Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page.

Size: px
Start display at page:

Download "Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page."

Transcription

1 ir Cylinder: With End ock Series C ø, ø, ø, ø, ø Without auto switch With auto switch F G C D T With auto switch Mounting style asic style xial foot style Rod side flange style Head side flange style Single clevis style Double clevis style Center trunnion style C CD ore size mm mm mm mm mm Cylinders with uilt-in Magnets Tube material il luminum tube F Steel tube Types with auto switch are not available. If built-in magnet type is ordered without auto switch, leave the field for the auto switch type blank. (Example) CD--H How to Order Port thread type il Rc T PT TF G Cylinder stroke For more information, please refer to the next page. Cylinder suffix il Without rod boot Rod boot J ylon tarpaulin K Heat resistant tarpaulin Cushion il With cushion on both sides Without cushion When more than one symbol is to be specified, indicate them in alphabetical order. pplicable uto Switch/Refer to page 6--1 for further information on auto switches. Type Reed switch Solid state switch Special function Electrical entry Diagnostic indication (-color indication) Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Magnetic field resistant (-color indication) Indicator light Yes Yes Wiring (Output) -wire (P equiv.) -wire -wire (P) -wire (PP) -wire -wire (P) -wire (PP) -wire 4-wire (P) -wire 4 V DC oad voltage V V, V V V, V 1 H 1 H YW umber of auto switches il S n pcs. 1 pc. n pcs. uto switch il Without auto switch Select an applicable auto switch part number from the table below. Z/Z/Y/Y6/Y are not mounted and are supplied loose. (Only the switch mounting brackets for these models are mounted.) Manual release type ock position H R W on-lock type ock type Head side end lock Rod side end lock Double end lock ead wire length symbols:. m il (Example) 4 Solid state switches marked with are produced upon receipt of m (Example) 4 order. m Z (Example) 4Z In addition to the models in the above table, there are some other auto switches that are applicable. For more information, refer to page 6--. C V V 4 V V, V 4 V V, V V, V V uto switch model ead wire length (m) Tie-rod mount Z6 Z 4 W Y YP J1 Y YW YPW YW Y FF PDW. (il) () (Z) Pre-wire connector pplicable load IC circuit IC circuit IC circuit Relay, PC IC circuit Relay, PC CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6--41

2 Series C Maintains the cylinder s original position even if the air supply is interrupted. When air is discharged at the stroke end position, the lock engages to maintain the rod in that position. Same dimensions as those of the standard cylinder (Series C) on-lock and lock types are standard for manual release. Specifications Fluid ir Proof pressure 1. MPa Maximum operating pressure 1. MPa Minimum operating pressure.1 MPa Without auto switch: 1 to C (With no freezing) mbient and fluid temperature With auto switch: 1 to 6 C (With no freezing) Piston speed to mm/s Cushion Interchangeable Thread tolerance JIS Class Stroke length tolerance To st +1. : to st : 1 to 1 st : ubrication ot required (on-lube) asic style, xial foot style, Rod side flange style, Head side flange style, Mounting Single clevis style, Double clevis style, Center trunnion style. MPa except locking parts. ock Specifications ock position Holding force (Max.) () acklash Manual release ø 6 Head side end, Rod side end, Double end ø ø ø 1 4 mm or less on-lock type, ock type ø ccessory/for more information, refer to page Made to Order Specifications (For details, refer to page 6--.) Symbol Specifications Change of rod end shape 1 Oversized rod 6 Heat resistant (1 C) C4 1 With heavy duty scraper C6 1 Piston rod, rod end nut made of stainless steel Tie-rod, cushion valve, and tie-rod C nut made of stainless steel C 1 djustable stroke/extension adjustment C djustable stroke/retraction adjustment C Change of trunnion bracket mounting position C1 Change of tie-rod length C Fluoro rubber seal Double clevis pin and double knuckle pin C made of stainless steel C Compact flange made of SS C Double knuckle joint with spring pin C 1 With coil scraper 1: For head side end lock type only : For rod side end lock type only ccessory Standard Option Rod end Clevis ock release bolt Single knuckle Double knuckle Mounting nut pin ( type only) joint joint (With pin) Rod boot asic style xial foot style Rod side flange style Head side flange style Single clevis style Double clevis style Center trunnion style Double clevis and double knuckle joint types are packed with pin, cotter pin and flat washer. Standard Stroke ore size Standard stroke,,,,, 1,,,,,,, 4,,,,,, 1,,,,,,,, 4,, 6,,,,, 1,,,,,,,, 4,, 6, Types with auto switch have different minimum strokes. Please refer to page 6--. Rod oot Material Symbol J K Rod boot materials Max. ambient temperature ylon tarpaulin C eoprene cross C Maximum ambient temperature for the rod boot itself. Minimum Stroke for uto Switch Mounting 1.The minimum stroke for mounting varies with the auto switch type and mounting style of the cylinder. In particular, the center trunnion style needs careful attention. (For more information, please refer to page 6--.) 6--4

3 ir Cylinder: With End ock Series C Weight/luminum Tube (Steel tube) asic weight dditional weight per each mm stroke ccessory ore size asic style xial foot style Flange style Single clevis style Double clevis style Trunnion style ll mounting brackets (Except steel tube trunnion) Steel tube trunnion Single knuckle Double knuckle (With pin) ock Unit dditional Weight Manual release on-lock type () Manual release lock type () ore size Head side end lock (H) Rod side end lock (R) Double end lock (W) Head side end lock (H) Rod side end lock (R) Double end lock (W) (kg). (.4) 1. (1.1) 1.6 (1.) 1. (1.) 1. (1.) 1. (1.). (.) (.6) Calculation: (Example) C--H asic weight 1.kg (ø xial foot style) dditional weight./ st Cylinder stroke st ock weight. kg (Head side end lock, Manual release, on-lock) x / +. = 1.4 kg 1.6 (1.) 1. (1.6) 1.1 (1.6) 1. (1.4) 1. (1.4) 1.4 (1.4). (.) (.46) (.4).4 (.). (.4). (.6). (.). (.). (.4) (.6).6.4 Values inside the parentheses are those for the steel tube type (.) 4.1 (4.) 4. (.) 4. (4.4) 4. (.). (.). (.) (.6) (.).6 (6.6) 6. (6.) 6.6 (6.6). (.).1 (.4).6 (.) (1.). 1. (kg) The minimum stroke for auto switch mounting, proper auto switch mounting position and height, operating range, applicable auto switches, auto switch mounting brackets and their part numbers, and bracket part numbers are the same as those for the double acting single rod type of Series C. CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6--4

4 Series C Construction Head side t# yq #4 # eu# r#1!# i! #6!4! o!! Manual release non-lock Manual release lock type: Suffix Component Parts o. Description Material ote o. Description Material ote q w e r t y u i o!!1!!!4 Rod cover Head cover Cylinder tube Piston Piston rod ushing Cushion ring Tie-rod Tie-rod nut Spring washer Snap ring Cushion valve Rubber magnet* ock piston luminum die-casted luminum die-casted luminum alloy luminum alloy Carbon steel ead-bronze casted Rolled steel Carbon steel Rolled steel Steel wire Spring steel Steel wire R Carbon steel Metallic painted Metallic painted Hard anodized Chromated Hard chromium electroplated Electroless nickel plated Corrosion resistant chromated ickel plated Chromated ickel plated With auto switch Quench hard # #1 # # #4 # #6 M/O knob M/O bolt M/O spring Stopper ring Cushion valve seal Rod end nut Rod seal Piston seal Cylinder tube gasket Piston gasket Cushion seal Wear ring ock piston seal Zinc die-casted Chromium molybdenum steel Steel wire Carbon steel R Rolled steel R R R R R Resin R lack coated lack zinc chromated Zinc chromated Zinc chromated ickel plated! ock bushing ead-bronze casted!6 ock spring Stainless steel Replacement Parts: Seal Kit! umper Urethane ore size Seal kit no.! C-ring Steel wire Zinc chromated Single end lock Double end lock Content! Seal retainer Rolled steel Zinc chromated M-PS Cushion ring nut Chromium molybdenum steel Quench hard chrome plated M-PS M-PS-W Consists of numbers #, Hexagon socket head cap screw Chromium molybdenum steel lack zinc chromated M-PS M-PS-W #, #4, Rubber cap Chloroprene rubber M-PS M-PS-W #6 above. Cap luminum casted lack coated M-PS M-PS-W Cap Carbon steel lack coated, Tufftride The seal kits consist of items #, #1, #, #4 and #6. Please order them by using the seal kit number corresponding to each bore size

5 ir Cylinder: With End ock Series C asic Style (Dimensions are common to rear end lock, front end lock and double end lock types.) Head side end lock: C ore size Width across flats K MM G -P (Rc, PT, G) Stroke -H G D Manual release (on-lock type): Suffix J W ørf Manual release (ock type): Suffix ømo D HR øe ød Width across flats 1 Rod side end lock: C ore size Width across flats K MM øe ød Width across flats 1 Double lock: C Width across flats K MM øe ød H1 K H H1 K H F F G D ore size G D -cushion valve Width across flats of hexagon hole W S + Stroke -P (Rc, PT, G) Stroke -R -cushion valve Width across flats of hexagon hole W S + Stroke Stroke -W -P (Rc, PT, G) G G D M M øe C Manual release (on-lock type): Suffix W J ørf øe C HR Manual release (on-lock type): Suffix W J ørf øe HR H ømo D ømo D H Manual release (ock type): Suffix Manual release (ock type): Suffix H CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP Width across flats 1 With rod boot H1 K H F -cushion valve Width across flats of hexagon hole W S + Stroke M C CM C øe l f h + l + l + Stroke ore size Stroke range up to up to 6 up to 6 up to up to With Rod oot ore size Stroke range to to 6 to 6 to to C e D D E f.... h F 1 1 l G 1 1/4 stroke 1/4 stroke 1/4 stroke 1/4 stroke 1/4 stroke H H1 H HR (MX) J K K M MM MO P RF S W W M x 1. M x M x 1. M1 x 1. 1/4 / M1 x M x 1... M x M1 x 1. M x 1. M6 x 1. 1 / 1/ 1/ For more information about the rod end nut and accessories, refer to page Dimensions of the mounting brackets are the same as those of the standard double acting single rod type. Refer to pages 6-- to. 6--4

6 Series C Precautions e sure to read before handling. Refer to pages 6- to 6 for Safety Instructions and ctuator Precautions. Use the Recommended Pneumatic Circuit. They are required to engage and disengage the locks correctly. Head side end lock Operation 1. Do not use a position solenoid valve. void using this cylinder in combination with a position solenoid valve (particularly the closed center metal seal type). If air pressure becomes sealed inside the port on the side that contains the lock mechanism, the lock will not engage. Even if the lock is engaged at first, the air that leaks from the solenoid valve could enter the cylinder and cause the lock to disengage as time elapses.. ack pressure is required when releasing the lock. efore starting, make sure that air is supplied to the side that is not equipped with a lock mechanism as shown in the diagram above (or the side on which the piston rod is unlocked, if both sides are equipped with a lock). Otherwise, the lock may not disengage.. Release the lock when mounting or adjusting the cylinder. The lock may not disengage if the cylinder is installed with its lock engaged. 4. Operate with a load ratio of % or less. The lock may not disengage or may become damaged if the load exceeds %.. Do not operate multiple synchronized cylinders. void applications in which two or more end lock cylinders are synchronized to move one work piece, as one of the cylinder locks may not be disengaged when required. 6. Use a speed controller with meter-out control. If operated under meter-in control, the lock may not disengage.. e sure to operate completely to the cylinder stroke end on the side with the lock. The lock may not engage or disengage if the piston in the cylinder has not reached the stroke end. Operating Pressure 1. Supply air pressure of.1 MPa or higher to the port on the side that has the lock mechanism, as it is necessary for disengaging the lock. Exhaust Speed Rod side end lock 1. When the pressure on the side with the lock mechanism drops to. MPa or below, the lock engages automatically. If the piping on the side with the lock mechanism is thin and long, or if the speed controller is away from the cylinder port, the lock engagement may take some due to decline of the exhaust speed. The same result will be caused by clogging of the silencer installed at the EXH port of the solenoid valve. Relation to Cushion 1. When the cushion valve on the side with the lock mechanism is fully closed or almost closed, the piston rod may not be able to reach the stroke end, resulting in lock engagement failure. Furthermore, if the lock becomes engaged while the cushion valve is almost fully closed, it may become impossible to be disengaged. Therefore, the cushion valve must be adjusted properly. Releasing the ock 1.To disengage the lock, make sure to supply air pressure to the port on the side without a lock mechanism, thus preventing the load from being applied to the lock mechanism. (Refer to the recommended air pressure circuit.) If the lock is disengaged, while the port on the side without a lock mechanism is in the exhausted state and the load is being applied to the lock mechanism, undue force may be applied to the lock mechanism, causing the lock mechanism to be damaged. lso, it could be extremely dangerous, because the piston rod could move suddenly. Manual Release 1. on-lock type manual release Insert the bolt, which is provided as an accessory part, through the rubber cap (it is not necessary to remove the rubber cap). Screw the bolt into the lock piston and pull the bolt to disengage the lock. Releasing the bolt will re-engage the lock. The bolt size, pulling force, and the stroke are listed below. ore size Thread size Pulling force Stroke,, M x. x l or more 1, M x. x l or more 4. Remove the bolt for normal operation. It can cause lock malfunction or faulty release.. Manual release lock type Push the M/O knob and turn it counterclockwise. The lock disengages when the mark on the cap is aligned with the OFF mark on the M/O knob (and the lock will remain disengaged). To engage the lock, push the M/O knob all the way in and turn it clockwise to align the mark on the cap with the O mark on the M/O knob. t this time, make sure that the knob stops by clicking into place. Failure to click it into place properly can cause the lock to disengage. ock state Release Rubber cap ock Release state 6--46

7 ir Cylinder: With End ock Series CJ ø Without auto switch With auto switch Mounting Style asic style xial foot style F Rod side flange style D Double clevis style ote) ote) Front end lock only. CJ 4 V 4 V How to Order CDJ 6 H JW uilt-in magnet V C6 6H IC circuit V V, V V V, V C V V Cylinder stroke ø 1,, 4, 6,,,, 1,, Intermediate strokes are available in 1 mm increments without stroke adjustment with a spacer. For types with auto switch, refer to Minimum Strokes for uto Switch Mounting on page H Manual release on-locking type and mounting C CC H1 H H HC HW HPW HW H HF ock position pplicable uto Switch/Refer to page 6--1 for further information on auto switches. Type Reed switch Solid state switch Special function Electrical entry Connector Diagnostic indication (-color) Diagnostic indication (-color) Indicator light Wiring (Output) -wire (Equiv. to P) Yes Connector -wire -wire (P) -wire (PP) -wire -wire (P) -wire (PP) Water resistant -wire V (-color) Diagnostic output (-color) V, V ead wire length symbols:. m il (Example) CC m (Example) CC m Z (Example) CCZ one (Example) CC Yes DC H R Perpendicular Rail mounting C W FV FPV FV JC FWV FWV FV Head end lock Rod end lock uto switch Refer to the table below for applicable auto switch. Rail mounting type auto switches are not mounted and are supplied loose at the time of shipment. For cylinders with built-in magnet and without auto switch, refer to How to Order for cylinders with built-in magnet. oad voltage uto switch model ead wire length (m) In-line H H F FP J FW FPW JW F FF. (il) uilt-in Magnet Cylinder Model Suffix the symbol - (Rail mounting style) or - (and mounting style) to the end of part number for cylinder with auto switch. Rail mounting style Example and mounting style () (Z) one () Pre-wire connector umber of auto switches il S pplicable load IC circuit IC circuit IC circuit pcs. 1 pc. n pcs. Replay, PC Replay, PC Solid state switches marked with are manufactured upon receipt of order. Model W cannot be mounted on a ø1 cylinder with air cushion. In addition to the models in the above table, there are some other auto switches that are applicable. For more information, refer to page 6--. CDJ-4- CDJ-6- For rail mounting style, screws and nuts for pcs. switches come with the rail. CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6--

8 Series CJ Series CJ air cylinder is equipped with end lock function. Maintains the cylinder s original position even if the air supply interrupted. When air is discharged at the stroke end position, the lock engages to maintain the rod in that position. Specifications ction Fluid Proof pressure Maximum operating pressure Minimum operating presuure mbient and fluid temperature Cushion ubrication Thread tolerance Stroke tolerance Piston speed llowable kinetic energy With no freezing ock Specifications ock position Holding force (Max.) ock release pressure acklash Manual release Double acting, Single rod ir 1. MPa. MPa.6 MPa Without auto switch: 1 C to C With auto switch: 1 C to 6 C Rubber bumper ot required (on-lube) JIS Class +1. to mm/s. J Head end, Rod end.1 MPa or less 1 mm or less on-locking type Standard Stroke ore size Standard stroke 1,, 4, 6,,,, 1,, Intermediate strokes are available in 1 mm increments without stroke adjustment with a spacer. Minimum Strokes for uto Switch Mounting H HW H HF CC CC HC (Same side) (Different sides) (Same side) (Different sides) 1 (Same side) (Different sides) (Same side) (Different sides) 1 (Same side) (Different sides) (Same side) (Different sides) 1 Other than the applicable auto switches listed in How to Order, the following auto switches can be mounted. For detailed specifications, refer to page Type Model Electrical entry Features Reed switch Solid state switch H C C CC FT Connector Connector Without indicator light With timer FT is also available with pre-wire connector. 6-- uto switch uto switch mounting style model and mounting style (ø) C C umber of auto switches Min. cylinder stroke uto switch uto switch umber of mounting auto style model switches Rail mounting style (ø) C C H H W F J FV JC FW JW F FF FWV FV Min. cylinder stroke

9 ir Cylinder: With End ock Series CJ Dimensions asic style With rod end lock: CJ- -R. ø M x. h. M1 x 1 Piping port -M x. ø1. CJ1 CJP CJ ø6 CM Stroke. CG1. + Stroke M M1 C CS1 C6 C C With head end lock: CJ- -H CP CM ø M x. h-. -M1 x 1 Piping port -M x. ø1 6. C ø Stroke 6 + Stroke 6--

10 Series CJ Dimensions Flange style With rod end lock: CJF- -R Cover side (Rod side) M x. M1 x 1 ø6. Piping port -M x. ø. 4 -ø. Mounting hole Stroke. + Stroke. 1.. Cover outside diameter With head end lock: CJF- -H Cover side (Head side) -M1 x 1 M x. ø Piping port -M x. 6. ø 4 -ø. Mounting hole Stroke 6 + Stroke 1.. Cover outside diameter 6--

11 ir Cylinder: With End ock Series CJ xial foot style With rod end lock: CJ- -R Cover side (Rod side) M x. M1 x 1 Piping port -M x. ø6.. ø CJ1 CJP CJ 4 -ø. Mounting hole Stroke. + Stroke. 1.. CM CG1 M M1 C CS1 C6 C C With head end lock: CJ- -H CP CM C Cover side (Head side) M x. -M1 x 1 ø Piping port -M x. 6. ø. 4 -ø. Mounting hole Stroke 6 + Stroke

12 Series CJ Dimensions Double clevis style With rod end lock: CJD- -R. ø M x. ø6. Piping port -M x.. +. øh. Clevis pin (ød.6) ø Stroke 1. + Stroke. + Stroke

13 ir Cylinder: With End ock Series CJ e sure to read before handling. Please consult with SMC for products outside these specifications. Use Recommended ir Pressure Circuit. It is necessary for proper locking and unlocking. With rear lock With front lock Operating Precautions 1. Do not use a position solenoid valve. void using this cylinder in combination with a position solenoid valve (particularly the closed center metal seal type). If air pressure becomes sealed inside the port on the side that contains the lock mechanism, the lock will not engage. Even if the lock is engaged at first, the air that leaks from the solenoid valve could enter the cylinder and cause the lock to disengage as time elapses.. ack pressure is necessary for unlocking. efore starting, make sure that air is supplied to the side that is not equipped with a lock mechanism as shown in the diagram above. Otherwise, the lock may not disengage. (Refer to Rock Disengagement.). Disengage the lock before installing or adjusting the cyliner. The lock could become damaged if the cylinder is installed with its lock engaged. 4. Operate the cylinder at a load ratio of % or less. The lock might not disengage or might become damaged if a load ratio of % is exceeded.. Do not synchronize multiple cylinders. Do not operate two or more end lock cylinders synchronized to move a single workpiece because one of the cylinder locks may not be able to disengage when required. 6. Operate the speed controller under meter-out control. If operated under meter-in control, the lock might not disengage.. On the side that has a lock, make sure to operate at the stroke end of the cylinder. The lock might not engage or disengage if the piston of the cylinder has not reached the stroke end.. The position adjustment of the auto switch should be performed at two positions; a position determined by the stroke and a position after the backlash movement (by 1 mm). When a -color indication switch is adjusted to show green at the stroke end, the indication may turn red when the cylinder returns by the backlash. This, however, is not an error. Precautions Operating Pressure Supply air pressure of.1 MPa or higher to the port on the side that has the lock mechanism, as it is necessary for disengaging the lock. Exhaust ir Speed The lock will engage automatically if the air pressure at the port on the side that has the lock mechanism becomes. MPa or less. e aware that if the piping on the side that has the lock mechanism is narrow and long, or if the speed controller is located far from the cylinder port, the exhaust air speed could become slower, involving a longer time for the lock to engage. similar result will ensure if the silencer that is installed on the exhaust port of the solenoid valve becomes clogged. Warning ock Disengagement To disengage the lock, make sure to supply air pressure to the port on the side without a lock mechanism, thus preventing the load from being applied to the lock mechanism. (Refer to the recommended air pressure circuit.) If the lock is disengaged when the port on the side that does not contain a lock mechanism is in the exhausted state and the load is being applied to the lock mechanism, undue force will be applied to the lock mechanism, and it may damage the lock mechanism. lso, it could be extremely dangerous, because the piston rod could move suddenly. Manual Disengagement on-locking style manual release Insert the bolt, which is provided as an accessory part, through the rubber cap (it is not necessary to remove the rubber cap). Screw the bolt into the lock piston and pull the bolt to disengage the lock. Releasing the bolt will re-engage the lock. The bolt size, pulling force, and the stroke are listed below. ore size Thread size Pulling force Stroke M. x.4 x l or more 4. olt should be detached under normal operation, otherwise it may cause malfunction of the locking feature. Rubber cap CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6--

14 ir Cylinder: With End ock Series CM ø, ø, ø, ø Without auto switch With auto switch F G C D U T uilt-in magnet Mounting style asic style xial foot style Rod side flange style Head side flange style Single clevis style Double clevis style Rod side trunnion style Head side trunnion style CM CDM Cylinder stroke (Refer to Standard Stroke on page 6-4-.) uilt-in Magnet Cylinder Model ore size mm mm mm mm If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. Example) CDM--H ead wire length symbols:. m il (Example) CC m (Example) CC m Z (Example) CCZ one (Example) CC Type Special function Electrical Wiring entry (Output) Diagnostic indication (-color indication) Diagnostic indication (-color indication) Water resistant (-color indication) Water Diagnostic output (-color indication) -wire (P) How to Order 1 H 1 H HW il oad voltage V, V Cushion Rubber bumper ir cushion pplicable uto Switch/Refer to page 6--1 for further information on auto switches. Reed switch Solid state switch Connector Terminal conduit DI terminal Connector Terminal conduit Indicator light Yes Yes HF il S n uto switch umber of auto switches pcs. 1 pc. n pcs. il Without auto switch For the applicable auto switch model, refer to the table below. Manual release type ock position H R W Rod boot il J K on-lock type ock type Head end lock Rod end lock Double end lock one ylon tarpaulin Heat resistant tarpaulin ead wire length (m) DC C uto switch Pre-wire model. connector (il) () (Z) one () pplicable load -wire (P equivalent) V C6 IC circuit V C -wire 4 V V, V 4 Relay, PC CC V PC 4 V, V 44 Relay, PC W -wire (P) H1 V, V -wire (PP) H IC circuit -wire V H HC -wire (P) V, V G IC circuit -wire V K -wire (P) 4 V HW Relay, V, V IC circuit PC -wire (PP) HPW HW -wire V H Since there are other applicable auto switches than listed above, refer to page for details. For details about auto switches with pre-wire connector, refer to page IC circuit Solid state switches marked with are produced upon receipt of order. Do not indicate suffix for no lead wire on /44/G/K models. /44/G/K/4 cannot be mounted on bore sizes ø and ø cylinder with air cushion CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C

15 Series CM Holds the cylinder s home position even if the air supply is cut off. When air is discharged at the stroke end position, the lock engages to maintain the rod in that position. on-lock type and lock type are standardized for manual release. uto switch is mountable. Specifications Type ction Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Cushion ubrication Thread tolerance Stroke length tolerance Piston speed Mounting. MPa for other part than the lock unit ock Specifications ock position Holding force (Max.) () acklash Manual release Pneumatic Double acting, Single rod ir 1. MPa 1. MPa.1 MPa Without auto switch: 1 to C (o freezing) With auto switch: 1 to 6 C (o freezing) Rubber bumper, ir cushion ot required (on-lube) JIS Class +1.4 mm Rubber bumper to mm/s ir cushion to mm/s asic style, xial foot style, Rod side flange style, Head side flange style, Single clevis style, Double clevis style, Rod side trunnion style, Head side trunnion style ø Head end, Rod end, Double end ø ø 1 mm or less on-lock type, ock type ø 6 llowable Kinetic Energy Rubber cushion ir cushion ore size llowable kinetic energy (J) Effective cushion length Cushion sectional area (cm ) Kinetic energy absorbable (J) Symbol 6 C C4 C C1 C C C Made to Order Specifications (For details, refer to page 6--1.) Specifications Change of rod end shape Heat resistant cylinder (1 C) ow speed cylinder (1 to mm/s) Special port location With heavy duty scraper djustable stroke cylinder/djustable extension type uto switch mounting rail style Fluoro rubber seals With coil scraper Mounting nut with set screw vailable only for locking at head end Standard Stroke ore size Standard stroke,,,,, 1,, ong stroke 4 4 Minimum Stroke for uto Switch Mounting uto switch model C C H HW H HF CC CC HC /6 GT Different sides Maximum manufacturable stroke ong stroke applies to the axial foot style and the rod side flange style only. When using other types of mounting brackets or exceeding the long stroke limit, the maximum allowable stroke will be determined by the stroke selection table listed on page W G K 44 o. of auto switches mounted n Same side Different sides Same side ( n ) (n =, 4, 6...) 1 + ( n ) (n =, 4, 6...) 1 + ( n ) (n =, 4, 6...) + ( n ) (n =, 4, 6...) + 4 (n ) (n ) 6 + (n ) + (n ) + (n ) + (n )

16 ir Cylinder: With End ock Series CM ccessory/for details, refer to pages 6-4- to, since it is the same as Series CM standard type. Standard equipment Option Mounting nut, Rod end nut, Clevis pin, ock release bolt ( type only) Single knuckle joint, Double knuckle joint (With pin) Mounting nuts are not equipped to single clevis and double clevis. Rod oot Material Symbol Rod boot material Max. ambient temperature J ylon tarpaulin 6 C K Heat resistant tarpaulin C * Maximum ambient temperature for the rod boot itself. Weight asic weight ore size asic style xial foot style Flange style Single clevis Double clevis style Trunnion style dditional weight per each mm of stroke ccessory Clevis bracket (With pin) Single knuckle joint Double knuckle joint (With pin) (kg) ock Unit dditional Weight (kg) ore size Head end lock (H)....4 Manual release Rod end lock (R) non-lock type () Double end lock (W)....6 Head end lock (H)....6 Manual release Rod end lock (R)....4 lock type () Double end lock (W)....1 Calculation: (Example) CM--H asic weight.44 (Foot style, ø) dditional weight./ stroke Cylinder stroke stroke ocking weight. (ocking at head end, Manual release non-locking type) x / +. =.6 kg uto Switch Mounting racket Part o. uto switch ore size model C/C H /64 GT /44 G/K M- - M- M- - M- M- - M- M- - M- Mounting screws set made of stainless steel Use the following mounting screw set made of stainless steel according to operating environment. ( switch mounting band is not included, so please order it separately.) 4: For C/C/H : For /6/G H switch is set on the cylinder with the stainless steel screws above when shipped. When only a switch is shipped independently, 4 screws are attached. CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C Mounting racket Part o. ore size xial foot CM- Flange CM-F Single clevis CM-C Double clevis (With pin) CM-D Trunnion (With nut) CM-T CM- CM-F CM-C CM-D CM-T CM- CM-F CM-C CM-D CM-T Two foot brackets and a mounting nut are attached. Order two foot brackets per cylinder. Clevis pin and snap ring are shipped together with double clevis style. 6-4-

17 Series CM Construction Head end lock Manual release (on-lock type): Suffix Manual release (ock type): Suffix Rod end lock With air cushion Component Parts o. q w e r t y u # #1 # Description Rod cover Head cover Cylinder tube Piston Piston rod ushing Seal retainer Snap ring ock piston ock bushing ock spring umper Hexagon socket head cap screw Cap Cap Rubber cap M/O knob M/O bolt M/O spring Stopper ring umper umper Snap ring Piston seal Piston gasket Wear ring Mounting nut Rod end nut Cushion ring Cushion valve Cushion seal Material luminum alloy luminum alloy Stainless steel luminum alloy Carbon steel Oil-impregnated sintered alloy Rolled steel plate Carbon steel Carbon steel ead-bronze casted Stainless steel Urethane lloy steel luminum die-casted Carbon steel Synthetic rubber Zinc die-casted lloy steel Steel wire Carbon steel Urethane Urethane Stainless steel R R Resin Carbon steel Carbon steel Rolled steel Rolled steel Urethane ote o. Description Material ote Clear anodized # Rod seal ock piston seal Cushion valve seal R R R Chromated Hard chrome plated #4 # Snap ring Steel balls Stainless steel Stainless steel ickel plated ickel plated Hard chrome plated, Heat treated lack zinc chromated lack painted Oxide film treated lack painted lack zinc chromated Zinc chromated Zinc chromated ickel plated ickel plated Electroless nickel plated Electroless nickel plated Replacement Parts: Seal Kit (With lock in single end) ore size Kit no. CM-PS Double End ock CM--PS CM--PS CM--PS Kit no. CM-PS-W CM--PS-W CM--PS-W CM--PS-W Seal kit Order the seal kit, based on each bore size. (Except #.) How to Change Seal Kit <Removal> Remove the snap ring by using a tool for installing a type C snap ring for hole. Shut off the port on the rod cover by finger and then pull out the piston rod, and the seal retainer and the rod seal C are removed. <Mounting> Port fter applying enough grease on the rod seal, attach in this order, rod seal C, seal retainer and snap ring. () Seal retainer () Snap ring (C) Rod seal 6-4-4

18 ø ir Cylinder: With End ock Series CM asic Style (Dimensions are common irrespective of the lock position; rod end, head end, or double end.) Head end lock: CM ore size Stroke -H Width across flats -Rc P ø Width across flats 1 ø ø CJ1 1 S + Stroke ø Manual release (on-lock type): Suffix CJP CJ CM Rod end lock: CM ore size Stroke -R ø CG1 M M1 C Double end lock: CM ore size Stroke -W Manual release (ock type): Suffix CS1 C6 C C With rod boot Width across flats CP CM C øe h l f With Rod oot 1 to 1 to 4 to to 1 1 to to 6 1 to ore size Symbol Stroke range Up to Up to Up to Up to With Rod oot ore size Symbol e 1 4 f D 1 D For details about the rod end nut and accessory, refer to pages 6-4- to E.... F G H H1 6 6 H 1 HR H (Max.) I K.. MM M x 1. M1 x 1. M1 x 1. M x 1. MO M x 1. M6 x 1. M6 x 1. M x h l 1 to 1 to to 1 to to 1 to 1 to 1 to 1 to to 1 to to 1 to 1 to P 1 / 1 / 1 / 1 / 4 S

19 Series CM With Mounting racket (For dimensions not indicated below, refer to page 6-4-.) xial foot style: CM ore size Stroke -H -R -W ø ø Rod side flange style: CMF ore size -øfd Mounting hole S + Stroke 4-øFD Mounting hole Stroke -H -R -W Head side flange style: CMG ore size Stroke -H -R -W Z + Stroke ø to ø ø Single clevis style: CMC ore size Stroke -H -R -W ø Z + Stroke Double clevis style: CMD ore size Stroke -H -R -W øcd hole H1 xis d ø Z + Stroke Rod side trunnion style: CMU ore size Stroke -H -R -W ø Head side trunnion style: CMT ore size Stroke Clevis pin and snap ring (cotter pin for bore size ) are shipped together. -H -R -W ø ø Z + Stroke ore xial foot style Flange style Clevis style Trunnion style size Stroke Stroke range Z Stroke Stroke Z C D H S T X Z X Y Z C range FD FT FX FY FZ range CD CX CZ RR U Z range TD TT TX TY TZ Rod side Head side Rod side Head side Rod side Head side Rod side Head side Up to Up to 4 4 Up to Up to Up to 4 1 Up to 4 Up to Up to 4 Up to Up to Up to Up to Up to 6 Up to Up to Up to Up to Up to Up to Up to Dimensions except mentioned above are the same as standard type. Precautions on Trunnion Style, Flange Style 1. Trunnion style a With lock in rod side of the rod side trunnion style s With lock in head side of the head side trunnion style d With lock in both sides. For above cases, use caution since the trunnion pin and fittings may be interfered with each other because the trunnion pin and port are very closed to each other.. Flange style (ø to ø) a With lock in rod side of the rod side flange style s With lock in head side of the head side flange style d With lock in both sides. For above cases, use caution since the bolt for mounting a cylinder and fittings may be interfered with each other. Refer to Special Port Position in Made to Order Specifications on page

20 ir Cylinder: With End ock Series CM With ir Cushion (Dimensions not mentioned in the below table are the same as the above table.) asic style Head end lock: CM ore size Stroke -H R Cushion valve Width across hexagon socket hole 1. xial foot style: CM ore size S + Stroke Stroke Rod side flange style: CMF ore size -H -R -W Stroke Single clevis style: CMC ore size Stroke -H -R Z + Stroke Rod side trunnion style: CMU ore size Stroke -H -R -W S + Stroke With ir Cushion ore size -W Head end lock -H -R -W ø Manual release (on-lock type): Suffix S Rod end lock 6 Double end lock W Head side flange style: CMG ore size Stroke Z + Stroke -H -R -W Double clevis style: CMD ore size Stroke -H -R Head side trunnion style: CMT ore size Stroke W Z + Stroke Head end lock H -R -W Rod end lock 1 Double end lock 1 1 -W CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C Z + Stroke ore size Head end lock S Rod end lock xial foot style Double end lock Head end lock 1 6 Rod end lock 6 Double end lock 14 Head end lock Head side flange style Z Rod end lock 4 Double end lock ore size Head end lock 1 Z Rod end lock Double end lock 1 1 Clevis style Head end lock Rod end lock 1 6 Double end lock 1 Head end lock. Z Rod end lock. Head side trunnion style Double end lock 1 1. Head end lock Rod end lock 1 1 Double end lock 6-4-

21 Series CM Proper uto Switch Mounting Position (Detection at stroke end) and Its Mounting Height Reed switch Solid state switch C/C H/HW/HF/H Hs Hs uto switch uto switch /64/W Hs GT Hs uto switch uto switch /4 Hs G 1/ (pplicable cable O.D. ø6. to ø.6) G/K Hs G 1/ (pplicable cable O.D. ø6. to ø.6) uto switch uto switch 44 Hs uto switch HC Hs uto switch CC/CC Hs uto switch Proper uto Switch Mounting Position uto switch model ore size 1() 1() () 64 () () 1() 6 () () (6) 1 uto Switch Mounting Height 64 W GT HC Hs. 1.. C C H HW H HF Hs... CC CC Hs. 1 C C CC CC G K Hs (4) 6(4) () 44 Hs 6... W 4() 4() () 1 (1) (1) 4() G K 44.().() 1.() 6. () ().(). H HC HW H HF 6(4) 6(4) () () () 6(4) GT.(.).(.).(1.). 1.() 1.().(.). ( ): Denotes the values with air cushion /6//44/G and K cannot be mounted on bore size ø and ø cylinder with air cushion. 6-4-

22 ir Cylinder: With End ock Series CM Operating Range uto switch model C/C CC/CC /44 /64 W H, H/HW/HF HC G/K GT ore size Since this is a guideline including hysteresis, not meant to be guaranteed. (ssuming approximately ±% dispersion) There may be the case it will vary substantially depending on an ambient environment. Other than the applicable auto switches listed in How to Order, the following auto switches can be mounted. For detailed specifications, refer to page Type Model Electrical entry Features Reed switch C CC Connector Without indicator light 64 Without indicator light Solid state switch GT With timer With pre-wire connector is available for GT type, too. Refer to page 6-- for details. Wide range detection type, solid state auto switch (G type) is also available. For details, refer to page 6--. CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6-4-

23 Series CM Precautions e sure to read before handling. For Safety Instructions and ctuator Precautions, refer to pages 6- to 6. Use the Recommended Pneumatic Circuit This is necessary for proper operation and release of the lock. Head end lock Operating Precautions Rod end lock 1. Do not use position solenoid valves. void use in combination with position solenoid valves (especially closed center metal seal types). If pressure is trapped in the port on the lock mechanism side, the cylinder cannot be locked. Furthermore, even after being locked, the lock may be released after some time, due to air leaking from the solenoid valve and entering the cylinder.. ack pressure is required to release end lock. e sure air is supplied to side of cylinder without the locking mechanism, as above, prior to supplying air pressure to the side with end lock or lock may not be released. (Refer to Releasing the ock.). Release the lock when mounting or adjusting the cylinder. If mounting or other work is performed when the cylinder is locked, the lock unit may be damaged. 4. Operate with a load ratio of % or less. If the load ratio exceeds %, this may cause problems such as failure of the lock to release, or damage to the lock unit.. Do not operate multiple cylinders in synchronization. void applications in which two or more end lock cylinders are synchronized to move one workpiece, as one of the cylinder locks may not be able to release when required. 6. Use a speed controller with meter-out control. ock cannot be released occasionally by meter-in control.. e sure to operate completely to the cylinder stroke end on the side with the lock. If the cylinder piston does not reach the end of the stroke, locking might not work or locking might not be released. Warning Operating Pressure 1. Use pressures over.1 MPa at port with locking mechanism. Exhaust Speed 1. ocking will occur automatically if the pressure applied to the port on the lock mechanism side falls to. MPa or less. In cases where the piping on the lock mechanism side is long and thin, or the speed controller is separated at some distance from the cylinder port, the exhaust speed will be reduced. Take note that some time may be required for the lock to engage. In addition, clogging of a silencer mounted on the solenoid valve exhaust port can produce the same effect. Relation to Cushion 1. When cushion valve at side with locking mechanism is fully opened or closed, piston rod may reached at stroke end. Thus lock is not established. nd when locking is done at cushion valve fully closed, adjust cushion valve since lock may not be released. Releasing the ock 1. efore releasing the lock, be sure to supply air to the side without the lock mechanism, so that there is no load applied to the lock mechanism when it is released. (Refer to the recommended pneumatic circuits.) If the lock is released when the port on the other side is in an exhaust state, and with a load applied to the lock unit, the lock unit may be subjected to an excessive force and be damaged. Furthermore, sudden movement of the piston rod is very dangerous. 6-4-

24 ir Cylinder: With End ock Series CM Precautions e sure to read before handling. For Safety Instructions and ctuator Precautions, refer to pages 6- to 6. Manual Release 1. Manual release (on-lock type) Insert the accessory bolt from the top of the rubber cap (it is not necessary to remove the rubber cap), and after screwing it into the lock piston, pull it to release the lock. If you stop pulling the bolt, the lock will return to an operational state. Thread sizes, pulling forces and strokes are as shown below. ore size,,,,, Thread size M. x.4 x l or more M x. x l or more M x. x l or more Pulling force Remove the bolt for normal operation. It can cause lock malfunction or faulty release. Rubber cap Stroke. Manual release (ock type) While pushing the M/O knob, turn it counterclockwise. The lock is released (and remains in a released state) by aligning the mark on the cap with the OFF mark on the M/O knob. When locking is desired, turn M/O button clockwise while pushing fully, correspond on cap and O mark on M/O button. The correct position is confirmed by a click sound click. If not confirmed, locking is not done. Unlock ock Working Principle Head end lock (Rod end lock is the same, too.) 1. When the piston rod is getting closer to the stroke end, the taper part ( ) of the piston rod edge will push the lock piston up. Pressure Piston rod. ock piston is pushed up further.. ock piston is pushed up into the groove of piston rod to lock it. (ock piston is pushed up by spring force.) t this time, it is exhausted from port in head side and introduced to atmosphere. ocked Spring ock piston 4. When pressure is supplied in the head side, lock piston will be pushed up to release the lock. ack pressure CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C Pressure Exhaust ocked Released Released. ock will be released, then cylinder will move forward. Pressure 6-4-

25 Compact Cylinder: With End ock Series CQ ø, ø, ø, ø, ø, ø, ø, ø How to Order Without auto switch CQ D C H With auto switch CDQ D C H FW uilt-in magnet Mounting style ø, ø ø to ø F G D Through-hole/oth ends tapped common (Standard) Foot style Rod side flange style Head side flange style Double clevis style F G D Through-hole (Standard)(1) oth ends tapped style Foot style Rod side flange style Head side flange style Double clevis style Mounting brackets are ote 1) t the, and strokes with shipped together, (but not ø, ø, both ends tapped assembled). () is the standard. Throughhole () is not available. ote ) Mounting brackets are shipped together, (but not assembled). mm mm mm mm ore size mm mm mm mm Cylinder stroke For Standard Stroke and Manufacture of intermediate of Stroke, refer to page -6-. ction D Double acting ock position H R ody option C CM Head end lock Rod end lock umber of auto switches il S n pcs. 1 pc. n pcs. uto switch Without auto switch il (uilt-in magnet) For the applicable auto switch model, refer to the table below. Manual release type on-lock type ock type With rubber bumper, Rod end female thread (Standard) With rubber bumper, Rod end male thread pplicable uto Switch/Refer to page --1 for further information on auto switches. Type Special function Reed switch Solid state switch Diagnostic indication (-color indication) Diagnostic indication (-color indication) Electrical entry Water resistant (-color indication) With diagnostic output (-color indication) Connector Connector Indicator light Yes Yes Wiring (Output) -wire (P equivalent) -wire -wire (P) -wire (PP) 4 V -wire -wire (P) -wire (PP) 4 V -wire 4-wire (P) oad voltage DC V V V, V V V, V V V, V ead wire length symbols:. m il (Example) C m (Example) C m Z (Example) CZ one (Example) C C V V Rail mounting ø to ø Perpendicular In-line 6H H H C W FV F FPV FP FV J JC FWV FW FPW FWV JW F FV FF Direct mounting ø to ø Perpendicular In-line 6V V FV FPV FV FWV FPWV FWV 6 F FP F FW FPW FW F ead wire length (m). (il) () (Z) one () Pre-wire connector pplicable load IC circuit IC circuit IC circuit IC circuit Relay, PC Relay, PC Solid state switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed, refer to page -6- for details. For details about auto switches with pre-wire connector, refer to page

26 Compact Cylinder with End ock Series CQ Cylinder Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature ubrication Cushion Rod end thread tolerance Stroke length tolerance Piston speed. MPa except for the lock unit. ock Specifications ock position Holding force (Max.) () Pressure for unlocking acklash Manual release Standard Stroke ore size to, ø ir 1. MPa 1. MPa.1 MPa Without auto switch: 1 to C (o freezing) With auto switch: 1 to 6 C (o freezing) on-lube Rubber bumper on both ends (Standard) JIS Class +1. to mm/s Head end, Rod end ø ø ø ø ø ø ø MPa or less mm or less on-lock type, ock type Standard stroke 1, 1,,,,,,,, CUJ CU CQS CQM CQ RQ MU Manufacture of Intermediate Stroke Description Part no. Description Stroke range Example Spacer is installed in the standard stroke body. Refer to How to Order for the standard model no. on page -6-. Dealing with the stroke by the mm interval is available by installing spacer with standard stroke cylinder. ore size to Stroke range to Part no.: CQ-4DC-H CQ-DC-H with mm width spacer inside. Mounting racket Part o. ore size Foot (1) CQS- CQS- CQ- CQ- CQ- CQ- CQ- CQ- Flange CQS-F CQS-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F Double clevis () CQS-D CQS-D CQ-D CQ-D CQ-D CQ-D CQ-D CQ-D ote 1) When ordering foot bracket, order pieces per cylinder. ote ) Parts belonging to each bracket are as follows. Foot or Flange style: ody mounting bolt, Double clevis style: Clevis pin, snap ring retainer, body mounting bolt. ote ) Clevis pin and snap ring are included with the double clevis style. -6-

27 Series CQ Precautions e sure to read before handling. For Safety Instructions and ctuator Precautions, refer to pages -1- to Use the Recommended Pneumatic Circuit This is necessary for the correct locking and unlocking actions. Head end lock Operating Precautions 1. Do not use position solenoid valves. void use in combination with position solenoid valves (especially closed center metal seal types). If pressure is trapped in the port on the lock mechanism side, the cylinder cannot be locked. Furthermore, even after being locked, the lock may be released after some time, due to air leaking from the solenoid valve and entering the cylinder.. ack pressure is required when releasing the lock. efore starting operation, be sure to control the system so that air is supplied to the side without the lock mechanism as shown in the figure above. There is a possibility that the lock may not be released. (Refer to the section on releasing the lock.). Release the lock when mounting or adjusting the cylinder. If mounting or other work is performed when the cylinder is locked, the lock unit may be damaged. 4. Operate with a load ratio of % or less. If the load ratio exceeds %, this may cause problems such as failure of the lock to release, or damage to the lock unit.. Do not operate multiple cylinders in synchronization. void applications in which two or more end lock cylinders are synchronized to move one workpiece, as one of the cylinder locks may not be able to release when required. 6. Use a speed controller with meter-out control. ock cannot be released occasionally by meter-in control.. e sure to operate completely to the cylinder stroke end on the side with the lock. If the cylinder piston does not reach the end of stroke, locking and unlocking may not be possible.. djust the position of an auto switch, so that it could work at the both positions where it is distanced from the stroke and a backlash ( mm). When a -color indication switch is adjusted for green indication at the stroke end, it may change to red for the backlash return, but this is not abnormal. Operating Pressure Rod end lock 1. Supply air pressure of.1 MPa or higher to the port on the side that has the lock mechanism, as it is necessary for disengaging the lock. Exhaust Speed 1. When the pressure on the side with the lock mechanism drops to. MPa or below, the lock engages automatically. If the piping on the side with the lock mechanism is thin and long, or if the speed controller is away from the cylinder port, the lock engagement may take some due to decline of the exhaust speed. The same result will be caused by clogging of the silencer installed at the EXH port of the solenoid valve. Releasing the ock 1. efore releasing the lock, be sure to supply air to the side without the lock mechanism, so that there is no load applied to the lock mechanism when it is released. If the lock is released when the port on the other side is in an exhaust state, and with a load applied to the lock unit, the lock unit may be subjected to an excessive force and be damaged. lso, it is very dangerous because the piston rod will be rushed to move. Manual Release 1. Manual release (on-lock type) Insert the accessory bolt from the top of the rubber cap (it is not necessary to remove the rubber cap), and after screwing it into the lock piston, pull it to release the lock. If you stop pulling the bolt, the lock will return to an operational state. Thread sizes, pulling forces and strokes are as shown below. ore size,,,,, Thread size M. x.4 x l or more M x. x l or more M x. x l or more Remove the bolt for normal operation. It can cause lock malfunction or faulty release. Rubber cap. Manual release (ock type) While pushing the M/O knob, turn it counterclockwise. The lock is released (and remains in a released state) by aligning the mark on the cap with the OFF mark on the M/O knob. When locking is desired, turn M/O button clockwise while pushing fully, correspond on cap and O mark on M/O button. The correct position is confirmed by a click sound click. If not confirmed, locking is not done. Manually locked state Release ock Pulling force () Manually unlocked state Stroke -6-4

28 Compact Cylinder with End ock Series CQ Construction ø to ø CUJ CU Manual release (ock type): Suffix CQS Head end lock Cylinder tube form for ø to ø CQM CQ RQ MU Rod end lock Cylinder tube form for ø or less Cylinder tube form for ø or more ø, ø, Component Parts o. q w e r t y u Part Cylinder tube Piston Piston rod Collar Snap ring ushing Magnet umper umper Piston seal Rod seal Tube gasket ock piston seal Piston gasket ock piston Gasket ock spring umper Head cover ock bolt Hexagon socket head cap screw Rubber cap Cap Cap M/O knob M/O bolt M/O spring Stopper ring Hexagon socket head cap screw Material ote luminum alloy Hard anodized luminum alloy Chromated Carbon steel Hard chrome plated R luminum alloy nodized luminum bearing alloy ø or less, nodized H luminum alloy casting ø or more, Painted after chromated Carbon tool steel Phosphate coated ead-bronze casted R Used for all bore sizes H Used for ø and larger With auto switch Urethane Urethane R R R Using 4 pcs. for ø, R R othing for ø, Carbon steel Quenched, hard chrome plated R Stainless steel Urethane luminum alloy nodized Carbon steel Quenched, Electroless nickel plated lloy steel lack zinc chromated Synthetic rubber luminum casted lack painted Carbon steel Oxide film treated Zinc die-casted lack painted lloy steel Red painted Steel wire Zinc chromated Rolled steel Zinc chromated lloy steel ickel plated -6-

29 Series CQ Dimensions: ø, ø asic style (Through-hole/oth ends tapped common): CQ/CDQ x 4-øO counterbore depth R 1 H thread effective depth C x 4-O effective depth R With head end lock -M x. End lock mechanism Manual release ( on-lock type ) 4 ø D End lock mechanism (Manual release lock type) ø1 øi H K M E M E HR 1 ød Flat washer Q + Stroke + Stroke Q 4-ø through End ock Mechanism Dimensions ore size D DM HR.. H (Max.) 41 With rod end lock End lock mechanism Manual release ( on-lock type ) -M x. DM 4 ø 1 ød 4-ø through Flat washer Q F + Stroke + Stroke Rod end male thread H1 ore size Standard stroke C1 X H1 1 C1 X 1, 1,,,, 1, 1,,,, 1. M x 1. M1 x ore size Standard stroke 1, 1,,,, 1, 1,,,, With head end lock With rod end lock F C D 1 E 6 H M x. M6 x 1. I 4 K 1 M..4.4 O M6 x 1. M6 x 1. O Q R 1 1 R -6-6

30 Compact Cylinder with End ock Series CQ Dimensions: ø, ø Foot style: CQ/CDQ Special cap bolt H Y X 4-øD Z Rod end male thread + Stroke T XY YX G S + Stroke + Stroke Foot Style ore size ore size Standard stroke 1, 1,,,, 1, 1,,,, Standard stroke 1, 1,,,,, With head end lock S D G 4 4 With rod end lock S H 4 6 T.. X 4 Y 4 46 Z 6 66 X. 1. Y.. CUJ CU CQS CQM FX FZ Rod end nut Rod side flange style: CQF/CDQF FV -øfd Rod end male thread 1 FT + Stroke + Stroke Rod Side Flange Style ore size ore size Standard stroke 1, 1,,,, 1, 1,,,, Standard stroke 1, 1,,,,, With head end lock With rod end lock FD FT FV 4 FX 4 FZ CQ RQ MU Rod end nut 1 Head side flange style: CQG/CDQG + Stroke + Stroke FT FX FZ FV -øfd Head Side Flange Style ore size ore size Standard stroke 1, 1,,,, 1, 1,,,, Standard stroke With head end lock FD FT FV FX With rod end lock 6.. FZ , 1,,,,, Rod end nut 1 Rod end male thread Double clevis style: CQD/CDQD CT + Stroke C + Stroke + Stroke CU CW Cap bolt øcd hole H1 Shaft d RR CX CZ Double Clevis Style ore size ore size Standard stroke 1, 1,,,, 1, 1,,,, Standard stroke 1, 1,,,,, With head end lock With rod end lock. 61 C C CD 1 CT CU CW 1 CX 1 CZ RR 1 Rod end nut 1 Rod end male thread -6-

31 Series CQ Dimensions: ø to ø asic style (Through-hole): CQ/CDQ H thread effective depth C W oth ends tapped style: CQ/CDQ O1 thread R1 R1 D 4- ø through Head end lock x 4- øo counterbore depth R End lock mechanism ørf Manual release ( on-lock type ) ore size Rod end lock DM O1 M6 x 1. M6 x 1. M x 1. M1 x 1. M x 1. M x 1. R øi Z M E ød HR K M E W J -P (Port size) Q + Stroke + Stroke Q Q + Stroke + Stroke F End ock Mechanism Dimensions ø, ø, ø Cylinder tube form End lock mechanism (Manual release lock type) ømo H ore size D DM HR H (Max.) MO 1 W RF Rod end male thread H1 C1 X 1 ore size Standard stroke 1, 1,,,,,,,, C X H1 M x 1. M x 1. M1 x 1. M1 x 1. M x 1. M6 x ore size Standard stroke 1, 1,,,,,,, C D E H M x 1. M x 1. M1 x 1. M1 x 1. M x. M x. I J t the, and strokes with ø,, both ends tapped () is the standard. Through-hole () is not available. With Head End ock ore size -6- Standard stroke 1, 1,,,,,,,, Q K M With Rod End ock ore size Standard stroke 1, 1,,,,,,,, O P Rc 1/ Rc 1/ Rc 1/4 Rc 1/4 Rc / Rc / F R W Z 6 6 Q

32 Compact Cylinder with End ock Series CQ Dimensions: ø to ø Foot style: CQ/CDQ Foot Style H Y X 4-øD Z Rod end male thread X Y + Stroke T Y S + Stroke + Stroke X Special cap bolt G ore size ore size Standard stroke 1, 1,,,,,,,, Standard stroke 1, 1,,,,,,, With head end lock G H S T With rod end lock S X 64 Y Z X Y.. D CUJ CU CQS CQM CQ RQ MU Rod end nut 1 Rod side flange style: CQF/CDQF Rod Side Flange Style FX FZ M FV 4-øFD FT + Stroke + Stroke ore size Standard stroke 1, 1,,,,,,,, With head end lock With rod end lock FD FT FV FX FZ 6 1 ore size Standard stroke 1 M Rod end male thread Rod end nut 1 1, 1,,,,,,,

33 Series CQ Dimensions: ø to ø Head side flange style: CQG/CDQG M FV 4-øFD + Stroke FT FX + Stroke FZ Rod end male thread Head Side Flange Style ore size Standard stroke 1, 1,,,,,,,, With head end lock With rod end lock ore size Standard stroke M FD FT FV FX FZ 1 Rod end nut 1, 1,,,,, Double clevis style: CQD/CDQD Double Clevis Style + Stroke CW C + Stroke + Stroke CT CU øcd hole H1 Shaft d RR 4- Cap bolt CX CZ ore size ore size Standard stroke 1, 1,,,,,,,, Standard stroke With head end lock With rod end lock CD C C CW CX CZ RR CT CU Rod end male thread 1 Rod end nut 1, 1,,,,,,, M6 x 1. M6 x 1. M x 1. M1 x 1. M x 1. M x

34 Compact Cylinder with End ock Series CQ llowable Kinetic Energy With Rubber umper. MPa.4 MPa llowable ateral oad at Rod End With uto Switch (nti-lateral load) oad weight (kg) 1 1. Maximum speed (mm/s) ø ø ø ø ø ø ø ø llowable lateral load W () Stroke St ø ø ø ø ø ø ø ø CUJ CU CQS CQM CQ RQ MU W (Mounting orientation: Horizontal) -6-

35 ir Cylinder: With End ock Series CG1 ø, ø, ø, ø, ø, ø, ø, ø F G U T D Type CG1 CDG1 uilt-in magnet Mounting style asic style xial foot style Rod side flange style Head side flange style Rod side trunnion style Head side trunnion style Clevis style Special function ot available for bore size ø and ø. esides, trunnion cannot be attached in the side to which an end lock is attached. ote) Mounting brackets are shipped together, (but not assembled). Type Rubber bumper ir cushion ore size mm mm mm mm Electrical entry Indicator light mm mm mm mm Wiring (Output) -wire (P equivalent) -wire DC H H HW Manual release type on-lock type ock type ock position H Head end lock R Rod end lock W Double end lock With rod boot il J K Without rod boot ylon tarpaulin Heat resistant tarpaulin In the case of w/ rod boot, and a foot bracket or rod side flange as a bracket, those parts are to be assembled at the time of shipment. Cylinder stroke Refer to Standard Stroke on page pplicable uto Switch/Refer to page 6--1 for further information on auto switches. Reed switch Solid state switch Connector Diagnostic indication (-color indication) Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Connector Yes Yes -wire (P) -wire (PP) -wire -wire (P) -wire (PP) -wire 4-wire (P) oad voltage C C6 C CC H1 H H HC HW HPW HW H Since there are other applicable auto switches than listed, refer to page for details. For details about auto switches with pre-wire connector, refer to page V 4 V V V V, V V V, V V V, V ead wire length symbols:. m il (Example) CC m (Example) CC m Z (Example) CCZ one (Example) CC How to Order V, V V 4 W G GP K GW GPW KW G umber of auto switches il S n uto switch pcs. 1 pc. n pcs. Without auto switch il (uilt-in magnet) For the applicable auto switch model, refer to the table below. uto switch model ead wire length (m) pplicable bore size. one Pre-wire to, (il) () (Z) () connector pplicable load IC circuit IC circuit IC circuit Relay, PC HF GF IC circuit Solid state switches marked with are produced upon receipt of order. Relay, PC CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6--

36 Series CG1 Specifications ore size ction Type Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and fluid temperature Piston speed Stroke length tolerance Thread tolerance Cushion Mounting ock Specifications Double acting, Single rod on-lube ir 1. MPa 1. MPa.1 MPa Without auto switch: 1 to C (o freezing) With auto switch: 1 to 6 C (o freezing) to mm/s st +1.4 st +1. Up to mm, Up to mm JIS Class Rubber bumper, ir cushion Up to Up to 1 asic style, xial foot style, Rod side flange style Head side flange style, Rod side trunnion style Head side trunnion style, Clevis style (Used for changing the port location by.). MPa except locking parts. Rod/Head side trunnion styles are not available for bore sizes ø and ø. Trunnion is not attached for a cover on which lock mechanism is equipped. to mm/s st +1.4 st +1. mm mm Symbol Made to Order Specifications (For details, refer to page 6--1.) Specifications Change of rod end shape ock position Holding force (Max.) () acklash Manual release ø Standard Stroke ore size, ø Minimum Stroke for uto Switch Mounting Head end, Rod end, Double end ø Standard stroke (1) ø 6,,,,, 1,,,,,, 1,,, ø 1 mm or less on-lock type, ock type ø ong stroke to 1 to 1 to 4 1 to 1 to 1 to 1 1 to 1 Rod oot Material ø 4 ø djust the switch position so that it operates upon movement to both the stroke end and backlash ( mm) positions. Maximum manufacturable stroke 1 ote 1) Intermediate strokes other than the above are produced upon receipt of order. Spacers are not used for intermediate strokes. ote ) ong stroke applies to the axial foot style and the rod side flange style. If other mounting brackets are used, or the length exceeds the long stroke limit, the stroke should be determined based on the stroke selection table in the technical data. Model C/C /6 H G/K W HF o. of auto switches mounted 1 1 mm 1 mm mm 1 mm mm 1 mm Symbol Rod boot material Maximum operating temperature J K ylon tarpaulin Heat resistant tarpaulin C C Maximum ambient temperature for the rod boot itself. 6--6

37 ir Cylinder: With End ock Series CG1 Precautions e sure to read before handling. For Safety Instructions and ctuator Precautions, refer to pages 6- to 6-6. Use the Recommended Pneumatic Circuit This is necessary for proper operation and release of the lock. Head end lock Operating Precautions Rod end lock 1. Do not use position solenoid valves. void use in combination with position solenoid valves (especially closed center metal seal types). If pressure is trapped in the port on the lock mechanism side, the cylinder cannot be locked. Furthermore, even after being locked, the lock may be released after some time, due to air leaking from the solenoid valve and entering the cylinder.. ack pressure is required when releasing the lock. e sure air is supplied to side of cylinder without the locking mechanism, as above, prior to supplying air pressure to the side with end lock or lock may not be released. ( Refer to Releasing the ock.). Release the lock when mounting or adjusting the cylinder. If mounting or other work is performed when the cylinder is locked, the lock unit may be damaged. 4. Operate with a load ratio of % or less. If the load ratio exceeds %, this may cause problems such as failure of the lock to release, or damage to the lock unit.. Do not operate multiple cylinders in synchronization. void applications in which two or more end lock cylinders are synchronized to move one workpiece, as one of the cylinder locks may not be able to release when required. 6. Use a speed controller with meter-out control. ock cannot be released occasionally by meter-in control.. e sure to operate completely to the cylinder stroke end on the side with the lock. If the cylinder piston does not reach the end of the stroke, locking and unlocking may not be possible.. Do not use an air cylinder as an air-hydro cylinder. This could result in leakage of oil.. Install a rod boot without twisting. If the cylinder is installed with its bellows twisted, it could damage the bellows. 1. djust an auto switch position so that it operates for movement to both the stroke end and backlash ( mm) positions. When a -color indication switch is adjusted for green indication at the stroke end, it may change to red for the backlash return, but this is not abnormal. Warning 1. Do not operate the cushion valve in the fully closed or fully opened state. Using it in the fully closed state will cause the cushion seal to be damaged. Using it in the fully opened state will cause the piston rod assembly or the cover to be damaged.. Operate within the specified cylinder speed. Otherwise, cylinder and seal damage may occur. Warning Operating Precautions Operating Pressure 1. Use pressures over.1 MPa at port with locking mechanism. Exhaust Speed 1. ocking will occur automatically if the pressure applied to the port on the lock mechanism side falls to. MPa or less. In cases where the piping on the lock mechanism side is long and thin, or the speed controller is separated at some distance from the cylinder port, the exhaust speed will be reduced. Take note that some time may be required for the lock to engage. In addition, clogging of a silencer mounted on the solenoid valve exhaust port can produce the same effect. Relation to Cushion 1. When cushion valve at side with locking mechanism is fully opened or closed, piston rod may reached at stroke end. Thus lock is not established. nd when locking is done at cushion valve fully closed, adjust cushion valve since lock may not be released. Releasing the ock 1. efore releasing the lock, be sure to supply air to the side without the lock mechanism, so that there is no load applied to the lock mechanism when it is released. (Refer to the recommended pneumatic circuits.) If the lock is released when the port on the other side is in an exhaust state, and with a load applied to the lock unit, the lock unit may be subjected to an excessive force and be damaged. Furthermore, sudden movement of the piston rod is very dangerous. Disassembly/Replacement 1. Do not replace the bushings or the cushion seals. The bushings and the cushion seals are press-fit. To replace them, they must be replaced together with the cover assembly.. To replace a seal, apply grease to the new seal before installing it. If the cylinder is put into operation without applying grease to the seal, it could cause the seal to wear significantly, leading to premature air leakage.. Those with a bore of ø or more cannot be disassembled. When disassembling cylinders with bore sizes of ø through ø, grip the double flat part of either the head cover or the rod cover with a vise and loosen the other side with a wrench or a monkey wrench, etc., and then remove the cover. When retightening, tighten approximately degrees more than the original position. (Cylinders with ø or larger bore sizes are tightened with a large tightening torque and cannot be disassembled. Please contact SMC when disassembly is required.) 6-- CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C

38 Series CG1 Construction: With Rubber umper Head end lock ø, ø ø, ø Manual release (on-lock type): Suffix Manual release (ock type): Suffix Rod end lock ong stroke Component Parts o. q w e r t y u i Description Rod cover Head cover Tube cover Cylinder tube Piston Piston rod ushing ock piston ock bushing ock spring umper Hexagon socket head cap screw Cap Cap Rubber cap M/O knob M/O bolt M/O spring Stopper ring umper umper Material luminum alloy luminum alloy luminum alloy luminum alloy luminum alloy Carbon steel Oil-impregnated sintered alloy Carbon steel Copper alloy Stainless steel Urethane lloy steel luminum die-casted Carbon steel Synthetic rubber Zinc die-casted lloy steel Steel wire Carbon steel Urethane Urethane Replacement Parts: Seal Kit (With lock at single end) Series ore size Kit no. CG1 Rubber bumper type CG1PS CG-PS CG-PS CG1-PS CG1-PS CG1-PS CG1-PS CG1-PS ote Clear hard anodized Clear hard anodized Clear hard anodized Hard anodized Chromated Hard chrome plated ø and larger are lead-bronze casted Hard chrome plated, Heat treated lack zinc chromated lack painted Oxide film treated lack painted lack zinc chromated, Red painted Zinc chromated Zinc chromated ø or larger: the same as bumper ote) In the case of cylinders with auto switches, magnets are installed in the piston. The material is stainless steel on auto switch equipped styles ø and ø. Order seal kit in accordance with the bore size. Contents Set of and grease @ Description Snap ring Piston gasket Wear ring Rod end nut Rod seal Piston seal Cylinder tube gasket ock piston seal Piston holder Replacement Parts: Seal Kit (With lock at double end) Series ore size Kit no. CG1 Rubber bumper type Material Stainless steel R Resin Rolled steel R R R R Urethane CG1PS-W CG-PS-W CG-PS-W CG1-PS-W CG1-PS-W CG1-PS-W CG1-PS-W CG1-PS-W Order seal kit in accordance with the bore size. ote one for ø, ø ickel plated 1 pc. when using tube cover pcs. for with locks in both sides ø to ø only Contents Set of and grease pack 6--

39 ir Cylinder: With End ock Series CG1 Construction: With ir Cushion With air cushion Head end lock Manual release (on-lock type): Suffix Component Parts o. q w e r t y u i o!!1!!!!4!!6!! 4 Description Rod cover Head cover Tube cover Cylinder tube Piston Piston rod ushing ock piston ock bushing ock spring umper Hexagon socket head cap screw Cap Cap Rubber cap M/O knob M/O bolt M/O spring Stopper ring Rod end lock Material luminum alloy luminum alloy luminum alloy luminum alloy luminum alloy Carbon steel Oil-impregnated sintered alloy Carbon steel Copper alloy Stainless steel Urethane lloy steel luminum die-casted Carbon steel Synthetic rubber Zinc die-casted lloy steel Steel wire Carbon steel Replacement Parts: Seal Kit (With lock at single end) Series ore size Kit no. CG1PS CG-PS CG-PS CG1 CG1-PS Rubber bumper CG1-PS type CG1-PS CG1-PS CG1-PS Order seal kit in accordance with the bore size. ote Clear hard anodized Clear hard anodized Clear hard anodized Hard anodized Chromated Hard chrome plated ø and larger are lead-bronze casted Hard chrome plated, Heat treated lack zinc chromated lack painted Oxide film treated lack painted lack zinc chromated, Red painted Zinc chromated Zinc chromated ote) In the case of cylinders with auto switches, magnets are installed in the piston. The material is stainless steel on auto switch equipped styles ø and ø. Contents Set of $ and grease # #1 # # #4 # #6 # # # $ $1 Description Piston gasket Wear ring Rod end nut Rod seal Piston seal Cylinder tube gasket ock piston seal Piston holder Cushion ring Cushion ring Seal retainer Cushion valve Valve retainer ock nut Cushion seal Cushion seal Cushion ring gasket Cushion ring gasket Valve seal Valve retaining gasket Material R Resin Rolled steel R R R R Urethane rass rass Rolled steel Rolled steel Rolled steel Rolled steel Urethane Urethane R R R R Replacement Parts: Seal Kit (With lock at double end) Series ore size Kit no. CG1PS-W CG-PS-W CG1 Rubber bumper type CG-PS-W CG1-PS-W CG1-PS-W CG1-PS-W CG1-PS-W CG1-PS-W Order seal kit in accordance with the bore size. ong stroke ote ickel plated 1 pc. when using tube cover pcs. for with locks in both sides ø to ø only Only when using nickel plated, tube cover Electroless nickel plated Electroless nickel plated ickel plated ø or larger: The same as ø or larger: The same as Contents Set of $ and grease pack CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6--

40 Series CG1 Rubber umper Type: CG1 Head end lock: CG1 ore size Stroke H MM H G -Rc P G Width across flats 1 -TC øe. øi øe ød øtd TE K F T -TC D TG TF H S + Stroke F T cross section Manual release (on-lock type): Suffix HR Manual release (ock type): Suffix H W ørf W ømo. K C ±.1 -J ore size Stroke range Up to Up to Up to 4 Up to Up to Up to Up to 1 Up to C. 6 6 D 1 D E 1 F G 1 G 1 H 1 1 H HR H (Max.) I J M4 x. depth M x. depth. M x. depth M6 x 1 depth M x 1. depth M1 x 1. depth M1 x 1. depth M x 1. depth ore size K K MM MO P RF S T TC TDH TE TF TG W M x 1. M1 x 1. M1 x 1. M x 1. M1 x 1. M1 x 1. M x 1. M6 x / 1/ 1/ 1/ 1/4 1/4 / 1/ M x. M6 x. M x 1. M1 x 1. M x 1. M x

41 ir Cylinder: With End ock Series CG1 Rubber umper Type: CG1 Rod end lock: CG1 ore size Stroke R G D1 S + Stroke T ore size D1.... G 1() 1() 1() 1(1) () () () () S () () 1() (6) (1) (1) 4(1) 4(1) T 1() 1() (1) (1) ( ): Denotes the dimensions for long stroke. 1() (1) () () (4) (4) () () CJ1 CJP CJ CM CG1 Double end lock: CG1 ore size Stroke W M M1 S + Stroke ore size S C CS1 C6 C C CP With rod boot CM C øij øe JH l f JW h + l + l + Stroke ore size e f ( ): Denotes the dimensions for long strokes. The minimum stroke with rod boot is mm. h 6 6 IJ 4 JH (.) (.) (.) (.) (.) (.) (.) () () JW (1) (1) (1) l. stroke Head end lock (-H) Rod end lock (-R) () 4() (1) () 1(4) 1(4) () () Double end lock (-W)

42 Series CG1 ir Cushion Type: CG1 Head end lock: CG1 ore size Stroke H Rod end lock: CG1 ore size Stroke R W W 1 Wθ -P Max. WH Head End ock: -H ore size P M x. M x. Rc 1/ Rc 1/ Rc 1/4 Rc 1/4 Rc / W 1 1 W Rc 1/ 1 For dimensions other than listed above, refer to the dimensions with rubber bumper. Rod End ock: -R ore size P M x. M x. Rc 1/ Rc 1/ Rc 1/4 Rc 1/4 Rc / Rc 1/ W W 1() 1() 1() 1() (1) (1) WH WH ( ): Denotes the dimensions for long strokes. For dimensions other than the listed above, refer to the dimensions with rubber bumper. Wθ Wθ 6--6

43 ir Cylinder: With End ock Series CG1 With Mounting racket (For dimensions other than listed below, refer to pages 6--6 to 6, and 1.) xial foot style: CG1 Rod side flange style: CG1F Foot Style S + Stroke Head end lock: -H ore size S 6 Without rod boot With rod boot + l. + l. + l + l 4. + l 4. + l. + l + l ( ): Denotes the dimensions for long stroke. ore size Without rod boot Head end lock: -H ( ): Denotes the dimensions for long stroke. With rod boot S 6(64) 6(64) () 6(6) 6() 6() 6() 6() Rod Side Flange Style Overall length is the same as basic style. Head Side Flange Style 4 + l + l + l + l 6 + l 6 + l 4 + l + l Head side flange style: CG1G Rod end lock: -R Without rod boot With rod boot 1() 1() + l 6.(.).(.) + l.(1.).(.) + l 4(1) 4() + l.(.).(.) + l.(.).(.) + l 4.(.).(.) + l () () + l Without rod boot 1 () 1(1) 1(1) () (6) Rod end lock/-r (Head side flange) With rod boot + l + l + l (6) + l 1() + l 1() + l () + l () + l S Double end lock: -W Without rod boot With rod boot Without rod boot Double end lock/-w 1 + l. + l. + l + l 6. + l 6. + l. + l + l With rod boot 1 + l 1 + l + l + l + l + l + l 4 + l CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C Rod side trunnion style: CG1U (Rod end lock-h only) Head side trunnion style: CG1T (Rod end lock -R only) Rod Side Trunnion Style Overall length is the same as basic style. Head Side Trunnion Style ore size Rod end lock/-r Z (Head side trunnion) (Head side trunnion) Without rod boot 1 () () () With rod boot 4 + l + l 1 + l () + l () + l () + l Without rod boot 1 1 1() 1(1) 1(6) With rod boot + l + l + l (1) + l (1) + l () + l ( ): Denotes the dimensions for long stroke. Z + Stroke 6--

44 Series CG1 With Mounting racket Clevis style: CG1D ø to ø Clevis style: CG1D ø to ø Z + Stroke Z + Stroke Clevis Style ore size Z Without rod boot Head end lock: -H With rod boot Without rod boot With rod boot 1 + l + l 1 + l 14 + l + l + l 4 + l + l l 1 + l 1 + l + l 4 + l + l. + l. + l Z Without rod boot 1 () 1() () (44) () Rod end lock: -R With rod boot + l 1 + l 1 + l (1) + l () + l () + l () + l 4(61) + l Without rod boot 1 1(6) () ().(.).(.) With rod boot + l + l 1 + l () + l (4) + l 4() + l.(.) + l.(.) + l ore size Without rod boot 1 6 Z Double end lock/-w With rod boot 1 + l + l + l + l + l + l 61 + l 6 + l ( ): Denotes the dimensions for long stroke. Without rod boot With rod boot 1 + l 1 + l + l + l l l l l Other than the applicable auto switches listed in How to Order, the following auto switches can be mounted. For detailed specifications, refer to page Type Model Electrical entry Features Reed switch Solid state switch C CC 64 GT Connector Without indicator light Without indicator light With timer pplicable bore size to to With pre-wire connector is available for GT type, too. Refer to page 6-- for details. Wide range detection type, solid state auto switch (G type) is also available. For details, refer to page

45 ir Cylinder: With End ock Series M ø, ø, ø, ø, ø, ø How to Order Without auto switch With auto switch F G C D T uilt-in magnet Mounting asic/without bracket xial foot Rod side flange Head side flange Single clevis Double clevis Center trunnion Port thread type Symbol Type il T TF Rc PT G M MD ore size mm mm mm mm mm mm Stroke Refer to Standard Stroke on page H H YW Manual release on-locking ocking ocking position H R W ocking at head end ocking at rod end ocking at both ends Rod boot il Rod boot J K umber of auto switches il S n 1 n uto switch il Without auto switch For applicable auto switches, refer to tha table below. The auto switches for Z/Z/ Y/Y6/Y are included but unmounted. (Only the switch mounting brackets for the above models are mounted.) one ylon tarpaulin Heat resistant tarpaulin pplicable uto Switch/Refer to page 6--1 for further information on auto switches. Type Reed switch Solid state switch Special function Diagnostic indication (-color indication) Diagnostic indication (-color indication) Water resistant (-color indication) Diagnostic output (-color indication) Magnetic field resistant Electrical entry Terminal conduit DI terminal Terminal conduit Indicator Yes Yes Wiring (Output) -wire (Equiv. to P) -wire -wire (P) -wire (PP) -wire -wire (P) -wire -wire (P) -wire (PP) -wire 4-wire (P) -wire ead wire length symbols:. m il (Example) 4 m (Example) 4 m Z (Example) 4Z 4 V oad voltage DC esides the above models, there are some other auto switches that are applicable. For detailed information, please refer to page V C V V, V V V V, V V, V 4 V V, V V, V V V, V V V, V 4 V uto switch model Tie-rod mounting Z6 Z 4 W Y YP J1 Y YW YPW YW Y FF PDW and mounting 4 44 G K ead wire length (m) Pre-wire. connector (il) () (Z) pplicable load IC circuit IC circuit IC circuit IC circuit IC circuit Relay PC PC Relay PC Relay PC Solid state switches marked with a are produced upon receipt of order. 6-6-

46 ir Cylinder: With End ock Series M Made to Order Specifications (For details, refer to 6-6-.) Symbol Specifications Change of rod end shape Tie rod, cushion valve, tie rod nut, etc. C made of stainless steel C1 Dual stroke cylinder/double rod C Change of trunnion bracket mounting position Double clevis pin and double knuckle C pin made of stainless steel C Double knuckle joint with spring pin C Front trunnion Specifications ore size ction Fluid Proof pressure Max. operating pressure Min. operating pressure ubrication Operating piston speed llowable stroke tolerance Cushion Thread tolerance Port size (Rc, PT, G) Mounting. MPa except locking parts. ocking Specifications ccessory Standard Option mbient and fluid temperature ocking position Holding force (Max.) ack lash Manual release Mounting Rod end nut Clevis pin ocking release bolt ( type only) Single knuckle joint Double knuckle joint (with pin) Rod boot Standard Stroke ore Double acting, Single rod ir 1. MPa 1. MPa.1 MPa Without auto switch: 1 to C (o freezing) With auto switch: 1 to 6 C (o freezing) ot required (on-lube) to mm/s up to :, to :, 1 to 1: oth ends (ir cushion) JIS Class 1/ 1/4 1/4 / / 1/ asic asic, Foot, Rod side flange, Head side flange, Single clevis, Double clevis, Center trunnion Head end, rod end, both ends ø ø ø ø ø ø Foot 1. mm or less on-locking type, locking type Rod side flange Standard stroke Head side flange Single clevis Double clevis Center trunnion,,,,, 1,,,,,,, 4,,,,,, 1,,,,,,, 4,,,,,, 1,,,,,,, 4,, 6,,,,, 1,,,,,,, 4,, 6,,,,, 1,,,,,,, 4,, 6,,,,,,, 1,,,,,,, 4,, 6,, Intermediate strokes are available. (o spacer is used.) CJ1 CJP CJ CM CG1 M M1 C CS1 C6 C C CP CM C 6-6-

Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil.

Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil. Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 4-4 www.cmafh.com With auto switch F G C D U CM CDM With auto switch (uilt-in magnet) Mounting style asic style

More information

Series MBB ø32, ø40, ø50, ø63, ø80, ø100

Series MBB ø32, ø40, ø50, ø63, ø80, ø100 Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA

How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) - www.cmafh.com CDG1 With auto switch (uilt-in magnet) Mounting style asic style L xial foot style F Rod side

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V

Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V Compact Cylinder: Standard Type Double cting, Single Rod,,,,,,,,, How to Order Without auto switch D With auto switch CDQ2 D JW S uilt-in magnet Mounting style Through-hole (Standard) oth ends tapped style

More information

Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm

Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot

More information

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting. Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common

More information

Round Type Hydraulic Cylinder

Round Type Hydraulic Cylinder Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L

More information

Series RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Series RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly

More information

Round Type Hydraulic Cylinder

Round Type Hydraulic Cylinder Round Type ydraulic Cylinder CM Series CQ CK C CM CS C C D- CM Series ominal pressure: 3. MPa ore size :,,, 3 3. MPa Round Type ydraulic Cylinder CM Series ø, ø, ø, ø pplicable uto Switches/Refer to pages

More information

Magnetically Coupled Rodless Cylinder Slider Type: Ball Bushing Bearing. How to Order CY1L 25 H 300 J79W. Load voltage 5 V 200V 100 V 12 V 5 V, 12 V

Magnetically Coupled Rodless Cylinder Slider Type: Ball Bushing Bearing. How to Order CY1L 25 H 300 J79W. Load voltage 5 V 200V 100 V 12 V 5 V, 12 V Magnetically Coupled Rodless Cylinder Slider Type: all ushing earing Series CY1L ø, ø, ø, ø, ø, ø, ø How to Order CY1L H 00 J79W Slider type (all bushing bearing) mm mm mm mm mm mm mm Magnetic holding

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)

Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm) ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore

More information

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional

More information

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125 ir Cylinder M Series ø3, ø40, ø50, ø63, ø80, ø00, ø5 RoHS 0% lighter CJ (ø40-00 stroke) Weight M Series 0.9 kg CJP CJ JCM CM Current model CM3 CG.0 kg CG3 JM Reduced weight by changing the shape of the

More information

Elliptical design for space-savings

Elliptical design for space-savings Plate Cylinder Series,,,, By adopting an elliptical piston design, a slim, square shaped body has been achieved, resulting in a space-saving cylinder with unrestricted mounting directions. Elliptical design

More information

Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.

Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series

More information

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto

More information

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder

Sine Cylinder. Series REC. ø20, ø25, ø32, ø40 REA REB REC C Y C X MQ RHC RZQ. Sine cylinder. Individual. Velocity curve. Speed. Conventional cylinder Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. Velocity curve RE RE Speed Time Sine cylinder Conventional cylinder 3 Sine Cylinder Series,,, llows rapid

More information

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size Air Cylinder: tandard eries CG1W,,,,,,, 0 How to Order auto switch auto switch CG1W L N 0 With auto switch CDG1W L N 0 HW N A uilt-in magnet Double acting, double rod type L U Mounting style asic style

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder Series CJ2 ø, ø, ø CJ1 CJP Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. Series

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series CQS ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility

More information

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm) Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder

More information

Compact Cylinder/Plate type

Compact Cylinder/Plate type Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series

More information

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type. ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 10 % lighter RoS (ø 40-100 stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type. 0.91 kg Reduced weight by changing the shape

More information

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8 Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole

More information

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)

More information

Compact Cylinder With Solenoid Valve

Compact Cylinder With Solenoid Valve Compact Cylinder With Solenoid Valve Series ø, ø, ø, ø Valve and compact cylinder integrated for compactness Solenoid valve abor saving No need to select size of valve ess piping work Compact cylinder

More information

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125

CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125 M..3 : PM Page i CT.ES-8 F ir Cylinder ø newly introduced Series M ø,ø,ø,ø,ø,ø,ø Series M, MW, MK, Double acting single rod Double acting double rod Double acting non-rotating rod ø newly introduced (Double

More information

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover. Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.

More information

Sine Cylinder. REC Series. ø20, ø25, ø32, ø40. Allows high speed transfer of work with dramatically reduced shock/impact. REA REB REC Smooth

Sine Cylinder. REC Series. ø20, ø25, ø32, ø40. Allows high speed transfer of work with dramatically reduced shock/impact. REA REB REC Smooth Sine Cylinder Series,,, llows high speed transfer of work with dramatically reduced shock/impact. RE RE RC Velocity curve Time Sine cylinder Current cylinder Sine Cylinder Series,,, llows rapid transfer

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

Compact Hydraulic Cylinder

Compact Hydraulic Cylinder ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch

More information

Mini Free Mount Cylinder

Mini Free Mount Cylinder Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

More information

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the

More information

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT. ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.

More information

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718.

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718. Courtesy of CM/lodyne/ydradyne Motion Control ydraulic Pneumatic lectrical Mechanical () - www.cmafh.com With auto switch With auto switch (uilt-in magnet) G C CM CM uilt-in Magnet Cylinder Model If a

More information

Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet

Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet L F Mounting style asic style xial foot style Rod side flange style With auto switch CVJ L CDVJ L 6 6 How to Order pplicable uto Switches/Refer to pages to for further information on auto switches. Type

More information

Air Cylinder Series CG1

Air Cylinder Series CG1 ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison

More information

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø 20, ø 25, ø 32, ø 40, ø 50, ø 63, ø 80, ø 100 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

Series C95 ø32, ø40, ø50, ø63, ø80, ø100

Series C95 ø32, ø40, ø50, ø63, ø80, ø100 ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless

More information

Rotary Clamp Cylinder

Rotary Clamp Cylinder Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable

More information

Rotary Clamp Cylinder

Rotary Clamp Cylinder Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable

More information

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A ø, ø, ø L F D Without auto switch With auto switch style asic style Axial foot style Rod side flange style Double clevis style (Except ø) ore size mm mm mm How to Order Standard stroke (mm) ø,,, ø,,,,

More information

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected.

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected. ir Cylinder Series ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS emale rod end available as standard Rod end types suitable for the application can be selected. emale thread Easy fine adjustment of auto

More information

Small Bore Hydraulic Cylinder

Small Bore Hydraulic Cylinder Small ore ydraulic Cylinder CN Series CQ CK CN CM CS C C D- CN Series Nominal pressure: MPa ore size :,,, Stainless Steel Tube Small ore ydraulic Cylinder for MPa CN Series ø, ø, ø, ø Equipped with cushion

More information

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy

More information

Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3)

Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3) Slide Unit Series CX/M/L Slide Bearing/CX:ø, ø, ø5 M:ø, ø6, ø0, ø5, ø3 Ball Bushing Bearing/L:ø, ø6, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy

More information

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series

More information

Sine Rodless Cylinder Series RE asic Type/ø, ø, ø, ø, ø3 asic type Sine rodless cylinder (basic type) Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and

More information

Series CLQ. Compact Cylinder with Lock. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Series CLQ. Compact Cylinder with Lock. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 CT.ES-1 Compact Cylinder with ock Series CQ ø, ø, ø, ø, ø, ø, ø, ø Drop prevention for press fitting jig, etc. Extension locking Maintains cylinder position when supply pressure falls or residual pressure

More information

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod. eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-

More information

16% lighter Existing model

16% lighter Existing model ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter Existing model New Series.0 kg.69 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set

More information

Toggle Type Air Gripper

Toggle Type Air Gripper ø2, ø40, ø50, ø6 Ideal for gripping heavy workpiece Toggle mechanism is adopted. Holds workpiece even when pressure drops. The toggle mechanism that activates when the finger closes realizes strong and

More information

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32 Slide Unit CX/M/L Series Slide Bearing/CX:ø0, ø, ø5 M:ø0, ø, ø0, ø5, ø3 Ball Bushing Bearing/L:ø0, ø, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy

More information

Square Tube Type Air Cylinder

Square Tube Type Air Cylinder Standard: Double cting Single Rod Series C6 Square Tube Type ir Cylinder Series 1 ø, ø, ø, ø, ø, ø Single rod type Series 1 Double rod type Series 1W Non-rotating rod type Series 1K CJ1 CJP CJ2 CM2 C8

More information

High Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector

High Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector Non-rotating Type High Precision Scale Cylinder Series CEP1 ø12, ø How to Order CEP1 12 0 F9N L F High precision scale cylinder Mounting bracket Direct mounting front tapped type Foot type Front flange

More information

Compact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting

Compact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both

More information

Compact Cylinder with Lock

Compact Cylinder with Lock ompact ylinder with ock Series Q ø, ø, ø, ø, ø, ø, ø, ø J2 2 1 1 N N N NS S Q RQ U P 1 rop prevention when the pressure of air source is decreased or the residual pressure is released. rop prevention for

More information

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention

Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper

More information

Air Cylinder Series CG1

Air Cylinder Series CG1 ir Cylinder Series CG,,,,,,, Series Variations CJ Series Standard Series CG Substantially shorter length: to to mm (in comparison with Series CM) to to mm (in comparison with Series C), 9 to mm (in comparison

More information

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55 55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard

More information

Series NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore

Series NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16, 9/16, 3/4, 7/8, 1-1/16, 1-1/4, 1-1/2, 2 Bore CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod

More information

Hygienic Design Cylinder

Hygienic Design Cylinder CT.EUS- -UK Hygienic Design Cylinder New Round type Series HY has been added. water resistant cylinder configured for easy cleaning ISO standard type Series HYC asic type Series HYQ With guide Series HYG

More information

Clamp Cylinder with Lock

Clamp Cylinder with Lock Clamp Cylinder with ock CK Series aintains a clamped or unclamped state when air supply pressure drops or residual pressure is released. Total length reduced by mm ody is shortened while maintaining the

More information

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added. ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side

More information

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

More information

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection ir Cylinder eries ø, ø, ø Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. eries Variations tandard

More information

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing

More information

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism)

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism) Non-rotating Double Power Cylinder Series Double Power Cylinder Series R (without non-rotating mechanism) 2 Non-rotating Double Power Cylinder Double extension output power!! Our unique construction doubles

More information

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover.

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter New Series Existing model.69 kg.0 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set

More information

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Compact Slide. Series MXH ø6, ø10, ø16, ø20 Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle

More information

Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return

Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation

More information

Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods

Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 46-54 www.cmafh.com Guide Cylinder Series MGG ø, ø, ø, ø, ø, ø, ø, ø Integration of a basic cylinder and guide

More information

Series MGC ø20, ø25, ø32, ø40, ø50

Series MGC ø20, ø25, ø32, ø40, ø50 Compact Guide Cylinder Series MGC ø, ø, ø, ø, ø Linear Transfer Unit with compact guide body and front plate Grease nipple offers easy lubrication for bearings Compact front plate and guide body Space

More information

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø20, ø25, ø32, ø40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of auto

More information

SeriesMHZL2 How to Order

SeriesMHZL2 How to Order Parallel Type ir Gripper Long Stroke SeriesMHZL2 How to Order 1 2 2 ore size Number of fingers 2 2 fingers 1mm mm 2mm 2mm MHZL2 D S C ction Double acting Single acting (normally open) Single acting (normally

More information

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover

More information

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual

High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity

More information

Series MGP. Compact Guide Cylinder. New end lock type introduced to Series MGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Series MGP. Compact Guide Cylinder. New end lock type introduced to Series MGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series.22- CL MLG CN CNG MNB CNS CLS CB CV/MVG CXW CXS CXT MX MXU MXH MXS MXQ MXF MXW MXP MG MGQ MGG MGC MGF

More information

Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact.

Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø, ø, ø1, ø, ø, ø With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Series Variations

More information

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) MGJ -Z W MGQ MGG MGC MGF MGT 23 D- -X Non-rotating Double Power Cylinder Double extension output

More information

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) 23 MGJ -Z W MGQ MGG MGC MGF MGT D- -X Tube rod diameter External dimension Non-rotating Double

More information

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover.

15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover. ir ylinder ø, ø, ø, ø, ø Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø- stroke) % lighter 1.31kg ew 1.54 kg Existing model Easy air cushion control

More information

CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating

More information

Compact Cylinder Remodeled with a new body to get more flexibility! Can mount small auto switches on 4 surfaces.

Compact Cylinder Remodeled with a new body to get more flexibility! Can mount small auto switches on 4 surfaces. Compact Cylinder Remodeled with a new body to get more flexibility! Can mount small auto switches on 4 surfaces. New uto switches can be mounted on any of the 4 surfaces, depending on the installation

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

CAT.DKI A. SMC guide to ATEX compliant products

CAT.DKI A. SMC guide to ATEX compliant products CT.DKI-08- SMC guide to TEX compliant products SMC - provide products compliant to TEX Directive Outline of TEX directive Since st July 00, equipment used in potentially explosive atmospheres within the

More information

Platform Cylinder. CXT Series. ø12, ø16, ø20, ø25, ø32, ø40. A highly rigid and highly accurate slide table integrated with an actuator.

Platform Cylinder. CXT Series. ø12, ø16, ø20, ø25, ø32, ø40. A highly rigid and highly accurate slide table integrated with an actuator. Platform Cylinder Series ø, ø, ø, ø, ø, ø highly rigid and highly accurate slide table integrated with an actuator. Two types of guide rod bearings to accommodate your application For heavy loads all bushing

More information

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected. ir Cylinder ø 20, ø 25, ø 32, ø 40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of

More information

Fine Lock Cylinders/Lock-up Cylinder

Fine Lock Cylinders/Lock-up Cylinder Fine Lock Cylinders/Lock-up Cylinder CL Series,,, 3,,, 3,,,,, CLJ Locking method Features Spring locking Unlocking Discharging the air causes the lock to operate. (Lock-up cylinders are spring locking

More information

Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25

Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25 ISO Cylinder Series C ø, ø0, ø, ø, ø, ø Conforming to ISO and CETOP RPP. Series Variations Standard Series C Series Non-rotating rod Series C ction Double acting Single acting Double acting Rod Single

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle

More information

15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to

15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to Air ylinder A Series ø40, ø50, ø63, ø80, ø100 RoHS Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to (ø50-50 stroke) 15% lighter 1.31kg Easy air cushion control

More information