1.8 w Port Solenoid Valve Direct Operated Poppet Type. New. Series VT307 CAT.ES11-107A. Power consumption

Transcription

1 Port Solenoid Valve Direct Operated Poppet Type Power consumption Vacuum applications New [Option] RoHS 4 Standard wtype (Existing product: 4.8 W) 0. kpa Energy-saving type.8 w (Existing product: W) A single valve with various valve functions (Universal porting type) N.C. valve Divider valve N.O. valve Selector valve etc Low concentration ozone resistant Rubber seal material: HNBR for main valve Mounting dimensions are interchangeable with existing product 9.5. Body ported type Manifold type Series VT07 CAT.ES-07A

2 Series VT07 Port Solenoid Valve Direct Operated Poppet Type A variety of valve options Continuous duty type Vacuum specification type Energy-saving type Energy-saving type + Vacuum specification type Application examples q Blow-off valve w Pressure release valve e Selector valve r Valve for vacuum (P) (R) (P) (R) X Plug P P (P) (R) Vacuum pump (P) (R) Vacuum pad Vacuum releasing air Atmospheric pressure or micro pressure t Divider valve y Single-acting cylinder drive u Double-acting cylinder drive i Double-acting cylinder drive (Exhaust center) Tank (P) (R) Tank (P) (R) (A) N.C. (P) (R) (P) N.O. (R) N.C. (P) (R) (P) N.C. (R) Port Solenoid Valve, Universal Porting Type Variations Poppet type Direct operated poppet type Pilot poppet type Series New VT07 VT7 VT5 VP00/500/700 Cv (P A) to.6 Refer to the SMC website for details. Features

3 Port Solenoid Valve Direct Operated Poppet Type Series VT07 Rubber Seal RoHS [Option] Note) CE compliant: Electrical entry is applicable only for the DIN terminal. How to Order V T 07 5 G 0 F T O Body type Body ported For manifold Valve option Nil Standard type E Continuous duty type Y Energy-saving type V Vacuum specification type W Energy-saving type, Vacuum specification type Semi-standard Pressure specifications Nil Standard type (0.7 MPa) K High-pressure type ( MPa) Semi-standard Grommet Rated voltage 00 VAC, 50/60 Hz 00 VAC, 50/60 Hz 0 VAC, 50/60 Hz 4 0 VAC, 50/60 Hz 5 4 VDC 6 VDC 7 40 VAC, 50/60 Hz Semi-standard Electrical entry DIN terminal Thread type Nil Rc F G N NPT T NPTF CE-compliant Nil None Q CE-compliant Electrical entry and light/surge voltage suppressor: D/DO/DZ/DOZ only Bracket Nil None F With bracket Port size Nil Without port (For manifold) 0 /8 (6A) 0 /4 (8A) Light/Surge voltage suppressor Nil None With surge voltage suppressor S (Grommet type only) With light/surge voltage suppressor Z (DIN terminal type only) With surge voltage suppressor Surge voltage suppressor G: 00 mm lead wire H: 600 mm lead wire D: With connector JIS Symbol (A) (R) (P) DO: Without connector Manifold Model Applicable manifold type Accessories Function plate (DXT5-4-A) VO07 (-Q) Common or individual exhaust Note) Mounting screw (NXT0-) Note) It is not applicable to the continuous duty type. Refer to the accessories on page 5. Option Description Bracket Part no. DXT5-5-A (With screw)

4 Series VT07 Standard Specifications Make sure that dust and/or other foreign materials do not enter the valve from the unused port (e.g. exhaust port). Flow-rate Characteristics/Weight Type of actuation Fluid Operating pressure range Ambient and fluid temperature Response time Note ) Max. operating frequency Lubrication Mounting orientation Impact/Vibration resistance Note ) Enclosure Electrical entry Coil rated voltage (V) Allowable voltage fluctuation Note ) Note 4) Apparent power AC Note ) Note 4) Power consumption Light/Surge voltage suppressor (DIN terminal type only) Direct operated type position single solenoid Air 0 to MPa (High-pressure type), 0 to 0.7 MPa (Standard type) 0 to 50 C (No freezing) 0 ms or less (at 0.5 MPa) 0 Hz Not required (Use turbine oil Class ISO VG, if lubricated.) Non-locking push type Unrestricted 50/50 m/s Dustproof AC (50/60 Hz) DC Inrush Holding DC AC DC Grommet, DIN terminal 00, 00, 0, 0, 40 4, 5 to +0% of rated voltage.7 VA (50 Hz), 0.7 VA (60 Hz) 7.6 VA (50 Hz), 5.4 VA (60 Hz) Without indicator light: 4 W, With indicator light: 4. W Varistor, LED Diode, LED Semi-standard Note ) Based on dynamic performance test, JIS B (Coil temperature: 0 C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Note ) At rated voltage Note 4) The value is different for continuous duty type (VT07E), and energy-saving type (VT07Y/W). Refer to Valve Options shown below. Valve model Flow-rate characteristics Port (P A) (A R) (R A) (A P) size C[dm /(s bar)] b Cv C[dm /(s bar)] b Cv C[dm /(s bar)] b Cv C[dm /(s bar)] b Cv VT07 VT07V (Vacuum spec. type) VT07E (Continuous duty type) /8 VT07Y (Energy-saving type) VT07W (Energy-saving, Vacuum spec. type) VT07 VT07V (Vacuum spec. type) VT07E (Continuous duty type) /4 VT07Y (Energy-saving type) VT07W (Energy-saving, Vacuum spec. type) Note) Values for a single valve unit. It is not applicable to the manifold. Refer to the manifold specifications on page 5. Weight Grommet 0.5 kg Valve Options Continuous duty type: VT07E Exclusive use of VT07E is recommended for continuous duty with long time loading.. This model is for continuous duty, not for high cycle rates. But even in low cycle rates, if energizing the valve more than once a day, please consult with SMC.. Energizing solenoid should be done at least once in 0 days. Specifications different from standard are as follows. Apparent power/ Inrush 7.9 VA (50 Hz), 6. VA (60 Hz) AC Holding 5.8 VA (50 Hz),.5 VA (60 Hz) Power consumption/dc.8 W, With indicator light: W Response time Note) 0 ms or less (at 0.5 MPa) Note) Refer to Note ) of the standard specifications. Energy-saving type: VT07Y (VT07W) If low power consumption is required for electronic control, VT07Y(W) (.8 W) is recommended. Specifications different from standard are as follows. Power consumption/dc.8 W, With indicator light: W Response time Note) 5 ms or less (at 0.5 MPa) Note) Refer to Note ) of the standard specifications. Vacuum spec. type: VT07V (VT07W) This vacuum model has less air leakage than the standard model under low pressure. It is recommended for vacuum application. Since this valve has slight air leakage, it can not be used for vacuum holding (including positive pressure holding) in the pressure container. Specifications different from standard are as follows. Operating pressure range 0. kpa to 0. MPa

5 Port Solenoid Valve Direct Operated Poppet Type Series VT07 Construction De-energized r Energized t Light/Surge Voltage Suppressor AC In the case of indicator light assembly Terminal no. q r y u q Terminal no. DC In the case of indicator light assembly Coil Terminal no. (+) (Å) w e (Â) Operation principle <De-energized> Poppet valve w is pushed upward by the return spring e, port is closed. Then, port and port are connected. Air flow direction: Port Block, Component Parts No. 4 Description Body Poppet valve Return spring Molded coil How to Use DIN Terminal. Disassembly ) After loosening the screw q, then if the housing w is pulled in the direction of the screw q, the connector will be removed from the body of equipment (solenoid, etc.). ) Pull the screw q out of the housing w. ) On the bottom part of the terminal block e, there s a cut-off part o. If a small flat head screwdriver is inserted between the opening in the bottom, terminal block e will be removed from the housing w. 4) Remove the cable gland r, plain washer t and rubber seal y.. Wiring ) Pass the cable u through the cable gland r, plain washer t and rubber seal y in this order, and then insert them into the housing w. ) Loosen the screw! attached to the terminal block e. Then, pass the lead wire!0 through the terminal block e and tighten the screw! again. Note ) Tighten within the tightening torque of 0.5 N m ±5%. Note ) Cable u outside diameter: ø6 to ø8 mm Note ) Crimped terminal like round-shape or Y-shape cannot be used. Connector for DIN Terminal Description DIN connector Part no. BB09-A (Standard) GM09NJ-B7 (CE-compliant) ( ) (Å) ( ) Material Aluminum die-casted Aluminum, HNBR Stainless steel Resin w e (Â) <Energized> When energizing the molded coil r, the armature t is magnetically attracted to the core y, and through the push rod u, it pushes down the poppet valve w and port is closed. Then, port and port are connected. At this time, there will be gaps between the armature t and the core y, but the armature t will be magnetically firmly attracted to the core y. Air flow direction: Port Port, Port Block Note Color: White. Assembly ) Pass the cable u through the cable gland r, plain washer t and rubber seal y in this order and connect to the terminal block e. Then, mount the terminal block e on the housing w. (Push it down until you hear the click sound.) ) Put the rubber seal y and plain washer t in this order into the cable entry of the housing w, and then tighten the cable gland r securely. ) Insert the gasket i between the bottom part of terminal block e and the plug attached to the equipment. Then, screw in q from the top of the housing w to tighten it. Note ) Tighten within the tightening torque of 0.5 N m ±0%. Note ) Connector orientation can be changed 80 depending on how the housing w and the terminal block e are assembled. e i q w o!!0 y t u r Terminal no. ( ) Electrical Connection DIN terminal is connected inside as in the figure below. Connect to the corresponding power supply. DIN terminal block Voltage 00 VAC 00 VAC DC Others Ground Applicable cable O.D. ø6 to ø8 Terminal no. DIN terminal Lead Wire Color Coil + Color Blue Red Red (+), Black ( ) Gray

6 Series VT07 Dimensions Grommet: VT07- G (Non-locking) x ø4.5 (For mounting) (4.5) (4.5) Note) There is also VT07- H (lead wire length: 600 mm). (Non-locking) Applicable cable O.D. ø6 to ø8 (4) () (7.) x ø4.5 (For mounting) (4.5) (4.5) (8) (7) (4.5) Pg9 Max (4) () (7.) (4.5) (8) (7) G: 00 H: 600 (Lead wire length) (.) 6.5. /4", /8" (Piping port) M4 x 0.7 thread depth 7 (Mounting screw) 5 DIN terminal: VT07- D (.) 6.5. /4", /8" (Piping port) 4 M4 x 0.7 thread depth 7 (Mounting screw) 5

7 Series VT07 Manifold Specifications VT07 manifold is available both as a common exhaust and individual exhaust model. Manifold valve can be easily converted from N.C. (Normally Closed) to N.O. (Normally Open) merely by turning over the function plate. Common exhaust VV F Individual exhaust VV F VV07 VT07 manifold How to Order Manifold Base F Dummy symbol Valve stations 0 stations 0 0 stations Max. 0 stations Specify model number of the manifold base, applicable valves and blanking plates when ordering. Refer to page for the model number of the valves. Ordering example: VV F pc. (5 station manifolds base) VO07-G 4 pcs. DXT060-5-A pc. (Blanking plate) Manifold Specifications Manifold type Max. number of stations Applicable solenoid valve Exhaust port Symbol Type Common Individual P Base (Side) 8 Base (Side) A port size (Base mounted) common exhaust/individual exhaust 4 individual exhaust Exhaust port type Common exhaust Individual exhaust Mounting bracket Thread type Nil F N T Rc G NPT NPTF B mount 0 stations Note) VO07 - (-Q) Port location (Direction)/Port size A R Base (Side) Base (Side) 8 8 Base (Side) Base (Top) 4 8, 4 8 Note) For 6 stations or more, supply air both sides of P port. The common exhaust type should exhaust from both of the R port. Option Description Blanking plate (With gasket, screw) Note) Part no. DXT A B Accessories for Applicable Solenoid Valve Description Part no. Qty. Function plate (With gasket) Note) Mounting screws DXT5-4- A B NXT0- pc. pcs. Note) DXT060-5-B, DXT5-4-B are for the continuous duty type. Flow-rate Characteristics/Weight Flow-rate characteristics Valve model (P A) (A R) (R A) (A P) VO07 VO07V (Vacuum spec. type) VO07E (Continuous duty type) C[dm /(s bar)] 0.4 b 0.8 Cv C[dm /(s bar)] 0.4 b 0. Cv 0.08 C[dm /(s bar)] 0.6 b 0.8 Cv 0.09 C[dm /(s bar)] 0.4 b 0.8 Cv VO07Y (Energy-saving type) VO07W (Energy-saving, Vacuum spec. type) Weight Grommet 0.5 kg 5

8 R P Series VT07 Dimensions: Common Exhaust VV F G: 00 H: (Pitch) P = 6 8 L 9 0 L Max. 0 P R DIN terminal (D, DZ) Applicable cable O.D. ø6 to ø8 Pg9 Grommet (G, H) (Non-locking) For 4 x M4 (For mounting) /8" [(P), (R) port] (Station n) (Station ) (5) A A 40 /8" [ port] (Pitch) P = 6 L Dimension L L L n n: Stations Formula L = 6 x n + 6 L = 6 x n + 0 6

9 Port Solenoid Valve Direct Operated Poppet Type Series VT07 Dimensions: Individual Exhaust VV F (Pitch) P = DIN terminal (D, DZ) 8 7 /8" [(R) port] L Applicable cable O.D. ø6 to ø8 Grommet (G, H) (Pitch) P = 6 (Non-locking) 8.5 For 4 x M4 (For mounting) 4.6 R R P () Pg9 0 /4" [(P) port] 8.5 G: 00 H: L (Station n) (Station ) Max A A /4", /8" [ port] (Pitch) P = 6 L Dimension L L L n n: Stations Formula L = 6 x n + 4 L = 6 x n + 7

10 Series VT07 Specific Product Precautions Be sure to read before handling. Refer to back cover for Safety Instructions and Handling Precautions for SMC Products (M-E0-) for /4/5 Port Solenoid Valve Precautions. Warning Mounting When mounting a valve on the manifold base, N.C. and N.O. can be reversed by the function plate orientation. Also, since the cylinder operates in reverse, confirm if the function plate is correctly mounted or not. N.C. specification N.O. specification Changing from N.C. to N.O. This product is delivered as N.C. valve. If N.O. valve is required, remove mounting screws of the required valve and turn over the function plate. (Make sure that there are gaskets on both sides of the plate.) Then, tighten the mounting screws to fix the valve to the manifold base. Port z Port x Port c Port positions for manifold solenoid valve body Function plate Figure: For N.C. Function plate Specifications N.C. N.O. Function plate No mark NO. Each valve is fixed to the manifold base with two M4 mounting screws. Tighten the screws firmly when re-mounting.. For mounting, tighten M4 or equivalent screws evenly into the mounting holes of the manifold base. Tightening torque of the mounting screw (M4):.4 N m Piping. For the common exhaust type, pressurization or evacuation of the (R) port can cause a malfunction. 8

11 Safety Instructions : Warning: Danger : indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. Warning indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. Danger indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of, Warning or Danger. They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) ), and other safety regulations. ) ISO 444: Pneumatic fluid power General rules relating to systems. ISO 44: Hydraulic fluid power General rules relating to systems. IEC 6004-: Safety of machinery Electrical equipment of machines. (Part : General requirements) ISO 08-: Manipulating industrial robots Safety. etc. Warning. The compatibility of the product is the responsibility of the person who designs the equipment or decides its specifications. Since the product specified here is used under various operating conditions, its compatibility with specific equipment must be decided by the person who designs the equipment or decides its specifications based on necessary analysis and test results. The expected performance and safety assurance of the equipment will be the responsibility of the person who has determined its compatibility with the product. This person should also continuously review all specifications of the product referring to its latest catalog information, with a view to giving due consideration to any possibility of equipment failure when configuring the equipment.. Only personnel with appropriate training should operate machinery and equipment. The product specified here may become unsafe if handled incorrectly. The assembly, operation and maintenance of machines or equipment including our products must be performed by an operator who is appropriately trained and experienced.. Do not service or attempt to remove product and machinery/ equipment until safety is confirmed.. The inspection and maintenance of machinery/equipment should only be performed after measures to prevent falling or runaway of the driven objects have been confirmed.. When the product is to be removed, confirm that the safety measures as mentioned above are implemented and the power from any appropriate source is cut, and read and understand the specific product precautions of all relevant products carefully.. Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction. 4. Contact SMC beforehand and take special consideration of safety measures if the product is to be used in any of the following conditions.. Conditions and environments outside of the given specifications, or use outdoors or in a place exposed to direct sunlight.. Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping, vehicles, military, medical treatment, combustion and recreation, or equipment in contact with food and beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or other applications unsuitable for the standard specifications described in the product catalog.. An application which could have negative effects on people, property, or animals requiring special safety analysis. 4. Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a mechanical protective function, and periodical checks to confirm proper operation.. The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary. If anything is unclear, contact your nearest sales branch. Limited warranty and Disclaimer/ Compliance Requirements The product used is subject to the following Limited warranty and Disclaimer and Compliance Requirements. Read and accept them before using the product. Limited warranty and Disclaimer. The warranty period of the product is year in service or.5 years after the product is delivered, whichever is first. ) Also, the product may have specified durability, running distance or replacement parts. Please consult your nearest sales branch.. For any failure or damage reported within the warranty period which is clearly our responsibility, a replacement product or necessary parts will be provided. This limited warranty applies only to our product independently, and not to any other damage incurred due to the failure of the product.. Prior to using SMC products, please read and understand the warranty terms and disclaimers noted in the specified catalog for the particular products. ) Vacuum pads are excluded from this year warranty. A vacuum pad is a consumable part, so it is warranted for a year after it is delivered. Also, even within the warranty period, the wear of a product due to the use of the vacuum pad or failure due to the deterioration of rubber material are not covered by the limited warranty. Compliance Requirements. The use of SMC products with production equipment for the manufacture of weapons of mass destruction (WMD) or any other weapon is strictly prohibited.. The exports of SMC products or technology from one country to another are governed by the relevant security laws and regulations of the countries involved in the transaction. Prior to the shipment of a SMC product to another country, assure that all local rules governing that export are known and followed. Safety Instructions Be sure to read Handling Precautions for SMC Products (M-E0-) before using. Akihabara UDX 5F, 4-4-, Sotokanda, Chiyoda-ku, Tokyo 0-00, JAPAN Phone: Fax: SMC Corporation All Rights Reserved Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. D-G st printing QW printing QW 850SZ Printed in Japan.