Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L

Size: px
Start display at page:

Download "Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L"

Transcription

1 Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at Type of actuation Type of actuation Rated voltage Body option 100 VAC, 0/0 Hz 200 VAC, 0/0 Hz 110 VAC, 0/0 Hz 220 VAC, 0/0 Hz 24 VDC 12 VDC Other Option How to Order Rated voltage Electrical entry Light/Surge voltage suppressor Body ported L M position single 2 position double position closed center position exhaust center position pressure center Body option 0: Individual exhaust for the pilot valve (R) port PE port : Common exhaust type for main and pilot valve (R) port PE port 4(A)/2(B) port size Nil: Non-locking push type Option Option F: With foot bracket U: With silencer K: With foot bracket and silencer (2 position single only) B: Locking type B (Slotted) (2 position single type only) Note) The bracket and silencer are not assembled. 4(A), 2(B) port size M M x 0.8 C4 One-touch fitting for ø4 C One-touch fitting for ø Note) 1(P), (R1), (R2) port: M x 0.8 C: Locking type C (Manual) Electrical entry Grommet L plug connector M plug connector DIN terminal G: Lead wire length 00 mm L: With lead wire (Length 00 mm) M: With lead wire (Length 00 mm) MN: Without lead wire D: With connector Light/Surge voltage suppressor Nil Z S None With light/surge voltage suppressor With surge voltage suppressor Not available for GZ, HZ and DOZ H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector DO: Without connector Type LN, MN : With 2 sockets. --17

2 Series 000 Applicable for cylinder actuation (up to ø40). Compact size (Width: 1 mm) Low power consumption: 1.8 W DC Refer to pages --24 to --27 for manifold use. Made to Order Specifications (For details, refer to page --8.) Specifications Fluid 2 position single Operating pressure 2 position double range (MPa) position Ambient and fluid temperature ( C) Response time (ms) (1) 2 position single, double (at the pressure of 0. MPa) Max. operating frequency (Hz) Effective area (2) Pilot exhaust method Lubrication Mounting orientation Impact/Vibration resistance (m/s 2 ) () Enclosure Note 1) Based on dynamic performance test, JIS B (Coil temperature: 20 C, at rated voltage, without surge suppressor) Note 2) When operating the locking type manually, apply torque of 0.2 N m or less. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 4 and 2000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Solenoid Specifications Electrical entry AC 0/0 Hz Coil rated voltage (V) DC Allowable voltage fluctuation (%) Power consumption (W) Note) [Current ma] DC Note) Apparent power (VA) [Current ma] Surge voltage suppressor Indicator light Note) At rated voltage Option Description With foot bracket Silencer position 2 position single, double position AC Part no. DXT B AN120-M Inrush Holding Air 0.1 to to to to 0 C (No freezing. Refer to page -1-4.) 20 or less or less 10 Refer to the table below. Non-locking push type, Locking slotted type, Locking lever type Individual pilot exhaust type, Common exhaust (pilot and main valve) type Not required Unrestricted 00/0 Dustproof Grommet (G)/(H), L plug connector (L), M plug connector (M), DIN terminal (D) 100, 200, 24, 48, 110, ,, 12, 48 1 to +10% of rated voltage 1.8 (With indicator light 2.1) [24 VDC: 7 (With indicator light 87.)] Option 100 VAC: 4/0 Hz, 42/0 Hz 4./0 Hz, 4.2/0 Hz 200 VAC: 22./0 Hz, 21/0 Hz 100 VAC: /0 Hz, 0/0 Hz./0 Hz, /0 Hz 200 VAC: 17./0 Hz, 1/0 Hz DC: Diode, AC: ZNR DC: LED (Red), AC: Neon bulb Note For 12 0 Noise reduction: 21dB or more (ø8 x 17 mm) --18

3 Port Solenoid Valve Body Ported Series 000 Flow Characteristics/Weight Valve model 20- -M 20- -C C 2 position position 2 position position 2 position position Type of actuation Single Double Closed center Exhaust center Pressure center Single Double Closed center Exhaust center Pressure center Single Double Closed center Exhaust center Pressure center Port size 1,, (P, EA, EB) M x 0.8 M x 0.8 M x 0.8 4, 2 (A, B) M x 0.8 C4 (One-touch fitting for ø4) C (One-touch fitting for ø) It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 100% Flow characteristics Note) 1 4/2 (P A/B) 4/2 / (A/B EA/EB) C [dm /(s bar)] 0.47 b 0.41 Cv 0.1 C [dm /(s bar)] 0.47 b 0.41 Cv [0.9] [0.41] [0.44] Note) [ ]: Denotes the normal position. Exhaust center: 4/2 /, Pressure center: 1 4/2 Cylinder Speed Chart Series 120-M Average speed (mm/s) [0.8] [0.10] [0.7] 0.1 [0.10] [0.9] [0.12] Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CJ2 Pressure 0. MPa Load factor 0% Stroke 0 mm Series CM2 Pressure 0. MPa Load factor 0% Stroke 00 mm ø ø10 ø1 ø20 ø2 ø2 ø40 Perpendicular, upward actuation Horizontal actuation [0.9] [0.41] [0.41] [0.] [0.7] 0.10 [0.11] [0.8] [0.10] [0.11] 0.11 Weight (g) Grommet Conditions SZ120-M Body ported Tube bore x Length Speed controller Silencer Series CJ2 ø4 x 1 m AS101F-04 AN120-M Series CM2 ø x 1 m AS01F-0 AN Series MB ø8 x 1 m AS01F

4 Series 000 Construction 2 position single 2 position double position closed center position closed center/exhaust center/pressure center position exhaust center position pressure center (This figure shows a closed center type.) Component Parts No. Description q Body w Piston plate e Piston r Spool valve t End cover y Spool spring Material Aluminum die-casted Resin Resin Aluminum, HNBR Resin Stainless steel Note Platinum silver Black Replacement Parts No. u i Description Material Part no. Note Solenoid assembly Epoxy/Stainless steel DXT170-C- Common with O-ring NBR 1 x 11 x 1 1 Series

5 Port Solenoid Valve Body Ported Series Position Single Grommet (G), (H) M G H Mounting hole for manifold 120 Bracket (Non-locking) G: 00 mm H: 00 mm (Mounting screw) (Mounting hole) (PE port) (Mounting hole) (Piping port) L plug connector (L) 120- L -M M plug connector (M) 120- M -M DIN terminal (D) 120- D -M MAX. 10 Applicable cable O.D. ø. to ø7 Built-in One-touch fittings C4 C C4: MAX. 7 C: MAX. 7. : With light/surge voltage suppressor 2-One-touch fitting (A, B port) Applicable tubing model C4: T042 C: T

6 Series Position Double 220 Grommet (G), (H) M G H (Non-locking) Mounting hole for manifold G: 00 mm H: 00 mm (Mounting hole) (PE port) (Piping port) L plug connector (L) 220- L -M M plug connector (M) 220- M -M : With light/surge voltage suppressor DIN terminal (D) 220- D -M Built-in One-touch fittings C C MAX. 10 Applicable cable O.D. ø. to ø7 C4: MAX. 7 C: MAX One-touch fitting (A, B port) Applicable tubing model C4: T042 C: T

7 Port Solenoid Valve Body Ported Series 000 Position Closed Center/Exhaust Center/Pressure Center Grommet (G), (H) 4 G 20- -M H (Non-locking) (Mounting hole for manifold) (Mounting hole) G: 00 mm H: 00 mm 2-M x 0.8 (PE port) 20 (Piping port) L plug connector (L) 420- L -M M plug connector (M) 420- M -M : With light/surge voltage suppressor DIN terminal (D) 420- D -M Built-in One-touch fittings C4 C MAX. 10 Applicable cable O.D. ø. to ø7 C4: MAX. 7 C: MAX One-touch fitting (A, B port) Applicable tubing model C4: T042 C: T

8 Series 000/Body Ported Manifold Specifications Manifold Standard Manifold Specifications Model Manifold type P(SUP)/R(EXH) Valve stations 4(A), 2(B) port location 1(P), /(R) port Port size 4(A), 2(B) port Flow Characteristics Body ported For internal pilot Manifold Port size 1(P), /(R) port 2 (B), 4(A) port Type 20 Single base/b mount Common SUP/Common EXH 2 to 20 stations Valve Rc 1 8 M x 0.8, C4, C 1/8 M x Type V /8 C /8 C Note) Value at manifold base mounted, 2 position single operating Flow characteristics 1 4/2 (P A/B) 4/2 / (A/B R) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv Flat Ribbon Cable Manifold One-touch wiring to consolidate connection of external wires. Clean appearance The flat cable provides wiring on a printed circuit board to the individual valves at the manifold base, enabling the consolidation of external wiring at a touch through a 2 pins MIL connector. How to Order Manifold Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) V pc. (Manifold base) 120-G-M... 2 pcs. (Valve) DXT A... 1 pc. (Blanking plate assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. Flat Ribbon Cable Manifold Specifications Model Manifold type P(SUP), R(EXH) Valve stations 4(A), 2(B) port location 1(P), /(R) port Port size 4(A), 2(B) port Applicable flat ribbon cable connector Internal wiring Applicable valve model Type 20P Single base/b mount Common SUP/Common EXH to 12 stations Valve Rc 1 8 M x 0.8, C4, C Socket: 2 pins MIL, with strain relief (Conforming to MIL-C-80) + COM (For COM specifications, specify them separately.) 2- MOZ - Rated voltage 100 VAC 0/0 Hz, 110 VAC 0/0 Hz, 24 VDC, 12 VDC Note ) Withstand voltage specifications of wiring unit part is equivalent to JIS C 0704 class 1. 1 M C4 C --24 Flow Characteristics Body ported For internal pilot Manifold How to Order Manifold 1(P), /(R) port 1/8 1/8 Port size 2(B), 4(A) port M x 0.8 C4 C Type V-20P 2 1/ Note) Value at manifold base mounted, 2 position single operating Flow characteristics 1 4/2 (P A/B) 4/2 / (A/B R) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv Instruct by specifying the valves, blanking plate assembly and connector assembly to be mounted on the manifold along with the manifold base model no. (Example) V-20P pc. (Manifold base) 12-MOZ-C4... pcs. (Valve) 22-MOZ-C4... pcs. (Valve) DXT192-1-A... 1 pc. (Blanking plate assembly) DXT A... pcs. (Connector assembly) DXT A... pcs. (Connector assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.

9 Port Solenoid Valve Body Ported Series 000 Common SUP/Common EXH Type 20 How to Order 4(A), 2(B) port Flat Ribbon Cable Type 20P How to Order 4(A), 2(B) port Option Applicable base V-20 V-20P V-21 V Stations 02 2 stations stations V 20P 0 Combinations of Solenoid Valve, Gasket and Manifold Base Round head combination screw (With spring washer) Individual EXH Spacer Assembly DXT A Round head combination screw M2. x (With spring washer) 1(P) port Rc 1/8 / (R) port Rc 1/8 1(P) port Rc 1/8 / (R) port Rc 1/8 0 Stations stations stations Gasket P, R port thread type Nil 00F 00N 00T Rc G NPT NPTF P, R port thread type Nil Rc 00F G 00N NPT 00T NPTF Applicable solenoid valve G L M 2 - M - C4 D C Applicable blanking plate assembly DXT A Individual EXH spacer assembly DXT A Individual SUP spacer assembly DXT A Blanking Plate Assembly DXT A Applicable base V-20 V-21 DXT192-1-A Applicable solenoid valve 1 M 2- MOZ - C4 C Applicable blanking plate assembly DXT192-1-A Applicable connector assembly DXT A (For 2 position single) DXT A (For 2 position double, position) Refer to the page -10- regarding how to order applicable connector assemblies. (1: 100 VAC, : 110 VAC, 4: DC). Round head combination screw M2. x 7 (With spring washer) Blanking plate Gasket Round head combination screw M2. x 7 (With spring washer) Blanking plate Gasket Option Installation of the 00 Valve on the 000 Manifold Use of an adaptor plate makes it possible to mount Series 00 on the manifold base of Series 000. The mounting direction is shown in the diagram below. Mount the solenoid so that it will be on the same side as the single solenoid of the Series 000. Adapter plate assembly DXT200--2A Manifold gasket Applicable base V-20 V-21 Individual SUP Spacer Assembly DXT A Round head combination screw M2. x 40. (With spring washer) Series 00 Body ported Adapter plate assembly Round head combination screw Adapter plate Adapter gasket Dust cap Gasket ((R1), (R2) port) Individual EXH spacer Applicable base V-20 V-21 Gasket Gasket Caution Applicable base V-20P Note) Please contact SMC when using an individual SUP spacer assembly, an individual EXH spacer assembly, or an adapter plate assembly on type 20P. Mounting Screw Tightening Torques M2.: 0.4 N m Rc 1/8 1(P) port Individual SUP spacer Gasket Applicable base V-20 V

10 Series 000 Grommet (G), (H) Type 20 Manifold V-20- Station 1 (4(A), 2(B) port) (Mounting hole) (Non-locking) G: 00 mm H: 00 mm -Rc 1/8 (1(P), /(R) port) (PE port) Stations 2 L L (mm) L plug connector (L) M plug connector (M) DIN terminal (D) Built-in One-touch fittings C4: MAX. 7 C: MAX. 7. Applicable cable O.D. ø. to ø7 2n-One-touch fitting (A, B port) Applicable tubing model C4: T042 C: T004 : With light/surge voltage suppressor --2

11 Port Solenoid Valve Body Ported Series 000 Type 20P Flat Ribbon Cable Manifold V-20P- Station (Non-locking) 4(A), 2(B) port (Mounting hole) -Rc 1/8 1(P), /(R) port (Light/Surge voltage suppressor) Triangle mark (Station n)(station 1) Connector polarity indicator Applicable connector: 2 pins MIL (Conforming to MIL-C-80) (mm) Stations 4 L L Built-in One-touch fittings C4: MAX. 7 C: MAX. 7. 2n-One-touch fitting (A, B port) Applicable tubing model C4: T042 C: T

12 Port Solenoid Valve Base Mounted Series 000 For details about certified products conforming to international standards, visit us at Non plug-in L 1 2 Type of actuation 2 position single Type of actuation Body option Body option How to Order Rated voltage Electrical entry Plug-in 1 4 F Z 2 position double position closed center 0: Individual exhaust for the pilot valve (R) port PE port : Common exhaust type for main and pilot valve Note) Light/Surge voltage suppressor Port size Thread type Nil F N T Port size Thread type Rc G NPT NPTF Nil: Without sub-plate Note) Please contact SMC in the case of without indicator light. 01: Rc 1 8 With sub-plate (R) port PE port /Plug-in type Nil: Non-locking push type B: Locking type B (Slotted) C: Locking type C (Manual) 4 position exhaust center position pressure center Option Rated voltage 100 VAC, 0/0 Hz 200 VAC, 0/0 Hz 110 VAC, 0/0 Hz 220 VAC, 0/0 Hz 24 VDC 12 VDC Other /Non plug-in type Nil: Non-locking push type 1 0 B: Locking type B (Slotted) 1 0 C: Locking type C (Manual) Electrical entry Grommet L plug connector M plug connector DIN terminal G: Lead wire length 00 mm L: With lead wire (Length 00 mm) M: With lead wire MN: Without lead wire (Length 00 mm) D: With connector Light/Surge voltage suppressor H: Lead wire length 00 mm LN: Without lead wire LO: Without MO: Without DO: Without connector connector connector Nil Z S None With light/surge voltage suppressor With surge voltage suppressor Not available for GZ, HZ and DOZ Type LN, MN : With 2 sockets. --29

13 Series 000 Applicable for cylinder actuation (up to ø40). Compact size (Width: 1 mm) Low power consumption: 1.8 W DC Specifications Fluid Operating pressure range (MPa) Ambient and fluid temperature ( C) Response time (ms) (1) 2 position single, double (at the pressure of 0. MPa) Max. operating frequency (Hz) 2 position single 2 position double position position 2 position single, double position (2) Pilot exhaust method Lubrication Mounting orientation Impact/Vibration resistance (m/s 2 ) () Enclosure Air 0.1 to to to to 0 C (No freezing. Refer to page -1-4.) 20 or less or less 10 Non-locking push type, Locking slotted type, Locking lever type Individual pilot exhaust type, Common exhaust (pilot and main valve) type Not required Unrestricted 00/0 Dustproof Note 1) Based on dynamic performance test, JIS B (Coil temperature: 20 C, at rated voltage, without surge suppressor) Note 2) When operating the locking type manually, apply torque of 0.2 N m or less. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 4 and 2000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Refer to pages --7 to --2 for manifold use. Solenoid Specifications Electrical entry AC 0/0 Hz Coil rated voltage (V) DC Allowable voltage fluctuation (%) Power consumption (W) (1) [Current ma] DC Apparent power (VA) (1) [Current ma] Note) AC Surge voltage suppressor Indicator light Note 1) At rated voltage Note 2) Plug-in should be ZNR. Inrush Holding Grommet (G)/(H), L plug connector (L), M plug connector (M), DIN terminal (D) 100, 200, 24, 48, 110, ,, 12, 48 1 to +10% of rated voltage 1.8 (With indicator light 2.1) [24 VDC: 7 (With indicator light 87.)] Option 100 VAC: 4/0 Hz, 42/0 Hz 4./0 Hz, 4.2/0 Hz 200 VAC: 22./0 Hz, 1/0 Hz 100 VAC: /0 Hz, 0/0 Hz./0 Hz, /0 Hz 200 VAC: 17./0 Hz, 1/0 Hz DC: Diode, AC: ZNR (2) DC: LED (Red), AC: Neon bulb Combinations of Solenoid Valve and Gasket Made to Order Specifications (For details, refer to page --8.) Round head combination screw M2. x 2 (With spring washer) Gasket DXT (Use caution to the orientation.) --0

14 Port Solenoid Valve Base Mounted Series 000 Flow Characteristics/Weight Valve model Note 1) [ ]: Denotes the normal position. Exhaust center: 4/2 /, Pressure center: 1 4/2 Note 2) ( ): Without sub-plate. Cylinder Speed Chart Series (Piping: ø4 x 1 m) Speed controller/silencer (Piping: ø x 1 m) Speed controller/silencer Series 2 position position (Piping: ø x 1 m) Speed controller/silencer Type of actuation Single Double Closed center Exhaust center Pressure center Average speed (mm/s) Average speed (mm/s) Port size 1,, (P, EA, EB) Rc 1/8 4, 2 (A, B) Rc 1/8 Flow characteristics (1) 1 4/2 (P A /B) 4/2 / (A/B EA/EB) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv [0.0] 0.24 [0.44] 0.2 [0.18] 0.99 [0.47] 0.29 [0.8] 0.24 [0.12] Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CM2 Pressure 0. MPa Load factor 0% Stroke 00 mm ø20 ø2 ø2 ø40 AS201F /AN AS01F /AN Perpendicular, upward actuation Horizontal actuation Perpendicular, upward actuation Horizontal actuation Bore size Series CA1 Pressure 0. MPa Load factor 0% Stroke 400 mm ø40 ø0 ø ø80 AS01F /AN ø100 Perpendicular, upward actuation Horizontal actuation Weight (g) Grommet 12 (7) 170 (120) 180 (10) (Piping:ø8 x 1 m) Perpendicular, upward actuation Horizontal actuation Speed controller/silencer AS01F /AN It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 100% --1

15 Series 000 Built-in Speed Controllers An exhaust throttle valve is built into the solenoid valve itself, enabling a simple speed adjustment of the cylinder. If it is mounted on a manifold base, the exhaust air will converge in the common EXH port at the manifold base, thus simplifying the handling of the exhaust air. Throttle Valve Characteristics ( A B R) Effective area (mm 2 ) JIS Symbol (Single) How to Order Valve with Built-in Speed Controller Non plug-in (Fully closed) Numbers of needle rotations (turns) (Fully open) Note) To use the, open the throttle valve one turn or more from the fully closed position. To adjust the throttle valve apply torque of 0. N m or less. Be careful not to open the throttle valve excessively as this could cause the throttle valve to fly out. Type of actuation Body option Rated voltage Electrical entry Thread type Port size Light/Surge voltage suppressor --2

16 Port Solenoid Valve Base Mounted Series 000 Construction 2 position single 2 position double position closed center position closed center/exhaust center/pressure center position exhaust center position pressure center (This figure shows a closed center type.) Component Parts No. Description q Body w Piston plate e Piston r Spool valve t End cover y Spool spring Material Aluminum die-casted Resin Resin Aluminum, HNBR Resin Stainless steel Note Platinum silver Black Replacement Parts No. u i o Description Material Part no. Note Sub-plate Aluminum die-casted DXT P Platinum silver Solenoid assembly Epoxy/Stainless steel DXT170-C- O-ring NBR 1 x 11 x 1 Common with 1 Series 000 Thread type Nil: Rc F: G N: NPT T: NPTF --

17 Series Position Single Grommet (G), (H) 140- G -01 H 140 G: 00 mm H: 00 mm (Non-locking) (Mounting hole) (Mounting hole pitch) (Mounting hole pitch) (Piping port) (PE port) L plug connector (L) 140- L -01 M plug connector (M) 140- M -01 : With light/surge voltage suppressor DIN terminal (D) 140- D -01 Applicable cable O.D. ø. to ø7 Built-in speed controllers

18 Port Solenoid Valve Base Mounted Series Position Double 240 Grommet (G), (H) G H (Non-locking) (Mounting hole) (Mounting hole pitch) G: 00 mm H: 00 mm (Mounting hole pitch) (PE port) (Piping port) L plug connector (L) 240- L -01 M plug connector (M) 240- M -01 : With light/surge voltage suppressor DIN terminal (D) 240- D -01 Built-in speed controllers 20- Applicable cable O.D. ø. to ø7 --

19 Series 000 Position Closed Center/Exhaust Center/Pressure Center Grommet (G), (H) G 420- H (Non-locking) (Mounting hole) (Mounting hole pitch) 40 G: 00 mm H: 00 mm (Mounting hole pitch) 2-M x 0.8 (PE port) 4-Rc 1/8 (Piping port) L plug connector (L) 440- L -01 M plug connector (M) 440- M -01 : With light/surge voltage suppressor DIN terminal (D) 440- D -01 Built-in speed controllers 4 0- Applicable cable O.D. ø. to ø7 MAX. 10 MAX

20 Manifold Standard Series 000/Base Mounted Manifold Specifications One-touch wiring to consolidate connection of external wires. Clean appearance The flat cable provides wiring on a printed circuit board to the individual valves at the manifold base, enabling the consolidation of external wiring at a touch through a 2 pins MIL connector. Manifold Specifications Model Manifold type P(SUP)/R(EXH) Valve stations 4(A), 2(B) port Position Porting specifications Direction 1(P), /(R) port Port size Flat Ribbon Cable Manifold 4(A), 2(B) port Flow Characteristics How to Order Manifold Position Direction 1(P), /(R) port 4(A), 2(B) port Type 40 Type 41 Type 42 Type 4 Single base/b mount Common SUP/Common EXH 2 to 20 stations Base Base Bottom Side Rc 1/8 Rc 1/4 Rc 1/8 M x 0.8 Flat Ribbon Cable Manifold Specifications Manifold type P(SUP), R(EXH) Valve stations 4(A), 2(B) port location Port size Internal wiring Model Applicable flat ribbon cable connector Applicable valve model 4- MOZ - - MOZ Rated voltage 100 VAC 0/0 Hz, 110 VAC 0/0 Hz, 24 VDC, 12 VDC Note) Withstand voltage specifications of wiring unit part is equivalent to JIS C 0704 class 1. 1 C B7 Rc 1/8 One-touch fitting for ø One-touch fitting for 1/4" 1 C4 B One-touch fitting for ø4 One-touch fitting for /2" Port size Flow characteristics Manifold 1(P), /(R) 2(B), 4(A) 1 4/2 (P A/B) 4/2 / (A/B R) port port C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv V-40 1/8 M x V-41 1/8 M x V /4 1/ V-42-C 1/4 C V-4 1/8 C Note) Value at manifold base mounted, 2 position single operating Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) V M1 pc. (Manifold base) 140-G-M2 pcs. (Valve) DXT A1 pc. (Blanking plate assembly) V-4-01-C41 pc. (Manifold base) 140-LZ 1 pc. (Valve) 240-LZ 1 pc. (Valve) DXT A1 pc. (Blanking plate assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. Type 41P Type 4P Single base/b mount Common SUP/Common EXH to 12 stations Base Side Rc 1/8 Rc 1/8 M x 0.8 C4 (One-touch fitting for ø4) Socket: 2 pins MIL, with strain relief (Conforming to MIL-C-80) +COM specifications (For COM specifications, specify them separately.) Flow Characteristics Port size Flow characteristics Manifold 1(P), /(R) 2(B), 4(A) 1 4/2 (P A/B) 4/2 / (A/B R) port port C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv V-41P 1/8 M x SYJ 4 V-4P 1/8 C Note) Value at manifold base mounted, 2 position single operating How to Order Manifold Instruct by specifying the valves, blanking plate assembly and connector assembly to be mounted on the manifold along with the manifold base model no. (Example) V-4P-07-C4 1 pc. (Manifold base) 14-MOZ pcs. (Valve) 24-MOZ pcs. (Valve) DXT192-1-A 1 pc. (Blanking plate assembly) DXT A pcs. (Connector assembly) DXT A pcs. (Connector assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. --7

21 Series 000 Common SUP/Common EXH Type 40 1(P) port Rc 1/8, (R) port 4(A), 2(B) port Rc 1/8 M x 0.8 Note) For more than 8 stations, supply air to both sides of 1(P) port and exhaust air from both sides of /(R) port. How to Order V M Stations 2 stations 20 stations 4(A), 2(B) port size M M x 0.8 1(P), /(R) port thread type Nil Rc F G N NPT Z NPTE Type 41 How to Order V M 4(A), 2(B) port M x 0.8 Type 42 4(A), 2(B) port Rc 1/8, C Type 4 /(R) port Rc 1/8 1(P) port Rc 1/8 /(R) port Rc 1/4 1(P) port Rc 1/ Stations V C Stations 2 stations 20 stations 2 stations 20 stations How to Order How to Order 4(A), 2(B) port size 4(A), 2(B) port size 01 Rc 1 8 C One-touch fitting for ø B7 One-touch fitting for 1/4" 1(P), /(R) port thread type M M x 0.8 Nil Rc F G N NPT Z NPTE 1(P), /(R) port thread type Rc G NPT NPTE V C4 Nil F N Z Applicable solenoid valve G L 4 - M D G - L M D Applicable blanking plate assembly DXT A Applicable individual EXH spacer assembly DXT A Applicable individual SUP spacer assembly (Except V-40 type) DXT A Applicable interface regulator ARBZ P 4(A), 2(B) port /(R) port Rc 1/8 1(P) port Rc 1/ Stations 2 stations 20 stations 4(A), 2(B) port size C4 One-touch fitting for ø4 B One-touch fitting for /2" 1(P), /(R) port thread type Nil F N Z Rc G NPT NPTE Flat ribbon cable type 41P 4(A), 2(B) port M x 0.8 1(P) port Rc 1/8 /(R) port Rc 1/8 Flat ribbon cable type 4P 4(A), 2(B) port C4 1(P) port Rc 1/8 /(R) port Rc 1/ V 41P 0 M 0 12 V 4P 0 C4 Stations How to Order stations 12 stations Stations stations 12 stations How to Order 4(A), 2(B) port size M M x 0.8 Nil F N Z Rc G NPT NPTE 4(A), 2(B) port size C4 One-touch fitting for ø4 B One-touch fitting for /2" 1(P), /(R) port thread type 1(P), /(R) port thread type Nil Rc F G N NPT Z NPTE Applicable solenoid valve 1 4- MOZ 1 - MOZ Applicable blanking plate assembly DXT192-1-A Applicable connector assembly DXT A (For 2 position single) DXT A (For 2 position double, position) 1: 100 VAC, : 110 VAC, 4: DC For How to order applicable connector assemblies, refer to page

22 Port Solenoid Valve Base Mounted Series 000 DIN Rail Manifold DIN Rail Manifold Common SUP/Common EXH Type 4 (Non plug-in type) How to Order Type 4F (Plug-in type) Stations 02 2 stations V 20 stations U D B M How to Order Manifold Specifications Model Type 4 Type 4F Manifold type Stacking type non plug-in type Stacking type plug-in type P(SUP), R(EXH) Common SUP/Common EXH Valve stations 2 to 20 stations A, B port Location Base Porting specifications Direction Side 1(P), /(R) port C8 (One-touch fitting for ø8) Port size C4 (One-touch fitting for ø4) 4(A), 2(B) port C (One-touch fitting for ø) Connector MIL-C-2408 Applicable for JIS-X-101 D-sub connector Internal wiring COM Note) Note) It is available at +COM or COM. Port size Flow characteristics Manifold 1(P), /(R) 2(B), 4(A) 1 4/2 (P A/B) 4/2 / (A/B R) port port C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv C8 C V-4 4 C8 C Note) Value at manifold base mounted, 2 position single operating How to Order Manifold 4 0 D C SUP/EXH block mounting position U side: 2 to 10 stations D side: 2 to 10 stations Both sides: 2 to 20 stations Special specifications For special specifications, indicate separately by the manifold specification sheet. V U D B Connector mounting direction U side: 2 to 10 stations D side: 2 to 10 stations Both sides: 11 to 20 stations Stations 2 stations 20 stations Flow Characteristics Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) V-4FD-0-CC 1 pc. (Manifold base) 14-FZ2 pcs. (Valve) 24-FZ pcs. (Valve) A 1 pc. (Blanking plate assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. Nil B M SUP/EXH block mounting position For 2 to 10 stations : One side (Same as direction of connector mount) For 11 to 20 stations: Both sides For 2 to 10 stations: Both sides Special specifications For special specifications, indicate separately by the manifold specification sheet. C 4(A), 2(B) port size One-touch C4 fitting for ø4 One-touch C fitting for ø M Mixed In the case of mixed specifications (M), indicate separately on the manifold specification sheet. 4F D 0 C C 4(A), 2(B) port size One-touch C4 fitting for ø4 One-touch C fitting for ø M Mixed In the case of mixed specifications (M), indicate separately on the manifold specification sheet. Applicable solenoid valve G 4 - L M D G - L M D Applicable blanking plate assembly A DIN rail length specified Nil Standard length For stations (Specify a longer rail than the 20 For 20 stations standard length.) Applicable solenoid valve 4- FZ Applicable blanking plate assembly A DIN rail length specified Nil Standard length For stations (Specify a longer rail than the 20 For 20 stations standard length.) --9

23 Series 000 Option/Standard Manifold, Flat Ribbon Cable Manifold Combinations of Solenoid Valve, Manifold Gasket and Manifold Base Round head combination screw (With spring washer) Applicable base V-40 V-41 V-42 V-4 V-41P V-4P Gasket DXT (Use caution to the orientation.) Installation of the 00 Valve on the 000 Manifold Use of an adaptor plate makes it possible to mount Series 00 on the manifold base of Series 000. The mounting direction is shown in the diagram below. Mount the solenoid so that it will be on the same side as the single solenoid of the Series (A) port of port valve should be 2(B) port of manifold base. Adapter Plate Assembly DXT200--1A Adapter plate assembly Applicable base V-40 V-41 V-42 V-4 Series 00 Base mounted Blanking Plate Assembly DXT A DXT192-1-A Round head combination screw M2. x 7 (With spring washer) Blanking plate Gasket Applicable base V-40 V-41 V-42 V-4 Round head combination screw M2. x 7 (With spring washer) Blanking plate Gasket Manifold gasket Round head combination screw Adapter plate Dust cap Individual EXH Spacer Assembly DXT A Spring washer for M2. Round head combination screw Corresponding mark Applicable base V-40 V-41 V-42 V-4 Individual SUP Spacer Assembly DXT A Spring washer for M2. Round head combination screw Adapter gasket Applicable base V-41P V-4P Interface regulator (P port regulation) Interface regulator can be placed on top of the manifold base to reduce the pressure of each of the valves. ARBZ P Round head combination screw (With spring washer) Gasket ((R1), (R2) port) --40 Gasket Individual EXH spacer Rc 1/8 (1(P) port) Note) Please contact SMC when using an individual EXH spacer assembly, an individual SUP spacer assembly, an adapter plate assembly, or an interface regulator on 41P and 4P types. Applicable base V-41 V-42 V-4 Individual SUP spacer Caution Gasket Mounting Screw Tightening Torques Applicable base V-40 V-41 V-42 V-4 Before using, refer to page --8. M2.: 0.4 N m

24 Port Solenoid Valve Base Mounted Series 000 Option/DIN Rail Manifold Blanking Plate Assembly A Combination of Solenoid Valve, Gasket and Manifold Base Round head combination screw Round head combination screw Round head combination screw (With spring washer) (With spring washer) (With spring washer) Blanking plate Gasket A Dust cap Applicable base V-4 Round head combination screw (With spring washer) Blanking plate Gasket (Use caution to the orientation.) Gasket DXT (Use caution to the orientation.) Applicable base V-4 SUP Block Disk By installing a SUP block disk in the pressure supply passage of a manifold valve, it is possible to supply two or more different high and low pressures to one manifold A Gasket DXT (Use caution to the orientation.) Applicable base V-4F EXH Block Disk By installing an EXH block disk in the exhaust passage of a manifold valve, it is possible to divide the valve s exhaust so that it does not affect another valve A Applicable Plug Assembly (D-sub connector cable assembly) Caution Applicable base V-4F Mounting Screw Tightening Torques M2.: 0.2 N m (For stacking type manifold) Cable length Assembly part no. 1. m V000-21A-1 m V000-21A-2 m V000-21A- 8 m V000-21A-4 For details, refer to page --8. Component parts Plug MIL standard Number of terminals: 2 Cable: 2 cores x 0. mm

25 Series 000 Exploded View/DIN Rail Manifold Type 4 Manifold r w U side r q e w (b) Lever e (a) Bolt (Both sides) Replacement Parts No. Description Part no. q Manifold block C A-2- C assembly w e SUP/EXH block assembly End block assembly 000-1A A-2D r End block assembly 000-2A-2U Note C4: A, B port with One-touch fitting for ø4 C: A, B port with One-touch fitting for ø P/R port with One-touch fitting for ø8 For D side For U side DIN rail D side (a) Bolt (Both sides) How to Increase Manifold Base (1) Loosen (both) bolts (a), which are securing the manifold onto the DIN rail, 1 to 2 turns. (To remove the manifold base from the DIN rail, loosen the bolts 4 to turns.) (2) Press lever (b) to disconnect the manifold block assembly at the location in which you wish to place an additional manifold block assembly. (However, there are no levers between q and r or between w and r. They can be disconnected by merely pulling them apart.) Station expansion is possible at any position. Fig. (1) (a) Bolt (Both sides) () Mount additional manifold block assembly on the DIN rail as shown in the Fig. (2). (4) Press the block assemblies and tighten the bolts (a) to fix them to the DIN rail. Note) When there are 10 or fewer manifold block assemblies, and more are added to make a total of 11 or more, a supply/exhaust block assembly must also be added. Fig. (2) Hook this part onto the DIN rail, and press down in the direction of the arrow. (b) Lever --42

26 Port Solenoid Valve Base Mounted Series 000 Exploded View/DIN Rail Manifold Type 4F Manifold w e i t U side q y Location of addition Replacement Parts No. Description Part no. q Manifold block assembly 000-0A-1- Note C4: A, B port One-touch fitting for ø4 C: A, B port One-touch fitting for ø w SUP/EXH block assembly 000-1A-1D For D side, With D-sub connector and P/R port with One-touch fitting for ø8 e SUP/EXH block assembly 000-1A-1U For U side, With D-sub connector and P/R port with One-touch fitting for ø8 r End block assembly 000-2A-2D For D side, set with w t End block assembly 000-2A-1U For U side y End block assembly 000-2A-1D For D side u End block assembly 000-2A-2U For U side, set with e i SUP/EXH block assembly 000-1A-1M Without D-sub connector For indicated location C4 C (b) Lever w r DIN rail (a) Bolt (Both sides) D side (a) Bolt (Both sides) How to Increase Manifold Base (1) Loosen (both) bolts (a), which are securing the manifold onto the DIN rail, 1 to 2 turns. (To remove the manifold base from the DIN rail, loosen the bolts 4 to turns.) To add a manifold block assembly, add it to the U side so that the terminal number of the D-sub connector and the valve link position will be in accordance with the circuit diagram. Housing cover Fig. (2) Hook this part onto the DIN rail and press down until a click is heard. (2) Using a flat screwdriver, press lever (b) to disengage the link of the manifold block assembly on the U side or the D side from the SUP/EXH block assembly or from the end block assembly. (However, there are no levers between t and q. They can be disconnected by merely pulling them apart.) () Remove the housing cover from the D-sub connector portion of the SUP/EXH block assembly. (Refer to Fig. (1).) (4) Following the procedure shown in Fig. (2), mount the manifold block assembly to be added onto the DIN rail. As shown in Fig. (), insert the pin of the lead wire assembly into the D-sub connector, and attach the round crimped terminal to the screw that connects the wires. () Press the block assemblies and tighten the bolts (a) to fix them to the DIN rail. Note) When there are 10 or fewer manifold block assemblies, and more are added to make a total of 11 or more, a supply/exhaust block assembly must also be added. Fig. (1) Black White Lead wire ass'y Hook D-sub connector (b) Lever Connector terminal no. U side Pin After inserting the pin, lightly pull on the lead wire to verify the lock. Stations Housing side D side Fig. () How to insert lead ( ) is for the case of a wire assembly pin D-sub connector for both sides (FB type). 1 station (11 stations) 2 station (12 stations) station (1 stations) 4 station (14 stations) station (1 stations) station (1 stations) 7 station (17 stations) 8 station (18 stations) 9 station (19 stations) 10 station (20 stations) B side coil A side coil B side coil A side coil B side coil A side coil B side coil A side coil B side coil A side coil B side coil A side coil B side coil A side coil B side coil A side coil B side coil A side coil B side coil A side coil Terminal Lead no. wire color Black White Black White Black White Black White Black White Black White Black White Black White Black White Black White Red Red --4

27 Series 000 Type 40 Manifold: Bottom Ported V-40- Station 2-M Grommet (G), (H) (Mounting hole) -Rc 1/8 (1(P), /(R) port) (Non-locking) G: 00 mm H: 00 mm M x 0.8 (PE port) (4(A), 2(B) port) (mm) Stations 2 L L L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers MAX. 10 Applicable cable O.D. ø. to ø7 MAX. 11 : With light/surge voltage suppressor --44

28 Port Solenoid Valve Base Mounted Series 000 Grommet (G), (H) Type 41 Manifold: Side Ported V-41- Station 1-M (Non-locking) M x 0.8 (PE port) With filter (Mounting hole) (1(P), /(R) port) G: 00 mm H: 00 mm (4(A), 2(B) port) (mm) Stations 2 L1 2 8 L L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers MAX. 11 MAX. 10 Applicable cable O.D. ø. to ø7 : With light/surge voltage suppressor --4

29 Series 000 Type 42 Manifold: Side Ported V-42- Station 1-01 Grommet (G), (H) (Non-locking) M x 0.8 (PE port) (Mounting hole) 4-Rc 1/4 (1(P), /(R) port) G: 00 mm H: 00 mm 2n-Rc 1/8 (4(A), 2(B) port) 24. P=17 (mm) Stations 2 L1 8 L L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers MAX. 11 MAX. 10 Applicable cable O.D. ø. to ø7 : With light/surge voltage suppressor --4

30 Port Solenoid Valve Base Mounted Series 000 Type 42 Manifold: Side Ported V-42- Station 1-C Grommet (G), (H) (Non-locking) M x 0.8 (PE port) MAX.. (One-touch fitting) (Mounting hole) 4-Rc 1/4 (1(P), /(R) port) G: 00 mm H: 00 mm 2n-One-touch fitting (4(A), 2(B) port) Applicable tubing model: T004 Stations 2 L1 81 L (mm) L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers MAX. 11 MAX. 10 Applicable cable O.D. ø. to ø7 : With light/surge voltage suppressor --47

31 Series 000 Type 4 Manifold: Side Ported Grommet (G), (H) V-4- Station 1-C4 (Non-locking) (PE port) (Mounting hole) G: 00 mm H: 00 mm 4-Rc 1/8 (1(P), /(R) port) Stations 2 L1 2 8 L n-One-touch fitting (4(A), 2(B) port) Applicable tubing model: T (mm) L plug connector (L) M plug connector (M) DIN terminal (D) Built-in speed controllers MAX. 11 MAX. 10 Applicable cable O.D. ø. to ø7 : With light/surge voltage suppressor --48

32 Port Solenoid Valve Base Mounted Series 000 Type 41P Flat Ribbon Cable Manifold: Side Ported V-41P- Station -M 2n-M x 0.8 (4(A), 2(B) port) (Light/Surge voltage suppressor) A side 4-Rc 1/8 (1(P), /(R) port) (Mounting hole) (Non-locking) Triangle mark (Station n) (Station 1) B side Connector polarity indicator Applicable connector: 2 pins MIL (Conforming to MIL-C-80) (mm) Built-in speed controllers Stations 4 L1 L

33 Series 000 Type 4P Flat Ribbon Cable Manifold: Side Ported V-4P- Station -C4 2n-One-touch fitting (4(A), 2(B) port) Applicable tubing model: T042 (Light/Surge voltage suppressor) A side MAX. Triangle mark 4-Rc 1/8 (1(P), /(R) port) 2-ø. (Mounting hole) (Non-locking) B side (mm) Built-in speed controllers Stations 4 L1 L MAX

34 Port Solenoid Valve Base Mounted Series 000 Grommet (G), (H) 2n-One-touch fitting (A, B port) Applicable tubing model C: T004 Stations L1 L2 L L4 U side DIN rail DIN rail holding screw Type 4 DIN Rail Manifold (Non Plug-in): Side Ported V-4- Station D- C4C CC Manual override (Non-locking) (Rail mounting hole pitch 12.) (Station n) (Station 1) One-touch fitting port (P, R port) Applicable tubing model: T080 Separation lever (Push type) D side (mm) C4 2n-One-touch fitting (A, B port) Applicable tubing model C4: T042 G: 00 H: 00 V-4- Station B- C4C CC (mm) Stations L L L L (mm) Stations L L L L V-4- Station U- C4C CC L plug connector (L) M plug connector (M) MAX. 10 DIN terminal (D) Applicable cable O.D. ø. to ø7 : With light/surge voltage suppressor Stations L1 L2 L L (mm)

35 Series 000 2n-One-touch fitting (A, B port) Applicable tubing model C: T004 Type 4F DIN Rail Manifold (Non Plug-in): Side Ported V-4FD- Station - C4C CC C4 2n-One-touch fitting (A, B port) Applicable tubing model C4: T042 One-touch fitting port (P, R port) Applicable tubing model: T080 U side D side DIN rail DIN rail holding screw Manual override (Non-locking) Terminal no. 1 JIS-X-101 Applicable connector D-SUB { MIL-C-2408} (Rail mounting hole pitch 12.) V-4FU- Station - C4C CC (Station n)(station 1) Separation lever (Push type) D side connector Stations L1 L2 L L V-4F U C4C D- Station B- CC (2 to 10 stations) V-4FB- Station - C4C CC (11 to 20 stations) (mm) Stations L1 L2 L L (mm) Stations L1 L2 L L4 Stations L1 L2 L L (mm) (mm)

36 Series Made to Order Specifications: Please contact SMC for detailed specifications, dimensions, and delivery. 1. Solenoid Valve: External Pilot Specifications Applicable solenoid valve series 000/000 (Non plug-in type only) Model no. 0 ( ) X20 Specifications Entry is the same as standard products. Operating pressure Main pressure range (MPa) External pilot pressure Pilot exhaust method Dimensions 000: 8 mm longer 000: 8 mm longer 100 kpa to to 0.7 Pilot valve individual exhaust JIS Symbol Body ported 2 position single position closed center 2 position double position exhaust center position pressure center --8

37 Series Made to Order Specifications: Please contact SMC for detailed specifications, dimensions, and delivery. 2. Solenoid Valve: Special Manual Override. Solenoid Valve: Opposite Mount of Solenoid Assembly Applicable solenoid valve series 000 (Non plug-in type only) Model no. Applicable solenoid valve series 1000/000/000 (Non plug-in type only) Model no. A ( ) ( ) X1 1 Dimensions: Single Push type A Entry is the same as standard products. A E Push type A Push-locking type E Entry is the same as standard products. Dimensions: G-M-X1 (Push type A) (Non-locking) (Mounting hole for manifold) Push-locking type E (Piping port) (Push-locking type E) ( ) Pressing makes the valve operate. The valve can be locked in the manual override position by turning it to the direction that the arrow shows while keeping it pressed. If it is not turned, it can be used as a non-locking push type. Caution When operating the lock with the driver, use a watchmakers screwdriver and turn lightly. (Torque: 0.1 N m or less) Note) Because the manual override unit protrudes, the manual override could activate unintentionally if the protrusion is touched or an object falls on it. Therefore, take the proper preventative measures. --8

38 Series Made to Order Specifications: Please contact SMC for detailed specifications, dimensions, and delivery. 4. Manifold: Common SUP/Individual EXH Type Applicable solenoid valve series 000 Common SUP/Individual EXH type V-21- Specification Common SUP/Individual EXH type 1(P) port Rc /(R) port M x 0.8 4(A), 2(B) port Valve Dimensions: Grommet Type Model no. 1 8 V 21 0 Stations 02 2 stations 20 stations Applicable solenoid valve G 2 - L M M - C4 D C Applicable blanking plate assembly DXT A Applicable throttle valve DXT14-4-1A Applicable silencer AN120-M Note) Refer to page --2 for manifold option. Note) To use the 2 with a throttle valve mounted on it, open the throttle valve one turn or more from the fully closed position. 20 (Non-locking) P port thread type Nil Rc 00F G 00N NPT 00T NPTF M x 0.8 (PE port) 4-ø4. Mounting hole (4(A), 2(B) port) 2-Rc 1/8 (1(P) port) Stations 2 L1 0 L ((R1), (R2) port) (mm)

Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Type of actuation. Option.

Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Type of actuation. Option. Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Body option Body

More information

Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L

Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body

More information

Exhausting equipment for pilot valve not required. Common exhaust port for main and pilot valve (VF1000/3000)

Exhausting equipment for pilot valve not required. Common exhaust port for main and pilot valve (VF1000/3000) 5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000/3000/5000 Large flow capacity Yet compact size. Low power consumption 1.8 W (DC) Exhausting equipment for pilot valve not required. Common exhaust

More information

5 Port Solenoid Valve

5 Port Solenoid Valve 5 Port Solenoid Valve Series VFR//4/5/6 Rubber Seal Series Variations Series Sonic conductance C [dm /(s bar)] Type of actuation Voltage position single type Passage: 4/ 5/ (A/B EA/EB) Electrical entry

More information

5 Port Direct Operated Poppet Solenoid Valve, Rubber Seal

5 Port Direct Operated Poppet Solenoid Valve, Rubber Seal Port Direct Operated Poppet Solenoid Valve, Rubber Seal Series 3000 or details about certified products conforming to international standards, visit us at www.smcworld.com. C: 0.4 dm 3 /(s bar) (Passage

More information

5 Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in. Standard Specifications. Fluid Operating pressure range

5 Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in. Standard Specifications. Fluid Operating pressure range For details about certified products conforming to international standards, visit us at www.smcworld.com. Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in Series VFR2 JIS Symbol type

More information

Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4

Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4 Type of actuation 4 Piping 0 Side ported Bottom ported 4 Without sub-plate Large Size 5 Port Solenoid Valve Rubber Seal Series 50/4 70 Series VP 5 port solenoid valve 5 7 position single position double

More information

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range (1) Response time 3 position (2) Enclosure

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range (1) Response time 3 position (2) Enclosure For details about certified products conforming to international standards, visit us at www.smcworld.com. Port Pilot Operated Solenoid Valve Series 000 Compact and lightweight: 3 mm width Compact yet provides

More information

5 Port Solenoid Valve Direct Operated Poppet Type. Specifications

5 Port Solenoid Valve Direct Operated Poppet Type. Specifications Port Solenoid Valve Direct Operated Poppet Type 000 Series Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W

More information

3 Port Solenoid Valve Direct Operated Poppet Type

3 Port Solenoid Valve Direct Operated Poppet Type 3 Port Solenoid Valve Direct Operated Poppet Type VK300 Series Rubber Seal [Option] Universal porting Available for N.C. valve, N.O. valve, divider valve, selector valve, etc. C: 0.80 dm 3 /(s bar) (Passage

More information

5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)

5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2) For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series VFS3000 Model position 3 position

More information

Specifications. Fluid Ambient and fluid temperature ( C)

Specifications. Fluid Ambient and fluid temperature ( C) Series 0-V00 Rubber seal port direct operated solenoid valve Specifications Fluid Ambient and fluid temperature ( C) Note ) Response time (DC) ms Max. operating frequency (Hz) Manual override Lubrication

More information

(Standard) 100 VAC, 50/60 Hz 200 VAC, 50/60 Hz 24 VDC

(Standard) 100 VAC, 50/60 Hz 200 VAC, 50/60 Hz 24 VDC 5 Port Pilot Operated Solenoid Valve Metal Seal Series VZS Series Variations Plug-in Type Base Mounted Type (With sub-plate) Non Plug-in Type Base Mounted Type (With sub-plate) Series Sonic conductance

More information

3 Port Solenoid Valve

3 Port Solenoid Valve Port Solenoid Valve V00 Series Rubber Seal Power consumption 0. W (with power saving circuit) Note) Refer to page 7 for details. temperature rises: C (with power saving circuit) Sonic conductance Series

More information

5 Port Solenoid Valve Direct Operated Poppet Type. Specifications

5 Port Solenoid Valve Direct Operated Poppet Type. Specifications Port Solenoid Valve Direct Operated Poppet Type Series 000 Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W

More information

Grommet (G) (Standard) 100 VAC, 50/60 Hz 200 VAC, 50/60 Hz 24 VDC

Grommet (G) (Standard) 100 VAC, 50/60 Hz 200 VAC, 50/60 Hz 24 VDC 5 Port Pilot Operated Solenoid Valve Metal Seal Series S Series Variations Body Ported Base Mounted Series S000 S000 S000 S000 S000 S4000 S5000 Sonic conductance C [dm /s bar)] 4/ 5/(A/B R/R) Single Double.8.4

More information

5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported

5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series VFS2000 Model 2 position 3

More information

5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in. Flow characteristics (1) 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)

5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in. Flow characteristics (1) 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2) For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model 2 position 3 position

More information

5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in

5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model position 3 position

More information

3 Port Solenoid Valve Direct Operated Poppet Type 02 1 G VT325. For manifold: Enter VO. Valve option. Nil Standard V For vacuum Option.

3 Port Solenoid Valve Direct Operated Poppet Type 02 1 G VT325. For manifold: Enter VO. Valve option. Nil Standard V For vacuum Option. 3 Port Solenoid Valve Direct Operated Poppet Type Series VT325 Rubber Seal [Option] Note) Applicable only for DIN terminal type. Compact yet provides a large flow capacity Dimensions (W x H x D) 55 x 118

More information

Series VFR Port Pilot Operated Solenoid ValveRubber Seal, Plug-in/Non

Series VFR Port Pilot Operated Solenoid ValveRubber Seal, Plug-in/Non Table of Contents Series Port Pilot Operated Solenoid ValveRubber Seal... Series Variations... Manifold Variations... Precautions... Series 000 Port Pilot Operated Solenoid ValveRubber Seal, Plug-in/Non

More information

Manual override. Non-locking push type (Tool required) Nil: B: Locking type (Tool required) C: Locking type (Manual) Electrical entry

Manual override. Non-locking push type (Tool required) Nil: B: Locking type (Tool required) C: Locking type (Manual) Electrical entry Plug-in nit Series 0 1 2 3 4 Series Type of actuation Metal Rubber 2 position single 3 position closed 3 position pressure Manifold Option How to Order Valves VQ 1 1 1 0 Y 5 LO Body type 1 0 1 Seal Metal

More information

2 position single 2 position double. 3 position Ambient and fluid temperature ( C) Note 1) 3 position Max. operating

2 position single 2 position double. 3 position Ambient and fluid temperature ( C) Note 1) 3 position Max. operating / ort Solenoid Valve ubber Seal Series SYJ000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Specifications JIS Symbol port port (manifold) position

More information

Fluid Internal pilot Operating pressure range (MPa) External pilot Operating pressure range (MPa) 2 position single

Fluid Internal pilot Operating pressure range (MPa) External pilot Operating pressure range (MPa) 2 position single Valve Manifold Common Specifications Solenoid Valve Specifications Made to Order Specifications (For details, refer to page --08.) JIS Symbol position single solenoid position double solenoid position

More information

Series SYA3000/5000/7000

Series SYA3000/5000/7000 1 Port Air Operated Valve Series SYA000/000/7000 Body ported Base mounted Base mounted How to Order A, B port size Thread type Thread piping (Inch size) Nil Rc Symbol Port size Applicable series Symbol

More information

5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in. Flow characteristics (1) 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)

5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in. Flow characteristics (1) 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2) For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model position 3 position

More information

Series VP3145/3165/3185

Series VP3145/3165/3185 Large flow capacity, small exhaust resistance (Refer to Flow Characteristic table.) Easy conversion to N.C. or N.O. N.C. N.C. X (P) N.O. N.O. X (P) Series VP 3 port Function plate makes it possible to

More information

3 Port Solenoid Valve Direct Operated Poppet Type. Body type. T Body ported O Manifold. Valve option

3 Port Solenoid Valve Direct Operated Poppet Type. Body type. T Body ported O Manifold. Valve option 3 Port Solenoid Valve Direct Operated Poppet Type VT317 Series Rubber Seal [Option] Note) CE-compliant: Electrical entry is applicable only for the DIN terminal. Compact yet provides a large flow capacity

More information

3 Port Solenoid Valve Direct Operated Poppet Type. Body type. Body ported. Manifold. Valve option

3 Port Solenoid Valve Direct Operated Poppet Type. Body type. Body ported. Manifold. Valve option Port Solenoid Valve Direct Operated Poppet ype Series V17 Rubber Seal [Option] Compact yet provides a large flow capacity Dimensions (W x H x D) 45 x 89.5 x 45 (Grommet) C:.6 dm /(s bar) (Passage ) Suitable

More information

Series VQ Port Solenoid Valve

Series VQ Port Solenoid Valve Port Solenoid Valve Series VQ00 Outstandingly high speed, stable response, and long service life. ON:. ms, OFF: ms, Dispension accuracy ms (; supply pressure 0. MPa) 00 million cycles or more (Factors

More information

5 Port Air Operated Valve

5 Port Air Operated Valve Port ir Operated Valve Series VF000/000/000 RoHS 22- Series VF000/000/000 Model Selection by Operating Conditions q ir Operated Valve: Single Unit Series Sonic conductance C[dm /(s bar)] Type of actuation

More information

D-sub connector. Type 60F. Manifold 1 (P: SUP), 3/5 (R: EXH) Valve stations (With power terminal) D-sub connector

D-sub connector. Type 60F. Manifold 1 (P: SUP), 3/5 (R: EXH) Valve stations (With power terminal) D-sub connector Series 0-SZ000 Port Solenoid Valve Cassette Type Manifold Series 0-SZ000 / Plug-in Type Model Manifold (P: SUP), / (R: EXH) Valve stations (With power terminal) pplicable connector Internal wiring (),

More information

Series VP3145/3165/3185

Series VP3145/3165/3185 Large Size 3 Port Solenoid Valve Series VP345/365/385 Rubber Seal Large flow capacity, small exhaust resistance (Refer to Flow Characteristic table.) Easy conversion to N.C. or N.O. Function plate makes

More information

Series VKF300 VV061 V100 S070 VQD VKF VK VT VS

Series VKF300 VV061 V100 S070 VQD VKF VK VT VS Rubber Seal 3 Port Solenoid Valve Series VKF300 Direct Operated Poppet Type Compact yet provides a large flow capacity Body width 18 mm Various manifold piping directions Output port: Manifold set-up allowing

More information

3 Port Solenoid Valve

3 Port Solenoid Valve Port Solenoid Valve Series VQ00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, C 9080-0-Main Office: (0) 88-900-Outside Local rea: (800) 8-900-www.stevenengineering.com Outstandingly

More information

Flow characteristics Max. (1) b Standard Specifications. P Manual override.

Flow characteristics Max. (1) b Standard Specifications. P Manual override. Port Direct Operated Solenoid Valve Series 0 Metal Seal Model Number of positions (Single) (Double) ( position) JIS Symbol Model Port size Rc (Nominal size) 0-0 8 ( A) 0- ( 8A) 0-0 8 (0A) 0-0 8 ( A) 0-

More information

10 mm. 7.5 mm. 40 mm. 4 Port Solenoid Valve. Series SJ2000/3000 SJ3000 SJ2000. Cassette Type Manifold. Connecter connection

10 mm. 7.5 mm. 40 mm. 4 Port Solenoid Valve. Series SJ2000/3000 SJ3000 SJ2000. Cassette Type Manifold. Connecter connection Rubber Seal Port Solenoid Valve Series SJ000/000 Cassette Type Manifold 0 mm 7. mm (SJ000) 0 mm (SJ000) Non plug-in type Individual wiring manifold SJ000 SJ000 Can be mounted together. Connecter connection

More information

How to Order L B. Pilot type. Nil. U side D side. Stations 3 2 1

How to Order L B. Pilot type. Nil. U side D side. Stations 3 2 1 Port Solenoid Valve Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Non plug-in manifold 0 0 S 60 Stations stations 0 stations SUP/EXH

More information

1.8 w. 3 Port Solenoid Valve. VT307 Series. Direct Operated Poppet Type. Power consumption. A single valve with various valve functions

1.8 w. 3 Port Solenoid Valve. VT307 Series. Direct Operated Poppet Type. Power consumption. A single valve with various valve functions Port Solenoid Valve VT07 Series Direct Operated Poppet Type Power consumption 4 Standard wtype (Current product: 4.8 W) Energy-saving type.8 w (Current product: 2 W) Vacuum applications 0.2 kpa [Option]

More information

3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot

3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot 3 Port Solenoid Valve Pilot Operated Poppet Type Series VG342 Rubber Seal [Option] Low power consumption 4.8 W DC (Standard type) 2 W DC (Energy-saving type) No lubrication required Possible to use in

More information

4 Port Solenoid Valve Cassette Type Manifold Rubber Seal

4 Port Solenoid Valve Cassette Type Manifold Rubber Seal Port Solenoid Valve Cassette Type Manifold Rubber Seal 7.mm (SJ000) SJ000 SJ000 Can be mounted together. 0mm (SJ000) Connector connection New New cable type manifold is added! New Additional options are

More information

Manifold Specifications

Manifold Specifications Specifications Specifications Base mounted VVFR-01 VVFR- VVFR-0 Wiring With terminal block With multi-connector With D-sub connector Grommet terminal DIN terminal Grommet Grommet terminal Conduit terminal

More information

3 Port Air Operated Valve

3 Port Air Operated Valve Port Air Operated Valve 00/500/00 Series RoHS 1555 00/500/00 Series Model Selection by Operating Conditions q Air Operated Valve: Single Unit Series Sonic conductance C [dm /(s bar)] Type of actuation

More information

Series SYA3000/5000/7000

Series SYA3000/5000/7000 Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) Nil Rc Symbol Port size Applicable series Symbol Port size Applicable series F G M SYA000

More information

Series SY3000/5000/7000

Series SY3000/5000/7000 Type20P 5 Port Solenoid Valve ody Ported Manifold ar Stock Type/Flat Ribbon Cable Series SY3000/5000/7000 How to Order Manifold How to Order Manifold ssembly (Example) SS5Y 5 20P 05 Manifold series 3 SY3000

More information

Base Mounted Metal Seal/Rubber Seal VQ0000 (VV5Q05) VQ1000 (VV5Q11) Individual SUP spacer. Individual EXH spacer

Base Mounted Metal Seal/Rubber Seal VQ0000 (VV5Q05) VQ1000 (VV5Q11) Individual SUP spacer. Individual EXH spacer Base Mounted Metal Seal/Rubber Seal VQ Built-in silencer, direct exhaust Space-saving profile All pilot valves are compactly mounted on one side. The space-saving design of mounting all fittings on one

More information

Series SV1000/2000/3000/4000

Series SV1000/2000/3000/4000 Valve/Sub-plate Type IP67 Compliant Series 000/000/000/000 How to Order C () () () () () () (E) (E) () (E) (E) () () (E) (E) () () (E) (E) () () (E) (E) Type of actuation position single position double

More information

Series SYA3000/5000/7000

Series SYA3000/5000/7000 Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) - Rc Symbol Port size Applicable series Symbol Port size Applicable series F G SYA000 N

More information

Series SYA3000/5000/7000

Series SYA3000/5000/7000 Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) Nil Rc Symbol Port size Applicable series Symbol Port size Applicable series F G M SYA000

More information

4/5 Port Solenoid Valve

4/5 Port Solenoid Valve CT.ES8 / ort Solenoid Valve Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M.7 to M2. 앬 Flow Characteristics Series Cover (stainless

More information

Rubber Seal VP300/500/700

Rubber Seal VP300/500/700 Port Pilot Operated Poppet Rubber Seal 00/500/700 High flow capacity Cv1.0 (00), Cv. (500), Cv.0 (700) Low power consumption: 1.8W(DC) Possible to use as either selector valve or divider valve Changeable

More information

Power Valve: Regulator Valve. Specifications. Model VEX Operation type Fluid Max. operating pressure Set pressure Air operated.

Power Valve: Regulator Valve. Specifications. Model VEX Operation type Fluid Max. operating pressure Set pressure Air operated. Power Valve: Regulator Valve Series Large capacity relief regulator Rapid tank internal pressure setting, air blow, constant pressure supply and driving, balance and driving, steps directional control

More information

New Concept Connector Type Manifold

New Concept Connector Type Manifold New Concept Connector Type Manifold Series /000/3000/000 The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration.

More information

Rubber seal 3 Port Pilot Solenoid Valve. Specifications. Fluid Operating pressure range MPa. Internal pilot

Rubber seal 3 Port Pilot Solenoid Valve. Specifications. Fluid Operating pressure range MPa. Internal pilot ubber seal ort ilot Solenoid Valve Series SYJ00 Specifications efer to www.smcworld.com for details of products compatible with overseas standards. Body ported Base mounted Fluid Operating pressure range

More information

Series SY3000/5000/7000

Series SY3000/5000/7000 Type1P Type2P 5 Port Solenoid Valve ase Mounted Manifold ar Stock Type/Flat Ribbon Cable Series /5000/000 How to Order Manifold Type 1P/Compact style SS5Y 5 1P 05 C8 Manifold series 3 5, port size Thread

More information

Series SJ3A6. Vacuum Release Valve with Restrictor P.86 P.90. D-sub Connector Flat Ribbon Cable PC Wiring Serial Wiring: EX180 Serial Wiring: EX510

Series SJ3A6. Vacuum Release Valve with Restrictor P.86 P.90. D-sub Connector Flat Ribbon Cable PC Wiring Serial Wiring: EX180 Serial Wiring: EX510 Vacuum Release Valve with Restrictor Series SJ3A6 SJ Plug-in Type Connector Connection P.86 D-sub Connector Flat Ribbon Cable PC Wiring Serial Wiring: EX180 Serial Wiring: EX510 Non Plug-in Type Individual

More information

Manifold Specifications

Manifold Specifications Series 00 Manifold Specifications Manifold Specifications Model Manifold type P(SUP)/R(EXH) Valve stations A port porting specifications Port size For internal pilot For external pilot Location Direction

More information

Example. U side. Stations SY5000

Example. U side. Stations SY5000 45 Type 5 ort Solenoid Valve ase Mounted Manifold Stacking Type/DIN ail Mounted/Individual Wiring Series SY3000/5000 How to Order Manifold How to Order Manifold ssembly (Example) SS5Y 3 45 05 U C6 Example

More information

Pilot Operated 2 Port Solenoid Valve for Dry Air

Pilot Operated 2 Port Solenoid Valve for Dry Air Pilot Operated Port Solenoid Valve for Dry ir VQ0/30 Series Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 Series VCH VDW SX0

More information

Power Consumption. 4/5 Port Solenoid Valve. Series SYJ3000/5000/7000. With Power Saving Circuit

Power Consumption. 4/5 Port Solenoid Valve. Series SYJ3000/5000/7000. With Power Saving Circuit CT.EUS8 UK ower Consumption / ort Solenoid Valve With ower Saving Circuit Series SYJ000/000/7000 Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced

More information

3 Port Direct Operated Poppet Rubber Seal. Standard Continuous duty Energy saving Vacuum Energy saving/vacuum

3 Port Direct Operated Poppet Rubber Seal. Standard Continuous duty Energy saving Vacuum Energy saving/vacuum 3 Port Direct Operated Poppet Rubber Seal Series 307 Large Flow Capacity, yet Compact Size. Dimensions (W X H X D) 30 X 54.5 X 33 307 Nl/min 206.02 or more, 1/4 Low Power Consumption /VO307 4.8W DC/Standard

More information

Pilot Operated 2 Port Solenoid Valve for Dry Air

Pilot Operated 2 Port Solenoid Valve for Dry Air Pilot Operated Port Solenoid Valve for Dry Air Series VQ0/30 Compact and lightweight with large flow capacity VQ0 Mass (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 High frequency operation possible

More information

How to Order Manifold FD2. Manifold mounting. D DIN rail mount style Note) E Direct mount style. Note) C kit of SQ2000 only. Cable specifications

How to Order Manifold FD2. Manifold mounting. D DIN rail mount style Note) E Direct mount style. Note) C kit of SQ2000 only. Cable specifications For details about certified products conforming to international standards, visit us at www.smcworld.com. Series SQ000 Plug Lead Unit How to Order Manifold SSQ 0 FD D Electrical entry F kit D-sub Connector

More information

5 Port Solenoid Valve/Direct Poppet. Valve model VK3120. VK3120Y (Low wattage 2W DC) VK3140 VK3140Y (Low wattage 2W DC)

5 Port Solenoid Valve/Direct Poppet. Valve model VK3120. VK3120Y (Low wattage 2W DC) VK3140 VK3140Y (Low wattage 2W DC) Port Solenoid Valve/Direct Poppet Rubber seal Series VK3000 Nl/min 147 Compact/Width 18 X Length 8 (mm) Low power consumption 4W DC (Standard) 2W DC (Energy saver) Standard copper free specification All

More information

3 Port Solenoid Valve

3 Port Solenoid Valve ubber Seal 3 ort Solenoid Valve Series SYJ300/00/700 SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M. V3 Cover

More information

Manifold Specifications Stacking Type

Manifold Specifications Stacking Type Specifications Stacking Type Keeps environmental air clean from pilot exhaust Use of the VV5FS- manifold can exhaust intensively the pilot exhaust gas to the base side, and can prevent environmental aggravation

More information

5 Port Pilot Solenoid Valve Rubber Seal

5 Port Pilot Solenoid Valve Rubber Seal 5 Port Pilot Solenoid Valve Rubber Seal VF1000/3000/5000 Large flow capacity, Yet compact size. Low power consumption. 1.8WDC Exhausting equipment for pilot valve not required. Common exhaust for main

More information

Vacuum applications possible (up to 100kPa) Base mounted. Cylinder bore size (mm) Series CM2. Pressure: 0.5MPa Load ratio: 50% Cylinder stroke: 300mm

Vacuum applications possible (up to 100kPa) Base mounted. Cylinder bore size (mm) Series CM2. Pressure: 0.5MPa Load ratio: 50% Cylinder stroke: 300mm 4 Port Direct Operated Poppet Solenoid Valve Series D1000 High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure

More information

Power Valve: Regulator Valve. Specifications. Model VEX Operation type Fluid Max. operating pressure Set pressure Air operated.

Power Valve: Regulator Valve. Specifications. Model VEX Operation type Fluid Max. operating pressure Set pressure Air operated. Power Valve: Regulator Valve Series 1 Large capacity relief regulator Rapid tank internal pressure setting, air blow, constant pressure supply and driving, balance and driving, steps directional control

More information

4/5 Port Solenoid Valve

4/5 Port Solenoid Valve ubber Seal / ort Solenoid Valve Series 000 / 000 / 000 [Option] SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread

More information

Body width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S.

Body width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S. High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure of 0.5MPa, subject to clean, dry air) 4 Port Direct

More information

5 Port Solenoid Valve. High speed response type) Series. Body ported VQZ1 2 VQZ2 2 VQZ3 2 VQZ1 5 VQZ2 5 VQZ3 5. Base mounted

5 Port Solenoid Valve. High speed response type) Series. Body ported VQZ1 2 VQZ2 2 VQZ3 2 VQZ1 5 VQZ2 5 VQZ3 5. Base mounted Metal Seal ort Solenoid Valve Series // Rubber Seal.. ower consumption:. W/. W Compact, High Flow Series Valve width (mm) (Standard) (High pressure type, High speed response type) ody ported ase mounted

More information

10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry

10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry Series 0-VQ00 port solenoid valve How to Order Valves 0 VQ 0 F ir cylinder Clean series Series VQ Compact port valve Type of actuation Normally closed Note) Normally open Note) Normally open type is available

More information

3 Port Solenoid Valve

3 Port Solenoid Valve 3 ort Solenoid Valve Series VKF300 ubber Seal Direct Operated oppet Type Compact yet provides a large flow capacity Body width 8 mm vailable in vacuum applications ( 0. ka) Can be used in vacuum/release

More information

5 Port Solenoid Valve Plug Lead Type

5 Port Solenoid Valve Plug Lead Type 5 Port Solenoid alve Plug Lead Type Series Body Ported Flow rate characteristics For single/double solenoid C [dm 3 /(s bar)]: 0.6 Single Unit alve width: 7.4 mm Possible to drive cylinders: Up to ø32

More information

SS5Y 3 05 U C6. Series SY3000/5000 Base Mounted Monifold Stacking Type/DIN Rail Mounted Individual Wiring

SS5Y 3 05 U C6. Series SY3000/5000 Base Mounted Monifold Stacking Type/DIN Rail Mounted Individual Wiring Type4 SY000/000 ase Mounted Monifold Stacking Type/DIN ail Mounted Individual Wiring How to Order Manifold SSY 4 0 U C6 How to Order Valve Manifold ssembly Ordering example SY000 SY000 Valve stations 02

More information

Power Valve: Economy Valve. Standard Specifications. Model VEX55-04

Power Valve: Economy Valve. Standard Specifications. Model VEX55-04 Three functions (pressure regulator, switching valve, and speed controller) are provided by a single valve. The conventional valve combination circuit has been condensed into a single valve. A large capacity

More information

5 Port Air Operated Valve. How to Order. Port size. (A, B port) R port of VFA3 70 is 1/4.

5 Port Air Operated Valve. How to Order. Port size. (A, B port) R port of VFA3 70 is 1/4. Port Air Operated Valve Series VFA000 How to Order Body ported single solenoid Foot bracket VFA22 Port size (P, A, B port) 0 8 4 R, R2 port are /8. F Thread type (Including pilot port) F N T Rc G NPT NPTF

More information

1 station. 3 Port Solenoid Valve. VV100 Series. Highly Integrated Unit Manifold

1 station. 3 Port Solenoid Valve. VV100 Series. Highly Integrated Unit Manifold Port Solenoid Valve VV00 Series Highly Integrated Unit Manifold po ted - pera irect-o d station es on rt valv ally ividu Ind wired n be ve ca val d. adde ector Con-inn connection) lug (For p ø connection

More information

Series VQZ1000/2000/3000 Single Unit

Series VQZ1000/2000/3000 Single Unit +- ase Mounted lug Lead Unit ort Solenoid Valve Series VQZ// Single Unit [Option] How to Order Valve Made to Order (For details, refer to page 7.) VQZ Series VQZ body width mm VQZ body width mm VQZ body

More information

Vacuum Equipment. Application. Series

Vacuum Equipment. Application. Series Equipment Series Application Page ejector In-line vacuum ejector Multistage ejector ejector with check valve Pad with check valve ejector for water soluble coolant removal ZH ZU ZL1/2 (Special order product)

More information

0.35 W (Without light)

0.35 W (Without light) Modular Connection Type Residual Pressure Relief 3 Port Solenoid Valve For connecting to F.R.L. units C25- C30- C40- FORMTION RoHS VP500 VP700 llows for space saving and reduced piping labor. Power consumption:

More information

D-sub Connector. Cassette base manifold SV1000/SV2000 Tie-rod base manifold SV1000/SV2000/SV3000/SV4000

D-sub Connector. Cassette base manifold SV1000/SV2000 Tie-rod base manifold SV1000/SV2000/SV3000/SV4000 D-sub Connector J Tie-rod base Cassette base pplicable series Cassette base manifold 000/000 Tie-rod base manifold 000/000//000 Number of connectors: pins MIL-C-08 Conforming to JIS-X-0 --6 For details

More information

1.8 w Port Solenoid Valve Direct Operated Poppet Type. New. Series VT307 CAT.ES11-107A. Power consumption

1.8 w Port Solenoid Valve Direct Operated Poppet Type. New. Series VT307 CAT.ES11-107A. Power consumption Port Solenoid Valve Direct Operated Poppet Type Power consumption Vacuum applications New [Option] RoHS 4 Standard wtype (Existing product: 4.8 W) 0. kpa Energy-saving type.8 w (Existing product: W) A

More information

4 Port Solenoid Valve

4 Port Solenoid Valve Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean

More information

4 Port Solenoid Valve

4 Port Solenoid Valve Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean

More information

5 Port Solenoid Valve

5 Port Solenoid Valve 0 PW COM Rubber Seal Port Solenoid Valve Series SZ000 Cassette Type Manifold The plug-in cassette system makes valve replacement easy. plug-in manifold has been created with a height of. mm (including

More information

5 Port Solenoid Valve

5 Port Solenoid Valve Metal seal Port Solenoid Valve Series VQ Rubber Seal Space-saving profile Clean space saving design with all pilot valves concentrated to one side with no protrusions in any direction Space-saving % less

More information

Base Mounted Series VQZ100/200/300. Nil. W Note) Compliant. Electrical entry. (DC speci- fication) terminal terminal. Coil voltage 24VDC

Base Mounted Series VQZ100/200/300. Nil. W Note) Compliant. Electrical entry. (DC speci- fication) terminal terminal. Coil voltage 24VDC Base Mounted Series VQZ00/00/00 VQZ00/00 / How to Order Valve Made to Order (For details, refer to page 9 and 4.) VQZ 5 5 M Series VQZ00 body width 5 mm VQZ00 body width 8 mm Type of actuation 4 N.C. N.O.

More information

ISO Standard Solenoid Valve/SIZEq Rubber Seal Series VP7 6

ISO Standard Solenoid Valve/SIZEq Rubber Seal Series VP7 6 ISO Standard Solenoid Valve/SIZq Rubber Seal Series VP7 6 VP7 6 FPG D VP7 6 FG D position position Single solenoid (FG-S) Double solenoids (FG-D) Reverse pressure (YZ-S) Reverse pressure (YZ-D) Closed

More information

5 Port Pilot Solenoid Valve Metal Seal. Configuration Voltage Electrical entry Option. Standard. 100V AC50/60Hz 200V AC50/60Hz 24V DC.

5 Port Pilot Solenoid Valve Metal Seal. Configuration Voltage Electrical entry Option. Standard. 100V AC50/60Hz 200V AC50/60Hz 24V DC. 5 Port Pilot Solenoid Valve Metal Seal SeriesVFS Models and Variations Body ported Base mounted Series VFS000 VFS2000 VFS3000 VFS2000 VFS3000 VFS4000 VFS5000 Port Size Effective area (mm 2 ) (Nl/min) 8:

More information

Series SY3000/5000 How to Order Manifold

Series SY3000/5000 How to Order Manifold Type N ort Solenoid Valve ase Mounted Manifold Stacking Type/DIN Rail Mounted/Connector ox SY/ How to Order Manifold SSY SY SY Specifications Symbol Specifications With connector box (COM spec.) N With

More information

Series SY3000/5000 Base Mounted Manifold Stacking Type/DIN Rail Mounted Connector Box 24V. D side D. Blanking plate assembly SX A

Series SY3000/5000 Base Mounted Manifold Stacking Type/DIN Rail Mounted Connector Box 24V. D side D. Blanking plate assembly SX A Type N SY/ ase ounted anifold Stacking Type/DIN Rail ounted Connector ox How to Order anifold SSY SY SY Specifications Symbol Specifications With connector box (CO spec.) N With connector box ( CO spec.)

More information

5 Port Solenoid Valve

5 Port Solenoid Valve ort Solenoid Valve 7-6/7-8 Series Metal Seal Rubber Seal ISO Standard Size /Size 7-8/Single unit. Conforms to ISO standard /I Interface conforms to ISO standard Size (7-6) and Size (7-8). Outstanding high

More information

Option. Nil. 02 to 24 B Note 2) K Note 3) N. Note 1) Cable/SI unit specifications

Option. Nil. 02 to 24 B Note 2) K Note 3) N. Note 1) Cable/SI unit specifications Series -SQ00 Port Solenoid Valve Plug-in Unit [Option] How to Order Manifold Electrical entry F kit D-sub connector kit P kit SSQ 08 FD Kit type Flat ribbon cable connector kit J kit Flat ribbon cable

More information

5 Port Solenoid Valve

5 Port Solenoid Valve ort Solenoid Valve Metal Seal / Rubber Seal ower consumption:..w/..w ower consumption:. W/. W Compact, High Flow (Standard) (High pressure type, High speed response type) ody ported ase mounted Series

More information

Cable Appendix. Valves. Cable Appendix. Page 16. Multi-way cables. D-sub Connector Cables. AXT100-DS Conforming to MIL-C-24308

Cable Appendix. Valves. Cable Appendix. Page 16. Multi-way cables. D-sub Connector Cables. AXT100-DS Conforming to MIL-C-24308 Cable ppendix Cable ppendix Multi-way cables The multi-pole connector cables used on SMC valves are common across several ranges. Cables are available in accordance with the MIL standard C-08 and also

More information

Manifold Specifications

Manifold Specifications Specifications Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be

More information

Indicate VO for manifold. Port size. Nil 1/8 02 1/4. Specifications. Option Description Bracket (With screw) Part no. DXT060-27A

Indicate VO for manifold. Port size. Nil 1/8 02 1/4. Specifications. Option Description Bracket (With screw) Part no. DXT060-27A 1 3 Port Air Operated Valve Series VTA301 JIS Symbol VTA 301 Indicate VO for manifold. Port size Specifications How to Order Without connection port (For manifold) 01 1/8 02 1/4 Option Fluid Air Operating

More information

3 Port Solenoid Valve

3 Port Solenoid Valve Rubber Seal Port Solenoid Valve Series Manifold Single Unit ase Mounted Manifold VV01 V100 ar base P.18 ody Ported P.10 ase Mounted P.10 VQD VKF VK VT VS Separable base ody Ported Manifold P.1 Stacking

More information