Dust Water High Temperature

Transcription

1 Improved life within & environments. Dust Water High Temperature Environment Resistant ctuators For Paper Powder and Dust With heavy-duty scraper Removal of foreign particles adhered to the rod Water Resistant, Corrosion Resistant Water resistant cylinder Water resistant special scraper Heavy-duty scraper Removal of foreign particles Material: Stainless steel (Piston rod, Rod end nut) Water resistant 2-color indication type solid state auto switch Stainless steel cylinder With Rod boot / With dust cover ll stainless steel specifications (External parts) For High Temperature Heat resistant 1 C Seal material: Fluororubber Heat resistant grease Transfer of corrugated boxes Device cleaning P-E09-4

2 Environment Resistant ctuators Variations ir Cylinder Series Pin Cylinder For Paper Powder and Dust Water Resistant, Corrosion Resistant For High Temperature With heavy- Made of Water resistant Heat resistant duty scraper With rod boot stainless steel (With special scraper) ( 10 to 1 C) P.3 P.8 P.14 P.18 P.23 CJP2 ir Cylinder CJ2 ir Cylinder CM2 ir Cylinder CG1 ir Cylinder M Square Tube Type ir Cylinder M1 ir Cylinder C2 ir Cylinder CS1 ir Cylinder CS2 Mini Free Mount Cylinder CUJ Free Mount Cylinder CU Compact Cylinder / Compact Type CQS Compact Cylinder CQ2 Compact Cylinder with ir Cushion RQ Stainless Steel Cylinder CJ5 Stainless Steel Cylinder CG5 Hygienic Design Cylinder HY Magnet Type Rodless Cylinders CY3 Compact Guide Cylinder MGP Compact Guide Cylinder MGQ Guide Cylinder MGG 1

3 ir Cylinder Series Guide Cylinder / Compact Type MGC Dual Rod Cylinder For Paper Powder and Dust Water Resistant, Corrosion Resistant For High Temperature With heavy- Made of Water resistant Heat resistant With rod boot duty scraper stainless steel (With special scraper) ( 10 to 1 C) P.3 P.8 P.14 P.18 P.23 CXS Dual Rod Cylinder CXSJ Valve Mounted ir Cylinder CVM5 Valve Mounted ir Cylinder CV3 Valve Mounted ir Cylinder CVS1 Cylinder with Lock CN2 Cylinder with Lock CNG High Power Cylinder RHC ir Gripper Series Linear Guide Parallel Style ir Gripper MHZ Linear Guide Low Profile ir Gripper MHF2 Parallel Style ir Gripper Wide Opening MHL2 Slide Guide 2-Finger Type ir Gripper MHK2 Slide Guide 3-Finger Type ir Gripper MHS ngular Style ir Gripper Standard MHC Toggle type ir Gripper MHT2 180 ngular Style ir Gripper Cam Style MHY2 180 ngular Style ir Gripper Rack & Pinion Style MHW2 With dust cover Heat resistant ( 10 to 100 C) P.9 P. 3 Finger only 2

4 ir Cylinder With Heavy-duty Scraper: -XC4 pplicable for use in paper powder and dust environments with the use of a heavy-duty scraper on the wiper ring. pplicable Series Series CM2 CG1 M M ir cylinder MW M1 M1 ir cylinder M1W C2 C2 ir cylinder End lock cylinder C2W C2 CS1 CS1 ir cylinder CS1W RQ Compact cylinder with air cushion RQ ir cylinder CQ2 CQ2 xial piping type (Centralized piping type) CQP2 Long stroke CQ2 CVM5 Valve mounted air cylinder CVM5 CV3 CV Valve mounted cylinder CVS1 MGP ir cylinder MGG Guide cylinder MGC CNG Cylinder with lock CN2 Cylinder with lock Description Centralized piping type End lock cylinder ir cylinder Compact guide cylinder Model ction CM2 CM2W, Double rod CM2 P CM2 CG1 MGP MGG MGC CNG CN2 C2 H (ir-hydro type) comes with a heavy-duty scraper as standard. Note Head side locking type only (Except with air cushion) From P. 128 ø to ø63 only From P. 222 From P. 290, Double rod From P. 3, Double rod, Double rod Head side locking type only From P. 356 From P. 412, Double rod ø20 to ø100 ø to ø100 From P. 774 CT.ES From P From P ø20 to ø100 (Except with air cushion or end lock) From P. 272 Except ø20, ø From P. 356 Except ø20, ø From P. 392 ø, ø only From P. 669 CT.ES page ES ES Standard model no. For Series MGP, refer to page 7. XC4 With heavy-duty scraper (SC scraper) : Same as standard type. Caution Do not replace heavy-duty scrapers. Since heavy-duty scrapers are press-fit, do not replace the cover only, but rather the entire rod cover assembly. (Holder plate assembly in the case of Series MGP) Series CM2 cannot replace either heavy-duty scraper or rod seal. (It goes for replacing retainer assembly for Series CS1.) Replace the CN2 series with the lock unit. 3

5 With Heavy-duty Scraper: -XC4 Construction (Dimensions are the same as standard.) Series CM2 Series CM2W Series C2 Series CVM Series CS1 Series CV3 Series CM (Only with head side locking) Series CVS1 Series M Series CN2 4

6 With Heavy-duty Scraper: -XC4 Dimensions Series M Series M1 ZZ + Stroke Series M, M1 ore size F H ZZ Series CG1 ZZ + Stroke Series CG1 ore size 63 E F F M I H ZZ Other dimensions are the same as double acting, single rod, standard type. On the axial foot style and the rod side flange style, the installation bracket is wedged and bolted between the cylinder and the scraper at the time of shipment. On other styles, it is placed in the same package (not assembled). Long stroke ZZ Series CQ2 ( ): Denotes the dimensions with auto switch. Other dimensions are the same as for CQ2/standard type. ore size, without switch, 5 strokes: Q-dimensions is Relation between bore size 12 to piping port and mounting holes is as the following diagram. Please contact SMC for bracket style. pplicable stroke available by the 5 mm interval. Series CQ2 ore size (46) 37.5 (47.5) () 46.5 (56.5) 48.5 (58.5) 54 (64) 63.5 (73.5) 75 (85) () 56.5 (56.5) 58.5 (58.5) 64 (64) 73.5 (73.5) 85 (85) + Stroke + Stroke stroke or less 75, 100 stroke 1 to 300 stroke stroke or less 75, 100 stroke 1 to 300 stroke 67.5 (67.5) 77 (77) 78.5 (78.5) 80 (80) 91 (91) (102.5) 29.5 (41.5).5 (42.5) 33 (43) 29.5 (39.5) 30.5 (.5) 36 (46) 43.5 (53.5) 53 (63) 43 (43) 39.5 (39.5).5 (.5) 46 (46) 53.5 (53.5) 63 (63) 55.5 (55.5) 55 (55) 55.5 (55.5) 57 (57) 66 (66) 75.5 (75.5) Without switch: ore size 20 to With switch: ore size T stroke or less G 1 stroke or more With switch: ore size 20, Q stroke or less 1 stroke or more 19 (20.5) 21 (21) 20.5 (20.5) 11 (11) 10.5 (10.5) 15 (15) 16 (16) 23 (23) 14 (14) 14 (14) 16.5 (16.5) 19 (19) 23 (23)

7 With Heavy-duty Scraper: -XC4 Dimensions (Dimensions other than below are the same as standard type.) Series RQ øt 5 + Stroke + Stroke I.D. 20, Caution Do not replace heavy-duty scrapers. Since heavy-duty scrapers are press-fit, do not replace the cover only, but rather the entire rod cover assembly. Contact SMC for the rod cover assembly part number. F + Stroke + Stroke ore size T F Contact SMC for cylinders with I.D. 20 to brackets. Only standard strokes are applicable. Series CNG F M F øi2 øe2 H ZZ + Stroke ore size E F 8 8 F 3 3 M 5 6 I H ZZ Other dimensions are the same as the standard type. (The above figure shows the rubber bumper type.) On the axial foot style and the rod side flange style, the installation bracket is wedged and bolted between the cylinder and the scraper at the time of shipment. Long stroke ZZ Caution Do not replace heavy-duty scrapers. Since heavy-duty scrapers are press-fit, they must be replaced together with the seal holder assembly. Series MGG ø to ø Series MGC ø to ø Small flange L Small flange ore size ore size L L : Same as standard type. Note 1) Except ø20 and ø. Note 2) Heavy-duty scrapers are attached to the piston rod and guide rods (front and back). Note 3) Rod side heavy-duty scrapers for ø to ø are press-fit to large and small flanges. When replacing them, replace the large and small flange assemblies. L 6

8 With Heavy-duty Scraper: -XC4 /MGP M L MGP MGP ore size Port thread type Stroke XC4 With heavy-duty scraper Suffix Nil With single side scraper W With both sides scraper pplicable series earing type ore size Minimum With single side operating pressure With both sides MGPM MGPL/MGP Slide bearing all bushing bearing 20,,,,, 63, 80, MPa 0.14 MPa other than above are the same as standard type. Dimensions (Dimensions other than below are the same as standard type.) HT øds 4 x ømt FT F + Stroke + Stroke E FT W + 2 x Stroke For cylinder with both sides scraper EW + Stroke Common Dimensions: MGPM, MGPL, MGP ore size F FT With oth Sides Scraper Dimensions: W, EW, MT, DS ore size DS W EW MT MGPM MGPL, MGP ypass port size for guide rod with bottom mounting. MGPL, MGP (all bushing bearing), E, HT Dimensions E ore size 30 st Over 30 st Over 100 st Over 30 st Over 30 st Over 100 st Over or less to 100 st to 200 st 200 st or less to 100 st to 200 st 200 st HT ore size 63 ore size st or less st or less Over st to 100 st Over st to st Over 100 st to 200 st Over st to 200 st Over 200 st Over 200 st st or less st or less 13 5 Over st to 100 st Over st to st E E Over 100 st to 200 st Over st to 200 st Over 200 st Over 200 st HT HT MGPM (Slide bearing), E, HT Dimensions ore size st Over st Over st or less to 200 st 200 st or less E Over st to 200 st Over 200 st HT XC

9 ir Cylinder Cylinder with rod boot Protects the rod from adhering paper powder and dust, etc. by rod boot. pplicable Series Series Description ir cylinder ir cylinder CM2 Non-rotating rod type Centralized piping type End lock cylinder ir cylinder CG1 ir cylinder End lock cylinder ir cylinder ir cylinder M Non-rotating rod type End lock cylinder ir cylinder M1 ir cylinder Non-rotating rod type ir cylinder ir cylinder Non-rotating rod type C2 Non-rotating rod type End lock cylinder ir-hydro type ir-hydro type ir cylinder CS1 ir cylinder Low friction type ir cylinder CS2 Smooth Cylinder Valve mounted cylinder CVM5 Valve mounted cylinder Valve mounted cylinder CV3 Valve mounted cylinder Valve mounted cylinder CVS1 Valve mounted cylinder CLM2 Fine lock cylinder CL1 Lock up cylinder CNG Cylinder with Lock Cylinder with Lock MN Cylinder with Lock Cylinder with Lock CN2 Cylinder with Lock CNS Cylinder with Lock CLS Cylinder with Lock Model CM2 CM2W CM2K CM2 P CM2 CG1 CG1W CG1 M MW MK M M1 M1W M1K C2 C2W C2K C2KW C2 C2 H C2 WH CS1 CS1W CS1 Q CS2W CS2Y CVM5 CVM5K CV3 CV3K CVS1 CVS1K CLM2 CL1 CNG MN MNW CN2 CN2W CNS CLS ction, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod From P.128 From P.222 From P.290 From P.3 From P.356 From P.412 CT.ES From P.1563 From P.1604 From P.1624 From P.611 From P.636 From P.672 From P.696 CT.ES From P.760 From P.786 page ES ES Rod boot Rod oot Material Symbol Rod oot Material Maximum operating temperature J Nylon tarpaulin 70 C K Heat resistant tarpaulin 110 C Maximum ambient temperature for the rod boot itself. With rod boot 8

10 ir Gripper ir Gripper with Dust Cover Prevent the entry of paper powder and dust with the use of a dust cover. pplicable Series Series Description Model MHK Wedge cam operation slide guide MHK2 MHKL2 MHS MHZ 3-finger type with dust cover Parallel style with dust cover (Compact) MHSJ3 MHZJ2 With through hole and dust cover Parallel style with dust cover MHSHJ3 MHZJ2 ction, Single acting (Normally open, Normally closed), Single acting (Normally open, Normally closed), Single acting (Normally open, Normally closed), Single acting (Normally open, Normally closed) page P.522 P.562 P.570 P.388 P.424 Dust cover Material Nil Chloroprene rubber (CR) F Fluororubber (FKM) S Silicon rubber (Si) MHZJ2 MHZJ2 MHK2 MHSJ3 MHSHJ3 9

11 ir Gripper with Dust Cover Dust Cover dhesion: -X77 Prevent the entry of paper powder and dust with the use of a dust cover. pplicable Series Series Description Model ction Note page MHK Wedge cam operation slide guide, Single acting MHK2 (Normally open, Normally closed) P.522, Single acting MHKL2 (Normally open, Normally closed) 3-finger type with dust cover MHSJ3 P.562 MHS MHZ With through hole and dust cover Parallel style with dust cover MHSHJ3 MHZJ2, Single acting (Normally open, Normally closed) ø10, ø16, ø20, ø only P.570 P.424 Standard part number for each series Dust cover adhesion Standard part number for each series X77 X77 Note 1) For -X77, only the finger part is bonded. Note 2) The relief port can be attached to both -X77 and -X77. Note 3) The dust cover cannot be removed and replaced. Note 4) e sure to connect the dust cover to the relief port used for dust cover breathing before operating. Note 5) For the single acting type, be sure to use the vent hole after being piped. Dust cover adhesion/finger part only dhesive Cyano superglue Dimensions (Dimensions other than specified below are the same as the standard type.) 2 MHK L2- -X77 dhesive dhesive 1 dhesive 1 to 2 dhesive 1 S S O O P 2 Relief port P 2 Relief port Model MHK2-12 -X77 MHK2-16 -X77 MHK2-20 -X77 MHK2- -X77 MHKL2-12 -X77 MHKL2-16 -X77 MHKL2-20 -X77 MHKL2- -X P M3 x 0.5 M5 x 0.8 M3 x 0.5 M5 x 0.8 1) For -X77, the body part is not bonded, but only the finger part. 2) Use the relief port after being piped. 3) For the single acting type, be sure to use the vent hole after being piped. 10

12 Dust Cover dhesion: -X77 Dimensions (Dimensions other than specified below are the same as the standard type.) MHSJ3- D -X77 MHSHJ3- D -X77 P 2 Relief port O S dhesive 1 to 2 With center pusher P 2 Relief port 1 to 2 dhesive 1 C O dhesive 1 to 2 MHZJ2- -X77 S dhesive 1 1 to 2 dhesive Model MHSJ3-16D -X77 MHSJ3-20D -X77 MHSJ3-D -X77 J MHS HJ 3-D -X77 J MHS HJ 3-D -X77 J MHS HJ 3-D -X77 J MHS HJ 3-63D -X77 J MHS 3-80D -X77 HJ C ) For -X77, the body part is not bonded, but only the finger part. 2) Use the relief port after being piped. 3) ody through-hole mounting is not possible. P M3 x 0.5 M5 x dhesive 1 to 2 dhesive 1 S P 2 Relief port O Series MHZJ2 Model MHZJ2-10 -X77 MHZJ2-16 -X77 MHZJ2-20 -X77 MHZJ2- -X ) For -X77, the body part is not bonded, but only the finger part. 2) Use the relief port after being piped. 3) For the single acting type, be sure to use the vent hole after being piped. P M3 x 0.5 M5 x 0.8

13 ir Gripper with Dust Cover Dust Cover Caulking: -X78 Dustproof and dripproof pplicable Series Series Description Model ction Note page, Single acting MHK2 (Normally open, Normally closed) MHK Wedge cam operation slide guide P.522, Single acting MHKL2 (Normally open, Normally closed) MHSJ3 P.562 MHS MHZ 3-finger type with dust cover With through hole and dust cover Parallel style with dust cover Standard part number for each series MHSHJ3 MHZJ2, Single acting (Normally open, Normally closed) ø10, ø16, ø20, ø only X78 Dust cover caulking Standard part number for each series X78 P.570 P.424 Note 1) For -X78, caulking is applied to only the finger part. Note 2) Relief port can be mounted on both -X78 and -X78. Note 3) Use the dust cover after being piped to the relief port for dust cover breathing. Note 4) For the single acting type, be sure to use the vent hole after being piped. Dust cover caulking/finger part only Caulking agent Silicone adhesive, sealant (white) Dimensions (Dimensions other than specified below are the same as the standard type.) 2 MHK - -X78 L2 Caulking treatment Caulking treatment 1 Caulking treatment 1 to 2 Caulking treatment 1 S S O O P 2 Relief port P 2 Relief port Model MHK2-12 -X78 MHK2-16 -X78 MHK2-20 -X78 MHK2- -X78 MHKL2-12 -X78 MHKL2-16 -X78 MHKL2-20 -X78 MHKL2- -X P M3 x 0.5 M5 x 0.8 M3 x 0.5 M5 x 0.8 1) Caulking treatment is not applied to the body of -X78, but only to the finger part. 2) Use the relief port after being piped. 3) For the single acting type, be sure to use the vent hole after being piped. 12

14 Dust Cover Caulking: -X78 Dimensions (Dimensions other than specified below are the same as the standard type.) MHSJ3- D -X78 MHSHJ3- D -X78 P 2 Relief port O S Caulking treatment 1 to 2 With center pusher P 2 Relief port Caulking treatment 1 1 to 2 C O Caulking treatment 1 to 2 MHZJ2- -X78 S Caulking treatment 1 1 to 2 dhesive Model MHSJ3-16D -X78 MHSJ3-20D -X78 MHSJ3-D -X78 J MHS HJ3-D -X78 J MHS HJ3-D -X78 J MHS HJ3-D -X78 J MHS HJ3-63D -X78 J MHS 3-80D -X78 HJ P M3 x 0.5 M5 x 0.8 1) Caulking treatment is not applied to the body of -X78, but only to the finger part. 2) Use the relief port after being piped. 3) ody through-hole mounting is not possible. 20 C Caulking treatment 1 to 2 Caulking treatment 1 S P 2 Relief port O Series MHZJ2 Model MHZJ2-10 -X78 MHZJ2-16 -X78 MHZJ2-20 -X78 MHZJ2- -X P M3 x 0.5 M5 x 0.8 1) Caulking treatment is not applied to the body of -X78, but only to the finger part. 2) Use the relief port after being piped. 3) For the single acting type, be sure to use the vent hole after being piped.

15 ir Cylinder Made of Stainless Steel: -XC6 pplicable for use under enrironments with water splashing. Stainless steel parts improve corrosion resistance. pplicable Series Series CM2 ir cylinder Description Non-rotating rod type Direct mount type Model ction CM2 Single acting (Spring return/extend) CM2W, Double rod CM2K Single acting (Spring return/extend) CM2KW, Double rod CM2R Non-rotating rod, Direct mount type CM2RK Centralized piping type CM2 P Smooth cylinder CM2Y ir-hydro type CM2H Direct mount type, air-hydro type CM2RH End lock cylinder CM2 ir cylinder CG1 Single acting (Spring return) CG1 Double rod type CG1W, Double rod Direct mount type CG1R Smooth cylinder CG1Y ir cylinder M Note 2) MW, Double rod M Non-rotating rod type MK Low friction type M Q M1 Note 2) ir cylinder M1 M1W, Double rod Non-rotating rod type M1K ir cylinder C2 C2W, Double rod Note 2) Note 1) C2 End lock cylinder C2 ir-hydro type C2H Smooth cylinder C2 Y CQS Compact cylinder Single acting (Spring return/extend) CQS CQSW, Double rod Non-rotating rod type CQSK Lateral load resisting type CQS S CS1 Note 2) ir cylinder CS1 CS1W, Double rod ir-hydro type CS1H Note 2) CS2 Note 3) ir cylinder CS2 CS2W, Double rod CQ2 Compact cylinder Single acting (Spring return/extend) CQ2W, Double rod CQ2 xial piping type CQP2 (Centralized piping type) Single acting (Spring return/extend) Long stroke CQ2 Lateral load resisting type CQ2 S page From P. 128 From P. 222 From P. 290 From P. 3 From P. 356 From P. 551 From P. 412 ES ES pplicable Series Series CV Description Valve mounted cylinder MGP Compact guide cylinder MGG Guide cylinder MGC Guide cylinder CXS Dual rod cylinder CXSJ Dual rod cylinder compact type RHC High power cylinder Model CVM5 CVM5K CV3 CVS1 MGP MGG MGC CXSM CXSJM RHC CM2, CG1, M, M1, C2, CS1, CQS, CQ2, CV Standard model no. Maximum Stroke Series C2, M, M1 (ore size 100) Others same as the standard type CS1 CS2 ction page From P From P. 272 From P. 356 From P. 392 From P. 561 From P. 549 From P Note 1) Head side locking type only. Note 2) There is a maximum stroke limit for C2, M, M1 (ø100), CS1 and CS2 cylinders. Note 3) The CS2 series, made of stainless steel, is applicable as -XC68. Made of stainless steel 10 (Same as standard) 1200 Parts changed to stainless steel other than above and external dimensions XC6 rod with rod boot Piston rod, rod end nut Same as standard Note 1) In the case of CS1 cylinder, the piston rod is only made of stainless steel. Rod end nut is not attached. Note 2) In the case of CQ cylinder, its snap ring and piston rod are made of stainless steel. Rod end nut is also made of stainless steel for rod end male thread type. 14

16 Made of Stainless Steel: -XC6 Series MGP MGP M L Standard model no. XC6 Made of stainless steel Suffix Stainless steel used on all standard iron parts Stainless steel rod parts qpiston rod wguide rod eplate yretaining ring Stainless Steel Modified Parts XC6 q, w, e, r, t, y XC6 q, w, t, y and external dimensions other than above are the same as standard type. rplate mounting bolt thexagon socket head plug Series CXSJM CXSJM Standard model no. XC6 Retaining ring Parts changed to stainless steel Made of stainless steel Piston rod, retaining ring, hexagon socket head bolt, hexagon socket head set screw, dumper bolt, hexagon nut Hexagon socket head set screw Piston rod Hexagon socket head bolt Dumper bolt Hexagon nut other than above and external dimensions Same as standard Note) The head cover retaining ring for ø6 is made of special steel. Series CXSM CXSM Standard model no. Made of stainless steel Parts changed to stainless steel other than above and external dimensions XC6 Piston rod, retaining ring, hexagon socket head bolt, hexagon socket head set screw, dumper bolt, hexagon nut, hexagon socket head plug Same as standard Dumper bolt Piston rod Hexagon socket head set screw Hexagon nut Hexagon socket head plug Retaining ring (Rod side, head side) Hexagon socket head bolt 15

17 Made of Stainless Steel: -XC6 Series MGG MGG Standard model no. Nil C XC6 Made of stainless steel Suffix Piston rod, rod end nut made of stainless steel Stainless steel used on all standard iron parts Stainless steel rod end moving parts Stainless steel rod parts Stainless Steel Modified Parts Symbol ore size Parts no. 20,,,, r!1 -XC6 63, 80, 100 r!0 20,,, -XC6 -XC6 -XC6C 63, 80, ,,,, 63, 80, ,,,, 63, 80, 100 $0 r!1!7@0@1@2@3#1#5 r!0!5!8!9@0@1@9#3 r!1@0 r!0!8 Series MGC MGC earing type Mounting style ore size Stroke Equipped/Not equipped back plate uto switch Note!9 is type L only.!7 is type L only, #1 is type only, #9 and $0 are type F only. #1 is rod side is rod side only. page P.369 Refer to the construction of the standard type ( No. 3) for part numbers. other than the above are the same as the standard type. Note) RL (coolant resistant) type shock absorbers are used. (-XC6 only) XC6 Stainless Steel Modified Parts Symbol ore size Parts no. -XC6 20,,,, r!0!1!2!4@3@4@5@6@7@8 -XC6 is type L -XC6 20,,,, r!0!1!2!4@4@7@8@9#0#8 -XC6C 20,,,, r!0!1!2!4@7 Note page r!4 ES P.10 Refer to the construction of the standard type (CT.ES20-209) for part numbers. and dimensions other than the above are the same as the standard type. Nil C Made of stainless steel Suffix Piston rod, rod end nut made of stainless steel Stainless steel used on all standard iron parts Stainless steel rod end moving parts Stainless steel rod parts Dimensions (Dimensions other than below are the same as standard type.) MGG 20 to - -XC6 Small flange L MGC 20 to - -XC6 Small flange L ore size L MGG 20 to - -XC6 MGG 20 to - -XC6C Small flange MGC 20 to - -XC6 MGC 20 to - -XC6C Small flange ore size MGG F20 to - -XC6 MGG F20 to - -XC6 MGG F20 to - -XC6C Front mounting flange MGC F20 to - -XC6 MGC F20 to - -XC6 MGC F20 to - -XC6C Front mounting flange ore size

18 ir Cylinder Tie-rod, Cushion Valve, Tie-rod Nut, etc. Made of Stainless Steel: -XC7 pplicable for use under enrironments with water splashing. Stainless steel parts improve corrosion resistance. pplicable Series Series M M1 C2 Description Standard type Non-rotating rod type Low friction type Cylinder with end lock Standard type Non-rotating rod type Standard type Non-rotating rod type End lock cylinder Model ction page M MW MK M Q M M1 M1W M1K C2 C2W C2K C2KW C2, Single rod, Double rod, Single rod, Single rod, Single rod, Single rod, Double rod, Single rod, Single rod, Double rod, Single rod, Double rod, Single rod From P. 290 From P. 3 From P. 356 pplicable Series Series CV Description Valve mounted cylinder Model ction page CV3, Single rod CVS1, Single rod CV3K, Single rod From P CVS1K, Single rod Standard model no. XC7 Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel Component parts changed to stainless steel Tie-rod, tie-rod nut, mounting bracket nut, spring washer, cushion valve, lock nut dditional specifications Dimensions Same as standard type 17

19 Water Resistant Cylinder pplicable for use under enrironments with water splashing. Entry of water is reduced by a special scraper. Stainless steel type is available. (-XC6) Two types of seal material, NR or FKM (fluororubber), can be selected. Series CM2 ø20 to ø Series CG1 ø to ø100 P.128 P.222 CDM2 Mounting ore size Port thread type R Stroke H7L -XC6 CDG1 Mounting ore size R Stroke H7L -XC6 With auto switch (uilt-in magnet) Water resistant cylinder R NR seals (Nitrile rubber) V FKM seals (Fluororubber) Nil Cushion Rubber bumper ir cushion Water resistant 2-color indication solid state auto switch Made of stainless steel With auto switch (uilt-in magnet) Water resistant cylinder R V NR seals (Nitrile rubber) FKM seals (Fluororubber) Water resistant 2-color indication solid state auto switch H7L ø to ø63 G5L ø80, ø100 Caution The scraper cannot be replaced since it is press-fit in the rod cover. Made of stainless steel Rod seals and scrapers are not replaceable. The above parts cannot be replaced since the scraper is press-fit in the rod cover. ction ore size Cushion uto switch mounting Made to order Dimensions ore size 20, single rod 20,,, Rubber bumper, air cushion and mounting Piston rod, rod end nut made of stainless steel (-XC6) other than above are the same as standard, basic style. øe1h8 Caution NN1 NN2 E1 E2 NN M22 x 1.5 NN2 M20 x 1.5 Other specifications are the same as the double acting, single rod standard type. (n asterisk means it is the same as the standard type.) Mounting racket : Part No. Mounting bracket Min. ore size Description order qty. 20 (t min. order qty.) xial foot style Flange Trunnion (with nuts) CM-L020C CM-F020C CM-T020C 2 foots, 1 mounting nut 1 flange, 1 mounting nut 1 trunnion, 1 trunnion nut The brackets for ø to ø are the same for the standard type. Order 2 foot brackets for each cylinder unit. øe2h8 ction ore size Cushion uto switch mounting Made to order Dimensions Rubber bumper (øe1) (øe1) ir cushion ore size (E1) E 18 30, single rod,,, 63, 80, 100 Rubber bumper, air cushion and mounting Piston rod, rod end nut made of stainless steel (-XC6) other than above are the same as standard, basic style. G (F1) T (F1) W G (F1) T F S + Stroke ZZ + Stroke S + Stroke ZZ + Stroke G S 77 (85) 84 (93) 97 (109) 97 (109) 116 (130) 117 (131) T W øe F øe F ZZ 119 (127) 136 (145) 157 (169) 157 (169) 190 (204) 191 (205) Other specifications are the same as the double acting, single rod standard type. (n asterisk means it is the same as the standard type.) ( ): For the long stroke type. 18

20 Water Resistant Cylinder Series M ø to ø100 Series M1 ø to ø100 P.290 P.3 MD Mounting ore size Port thread type R Stroke M9 (V)L -XC6 MD1 Mounting ore size Port thread type R Stroke M9 (V)L -XC6 With auto switch (uilt-in magnet) Water resistant cylinder R NR seals (Nitrile rubber) V FKM seals (Fluororubber) Water resistant 2-color indication solid state auto switch Made of stainless steel With auto switch (uilt-in magnet) Water resistant cylinder R NR seals (Nitrile rubber) V FKM seals (Fluororubber) Water resistant 2-color indication solid state auto switch Made of stainless steel ction ore size Cushion uto switch mounting Made to order, single rod,,, 63, 80, 100 ir cushion Tie rod mounting Piston rod, rod end nut made of stainless steel (-XC6) other than above are the same as standard, basic style. ction ore size Cushion uto switch mounting Made to order, single rod,,, 63, 80, 100 ir cushion Tie rod mounting Piston rod, rod end nut made of stainless steel (-XC6) other than above are the same as standard, basic style. Dimensions Dimensions H F ZZ + Stroke H F ZZ + Stroke ore size F H ZZ 135 (141) 146 (152) 165 (173) 165 (173) 199 (209) (209) Other specifications are the same as the double acting, single rod standard type. ( ): For the type without an air cushion. ore size F H ZZ 135 (141) 146 (152) 165 (173) 165 (173) 199 (209) (209) Other specifications are the same as the double acting, single rod standard type. ( ): For the type without an air cushion. 19

21 Water Resistant Cylinder Compact Cylinder Series CQ2 ø20 to ø100 ES Series C2 ø to ø100 P.160 P.356 CDQ2 Mounting ore size Port thread type R Stroke D Option Z M9 (V)L -XC6 CD2 Mounting ore size Port thread type R Stroke M9 (V)L -XC6 With auto switch (uilt-in magnet) Water resistant cylinder R NR seals (Nitrile rubber) V FKM seals (Fluororubber) Water resistant 2-color indication solid state auto switch F7(V)L ø20 to ø100 M9 (V)L ø20 to ø100 Made of stainless steel With auto switch (uilt-in magnet) Water resistant cylinder R NR seals (Nitrile rubber) V FKM seals (Fluororubber) Water resistant 2-color indication solid state auto switch Made of stainless steel Nil Suffix Retaining ring, piston rod, rod end nut made of stainless steel Piston rod, rod end nut, cover holding bolt made of stainless steel Note) Only ø20 to ø for -XC6. ction, single rod ore size 20,,,,, 63, 80, 100 ø20 to ø (through-hole) only ø to ø100 (through-hole), F (rod side flange) Mounting (both ends tapped), G (head side flange) L (foot), D (double clevis) Cushion None uto switch mounting Made to order Rail mounting (D-F7L/F7VL)/Direct mounting (D-M9 (V)L) Use auto switch brackets for ø20, ø Retaining ring, piston rod, rod end nut made of stainless steel (-XC6) other than above are the same as standard, basic style. ction ore size Cushion uto switch mounting Made to order, single rod,, 63, 80, 100 ir cushion Tie-rod mounting style Piston rod, Rod end nut made of stainless steel (-XC6) other than above are the same as standard, basic style. Note 1) ir-hydro type, rod boot specifications of Series C2 are excluded. Note 2) Combination of auto switches and steel tube is not available. Refer to page 160 of CT.ES for details. Dimensions Other specifications are the same as the double acting, single rod standard type. 20

22 Water Resistant Cylinder Compact Guide Cylinder Series MGP ø20 to ø100 Guide Cylinder Series MGG ø to ø100 P.272 P.356 MGPM ore size Port thread type R Slide bearing Water resistant cylinder R NR seals (Nitrile rubber) V FKM seals (Fluororubber) ction earing type Slide bearing ore size 20,,,,, 63, 80, 100 MGPM R Rubber bumper Cushion MGPM V Without cushion uto switch mounting Direct mounting other than above are the same as standard, basic style. Note) MGPM V does not come with a cushion. Refer to the allowable kinetic energy. Dimensions Stroke Water resistant 2-color indication solid state auto switch M9 (V)L Piston rods and guide rods are made of stainless steel. Iron parts made of stainless steel are available as made to order. scraper is available only for the piston rod. MGGM Mounting ore size Port thread type R Stroke H7L Slide bearing Water resistant cylinder R NR seals (Nitrile rubber) Water resistant 2-color V FKM seals (Fluororubber) indication solid state auto switch scraper is available only for the piston rod. H7L G5L ø to ø63 ø80, ø100 -XC6 ction ore size,,, 63, 80, 100 earing type Slide bearing Cushion uilt-in rubber bumper and shock absorber uto switch mounting and mounting -XC6 Piston rod and rod end nut made of stainless steel -XC6 Stainless steel used on all iron parts Made to order -XC6 Stainless steel rod end moving parts -XC6C Stainless steel rods other than above are the same as standard, basic style. Note 1) RL (anti-coolant) type is used for shock absorbers. Dimensions (Dimensions other than the below are the same as the standard type.) ø to ø Front mounting flange Made of stainless steel F + Stroke + Stroke ø63 to ø100 Q X Y + Stroke Front mounting flange ore size elow etween Over strokes and 200 stokes 200 strokes Other specifications are the same as the standard type. 21 F X Q Y + Stroke ore size Q ( ): For the long stroke type. X Y 77 (85) 84 (93) 97 (109) 112 (124) 137 (151) 138 (152)

23 Hygienic Design Cylinder water resistant cylinder configured for easy cleaning. Five times increase in service life compared to water resistant cylinder. In SMC conditions. Grease for food (NSF-H1 certified) is available. External seal material: Choice of NR or FKM Mounting section: Conforms to ISO/VDM standard. (Series HYQ, HYC) Flat, grooveless configuration Eliminates the auto switch groove and the holes for cushion needle holes, etc. Conventional Cushion needle Plug bolt (Optional) Scraper HY New scraper Grease retention in guide rod and cylinder rod Plug bolt (Optional) HYG HYC Plug bolt (Optional) Cushion needle (PT.) HYQ External cover (Optional) Special coating (PT.) Guide accommodates a special coating. reathing port on guide (PT.) <Use example> Water dispersion environment General environment Piping at the breathing port on guide allows breathing outside the water dispersion environment. Series ore size External seal material ody material Optional parts Mounting brackets Page HY Plug bolt Foot Flange (ø to ø100) P.854 HYQ HYC NR, FKM luminum External cover Rod end Head end Foot Flange Single clevis Double clevis (ø to ø63) P.858 P.867 Plug bolt HYG P.873 Optional parts and mounting brackets must be ordered separately. Refer to pages 885 to 889 of No.2 for detailed specifications. 22

24 ir Cylinder Heat Resistant Cylinder ( 10 to 1 C): -X6 ir cylinder which changed the seal material and grease, so that it could be used even at higher temperature up to 1 from 10 C. pplicable Series Series CJP2 CJ2 CM2 CG1 M M1 C2 CUJ CU CQS CG5 CY3 CS1 CS2 CQ2 MGP MGQ MGG MGC CXSJ CXS Description Pin cylinder ir cylinder ir cylinder Non-rotating rod type Direct mount type Non-rotating rod, Direct mount type End lock cylinder ir cylinder Direct mount type ir cylinder ir cylinder ir cylinder End lock cylinder Mini free mount cylinder Free mount cylinder Non-rotating rod type Long stroke Long stroke, Non-rotating rod Compact cylinder Stainless cylinder Magnetically coupled rodless cylinder ir cylinder ir cylinder Compact cylinder xial piping type (Centralized piping type) Compact guide cylinder Guide cylinder Dual rod cylinder Model CJP2 CJ2 CJ2W CM2 CM2W CM2K CM2KW CM2R CM2RK CM2 CG1 CG1W CG1R M MW M1 M1W C2 C2W C2 CUJ CU CUK CU CUK CQS CQSW CG5 CY3 CS1 N CS1W N CS2 CS2W CQ2 CQ2W CQP2 MGPM MGQ MGG MGC CXSJ CXS ction, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod, Double rod asic type, Double rod, Double rod, Double rod Compact type asic type Note Except clevis and trunnion style Except with air cushion Except with air cushion Without a bumper for cylinders with a rubber bumper Without a bumper for cylinders with a rubber bumper Without a bumper for cylinders with a rubber bumper Except without air cushion Except without air cushion Except without air cushion Except without air cushion Except ø4 Except with rubber bumper Except with rubber bumper Without a bumper for cylinders with a rubber bumper (Grease for non-food is used.) No bumper pplicable bore size (ø1 to ø200) Except with rubber bumper Except with rubber bumper Except with rubber bumper Except those with air cushion or end lock Except ø12 to ø of MGQL (all bushing type) No shock absorber and rubber bumper are equipped. page From P. 23 From P. 42 From P. 128 From P. 222 From P. 290 From P. 3 From P. 356 From P. 466 From P. 483 From P. 551 From P. 8 From P From P. 412 CT.ES CT.ES From P. 272 From P. 338 From P. 356 From P. 392 From P. 549 From P. 561 ES ES Standard model no. mbient temperature range Seals materials Grease other than above and external dimensions Warning Precautions Heat resistant cylinder X6 10 C to 1 C (0 to 1 C for CS1 and CS2) Fluororubber Heat resistant grease Same as standard type e aware that smoking cigarettes, etc. after your hands have come into contact with the grease used in this cylinder can create a gas that is hazardous to humans. Note 1) Operate without lubrication from a pneumatic system lubricator. Note 2) Please contact SMC for details on the maintenance intervals for this cylinder, which differ from those of the standard cylinder. Note 3) In principle, it is impossible to make built-in magnet type and the one with auto switch. ut, as for the one with auto switch, and the heat resistant cylinder with heat resistant auto switch, since it will be differed depending on the series, please contact SMC. Note 4) Piston speed is ranged from to 0 mm/s. ut, for MGQ 80, 100, MGP 80, 100 and CY3 series it will be to 0 mm/s. Note 5) Please contact SMC for Series CQ2, CQS and MGQ with rubber bumper. Note 6) s for the ambient temperature range of Series CY3, since the magnetic holding force will be varied depending on the operating conditions, make sure that by referring to the next page. Note 7) The ambient temperature range of the CY3 series is to 1 C. 23

25 Heat Resistant Cylinder ( 10 to 1 C): -X6 Series CY3 CY3 ore size pplicable size ore size mbient and fluid temperature Port thread type Stroke Heat resistant cylinder CY3 ø6 to ø63 to 1 C X6 Maximum operating pressure 0.5 MPa Piston speed to 0 mm/s When using in less than 100 C range, since it could make a difference in the maintenance cycle, depending on the operating speed, use it at 200 mm/s or less. Operating Pressure Limit for Intermediate Stop and Vertical Operation Maximum operating pressure at the intermediate stop Magnetic Holding Force ore size MPa Use caution that the magnet coupling will be removed, if it is used to stop in an intermediate stroke by an external stopper with the operating pressure over 0.4 MPa. Holding force (at 1 C) Holding force (at 100 C) (N) Temperature Range for Operating Cylinder and Piston Speed 1. When using with the operating temperature from 60 up to 100 C, and the piston speed of more than 200 mm/s, please consult with SMC separately. 2. When using with the operating temperature from up to 100 C, and the piston speed of less than 200 mm/s, X6 specifications can be used. 3. s for X6, regarding the temperature range (over to 60 C) which overlaps the one of standard products, consider the tendency of operating temperature (upper, lower limits), then choose a model. Piston speed (mm/s) Standard products <Reference> e q w -X mbient temperature When using with the operating temperature fluctuated between C or less and 100 C or more, the operating speed, etc. will be largely restricted by the durability. Prior to use, please contact SMC. ( C) Maintenance cycle for X6 could vary substantially, depending on the operating condition and the ambient temperature. Even if using in our recommended range, as a guide, conduct it in around 1/2 intervals, compared to the standard products. Series MGC MGC Standard model no. X6 Series MGCL Heat resistant cylinder Dimensions (Dimensions other than the below are the same as the standard type.) L Small flange ore size 20 L

26 ir Gripper Heat Resistance: -X4 Seal material and grease have been changed, so that it could be used even at higher temperature up to 100 from 10 C. pplicable Series Series Description Model ction Note page MHC2, Single acting (Normally open) P.633 MHC ngular style MHC2, Single acting (Normally open) Magnet is not built-in. P.622 MHCM2 Single acting (Normally open) Magnet is not built-in. P.631 MHF Low profile MHF2 P.452 MHK Wedge cam operation slide guide MHK2 MHKL2, Single acting (Normally open, Normally closed), Single acting (Normally open, Normally closed) P.522 MHL MHS MHT MHW MHY Wide opening 2-finger type 3-finger type 3-finger type with dust cover With through hole With through hole and dust cover Long stroke 3-finger type 4-finger type Toggle type 180 angular style 180 angular style cam style MHL2 MHS2 MHS3 MHSJ3 MHSH3 MHSHJ3 MHSL3 MHS4 MHT2 MHW2 MHY2 P.474 P.544 P.552 P.562 P.570 P.586 P.596 P.644 P.669 P.662 Parallel style (compact) Parallel style with dust cover (compact) MHZ2 MHZJ2, Single acting (Normally open, Normally closed), Single acting (Normally open, Normally closed) Magnet is not built-in. Magnet is not built-in. P.388 MHZ Parallel style MHZ2, Single acting (Normally open, Normally closed) P.397 to 399 Parallel style (long stroke) MHZL2, Single acting (Normally open, Normally closed) P.414 Parallel style with dust cover MHZJ2, Single acting (Normally open, Normally closed) P.424 Standard part number for each series mbient temperature range Seal material Grease /dimensions other than the above Heat resistance X4 10 C to 100 C Fluororubber Heat resistant grease (GR-F) Same as the standard type Note 1) Magnet is built-in, but when using an auto switch, the acceptable temperature range becomes 10 to 60 C. Note 2) With the part number for the dust cover option, only fluororubber (F) or silicon rubber (S) options may be selected. Note 3) With the part number compatible with body options, only E type or M type are compatible. Note 4) For lubrication, specialized grease GR-F is recommended. Warning Handling Precautions e aware that smoking cigarettes after your hands have come into contact with the grease used for this air gripper can create a gas that is hazardous to humans.

27 Related Product Heat Resistance Vacuum Pad Vacuum Pad Series ZP ir Line Equipment Regulators for High Temperature (Made to Order) R/W-X4 Precision Regulators for High Temperature (Made to Order) IR-T Fittings & Tubing rass One-touch Fittings Series KQ Stainless Steel 316 One-touch Fittings Series KQG Stainless Steel 316 Insert Fittings Series KFG S Couplers Stainless Steel Type Series KK Fluoropolymer Fittings Hyper Fitting Series LQ1/LQ3 Fluoropolymer Tubing Series TL/TIL FEP Tubing (Fluoropolymer) Series TH/TIH Soft Fluoropolymer Tubing Series TD/TID Flow Control Equipment Speed Controller:High Temperature Series S-H Sensor Digital Flow Switch for Water (High Temperature Fluid Type) Series PF2W T Digital Flow Switch for Deionized Water and Chemicals Series PF2D For details, refer to the following page of the or individual catalog. 4 P P.346, P P.99 6 P P.3 6 P P.291, P P P P P P.1015 Vacuum Pad Series ZP Series KQG Series KK Series LQ1 Series LQ3 Series TL/TIL ES Corrosion Resistance / Water Resistance Directional Control Valves (IP65/IP67 compliant) 5 Port Solenoid Valve Series SV/VQC 4/5 Port Solenoid Valve Series SY/SYJ 7 mm Width Compact Pilot Type 5 Port Solenoid Valve Series S Port Solenoid Valve Series VQ 5 Port Solenoid Valve Series VQZ Fittings & Tubing (Stainless steel) Stainless Steel 316 One-touch Fittings Series KQG Stainless Steel 316 Insert Fittings Series KFG Miniature Fittings/Stainless Steel 316 Series MS S Couplers Stainless Steel Type Series KK Stainless Steel Speed Controller Series SG Sensor (IP65/IP67 compliant) High-Precision Digital Pressure Switch Series ZSE(F)/ISE 2-Color Display Digital Pressure Switch Series ISE70,75(H) 2-Color Display Digital Pressure Switch Series ZSE/ISE80 High-Precision Digital Pressure Switch for General Fluids Series ZSE/ISE,60 Pressure Sensor for General Fluids Series PSE56 Digital Flow Switch for ir/water Series PF2/2W 1 P.343, CT.ES P.101, 453 CT.ES11-88 CT.ES P P P.3 6 P P.267 CT.ES P P P P P.971 Series SV Series SG Series ISE80 ES11-88 ES ES Series VQC Series KFG Series PSE56 26

28 For Paper Powder and Dust Improved Life Environment Resistant ctuators Water Resistant, Corrosion Resistant For High Temperature