Grommet (G) (Standard) 100 VAC, 50/60 Hz 200 VAC, 50/60 Hz 24 VDC

Transcription

1 5 Port Pilot Operated Solenoid Valve Metal Seal Series S Series Variations Body Ported Base Mounted Series S000 S000 S000 S000 S000 S4000 S5000 Sonic conductance C [dm /s bar)] 4/ 5/(A/B R/R) Single Double position Type of actuation position single position double position closed center position exhaust center position pressure center position single position double position closed center position exhaust center position pressure center position double check Voltage Electrical entry With light/surge voltage suppressor (Option) (Standard) 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 4 VDC (Option) 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 40 VAC, 50/60 Hz VDC 00 VDC (Standard) 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 4 VDC (Option) 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 40 VAC, 50/60 Hz VDC 00 VDC Grommet (G) Conduit terminal (T) Conduit terminal (F) Non plug-in Grommet terminal (E) Plug-in Conduit terminal (F) Non plug-in Grommet terminal (E) DIN terminal (D) With light/surge voltage suppressor Grommet terminal (EZ) Conduit terminal (TZ) DIN terminal (DZ) With surge voltage suppressor Grommet (GS) Note) Indicator light is not available for grommet type. Only surge voltage suppressor can be equipped on the middle of lead wire. With light/surge voltage suppressor Manual override Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) Locking type (Lever) Locking type (lever) is not available for body ported Series S000/000. Grommet (G) Conduit terminal (T) Plug-in Grommet terminal (E) DIN terminal (D) DIN terminal (D) With light/surge voltage suppressor Conduit terminal (FZ) Grommet terminal (EZ) Conduit terminal (TZ) DIN terminal (DZ) With surge voltage suppressor Grommet (GS) Note) Indicator light is not available for grommet type. Only surge voltage suppressor can be equipped on the middle of lead wire. Conduit terminal (FZ) Grommet terminal (EZ) DIN terminal (DZ) Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) Locking type (Lever) R S S N S position single position double Plug-in Conduit terminal (F) Non plug-in Grommet terminal (E) DIN terminal (D) Non-locking push type (Flush) -8-

2 Series S000/000/000/4000/5000/6000 Manifold Variations Manifold Bar base Stacking base With attachment plug lead wire With terminal block With multiconnector With D-sub connector Non plug-in (Connection to each valve) Body Ported S000 S000 S000 Base Mounted Plug-in Type S000 S000 S4000 S5000 Base Mounted Non Plug-in Type S000 S000 S4000 S5000 Bar Base (Series S000/000) Pilot individual EXH Plug-in With terminal block Pilot common EXH With attachment plug lead wire With multi-connector With D-sub connector Stacking base (Series S000) Pilot common EXH Non Plug-in Grommet terminal DIN terminal Bottom piping is available as an option. -8-

3 Series S000/000/000/4000/5000/6000 With exhaust cleaner Manifold Option With control unit With serial transmission unit Individual SUP spacer Individual EXH spacer SUP block disk Manifold Option Parts EXH block disk Throttle valve spacer Interface Air shutoff regulator valve spacer Air release valve spacer Double check spacer Blanking plate R Note) Note) S Note) S Note) N With exhaust cleaner Individual SUP spacer Interface regulator Individual EXH spacer Air shutoff valve spacer With control unit Air release valve spacer SUP/EXH block disk With serial transmission unit Throttle valve spacer Double check spacer Note) Available -8-

4 Series S000/000/000/4000/5000/6000 Precautions 4 Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page --. Caution Light/Surge Voltage Suppressor, Electrical Entry Single unit Body Ported Series S000/000/000 Light/Surge Voltage Suppressor AC and 00 VDC With indicator light Terminal no. (+) Single Terminal no. ( ) B side Terminal no. (+) With indicator light A side Base Mounted Light/Surge Voltage Suppressor In the case of surge voltage suppressor, surge voltage absorption device ZNR is attached to AC power. AC and 00 VDC With indicator light Lead wire, red Single Series S000 Exchange of pilot valve (Voltage exchange) When changing rated voltage and electrical entry etc., pilot valve assembly can be changed since this is a plug-in type. Pilot valve assembly Pilot valve assembly Double Terminal no. ( ) Terminal no. ( ) 4 VDC or less With indicator light Terminal no. +( ) Single Terminal no. (+) Note) There is no polarity (+, ). B side Terminal no. +( ) With indicator light Terminal no. +( ) A side Double Terminal no. (+) With indicator light Note) There is no polarity (+, ). Terminal no. (+) Type G: Lead wire comes directly from the solenoid part. Connect it with the power source. Grommet with DC voltage surge voltage suppressor has polarity. Connect red lead wire to + (positive) side and black to (negative) side. Surge voltage suppressor DC AC Wiring In the case of DIN terminal and terminal block (with indicator light/surge voltage suppressor), the interior wiring is shown below. With DIN terminal block Red + Black With terminal block ZNR Applicable terminal:.5-,.5-s,.5y-n,.5y-s, but in the case of with DIN terminal block, is not a terminal structure. Note) There is no polarity. Changing Direction of DIN Terminal/Cable Entry To change direction of DIN terminal retaining screw, pull off outer cover, rotate connector board through 80. Replace cover and tighten screw. Changing Direction of Electrical Entry and Manual Override Loosen the set screw (M pcs.), take out pilot operator, turn solenoid valve 80 degrees to change the direction of lead wire and manual override. (Possible on Series S000 only.) Double 4 VDC or less Single Double Type G: Use lead wire from solenoid to connect with power side. Grommet with DC voltage surge voltage suppressor has polarity. Connect red lead wire to + (positive) side and black to (negative) side. Surge voltage suppressor DC AC Black B side lead wire, brown White Terminal no. +( ) Black With indicator light Terminal no. (+) Note) There is no polarity (+, ). How to Exchange With indicator light Red A side B side terminal no. +( ) With indicator light Terminal no. +( ) A side Terminal no. (+) Note) There is no polarity (+, ). With light/surge voltage suppressor Red + Black With light/surge voltage suppressor With indicator light Terminal no. (+) ZNR Solenoid valve Loosen set screws (hexagonal socket head cap screw M x ) and pull solenoid valve out vertically, otherwise it may cause damage to the solenoid valve. Never remove a valve at an angle. When mounting solenoid valve onto the base, plug pin assembly (base side) into receptacle Receptacle assembly assembly (body-side) vertically. Electrical Connection Single unit/ sub-plate: T Conduit terminal (With terminal block) If the junction cover () of the sub-plate is removed, you can see the plug-in type terminal block () (part no. N000-7A- ) mounted inside the sub-plate. The following markings are on the terminal block board. Connect with corresponding power side. Description Solenoid A side Solenoid B side Terminal block A B marking There is no polarity. When ground wiring and COM wiring are required, please specify separately. Applicable terminal:.5-,.5-s,.5y- N,.5Y-S Single unit/ sub-plate: G, E, T, D Type G: Use lead wire from solenoid to connect with power side. Type E, T, D: In the case of a DIN terminal and terminal block (with light/surge voltage suppressor), the interior wiring is shown below. Connect with corresponding power side. With DIN terminal block With terminal block () () Note) There is no polarity. Applicable terminal:.5-,.5-s,.5y-n,.5y-s, but in the case of with DIN connector board, is not a terminal structure. Tightening torque for terminal: 0.6 N m Changing Direction of DIN Terminal/Cable Entry Change of the electrical entry of DIN type connector cable Unscrew retaining screw, pull off outer cover, rotate connector board through 80. Replace cover and tighten screw. Applicable cable: O.D. ø6 to ø Manual position

5 Series S000/000/000/4000/5000/ Caution Base Mounted Light/Surge Voltage Suppressor, Electrical Entry Series S000/4000/5000/6000 Single unit Light/Surge Voltage Suppressor In the case of surge voltage suppressor, surge voltage absorption element is attached to terminal block on body area. Light/Surge voltage absorption element AC and 00 VDC or more SOL 4 VDC or less SOL Note) There is no polarity. How to Exchange With indicator light With indicator light Solenoid valve Loosen set screw and take solenoid valve out vertically, otherwise it may cause damage to the solenoid valve. Never remove a valve at an angle. When mounting solenoid valve onto the base, plug pin assembly (base side) into receptacle assembly (body side) vertically. Pilot valve When changing the rated voltage, electrical entry, etc., pilot valve assembly can be exchanged easily since this is plug-in type. Then, when changing the rated voltage with indicator light/surge voltage suppressor, change of indicator light/surge voltage suppressor substrate is also needed. So, order together with pilot valve assembly. DIN terminal block type Male pin terminal of DIN terminal block board of solenoid valve and wires as shown below. Connect to corresponding terminal block on the connector. DIN terminal (Wiring) There is no polarity. Single Double 4 VDC or less Single Double Ground AC and 00 VDC or more Lead Wire Connection A side B side COM Ground With indicator light With indicator light With indicator light With indicator light (With terminal) If the junction cover () of the sub-plate is removed, you can see the plug-in type terminal block () mounted inside the sub-plate. The following markings are on the terminal block. Connect with corresponding power side. Solenoid A side Solenoid B side Terminal block A B marking + + Applicable terminal: S000:.5-,.5-S,.5Y-N,.5Y-S S4000:.5-.5M,.5Y-L,.5Y-M S5000:.5-4,.5-4M S6000:.5-.5M,.5Y-L,.5-M There is no polarity. Tightening torque for terminal: 0.6 N m (With terminal) Remove cover (), over terminal block () attached to the inside of body. Connect with corresponding power side. For a type with indicator light and surge voltage suppressor, pull out the light and surge voltage suppressor substrate () in a straight direction and then connect them. () () () () () R S S N S000/4000/5000 Pilot cover Pilot valve assembly Light/Surge Voltage Suppressor Substrate Part No. S000 S4000 S5000 S6000 Mounting screw S6000 S000-0A A- AXT67-7A A- -: Coil rated voltage Heavy-duty cord Applicable cable O. D.: ø8 to ø0 Applicable terminal Applicable terminal on block board: (kinds).5y-l,.5-.5s,.5-4m Connector/Clamping torque Set screw 0.6 N m Terminal screw 0.6 N m Incorrect common (DIN terminal no. ) causes damage on power side circuit. A side A side A side B side B side B side Applicable terminal: S000:.5-,.5-S,.5Y-N,.5Y-S S4000/5000/6000:.5-.5M,.5Y-L,.5Y-M There is no polarity. Tightening torque for terminal: 0.6 N m -8-5

6 Series S000/000/000/4000/5000/ A lot of carbon powder and oil waste from air sources (mostly from compressor) entering into the valve sometimes can lead to increased sliding resistance at the switching spool and cause valve malfunction. In the worst case, spool can adhere to the valve. Therefore, supply air should be kept clean. Also, if it is left for a long time exposed to an inferior quality of air under SUP pressure applied, carbon powders and oil wastes in the compressed air will be accumulated in the clearance of the spool and sleeve and can cause the spool to adhere to the valve. The remedy for this case is to check the compressor lubrication oil and find out the least oxidizing compressor lubrication oil. Meanwhile, a high filtration Mist Separator (Series AM) installed on the back of regular filter (Series AF) can prevent foreign particles from entering into the valve. Besides, as lubricant for compressors, Faircoal A-80 (Nippon Mitsubishi Oil Corp.), Dafney CS55, CS49 (Idemitsu Kosan Co., Ltd), etc. are commercially available on the market.. When the foreign matters from air source adhere to the spool and sleeve, disassemble the adapter plate section and end plate section (return spring insert section). Then, take out the spool and sleeve from a valve and clean them with trichlene or freon solutions. When cleaning, prevent O-rings from touching cleaning solutions.. When disassembling and reassembling, please ensure that all components are in proper positions. Prevent gaskets from slipping, and clamp bolts down equally. Use torques listed below when mounting pilot valve assemblies and solenoid valve bodies. Holding screw M Caution Maintenance Pilot Valve Assembly: SF4-- Proper tightening torque (N m) 0.45 to 0.6 Solenoid Valve Body Holding screw Proper tightening torque (N m) M 0.8 to. M4.4 to.5 M5.8 to 5 How to Calculate the Flow Rate For obtaining the flow rate, refer to page --0. Interface Regulator Specifications Interface regulator () Applicable solenoid valve series Regulating port Proof pressure Maximum operating pressure Set pressure range () Ambient and fluid temperature Port size for connection of pressure gauge Weight (kg) Effective area at supply side (mm ) () P A S at P = 0.7 MPa, P = 0.5 MPa P B Effective area at exhaust side (mm ) () S at P = 0.5 MPa A EA B EB ARBF000 ARBF050 ARBF4050 ARBF5050 S000 S000 S4000 S5000 P A B P A B P A B P.5 MPa.0 MPa 0.05 to 0.8 MPa 0. to 0.8 MPa 5 to 60 C (No freezing) M5 x / Note ) Set within the operating pressure range of solenoid valve. Note ) Synthesized effective area with solenoid valve position single type. Note ) Operate an interface regulator only by applying pressure from the P port of the base, except when using it as a reverse pressure valve. To combine a pressure center valve and the A and B port pressure reduction of an interface regulator, use the ARBF000, 4000, or 5000 model. To combine a reverse pressure valve and an interface regulator, use the ARBF000, 4000, or 5000 model. The P port pressure reduction cannot be used. When combining a double check valve and an interface regulator, use a manifold or sub-plate as a basis, and stack them in the following order; the perfect spacer the interface regulator the valve. When a closed center valve is combined with the interface regulator's A, B port regulation, note that it cannot be used for intermediate stops of a cylinder because there is leakage from relief port on the regulator. JIS P port regulation ARBF P ARBF P ARBF P A port regulation Flow Characteristics (P A) (Conditions: Inlet pressure 0.7 MPa. when position solenoid valve is mounted.) Outlet pressure (MPa) Outlet pressure (MPa) Inlet pressure 0.7 MPa Flow rate (l/min (ANR)) Inlet pressure 0.7 MPa Flow rate (l/min (ANR)) B port regulation ARBF P Outlet pressure (MPa) ARBF A Outlet pressure (MPa) Inlet pressure 0.7 MPa Inlet pressure 0.7 MPa ARBF A Outlet pressure (MPa) Inlet pressure 0.7 MPa ARBF A Flow rate (l/min (ANR)) Flow rate (l/min (ANR)) Flow rate (l/min (ANR)) Outlet pressure (MPa) Outlet pressure (MPa) -8-6 Flow rate (l/min (ANR)) Flow rate (l/min (ANR))

7 Series S000/000/000/4000/5000/ Caution How to remove junction cover (Type 0) Turn the knob () of junction cover () on the manifold block side by hand or slotted screwdriver to the C O direction (counterclockwise) 90. While holding the knob and upper part of junction cover, pull outward to remove junction cover. When reassembling, do the opposite. Wiring The insert plug () is attached to the manifold block and lead wire is plugged in with valve side as shown in the following list. Single solenoid: AXT64-5A-S- ( Double solenoid: AXT64-5A-D- Connect with corresponding power side. Power supply Valve model AC Single solenoid DC Double solenoid There is no polarity. Lead wire length is m. Lead Wire Connection Type 0 Insert Plug with Lead Wire Solenoid A Red, Black Red, Black Series S000 (Insert plug with lead wire is not available for Series 000, 4000, and 5000.) () () ( Solenoid B Brown, White How to Use Insert Plug When removing insert plug () from manifold base, push the lever area () of inset plug downward with thumb and pull it together with the lead wire () outward. () () () When placing the inset plug () into the manifold base, push the lever area of inset plug with thumb and plug it in its place in the receptacle housing (4) horizontally. After plugging, pull lead wire out a little bit to ensure that insert plug is secure. (4) () Manifold/Plug-in Type 0T with Terminal Block Model Terminal block marking S00 S00 S 4 00 Series S000 Remove junction cover of manifold, exposing terminal block attached to the manifold block. Lead wires from solenoid valve are connected with the terminals on upper side of terminal block. (On the terminal block, lead wire is connected with both A and B sides of solenoid valve in accordance with the corresponding markings A and B on the block.) Connect each lead wire of power side corresponding to respective solenoid valve on the lower terminal block. S000 has the marking + COM on the block board, but COM specification is also available. A A side A side A side COM COM COM COM B B side B side Applicable terminal:.5-,.5-s,.5y-n,.5y-s Plugging COM bridge (part no. AXT65-7: 5 stations) in between each + COM on the block board will make the specifications of all the stations + COM and enables you to understand the wiring process. There is no polarity. Tightening torque for terminal: 0.6 N m Connection Marking R S S N () Model Terminal block marking A A side A side A side COM COM COM COM S00 S00 B side S 4 00 B side Applicable terminal:.5-.5m,.5y-l,.5-m There is no polarity. S 000 has the marking + COM on the block board, but COM specification is also available. Tightening torque for terminal: 0.6 N m Model Terminal block marking 4 S S 5 00 S S Series S000 Series S4000/5000 A + A side A side A side A A side A side B + Applicable terminal:.5-.5m,.5y-l,.5y-m There is no polarity. Tightening torque for terminal: 0.6 N m B B B side B side A side B side B side -8-7

8 Series S000/000/000/4000/5000/ Caution Type 0C Circular Connector Series R000/000/4000/5000 Lead Wire Connection Wire connection specifications Lead wire for both solenoid A and B sides in manifold are connected to connector terminal as COM specifications. (n) () Fig. () () () Station Type 0F D-sub Connector Manifold/Plug-in Series R000/000/4000/5000 Wire connection specifications Lead wire for both solenoid A and B sides in manifold are connected to connector terminal as COM specifications. (n) () Fig. () () () Station Applicable plug assembly (Option) Applicable plug assembly (Option) Internal Wiring of Manifold Internal Wiring of Manifold Standard Wiring with control unit Standard Wiring with control unit Connector terminal Connector terminal Multi-connector station station Control unit Air release valve station station Pressure switch D-sub connector Connector terminal no. Connector terminal station station Control unit Connector terminal Air release valve station Pressure switch station station station station station 4 station 4 station 4 station 4 station Connector terminal no. 5 station 5 station 5 station 5 station 6 station 6 station 6 station 6 station 7 station 7 station 7 station 7 station Max. 8 stations Max. 8 stations Max. 8 stations Max. 8 stations Note ) Maximum stations are 8. Note ) There is no polarity. Note ) Indication of stations are one station from regardless of the connector mounting side, D or U. Applicable Plug Assembly (Option) Assembly part no. VS000-0A- VS000-0A- VS000-0A- VS000-0A-4 VS000-0A-5 VS000-0A-6 VS000-0A-7 Cable length.5 m m 5 m 7 m 0 m 5 m 0 m Cable Color List of Each Terminal No. Terminal no. Lead wire color Dot marking Terminal no. Lead wire color Dot marking Orange Orange Black 4 5 Black Component parts Plug pc. Cable clamp 068- pc. Socket pcs. Cable VCTF 4 cores x 0.75 mm made by Tyco Electronics AMP K.K. 6 7 Green Green Red Red Blue Blue Yellow Yellow 8 9 Yes Yes Yes Yes Yes Yes Brown Brown White White Pink Pink Gray Gray Unused Unused Light green Light green Yes Yes Yes Yes Yes Yes Note ) Maximum stations are 8. Note ) There is no polarity. Note ) Indication of stations are one station from regardless of the connector mounting side, D or U. Applicable Plug Assembly (Option) Assembly part no. VS000-A- VS000-A- VS000-A- VS000-A-4 VS000-A-5 VS000-A-6 VS000-A-7 VS000-A-8 Cable Color List of Each Terminal No. Terminal no. Lead wire color Black Brown Dot marking Red Cable length.5 m m 5 m 8 m 0 m 5 m 0 m 0 m Orange Yellow Pink Blue Purple Gray White White Yellow Orange 7 Component parts Plug: ML standard D type connector 5 terminals Cable: 5 core wire, 0. mm White Black Black Red Red Red Terminal no Lead wire color Yellow Pink Blue Purple Gray Orange Red Brown Pink Gray Black White Dot marking Black Black White Black White White Red Red White -8-8

9 For details about certified products conforming to international standards, visit us at Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 Model position position Type of actuation Single Double Closed center Exhaust center Pressure S50 S center Note ) Based on JIS B 875 (once per 0 days) for the minimum operating frequency. Note ) According to JIS B (The value at supply pressure 0.5 MPa.) Note ) In the case of grommet type Note 4) Note ) and Note ) are with controlled clean air. Compact yet provides a large flow capacity C:.8 dm /(s bar) Low power consumption:.8 W DC S0-D-0 S0-E-0 Plug-in S0 S0 S0 S40 Model Non plug-in S0-G-0-F S0-G-0 JIS position position Single Closed center Double S0 8.7 S0 S0 S40 Exhaust center Port size Flow characteristics 4/ (P A/B) 4/ 5/ (A/B R/R) C C [dm /(s bar)] b Cv [dm /(s bar)] b Cv Standard Specifications Valve specifications Electricity specifications Option Specifications Fluid Maximum operating pressure position Min. operating pressure position Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power Inrush AC (Power consumption) Holding Power consumption (DC) Electrical entry Max. operating cycle (cpm) Response time (ms) 5 or less or less 0 or less 0 or less 0 or less Weight (kg) Air/Inert gas.0 MPa 0. MPa 0.5 MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Dustproof (Degrees of protection 0) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA (50 Hz), 5.0 VA (60 Hz).4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Grommet, Grommet terminal, Conduit terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Pilot valve manual override Coil rated voltage Option Foot bracket (With screw) Non-locking push type (Extended), Locking type (Tool required), Locking type (Lever) 0 to 0, 0, 40 VAC (50/60 Hz), 00 VDC With light/surge voltage suppressor Note) Part No.: AXT66-0A, S0 (single) only Note) Grommet type is available only w/ surge voltage suppressor (which is directly connected with lead wire). () () () R S S N Pressure center Manifold Body type S0 S0 Applicable manifold base (Pilot EXH) Bar manifold (Individual EXH) Bar manifold (Common EXH base side) Note) S0: Manifold only. Cannot be used as a single unit. -8-9

10 Series S000 0 S 0 G 0 position single position double position closed center How to Order Port size 0 8 Manual override Nil: Non-locking push type (Flush) Thread type Nil N T F A : Non-locking push type (Extended) NPT NPTF G B : Locking type Option F: With foot bracket Mountable only for S0. C : Locking type (Lever) position exhaust center 4 5 position pressure center Body (Pilot exhaust) 0: Individual EXH Light/Surge voltage suppressor Nil None Z With light/surge voltage suppressor S With surge voltage suppressor Electrical entry Indicator light is not available for grommet type. With surge voltage suppressor is available for grommet type only. G: Grommet E: Grommet terminal T: Conduit terminal D, Y: DIN terminal 0 : Common EXH Manifold only Coil rated voltage 00 VAC (50/60 Hz) 00 VAC (50/60 Hz) 0 to 0 VAC (50/60 Hz) 4 0 VAC (50/60 Hz) 5 4 VDC 6 VDC 7 40 VAC (50/60 Hz) 9 Other How to Order Pilot Valve Assembly Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC (50/60 Hz) 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz 9 Other SF4 DZ Electrical entry, Light/Surge voltage suppressor G Grommet GS Grommet with surge voltage suppressor D DIN terminal DZ DIN terminal with light/surge voltage suppressor DO DIN terminal DOZ DIN terminal with light/surge voltage suppressor Y DIN terminal YZ DIN terminal with light/surge voltage suppressor YO DIN terminal YOZ DIN terminal with light/surge voltage suppressor T Conduit terminal TZ Conduit terminal with light/surge voltage suppressor E EZ Grommet terminal Grommet terminal with light/surge voltage suppressor Y: Conforming to DIN4650B standard DIN connector is not attached. Applicable model For S0 For S0 Individual pilot exhaust Common pilot exhaust Manual override Nil A Non-locking push type (Flush) Non-locking push type (Extended) B Locking type (Tool required) C Locking type (Lever) -8-0

11 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 Cylinder Speed Chart Body Ported Series S0-0 Conditions Construction Average speed (mm/s) Bore size Series CJ Pressure 0.5 MPa Load factor 50% Stroke 60 mm Series CM Pressure 0.5 MPa Load factor 50% Stroke 00 mm Series MB/CA Pressure 0.5 MPa Load factor 50% Stroke 500 mm ø6 ø0 ø6 ø0 ø5 ø ø40 ø40 ø50 ø6 ø80 ø00 Body ported Series CJ Series CM Series MB/CA Tube bore x Length T0604 x m T0806 x m S0-0 Speed controller Silencer AS00F-06 AS00F-08 AN0-0 position single position double Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Perpendicular, upward actuation Horizontal actuation It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% R S S N Closed center position closed center/exhaust center/pressure center Exhaust center Pressure center Component Parts No. Description q Body w Spool/Sleeve e End plate r Piston Material Aluminum die-casted Stainless steel Resin Resin Note Platinum silver Replacement Parts No. Description Material t Return spring Stainless steel y Pilot valve assembly u Detent assembly Part no. S0 S0 S0/40/50 AXT66-6 AXT66-9 Refer to How to Order Pilot Valve Assembly on page AXT64-A -8-

12 Series S000 Position Single Grommet: S0-G Grommet, Grommet terminal, Conduit terminal, DIN terminal Manual override Non-locking push type -ø4.5 mounting hole Foot bracket (F) Part no.: AXT66-0A -ø4.5 mounting hole Solenoid valve 00 (Lead wire length) Manual override (Locking type) -ø.5 mounting hole Pilot EXH (No S0) 5- /8 M x 0.5 x 4L Countersunk head screw Tightening torque: 0.6 N m Grommet terminal: S0-E/EZ DIN terminal: S0-D/DZ/Y/YZ Lead wire O.D. Max. ø.5 With light/surge voltage suppressor (EZ) Light Manual override (Locking type) Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) With light/surge voltage suppressor (DZ) Light Manual override (Locking type) Conduit terminal: S0-T/TZ ( ): Y, YZ Applicable heavy-duty code O.D. ø6 to ø8 With light/surge voltage suppressor (TZ) Light Manual override (Locking type) -8-

13 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 Position Double, Position Grommet, Grommet terminal, Conduit terminal, DIN terminal Grommet: S0-G, S0-G, S40-G, S50-G -ø4.5 mounting hole Manual override Non-locking push type 00 (Lead wire length) Manual override (Locking type) 5 ( position: 55.5) -ø.5 mounting hole R Pilot EXH (No S0) Grommet terminal: S0-E/EZ S0-E/EZ S40-E/EZ S50-E/EZ Lead wire O.D. Max. ø.5 5 ( position: 56.5) DIN terminal : S0-D/DZ/Y/YZ S0-D/DZ/Y/YZ S40-D/DZ/Y/YZ S50-D/DZ/Y/YZ S S N With light/surge voltage suppressor (EZ) Light Manual override (Locking type) Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) 88 ( position: 9.5) With light/surge voltage suppressor (DZ) Light Conduit terminal: S0-T/TZ S0-T/TZ S40-T/TZ S50-T/TZ Manual override (Locking type) Applicable heavy-duty cord O.D. ø6 to ø8 88 ( position: 9.5) ( ): Y, YZ With light/surge voltage suppressor (TZ) Light Manual override (Locking type) -8-

14 Series S000 Manifold Specifications Single Base Type 4 Compact and lightweight Compact due to manifolding on a single base for mounting in small spaces. Keeps environmental air clean from pilot exhaust Use of the VV5FS-0 manifold can exhaust intensively the pilot exhaust gas to the base side, and can prevent environmental aggravation due to noise and oil mist. Specifications Manifold base type Port Specifications (P) Common Passage 5(R), (R) Common Bar manifold, Body ported Max. 5 stations Porting specifications: (Connecting port size) Base (P) Side/ /8 Valve 4(A), (B) Top/ /8 Base 5(R), (R) Side/ /8 Option Blanking plate VS000-0A- With gasket, screw VV5FS-0 How to Order Manifold Base VV5FS Series S000 Manifold stations 5 5 stations P, EA, EB port size 0 /8 Thread type Nil N NPT T NPTF F G Passage Porting specifications (P) (R), 5(R) (B), 4(A) Common Common Top VV5FS-0 Base model Model Pilot exhaust Pilot individual EXH Applicable valve model Part no. for mounting bolt and gasket BG-S00 0 S0--0 Pilot common EXH 0 S0--0 S0--0 mountable How to Order Manifold Assembly Instruct by specifying the valves and blanking plate to be mounted on the manifold along with the manifold base model no. <Examble> (Manifold base) ( position single) ( position double) (Blanking plate) VV5FS S0-D-0 S0-D-0 VS000-0A- -8-4

15 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 5 Type 0 Manifold Grommet: G Pilot individual exhaust: VV5FS-0- Station -0 P = 4 Manual override 4-ø5. mounting hole Gasket AXT65-5 position Double Single Blanking plate Pilot EXH Formula for manifold weight M = 0.049n (kg) n: Station Grommet terminal: E/EZ Conduit terminal: T/TZ DIN terminal: D/DZ/Y/YZ 00 (Lead wire length) R S S N Lead wire O.D. Max. Ø.5 Applicable heavy-duty cord O.D. ø6 to ø8 Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) position (56.5) Double (5) Single (0.5) 6- /8 position (9.5) Double (88) Single (.5) 6- /8 position (9.5) Double (88) Single (.5) 6- /8 (With light/surge voltage suppressor: 8.5) (With light/surge voltage suppressor: 9.5) (With light/surge voltage suppressor: 86.5) (With light/surge voltage suppressor: 96.5) (With light/surge voltage suppressor: 97.5 (99.5)) (With light/surge voltage suppressor: 06.5 (08.5)) ( ): Y, YZ n: Station L L Formula L = 4 x n + L = 4 x n

16 Series S000 6 Type 0 Manifold Grommet: G Pilot common exhaust: VV5FS-0- Station -0 P = 4 Manual override n- /8 4-ø5. mounting hole position Double Single Blanking plate VS000-0A- M4 x 6 AXT (Lead wire length) 6- /8 Pilot EXH port Gasket Formula for manifold weight M = 0.079n (kg) n: Station Grommet terminal: E/EZ Conduit terminal: T/TZ DIN terminal: D/DZ/Y/YZ Lead wire O.D. Max. ø.5 Applicable heavy-duty code O.D. ø6 to ø8 Applicable heavy-duty code O.D. ø6 to ø8 (Y: ø4.7 to ø7) position (56.5) Double (5) Single (0.5) Pilot EXH port 6- /8 position (9.5) Double (88) Single (.5) Pilot EXH port 6- /8 position (9.5) Double (87) Single () Pilot EXH port 6- /8 (With light/surge voltage suppressor: 87.5) (With light/surge voltage suppressor: 96.5) (With light/surge voltage suppressor: 9.5) (With light/surge voltage suppressor: 0.5) (With light/surge voltage suppressor: 0.5 (04.5)) (With light/surge voltage suppressor:.5 (.5)) ( ): Y, YZ L L Formula L = 4 x n + L = 4 x n + 9 n: Station -8-6

17 For details about certified products conforming to international standards, visit us at Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 Model position position Type of actuation Single Double Closed center Exhaust center Pressure center Plug-in S0 S0 S0 S40 S50 Model Non plug-in S0 S0 S0 S40 S50 Port size Flow characteristics 4/ (P A/B) 4/ 5/ (A/B R/R) C C [dm /(s bar)] b Cv [dm /(s bar)] b Cv Note ) Based on JIS B 875 (once per 0 days) for the minimum operating frequency. Note ) According to JIS B (The value at supply pressure 0.5 MPa.) Note ) In the case of grommet type Note 4) Factors of Note ) and Note ) are achieved in controlled clean air. Compact yet provides a high flow capacity /4: C:.4 dm /(s bar) Low power consumption:.8 W DC S0-T-0 S0-E-0 JIS position position Single Closed center Double S0-E-0-F S0-G-0 Exhaust center Standard Specifications Valve specifications Electricity specifications Option Specifications Fluid Maximum operating pressure Minimum operating pressure Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power Inrush (Power consumption) AC Holding Power consumption Electrical entry Max. operating cycle (cpm) () () () Response time (ms) or less or less 40 or less 40 or less 40 or less Air/Inert gas.0 MPa 0. MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Dustproof (Degrees of protection 0) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA (50 Hz), 5.0 VA (60 Hz).4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Grommet, Grommet terminal, Conduit terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Pilot type External pilot () Pilot valve manual override Non-locking push type (Extended), Locking type (Tool required) 0 to 0, 0, 40 VAC (50/60 Hz) Coil rated voltage, 00 VDC Option With light/surge voltage suppressor () Foot bracket (With screw) Part no.: N00-7A, S0 (single) only Note ) Operating pressure: 0 to.0 MPa. Pilot pressure: 0. to.0 MPa. Note ) No light grommet but surge voltage suppressor (direct connecting lead wire) is installed. Weight (kg) R S S N Pressure center Manifold Body type S0 S0 Applicable manifold base (Pilot EXH) Bar manifold (Individual EXH) Bar manifold (Common EXH base side) Note) S0: Manifold only. Cannot be used as a single unit. -8-7

18 Series S000 8 How to Order S position single position double 0 G 0 Nil Port size N 0 8 T 0 4 F Thread type NPT NPTF G Option F: With foot bracket position closed center Manual override Nil: Non-locking push type (Flush) A : Non-locking push type (Extended) B : Locking type (Tool required) Mountable only for S0. position exhaust center 4 5 position pressure center Reverse pressure: Can be used by external pilot specifications. Body (Pilot exhaust) 0: Individual EXH Light/Surge voltage suppressor Nil None Z With light/surge voltage suppressor S With surge voltage suppressor Indicator light is not available for grommet type. With surge voltage suppressor is available for grommet type only. Electrical entry G: Grommet E: Grommet terminal T: Conduit terminal D, Y: DIN terminal 0: Common EXH How to Order Pilot Valve Assembly Manifold only Pilot type Nil Internal pilot R External pilot : Individual external pilot (External pilot port: Body side) SF4 Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC (50/60 Hz) 0 VAC, 50/60 Hz 4 VDC VDC 40 VAC, 50/60 Hz Other DZ Electrical entry, Light/Surge voltage suppressor G GS D DZ DO DOZ Y YZ YO YOZ T TZ E EZ Coil rated voltage 00 VAC (50/60 Hz) 00 VAC (50/60 Hz) 0 to 0 VAC (50/60 Hz) 4 0 VAC (50/60 Hz) 5 4 VDC 6 VDC 7 40 VAC (50/60 Hz) 9 Other Grommet Grommet with surge voltage suppressor DIN terminal DIN terminal with light/surge voltage suppressor DIN terminal DIN terminal with light/surge voltage suppressor DIN terminal DIN terminal with light/surge voltage suppressor DIN terminal DIN terminal with light/surge voltage suppressor Conduit terminal Conduit terminal with light/surge voltage suppressor Grommet terminal Grommet terminal with light/surge voltage suppressor Y: Conforming to DIN4650B standard DIN connector is not attached. Applicable model For S0 For S0 Manual override Individual pilot exhaust Common pilot exhaust Nil A Non-locking push type (Flush) Non-locking push type (Extended) B Locking type (Tool required) -8-8

19 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 9 Cylinder Speed Chart Body Ported Series S0-0 Conditions Construction Averag speed (mm/s) Bore size Series CJ Pressure 0.5 MPa Load factor 50% Stroke 60 mm Series CM Pressure 0.5 MPa Load factor 50% Stroke 00 mm Series MB/CA Note) Pressure 0.5 MPa Load factor 50% Stroke 500 mm ø6 ø0 ø6 ø0 ø5 ø ø40 ø40 ø50 ø6 ø80 ø00 Body ported Series CJ Series CM Series MB/CA Note) S0-0 Tube bore x Length Speed controller Silencer T0604 x m AS00F-06 T075 x m AS400F-0 AN0-0 Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% Note) The Series CA has been changed to the Series CA. position single position double Perpendicular, upward actuation Horizontal actuation R S S N Closed center position closed center/exhaust center/pressure center Exhaust center Pressure center Component Parts No. Description q Body w Spool/Sleeve e End plate r Piston Material Aluminum die-casted Stainless steel Resin Resin Note Platinum silver Replacement Parts No. Description Material t Return spring Stainless steel y Pilot valve assembly u Detent assembly Part no. S0 S0 S0/40/50 S S Refer to How to Order Pilot Valve Assembly on page N000-8A -8-9

20 Series S000 0 Position Single Grommet: S0-G Grommet, Grommet terminal, Conduit terminal, DIN terminal Foot bracket (F) Part no.: N00-7A Manual override (Non-locking) -ø.5 mounting hole M5: External pilot port ( Only for external pilot model. ) -ø4.5 mounting hole Solenoid valve 00 (Lead wire length) -ø.5 mounting hole - /8, /4 - /8 Grommet terminal: S0-E/EZ DIN terminal: S0-D/DZ/Y/YZ Lead wire O.D. Max. ø.5 With light/surge voltage suppressor (EZ) Light Applicable heavy-duty code O.D. ø6 to ø8 (Y: ø4.7 to ø7) With light/surge voltage suppressor (DZ) Light -ø.5 mounting hole Conduit terminal: S0-T/TZ Applicable heavy-duty code O.D. ø6 to ø8 With light/surge voltage suppressor (TZ) -ø.5 mounting hole Light ( ): Y, YZ -ø.5 mounting hole -8-0

21 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 Position Double, Position Grommet, Grommet terminal, Conduit terminal, DIN terminal Grommet: S0-G, S0-G, S40-G, S50-G 8 ( position: 9.5) Manual override (Non-locking) -ø.5 mounting hole 00 (Lead wire length) Grommet terminal:s0-e/ez S0-E/EZ S40-E/EZ S50-E/EZ Lead wire O.D. Max. ø.5 With light/surge voltage suppressor (EZ) 8 ( position: 9) (M5: External pilot port Only for external pilot model.) -ø.5 mounting hole - /8, /4 - /8 DIN terminal: S0-D/DZ/Y/YZ S0-D/DZ/Y/YZ S40-D/DZ/Y/YZ S50-D/DZ/Y/YZ R S S N Light Applicable heavy-duty code O.D. ø6 to ø8 (Y: ø4.7 to ø7) With light/surge voltage suppressor (DZ) 9 ( position: 9) Light -ø.5 mounting hole Conduit terminal:s0-t/tz S0-T/TZ S40-T/TZ S50-T/TZ -ø.5 mounting hole ( ): Y, YZ Applicable heavy-duty code O.D. ø6 to ø8 With light/surge voltage suppressor (TZ) 9 ( position: 9) Light -ø.5 mounting hole -8-

22 Series S000 Manifold Specifications Single Base Type Keeps environmental air clean from pilot exhaust Use of the VV5FS-0 manifold can exhaust side, and can prevent environmental aggravation due to noise and oil mist. Specifications Manifold base type Port Specifications (P) Common Passage 5(R), (R) Common Bar manifold, Body ported Max. 5 stations Porting specifications: Base Valve Base (P) Side: 8 (B), 4(A) Top: 8, 4 (R), 5(R) Side: 8 Option Blanking plate VS000-0A- With gasket, screw VV5FS-0 How to Order Manifold Base VV5FS Series S000 Manifold Thread type Nil N NPT T NPTF F G VV5FS-0 0 stations 5 5 stations P, EA, EB port size 0 8 Passage (P) (R), 5(R) Common Common 8 8 Porting specifications (B), 4(A) Top 8, 4 Part no. for mounting bolt and gasket BG-S00 Base model Model Pilot exhaust Pilot individual EXH Applicable valve model 0 S Pilot common EXH How to Order Manifold Assembly Instruct by specifying the valves and blanking plate to be mounted on the manifold along with the manifold base model no. 0 S S mountable <Examble> (Manifold base) ( position single) ( position double) (Blanking plate) VV5FS S0-D-0 S0-D-0 VS000-0A- -8-

23 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 Type 0 Manifold Grommet: G Pilot individual exhaust: VV5FS-0- Station -0 n- /8, /4 M x /8 R 4-ø5 mounting hole Pilot EXH P = 5 Blanking plate 00 (Lead wire length) S S Gasket Formula for manifold weight M = 0.08n (kg) n: Station N Grommet terminal: E/EZ Conduit terminal: T/TZ DIN terminal: D/DZ Lead wire O.D. Max. ø.5 Applicable heavy-duty code O.D. ø6 to ø8 Applicable heavy-duty code O.D. ø6 to ø8 (Y: ø4.7 to ø7) 6- /8 6- /8 6- /8 position (9) Double (8) Single (5) position (9) Double (9) Single (4) position (9) Double (9) Single (4.5) (With light/surge voltage suppressor: 9.5) (With light/surge voltage suppressor: 0) (With light/surge voltage suppressor: 96) (With light/surge voltage suppressor: 06) (With light/surge voltage suppressor: 08.5 (0.5)) (With light/surge voltage suppressor: 7.5 (9.5)) ( ): Y, YZ L L L Formula L = 5 x n + 8 L = 5 x n + 8 n: Station -8-

24 Series S000 4 Type 0 Manifold Grommet: G Pilot common exhaust: VV5FS-0- Station -0 M x 44 n- /8, /4 4-ø5 mounting hole 6- /8 4-M5 (Pilot EXH port) P = 5 Blanking plate 00 (Lead wire length) Gasket Formula for manifold weight M = 0.n + 0. (kg) n: Station Grommet terminal: E/EZ Conduit terminal: T/TZ DIN terminal: D/DZ/Y/YZ Lead wire O.D. Max. ø.5 Applicable heavy-duty code O.D. ø6 to ø8 Applicable heavy-duty code O.D. ø6 to ø8 (Y: ø4.7 to ø7) position (9) Double (8) Single (5) 6- /8 position (9) Double (9) Single (4) 6- /8 position (9) Double (9) Single (4.5) 6- /8 (With light/surge voltage suppressor: 98) (With light/surge voltage suppressor: 07.5) (With light/surge voltage suppressor: 0.5) (With light/surge voltage suppressor:.5) (With light/surge voltage suppressor: 5 (7)) (With light/surge voltage suppressor: 4 (6)) ( ): Y, YZ L L L Formula L = 5 x n + L = 5 x n + 4 n: Station -8-4

25 For details about certified products conforming to international standards, visit us at Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 Model position position Type of actuation Single Double Closed center Exhaust center Pressure center Plug-in S0 S0 S0 S40 S50 Model Non plug-in S0 S0 S0 S40 S50 Compact yet provides a large flow capacity /8: C: 6.8 dm /(s bar) Low power consumption:.8 W DC JIS position position Single Closed center Port size C [dm /(s bar)] Standard Specifications Option Specifications Manifold Flow characteristics 4/ (P A/B) 4/ 5/ (A/B R/R) b C [dm /(s bar)] or less 5 or less 40 or less 40 or less 40 or less Note ) Based on JIS B 875 (once per 0 days) for the minimum operating frequency. Note ) In the case of grommet type. Note ) Based on JIS B (The value at supply pressure 0.5 MPa.) Note 4) Factors of Note) and Note ) are achieved in controlled clean air. Double S0-E-0 S0-T-0 Exhaust center Pressure center S0-E-0-F S0-G-0 Valve specifications Electricity specifications Cv Fluid Maximum operating pressure Minimun operating pressure Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power Inrush (Power consumption) AC Holding Power consumption Electrical entry b Cv Air/Inert gas.0 MPa 0. MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Dustproof (Degrees of protection 0) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA/50 Hz, 5.0 VA/60 Hz.4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Grommet, Grommet terminal, Conduit terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Pilot type External pilot () Pilot valve manual override Non-locking push type (Extended), Locking type (Tool reguired) 0 to 0, 0, 40 VAC (50/60 Hz) Coil rated voltage, 00 VDC Option With light/surge voltage suppressor () Foot bracket (With screw) Part no.: S000-5A, S0 (single) only Note ) Operating pressure: 0 to.0 MPa Pilot pressure: 0. to.0 MPa Body type S0 S0 Applicable manifold base Stacking manifold Max. operating cycle (cpm) Response time (ms) Note ) Grommet type is available only w/ surge voltage suppressor (which is directly connected with lead wire), not w/ indicator light. Pilot EXH Individual EXH (Valve side) Common EXH (Manifold base side) () () () Weight (kg) R S S N -8-5

26 Series S000 6 How to Order 4 S 0 G 0 position single position double position closed center position exhaust center Port size Manual override Nil: Non-locking push type (Flush) Thread type Nil N NPT T NPTF F G A : Non-locking push type (Extended) B : Locking type (Tool required) Option F: With foot bracket Mountable only for S0. 5 position pressure center Reverse pressure: Can be used by external pilot specifications. Body (Pilot exhaust) 0: Individual EXH Light/Surge voltage suppressor Nil None Z With light/surge voltage suppressor S With surge voltage suppressor Indicator light is not available for grommet type. W/ surge voltage suppressor is available for grommet type only. Electrical entry G: Grommet E: Grommet terminal T: Conduit terminal D-Y: DIN terminal 0 : Common EXH Coil rated voltage 00 VAC (50/60 Hz) 00 VAC (50/60 Hz) 0 to 0 VAC (50/60 Hz) Manifold only 4 0 VAC (50/60 Hz) Pilot type 5 4 VDC Nil Internal pilot 6 VDC R External pilot 7 40 VAC (50/60 Hz). It will be 9 Other an individual external pilot. External pilot port: Body side. For 0 type, common external pilot (on manifold side). How to Order Pilot Valve Assembly SF4 Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC (50/60 Hz) 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz 9 Other -8-6 DZ Electrical entry, Light/Surge voltage suppressor G Grommet GS Grommet with surge voltage suppressor D DIN terminal DZ DIN terminal with light/surge voltage suppressor DO DIN terminal DOZ DIN terminal with light/surge voltage suppressor Y DIN terminal YZ DIN terminal with light/surge voltage suppressor YO DIN terminal YOZ DIN terminal with light/surge voltage suppressor T Conduit terminal TZ Conduit terminal with light/surge voltage suppressor E Grommet terminal EZ Grommet terminal with light/surge voltage suppressor Y: Conforming to DIN4650B standard DIN connector is not attached. Manual override Applicable model A side pilot operator for S B side pilot operator for S0 4 B side pilot operator for S 5 0 A side pilot operator for S B side pilot operator for S0 B side pilot operator for S Nil Non-locking push type (Flush) A Non-locking push type (Extended) B Locking type (Tool required) C Locking type (Lever) Individual pilot exhaust Common pilot exhaust

27 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 7 Cylinder Speed Chart Body Ported Series S0-0 Conditions Average speed (mm/s) Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CJ Pressure 0.5 MPa Load factor 50% Stroke 60 mm Series CM Pressure 0.5 MPa Load factor 50% Stroke 00 mm Series MB Pressure 0.5 MPa Load factor 50% Stroke 500 mm Series CS Pressure 0.5 MPa Load factor 50% Cylinder stroke 000 mm ø6 ø0 ø6 ø0 ø5 ø ø40 ø40 ø50 ø6 ø80 ø00 ø5 ø40 ø60 It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% Body ported Series CJ Series CM Tube bore x Length T0604 x m T075 x m S0-0 Speed controller AS00F-06 AS400F-0 Silencer AN00-0 Series MB Series CS T09 x m AS400F- AN0-0 Perpendicular, upward actuation Horizontal actuation R S S N -8-7

28 Series S000 8 Construction position position double Closed center position closed center/exhaust center/pressure center Exhaust center Pressure center Component Parts No. q w e r Replacement Parts No. Description Body Spool/Sleeve End plate Piston Description Material Aluminum die-casted Stainless steel Resin Resin Material t Return spring Stainless steel y Pilot valve assembly u Detent assembly Note Platinum silver Black Part no. S0 S0 S0/40/50 S S Refer to How to Order Pilot Valve Assembly on page S000-9A -8-8

29 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series S000 9 Position Single Grommet: S0-G Grommet, Grommet terminal, Conduit terminal, DIN terminal Foot bracket (F) Part no.: S000-5A Manual override (Non-locking) -ø4. mounting hole 00 (Lead wire length) M5: External pilot port (For external pilot model) -ø6 mounting hole Solenoid valve R S -ø4. mounting hole S - /4, /8 - /4 Grommet terminal: S0-E/EZ DIN terminal: S0-D/DZ/Y/YZ N With light/surge voltage suppressor (EZ) Lead wire O.D. Max. ø.5 Light Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) With light/surge voltage suppressor (DZ) Light -ø4. mounting hole Conduit terminal: S0-T/TZ -ø4. mounting hole Applicable heavy-duty cord O.D. ø6 to ø8 With light/surge voltage suppressor (TZ) Light ( ): Y, YZ -ø4. mounting hole -8-9

30 Series S000 0 Position Double, Position Grommet, Grommet terminal, Conduit terminal, DIN terminal Grommet: S0-G, S0-G, S40-G, S50-G 94 ( position: 04) Manual override (Non-locking) -ø4. mounting hole M5: External pilot port (For external pilot model) 00 (Lead wire length) -ø4. mounting hole - /4, /8 - /4 Grommet terminal: S0-E/EZ S0-E/EZ S40-E/EZ S50-E/EZ Lead wire O.D. Max. ø.5 94 ( position: 04) DIN terminal: S0-D/DZ/Y/YZ S0-D/DZ/Y/YZ S40-D/DZ/Y/YZ S50-D/DZ/Y/YZ With light/surge voltage suppressor (EZ) Light Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) ( position: 4) With light/surge voltage suppressor (DZ) Light -ø4. mounting hole Conduit terminal: S0-T/TZ S0-T/TZ S40-T/TZ S50-T/TZ -ø4. mounting hole Applicable heavy-duty cord O.D. ø6 to ø8 ( position: 4) With light/surge voltage suppressor (TZ) ( ): Y, YZ Light -ø4. mounting hole -8-0

31 Series S000 Manifold Specifications Stacking Type Keeps environmental air clean from pilot exhaust Use of the VV5FS- manifold can exhaust intensively the pilot exhaust gas to the base side, and can prevent environmental aggravation due to noise and oil mist. VV5FS- Part no. for mounting bolt and gasket BG-S00 Exploded View of Manifold Manifold block assembly VS000-A-0 Hexagon socket head cap screw: M4 x 5 (AXT5-7-) Specifications Port Specifications Option Manifold base type (P) Common Passage (R), 5(R) Common How to Order Manifold Base Stacking type Max. 5 stations Porting specifications: Base Valve Base (P) Side: 8 (B), 4(A) Top:, 4 8 (R), 5(R) Side: 8 Blanking plate VS000-0A- With gasket, screw SUP block disk AXT66-0A EXH block disk AXT66-A Note) Individual SUP or EXH is possible with bottom porting of SUP or EXH. For your order, please indicate it in the manifold specification sheet. VV5FS Series S000 Manifold stations 5 5 stations Thread type Nil N NPT T NPTF F G P, EA, EB port size 0-8 Passage Porting specifications (P) (R), 5(R) (B), 4(A) Common Common Top 8 8, 4 8 R S S N Gasket Base model Model Pilot exhaust Pilot common EXH Applicable valve model Type 0 Type 0 S S Note) Also S0 is possible to manifold. In this case, it uses an individual pilot exhaust. For increasing the manifold bases, please prepare the manifold block assembly no. How to Order Manifold Assembly Instruct by specifying the valves and blanking plate to be mounted on the manifold along with the manifold base model no. <Example> (Manifold base) ( position single) ( position double) (Blanking plate) VV5FS S0-D-0 S0-D-0 VS000-0A- -8-

32 Series S000 Type Manifold Grommet: G Pilot common exhaust: VV5FS-- Station -0 n- /4, /8 M4 x 5 /8 External pilot port 6- /8 4-ø7 mounting hole P = Blanking plate 4- /8 Pilot EXH port: PE 00 (Lead wire length) Gasket Formula for manifold weight M = 0.84n (kg) n: Station Grommet terminal: E/EZ Conduit terminal: T/TZ DIN terminal: D/DZ/Y/YZ Lead wire O.D. Max. ø.5 Applicable heavy-duty cord O.D. ø6 to ø8 Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) position (04) Double (94) Single (5) position (4) Double () Single (5) position (40) Double (0) Single (5) 4- /8 Pilot EXH port: PE (With light/surge voltage suppressor: 04.5) 6- /8 6- /8 4- /8 Pilot EXH port: PE (With light/surge voltage suppressor: 09) 6- /8 4- /8 Pilot EXH port: PE (With light/surge voltage suppressor: 9.5 (.5)) L (With light/surge voltage suppressor: 4) L L (With light/surge voltage suppressor: 9) (With light/surge voltage suppressor: 8.5 (0.5)) ( ): Y, YZ n: Station Formula L = x n + 5 L = x n

33 For details about certified products conforming to international standards, visit us at 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 Model position position Type of actuation Single Double Closed center Exhaust center Pressure center Double check Plug-in S00 S00 S00 S400 S500 S600 Note ) Based on JIS B 875 (Once per 0 days) for the minimum operating frequency. Note ) Based on JIS B (The value at supply press. 0.5 MPa). Note ) Values for S00-FZ-0. Note 4) Factors of Note ) and Note ) are ones achieved in controlled clean air. Compact yet provides a large flow capacity /4: C:.8 dm /(s bar) Low power consumption:.8 W DC Easy maintenance types of sub-plates: Plug-in and non plug-in JIS Model Non plug-in S0 S0 S0 S40 S50 S60 position position Single Closed center Double Exhaust center Pressure center Double check Port size Flow characteristics 4/ (P A/B) 4/ 5/ (A/B R/R) C C [dm /(s bar)] b Cv [dm /(s bar)] b Cv Standard Specifications Valve specifications Electricity specifications Fluid Maximum operating pressure position Min. operating pressure position Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power Inrush (Power consumption) AC Holding Power consumption DC Electrical entry Option Specifications or less or less 0 or less 0 or less 0 or less 5 or less Air/Inert gas.0 MPa 0. MPa 0.5 MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Type G, E: Dustproof (Class 0), Type F, T, D: Splashproof (Class 4) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA/50 Hz, 5.0 VA /60 Hz.4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Conduit terminal Grommet terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Pilot type Manual override Coil rated voltage Porting specifications Option External pilot Note) Non-locking push type (Extended), Locking type (Tool required), Locking type (Lever) 0 to 0, 0, 40 VAC, 50/60 Hz, 00 VDC Bottom ported With light/surge voltage suppressor Note) Operating pressure: 0 to.0 MPa Pilot pressure position: 0. to.0 MPa position: 0.5 to.0 MPa Compact, lightweight type sub-plate Compared with the standard type, this is the subplate having the reduced external dimensions and lighter weight. But, use caution that Cv factor or piping port position is different from the standards. For details, refer to page Sub-plate Max. operating cycle (cpm) L (mm) Weight (kg) Standard type Compact type position single /4 () () Response time (ms) Sonic conductance C [dm /(s bar)]..8 () Weight (kg) -8- R S S N

34 Series S000 4 How to Order With attachment plug lead wire With terminal block Body type O: sub-plate Nil Z Option None With light/surge voltage suppressor Electrical entry F: Porting specifications Nil B Side ported Bottom ported Port size Nil Nil N T F NPT NPTF G Without sub-plate conduit terminal (With terminal block) Standard type Note) grommet P0 8 (With attachment Note) plug lead wire) P0 4 Compact type Note) Please note Cv Thread type factor and piping port location of compact subplate is different from standard. Refer to page -8-5 for details. Plug-in S 00 5 F position single position double position closed center position exhaust center position pressure center position double check S Non plug-in Body type : sub-plate Nil R 0 Pilot type Internal pilot External pilot : External pilot is possible only to the one with sub-plate. Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 VDC VDC 40 VAC, 50/60 Hz Other E 0 Port size Pilot valve manual override Nil: Non-locking push type B Nil Without sub-plate : Locking type (Flush) (Tool required) 0, 8 Standard 0 type 4 A : Non-locking push type C Note) : Locking type, S0 (Extended) (Lever) 8 Compact Note) type S0 4 Note) Please note Cv factor and piping Option port location of compact sub-plate Nil None are different from standard. Refer to Z With light/surge voltage suppressor page -8-5 for S With surge voltage suppressor details. Indicator light is not available for grommet type. With surge voltage suppresor is avilable for grommet type only. Electrical entry G: Grommet E: Grommet terminal T: Conduit terminal D, Y: DIN terminal Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC (50/60 Hz) 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz 9 Other -8-4 G GS How to Order Pilot Valve Assembly SF4 Electrical entry, Light/Surge voltage suppressor F Plug-in Plug-in D DZ DO DOZ Y YZ Grommet Grommet with surge voltage suppressor DIN terminal DIN terminal with light/surge voltage suppressor DIN terminal DIN terminal with light/surge voltage suppressor DIN terminal DIN terminal with light/surge voltage suppressor Non plug-in DZ 0 YO YOZ T TZ E EZ DIN terminal DIN terminal with light/surge voltage suppressor Conduit terminal Conduit terminal with light/surge voltage suppressor Non plug-in Grommet terminal Grommet terminal with light/surge voltage suppressor DIN connector is not attached. Refer to page -8-4 for voltage conversion. Y: Conforming to DIN4650B standard Manual override Non-locking Nil push type (Flush) A Non-locking push type (Extended) B Locking type (Tool required) C Locking type (Lever)

35 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 5 Cylinder Speed Chart System Components System Solenoid valve A B System A B Series S000 8 Series S000 4 Average speed (mm/s) Speed controller Silencer AS000-0 AN0-0 (S = mm ) (S = 5 mm ) AS (S = mm ) Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CM Pressure 0.5 MPa Load factor 50% Stroke 00 mm Series MB Pressure 0.5 MPa Load factor 50% Stroke 500 mm Series CS Pressure 0.5 MPa Load factor 50% Cylinder stroke 000 mm ø0 ø5 ø ø40 ø40 ø50 ø6 ø80 ø00 ø5 ø40 ø60 AN0-0 (S = 5 mm ) Tube bore x Length T0604 x m T075 x m Perpendicular, upward actuation Horizontal actuation It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% R S S N Double Check Spacer/Specifications Can hold an intermediate cylinder position for an extended time If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Double check spacer Specifications Double check spacer part no. Applicable valve model VS000-A- S400-F Solenoid one side energized Leakage (cm /min) Solenoid both sides de-energized P P A B VS000-A- G ET S40- D R R R R R R 0 or less 0 or less Supply pressure: 0.5 MPa Caution In the case of position double check valve (S60), check the leakage from piping and fittings in between valve and cylinder by means of synthetic detergent solutions, and ensure that there is no such leakage found there. Also check the leakage from cylinder seal and piston seal. If there is any leakage, sometimes the cylinder, when valve is de-energized, can move without stopping at intermediate position. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. 0 Check Valve Operating SUP side pressure P (MPa) Piston Cylinder pressure Operating range Cylinder pressure P (MPa) Check valve SUP side pressure (P) The combination of S 0, S 0 and a double check spacer can be used as prevention of falling at the stroke end but cannot hold the intermediate position of the cylinder

36 Series S000 6 Construction position single position double position closed center/exhaust center/pressure center Closed center Exhaust center Pressure center Component Parts No. Description Material Note q w e Body Sub-plate Spool/Sleeve Aluminum die-casted Aluminum die-casted Stainless steel Platinum silver Platinum silver r Adapter plate Aluminum die-casted Platinum silver t End plate Resin Black y Piston Resin u Junction cover Resin i Cover Resin Sub-plate Assembly (Standard) Part No. Plug-in S000-LP- 0 0 Non plug-in S000-LS- 0 Mounting bolt and gasket are not included. Part no. for mounting bolt and gasket BG-S000 0 Replacement Parts No. Description Material Part no. S S S/4/5 o Return spring Stainless steel N AXT64-9-!0 Gasket NBR AXT64-0- AXT64-0- AXT64-0-! Hexagon socket head screw Steel AXT64-6 AXT64-6 AXT64-6! Detent assembly AXT64-A! Pilot valve assembly Refer to How to Order Pilot Valve Assembly on page

37 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 7 Plug-in Position single/double, position closed center/exhaust center/pressure center/double check position single: S00-F- 0 0 Manual override (Non-locking) -ø5 mounting hole - 8, 4 (P), 4(A), (B) bottom ported - 8 (R), 5(R) bottom ported G Electrical entry position double: S00-F- 0 0 position closed center: S00-F- 0 0 position exhaust center: S400-F- 0 0 position pressure center: S500-F- 0 Manual override (Non-locking) ( position: 58) -ø5 mounting hole With light/surge voltage suppressor - 8, 4-8 ( ): 8 position double check: S600-F- 0 0 Manual override (Non-locking) Bottom ported (External pilot port) (M5 x 0.8) Pilot EXH port M5 x 0.8 -ø5 mounting hole R S S N 6.5 ( position: 7) With light/surge voltage suppressor With light/surge voltage suppressor ( ): 8 ( ): 8-8-7

38 Series S000 8 Non Plug-in position single Grommet: S0-G- 0 0 Manual override (Non-locking) - 8, 4 -ø5 mounting hole (P), 4(A), (B) bottom ported - 8 (R), 5(R) bottom ported Bottom ported 00 (Lead wire length) A, B - 8, 4-8 Pilot EXH port M5 x 0.8 (External pilot port M5 x 0.8) ( ): 8 Grommet terminal: S0-E- 0 0 DIN terminal: S0- D Y- 0 0 Lead wire O.D. Max. ø.5 With light/surge voltage suppressor Light Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) With light/surge voltage suppressor Light Conduit terminal: S0-T- 0 0 Applicable heavy-duty cord O.D. ø6 to ø8 With light/surge voltage suppressor Light ( ): Y, YZ -8-8

39 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 9 Non Plug-in Position double, position closed center/exhaust center/pressure center Grommet: Double S0-G- 0 0 Closed center S0-G- 0 0, Exhaust center S40-G- 0 0, Pressure center S50-G- 0 0 Manual override (Non-locking) 50.5 ( position: 58) 7.5 -Ø5 mounting hole - 8, 4 (P), 4(A), (B) bottom ported - 8 (R), 5(R) bottom ported 00 (Lead wire length) Grommet terminal: Double S0-E- 0 0 With light/surge voltage suppressor Lead wire O.D. Max. ø.5 Closed center S0-E- 0 0 Exhaust center S40-E- 0 0 Pressure center S50-E- 0 Light 5 ( position: 59) - 8, Pilot EXH port M5 x 0.8 (External pilot port M5 x 0.8) Bottom ported A, B ( ): 8 DIN terminal: Double S0- D Y- 0 0 Closed center S0- D Y- 0 0 Exhaust center S40- D Y- 0 0 Pressure center S50- D Y- 0 0 R S S N Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) 87.5 ( position: 95) With light/surge voltage suppressor (DZ) Light Conduit terminal: Double S0-T- 0 0 Applicable heavy-duty cord O.D. ø6 to ø8 Closed center S0-T- 0 0 Exhaust center S40-T- 0 0 Pressure center S50-T ( position: 95) With light/surge voltage suppressor ( ): Y, YZ Light -8-9

40 Series S Non Plug-in position double check Grommet: S60-G- 0 0 Manual override (Non-locking) -ø5 mounting hole - /8, /4 (P), (B), 4(A) bottom ported - /8 (R), 5(R) bottom ported 00 (Lead wire length) Bottom ported (External pilot port) (M5 x 0.8) Pilot EXH port M5 x 0.8 Grommet terminal: S60-E- 0 0 DIN terminal: S60- D Y- 0 0 Lead wire O.D. Max. ø , 4 With light/surge voltage suppressor ( ): 8 Light With light/surge voltage suppressor (DZ) Light Applicable heavy-duty code O.D. ø6 to ø8 (Y: ø4.7 to ø7) Conduit terminal: S60-T- 0 0 With light/surge voltage suppressor Light ( ): Y, YZ Applicable heavy-duty code O.D. ø6 to ø8-8-40

41 Series S000 Manifold Specifications Plug-in Type: With Attachment Plug Lead Wire The insert plug is attached to the manifold block and lead wire is plugged into the valve side. Please connect with corresponding power side. Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be wired at the bottom of terminal block. One-piece junction cover Master connection of power and solenoid valves. Quick wiring permits ease of installation. Individual junction cover Multi-connector VV5FS Thread type Nil N NPT T Series S000 NPTF Passage Porting specifications F G Manifold P EA, EB A, B Port size With attachment plug lead wire Side Common Common Bottom P, EA, EB A, B Side Common Individual Bottom stations 5 M Mixed 6 Side Individual Common Bottom 5 5 stations 7 For bottom ported, 8 Side Individual Individual /8 is only With attachment plug lead wire Bottom available. Plug assembly Refer to page Conduit port VV5FS Series S000 Manifold With terminal block Junction cover Separate junction Nil cover One-piece junction cover VV5FS Series S000 Manifold 0T 0 stations 5 5 stations 0C D With multi-connector Connector mounting direction D U Junction cover One-piece junction cover mounting mounting 08 0 Passage Porting specifications P EA, EB A, B Side Common Common Bottom 4 Side Common Individual Bottom 5 Individual 6 Side Common Bottom 7 8 Side Individual Individual Bottom 05 0 Thread type Nil N NPT T NPTF F G Port size P, EA, EB A, B M Mixed For bottom ported, /8 is only available. Thread type Nil N NPT T NPTF Passage Porting specifications F G P EA, EB A, B Port size Side Common Common Bottom P, EA, EB A, B Side Common Individual Bottom stations 4 5 M Mixed Individual 6 Side Common Bottom 08 8 stations 7 For bottom Max. 8 stations 8 Side ported, /8 is Individual Individual Bottom only available. 4 R S S N Plug-in Type: With D-sub Connector (Wiring specifications: Refer to page -8-8.) Wide range of interchangeability (D-sub connector (5P) conforming to MIL standard) Quick wiring permits easier installation. D-sub connector VV5FS D U Junction cover One-piece junction cover 0F U Series S000 With D-sub connector Manifold Connector mounting direction VV5FS Series S000 Manifold mounting mounting 0 0 stations 5 5 stations 0 stations 08 8 stations Max. 8 stations 06 0 Non Plug-in Type: Grommet, Grommet Terminal, Conduit Terminal, DIN Terminal Wiring for every valve Plug assembly Refer to page Thread type Nil N NPT T NPTF Passage Porting specifications F G P EA, EB A, B Port size Side Common Common Bottom P, EA, EB A, B 0 4 Side Common Individual Bottom Individual M Mixed 6 Side Common Bottom 7 8 Side For bottom Individual Individual ported, /8 is Bottom only available. Passage Porting specifications P EA, EB A, B Side Common Common Bottom 4 Side Common Individual Bottom 5 6 Side Individual Common Bottom 7 8 Side Individual Individual Bottom Thread type Nil N NPT T NPTF F G Port size P, EA, EB A, B M Mixed For bottom ported, /8 is only available. Note) The individual specification of the P port at the composition symbol to 8 or the EA, EB, ports should be taken as individual port using a block plate. Therefore, if an individual port is using a single SUP spacer of option or a single EXH spacer, the composition symbol mark is. -8-4

42 Series S000 How to Order Manifold Assembly Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block (6 stations, one-piece style junction cover) (Manifold base) VV5FS-0T-06-0 ( position single) S00-5FZ ( position double) S00-5FZ (Blanking plate) VS000-0A (6 stations) (Manifold base) VV5FS ( position single) S0-5D ( position exhaust center) S40-5D (Individual EXH spacer) VS000-R-0- Manifold Option Parts Assembly Individual SUP spacer An individual SUP spacer set on manifold block can form SUP port for every valve. Body type 8 VS000-P-0- VS000-P-0-4 VS000-P-0- VS000-P-0- Part no. Individual EXH spacer An individual EXH spacer set on manifold block can form EXH port for every valve. (Common EXH type) Body type 8 VS000-R-0- VS000-R-0-4 VS000-R-0- VS000-R-0- Part no. Manifold Specifications Base model VV5FS-0 VV5FS-0 Wiring With attachment plug lead wire With terminal block With multi-connector With D-sub connector Grommet Grommet terminal Conduit terminal DIN terminal Porting specifications A, B port Side/Bottom Port size P, EA, EB A, B to 5 4 8, 4 stations With circular connector, with D-sub connector: 8 stations at the maximum. Applicable valve model S00-F S0-G S0-E S0-T S0-D Flow Characteristics at the Number of Manifold (Operated individually) Model VS Passage/ 4/ (P A/B) 4/ 5/ (A/B R/R) Port size 4 C [dm /(s bar)].4 b Cv C [dm /(s bar)] b Cv Interface regulator (P port regulation) Interface regulator set on manifold block can regulate the pressure to each valve. Refer to Flow Characteristics on page Station Station 5 Station Body type P port regulation ARBF P- ARBF P- Body type Part no. VS000-0A Air shutoff valve spacer When stopping supply air and releasing residual pressure after completion of work, actuators may move from original position. Air shut off valve spacer makes it possible to stop actuators in original position for extended periods. Body type Part no. VS000-A- VS000-A- Blanking plate It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. Accessory One pair of gasket and mounting thread is attached to every option parts assembly. Manifold Option With control unit / Filter, regulation valve, pressure switch and air release valve are all combined to form one unit. Piping processes are eliminated. 4 SUP block disk When supplying manifold with more than two different pressures, high and low, insert a block disk in between stations subjected to different pressures. Body type Part no. AXT65-A EXH block disk When valve exhaust affects the other stations on the circuit or when the reverse pressure valve is used to standard manifold valve, insert EXH block disk in between stations to separate valve exhaust. Body type Part no. AXT65-A Throttle valve spacer Needle valve set on the manifold block can control cylinder speed by throttling exhaust. Not mountable for standard type sub-plate. Air release valve spacer The concurrent use of air release valve spacer with S0 can release air. Body type Part no. L VS000-4A- R L VS000-4A- R Note) L: mount R: mount Double check spacer If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Body type Part no. VS000-0A- VS000-0A- Body type Part no. VS000-A- VS000-A- For details, refer to page With serial interface unit for serial transmission Solenoid valve wiring process reduced considerably. Disperse installation possible. Manifold solenoid valve: 8 stations max. positions (5 solenoids). Maintenance and inspection are easy. For details, refer to Serial Transmission catalog separately. -8-4

43 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 4 Manifold, (Insert plug with lead wire): VV5FS-0- Station - Port size n- /8 (B), 4(A) port Bottom ported: VV5FS-0- Station - Port size Formula for manifold weight M = 0.0n (kg) n: Station - /8 Pilot EXH port -G / Electrical entry : VV5FS-0- Station - Port size (B), 4(A) port With light/surge voltage suppressor 6- /4 (P), (R), 5(R) port n- 8, 4 R S S N n- 8 (B), 4(A) port Bottom ported: VV5FS-0- Station - Port size n- 8, 4 (B), 4(A) port L Formula for manifold weight M = 0.74n (kg) L L Pilot EXH port n: Formula L = 8 x n + 47 L = 8 x n mm (Lead wire length) 6-4 (P), (R), 5(R) port -8-4

44 Series S Manifold : Individual/One-piece junction cover with terminal block (Individual junction covers): VV5FS-0T- Station - Port size n- 8 (B), 4(A) port Bottom ported: VV5FS-0T- Station - Port size n- 8, 4 (B), 4(A) port With light/surge voltage suppressor - 8 Pilot EXH port -G 4 Electrical entry Formula for manifold weight M = 0.5n (kg) n: Station 6-4 (P), (R), 5(R) port with terminal block (One-piece junction covers): VV5FS-0T- Station - Port size n- 8 (B), 4(A) port Bottom ported: VV5FS-0T- Station - Port size n- 8 Pilot EXH port -G 4 Electrical entry n- 8, 4 (B), 4(A) port With light/surge voltage suppressor L Formula for manifold weight M = 0.6n (kg) n: Station L L Formula L = 8 x n + 47 L = 8 x n (P), (R), 5(R) port -8-44

45 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold Plug-in with multi-connector/with D-sub connector Plug-in with multi-connector: VV5FS-0CD- Station - Port size, VV5FS-0CU- Station - Port size n- 8 (B), 4(A) port R Bottom ported: VV5FS-0 CD CU - Station - Port size Plug assembly: VS000-0A- (Option: Refer to page -8-8.) n- 8 Pilot EXH port n- 8, 4 (B), 4(A) port With light/surge voltage suppressor S S Formula for manifold weight M = 0.n (kg) n: Station Wiring specifications: Refer to page (P), (R), 5(R) port N with D-sub connector: VV5FS-0FD- Station - Port size, VV5FS-0FU- Station - Port size n- 8 (B), 4(A) port Bottom ported: VV5FS-0 FD FU - Station - Port size Plug assembly: VS000-A- (Option: Refer to page -8-8.) n- 8, 4 (B), 4(A) port With light/surge voltage suppressor Formula for manifold weight M = 0.78n (kg) Wiring specifications: Refer to page Pilot EXH port L L L n: Formula L = 8 x n + 47 L = 8 x n (P), (R), 5(R) port -8-45

46 Series S Manifold Option Parts Individual SUP spacer: VS000-P () VS000-P (), Interface regulator: ARBF P- () ARBF P- () Individual SUP spacer Interface regulator SUP port Individual EXH spacer: VS000-R () VS000-R () Air shutoff valve spacer: VS000-A- () VS000-A- () Individual EXH port Air shutoff valve spacer EXH port SUP block disk: AXT65-A EXH block disk: AXT65-A Release valve spacer: VS000-4A- R L () VS000-4A- R L () Valve S0 (Single) Block disk Release valve spacer SUP port Note) VS000-4A- R. D-side mounting. Throttle valve spacer: VS000-0A- () VS000-0A- () Double check spacer: VS000-A- () VS000-A- () Throttle valve spacer Double check spacer -8-46

47 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold with Control Unit Control unit (Filter, Regulator, Pressure switch, Air release valve) are all standardized to the one unit, and can be mounted on the manifold base without any attachments. Piping processes are eliminated. When using an air filter with auto-drain or manual drain, mount the filter vertically. 0 0T 0C 0F 0 Caution How to Order Manifold Specifications Wiring Manifold Applicable valve model Porting specifications : VV5FS-0 Plug-in with attachment plug lead wire With terminal block With multi-connector With D-sub connector S00-F (B), 4(A) port (P), (R), 5(R) port With multi-connector, or D-sub connector: 8 stations max. Control Unit Specifications Air filter (With auto-drain/with manual drain) Filtration degree 5 µm Regulator Set pressure (Outlet pressure) 0.05 to 0.85 MPa Pressure switch () Set pressure range: OFF 0. to 0.6 MPa Differential 0.08 MPa or less Contact a Indicator light LED (RED) Max. switch capacity VA AC, W DC 4 VAC/DC or less: 50 ma Max. operating current 00 VAC/DC: 0 ma Air release valve (Single only) Operating pressure range 0. to.0 MPa VV5FS AP Series S000 Manifold Base type/electrical entry with attachment plug lead wire with terminal block with multi-connector with D-sub connector Connector mounting direction With connector Applicable base Nil None 0, 0T, 0 0 stations D mounting 0C, 0F U mounting 5 5 stations Junction cover Base type 0, 0T, 0: to 5 stations Nil Stacking type 0C, 0F: to 8 stations Integrated type Note) Stacking type: Porting Base type 0, 0T Passage specifications Integrated type: P EA, EB B, A Base type 0T, 0C, 0F Side Common Common Bottom Side 4 Common Individual Bottom 5 Side 6 Individual Common Bottom 7 Side 8 Individual Individual Bottom The individual specification of the P port in the composition symbol marks to 8 or EA, EB ports should be taken as individual port using a block plate. Therefore, if an individual port is taken using a single SUP spacer of option or a single EXH spacer, the composition symbol mark is. Port size 0 0 M Nil N T F P, EA, EB 4 : VV5FS-0 Grommet Grommet terminal Conduit terminal DIN terminal S0-G, S0-E S0-T, S0-D Common SUP, Common EXH Side: /8, /4, Bottom: /8 (Option) Side: /4, /8, Bottom: /8 (Option) to 5 stations Control Unit/Option Air release valve spacer Pressure switch () <> VS000-4A-R ( mounting) VS000-4A-L ( mounting) <> VS000-4A-R ( mounting) VS000-4A-L ( mounting) IS000P-- With control unit/filter regulator MP- Blanking Pressure switch MP- plate Release valve AXT65-8A Filter element 5-5B Note ) Voltage: 4 VDC to 00 VAC Inner voltage drop: 4 V Note ) Refer to manifold option parts on page Note ) The non plug-in type cannot be mounted afterwards. Note) The manifold of plug-in type with attachment plug lead wire is applied to individual type only. has no junction Air release valve coil rating Nil None (F, G type only) 00 VAC, 50/60 Hz 5 4 VDC 9 Other Control unit type Control equipment Nil A AP M MP F G C E Air filter with auto-drain Air filter with manual drain Regulator Air release valve Pressure switch Blanking plate (Air release valve) Blanking plate (Filter, Regulator) Blanking plate (Pressure switch) Number of manifold blocks required for mounting (stations) Thread type NPT NPTF G B, A 8 4 Mixed () Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block (Manifold base) VV5FS-0T-09-0-MP5 ( position single) S00-5FZ ( position double) S00-5FZ stations are needed to mount control unit. (Manifold base) VV5FS M ( position single) S0-5D stations are needed to mount control unit. 5 5 R S S N -8-47

48 Series S Manifold with Control Unit, : VV5FS-0T- Station - Port size - Control unit Voltage for release valve Example for manifold Individual EXH spacer n- 8, 4 Double check spacer Individual SUP spacer Pressure switch Air release valve With light/surge voltage suppressor Control unit Air release valve Outlet for check Air filter regulator Pressure switch Control unit - 8 Pilot EXH port -G 4 Electrical entry Po port 6-4 (P), (R), 5(R) port : VV5FS-0- Station - Port size - Control unit Voltage for release valve Example for manifold Individual EXH spacer Double check spacer n- 8, 4 A, B port Individual SUP spacer Air release valve Pressure switch Pressure switch Air release valve Outlet for check Air filter regulator Pressure switch electrical entry Control unit Pilot EXH port Po port (P), (R), 5(R) port L L L n: Formula L = 8 x n + 47 L = 8 x n + 56 L (MP) L = 8 x n + 94 L (AP) L = 8 x n

49 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Dripproof Manifold (Equivalent to IP65) Manifold Specifications Manifold VV5FS-0WTB U D VV5FS-0W Wiring Applicable value model Common terminal box Attachment plug lead wire S00-F-X54 Common SUP, Common EXH Porting specifications (B), 4(A) port Side: /8, /4, Bottom: /8 (Option) (P), (R), 5(R) port Side: /4 to 0 stations to 5 stations How to order manifold 0WTBU 0WTBD 0W VV5FS Plug-in dripproof manifold (Equivalent to IP65) Common terminal box ( mounting) Common terminal box ( mounting) Attachment plug lead wire How to order valves S position single position double position closed center position exhaust center position pressure center position double check 00 How to Order 0WTBU stations 5 F 5 stations Port size P, R, R A, B M Mixed For bottom ported, A/B port is available only with 8. Passage P, R, R A, B Side Common Bottom X54 Dripproof Pilot valve manual override Porting specifications Nil Non-locking push type (Flush) A Non-locking push type (Extended) B Locking type (Tool required) C Locking type (Lever) R S S N Nil R Pilot type Internal pilot External pilot Option Nil Z None With light/surge voltage suppressor Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz 9 Other -8-49

50 Series S Dripproof Manifold U With common terminal box: VV5FS-0WTB - Station - Port size D - 8 Pilot EXH port Push type manual override Indicator light 58 ( position) 50.5 (Double) 0 (Single) 6-4 (P), (R), 5(R) port - 8 External pilot port x 5 Printed Bottom ported: VV5FS-0WTBD- Station -0 -G 4 Electrical entry P = 5 n- 8, 4 (B), 4(A) port n- 8 Terminal mounting stations are not included. Indicates Solenoid valve mounting stations. -G 4 Electrical entry 6-4 (P), (R), 5(R) port L L L - 8 Pilot EXH port Insert plug with lead wire Lead wire length L = With attachment plug lead wire: VV5FS-0W- Station - Port size Push type manual override Indicator light n: Formula L = 5 x n + 95 L = 5 x n ( position) 50.5 (Double) 0 (Single) - 8 External pilot port Bottom ported: VV5FS-0W- Station -0 n- 8, 4 (B), 4(A) port L L L n n: Formula L = 5n + 45 L = 5n

51 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 5 Manifold Base Construction, End plate () R S S End plate () N Replacement Parts No. q w e r t y u Description Connection fitting A Connection fitting B Gasket A Gasket B O-ring O-ring O-ring Adapter plate Adapter plate assembly Material Steel plate Steel plate NBR NBR NBR NBR NBR Resin i Adapter plate Resin For 0 For 0T For 0T For 0C For 0F For 0SU Part no. AXT65-4- AXT65-5 AXT65-7 AXT x 5 x x 7.5 x.5 8 x 5 x.5 AXT65-6 AXT65-8-A (Terminal section with adapter plate) AXT65-8- V AXT65-6 No. Description Material Part no. o For 0 For 0T Junction cover For 0T assembly For 0C For 0F For 0SU AXT65-7A AXT65-8-A AXT65-8-7A- V A- AZ78-0A- For 0 AXT- Rubber plug NBR 0T! For 0SU AXT65- Plug For 0 W EXPS For increasing the manifold bases, please order the manifold block assembly number of the principle number assembly!0. For plug-in type: The manifold base with terminal stand (integrated with a junction cover) is required with the o junction cover assembly. Replacement Parts: Sub Assembly Note) Manifold Base/Construction: with terminal block. No. Description Assembly part no. Component parts Applicable manifold base Note) Manifold block!0, Metal joint q, w. O-ring t, y, u Junction AXT65-0A- cover, Adapter plate, Pin housing, Guide, Insert plug lead wire With attachment plug lead wire!0 Manifold block Note) Manifold block!0, Metal joint q, w, O-ring t, y, u Terminal i, assembly AXT65-0A- Junction cover o, Adaptor plate, Pin housing, Guide With terminal block Note) AXT65-0A- Manifold block!0, Metal joint q, w, O-ring t, y, u AXT65-A End plate (U)!, Metal joint q, w, Gasket A e, Guard! With attachment plug lead wire End plate ()! assembly AXT65-A-0 End plate (U)!, Metal joint q, w, Gasket A e, Guard! With terminal block AXT65-A-0 End plate (U)!, Metal joint q, w, Gasket A e, Guard! AXT65-A End plate (D)!, Metal joint q, w, Gasket B r, Guard!, Steel ball With attachment plug lead wire! End plate () assembly AXT65-A-0 End plate (D)!, Metal joint q, w, Gasket B r, Guard!, Steel ball With terminal block AXT65-A-0 End plate (D)!, Metal joint q, w, Gasket B r, Guard!, Steel ball Note) A, B ports: /8, /4-8-5

52 Series S000 5 Light Compact Type Sub-plate/C:.8 dm /(s bar) C:. dm /(s bar) L dimension C:.8 dm /(s bar) L dimension Sub-plate Type Compact type Standard type L dimension (mm) 5.5 Weight (kg) Compact type Standard type Sub-plate Compact: Plug-in, Grommet (With attachment plug lead wire) S00-F-(B) P0 P0 0 Sub-plate assembly part no.: S000-CP-(B) (0: 8, 0: 4 ) 00 0 (Center) Pilot EXH port M5 x 0.8 ( ): Port size P0 Lead wire -ø4.5 mounting hole Bottom ported G (PF) /4 Electrical entry 5-bottom ported size (Refer to the below right.) 5-bottom ported size (Refer to the below right.) Port Size Port size P0 P0 Port P, A, B 8 4 Bottom Ported Size Port size BP0 Port P, A, B BP0, EA, EB 8 8 EA, EB M5 8 Sub-plate Compact: Non plug-in S0--(B) S0 S0 0 Sub-plate assembly part no.: S000-CS-(B) (0: 8, 0: 4 ) 5-bottom ported size (Refer to the below right.) 0 -ø4.5 mounting hole Bottom ported (Center) Port Size Port size S0 S0 Port P, A, B 8 4 EA, EB 8 8 ( ): Port size S0 Pilot EXH port M5 x bottom ported size (Refer to the below right.) Bottom Ported Size Port size BS0 BS0 Port P, A, B 8 8, 4 EA, EB M5 8 Precautions Please pay attention to piping port location of sub-plate. P0/0 0 S0-- S0/0: Compact type S0-- 0: Standard type Electrical Connection Compact type, plug-in type grommet subplate (With attachment plug lead wire) The attachment plug lead wire is attached to the manifold block and lead wire is plugged in with valve side as shown in the following list. Please connect with corresponding power side. Solenoid A side B side Lead wire color Red Black Brown White There is no polarity. -8-5

53 For details about certified products conforming to international standards, visit us at Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 Model position position Type of actuation Single Double Closed center Exhaust center Pressure center Double check Compact yet provides a large flow capacity /8: C: 5.8 dm /(s bar) Low power consumption:.8 W DC Easy maintenance types of sub-plates: Plug-in and non plug-in JIS position Single Plug-in S00 S00 S00 S400 S500 S600 Model Non plug-in S0 S0 S0 S40 S50 S60 Port size Flow characteristics 4/ (P A/B) 4/ 5/ (A/B R/R) C C [dm /(s bar)] b Cv [dm /(s bar)] b Cv Standard Specifications Option 0 or less 5 or less 40 or less 40 or less 40 or less 50 or less Note ) Based on JIS B 875 (once per 0 days) for the minimum operating frequency. Note ) Based on JIS B (the value at supply press. 0.5 MPa). Note ) The figures in the above list are for without sub-plate. In the case of with plug-in sub-plate and with non plug-in sub-plate, add 0.0 kg and 0.7 kg respectively. Note 4) Note ) and Note ) are with controlled clean air. Double position Closed center Exhaust center Pressure center Double check Valve specifications Electricity specifications Fluid Maximum operating pressure Minimum operating pressure Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power (Power consumption) AC Power consumption DC Electrical entry Inrush Holding Air/Inert gas.0 MPa 0. MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Type E: Dustproof (Level 0), Type F: Dripproof (Level ), Type D: Splashproof (Level 4) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA/50 Hz, 5.0 VA/60 Hz.4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Conduit terminal DIN terminal, Grommet terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Pilot type Manual override Main valve Pilot valve Coil rated voltage Porting specifications Option Note) Operating pressure: 0 to.0 MPa Pilot pressure: 0. to.0 MPa Max. operating cycle (cpm) External pilot Note) Direct manual override type Non-locking push type (Extended), Locking type (Tool required), Locking type (Lever) 0 to 0, 0, 40 VAC (50/60 Hz), 00 VDC Bottom ported With light/surge voltage suppressor () () Response time (ms) () Weight (kg) R S S N -8-5

54 Series S Body type O: sub-plate How to Order Electrical entry F: conduit terminal Porting specifications Nil Side ported B Bottom ported Plug-in S 0 0 F 0 Port size Nil Without sub-plate For bottom ported, 4 is only available. Thread type Nil N T F NPT NPTF G Non plug-in S D 0 Option Nil Z None With light/surge voltage suppressor Pilot valve Manual override Nil: Non-locking push type (Flush) position single position pressure center Electrical entry E: Grommet terminal D: DIN terminal 5 A : Non-locking push type (Extended) position double position double check 6 4 position closed center position exhaust center Reverse pressure: Can be used by external pilot specifications. Body type : sub-plate Pilot type Nil R Coil rated voltage VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 VDC VDC 40 VAC, 50/60 Hz Other Internal pilot External pilot B : Locking type (Tool required) C : Locking type (Lever) Body Option 0 Standard Direct manual override How to Order Pilot Valve Assembly SF4 Coil rated voltage F 0 Rated voltage Manual override 00 VAC, 50/60 Hz Nil 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 4 A 0 VAC, 50/60 Hz 5 4 VDC 6 B VDC C Refer to page -8-5 for voltage conversion VAC, 50/60 Hz 9 Other Manual override Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) Locking type (Lever) -8-54

55 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Cylinder Speed Chart System Components System A B System A B Solenoid valve Series S000 4 Series S000 8 Speed controller AS (S = 4 mm ) AS40-0 (S = 7 mm ) Double Check Spacer/Specifications Specifications Can hold an intermediate cylinder position for an extended time If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Double check spacer Average speed (mm/s) Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series MB Pressure 0.5 MPa Load factor 50% Stroke 500 mm Series CS Pressure 0.5 MPa Load factor 50% Cylinder stroke 000 mm ø40 ø50 ø6 ø80 ø00 ø5 ø40 ø60 ø80 ø00 Silencer SGP (Steel pipe) Port size x Length AN00-0 (S = 5 mm ) 6A x m AN00-0 (S = 60 mm ) 0A x m Double check spacer part no. Applicable valve model Leakage (cm /min) VS000-A- S400-F Solenoid one side energized Solenoid P both sides de-energized A B Supply pressure: 0.5 MPa VS000-A- S40-D S40-E Caution In the case of position double check valve (S60), check the leakage from piping and fittings in between valve and cylinder by means of synthetic detergent solutions, and ensure that there is no such leakage found there. Also check the leakage from cylinder seal and piston seal. If there is any leakage, sometimes the cylinder, when valve is de-energized, can move without stopping at intermediate position. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. P EA 0 EB or less EA 0 EB or less EA 0 EB Perpendicular, upward actuation Horizontal actuation It is when the cylinder is extending that is meterout controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% Check Valve Operation SUP side pressure P (MPa) Piston Cylinder side pressure (P) Operating range The combination of S 0, S 0 and double check spacer can be used as prevention for falling at the stroke end but cannot hold the intermediate position of the cylinder. 0 Check valve SUP side pressure (P) Cylinder side pressure P (MPa) 0 R S S N -8-55

56 Series S Construction position single position double position closed center/exhaust center/pressure center Closed center Exhaust center Pressure center Component Parts No. Description q Body w Sub-plate e Spool/Sleeve r Adapter plate t End plate y Piston u Junction cover i Light cover Material Aluminum die-casted Aluminum die-casted Stainless steel Resin Resin Resin Resin Resin Note Platinum silver Platinum silver Black Black Sub-plate Part No. 0 Plug-in S000-P- 0 0 Non plug-in S000-S- 0 Mounting bolt and gasket are not included. Part no. for mounting bolt and gasket BG-S000 Replacement Parts No. Description Material Part no. S S S/4/5 o!0 Return spring Gasket Stainless steel NBR S S000-0 S000-0 S S000-0! Hexagon socket head screw Steel M x M x M x! Detent assembly S000-9A! Pilot valve assembly Refer to How to Order Pilot Valve Assembly on page

57 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Plug-in position single, position closed center/exhaust center/pressure center/double check position single: S00-F -ø5.6 mounting hole /8 external pilot port (Only for external pilot) (B), 4(A) port 8 (PE port) Pilot valve manual override G / electrical entry position double: S00-F position closed center: S00-F position exhaust center: S400-F position pressure center: S500-F -ø5.6 mounting hole With direct manual override 5-4, ( position: 75) Light window At Fz 5-4 Bottom ported position double check: S600-F -ø5.6 mounting hole -ø5.6 mounting hole ( ): 4 R S S N Pilot valve manual override 86.5 ( position: 96.5) Light window At Fz With direct manual override Pilot valve manual override G / electrical entry G / electrical entry 5-4, 8 5-4, 8 Light window At Fz With direct manual override ( ): 4 ( ):

58 Series S Non Plug-in Position single/double, position closed center/exhaust center/pressure center/double check position single: S0-E, S0-D -ø5.6 mounting hole /8 external pilot port (Only for external pilot) (B), 4(A) port 8 (PE port) Cable ø8 to ø0 Pilot valve manual override Light window At DZ, EZ -ø5.6 mounting hole With direct manual override 5-4 Bottom ported 5-4, 8 ( ): 4 position double: S0-E, S0-D position closed center: S0-E, S0-D position exhaust center: S40-E, S40-D position pressure center: S50-E, S50-D position double check: S60-E, S60-D -ø5.6 mounting hole -ø5.6 mounting hole Applicable heavy-duty cord O.D. ø8 to ø0 Pilot valve manual override Light window at DZ, EZ Applicable heavy-duty cord O.D. ø8 to ø0 Pilot valve manual override With direct manual override 65 ( position: 75) Light window At DZ, EZ With direct manual override 5-4, 8 5-, 4 8 ( ): 4 ( ):

59 59 Series S000 Manifold Specifications Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be wired at the bottom of terminal block. Master connection of power and solenoid valves. Quick wiring permits easier installation. Wide range of interchangeability (MIL Spec DIN connector terminal 5 pcs attached.) Quick wiring permits easier installation. VV5FS 0T Series S000 Manifold with terminal block 0 stations VV5FS D U D U 0 0C 0 stations Plug-in Type: With Multi-connector (Wiring specifications: Refer to page -8-8.) D Series S000 Manifold Connector mounting with multi-connector Plug-in Type: With D-sub Connector Terminal block Multi-connector D-sub connector Plug assembly (Option) Refer to page VV5FS Series S000 Manifold with D-sub connector Plug assembly (Option) Refer to page direction mounting mounting 0 stations 0F mounting mounting Thread type Port size P, EA, EB A, B Nil N NPT 0 4 T NPTF 0 8 F G M Mixed Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom stations Max. 8 stations (Wiring specifications: Refer to page -8-8.) D Connector mounting direction 0 stations 08 8 stations Max. 8 stations Thread type Port size Nil P, EA, EB A, B N NPT 0 T NPTF 0 8 F G M Mixed Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom Thread type Port size Nil P, EA, EB A, B N NPT 0 T NPTF 0 8 F G M Mixed Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom R S S N Non Plug-in Type: Grommet Terminal, DIN Terminal Wiring for every valve. Grommet terminal DIN terminal VV5FS Series S000 Manifold stations 0 stations 05 0 Thread type Port size Nil P, EA, EB A, B N NPT 0 T NPTF 0 8 F G M Mixed Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom -8-59

60 Series S How to Order Manifold Assembly Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block: 6 stations (Manifold base) VV5FS-0T-06-0 ( position single) S00-5FZ ( position double) S00-5FZ (Blanking plate) VS000-0A <Example> : 6 stations (Manifold base) VV5FS ( position single) S0-5D 5 ( position exhaust center) S40-5D (Individual EXH spacer) VS000-R-0- Manifold Option Parts Assembly Individual SUP spacer An individual SUP spacer set on manifold block can form SUP port for every valve. Body type Part no. VS000-P-0- VS000-P-0- Manifold Specifications Base model VV5FS-0 VV5FS-0 Wiring With terminal block With multi-connector With D-sub connector DIN terminal Grommet terminal Flow Characteristics at the Number of Manifold (Operated individually) Model VV5FS Throttle valve spacer Needle valve set on the manifold block can control cylinder speed by throttling exhaust. Porting specifications A, B port Side/ Bottom Port size P, EA, EB A, B () () 4, 8 to 0 Note ) Appropriate silencer for EA, EB port: AN40-04 (O.D. ø7). Note ) With multi-connector, or with D-sub connector: 8 stations max. Port size: /8 Body type Part no. Passage/ 4/ (P A/B) 4/ 5/ (A/B R/R) VS000-0A- C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv VS000-0A- Applicable valve model S00-F S0-D S0-E Station Station 5 Station Manifold Option With exhaust cleaner /Non Valve exhaust noise dampening: 5 db or more. Oil mist collection: Rate of collection 99.9% or more. Piping process reduced. Individual EXH spacer An individual EXH spacer set on manifold block can form EXH port for every valve. (common EXH type) Body type Part no. Body type Part no. VS000-R-0- SUP block disk EXH block disk VS000-R-0- When supplying manifold with more than two different pressures, high and low, insert a block disk in between stations subjected to different pressures. AXT66-A When valve exhaust affects the other stations on the circuit or when the reverse pressure valve is used to standard manifold valve, insert EXH block disk between stations to separate valve exhaust. Body type Part no. AXT66-A Double check spacer If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Body type Part no. VS000-A- VS000-A- Interface regulator Interface regulator set on manifold block can regulate the pressure to each valve. (Refer to page -8-6 for Flow Characteristics.) Body type P port regulation A port regulation B port regulation ARBF P- ARBF A- ARBF B- ARBF P- ARBF A- ARBF B- For details, refer to page With control unit /Non Filter, regulation valve, pressure switch and air release valve are all combined to form one unit. Piping processes are eliminated. For details, refer to page With serial interface unit for serial transmission Solenoid valve wiring process reduced considerably. Disperse installation possible. Manifold solenoid valve: 8 stations max. positions (5 solenoids). Maintenance and inspection are easy Blanking plate It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. Body type Part no. VS000-0A For details, refer to Serial Transmission catalog separately.

61 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 6 Manifold, (With terminal block): VV5FS-0T- Station - Port size n- 4, 8 Bottom ported: VV5FS-0T- Station - Port size Formula for manifold weight M = 0.405n (kg) n: Station - 8 (Pilot EXH port: PE) : VV5FS-0- Station - Port size -G /4 Electrical entry n- 4, 8 Pilot valve manual override Light window - 8 (External pilot port) R S S N n- 4, 8 Pilot valve manual override n- 4, 8 Light window Bottom ported: VV5FS-0- Station - Port size Applicable cabtire cable O.D. ø8 to ø0-8 (Pilot EXH port: PE) - 8 (External pilot port) 6- L Formula for manifold weight M = 0.09n (kg) L L n: Formula L = x n + 6 L = x n

62 Series S000 6 Manifold with multi-connector/d-sub connector with multi-connector: VV5FS-0CD- Station - Port size, VV5FS-0CU- Station - Port size Pilot valve manual override n- 4, 8 Bottom ported: VV5FS-0 - Station - Port size CD CU Plug assembly VS000-0A- (Option: Refer to page -8-8.) Light window n- 4, 8 - /8 (Pilot EXH port: PE) - /8 (External pilot port) 6- / Formula for manifold weight M = 0.4n (kg) n: Station Wiring specifications: Refer to page with D-sub connector: VV5FS-0FD- Station - Port size, VV5FS-0FU- Station - Port size n- 4, 8 Pilot valve manual override n- 4, 8 Light window Bottom ported: FD VV5FS-0 - Station - Port size FU Formula for manifold weight M = 0.4n (kg) n: Station Wiring specifications: Refer to page Plug assembly VS000-A- (Option: Refer to page -8-8.) - /8 (Pilot EXH port: PE) - /8 (External pilot port) L L L n: Formula L = x n + 6 L = x n / -8-6

63 Manifold with Exhaust Cleaner 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S000 6 Serves to protect working environment. Valve exhaust noise dampening: 5 db or more. Collection rate of drainage and oil mist: 99.9% or more. Piping work is reduced. Exhaust cleaner AMC60-0 (Option) Exhaust cleaner AMC60-0 (Option) Manifold Specifications Wiring Manifold : VV5FS-0 With terminal blocks With multi-connector With D-sub connector : VV5FS-0 DIN terminal Grommet terminal Applicable valve model S00-F S0-D, S0-E Common SUP, Common EXH Porting specifications (B), 4(A) port /4, /8 (P), (R), 5(R) port P: /, EXH: to 0 () Applicable exhaust cleaners AMC60-0 (Connecting port size R ) () Note ) With multi-connector, or with D-sub connector: 8 stations max. Note ) Exhaust cleaner AMC60-0 is not attached. VV5FS Series S000 Manifold Base type/electrical entry 0T 0C with terminal block with multi-connector 0F 0 with D-sub connector Connector mounting direction With connector Applicable base Nil D U None mounting mounting CD 0T, 0 0C, 0F 0 stations 0 0 stations Base type 0T, 0: -0 stations Base type 0C, 0F: -8 stations How to Order Nil N T F Port size Exhaust cleaner mounting direction Exhaust cleaner mounting direction CD CU Thread type NPT NPTF G P A, B M Mixed Passage Porting specifications P R, R (A, B) Side Common Common Bottom mounting mounting R S S N Caution When using an exhaust cleaner, mount it downwards. For details about exhaust cleaners, refer to Best Pneumatic Vol. 5. Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block (6 stations) (Manifold base) VV5FS-0T-06-0-CD ( position single) S00-5FZ ( position double) S00-5FZ (Blanking plate) VS000-0A (Exhaust cleaner) AMC60-0 (6 stations) (Manifold base) VV5FS CU ( position single) S0-5E ( position double) S0-5E (Blanking plate) VS000-0A (Exhaust cleaner) AMC

64 Series S Manifold with Exhaust Cleaner : VV5FS-0T- Station - Port size - CD CU, Pilot valve manual override Light n- 4, 8 Pilot valve manual override Exhaust cleaner (Option) 5 - /8 (Pilot EXH port: PE) -G /4 Electrical entry - /8 (External pilot port: X) 6- / mounting mounting : VV5FS-0- Station - Port size - CD CU n- 4, 8 Pilot valve manual override Light 5 Exhaust cleaner (Option) - /8 (Pilot EXH port: PE) - /8 (External pilot port: X) 6- / mounting mounting L L L n: Formula L = x n + 6 L = x n

65 Manifold with Control Unit 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Control unit (Filter, Regulator, Pressure switch, Air release valve) are all standardized to the one unit, and can be mounted on the manifold base without any attachments. Piping processes are eliminated. Manifold Specifications Manifold : VV5FS-0 : VV5FS-0 With terminal block DIN terminal Wiring With multi-connector Grommet terminal With D-sub connector Applicable valve model S00-F S0-D, S0-E Common SUP, Common EXH Porting specifications (B), 4(A) port /4, /8 (P), (R), 5(R) port / to 0 With multi-connector, or with D-sub connector: 8 stations max. Control Unit Specifications Air filter (With auto-drain/with manual drain) Filtration degree 5 µm Regulator Set pressure (Outlet pressure) 0.05 to 0.85 MPa Pressure switch () Set pressure range: OFF 0. to 0.6 MPa Differential 0.08 MPa or less Contact a Indicator light LED (RED) Max. switch capacity VA AC, W DC 4 VAC/DC or less: 50 ma Max. operating current 00 VAC/DC: 0 ma Air release valve (Single only) Operating pressure range 0. to.0 MPa VV5FS AP Series S000 Manifold Base type/electrical entry 0T with terminal block 0C with multi-connector 0F with D-sub connector 0 Connector mounting direction With connector Applicable base Nil None 0T, 0 D mounting 0C, 0F U mounting 0 stations Passage 0 0 stations P EA, EB Base type 0T, 0: to 0 stations Common Common Base type 0C, 0F: to 8 stations Port size P, EA, EB 0 0 M Caution When using an air filter with auto-drain or manual drain, mount the filter vertically. Porting specifications (A, B) Side Bottom How to Order A, B Thread type 4 Nil 8 N Mixed NPT NPTF G T F Control Unit/Option Air release () valve spacer Pressure () switch Blanking plate <> VS000-4A-R ( mounting) <> VS000-4A-R ( mounting) Filter regulator Pressure switch Release valve IS000P-- MP- MP- VS000-4A-0 Filter element INA B Note ) Voltage: 4 VDC to 00 VAC Inner voltage drop: 4 V Note ) Combination of valve S (single) and a release valve spacer can be used an air release valve. Note ) The non plug-in type cannot be mounted afterwards. Air release valve coil rating Nil None (F, G type only) VAC, 50/60 Hz 4 VDC Other Control unit type Control equipment Nil A AP M MP F G C E Air filter with auto-drain Air filter with manual drain Regulator Air release valve Pressure switch Blanking plate (Air release valve) Blanking plate (Filter, Regulator) Blanking plate (Pressure switch) Number of manifold blocks required for mounting (stations) Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block In order to mount control unit, it requires stations. (Manifold base) ( position single) ( position double) <Example> VV5FS-0T-08-0-AP5 S00-5FZ S00-5FZ 4 In order to mount control unit, it requires stations. (Manifold base) ( position single) VV5FS A S0-5D 4 R S S N -8-65

66 Series S Manifold with Control, : VV5FS-0T- Station - Port size -AP Voltage for release valve n- 4, 8 Pilot valve manual override Example for manifold Individual EXH spacer (VS000-R-0-) Double check spacer (VVS000-A-) Individual SUP spacer (VS000-P-0-) 08 Light Pressure switch Air release valve (95: -MP) / (Po port) - /8 (External pilot port: X) Air release valve Air filter regulator Pressure switch Outlet for check Control unit - 8 (Pilot EXH port: PE) 9 -G 4 Electrical entry : VV5FS-0- Station - Port size -AP Voltage for release valve Pilot valve manual override n- 4, 8 Example for manifold (B) 4(A) (B) 4(A) (B) 4(A) Individual EXH spacer (VS000-R-0-) Double check spacer (VS000-A-) Individual SUP spacer (VS000-P-0-) Pressure switch Air release valve Light Air release valve Pressure switch Outlet for check (95: -MP) Air filter regulator Control unit 08-8 (Pilot EXH port: PE) 9 / (Po port) - 8 (External pilot port: X) 6-RC / L L L L (MP) L (AP) Formula L = x n + 6 L = x n L = x n L = x n

67 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold Option Parts Individual SUP spacer: VS000-P-0- () VS000-P-0- (), Double check spacer: VS000-A- () VS000-A- () (57: With direct manual override) Individual SUP spacer Individual EXH spacer: VS000-R-0- () VS000-R-0- () (57: With direct manual override) Individual EXH spacer SUP/EXH block disk: AXT66-A Interface regulator/p port regulation: ARBF P- () ARBF P- () (68: With direct manual override) Interface regulator Double check spacer Interface regulator/a port regulation: ARBF A- () ARBF A- () R S S N Block disk mounting position (68: With direct manual override) Interface regulator Throttle valve spacer: VS000-0A- () VS000-0A- () Interface regulator/b port regulation: ARBF B- () ARBF B- () (57: With direct manual override) Throttle valve spacer (68: With direct manual override) Interface regulator -8-67

68 Series S Manifold Base Construction, End plate () End plate () Replacement Parts No. q w e r t y u i o! Description Connection fitting A Connection fitting B Gasket Gasket O-ring O-ring O-ring Terminal assembly Junction cover assembly Rubber plug Material Steel plate Steel plate NBR NBR NBR NBR NBR For 0T For 0SU NBR Replacement Parts: Sub Assembly Part no. VS000-5-A VS VS VS x 6.6 x.6 (End plate) 0 x 6 x (Manifold block) 6. x x.6 VS000-6A VS000-4A- AZ78-A- AXT6-9 For increasing the manifold bases, please order the manifold block assembly number of the principal part assembly!0. For plug-in type: The manifold base with terminal stand (integrated with a junction cover) is required with the o junction cover assembly. Note) Manifold Base/Construction: Plug-in with terminal block. No. Description Assembly part no. Component parts Applicable manifold base!0!! 0 Manifold block!0, Terminal i, Metal joint q, w, Manifold block VS000-A-- 0 Gasket e, r, O-ring y, u, Receptacle assembly assembly 0 VS000-A-- Manifold block!0, Metal joint q, w, Gasket e, r, O-ring y, u 0 End plate () VS000-A- End plate (D)!, Metal joint q, w, Gasket e assembly VS000-A- End plate (D)!, Metal joint q, w, Gasket e End plate () assembly VS000-A- VS000-A- End plate (U)!, Metal joint q, w, O-ring t, y End plate (U)!, Metal joint q, w, O-ring t, y -8-68

69 For details about certified products conforming to international standards, visit us at Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S4000 Model position position Type of actuation Single Double Closed center Exhaust center Pressure center Double check Plug-in S400 S400 S400 S4400 S4500 S4600 Model Non plug-in S40 S40 S40 S440 S450 S460 Note ) Based on JIS B 875 (once per 0 days) for the minimum operating frequency. Note ) Based on JIS B (The value at supply press. 0.5 MPa). Note ) The figures in the above list are for without sub-plate. In the case of with plug-in sub-plate and with non plug-in sub-plate, add 0.50 kg and 0.4 kg respectively. Note 4) Note ) and Note ) are with controlled clean air. Compact yet provides a large flow capacity /: C: dm /(s bar) Low power consumption:.8 W DC Easy maintenance types of sub-plates: Plug-in and non plug-in JIS position Single Double position Closed center Exhaust center Pressure center Double check Port size Flow characteristics () 4/ (P A/B) 4/ 5/ (A/B R/R) C C [dm /(s bar)] b Cv [dm /(s bar)] b Cv Standard Specifications Valve specifications Electricity specifications Option Specifications Pilot type Manual override Fluid Maximum operating pressure position Minimum operating pressure position Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power (Power consumption) AC Power consumption DC Electrical entry Inrush Holding ,000, or less 5 or less 50 or less 50 or less 50 or less or less.7 Air/Inert gas.0 MPa 0. MPa 0.5 MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Type E: Dustproof (level 0), Type F: Dripproof (level ), Type D: Splashproof (level 4) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA/50 Hz, 5.0 VA/60 Hz.4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Conduit terminal Grommet terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Main valve Pilot valve Coil rated voltage Porting specifications Option External pilot Note) Direct manual override Non-locking push type (Extended), Locking type (Tool required), Locking type (Lever) 0 to 0, 0, 40 VAC, 50/60 Hz, 00 VDC Bottom ported With light/surge voltage suppressor, Non-rotating DIN terminal Note) Operating pressure: 0 to.0 MPa Pilot pressure position: 0. to.0 MPa, position: 0.5 to.0 MPa () Max. operating cycle (cpm) () Response time (ms) ()(4) Weight (kg) R S S N -8-69

70 Series S Body type O: sub-plate Electrical entry F: conduit terminal Plug-in S How to Order F Porting specifications Nil B Side ported Bottom ported In the case of external pilot (Option), bottom piping is not available. Port size Nil Without sub-plate EA, EB: 8 0 Thread type Nil N T F NPT NPTF G Non plug-in S4 0 E 0 position single 5 position pressure center Option Nil Z P Electrical entry None With light/surge voltage suppressor Non-rotating DIN terminal In the case of w/ Z, enter ZP. Type P is available for DIN type only. E: Grommet terminal D: DIN terminal Pilot valve Manual override Nil: Non-locking push type (Flush) A : Non-locking push type (Extended) position double position double check 6 4 position closed center position exhaust center Reverse pressure: Can be used by external pilot specifications. Body type : sub-plate Pilot type Nil R Coil rated voltage Internal pilot External pilot 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 VDC VDC 40 VAC, 50/60 Hz 9 Other B : Locking type (Tool required) C : Locking type (Lever) How to Order Pilot Valve Assembly SF4 F 0 Body option 0 Standard Direct manual override Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz 9 Other Refer to page -8-5 for voltage conversion. Nil Manual override A B C Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) Locking type (Lever) -8-70

71 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Cylinder Speed Chart System Solenoid valve A B System A B Series S Series S4000 Average speed (mm/s) System Components Speed controller AS40-0 (S = 7 mm ) AS40-04 (S = 97 mm ) Silencer AN00-0 (S = 60 mm ) AN (S = 90 mm ) SGP (Steel pipe) Port size x Length 0A x 5A x Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CA Pressure 0.5 MPa Note) The CA series Series CS has been changed Pressure 0.5 MPa Load factor 50% Stroke 500 mm to the CA series. Load factor 50% Cylinder stroke 000 mm ø50 ø6 ø80 ø00 ø5 ø40 ø60 ø80 ø00 ø50 ø00 Perpendicular, upward actuation Horizontal actuation It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% R S S N Double Check Spacer/Specifications Specifications Can hold an intermediate cylinder position for an extended time If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Double check spacer Double check spacer part no. Applicable valve model Leakage (cm /min) 000-A- S4400-F Solenoid one side energized Solenoid both sides de-energized Supply pressure: 0.5 MPa Caution 000-A- S440-D S440-E In the case of position double check valve (S460), check the leakage from piping and fittings in between valve and cylinder by means of synthetic detergent solutions, and ensure that there is no such leakage found there. Also check the leakage from cylinder seal and piston seal. If there is any leakage, sometimes the cylinder, when valve is de-energized, can move without stopping at intermediate position. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. P P A B EA 0 EB or less EA 0 EB or less EA 0 EB Check Valve Operation SUP side pressure P (MPa) Piston Cylinder side pressure (P) Operating range Check valve SUP side pressure (P) Cylinder side pressure P (MPa) The combination of S4 0 0, S4 0 0 and Double check spacer for prevention of falling at the stroke end but cannot hold the intermediate position of the cylinder. -8-7

72 Series S Construction position single position double position closed center/exhaust center/pressure center Closed center Exhaust center Pressure center Component Parts No. Description q Body w Sub-plate e Spool/Sleeve r Adapter plate t End plate y Piston u Junction cover i Light cover Material Aluminum die-casted Aluminum die-casted Stainless steel Aluminum die-casted Aluminum die-casted Resin Resin Resin Note Platinum silver Platinum silver Black Black Sub-plate Assembly Part No. 0 Plug-in S4000-P Non plug-in S4000-S- 04 Mounting bolt and gasket are not included. Part no. for mounting bolt and gasket BG-S4000 Replacement Parts No. Description Material Part no. S4 S4 S4/44/45 o!0 Return spring Gasket Stainless steel NBR A ! Hexagon socket head screw Steel M4 x 40 M4 x 40 M4 x 40! Detent assembly 4000-A! Pilot valve assembly Refer to How to Order Pilot Valve Assembly on page

73 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Plug-in position single/double, position closed center/exhaust center/pressure center/double check position single: S400-F -ø6.5 mounting hole /8 external pilot port (Only for external pilot) (B), 4(A) port 8 (PE port) Pilot valve manual override (With direct manual override) With light/surge voltage suppressor 07 (FZ) R S G Electrical entry 5-8, (R, R: 8 ) S -ø6.5 mounting hole N 5-8, (R, R: 8 ) Bottom ported position double: S400-F position closed center: S400-F position exhaust center: S4400-F position pressure center: S4500-F position double check: S4600-F -ø6.5 mounting hole 87 ( position: 96.5) -ø6.5 mounting hole With light/surge voltage suppressor Light window Pilot valve manual override With light/surge voltage suppressor Light window 07 (FZ) (With direct manual override) Pilot valve manual override With direct manual override G Electrical entry 5-8, (R, R: 8 ) G Electrical entry 5-8, (R, R: 8 ) -8-7

74 Series S Non Plug-in position single/double, position closed center/exhaust center/pressure center/double check position single: S40-E, S40-D -ø6.5 mounting hole (B), 4(A) port - 8 (PE port) Applicable cabtire cable O.D. ø8 to ø0 Pilot valve manual override G DIN terminal (With direct manual override) 08 (E, EZ) 8.5 (D, DZ) 50.5 (D, DZ) 5-8, (R, R: 8 ) 5-8, (R, R: 8 ) Bottom ported -ø6.5 mounting hole position double: S40-E, S40-D position closed center: S40-E, S40-D position exhaust center: S440-E, S440-D position pressure center: S450-E, S450-D position double check: S460-E, S460-D -ø6.5 mounting hole 87 ( position: 96.5) -ø6.5 mounting hole G DIN terminal Applicable cabtire cable O.D. ø8 to ø0 Pilot valve manual override (With direct manual override) G / DIN terminal 08 (E, EZ) 8.5 (D, DZ) 50.5 (D, DZ) Applicable cabtire cable O.D. ø8 to ø0 Pilot valve manual override 77 (E, EZ) With direct manual overide 08.5 (D, DZ) 0.5 (D, DZ) 5-8, 5-8, (R, R: 8 ) (R, R: 8 ) -8-74

75 75 Series S4000 Manifold Specifications Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be wired at the bottom of terminal block. Terminal block Plug-in Type: With Multi-connector Master connection of power and solenoid valves. Quick wiring permits easier installation. Multi-connector Plug assembly (Option) Refer to page VV5FS4 0T 06 0 Thread type Series S4000 Port size Nil Manifold 0 stations P, R, R A, B N NPT 0 8 T NPTF with terminal block 0 0 stations 04 F G M Mixed For bottom ported, Passage Porting 8 is only available. specifications P R, R (A, B) Side Common Common Bottom VV5FS4 Series S4000 Manifold with multi-connector Connector mounting direction D U mounting mounting 0C D 0 (Wiring specifications: Refer to page -8-8.) 08 8 stations Max. 8 stations Passage P R, R Side Common Common Bottom 05 0 stations Porting specifications (A, B) Thread type Port size P, R, R A, B Nil N NPT 0 8 T NPTF 04 F G M Mixed For bottom ported, 8 is only available. R S S N Plug-in Type With: D-sub Connector Wide range of interchangeability (MIL Spec DIN connector terminal VV5FS4 5 pcs attached.) Quick wiring permits easier Series S4000 installation. Manifold with D-sub connector Connector mounting direction D-sub connector Plug assembly (Option) Refer to page D U (Wiring specifications: Refer to page -8-8.) mounting mounting 0F D 06 0 Thread type Port size Nil 0 stations P, R, R A, B N NPT T 8 stations NPTF 04 F G Max. 8 stations M Mixed For bottom ported, Passage Porting 8 is only available. specifications P R, R (A, B) Side Common Common Bottom Non Plug-in Type: Grommet Terminal, DIN Terminal Wiring for every valve. Grommet terminal DIN terminal VV5FS Series S4000 Port size Manifold 0 stations P, R, R A, B stations 04 M Mixed Passage Porting For bottom ported, specifications 8 is only available. P R, R (A, B) Side Common Common Bottom Thread type Nil N NPT T NPTF F G -8-75

76 Series S How to Order Manifold Assembly Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block: 6 stations (Manifold base) VV5FS4-0T-06-0 ( position single) S400-5FZ ( position double) S400-5FZ (Blanking plate) 000-0A : 6 stations (Manifold base) VV5FS ( position single) S40-5D 5 ( position exhaust center) S440-5D (Individual EXH spacer) 000-R-04- Manifold Specifications Base model VV5FS4-0 VV5FS4-0 Flow Characteristics at the Number of Manifold (Operated individually) Model VV5FS4 Wiring With terminal block With multi-connector With D-sub connector DIN terminal Grommet terminal Porting specifications A, B port Side/ Bottom With multi-connector, or with D-sub connector: 8 stations max. Port size: / Port size P, EA, EB A, B 8, to 0 Applicable valve model S400-F S40-D S40-E Passage/ Station Station 5 Station 0 C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv / (P A/B) 4/ 5/ (A/B R/R) Manifold Option Parts Assembly Individual SUP spacer An individual SUP spacer set on manifold block can form SUP port for every valve. Body type Part no. 000-P P-0- Throttle valve spacer Needle valve set on the manifold block can control cylinder speed by throttling exhaust. Body type Part no A A- Manifold Option With exhaust cleaner /Non Valve exhaust noise dampening: 5 db or more. Oil mist collection: Rate of collection 99.9% or more. Piping process reduced. Individual EXH spacer An individual EXH spacer set on manifold block can form EXH port for every valve. (common EXH type) Body type Part no. 000-R R-04- SUP block disk When supplying manifold with more than two different pressures, high and low, insert a block disk in between stations subjected to Plug-in different pressures. Body type Part no. AXT64-0A EXH block disk When valve exhaust affects the other stations on the circuit or when a reverse pressure valve is used to a standard manifold valve, insert EXH block disk in between stations to separate valve exhaust. Body type Part no. AXT64-A Double check spacer If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Body type Part no. 000-A- 000-A- Interface regulator Interface regulator set on manifold block can regulate the pressure to each valve. (Refer to page -8-6 for Flow Characteristics.) Body type P port regulation ARBF P- ARBF P- A reduced pressure ARBF A- ARBF A- B reduced pressure ARBF B- ARBF B- For details, refer to page With control unit /Non Filter, regulation valve, pressure switch and air release valve are all combined to form one unit. Piping processes are eliminated. For details, refer to page With serial interface unit for serial transmission Solenoid valve wiring process reduced considerably. Disperse installation possible. Manifold solenoid valve: 8 stations max. positions (5 solenoids). Maintenance and inspection are easy. EXH block disk SUP block disk Blanking plate It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc Body type Part no A For details, refer to Serial Transmission catalog separately.

77 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold, (With terminal block): VV5FS4-0T- Station - Port size n- 8 Pilot valve manual override Light n- 8, R Bottom ported: VV5FS4-0T- Station - Port size - 8 (Pilot EXH port: PE) -G 4 Electrical entry - 8 (External pilot port) S S Formula for manifold weight M = 0.565n (kg) n: 6- N : VV5FS4-0- Station - Port size n- 8 Pilot valve manual override Light n- 8, Bottom ported: VV5FS4-0- Station - Port size G Cable ø8 to ø0-8 (Pilot EXH port: PE) - 8 (External pilot port) L Formula for manifold weight M = 0.478n (kg) L L n: Formula L = 4 x n + 70 L = 4 x n / -8-77

78 Series S Manifold with multi-connector/d-sub connector with multi-connector: VV5FS4-0CD- Station - Port size, VV5FS4-0CU- Station - Port size n- 8 Pilot valve manual override Light n- 8, Bottom ported: CD VV5FS4-0 - Station - Port size CU Plug assembly VS000-0A- (Option: Refer to page -8-8.) - 8 (Pilot EXH port: PE) - 8 (External pilot port) Formula for manifold weight M = 0.57n +.0 (kg) n: Station Wiring specifications: Refer to page with D-sub connector: VV5FS4-0FD- Station - Port size, VV5FS4-0FU- Station - Port size n- 8 Pilot valve manual override Light n- 8, Bottom ported: FD VV5FS4-0 - Station - Port size FU Formula for manifold weight M = 0.57n (kg) Wiring specifications: Refer to page Plug assembly VS000-A- (Option: Refer to page -8-8.) - 8 (External pilot port) L L L n: Formula L = 4 x n + 70 L = 4 x n (Pilot EXH port: PE)

79 Manifold with Exhaust Cleaner 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Serves to protect working environment. Valve exhaust noise dampening: 5 db or more. Collection rate of drainage and oil mist: 99.9% or more. Piping work is reduced. Exhaust cleaner (Option) Exhaust cleaner (Option) Caution When using an exhaust cleaner, mount it downwards. Refer to Best Pneumatics Vol. 5 for Exhaust Cleaner details. Manifold Specifications Wiring Manifold : VV5FS4-0 With terminal block With multi-connector With D-sub connector S400-F : VV5FS4-0 DIN terminal Grommet terminal Applicable valve model S40-D, S40-E Common SUP/Common EXH Porting specifications (B), 4(A) port Side: /8, /, Bottom: /8 (Option) (P), (R), 5(R) port P: /, EXH:, / to 0 () Applicable exhaust cleaners AMC60-0 (Connecting port size R ), AMC80-4 (Connecting port size R /) () Note ) With multi-connector, or with D-sub connector: 8 stations max. Note ) of 5 or more and high frequency of operation should be used with AMC80-4. Exhaust cleaners AMC60-0 and AMC80-4 are not attached. VV5FS4 Series S4000 Manifold Base type/electrical entry 0T with terminal block 0C with multi-connector 0F with D-sub connector 0 Connector mounting direction With connector Applicable base Nil None 0T, 0 D mounting 0C, 0F U mounting CD 0 stations 0 0 stations Base type 0T, 0: to 0 stations Base type 0C, 0F: to 8 stations <Example> with terminal block (6 stations) (Manifold base) VV5FS4-0T-06-0-CD ( position single) S400-5FZ ( position double) S400-5FZ (Blanking plate) 000-0A (Exhaust cleaner) AMC60-0 (6 stations) (Manifold base) ( position single) ( position double) (Blanking plate) (Exhaust cleaner) How to Order VV5FS CU S40-5E S40-5E 000-0A AMC80-4 Please indicate manifold base type, corresponding valve, and option parts. Nil N T F Port size P 0 04 M Exhaust cleaner mounting direction CD CU NPT NPTF G mounting mounting Please indicate exhaust cleaner size or port size. Thread type A, B 8 Mixed For bottom ported, 8 is only available. Exhaust Exhaust cleaner mounting direction Passage Porting specifications P R, R (A, B) Side Common Common Bottom R S S N -8-79

80 Series S Manifold with Exhaust Cleaner, : VV5FS4-0T- Station - Port size - CD CU Pilot valve manual override R, 6.5 ( 60) Exhaust cleaner (Option) n- 8, Manual override mounting - 8 (Pilot EXH port: PE) -G 4 Electrical entry - 8 (External pilot port) - mounting ( ): AMC80 : VV5FS4-0- Station - Port size - CD CU Pilot valve manual override R, n- 8, Manual override 6.5 ( 60) Exhaust cleaner (Option) mounting - 8 (Pilot EXH port: PE) - 8 (External pilot port) mounting ( ): AMC80 - L L L n: Formula L = 4 x n + 70 L = 4 x n

81 Manifold with Control Unit 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Control unit (Filter, Regulator, Pressure switch, Air release valve) are all standardized to the one unit, and can be mounted on the manifold base without any attachments. Piping processes are eliminated. Control Unit Specifications Air filter (With auto-drain/with manual drain) Filtration degree 5 µm Regulator Set pressure (Outlet pressure) 0.05 to 0.85 MPa Pressure switch () Set pressure range: OFF 0. to 0.6 MPa Differential 0.08 MPa or less Contact a Indicator light LED (RED) Max. switch capacity VA AC, W DC 4 VAC/DC or less: 50 ma Max. operating current 48 VAC/DC: 40 ma 00 VAC/DC: 0 ma Air release valve (Single only) Operating pressure range 0. to.0 MPa VV5FS4 0C D 08 0 AP Series S4000 Manifold Base type/electrical entry 0T with terminal block Control Unit/Option Air release () valve spacer Pressure switch Blanking plate Filter element <> 000-4A-R ( mounting) <> 000-4A-R ( mounting) IS000P-- Filter regulator Pressure switch Release valve 04-5B MP- MP A-0 Note ) Voltage: 4 VDC to 00 VAC Inner voltage drop: 4 V Note ) Combination of a valve S4 (single) and a release valve spacer can be used as an air release valve. Note ) The non plug-in type cannot be mounted afterwards. Air release valve coil rating Nil None (F, G type only) 00 VAC, 50/60 Hz 5 4 VDC 9 Other 0C with multi-connector Control unit type 0F with D-sub connector 0 Nil A AP M MP F Control equipment Connector mounting direction Air filter with auto-drain G C E With connector Applicable base Air filter with manual drain Nil None 0T, 0 Regulator D mounting Air release valve 0C, 0F U mounting Pressure switch Blanking plate (Air release valve) 0 stations Blanking plate (Filter, Regulator) Blanking plate (Pressure switch) 0 Passage Porting 0 stations specifications Number of manifold blocks P R, R (A, B) required for mounting (stations) Side Common Common Bottom Base type 0T, 0: to 0 stations Base type 0C, 0F: to 8 stations Caution When using an air filter with auto-drain or manual drain, mount the filter vertically. Port size P, R, R A, B 0 04 M Mixed For bottom ported, 8 is only available. Manifold Specifications Wiring Manifold Applicable valve model Porting specifications How to Order Thread type 8 Nil N T F NPT NPTF G : VV5FS4-0 With terminal block With multi-connector With D-sub connector S400-F (B), 4(A) port (P), (R), 5(R) port With multi-connector, or with D-sub connector: 8 stations max. Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block: In order to mount control unit, it requires stations. (Manifold base) ( position single) ( position double) VV5FS4-0T-08-0-AP5 S400-5FZ S400-5FZ 4 : In order to mount control unit, it requires stations. (Manifold base) ( position single) () : VV5FS4-0 DIN terminal Grommet terminal S40-D, S40-E Common SUP, Common EXH Side: /8, /, Bottom: /8 Side: / to 0 VV5FS A S40-5D 4 R S S N -8-8

82 Series S Manifold with Control Unit, : VV5FS4-0T- Station - Port size -AP Voltage for release valve Example for manifold Individual EXH spacer Pilot valve manual override Pilot valve manual override n-, 8 Double check spacer Individual SUP spacer (80.5: -MP) Pressure switch Air release valve Air release valve Air filter regulator Outlet for check Control unit Pressure switch 05-8 Pilot EXH port: PE -G /4 Electrical entry /4 (Po port) (External pilot port) 6- : VV5FS4-0- Station - Port size -AP Voltage for release valve Example for manifold Individual EXH spacer n- 8, Pilot valve manual override Double check spacer Individual SUP spacer (80.5: -MP) Pressure switch Air release valve Air release valve Air filter regulator Pressure switch Outlet for check 05 Control unit - 8 Pilot EXH port: PE 6- /4 (Po port) (External pilot port) L L L L (MP) L (AP) n: Formula L = 4 x n L = 4 x n L = 4 x n L = 4 x n

83 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold Option Parts Individual SUP spacer: 000-P-0- () 000-P-0- (), Double check spacer: 000-A- () 000-A- () (7: With direct manual override) Individual EXH spacer: 000-R-04- () 000-R-04- () (79: With direct manual override) Individual SUP spacer Individual EXH spacer SUP block disk: AXT64-0A EXH block disk: AXT64-A Interface regulator/p port regulation: ARBF P- () ARBF P- () (95: With direct manual override) Interface regulator Double check spacer Interface regulator/a port regulation: ARBF A- () ARBF A- () R S S N Block disk mounting position ( ): EXH block disk (95: With direct manual override) Interface regulator Throttle valve spacer: 000-0A- () 000-0A- () Interface regulator/b port regulation: ARBF B- () ARBF B- () (7: With direct manual override) Throttle valve spacer (95: With direct manual override) Interface regulator -8-8

84 Series S Manifold Base Construction, Non End plate () Manifold block End plate () Replacement Parts No. q w e r t y u i o! Description Connection fitting A Connection fitting B Gasket Gasket Gasket O-ring O-ring Terminal assembly Junction cover assembly Rubber plug Material Steel plate Steel plate NBR NBR NBR NBR NBR For 0T For 0SU NBR Replacement Parts: Sub Assembly Part no. V A V V (End plate) V (Manifold block) V AS568-0 P- V4000-6A V4000-4A- AZ78-0A- AXT6-9 For increasing the manifold bases, please order the manifold block assembly number of the principal part assembly!0. For plug-in type: The manifold base with terminal stand (integrated with a junction cover) is required with the o junction cover assembly. Note) Manifold Base/Construction: with terminal block. No. Description Assembly part no. Component parts Applicable manifold base!0!! Manifold block V4000-A-- 0 Manifold block!0, Terminal i, Metal joint q, w, 04 Gasket r, Receptacle assembly assembly V4000-A-- Manifold block!0, Metal joint q, w, Gasket r 0 04 End plate (D)!, Metal joint q, w, Gasket e, t, V4000-A- End plate () O-ring y, u assembly End plate (D)!, Metal joint q, w, Gasket e, t, V4000-A- O-ring t, y End plate () assembly V4000-A- V4000-A- End plate (U)!, Metal joint q, w End plate (U)!, Metal joint q, w -8-84

85 For details about certified products conforming to international standards, visit us at Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S5000 Model position position Type of actuation Single Double Closed center Exhaust center Pressure center Double check Plug-in S500 S500 S500 S5400 S5500 S600 Model Non plug-in S50 S50 S50 S540 S550 S560 Port size Flow characteristics 4/ (P A/B) 4/ 5/ (A/B R/R) C C [dm /(s bar)] b Cv [dm /(s bar)] b Cv Note ) Based on JIS B 875 (once per 0 days) for the minimum operating frequency. Note ) Based on JIS B (The value at supply pressure 0.5 MPa.) Note ) The figures in the above list are without sub-plate. In the case of with plug-in sub-plate and, with non plug-in sub-plate add /8, /0.744 kg, / kg and /8, /0.577 kg, /40.8 kg respectively. Note 4) Note ) and Note ) are with controlled clean air. Compact yet provides a large flow capacity /4: C: 0 dm /(s bar) Low power consumption:.8 W DC Easy maintenance types of sub-plates: Plug-in and non plug-in JIS position Single Double position Closed center Exhaust center Pressure center Double check Standard Specifications Valve specifications Electricity specifications Fluid Maximum operating pressure Minimum operating pressure Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power (Power consumption) AC Power consumption DC Electrical entry Option Specifications Inrush Holding or less 5 or less 55 or less 55 or less 55 or less 60 or less Air/Inert gas.0 MPa 0. MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Type E: Dustproof (Level 0), Type F: Dripproof (Level ), Type D: Splashproof (Level 4) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA/50 Hz, 5.0 VA/60 Hz.4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Conduit terminal Grommet terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Pilot type Manual override Main valve Pilot valve Coil rated voltage Porting specifications Option Note) Operating pressure: 0 to.0 MPa Pilot pressure: 0. to.0 MPa Max. operating cycle (cpm) Response time (ms) Weight (kg) External pilot Note) Direct manual override Non-locking push type (Extended), Locking type (Tool required), Locking type (Lever) 0 to 0, 0, 40 VAC (50/60 Hz), 00 VDC Bottom ported With light/surge voltage suppressor, Non-rotating DIN terminal () () () R S S N

86 Series S Body type O: sub-plate How to Order Electrical entry F: conduit terminal Porting specifications Nil Side ported B Bottom ported In the case of external pilot (Option), bottom piping is not available. Plug-in S5 0 0 F 04 Port size Nil Without sub-plate Thread type Nil N T F NPT NPTF G Non plug-in S5 0 5 D 06 position single 5 position pressure center Option Nil Z P ZP Electrical entry None With light/surge voltage suppressor Non-rotating DIN terminal Light/Surge Voltage Suppressor Non-rotating DIN terminal Type P, ZP is available for DIN type only. E: Grommet terminal D: DIN terminal Pilot valve Manual override Nil: Non-locking push type (Flush) A : Non-locking push type (Extended) position double position double check position closed center 6 B : Locking type (Tool required) 4 position exhaust center Body type : sub-plate Coil rated voltage VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 VDC VDC 40 VAC, 50/60 Hz 9 Other C : Locking type (Lever) Body option 0 Standard Direct manual override Pilot type Nil R Internal pilot External pilot How to Order Pilot Valve Assembly SF4 Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz 9 Other Refer to page -8-5 for voltage conversion. F 0 Manual override Nil A B C Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) Locking type (Lever) -8-86

87 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Cylinder Speed Chart Series S Conditions S Can hold an intermediate cylinder position for an extended time If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Average speed (mm/s) Tube bore x Length Speed controller Silencer Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CS Pressure 0.5 MPa Load factor 50% Stroke 00 mm ø5 ø40 ø60 ø80 ø00 ø50 ø00 It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% Double check spacer Series CS SGP0A x m AS AN Double Check Spacer/Specifications Specifications Double check spacer part no. Applicable valve model Leakage (cm /min) Caution VS5000-A- S5400-F Solenoid one side energized Solenoid both sides de-energized Supply pressure: 0.5 MPa Perpendicular, upward actuation Horizontal actuation VS5000-A- S540-D S540-E In the case of position double check valve (S560), check the leakage from piping and fittings in between valve and cylinder by means of synthetic detergent solutions, and ensure that there is no such leakage found there. Also check the leakage from cylinder seal and piston seal. If there is any leakage, sometimes the cylinder, when valve is de-energized, can move without stopping at intermediate position. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. P P A B R 0 R or less R 0 R or less R 0 R Check Valve Operation SUP side pressure P (MPa) Piston Cylinder side pressure Operating range The combination of S5 0, S5 0 and a double check spacer can be used as prevention of falling at the stroke end but cannot hold the intermediate position of the cylinder. 0 Check valve SUP side pressure (P) Cylinder side pressure P (MPa) 0 R S S N -8-87

88 Series S Construction position single position double Closed center position closed center/exhaust center/pressure center Exhaust center Pressure center Component Parts No. Description q Body w Sub-plate e Spool/Sleeve r Adapter plate t End plate y Piston u Junction cover i Light cover Material Aluminum die-casted Aluminum die-casted Stainless steel Aluminum die-casted Aluminum die-casted Resin Resin Resin Note Platinum silver Platinum silver Black Black Sub-plate Assembly Part No. 0 Plug-in S5000-P Non plug-in S5000-S Mounting bolt and gasket are not included. Part no. for mounting bolt and gasket BG-S5000 Replacement Parts No. Description Material Part no. S5 S5 S5/54/55 o!0 Return spring Gasket Stainless steel NBR S AXT67-0- AXT67-0- AXT67-8 AXT67-0-! Hexagon socket head screw Steel M5 x 50 M5 x 50 M5 x 50! Detent assembly AXT50-9! Pilot valve assembly Refer to How to Order Pilot Valve Assembly on page

89 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Plug-in position single/double, position closed center/exhaust center/pressure center/double check position single: S500-F -ø7 mounting hole Bottom ported 5- /8, /, /4 (R), 5(R): / Pilot valve manual override With light/surge voltage suppressor Direct manual override /8 external pilot (Port size: /8, /) (B), 4(A) port R S S G / electrical entry 5- /8, /, /4 8 (Pilot EXH port) /8 external pilot (Port size: /4) position double: S500-F position closed center: S500-F position exhaust center: S5400-F position pressure center: S5500-F 9. (8) position 7. (6) -ø7 mounting hole position double check: S5600-F -ø7 mounting hole ( ): 4 N Pilot valve manual override With light/surge voltage suppressor Pilot valve manual override With light/surge voltage suppressor Direct manual override Direct manual override G / electrical entry G / electrical entry 5- /8, /, /4 5- /8, /, /4 ( ): /4 ( ): /4-8-89

90 Series S Non Plug-in position single/double, position closed center/exhaust center/pressure center/double check position single: S50-E, S50-D -ø7 mounting hole 5- /8, /, /4 /4: (R), /: 5(R) G Applicable cabtire cable O.D. ø8 to ø0 Pilot valve manual override /8 external pilot (Port size /8, /) (B), 4(A) port Direct manual override - /8 (Pilot EXH port) /8 external pilot (Port size: /4) 5-8,, 4 position double: S50-E, S50-D position closed center: S50-E, S50-D position exhaust center: S540-E, S540-D position pressure center: S550-E, S550-D ( ): /4 position double check: S560-E, S560-D -ø7 mounting hole 0.5 ( position: 09.5) -ø7 mounting hole G Applicable cabtire cable O.D. ø8 to ø0 G Applicable cabtire cable O.D. ø8 to ø0 Pilot valve manual override Pilot valve manual override Direct manual override Direct manual override 5-8,, 4 5-8,, 4 ( ): /4 ( ): /4-8-90

91 9 Series S5000 Manifold Specifications Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be wired at the bottom of terminal block. VV5FS5 Series S5000 Manifold with terminal block 0T 0 stations Plug-in Type: With Multi-connector (Wiring specifications: Refer to page -8-8.) Master connection of power and solenoid valves. VV5FS5 0C Quick wiring permits easier installation. Series S stations Manifold Multi-connector Plug assembly (Option) Refer to page with multi-connector Connector mounting direction D U 0 0 stations Passage Porting specifications P R, R (A, B) Side Common Common Bottom mounting mounting D stations Max. 8 stations Passage Porting specifications P R, R (A, B) Side Common Common Bottom Port size M 04 Nil P, R, R A, B N T 4 4 F Mixed For bottom ported, is only available. Port size M Nil P, R, R A, B N T 4 4 F Mixed For bottom ported, is only available. Thread type NPT NPTF G Thread type NPT NPTF G R S S N Plug-in Type: With D-sub Connector (Wiring specifications: Refer to page -8-8.) Wide range of interchangeability (MIL Spec. D-sub connector terminal VV5FS5 5 pcs attached.) Quick wiring permits easier Series S5000 installation. Manifold with D-sub connector D-sub connector Non Plug-in Type: Grommet Terminal, DIN Terminal Wiring for every valve. Grommet terminal DIN terminal Plug assembly (Option) Refer to page Connector mounting direction D U mounting mounting VV5FS5 Series S5000 Manifold 0F 0 D 06 0 stations 0 stations stations Max. 8 stations Passage Porting specifications P R, R (A, B) Side Common Common Bottom stations M Passage Porting specifications P R, R (A, B) Side Common Common Bottom 04 Port size M Port size Nil P, R, R A, B N T 4 F 4 Mixed For bottom ported, is only available. P, R, R A, B 4 4 Mixed For bottom ported, is only available. Thread type NPT NPTF G Thread type Nil N T F NPT NPTF G -8-9

92 Series S How to Order Manifold Assembly Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block: 6 stations (Manifold base) VV5FS5-0T ( position single) S500-5FZ ( position double) S500-5FZ (Blanking plate) VS5000-0A : 6 stations (Manifold base) VV5FS ( position single) S50-5D 5 ( position exhaust center) S540-5D (Individual EXH center) VS5000-R-04- Manifold Specifications Base model VV5FS5-0 VV5FS5-0 Wiring With terminal block With multi-connector With D-sub connector DIN terminal Grommet terminal Port size A, B port P, R, R A, B 4, 4 With multi-connector, or with D-sub connector: 8 stations max. S500-F S50-D S50-E Flow Characteristics at the Number of Manifold (Operated individually) Model VV5FS5 Passage/ 4/ (P A/B) 4/ 5/ (A/B R/R) Port size: /, /4 C [dm /(s bar)] 6.0 b 0.0 Cv C [dm /(s bar)] b Cv Porting specifications Side/ Bottom to 0 Applicable valve model Station Station 5 Station Manifold Option Parts Assembly Individual SUP spacer An individual SUP spacer set on manifold block can form SUP port for every valve. Body type Part no. VS5000-P-04- VS5000-P-04- Throttle valve spacer Needle valve set on the manifold block can control cylinder speed by throttling exhaust. Body type Part no. VS5000-0A- VS5000-0A- Manifold Option With exhaust cleaner / Valve exhaust noise dampening: 5 db or more. Oil mist collection: Rate of collection 99.9% or more. Piping process reduced. Individual EXH spacer An individual EXH spacer set on manifold block can form EXH port for every valve. (common EXH type) Body type Part no. VS5000-R-04- VS5000-R-04- SUP block disk When supplying manifold with more than two different pressures, high and low, insert a block disk in between stations subjected to different pressures. Body type Part no. AXT68-A EXH block disk When valve exhaust affects the other stations on the circuit or when a reverse pressure valve is used on a standard manifold valve, insert EXH block disk in between stations to separate valve exhaust. Body type Part no. AXT5-4-A Double check spacer If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Body type Part no. VS5000-A- VS5000-A- Interface regulator Interface regulator set on manifold block can regulate the pressure to each valve. (In the event of using, refer to Flow Characteristics on page -8-6). Body type P port regulation A port regulation B port regulation ARBF P- ARBF A- ARBF B- ARBF P- ARBF A- ARBF B- For details, refer to page With serial interface unit for serial transmission Solenoid valve wiring process reduced considerably. Disperse installation possible. Manifold solenoid valve: 8 stations max. positions (5 solenoids). Maintenance and inspection are easy. For details, refer to Serial Transmission catalog separately. EXH block disk SUP block disk Blanking plate It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. Body type Part no. VS5000-0A -8-9

93 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold, (With terminal block): VV5FS5-0T- Station - Port size Direct manual override Pilot valve manual override Pitch P = 5 n- Bottom ported: VV5FS5-0T- Station - Port size -G 4 Electrical entry Formula for manifold weight M = 0.9n +.6 (kg) n: Station ( ): (B)/4(A) port 4 : VV5FS5-0- Station - Port size (External pilot) 4-8 (Pilot EXH) n- /, /4 R S S N Direct manual override Pilot valve manual override Pitch P = 5 n- DIN terminal VV5FS5-0- Station - Port size G n-, 4 Grommet with terminal Applicable cabtire cable O.D. ø8 to ø (External pilot) 4-8 (Pilot EXH) - 8 (External pilot) 4-8 (Pilot EXH) 6-4 L L L Formula L = 5 x n + 9 L = 5 x n + 0 Formula for manifold weight M = 0.8n +. (kg) n: Station ( ): (B)/4(A) port 4-8-9

94 Series S Manifold with multi-connector/d-sub connector with multi-connector: VV5FS5-0CD- Station - Port size, VV5FS5-0CU- Station - Port size Direct manual override Pilot valve manual override Pitch P = 5 n-, 4 n- Bottom ported: CD VV5FS5-0 - Station - Port size CU Plug assembly VS000-0A- (Option: Refer to page -8-8.) 4-8 (Pilot EXH) - 8 (External pilot) Formula for manifold weight M = 0.96n (kg) n: Station Refer to page For wiring specifications. ( ): (B)/4(A) port 4 with D-sub connector: VV5FS5-0FD- Station - Port size, VV5FS5-0FU- Station - Port size Pilot valve manual override Direct manual override Pitch P = 5 n- n-, 4 Bottom ported: FD VV5FS5-0 - Station - Port size FU Formula for manifold weight M = 0.96n +.6 (kg) n: Station Refer to page For wiring specifications. Plug assembly VS000-A- (Option: Refer to page -8-8.) - 8 (External pilot) 4-8 (Pilot EXH) L L L Formula L = 5 x n + 9 L = 5 x n ( ): (B)/4(A) port

95 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold with Exhaust Cleaner Serves to protect working environment. Valve exhaust noise dampening: 5 db or more. Collection rate of drainage and oil mist: 99.9% or more. Piping work is reduced. Exhaust cleaner (Option) Exhaust cleaner (Option) Manifold Specifications Manifold : VV5FS5-0 : VV5FS5-0 Wiring With terminal blocks DIN terminal With multi-connector With D-sub connector Grommet terminal Applicable valve model S500-F S50-D, S50-E Common SUP/Common EXH Porting specifications (B), 4(A) port Side: RC /, /4, Bottom: / (Option) (P), (R), 5(R) port P: /4, EXH: / to 0 () Applicable exhaust cleaners AMC80-4 (Connecting port size R /) () Note ) With multi-connector, or with D-sub connector: 8 stations max. Note ) Exhaust cleaner: Not attached. VV5FS5 Series S5000 Manifold Base type/electrical entry 0T with terminal block 0C with multi-connector 0F with D-sub connector 0 Connector mounting direction With connector Applicable base Nil None 0T, 0 D mounting 0C, 0F U mounting How to Order CD 0 stations 0 0 stations Base type 0T, 0: to 0 stations Base type 0C, 0F: to 8 stations Thread type Nil N T F Port size M P 4 NPT NPTF G Exhaust cleaner mounting direction CD CU A, B 4 Mixed Exhaust cleaner mounting direction mounting mounting For bottom ported, is only available. Passage Porting specifications P R, R (A, B) Side Common Common Bottom R S S N Caution When using an exhaust cleaner, mount it downwards. Refer to Best Pneumatics Vol. 5 for Exhaust Cleaner details. Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block (6 stations) (Manifold base) VV5FS5-0T CD ( position single) S500-5FZ ( position double) S500-5FZ (Blanking plate) VS5000-0A (Exhaust cleaner) AMC80-4 (6 stations) (Manifold base) ( position single) ( position double) (Blanking plate) (Exhaust cleaner) VV5FS CU S50-5E S50-5E VS5000-0A AMC

96 Series S Manifold with Exhaust Cleaner, : VV5FS5-0T- Station - Port size - CD CU Direct manual override Pilot valve manual override n-, 4 R 50 AMC80-4 Exhaust cleaner (Option) mounting -G /4 Electrical entry mounting - /4 ( ): (B)/4(A) port /4 : VV5FS5-0- Station - Port size - CD CU Direct manual override Pilot valve manual override n-, 4 R Exhaust cleaner (Option) mounting mounting 4-8 ( ): (B)/4(A) port /4-4 L L L n: Formula L = 5 x n + 9 L = 5 x n

97 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Manifold Option Parts Individual SUP spacer: VS5000-P-04- () VS5000-P-04- (), Double check spacer: VS5000-A- () VS5000-A- () Individual SUP spacer Double check spacer Individual EXH spacer: VS5000-R-04- () VS5000-R-04- () Interface regulator/p port regulation: ARBF P- () ARBF P- () R S S Individual EXH spacer Interface regulator SUP block disk: AXT68-A EXH block disk: AXT5-4-A Interface regulator/a port regulation: ARBF A- () ARBF A- () N Interface regulator Block disk mounting position ( ) : SUP block disk Throttle valve spacer: VS5000-0A- () VS5000-0A- () Interface regulator/b port regulation: ARBF B- () ARBF B- () Interface regulator Throttle valve spacer -8-97

98 Series S Manifold Base Construction, End plate () Manifold block End plate () Replacement Parts No. q w e r t y u i o! Description Connection fitting A Connection fitting B O-ring O-ring O-ring O-ring O-ring Terminal assembly Junction cover assembly Rubber plug Material Steel plate Steel plate NBR NBR NBR NBR NBR For 0T For 0SU NBR Replacement Parts: Sub Assembly No.!0!! Description Manifold block assembly End plate () assembly End plate () assembly Part no. AXT68-6-A AXT68-6- AS AS AS568-0 AS568-0 AS AXT68-5-A VS5000-4A- AZ78-A- AXT6-9 Assembly part no. VS5000-A-- VS5000-A-- VS5000-A- VS5000-A- VS5000-A- VS5000-A For increasing the manifold bases, please order the manifold block assembly number of the principal part assembly!0. For plug-in type: The manifold base with terminal stand (integrated with a junction cover) is required with the o junction cover assembly. Note) Manifold Base/Construction: with terminal block. Component parts Manifold block!0, Metal joint q, w, Terminal i, O-ring e, r, t, y, u, Receptacle assembly Manifold block!0, Metal joint q, w, O-ring e, r, t, y, u End plate (U)!, Metal joint q, w End plate (U)!, Metal joint q, w End plate (D)!, Metal joint q, w, O-ring e, r, t, y, u End plate (D)!, Metal joint q, w, O-ring e, r, t, y, u Applicable manifold base -8-98

99 For details about certified products conforming to international standards, visit us at Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S6000 Model position Type of actuation Plug-in Model Non plug-in Port size 4 Single S600 S or less.5 4 Double S600 S or less.75 Note ) Based on JIS B (once per 0 days) for the min. operating frequency. Note ) According to JIS B (The value at supply pressure 0.5 MPa.) Note ) The figures in the above list are for without sub-plate. In case of with sub-plate, add.65 kg for /4 and.5 kg for RC respectively. Note 4) Note ) and Note ) are with controlled clean air. Note 5) The flow characteristics is for the port size 4/. Compact yet provides a large flow capacity /4: C: 8 dm /(s bar) Low power consumption:.8 W DC Easy maintenance types of sub-plates: Plug-in and non plug-in JIS position Single Double Flow characteristics 4/ (P A/B) 4/ 5/ (A/B R/R) C C [dm /(s bar)] b Cv [dm /(s bar)] b Cv Standard Specifications Valve specifications Electricity specifications Fluid Maximum operating pressure Minimum operating pressure Proof pressure Ambient and fluid temperature Lubrication Pilot valve manual override Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power AC (Power consumption) Power consumption DC Electrical entry Option Specifications Inrush Holding Air/Inert gas.0 MPa 0. MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s () Type E: Dustproof (Level 0), Type F: Dripproof (Level ), Type D: Splashproof (Level 4) (4) 00, 00 VAC, 50/60 Hz; 4 VDC 5 to +0% of rated voltage Class B or equivalent (0 C) (5) 5.6 VA/50 Hz, 5.0 VA/60 Hz.4 VA (. W)/50 Hz,. VA (.5 W)/60 Hz.8 W (.04 W: With light/surge voltage suppressor) Conduit terminal Grommet terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG), if lubricated. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note 4) Based on JIS C 090. Note 5) Based on JIS C 400. Pilot type Manual override Main valve Coil rated voltage Porting specifications Option Note) Operating pressure: 0 to.0 MPa Pilot pressure: 0. to.0 MPa Note) Max. operating cycle (cpm) Response time (ms) Weight (kg) External pilot Direct manual override 0 to 0, 0, 40 VAC (50 Hz/60 Hz), 00 VDC Bottom ported With light/surge voltage suppressor, Non-rotating DIN terminal () () () R S S N -8-99

100 Series S How to Order Body type O: sub-plate Electrical entry F: conduit terminal Porting specifications Nil B Side ported Bottom ported In the case of external pilot (Option), bottom piping is not available. Port size Nil Without sub-plate Thread type Nil N T F NPT NPTF G Plug-in S F Z 0 Non plug-in S6 0 5 D Z 0 position single Option Nil Z Electrical entry None With light/surge voltage suppressor E: Grommet terminal D: DIN terminal position double : sub-plate Body type Body Option 0 Standard Direct manual override Pilot type Nil R Coil rated voltage Internal pilot External pilot 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 VDC VDC 40 VAC, 50/60 Hz 9 Other How to Order Pilot Valve Assembly SF4 F Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz 9 Other Refer to page -8-5 for voltage conversion

101 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Series S Cylinder Speed Chart Series S600-0 Conditions S600-0 Construction Average speed (mm/s) Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CS Pressure 0.5 MPa Load factor 50% Stroke 00 mm ø5 ø40 ø60 ø80 ø00 ø50 ø00 It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% Series CS Tube bore x Length SGP5A x m Speed controller AS600-0 Silencer AN600-0 Perpendicular, upward actuation Horizontal actuation position single position double R S S N Component Parts No. Description Material Note q w e Body Sub-plate Spool/Sleeve Aluminum die-casted Aluminum die-casted Stainless steel Platinum silver Platinum silver r Adapter plate Aluminum die-casted Black t End plate Aluminum die-casted Black y Piston Resin u Junction cover Resin i Light cover Resin Replacement Parts No. o!0!! Description Material Sub-plate Assembly Part No. Part no. Plug-in S6000-P Non plug-in S6000-S- 0 Mounting bolt and gasket are not included. Part no. for mounting bolt and gasket BG-S6000 S6 S6 Return spring Stainless steel S Gasket NBR S S Detent assembly S6000-8A Pilot valve assembly Refer to How to Order Pilot Valve Assembly on page