Q1 Q2 Q3. 2 stage performance. 3 stage performance. Suction flow rate. 250% suction flow rate increase. Release flow rate adjusting needle.
|
|
- Paulina Goodman
- 6 years ago
- Views:
Transcription
1 Multistage Ejector 112/212 Series Energy-saving, large flow rate, 3 stage diffuser construction Suction flow rate increased 25% and air consumption reduced 2% with 3 stage diffuser construction (ersus ø1.3, one stage model) acuum pressure sensor With adaptor for vacuum acuum pressure 1 stage performance 212 Series Q1 Q2 Q3 Q1 Q2 Q3 2 stage performance 25% suction flow rate increase 3 stage performance Suction flow rate iffusers stacked and integrated Compact size and large flow rate (Twice the flow rate of the 112) With vacuum pressure gauge Release valve Supply valve Release flow rate adjusting needle Suction flow rate (L /min (NR)) With One-touch fittings Makes piping work easy (112 only) ir consumption (L /min (NR)) Built-in silencer Z Q- igital vacuum pressure switch Rated pressure range:. to 11. ka 3-step setting S ort exhaust ZSE3 ush djust to set-value with buttons. ush Finish setting ower-saving function ower consumption is reduced by turning off the monitor. (Reduce power consumption by up to 2%.) For ZSE3 series, refer to the Best neumatics No. 8 for details. Series ariations Series Maximum suction flow rate (L /min (NR)) ir consumption (L /min (NR)) Built-in silencer ort exhaust With digital vacuum pressure switch With supply and release valves With supply valve ZSE3 acuum pressure sensor option acuum pressure gauge acuum adapter
2 Multistage Ejector 112 Series How to Order Without valve K1 5 M Z Rated voltage C specifications S 5 R 3 C specifications (5/6 Hz) [115] 22[23] Nozzle diameter Exhaust type Built-in silencer ort exhaust (EXH) thread type (ort exhaust only) Note 3) The thread ridge shape is conforming to G thread standard (JIS B 22), but other shapes are not conforming to ISO163 and ISO1179. Supply valve/release valve combination G H L LN LO M MN MO F N T Grommet L plug connector M plug connector Rc1/2 G1/2 (3) 1/2-14 NT 1/2-14 NTF K1 K2 S Z U With supply and release valves With supply valve Electrical entry Lead wire length.3 m Lead wire length.6 m Lead wire length.3 m Without lead wires Without connector Lead wire length.3 m Without lead wires Without connector Light/Surge voltage suppressor Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With light/surge voltage suppressor (Non-polar type) Type U is 24 or 12 C only. Since surge voltage is prevented by a rectifier in the case of C, there is no type S. Manual override Non-locking push type Locking slotted type Lead wire specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) L Lead wire with connector (Length 2 m) This is not available for models without lead wires. Unit specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) GN G M With unit switching function SI unit only With unit switching function (Initial value psi) Note 1) W/ unit switching function is not permitted to sell for the domestic use in Japan, because the new Weight and Measure ct has been implemented since October, 99. Note 2) Fixed unit: ka Output specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) N B C E F NN open collector 1 output N open collector 1 output NN open collector 2 outputs N open collector 2 outputs NN open collector 1 output + nalog voltage output NN open collector 1 output + nalog current output N open collector 1 output + nalog voltage output N open collector 1 output + nalog current output acuum pressure sensor None acuum port adaptor Rc 1/8 acuum pressure gauge igital pressure switch for vacuum 28
3 Multistage Ejector 112 Series Standard With vacuum pressure gauge acuum port adapter Ejector Specifications Model Nozzle diameter Maximum suction flow rate ir consumption Maximum vacuum pressure Maximum operating pressure Supply pressure range Standard supply pressure Operating temperature range Supply/Release alve Specifications mm 1 L/min (NR) 63 L/min (NR) 84 ka.7 Ma.2 to.5 Ma.4 Ma 5 to 5 C art no. SYJ514- Type of valve actuation N.C. Fluid ir Operating pressure range Internal pilot type.15 to.7 Mpa mbient and fluid temperature 1 C to 5 C (No freezing) Response time (For.5 Ma) (1) 25 ms or less Maximum operating frequency 5 Hz Manual override Non-locking push type/locking slotted type ilot exhaust type ilot valve individual exhaust, Main valve/ilot valve common exhaust Lubrication Not required Mounting position Unrestricted Impact/ibration resistance (2) 15/3 m/s 2 Enclosure ust proof Note 1) Based on JIS B dynamic performance test. (coil temperature 2 C, at rated voltage, without surge voltage suppressor) Note 2) Impact resistance: No malfunction when tested with a drop tester in the axial direction and at a right angle to the main valve and armature, one time each in both energized and deenergized states. (initial value) ibration resistance: No malfunction when tested with one sweep of 45 to 2 Hz in the axial direction and at a right angle to the main valve and armature, one time each in both energized and deenergized states. (initial value) Note 3) Refer to Best neumatics No. 1-2 for details on valves. acuum ressure Gauge Specifications Z Q- ort exhaust art no. Fluid ressure range Scale range (ngular) ccuracy Class Operating temperature range Material GZ3S ir 1 to 1 ka 23 ±3% F.S. (Full span) Class 3 to 5 C Housing: olycarbonate/bs resin Weight 112 (Basic) ort exhaust igital pressure switch for vacuum (Excluding lead wire) igital pressure switch for vacuum (Including 3 cores lead wire) igital pressure switch for vacuum (Including 4 cores lead wire) alve (per 1 pc.) 45 g +11 g +43 g +81 g +85 g +45 g 29
4 112 Series acuum ressure Switch Unit/igital ressure Switch for acuum: ZSE3-- - Specifications acuum ressure Switch Replacement It is impossible to replace only the vacuum pressure switch. lease replace the suction cover assembly. For ordering information, refer to How to Order. The vacuum pressure switch mounted on this product is equivalent to our SMC product, the ZSE3 series compact digital pressure switch. For details about vacuum pressure switch functions, refer to the ZSE3 series in the Best neumatics No. 8. ressure switch correspondence table igital pressure switch ZSE3 series ZSE3 Multistage ejector series 12 Multistage ejector suction cover assembly 12 SC Output specifications Unit specifications Lead wire specifications 21 Rated pressure range Set pressure range Withstand pressure Minimum unit setting pplicable fluid ower supply voltage Current consumption Switch output Maximum load current Maximum applied voltage Residual voltage Response time Short circuit protection Repeatability Hysteresis nalog output isplay isplay accuracy Indicator light Environment resistance How to Order Suction Cover ssembly 1 2 Hysteresis mode Window comparator mode Note 1) oltage output Note 2) Current output Output voltage (Rated pressure range) Linearity Output impedance Output current (Rated pressure range) Linearity Load impedance Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance Ejector size N B C E F GN G 12. to 11. ka 1. to 15. ka 5 ka.1 ka ir 12 to 24 C ±1% (with power supply polarity protection) 4 m (at no load) NN or N open collector 1 output NN or N open collector 2 outputs (selectable) 8 m 28 (at NN output) 1 or less (with load current of 8 m) 2.5 ms or less (with anti-chattering function: 2, 1, 5, 1, 2 ms) Yes ±.2% F.S. ±1 digit ariable ( to variable) SC acuum pressure sensor None acuum port adaptor Rc1/8 acuum pressure gauge igital pressure switch for vacuum Output specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) NN open collector 1 output N open collector 1 output NN open collector 2 outputs N open collector 2 outputs NN open collector 1 output+nalog voltage output NN open collector 1 output+nalog current output N open collector 1 output+nalog voltage output N open collector 1 output+nalog current output 1 to 5 ±2.5% F.S. ±1% F.S. or less pprox. 1 kω 4 to 2 m ±2.5% F.S. ±1% F.S. or less Maximum load impedance: ower supply voltage 12 : 3 Ω, ower supply voltage 24 : 6 Ω Minimum load impedance: 5 Ω 4-digit, 7-segment, 2-color LC (Red/Green) Sampling cycle: 5 times/sec. ±2% F.S. ±1 digit (mbient temperature of 25 C) Lights up when switch output is turned ON. (OUT1: Green, OUT2: Red) I4 Operating: to 5 C, Stored: 1 to 6 C (No freezing or condensation) Operating/Stored: 35 to 85% RH (No condensation) 1 C for 1 minute between terminals and housing 5 MΩ or more (5 C measured via megohmmeter) between terminals and housing ±2% F.S. (Based on 25 C) Temperature characteristics Oilproof heavy-duty vinyl cable, 3 cores ø3.5, 2 m Lead wire 4 cores Conductor area:.15 mm 2 (WG26) Insulator O..: 1. mm Standards CE Marking, UL/CS, RoHS compliance Note 1) When analog voltage output is selected, analog current output cannot be used together. Note 2) When analog current output is selected, analog voltage output cannot be used together. Note 3) If the applied pressure fluctuates around the set value, the hysteresis must be set to a value more than the fluctuating width, otherwise, chattering will occur. Lead wire specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) None Lead wire with connector Unit specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) M L With unit display switching function Fixed SI unit With unit display switching function Note 1) W/ unit switching function is not permitted to sell for the domestic use in Japan, because the new Weight and Measure ct has been implemented since October, 99. Note 2) Fixed unit: ka
5 Multistage Ejector 112 Series Exhaust Characteristics/Flow Rate Characteristics/Time to Reach acuum (Representative value) 112 Exhaust Characteristics acuum pressure (ka) Time to Reach acuum acuum pressure in tank (ka) Suction flow rate ir consumption Supply pressure (Ma) acuum pressure Time to reach vacuum (S) Suction flow rate (L/min (NR)) ir consumption (L/min (NR)) Tank capacity: 1L Supply pressure:.4 Ma acuum pressure reached 89ka 8ka 66ka 53ka 4ka 26ka 13ka <How to Read the Graph> The graphics indicate the time required to reach a vacuum pressure determined by adsorption conditions for workpieces, etc., starting from atmospheric pressure in a 1L sealed tank. pproximately 8.8 seconds are necessary to attain a vacuum pressure of 89 ka. Flow Rate Characteristics acuum pressure (ka) acuum pressure Suction flow rate (L/min(NR)) Supply pressure:.4 Ma <How to Read the Graph> The flow rate characteristics indicate the relationship between the vacuum pressure and the suction flow rate of the ejector, and show that when the suction flow rate changes the vacuum pressure also changes. In general, this indicates the relationship at the ejector s standard operating pressure. In the graph, max indicates the maximum vacuum pressure, and Qmax indicates the maximum suction flow rate. These are the values that are published as specifications in catalogs, etc. Changes in vacuum pressure are explained below. max Q1 Qmax Suction flow rate If the ejector s suction port is closed and sealed tight, the suction flow rate becomes and the vacuum pressure increases to the maximum (max). 2. If the suction port is opened and air is allowed to flow (the air leaks), the suction flow rate increases and the vacuum pressure decreases. (the condition of 1 and Q1) 3. If the suction por t is opened completely, the suction flow rate increases to the maximum (Qmax), while the vacuum pressure then drops almost to (atmospheric pressure). When adsorbing work pieces which are permeable or subject to leakage, etc., caution is required as the vacuum pressure will not be very high. Z Q- 211
6 112 Series Construction Without valve!1 q t o i w e! y r u!7!4!6!5!3!2 Comonent arts No Replacement arts escription art no. Note No. escription Material art no. Suction cover 9 Sound absorbing material B F 112-S1 Front cover Without valve 1 Sound absorbing material F (Set no. for 9, 1 & 11) End cover 11 Suction filter E Body acuum sensor unit Nozzle iffuser etent plug Other than vacuum switch Table1. How to order connector assembly For C SY Lead wire cover acuum switch specifications Front cover B For 1 C SY alve plate Needle For other C Supply valve (N.C.) SYJ514- SY Release valve (N.C.) SYJ514- Connector assembly SYJ (Table1.) Lead wire length mm(Standard) 6mm 1mm 15mm 2mm 25mm 3mm 5 5mm 212
7 S Multistage Ejector 112 Series imensions: 112 Series (Without alve) Label Standard ort exhaust acuum pressure gauge 4.5 Exhaust(EXH.) port Rc 1/2 (1/2-14 NTF, G 1/2 1/2-14 NT) Z With vacuum pressure gauge 112-G acuum adapter Rc 1/8 7 With vacuum adapter 112-GN igital pressure switch for vacuum 61 With digital pressure switch for vacuum Q ir pressure supply () port pplicable tubing O.. 6 acuum () port pplicable tubing O.. 12 Section (19) Label Section / With igital ressure Switch for acuum 112- (ZSE3) 28 3 (5.8) 4 x M4 x.7 Thread depth 8 () Circuit diagram Silencer ort exhaust Withe gauge With adapter ZSE3 (Without analog output) ZSE3 (With analog output) 213
8 imensions: 112 Series (With alve) 13.5 igital vacuum pressure switch X X ZSE3 (Without analog output) ZSE3 (With analog output) Release valve 1 Circuit diagram Supply valve Manual Release flow adjusting needle ir pressure supply port () pplicable tubing O.. 6 acuum port () pplicable tubing O (19) (61.8) Name plate 28 S S 112 Series With supply valve and release valve 112-K1 L - (3) 45.8 (5.8) x M4 x.7 Thread depth 8 (For mounting) With supply valve 112-K2 L - ZSE3 (Without analog output) ZSE3 (With analog output) Blanking plate assembly (SYJ5-1-3) igital pressure switch for vacuum Circuit diagram Supply valve 214
9 Multistage Ejector 212 Series Standard With vacuum pressure gauge With digital vacuum pressure switch With adaptor GN G 2 Nozzle diameter Exhaust specifications Built-in silencer ort exhaust acuum pressure sensor None acuum port adaptor Rc 1/8 acuum pressure gauge igital pressure switch for vacuum Made to Order (Refer to page 218 for details.) Symbol Specifications/Contents X132 Supply valve/acuum release valve Ejector Specifications How to Order Lead wire specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) L Lead wire with connector (Length 2 m) This is not available for models without lead wires. Unit specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) M With unit switching function SI unit only With unit switching function (Initial value psi) Note 1) W/ unit switching function is not permitted to sell for the domestic use in Japan, because the new Weight and Measure ct has been implemented since October, 99. Note 2) Fixed unit: ka Output specifications (pplicable only when the vacuum pressure sensor specification is for digital pressure switch for vacuum) N B C E F NN open collector 1 output N open collector 1 output NN open collector 2 outputs N open collector 2 outputs NN open collector 1 output + nalog voltage output NN open collector 1 output + nalog current output N open collector 1 output + nalog voltage output N open collector 1 output + nalog current output Z Q- ort exhaust Model Nozzle diameter Maximum suction flow rate ir consumption Maximum vacuum pressure Maximum operating pressure Supply pressure range Standard supply pressure Operating temperature range 212 ø1.2 mm x 2 2 L/min (NR) 126 L/min (NR) 84 ka.7 Ma.2 to.5 Ma.4 Ma 5 to 5 C Weight 212 ort exhaust igital pressure switch for vacuum (Excluding lead wire) igital pressure switch for vacuum (Including 3 cores lead wire) igital pressure switch for vacuum (Including 4 cores lead wire) alve (per 1 pc.) 7 g +3 g +43 g +81 g +85 g +45 g 215
10 212 Series Exhaust Characteristics/Flow Rate Characteristics/Time to Reach acuum (Representative value) 212 Exhaust Characteristics acuum pressure (ka) acuum pressure Suction flow rate ir consumption Supply pressure (Ma) Suction flow rate (L/min (NR)) ir consumption (L/min (NR)) Flow Rate Characteristics acuum pressure (ka) Suction flow rate (L/min(NR)) Supply pressure:.4 Ma Time to Reach acuum acuum pressure in tank (ka) Time to reach vacuum (S) Tank capacity: 1L Supply pressure:.4 Ma acuum pressure reached 89ka 8ka 66ka 53ka 4ka 26ka 13ka <How to Read the Graph> The graphics indicate the time required to reach a vacuum pressure determined by adsorption conditions for workpieces, etc., starting from atmospheric pressure in a 1L sealed tank. pproximately 8.8 seconds are necessary to attain a vacuum pressure of 89 ka. <How to Read the Graph> The flow rate characteristics indicate the relationship between the vacuum pressure and the suction flow rate of the ejector, and show that when the suction flow rate changes the vacuum pressure also changes. In general, this indicates the relationship at the ejector s standard operating pressure. In the graph, max indicates the maximum vacuum pressure, and Qmax indicates the maximum suction flow rate. These are the values that are published as specifications in catalogs, etc. Changes in vacuum pressure are explained below. max acuum pressure 1 Q1 Qmax Suction flow rate 1. If the ejector s suction port is closed and sealed tight, the suction flow rate becomes and the vacuum pressure increases to the maximum (max). 2. If the suction port is opened and air is allowed to flow (the air leaks), the suction flow rate increases and the vacuum pressure decreases. (the condition of 1 and Q1) 3. If the suction por t is opened completely, the suction flow rate increases to the maximum (Qmax), while the vacuum pressure then drops almost to (atmospheric pressure). When adsorbing work pieces which are permeable or subject to leakage, etc., caution is required as the vacuum pressure will not be very high. Construction q t i w! o Component arts No. escription 1 Suction cover 2 Front cover 3 End plate 4 Body 5 acuum sensor unit 6 Nozzle 7 iffuser etent plug 8 Lead wire cover 216 y r Note Other than vacuum switch acuum switch specifications u e Replacement arts No. 9 1 escription Sound absorbing material Sound absorbing material Material sponge sponge art no. 212-S1 (Set no. for 9 & 1)
11 S Multistage Ejector 212 Series imensions: 212 Series ir pressure supply () port Rc 1/8 acuum() port Rc 3/4 76 Standard 212 ort exhaust acuum pressure gauge Label 61 Exhaust (EXH.) port Rc1 25 Z With vacuum pressure gauge 212-G acuum adapter Rc 1/8 7 With vacuum adapter 212-GN With digital pressure switch for vacuum 212- igital pressure switch for vacuum Q- Section (19) 2 x ø (4) Circuit diagram Silencer 27 ort exhaust x M5 x.8 Thread depth 6 () Section / With igital ressure Switch for acuum (5.8) Withe gauge With adapter ZSE3 (Without analog output) ZSE3 (With analog output) 217
12 Series Made to Order Specifications lease contact SMC for detailed specifications, dimensions and lead times. 1 With Supply and Release alves 212 alve oltage Electrical entry acuum pressure switch Electrical entry X132 With supply and release valves 212 type with supply and release valves imensions Release valve: SYJ714- ir pressure supply () port Rc1/8 acuum () port Rc3/4 1 Supply valve: SYJ acuum break flow adjustment needle pprox. (3) Manual override 2 x ø x M5 x.8 Thread depth 6 ()
13 Series Specific roduct recautions Be sure to read this before handling the products. Refer to back page 5 for Safety Instructions and pages 49 to 51 for acuum Equipment recautions. Operation of Ejector alves Caution 1. When the air supply valve is turned ON, vacuum is generated by the flow of compressed air from the nozzle to the diffuser. When the vacuum release valve is turned ON, the vacuum is quickly released as air passes through the release flow adjustment needle and flows to the vacuum port. Caution Caution Operating Environment 1. void use exposed to direct sunlight. Solenoid alves (112 Series) 1. For specific product precuations on solenoid valves, refer to the Best neumatics No Z Q- 219
Space Saving Vacuum Ejector/Vacuum Pump System
Space Saving acuum Ejector/acuum ump System Series Current 21.6 mm mm Width mm [Option] Weight 9 g Single unit with vacuum pressure switch and suction filter ZK2 ZR Z Z ZM ZL -X267 ZU Ejector.2 ump System.118
More informationVacuum Equipment. Application. Series
Equipment Series Application Page ejector In-line vacuum ejector Multistage ejector ejector with check valve Pad with check valve ejector for water soluble coolant removal ZH ZU ZL1/2 (Special order product)
More informationCompact Vacuum Ejector
Compact acuum Ejector Series ZA Total length Total width 7.9 mm 9.9 mm Total height. mm Response time 0 ms Response time for up to 0 ka Nozzle diameter: ø0.7 iping: ø/ø. x 0 mm Able to install on the moving
More informationSpace Saving Vacuum Ejector / Vacuum Pump System
CT.US0-1'-UK Space Saving acuum jector / acuum ump System Conventional ZX 21. mm mm ZQ Series ZQ Width mm Weight 9 g Single unit with vacuum pressure switch and suction filter jector ump System NW asy-to-use
More informationSeries ZQ. Compact Vacuum Ejector. One-touch fitting. Digital vacuum pressure switch With LED display. ZX ZR ZM ZH ZU ZL ZY ZQ ZF ZP ZCU AMJ Misc.
Compact acuum Ejector Series Body width mm, Weight9 g (Single unit with vacuum pressure switch and suction filter) Conventional 21.mm mm One-touch fitting ZR ZM ZH ZU ZL ZY ZF Z ZCU AMJ Misc. Digital vacuum
More informationEnergy saving ejector
acuum Unit ZK2 Series acuum acuum ump RoHS Energy saving ejector Digital pressure switch for vacuum with energy saving function cuts supply air when the pressure reached the desired vacuum. ir consumption
More informationLarge Size Vacuum Module:
arge Size acuum Module: Ejector System/acuum ump System arge suction flow rate, suitable when used with large size pads or multiple pads. Nozzle dia. ø., ø., ø.5, ø.8, ø2. acuum module suitable for handling
More informationRubber seal 3 Port Pilot Solenoid Valve. Specifications. Fluid Operating pressure range MPa. Internal pilot
ubber seal ort ilot Solenoid Valve Series SYJ00 Specifications efer to www.smcworld.com for details of products compatible with overseas standards. Body ported Base mounted Fluid Operating pressure range
More informationLarge Size Vacuum Module:
Large Size acuum Module: System/acuum Pump System Z Large suction flow rate, suitable when used with large size pads or multiple pads. Nozzle dia. ø1.0, ø1.3, ø1.5, ø1.8, ø2.0 acuum module suitable for
More informationLarge Size Vacuum Module: Ejector System/Vacuum Pump System. Nozzle size (mm): ø1.0, ø1.3, ø1.5, ø1.8, ø2.0
Large Size acuum Module: Ejector System/acuum Pump System Nozzle size (mm): ø1.0, ø1.3, ø1.5, ø1.8, ø2.0 acuum module suitable for handling workpieces of 0.5 to 5 kg. Z MJ 13-3-1 Large Size acuum Module:
More informationEnergysaving. (10 mm) 3.09 inch (78.5 mm) Silencer (Built-in)
Compact acuum Unit Ejector/acuum Pump System Quick response Compact/ Lightweight Response time of the : 5 ms acuum response time: 28 ms (Shortened by 25%; Comparison with other SMC products) Conditions:
More informationUnit specifications. Nil. Option 1. Power supply/output connection cable. Option 2
Series -PSE3 RoHS Remote Type 2-Color Display Digital Pressure Sensor Controller How to Order 2 3 4 5 Nil Options/Part No. L Input/Output specifications NPN2 output to 5 V output NPN2 output 4 to 2 m output
More information3 Port Solenoid Valve
ubber Seal 3 ort Solenoid Valve Series SYJ300/00/700 SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M. V3 Cover
More informationVacuum Unit Vacuum Ejector Vacuum Pump System RoHS Energy saving ejector Air consumption % reduction More efficient eject
acuum Unit acuum Ejector acuum ump System New RoHS Energy saving ejector Digital pressure switch for vacuum with energy saving function cuts supply air when the pressure reached the desired vacuum. Air
More informationCompact Vacuum Unit. 46 g Single unit weight. New RoHS. 17% reduced 21% Ejector/Vacuum Pump System. 10 mm mm mm.
Compact acuum Unit Ejector/acuum Pump System New RoHS Quick response Compact/ Lightweight Response time of the : ms acuum response time: 8 ms (Shortened by %; Comparison with other SMC products) Conditions:
More informationSeries VP3145/3165/3185
Large flow capacity, small exhaust resistance (Refer to Flow Characteristic table.) Easy conversion to N.C. or N.O. N.C. N.C. X (P) N.O. N.O. X (P) Series VP 3 port Function plate makes it possible to
More informationSeries VQZ1000/2000/3000 Single Unit
+- ase Mounted lug Lead Unit ort Solenoid Valve Series VQZ// Single Unit [Option] How to Order Valve Made to Order (For details, refer to page 7.) VQZ Series VQZ body width mm VQZ body width mm VQZ body
More information2-Color Display Digital Pressure Switch
-Color Display Digital Pressure Switch (F)/(H) Series Stainless diaphragm Oil-free (Single-layer diaphragm structure) Sensor unit: Stainless steel 630 Fitting parts: Stainless steel 304 The sensor unit
More informationCompact Vacuum Unit Ejector/Vacuum Pump System. 46 g. New. 17% reduced 21% 10 mm mm mm. Series ZB. Response time of the valve: 5 ms
Compact acuum Unit Ejector/acuum Pump System New RoHS Quick response Compact/ Lightweight Response time of the : ms acuum response time: 8 ms (Shortened by %; Comparison with other SMC products) Conditions:
More information5 Port Solenoid Valve. High speed response type) Series. Body ported VQZ1 2 VQZ2 2 VQZ3 2 VQZ1 5 VQZ2 5 VQZ3 5. Base mounted
Metal Seal ort Solenoid Valve Series // Rubber Seal.. ower consumption:. W/. W Compact, High Flow Series Valve width (mm) (Standard) (High pressure type, High speed response type) ody ported ase mounted
More informationPilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry ir VQ0/30 Series Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 Series VCH VDW SX0
More information2 position single 2 position double. 3 position Ambient and fluid temperature ( C) Note 1) 3 position Max. operating
/ ort Solenoid Valve ubber Seal Series SYJ000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Specifications JIS Symbol port port (manifold) position
More informationSeries SYJ300/500/700
ort Solenoid Valve ubber Seal Series SYJ00/00/00 Low power consumption: 0.W (Without light) (Current draw: 1m at 4V DC) Completely interchangeable ilot exhaust with the previous series VJ00/00/00 and VZ00/00.
More information5 Port Solenoid Valve
ort Solenoid Valve 7-6/7-8 Series Metal Seal Rubber Seal ISO Standard Size /Size 7-8/Single unit. Conforms to ISO standard /I Interface conforms to ISO standard Size (7-6) and Size (7-8). Outstanding high
More informationNon-Contact Sensor for Workpiece Placement Verification
ir Catch Sensor Series 2 Non-Contact Sensor for Workpiece Placement Verification Stable detection of. to. mm clearance Due to the pneumatic bridge circuit and semiconductor pressure sensor, the non-contact
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type. MPa MPa (ISE75H) 2-color digital. Functions
-Color Display Digital Pressure Switch /75/75H Series NPN/PNP open collector outputs added. Zero-cut off display function added. For General Fluids For Air Rated Pressure Metal Body Type 0 5 (E75) () -Color
More information5 Port Solenoid Valve
Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size
More information10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry
Series 0-VQ00 port solenoid valve How to Order Valves 0 VQ 0 F ir cylinder Clean series Series VQ Compact port valve Type of actuation Normally closed Note) Normally open Note) Normally open type is available
More informationLarge Size Vacuum Module:
Large Size acuum Module: System/acuum Pump System Large suction flow rate, suitable when used with large size pads or multiple pads. Nozzle dia. ø1.0, ø1.3, ø1.5, ø1.8, ø2.0 acuum module suitable for handling
More informationSeries ZM Applications
Ejector [Option] ll in One! Built-in suction filter and silencer ir supply valve for generating a vacuum release valve (equipped with a flow volume adjustment valve) pressure switch (solid state, diaphragm)
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Settings can be copied to up to 1 slave sensors at once. The settings of the master sensor can be copied to the slave sensors. Reduced setting efforts
More information0.35 W (Without light)
Modular Connection Type Residual Pressure Relief 3 Port Solenoid Valve For connecting to F.R.L. units C25- C30- C40- FORMTION RoHS VP500 VP700 llows for space saving and reduced piping labor. Power consumption:
More informationSeries ZM Applications
Ejector Series ZM All in One! Built-in suction filter and silencer Air supply valve for generating a vacuum release valve (equipped with a flow volume adjustment valve) pressure switch (solid state, diaphragm)
More informationSeries ZM Applications
Ejector [Option] ll in One! Built-in suction filter and silencer ir supply valve for generating a vacuum release valve (equipped with a flow volume adjustment valve) pressure switch (solid state, diaphragm)
More informationVacuum Module. Series ZX. Ejector System/Vacuum Pump System
Vacuum Module Series ZX Ejector System/Vacuum Pump System For electronic components and precision components up to 0 g Modular design Customized application function through selection of module components.
More informationVSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter
Basic performance oriented general vacuum ejector unit Series Nozzle diameter: ø.5, ø, ø1. acuum switch and vacuum break valve, etc. are unitized, so types matching the work purpose is selectable. Features
More information3 Port Air Operated Valve. SYJA300 Series. How to Order. Nil Without sub-plate. Type of actuation. Normally closed Normally open
3 ort ir Operated Valve SYJ300 Series How to Order SYJ3 M3 Bracket Nil Without bracket F With bracket *The bracket is not mounted. *The bracket cannot be retrofitted later. SYJ3 Type of actuation Normally
More informationSpecifications. Fluid Ambient and fluid temperature ( C)
Series 0-V00 Rubber seal port direct operated solenoid valve Specifications Fluid Ambient and fluid temperature ( C) Note ) Response time (DC) ms Max. operating frequency (Hz) Manual override Lubrication
More informationVQ1000. How to Order Manifold. Kit type
- - ase Mounted VQ000/000 Manifold type D-sub connector ort Solenoid Valve Flat ribbon cable Connector Serial Directional Control Valves VQ000 How to Order, Manifold Options VQ000 How to Order, Manifold
More information3 Port Solenoid Valve
Port Solenoid Valve V00 Series Rubber Seal Power consumption 0. W (with power saving circuit) Note) Refer to page 7 for details. temperature rises: C (with power saving circuit) Sonic conductance Series
More informationRemote Type Pressure Sensors Pressure Sensor Controllers
CT.EUS1-56B-UK Remote Type Pressure Sensors Pressure Sensor Controllers Compact Pressure Sensor for Pneumatics PSE53 Multi-channel Digital Pressure Sensor Controller PSE2 Compact Pressure Sensor for Pneumatics
More informationI N D E X. VQ1000 How to Order, Manifold Options VQ2000 How to Order, Manifold Options VQ1000/2000 Model, Standard/Manifold Specifications
I N D E VQ000 How to Order, Manifold Options VQ000 How to Order, Manifold Options VQ000/000 Model, Standard/Manifold Specifications VQ000/000 F (D-sub connector) VQ000/000 (Flat ribbon cable) VQ000/000
More informationSeries 10-ZSE40A(F)/10-ISE40A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High Precision Digital Pressure Switch How to Order For positive pressure Clean series For vacuum/ compound pressure 01 N01 W1 10 Rated pressure range ISEA
More information3 Port Solenoid Valve. Copper free No copper used for sections in contact with fluids. N.C. 1(P) 2(A)
ort Solenoid Valve ubber Seal Series SY00 Low power consumption: 0.W (Standard, Without light) (Current draw: m at V DC) Large flow capacity style:0.7w (Current draw: m at V DC) Body width: 0mm 7.8 Nl/min
More information5 Port Solenoid Valve
ort Solenoid Valve Series VQ7-6/7-8 Metal Seal Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.70 VQ7-8/Manifold.70 Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and
More information3 Port Solenoid Valve
3 ort Solenoid Valve Series VKF300 ubber Seal Direct Operated oppet Type Compact yet provides a large flow capacity Body width 8 mm vailable in vacuum applications ( 0. ka) Can be used in vacuum/release
More informationSeries VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body
More information4/5 Port Solenoid Valve
ubber Seal / ort Solenoid Valve Series 000 / 000 / 000 [Option] SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread
More information3-step setting. 2-Color Display High-Precision Digital Pressure Switch. Series ZSE30A(F)/ISE30A. Added vacuum range.
2-Color Display High-Precision Digital Pressure Switch Series ZSE3A(F)/ISE3A RoHS Can copy to up to 1 switches simultaneously. The settings of the master sensor can be copied to the slave sensors. Reducing
More information4/5 Port Solenoid Valve
CT.ES8 / ort Solenoid Valve Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M.7 to M2. 앬 Flow Characteristics Series Cover (stainless
More information2-colour display. Digital Pressure Switch. Stainless diaphragm Oil-free (Single-layer diaphragm structure) IP65 compliant
-Colour Display Digital Pressure Switch Stainless diaphragm Oil-free (Single-layer diaphragm structure) Sensor parts: Stainless steel 6 Fitting parts: Stainless steel 4 The sensor and fitting parts can
More information10 switches simultaneously. The settings of the master sensor (source of copy) can be copied to the slave sensors. Reducing setting labor
2-Color Display High-Precision Digital Pressure Switch ZSE ISE RoHS ZSE ISE IP65 ZSE40 ISE40 M8 connector type ZSE10 ISE10 ISE70 ZSE80 ISE80 PS ISA3 ISA2 ISE35 Applicable Air, Non-corrosive gas, Non-flammable
More informationVacuum Ejector. Series ZM
Ejector Series All in One! Built-in suction filter and silencer Air supply valve for generating a vacuum release valve (equipped with a flow volume adjustment valve) pressure switch (solid state, diaphragm)
More informationSeries VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Type of actuation. Option.
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Body option Body
More informationFluid Internal pilot Operating pressure range (MPa) External pilot Operating pressure range (MPa) 2 position single
Valve Manifold Common Specifications Solenoid Valve Specifications Made to Order Specifications (For details, refer to page --08.) JIS Symbol position single solenoid position double solenoid position
More informationSeries VQ Port Solenoid Valve
Port Solenoid Valve Series VQ00 Outstandingly high speed, stable response, and long service life. ON:. ms, OFF: ms, Dispension accuracy ms (; supply pressure 0. MPa) 00 million cycles or more (Factors
More informationEjector Valve Unit Series ZYY/ZYX
Ejector Valve Unit Series ZYY/ZYX Series ZYY3 (Solenoid valve: SY3) Nozzle diameter: ø.7, ø1. Type S: Standard type L: Large flow type Ejectors and solenoid valves can be mounted on the same manifold.
More informationSeries VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body
More information5 Port Solenoid Valve
ort Solenoid Valve Metal Seal / Rubber Seal ower consumption:..w/..w ower consumption:. W/. W Compact, High Flow (Standard) (High pressure type, High speed response type) ody ported ase mounted Series
More informationISO Standard Solenoid Valve. Series VQ7-6/7-8. (Size 1) (Size 2) Conforms to ISO Standard 5599/I
ISO Standard Solenoid Valve Series VQ7-6/7-8 (Size ) (Size ) Conforms to ISO Standard /I.0- Ideal for driving cylinders up to Large flow capacity ø00 (VQ7-6, Size ) ø60 (VQ7-8, Size ) Nl/min VQ7-6: 668.
More informationSet value (Threshold value) Bottom value. *2 Further reduced by approx. 60% in power-saving mode (For 20 series)
3-Screen Display High-Precision Digital Pressure Switch New Added Variations! For general fluids IP65 2 outputs Analog output Setting is possible while checking Main screen the measured value. Sub screen
More information3 Port Solenoid Valve
Port Solenoid Valve Series VQ00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, C 9080-0-Main Office: (0) 88-900-Outside Local rea: (800) 8-900-www.stevenengineering.com Outstandingly
More information2-colour Display High Precision Digital Pressure Switch
High Precision, -colour Display Digital Pressure Switch -colour Display High Precision Digital Pressure Switch Series ZSE/ISE Features djustable vacuum, positive and compound pressure switch with display.
More information2-Color Display High-Precision Digital Pressure Switch Series ZSE40A(F)/ISE40A
2-Color Display High-Precision Digital Pressure Switch Series ZSEA(F)/ISEA New M8 connector type RoHS IP65 Applicable fluid Air, Non-corrosive gas, Non-flammable gas Can copy to up to 10 switches simultaneously.
More informationSeries VP3145/3165/3185
Large Size 3 Port Solenoid Valve Series VP345/365/385 Rubber Seal Large flow capacity, small exhaust resistance (Refer to Flow Characteristic table.) Easy conversion to N.C. or N.O. Function plate makes
More informationPower Consumption. 4/5 Port Solenoid Valve. Series SYJ3000/5000/7000. With Power Saving Circuit
CT.EUS8 UK ower Consumption / ort Solenoid Valve With ower Saving Circuit Series SYJ000/000/7000 Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
More information3 Port Solenoid Valve Direct Operated Poppet Type
3 Port Solenoid Valve Direct Operated Poppet Type VK300 Series Rubber Seal [Option] Universal porting Available for N.C. valve, N.O. valve, divider valve, selector valve, etc. C: 0.80 dm 3 /(s bar) (Passage
More information2-Color Display Digital Pressure Switch. NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. Rated Pressure Metal Body Type
Series ISE70/75/75H New NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red
More informationD-sub connector. Type 60F. Manifold 1 (P: SUP), 3/5 (R: EXH) Valve stations (With power terminal) D-sub connector
Series 0-SZ000 Port Solenoid Valve Cassette Type Manifold Series 0-SZ000 / Plug-in Type Model Manifold (P: SUP), / (R: EXH) Valve stations (With power terminal) pplicable connector Internal wiring (),
More informationExample. U side. Stations SY5000
45 Type 5 ort Solenoid Valve ase Mounted Manifold Stacking Type/DIN ail Mounted/Individual Wiring Series SY3000/5000 How to Order Manifold How to Order Manifold ssembly (Example) SS5Y 3 45 05 U C6 Example
More informationCoolant Valve. Series VNC. Cylinder actuation by pilot air. Wide selection of port size and variations
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) type (3 to ) Low water hammer or details, refer to page 07. Large
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type (ISE75H) 2-color digital. Functions
Series ISE70/75/75H NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red Green
More information4/5 Port Air Operated Valve. SYJA3000 Series. How to Order. (Manifold use only) Type of actuation. 2 position single. 3 position closed center
4/ ort ir Operated Valve SYJ000 Series How to Order ody ported SYJ M racket Nil Without bracket F With bracket *Refer to page 47 for the details of the brackets. ase mounted (4 port) SYJ 2 0 (Manifold
More information5 Port Direct Operated Poppet Solenoid Valve, Rubber Seal
Port Direct Operated Poppet Solenoid Valve, Rubber Seal Series 3000 or details about certified products conforming to international standards, visit us at www.smcworld.com. C: 0.4 dm 3 /(s bar) (Passage
More information1.8 w. 3 Port Solenoid Valve. VT307 Series. Direct Operated Poppet Type. Power consumption. A single valve with various valve functions
Port Solenoid Valve VT07 Series Direct Operated Poppet Type Power consumption 4 Standard wtype (Current product: 4.8 W) Energy-saving type.8 w (Current product: 2 W) Vacuum applications 0.2 kpa [Option]
More informationCoolant Valve. Air Operated/External Pilot Solenoid
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) lange type (3 to ) Low water hammer or details, refer to page
More informationHow to Order Single Unit 25A-ZK2 A 12 N 0 N N 08. e Combination of supply valve Note 3) and release valve. Note 5) K
Vacuum Unit RoHS Series 25-ZK2 How to Order Single Unit Ejector System (with Valve) Ejector System (without Valve) 25-ZK2 12 K 5 08 25-ZK2 12 0 08 q w e r t y u i Remains blank when option is not selected.
More information3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot
3 Port Solenoid Valve Pilot Operated Poppet Type Series VG342 Rubber Seal [Option] Low power consumption 4.8 W DC (Standard type) 2 W DC (Energy-saving type) No lubrication required Possible to use in
More informationMULTISTAGE MICRO EJECTORS
MULTISTAGE MICRO EJECTORS MED07-E, MED10-E Specifications Basic model Item Media Operating pressure range MPa [psi.] Proof pressure MPa [psi.] Operating temperature range (atmosphere and media) C [ F]
More information5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type 000 Series Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
More information10 mm. 7.5 mm. 40 mm. 4 Port Solenoid Valve. Series SJ2000/3000 SJ3000 SJ2000. Cassette Type Manifold. Connecter connection
Rubber Seal Port Solenoid Valve Series SJ000/000 Cassette Type Manifold 0 mm 7. mm (SJ000) 0 mm (SJ000) Non plug-in type Individual wiring manifold SJ000 SJ000 Can be mounted together. Connecter connection
More informationMULTISTAGE MICRO EJECTORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS MULTISTAGE MICRO EJECTORS CONTENTS MED07-E, MED10-E Series Specifications 715 Order Codes 716 Operation Principle
More informationVacuum Ejector. Series ZM Applications
Ejector Series ZM All in One! Built-in suction filter and silencer Air supply valve for generating a vacuum release valve (equipped with a flow volume adjustment valve) switch (solid state, diaphragm)
More information2-Color Display Digital Pressure Switch
-Color Display Digital Pressure Switch Series ZSE80(F)/ISE80(H) Stainless diaphragm Oil-free (Single-layer diaphragm structure) Sensor parts: Stainless steel 630 Fitting parts: Stainless steel 304 The
More informationPilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry Air Series VQ0/30 Compact and lightweight with large flow capacity VQ0 Mass (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 High frequency operation possible
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Series ZSE3/ISE3 2-color digital display allows you to choose the setting according to your application requirements. 4 different display settings
More informationHow to Order Single Unit 25A-ZK2 A 12 N 0 N N 08. e Combination of supply valve Note 3) and release valve. Note 5) K. Note 6)
Vacuum Unit RoHS Series 25A-ZK2 How to Order Single Unit Ejector System (with Valve) Ejector System (without Valve) 25A-ZK2 A 12 K 5 A 08 25A-ZK2 A 12 0 08 q w e r t y u i Remains blank when option is
More informationSeries VKF300 VV061 V100 S070 VQD VKF VK VT VS
Rubber Seal 3 Port Solenoid Valve Series VKF300 Direct Operated Poppet Type Compact yet provides a large flow capacity Body width 18 mm Various manifold piping directions Output port: Manifold set-up allowing
More informationSeries SV1000/2000/3000/4000
Valve/Sub-plate Type IP67 Compliant Series 000/000/000/000 How to Order C () () () () () () (E) (E) () (E) (E) () () (E) (E) () () (E) (E) () () (E) (E) Type of actuation position single position double
More information5 Port Solenoid Valve: Base Mounted Metal Seal/Rubber Seal. High speed & Long life. (Metal seal, with light and surge suppressor) 100 million cycles
ort Solenoid Valve: ase Mounted Metal Seal/Rubber Seal Series Space and capacity saving ilot valve is gathered at one side. Space saving design which does not have any protrusions. Space saving Capacity
More informationExhausting equipment for pilot valve not required. Common exhaust port for main and pilot valve (VF1000/3000)
5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000/3000/5000 Large flow capacity Yet compact size. Low power consumption 1.8 W (DC) Exhausting equipment for pilot valve not required. Common exhaust
More informationSoft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
More informationCable Appendix. Valves. Cable Appendix. Page 16. Multi-way cables. D-sub Connector Cables. AXT100-DS Conforming to MIL-C-24308
Cable ppendix Cable ppendix Multi-way cables The multi-pole connector cables used on SMC valves are common across several ranges. Cables are available in accordance with the MIL standard C-08 and also
More informationEasier maintenance. ZHP Series. Mounting with the lock plate reduces the pad replacement work steps! Uses an isolated structure. Application Examples
Vacuum ad with Ejector Series ad Diameter: ø63, ø8 Ejector and pad are integrated. Space saving and reduced piping labor! Two-stage ejector More efficient ejector Suction flow rate 1) Compared with SMC
More information3 Port Solenoid Valve Direct Operated Poppet Type. Body type. T Body ported O Manifold. Valve option
3 Port Solenoid Valve Direct Operated Poppet Type VT317 Series Rubber Seal [Option] Note) CE-compliant: Electrical entry is applicable only for the DIN terminal. Compact yet provides a large flow capacity
More information2-Color Display Digital Flow Switch
-Color Display Digital Flow Switch Series Flow rate range:, 5, 5, l/min. Minimum unit setting:. l/min. (. l/min when the flow rate range is 5, 5, l/min.) Repeatability: ±%F.S. or less Grease-free Flow
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationBody width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S.
High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure of 0.5MPa, subject to clean, dry air) 4 Port Direct
More information5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type Series 000 Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
More information