Manifold Specifications

Transcription

1 Specifications Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be wired at the bottom of terminal block. VV5FS5 with terminal block 0T 0 stations Plug-in Type: With Multi-connector (Wiring : Refer to page ) Master connection of power and solenoid valves. VV5FS5 0C Quick wiring permits easier installation. 0 stations Multi-connector Plug assembly Refer to page with multi-connector Connector mounting direction D U 0 0 stations 0 Passage Porting P R, R (A, B) Side Common Common Bottom mounting mounting D stations Max. 8 stations Passage Porting P R, R (A, B) Side Common Common Bottom Port size 0 M 0 Nil P, R, R A, B N T 3 3 F Mixed For bottom ported, is only available. Port size 0 M Nil P, R, R A, B N T 3 3 F Mixed For bottom ported, is only available. Thread type NPT NPTF G Thread type NPT NPTF G VK VZ VF VFR VP VZS VFS VS VQ7 EVS VFN Plug-in Type: With D-sub Connector (Wiring : Refer to page ) Wide range of interchangeability (MIL Spec. D-sub connector terminal VV5FS5 5 pcs attached.) Quick wiring permits easier installation. with D-sub connector D-sub connector Non Plug-in Type: Grommet Terminal, DIN Terminal Wiring for every valve. Grommet terminal DIN terminal Plug assembly Refer to page Connector mounting direction D U mounting mounting VV5FS5 0F 0 D 0 stations 0 stations stations Max. 8 stations Passage Porting P R, R (A, B) Side Common Common Bottom stations M Passage Porting P R, R (A, B) Side Common Common Bottom 0 Port size 0 M Port size 0 Nil P, R, R A, B N T 3 3 F Mixed For bottom ported, is only available. P, R, R A, B 3 3 Mixed For bottom ported, is only available. Thread type NPT NPTF G Thread type Nil N T F NPT NPTF G 3-8-9

2 How to Order Assembly Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block: 6 stations ( base) VV5FS5-0T--0 ( position single) VFS500-5FZ 3 ( position double) VFS500-5FZ (Blanking plate) VVFS5000-0A : 6 stations ( base) VV5FS ( position single) VFS50-5D 5 (3 position exhaust center) VFS50-5D (Individual EXH center) VVFS5000-R-0- Specifications Base model VV5FS5-0 VV5FS5-0 Wiring With terminal block With multi-connector With D-sub connector DIN terminal Grommet terminal Port size A, B port P, R, R A, B 3, 3 With multi-connector, or with D-sub connector: 8 stations max. VFS5 00- F VFS5 0- D VFS5 0- E Flow Characteristics at the Number of (Operated individually) Model VV5FS5 Passage/ / (P A/B) / 5/3 (A/B R/R) Port size: /, 3/ C [dm 3 /(s bar)] 6.0 b 0.0 Cv C [dm 3 /(s bar)] b Cv Porting Side/ Bottom to 0 Applicable valve model Station Station 5 Station Option Parts Assembly Individual SUP spacer An individual SUP spacer set on manifold block can form SUP port for every valve. VVFS5000-P-0- VVFS5000-P-0- Throttle valve spacer Needle valve set on the manifold block can control cylinder speed by throttling exhaust. VVFS5000-0A- VVFS5000-0A- Option With exhaust cleaner / Valve exhaust noise dampening: 35 db or more. Oil mist collection: Rate of collection 99.9% or more. Piping process reduced. Individual EXH spacer An individual EXH spacer set on manifold block can form EXH port for every valve. (common EXH type) VVFS5000-R-0- VVFS5000-R-0- SUP block disk When supplying manifold with more than two different pressures, high and low, insert a block disk in between stations subjected to different pressures. AXT68-A EXH block disk When valve exhaust affects the other stations on the circuit or when a reverse pressure valve is used on a standard manifold valve, insert EXH block disk in between stations to separate valve exhaust. AXT5--A Double check spacer If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. VVFS5000-A- VVFS5000-A- Interface regulator Interface regulator set on manifold block can regulate the pressure to each valve. (In the event of using, refer to Flow Characteristics on page 3-8-6). P port regulation A port regulation B port regulation ARBF P- ARBF A- ARBF B- ARBF P- ARBF A- ARBF B- For details, refer to page With serial interface unit for serial transmission Solenoid valve wiring process reduced considerably. Disperse installation possible. solenoid valve: 8 stations max. 3 positions (5 solenoids). Maintenance and inspection are easy. For details, refer to Serial Transmission catalog separately. EXH block disk SUP block disk Blanking plate It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. VVFS5000-0A 3-8-9

3 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in, (With terminal block): VV5FS5-0T- Station - Port size Direct manual override Pilot valve manual override VK VZ Pitch P = 5 n- Bottom ported: VV5FS5-0T- Station - Port size -G Electrical entry Formula for manifold weight M = 0.9n +.6 (kg) n: Station ( ): (B)/(A) port 3 : VV5FS5-0- Station - Port size (External pilot) - 8 (Pilot EXH) n- /, 3/ VF VFR VP VZS VFS VS VQ7 EVS VFN Direct manual override Pilot valve manual override Pitch P = 5 n- DIN terminal VV5FS5-0- Station - Port size G n-, 3 Grommet with terminal Applicable cabtire cable O.D. ø8 to ø (External pilot) - 8 (Pilot EXH) - 8 (External pilot) - 8 (Pilot EXH) 6-3 L L L Formula L = 5 x n + 9 L = 5 x n + 0 Formula for manifold weight M = 0.8n +.3 (kg) n: Station ( ): (B)/(A) port

4 with multi-connector/d-sub connector with multi-connector: VV5FS5-0CD- Station - Port size, VV5FS5-0CU- Station - Port size Direct manual override Pilot valve manual override Pitch P = 5 n-, 3 n- Bottom ported: CD VV5FS5-0 - Station - Port size CU Plug assembly VVFS000-30A- (Option: Refer to page ) - 8 (Pilot EXH) - 8 (External pilot) Formula for manifold weight M = 0.96n (kg) n: Station Refer to page For wiring. ( ): (B)/(A) port 3 with D-sub connector: VV5FS5-0FD- Station - Port size, VV5FS5-0FU- Station - Port size Pilot valve manual override Direct manual override Pitch P = 5 n- n-, 3 Bottom ported: FD VV5FS5-0 - Station - Port size FU Formula for manifold weight M = 0.96n (kg) n: Station Refer to page For wiring. Plug assembly VVZS3000-A- (Option: Refer to page ) - 8 (External pilot) - 8 (Pilot EXH) L L L Formula L = 5 x n + 9 L = 5 x n ( ): (B)/(A) port

5 with Exhaust Cleaner 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Serves to protect working environment. Valve exhaust noise dampening: 35 db or more. Collection rate of drainage and oil mist: 99.9% or more. Piping work is reduced. Specifications : VV5FS5-0 : VV5FS5-0 Wiring With terminal blocks DIN terminal With multi-connector With D-sub connector Grommet terminal Applicable valve model VFS5 00- F VFS5 0- D, VFS5 0- E Common SUP/Common EXH Porting (B), (A) port Side: RC /, 3/, Bottom: / (P), 3(R), 5(R) port P: 3/, EXH: / to 0 () Applicable exhaust cleaners AMC80- (Connecting port size R /) () Note ) With multi-connector, or with D-sub connector: 8 stations max. Note ) : Not attached. VV5FS5 Base type/electrical entry 0T with terminal block 0C with multi-connector 0F with D-sub connector 0 Connector mounting direction With connector Applicable base Nil None 0T, 0 D mounting 0C, 0F U mounting How to Order 0 0 CD 0 stations 0 0 stations Base type 0T, 0: to 0 stations Base type 0C, 0F: to 8 stations Thread type Nil N T F Port size 0 M P 3 NPT NPTF G mounting direction CD CU A, B 3 Mixed mounting direction mounting mounting For bottom ported, is only available. Passage Porting P R, R (A, B) Side Common Common Bottom VK VZ VF VFR VP VZS VFS VS VQ7 EVS VFN Caution When using an exhaust cleaner, mount it downwards. Refer to Best Pneumatics Vol. 5 for Exhaust Cleaner details. Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block (6 stations) ( base) VV5FS5-0T--0-CD ( position single) VFS500-5FZ ( position double) VFS500-5FZ (Blanking plate) VVFS5000-0A () AMC80- (6 stations) ( base) ( position single) ( position double) (Blanking plate) () VV5FS CU VFS50-5E VFS50-5E VVFS5000-0A AMC

6 with Exhaust Cleaner, : VV5FS5-0T- Station - Port size - CD CU Direct manual override Pilot valve manual override n-, 3 R 50 AMC80- mounting -G / Electrical entry mounting - 3/ ( ): (B)/(A) port 3/ : VV5FS5-0- Station - Port size - CD CU Direct manual override Pilot valve manual override n-, 3 R mounting mounting - 8 ( ): (B)/(A) port 3/ - 3 L L L n: Formula L = 5 x n + 9 L = 5 x n

7 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Option Parts Individual SUP spacer: VVFS5000-P-0- () VVFS5000-P-0- (), Double check spacer: VVFS5000-A- () VVFS5000-A- () Individual SUP spacer Double check spacer VK VZ VF Individual EXH spacer: VVFS5000-R-0- () VVFS5000-R-0- () Interface regulator/p port regulation: ARBF P- () ARBF P- () VFR VP VZS VFS Individual EXH spacer Interface regulator VS VQ7 EVS SUP block disk: AXT68-A EXH block disk: AXT5--A Interface regulator/a port regulation: ARBF A- () ARBF A- () VFN Interface regulator Block disk mounting position ( ) : SUP block disk Throttle valve spacer: VVFS5000-0A- () VVFS5000-0A- () Interface regulator/b port regulation: ARBF B- () ARBF B- () Interface regulator Throttle valve spacer

8 Base Construction, End plate () block End plate () Replacement Parts No. q w e r t y u i o!3 Description Connection fitting A Connection fitting B O-ring O-ring O-ring O-ring O-ring Terminal assembly Junction cover assembly Rubber plug Material Steel plate Steel plate For 0T For 0SU Replacement Parts: Sub Assembly No.!0!! Description block assembly End plate () assembly End plate () assembly AXT68-6-A AXT68-6- AS568-0 AS AS AS568-0 AS568- AXT68-5-A VVFS5000-A- AZ738-3A- AXT336-9 Assembly part no. VVFS5000-A-- VVFS5000-A-- VVFS5000-A- VVFS5000-A- VVFS5000-3A- VVFS5000-3A- 0 0 For increasing the manifold bases, please order the manifold block assembly number of the principal part assembly!0. For plug-in type: The manifold base with terminal stand (integrated with a junction cover) is required with the o junction cover assembly. Note) Base/Construction: with terminal block. Component parts block!0, Metal joint q, w, Terminal i, O-ring e, r, t, y, u, Receptacle assembly block!0, Metal joint q, w, O-ring e, r, t, y, u End plate (U)!, Metal joint q, w End plate (U)!, Metal joint q, w End plate (D)!, Metal joint q, w, O-ring e, r, t, y, u End plate (D)!, Metal joint q, w, O-ring e, r, t, y, u Applicable manifold base

9 .76 S OLENOID VALVES S ERIES NVFS H O W T O O R D E R NVFS5000 NVFS 5 0 F P OSITION Position Single Position Double 3 3 Position Closed Center 3 Position Exhaust Center 5 3 Position Pressure Center 6 3 Position Perfect B ODY T YPE 0 Plug-In Type P ORTING - Side *B Bottom Note) */8 NPTF Only P ORT S IZE - Without Subplate 03T 3/8 NPTF 0T / NPTF T 3/ NPTF M ANUAL O PTION 0 Standard Std & Direct Manual (Special Order) P ILOT O PERATOR - Internal R External (Special Order) V OLTAGE 00VAC (Special Order) 00VAC (Special Order) 3 0VAC 0VAc 5 VDC 6 VDC 9 Others (Special Order) E LECTRICAL E NTRY F Through Base M ANUAL O VERRIDE - Non Locking Push Type (Flush) *A Non Locking Push Type (Extended) B Lock Type (Screw Type) *C Lock Type (Lever) Note) * Special Order O PTIONS - None Z With Indicator Light and Surge Voltage Suppressor H O W T O O R D E R M ANIFOLD FOR FURTHER TECHNICAL DETAILS ON THIS PRODUCT, REQUEST CATALOG REFERENCE N33

10 S OLENOID VALVES S ERIES NVFS.77 H O W T O O R D E R M ANIFOLD / OPTION P ARTS ASSEMBLY FOR FURTHER TECHNICAL DETAILS ON THIS PRODUCT, REQUEST CATALOG REFERENCE N33