Manifold Specifications Stacking Type

Transcription

1 Specifications Stacking Type Keeps environmental air clean from pilot exhaust Use of the VV5FS- manifold can exhaust intensively the pilot exhaust gas to the base side, and can prevent environmental aggravation due to noise and oil mist. VV5FS- for mounting bolt and gasket BG-VFS00 Exploded View of block assembly VVFS000-A-0 Hexagon socket head cap screw: M4 x 5 (AXT5-7-) Specifications Port Specifications Option base type (P) Common Passage (R), 5(R) Common How to Order Base Stacking type Max. 5 stations Porting specifications: Rc Base Valve Base (P) Side: 8 (B), 4(A) Top:, 4 8 (R), 5(R) Side: 8 Blanking plate VVFS000-0A- With gasket, screw SUP block disk AXT66-0A EXH block disk AXT66-A Note) Individual SUP or EXH is possible with bottom porting of SUP or EXH. For your order, please indicate it in the manifold specification sheet. VV5FS 05 0 stations 5 5 stations Thread type Nil Rc N NPT T NPTF F G Option P, EA, EB port size 0-Rc 8 Passage Porting specifications (P) (R), 5(R) (B), 4(A) Common Common Top Rc 8 Rc 8 Rc, Rc 4 8 VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Gasket Base model Model Pilot exhaust Pilot common EXH Applicable valve model Type 0 Type 0 VFS VFS Note) Also VFS 0 is possible to manifold. In this case, it uses an individual pilot exhaust. For increasing the manifold bases, please prepare the manifold block assembly no. How to Order Assembly Instruct by specifying the valves and blanking plate to be mounted on the manifold along with the manifold base model no. <Example> ( base) ( position single) ( position double) (Blanking plate) VV5FS VFS0-D- VFS0-D- VVFS000-0A- -8-

2 Type Grommet: G Pilot common exhaust: VV5FS-- Station -0 n-rc /4, /8 M4 x 5 Rc /8 External pilot port 6-Rc /8 4-ø7 mounting hole P = Blanking plate 4-Rc /8 Pilot EXH port: PE 00 (Lead wire length) Gasket Formula for manifold weight M = 0.84n (kg) n: Station Grommet terminal: E/EZ Conduit terminal: T/TZ DIN terminal: D/DZ/Y/YZ Lead wire O.D. Max. ø.5 Applicable heavy-duty cord O.D. ø6 to ø8 Applicable heavy-duty cord O.D. ø6 to ø8 (Y: ø4.7 to ø7) position (04) Double (94) Single (5) position (4) Double () Single (5) position (40) Double (0) Single (5) 4-Rc /8 Pilot EXH port: PE (With light/surge voltage suppressor: 04.5) 6-Rc /8 6-Rc /8 4-Rc /8 Pilot EXH port: PE (With light/surge voltage suppressor: 09) 6-Rc /8 4-Rc /8 Pilot EXH port: PE (With light/surge voltage suppressor: 9.5 (.5)) L (With light/surge voltage suppressor: 4) L L (With light/surge voltage suppressor: 9) (With light/surge voltage suppressor: 8.5 (0.5)) ( ): Y, YZ n: Station Formula L = x n + 5 L = x n

3 Specifications Plug-in Type: With Terminal Block Since lead wires of solenoid valve are connected with the terminals on upper surface of terminal block, corresponding lead wires from power source can be wired at the bottom of terminal block. Master connection of power and solenoid valves. Quick wiring permits easier installation. Wide range of interchangeability (MIL Spec DIN connector terminal 5 pcs attached.) Quick wiring permits easier installation. VV5FS 0T with terminal block stations VV5FS D U D U 0 0C 0 stations Plug-in Type: With Multi-connector (Wiring specifications: Refer to page -8-8.) D Connector mounting with multi-connector Plug-in Type: With D-sub Connector Terminal block Multi-connector D-sub connector Plug assembly (Option) Refer to page VV5FS with D-sub connector Plug assembly (Option) Refer to page direction mounting mounting stations 0F mounting mounting Thread type Port size P, EA, EB A, B Nil N Rc NPT Rc 4 T Rc NPTF 0 Rc 8 F G M Mixed Option Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom Option stations Max. 8 stations (Wiring specifications: Refer to page -8-8.) D Connector mounting direction stations 08 8 stations Max. 8 stations Thread type Port size Nil Rc P, EA, EB A, B N NPT Rc T NPTF 0 Rc Rc 8 F G M Mixed Option Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom Option 06 4 Thread type Port size Nil Rc P, EA, EB A, B N NPT Rc T NPTF 0 Rc Rc 8 F G M Mixed Option Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom Option VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Non Plug-in Type: Grommet Terminal, DIN Terminal Wiring for every valve. Grommet terminal DIN terminal VV5FS 0 0 stations 0 stations 05 Thread type Port size Nil Rc P, EA, EB A, B N NPT Rc T NPTF 0 Rc Rc 8 F G M Mixed Option Passage Porting specifications P EA, EB (A, B) Side Common Common Bottom Option -8-59

4 How to Order Assembly Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block: 6 stations ( base) VV5FS-0T-06- ( position single) VFS00-5FZ ( position double) VFS00-5FZ (Blanking plate) VVFS000-0A <Example> : 6 stations ( base) VV5FS ( position single) VFS0-5D 5 ( position exhaust center) VFS40-5D (Individual EXH spacer) VVFS000-R-0- Option Parts Assembly Individual SUP spacer An individual SUP spacer set on manifold block can form SUP port for every valve. VVFS000-P-0- VVFS000-P-0- Specifications Base model VV5FS-0 VV5FS-0 Wiring With terminal block With multi-connector With D-sub connector DIN terminal Grommet terminal Flow Characteristics at the Number of (Operated individually) Model VV5FS Throttle valve spacer Needle valve set on the manifold block can control cylinder speed by throttling exhaust. Porting specifications A, B port Side/ Bottom Port size Rc P, EA, EB A, B () () 4, 8 to 0 Note ) Appropriate silencer for EA, EB port: AN40-04 (O.D. ø7). Note ) With multi-connector, or with D-sub connector: 8 stations max. Port size: Rc /8 Passage/ 4/ (P A/B) 4/ 5/ (A/B R/R) VVFS000-0A- C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv VVFS000-0A- Applicable valve model VFS 00- F VFS 0- D VFS 0- E Station Station 5 Station Option With exhaust cleaner /Non Valve exhaust noise dampening: 5 db or more. Oil mist collection: Rate of collection 99.9% or more. Piping process reduced. Individual EXH spacer An individual EXH spacer set on manifold block can form EXH port for every valve. (common EXH type) VVFS000-R-0- SUP block disk EXH block disk VVFS000-R-0- When supplying manifold with more than two different pressures, high and low, insert a block disk in between stations subjected to different pressures. AXT66-A When valve exhaust affects the other stations on the circuit or when the reverse pressure valve is used to standard manifold valve, insert EXH block disk between stations to separate valve exhaust. AXT66-A Double check spacer If the double check spacer with a built-in double check valve is combined, it will enable the cylinder to stop in the intermediate stroke and maintain its position for a long time without being affected by the leakage between the spools. VVFS000-A- VVFS000-A- Interface regulator Interface regulator set on manifold block can regulate the pressure to each valve. (Refer to page -8-6 for Flow Characteristics.) P port regulation A port regulation B port regulation ARBF P- ARBF A- ARBF B- ARBF P- ARBF A- ARBF B- For details, refer to page With control unit /Non Filter, regulation valve, pressure switch and air release valve are all combined to form one unit. Piping processes are eliminated. For details, refer to page With serial interface unit for serial transmission Solenoid valve wiring process reduced considerably. Disperse installation possible. solenoid valve: 8 stations max. positions (5 solenoids). Maintenance and inspection are easy Blanking plate It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. VVFS000-0A For details, refer to Serial Transmission catalog separately.

5 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in, (With terminal block): VV5FS-0T- Station - Port size n-rc 4, 8 Bottom ported: VV5FS-0T- Station - Port size Formula for manifold weight M = 0.405n (kg) n: Station -Rc 8 (Pilot EXH port: PE) : VV5FS-0- Station - Port size -G /4 Electrical entry n-rc 4, 8 Light window -Rc 8 (External pilot port) VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN n-rc 4, 8 n-rc 4, 8 Light window Bottom ported: VV5FS-0- Station - Port size Applicable cabtire cable O.D. ø8 to ø0 -Rc 8 (Pilot EXH port: PE) -Rc 8 (External pilot port) 6-Rc L Formula for manifold weight M = 0.09n (kg) L L n: Formula L = x n + 6 L = x n

6 with multi-connector/d-sub connector with multi-connector: VV5FS-0CD- Station - Port size, VV5FS-0CU- Station - Port size n-rc 4, 8 Bottom ported: VV5FS-0 - Station - Port size CD CU Plug assembly VVFS000-0A- (Option: Refer to page -8-8.) Light window n-rc 4, 8 -Rc /8 (Pilot EXH port: PE) -Rc /8 (External pilot port) 6-Rc / Formula for manifold weight M = 0.4n (kg) n: Station Wiring specifications: Refer to page with D-sub connector: VV5FS-0FD- Station - Port size, VV5FS-0FU- Station - Port size n-rc 4, 8 n-rc 4, 8 Light window Bottom ported: FD VV5FS-0 - Station - Port size FU Formula for manifold weight M = 0.4n (kg) n: Station Wiring specifications: Refer to page Plug assembly VVZS000-A- (Option: Refer to page -8-8.) -Rc /8 (Pilot EXH port: PE) -Rc /8 (External pilot port) L L L n: Formula L = x n + 6 L = x n Rc / -8-6

7 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in with Exhaust Cleaner Serves to protect working environment. Valve exhaust noise dampening: 5 db or more. Collection rate of drainage and oil mist: 99.9% or more. Piping work is reduced. Exhaust cleaner AMC60-0 (Option) Exhaust cleaner AMC60-0 (Option) Specifications Wiring : VV5FS-0 With terminal blocks With multi-connector With D-sub connector : VV5FS-0 DIN terminal Grommet terminal Applicable valve model VFS 00- F VFS 0- D, VFS 0- E Common SUP, Common EXH Porting specifications (B), 4(A) port Rc /4, /8 Rc (P), (R), 5(R) port P: Rc /, EXH: Rc to 0 () Applicable exhaust cleaners AMC60-0 (Connecting port size R ) () Note ) With multi-connector, or with D-sub connector: 8 stations max. Note ) Exhaust cleaner AMC60-0 is not attached. VV5FS Base type/electrical entry 0T 0C with terminal block with multi-connector 0F 0 with D-sub connector Connector mounting direction With connector Applicable base Nil D U None mounting mounting CD 0T, 0 0C, 0F stations 0 0 stations Base type 0T, 0: -0 stations Base type 0C, 0F: -8 stations How to Order Nil N T F Option Port size Exhaust cleaner mounting direction Exhaust cleaner mounting direction CD CU Thread type Rc NPT NPTF G P A, B Rc 4 Rc 0 Rc 8 M Mixed Passage Porting specifications P R, R (A, B) Side Common Common Bottom Option mounting mounting VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Caution When using an exhaust cleaner, mount it downwards. For details about exhaust cleaners, refer to Best Pneumatic Vol. 5. Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block (6 stations) ( base) VV5FS-0T-06-0-CD ( position single) VFS00-5FZ ( position double) VFS00-5FZ (Blanking plate) VVFS000-0A (Exhaust cleaner) AMC60-0 (6 stations) ( base) VV5FS CU ( position single) VFS0-5E ( position double) VFS0-5E (Blanking plate) VVFS000-0A (Exhaust cleaner) AMC

8 with Exhaust Cleaner : VV5FS-0T- Station - Port size - CD CU, Pilot valve manual override Light n-rc 4, 8 Exhaust cleaner (Option) 5 -Rc /8 (Pilot EXH port: PE) -G /4 Electrical entry -Rc /8 (External pilot port: X) 6-Rc / mounting mounting : VV5FS-0- Station - Port size - CD CU n-rc 4, 8 Light 5 Exhaust cleaner (Option) -Rc /8 (Pilot EXH port: PE) -Rc /8 (External pilot port: X) 6-Rc / mounting mounting L L L n: Formula L = x n + 6 L = x n

9 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in with Control Unit Control unit (Filter, Regulator, Pressure switch, Air release valve) are all standardized to the one unit, and can be mounted on the manifold base without any attachments. Piping processes are eliminated. Specifications : VV5FS-0 : VV5FS-0 With terminal block DIN terminal Wiring With multi-connector Grommet terminal With D-sub connector Applicable valve model VFS 00- F VFS 0- D, VFS 0- E Common SUP, Common EXH Porting specifications (B), 4(A) port Rc /4, /8 Rc (P), (R), 5(R) port Rc / to 0 With multi-connector, or with D-sub connector: 8 stations max. Control Unit Specifications Air filter (With auto-drain/with manual drain) Filtration degree 5 µm Regulator Set pressure (Outlet pressure) 0.05 to 0.85 MPa Pressure switch () Set pressure range: OFF 0. to 0.6 MPa Differential 0.08 MPa or less Contact a Indicator light LED (RED) Max. switch capacity VA AC, W DC 4 VAC/DC or less: 50 ma Max. operating current 00 VAC/DC: 0 ma Air release valve (Single only) Operating pressure range 0. to.0 MPa VV5FS 0 08 AP Base type/electrical entry 0T with terminal block 0C with multi-connector 0F with D-sub connector 0 Connector mounting direction With connector Applicable base Nil None 0T, 0 D mounting 0C, 0F U mounting stations Passage 0 0 stations P EA, EB Base type 0T, 0: to 0 stations Common Common Base type 0C, 0F: to 8 stations Option Port size P, EA, EB Rc 0 M Caution When using an air filter with auto-drain or manual drain, mount the filter vertically. Porting specifications (A, B) Side Bottom How to Order A, B Thread type Rc 4 Rc Nil Rc 8 N Mixed NPT NPTF G T F Option Control Unit/Option Air release () valve spacer Pressure () switch Blanking plate <> VVFS000-4A-R ( mounting) <> VVFS000-4A-R ( mounting) Filter regulator Pressure switch Release valve IS000P-- MP- MP- VVFS000-4A-0 Filter element INA B Note ) Voltage: 4 VDC to 00 VAC Inner voltage drop: 4 V Note ) Combination of valve VFS (single) and a release valve spacer can be used an air release valve. Note ) The non plug-in type cannot be mounted afterwards. Air release valve coil rating Nil None (F, G type only) VAC, 50/60 Hz 4 VDC Other Control unit type Control equipment Nil A AP M MP F G C E Air filter with auto-drain Air filter with manual drain Regulator Air release valve Pressure switch Blanking plate (Air release valve) Blanking plate (Filter, Regulator) Blanking plate (Pressure switch) Number of manifold blocks required for mounting (stations) Please indicate manifold base type, corresponding valve, and option parts. <Example> with terminal block In order to mount control unit, it requires stations. ( base) ( position single) ( position double) <Example> VV5FS-0T-08-0-AP5 VFS00-5FZ VFS00-5FZ 4 In order to mount control unit, it requires stations. ( base) ( position single) VV5FS A VFS0-5D 4 VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN -8-65

10 with Control, : VV5FS-0T- Station - Port size -AP Voltage for release valve n-rc 4, 8 Example for manifold Individual EXH spacer (VVFS000-R-0-) Double check spacer (VVS000-A-) Individual SUP spacer (VVFS000-P-0-) 08 Light Pressure switch Air release valve (95: -MP) Rc / (Po port) -Rc /8 (External pilot port: X) Air release valve Air filter regulator Pressure switch Outlet for check Control unit -Rc 8 (Pilot EXH port: PE) 9 -G 4 Electrical entry : VV5FS-0- Station - Port size -AP Voltage for release valve n-rc 4, 8 Example for manifold (B) 4(A) (B) 4(A) (B) 4(A) Individual EXH spacer (VVFS000-R-0-) Double check spacer (VVFS000-A-) Individual SUP spacer (VVFS000-P-0-) Pressure switch Air release valve Light Air release valve Pressure switch Outlet for check (95: -MP) Air filter regulator Control unit 08 -Rc 8 (Pilot EXH port: PE) 9 Rc / (Po port) -Rc 8 (External pilot port: X) 6-RC / L L L L (MP) L (AP) Formula L = x n + 6 L = x n L = x n L = x n

11 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Option Parts Individual SUP spacer: VVFS000-P-0- () VVFS000-P-0- (), Double check spacer: VVFS000-A- () VVFS000-A- () (57: With direct manual override) Individual SUP spacer Individual EXH spacer: VVFS000-R-0- () VVFS000-R-0- () (57: With direct manual override) Individual EXH spacer SUP/EXH block disk: AXT66-A Interface regulator/p port regulation: ARBF P- () ARBF P- () (68: With direct manual override) Interface regulator Double check spacer Interface regulator/a port regulation: ARBF A- () ARBF A- () VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Block disk mounting position (68: With direct manual override) Interface regulator Throttle valve spacer: VVFS000-0A- () VVFS000-0A- () Interface regulator/b port regulation: ARBF B- () ARBF B- () (57: With direct manual override) Throttle valve spacer (68: With direct manual override) Interface regulator -8-67

12 Base Construction, End plate () End plate () Replacement Parts No. q w e r t y u i o! Description Connection fitting A Connection fitting B Gasket Gasket O-ring O-ring O-ring Terminal assembly Junction cover assembly Rubber plug Material Steel plate Steel plate NBR NBR NBR NBR NBR For 0T For 0SU NBR Replacement Parts: Sub Assembly VVFS000-5-A VVFS VVFS VVFS x 6.6 x.6 (End plate) 0 x 6 x ( block) 6. x x.6 VVFS000-6A VVFS000-4A- AZ78-A- AXT6-9 For increasing the manifold bases, please order the manifold block assembly number of the principal part assembly!0. For plug-in type: The manifold base with terminal stand (integrated with a junction cover) is required with the o junction cover assembly. Note) Base/Construction: Plug-in with terminal block. No. Description Assembly part no. Component parts Applicable manifold base!0!! block!0, Terminal i, Metal joint q, w, block VVFS000-A-- 0 Gasket e, r, O-ring y, u, Receptacle assembly assembly VVFS000-A-- block!0, Metal joint q, w, Gasket e, r, O-ring y, u 0 End plate () VVFS000-A- End plate (D)!, Metal joint q, w, Gasket e assembly VVFS000-A- End plate (D)!, Metal joint q, w, Gasket e End plate () assembly VVFS000-A- VVFS000-A- End plate (U)!, Metal joint q, w, O-ring t, y End plate (U)!, Metal joint q, w, O-ring t, y -8-68

13 .70 S OLENOID VALVES S ERIES NVFS H O W T O O R D E R NVFS000 NVFS 0 F P OSITION Position Single Position Double Position Closed Center 4 Position Exhaust Center 5 Position Pressure Center 6 Position Perfect B ODY T YPE 0 Plug-In Type P ORT S IZE - Without Subplate T /4 NPTF 0T /8 NPTF* * Not available for Bottom Ported P ORTING - Side *B Bottom Note) */8 NPTF Only M ANUAL O PTION 0 Standard Std & Direct Manual (Special Order) P ILOT O PERATOR - Internal R External (Special Order) V OLTAGE 00VAC (Special Order) 00VAC (Special Order) 0VAC 4 0VAc 5 4VDC 6 VDC 9 Others (Special Order) E LECTRICAL E NTRY F Through Base M ANUAL O VERRIDE - Non Locking Push Type (Flush) *A Non Locking Push Type (Extended) B Lock Type (Screw Type) *C Lock Type (Lever) Note) * Special Order O PTIONS - None Z With Indicator Light and Surge Voltage Suppressor H O W T O O R D E R M ANIFOLD FOR FURTHER TECHNICAL DETAILS ON THIS PRODUCT, REQUEST CATALOG REFERENCE N

14 S OLENOID VALVES S ERIES NVFS.7 H O W T O O R D E R M ANIFOLD / OPTION P ARTS ASSEMBLY S EE INSIDE FRONT COVER FOR DETAILS OF YOUR LOCAL SALES OFFICE FOR FURTHER TECHNICAL DETAILS ON THIS PRODUCT, REQUEST CATALOG REFERENCE N