0 XT00-DS- 00 Terminal no. Polarity Lead wire color Dot marking None Yellow rown None Pink Red None lue Orange None 7 Purple None Yellow None Gray None Pink None Orange 7 lue None 0 Red Purple rown Gray Pink Red 0 Gray Red Red Yellow Red None Orange Red Positive common specifications 00 Note) Negative common specifications stations Note) When using the negative common specifications, use valves for negative common. --7

8 Plug Lead Unit Series SQ000. M: External pilot port L L L. P =. Indicator light Manual override VQC SQ () 07. ( position). [Double (Double solenoid), Dual port valve] [Single, Double (Latching)] 7.PUSH.TURN.PUSH.TURN. VQ0 VQ VQ VQZ VQD -M clamp screw 0. Release for switching connector direction EXH outlet pplicable connector: D-sub connector (P) (Conforming to MIL-C-0) Stations 7 n C: (R) port C: SUP port For top ported (.) P =. n-c, C, C, M ((), () port) C: One-touch fitting for ø. C: One-touch fitting for ø C: One-touch fitting for ø M: M thread Dimensions L L L L n Formula: L =.n n: Stations (Maximum stations)

9 Series SQ000 P Kit (Flat ribbon cable connector) Simplification and labor savings for wiring work can be achieved by using a MIL type for the electrical connection. Using connector for flat ribbon cable (P, 0P) conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. Top or side entry for the connector can be changed freely, allowing later changes according to the mounting space. Manifold Specifications Series SQ000 Porting specifications Port Port size location (P), (R) (), () Side, Top C C, C, C, M Maximum number of stations stations ( as an option) Flat ribbon cable ( pins, 0 pins) 0 XT00-FC - Type P flat ribbon cable connector assemblies can be ordered with manifolds. Refer to manifold ordering. 0 (0P) 7. (P) Flat Ribbon Cable Connector ssembly (Option) Cable length (L). m m m Terminal no. (.) Red P XT00-FC- XT00-FC- XT00-FC- ssembly part no. Connector manufacturers example Hirose Electric Co., Ltd. Sumitomo M Limited Fujitsu Limited Japan viation Electronics Industry, Ltd. J.S.T. Mfg. Co., Ltd. Oki Electric Cable Co,. Ltd. L Cable assembly WG 0P XT00-FC0- XT00-FC0- XT00-FC0- For other commercial connectors, use a pins or 0 pins with strain relief conforming to MIL-C-0. Cannot be used for transfer wiring. Electrical wiring specifications Flat ribbon cable connector station stations stations stations stations stations 7 stations stations stations 0 stations stations stations <P> COM. COM. Connector terminal no. Triangle mark indicator position Terminal no. Polarity Positive common specifications stations Valves are numbered from the. Double wiring (connected to SOL. and SOL. ) is adopted for the internal wiring of each station, regardless of valve and option types. Mixed single and double wiring is available as an option. For details, refer to page --0. station stations stations stations stations stations 7 stations stations stations Note) Negative common specifications <0P> Terminal no. Polarity COM. COM Positive common specifications Note) Negative common specifications Note) When using the negative common specifications, use valves for negative common. --7

10 Plug Lead Unit Series SQ000 () 0. pplicable connector: Flat ribbon cable connector (P) (Conforming to MIL-C-0) 07. ( position) (.).. M: External pilot port. [Double (Double solenoid), Dual port valve] [Single, Double (Latching)] 7 Triangle mark indicator position Release for switching connector direction. 7 C: (R) port C: SUP port L L L. P=. 7 EXH outlet.push.turn.push.turn Stations 7 n For top ported Indicator light Manual override M clamp screw VQC SQ VQ0 VQ VQ VQZ VQD P =. n-c, C, C, M ((), () port) C: One-touch fitting for ø. C: One-touch fitting for ø C: One-touch fitting for ø M: M thread Dimensions L L L L n Formula: L =.n + n: Stations (Maximum stations)

11 Series SQ000 J Kit (PC wiring system compatible flat ribbon cable kit) PC Wiring System compatible. Using connector for flat ribbon cable (0P) conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. Top or side entry for the connector can be changed freely, allowing later changes according to the mounting space. Manifold Specifications Series SQ000 Porting specifications Port Port size location (P), (R) (), () Side, Top C C, C, C, M Maximum number of stations stations ( as an option) stations Valves are numbered from the. Electrical wiring specifications Double wiring (connected to SOL. and SOL. ) is adopted for the internal wiring of each station, regardless of valve and option types. Mixed single and double wiring is available as an option. For details, refer to page --0. Flat ribbon cable connector Connector terminal no. Triangle mark indicator position station stations stations stations stations stations 7 stations stations Terminal no. Polarity COM. COM. Note) Positive Negative common common specifications specifications Note) When using the negative common specifications, use valves for negative common. For details about the PC Wiring System, refer to catalog CT.ES0-0 separately. --0

12 .TURN.PUSH.TURN.PUSH Plug Lead Unit Series SQ000 () 0. pplicable connector: Flat ribbon cable connector (0P) (Conforming to MIL-C-0) 07. ( position). [Double (Double solenoid), Dual port valve] [Single, Double (Latching)] 7 Triangle mark indicator position Release for switching connector direction (.).. M: External pilot port C: (R) port C: SUP port L L. L 7. P =. 7 EXH outlet Stations 7 n For top ported Indicator light Manual override M clamp screw VQC SQ VQ0 VQ VQ VQZ VQD P =. n-c, C, C, M ((), () port) C: One-touch fitting for ø. C: One-touch fitting for ø C: One-touch fitting for ø M: M thread Dimensions L L L L n Formula: L =.n n: Stations (Maximum stations)

13 Series SQ000 C Kit (Connector) Standard with lead wires connected to each valve individually. Manifold Specifications Series Port location Porting specifications Port size (P), (R) (), () Maximum number of stations SQ000 Side, Top C C, C, C, M stations stations Valves are numbered from the. Wiring Specifications: Positive COM Specifications Wiring Specifications: Negative COM Specifications (Option) Since lead wires are connected to the valves as shown below, connect each wire to the power supply. Single solenoid Lead wire color COM. Red : side solenoid Since lead wires are connected to the valves as shown below, connect each wire to the power supply. Single solenoid Lead wire color Red COM. Red: side solenoid Red: COM : COM Double solenoid Lead wire color COM. Red : side solenoid Double solenoid Lead wire color Red COM. Red: side solenoid Red: COM : side solenoid : COM : side solenoid Plug connector lead wire length The lead wire length of the valves with lead wire is 00 mm. When ordering a lead wire length of 00 mm or longer, list the part numbers for the valve without connector and the connector assembly. Example) For lead wire length of 000 mm: SQ0-LO-C pcs. XT-L-0 pcs. Connector ssembly Part No. Lead wire length Single solenoid Double solenoid Socket only ( pcs.) XT-L 00 mm XT-L XT-L 00 mm 000 mm 000 mm 000 mm XT-L- XT-L-0 XT-L-0 XT-L-0 XT-L- XT-L-0 XT-L-0 XT-L-0 Plug connector lead wire length The lead wire length of the valves with lead wire is 00 mm. When ordering a lead wire length of 00 mm or longer, list the part numbers for the valve without connector and the connector assembly. Example) For lead wire length of 000 mm: SQ0-LO-C pcs. XT-NL-0 pcs. Connector ssembly Part no. Lead wire length Single solenoid Double solenoid Socket only ( pcs.) XT-L 00 mm XT-NL XT-NL 00 mm XT-NL- XT-NL- 000 mm XT-NL-0 XT-NL mm XT-NL-0 XT-NL mm XT-NL-0 XT-NL-0 Note) When using the negative common specifications, use valves for negative common. --

14 Plug Lead Unit Series SQ000. L L L Lead wire length: 00. M: External pilot port. 7 P=. Indicator light Manual override VQC SQ () 07. ( position). [Double (Double solenoid), Dual port valve] [Single, Double (Latching)] 7.PUSH.TURN.PUSH.TURN. VQ0 VQ VQ VQZ VQD -M clamp screw 0. EXH outlet C: (R) port C: SUP port (.). Stations 7 n For top ported P =. n-c, C, C, M ((), () port) C: One-touch fitting for ø. C: One-touch fitting for ø C: One-touch fitting for ø M: M thread Dimensions L L L L n Formula: L =.n + n: Stations (Maximum stations)

15 Series SQ000/000 Manifold Option Parts for SQ000 lanking plate SSQ It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. 7 JIS Symbol. SUP/EXH block SSQ000-PR--C- Individual SUP spacer SSQ000-P-- C Option Nil R S Note) When specifying both options, indicate -RS. Specify the spacer mounting position on the manifold specification sheet. For standard type manifolds, the SUP/EXH block is mounted on the. It is added to the manifold to increase SUP/EXH capacity. The number of SUP/EXH blocks that can be added is limited to two sets, one between manifold stations and another on the of the manifold, due to the length of the lead wire. SUP/EXH blocks are not included in the number of manifold stations. Port location C Side ported L Top ported This is used as a supply port for different pressures when using different pressures in the same manifold (for one station). oth sides of the station which is used with supply pressure from the individual SUP spacer are shut off. (Refer to application example.) Specify the spacer mounting position and SUP passage shut off positions on the manifold specification sheet. Two shut off positions are required per unit. (Two pieces of SUP block plate that shut off the supply pressure are included with the individual SUP spacer, therefore, it is not necessary to order them separately.) Electrical wiring is also connected to the manifold station with the individual EXH spacer. y changing the fitting shown in the drawing and the block plates, the spacer s specification can be changed later (from the individual SUP spacer to the individual EXH spacer). The number of spacers is not limited when ordered with the manifold. However, when adding individual for F, P, and J kits, it is limited to two units, one between manifold stations and another on the, due to the length of the lead wire. Model no with manifold block: SSQ000-P-- C-M L Standard External pilot specifications uilt-in silencer Side ported Top ported Manifold block For top ported. 7 0 Individual SUP port One-touch fittings for ø (R) (P) Description/Model Valve Option (R) (P) Valve Description/Model Valve Option Single SUP/EXH block SSQ000-PR--C- Single Valve Valve Valve SUP/EXH block PR Individual SUP spacer C SSQ000-P-- SUP shut off position: Specify positions. SUP block plate (Ordering not required) Individual SUP spacer Valve L P Stations Stations (R) (P) SUP block plate (Ordering not required) Valve (R) (P) --

16 Plug Lead Unit Series SQ000/000 Individual EXH spacer SSQ000-R-- C Port location C Side ported L Top ported This is used to exhaust an individual valve when the exhaust from a valve interferes with other stations in the circuit (used for one station). oth sides of the station which is to be individually exhausted are shut off. (Refer to application example.) Specify the spacer mounting position and EXH passage shut off positions on the manifold specification sheet. Two shut off positions are required per unit. (Two pieces of EXH block plate that shut off the exhaust are included with the individual EXH spacer, therefore, it is not necessary to order them separately.) Electrical wiring is also connected to the manifold station with the individual EXH spacer. y changing the fitting shown in the drawing and the block plates, the spacer s specification can be changed later (from the individual EXH spacer to the individual SUP spacer). The number of spacers is not limited when ordered with the manifold. However, when adding individual for F, P, and J kits, it is limited to two units, one between manifold stations and another on the, due to the length of the lead wire. Model no. with manifold block: SSQ000-R-- C-M L Side ported Top ported For top ported. Manifold block Individual EXH port One-touch fittings for ø (R) (P) Description/Model Valve Option Single EXH block plate (Ordering not required) Individual EXH Valve spacer L Stations EXH shut off position: Specify positions. R EXH block plate (Ordering not required) Valve Valve (R) (P) VQC SQ VQ0 VQ VQ VQZ VQD Individual SUP/EXH spacer SSQ000-PR-- C Port location C L Side ported Top ported Side ported This has both functions of the individual SUP and EXH spacers above. (Refer to application example.) Top ported Specify the spacer mounting position and SUP and EXH passage shut off positions on the manifold specification sheet. Two shut off positions each for SUP and EXH are required per unit. (Two pieces each of block plate that shut off the SUP and EXH passages are included with the individual SUP/EXH spacer.) Electrical wiring is also connected to the manifold station with the individual EXH spacer. Manifold block y changing the fitting shown in the drawing Individual EXH port and the block plates, the spacer s specification For top ported One-touch fittings for ø can be changed later. The number of spacers is not limited when ordered with the manifold. However, when adding individual for F, P, and J kits, it is limited to two units, one between manifold stations and another on the, due to the length of the lead wire. Model no. with manifold block: SSQ000-PR-- C-M L (R) (P) Description/Model lock plate (Ordering not required) SUP Individual EXH Valve spacer PR lock plate (Ordering not required) Valve Valve (R) (P) Valve Option Single Individual EXH spacer SSQ000-R--C Individual SUP/EXH spacer C SSQ000-PR-- SUP shut off position: Specify positions. EXH shut off position: Specify positions. Stations L. Individual SUP port One-touch fittings for ø --

17 Series SQ000/000 Manifold Option Parts for SQ000 SUP block plate SSQ000--P When supplying two different pressures, high and low, to one manifold, this is used between stations with different pressures. lso, it is used with an individual SUP spacer to shut off the air supply. Specify the station position on the manifold specification sheet. <Shut off label> When a SUP passage is shut off with a SUP block plate, a label is attached for external confirmation of the shut off position (one label each). Shut off labels are applied when SUP block plates are ordered with manifolds. SUP passage R P R P R P ø. O-ring ø SUP passage blocked SUP/EXH passage blocked EXH block plate SSQ000--R When the exhaust from a valve interferes with other stations in the circuit, this is used between stations to separate exhausts. lso, it is used with an individual EXH spacer to shut off the exhaust of individual valves. Specify the station position on the manifold specification sheet. <Shut off label> When an EXH passage is shut off with an EXH block plate, a label is attached for external confirmation of the shut off position (one label each). Shut off labels are applied when EXH block plates are ordered with manifolds. R P R P EXH passage R P.. O-ring EXH passage blocked SUP/EXH passage blocked ack pressure check valve [-] SSQ000-P This prevents cylinder malfunction caused by the exhaust from other valves.it is inserted into the R (EXH) port of the valve that is affected. It is especially effective when using single acting cylinders or exhaust center type solenoid valves. When installing back pressure check valves only on the stations required, enter the part number and specify the station positions on a manifold specification sheet. When installing back pressure check valves on all of the stations, indicate - at the end of the manifold part number. Caution. lthough the back pressure check valve is an assembly part with a check valve mechanism, a small amount of air leakage is allowed. Therefore, take care not to restrict the exhaust air from the exhaust port.. The effective area of valves is about 0% less when the back pressure check valve is installed.. Since port specification valves ( (R) and (R) are common) are used, back pressure cannot be prevented with dual port valves.. ø

18 Plug Lead Unit Series SQ000/000 Name plate [-N] SSQ000-N-Stations ( to maximum) This is a clear resin plate for applying solenoid valve function description labels, etc. To install, bend the plate slightly as shown and insert into the slots on the end plate side. lso, the plate is difficult to bend for manifolds with only a few stations, therefore, remove the silencer cover to install it. When ordering with manifolds, add -N at the end of the manifold number. 0. P =. 7 n: Stations VQC SQ Silencer cover VQ0 VQ lanking plug (For One-touch fitting) KQP This is inserted into cylinder ports and SUP and EXH ports that are not used. Purchasing order is available in units of 0 pieces. L ød ød Dimensions pplicable fittings size (ød). Model KQP- KQP-0 KQP-0 KQP-0 0. L. D. 0 VQ VQZ VQD Port plug VVQZ00-CP This is used to close the cylinder ports when changing a port valve to a port valve. dd or at the end of the valve part number when ordering with valves. Example) SQ-L-C- (N.O. specifications) () port plug Example) SQ-L-C- (N.C. specifications) port ø0 () port plug Example) SQ-L-C--M ( port plug with manifold block) port O-ring Direct EXH outlet, built-in silencer [-S] The EXH outlet is placed on the top side of the manifold end plate. The built-in silencer provides highly effective noise reduction. (Noise reduction of 0 d) Note) Note that when excessive drainage occurs in the air supply, the drainage will be released along with the exhaust. dd -S at the end of the manifold part number when ordering with manifolds. For precautions on handling and how to replace elements, refer to page --. EXH outlet --0

19 Series SQ000/000 Manifold Option Parts for SQ000 External pilot specifications [-R] This can be used when the air pressure is 0. to 0. MPa lower than the minimum operating pressure of the solenoid valves or used for vacuum specifications. dd R to the part numbers of manifolds and valves to indicate the external pilot specification. n M port will be installed on the top side of the manifold s SUP/EXH block. How to order valves (Example) SQ0 R -L-C External pilot specifications How to order manifold (Example) Indicate R for an option. SSQ-0FD-DR External pilot specifications External pilot port (M x 0.) SUP/EXH block Note ) Not applicable for dual port valves. Note ) Indicate RY for low wattage types. Note ) Valves with the external pilot specifications have a pilot EXH with individual exhaust specifications and EXH can be pressurized. However, the pressure supplied from EXH should be 0. MPa or lower. Dual flow fitting SSQ000-- C Port size C N ø ø/" C: ø One-touch fitting N: ø/" One-touch fitting To drive a large bore cylinder, two valve stations are operated simultaneously to double the air flow. This fitting is used on the cylinder ports in this situation. vailable sizes are ø and ø/" One-touch fitting. When ordering with valves, specify the valve part number without One-touch fitting and list the dual flow fitting part number. Example) Valve part number (without One-touch fitting part number) SQ-L- C0 sets C SSQ000-- N set.. Silencer (For EXH port) This is inserted into the centralized type EXH port (One-touch fitting). pplicable fittings size ø 77.. ø SMC N00 Specifications Series Model SQ000 N00-KM Effective area (mm ) (Cv factor) Noise reduction (d) 0 (.) 0 --0

20 Series SQ000/000 Manifold Option Parts for SQ000/SQ000 Special Wiring Specifications In the internal wiring of F kit, P kit, and J kit, double wiring (connected to SOL. and SOL. ) is adopted for each station regardless of the valve and option types. Mixed single and double wiring is available as an option.. How to order Indicate option symbol -K in the manifold part number and be sure to specify station positions for single or double wiring on the manifold specification sheet. Example) SSQ- 0 FD0 - DKS Others, option symbols: to be indicated alphabetically.. Wiring specifications Connector terminal numbers are connected from solenoid station on the side in the order indicated by the arrows without skipping any terminal numbers. COM. COM COM COM COM COM. COM. F kit D-sub connector (for P) P kit Flat ribbon cable connector (for P) P kit Flat ribbon cable connector (for 0P) J kit Flat ribbon cable connector (0P) PC Wiring System compatible. Maximum stations The maximum number of manifold stations is determined by the number of solenoids. Count one point for a single solenoid type and two points for a double solenoid type. Determine the number of stations so that the total number of solenoids is no more than the maximum points in the table below. Kit Type Max. points F kit (D-sub connector) FD P points PD P points Note) Maximum stations SQ000: stations SQ000: stations P kit (Flat ribbon cable connector) PDC 0P points J kit Flat ribbon cable PC Wiring System compatible JD0 0P points --0

21 Plug Lead Unit Series SQ000/000 Special DIN Rail Length (DIN rail mounting (-D) only) The standard DIN rail provided is approximately 0 mm longer than the overall length of the manifold with a specified number of stations. The following options are also available. DIN rail length longer than the standard type (for stations to be added later, etc.) In the manifold part number, specify -D for the manifold mounting symbol and add the number of required stations after the symbol. Example) SSQ- 0FD0 - D0NK station manifold Ordering DIN rail only DIN rail part number XT00- DR - n Option symbols (alphabetically) DIN rail for stations Note) For n, enter a number from the No. line in the table below. For L dimension, refer to the dimensions of each kit. L. P =.. 7. VQC SQ VQ0 VQ VQ VQZ VQD. L Dimension L =. x n + 0. No. L dimension No. L dimension No. L dimension No. L dimension Direct Mounting Style (-E) (SQ000 C kit only) Manifold is mounted by using mounting holes of both sides of the manifold. DIN rail is not sticking out of the edge of end plate. Mounting hole (For M) Mounting hole (For M) --0

22 Series SQ000/000 Manifold Option for SQ000/SQ000 Negative Common Specifications The following valve part numbers are for negative COM specifications. Manifold part numbers are the same as standard. How to order negative COM valves (Example) SQ0 N -L-C Negative common specifications Inch-size One-touch Fittings For One-touch fittings in inch sizes, use the following part numbers. lso, the color of the release button is orange. How to order valves (Example) SQ0-L- N7 Port location Nil L Side ported Top ported Cylinder port Symbol pplicable tubing O.D. (Inch) SQ000 (), () port SQ000 N ø/" N ø/" N7 ø/" N ø/" How to order manifold (Example) dd 00T at the end of the part number. SSQ- 0 FD0-DN - 00T (P), (R) port in inch size SQ000: ø/" (N) SQ000: ø/" (N) --0

23 Plug Lead Unit Series SQ000/000 How to dd Manifold Stations for SQ000/SQ000. How to dd Manifold Stations What to order Valves with manifold block (refer to pages --7 and --) or the manifold blocks shown below. For F kit, P kit, and J kit, also order the lead wire assemblies in the next section. Manifold lock Part No. SQ000 SQ000 VQC SQ VQ0 VQ VQ VQZ VQD SSQ000 SSQ000 Option Nil None ack pressure check valve R External pilot specifications Note) Enter -R for both options. Option Nil None ack pressure check valve R External pilot specifications Note) Enter -R for both options. --

24 Series SQ000/000 How to dd Manifold Stations for SQ000/SQ000 For F kit, P kit, J kit What to order: Lead wire assembly SQ000 D-sub connector kit (F kit) For single wiring SSQ000 0 F 0 C C C C For double wiring SSQ000 F 0 Flat ribbon cable kit (P kit), PC Wiring System compatible (J kit) For single wiring SSQ000 For double wiring SSQ000 0 P L L L L 00 P 7 Stations Symbol (L dimension) Stations Symbol (L dimension) Station Station Station Station Station Station 7 Station Station Station 0 Station Station Station Station Station Station Station 7 Station Station Station 0 Station Station Station Station Stations Symbol (L dimension) Stations Symbol (L dimension) Station 0 Station Station 70 Station 0 Station Station Station 00 Station 7 0 Station 0 Station 70 Station 7 Station 0 Station 0 Station 0 Station Station 00 Station 0 7 Station Station Station 0 Station Station Station 0 --

25 Series SQ000/000 How to dd Manifold Stations for SQ000/SQ000 Steps for adding stations () Loosen the clamp screw on the end plate and open the manifold. () Mount the manifold block or valve with manifold block to be added. () Press on the end plate to eliminate any space between the manifold blocks and tighten the clamp screw. (Proper tightening torque: 0. to.0 N m) () In the case of F kit, P kit or J kit, remove the connector housing from the DIN rail and connect the wiring. () () () () () () Connector housing (F kit is shown.) --

26 Plug Lead Unit Series SQ000/000. Connection Method () Connecting common wire Insert the red lead wire (common wire) of the connector to be added into the adjacent connector as shown in the drawing below. fter inserting, Connector to be added (SOL. ) VQC SQ VQ0 VQ (SOL. ) VQ VQZ Socket Red (COM wire) VQD () Pulling out connector Housing Pull out the connector to connect the lead wires for SOL. and SOL.. Insert a flat head screwdriver into the slot of the housing cover and remove it. Remove the manual lever and pull out the connector. (F kit) (P, J kit) Connector Protrusion Stopper Connector Remove the stopper and pull out the connector. Manual lever Spring Housing cover Slot F, P, J kit --

27 Series SQ000/000 How to dd Manifold Stations for SQ000/SQ000 () Connector connection/connect the black and white lead wire pins to the positions shown below in accordance with each kit. Caution. fter inserting the pin, confirm that the pin hook is locked by lightly pulling the lead wire.. Do not pull the lead wire forcefully when connecting. lso, take care that lead wires do not get caught between manifolds or when remounting the housing. Wiring (F kit: D-sub connector kit) Procedure) ased on the manifold specifications, station of SOL.. (black wire) will be terminal number of the D-sub connector, and for station and thereafter, connect black wires, then white wires in the order as shown below by the arrows. Lead wire assembly Connector terminal no. Hook Red (COM) Manifold Specifications Example Stations Single wiring Double wiring Station, SOL. Station, SOL. Station, SOL. Station, SOL. Station, SOL. COM Station, SOL. Station, SOL. Station, SOL. station Station, SOL. stations The drawing above shows connections based on the manifold specification example in the table to the left. stations stations stations stations COM Terminal Lead wire no. color 7 Red Wiring (P kit: Flat ribbon cable kit) Procedure) ased on the manifold specifications, station of (black wire) will be terminal number of the flat ribbon cable connector, and for station and thereafter, connect black wires, then white wires in the order as shown below by the arrows. Terminal no. Lead wire assembly Protrusion Red (COM) Manifold Specifications Example Stations Single wiring Double wiring Station, SOL. Station, SOL. Station, SOL. Station, SOL. Red (COM) Station, SOL. Station, SOL. Station, SOL. station Station, SOL. stations Station, SOL. stations Red (COM) The drawing above shows connections for type P flat ribbon cable connector based on the manifold specification example in the table to the left. For type 0P, the connection will be the same as above except that COM changes to 0 and 0. stations stations stations Terminal no. COM COM Lead wire color Red Red --

28 Plug Lead Unit Series SQ000/000 Wiring (J kit: Flat ribbon cable, PC Wiring System compatible) Procedure) ased on the manifold specifications, station of (black wire) will be terminal number 0 of the flat ribbon cable connector, and for station and thereafter, connect black wires, then white wires in the order as shown below by the arrows. Terminal no. Protrusion Lead wire assembly Red (COM) Manifold Specifications Example Stations Single wiring Red (COM) Unused Station Station Station Station Station Station Station Station Red (COM) Unused Station station stations stations stations stations stations COM Terminal no Lead wire color Red VQC SQ VQ0 VQ VQ VQZ VQD Double wiring COM Red --7

29 Series SQ000/000 Construction: Series SQ000 Plug Lead Type Main Parts and Pilot Valve ssembly Metal seal type Single: SQ0 r e q w Rubber seal type Single: SQ r e q w SQ0 ()() SQ ()() (R) (P)(R) (R)(P)(R) Double (Latching): SQ0 t e q w Double (Latching): SQ t e q w SQ0 ()() SQ ()() (R)(P)(R) (R)(P)(R) Double (Double solenoid): SQ0D y e qw e Double (Double solenoid): SQD y e q w e SQ0D ()() SQD ()() u (R)(P)(R) u (R)(P)(R) position: SQ 0 y e q w e position: SQ y e q w e u u SQ0 ()() SQ0 ()() SQ0 ()() SQ ()() SQ ()() SQ ()() Component Parts No. q w e Pilot Valve ssembly No. r t y u (R) (P)(R) Description ody Spool/Sleeve Spool Piston Note) (R) (P)(R) Material Zinc die-casted Stainless steel (Metal seal) luminum (Rubber seal) Resin Model SQ (K) For single VQ0 (Y) - (N)J() VQ0L- J For double (Latching) Negative COM: VQ0N- J For double (Double solenoid) on side (K) VQ0 (Y)- (N)J() For P, Dual port on side For double (Double solenoid) on side (K) VQ (Y)- (N)J For P, Dual port on side -- Note) Nil: Standard : Locking type manual override K : High pressure specifications (metal seal only) N : Negative common specifications Y : Low wattage specifications (R) (P)(R) Dual port valve: SQ C u (R)(P)(R) y SQ e w (R) (P)(R) qw SQ e N.C. N.C. N.O. N.O. (R) (P)(R) SQC N.C. N.O.

30 Series SQ000/000 Exploded View of Manifold: SQ000 (Plug lead type manifold) SSQ (F, P, J, C kit) Wiring unit assembly end plate assembly SUP/EXH block assembly Valve and manifold block assembly end plate assembly e! F kit y q t i u!! P kit (P/0P) J kit (0P) e r!0 o P (J) kit w --0

31 Plug Lead Unit Series SQ000/000 Manifold Spare Parts Refer to pages -- to --7 of How to dd Manifold Stations regarding the mounting of each spare parts. <q D-sub connector housing assembly> XT00 XT00 For to station 0 FL S 0 Wiring S D Single wiring Double wiring 0 SSQ000 F 0 For single (-wire) For double (-wire) SSQ000 F 0 Wiring 0 For single (-wire) For double (-wire) Lead wire length Wiring 0 For single (-wire) For double (-wire) Wiring 0 For single (-wire) For double (-wire) Lead wire length Wiring Wiring S D Single wiring Double wiring For double (-wire) For single (-wire) Stations 0 For station For stations <w Flat ribbon cable connector housing assembly> Stations Station Station Station Station Station Station 7 L dimension (mm) (For P, J kit) For station For to station Stations Station Station Station Station Station Station 7 (For C kit) 0 Stations Station Station Station 0 Station Station Station L dimension (mm) PL PL0 JL0 Stations Station Station Station Station 7 Station Station L dimension (mm) S Stations Station 0 Station Station Station Station L dimension (mm) SSQ000 P 0 SSQ000 P 00 L dimension (mm) Stations Station Station Station 0 Station Station Station L dimension (mm) XT L Note) Stations 0 For station For stations <e Lead wire assembly> (For F kit) For station Wiring Stations Station Station Station Station 7 Station Station L dimension (mm) Stations Station 0 Station Station Station Station L dimension (mm) 00 0 Lead wire length Symbol Nil L dimension (mm) Note) PL: 0 to (P kit, P) PL0: 0 to (P kit, 0P) JL0: 0 to (J kit, 0P) <r end plate assembly> SSQ000 <t end plate assembly> SSQ000 <y SUP/EXH block assembly> SSQ000 PR C Port size C C N7 N <i Element> SSQ000 <o Port plug> VVQZ000 One-touch fitting for ø One-touch fitting for ø One-touch fitting for ø/" One-touch fitting for ø/" Option Nil R S <!0 Fitting assembly> (For P, R port) Common exhaust type External pilot uilt-in silencer, direct exhaust Note) Enter -RS for both options. <u Manifold block assembly> SSQ000 SE Note) Part number for a 0 piece set of elements. Refer to page -- for replacement procedures. VVQ000 Port size CP C One-touch fitting for ø C One-touch fitting for ø N7 One-touch fitting for ø/" N One-touch fitting for ø/" Note) Purchasing order is available in units of 0 pieces <! Fitting assembly> (For cylinder port) VVQ000 0 C Port size Option Nil R None ack pressure check valve External pilot specifications Note) Enter -R for both options. C C One-touch fitting for ø. C One-touch fitting for ø C One-touch fitting for ø M M thread N One-touch fitting for ø/" N One-touch fitting for ø/" N7 One-touch fitting for ø/" Note) Purchasing order is available in units of 0 pieces <! Gasket and screw assembly> GS Including gaskets! SQ000 Note) Part number for 0 pieces each of gaskets and screws. -- VQC SQ VQ0 VQ VQ VQZ VQD