5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in

Transcription

1 For details about certified products conforming to international standards, visit us at 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model position 3 position Type of actuation Single Double Closed center Exhaust center Pressure center Double check Plug-in VFS500 VFS500 VFS5300 VFS500 VFS5500 VFS600 Model Non plug-in VFS50 VFS50 VFS530 VFS50 VFS550 VFS560 Port size Flow characteristics / (P A/B) / 5/3 (A/B R/R) C C [dm 3 /(s bar)] b Cv [dm 3 /(s bar)] b Cv Note ) Based on JIS B 8375 (once per 30 days) for the minimum operating frequency. Note ) Based on JIS B (The value at supply pressure 0.5 MPa.) Note 3) The figures in the above list are without sub-plate. In the case of with plug-in sub-plate and, with non plug-in sub-plate add 3/8, /0.7 kg, 3/0.966 kg and 3/8, /0.577 kg, 3/0.83 kg respectively. Note ) Note ) and Note ) are with controlled clean air. Compact yet provides a large flow capacity 3/: C: 0 dm 3 /(s bar) Low power consumption:.8 W DC Easy maintenance types of sub-plates: Plug-in and non plug-in JIS position Single Double 3 position Closed center Exhaust center Pressure center Double check Standard Specifications Valve specifications Electricity specifications Fluid Maximum operating pressure Minimum operating pressure Proof pressure Ambient and fluid temperature Lubrication Shock/Vibration resistance Enclosure Coil rated voltage Allowable voltage fluctuation Coil insulation type Apparent power (Power consumption) AC Power consumption DC Electrical entry Option Specifications Inrush Holding or less 5 or less 55 or less 55 or less 55 or less 60 or less Air/Inert gas.0 MPa 0. MPa.5 MPa 0 to 60 C () Non-lube () Non-locking push type (Flush) 50/50 m/s (3) Type E: Dustproof (Level 0), Type F: Dripproof (Level ), Type D: Splashproof (Level ) () 00, 00 VAC, 50/60 Hz; VDC 5 to +0% of rated voltage Class B or equivalent (30 C) (5) 5.6 VA/50 Hz, 5.0 VA/60 Hz 3. VA (. W)/50 Hz,.3 VA (.5 W)/60 Hz.8 W (. W: With light/surge voltage suppressor) Conduit terminal Grommet terminal, DIN terminal Note ) Use dry air at low temperatures. Note ) Use turbine oil Class (ISO VG3), if lubricated. Note 3) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 5 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note ) Based on JIS C 090. Note 5) Based on JIS C 003. Pilot type Manual override Main valve Coil rated voltage Porting specifications Option Note) Operating pressure: 0 to.0 MPa Pilot pressure: 0. to.0 MPa Max. operating cycle (cpm) Response time (ms) Weight (kg) External pilot Note) Direct Non-locking push type (Extended), Locking type (Tool required), Locking type (Lever) 0 to 0, 0, 0 VAC (50/60 Hz), 00 VDC Bottom ported With light/surge voltage suppressor, Non-rotating DIN terminal () () (3) VK VZ VF VFR VP VZS VFS VS VQ7 EVS VFN

2 Body type O: sub-plate How to Order Electrical entry F: conduit terminal Porting specifications Side ported B Bottom ported In the case of external pilot (Option), bottom piping is not available. Plug-in VFS5 0 0 F Port size Without sub-plate Thread type N T F NPT NPTF G Non plug-in VFS5 0 5 D position single 5 3 position pressure center Option Z P ZP Electrical entry None With light/surge voltage suppressor Non-rotating DIN terminal Light/Surge Voltage Suppressor Non-rotating DIN terminal Type P, ZP is available for DIN type only. E: Grommet terminal D: DIN terminal Manual override : Non-locking push type (Flush) A : Non-locking push type (Extended) position double 3 position double check 3 position closed center 6 B : Locking type (Tool required) 3 3 position exhaust center Body type : sub-plate Coil rated voltage VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz VDC VDC 0 VAC, 50/60 Hz 9 Other C : Locking type (Lever) Body option 0 Standard Direct Pilot type R Internal pilot External pilot How to Order Pilot Valve Assembly SF Coil rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 3 0 to 0 VAC, 50/60 Hz 0 VAC, 50/60 Hz 5 VDC 6 VDC 7 0 VAC, 50/60 Hz 9 Other Refer to page for voltage conversion. F 30 Manual override A B C Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) Locking type (Lever)

3 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Cylinder Speed Chart Series VFS500- Conditions VFS500- Can hold an intermediate cylinder position for an extended time If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Average speed (mm/s) Tube bore x Length Speed controller Silencer Use as a guide for selection. Please confirm the actual conditions with SMC Sizing Program. Bore size Series CS Pressure 0.5 MPa Load factor 50% Stroke 300 mm ø5 ø0 ø0 ø80 ø00 ø50 ø300 It is when the cylinder is extending that is meter-out controlled by speed controller which is directly connected with cylinder, and its needle valve with being fully open. The average velocity of the cylinder is what the stroke is divided by the total stroke time. Load factor: ((Load weight x 9.8)/Theoretical force) x 00% Double check spacer Series CS SGP0A x m AS500- AN500- Double Check Spacer/Specifications Specifications Double check spacer part no. Applicable valve model Leakage (cm 3 /min) Caution VVFS5000-A- VFS500- F Solenoid one side energized Solenoid both sides de-energized Supply pressure: 0.5 MPa Perpendicular, upward actuation Horizontal actuation VVFS5000-A- VFS50- D VFS50- E In the case of 3 position double check valve (VFS56 0), check the leakage from piping and fittings in between valve and cylinder by means of synthetic detergent solutions, and ensure that there is no such leakage found there. Also check the leakage from cylinder seal and piston seal. If there is any leakage, sometimes the cylinder, when valve is de-energized, can move without stopping at intermediate position. Be aware that if the exhaust side is restricted excessively, the intermediate stopping accuracy will decrease and will lead to improper intermediate stops. P P A B R 30 R or less R 30 R or less R 0 R Check Valve Operation SUP side pressure P (MPa) Piston Cylinder side pressure Operating range The combination of VFS5 0, VFS5 0 and a double check spacer can be used as prevention of falling at the stroke end but cannot hold the intermediate position of the cylinder. 0 Check valve SUP side pressure (P) Cylinder side pressure P (MPa) 0 VK VZ VF VFR VP VZS VFS VS VQ7 EVS VFN

4 Construction position single position double Closed center 3 position closed center/exhaust center/pressure center Exhaust center Pressure center Component Parts No. Description q Body w Sub-plate e Spool/Sleeve r Adapter plate t End plate y Piston u Junction cover i Light cover Material Aluminum die-casted Aluminum die-casted Stainless steel Aluminum die-casted Aluminum die-casted Resin Resin Resin Note Platinum silver Platinum silver Black Black Sub-plate Assembly Part No. 03 Plug-in VFS5000-P- 03 Non plug-in VFS5000-S- Mounting bolt and gasket are not included. Part no. for mounting bolt and gasket BG-VFS5000 Replacement Parts No. Description Material Part no. VFS5 VFS5 VFS53 /5 /55 o!0 Return spring Gasket Stainless steel NBR VFS AXT67-0- AXT67-0- AXT67-8 AXT67-0-! Hexagon socket head screw Steel M5 x 50 M5 x 50 M5 x 50! Detent assembly AXT50-9!3 assembly Refer to How to Order Pilot Valve Assembly on page

5 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Plug-in position single/double, 3 position closed center/exhaust center/pressure center/double check position single: VFS500- F -ø7 mounting hole Bottom ported 5-3/8, /, 3/ 3(R), 5(R): / VK VZ With light/surge voltage suppressor VF Direct /8 external pilot (Port size: 3/8, /) (B), (A) port VFR VP VZS VFS G / electrical entry 5-3/8, /, 3/ 8 (Pilot EXH port) /8 external pilot (Port size: 3/) VS VQ7 position double: VFS500- F 3 position closed center: VFS5300- F 3 position exhaust center: VFS500- F 3 position pressure center: VFS5500- F 9.3 (8) 3 position 7.3 (6) -ø7 mounting hole 3 position double check: VFS5600- F -ø7 mounting hole ( ): 3 EVS VFN With light/surge voltage suppressor With light/surge voltage suppressor Direct Direct G / electrical entry G / electrical entry 5-3/8, /, 3/ 5-3/8, /, 3/ ( ): 3/ ( ): 3/

6 Non Plug-in position single/double, 3 position closed center/exhaust center/pressure center/double check position single: VFS50- E, VFS50- D -ø7 mounting hole 5-3/8, /, 3/ 3/: 3(R), /: 5(R) G Applicable cabtire cable O.D. ø8 to ø0 /8 external pilot (Port size 3/8, /) (B), (A) port Direct - /8 (Pilot EXH port) /8 external pilot (Port size: 3/) 5-3 8,, 3 position double: VFS50- E, VFS50- D 3 position closed center: VFS530- E, VFS530- D 3 position exhaust center: VFS50- E, VFS50- D 3 position pressure center: VFS550- E, VFS550- D ( ): 3/ 3 position double check: VFS560- E, VFS560- D -ø7 mounting hole 0.5 (3 position: 09.5) -ø7 mounting hole G Applicable cabtire cable O.D. ø8 to ø0 G Applicable cabtire cable O.D. ø8 to ø0 Direct manual override Direct manual override 5-3 8,, ,, 3 ( ): 3/ ( ): 3/

7 Manifold Specifications Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be wired at the bottom of terminal block. VV5FS5 Manifold with terminal block 0T 0 stations Plug-in Type: With Multi-connector (Wiring specifications: Refer to page ) Master connection of power and solenoid valves. VV5FS5 0C Quick wiring permits easier installation. 0 stations Manifold Multi-connector Plug assembly (Option) Refer to page with multi-connector Connector mounting direction D U 0 0 stations Passage Porting specifications P R, R (A, B) Side Common Common Bottom mounting mounting D stations Max. 8 stations Passage Porting specifications P R, R (A, B) Side Common Common Bottom Port size M P, R, R A, B N T 3 3 F Mixed For bottom ported, is only available. Port size M P, R, R A, B N T 3 3 F Mixed For bottom ported, is only available. Thread type NPT NPTF G Thread type NPT NPTF G VK VZ VF VFR VP VZS VFS VS VQ7 EVS VFN Plug-in Type: With D-sub Connector (Wiring specifications: Refer to page ) Wide range of interchangeability (MIL Spec. D-sub connector terminal VV5FS5 5 pcs attached.) Quick wiring permits easier installation. Manifold with D-sub connector D-sub connector Non Plug-in Type: Grommet Terminal, DIN Terminal Wiring for every valve. Grommet terminal DIN terminal Plug assembly (Option) Refer to page Connector mounting direction D U mounting mounting VV5FS5 Manifold 0F 0 D 0 stations 0 stations stations Max. 8 stations Passage Porting specifications P R, R (A, B) Side Common Common Bottom 05 0 stations M Passage Porting specifications P R, R (A, B) Side Common Common Bottom Port size M Port size P, R, R A, B N T 3 3 F Mixed For bottom ported, is only available. P, R, R A, B 3 3 Mixed For bottom ported, is only available. Thread type NPT NPTF G Thread type N T F NPT NPTF G 3-8-9

8 How to Order Manifold Assembly Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block: 6 stations (Manifold base) VV5FS5-0T-- ( position single) VFS500-5FZ 3 ( position double) VFS500-5FZ (Blanking plate) VVFS5000-0A : 6 stations (Manifold base) VV5FS5-0-- ( position single) VFS50-5D 5 (3 position exhaust center) VFS50-5D (Individual EXH center) VVFS5000-R-- Manifold Specifications Base model VV5FS5-0 VV5FS5-0 Wiring With terminal block With multi-connector With D-sub connector DIN terminal Grommet terminal Port size A, B port P, R, R A, B 3, 3 With multi-connector, or with D-sub connector: 8 stations max. VFS5 00- F VFS5 0- D VFS5 0- E Flow Characteristics at the Number of Manifold (Operated individually) Model VV5FS5 Passage/ / (P A/B) / 5/3 (A/B R/R) Port size: /, 3/ C [dm 3 /(s bar)] 6.0 b 0.0 Cv C [dm 3 /(s bar)] b Cv Porting specifications Side/ Bottom to 0 Applicable valve model Station Station 5 Station Manifold Option Parts Assembly Individual SUP spacer An individual SUP spacer set on manifold block can form SUP port for every valve. Body type Part no. VVFS5000-P-- VVFS5000-P-- Throttle valve spacer Needle valve set on the manifold block can control cylinder speed by throttling exhaust. Body type Part no. VVFS5000-0A- VVFS5000-0A- Manifold Option With exhaust cleaner / Valve exhaust noise dampening: 35 db or more. Oil mist collection: Rate of collection 99.9% or more. Piping process reduced. Individual EXH spacer An individual EXH spacer set on manifold block can form EXH port for every valve. (common EXH type) Body type Part no. VVFS5000-R-- VVFS5000-R-- SUP block disk When supplying manifold with more than two different pressures, high and low, insert a block disk in between stations subjected to different pressures. Body type Part no. AXT68-A EXH block disk When valve exhaust affects the other stations on the circuit or when a reverse pressure valve is used on a standard manifold valve, insert EXH block disk in between stations to separate valve exhaust. Body type Part no. AXT5--A Double check spacer If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. Body type Part no. VVFS5000-A- VVFS5000-A- Interface regulator Interface regulator set on manifold block can regulate the pressure to each valve. (In the event of using, refer to Flow Characteristics on page 3-8-6). Body type P port regulation A port regulation B port regulation ARBF P- ARBF A- ARBF B- ARBF P- ARBF A- ARBF B- For details, refer to page With serial interface unit for serial transmission Solenoid valve wiring process reduced considerably. Disperse installation possible. Manifold solenoid valve: 8 stations max. 3 positions (5 solenoids). Maintenance and inspection are easy. For details, refer to Serial Transmission catalog separately. EXH block disk SUP block disk Blanking plate It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. Body type Part no. VVFS5000-0A 3-8-9

9 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Manifold, (With terminal block): VV5FS5-0T- Station - Port size Direct VK VZ Pitch P = 5 n- Bottom ported: VV5FS5-0T- Station - Port size -G Electrical entry Formula for manifold weight M = 0.9n +.6 (kg) n: Station ( ): (B)/(A) port 3 : VV5FS5-0- Station - Port size (External pilot) - 8 (Pilot EXH) n- /, 3/ VF VFR VP VZS VFS VS VQ7 EVS VFN Direct Pitch P = 5 n- DIN terminal VV5FS5-0- Station - Port size G n-, 3 Grommet with terminal Applicable cabtire cable O.D. ø8 to ø (External pilot) - 8 (Pilot EXH) - 8 (External pilot) - 8 (Pilot EXH) 6-3 L L L Formula L = 5 x n + 9 L = 5 x n + 0 Formula for manifold weight M = 0.8n +.3 (kg) n: Station ( ): (B)/(A) port

10 Manifold with multi-connector/d-sub connector with multi-connector: VV5FS5-0CD- Station - Port size, VV5FS5-0CU- Station - Port size Direct Pitch P = 5 n-, 3 n- Bottom ported: CD VV5FS5-0 - Station - Port size CU Plug assembly VVFS000-30A- (Option: Refer to page ) - 8 (Pilot EXH) - 8 (External pilot) Formula for manifold weight M = 0.9n (kg) n: Station Refer to page For wiring specifications. ( ): (B)/(A) port 3 with D-sub connector: VV5FS5-0FD- Station - Port size, VV5FS5-0FU- Station - Port size Direct Pitch P = 5 n- n-, 3 Bottom ported: FD VV5FS5-0 - Station - Port size FU Formula for manifold weight M = 0.9n (kg) n: Station Refer to page For wiring specifications. Plug assembly VVZS3000-A- (Option: Refer to page ) - 8 (External pilot) - 8 (Pilot EXH) L L L Formula L = 5 x n + 9 L = 5 x n ( ): (B)/(A) port

11 Manifold with Exhaust Cleaner 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Serves to protect working environment. Valve exhaust noise dampening: 35 db or more. Collection rate of drainage and oil mist: 99.9% or more. Piping work is reduced. Exhaust cleaner (Option) Exhaust cleaner (Option) Manifold Specifications Manifold : VV5FS5-0 : VV5FS5-0 Wiring With terminal blocks DIN terminal With multi-connector With D-sub connector Grommet terminal Applicable valve model VFS5 00- F VFS5 0- D, VFS5 0- E Common SUP/Common EXH Porting specifications (B), (A) port Side: RC /, 3/, Bottom: / (Option) (P), 3(R), 5(R) port P: 3/, EXH: / to 0 () Applicable exhaust cleaners AMC80- (Connecting port size R /) () Note ) With multi-connector, or with D-sub connector: 8 stations max. Note ) Exhaust cleaner: Not attached. VV5FS5 Manifold Base type/electrical entry 0T with terminal block 0C with multi-connector 0F with D-sub connector 0 Connector mounting direction With connector Applicable base None 0T, 0 D mounting 0C, 0F U mounting How to Order 0 CD 0 stations 0 0 stations Base type 0T, 0: to 0 stations Base type 0C, 0F: to 8 stations Thread type N T F Port size M P 3 NPT NPTF G Exhaust cleaner mounting direction CD CU A, B 3 Mixed Exhaust cleaner mounting direction mounting mounting For bottom ported, is only available. Passage Porting specifications P R, R (A, B) Side Common Common Bottom VK VZ VF VFR VP VZS VFS VS VQ7 EVS VFN Caution When using an exhaust cleaner, mount it downwards. Refer to Best Pneumatics Vol. 5 for Exhaust Cleaner details. Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block (6 stations) (Manifold base) VV5FS5-0T---CD ( position single) VFS500-5FZ ( position double) VFS500-5FZ (Blanking plate) VVFS5000-0A (Exhaust cleaner) AMC80- (6 stations) (Manifold base) ( position single) ( position double) (Blanking plate) (Exhaust cleaner) VV5FS5-0---CU VFS50-5E VFS50-5E VVFS5000-0A AMC

12 Manifold with Exhaust Cleaner, : VV5FS5-0T- Station - Port size - CD CU Direct manual override n-, 3 R 50 AMC80- Exhaust cleaner (Option) mounting -G / Electrical entry mounting - 3/ ( ): (B)/(A) port 3/ : VV5FS5-0- Station - Port size - CD CU Direct manual override n-, 3 R Exhaust cleaner (Option) mounting mounting - 8 ( ): (B)/(A) port 3/ - 3 L L L n: Formula L = 5 x n + 9 L = 5 x n

13 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Manifold Option Parts Individual SUP spacer: VVFS5000-P-- () VVFS5000-P-- (), Double check spacer: VVFS5000-A- () VVFS5000-A- () Individual SUP spacer Double check spacer VK VZ VF Individual EXH spacer: VVFS5000-R-- () VVFS5000-R-- () Interface regulator/p port regulation: ARBF P- () ARBF P- () VFR VP VZS VFS Individual EXH spacer Interface regulator VS VQ7 EVS SUP block disk: AXT68-A EXH block disk: AXT5--A Interface regulator/a port regulation: ARBF A- () ARBF A- () VFN Interface regulator Block disk mounting position ( ) : SUP block disk Throttle valve spacer: VVFS5000-0A- () VVFS5000-0A- () Interface regulator/b port regulation: ARBF B- () ARBF B- () Interface regulator Throttle valve spacer

14 Manifold Base Construction, End plate () Manifold block End plate () Replacement Parts No. q w e r t y u i o!3 Description Connection fitting A Connection fitting B O-ring O-ring O-ring O-ring O-ring Terminal assembly Junction cover assembly Rubber plug Material Steel plate Steel plate NBR NBR NBR NBR NBR For 0T For 0SU NBR Replacement Parts: Sub Assembly No.!0!! Description Manifold block assembly End plate () assembly End plate () assembly Part no. AXT68-6-A AXT68-6- AS568-0 AS AS AS568-0 AS568- AXT68-5-A VVFS5000-A- AZ738-3A- AXT336-9 Assembly part no. VVFS5000-A-- VVFS5000-A-- VVFS5000-A- VVFS5000-A- VVFS5000-3A- VVFS5000-3A- For increasing the manifold bases, please order the manifold block assembly number of the principal part assembly!0. For plug-in type: The manifold base with terminal stand (integrated with a junction cover) is required with the o junction cover assembly. Note) Manifold Base/Construction: with terminal block. Component parts Manifold block!0, Metal joint q, w, Terminal i, O-ring e, r, t, y, u, Receptacle assembly Manifold block!0, Metal joint q, w, O-ring e, r, t, y, u End plate (U)!, Metal joint q, w End plate (U)!, Metal joint q, w End plate (D)!, Metal joint q, w, O-ring e, r, t, y, u End plate (D)!, Metal joint q, w, O-ring e, r, t, y, u Applicable manifold base

15 S OLENOID VALVES S ERIES NVFS.75 M O D E L NVFS5000 S Y M B O L S Position Number Of Type Port Size Cv Response Position 3 Position Solenoid Single Double Closed Center Exhaust Center Pressure Center Perfect (Double Check) Plug-In NVFS500 NVFS500 NVFS5300 NVFS500 NVFS5500 NVFS5600 (NPTF) 3/8 / 3/ 3/8 / 3/ 3/8 / 3/ 3/8 / 3/ 3/8 / 3/ 3/8 / 3/ Factor Time (ms) 5 or less 5 or less 55 or less 55 or less 55 or less 60 or less T ECHNICAL SPECIFICATIONS S T ANDARD T ECHNICAL SPECIFICATIONS O PTIONAL Fluid Air and Inert Gas Pilot Type External Pilot Type Max Operating Pressure 50 PSI (MPa) Manual Override Main Valve Direct Manual Override Type Min Operating Pressure 5 PSI (0.5MPa) Pilot Operator Non Locking Push Type (Extended), Valve Ambient & Fluid Temperature Note ) ~0ºF (-0~60ºC) Lock Type (Tool), Lock Type (Lever) Lubrication Note ) Not Required Voltage AC 00V50/60Hz, 00V50/60Hz Pilot Operator Manual Override Non Locking Push Type (Flush) DC 6V, 8V, 00V Protection Construction Dust Proof Porting Bottom Ported Subplate Rated AC 0VAC50/60Hz, 0V50/60Hz, V50/60Hz Option W/Indicator Light & Surge Voltage DC V, V Voltage Suppressor Allowable Voltage Range -5 ~ 0% Rated Voltage Coil Insulation Class B or Equivalent Electrical Apparent Power AC InRush 5.0VA/60Hz, 5.6VA/50Hz (Power Consumption) Holding.3VA(.5W)/60Hz, 3.VA(.W)/50Hz Power Consumption DC.8W Electrical Entry Plug In Conduit Terminal (Base Access) Note ) Use Dry Air at Low Temperature Note ) Use Turbine Oil No (ISOVG3), if lubricated FOR FURTHER TECHNICAL DETAILS ON THIS PRODUCT, REQUEST CATALOG REFERENCE N33

16 .76 S OLENOID VALVES S ERIES NVFS H O W T O O R D E R NVFS5000 NVFS 5 0 F P OSITION Position Single Position Double 3 3 Position Closed Center 3 Position Exhaust Center 5 3 Position Pressure Center 6 3 Position Perfect B ODY T YPE 0 Plug-In Type P ORTING - Side *B Bottom Note) */8 NPTF Only P ORT S IZE - Without Subplate 03T 3/8 NPTF T / NPTF T 3/ NPTF M ANUAL O PTION 0 Standard Std & Direct Manual (Special Order) P ILOT O PERATOR - Internal R External (Special Order) V OLTAGE 00VAC (Special Order) 00VAC (Special Order) 3 0VAC 0VAc 5 VDC 6 VDC 9 Others (Special Order) E LECTRICAL E NTRY F Through Base M ANUAL O VERRIDE - Non Locking Push Type (Flush) *A Non Locking Push Type (Extended) B Lock Type (Screw Type) *C Lock Type (Lever) Note) * Special Order O PTIONS - None Z With Indicator Light and Surge Voltage Suppressor H O W T O O R D E R M ANIFOLD FOR FURTHER TECHNICAL DETAILS ON THIS PRODUCT, REQUEST CATALOG REFERENCE N33

17 S OLENOID VALVES S ERIES NVFS.77 H O W T O O R D E R M ANIFOLD / OPTION P ARTS ASSEMBLY FOR FURTHER TECHNICAL DETAILS ON THIS PRODUCT, REQUEST CATALOG REFERENCE N33