Series SYJ3000/5000/7000

Transcription

1 , ort Solenoid Valve ubber Seal Series SYJ000/000/7000 Low power consumption: 0.W(Without light) (Current draw: 1m at V DC) right color tone and state of the art design SY SYJ SX VK VZ VF VF V7 V Completely interchangenable with the previous series VJ000/000/7000 and VZ000/000 Mounts on the same sub-plates and manifolds as the VJ000/000/7000 and the VZ000/000. SYJ000 SYJ000 SYJ7000 Series VJ VJ000 VJ000 VJ7000 Series VZ VZ000 VZ000 Choice of pilot exhaust styles Standard valve suitable for copper free applications VQ VQ VQZ VQD VZS VFS VS VS7 1.-1

2 , ort Solenoid Valve ubber Seal Series SYJ000/000/7000 Variations Series SYJ000 ort size Effective area mm (Cv) ctuation DC Voltage Electric entry DC Option Light and surge voltage suppressor Manual override ody ported SYJ000 SYJ7000 M X 0.: 0.9(0.0) M X 0.8:.(0.) C: (0.17) C:.(0.19) c(t)1/8: (0.) C: 8.(0.8) C8: 9.9(0.) position Single Double V DC V DC V DC V DC V DC Grommet L plug connector M plug connector With surge voltage suppressor With light and surge voltage suppressor ase mounted SYJ000 SYJ000 SYJ7000 M X 0.8: 1.8(0.1) c(t)1/8:.(0.) position Closed center Exhaust center ressure center C 0V C 1V C 0V C V C Hz Hz Hz Hz (1) C With light and surge voltage suppressor Non-locking push style ush-turnlocking slotted style c(t)1/8, 1/:.(0.7) Note 1) ll C voltage models have built-in surge voltage suppressor. 1.-

3 Series SYJ000/000/7000 Manifold Variations, port size Manifold options Valve series, port location M M c(t) 1/8 With built-in One-touch fitting pplicable tube O.D. ø ø ø8 Individual Individual Interface SU spacer EXH spacer regulator ass'y ass'y Flat cable manifold ody ported SYJ000 SYJ000 SYJ7000 Top SY SYJ SX ase mounted SYJ000 SYJ000 SYJ7000 Side ottom Side ottom Side ottom ody ported, port port ( regulation ) port ( regulation ) Individual SU spacer ass'y 1 Type VK VZ VF VF V7 V VQ VQ port VQZ ase mounted port port VQD VZS, port port Individual EXH spacer ass'y Type VFS VS VS7, port port port 1 Interface regulator Mixed mounting of port valves and, port valves port, ort ort, port port, port port port efer to p.1.-1 for SYJ000, p.1.- for SYJ000 and p.1.- for SYJ

4 Series SYJ000/000/7000 e sure to read before handling. efer to p.0- to 0- for Safety Instructions and common precautions. Warning Operation of Manual Override Use caution since manual override operation will operate any connected actuators. Non-locking push style[standard] ress in the direction of arrow. ush-turn-locking slotted style[d] While pressing, turn in the direction of the arrow. If you do not turn, the mechanism does not lock. Note) second manual override is located on the pilot valve assembly. It is only available as a non-locking push style. Simply depress in the direction of the arrow. Caution Locked position Warning Solenoid Valve with 0V/V C Specifications For grommet or L/M plug connector solenoid valve with C specifications, DC coil is operated with the rectifier circuit built in pilot valve. Do not touch the pilot valve while energizing because the built-in rectifier circuit is heated and the temperature of the surface of pilot valve may be too high. Common Exhaust ort for the ilot and Main Valve ilot air is exhausted through the main valve body rather than directly to atmosphere. Suitable for applications where exhausting the pilot valve to atmosphere would be detrimental to the surrounding working environment. For use in extremely dirty environments where there is the possibility that dust could enter the pilot exhaust and damage the valve. Ensure that the piping of exhaust air is not too restrictive. Caution Series SYJ000/000/7000 and Series SYJ00/00/700 can be mounted on the same manifold. How to mount on the same manifold is shown on the following pages. SYJ000, SYJ SYJ000, SYJ SYJ7000, SYJ In case that or port valve is used as port valve Series SYJ 000, 000, 7000 may be used as a N.C.or N.O. port valve by plugging one of the, ports. e sure not to plug the exhaust ports. Can be used when a double solenoid, port valve is required. USH LOCK recautions lug position Configuration Number of solenoids Single Double port N.C. (JIS Symbols above: Series SYJ000) How to Use lug Connector port N.O. qconnection/discconnection of connector Connection ush the connentor straight onto the pins of the solenoid, making sure the lip of the lever securely "locks" into the groove of the solenoid cover. Disconnection ress the lever against the connector housing and pull it outward from the solenoid. wcrimping connection of lead wire and socket Strip. to.7mm of the lead wire ends, insert each stripped wire into a socket and crimp it using a special crimping tool. e careful that the outer insulation of the lead wires does not interfere with the socket contact part. (Contact SMC for special crimping tools.) Core wire contact area Socket Hook econnection/disconnection of socket with lead wire Connection Insert lead wire and crimped socket into square holes (indicated as positive or negative) of connector. ress the socket in fully until the hook of the socket locks into the groove of the connector housing. Confirm the locked position by lightly pulling on the lead wire. Socket Hook lug lug Caution () (1) () (1) Cover Groove in () 1 () () () 1 () () Connector housing Crimping area Cover Groove in Hook Core Wire Lead wire Insulation lug lug Lever DC indicator Lead wire () (1) () 0. to 0.mm Max cover diameter : ø1.7mm Connector housing Lead wire () 1 () () () (1) 1 () () Socket DXT Disconnection To remove the socket from the connector, pull out lead wire while depressing the hook of the socket with a fine screw driver (or similar). If the socket is to be re-used, reposition the hook again. 1.-

5 Caution lug Connector Lead Wire Length Standard length is 00mm, but the following length is also available. How to Order Connector ssembly For DC: SY0 0 For 0V C: SY0 0 1 For 0V C: SY0 0 For other voltages : of C SY0 0 SY0 0 Without lead wire: (with connector and pcs. of socket) How to Order To order a valve with lead wire length of other than 00mm, indicate part numbers of the valve without connector and the required connector ass'y separately. (Example)00mm lead wire length For DC SYJ1-LO-M SY0-0-- For C SYJ1-1LO-M SY Surge Voltage Suppressor For DC Grommet, L and M plug connector Standard (With polarity) With surge voltage suppressor ( S) ed (+) lack ( ) Caution Diode to prevent reverse connection Coil Indicator light and surge voltage supperssor ( Z) Diode to prevent reverse connection ed (+) Diode Lead wire length mm 00mm 00mm 0mm 00mm 0mm 000mm 000mm Series SYJ000/000/7000 Non polar With surge voltage suppressor ( ) ( )(+) Zener diode (+)( ) Indicator light and surge voltage suppressor ( U) ( )(+) Zener diode (+)( ) lease correctly connect the lead wires to (positive) and (negative) indications on the connector. For non-polar type,the lead wires can be connected to either one. For DC voltages other than, incorrect wiring will cause damage to the surge supperssor circuit. (Wrong polarity will cause trouble). Solenoids, whose lead wires have been pre-wired, are positive side red and negative side black. For C ("S"option is not available since voltage surge is automatically suppressed by the rectifier.) Gromet, L and M plug connentor With light ( Z) Z N Coil Coil Note) In case of using a surge voltage suppressor except for the diode, pay attention to residual voltage in the controller depending on protecting element or rated voltage. In case of diode, the residual voltage is about IV. Coil SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 lack ( ) LED Coil 1.-

6 Series SYJ000/000/7000 recautions e sure to read before handling. efer to p.0- to 0- for Safety Instructions and common precautions. Caution Connector ss'y with rotective Cover Connector ass'y with protective cover enhances dust protection. Effective in preventing possible short circuit problems due to contaminants in contact with connector section. Cover material is chloroprene rubber which has excellent weatherability and electric insulation properties. However be careful not to allow contact with cutting oil. Caution Flat Cable Manifold Type 1 Type SY0 8 How to Order With the flat cable manifold, each valve is wired to the monifold base. single MIL flat cable connects the entire manifold to your power source. This greatly reduces installation time. Lead wire length mm 00mm 00mm 0mm 00mm 0mm 000mm 000mm Connector ss'y with Cover/Dimenions (8) (.) () (0) ed lack (1.) L Gray How to Order Connector ss y with rotective Cover Specify the part numbers of the solenoid valve without connector and the connector ass y with protective cover separately. EX.1) In case of 00mm of lead wire SYJ1-LOZ-M SY0-8-- EX.) In case of 00mm of lead wire (Standard) SYJ1-LZ-M Symbol of connector ass y with protective cover It is not necessary to indicate the part number of connector ass y with protective cover separately in this case. (ø.1) (8) Internal wiring of manifold (+) Common (+) Common Solenoid Solenoid Connected on the printed board st station ( ) Solenoid ( ) Solenoid th station (Max. stations) Solenoid Solenoid st station 7 8 th station rd station Note) Terminal number is not indicated on the connector. The terminal number is indicated on the connection schematic of connector, as show in the reference, means a relation of 1,,... from the triangle mark side on the flat cable of connector. 1st station Coil For more than stations, both poles of the common should be wired. For single solenoid, connect to the solenoid side. The maximum number of stations is. If more than stations are required, consult SMC. Only non-polar valves are available for the flat cable manifold, therefore, either negative COM or positive COM wiring of the manifold is possible. Caution ( ) Solenoid ( ) Solenoid Solenoid Solenoid racket For bracket attached styles of SYJ000 (Single) and SYJ7000, do not use it without bracket. ( ) Solenoid ( ) Solenoid rd station Solenoid Solenoid nd station ( ) Solenoid ( ) Solenoid nd station Triangle mark Solenoid Solenoid 1 ( ) Solenoid ( ) Solenoid 1st station Triangle mark indicated position Note) Connector eference 1 1.-

7 Caution Interface egulator Series SYJ000/000/7000 Flow rate ( ) YJ Condition: Supply pressure 0.7Ma 0. Installing an interface regulator between a valve and the manifold base makes it possible to reduce the supply pressure to that valve without changing the supply pressure of the other stations on the manifold. Specifications Interface regulator YJ000 YJ7000 pplicatable solenoid valve egulating port roof pressure Max. operating pressure Setting pressure range mbient and fluid temperature Thread size for connection of pressure gauge Weight (kg) Effective area at supply side(mm ) () S at 1-0.7Ma, = 0.Ma Effective area at exhaust side (mm ) () S at = 0.Ma E E SYJ000 1.Ma 1.0Ma (1) 0.0 to 0.7Ma () to 0 C M X 0.8 SYJ Note 1) Set the pressure within the operating pressure range of the solenoid valve. Note ) The maximum operating temperature for the valve is 0 C. Note ) The effective area listed is for a single solenoid position valve mounted on a sub-plate. Note ) The interface regulator is only capable of regulating the "" port pressure. Secondary pressure (Ma) YJ Secondary pressure (Ma) Flow rate (l/min(n)) Flow rate (l/min(n)) SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 1.-7

8 , ort Solenoid Valve ubber Seal Series SYJ000 JIS Symbol ort ort (manifold) position sinle ()() 1 ()()() position double ()() 1 ()()() position closed center ()() 1 ()()() position exhaust center ()() position sinle ()() 1 ()() position double ()() 1 ()() ()() 1 ()() position exhaust center ()() 1 ()() position prssure center position prssure center ()() ()() Order Made ()()() 1 ()()().1.-7 ody ported ase mounted position closed center 1 ()() Model port ody ported Valve model port ase mounted (With sub-plate) port ase mounted (For manifold use only) SYJ SYJ SYJ SYJ SYJ SYJ1 SYJ SYJ SYJ SYJ SYJ1 SYJ SYJ SYJ SYJ Specifications Configuration ort size M X 0. M X 0.8 (1) Effective area mm (Cv) 0.9 (0.0) 1.8 (0.1) (1) 1. (0.07) Weight (g) Gromet 7 0 9() 7(7) 7(0) 7 0 ()() L/M plug connector 1 1() 77(1) 80() Note 1) In case of M and mounted on monifold base. Note ) ( ): Without sub-plate. Note ) For DC voltages. For C voltages add 1g to the weight of the single solenoid and g to the weight of the double solenoid and position styles. Fluid ir position single 0.1 to 0.7 Operating pressure range position double (Ma) 0.1 to 0.7 position 0. to 0.7 mbient and fluid temperature C Max. 0 esponse time (ms) () position single, double 1 at 0.Ma position 0 Max. operating frequency (Hz) position single, double position Non-locking push type, ush-turn-locking slotted style ilot exhaust Individual pilot exhaust, Common exhaust (pilot and main valve) Lubrication Not required Mounting position Free Impact/Vibration resistance (m/s ) () /0 rotection structure Dust proof Note ) ccording to dynamic performance test JIS (Coil temperature C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle direction of the main valve and armature, for both energized and de-energized states. (Value in the initial stage) Vibration resistance: No malfunction occurred in a one-sweep test between 8. and 00Hz. Test was performed at both energized and de-energized states to axis and right angle direction of the main valve and armature. (Value in the initial stage) Solenoid Specifications Electrical entry Coil rated voltage (V) llowable voltage ower consumption (W) ( ) pparent power (V) position position position position position position C Surge voltage suppressor Indicator light Can be used for V C in common. Can be used for V C in common. Note ) t rated voltage Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center DC C0/0Hz DC 0V 1V [V] 0V V [V] 1 Grommet(G)/(H), L plug connector(l), M plug connector(m),,,, 0, 1, 0, ±% rated voltage 0. (With light: 0.) 0.9 (With light: 1.0) 1.0 (With light: 1.1) [1.1 (With light: 1.)] 1.8 (With light: 1.9) 1.9 (With light:.0) [. (With light:.)] Diode LED

9 Series SYJ000 racket Mounting qinsert the lower hook of the mounting bracket into the groove on the bottom of the valve as shown. Cylinder Maximum Operating Speed D wress the valve and mounting bracket together until the upper hook of the bracket snaps into place in the groove on top of the valve. Max. operating speed (mm/s) C iping length1m iping length m SY SYJ SX VK VZ VF 0 VF V7 1 0 CJ Cylinder CM Cylinder Cylinder bore size (mm) V System Figure q Solenoid valve Fitting Silencer System Figure w Speed controller Solenoid valve Fitting Silencer Speed controller Fitting ir cylinder ir cylinder VQ VQ VQZ VQD VZS VFS VS VS7 Operating conditions) ressure: 0.Ma, Load rate: 0% t cylinder extended, cylinder stroke CJ: 0mm CM: 00mm System components System Solenoid valve Speed controller Silencer Fitting (Tube O.D. X ort size) Sysytem Figure C D SYJ000 M X 0.8 (S = 1.8mm ) S101F-M-0 S101F-M-0 S1F-01-0 S01F-0 N1-M (S=mm ) ø X M ø X M ø X 1/8 ø X M ø X M q w 1.-9

10 Series SYJ000 How to Order port (For manifold type ) Configuration 1 positon single solenoid positon double solenoid positon closed center positon exhaust center positon pressure center S Z U ated voltage For DC V S V DC V DC V DC V DC V DC Light and surge voltage suppressor Without light and surge suppressor With surge suppressor With light and surge suppressor With surge suppressor (Non-polar) With light and surge suppressor (Non-polar) For C voltage valves "S" option is not available. It is already built into the rectifier circuit. "" and "U" types are available for DC voltage valves. For C ( 0 /0Hz) 1 0V C 0V C 1V C [V C] V C [V C] racket : Without bracket F: With bracket Single Double Note) The double solenoid mounting bracket is supplied unattached. To order the double solenoid bracket for use with a single solenoid valve, order the single solenoid valve without a bracket and order the double solenoid bracket separately. Example) SYJ1-M-M, VJ ody ported SYJ 1 0 M M ase mounted ( port) ase mounted ( port) SYJ 0 M SYJ 0 M (For manifold use only.) port ody option ort size 0: Individual exhaust for the pilot valve : Common exhaust for the pilot and main valves : Non-locking push style : Without sub-plate port Manifold type 1, S1,, S ort, E ort ort, E ort D: ush-turn-locking slotted style (With gasket and screws) M: With M port sub-plate For sub-plate, Manifold type 1, S1,, S Electrical entry,,,, V DC/0, 1, 0, V C Grommet L plug connector M plug connector G: 00mm lead wire L: 00mm lead wire M: 00mm lead wire MN: Without lead wire H: 00mm lead wire LN: Without lead wire MN: Without connector MN: Without connector 1.- LN and MN types are with sockets.

11 Series SYJ000 Construction ()() position single position double ()() 1 ()()() 1 ()()() e t q rw w q t r SY u y u SYJ SX VK position closed center/exhaust center/pressure center position closed center ()() 1 ()()() ()() w t q r position exhaust center VZ VF VF V7 1 ()()() position pressure center ()() u V Component arts No. q w e r Description ody iston plate End cover iston Material Zinc die cast esin esin esin t Spool ss'y How to Order ilot Valve ssembly SY V S 1 G H L LN LO M MN MO 1 ()()() Voltage V DC V DC V DC V DC V DC 0V C0/0Hz 0V C0/0Hz 1V C0/0Hz [V C0/0Hz] V C0/0Hz [V C0/0Hz] G Electrical entry Grommet (Lead wire length: 00mm) Grommet (Lead wire length: 00mm) L plug connector M plug connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector S Z U Note white white white Light and surge voltage suppressor Without light and surge suppressor With surge suppressor With light and surge suppressor With surge suppressor (Non-polar) With light and surge suppressor (Non-polar) For C voltage valves "S" option is not available. It is already built into the rectifier circuit. "" and "U" options are available for DC voltage valves only. (This construction shows a closed center.) eplacement arts No. y u art No. SYJ SY- How to Order Connector ssembly DC 0V C 0V C Description Sub-plate ilot valve Other C voltages Without lead wire (with connector and pcs. of socket) : SY0-0-- : SY : SY0-0-- : SY0-0-- : SY0-0- Lead wire length mm 00mm 00mm 0mm 00mm 0mm 000mm 000mm Note Zinc die cast VQ VQ VQZ VQD VZS VFS VS VS7 1.-

12 Series SYJ000 osition Single G Grommet (G), (H): SYJ1- H -M With bracket. (GZ, GS:.) [.] Depress and turn to operate and lock override. -ø. (Mounting holes) ø1.8 (Mounting holes for manifold) 1.. (GZ, GS:.1) [.1] G: 00 H: [.] [1.] (GZ, GS: 7.1) [8.1] 1 [ ] for C 7 7 -M X 0. (iping port) (racket) 1 [ ] for C Other dimensions are the same as the grommet style. L plug connector (L): SYJ1- L -M M plug connector (M): SYJ1- M -M ø1.8 (Maunting holes for manifold) ø1.8 (Mounting holes for manifold) [.] [.] 9.1 [.] [] 1.- [ ] for C [ ] for C

13 Series SYJ000 osition Double G Grommet (G), (H): SYJ- H -M 77. (GZ, GS: 79.) [79.] Depress and turn to operate and lock override. 7 -ø1.8 (Mounting holes for manifold) SY SYJ SX -ø. equivalent.. 1. racket G: 00 H: [.] VK VZ VF VF V (GZ, GS: 80.) [8.] V 0. [ ] for C L plug connector (L): SYJ- L -M M X 0. (iping port) M plug connector (M): SYJ- M -M 8. VQ VQ VQZ VQD VZS VFS VS VS7 -ø. equivalent. 7. -ø1.8 (Mounting holes for manifold) [.]. 7 -ø. equivalent. -ø1.8 (Mounting holes for manifold) 1. racket 9 8 [.] 9.1 [.] [8] [ ] for C [ ] for C 1.-1

14 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center G 0. (GZ, GS: 1.) [1.] 9. (GZ, GS: 0.) [0.] Grommet (G), (H): SYJ - H -M Depress and turn to operate and lock override. -ø. eauivalent. 7. -ø1.8 (Mounting holes for manifold) 1. racket G: 00 H: [.] (GZ, GS: 9.1) [9.1] 0. (GZ, GS: 1.1) [.1] [ ] for C M X 0. (iping port) L plug connector (L): SYJ - L -M M plug connector (M): SYJ - M -M ø. equivalent. 7. -ø1.8 (Mounting holes for manifold) 1. racket [.] ø. equivalent. -ø1.8 (Mounting holes for manifold).7 1. racket 9 8 [.] 9.1 [.] [9] 0.7 [] 1.-1 [ ] for C [ ] for C

15 Series SYJ000 osition Single Grommet (G), (H): SYJ10- -M G H [8] -ø... (GZ, GS:.) [.]. (GZ, GS:.1) [.1] 1 Depress and turn to operate and lock override. G: 00 H: SY SYJ SX VK VZ VF VF V7 V [ ] for C L plug connector (L): SYJ10- L -M -ø.. -M X 0.8 (iping port) [8]. [9.1] [] M plug connector (M): SYJ10- M -M -ø. VQ VQ VQZ VQD VZS VFS VS VS [8].. -M X 0.8 (iping port) M X 0.8 (iping port) [ ] for C [ ] for C 1.-1

16 Series SYJ000 osition Double Grommet (G), (H): SYJ0- -M G H Depress and turn to operate and lock override -ø.. G: 00 H: (GZ, GS: 79.) [79.] 78.8 (GZ, GS: 80.) [8.] 1. [8]. [ ] for C -M X 0.8 (iping port) 8 L plug connector (L): SYJ0- L -M M plug connector (M): SYJ0- M -M -ø [8] [8] [8]. [9.1] 00 -M X 0.8 (iping port) ø M X 0.8 (iping port) [ ] for C [ ] for C

17 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center G Grommet (G), (H): SYJ 0- -M H 9 [ ] for C L plug connector (L): SYJ 0- L -M ø [8] -M X 0.8 (iping port) Depress and turn to operate and lock override [8] M X 0.8 (iping port) (GZ, GS:.) [.]. (GZ, GS: 7.) [7.] 7. (GZ, GS: 8.1) [9.1] 91.7 (GZ, GS: 9.1) [9.1] G: 00 H: ø [8] M plug connector (M): SYJ 0- M -M -ø.. [9.1] 00 -M X 0.8 (iping port) [9.9] [0.]. 17. SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 [ ] for C [ ] for C 1.-17

18 Series SYJ000 Manifold Standard Manifold Specifications Type 1,S1,S 1,S1,S Manifold style Single base style/ mount (SU)/(EXH)style Common SU, Common EXH Common SU Individual EXH Valve stations to stations, port specifications Location Valve ase Direction Top Side ort size, port M X 0.8 c(t)1/8 : c(t)1/8 : M X 0.8, port M X 0. M X 0.8, C (ø One-touch fitting) ody ported SYJ Effective area (1) ase mounted mm (Cv) SYJ 0.9 (0.0) 0.9 (0.0) 1.(0.07) ase mounted SYJ 1.(0.08) 1.0(0.0) Note 1) Value for a single operation valve mounted on the manifold base. How to Order Valve Manifold Specify the part numbers for the valve(s), blank plate a'ssy and the manifold base. Example SSYJ--0 SYJ1-G-M SYJ pc. (Manifold base) pcs. (Valve) 1 pc. (lank plate ass'y) SSYJ-S1-0-C SYJ10-LZ SYJ pc. (Manifold base) pcs. (Valve) 1 pc. (lank plate ass'y) Use manifold specification sheet. 1.-

19 Series SYJ000 Flat Cable Manifold Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance With the flat cable manifold, each valve is wired to the manifold base. single MIL specification flat cable connects the entrie manifold to the power source. This greaty reduces installation time. Type 1 Type How to Order Valve 1 DC C Configuration position single solenoid position double solenoid position closed center position exhaust center position pressure center SYJ SYJ 1 1 Flat Cable Manifold Specifications/(efer to p.1.-8 for dimensions.) Type Manifold style (SU)/(EXH)style Valve stations, port Location specifications Direction, port ort size, port Effective area (1) SYJ mm (Cv) SYJ 1 Single base style/ mount Common SU/CommonEXH to stations Valve ase Top Side c(t)1/8 M X (0.0) M X 0.8, C (ø One-touch fitting) 1. (0.07) Socket: poles MIL type with strain relief Connector conforms to MIL-C-80 () Internal wiring oth for +COM and COM ated voltage V DC, V DC, 0V C, 1V C Note 1) Value for a single operation of position valve mounted on manifold base. Note ) The withstand voltage specification for the wiring unit section conforms to JIS C070, Grade.or its equivalent. How to Order Valve Manifold SSYJ--07-C 1 pc. (Manifold base) SYJ1-LOU pcs. (Valve) SYJ-LOU pcs. (Valve) Use manifold specification sheet. SYJ SY SY pc. (lank plate ass'y) pcs. (Connector ass'y) pcs. (Connector ass'y) Caution The manifold can be wired for either positive or negative common because only non-polar valves are used. The use of valves other than non polar types are not recommended and may cause damage to the electrical circuit. ated voltage V DC V DC LOU 1 LOZ M / port size ase mounted M X 0. How to Order Connector ss y For V/V DC Single solenoid Double solenoid position For 0V DC Single solenoid Double solenoid position SY SY SY SY For 1V DC (V C) Single solenoid SY Double solenoid position SY SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 1 ated voltage 0V C 1V C (V C) D E Non-locking push style ush-locking slotted style ush-loking kob style Flat cable style: U type is for DC and Z type is for C specification. Contact SMC for other specifications

20 Series SYJ000 Common SU/Common EXH Type ( ort/ody ported) / port M X 0. port M X 0.8 port M X 0.8 Note) For more than stations, supply air to both sides of "" port and exhaust air from both sides of "" port. How to Order SSYJ : Stations stations : stations pplicable solenoid valve SYJ - -M SYJ - -M pplicable blank plate assembly SYJ Type ( ort/ase mounted) 1 Type S1 Type Single solenoid coil is located on same side as the, port. How to Order SSYJ M / port M X 0. port M X 0.8 port M X 0.8 / port M X 0. Type ( ort/ase mounted) / port M X 0.8, C Type S Type Single solenoid coil is located on same side as the, port. port c(t)1/8 port / port c(t)1/8 M X 0.8, C port M X 0.8 port M X 0.8 port c(t)1/8 port c(t)1/8 Valve mounting direction Single solenoid coil is located on opposite side as the, port. Single solenoid coil is S located on same side as the, port. How to Order SSYJ-- Valve mounting direction Single solenoid coil is located on opposite side as the, port. Single solenoid coil is S located on same side as the, port. Stations 0 stations : : stations M Stations 0 stations : : stations, port side M M X 0.8 C ø One-touch fitting pplicable solenoid valve SYJ 0- SYJ - ppilcable blank plate assembly SYJ Type ( ort/ase mounted) port c(t)1/8 / port M X 0.8, C 1 Type S1 Type Single solenoid coil is located on same side as the, port. port c(t)1/8 port c(t)1/8 / port M X 0.8, C How to Order SSYJ-- Valve mounting direction Single solenoid coil is located on opposite side as the, port. Single solenoid coil is S located on same side as the, port. port c(t)1/ C Stations 0 stations : : stations, port side M M X 0.8 C ø One-touch fitting pplicable solenoid valve SYJ 0- SYJ - ppicable blank plate assembly SYJ Common SU/Individual EXH Note) For more than stations, supply air to both sides of "" port. Type ( ort/ase mounted) / port M X 0.8, C Type S Type Single solenoid coil is located on same side as the, port. 1/ port M X 0.8 / port port M X 0.8, C c(t)1/8 How to Order SSYJ-- Valve mounting direction Single solenoid coil is located on opposite side as the, port. Single solenoid coil is S located on same side as the, port. 1/ port M X 0.8 port c(t)1/ M Stations 0 stations : : stations, port side M M X 0.8 C ø One-touch fitting pplicable solenoid valve SYJ 0- SYJ - pplicable blank plate assembly SYJ

21 Series SYJ000 Flat Cable Manifold Common SU/Individual EXH 1 Type Type, port M X 0. port c(t)1/8, port M X 0.8, C port c(t)1/8 port c(t)1/8 port c(t)1/8 Note) For more than stations, supply air to both sides of "" port and exhaust air from both sides of "" port. pplicable valve How to Order efer to the p SSYJ pplicable connector assembly Stations efer to the p stations pplicable blank plate : : assembly stations SYJ (With dust cap) How to Order SSYJ C 0 : Stations stations : stations Installation of the SYJ00 Valves on the SY000 Manifold., port side M M X 0.8 C ø One-touch fitting pplicable valve efer to the p pplicable connector assembly efer to the p pplicable blank plate assembly SYJ (With dust cap) SY SYJ SX VK VZ VF VF V7 V The SYJ000 series valves can be mounted on the manifold for the SYJ000 series. qssyj-, SSYJ-1 The port valve can be used on the port manifold by simply sealing off the unused "" port with plug VJ pplicable solenoid valve SYJ, SYJM SYJ, SYJM wssyj-1, -S1, SSYJ-, -S, SSYJ-, -S, SSYJ- The port valve can be used on the port manifold without modification. The port of the valve will flow out of the port of the manifold. pplicable solenoid valve SYJ1, SYJ1M SYJ, SYJM essyj-1, -S1 The port valve can be used on the port manifold by simply sealing off the unused "" port with plug VJ The port of the valve will flow out of the port of the manifold. pplicable solenoid valve SYJ1, SYJ1M SYJ, SYJM lug (VJ000--1) Seal the unused "" port at the end of the manifold. (SYJ00 port valve) (SYJ00 port valve) lug (VJ000--1) Seal the unused "" port at the end of the manifold. VQ VQ VQZ VQD VZS VFS VS VS7 SSYJ- SSYJ-1 port of the port valve flows out of the manifold port. 1.-1

22 Series SYJ000 Combination of Solenoid Valve, Manifold Gasket and Manifold ase port body ported 0 (SYJ ) Mark pplicable manifold base SSYJ- SSYJ-1 Manifold gasket port base mounted 0 (SYJ ) Mark pplicable manifold base SSYJ-1 SSYJ-S1 SSYJ- SSYJ-S SSYJ- Mark Manifold gasket port base mounted 0 (SYJ ) pplicable manifold base SSYJ-1 SSYJ-S1 SSYJ- SSYJ-S Manifold gasket VJ VJ VJ hillips head screw SY0-- (M1.7 X 17, matted nickel plated) Combination of lank late ss'y and Manifold ase lank plate ass'y SYJ Mark lank plate SYJ Mark lank plate ass'y SYJ hillips head screw SY0- - (M1.7 X 7, matted nickel plated) lank plate SYJ Difference between SYJ and SYJ SYJ 0, ( port) Steel ball is driven in. SYJ 0, ( port) 0 Manifold gasket VJ Manifold gasket VJ pplicable manifold base SSYJ- pplicable manifold base (sub-plate) SSYJ-1 SSYJ-S1 SSYJ- SSYJ-S SSYJ-1 SSYJ-S1 SSYJ- SSYJ-S Note) Manifold gasket "VJ000-1-" can be used with the following manifold bases. SSYJ-1 -S1 - -S Configuration of surface is different. lank plate ass'y SYJ lank plate ass'y SYJ hillips head screw SY0- - (M1.7 X 7, matted nickel plated) lank plate SYJ Mark hillips head screw SY0- - (M1.7 X 7, matted nickel plated) lank plate SYJ Mark Manifold gasket VJ Dust cap SYJ Manifold gasket VJ pplicable manifold base SSYJ- pplicable manifold base SSYJ-1 1.-

23 Series SYJ000 Type Manifold: Top orted/ssyj-- Station Grommet (G), (H) 91.7 (GZ, GS: 9.1) [9.1].9 (GZ, GS:.) [.] ø..9 (GZ, GS:.) [.] 78.8 (GZ, GS: 80.) [8.] G: 00 H: 00 (: Lead wire length) 1 -M X 0.8 (, port) SY SYJ SX VK VZ Depress and turn to operate and lock override (itch) =. 9 L. n-m X 0. (, port) VF VF V7 V [8.] VQ VQ VQZ [ ] for C VQD L plug connector (L) M plug connector (M) VZS VFS [9.] [8.] VS VS [9.9] 79. [8]. [.] [ ] for C Stations L

24 Series SYJ000 1 Type Manifold: Side orted/ssyj-1- Station -M Grommet (G), (H) -M X 0.8 (, port) 91.7 (GZ, GS: 9.1) [9.1]. (GZ, GS:.1) [.1] (GZ, GS:.1) [.1] 78.8 (GZ, GS: 80.) [8.] Depress and turn to operate and lock override. (itch) =. 9 L. -ø. G: 00 H: 00. [0] n-m X 0. (, port) (itch) =.. [ ] for C S1 Type/Side orted Single solenoid coil is located on same side as the, port. L plug connector (L) M plug connector (M) SSYJ-S1- Station -M [9.9] 79. [8] [] 00. [1.1] 91.7 (GZ, GS: 9.1) [9.1]. (GZ, GS:.1) [.1] n-m X 0. (, port) (itch) 9 =. L. (itch) = (GZ, GS:.1) [.1] 78.8 (GZ, GS: 80.) [8.] -ø. Other dimensions are the same as the grommet style. [ ] for C Other dimensions are the same as the grommet style. [ ] for C Other dimensions are the same as style 1. Stations L

25 Series SYJ000 Type Manifold: Side orted/ssyj-- Station -M, C Grommet (G), (H) 91.7 (GZ, GS: 9.1) [9.1]. (GZ, GS:.1) [.1] [] Stations L C(uilt-in One-touch fitting) L plug connector (L) M plug connector (M) SSYJ-S- Station -M, C SSYJ-, S- Station -M Stations L.. Depress and turn to operate and lock override SSYJ-, S- Station -C n-m X 0.8 (, port) [ ] for C (itch) = (GZ, GS:.1) [.1] 78.8 (GZ, GS: 80.) [8.] ø. (With light and surge voltage suppressor).1 (itch) =. L Other dimensions are the same as the grommet style [9.9] 79. [8] 1.7 [] G: 00 H: [.1] 9 7 -c(t)1/8 (, port) [ ] for C Other dimensions are the same as the grommet style (GZ,GS:9.1) [9.1] 1. 1 n-m X 0.8 (, port) (GZ, GS: 9.1) [9.1] 78.8 (GZ, GS: 80.) [8.] 1 n-one-touch fittiing (itch) (, port) =. pplicable tube: T0 S Type/Side orted 7.(GZ,GS:8.1) [9.1] (itch) =. L (itch) 1 = L (GZ, GS: 7.1) [8.1] 78.8 (GZ, GS: 80.) [8.] ø.. n-one-touch fittiing (GZ, GS: 9.1) [0.1] MX.. 1 [ ] for C Other dimensions are the same as the M. Single solenoid coil is located on same side as the, port. C (uilt in One-touch fitting) L. (, port) pplicable tube: T0 [ ] for C Other dimensions are the same as the type. (itch) 1. = SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7

26 Series SYJ000 1 Type Manifold: Side orted/ssyj-1- Station -M, C Grommet (G), (H) C (uilt-in One-touch fitting). -c(t)1/8 ( port) 91.7 (GZ, GS: 9.1) [9.1] 1.9 (GZ, GS:.) [.] 1 9 Depress and turn to operate and lock overrride. -ø. (itch) (Mounting =. 9 holes) L (GZ, GS: 1.) [.] 78.8 (GZ, GS: 80.) [8.] G: 00 H: 00 c(t)1/8 ( port) MX.. 8. [] n-m X 0.8 (, port) (itch) =. 1 n-one-touch fitting (, port) pplicable tube: T0 (itch) =. Other dimensions are the same as the M. [ ] for C S1 Type/Side orted Single solenoid coil is located on same side as the, port. L plug connector (L) M plug connector (M) SSYJ-S1- Station -M, C [9.9] 79. [8] 1 1. [.] [.1] 91.7 (GZ, GS: 9.1) [9.1]. (GZ, GS:.1) [7.1] n-m X 0.8 (, port) (itch) =. L (itch) = (GZ, GS:.1) [.1] 78.8 (GZ, GS: 80.) [8.] -ø. C (uilt-in one-touch fitting) 1 (itch) n-one-touch fitting =. 1 (, port) applicable tube: T0 Other dimensions are the same as the grommet style. [ ] for C Other dimensions are the same as the grommet style. [ ] for C Other dimensions are the same as type 1. Stations L

27 Series SYJ000 Type Manifold: Side orted/ssyj-- Station -M, C Grommet (G), (H) C (uilt-in One-touch fitting) Depress and turn to operature and lock override (GZ, GS: 9.1) [9.1] 0.9 (GZ, GS: 1.) [.] 0 8. [].1 9. n-m X 0.8 (, port) [ ] for C (itch) =.. (itch) =. L (GZ, GS: 0.) [1.] (GZ, GS: 80.) [8.] G: 00 H: 00 L plug connector (L) M plug connector (M) SSYJ-S- Station -M, C ø. (Mounting holes) 9. [9.9] 79. [8] 1 0. [1.] [.1] -c(t)1/8 ( port) (GZ, GS: 9.1) [9.1].9 (GZ, GS:.) [.] 1 n-one-touch fitting (, port) pplicable tube: T (GZ, GS:.) [.] (itch) =.. L -c(t)1/8 ( port) 19 (itch) 1. =. 1. MX. -ø (GZ, GS: 80.) [8.] 1 Other dimensions are the same as the M. S Type/Side orted Single solenoid coil is located on same side as the, port. n-one-touch fitting (, port) pplicable tube: T0 1 SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 n-m X 0.8 (, port) (itch) 1. =. 1.7 (itch) 1. =. 1.7 Other dimensions are the same as the grommet style. [ ] for C Other dimensions are the same as the grommet style. [ ] for C Other dimensions are the same as type. Stations L

28 Series SYJ000 Flat Cable Manifold SSYJ-1- Station L (itch) = ø Depress and turn to operate and lock override. n-m X 0. (, port) -c(t)1/8 (, port) Triangle mark.8 8. Connector polarity indication pplicable connector: -pole MIL type (Conforms to MIL-C-80) 8. SSYJ-- -M, C 9.8 Manual override Depress and turn to operate and lock override. n-m X 0.8 (, port) (itch) = L (itch) = ø.. Triangle mark c(t)1/8 (, port) C(uilt-in One-touch fitting) n-one-touch fitting (, port) pplicable tube: T0 9. Manual override 8..8 (itch) = MX. -c(t)1/8 (, port) 1 Connector polarity indication pplicable connector: -pole MIL type (Conforms to MIL-C-80) Stations L

29 ort Solenoid Valve ubber Seal Series SYJ000 JIS Symbol ody ported position single ()() 1 (1)()() position double ()() 1 (1)()() position closed center ()() 1 (1)()() position exhaust center ()() 1 (1)()() position pressure center Order Made 1.-0 ()() 1 (1)()().1.-7 ody ported ase mounted ase mounted (with sub-plate) position single 1 ()() position double 1 ()() 1 ()() 1 ()() ()() ()() position closed center ()() position exhaust center ()() position pressure center ()() 1 ()() Model ody ported ase mounted Valve model SYJ - -M SYJ - -C SYJ - -C SYJ Configruration Single position Double Closed center Exhaust center position ressure center Single position Double Closed center Exhaust center position ressure center M X 0.8, port : C ø One-touch ( ) fitting, port : M X 0.8 Single position, port Double : C Closed center ø One-touch ( Exhaust center fitting ) position, port ressure center : M X 0.8 Single position Double Closed center c(t)1/8 Exhaust center position ressure center. (0.). (0.). (0.). (0.) [.7 (0.1)], :.0(0.) [.7 (0.1)], 1, :. (0.19) (0.17) (0.17) (0.17) (0.17) [. (0.1)], :.(0.19) [.9 (0.1)], 1, :.1(0.17). (0.19). (0.19).(0.). (0.) [. (0.1)], :.8 (0.1) [.0 (0.17)], 1, :. (0.). (0.). (0.). (0.19). (0.) [.7 (0.1)], :. (0.) [.1 (0.17)], 1, :.0 (0.) Grommet () 9 (8) (9) L/M plug connector () 9 () 7 (7) Note 1) [ ] for normal position. Exhaust center:, 1, ressure center:, Note ) ( ): Without sub-plate. Note ) For DC/C voltages, add 1g to the weight of the single solenoid and g to the weight of the double solenoid and position types. Specifications Fluid Operating pressure range (Ma) mbient and fluid temperature C esponse time (ms) () at 0.Ma Max. operating frequency (Hz) ilot exhaust Lubrication Mounting position Impact/Vibration resistance (m/s ) rotection structure position single position double position position single,double position position single,double posittion Solenoid Specifications Surge voltage suppressor Indicator light 1V C can be used for V C. V C can be used for V C. Note ) t rated voltagem Effective area mm (Cv) (1) Weight (g) ()() ir 0.1 to to to 0.7 Max. 0 0 Non-locking push, ush-turn-locking slotted style Individual pilot exhaust, Common exhaust (pilot and main valve) Not required Free /0 Dust proof Note ) ccording to dynamic performance test JIS (Coil temperature C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle direction of the main valve and armature, for both energized andde-energized states. (Value in the initial stage) Vibration resistance: No malfunction occurred in a one-sweep test between 8. and 00Hz. Test was performedat both energized and de-energized states to axis and right angle direction of the main valve and armature. (Value in the initial stage) Electric entry Coil rated voltage (V) llowable voltage ower consumpution (W) () pparent power (V) DC C0/0Hz C () DC 0V 1V [V] 0V V [V] ort size Grommet (G)/(H), L plug connector (L), M plug connector (M),,,, 0, 1, 0, ±% rated voltage 0. (With light: 0.) 0.9 (With light: 1.0) 1.0 (With light: 1.1) [1.1 (With light: 1.)] 1.8 (With light: 1.9) 1.9 (With light:.0) [. (With light:.)] Diode LED

30 Series SYJ000 Cylinder Maximum Operating Speed Max.operating speed (mm/s) System Figure CM cylinder C1 cylinder Cylinder bore size (mm) Operating conditions: ressure 0.Ma, Load rate 0% t cylinder extended, cylinder stroke CM: 00mm C1: 00mm System components System C C Silencer Solenoid valve SYJ 0-01 c(t)1/8 (S =.mm ) Solenoid valve Fitting S1F01-0 S1F01-0 Speed controller 0 S01F -0 0 D C Speed controller Silencer N1-01 (S = mm ) iping length1m iping lengthm ir cylinder Fitting (Tube O.D. X ort size) ø X 1/8 ø X 1/8 uilt-in Speed Controller Style SYJ uilt-in exhaust flow controls enable simple cylinder speed adjustments. When mounted on the manifold, the common exhaust discharges the pilot and main valve exhaust through a common exhaust port to enable simple exhausting. JIS Symbol (Single) How to order valve with built-in speed controller SYJ Config. ody option ated voltage Electrical entry ort size Light and surge voltage suppressor Flow control specifications( ) Effective area (mm ) 1 Note) 0 1 (Fully closed) late fixing screw 7 (Fully open) When using SYJ model the speed controller must be opend more than 1 complete rotation from fully closed in order to function properly. djust the speed controller with a torque of 0.Nm or less. SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 D 0 S01F ø8 X 1/8 Note) Do not loosen plate fixing screw. 1.-1

31 Series SYJ000 How to Order Configuration 1 position single solenoid position double solenoid position closed center position exhaust center position pressure center Light and surge voltage suppressor For electrical entry G,H,L and M S Z U Without light and surge suppressor With surge suppressor With light and surge suppressor With surge suppressor (Non-polar) With light and surge suppressor (Non-polar) For C voltage valves "S" option is not available. It is already built into the rectifier circuit. "" and "U" types are available for DC voltage valves. racket : Without bracket F : With bracket (For manifold type ) ated voltage For DC V S V DC V DC V DC V DC V DC For C ( 0 /0Hz) 1 0V C 0V C 1V C [V C] V C [V C], port size M C C M X 0.8 ø One-touch fitting ø One-touch fitting Note) The double solenoid mounting bracket is supplied unattached. ody ported SYJ 1 0 L M ase mounted SYJ 0 L ody option 0: Individual exhaust for the pilot valve : Common exhaust for the pilot and main valves : Non-loking push style ort size : Without sub-plate For sub-plate,manifold type0, 1,, port, E port port, E port D: ush-turn-locking slotted style (With gasket and screws) 01: With c(t) 1 /8 sub-plate Electrical entry V, V, V, V, V DC/0V, 1V, 0V, V C Grommet L plug connector M plug connector G: 00mm lead wire L: 00mm lead wire M: 00mm lead wire MN: Without lead wire H: 00mm lead wire LN: Without lead wire LO: Without connector MO: Without connector 1.- LN and MN types are with pcs. of socket.

32 Series SYJ000 Construction position single position double 1 1 e q y t r w w q t r Component arts SY V S 1 No. q w e r t y Description ody iston plate End cover iston Spool ass y Spool spring Material luminum die cast esin esin eain SUS How to Order ilot Valve ssembly G H L LN LO M MN MO Voltage V DC V DC V DC V DC V DC 0V C0/0Hz 0V C0/0Hz 1V C0/0Hz [V C0/0Hz] V C0/0Hz [V C0/0Hz] i 1 1 position closed center/exhaust center/pressure center position closed center 1 position exhaust center 1 position pressure center 1 G Electrical entry Grommet (Lead wire length: 00mm) Grommet (Lead wire length: 00mm) L plug connector M plug connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector t Note White White White q 1 r (This construction shows a closed center) eplacement arts No. w Description Sub-plate ilot valve art No. SYJ SY- How to Order Connector ssembly DC : 0V C : 0V C : Other C voltages: i SY0-0-- SY SY0-0-- SY0-0-- Lead wire length u 00mm 00mm 00mm 0mm 00mm 0mm 000mm 000mm i Note luminum die cast SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 1.-

33 Series SYJ000 osition Single G Grommet (G), (H): SYJ1- -M H G: 00.1 (GZ:.8) [.8] H: 00. With bracket -ø M X 0. (Mounting screw) 19. -ø (GZ, GS:.) [.] Deprees and turn to operate and lock override. -ø. (Mounting holes for mainfold) 9.[] uilt-in One-touch fitting: G C SYJ1- -. H 9.[] C.. (GZ, GS:.1) [7.1] 1 1 -M X 0.8 (iping port) C: () C: (.). -One-touch fitting (, port) pricable tube C: T0 C: T00. [ ] for C [ ] for C Other dimensions are the same as the grommet style. L plug connector (L): SYJ1- L -M M plug connector (M): SYJ1- M -M. 00.[.7] ø. (Mounting holes for manifold) -ø [] ø. (Mounting holes for manifold) 8. -ø. 0.[7.1] [ ] for C Other dimentions are the same as the grommet style. [ ] for C Other dimentionsare the same as the grommet style.

34 Series SYJ000 osition Double Grommet (G), (H): SYJ- -M G H uilt-in One-touch fitting: G C SYJ- - H C Depress and turn to operate and lock override. G: (GZ, GS: 88.) [90.] H: ø. (Mounting holes for manifold). C: () C: (.).. -One-touch fitting (, port) pplicable tube C: T0 C: T00 SY SYJ SX VK VZ -ø. (Mounting holes) [] VF VF V7 8. (GZ, GS: 87.) [87.] V 1 1 -M X 0.8 (ipng port) [ ] for C L pulg connector (L): SYJ- L -M M plug connector (M): SYJ- M -M 87.8[90.] VQ VQ VQZ VQD VZS VFS VS VS7. -ø. (Mounting holes) 19 -ø. (Mounting holes for manifold) []. -ø. (Mounting holes) ø. (Mounting holes for manifold) [7.1] [ ] for C Other dimentions are the same as the grommet style. [ ] for C Other dimentions are the same as the grommet style. 1.-

35 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center Grommet (G), (H): SYJ G - H -M Depress and turn to operate and lock override.. (GZ, GS:.9) [.9] 8. (GZ, GS: 9.) [9.]. (GZ, GS:.) [.] G: 00 H: 00 -ø. (Mounting holes for manifold) uilt-in One-touch fitting: SYJ C - -. C: () C: (.). G H C. -One-touch fitting (, port) pplicable tube C: T0 C: T00. (GZ, GS:.) [.] [] -ø [ ] for C 1 -M X 0.8 (iping port) L plug connector (L): SYJ - L -M M plug connector (M): SYJ - M -M [.].[.8] ø. (Mounting holes for manifold) (.1) [] 19 -ø. (Mounting holes for manifold) [7.1]. -ø. (Mounting holes) ø [ ] for C Other dimentions are the same as the grommet style. [ ] for C Other dimentions are the same as the grommet style.

36 Series SYJ000 osition Single Grommet (G), (H): SYJ G H 17. uilt-in speed controller G SYJ- -01 H MX [ ] for C L plug connector (L): SYJ10- L Depress and turn to operate and lock override. 1. [8] G: 00 H: (Mounting holes pitch).7.8 (GZ, GS:.8) [.8]. (GZ, GS:.) [.] -c(t)1/8 (iping port) -ø. 7. (Mounting holes pitch) 7..7 (Mounting holes pitch) -ø (Mounting holes pitch) M plug connector (M): SYJ10- M ø. 7. (Mounting holes pitch) [.] (Mounting holes pitch) SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS [8] -c(t)1/8 (iping port) [9.1] -c(t)1/8 (iping port) [ ] for C Other dimentions are the same as the grommet style. [ ] for C Other dimentions are the same as the grommet style. 1.-7

37 Series SYJ000 osition Double Grommet (G), (H): SYJ0- H -01 G uilt-in speed controller G SYJ- -01 H MX.1.. -ø.. (GZ, GS:.) [.] 7. (Mounting holes pitch).7.7 G: (GZ, GS: 87.) [87.] H: (GZ, GS: 88.) [90.] (Mounting holes pitch).8 (GZ, GS:.8) [.8] Depress and turn to operate and lock override [8] c(t)1/8 (iping port) [ ] for C L plug connector (L): SYJ0- L -01 M plug connector (M): SYJ0- M (Mounting holes pitch).7 7 -ø..7. -ø. 7. (Mounting holes pitch) [.] 87.8 [90.] 1... [9.1] [8] (Mounting holes pitch) (Mounting holes pitch) 1 -c(t)1/8 (iping port) c(t)1/8 (iping port) [ ] for C [ ] for C

38 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center Grommet (G), (H): SYJ G H uilt-in speed controller SYJ G H MX.1.. SY (Mounting holes pitch) -ø. 9 (GZ, GS: 9.7) [0.7] (Mounting holes) Depress and turn to operate and lock override. 7. (Mounting holes pitch). 1. (GZ, GS:.) [.]. (GZ, GS:.) [.].1 8. (GZ, GS: 9.) [9.] G: 00 H: SYJ SX VK VZ VF VF V [8] V 1 [ ] for C L plug connector (L): SYJ 0- L -01 (Mounting holes pitch) -ø. -c(t)1/8 (iping port) 7. (Mounting holes pitch) M plug connector (M): SYJ 0- M [8] (Mounting holes pitch) 00 -ø. 7. (Mounting holes pitch) [0.].8 [.] 1... [9.1] VQ VQ VQZ VQD VZS VFS VS VS7 1 -c(t)1/8 (iping port) c(t)1/8 (iping port) 8. [ ] for C [ ] for C 1.-9

39 Series SYJ000 Manifold Standard Manifold Specifications Type 0 1 Manifold style (SU), (EXH) style Single base style/ mount Common SU, Common EXH Valve stations, port specifications ort size Valve effective area mm (Cv) (1) Location Direction, port, port ody ported SYJ ase mounted SYJ Valve Top M X 0.8 C C M:. (0.19) C: (0.17) C:. (0.19) ase ottom c(t)1/8 to stations M X 0.8 Note 1) Value for a solenoid position valve mounted on the manifold base. ase Side c(t)1/ c(t)1/8, C (ø One-touch fitting) c(t)1/8 C (ø Onetouch fitting).0 (0.17).9 (0.1).8 (0.1). (0.) How to Order Valve Manifold Specify the part numbers for the valve(s), blank plate ass'y, and manifold base. Example SSYJ--0 1 pc. (Manifold base) SYJ1-G-M pcs. (Valve) SYJ pc. (lank plate ass'y) Use manifold specification sheet. SSYJ--0-C 1 pc. (Manifold base) SYJ10-LZ 1 pc. (Valve) SYJ0-LZ 1 pc. (Valve) SYJ pc. (lank plate ass'y) 1.-0

40 Series SYJ000 Flat Cable Manifold Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance With the flat cable manifold, each valve is wired to the manifold base. single MIL specification flat cable connects the entire manifold to the power source. This greatly reduces installation time. How to Order Valve 1 DC C SYJ Configuration position single solenoid position double solenoid position closed center position exhaust center position pressure center D E 1 SYJ 1 1 ated voltage 0V C 1V C (V C) Non-locking push style ush-turn-locking slotted style ush-turn-looking knob style Flat Cable Manifold Specifications Model 1 Manifold style Single base style/ mount (SU), (EXH) style Common SU, Common EXH Valve stations to stations, port specifications Location Direction, port Valve Top c(t)1/8 ase Side c(t)1/8 ort size M X 0.8, port C (ø One-touch fitting) C (ø One-touch fitting) M X 0.8 C (ø One-touch fitting) ody ported M:. (0.19) C: (0.17) SYJ C:. (0.19) Valve effective area mm (Cv) (1) Connector () Internal wiring ated voltage ase mounted SYJ Socket: poles MIL type with strain relief conforms to MIL-C-80 oth for +COM and COM V DC, V DC, 0V C, 1V C Note 1) Value fo single operation of position valve mounted on manifold base. Note ) The withstand voltage specification for the wiring unit section conforms to JISC070, Grade 1 or its equivalent. How to Order Valve Manifold Use manifold specifications sheet. SSYJ-1-07-C 1 pc..9 (0.1) Specify the part numbers for the valve(s), blank plate ass'y, and manifold base. Example (Manifold base) SYJ1-LOU pcs. (Valve) SYJ-LOU pcs. (Valve) SYJ pc. (lank plate ass'y) SY pcs. (Connector ass'y) SY pcs. (Connector ass'y). (0.) Caution The manifold can be wired for either positive or negative common because only non-polar valves are used. The use of valves other than non polar types are not recommended. It may cause damage to the electrical circuit. ated voltage V DC V DC LOU 1 LOZ / port size ase mounted M M X 0.8 C ø One-touch fitting C ø One-touch fitting Note) Flat cable style: "U" type is for DC and "Z" type is for C specification. Contact SMC for other specifications. How to Order Connector ss'y For V/V DC Single solenoid Double solenoid position Single with interface ass'y Double solenoid position with inter face ass'y For 0V DC Single solenoid Double solenoid position Single with interface ass'y Double solenoid position with inter face ass'y SY SY SY SY SY SY SY SY For 1V DC (V C) Single solenoid SY Double solenoid SY position Single SY with interface ass'y Double solenoid position SY wth inter face ass'y 1.-1 SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7

41 Series SYJ000 Common SU/Common EXH Type ( ort/ody ported), port M X 0.8 port c(t) 1 8 port c(t) 1 8 Note) For more than 8 stations, supply air to both sides of "" port and exhaust air from both "" port. How to Order SSYJ Stations 0 stations : : stations pplicable solenoid valve SYJ - - SYJ - - M C C M C C pplicable blank plate assembly SYJ pplicable individual exhaust spacer assembly SYJ Type ( ort/ase mounted) How to Order pplicable solenoid valve SYJ 0- SSYJ M SYJ - port SYJ 0- c(t) 1 8 Stations SYJ - 0 stations pplicable blank plate assembly : : SYJ stations port pplicable individual, port c(t) 1 8 exhaust spacer assembly, port side M X 0.8 SYJ M M X 0.8 pplicable interface regulator assembly YJ Type ( ort/ase mounted), port M X 0.8 port c(t) 1 8 port c(t) 1 8 Type ( ort/ase mounted ) How to Order How to Order Stations 0 stations : : stations, port side M M X 0.8 Stations 0 stations port : : c(t) 1 stations, port, port side c(t) 1 8, C port c(t) 1 01 c(t) 1 8 C ø One-touch fitting Type ( ort/ase mounted) How to Order SSYJ M SSYJ C SSYJ C pplicable solenoid valve SYJ 0- SYJ - SYJ 0- SYJ - pplicable blank plate assembly SYJ pplicable individual exhaust spacer assembly SYJ pplicable individual supply spacer assembly SYJ pplicable interface regulator assembly YJ , port C port c(t) 1 8 port c(t) 1 8 Stations 0 stations : : stations, port side C ø One-touch fitting 1.-

42 Series SYJ000 Flat Cable Manifold Common SU/Common EXH Type ( ort/ody ported), port 1 Type ( ort/ase mounted) Type ( ort/ase mounted) Note) For more than 8 stations, supply air to both sides of "" port and exhaust air from both sides of "" port. How to Order Stations 0 stations : : stations How to Order SSYJ M 0 : Stations stations : stations Combinations of Solenoid Valve, Manifold Gasket and Manifold ase hillips head screw M. X, matted nickel plated (With spring washer) lank late ssembly SYJ hillips head screw M. X 7, matted nickel plated (With spring washer) lank plate SYJ port c(t) 1 8 port c(t) 1 8, port M X 0.8 port c(t) 1 8 port c(t) 1 8, port C port c(t) 1 8 port c(t) 1 8 Gasket DXT19--9 pplicable manifold base SSYJ- SSYJ How to Order SSYJ C SYJ : Stations stations : stations Gasket DXT19-- pplicable manifold base Sub-plate SSYJ-0 SSYJ-1 SSYJ- SSYJ- hillips head screw M. X 7, Matted nickel plated (With spring washer) lank plate SYJ pplicable solenoid valve efer to the p pplicable blank plate assembly SYJ pplicable connector assembly efer to the p pplicable solenoid valve efer to the p pplicable blank plate assembly SYJ pplicable connector assembly efer to the p SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 Gasket DXT19-- Gasket DXT19-- pplicable manifold base SSYJ- Dust cap SSYJ-0 SY SSYJ-1 SSYJ- SSYJ- pplicable manifold base SSYJ- SSYJ-1 SSYJ- 1.-

43 Series SYJ000 Installation of the SYJ00 Valve on the SYJ000 Manifold Use of an adapter plate makes it possible to mount series SYJ00 on the manifold bases of series SYJ000. When mounting the SYJ00 valve on the SYJ000 manifold, the SYJ00 solenoid must be positioned on the same side of the manifold as a single solenoid SYJ000. (See the figure below.) For base mounted style, the port of the port valve flows out the port of manifold base. dapter plate ass'y SYJ00--1 Series SYJ00 ody ported dapter plate ass'y SYJ00--1 Series SYJ00 ase mounted dapter plate ass'y SYJ00--1 Interface egulator ( regulation) utting interface regulator on the manifold base makes it possible to reduce supply pressure to a valve individually. YJ hillips screw M. X, matted nickel plated (With spring washer) ase mounted Manifold gasket DXT0-9-1 hillips screw M. X 9, matted nickel plated (With spring washer) dapter plate SYJ00--1 dapter gasket DXT0--1 pplicable manifold base SSYJ- pplicable manifold base SSYJ-0 SSYJ-1 SSYJ- SSYJ- Gasket DXT19-- efer to p.1.-7 prior to handling. pplicable manifold base SSYJ-0 SSYJ-1 SSYJ- SSYJ- Individual EXH Spacer ss'y Individual SU Spacer ss'y SYJ SYJ M. Spring washer M. Spring washer hillips screw M. X, matted nickel plated ody orted ase mounted hillips screw M. X 0., matted nickel plated ase mounted -M X 0.8 (1, port) 1 Gasket DXT19-- Individual EXH spacer ass'y SYJ pplicable mainfold base SSYJ- SSYJ-0 SSYJ-1 SSYJ- SSYJ- c(t)1/8 ( port) Gasket DXT19-- Individual SU spacer ass'y SYJ pplicable manifold base SSYJ-1 SSYJ- SSYJ- 1.-

44 Series SYJ000 Type Manifold: Top orted/ssyj-- Station Grommet (G), (H). (GZ, GS:.) [.]. (GZ, GS:.) [7.] L (itch) = ø (GZ, GS: 7.8) [8.8].1 (GZ, GS :.8) [1.8] n-m X 0.8 (, port) G: 00 H: 00 Depress and turn to operate and lock override c(t)1/8 (, port) uilt-in One-touch fitting SY SYJ SX VK VZ VF VF 0 [.] One-touch fitting (, port) pplicable tube C: T0 C: T00 C: () C: (.).8 V7 V VQ VQ VQZ [ ] for C VQD L plug connector (L) M plug connector (M) VZS VFS VS VS [.] 87.8 [90.] 9 [70.] 7. 0 [.] [7.] [ ] for C Other dimensions are the same as the grommet style. [ ] for C Other dimensions are the same as the grommet style. Stations L

45 Series SYJ000 0 Type Manifold: ottom orted/ssyj-0- Station -M Grommet (G), (H). (GZ, GS:.) [.]. (GZ, GS:.9) [.9] L (itch) = ø (GZ, GS:.) [.] 87. (GZ, GS: 88.) [90.] G: 00 H: 00 Depress and turn to operate and lock override c(t)1/8 (, port) 0 [.] 7. 1 uilt-in speed controller n-m X 0.8 (, port).. (itch) =1 MX: 1. [ ] for C L plug connector (L) M plug connector (M) [.] 87.8 [90.] 9 [70.] [7.] 0 [.] [ ] for C Other dimentions are the same as the grommet style. [ ] for C Other dimentions are the same as the grommet style. Stations L

46 Series SYJ000 1 Type Manifold: Side orted/ssyj-1- Station -M Grommet (G), (H) [ ] for C. (GZ, GS:.) [.] (GZ, GS:.7) [.7] L plug connector (L) 9..1 [0.] n-m X 0.8 (, port) 9. L =1 (itch) (itch) = Depress and turn to operate and lock override -ø (GZ, GS: 0.) [1.] 7. (GZ, GS: 8.) [9.] G: 00 H: 00 MX: 1. M plug connector (M) [.] 87.8 [90.] -c(t)1/8 (, port) uilt-in speed controller [.8] SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS [0.] 00.1 [71.] [ ] for C [ ] for C Stations L

47 Series SYJ000 Type Manifold: Side orted/ssyj-- Station -01,C Grommet (G), (H). (GZ, GS:.) [.] [9.] 8 (GZ, GS: 8.7) [9.7] [ ] for C L n-c(t)1/8 (, port) =17 (itch) 1.7. (GZ, GS:.) [.].7. (GZ, GS:.) [.] G: 00 H: 00 (itch) = Depress and turn to operate and lock override -ø c(t) 1 (, port) uilt-in speed controller.. MX: 1. G: 00 C (uilt-in One-touch fitting) G: 00 [9.] 0. [ ] for C L plug connector (L) M plug connector (M) n-one-touch fitting (, port) pplicable tube: T00 MX.. -c(t)1/ (, port) (itch) = [.] 87.8 [90.] [7.8] 0. [9.] [80.] [ ] for C [ ] for C, port size Station c(t) 1/8 L C(ø Onetouch fitting) L

48 Series SYJ000 Type Manifold: Side orted/ssyj-- Station -C Grommet (G), (H) Depress and turn to operate and lock override -ø. [ ] for C L plug connector (L) 7 0..(GZ, GS:.)[.] 0.(GZ, GS: 1.)[.] [0.] 1. L n-one-touch fitting (, port) pplicable tube: T0 7 =1 (itch) 1.7 (itch) = (GZ, GS:.8) [.8].1 (GZ, GS:.8) [.8] G: 00 H: 00 MX: 1. M plug connector (M).8 [.] [90.] MX. -c(t)1/8 (, port) uilt-in speed controller.1 [71.] 7. [.] SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS [0.] 00 [ ] for C [ ] for C Stations L

49 Series SYJ000 Flat Cable Manifold SSYJ-- Station Depress and turn to operate and lock override n-m X 0.8 (, port) Manual L 9 Side (itch)=17. -ø c(t)1/8 (, port) 9 C, C (uilt-in One-touch fitting) -One-touch fitting (, port) pplicable tube C: T0 C: T00 1 Triangle mark C: () C: (.).8 Side 0 olarity indication pplicable connector: -pole MIL type (Conforms to MIL-C-80) Stations L SSYJ-1- Station -M n-m X 0.8 (, port) (itch) =17... Manual L 7. Side uilt-in speed controller (itch) = MX: ø. Triangle mark Side -c(t)1/8 (, port) 7. 9 olarity indication pplicable connector: -pole MIL type (Conforms to MIL-C-80) Station L

50 Series SYJ000 Flat Cable Manifold SSYJ-- Station -C n-one-touch fitting (, port) pplicable tube: T0 (itch) =17.. L 7. Side uilt-in speed controller SY SYJ (itch) = MX. 7. MX: 1. SX VK VZ -ø. Deperess and turn to operate and lock override. Triangle mark Side 1 -c(t)1/8 (, port) VF VF V7 V 7. 9 olarity indication pplicatable connector: -pole MIL (Conforms to MIL-C-80) Stations L VQ VQ VQZ VQD VZS VFS VS VS7 1.-1

51 ort Solenoid Valve ubber Seal Series SYJ7000 JIS Symbol ody ported position single ()() 1 (1)()() position double ()() 1 (1)()() position closed center ()() 1 (1)()() position exhaust center ()() 1 (1)()() position pressure center ()() 1 (1)()() 1.- ody ported ase mounted ase mounted position single solenoid ()() 1 ()()(1) position double solenoid ()() 1 ()()(1) position closed center ()() 1 ()()(1) position exhaust center ()() 1 ()()(1) position pressure center ()() 1 ()()(1) Model ody ported ase mounted Fluid Valve model Configuration ort size SYJ SYJ7 - -C SYJ7 - -C8 SYJ Specifications Operating pressure range (Ma) position position position position position position position position Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center position mbient and fluid temperature( C) esponse time (ms) at 0.Ma () Max.operating frequency (Hz) position single position double position single, double position position single, double position ilot exhaust Lubrication Mounting orientation Impact/Vibration resistance (m/s ) () rotection structure Solenoid Specifications Electrical entry Coil reted voltage (V) llowable voltage ower consumption (W)() pparent power (V) DC C0/0Hz C DC 0V 1V [V] 0V V [V] Surge voltage suppressor Indicator light Can be used for V C in common. Can be used for V C in common. Note ) t rated voltage c(t)1/8, port : C ø One-touch ( ) fitting, port : c(t)1/8, port : C8 ø8one-touch ( ) fitting, port : c(t)1/8 c(t)1/8 c(t)1/ Effective area mm (Cv) (0.) (0.) 8. (0.7) 9 (0.) [. (0.)], : 1. (0.7) [7 (0.9)], 1, : 7 (0.9) 8. (0.8) 8. (0.8) 7.1 (0.9) 8. (0.7) [. (0.)], : 7.7 (0.) [. (0.)], 1, : 7.1 (0.9) 9.9 (0.) 9.9 (0.) 8. (0.) 9.7 (0.) [.7 (0.7)], : 9. (0.) [. (0.)], 1, : 7. (0.). (0.7). (0.7) 8. (0.7) 9 (0.) [. (0.)], : 1. (0.7) [7 (0.9)], 1, : 7 (0.9) Weight (g) (1) ()() Grommet (8) 17 (9) () L / M plug connector (8) 17 (9) () Note 1) In case of M and mounted on monifold base. Note ) ( ): Without sub-plate. Note ) For DC voltages. For C voltages add 1g to the weight of the single solenoid and g to the weight of the double solenoid and position types. ir 0.1 to to to 0.7 Max Non-locking push, ush-turn-locking slotted style Individual pilot exhaust, Common exhaust (pilot and main valve) Not required Universal /0 Dust proof Note ) ccording to dynamic performance test JIS (Coil temperature C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle direction of the main valve and armature, for both energized and de-energized states. (Value in the initial stage) Vibration resistance: No malfunction occurred in a one-sweep test between 8. and 00Hz. Test was performed at both energized and de-energized states to axis and right angle direction of the main valve and armature. (Value in the initial stage) Grommet (G)/(H), L plug connector (L), M plug connector (M),,,, 0, 1, 0, % rated voltage 0. (With light: 0.) 0.9 (With light: 1.0) 1.0 (With light: 1.1) [1.1 (With light: 1.)] 1.8 (With light: 1.9) 1.9 (With light:.0) [. (With light:.)] Diode LED

52 Series SYJ7000 Cylinder Maximum Operating Speed 00 E Max.operating speed (mm/s) D C iping length 1m iping length m CM cylinder C1 cylinder Cylinder bore size (mm) SY SYJ SX VK VZ VF VF V7 V System Figure Solenoid valve VQ Silencer Fitting ir cylinder VQ VQZ VQD Speed controller VZS System Figure Solenoid valve Fitting Fitting ir cylinder VFS VS VS7 Silencer Speed controller Operating conditions: ressure 0.Ma, Load rate 0% t cylinder extended, cylinder storoke CM: 00mm C1: 00mm System components System Solenoid valve C D SYJ c(t)1/8 (S =.mm ) SYJ7 0-0 c(t)1/ (S =.mm ) Speed controller Silencer Fitting (Tube O.D. X ort size) System figure S1F S01F- 0-0 N1-01 ø X 1/8 (S = mm ) ø X 1/ 0 S01F S01F- 0- N0-0 (S = mm ) ø8 X 1/ ø X 1/ q E S001F- ø X 1/ ø X 1/ w 1.-

53 Series SYJ7000 How to Order Configuration 1 position single solenoid position double solenoid position closed center position exhaust center position pressure center Light and surge voltage suppressor S Z U Without light and surge suppressor With surge suppressor With light and surge suppressor With surge suppressor (Non-polar) With light and surge suppressor (Non-polar) For C voltage valves "S" option is not available. It is already built into the rectifier circuit. "" and "U" types are available for DC voltage valves. racket : Without bracket F: With bracket ated voltage (For manifold type, 1) For DC V S V DC V DC V DC V DC V DC For C ( 0 /0Hz) 1 0V C 0V C 1V C[V C] V C[V C] / port size 01 C C8 c(t)1/8 ø One-touch fitting ø8 One-touch fitting Note)Do not remove the factory installed bracket from models with the bracket option. emoval of the bracket will cause the valve to leak. ody ported SYJ7 1 0 M 01 ase mounted SYJ7 0 M ody option 0: Individual exhaust for the pilot valve : Common exhaust for the pilot and main valve : Non-locking push style ort size : Without sub-plate For sub-plate, manifold type 0, 1, port, E port port, E port D: ush-turn-locking slotted style (With gasket and screws) 01: With c(t) 1 /8 sub-plate Note) Electrical entry V, V, V, V, V DC/0V, 1V, 0V, V C Grommet L plug connector M plug connector G: 00mm lead wire L: 00mm lead wire M: 00mm lead wire MN: Without lead wire 0: With c(t) 1 / sub-plate Note) 1and port size c(t)1/ H: 00mm lead wire LN: Without lead wire LO: Without connector MO: Without connector 1.- LN and MN types are with pcs. of socket.

54 Series SYJ7000 Construction ()() position single position double ()() ey q 1 1 (1) () () (1) () () t r w w q t r i 1 position closed center/exhaust center/pressure center position closed center ()() 1 (1) () () position exhaust center ()() 1 (1) () () position pressure center ()() t q r w 1 i u i SY SYJ SX VK VZ VF VF V7 V Component arts No. q w e r t y How to Order ilot Valve ssembly SY V S 1 G H L LN LO M MN MO (1) 1 () () Description ody iston plate End cover iston Spool ass, y Spool spring Voltage V DC V DC V DC V DC V DC 0V C0/0Hz 0V C0/0Hz 1V C0/0Hz [V C0/0Hz] V C0/0Hz [V C0/0Hz] G Electrical entry Grommet (Lead wire length: 00mm) Grommet (Lead wire length: 00mm) L plug connector M plug connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Material luminum die cast esin luminum die cast esin SUS 1 Note white white white eplacement arts No. u i Description Sub-plate ilot valve (This construction shows a closed center.) arts No. SYJ SYJ SY- How to Order Connector ssembly DC: 0V C: 0V C: Other C voltages Without lead wire (with connector and pcs. of socket) Light and surge voltage suppressor S Z U Without light and surge suppressor With surge suppressor With light and surge suppressor With surge suppressor (Non-polar) With light and surge suppressor (Non-polar) For C voltage valves "S" option is not available. It is already built into the rectifier circuit. "" and "U" options are available for DC voltage valves only. : SY0-0-- : SY : SY0-0-- : SY0-0-- : SY Lead wire length 00mm 00mm 00mm 0mm 00mm 0mm 000mm 000mm Note c1/8 luminum c1/ die cast 1.- VQ VQ VQZ VQD VZS VFS VS VS7

55 Series SYJ7000 osition Single Grommet (G), (H): SYJ G H Depress and turn to operate and lock override. With bracket -ø. (Mounting holes) ø. (Mounting holes for manifold ) -ø (GZ, GS: 8.) [8.] G: 00 H: 00 [0.] (racket) [0.]. 8. (GZ, GS: 8.) [87.] (GZ, GS: 8.7) [8.7] uilt-in One-touch fitting: G C SYJ71- - H C8 1. -c(t)1/8 (iping port) 1 7. (.9) 17 -One-touch fitting (, port) pplicable tube C: T00 C8: T080 [ ] For C L plug connector(l): SYJ71- L -01 [ ] for C Other dimensions are the same as the grommet style. M plug connector (M): SYJ71- M [8.] ø. (Mounting holes for maniford) -ø [0.] ( Mounting holes for manifold ) -ø [1.] 1 -ø [ ] for C [ ] for C

56 Series SYJ7000 osition Double G Grommet (G), (H): SYJ H uilt-in One-touch fitting G C SYJ7- - H C8 -ø..8 (GZ, GS: 7.8) [7.8] (Mounting holes for manifold) Depress and turn to operate and lock override (.9) 17 -One-touch fitting (, port) pplicable tube C: T00 C8: T080 SY SYJ SX -ø. VK VZ (GZ, GS: 8.8) [1.8] [0.] VF VF V7 V [ ] for C c(t)1/8 (iping port) L plug connector(l): SYJ7- L -01 M plug connector (M):SYJ7- M [1.] 0 1 -ø ø. (Mounting holes for manifold) -ø [0.] [0.] 1 -ø. (Mounting hole for manifold) VQ VQ VQZ VQD VZS VFS VS VS [ ] for C [ ] for C 1.-7

57 Series SYJ7000 osition Closed Center/Exhaust Center/ressure Center Grommet (G), (H): SYJ G H uilt-in One-touch fitting: SYJ7 G C - - H C ø. (Mounting holes for manifold) 1..7 (GZ, GS:.7) [.7] (.9) 17 -One-touch fitting (, port) pplicable tube C: T00 C8: T080 Depress and turn to operate and lock override 1. (GZ, GS:.) [.] -ø. G: 00 H: (GZ, GS:.) (GZ, GS:.) [.] [0.] 7. -c(t)1/8 (iping port) [ ] for C L plug connecter (L): SYJ7 -llll-01 M plug connector (M): SYJ7 - M ø. (Mounting holes for manifold) 17 -ø. (Mounting holes for manifold) [.1]. [.] -ø [0.] 1.1 -ø [1.] [ ] for C [ ] for C

58 Series SYJ7000 osition Single G Grommet (G), (H): SYJ H Depress and turn to operate and lock override G: (GZ, GS: 8.) [8.] H: (GZ, GS: 8.9) [87.9] -ø. 7 -c(t)1/, 1/8 (,, port) SY SYJ SX VK VZ VF VF V7 V [ ] for C L plug connector (L): SYJ [.] c(t)1/ (1, port) -ø M plug connector (M): SYJ710- M ø. 7 VQ VQ VQZ VQD VZS VFS VS VS c(t)1/, 1/8 (,, port) [8.8] -c(t)1/, 1/8 (,, port) [.] [77.] c(t)1/ (1, port) 1. -c(t)1/ (1, port) 1. [ ] for C [ ] for C 1.-9

59 Series SYJ7000 osition Double G H Grommet (G), (H): SYJ [.] 7.1 Depress and turn to operate and lock override -ø. 8.. (GZ, GS:.9) [.9] 7 1 G: 00 H: (GZ, GS:.) [.].8 (GZ, GS: 7.8) [7.8] 7. (GZ, GS: 8.8) [1.8] -c(t)1/, 1/8 (,, port) -c(t)1/ (1, port) [ ] for C L plug connector (L): SYJ70- L ø. 8. M plug connector (M): SYJ70- M ø [.] c(t)1/, 1/8 (,, port) [77.] [1.] 1. -c(t)1/, 1/8 (,, port) c(t)1/ (1, port) -c(t)1/ (1, port) 1.-0 [ ] for C [ ] for C

60 Series SYJ7000 osition Closed Center/Exhaust Center/ressure Center Grommet(G), (H): SYJ G 01 H 0. [ ] for C [.] L plug connector (L): SYJ7 0- L - 00 Depress and turn to operate and lock override G: 00 H: 00 -ø c(t)1/,1/8 (,, port) 7.1 -ø. 8. (GZ, GS:.7) [7.7] (GZ, GS:.) [.] 1. (GZ, GS:.) [.] (GZ, GS:.) [.] -c(t)1/,1/8 (,, port) c(t)1/ (1, port) M plug connector (M): SYJ7 0- M [.] [77.] [.] [7.] c(t)1/,1/8 (,, port) ø. SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 -c(t)1/ (1, port) -c(t)1/ (1, port) [ ] for C [ ] for C 1.-1

61 Series SYJ7000 Manifold Standard Manifold Specifications Type Manifold style (SU), (EXH) style Valve stations, port specifications ort size Valve effective area mm (Cv) (1) Location Direction, port, port ody ported SYJ7 ase mounted SYJ to 1 stations c(t)1/8 Valve Top c(t)1/8 C (ø One-touch fitting) C8 (ø8 One-touch fitting) c(t)1/8: (0.) C: 8. (0.8) C8: 9.9 (0.) Single base style/ mount Common SU, Common EXH to stations ase ottom c(t)1/ c(t)1/8 ase Side.9 (0.) 9. (0.) C (ø Onetouch fitting) C8 (ø8 Onetouch fitting) C: 8. (0.7) C8: 9.7 (0.) Note 1) Value for a single solenoid position valve mounted on the manifold. How to Order Valve Manifold Specify the part numbers for the valve(s), blank plate ass'y, and manifold base. Example SSYJ pc. (Manifold base) SYJ71-G pcs. (Valve) SYJ pc. (lank plate ass'y) SSYJ pc. (Manifold base) SYJ710-LZ...1 pc. (Valve) SYJ70-LZ...1 pc. (Valve) SYJ pc. (lank plate ass'y) Use manifold specification sheet. 1.-

62 Series SYJ7000 Flat Cable Manifold Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance With the flat cable manifold, each valve is wired to the manifold base. single MIL specification flat cable connects the entire manifold to the power source. This greatly reduces installation time. How to Order Valve 1 DC C SYJ7 Configuration position single solenoid position double solenoid position closed center position exhaust center position pressure center 1 D E SYJ7 1 1 ated voltage 0V C 1V C(V C) Flat Cable Manifold Specifications Type Manifold style (SU), (EXH) sytle Valve stations, port specifications ort size Valve effective area mm (Cv) (1) Connector Internal wiring () ated voltage, port, port 1 Single base style/ mount Common SU, Common EXH to stations Valve c(t)1/ c(t)1/8,c, C8 c(t)1/8: (0.) C: 8. (0.8) C8: 9.9 (0.) Socket: poles MIL type with strain relief conforms to MIL-C-80 oth for +COM and COM V DC, V DC Note 1) Value for a single operation of position valve mounted on the manifold base. Note ) The withstand voltage specification for the unit with section conforms to JISC070, Grade 1 or its equivalent How to Order Valve Manifold Specify the part numbers for the valve(s), blank plate ass'y, and manifold base. Example Non-locking push style ush-turn-locking slotted style ush-turn-locking knob style SYJ7 Use manifold specification sheet. SSYJ pc. (Manifold base) SYJ7-LOU-C8... pcs. (Valve) SYJ7-LOU-C8... pcs. (Valve) SYJ pc. (lank plate ass'y) SY pcs. (Connector ass'y) SY pcs. (Connector ass'y) Caution The manifold can be wired for either positive or negative common because only non-polar valves are used. The use of valves other than non polar types are not recommended. It may cause damage to the electrical circuit. ated voltage V DC V DC LOU 1 LOZ C C8 / port size ase mounted ø One-touch fitting ø8 One-touch fitting Note) Flat cable style: "U" type is for DC and "Z" type is for C specification. Contact SMC for other specifications. How to Order Connector ss'y For V/V DC Single solenoid Double solenoid position Single with spacer ass'y Double solenoid position with spacer ass'y For 0VDC Single solenoid Double solenoid position Single with spacer ass'y Double solenoid position with spacer rass'y SY SY SY SY SY SY SY SY For 1V DC(V C) Single solenoid SY Double solenoid SY position Single SY with spacer ass'y Double solenoid position SY with spacer ass'y SY SYJ SX VK VZ VF VF V7 V VQ VQ VQZ VQD VZS VFS VS VS7 1.-