3 Port Solenoid Valve

Transcription

1 3 ort Solenoid Valve Series VKF300 ubber Seal Direct Operated oppet Type Compact yet provides a large flow capacity Body width 8 mm vailable in vacuum applications ( 0. ka) Can be used in vacuum/release circuits Universal porting N.C./N.O. type can be switched by supplying air to port () or 3 (). way valves and selector valves can also be freely used. () 3() Easy manual operation [Option] Various manifold piping directions Output port: Manifold set-up allowing 360 rotation of () entry direction (in 90 increments) Type S4 Type 0 and Type 40 Type 4 Since manual overrides are located in directions, on the top and on the side of the valve, manual override operation is possible and is unaffected by mounting space and piping direction, etc. VV06 VV00 V00 S070 VQD VQD-V VKF VK VT VS4 VS3 Ozone resistant (Series 80-) FKM (Fluororubber) is used for the fluid-contact rubber materials, allowing for use even in ozone environments. ø9 ø5 969

2 3 ort Solenoid Valve Direct Operated oppet Type Series VKF300 [Option] How to Order Valves (Single type) VKF33 ated voltage VC, 60 Hz VC, 60 Hz 50 0 VC, 60 Hz 50 0 VC, 60 Hz 4 VDC VDC VC, 60 Hz Semi-Standard For other rated voltages, please consult with SMC. Electrical entry G: Grommet H: Grommet (Lead wire length: (Lead wire length: 300 mm) 600 mm) efer to page 978 for Connector part no. 5 G M5 ort size M5 0 D: DIN terminal DO: DIN terminal (Without connector) M5 x 0.8 c /8 ( port) Thread type F N T C G NT NTF For the port size 0 only. (With bracket) (For manifold) VKF333 5 G M5 VKF33 3 VKF33 3Y VKF33 3E VKF33 3V VKF33 3W VKF334 VKF334Y VKF334E VKF334V VKF334W VKF334 Valve option Flow Characteristics/Weight Body ported Base mounted (With subplate) Valve model Operating pressure range (Ma) 0 to Ka to 0. 0 to ka to 0. ort size M5 x 0.8 c /8 Note ) VKF33 : dd 0 g to each when equipped with bracket. 970 Standard type V For vacuum Y For low power consumption W For vacuum/low power consumption E Continuous duty type pplicable voltage: and 4 VDC 5 G 0 S Z ort size 0 Q c /8 (With sub-plate) Without sub-plate Light/Surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor (Type D only) Since the indicator light is built in the connector, thus, DOZ is not available. Flow characteristics ( ) 3 ( ) C [dm 3 /(s bar)] b Cv C [dm 3 /(s bar)] b Cv Weight (g) DIN Grommet terminal 80 () 0 90 () 30

3 3 ort Solenoid Valve Direct Operated oppet Type Series VKF300 Standard Specifications Symbol () Valve specifications Electricity specifications Type of actuation Fluid mbient and fluid temperature esponse time (at 0.5 Ma) () Lubrication Mounting orientation Impact/Vibration resistance () Enclosure Electrical entry C ated voltage DC llowable voltage fluctuation pparent power (C) ower consumption (DC) Surge voltage suppressor Inrush Holding W/o indicator light W/ indicator light C DC C DC Direct operated type position single solenoid ir Max. 50 C 0 ms or less (Standard), 5 ms or less (Low power consumption type) Non-locking push type Not required (Use turbine oil Class ISO VG3, If lubricated.) Unrestricted 300/50 m/s Dustproof Grommet (G), DIN terminal (D) 00, 0, 00, 0, 40 V 6,, 4, 48 V ±0% of rated voltage 9.5 V/50 Hz, 8 V/60 Hz 7 V/50 Hz, 5 V/60 Hz 4 W (Standard), W (Low power consumption type) 4.3 W (Standard),.3 W (Low power consumption type) Diode ( for VDC or less) Neon bulb LED Note ) Based on dynamic performance test, JIS B (Coil temperature: 0 C, at rated voltage, without surge voltage suppressor) When equipped with DC solenoid/surge voltage suppressor, a delay of about 0 to 30 msec. occurs in the OFF response time. Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) VV06 VV00 V00 S070 VQD VQD-V VKF VK VT VS4 VS3 Construction 3 () () q t o r e y u i () () 3() w Component arts No. q w e r t y u i o Description Solenoid coil assembly Sub-plate Body Spool/Sleeve eturn spring Bracket assembly Gasket assembly (With mounting screw) Bushing assembly Material luminum die-casted luminum die-casted luminum esin Stainless steel Steel esin Note For VKF334: VKF300-S-0 For VKF33: VKF For VKF333: VKF300-- For VKF334: VKF For VKF33 4: VKF sets per unit required 97

4 Series VKF300 Dimensions: Single Type Grommet: VKF33 - G- M5 0 DIN terminal: VKF33 - D- M5 0 7 c /8, M5 x 0.8 () port Max..0 pplicable cable O.D. ø4 to ø6.5 g mm 5 x ø x M5 x 0.8 (), 3() port efer to grommet type for other dimensions. Grommet: VKF334 - G-0 DIN terminal: VKF334 - D Max. 0 pplicable cable O.D. ø4 to ø6.5 g mm x ø x c /8 (), (), 3() port 3.5 efer to grommet type for other dimensions. 97

5 3 ort Solenoid Valve Direct Operated oppet Type Series VKF300 How to Order Manifold [Option] Common SU/Common EXH Type 0: How to Order ( port top ported) () port: c /8, M5 x 0.8 Common SU/Individual EXH Type : ( port top ported) () port: c /8, M5 x 0.8 3() port: c /8 VV3KF3 0 How to Order Common SU/Common EXH Type 40: How to Order ( port bottom ported) Type 4: ( port side ported) () port: c /8 3() port: c /8 05 VV3KF3 05 () port: c /8 () port: c /8 3() port: c /8 () port: c /8 VV3KF How to Order Valve stations 0 station Valve stations 0 station 0 0 stations Valve stations 0 station stations Option With bracket F (Not mounted) 0 stations F N T 00F 00N 00T ort size 0 c /8 Thread type F c G NT NTF 00F 00N 00T Thread type c G NT NTF Option With bracket (Not mounted) VV3KF Thread type c G NT NTF pplicable solenoid valve VKF M5 (-Q) VKF (-Q) pplicable blanking plate assembly VK Bracket VK Q pplicable solenoid valve VKF M5 (-Q) VKF (-Q) pplicable blanking plate assembly VK Q pplicable solenoid valve VKF334 - (-Q) pplicable blanking plate assembly VK Bracket VK Q pplicable solenoid valve VKF334 - (-Q) pplicable blanking plate assembly VK VV06 VV00 V00 S070 VQD VQD-V VKF VK VT VS4 VS3 () port: c /8 () port: c /8 3() port: c /8 Type S4 (Solenoid on same side as port ) () port: c /8 () port: c /8 3() port: c /8 Solenoid direction Solenoid on opposite port Solenoid on same S side as port Valve stations 0 station 0 0 stations Thread type F N T ort size 0 c /8 C4 ø4 cassette C6 ø6 cassette c G NT NTF Q 973

6 Series VKF300 Dimensions: Manifold Type 0 Manifold Common SU, Common EXH/Top orted Grommet: G 4 x c /8 (), 3() port DIN terminal: D pplicable cable O.D. ø4 to ø n x c /8, M5 x 0.8 () port 4 x M3 x 0.5 depth 6 (Bracket mounting screw) x ø4.5 = L 4 x ø4.5 (Bracket mounting hole) Max. 0 g.7 mm (Type DZ only) x c /8 (), 3() port L3 7 4 L Dimension n: Stations n L L L Type Manifold Common SU, Individual EXH/Top orted = L 5.5 n x c /8, M5 x 0.8 () port n x c /8 3() port x ø Grommet: G x c /8 () port 9 35 g.7 DIN terminal: D Max. 0 mm pplicable cable O.D. ø4 to ø (Type DZ only) 47.5 x c /8 () port 9 35 = L Dimension L L n 974 n: Stations

7 3 ort Solenoid Valve Direct Operated oppet Type Series VKF300 Type 40 Manifold Common SU, Common EXH/Bottom orted L = x M3 x 0.5, depth 6 (Bracket mounting screw) 5 4 x ø4.5 (Bracket mounting hole) L3 7 5 x ø Grommet: G g.7 mm = x c /8 (), 3() port Max. 0 DIN terminal: D pplicable cable O.D. ø4 to ø (Type DZ only) 4 x c /8 (), 3() port VV06 VV00 V00 S070 VQD VQD-V VKF VK VT VS4 VS3 n x c /8 () port L Dimension L L L3 n n: Stations

8 Series VKF300 Dimensions: Manifold Type 4 Manifold Common SU, Common EXH/Side orted Grommet: G DIN terminal: D 4 x c /8 (), 3() port pplicable cable O.D. ø4 to ø n x c /8 () port L = 9 x ø4.5 (Mounting holes) = Max. 0 g.7 mm (Type DZ only) 4 x c /8 (), 3() port = Type S4 Manifold Common SU, Common EXH/Side orted: Same direction as solenoid Grommet: G L 5 = 9 4 x ø x c /8 (), 3() port g.7 DIN terminal: D MX.0 mm (Type DZ only) x c /8 (), 3() port n x c /8 () port pplicable cable O.D. ø4 to ø = 9 0 L Dimension n L L 976 n: Stations

9 Series VKF300 Specific roduct recautions Be sure to read before handling. efer to front matter 53 for Safety Instructions and pages 3 to 8 for 3/4/5 ort Solenoid Valve recautions. ø9 Manual Override Operation Warning Connected actuator is started by manual operation. Use the manual override after confirming that there is no danger. Non-locking push type (Tool required) ø5 There are manual overrides in directions, on the top and on the side (solenoid side). By pressing either of the manual overrides in the direction of the arrow () until it stops (approx. mm), it will turn ON, and it turns OFF when released. Caution Mounting of Valves fter confirming the gasket is correctly placed under the valve, securely tighten the bolts with the proper torque shown in the table below. roper tightening torque (N m) 0.6 to 0.8 Mounting screw Bushing C VDC or less 4 VDC or more Grommet type Light/Surge Voltage Suppressor Caution Without indicator light With indicator light Without indicator light With indicator light Without indicator light With indicator light Grommet type (G) (+) ed Black ( ) DIN terminal type (D) recautions on connection of 4 V or more DC For the grommet type, connect the positive (+) side to the red lead wire and connect the negative ( ) side to the black lead wire. For the DIN terminal, connect the positive (+) side to the connector s no. terminal and connect the negative ( ) side to the no. terminal. (See the markings on the terminal block.) For V or less DC, positive (+) and negative ( ) can be connected in either direction. ed (+) Black ( ) Diode Surge voltage suppressor No. Neon bulb No. No. LED No. (+) No. ( ) (+) LED No. ( ) DIN terminal type Marking Diode Diode Symbol S Z S Z S Z (Built in the connector) VV06 VV00 V00 S070 VQD VQD-V VKF VK VT VS4 VS3 The bushing may be damaged if the tightening torque of 0.8 N m is exceeded. In the event that damage does occur, be sure to replace the bushing. SU Block bushing assembly no. VKF sets per unit are required. Marking For C and VDC or less 4 VDC or more ( ) (+) Symbol Surge voltage suppressor (Built in the terminal block) For 4 V or more DC () (Diode) 977

10 Series VKF300 Specific roduct recautions Be sure to read before handling. efer to front matter 53 for Safety Instructions and pages 3 to 8 for 3/4/5 ort Solenoid Valve recautions. Warning How to Wire DIN Terminal Connection. Loosen the set screw and pull out the connector from the terminal block of the solenoid.. fter removing the holding screw, insert a flat head screwdriver, etc. into the notch on the bottom of the terminal block and pry it up, separating the terminal block and the housing. 3. Loosen the terminal screws (slotted screws) on the terminal block, insert the core of the lead wire into the terminal in accordance with the prescribed connection method, and attach securely with the terminal screws. 4. Tighten the ground nut to secure the wire. Change of electrical entry (Orientation) fter separating terminal block and housing, the cord entry direction can be changed by attaching the housing in the desired direction (4 directions in 90 increments). In the case of indicator light, avoid damaging the light with lead wire. recautions The connector should be inserted and pulled out in a straight line without tilting diagonally. pplicable cable O.D.: ø4 to ø6.5 (eference) 0.5 mm core and 3 core wires equivalent to JIS C 3306 Circuit with indicator light C Circuit diagram NL NL: Neon bulb : esistor VDC or less Circuit diagram LED LED: Light emitting diode : esistor How to Calculate the Flow ate 4 VDC or more Circuit diagram D LED + D: rotective diode LED: Light emitting diode : esistor For obtaining the flow rate, refer to front matters 4 to 45. Ground nut Holding screw Housing Grommet (ubber) Washer (Voltage symbol) efer to the table below. Terminal screw (3 locations) (osition for light mounting) Terminal block Shaved part Connector part no. VK art no. for connector with indicator light ated voltage 00 VC 00 VC 4 VC 6 VDC VDC 4 VDC 48 VDC Voltage symbol 3 LW06 LW LD4 LD8 art no. VK VK VK VK VK VK VK