Parallel Style Air Gripper Series MHZ

Size: px
Start display at page:

Download "Parallel Style Air Gripper Series MHZ"

Transcription

1 Parallel tyle ir Gripper eries MHZ 17

2 Integral linear guide used for high rigidity Repeatability: ±.1 mm Low profile Martensitic stainless steel High degree of mounting flexibility Can be mounted five ways from three directions. xial mounting Lateral mounting Vertical mounting Finger positions can be selected. (tandard type/mhz2) tandard type (MHQG2 compatible width) Narrow type (MHQ2 compatible width) Using tapped holes Using end boss Using tapped holes Using through-holes Body option/piping port location Basic type ide ported Port End boss type (Bore size 1 to 2 mm only) ide ported (Double acting/ ingle acting) xial ported xial ported with ø One-touch fitting with ø Onetouch fitting for coaxial tubing (Double acting) (ingle acting) Port Port xial ported with M3 port (ingle acting) Port xial ported with M port (ingle acting) Port xial ported with ø hose nipple (ingle acting) Port Port Finger option Basic type (tapped in open/close direction) ide tapped Through-holes in open/close direction Flat type finger Bore size ( mm only) Bore size ( mm only) tandard Type eries MHZ2 Page 1 Compact eries (Without auto switch) Page 32 MHZJ2-/MHZJ2- (With dust cover) 1 2 ø ø ø1 to ø2 ø32, ø B 18

3 and high precision Body thickness tolerance: ±. mm No guide protrusion in direction of body thickness Improved remounting accuracy Positioning dowel pin holes provided Top mounting centering location Mounting is more secure with a depth. to 2 mm greater than conventional types. Integral guide rail construction Long troke Page 8 eries MHZL2 ccommodates diverse workpiece diameters with a single unit Nearly double the standard stroke Long stroke are also compact and lightweight Opening/Closing stroke (mm) eries (Open-Closed) Weight (g) Body thickness (mm) MHZL2-1 MHZL2-1 MHZL2-2 MHZL2-2 With Dust Cover eries MHZJ2 Cover materials Chloroprene rubber (Black) Fluororubber (Black) ilicone rubber (White) 8 () () 18 (1) 22 (1) Values inside ( ) are for standard series MHZ2. Page Prevents entry of chips, dust, water, etc. Prevents dispersion of grease and external leakage of dust ø1 to ø2 With dust cover Made to Order ø1 to ø2 MHZ MHF MHL MHR MHK MH MHC MHT -Z MHY MHW -X MRHQ M D- Made to Order ø Dust cover adhesion (Powerful adhesive used): -X77 Dust cover caulking (ilicone caulking agent used): -X78 ø1 to ø2 ø32, ø Made to Order 19 B

4 Parallel tyle ir Gripper eries MHZ2 eries Variations Basic type ide ported ide ported With One-touch fitting for coaxial tubing With One-touch fitting Body option End boss type With M3 port With M port eries Bore size (mm) ction tandard MHZ2- Page 32 With dust cover MHZJ2- Page 32 Double acting V V ingle acting (Normally open) V V V V ingle acting (Normally closed) V V V V Double acting V V ingle acting (Normally open) V V V V ingle acting (Normally closed) V V V V Double acting ingle acting (Normally open) ingle acting (Normally closed) V V V tandard MHZ2 Page 1 1, 1 2, 2 Double acting V V V ingle acting (Normally open) ingle acting (Normally closed) V V V V V V V V 32, Double acting ingle acting (Normally open) ingle acting (Normally closed) V V V Long stroke MHZL2 Page 8 With dust cover MHZJ2 Page 8 Page , 1 2, 2 1, 1 2, 2 Double acting V V V ingle acting (Normally open) ingle acting (Normally closed) Double acting ingle acting (Normally open) ingle acting (Normally closed) V V V V V V V V V V V Double acting V V V ingle acting (Normally open) ingle acting (Normally closed) V V V V V V V V 32, Double acting V Long stroke With dust cover MHZL2 Page 7-1 1, 1 2 Double acting V B 19-1

5 Finger option With hose nipple Basic type (tapped in open/close direction) ide tapped Through-holes in open/close direction Flat type finger Made to Order common specifications Page V V V V V V V V V V V V V V V Page 32 V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V -X Heat resistance ( 1 to 1 C) -X Fluororubber seal -X7 Closing direction spring assist -X Opening direction spring assist -X With flow control -X Without magnet -X1 MHQ2/MHQG2 compatible flat finger type -X3 Ethylene propylene rubber seal (EPDM) -X xial ported -X3 Fluorine grease -X Finger: ide tapped -X Finger: Through-holes in opening/closing directions -X77 Dust cover adhesion -X77B Dust cover adhesion/finger part only -X78 Dust cover caulking -X78B Dust cover caulking/finger part only -X79 Grease for food processing machines/fluorine grease -X79 Grease for food processing machines/ luminum complex soap base grease -X81 pecial black chromium treatment is made on only the finger. -X81B pecial black chromium treatment is made on the finger and guide. vailability varies depending on the model. For details, refer to "Made to Order" on pages 727 to 79. Page 1 Page 8 Page 8 V Page 79-1 MHZ MHF MHL MHR MHK MH MHC MHT -Z MHY MHW -X MRHQ M D- V Page

6 eries MHZ election election election Procedure tep 1 Confirm gripping force tep 2 Confirm gripping point tep 3 Confirm external force on fingers tep 1 Confirmation of Gripping Force Example Confirmation of conditions Workpiece mass:.1 kg Gripping method: External gripping Calculation of required gripping force Guidelines for the selection of the gripper with respect to workpiece mass lthough conditions differ according to the workpiece shape and the coefficient of friction between the attachments and the workpiece, select a model that can provide a gripping force of 1 to 2 times the workpiece weight, or more. Note) For further details, refer to the model selection illustration. If high acceleration, deceleration or impact forces are encountered during motion, a further margin of safety should be considered. election of model from gripping force graph MHZ2-1 External Gripping Force Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa Gripping point distance: L = 3 mm Operating pressure:. MPa Example) When it is desired to set the gripping force at 2 times or more above the workpiece weight. Required gripping force =.1 kg x 2 x 9.8 m/s N or more electing MHZ2-1D. gripping force of 2 N is obtained from the intersection point of gripping point distance L = 3 mm and pressure of. MPa. The gripping force is 2. times greater than the workpiece mass, and therefore satisfies a gripping force setting value of 2 times or more. election Illustration F µf µf F When gripping a workpiece as in the figure to the left, and with the following definitions, F: µ: Coefficient of friction between the attachments and the workpiece m : Workpiece mass (kg) g : Gravitational acceleration (= 9.8 m/s 2 ) mg: Workpiece weight (N) the conditions under which the workpiece will not drop are mg Gripping force at least 1 to 2 times the workpiece weight The 1 to 2 times or more of the workpiece weight recommended by MC is calculated with a safety margin of a =, which allows for impacts that occur during normal transportation, etc. When µ =.2 When µ =.1 F = mg 2 x.2 x = 1 x mg F = mg 2 x.1 x = 2 x mg 2 x µf > mg Number of fingers and therefore, mg 2 x µ With a representing the extra margin, F is determined by the following formula: mg F = x a 2 x µ 1 x Workpiece weight 2 x Workpiece weight Note) Even in cases where the coefficient of friction is greater than µ =.2, for reasons of safety, select a gripping force which is at least 1 to 2 times greater than the workpiece weight, as recommended by MC. If high acceleration, deceleration or impact forces are encountered during motion, a further margin of safety should be considered. F > 2

7 Parallel tyle ir Gripper eries MHZ tep 1 Effective Gripping Force: eries MHZ2/Double cting/external Gripping Force External Gripping Force External Gripping Force MHZ2-D/MHZ2-D MHZ2-2D/MHZL2-2D Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F 2 Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa F External Grip MHZ2, MHZ2, MHZL MHZ2-1D/MHZL2-1D MHZ2-32D 2 Pressure.7 MPa L 1 1 Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MPa. MPa. MPa.3 MPa.2 MPa MHZ2-1D/MHZL2-1D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZ2-2D/MHZL2-2D 3 2 Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa 1 1 MHZ2-D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa

8 eries MHZ election tep 1 Effective Gripping Force: eries MHZ2/Double cting/internal Gripping Force Internal Gripping Force Internal Gripping Force Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F MHZ2-D/MHZ2-D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZ2-2D/MHZL2-2D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa F Internal Grip MHZ2, MHZ2, MHZL2 L MHZ2-1D/MHZL2-1D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZ2-32D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZ2-1D/MHZL2-1D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZ2-2D/MHZL2-2D MHZ2-D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa

9 Parallel tyle ir Gripper eries MHZ tep 1 Effective Gripping Force: eries MHZ2/ingle cting/external Gripping Force External Gripping Force External Gripping Force Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F F External Grip MHZ2, MHZ2, MHZL2 L MHZ2-/MHZ2- MHZ2-1/MHZL Pressure.7 MPa Pressure.7 MPa. MPa. MPa. MPa. MPa. MPa.3 MPa MPa.3 MPa MHZ2-2/MHZL MHZ Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa MHZ2-1/MHZL Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZ2-2/MHZL MHZ Pressure.7 MPa. MPa. MPa. MPa.3 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa

10 eries MHZ election tep 1 Effective Gripping Force: eries MHZ2/ingle cting/internal Gripping Force Internal Gripping Force Internal Gripping Force Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F F Internal Grip MHZ2, MHZ2, MHZL2 L MHZ2-C/MHZ2-C 8 2 MHZ2-1C/MHZL2-1C Pressure.7 MPa Pressure.7 MPa. MPa. MPa. MPa. MPa. MPa.3 MPa. MPa.3 MPa MHZ2-2C/MHZL2-2C MHZ2-32C Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa MHZ2-1C/MHZL2-1C Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZ2-C Pressure.7 MPa. MPa. MPa. MPa.3 MPa MHZ2-2C/MHZL2-2C Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa

11 Parallel tyle ir Gripper eries MHZ tep 1 Effective Gripping Force: eries MHZ2/Double cting/external Gripping Force External Gripping Force External Gripping Force MHZJ2-D/MHZJ2-D MHZJ2-2D/11-MHZ2-2D Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F 2 Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa F External Grip MHZJ2, MHZJ2, 11-MHZ MHZJ2-1D/11-MHZ2-1D L 1 1 Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZJ2-1D/11-MHZ2-1D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZJ2-2D/11-MHZ2-2D Pressure.7 MPa 3 2. MPa. MPa. MPa.3 MPa.2 MPa

12 eries MHZ election tep 1 Effective Gripping Force: eries MHZ2/Double cting/internal Gripping Force Internal Gripping Force Internal Gripping Force Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F F Internal Grip MHZJ2, MHZJ2, 11-MHZ2 MHZJ2-D/MHZJ2-D 1 1 MHZJ2-1D/11-MHZ2-1D Pressure.7 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZJ2-2D/11-MHZ2-2D Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa L MPa. MPa. MPa.3 MPa.2 MPa MHZJ2-1D/11-MHZ2-1D Pressure.7 MPa 3 2. MPa. MPa. MPa.3 MPa.2 MPa MHZJ2-2D/11-MHZ2-2D 1 Pressure.7 MPa 8 2. MPa. MPa. MPa.3 MPa.2 MPa

13 Parallel tyle ir Gripper eries MHZ tep 1 Effective Gripping Force: eries MHZ2/ingle cting/external Gripping Force External Gripping Force External Gripping Force Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F F External Grip MHZJ2, MHZJ2 L MHZJ2-/MHZJ2- MHZJ Pressure.7 MPa Pressure.7 MPa. MPa. MPa. MPa. MPa. MPa.3 MPa MPa.3 MPa MHZJ Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa MHZJ2-1 Pressure.7 MPa MPa. MPa. MPa.3 MPa.2 MPa MHZJ2-2 Pressure.7 MPa MPa. MPa. MPa.3 MPa.2 MPa

14 eries MHZ election tep 1 Effective Gripping Force: eries MHZ2/ingle cting/internal Gripping Force Internal Gripping Force Internal Gripping Force Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as F, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. F F Internal Grip MHZJ2, MHZJ2 MHZJ2-C/MHZJ2-C 8 2 MHZJ2-1C 2 Pressure.7 MPa Pressure.7 MPa. MPa. MPa. MPa.3 MPa MHZJ2-2C Pressure.7 MPa. MPa. MPa. MPa.3 MPa.2 MPa L 1 1. MPa. MPa. MPa.3 MPa MHZJ2-1C Pressure.7 MPa 3 2. MPa. MPa. MPa.3 MPa 1.2 MPa MHZJ2-2C 1 8 Pressure.7 MPa. MPa. MPa. MPa.3 MPa 2.2 MPa

15 Parallel tyle ir Gripper eries MHZ tep 2 Confirmation of Gripping Point: eries MHZ/External Grip External Grip External Grip MHZ2, 11-MHZ2 MHZ2- External Grip MHZ2-2/11-MHZ2-2 H Gripping point L Overhang H (mm) Pressure.2 MPa.3 MPa. MPa. MPa. MPa.7 MPa Overhang H (mm) 1 8 Pressure.2 MPa.3 MPa. MPa. MPa. MPa.7 MPa MHZJ2, MHZJ H MHZ2-1/11-MHZ2-1 MHZ2-32 Gripping point L The air gripper should be operated so that the workpiece gripping point L and the amount of overhang H stay within the range shown for each operating pressure given in the graphs to the right. If the workpiece gripping point goes beyond the range limits, this will have an adverse effect on the life of the air gripper. Overhang H (mm) Pressure.2 MPa.3 MPa. MPa. MPa. MPa,.7 MPa MHZ2-1/11-MHZ2-1 Overhang H (mm) Pressure.2 MPa.3 MPa. MPa. MPa 1 1 MHZ2-. MPa.7 MPa Overhang H (mm) Pressure.2 MPa.3 MPa. MPa. MPa. MPa,.7 MPa Overhang H (mm) 1 1 Pressure.2 MPa.3 MPa. MPa. MPa. MPa.7 MPa MHZ2-2/11-MHZ2-2 1 Overhang H (mm) 8 2 Pressure.2 MPa.3 MPa. MPa. MPa. MPa.7 MPa

16 eries MHZ election tep 2 Confirmation of Gripping Point: eries MHZ/Internal Grip Internal Grip Internal Grip MHZ2, 11-MHZ2 MHZ2- Internal Grip MHZ2-2/11-MHZ2-2 1 H H Gripping point Gripping point L MHZJ2, MHZJ2 L The air gripper should be operated so that the workpiece gripping point L and the amount of overhang H stay within the range shown for each operating pressure given in the graphs to the right. If the workpiece gripping point goes beyond the range limits, this will have an adverse effect on the life of the air gripper. Overhang H (mm) MPa. MPa. MPa. MPa,.7 MPa MPa. MPa.3 MPa. MPa. MPa. MPa,.7 MPa. MPa. MPa.7 MPa MHZ2-1/11-MHZ2-1 Overhang H (mm) Overhang H (mm) Pressure.2 MPa Pressure.2 MPa MHZ2-1/11-MHZ2-1 Pressure.2 MPa Overhang H (mm) Overhang H (mm) MPa. MPa. MPa. MPa MHZ MHZ2- Overhang H (mm) 1 8 Pressure.2 MPa Pressure.2 MPa.3 MPa. MPa. MPa. MPa.7 MPa Pressure.2 MPa.3 MPa. MPa. MPa.7 MPa.7 MPa. MPa MHZ2-2/11-MHZ Overhang H (mm) 2.3 MPa. MPa. MPa Pressure.2 MPa. MPa.7 MPa 2 8 3

17 Parallel tyle ir Gripper eries MHZ tep 3 Confirmation of External Force on Fingers: eries MHZ2 L L Mp My Mr Fv L L: Distance to the point at which the load is applied (mm) Maximum allowable moment llowable vertical load Pitch moment: Yaw moment: Roll moment: Fv (N) Mp (N m) My (N m) Mr (N m) MHZ2- MHZ2-1 MHZ2-1 MHZ2-2 MHZ2-2 MHZ2-32 MHZ Note) Values for load and moment in the table indicate static values. Calculation of allowable external force (when moment load is applied) llowable load F (N) = M (maximum allowable moment)(n m) L x 1 3 ( : Constant for unit conversion) Calculation example When a static load of f = 1 N is operating, which applies pitch moment to point L = 3 mm from the MHZ2-1D guide. Therefore, it can be used..8 llowable load F = 3 x 1 3 = 22.7 (N) Load f = 1 (N) < 22.7 (N) 31

18 Parallel tyle ir Gripper (tandard) Compact eries (Without uto witch) eries MHZ2-/MHZJ2- ø How to Order MHZ 2 MHZJ 2 With dust cover Number of fingers 2 2 fingers D C Bore size mm [tandard] Nil: Basic type ction D D Double acting ingle acting (Normally open) ingle acting (Normally closed) Finger option Dust cover type Nil F Body option Nil: Basic type Port Made to Order Refer to page 33 for details. Chloroprene rubber (CR) Fluororubber (FKM) ilicone rubber (i) E: End boss type K: End boss type ide ported xial ported (Double acting/ingle acting) with ø One-touch fitting (ingle acting) Port Port 1: ide tapped mounting H: End boss type xial ported with ø hose nipple (ingle acting) Port M: End boss type xial ported with M3 port (ingle acting) Port 2: Through-holes in opening/closing direction 3: Flat type fingers 32

19 Parallel tyle ir Gripper/Compact eries eries MHZ2-/MHZJ2- pecifications Operating pressure Fluid Double acting ingle acting mbient and fluid temperature Repeatability Max. operating frequency Lubrication ction Normally open Normally closed ir.1 to.7 MPa.3 to.7 MPa 1 to C ±.1 mm 18 c.p.m. Not required Double acting/ingle acting Use the gripper with dust cover when used in a place where there may be dust. ymbol Double acting: Internal grip Double acting: External grip ingle acting/ Normally closed: Internal grip ingle acting/ Normally open: External grip ymbol -X -X -X -X3 -X -X3 -X -X -X79 -X79 -X81 -X81B Made to Order (Refer to pages 727 to 79 for details.) pecifications/description Heat resistance (1 C) Fluororubber seal Opening direction spring assist EPDM seal/fluorine grease xial ported type Fluorine grease Finger: ide tapped mounting Finger: Through-hole mounting Grease for food processing machines, Fluorine grease Grease for food processing machines nti-corrosive treatment of finger nti-corrosive treatment of finger and guide ction Double acting ingle acting Normally open Normally closed Option MHZ2-D MHZJ2-D MHZ2- MHZJ2- MHZ2-C MHZJ2-C Bore size (mm) Body Option/End Boss Type ymbol Piping port location Gripping force Note) Gripping force per finger Effective value (N) External Internal Moisture Control Tube eries IDK Opening/ Closing Weight (Both sides) (g) (mm) Note) Values based on pressure of. MPa, gripping point L = 2 mm, at center of stroke. Nil E K H M Basic type ide ported xial ported Type of piping port MHZ2-/MHZJ2- M3 x. M3 x. With ø One-touch fitting With ø hose nipple M3 x pplicable model Double acting ingle acting When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. imply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. For details, refer to eries IDK in the WEB catalog. 33 MHZ MHF MHL MHR MHK MH MHC MHT -Z B MHY MHW -X MRHQ M D-

20 eries MHZ2-/MHZJ2- Construction: tandard Type MHZ2- Double acting/with fingers open!2 e i!1 ingle acting/normally open!7!! t r!3 ingle acting/normally y Double acting/with fingers closed Component Parts Component Parts No. Description Material Note No. Description Material Note Body Piston Lever Guide Finger Roller stopper Lever shaft Holder Holder lock Cap Bumper teel balls Needle roller luminum alloy Brass luminum alloy Urethane rubber High carbon chrome bearing steel High carbon chrome bearing steel Hard anodized Heat treated Heat treated Heat treated Nitriding Electroless nickel plated Clear anodized Type C retaining ring Exhaust plug Exhaust filter N.O. spring N.C. spring N.C. holder N.C. spacer Rod seal Piston seal Gasket Gasket Carbon steel Brass Polyvinyl formal spring wire spring wire Brass NBR NBR NBR NBR Phosphate coated Electroless nickel plated Electroless nickel plated Replacement Parts Description MHZ2- Main parts Finger assembly Please contact MC to replace the seal kit and finger assembly. MHZ2-H MHZ-7 Main body of adaptor MHZ2-K MHZ-8 End boss assembly Mounting screw for adaptor MHZ2-M MHZ-9 eal MHZ2-E MHZ-1 The end boss assembly other than type E should be mounted on the special body. Replacement part/grease pack part no.: GR--1 (1 g) 3

21 Parallel tyle ir Gripper/Compact eries eries MHZ2-/MHZJ2- Construction: With Dust Cover MHZJ2- Double acting/with fingers open!2 e i!1 ingle acting/normally open!8!7! t! r y ingle Double acting/with fingers closed Component Parts No Description Body Piston Lever Guide Finger Roller stopper Lever shaft Holder Holder lock Cap Bumper teel balls Needle roller Material luminum alloy Brass luminum alloy Urethane rubber High carbon chrome bearing steel High carbon chrome bearing steel Replacement Parts Description MHZJ2- Main parts eal kit Dust cover Finger assembly End boss assembly Material CR FKM i MHZ2-H MHZ2-K MHZ2-M MHZ2-E Note Hard anodized Heat treated Heat treated Heat treated Nitriding Electroless nickel plated Clear anodized Component Parts No Please contact MC to replace the seal kit. MHZJ2-J MHZJ2-JF! MHZJ2-J Please contact MC to replace the finger assembly. MHZ-7 MHZ-8 MHZ-9 MHZ-1 End boss type H = With hose nipple, K = With One-touch fitting, M = With M3 port, E = ide ported The end boss assembly other than type E should be mounted on the special body. Replacement part/grease pack part no.: GR--1 (1 g) Description Dust cover Main body of adaptor Mounting screw for adaptor eal Type C retaining ring Exhaust plug Exhaust filter N.O. spring N.C. spring N.C. holder N.C. spacer Rod seal Piston seal Gasket Gasket Material Note CR Chloroprene rubber FKM Fluororubber i ilicon rubber Carbon steel Phosphate coated Brass Electroless nickel plated Polyvinyl formal spring wire spring wire Brass Electroless nickel plated NBR NBR NBR NBR 3

22 eries MHZ2-/MHZJ2- Construction: tandard Type MHZ2- Double acting/ingle acting Basic type 2 x M2 x. thread depth.1 2 x M3 x. through Prepared hole dia. 2. through (Mounting hole) Max. 1.2 When open ±1 When closed ±. 2 x M2 x. thread depth ø7h8 depth 1. M3 x. (Finger closing port). x M2 x. through (Thread for mounting attachment) M3 x. (Finger opening port) For single action, the port on one side is a breathing hole. 3

23 Parallel tyle ir Gripper/Compact eries eries MHZ2-/MHZJ2- Dimensions: With Dust Cover MHZJ2- Double acting/ingle acting Basic type 1 ±. (1) 2 x M2 x. thread depth 2 x M3 x. through Prepared hole dia. 2. through (Mounting hole) (28) When open ±1 When closed x M2 x. thread depth ø7h8 depth 1. M3 x. (Finger closing port). x M2 x. through (Thread for mounting attachment) M3 x. (Finger opening port) For single action, the port on one side is a breathing hole. 37

24 eries MHZ2- Finger Option ide Tapped Mounting [1] x M2 x. through Thread for mounting attachment Through-holes in Opening/Closing Direction [2] pecifications and dimensions other than the above are the same as the basic type. x ø2. through Hole for mounting attachment 2. Flat Type Fingers [3] pecifications and dimensions other than the above are the same as the basic type x M2 x. thread depth 3 Thread for mounting attachment When open +.2 When closed Note) To mount attachments, use JIB111 type M2 round head screws. Be careful not to use commercially available M2 hexagon socket head cap bolt as its top diameter is large.. Weight: 2 g pecifications and dimensions other than the above are the same as the basic type.

25 pplicable eries MHZ2-/MHZJ2- Body Option: End Boss Type ymbol E H K M Piping port location ide ported xial ported Type of piping port MHZ2 MHZJ2 M3 x. With ø hose nipple With ø One-touch fitting M3 x. pplicable model Double acting ingle acting ide Ported [E] MHZ2-E MHZJ2-E End boss assembly ø8f8 ø pecifications and dimensions other than the above are the same as the basic type. xial Ported (with hose nipple) [H] pecifications and dimensions other than the above are the same as the basic type or the end boss dimensions of the MHZ type. MHZ2- CH End boss assembly Hose nipple pplicable tubing ø MHZJ2- CH ø2. ø8f8 ø ø pecifications and dimensions other than the above are the same as the basic type. pplicable Tubing pecifications Description/ Nylon tubing T2 oft nylon tubing T2 Outside diameter (mm) Max. operating pressure (MPa) Min. bending radius (mm) Operating temperature ( C) Material to Nylon.8 2 to Nylon Refer to Best Pneumatics No. regarding One-touch fittings and tubing. pecifications and dimensions other than the above are the same as the basic type or the end boss dimensions of the MHZ type. Polyurethane tubing Polyurethane coil tubing TU2 TCU2B to 2 to Polyurethane Polyurethane 39

26 eries MHZ2-/MHZJ2- xial Ported (with One-touch fitting) [K] MHZ2- CK MHZJ2- CK End boss assembly.13.3 pplicable tube ø 2 ø8f8 Max pplicable Tubing Description/ pecifications Outside diameter (mm) Max. operating pressure (MPa) Min. bending radius (mm) Operating temperature ( C) Material xial Ported (with M3 port) [M] M3 x. Piping port 2 ø7.8 ø7.8 pecifications and dimensions other than the above are the same as the basic type. Nylon tubing T to Nylon oft nylon tubing T2.8 2 to Nylon Refer to Best Pneumatics No. regarding One-touch fittings and tubing. Polyurethane tubing TU to Polyurethane pecifications and dimensions other than the above are the same as the basic type or the end boss dimensions of the MHZ type. Polyurethane coil tubing TCU2B-1. 2 to Polyurethane MHZ2- CM MHZJ2- C M End boss assembly ø8f pecifications and dimensions other than the above are the same as the basic type. Weight pecifications and dimensions other than the above are the same as the basic type or the end boss dimensions of the MHZ type. (g) E H End boss type (ymbol) K M MHZ MHZJ

27 Parallel tyle ir Gripper/tandard Type eries MHZ2 ø, ø1, ø1, ø2, ø2, ø32, ø How to Order Bore size ø MHZ2 D M9BW Number of fingers 2 2 fingers Made to Order Refer to page for details. D C Bore size mm ction Double acting ingle acting (Normally open) ingle acting (Normally closed) Number of auto switches Nil 2 pcs. 1 pc. uto switch Nil Without auto switch (Built-in magnet) For the applicable auto switch model, refer to the table below. Finger option [tandard] Nil: Basic type pplicable uto witches/refer to pages 87 to 8 for further information on the auto switch. Type olid state auto switch pecial function 1: ide tapped mounting Electrical entry Grommet Indicator light Yes 2: Through-holes in opening/closing direction Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 2 V DC V, V V Moisture Control Tube eries IDK When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. imply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. For details, refer to eries IDK in the WEB catalog. Diagnosis V, V (2-color 3-wire (PNP) indicator) 2-wire V Water resistant 3-wire (NPN) V, V (2-color 3-wire (PNP) indicator) 2-wire V M9BV M9B Water resistant type auto switches can be mounted on the above models, but in such case MC cannot guarantee water resistance. olid state auto switches marked with are produced upon receipt of order. Lead wire length symbols:. m Nil (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL m Z (Example) M9NWZ Load voltage C 3: Flat type fingers uto switch model Electrical entry direction Perpendicular M9NV F8N M9PV F8P M9BV F8B M9NWV M9PWV M9BWV M9NV M9PV In-line M9N M9P M9B M9NW M9PW M9BW M9N M9P Lead wire length (m). (Nil) 1 (M) 3 (L) (Z) Pre-wired connector pplicable load IC circuit IC circuit IC circuit Relay, PLC MHZ MHF MHL MHR MHK MH MHC MHT -Z MHY MHW -X MRHQ M D- Note 1) When using a D-F8 switch, mount it at a distance of 1 mm or more from magnetic substances such as iron, etc. Note 2) When using the 2-color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. 1 B

28 eries MHZ2 How to Order Bore size ø1 to ø2 MHZ2 1 D M9BW Number of fingers 2 2 fingers Made to Order Refer to page for details. Bore size 1 1 mm 1 1 mm 2 2 mm 2 2 mm D C ction Double acting ingle acting (Normally open) ingle acting (Normally closed) uto switch Nil Without auto switch (Built-in magnet) For the applicable auto switch model, refer to the table below. Number of auto switches Nil 2 pcs. 1 pc. n n pc. tandard (MHQG2 compatible type) Nil: Basic type Finger position/option Narrow type (MHQ2 compatible type) N: Basic type Body option Nil: Basic type Port E: End boss type ide ported (Double acting/ ingle acting) W: End boss type xial ported ø One-touch fitting for coxial tubing (Double acting) Port 1: ide tapped mounting N1: ide tapped mounting Port 2: Through-holes in opening/ closing direction N2: Through-holes in opening/ closing direction 3: Flat type fingers The flat type fingers do not have standard and narrow options. When MHQG2/MHQ2 compatible types are required, see the -X1 made-to-order specifications on page 7. K: End boss type xial ported with ø One-touch fitting (ingle acting) Port M: End boss type xial ported with M port (ingle acting) Port pplicable uto witches/refer to pages 87 to 8 for further information on the auto switch. Type pecial function Electrical uto switch model Lead wire length (m) Indicator Wiring Load voltage pplicable model Pre-wired Electrical entry direction entry light (Output). 1 3 ø1 ø1 ø2 ø2 connector DC C Perpendicular In-line (Nil) (M) (L) (Z) M9NV M9N 3-wire (NPN) F8N V, V M9PV M9P 3-wire (PNP) F8P M9BV M9B 2-wire V F8B Grommet Yes 2 V Diagnosis 3-wire (NPN) M9NWV M9NW V, V (2-color 3-wire (PNP) M9PWV M9PW indicator) 2-wire V M9BWV M9BW Water resistant 3-wire (NPN) M9NV M9N V, V (2-color 3-wire (PNP) M9PV M9P indicator) 2-wire V M9BV M9B Water resistant type auto switches can be mounted on the above models, but in such case MC cannot guarantee water resistance. olid state auto switches marked with Lead wire length symbols:. m Nil (Example) M9NW 1 m M (Example) M9NWM 3 m L (Example) M9NWL are produced upon receipt of order. Moisture Control Tube eries IDK m Z (Example) M9NWZ olid state auto switch Note 1) When using the 2-color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note 2) Through-hole mounting is not possible when using the auto switch at the square groove on the side. Note 3) When the product is ordered with auto switch, only MHZ2-1 is shipped with the auto switch mounting brackets. When the auto switch is used at the square groove on the side with MHZ2-1 to 2, mounting brackets (BMG2-) are required. Pease order them separately. Refer to page 83 for the auto switch mounting brackets. 2 pplicable load IC circuit IC circuit When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. imply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. For details, refer to eries IDK in the WEB catalog. IC circuit Relay, PLC

29 Parallel tyle ir Gripper/tandard Type eries MHZ2 How to Order Bore size ø32 to ø MHZ2 32 D M9BW Number of fingers 2 2 fingers Made to Order Refer to page for details. Finger option [tandard] Nil: Basic type D C Bore size mm mm ction Double acting ingle acting (Normally open) ingle acting (Normally closed) Number of auto switches Nil 2 pcs. 1 pc. n n pc. uto switch Nil Without auto switch (Built-in magnet) For the applicable auto switch model, refer to the table below. 1: ide tapped mounting 2: Through-holes in opening/ closing direction 3: Flat type fingers pplicable uto witches/refer to pages 87 to 8 for further information on the auto switch. Type olid state auto switch pecial function Diagnosis (2-color indicator) Water resistant (2-color indicator) Electrical entry Grommet Indicator light Yes Wiring (Output) 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 2 V Load voltage DC V, V V V, V V V, V V C uto switch model Lead wire length (m) Electrical entry direction. 1 3 Perpendicular In-line (Nil) (M) (L) (Z) M9NV F8N M9PV F8P M9BV F8B M9NWV M9PWV M9BWV M9NV M9PV M9BV M9N M9P M9B M9NW M9PW M9BW M9N M9P M9B Pre-wired connector Water resistant type auto switches can be mounted on the above models, but in such case MC cannot guarantee water resistance. Lead wire length symbols:. m Nil (Example) M9NW olid state auto switches marked with are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL m Z (Example) M9NWZ pplicable load IC circuit IC circuit Note 1) When using the 2-color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note 2) Through-hole mounting is not possible when using the auto switch at the square groove on the side. Note 3) When the auto switch is used at the square groove on the side with MHZ2-32 and, mounting brackets (BMG2-) are required. Please order them separately. Refer to page 83 for the auto switch mounting brackets. IC circuit Relay, PLC 3

30 eries MHZ2 B ø ø1 to ø2 ø32, ø ymbol Double acting: Internal grip ingle acting/ Normally closed: Internal grip Refer to pages 8 to 8 for the specifications with auto switch. uto switch installation examples and mounting positions uto switch hysteresis uto switch mounting Protrusion of auto switch from edge of body ymbol -X -X1 ymbol -X -X -X7 -X -X -X3 -X -X3 -X79 -X79 -X81 -X81B Double acting: External grip ingle acting/ Normally open: External grip Made to Order: Individual pecifications (For details, refer to pages 8-1 and 8-2.) pecifications/description With flow control MHQ2/MHQG2-compliant finger flat type Made to Order (Refer to pages 727 to 79 for details.) pecifications/description Heat resistance (1 C) Fluororubber seal Closing direction spring assist Opening direction spring assist Without magnet EPDM seal/fluorine grease xial ported type Fluorine grease Grease for food processing machines, Fluorine grease Grease for food processing machines nti-corrosive treatment of finger nti-corrosive treatment of finger and guide pecifications Fluid ir ø:.1 to.7 MPa Double acting ø1:.2 to.7 MPa Operating ø1 to ø:.1 to.7 MPa pressure ingle Normally open ø:.3 to.7 MPa acting ø1:.3 to.7 MPa Normally closed ø1 to ø:.2 to.7 MPa mbient and fluid temperature 1 to C ø to ø2: ±.1 mm Repeatability ø32, ø: ±.2 mm ø to ø2: 18 c.p.m. Max. operating frequency ø32, ø: c.p.m. Lubrication Not required ction Double acting/ingle acting uto switch (Option) Note) olid state auto switch (3-wire, 2-wire) Note) Refer to pages 87 to 8 for further information on auto switches. Use the gripper with dust cover when used in a place where there may be dust. ction Double acting ingle acting Normally closed Normally open Option MHZ2-D MHZ2-1D(N) MHZ2-1D(N) MHZ2-2D(N) MHZ2-2D(N) MHZ2-32D MHZ2-D MHZ2- MHZ2-1(N) MHZ2-1(N) MHZ2-2(N) MHZ2-2(N) MHZ2-32 MHZ2- MHZ2-C MHZ2-1C(N) MHZ2-1C(N) MHZ2-2C(N) MHZ2-2C(N) MHZ2-32C MHZ2-C Bore size (mm) Gripping force Note 1) Gripping force per finger Effective value (N) External Internal Opening/ Closing stroke (Both sides) (mm) Note 1) Values based on pressure of. MPa, gripping point L = 2 mm, at center of stroke. Note 2) Values excluding weight of auto switch. Note 2) Weight (g) Body Option/End Boss Type ymbol Piping port Type of piping port pplicable model location MHZ2- MHZ2-1 MHZ2-1 MHZ2-2 MHZ2-2 MHZ2-32 MHZ2- Double acting ingle acting Nil Basic type M3 x. M x.8 E ide ported M3 x. M x.8 W K M xial ported xial ported xial ported With ø One-touch fitting for coaxial tubing With ø One-touch fitting M x.8 For detailed body option specifications, refer to option specifications on pages and 7.

31 Parallel tyle ir Gripper/tandard Type eries MHZ2 Clean eries: ir Gripper pecifications Clean eries 11-: Vacuum type 11 MHZ2 D M9BW Number of auto switches uto switch Bore size Nil Without auto switch (Built-in magnet) For the applicable auto switch model, refer to the 1 1 mm ction table below. 1 1 mm 2 2 mm D Double acting Finger position/option 2 2 mm Refer to How to Order on page 2. pplicable uto witches/refer to pages 87 to 8 for further information on the auto switch. uto switch model Lead wire length (m) Type pecial Electrical Indicator Wiring Load voltage Electrical entry direction Pre-wired function entry light. (Output) 1 3 connector DC C Perpendicular In-line (Nil) (M) (L) (Z) M9NV M9N 3-wire (NPN) V, V F8N IC M9PV M9P circuit 3-wire (PNP) F8P V M9BV M9B 2-wire 2 V F8B Grommet Yes Diagnosis 3-wire (NPN) V, V M9NWV M9NW IC (2-color 3-wire (PNP) M9PWV M9PW circuit indicator) 2-wire V M9BWV M9BW Water resistant 3-wire (NPN) M9NV M9N V, V IC (2-color 3-wire (PNP) M9PV M9P circuit indicator) 2-wire V M9BV M9B Water resistant type auto switches can be mounted on the above models, but in such case MC cannot guarantee water resistance. Lead wire length symbols:. m Nil (Example) M9NW olid state auto switches marked with are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL m Z (Example) M9NWZ olid state auto switch pplicable load Note 1) When using the 2-color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note 2) When using a D-F8 switch, mount it at a distance of 1 mm or more from magnetic substances such as iron, etc. Note 3) For 11-MHZ2-1D, the through-hole mounting cannot be made when using the auto switch. Note ) Two extension fitting assemblies (P331117) are supplied with 11-MHZ2-1D. Please use them if the fitting interferes with the auto switch. Relay, PLC Fluid Operating pressure mbient and fluid temperature Repeatability Max. operating frequency Lubrication ction Particulate generation grade uto switch (Option) ir ø1:.2 to.7 MPa ø1 to ø2:.1 to.7 MPa 1 to C ±.1 mm 18 c.p.m. Not required Double acting Grade 2 olid state auto switch (3-wire, 2-wire) Vacuum port The concentrated vacuuming of internally generated particulates prevents them from spreading into the clean room. For details, refer to Pneumatic Clean eries catalog.

32 eries MHZ2 Construction: MHZ2- Double acting/with fingers open ingle acting/normally open! o!2 w t r! ingle acting/normally y Double acting/with fingers closed Component Parts Component Parts No. Description Material Note No. Description Material Note Body Piston Lever Guide Finger Roller stopper Lever shaft Magnet holder Holder Holder lock Cap Bumper Magnet luminum alloy Brass luminum alloy Urethane rubber Hard anodized Heat treated Heat treated Heat treated Nitriding Electroless nicked plated Clear anodized Nickel plated teel balls Needle roller Type C retaining ring Exhaust plug Exhaust filter N.O. spring N.C. spring Rod seal Piston seal Gasket Gasket High carbon chrome bearing steel High carbon chrome bearing steel Carbon steel Brass Polyvinyl formal spring wire spring wire NBR NBR NBR NBR Phosphate coated Electroless nickel plated Replacement Parts Description Finger assembly MHZ2-D Piston assembly MHZ2- MHZ2-C MHZ2- MHZ-3 MHZ-3C Main parts Please contact MC to replace the seal kit and finger assembly. wio!!2!3!@1@2@3 wio!!2!3!@@1@2@3 Replacement part/grease pack part no.: GR--1 (1 g)

33

34 eries MHZ2 Construction: MHZ2-1 to 2 Double acting/with fingers open ingle acting/normally open y r u!oqi!1!2!8!7!! ingle acting/normally closed!9 Double acting/with fingers closed B Component Parts No. Description 1 Body 2 Piston Lever Guide Finger Roller stopper Lever shaft eal support Rod cover Cap Bumper Replacement Parts eal kit Finger assembly Piston assembly End boss assembly Description MHZ2-D MHZ2-C Material Note luminum alloy Hard anodized ø1, ø1: ø2, ø2: Hard anodized ø2, ø2: luminum alloy Nitriding Heat treated Heat treated Nitriding ynthetic resin ynthetic resin ingle acting/normally open only Urethane rubber MHZ2- MHZ2-(N) MHZ2-(N)1 MHZ2-(N)2 MHZ2-3 MHZ2-D MHZ2- MHZ2-C MHZ2-DW MHZ2-K MHZ2-M MHZ2-E MHZ2-1 MHZ1-P MHZ1-P MHZ-(N) MHZ-(N)-1 MHZ-(N)-2 MHZ--3 MHZ-13 MHZ-17 MHZ-18 MHZ-19 MHZ-11 MHZ-1 Lever assembly Finger option 1 = ide tapped, 2 = Through-hole, 3 = Flat type fingers End boss type MHZ2-1 MHZ1-P MHZ1-P MHZ-(N) MHZ-(N)-1 MHZ-(N)-2 MHZ--3 MHZ-13 MHZ-17 MHZ-18 MHZ-19 MHZ-11 MHZ-1 W = One-touch-fitting for coaxial tubing, K = With One-touch fitting, M = With M port, E = ide ported The end boss assembly other than type E should be mounted on the special body. -1 MHZ2-P MHZ2-P MHZ-22(N) MHZ-22(N)-1 MHZ-22(N)-2 MHZ-22-3 MHZ-23 MHZ-27 MHZ-28 MHZ-29 MHZ-21 MHZ-2 MHZ2-P MHZ2-P MHZ-22(N) MHZ-22(N)-1 MHZ-22(N)-2 MHZ-22-3 MHZ-23 MHZ-27 MHZ-28 MHZ-29 MHZ-21 rty!3 Mounting screw w!1!2! Main body of adaptor Mounting screw for adaptor eal e Replacement part/grease pack part no.: GR--1 (1 g) MHZ Component Parts No. Description Material Note Rubber magnet teel balls Needle roller Type C retaining ring Exhaust plug Exhaust filter N.O. spring N.C. spring Rod seal Piston seal Gasket ynthetic rubber High carbon chrome bearing steel High carbon chrome bearing steel Carbon steel Brass Polyvinyl formal spring wire spring wire NBR NBR NBR Phosphate coated ingle acting/normally open only Electroless nickel plated MHT -Z MHZ2-2 MHZ2-2 Main parts MHF MHL MHR MHK MH MHC MHY MHW -X MRHQ M D-

35 Parallel tyle ir Gripper/tandard Type eries MHZ2 Construction: MHZ2-32 to Double acting/with fingers open!1 ingle acting/normally open t r!2 u y!3 q o! i!7!! ingle acting/normally closed!8 Double acting/with fingers closed Component Parts No Description Body Piston Lever Guide Finger Roller stopper Lever shaft Cap Bumper Rubber magnet teel balls Replacement Parts eal kit Description Material luminum alloy luminum alloy luminum alloy Urethane rubber ynthetic rubber High carbon chrome bearing steel MHZ2-32 MHZ32-P MHZ-322 MHZ MHZ MHZ MHZ-323 Note Hard anodized Hard anodized Heat treated Heat treated Heat treated Nitriding Clear anodized No MHZ2- MHZ-P MHZ-2 MHZ-2-1 MHZ-2-2 MHZ-2-3 MHZ-3 Component Parts Description Needle roller Parallel pin Type C retaining ring Exhaust plug Exhaust filter N.O. spring N.C. spring Rod seal Piston seal Gasket Main parts!9@@1 MHZ2-(N) Finger assembly MHZ2-(N)1 rty!1!3 MHZ2-(N)2 Mounting screw MHZ2-3 MHZ2-D Piston assembly MHZ2- wo!!2 MHZ-323 MHZ-3 MHZ2-C Lever assembly MHZ-32 MHZ- e Finger option Replacement part/grease pack part no.: GR--1 (1 g) 1 = ide tapped, 2 = Through-hole, 3 = Flat type fingers Material High carbon chrome bearing steel Carbon steel Brass Polyvinyl formal spring wire spring wire NBR NBR NBR Note Phosphate coated Electroless nickel plated MHZ MHF MHL MHR MHK MH MHC MHT -Z MHY MHW -X MRHQ M D- 7 C

36 eries MHZ2 Dimensions MHZ2- Double acting/ingle acting Basic type Use series MHZJ2 with a dust cover when used in a place where there may be dust x M3 x. through Prepared hole dia. 2. through (Mounting hole) Max. 1.2 When open ±1 When closed ø7h depth 1. 1 ±. M3 x. (Finger closing port). x M2 x. through (Thread for mounting attachment) M3 x. (Finger opening port) 1. uto witch Mounting Groove Dimensions uto switch mounting groove 2. For single action, the port on one side is a breathing hole. ø 8

37 Parallel tyle ir Gripper/tandard Type eries MHZ2 MHZ2-1 Double acting/ingle acting Basic type 27 Use series MHZJ2 with a dust cover when used in a place where there may be dust x M3 x. thread depth.1 x M3 x. thread depth. Prepared hole dia. 2. through (Mounting hole) Note) +.2 ø2h9 ( ) depth 3.2 ± When open When closed ±.2. x M2. x. through (Thread for mounting attachment) 3.7 Finger Position/Narrow Type MHZ2-1N Note) When using auto switches, throughhole mounting is not possible. 19 M3 x. (Finger closing port) 9 M3 x. (Finger opening port) For single action, the port on one side is a breathing hole ø11h9 ( ) depth 2 1. ±. 2 x M3 x. thread depth uto witch Mounting Groove Dimensions.2 uto switch mounting groove (Both sides). Note) When using auto switches, throughhole mounting is not possible. MHZ MHF MHL MHR MHK MH MHC When open 9.7 When closed.7 MHT -Z MHY MHW -X MRHQ M D- 9 B

38 eries MHZ2 Dimensions MHZ2-1 Double acting/ingle acting Basic type 3 Use series MHZJ2 with a dust cover when used in a place where there may be dust x M x.7 thread depth..1 x M x.7 thread depth 8 Prepared hole dia. 3. through (Mounting hole) Note) +.2 ø3h9 ( ) depth 3.±.2 11± When open When closed Note) Through-hole mounting is not possible when using the auto switch at the square groove ±. 2 x M x.7 thread depth ø17h9 ( ) depth 2 x M3 x. through (Thread for mounting attachment) M x.8 (Finger closing port) M x.8 (Finger opening port) For single action, the port on one side is a breathing hole. 13 uto witch Mounting Groove Dimensions.2 uto switch mounting groove (Both sides) ø Finger Position/Narrow Type MHZ2-1N When open.. When closed. 2.1 Note) Through-hole mounting is not possible when using the auto switch at the square groove. B

39 Parallel tyle ir Gripper/tandard Type eries MHZ2 MHZ2-2 Double acting/ingle acting Basic type Use series MHZJ2 with a dust cover when used in a place where there may be dust x M x.8 thread depth x M x.8 thread depth 1 Prepared hole dia..3 through (Mounting hole) Note) +.3 øh9 ( ) depth 7.± When open ±.2.7 When closed Finger Position/Narrow Type MHZ2-2N Note) Through-hole mounting is not possible when using the auto switch at the square groove. x M x.7 through (Thread for mounting attachment) 29 M x.8 (Finger closing port) M x.8 (Finger opening port) For single action, the port on one side is a breathing hole ø ±. 2 x M x.8 thread depth 1 uto witch Mounting Groove Dimensions ø21h9 ( ) depth 3 uto switch mounting groove (Both sides) 9 MHZ MHF MHL MHR MHK MH MHC MHT -Z MHY MHW -X MRHQ M D When open When closed 7.2 Note) Through-hole mounting is not possible when using the auto switch at the square groove. 1 B

40 ø eries MHZ2 Dimensions MHZ2-2 Double acting/ingle acting Basic type Use series MHZJ2 with a dust cover when used in a place where there may be dust x M x 1 thread depth x M x 1 thread depth Prepared hole dia..1 through (Mounting hole) Note) +.3 øh9 ( ) depth 1± ± When open When closed Note) Through-hole mounting is not possible when using the auto switch at the square groove ±. 2 x M x 1 thread depth +.2 ø2h9 ( ) depth 3. x M x.8 through (Thread for mounting attachment) M x.8 (Finger closing port) M x.8 (Finger opening port) For single action, the port on one side is a breathing hole. 2 uto witch Mounting Groove Dimensions.2 uto switch mounting groove (Both sides) Finger Position/Narrow Type MHZ2-2N When open When closed 8.8 Note) Through-hole mounting is not possible when using the auto switch at the square groove. B 2

41 Parallel tyle ir Gripper/tandard Type eries MHZ2 MHZ2-32 Double acting/ingle acting Basic type 8 (7) The values inside ( ) are dimensions for the single acting type. x M x 1 through (Thread for mounting attachment) (37) x M x 1 thread depth øh9 depth.1 x M x 1 thread depth13 Prepared hole dia..1 through (Mounting hole) Note) ± When open ±.2 When closed (7) 113 (2) (9) Note) Through-hole mounting is not possible when using the auto switch at the square groove. 2 ±.1 2 x M x 1 thread depth ø3h9 depth M x.8 (Finger closing port) M x.8 (Finger opening port) 1. 2 uto witch Mounting Groove Dimensions.2 uto switch mounting groove Note) For single action, the port on one side is a breathing hole. ø uto switch mounting groove 3.3 Note) Through-hole mounting is not possible when using the auto switch at the square groove. 3

42 eries MHZ2 Dimensions MHZ2- Double acting/ingle acting Basic type 8 (71) The values inside ( ) are dimensions for the single acting type x M8 x 1.2 thread depth 13 øh9 +.3 depth 1.1 x M8 x 1.2 thread depth 1 Prepared hole dia.. through (Mounting hole) Note) 1 ± When open. When closed 3 29 ± ø2h9 depth (9) 139 () 9 (2) Note) Through-hole mounting is not possible when using the auto switch at the square groove ±.1 2 x M8 x 1.2 thread depth x M8 x 1.2 through (Thread for mounting attachment) 9 17 M x.8 (Finger closing port) 28 uto witch Mounting Groove Dimensions.2 uto switch mounting groove Note) M x.8 (Finger opening port) 38 () For single action, the port on one side is a breathing hole. ø uto switch mounting groove 3.7 Note) Through-hole mounting is not possible when using the auto switch at the square groove.

43 tandard Type/eries MHZ2 Finger Option ide Tapped Mounting [1/N1] x MM through (Thread for mounting attachment) Through-holes in Opening/ Closing Direction [2/N2] C C B x øh through (Hole for mounting attachment) O B O MHZ2-1 1 MHZ2-1 N1 1 MHZ2-1 N1 1 MHZ2-2 N1 1 MHZ2-2 N1 MHZ MHZ B C (mm) MM M2 x. M2. x. M3 x. M x.7 M x.8 M x 1 M8 x 1.2 pecifications and dimensions other than the above are the same as the basic type (including narrow type). Flat Type Fingers [3] MHZ2-2 2 MHZ2-1 N2 2 MHZ2-1 N2 2 MHZ2-2 N2 2 MHZ2-2 N2 MHZ MHZ B (mm) H pecifications and dimensions other than the above are the same as the basic type (including narrow type). x MM thread depth L (Thread for mounting attachment) B D G K J J B D K F C W O MHZ2-3 (1) MHZ2-13 (2)(3) MHZ2-13 (2)(3) MHZ2-23 (2)(3) MHZ2-23 (2)(3) MHZ2-323 MHZ B C D F G Open Closed J K 2H9 2.H9 3H9 H9 H9 H MM M2 x. M2. x. M3 x. M x.7 M x.8 M x 1 M8 x 1.2 L W (mm) Weight (g) (23) 1 (1) 7 (78) 133 (13) Note 1) To mount attachments, use JIB111 type M2 round head screws. Be careful not to use commercially available M2 hexagon socket head cap bolt as its top diameter is large. Note 2) pecifications and dimensions other than the above are the same as the basic type (including narrow type). Note 3) The overall length is the same as the MHQ(G) flat finger type. Note ) The values inside ( ) are for the single acting type.

44 pplicable tandard Type/eries MHZ2 Body Option: End Boss Type ymbol E W K M Piping port location ide ported xial ported Type of piping port pplicable model MHZ2-1 MHZ2-1 MHZ2-2 MHZ2-2 ingle acting Double acting Normally open Normally closed M3 x. M x.8 With ø One-touch fitting for coaxial tubing With ø One-touch fitting M x.8 ide Ported [E] End boss assembly uto switch mounting groove ( locations) (Except ø1) MHZ2-1E 1 B 7 D1 f8.1.3 D2 11 (mm) E 2.8 ød2 MHZ2-1E MHZ2-2E f8 2f ød1.2 MHZ2-2E 2 1 2f8.3 2 Other dimensions and specifications correspond to the standard type E B uto switch mounting groove (Both sides) Refer to the dimension table. When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. xial Ported (with One-touch fitting for coaxial tubing) [W] Plug ø1: M-3P ø1 to 2: M-P E pplicable coaxial tubing End boss assembly G F ød2 B ød1 uto switch mounting groove ( locations) (Except ø1) H Max. H uto switch mounting groove (Both sides) Refer to the dimension table. When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. Changing from Coaxial to ingle Tubing (mm) B D1 D2 E F G H MHZ2-1DW 1 7 f MHZ2-1DW 2 1 1f MHZ2-2DW 22 2f MHZ2-2DW 2 1 2f Other dimensions and specifications correspond to the standard type. pplicable Coaxial Tubing Reference symbol pecifications TWB-2 Outside diameter mm Max. operating pressure. MPa (External passage) Min. bending radius 1 mm (Internal passage) Operating temperature 2 to C Material Nylon Branch Tee, Different Diameter Tee, Branch Y, Male Run Tee Changing to single tubing is possible by using a branch Y or branch tee fitting. In this case particularly, single tube fittings and tube for ø3.2 will be necessary. Please contact MC for the coaxial fittings and tubing. Coaxial tubing Coaxial tubing Branch tee : KWT-23 Coaxial tubing ingle tubing Branch Y : KWU-23 ingle tubing Coaxial tubing ingle tubing ingle tubing ingle tubing ø3.2 Marking Finger opening side Marking Finger closing side

45 Parallel tyle ir Gripper/tandard Type eries MHZ2 xial Ported (with One-touch fitting) [K] Plug ø1 : M-3P ø1 to 2: M-P E pplicable tubing End boss assembly G Note 1) F Note 2) ød2 B ød1 Max. Refer to the dimension table. When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. Note 1) Normally open type plug position. Note 2) Normally closed type plug position. The plug is mounted on only one side for the single acting type. H H uto switch mounting groove (Both sides) uto switch mounting groove ( locations) (Except ø1) MHZ2-1 C K 1 B 7 D1.1 f8.3 D2 11 E 2.8 F 18 G 28.3 MHZ2-1 C K f MHZ2-2 C K f MHZ2-2 C K f Other dimensions and specifications correspond to the standard type. pplicable Tubing Description/ Nylon oft nylon Polyurethane tubing tubing tubing pecifications Outside diameter (mm) Max. operating pressure (MPa) Min. bending radius (mm) Operating temperature ( C) Material (mm) H Polyurethane coil tubing T2 T2 TU2 TCU2B to 2 to 2 to 2 to Nylon Nylon Polyurethane Polyurethane Refer to Best Pneumatics No. regarding One-touch fittings and tubing. xial Ported (with M Port) [M] (mm) Plug ø1 : M-3P ø1 to 2: M-P M x.8 Piping port End boss assembly G Note 1) ød2 ød1 uto switch mounting groove ( locations) (Except ø1) H B D1 D2 E F G.1 MHZ2-1 C M 1 7 f MHZ2-1 C M 2 1 1f MHZ2-2 C M 22 2f MHZ2-2 C M 2 1 2f Other dimensions and specifications correspond to the standard type. H E F Note 2) B H uto switch mounting groove (Both sides) Refer to the dimension table. When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. Note 1) Normally open type plug position. Note 2) Normally closed type plug position. The plug is mounted on only one side for the single acting type. Weight (g) MHZ2-1 MHZ2-1 MHZ2-2 MHZ2-2 E End boss type (ymbol) W K M

46 Parallel tyle ir Gripper/Long troke Type eries MHZL2 ø1, ø1, ø2, ø2 How to Order Nil: Basic type MHZL2 1 1: ide tapped mounting D Number of fingers 2 2 fingers Bore size 1 1 mm ction 1 1 mm D Double acting 2 2 mm ingle acting (Normally open) 2 2 mm C ingle acting (Normally closed) Finger option M9BW uto switch Nil Without auto switch (Built-in magnet) For the applicable auto switch model, refer to the table below. Body option Nil: Basic type Port E: End boss type ide ported (Double acting/ ingle acting) Made to Order Refer to page 9 for details. Number of auto switches Nil 2 pcs. 1 pc. n n pc. W: End boss type xial ported with ø One-touch fitting for coaxial tubing (Double acting) Port Port 2: Through-holes in opening/closing direction 3: Flat type fingers Port Port K: End boss type xial ported with ø One-touch fitting (ingle acting) M: End boss type xial ported with M port (ingle acting) pplicable uto witches/refer to pages 87 to 8 for further information on the auto switch. Type olid state auto switch pecial function Diagnosis (2-color indicator) Water resistant (2-color indicator) Electrical entry Grommet Indicator light Yes Wiring (Output) 3-wire (NPN) 3-wire (PNP) Load voltage DC V, V 2-wire V 2 V 3-wire (NPN) 3-wire (PNP) V, V 2-wire V 3-wire (NPN) 3-wire (PNP) 2-wire V, V V C uto switch model Electrical entry direction Perpendicular M9NV F8N M9PV F8P M9BV F8B M9NWV M9PWV M9BWV M9NV M9PV M9BV In-line M9N M9P M9B M9NW M9PW M9BW M9N M9P M9B Lead wire length (m). (Nil) 1 (M) 3 (L) (Z) pplicable model ø1 ø1 ø2 ø2 Pre-wired connector pplicable load IC circuit IC circuit Water resistant type auto switches can be mounted on the above models, but in such case MC cannot guarantee water resistance. Lead wire length symbols:. m Nil (Example) M9NW olid state auto switches marked with are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL m Z (Example) M9NWZ Note 1) When using the 2-color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note 2) Through-hole mounting is not possible when using the auto switch at the square groove on the side. Note 3) When the product is ordered with auto switch, only MHZ2-1 is shipped with the auto switch mounting brackets. When the auto switch is used at the square groove on the side with MHZ2-1 to 2, mounting brackets (BMG2-) are required. Order them separately. Refer to page 83 for the auto switch mounting brackets. B 8 IC circuit Relay, PLC

47 Parallel tyle ir Gripper/Long troke Type eries MHZL2 pecifications ymbol Double acting: Internal grip Double acting: External grip ingle acting/ Normally closed: Internal grip ingle acting/ Normally open: External grip Refer to pages 8 to 8 for the specifications with auto switch. uto switch installation examples and mounting positions uto switch hysteresis uto switch mounting Protrusion of auto switch from edge of body Made to Order Individual pecifications (Refer to pages 7-1and 7-2 for details.) ymbol pecifications/description -X11 With dust cover Made to Order (Refer to pages 727 to 79 for details.) ymbol -X -X -X7 -X -X -X3 -X -X3 -X79 -X79 -X81 -X81B pecifications/description Heat resistance (1 C) Fluororubber seal Closing direction spring assist Opening direction spring assist Without magnet EPDM seal/fluorine grease xial ported type Fluorine grease Grease for food processing machines, Fluorine grease Grease for food processing machines nti-corrosive treatment of finger nti-corrosive treatment of finger and guide Operating pressure Option Fluid Double acting ingle Normally open acting MHZL2-1D MHZL2-1D MHZL2-2D MHZL2-2D MHZL2-1 MHZL2-1 MHZL2-2 MHZL2-2 MHZL2-1C MHZL2-1C MHZL2-2C MHZL2-2C External Internal 17 1 Body Option/End Boss Type Type of piping port ymbol MHZL2-1 M3 x. M3 x. MHZL2-1 MHZL2-2 M x.8 M x.8 ir ø1:.2 to.7 MPa ø1 to ø2:.1 to.7 MPa ø1:.3 to.7 MPa ø1 to ø2:.2 to.7 MPa 1 to C ±.1 mm c.p.m. Not required Double acting/ingle acting olid state auto switch (3-wire, 2-wire) Normally closed mbient and fluid temperature Repeatability Max. operating frequency Lubrication ction uto switch (Option) Note) Note) Refer to pages 87 to 8 for further information on auto switches. ction Double acting ingle acting Normally closed Normally open Bore size (mm) Gripping force Note 1) Gripping force per finger Effective value (N) Moisture Control Tube eries IDK MHZL2-2 Opening/ Closing stroke (Both sides) (mm) Note 1) Values based on pressure of. MPa, gripping point L = 2 mm, at center of stroke. Note 2) Values excluding weight of auto switch. Nil E W K M Piping port location Basic type ide ported xial ported xial ported xial ported With ø One-touch fitting for coaxial tubing With ø One-touch fitting M x Note 2) Weight (g) pplicable model Double acting ingle acting For detailed body option specifications, refer to option specifications on pages and 7. When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. imply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. For details, refer to eries IDK in the WEB catalog. 9

48 eries MHZL2 Construction: MHZL2-1 to 2 Double acting/with fingers open ingle acting/normally open!1 e!7 w!8!9!3 t r u!2 q o! i y ingle acting/normally closed!!!! Double acting/with fingers closed B Component Parts No Description Body Piston Replacement Parts eal kit Lever Guide Finger Roller stopper Lever shaft Cap Bumper Finger assembly Piston assembly End boss assembly Description Material luminum alloy ø1, ø1: ø2, ø2: luminum alloy luminum alloy Urethane rubber Component Parts No Lever assembly Finger option 1 = ide tapped, 2 = Through-hole, 3 = Flat type fingers End boss type W = One-touch-fitting for coaxial tubing, K = With One-touch fitting, M = With M port, E = ide ported The end boss assembly other than type E should be mounted on the special body. MHZL2- MHZL2-1 MHZL2-2 MHZL2-3 MHZL2-D MHZL2- MHZL2-C MHZL2-DW MHZL2-K MHZL2-M MHZL2-E Note Hard anodized ø2, ø2: Hard anodized Heat treated Heat treated Heat treated Nitriding Clear anodized MHZL2-1 MHZL1-P MHZL- MHZL--1 MHZL--2 MHZL--3 MHZL-13C MHZ-17 MHZ-18 MHZ-19 MHZ-11 MHZL-1 MHZL2-1 MHZL1-P MHZL- MHZL--1 MHZL--2 MHZL--3 MHZL-13C MHZ-17 MHZ-18 MHZ-19 MHZ-11 MHZL-1 Description Rubber magnet teel balls Needle roller Type C retaining ring Exhaust plug Exhaust filter pring Rod seal Piston seal Gasket MHZL2-2 MHZL2-P MHZL-22 MHZL-22-1 MHZL-22-2 MHZL-22-3 MHZL-23C MHZ-27 MHZ-28 MHZ-29 MHZ-21 MHZL-2 Material ynthetic rubber High carbon chrome bearing steel High carbon chrome bearing steel Carbon steel Brass Polyvinyl formal spring wire NBR NBR NBR MHZL2-2 MHZL2-P MHZL-22 MHZL-22-1 MHZL-22-2 MHZL-22-3 MHZL-13 MHZL-13 MHZL-23 MHZL-23 MHZL-23C MHZ-27 MHZ-28 MHZ-29 MHZ-21 MHZL-2 Main parts!7!8!9 rty!1 Mounting screw wo!!2 Main body of adaptor Mounting screw for adaptor eal kit Replacement part/grease pack part no.: GR--1 (1 g) e Note Phosphate coated Electroless nickel plated

49 Parallel tyle ir Gripper/Long troke Type eries MHZL2 Dimensions MHZL2-1 Double acting/ingle acting Basic type 29 (39) The values inside ( ) are dimensions for the single acting type x M3 x. thread depth.1 x M3 x. thread depth. Prepared hole dia. 2. through (Mounting hole) Note) +.2 ø2h9 ( ) depth 3.2± ø11h9 ( ) depth When open (7.8) 7 (7) 2 (3) 11 7.±.2 18 When closed Note) Through-hole mounting is not possible when using the auto switch. 1.±. 2 x M3 x. thread depth x M2. x. through (Thread for mounting attachment) M3 x. (Finger closing port). 3.7 M3 x. (Finger opening port) 21 (31) 8 uto witch Mounting Groove Dimensions.2 uto switch mounting groove Note) For single action, the port on one side is a breathing hole...2. Note) Through-hole mounting is not possible when using the auto switch at the square groove. 1

50 eries MHZL2 Dimensions MHZL2-1 Double acting/ingle acting Basic type 3 (1) The values inside ( ) are dimensions for the single acting type x M x.7 thread depth. +.2 ø3h9 ( ) depth 3.±.2.1 x M x.7 thread depth 8 Prepared hole dia. 3. through (Mounting hole) Note) +.3 ø17h9 ( ) depth ±.2 When open 2.9. When closed (7) 31 (3).2 (.2) Note) Through-hole mounting is not possible when using the auto switch at the square groove ±. 2 x M x.7 thread depth 8 M x.8 (Finger closing port) x M3 x. through (Thread for mounting attachment) M x.8 (Finger opening port) (3) 8 ø uto witch Mounting Groove Dimensions 8. uto switch mounting groove Note) For single action, the port on one side is a breathing hole uto switch mounting groove Note) Through-hole mounting is not possible when using the auto switch at the square groove. 2

51 Parallel tyle ir Gripper/Long troke Type eries MHZL2 MHZL2-2 Double acting/ingle acting Basic type 3 (9) The values inside ( ) are dimensions for the single acting type x M x.8 thread depth x M x.8 thread depth 1 Prepared hole dia..3 through (Mounting hole) Note) +.3 øh9 ( ) depth 7.±.2 2 x M x.8 thread depth 1 1.8± (2) 18 When open 3.3 When closed (9) 8 () Note) Through-hole mounting is not possible when using the auto switch at the square groove. 27.±. +.2 ø21h9 ( ) depth 3 x M x.7 through (Thread for mounting attachment) M x.8 (Finger closing port) 1 uto witch Mounting Groove Dimensions (3) 1 ø.2 9 M x.8 (Finger opening port) 9 uto switch mounting groove Note) For single action, the port on one side is a breathing hole uto switch mounting groove.2 Note) Through-hole mounting is not possible when using the auto switch at the square groove. 3

52 ø eries MHZL2 Dimensions MHZL2-2 Double acting/ingle acting Basic type 8 (8) The values inside ( ) are dimensions for the single acting type x M x 1 thread depth x M x 1 thread depth Prepared hole dia..1 through (Mounting hole) Note) +.3 øh9 ( ) depth 1±.2 2 x M x 1 thread depth 21.8± When open 1.3. When closed (7.9) 1 (11) () Note) Through-hole mounting is not possible when using the auto switch at the square groove ±. +.2 ø2h9 ( ) depth 3. x M x.8 through (Thread for mounting attachment) M x.8 (Finger closing port) 2 uto witch Mounting Groove Dimensions. M x.8 (Finger opening port) 33 (3) 1.2 uto switch mounting groove Note) 11. For single action, the port on one side is a breathing hole. 19 uto switch mounting groove Note) Through-hole mounting is not possible when using the auto switch at the square groove.

53 Long troke Type/eries MHZL2 Finger Option ide Tapped Mounting [1] x MM through (Thread for mounting attachment) Through-holes in Opening/ Closing Direction [2] C C B x øh through (Hole for mounting attachment) O B O MHZL2-11 MHZL2-11 MHZL2-21 MHZL Flat Type Fingers [3] B C 2 2. (mm) MM M2. x. M3 x. M x.7 M x.8 pecifications and dimensions other than the above are the same as the basic type. MHZL2- MHZL2- MHZL2-22 MHZL B (mm) H pecifications and dimensions other than the above are the same as the basic type. x MM thread depth L (Thread for mounting attachment) B B D G D K J J K F C W O (mm) B C D F G Open Closed MHZL MHZL MHZL MHZL pecifications and dimensions other than the above are the same as the basic type. J K 2H9 2.H9 3H9 H MM M2. x. M3 x. M x.7 M x.8 L 8 1 W Weight (g) Double acting ingle acting B

54 pplicable Long troke Type/eries MHZL2 Body Option: End Boss Type ymbol E W K M Piping port location ide ported xial ported Type of piping port pplicable model MHZL2-1 MHZL2-1 MHZL2-2 MHZL2-2 ingle acting Double acting Normally open Normally closed M3 x. M x.8 With ø One-touch fitting for coaxial tubing With ø One-touch fitting M x.8 ide Ported [E] End boss assembly uto switch mounting groove ( locations) (Except ø1) MHZL2-1E 1 B 7 D1 f8.1.3 D2 11 E1 2.8 (mm) E2 2.8 ød2 MHZL2-1E MHZL2-2E f8 2f ød1.2 MHZL2-2E 2 1 2f Other dimensions and specifications correspond to the standard type. 9.2 B E1 (Double acting) E2 (ingle acting) uto switch mounting groove Refer to the dimension table. (Both sides) When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. xial Ported (with One-touch fitting for coaxial tubing) [W] Plug pplicable coaxial tubing End boss assembly G ød2 ød1 uto switch mounting groove ( locations) (Except ø1) H (mm) MHZL2-1DW 1 B 7 D1.1 f8.3 D2 11 E1 2.8 MHZL2-1DW f MHZL2-2DW f MHZL2-2DW f Other dimensions and specifications correspond to the standard type. Max. pplicable Coaxial Tubing Type W F B uto switch H F G H E1 TWB-2 mounting groove pecifications ø (Both sides) Outside diameter Max. operating pressure mm. MPa ø1 ø Reference symbol Min. bending radius 1 mm ø Operating temperature 2 to C Material Nylon Refer to the dimension table. When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. (External passage) (Internal passage) Changing from Coaxial to ingle Tubing Changing to single tubing is possible by using a branch Y or branch tee fitting. In this case particularly, single tube fittings and tubing for ø3.2 will be necessary. Branch tee, Different diameter tee, Branch Y, Male run tee Please contact MC for the coaxial fittings and tubing. Coaxial tubing Coaxial tubing Branch tee : KWT-23 Coaxial tubing ingle tubing Branch Y : KWU-23 ingle tubing Coaxial tubing ingle tubing ingle tubing ingle tubing ø3.2 Marking Finger opening side Marking Finger closing side

55 Parallel tyle ir Gripper/Long troke Type eries MHZL2 xial Ported (with One-touch fitting) [K] Plug E2 uto switch mounting groove ( locations) (Except ø1) pplicable tubing End boss assembly G Note 1) H F Note 2) ød2 B ød1 Max. H uto switch mounting groove (Both sides) Refer to the dimension table. When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. Note 1) Normally open type plug position. Note 2) Normally closed type plug position. The plug is mounted on only one side for the single acting type. MHZL2-1 C K 1 B 7 D1.1 f8.3 D2 11 MHZL2-1 C K f8.3 1 MHZL2-2 C K f MHZL2-2 C K f8.3 2 Other dimensions and specifications correspond to the standard type. pplicable Tubing Description/ pecifications Outside diameter (mm) Max. operating pressure (MPa) Min. bending radius (mm) Operating temperature ( C) Material Type K ø1 ø1 ø2 ø2 F G H (mm) E Nylon oft nylon Polyurethane Polyurethane tubing tubing tubing coil tubing T2 T2 TU2 TCU2B to Nylon.8 2 to Nylon. 1 2 to Polyurethane Refer to Best Pneumatics No. regarding One-touch fittings and tubing.. 2 to Polyurethane xial Ported (with M port) [M] Plug E2 End boss assembly G Note 1) F Note 2) ød2 B M x.8 Piping port ød1 uto switch mounting groove ( locations) (Except ø1) H uto switch mounting groove (Both sides) Refer to the dimension table. When auto switches are used at the square groove on the side, side mounting with through-holes is not possible. Note 1) Normally open type plug position. Note 2) Normally closed type plug position. The plug is mounted on only one side for the single acting type. MHZL2-1 CM 1 B 7 D1.1 f8.3 D2 11 MHZL2-1 CM f8.3 1 MHZL2-2 CM f MHZL2-2 CM f8.3 2 Other dimensions and specifications correspond to the standard type. Type M ø1 ø1 ø2 ø2 F G H (mm) E Weight (g) End boss type (ymbol) E Double acting ingle acting W K M MHZL MHZL MHZL MHZL

56 eries MHZL2 Made to Order Individual pecifications Please contact MC for detailed dimensions, specifications and lead times. 1 ymbol With dust cover (For MHZL1, 1, 2) -X11 Long stroke type (size 1, 1, 2) with dust cover MHZL 2 1 D M9BW X11 Number of fingers 2 2 fingers Nil F Bore size 1 1 mm 1 1 mm 2 2 mm D Nil ction Double acting Dust cover type Chloroprene rubber (CR) Fluororubber (FKM) ilicone rubber (i) uto switch Without auto switch (Built-in magnet) * vailable only for D-M9l. ymbol With dust cover Nil: Chloroprene rubber (CR) pecial specifications Dust cover type F: Fluororubber (FKM) : ilicone rubber (i) Nil Basic type v v v Heat resistance v v B Number of auto switches Nil 2 pcs. 1 pc. n n pc. Fluororubber seal v * When using the heat resistance or fluororubber seal types, refer to Precautions shown below. pecifications Basic type Heat resistance Fluororubber seal mbient and fluid temperature 1 to C 1 to 1 C 1 to C pecifications other than the above ame as the standard type ction Bore size (mm) Gripping force Note 1) Opening/ Gripping force per finger Effective value (N) External Internal Closing stroke (Both sides) (mm) Note 2) Weight (g) MHZL2-1D-X Double MHZL2-1D-X11 acting MHZL2-2D-X Note 1) Values based on pressure of. MPa, gripping point L = 2 mm, at center of stroke. Note 2) Values excluding weight of auto switch. Precautions For heat resistance Warning Be aware that smoking cigarettes after your hands have come into contact with the grease used for this air gripper can create a gas that is hazardous to humans. Caution Note 1) Magnet is built-in, but when using an auto switch, the acceptable temperature range becomes 1 to C. Note 2) For the dust cover option part number, only fluororubber (F) or silicone rubber () can be selected. Note 3) For lubrication, specialized grease GR-F is recommended. For fluororubber seal Caution Note 1) Consult with MC, since the type of chemical and the operating temperature may not allow the use of this product. Note 2) ince the standard-type magnet is built-in, consult with MC for the product s adaptability to the operating environment. Note 3) The dust cover material is also fluororubber. Thus, enter (F) for the fluororubber dust cover in the part number. 7-1

57 Made to Order Individual pecifications eries MHZL2 Dimensions MHZL2-1D-X11 Basic type/double acting M3 x. M3 x. 2 1.±. Width across flats.9 8. (23.) x M3 x. thread depth ccessory: Extension fitting assembly (2 pcs.) When using the perpendicular type (D-M9V) switch, use an extention fitting since the switch interferes with the One-touch fitting..1 x M3 x. thread depth. Prepared hole dia. 2. through (Mounting hole) +.2 ø2h9 ( ) depth 3.2±.2 (2.2) When open When closed x M2. x. through (ttachment mounting thread) O 8 21 * The dimensions of the heat resistance or fluororubber seal types are the same as those shown above M3 x. (Finger closing port) 11 M3 x. (Finger opening port) 7.± x M3 x. thread depth ø11h9 ( ) depth 1. uto witch Mounting Groove Dimensions uto switch mounting groove (Both sides) ø MHZ MHF MHL MHR MHK MH MHC MHT -Z MHY MHW -X MRHQ M D- 7-2 B

58 eries MHZL2 Dimensions MHZL2-1D-X11 Basic type/double acting 3 (3) 1 23.±. 2 x M x.7 thread depth. () When open When closed 1.9. x M3 x. through (ttachment mounting thread) 1 x M x.7 thread depth 8 Prepared hole dia. 3. through (Mounting hole) M x.8 (Finger closing port) M x.8 (Finger opening port) ø3h9 ( ) depth 3 11± ± ø17h9 ( ) depth 2 2 x M x.7 thread depth uto witch Mounting Groove Dimensions uto switch mounting groove (Both sides) O ø * The dimensions of the heat resistance or fluororubber seal types are the same as those shown above. 7-3

59 Made to Order Individual pecifications eries MHZL2 Dimensions MHZL2-2D-X11 Basic type/double acting 9 (37) ±. 2 x M x.8 thread depth 8 () When open When closed 1.3. x M x.7 through (ttachment mounting thread) * The dimensions of the heat resistance or fluororubber seal types are the same as those shown above. x M x.8 thread depth 1 Prepared hole dia..3 through (Mounting hole) 7 2 O M x.8 (Finger closing port) M x.8 (Finger opening port) 1 øh9 ( ) depth 1.8± ± ø21h9 ( ) depth 3 2 x M x.8 thread depth 1 uto witch Mounting Groove Dimensions uto switch mounting groove (Both sides) 1 ø MHZ MHF MHL MHR MHK MH MHC MHT -Z MHY MHW -X MRHQ M D- 7-

60 Parallel tyle ir Gripper with Dust Cover eries MHZJ2 ø, ø1, ø1, ø2, ø2, ø32, ø How to Order Number of fingers 2 2 fingers Nil: Basic type Bore size mm 1 1 mm 1 1 mm 2 2 mm 2 2 mm ø32, ø: Made to Order (For details, refer to page 79-1.) Port E: End boss type ide ported (Double acting /ingle acting) MHZJ2 D C 1 D ction Double acting ingle acting (Normally open) ingle acting (Normally closed) Body option ø is only applicable with basic type. Port W: End boss type xial ported with ø One-touch fitting for coxial tubing (Double acting) Port M9BW Made to Order Refer to page 9 for details. Number of auto switches Nil 2 pcs. 1 pc. n n pc. uto switch Nil Without auto switch (Built-in magnet) For the applicable auto switch model, refer to the table below. Dust cover type Nil Chloroprene rubber (CR) F Fluororubber (FKM) ilicone rubber (i) K: End boss type xial ported with ø One-touch fitting for coaxial tubing (ingle acting) Port M: End boss type xial ported with M port (ingle acting) Port B pplicable uto witches/refer to pages 87 to 8 for further information on the auto switch. Type olid state auto switch pecial function Diagnosis (2-color indicator) Water resistant (2-color indicator) Electrical entry Indicator light Wiring (Output) 3-wire (NPN) 3-wire (PNP) Load voltage DC V, V 2-wire V Grommet Yes 2 V 3-wire (NPN) V, V 3-wire (PNP) 2-wire V 3-wire (NPN) V, V 3-wire (PNP) 2-wire V C uto switch model Electrical entry direction Perpendicular M9NV F8N M9PV F8P M9BV F8B M9NWV M9PWV M9BWV M9NV M9PV M9BV In-line M9N M9P M9B M9NW M9PW M9BW M9N M9P M9B Lead wire length (m). (Nil) 1 (M) 3 (L) (Z) pplicable model ø ø1 ø1 ø2 ø2 Pre-wired connector pplicable load IC circuit IC circuit Water resistant type auto switches can be mounted on the above models, but in such case MC cannot guarantee water resistance. Lead wire length symbols:. m Nil (Example) M9NW olid state auto switches marked with are produced upon receipt of order. 1 m M (Example) M9NWM 3 m L (Example) M9NWL m Z (Example) M9NWZ Note 1) When using the 2-color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note 2) When using a D-F8 switch on sizes ø, mount it at a distance of 1 mm or more from magnetic substances such as iron, etc. 8 IC circuit Relay, PLC

61 Parallel tyle ir Gripper with Dust Cover eries MHZJ2 ymbol Double acting: Internal grip Double acting: External grip pecifications Fluid Double acting Operating pressure ingle Normally open acting Normally closed mbient and fluid temperature Repeatability Max. operating frequency Lubrication ction uto switch (option) Note) ir ø:.1 to.7 MPa ø1:.2 to.7 MPa ø1 to ø2:.1 to.7 MPa ø:.3 to.7 MPa ø1:.3 to.7 MPa ø1 to ø2:.2 to.7 MPa 1 to C ±.1 mm 18 c.p.m. Not required Double acting, ingle acting olid state auto switch (3-wire, 2-wire) Note) Refer to pages 87 to 8 for further information on auto switches. ingle acting/ Normally closed: Internal grip Made to Order Individual pecifications (Refer to pages 7-1 and 7-2 for details.) ymbol pecifications/description -X1 With dust cover (ø32, ø) Made to Order (Refer to pages 727 to 79 for details.) ymbol pecifications/description -X Heat resistance (1 C) -X Fluororubber seal -X7 Closing direction spring assist -X Opening direction spring assist -X Without magnet -X3 EPDM seal/fluorine grease -X xial ported type -X3 Fluorine grease -X Finger: ide tapped mounting -X Finger: Through-hole mounting -X77 Dust cover adhesion -X77B Dust cover adhesion (Finger part only) -X78 Dust cover caulking -X78B Dust cover caulking (Finger part only) -X79 Grease for food processing machines, Fluorine grease -X79 Grease for food processing machines -X81 nti-corrosive treatment of finger Moisture Control Tube eries IDK ingle acting/ Normally open: External grip When operating an actuator with a small diameter and a short stroke at a high frequency, the dew condensation (water droplet) may occur inside the piping depending on the conditions. imply connecting the moisture control tube to the actuator will prevent dew condensation from occurring. For details, refer to eries IDK in the WEB catalog. ction Double acting ingle acting Normally closed Normally open Option MHZJ2- D MHZJ2-1D MHZJ2-1D MHZJ2-2D MHZJ2-2D MHZJ2- MHZJ2-1 MHZJ2-1 MHZJ2-2 MHZJ2-2 MHZJ2- C MHZJ2-1C MHZJ2-1C MHZJ2-2C MHZJ2-2C Bore size (mm) Gripping force External Note 1) Gripping force per finger Effective value (N) Internal Body Option/End Boss Type Piping port Type of piping port ymbol location MHZJ2-1 MHZJ2-1 MHZJ2-2 M3 x. M x.8 M3 x. M x MHZJ2-2 Opening/ Closing stroke (Both sides) (mm) Note 1) Values based on pressure of. MPa, gripping point L = 2 mm, at center of stroke. Note 2) Values excluding weight of auto switch. Nil E W K M Basic type ide ported xial ported xial ported xial ported With ø One-touch fitting for coaxial tubing With ø One-touch fitting M x.8 For detailed body option specifications, refer to option specifications on pages 78 and 79. Refer to pages 8 to 8 for the specifications with auto switch. uto switch installation examples and mounting positions uto switch hysteresis uto switch mounting Protrusion of auto switch from edge of body Note 2) Weight (g) pplicable model Double acting ingle acting 9 B

Parallel Style Air Gripper

Parallel Style Air Gripper Parallel tyle Air Gripper eries MHZ MHZ MH -X D- Courtesy of teven Engineering, Inc.-3 Ryan Way, outh an Francisco, CA 98-37-Main Office: () 88-9-Outside Local Area: (8) 8-9-www.stevenengineering.com 373

More information

Parallel Type Air Gripper

Parallel Type Air Gripper Parallel Type Air Gripper MHZ eries ø, ø1, ø1, ø2, ø2, ø32, ø MHZ MHF MHL MHR MHK MH MHC MHT MHY MHW -X MRHQ MA D- 381 Integral linear guide used for high rigidity Repeatability: ±.1 mm Low profile Martensitic

More information

Series MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger)

Series MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger) Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials tandard: Carbon steel Optional:

More information

How to Order M9BW. Action. Double acting Single acting. Load voltage Electrical entry direction M9NWV M9NW 12 V 5 V, M9BWV M9BW 12 V 12 V

How to Order M9BW. Action. Double acting Single acting. Load voltage Electrical entry direction M9NWV M9NW 12 V 5 V, M9BWV M9BW 12 V 12 V Angular Type Air Gripper/Standard Type 2 Series ø, ø1, ø20, ø25 How to Order Angular type air gripper 2 20 Bore size mm 1 1 mm 20 20 mm 25 25 mm D S Action D Double acting Single acting M9BW Made to Order

More information

Rotary Actuated Air Gripper

Rotary Actuated Air Gripper Rotary ctuated ir Gripper MHR, MDHR/MHR3, MDHR3 -finger type: Size, 15,, 3/ 3-finger type: Size, 15 High Precision - Repeatability ±.1 mm Parallel opening and closing mechanism utilizing a cross roller

More information

Angular Style Air Gripper

Angular Style Air Gripper Angular Style Air Gripper Series /A/M 15 Angular style air gripper Series /A/M - Auto switch is attachable. 8 mm x 0 mm x mm g Body option (Only for A-) Side piping Port Port A- Short body. 1 mm x 0 mm

More information

Low Profile Air Gripper

Low Profile Air Gripper Low Profile Air Gripper Series MHF2 MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW -X Low profile air gripper with space-saving design MRHQ MA D- Courtesy of Steven ngineering, Inc.-2 Ryan Way, South San Francisco,

More information

Low Profile Air Gripper

Low Profile Air Gripper Low Profile Air Gripper MHF2 Series ø8, ø, ø, ø RoHS Low profile air gripper with space-saving design MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 465 Low Profile Air Gripper MHF2 Series Height

More information

180 Angular Style Air Gripper

180 Angular Style Air Gripper 8 Angular Style Air Gripper Series 2/2 Cam Style / Rack & Pinion Style 99 8 Angular Style Air Gripper Cam Style Rack & Pinion Style Series 2/2 Series 2/Cam Style Light and compact size in small bore sizes

More information

Parallel Style Air Gripper: Wide Type

Parallel Style Air Gripper: Wide Type Parallel Style Air Gripper: Wide Type Series MHL Built-in dust-protection mechanism A scraper with a dust lip is adopted for all rod rotating parts. A large amount of gripping force is provided through

More information

Specifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper

Specifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper Angular Style Air Gripper Standard Type Series MHC2 Size: 10, 16, 20, 25 A large amount of gripping force is provided through the use of a double piston mechanism, while maintaining a compact design. Built-in

More information

Parallel Style Air Gripper

Parallel Style Air Gripper INFRMATIN Parallel tyle Air Gripper With Dust Cover Model variations with excellent dust proof and drip proof dust cover are expanded. MHZL2 Long stroke type MHZL2 series ø1, ø16 and ø2 with dust cover

More information

Series MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port

Series MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port Parallel Type ir Gripper How to Order 1 1 2 Bore size mm 1mm 1mm 2mm mm MHZJ2 1 D F9PV Number of fingers 2 2 fingers D S C ction Double acting Single acting (normally open) Single acting (normally closed)

More information

MHR3/MDHR3 Series. Rotary Actuated Air Gripper/3-Finger Type. Size: 10, 15 MDHR 3 10 R M9N S. How to Order. Without auto switch

MHR3/MDHR3 Series. Rotary Actuated Air Gripper/3-Finger Type. Size: 10, 15 MDHR 3 10 R M9N S. How to Order. Without auto switch Rotary ctuated ir Gripper/3-Finger Type MHR3/MDHR3 Series Size:, 1 How to Order Without auto switch MHR 3 R Connecting port R ody side R: ody side Port With auto switch (uilt-in magnet) MDHR 3 R M9N S

More information

180 Angular Style Air Gripper

180 Angular Style Air Gripper 18 Angular tyle Air Gripper eries 2/2 Cam tyle / Rack & Pinion tyle -X D- Courtesy of teven Engineering, Inc.-2 Ryan Way, outh an Francisco, CA 98-67-Main ffice: (6) 88-92-utside Local Area: (8) 28-92-www.stevenengineering.com

More information

How to Order. Lead wire length Nil L Z M9N L. Type of auto switch for detecting rotation. Nil Without auto switch. Applicable Auto Switch

How to Order. Lead wire length Nil L Z M9N L. Type of auto switch for detecting rotation. Nil Without auto switch. Applicable Auto Switch Indicator light Indicator light Rotary Gripper Series MRHQ Size:, 1,, 25 How to Order Lead wire length Nil L Z.5 m 3 m 5 m MRH Q D 9 S M9NV L M9N L Q Rotary gripper Gripper Parallel type: 2 fingers D S

More information

Parallel Type Air Gripper. Series MHZ. ø6, ø10, ø16, ø20, ø25, ø32, ø40 MHZ MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ.

Parallel Type Air Gripper. Series MHZ. ø6, ø10, ø16, ø20, ø25, ø32, ø40 MHZ MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ. Parallel Type Air Gripper Series ø, ø1, ø1, ø, ø, ø3, ø MHQ MHL MHR MHK MHS Series upgraded with the addition of new models and expanded size variations Long stroke/l and compact series/a- introduced ø,

More information

Low Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77

Low Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Height is approximately / the size of an equivalent Series MHZ2. MHZ2-D 42 Bore

More information

Series MHY2/MHW Angular Gripper. Series MHY/Cam Style. Light and compact size in small bore sizes. Auto switch mounting at 4 locations

Series MHY2/MHW Angular Gripper. Series MHY/Cam Style. Light and compact size in small bore sizes. Auto switch mounting at 4 locations 18 Angular Gripper Cam tyle Rack & Pinion tyle eries /MHW2 eries MHY/Cam tyle Light and compact size in small bore sizes Model Bore size mm Effective holding moment Nm verall length Lmm L Weight g -1D

More information

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Compact Slide. Series MXH ø6, ø10, ø16, ø20 Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations

More information

Wedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel

Wedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon

More information

Air Gripper (2 Finger) (3 Finger)

Air Gripper (2 Finger) (3 Finger) Rotary Actuated Air Gripper ( Finger) (3 Finger) MHR/MDHR, MHR3/MDHR3 High Precision - Repeatability ±0.01mm Parallel opening and closing mechanism utilizing a cross roller guide produces smooth operation

More information

SeriesMHZL2 How to Order

SeriesMHZL2 How to Order Parallel Type ir Gripper Long Stroke SeriesMHZL2 How to Order 1 2 2 ore size Number of fingers 2 2 fingers 1mm mm 2mm 2mm MHZL2 D S C ction Double acting Single acting (normally open) Single acting (normally

More information

New cylinder body allows small auto switches to be mounted on 4 surfaces.

New cylinder body allows small auto switches to be mounted on 4 surfaces. Toggle Type Air Gripper ø32, ø4, ø5, ø63 New cylinder body allows small auto switches to be mounted on 4 surfaces. RoH Auto switch mounting rail removed. A round slot for mounting small auto switches is

More information

Series MHZ2/MHZJ2. Parallel Type Air Gripper. Series MHZJ2 with dust cover introduced! New finger options added to Series MHZ2 standard type.

Series MHZ2/MHZJ2. Parallel Type Air Gripper. Series MHZJ2 with dust cover introduced! New finger options added to Series MHZ2 standard type. CAT.E273- B Parallel Type Air Gripper Standard Type With Dust Cover Series MHZ2/MHZJ2 Series MHZJ2 with dust cover introduced! New finger options added to Series MHZ2 standard type. Integrated linear guide

More information

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8 Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole

More information

Parallel Type Air Gripper/2 Finger, 3 Finger, 4 Finger

Parallel Type Air Gripper/2 Finger, 3 Finger, 4 Finger Parallel Type Air Gripper/ inger, inger, inger MHS Series ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- ightweight, compact design with reduced height High repeatability:

More information

Toggle Type Air Gripper

Toggle Type Air Gripper ø2, ø40, ø50, ø6 Ideal for gripping heavy workpiece Toggle mechanism is adopted. Holds workpiece even when pressure drops. The toggle mechanism that activates when the finger closes realizes strong and

More information

Mini Free Mount Cylinder

Mini Free Mount Cylinder Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

More information

Wide Type Parallel Style Air Gripper

Wide Type Parallel Style Air Gripper Wide Type Parallel Style ir Gripper ø, ø6, ø2, ø25 Weight Max. % reduction 585 g 525 g ø6, Opening/Closing stroke: 3 mm RoHS Weight reduced by the change of the body shape and internal construction M Dust

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g. Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable

More information

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

More information

22mm Space required between the bottom of the cylinder body and your equipment is reduced.

22mm Space required between the bottom of the cylinder body and your equipment is reduced. Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner

More information

Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece

Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece ir Slide Table Series RoHS Height: mm/width: mm/length: mm () Traveling parallelism: 0.00 mm Note 1) Front mounting accuracy: 0.01 mm Note ) Top mounting accuracy: 0.0 mm Integrated front mounting part

More information

Guide Table. MGF Series

Guide Table. MGF Series Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Guide Table. ø40, ø63, ø100

Guide Table. ø40, ø63, ø100 Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Air Slide Table. Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece

Air Slide Table. Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece ir Slide Table Series Height: mm/width: mm/length: mm () Front mounting accuracy: 0.01 mm Top mounting accuracy: 0.0 mm Traveling parallelism: 0.00 mm Note 1) Note ) Integrated front mounting part and

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder / Series ø,,,,, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions for ball

More information

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43 CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø2, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Series standard type and series high precision ball bushing bearing type (except with end lock) products have been remodeled for a lightweight

More information

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover

More information

Compact Guide Cylinder Series MGP

Compact Guide Cylinder Series MGP Compact Guide Cylinder Series MGP ø2, ø, ø, ø, ø, ø, ø, ø,, ø0 MGJ MGP MGQ MGG MGC MGF MGZ MGT Series Variations Series Bearing type Cushion 2 0 Page Standard type MGP With air cushion MGP With end lock

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder.

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder. Compact Guide Cylinder Series ø2,,, ø2,,, ø, ø63,, ø0 Up to Weight reduced by up to 24% with a shorter guide rod and thinner plate 24% Weight reduced! 3 types of bearing can be selected. Slide bearing

More information

Guide Table. Series MGF

Guide Table. Series MGF Guide Table Series MGF ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder J/ Series ø, ø, ø, ø, ø, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions

More information

Parallel Style Air Gripper Standard Type. How to Order. Nil: Basic type. Action Double acting. 1: Side tapped mounting. Action Double acting

Parallel Style Air Gripper Standard Type. How to Order. Nil: Basic type. Action Double acting. 1: Side tapped mounting. Action Double acting Parallel Style Air Gripper Standard Type Series -MHZ2 ø10, ø, ø20, ø25, ø32, ø40 ø to ø25 MHZ2 Finger position/option Standard (MHQG2 compatible type) Nil: Basic type Narrow type (MHQ2 compatible type)

More information

Mini Rotary Actuator/Rack & Pinion Style

Mini Rotary Actuator/Rack & Pinion Style Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5

More information

Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines.

Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. AHC System Series MA Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different

More information

Air Slide Table. Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece

Air Slide Table. Traveling parallelism: mm. Mounting from the through-holes on the top. Tapped for mounting a work piece ir Slide Table Series Height: mm/width: mm/length: mm () Front mounting accuracy: 0.01 mm Top mounting accuracy: 0.0 mm Traveling parallelism: 0.00 mm Note 1) Note ) Integrated front mounting part and

More information

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added. ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side

More information

Free Mount Cylinder for Vacuum

Free Mount Cylinder for Vacuum Free Mount Cylinder for Vacuum Series A free mount cylinder with a vacuum passage in the rod to meet the requirements for Air cylinder + Vacuum pad. A vacuum passage has been provided in the rod of the

More information

Features. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature

Features. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature series PRE GRIPPER (2-inger) Order example HD 2R MODE TUE I.D. 8 12 16 2 PIPING TYPE lank: xial piping R: Side piping eatures ow profile design saves space and reduces bending moments, improved accuracy

More information

Compact Cylinder/Plate type

Compact Cylinder/Plate type Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series

More information

Mini Rotary Actuator/Rack & Pinion Style

Mini Rotary Actuator/Rack & Pinion Style Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5 43(54)

More information

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

Heavy Duty Stopper Cylinder

Heavy Duty Stopper Cylinder Heavy Duty Stopper Cylinder Series ø, ø32 To stop pallets gently Stopper cylinder with built-in shock absorber Amount of energy absorption can be adjusted to suit the load. Stops the workpiece gently with

More information

Dual Rod Cylinder: Double Rod Type. How to Order. Load voltage Auto switch model Perpendicular In-line 3-wire (NPN equivalent) Y7NWV Y7NW 5 V, 12 V

Dual Rod Cylinder: Double Rod Type. How to Order. Load voltage Auto switch model Perpendicular In-line 3-wire (NPN equivalent) Y7NWV Y7NW 5 V, 12 V Dual Rod Cylinder: Double Rod Type eries CXW ø, ø, ø, ø, ø2, ø32 CX W L How to Order 0 Y7W M L Double rod type earing type lide bearing all bushing bearing ore size/troke ore size,,,,,,,,,,,,,,, 2, 32,

More information

Mechanically Jointed Rodless Cylinders

Mechanically Jointed Rodless Cylinders Mechanically Jointed Rodless Cylinders MY Series Basic short type (Rubber bumper) MY Series Bore sizes ø, ø, ø0 added MYB MY Basic standard type (ir cushion) MYB MYB Series MYM MYC MY MY T Bore sizes ø,

More information

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state

More information

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32 Slide Unit CX/M/L Series Slide Bearing/CX:ø0, ø, ø5 M:ø0, ø, ø0, ø5, ø3 Ball Bushing Bearing/L:ø0, ø, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy

More information

Series MXH/ ø6, ø10, ø16, ø20

Series MXH/ ø6, ø10, ø16, ø20 Compact Slide Series / ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. CL MLG CNA CNG MNB CNS CLS CB CV/MVG

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle

More information

Parallel Style Air Gripper/2 Finger, 3 Finger, 4 Finger

Parallel Style Air Gripper/2 Finger, 3 Finger, 4 Finger arallel Style Air Gripper/ inger, inger, inger Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- ightweight, compact design with reduced height High repeatability:

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder eries ø, ø, ø Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. eries Variations tandard

More information

Compact Guide Cylinder with Lock

Compact Guide Cylinder with Lock Compact Guide Cylinder with Lock Series,,,, ø,,, ø0 CLG CL CN2 MLC Drop prevention when the pressure of air source is decreased or the residual pressure is released. Drop prevention for press fitting jig

More information

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one

More information

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional

More information

Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return

Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E -UK Dual-Rod Cylinder Series CXS New: CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ Dual-Rod Cylinder with guide functio for pick-and-place applications Series CXS! Twice the

More information

Free Mount Cylinder. Series CU. A space saving air cylinder with multiple surfaces for mounting. The series consist of an array of cylinders.

Free Mount Cylinder. Series CU. A space saving air cylinder with multiple surfaces for mounting. The series consist of an array of cylinders. Mounting Axial mounting (Body tapped) Free Mount Cylinder eries CU Double Acting ingle Rod/Double Rod ingle Acting pring Return/Extend, Non-rotating Rod ø, ø, ø1, ø, ø, ø A space saving air cylinder with

More information

Rotary Table/Vane Style

Rotary Table/Vane Style Rotary Table/Vane Style Series Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less X Series B Series A 147 Rotary Table Values inside ( ) are for Series

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E -UK Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating

More information

Compact Hydraulic Cylinder

Compact Hydraulic Cylinder ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch

More information

Rotary Actuator/Vane Type

Rotary Actuator/Vane Type Rotary Actuator/Vane Type CRB2 Series : 1, 15, 2, 3, 4 Standard Type Free Mount Type Many combinations available! Standard type/crb2 Series Piping ports are located on the flat surface. Fittings can be

More information

Rotary Actuator. New RoHS. New. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB 2. Standard type/series CRB2

Rotary Actuator. New RoHS. New. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB 2. Standard type/series CRB2 Rotary Actuator Vane Type 1, 15, 2, 3, 4 Standard Type Free Mount Type Many combinations available! Standard type/series Piping ports are located on the flat surface. Fittings can be secured firmly, piping

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series CQS ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility

More information

Rotary Table/Vane Style

Rotary Table/Vane Style Rotary Table/Vane Style Series MSU Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less CRB2 CRBU2 CRB1 MSU CRJ CRQ2 MSQ MSZ CRQ2X MSQX MRQ Series MSUB

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle

More information

10, 15, 20, 30, 40 MSQX

10, 15, 20, 30, 40 MSQX Possible to transfer a workpiece at low-speed. Rotation time adjustment range: 1 to 5 ( s/90 ) Lowspeed Standard Low-Speed Rotary ctuator / Series :,,,, :,,, Model,,,,,,,,,,,,,, Rotation time adjustment

More information

CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.

CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1. eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-

More information

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm) Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder

More information

CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating

More information

Low Profile Slide Table Series MXF ø8, ø12, ø16, ø20

Low Profile Slide Table Series MXF ø8, ø12, ø16, ø20 Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with

More information

Rotary Clamp Cylinder

Rotary Clamp Cylinder Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable

More information

Series MXS ø6, ø8, ø12, ø16, ø20, ø25

Series MXS ø6, ø8, ø12, ø16, ø20, ø25 ork table and air cylinder are integrated compactly. ir slide table is ideal for precise assembly. CL Repeatability of work mounting lush mountable auto switches n installed auto switch in the housing

More information

Air Slide Table/Long Stroke Type

Air Slide Table/Long Stroke Type ir Slide Table/ong Stroke Type Series ø6, ø8, ø1 RoHS MX long stroke type of series air slide table with integrated liner guide. D- -X Use of linear guide provides rigid, The slide table comes with a built-in

More information

CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting

CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return

More information

49.5 mm Overall. 30 mm MXZ ø20. Compact. Compact Cylinder with Linear Guide. MXZ Series CAT.ES20-236A. ø12, ø16, ø20, ø25. MXZ ø20, 10 mm stroke.

49.5 mm Overall. 30 mm MXZ ø20. Compact. Compact Cylinder with Linear Guide. MXZ Series CAT.ES20-236A. ø12, ø16, ø20, ø25. MXZ ø20, 10 mm stroke. Compact Cylinder with Linear Guide ø12, ø16, ø20, ø25 RoHS Compact 49.5 mm Overall length MXZ ø20, 10 mm stroke 30 mm MXZ ø20 Width Design and assembly time is reduced due to integration of a linear guide

More information

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod. eries /, 12,,,,,,, 3,, eries Variations eries eries Action Built-in magnet With air cushion tandard variations Built-in One-touch fitting With auto switch With strong scraper Page CX ouble acting -- CY

More information

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod. eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-

More information

3-Position Rotary Table

3-Position Rotary Table -osition Rotary Table Series CR1 Stop position adjustment range From center: Rotation range: 0 to 9 The desired position is adjustable to between 0 and 9 from the centered position to both the right and

More information

Rotary Clamp Cylinder

Rotary Clamp Cylinder Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable

More information

How to Order. Standard stroke (mm) ø10 15, 30, 45, 60

How to Order. Standard stroke (mm) ø10 15, 30, 45, 60 ingle Acting, ingle Rod, pring Return/Extend eries K ø, ø pring extend pring return B L D Without auto switch With auto switch mm mm Basic Axial foot Rod side flange Double clevis K L CDJ2K L How to Order

More information