5 Port Solenoid Valve/Direct Poppet. Valve model VK3120. VK3120Y (Low wattage 2W DC) VK3140 VK3140Y (Low wattage 2W DC)

Transcription

1 Port Solenoid Valve/Direct Poppet Rubber seal Series VK3000 Nl/min 147 Compact/Width 18 X Length 8 (mm) Low power consumption 4W DC (Standard) 2W DC (Energy saver) Standard copper free specification All the parts in contact with fluid are noncopper materials JIS Symbol Body ported Plug position Type Base mounted Body ported B port N.C. Base mounted Mounting with VK300 VK300 series can to be mounted on the same manifold base VVK3 of VK3000 series. Refer to the p.1.4 for the details. Usage as 3 port vale VK3000 series can be used as 3 port valve, as a N.C. or N.O. type, by plugging either A or B cylinder port. Make sure not to plug the exhaust port R. A port N.O. Model Body ported Base mounted (with subplate) Valve model VK31 VK31Y (Low wattage 2W DC) Y (Low wattage 2W DC) Operating pressure range (MPa) 0 to 0.7 Port size M 1 8 M 1 8 Effective area (mm 2 ) (Nl/min) 2.7(147) 3.1(1) 1.8(98) 2.2(117) 2.(137) 2.0(107) Value for unit. In case of manifolds, it varies depending on operating conditions. Specifications Style Fluid Ambient and operating fluid temperature Response time at 0.MPa (1) Manual override Lubrication Mounting orientation Impact/Vibration resistance (2) Protective construction 1 8 Weight (g) Single, 2 position, single solenoid Air 0 C max. 10ms or less (Standard), 1ms or less (Low wattage) Nonlocking push style Not required (If required, use tubin oil class 1 ISO VG32) Free 300/0m/s 2 Dust proof Note 1) According to Dynamic performance test JIS B (Coil temperature C, at rated voltage, without surge suppressor) Note 2) Impact resistance: No malfunction from test using drop impact tester, to axis and right angle direction of main valve and armature, each one time when energized and deenergized. Vibration resistance: No malfunction from test with 8.3 to 00 Hz 1 sweep, to axis and right angle direction of main valve and armature, each one time when energized and deenergized. (Valve in the initial Stage.) Solenoid Specifications Electrical entry Rated voltage Allowable voltage Phase voltage(ac) Power consumption(dc) Surge voltage suppressor Indicator light At the rated voltage AC DC Inrush Holding W/o light W/ light AC DC AC DC DIN terminal (D) 100V, 110V, 0V, 2V, 240V, 0/0 Hz 12V, 24V ±10% of rated voltage 9.VA/0Hz, 8VA/0Hz 7VA/0Hz, VA/0Hz 4W (Standard), 2W (Low wattage) 4.3W (Standard), 2.3W (Low wattage) Varistor Diode (12V DC or less: Varistor) Neon light LED SV SY SY SYJ SX VK VZ VF VFR VP7 VC S V V4 V VZ VD VFS VS VS7 V7 JIS Symbol 1.1

2 How to Order Rated voltage 1 100V AC 0/0Hz 2 0V AC 0/0Hz 3 110V AC 0/0Hz 4 2V AC 0/0Hz 24V DC 12V DC 7 240V AC 0/0Hz 9 Others,less than 20VCA, and 0 VDC Electrical entry DDIN terminal DODIN terminal Without connector Option F None With bracket (Not assembled) Order Made Contact SMC for other voltages (9) Ordering source area code Code areas Japan, Asia E Europe Port size (P, A and B ports) M M R1, R2: M Body ported VK31 1 D M Option Part No. Description Part No. Note Bracket VK300432A Manifold gasket VK30001A VK30002A With screw With screw for body ported With screw for base mounted Base mounted 1 D 01 Valve option Standard Y Low wattage (2W DC) Option Protective class class I (Mark: ) DIN terminal type Port size (With subplate) Without subplate Light and surge voltage suppressor None S With surge voltage suppressor Z With light and surge voltage suppressor (Available only for D type.) Light is built in the connector, thus is not available for "DO" type. Thread F N T Rc (PT) G (PF) NPT NPTF Construction JIS Symbol Component Parts No. q w e r t y Description Body Cover End cover Spool valve ass'y Return spring Molded coil Material Aluminium die cast Resin Resin Alluminium, NBR Stainless steel Resin Note Platinum silver paint Black Black Black 1.2

3 Series VK3000 Manifold VK334 VVK30 A, B port: 1/8, M A port: M B port: M A port: 1/8, M VK31 VK332 VVK3400M Common SUP/Common EXH Type/Body Ported How to Order (A, B port top piping) 40 Type/Base Mounted (A, B port bottom piping) 41 Type/Base mounted (A, B port side piping) A port: M B port: M S41 Type B port: M A port: M VK334 VK334 Specifications Number of valve stations Common SUP, Common EXH Piping method Common SUP, Individual EXH VVK3 Ordering source area code Code areas Japan, Asia E Europe How to Order VVK Stations 01 1 station Ordering source area code Code E How to Order areas Japan, Asia Europe VVK3 Ordering source area code Code Common SUP/Common EXH 42 Type/Base mounted How to Order (A, B port side piping) A port: 1/8 B port: 1/8 Common SUP/Individual EXH 21 Type/Body ported style How to Order (A, B port top piping) A, B port: 1/8, M B port: 1/8 A port: 1/8 VK334 VK334 A port: 1/8, M S42 Type VK31 VK332 R1 port: M R2 port: M E Solenoid position Solenoid on opposite side of A and B port Solenoid on same S side of A and B port areas Japan, Asia Europe VVK3 VVK stations 0 M Stations 01 1 station Stations 01 1 station 42 stations Solenoid position Solenoid on opposite side of A and B port S Solenoid on same side of A and B port Ordering source area code Stations Code areas 01 1 station Japan, Asia stations E Europe 0 Ordering source area code Code areas Japan, Asia Stations 01 1 station E Europe stations stations 1 to Body ported, Base mounted Body ported Applicable solenoid valve VK31 M VK31 01 VK332 M VK Thread (P, R port) 00F Rc (PT) G (PF) Applicable blank plate ass y VK300071A 00N NPT 00T NPTF 0 M 0 01 Applicable solenoid valve VK334 Applicable blank plate ass y Thread VK300071A Rc (PT) F G (PF) N NPT T NPTF Thread Rc (PT) F G (PF) N NPT T NPTF Port size Applicable solenoid valve M M C4 ø4 cassette VK334 Applicable blank plate ass y VK300071A Port size 01 1/8 C ø cassette Thread(P port) Rc (PT) 00F G (PF) 00N NPT 00T NPTF Applicable solenoid valve VK334 Applicable blank plate ass y Thread VK300071A Rc (PT) F G (PF) N NPT T NPTF Applicable solenoid valve VK31 M VK31 01 VK332 M VK Applicable blank plate ass y VK300071A 1.3 SV SY SY SYJ SX VK VZ VF VFR VP7 VC S V V4 V VZ VD VFS VS VS7 V7

4 Combination of Solenoid Valve, Manifold Gasket and Manifold Base Combination of Blank Plate Ass'y and Manifold Base Blank plate ass y: VK300071A Applicable base VVK3 Manifold base VVK321 Applicable base VK Subplate VVK340 VVK3(S)41 Manifold base VVK3(S)42 Applicable base: Common to all VVK3 models Note) Mounting direction is not flexible. Make sure to mount them in the right direction. Mixed Mounting of VK300 and Manifold Base of Series VK3000 VVK3 VVK340 In case of VVK3/40 When installing the 3 port valve on the manifold base, plug the R port at the corresponding mark side with the rubber plug (VK300081) as shown in the figures on the right. Other manifolds 3 port valve except VVK3 and 40 types can be mounted without any work. Note 1) Remove the plug If changing the 3 port valve to a port valve. Note 2) In case a 3 port valve VK300 is mounted on the manifold base for a port valve VK3000, switching type is normally closed (N.C.). If requiring a normally open type (N.O.), plug the A port on the port valve. Note 3) A port of a 3 port valve for base mounted type becomes A port of a port valve. Plug that A port to avoid mistaking B port for the A port. 1.4

5 Body Ported Grommet: VK31 GM Port size: M DIN terminal: VK31 DM SV SY SY SYJ SX VK VZ VF VFR VP7 Grommet: VK31 G01 Port size: 1/8 DIN terminal: VK31 D01F VC S V V4 V VZ VD VFS VS VS7 V7 1.

6 Base Mounted Grommet: G01 DIN terminal: D01 1.

7 Type Manifold Body ported (Top piping) VVK3 Station n1= Number of VK3000 n2= Number of VK300 Grommet: G DIN terminal: D SV SY SY SYJ SX VK VZ VF VFR VP7 L: Dimensions Table L n 1 2 L1 0 9 L Type Manifold VVK3 21 Station Body ported (Top piping) Grommet: G n: Number of stations DIN terminal: D VC S V V4 V VZ VD VFS VS VS7 V7 n1= Number of VK3000 n2= Number of VK300 L: Dimensions Table L n 1 2 L L n: Number of stations

8 40 Type Manifold VVK340 Station M Base mounted (Bottom piping) Grommet: G DIN Terminal: D L L: Dimensions Table L1 L2 n n: Number of stations Precautions Be sure to read before handling. Refer to p.033 to 03 for Safety Instructions and common precautions for the products mentioned in this catalogue. Caution 1. How to use DIN type connector Refer to the p Light and surge voltage suppressor Refer to the p How to calculate flow rate Refer to the p

9 41 Type Manifold Base mounted (Side piping) VVK341 Station M Grommet: G DIN Terminal: D SV SY SY SYJ SX VK VZ VF VFR VP7 With builtin Onetouch fitting: VVK341 Station C4 Solenoid is at the same side as A port: VVK3S41 Station VC S V V4 V VZ VD VFS VS VS7 V7 Refer to the above drawings for the dimensions of DIN terminal style. Refer to the above drawings for other dimensions. L L1 L2 n

10 42 Type Manifold Base mounted (Side piping) VVK342 Station 01 Grommet: G DIN Terminal: D With builtin Onetouch fitting: VVK342 Station C Solenoid is at the same side as A port: VVK3S42 Station L L1 L2 n Refer to the above drawings for the dimensions of DIN terminal style Refer to the above drawings for other dimensions