0.45 ms. 9mm. High Speed 2 Port Valve. SX10 Series. 2 mounting types

Transcription

1 Speed 2 Port Valve Series RoHS speed speed speed response response response 5 ms 9mm Width ±0.05 ms ±0.05 ms type VCH : : 5 ms * The response time is measured based on SMC test conditions. (Not guaranteed values) Long service life: 5 billion cycles or more SMC s original valve and coil structure realizes a longer product life and requires less maintenance frequency. ( type, 24 VDC, 0.25 MPa. Based on SMC life test conditions.) 2 mounting types Quick disconnect type Screw mount type frequency: 1200 Hz Good followability and response to successive electrical signal input. Continuous operation possible. type Switching frequency: 1200 Hz The manifold base should be prepared by users. Low power : 4 W Continuous energization for extended periods is possible. 505

2 Series Compact and Space-saving * The manifold base should be prepared by users. Manifold minimum mounting pitch 9.5 mm Width 9 mm Height mm (Screw mount type) Reduction in installation labor (Quick disconnect type) Can be mounted/ removed in one action and no tools required. Coil temperature rise: 5 C Filter attached type available (4 W type) Temperature rise 4 W type type 5 C 14 C Required time for attachment/detachment: pprox. 5 seconds During continuous operation at 24 VDC, 0.25 MPa, 00 Hz (per unit) Filter is mounted to port 1 (IN). Reduces installation time for multiple numbers of valves. Filter is mounted to port 1 (IN) for quick disconnect type as well. Variations/Purpose of Usage (Guide) Flow Rate/Operating Frequency (Supply pressure 0.25 MPa, 24 VDC, Duty ratio 1:1) 150 flow frequency type Medium flow Super energy-saving type 1 Ultra high frequency type Low flow 50 (L/min) (Hz) Operating frequency Driver Continuous energization 1 q Ultra high frequency type 500 to 1200 Hz w frequency type 250 to e Super energy-saving type 150 to 50 Hz For power saving driver (Refer to page 511.), ms ms Control driver is not necessary. ms ms Control driver is not necessary. Possible ms ms Please consult with SMC for continuous energization. 506 response time Specifications

3 Speed 2 Port Valve Variations ll models have the same body size. 100 Hz 500 Hz Operating frequency 1000 Hz Low flow type 1200 Hz 1000 Hz 50 Hz Medium flow type 650 Hz 00 Hz flow type Hz 600 Hz 500 Hz 250 Hz 150 Hz VCH Select a model according to applications and purposes. Model speed response required for both and Select the or type. SX1 - -B -E -F -J -K Max. operating Response time (ms) frequency 1200 Hz Hz 650 Hz Hz Hz 0.8 * Current needs to be limited. speed response required for only without use of special control circuit Select the type. Model SX1 -C -G -L Max. operating Response time (ms) frequency Hz Hz 1.5 * Please consult with SMC for continuous energization. Saving energy and continuous energization required Select the type. Model SX1 -D -H -M Max. operating Response time (ms) frequency 50 Hz Hz Hz 2.75 * Continuous energization is possible. 507

4 Speed 2 Port Valve Series RoHS Valve mounting 1 Screw mount type Note) 2 Quick disconnect type Note) Two mounting screws (M x 0.5) and a gasket are included. (packaged together) Specifications SX1 2 F Filter (IN port) Nil Without filter F With filter Note) Note) Flow reduction rate : 5% or less : 5 to 10% 1: 10 to 15% G How to Order /Operating frequency (at 24 VDC, 0.25 MPa) Symbol (L/min) (W) Max. operating frequency (Hz) B C D 4 50 E F G H J K L M Lead wire (grommet) length Symbol Length G 00 mm H 500 mm J 1000 mm (L/min) [at 0.25 MPa] (W) Type of actuation 2-position 2 port N.C., ir return Seal type Metal poppet seal Valve width (mm) 9 Fluid ir Min. operating pressure (MPa) 0.15 Coil resistance value (Ω) Max. operating pressure (MPa) [at 24 VDC] mbient and fluid temperature ( C) 10 to 50 (No freezing) Lubrication Not required Mounting orientation Unrestricted Impact/Vibration resistance (m/s 2 ) 00/50 Enclosure Dustproof Electrical entry Grommet Weight (g) Screw mount type 27 Quick disconnect type 29 Characteristics (L/min) [at 0.25 MPa] (W) C [dm /(s/bar)] b characteristics Cv Response time (ms) [at 0.25 MPa] Max. operating frequency (Hz) [at 0.25 MPa] 1,200 1, Note 1) 24 VDC, Duty ratio 1:1 : Current needs to be limited by using an energy saving driver circuit. : Current needs to be limited by using an energy saving driver circuit. : Energizing time is one second at a maximum. Please consult with SMC for continuous energization. 4 W: Continuous energization is possible. Note 2) The response time and maximum operating frequency are not guaranteed. (ctual values based on SMC test conditions) 508 Pressure/Flow Rate Characteristics (without filter) (L/min) type type type Pressure (MPa)

5 Speed 2 Port Valve Series Dimensions SX12- G Quick disconnect type 4.9 pprox. 00 (Lead wire length) ø ø Manifold base recommended dimensions Base mounting hole 9.5 or more Valve mounting pitch 2 (OUT) 1 (IN) VCH 9± ±0.1 Sectional view - (2:1) ±0.2 C or R0. ø7.1±0.05 Depth 4 or more C0.5 RZ12.5 RZ12.5 ø7.1±0.05 Depth 4 or more C0.5 5 or more or more C or R0. or more 509

6 Series Dimensions SX11- G Screw mount type 2 x ø.2 Mounting hole Manifold base recommended dimensions Base mounting hole M x 0.5 Thread depth pprox. 00 (Lead wire length) 0.9 M x 0.5 Mounting screw (Included) 9 (4) 9.5 or more Valve mounting pitch 6 46 Gasket (Included) Lead wire Operates by supplying pressure to either side. Lead wire 2 (OUT) 1 (IN) 1 (IN) 2 (OUT) M x 0.5 Thread depth 5 Electrical entry can be on the either side, right or left Sectional view - (2:1) ø46 or more RZ12.5 ø4 ø4 510

7 Speed 2 Port Valve Series Control Method (Operation example with an energy saving driver circuit) 1. Control with 2 power supplies, starting power supply and holding power supply. Switching system from high voltage to low voltage -voltage power supply (24 VDC) Valve 2. speed switching control of high voltage by PWM control *. (*: PWM control circuit not currently available.) -voltage power supply (24 VDC) Valve Low-voltage power supply SW2 SW2 Voltage between terminals 24 VDC verage voltage 24 VDC type: to 6 VDC type: 4 to 8 VDC type: 8 to 16 VDC Specific Product Precautions Be sure to read this before handling the products. Refer to back page 50 for Safety Instructions and pages 17 to 19 for 2 Port Solenoid Valve for Fluid Control Precautions. Continuous Energization (at 24 VDC) Caution 1. type: Not available When operating with an energy saving driver, continuous energization with the holding voltage of to 6 VDC is possible. 2. type: Not available When operating with an energy saving driver, continuous energization with the holding voltage of 4 to 8 VDC is possible.. type: Please consult with SMC. When operating with an energy saving driver, continuous energization with the holding voltage of 8 to 16 VDC is possible W type: vailable Energized Time/Non-energized Time (When not using power saving driver) Caution 1. Non-energized time () must be set longer than the energized time (). 2. For use with voltages other than 24 VDC, please consult with SMC with the operating condition information of pressure, voltage, energized time and non-energized time. Others Caution 1. If the valve is energized without air supply, the coil may be burned. Make sure to supply pressure to the valve when energizing. 2. Please contact SMC for the product usage with a voltage at 75 VDC or more. Standard required by CE mark is different.. Since this valve is air return (differential pressure return) type, the valve may not close due to back pressure when the flow on the downstream side is restricted extremely. 4. Since this valve is air return (differential pressure return) type, the air is discharged to the OUT side momentarily until the valve returns when the IN side is pressurized. Be careful when pressurizing the valve. 511 VCH