ISO Interface Solenoid Valve/SIZEq Metal Seal. Standard Specifications. Fluid Operating pressure. Ambient and fluid temperature

Transcription

1 ISO Interface Solenoid Valve/SIZEq Metal Seal SeriesVS7-6 VS7-6-FPG-D VS7-6-FG-D Accessories Mounting bolt (with washer) Packing Indicator Iight Optional Specifications VS7-6-FG-S Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. TA-B-5 X 35 AXT (Option) VS7-6-FHG-D Surge voltage Available suppressor Reverse R1/R port: Pressure in pressure R1=P1 pressure R=P pressure, P1=P < position 3 position Option Single solenoid (FG-S) Double solenoid (FG-D) Reverse pressure (YZ-S) Reverse pressure (YZ-D) Closed centre (FHG-D) Exhaust centre (FJG-D) Double pilot check (FPG-D) Pressure centre (FLG-D) Standard Specifications Fluid Operating pressure Ambient and fluid temperature Manual override Electrical entry Lubrication Part No. Rated voltage (V) Inrush current (A) Holding current (A) Allowable voltage (V) Insulation Interface regulator model (1) Applicable solenoid valve Regulation port Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Pressure gauge port size Weight (kg) Air supply side eff. area S (P=0.7MPa, P1=0.5MPa) () (mm ) Air exhaust side eff. area S (P=0.5MPa) () No. of positions (Single) (Double) 3 (Closed centre) 3 (Exhaust centre) 3 (Pilot check) A A A A AXT511 B-1 (V) AXT511 B- (V) AXT511 B-3 (V) AXT511 B-4 (V) 0V AC 50/60 Hz 00V AC 50/60 Hz 4V DC 1V DC 0.049/ / / / to 1% of rated voltage Class B (130 o C) or equivalent A: With -M4 X 46 bolts for position valve, B: With -M4 X 54 bolts for 3 position valve Note) Based on JIS C4003. (V): Pilot EXH individual style. Model VS7-6-FG-S- -Q VS7-6-FG-D- -Q VS7-6-FHG-D- -Q VS7-6-FJG-D- -Q VS7-6-FPG-D- -Q Effective area (With 1 4 sub-plate) (mm ) (Nl/min) 7 (147.5) 7 (147.5) 5.5 (1374.) 7 (1374.) 0 (79.65) (1) Min. operating frequency is based on JIS B8375. (Once every 30 days) () Based on JIS B (At 0.5MPa) Air/lnert gas 0.1 to 1.0MPa 5 to 60 o C Non-locking style, Locking style DIN connector Non-lube If provided, use turbine oil (ISO, VG3) 150/50 m/s Shock resistance (Vibration resistance) (1) Applicable sub-plate VS7-1 (ISO size q) Option Note) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.) Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000 Hz. Test was performed at both energized and de-energized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.) Pilot Valve/Spacifications Option/Interface regulator Model P/A P/B A/EA B/EB ARB50 VS7-6 A B P 1.5MPa 1.0MPa 0.1 to 0.83 Mpa 5 to 60 o C Max. operating rate (1) (cycle/sec.) mm 18 mm Note 1) Use "ABR" for pressure centre style and reverse pressure style. Note ) Synthesized effective area with position single style solenoid valve Response time () (sec) 0.05 or less or less or less or less 0.05 or less Weight (3) (kg) (3) Weight without sub-plate (Sub-plate: 0.37kg) (4) (1) and () are the rates in the condition of controlled clean air SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7

2 VS7-6 Double Pilot Check Spacer/Series FPG Cylinder mid-stroke, long term retention possible. The use of the double pilot check spacer equipped with a built-in double check valve enables the cylinder to stop and remain at mid-stroke for long periods regardless of air leakage between the spool and sleeve. 3 Position Double Pilot Check Valve (Wedge packing style) VS7-6-FHG-D- R 3 position double pilot check valve achieves a reduction in air leakage as a result of main valve construction which features co-axial wedge packing (Max. leakage: cm 3 /min (ANR)). Double Pilot Check Spacer Specifications Double pilot check spacer model Applicable solenoid valve/air operated valve Leakage (cm 3 /min (ANR)) With one side solenoid energized. (With one side pilot air pressured) Both sides solenoids de-energized. (With both sides pilots not air pressured) Check Valve/Operation Pressure Characteristics The check valve will operate correctly providing that cylinder side pressure is not in excess of two times the supply pressure. P P B A VV71-FPG Series VS7-6/VSA7-6 R1 R R1 R R1 R Cylinder Speed/Stop Position Range 0 Caution Verify that there is no leakage from the pipes between valve and cylinder, and from fittings. Check for leaks by using neutral detergent solution before use. Also check the cylinder packing and the piston packing. If there is leakage, cylinder may not stop at the mid-stroke position, and could move immediately after the valve is de-energized. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. Cylinder Operation Chart Cylinder ø st ø st Supply Load factor pressure Load ø50 ø80 0.MPa 5kg 51% 8%

3 VS7-6 How to Order E VS7 6 FG S 1 Q Symbol Number of solenoid Rated voltage Option Port size of sub-plate Connector S Single None Without sub-plate Connector FJG D Double N Indicator light A0 Side piping W/o connector FG YZ FHG Option Ordering source area code Code areas Japan, Asia - Australia E Europe N North America FPG FIG Caution DIN Connector (Wiring) Order Made Precautions Specifications Interface regulator model Applicable solenoid valve Regulation port Max. operating pressure Setting pressure range Ambient and fluid temperature Pressure gauge port size Weight (kg) Air supply side eff area (mm ) S (P=0.7MPa, P1=0.5MPa) Air exhaust side eff area S (P=0.5MPa) 9 0V AC 00V AC 4V DC 1V DC Others (50V or less) Contact SMC for other voltages (9) Protective class class I (Mark: ) M Direct manual override A03 Side piping 3 8 Indicator light with surge Z voltage suppressor B0 Bottom piping 1 4 Wedge packing style with MR direct manual override B03 Bottom piping 3 8 R Wedge packing style R port: 3 8 V Individual pilot EXH If specifying more than one symbol, indicate them in the alphabetical order. Interface Regulator Specifications Thread Rc (PT) F G (PF) N NPT T NPTF Be sure to read before handling. Refer to p.0-33 to 0-36 for Safety Instructions and common precautions. P P A B Note: Manifold exploded view see page for details. A B EA EB ARB50 VS7-6 A B P 1.0MPa (1) 0.1 to 0.83MPa (1) 5 to 60 o C (3) mm 18 mm Note 1) Maximum operating pressure of solenoid valve is 0.9 MPa. Note ) Be sure to set pressure within setting pressure range of the solenoid valve. Note 3) Solenoid valve: Max. 50 o C Note 4) Synthesized effective area with position single style solenoid valve. Note 5) Supply pressure to interface regulator only from P port except when it is used with reverse pressure style valve. Use the ARB or ARB3 model to combine a pressure centre valve and the A and B port pressure reduction of a spacer style regulator. Use the ARB or ARB3 model to combine a reverse pressure valve and a spacer style regulator. The P port pressure reduction cannot be used. To use a perfect valve and a spacer style regulator, use a manifold or a sub plate as the standard and stack in the following order: the perfect spacer, spacer style regulator, and the valve. When a closed centre valve is combined with the A and B port pressure reduction of a spacer style regulator, it cannot be used for intermediate stops of the cylinder because of the leakage from the relief port of the regulator SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 Power Source and Wiring qmake sure all contacts are secure. wvoltage should be held within the allowable voltage range. How to calculate flow rate Refer to p.0-36 for flow rate calculations

4 VS7-6 Construction VS7-6-FG-S- -Q VS7-6-FG-D- -Q VS7-6-FHG- -Q VS7-6-FJG- -Q VS7-6-FPG- -Q VS7-6-FHG-D- R-Q Replacement Parts No. Description Part No. Material VS7-6-FG-S VS7-6-FG-D VS7-6-FHG VS7-6-FJG VS7-6-FPG q w e r t SUS NBR NBR NBR NBR AXT AXT AXT AXT MY-11N AXT AXT AXT MY-11N VFS AXT AXT AXT MY-11N VFS AXT AXT AXT MY-11N VFS AXT AXT AXT MY-11N Return spring Gasket Gasket Gasket Mini-Y-packing Pilot valve assembly Detent assembly y u i o Packing Double pilot check spacer NBR AXT511A- AXT511A- AXT511B- AXT500-9 AXT AXT511B- AXT511B- VV71-FPG

5 VS7-6 Without Sub-plate/Dimensions VS7-6-FG-S- -Q VS7-6-FG-D- -Q SV SY SYJ SX VK VZ VF VFR VP7 ( ): In case of direct manual override style. VS7-6-FHG- -Q VS7-6-FJG- -Q VS7-6-FPG- -Q VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 ( ): In case of direct manual override style

6 VS7-6 With Sub-plate/Dimensions VS7-6-FG-S- Port size of sub-plate -Q VS7-6-FG-D- Port size of sub-plate -Q VS7-6-FHG- Port size of sub-plate -Q VS7-6-FJG- Port size of sub-plate -Q VS7-6-FPG- Port size of sub-plate -Q ( ): In case of direct manual override style

7 VS7-6 Interface Speed Control Interface Speed Control AXT503-3A Symbol Interface Regulator Interface Regulator/Dimensions P regulation/arb50-00-p SV SY SYJ SX VK VZ VF VFR VP7 Symbol P port regulation A port regulation A port regulation/arb50-00-a B port regulation/arb50-00-b VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 B port regulation

8 Series VS7-6 Sub-plate Sub-plate: Series VS7-1/VSA7-1 Specifications Applicable solenoid valve/air operated valve Sub-plate size Piping Weight All R ports: 3 8 Series ISO size q ISO size q Side piping Bottom piping kg How to Order E VS7 1 A0 A0 A03 B0 B03 Piping Side piping 1 4 Side piping 3 8 Bottom piping 1 4 Bottom piping 3 8 R port: 3 8 Thread Rc (PT) F G (PF) N NPT T NPTF Ordering source area code Code areas Japan, Asia - Australia E Europe N North America

9 Series VS7-6 Manifold Manifold: Series VV71 Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. Standard Specifications Manifold block size Applicable solenoid valve Number of stations A, B-port Piping P, R1, R-port F. R. Unit Individual SUP spacer Individual EXH spacer Gallery blank disc (Differential pressure style) Including F.R.Unit ( equivalent to stations ) The manifold Series VV71 has a wide variety of functions and piping, compatible with virtually any application. Common EXH Style Every valve is supplied and exhausted by the same SUP and EXH ports running through the connected manifolds. This is the most popular configuration. When there are 5 or more stations operating simultaneously and pilot back pressure is 0.kgf/cm or more, it is recommended that all pilot EXH ports (PE) of the manifold base (4 on U side and on D side, total 6 ports) be open. Also, use "AN1-01" for silencer for pilot EXH. Multiple Pressure SUP Style Allows supply of or more different pressure to one manifold. Put in a gallery blank disc ( AXT50-14 ) between the stations to operate at different pressures. A dual pressure supply can be supplied from both the left and right sides of the manifold. If 3 or more pressures are supplied, the individual SUP spacer should be used. Bottom Piping Style/1/4, 3/8 ( A, B-port ) When side piping appearance is not acceptable or space is limited, either some of, or all ports, can be arranged with bottom piping. Individual Pilot EXH Style If there are many valve stations operating at the same time or operation frequency is high, trouble caused by back pressure will be prevented by using individual pilot EXH style valve ("VS "). ISO size q Series ISO size q 1 to One-touch fitting: ø6, ø8, ø One-touch fitting: ø1 Air filter (Auto drain, Manual drain), Regulator, Pressure switch, Air release valve VV71-P- (0: 1 4,03: 3 8,C: ø) VV71-R- (0: 1 4,03: 3 8,C1: ø1) AXT50-14 Individual EXH Style Every valve has an independent EXH port of its own. An Individual EXH spacer (VV71-R- ) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An Individual SUP spacer (VV71-P- ) mounted on the manifold block allows each valve to be supplied individually. Main EXH Back Pressure Block Style If there are many valve stations operating at the same time and main EXH back pressure may cause trouble, mount back pressure block plate ("AXT503-37A") to prevent effects of main EXH back pressure. SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ

10 VS7-6 How to Order (Manifold) E VV R 03D Q Stations Piping/A, B port Control unit Piping/P, R1, R Port 1 1 0R 1 4 (Right) Without 0D 1 4 (Bottom) 03R 3 8 (Right) Filter with auto-drain, regulator, 0U 1 4 (Top) A 0L 1 4 (Left) air release valve 0B 1 4 (Both sides) Includes F. R. Unit 03L 3 8 (Left) Filter with auto-drain, regulator, 03D 3 8 (Bottom) AP (equivalent to 0Y 1 4 (Bottom) pressure switch, air release valve 03U 3 8 (Top) stations). 03Y 3 8 (Bottom) M Filter with manual drain, regulator, air release valve 03B 3 8 (Both sides) C6R One-touch for ø6 tube (Right) Filter with manual drain, regulator, One-touch fitting for MP C1D C8R One-touch for ø8 tube (Right) pressure switch, air release valve ø1 tube (Bottom) CR One-touch for ø tube (Right) Filter with auto-drain, regulator One-touch fitting for F C1U C6L One-touch for ø6 tube (Left) (air release valve-blank) ø1 tube (Top) C8L One-touch for ø8 tube (Left) Filter with manual drain, regulator One-touch fitting for G C1B CL One-touch for ø tube (Left) (air release valve-blank) ø1 tube (Both sides) Combination C Air release valve (filter, regulator-blank) Combination Please provide E Air release valve Please provide piping piping specifications. specifications. Ordering source area code Code areas - Japan, Asia Australia E Europe N North America Silencer box SB W/o silencer box Silencer box Mounting position of silencer box is in accordance with piping of R1 and R ports. Air release valve/rated voltage Order Made Without air release valve 0V AC 50/60Hz 00V AC 50/60Hz 4V DC 1V DC Others(50V or less) Contact SMC for other voltages (9) Protective class class I (Mark: ) Note) Manifold exploded view see page for details F. R. Unit for Manifold Air filter, regulator, pressure switch, air release valve can be directly mounted to the manifold base, simplifying piping. Classification of Control Unit Symbol Control unit Air filter with auto-drain Air filter with manual drain Regulator Air release valve Pressure switch Blank plate (Air release valve) Blank plate (Air filter, Regulator) A AP M MP F G C E Options Blank plate Air release valve adaptor plate F. R. Unit Pressure switch Manifold/Applications AXT50-9A (for manifold) AXT50-18A (for air release valve adaptor plate) MP (for control unit/filter regulation valve) MP3 (for pressure switch) AXT50-17A VAW-A (Adaptor plate, filter with auto drain cock, regulator) VAW-M (Adaptor plate, filter with manual drain cock, regulator) IS30-X30 (-M5 X 1) Interface for reverse pressure R1, R individual EXH spacer Interface speed control Lock up cylinder adaptor plate Interface Relieving regulator style Main EXH back pressure block plate Silencer for pilot EXH Residual pressure release valve spacer Individual SUP spacer with residual pressure release valve Double pilot check spacer with residual pressure release valve AXT50-1A-1 ( 3 8 ) VV71-R-03 AXT503-3A AXT50-6A P port regulation ARB A port regulation B port regulation AXT503-37A AN1-01 VV71-R-AB 0: 1 4 VV71-PR- 03: 3 8 VV71-FPGR Manifold blocks necessary for mounting 1 F. R. Unit/Specifications Air filter (w/auto-drain, w/manual drain) Filtration 5µm Regulator Set press. (secondary) 0.05 to 0.85MPa Pressure switch Pressure regulation range 0.1 to 0.7MPa Contacts 1ab Rated current (Induction load) 15V AC 3A, 50V AC A Air release valve (Single only) Operating press. range 0.1 to 1.0MPa 1.19-

11 VS7-6 Manifold/Dimensions Common EXH SV SY SYJ SX VK VZ VF VFR ( ): In case of direct manual override style. Individual EXH L: Dimensions L n 1 L1 L Manifold weight general formula=0.43n+0.49 (kg) n: Station Equation L1=43n+64 L=43n+76 VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 ( ): In case of direct manual override style

12 VS7-6 Manifold/Dimensions F. R. Unit ( ): In case of direct manual override style. Interface Speed Control L: Dimensions n: Station L n Equation L1 L L1=43n+64 L=43n+76 L L3=43n+11 Interface Regulator Bottom Piping

13 ISO Interface Solenoid Valve/SIZEw Metal Seal SeriesVS7-8 VS7-8-FPG-D VS7-8-FG-D Accessories Mounting bolt ( with washer ) Packing Indicator Iight Optional Specifications Surge voltage suppressor Reverse pressure TA-B-6 X 45 AXT5-13 ( Option ) Available VS7-8-FHG-D VS7-8-FG-S Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. R1/R port: Pressure in R1=P1 pressure R=P pressure, P1=P < position 3 position Option Single solenoid ( FG-S ) Double solenoid ( FG-D ) Reverse pressure (YZ-S) Reverse pressure (YZ-D) Closed centre ( FHG-D ) Exhaust centre ( FJG-D ) Double pilot check ( FPG-D ) Pressure centre ( FIG-D ) Standard Specifications Fluid Operating pressure Ambient and fluid temperature Manual override Electrical entry Lubrication Part No. AXT511C-1 (V) AXT511C- (V) AXT511C-3 (V) AXT511C-4 (V) Rated voltage (V) 0V AC 50/60 Hz 00V AC 50/60 Hz 4V DC 1V DC Inrush current (A) 0.049/ /0.01 Holding current (A) 0.031/ / Allowable voltage (V) 85 to 1% of rated voltage Insulation Class B (130 o C) or equivalent (V): Pilot EXH individual style. Blank plate No. of positions (Single) (Double) 3 (Closed centre) 3 (Exhaust centre) 3 (Pilot check) Interface regulator model (1) Applicable solenoid valve Regulation port Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Pressure gauge port size Weight (kg) Air supply side eff. area S (P=0.7MPa, P1=0.5MPa) () (mm ) Air exhaust side eff. area S ( P=0.5MPa) () Model VS7-8-FG-S- -Q VS7-8-FG-D- -Q VS7-8-FHG-D- -Q VS7-8-FJG-D- -Q VS7-8-FPG-D- -Q ARB350 VS7-8 A B P 1.5MPa 1.0MPa 0.1 to 0.83 MPa 5 to 60 o C P/A P/B A/EA B/EB mm 53 mm 7 7 Note 1) Use "ABR" for pressure centre style and reverse pressure style. Note ) Synthesized effective area with position single style solenoid valve. AXT51-9A Effective area (WitH 3 8 sub-plate) (mm ) (Nl/min) 58 ( ) 58 ( ) 58 ( ) 58 ( ) 40 (159.30) (1) Min. operating frequency is based on JIS B8375. (Once in 30 days) () Based on JIS B (At 0.5MPa) Air/lnert gas 0.1 to 1.0MPa 5 to 60 o C Non-locking style, Locking style DIN connector Non-lube If provided, use turbine oil ( ISO, VG3 ) 150/50 m/s Shock/Vibration resistance (1) Applicable sub-plate VS7- (ISO size w ) Option NOTE 1): Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.) Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000 Hz. Test was performed at both energized and deenergized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.) Pilot Valve/Spacifications Option Model Option/Interface Regulator Max. operating rate (1) (cycle/sec) Response time () (sec) or less 0.00 or less 0.05 or less 0.05 or less 0.06 or less Weight (3) (kg) (3) Weight without sub-plate (Sub-plate: 0.37kg) (4) (1) and () are the rates in the condition of controlled clean air SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7

14 VS7-8 Double Pilot Check Spacer/Series FPG Cyinder mid-stroke/long term retention possible. The use of the double pilot check spacer equipped with a built-in double check valve enables the cylinder to stop and remain at mid-stroke for long periods regardless of air leakage between the spool and sleeve. 3 Position Double Pilot Check Valve (Wedge packing style) VS7-8-FHG-D- R 3 position double pilot check valve achieves a reduction in air leakage as a result of main valve construction which features co-axial wedge packing (Max. leakage: cm 3 /min (ANR)). Double Pilot Check Spacer Specifications Double pilot check spacer model Applicable solenoid valve/air operated valve Leakage (cm 3 /min (ANR)) With one side solenoid energized. (With one side pilot air pressured) Both sides solenoids de-energized. (With both sides pilots not air pressured) Check Valve/Operation Pressure Characteristics The check valve will operate correctry providing that cylinder side pressure is not in excess of two times the supply pressure. P P A B VV7-FPG Series VS7-8/VSA7-8 R1 80 R R1 80 R R1 0 R Cylinder Speed/Stop Position Range Caution Verify that there is no leakage from the pipes between valve and cylinder, and from fittings. Check for leaks by using neutral detergent solution before use. Also check the cylinder packing and the piston packing. If there is leakage, cylinder may not stop at the mid-stroke position, and could move immediately after the valve is deenergized. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. Cylinder Operation Chart Cylinder ø st ø st Supply Load factor Load pressure ø50 ø80 0.MPa 5kg 51% 8%

15

16 VS7-8 Construction VS7-8-FG-S- -Q VS7-8-FG-D- -Q VS7-8-FHG- -Q VS7-8-FJG- -Q VS7-8-FPG- -Q VS7-8-FHG-D- R-Q Replacement Parts No. q w e r t y u i o Description Return spring Gasket Gasket Gasket Mini-Y-packing Pilot valve assembly Detent assembly Double pilot check spacer Packing Part No. Material VS7-8-FG-S VS7-8-FG-D VS7-8-FHG VS7-8-FJG VS7-8-FPG SUS NBR NBR NBR NBR AXT5-1 AXT5-13 AXT5-14- AXT MY-16N AXT5-13 AXT5-14- AXT MY-16N AXT5-1 AXT5-13 AXT5-14- AXT MY-14N AXT5-1 AXT5-13 AXT5-14- AXT MY-14N AXT5-1 AXT5-13 AXT5-14- AXT MY-14N NBR AXT511C- AXT511C- AXT511C- AXT5-9 AXT AXT511C- AXT511C- VV7-FPG

17 VS7-8 With Sub-plate/Dimensions VS7-8-FG-S- -Q VS7-8-FG-D- -Q SV SY SYJ SX VK VZ VF VFR VP7 VS7-8-FHG- -Q VS7-8-FJG- -Q VS7-8-FPG- -Q VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 ( ): In case of direct manual override style

18 VS7-8 Without Sub-plate/Dimensions VS7-8-FG-S- Port size of sub-plate -Q VS7-8-FG-D- Port size of sub-plate -Q VS7-8-FHG- Port size of sub-plate -Q VS7-8-FJG- Port size of sub-plate -Q VS7-8-FPG- Port size of sub-plate -Q ( ): In case of direct manual override style. Note) Symbol EA and EB correspond to R1 and R respectively (R1=EA, R=EB)

19 VS7-8 Interface Speed Control Interface Speed Control/Dimensions AXT5-3A Interface Regulator Symbol Interface Regulator/Dimensions P port regulation/arb p SV SY SYJ SX VK VZ VF VFR VP7 Symbol P port regulation A port regulation A port regulation/arb a B port regulation/arb b VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 B port regulation

20 Series VS7-8 Sub-plate Symbol Model Piping Port size VS7-- A03 A04 Side 3 8, 1 VS7-- B03 B04 Bottom VS7--A06 Side 3 4 VS7--B06 Bottom

21 Series VS7-8 Manifold Manifold: Series VV7 Note: Please note that single subplates and manifolds have changed colour from platinium silver to white as standard. Valves will remain platinium silver. Standard Specifications Manifold block size Applicable solenoid valve Number of stations A, B-port Piping P, R1, R-port Individual SUP spacer Individual EXH spacer Gallery blank disc (Differential pressure style) The manifold Series VV7 has a wide variety of functions and porting compatible with virtually any application need. Common EXH Style Every valve is supplied and exhausted by the same SUP and EXH ports running through the connected manifolds. This is the most popular configuration. When there are 5 or more stations operating simultaneously and pilot back pressure is 0.kgf/cm or more, it is recommended that all pilot EXH ports (PE) of the manifold base (4 on U side and on D side, total 6 ports) be opened. Also, use AN1-01 for silencer for pilot EXH. V Type V type allows combinations with valves of varying body size. ( Interface adapter plate VV7-V-1 ) Main EXH Back Pressure Block Style If there are many valve stations operating at the same time and main EXH back pressure may cause trouble, mount back pressure block plate ("AXT503-37A") to prevent effects of main EXH back pressure. ISO Size w Series ISO Size w 1 to 3 8, 1 1, 3 4 VV7-P- VV7-R- AXT A (for P port) AXT51-14-A (for R1, R port) Individual EXH Style Every valve has an independent EXH port of its own. An individual EXH spacer (VV7-R-03, 04) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An individual SUP spacer (VV7-P-03, 04) mounted on the manifold-block allows each valve to be supplied individually. Multiple Pressure SUP Style Allows supply of or more different pressures to one manifold. Put in a gallery blank disc (AXT A) between the stations to operate at different pressures. When using a dual pressures supply, the pressure can be supplied from both the left and right sides of the manifold. If 3 or more pressures are supplied, pressure should be supplied from the spacer (VV7-P- ) port. Bottom Piping Style (3/8, 1/) When side piping appearance is not acceptable or space is limited, bottom piping for A or B ports is possible. SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 Individual Pilot EXH Style If there are many valve stations operating at the same time or operation frequency is high, trouble caused by back pressure will be prevented by using individual pilot EXH style valve ("VS V")

22 VS7-8 VV R 04R 03L 04L 03Y 04Y 3 8 (Right) 1 (Right) 3 8 (Left) 1 (Left) 3 8 (Bottom) 1 (Bottom) Combination Note) When mixing, inscride a mark and designate a separate piping specification. E Without air release valve With air release valve 04D 04U 04B 06D 06U 06B 1 (Bottom) 1 (Top) 1 (Both sides) 3 4 (Bottom) 3 4 (Top) (Both sides) Without air release valve 0A CV 50/60Hz 00A CV 50/60Hz 4V DC 1V DC Others (50V or less) 1.19-

23 VS7-8 Manifold/Dimensions L: Dimensions Common EXH Size L L1 L L1 L n M if ld i ht l f l M (k ) Equation n: stations L1=56n+64 L=56n+80 n: stations L1=56n+90 L=56n+6 SV SY SYJ SX VK VZ VF VFR ( ): In case of direct manual override style. VP7 Individual SUP VQC Individual EXH Double pilot check SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 ( ): In case of direct manual override style

24 VS7-8 Manifold/Dimensions L: Dimensions V Type Size L L1 L L1 L n Equation n: stations L1=56n+64 L=56n+80 n: stations L1=56n+90 L=56n+6 ( ): In case of direct manual override style. Interface Speed Control Interface Regulator Bottom Piping ( ): In case of direct manual override style

25 Air Operated/SIZEqw SeriesVSA7-6/VSA7-8 VSA7-6-FG-D VSA7-6-FJG-D VSA7-8-FJG-D VSA7-8-FG-S Ordering source area code Code areas Japan, Asia - Australia E Europe N North America FG YZ FHG VSA7-6-FG-S VSA7-8-FG-D FJG FPG FIG E Passage symbol position 3 position Option Single (FG-S) Double (FG-D) Reverse pressure (YZ-S) Closed centre (FHG-D) Exhaust centre (FJG-D) Double pilot check (FPG-D) Pressure centre (FIG-D) Specifications Fluid Max. operating pressure Min. operating YZ-S, FG-S (1) pressure (3) Others Proof pressure Ambient and fluid temperature Lubrication Shock/Vibration resistance (4) Enclosure Manual override Pilot air pressure (3) Model Size q Series VSA 7-6 Air/Inert gas 1.0MPa 0.1MPa 0MPa 1.5MPa to 60 o C () Not required. 150/50m/s Dust proof Non-locking push style (Option) 0.1 to 1.0 to. MPa Note 1) Min. operating pressure should be equivalent to or lower than pilot supply pressure. Note ) Use dry air at the low temperatures. Note 3) Use controlled clean air. Note 4) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.) Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000 Hz. Test was performed at both energized and de-energized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.) No. of positions (Single) (Double) 3 (Closed) 3 (Exhaust) 3 (Pilot check) 3 (Pressure) (Reverse pressure) VSA7 6 8 How to Order Body size SIZEq SIZEw S D Model VSA7-6-FG-S VSA7-6-FG-D VSA7-6-FHG-D VSA7-6-FJG-D VSA7-6-FPG-D VSA7-6-FIG-D VSA7-6-YZ-S Pilot port position Single Double 1 Effective area (mm )(Nl/min) 7 (147.5) 7 (147.5) 5.5 (1374.) 7 (147.5) 0 (79.65) 5.5 (1374.) 7 (147.5) Pilot port position Pilot cover, PA/PB port Sub-plate, 14X/ 1Y port (PE port) Size w Series VSA 7-8 No. of positions (Single) (Double) 3 (Closed) 3 (Exhaust) 3 (Pilot check) 3 (Pressure) (Reverse pressure) 6 FG D 1 A03 Model VSA7-8-FG-S VSA7-8-FG-D VSA7-8-FHG-D VSA7-8-FJG-D VSA7-8-FPG-D VSA7-8-FIG-D VSA7-8-YZ-S Effective area (mm )(Nl/min) 58( ) 58( ) 58( ) 58( ) 40(159.30) 58( ) 58( ) Thread Rc (PT) F G (PF) N NPT T NPTF Port size Symbol A0 A03 A04 B0 B03 SizeqSeries VSA 7-6 Side piping 1 4 Side piping 3 8 Bottom piping 1 4 Bottom piping 3 8 SizewSeries VSA 7-8 Side piping 3 8 Side piping 1 Bottom piping 3 8 B04 Bottom piping 1 R port: 3 8 Option (Manual override) Without manual override M With manual override SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7

26 VSA7-6/VSA7-8 Air Operated/Dimensions SIZEq VSA7-6- FG-S- - YG SIZEw VSA7-8- FG-S- - YG SIZEq VSA7-6-FG-D- - SIZEw VSA7-8-FG-D- - ( ): In case of VSA7-8 FHG SIZEq VSA7-6- FJG - - FIG FHG SIZEw VSA7-8- FJG - - FIG SIZEq VSA7-6-FPG-FPG- - SIZEw VSA7-8-FPG-FPG- - ( ): In case of VSA

27 Air Operated: SIZEq Manifold Manifold: Series VVA71 Standard Specifications Manifold application example Manifold block size Applicable valve Stations Piping A, B port P, R1, R port Control unit Individual SUP spacer Individual EXH spacer Block plate (Differential pressure style) Including F.R. Unit (equivalent to stations). The manifold Series VVA71 has a wide variety of functions and piping, compatible with virtually any application. Common EXH Style Every valve is supplied and exhausted by the same SUP and EXH ports running through the connected manifolds. This is the most popular configuration. Multiple Pressure SUP Style Allows supply of or more different levels of pressures to one manifold. Put in a gallery blank disc (AXT50-14) between the stations to operate at different pressures. A dual pressure supply can be applied to both the left and right sides of the manifold. If 3 or more pressures are supplied, the individual SUP spacer should be used. How to Order VVA71... Stations 1 1 station... stations Including F.R. Unit ( stations) Piping (A, B port) 0R 1 4 (Right) 03R 3 8 (Right) 0L 1 4 (Left) 03L 3 8 (Left) 0Y 1 4 (Bottom) 03Y 3 8 (Bottom) C6R One-touch fitting ø6 (Right) C8R One-touch fitting ø8 (Right) CR One-touch fitting ø (Right) C6L One-touch fitting ø6 (Left) C8L One-touch fitting ø8 (Left) CL One-touch fitting ø (Left) Mix Indicate piping specifications. 5 03R 03D 1 A AP M MP F G C E ISO size 1 Series ISO size 1 1 to 1 4, 3 8 One-touch fitting: ø6, ø8, ø 3 8One-touch fitting: ø1 Air filter (Auto drain, Manual drain), Regulator, Pressure switch, Air release valve VV71-P- (0: 1 4,03: 3 8,C: ø) VV71-R- (0: 1 4, 03: 3 8, C: ø) AXT50-14 Bottom Piping Style/1/4, 3/8 (A, B port) When side piping appearance is not acceptable or space is limited, either some of, or all ports, can be arranged with bottom piping. Individual EXH Style An individual EXH spacer (VVA71-R- ) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An individual SUP spacer (VVA71-P- ) mounted on the manifold block allows each valve to be supplied individually. 1 Pilot supply port Valve body side Manifold block side Piping (P, R1, R port) 03D 3 8 (Bottom) 03U 3 8 (Top) 03B 3 8 (Both sides) C1D One-touch fitting ø1 (Bottom) C1U One-touch fitting ø1 (Top) C1B One-touch fitting ø1 (Both sides) Mix Indicate piping specifications. Control Unit None Filter with auto drain, regulator, air release valve Filter with auto drain, regulator, air release valve, pressure switch Filter with manual drain, regulator, air release valve Filter with manual drain, regulator, air release valve, pressure switch Filter with auto drain, regulator (air release valve blank plate) Filter with manual drain, regulator (air release valve blank plate) Air release valve (filter, air release valve blank plate) Air release valve Indicate pilot supply port. 1 VSA7-6-FG-S-1 VSA7-6-FG-S SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7

28 VSA7-6/VSA7-8 Manifold/Dimensions L: Dimensions L L1 L n n: Station Equation L1=43n+64 L=43n+76 Common EXH Individual SUP

29 VSA7-6/VSA7-8 Manifold/Dimensions Control unit Interface Speed Control Bottom Piping L: Dimensions n: Station L L1 L n Equation L1=43n+64 L=43n+76 L L3=43n+11 Interface Regulator SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ

30 Air Operated: SIZEw Manifold Manifold: Series VVA7 Standard Specifications Manifold block size Applicable valve Stations Piping Individual SUP spacer Individual EXH spacer A, B port P, R1, R port Block plate (Differential pressure style) Including F. R. Unit (equivalent to stations). The manifold Series VVA7 has a wide variety of functions and piping, compatible with virtually any application. Common EXH Style Every valve is supplied and exhausted by the same SUP and EXH ports running through the connected manifolds. This is the most popular configuration. ISO size Series ISO size 1 to VV7-P- VV7-R- AXT A (for P port) AXT51-14-A (for R1, R port) Individual EXH Style An individual EXH spacer (VVA7-R-03/04) mounted on the manifold block allows each valve to exhaust individually. Individual SUP Style An individual SUP spacer (VVA7-P-03/04) mounted on the manifold block allows each valve to be supplied individually V Type V type allows combinations with valves of varying body size. (Interface adapter plate VVA7-V-1) How to Order VVA7 Stations 1 1 station stations Piping (A, B port) 03R 3 8 (Right) 04R 1 (Right) 03L 3 8 (Left) 04L 1 (Left) 03Y 3 8 (Bottom) 04Y 1 (Bottom) Mix Indicate piping specifications. 5 03R 04D 1 Air release valve E Multiple Pressure SUP Style Allows supply of or more different pressures to one manifold. Put in a gallery blank disc (AXT A) between the stations to operate at different pressures. A dual pressure supply can be applied to both the left and right sides of the manifold. If 3 or more pressures are supplied, the individual SUP spacer (VV71-P- ) should be used. Bottom Piping Style/(3/8, /1) When side piping appearance is not acceptable or space is limited, A or B port can be arranged with bottom piping. 1 Pilot supply port Valve body side Manifold block side 1 4 Piping (P, R1, R port) 04D 04U 04B 1 (Bottom) 1 (Top) (Both sides) 06D 3 (Bottom) 06U 06B 3 4 (Top) 3 4(Both sides) Without air release valve With air release valve Indicates pilot supply port. 1 VSA7-6-FG-S-1 VSA7-6-FG-S-

31 VSA7-6/VSA7-8 Manifold/Dimensions Common EXH L: Dimensions Size L L1 L L1 L n n: Station Equation L1=56n+64 L=56n+80 L1=56n+90 L=56n+6 SV SY SYJ SX VK VZ VF VFR VP7 ( ): 3/4 Individual SUP VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ7 ( ): 3/

32 VSA7-6/VSA7-8 Manifold/Dimensions V Type ( ): 3/4 Interface Speed Control L: Dimensions Size L L1 L L1 L Interface Regulator n n: Station Equation L1=56n+64 L=56n+80 L1=56n+90 L=56n+6 Bottom Piping ( ): 3/

33 Manifold Exploded View VS7-6 D side end plate assembly Tension bolt Manifold block assembly U side end plate assembly < End plate assembly > AXT50 A <Tension bolt part number > AXT50 34 End plate position L R L side R side P, R port size 0 03 C1 1/4 3/8 ø1 One-touch fitting Number of stations 3 For stations For 3 stations For stations < Manifold block assembly> AXT50 1A < Manifold block replacement parts > Part No. Description Qty. Material Wiring specification Cylinder port position AXT50-19 O-ring 4 NBR A B Side Bottom L R L side R side AXT50-0 AXT50-- O-ring Plate 1 NBR SPCC Cylinder port size 0 03 C6 Note 1) C8 Note 1) C Note 1) 1/4 3/8 ø6 One-touch fitting ø8 One-touch fitting ø One-touch fitting AXT50-31 M4 X 8 Gasket Oval countersunk head screw 1 NBR SWRH3

34 Manifold Exploded View VS7-8 D side end plate assembly Manifold block assembly U side end plate assembly < End plate assembly > <Manifold block assembly> AXT51 A AXT51 1A End plate position L R L side R side P, R port size C1 1/ 3/4 ø1 One-touch fitting Wiring specification A B Side Bottom Cylinder port position L R Cylinder port size L side R side /8 1/ < Manifold block replacement parts> Part No. Description Qty. Material AXT51-13 O-ring NBR AS568-0 O-ring 1 NBR AS O-ring NBR AXT51-5 Gasket 1 NBR AXT51-4 Plate 1 SPCC M4X Oval countersunk head screw SWRH3 AXT Connection fitting A AXT Connection fitting B AXT Hexagon socket head screw

35 ISO CNOMO Standard Solenoid Valve Metal Seal - SIZESqwe Series VS7 6 8 VS7 6 Size q VS7 8 Size w VS7 Size e Solenoid interface conforms to CNOMO. Manifold interface to ISO standards. Low power consuption: 1.8W per solenoid. Internal or external pilot supply. Available in ISO 1, and 3 sizes. Large flow capacity. Fast response and long life. position 3 position Single solenoid (FG-S) Double solenoids (FG-D) Closed centre (FHG-D) Exhaust centre (FJG-D) Standard Specifications Fluid Single position position Pressure centre (FIG-D) Air and inert gas 0.15 to to 0.9 Operating pressure (MPa) Double 3 position 0.15 to 0.9 Ambient and fluid temperature Max. 50 C Manual operation Non-locking Electrical entry DIN43650 connector Lubrication Unnecessary (Turbine oil class 1 - ISO VG3 if used) Enviromental protection rating IP65 Shock/Vibration resistance 300/50m/s Note 1) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle direction of the main valve and armature, for both energized and de-energized states. Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 000Hz. Test was performed at both energized and de-energized states to the axis and right angle direction of the main valve and armature. (value in the initial stage.) Pilot Valve Specifications Rated voltage (V) 0V AC 50/60Hz, 00V AC 50/60Hz, 4V DC, 1V DC DC (W) 1.8 Power AC Inrush current (VA) 5.4 comsuption AC Holding current (VA) 3.6 Allowable voltage (V) -15% to +% of rated voltage Coil insulation Class B (130 C) or equivalent Model No. of positions Size q Model (Single) VS7-6-FG-S- -Q (Double) VS7-6-FG-D- -Q 3 (Closed centre) VS7-6-FHG-D- -Q 3 (Exhaust centre) VS7-6-FJG-D- -Q 3 (Pressure centre) VP7-6-FIG-D- -Q Size w (Single) VS7-8-FG-S- -Q (Double) VS7-8-FG-D- -Q 3 (Closed centre) VS7-8-FHG-D- -Q 3 (Exhaust centre) VS7-8-FJG-D- -Q 3 (Pressure centre) VS7-8-FIG-D- -Q Size e (Single) VS7--FG-S- -Q (Double) VS7--FG-D- -Q 3 (Closed centre) VS7--FHG-D- -Q 3 (Exhaust centre) VS7--FJG-D- -Q 3 (Pressure centre) VS7--FIG-D- -Q Flow (Nl/min) Max. operating frequency (Hz) Response time (Ms) Weight (g) SV SY SYJ SX VK VZ VF VFR VP7 VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ

36 VS7 6 8 How to Order Valve EVS7 6 FG S 3 CV Q SIze 6 ISO 1 8 ISO ISO 3 Configuration Solenoid Voltage S Single FJG D Double 5 FG FHG FIG V AC, 50/60Hz 0V AC, 50/60Hz 4V DC 1V DC Others (50V or less) Order Made Contact SMC for other voltages (9) How to Order Sub-plate - Size q Specifications Applicable solenoid valve Sub-plate size Piping Weight ) All R ports: 3 8 ISO size 1 ISO size 1 Side piping, Bottom piping, kg How to Order Sub-plate E VS7 1 A0 Thread - Rc(PT) F G(PF) N NPT T NPTF Ordering source area code Code areas Japan, Asia - Australia E Europe N North America Piping and port size A0 Side 1 4 A03 Side 3 8 B0 Bottom 1 4 B03 Bottom 3 8 R port: 3 8 Dimensions Model EVS7-1-A0 EVS7-1-A03 EVS7-1-B0 EVS7-1-B03 Piping Side Side Bottom Bottom Port size P, A, B R1, R

37 ISO/CNOMO type VS7 6 8 Dimemsions with Sub-plate - Size q EVS7 6 FG S CV Q EVS7 6 FG D CV Q SV SY SYJ SX VK VZ VF VFR VP7 EVS7 6 FHG D CV Q EVS7 6 FJG D CV Q EVS7 6 FIG D CV Q VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ

38 VS7 6 8 How to Order Sub-plate - Size w Applicable solenoid valve Sub-plate size Piping Weight ISO size ISO size Side piping: 3 8 1, 3 4 Bottom piping: 3 8 1, ( 3 8, 1 ) 1.9 ( 3 4 ) How to Order Sub-plate E VS7 A03 Thread - Rc(PT) F G(PF) N NPT T NPTF Ordering source area code Code areas Japan, Asia - Australia E Europe N North America A03 A04 A06 B03 Piping and Port size Side 3 8 Side 1 Side 3 4 Bottom 3 8 B04 Bottom 1 B06 Bottom 3 4 Dimensions Piping Port size A B C D E F G H J K L M N O P Q R S T U V W X Y EVS7--A03 Side A04 3 8, EVS7--B03 Bottom B04 EVS7--A06 Side EVS7--B06 Bottom 4-M6, 1 Deep 4-M6, 1 Deep

39 ISO/CNOMO type VS7 6 8 Dimemsions with Sub-plate - Size w EVS7 8 FG S CV Q EVS7 8 FG D CV Q SV SY SYJ SX VK VZ VF VFR VP7 EVS7 8 FHG D CV Q EVS7 8 FJG D CV Q EVS7 8 FIG D CV Q VQC SQ VQ VQ4 VQ5 VQZ VQD VFS VS VS7 VQ

40 VS7 6 8 How to Order Manifold Specifications ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series. How to Order Manifold ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series. Options ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series. Dimensions ) These are available for ISO1 and ISO size manifolds and are common to those and on the VS7-6/8 and VQ7-6/8 series valves. For more details on Specificatios, options, how to order and dimensions please refer to these series