Aluminum High Vacuum Angle Valve
|
|
- Thomas Franklin
- 6 years ago
- Views:
Transcription
1 luminum High Vacuum ngle Valve X Series The X series has been remodeled. Please select the new type. RoHS High fluorine resistance inimal outgassing inimal contamination from heavy metals ø00, ø60 X(V) X X X Q X XY D- XS XVD XGT YV 43
2 ightweight, ompact arge conductance, small body Excellent resistance against fluorine corrosion (body) luminum High Vacuum ngle Valve X Series ow outgassing ow outgassing makes it possible to use a lower capacity pump and also to shorten evaluation time. X Series ase odel (mm) X-6 X X- 65 X X X X X ommon to all series. (mm) Weight (kg) Uniform baking temperature Excellent thermal conductivity results in a uniform temperature for the entire valve body and a marked decrease in the condensation of gases inside the valve. omparison with F25 flange e ody r ody 2 t ody 3 onductance (/s) ittle heavy metal contamination The valve does not contain heavy metals such as Ni (nickel) or r (chrome) and a low sputtering yield also helps to minimize heavy metal contamination of semiconductor wafers. Temperature distribution of 20 specifications Temperature ( ) e, r, t q, w w ellows q Valve Heater Time (minutes) High Vacuum ngle Valves X Series Features X/XV (ellows seal, Single acting) Particulate-free and clean room compatible bellows type Pressure-balance mechanism X/XV (ellows seal, Double acting) Particulate-free and clean room compatible bellows type Pressure-balance mechanism XF/XFV ( seal, Single acting) High speed response Particulates are reduced through special surface treatment of shaft seal. XG/XGV ( seal, Double acting) High speed response Particulates are reduced through special surface treatment of shaft seal. 44 XD/XDV (2-Step control, Single acting) Initial stage exhaust valve and main exhaust valve are combined. (flow rate 2-step control valve) Designed with a compact system and reduced piping Prevents particulate turbulence inside the chamber during exhaustion. Prevents pumps from running while overloaded. Initial exhaust valve flow is adjustable. XH (ellows seal, anual) ellows type is particulate free and cleaned. Pressure balance mechanism allows unrestricted exhaust direction. ow actuation torque (0.5 N m or less) Spring provides standard sealing load. Handle height is the same when valve is open or closed. Indicator to confirm opening and closing of valve is standard equipment. XS (ellows pressure balance, Normally closed XS electromagnetic) Particulates are reduced because there are no sliding metal parts. Pressure balance mechanism allows unrestricted exhaust direction. control power supply circuit for solenoid valve drive has been made standard. an be used in portable equipment since air for drive is not necessary.
3 High Vacuum ngle Valves ctuation pplication Shaft seal system odel X Valve type Series Variations Operating pressure (Pa) (abs) The X products with mark have been remodeled. Please select the new type. eakage (Pa m 3 /s) Flange size Option High Note) Note) Internal External Switch Heater Indicator temperature spec. Page (Size 6: None) Single acting XV (With solenoid (N..) valves) P.46 to P.49 Particle free cleaned ellows seal X 0-6 to atmospheric pressure Double XV (With solenoid acting valves) (Size 6: None) P.420 to P.424 XF Electromagnetic anual ir operated High speed operation High volume operation Prevents turbulence of particulates. Prevents a pump from running overloaded. Particle free cleaned For portable equipment not requiring air seal ellows seal seal ellows seal (ellows balance) Single acting XFV (With solenoid (N..) valves) XG Double XGV (With solenoid acting valves) XD XDV (With solenoid valves) XH XS Single acting (N..) 0-5 to atmospheric pressure 0-6 to atmospheric pressure 0-6 to anual atmospheric pressure Single 0 acting -6 to 0. Pa (G) (N..) (Size 6: None) (Size 6: None) Standard Standard Standard Standard (Size 6: None) P.426 to P.435 P.436 to P.447 P.448 to P.453 P.454 P.455 P.456 to P.458 X X X Q X XY D- XS XVD XGT YV Note) In case of standard seal material (F) Heater and high temperature specifications are not available with switches. 45
4 luminum High Vacuum ngle Valve Normally losed/ellows Seal X/XV Series RoHS How to Order The X-6 to 80 have been remodeled. Please select the new type. X 6 9N q w e r t y u X q Flange size Size w Flange type Type F (NW) D (DN) r Temperature specifications/heater High H0 temperature H4 type H5 pplicable flange 6, 25,, 50, 63, 80 63, 80, 00, 60 y Number of auto switches/ounting position Temperature 5 to 60 5 to 50 Note) Size 6 is not applicable for H4, H5, Size 25 not for H4. Quantity Without auto switch 2 pcs. pc. pc. Heater With 00 heater With 20 heater ounting position Valve open/closed Valve open Valve closed u ody surface treatment/seal material and its changed part ody surface treatment Seal material N P Q R S T U Surface treatment External: Hard anodized Internal: Raw material External: Hard anodized Internal: Oxalic acid anodized Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. ompound No W 79 SS592 SS630 SSE U46 arrel Perfluoro is a registered trademark of atsumura Oil o., td. alrez is a registered trademark of E. I. du Pont de Nemours and ompany or its affiliates. hemraz is a registered trademark of Greene, Tweed & o. UTI ROR is a registered trademark of Nippon Valqua Industries, td. b 46 e Indicator/Pilot port direction Indicator Pilot port direction F G J Without indicator With indicator Flange side Flange side eft flange surface eft flange surface Without indicator t uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// eft flange surface Flange side Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch (Not applicable to flange size 6) Without auto switch (with built-in magnet) Note ) uto switches shown above cannot be mounted on the high temperature type. For the high temperature type, a semi-standard product that uses the heat resistant auto switch D-F7NJ is available. For details, please contact S. Note 2) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N Seal material changed part and leakage Note 2) hanged eakage (Pa m 3 /s or less) Note ) part Internal External None w, e w e.3 x 0-0 (F).3 x x x 0-0 (F).3 x 0 - (F).3 x x 0 - (F).3 x 0-9 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 48 for changed part. Number indicates parts number of onstruction accordingly. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) X-6-9N-XN
5 ir Operated/with Solenoid Valve luminum High Vacuum ngle Valve X/XV Series XV How to Order 6 G 9N G q w e r t y u i o!0 [Option] XV q Flange size Size w Flange type Type F (NW) D (DN) r uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// ir operated/with solenoid valve pplicable flange 6, 25,, 50, 63, 80 63, 80, 00, 60 Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch (Not applicable to flange size 6) Without auto switch (with built-in magnet) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N y Rated voltage E-compliant 00 V, 50/60 Hz V, 50/60 Hz V, 50/60 Hz 220 V, 50/60 Hz 5 24 VD 6 2 VD Seal material N P Q R S T U Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. u Electrical entry G Grommet (ead wire length 300 mm) H Grommet (ead wire length 600 mm) type plug connector type plug connector ompound No W 79 SS592 SS630 SSE U46 e Indicator/Pilot port direction Indicator Pilot port direction F eft flange surface With G indicator J eft flange surface Without indicator type plug connector ( power supply) not attached for J, of sizes 6 and 25. i ight/surge voltage suppressor None S With surge voltage suppressor Z With light/surge voltage suppressor With light/surge voltage suppressor U (Non-polar type) S type: Not available for. U type: D only. o ody surface treatment/seal material and its changed part ody surface treatment Seal material changed part and leakage Surface treatment Note 2) eakage (Pa m 3 /s or less) External: Hard anodized Internal: Raw material hanged part Internal External: Hard anodized Internal: Oxalic acid anodized None.3 x 0-0 (F) w, e.3 x 0-8 w.3 x 0-8 e.3 x 0-0 (F) t Number of auto switches/ounting position Quantity Without auto switch 2 pcs. pc. pc. ounting position Valve open/closed Valve open Valve closed Note ) External.3 x 0 - (F).3 x x 0 - (F).3 x 0-9 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 48 for changed part. Number indicates parts number of onstruction accordingly. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XV-6-9N-G-XN Note ) Option specifications/ombinations This model has indicator, auto switch and (DN) flange options, but high temperature/heater options are not available. Note 2) Solenoid valves XV-6, 25,, 50: SYJ39, XV-63, 80, 00, 60: SYJ59 Example) SYJ39-GS, etc. For details, consult your S sales representative. For option Q, the solenoid valve should be a E-compliant product. eft flange surface!0 E-compliant Q E-compliant X X X Q X XY D- XS XVD XGT YV 47
6 R P X/XV Series Specifications odel Valve type Fluid Operating X temperature ( ) XV Operating pressure (Pa) (abs) onductance (/s) Note ) Internal eakage (Pa m 3 /s) External Flange type Principal materials Surface treatment Pilot pressure (Pa) (G) X(V)-6 X(V)-25 X(V)- X(V)-50 X(V)-63 X(V)-80 X(V)-00 X(V)-60 Normally closed (Pressurize to open, Spring seal) Inert gas under vacuum 5 to 60 (High temperature type: 5 to 50) 5 to 50 x 0-6 to atmospheric pressure In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation In case of standard material F:.3 x 0 - at normal temperature, excluding gas permeation F (NW) F (NW), (DN) ody: luminum alloy, ellows: Stainless steel 36, ain part: Stainless steel, F (Standard seal material) External: Hard anodized X 5 Pilot port size XV 5: Port (P), Port 3(R) X Weight (kg) XV Note ) onductance is the value for an elbow with the same dimensions. Note 2) For valve heater specifications, refer to ommon Option [] Heater on page 459. Internal: Raw material 0.4 to 0.7 Rc/8 Rc/4 Rc/8: Port (P), 5: Port 3(R) onstruction/operation uto switch (Option) Port (P) (Pressure port) Port 3(R) (Exhaust port) Indicator (Option) Heater (Option) q onnet assembly (aintenance parts) (Including w, t, y, u) agnet (Option) Pilot port Solenoid valve u ellows holder (aterial: Stainless steel 304) e Exterior seal (aintenance part) y ellows (aterial: Stainless steel 36) t Valve (aterial: Stainless steel 304) With solenoid valve ellows side exhaust w Valve seal (aintenance part) r ody (aterial: 6063) Valve side exhaust Refer to the back of page 465 for aintenance Parts. <Working principle> y applying the pilot pressure from the pilot port, the piston-coupled valve overcomes the spring force or operating force by pressure, and the valve opens. For the XV, the pilot pressure is always applied to the port (P), and the valve opens when the solenoid valve is turned ON and closes when it is turned OFF. 48 <Options> uto switch: Heater: Indicator: The magnet activates the auto switch. With 2 auto switches, the open and closed positions are detected, and with auto switch, either the open or closed position is detected. uto switches are applicable at ordinary temperatures only (5 to 60 ). Simple heating is performed using thermistors. The valve body can be heated to approximately 00 or 20, depending on the heater option and the valve size. The type and number of thermistors to be used will vary depending upon size and setting temperature. In the case of high temperature specifications, the bonnet assembly is a heat resistant structure. This does not apply in cases where a solenoid valve is attached. When the valve is open, an orange marker appears in the center of the name plate.
7 luminum High Vacuum ngle Valve X/XV Series Dimensions X/ir operated E (b) D (a) E øfn (F flange) øfd ( flange) E (c) Heater (Option) uto switch (Option) H øg XV/With solenoid valve (mm) odel D E Note ) Fn Fd G H X X X X X X X X Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions. oreover, heater mounting positions will differ depending on the type of heater. For further details, refer to mounting positions under Replacement Heaters on page 465. J X X X Q Port P (Pressure port) N Port R (Exhaust port) X XY D- XS XVD XGT YV odel XV-6 XV-25 XV- XV-50 J Other dimensions are the same as the X. For details, consult your S sales representative. (mm) N odel XV-63 XV-80 XV-00 XV-60 J Other dimensions are the same as the X. For details, consult your S sales representative. (mm) N
8 luminum High Vacuum ngle Valve Double cting/ellows Seal RoHS X/XV Series How to Order Flange size 6, 25, X 6 9N Flange size 50, 63, 80, 00, 60 X 50 9N q w e r t y u X6 to q Flange size Size w Flange type Type F (NW) D (DN) pplicable flange 6, 25,, 50, 63, 80 63, 80, 00, 60 e Pilot port direction Pilot port direction Flange side eft flange surface eft flange surface Flange side r Temperature specifications/heater Temperature Heater 5 to 60 High H0 temperature H4 5 to 50 With 00 heater type H5 With 20 heater Note) Size 6 is not applicable for H4, H5, Size 25 not for H4. y Number of auto switches/ounting position Quantity Without auto switch 2 pcs. pc. pc. ounting position Valve open/closed Valve open Valve closed u ody surface treatment/seal material and its changed part ody surface treatment Seal material N P Q R S T U Surface treatment External: Hard anodized Internal: Raw material External: Hard anodized Internal: Oxalic acid anodized Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. ompound No W 79 SS592 SS630 SSE U46 t uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch (Not applicable to flange size 6) Without auto switch (with built-in magnet) Note ) uto switches shown above cannot be mounted on the high temperature type. For the high temperature type, a semi-standard product that uses the heat resistant auto switch D-F7NJ is available. For details, please contact S. Note 2) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N Seal material changed part and leakage Note 2) hanged eakage (Pa m 3 /s or less) Note ) part Internal External None.3 x 0-0 (F).3 x 0 - (F) w, e.3 x x 0-9 w.3 x x 0 - (F) e.3 x 0-0 (F).3 x 0-9 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 422 for changed part. Number indicates parts number of onstruction accordingly. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) X-6-9N-XN 420
9 ir Operated/with Solenoid Valve luminum High Vacuum ngle Valve X/XV Series How to Order [Option] XV q Flange size Size Flage size 6, 25, Flage size 50, 63, 80 XV XV 6 9N G 50 9N q w e r t ir operated/with solenoid valve!0 ody surface treatment/seal material and its changed part ody surface treatment Seal material N P Q R S T U w Flange type Type F (NW) D (DN) r uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// y Rated voltage E-compliant 00 V, 50/60 Hz V, 50/60 Hz V, 50/60 Hz 220 V, 50/60 Hz 5 24 VD 6 2 VD Surface treatment External: Hard anodized Internal: Raw material External: Hard anodized Internal: Oxalic acid anodized Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td.! E-compliant Q E-compliant pplicable flange 6, 25,, 50, 63, 80 63, 80 Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch (Not applicable to flange size 6) Without auto switch (with built-in magnet) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N u Type of actuation 2 position single W 2 position double ompound No W 79 SS592 SS630 SSE U46 e Pilot port direction G y u Solenoid valve direction eft flange surface flange surface type plug connector ( power supply) not attached for of sizes 6 and 25. : Size 6, 25, only. : Size 50, 63, 80 only. i o!0! t Number of auto switches/ounting position Quantity Without auto switch 2 pcs. pc. pc. ounting position Valve open/closed Valve open Valve closed i Electrical entry G Grommet (ead wire length 300 mm) H Grommet (ead wire length 600 mm) type plug connector type plug connector To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XV-6-9N-G-XN o ight/surge voltage suppressor None S With surge voltage suppressor Z With light/surge voltage suppressor With light/surge voltage suppressor U (Non-polar type) S type: Not available for. U type: D only. Seal material changed part and leakage Note 2) eakage (Pa m 3 /s or less) Note ) hanged part Internal External None.3 x 0-0 (F).3 x 0 - (F) w, e.3 x x 0-9 w.3 x x 0 - (F) e.3 x 0-0 (F).3 x 0-9 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 422 for changed part. Number indicates parts number of onstruction accordingly. Note ) Option specifications/ombinations This model has auto switch and (DN) flange options, but high temperature/heater options are not available. Note 2) Solenoid valves 2 position single: XV-6, 25, : SYJ390 XV-50, 63, 80, 00, 60: SY320 2 position double: XV-6, 25, : SYJ3290 XV-50, 63, 80, 00, 60: SY3220 Example) SYJ390-GS, SYJ3290-GS, SY320-GS-4, SY3220-GS-4 For details, consult your S sales representative. For option Q, the solenoid valve should be a E-compliant product. eft flange surface 42 X X X Q X XY D- XS XVD XGT YV
10 R P X/XV Series Specifications odel X(V)-6 X(V)-25 X(V)- X(V)-50 X(V)-63 X(V)-80 X-00 X-60 Valve type Double acting (Dual operation), Pressurize to open/close Fluid Inert gas under vacuum Operating X 5 to 60 (High temperature type: 5 to 50) temperature ( ) XV 5 to 50 Operating pressure (Pa) (abs) x 0-6 to atmospheric pressure onductance (/s) Note ) Internal In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation eakage (Pa m 3 /s) External In case of standard material F:.3 x 0 - at normal temperature, excluding gas permeation Flange type F(NW) F (NW), (DN) Principal materials ody: luminum alloy, ellows: Stainless steel 36, ain part: Stainless steel, F (Standard seal material) Surface treatment External: Hard anodized Internal: Raw material Pilot pressure (Pa) (G) 0.3 to to 0.6 Pilot port size X 5 Rc/8 Rc/4 XV 5: Port (P), Port 3(R), Port 5(R) Weight (kg) X XV Note ) onductance is the value for an elbow with the same dimensions. Note 2) For valve heater specifications, refer to ommon Option [] Heater on page 459. onstruction/operation Port 5(R) (Exhaust port) Plate Port (P) (Pressure port) Port 3(R) (Exhaust port) Solenoid valve Heater (Option) agnet (Option) uto switch (Option) Pilot port (pressurize to close) P-2 q onnet assembly (aintenance parts) (Including w, t, y, u) Pilot port (pressurize to open) P- u ellows holder (aterial: Stainless steel 304) e Exterior seal (aintenance part) y ellows (aterial: Stainless steel 36) t Valve (aterial: Stainless steel 304) With solenoid valve ellows side exhaust w Valve seal (aintenance part) r ody (aterial: 6063) <Working principle> y applying the pilot pressure from the pilot port P-, the piston-coupled valve overcomes the operating force by pressure, and the valve opens. (Pilot port P-2 is open.) onversely, by applying the pilot pressure to the pilot port P-2, the valve closes. (Pilot port P- is open.) For the XV, the pilot pressure is always applied to the port (P), and the valve opens when the solenoid valve is turned ON and closes when it is turned OFF. For the double solenoid, the valve moves to the opposite side from that in which the solenoid valve is turned ON. 422 <Options> uto switch: Heater: Valve side exhaust Refer to the back of page 465 for aintenance Parts. The magnet activates the auto switch. With 2 auto switches, the open and closed positions are detected, and with auto switch, either the open or closed position is detected. uto switches are applicable at ordinary temperatures only (5 to 60 ). Simple heating is performed using thermistors. The valve body can be heated to approximately 00 or 20, depending on the heater option and the valve size. The type and number of thermistors to be used will vary depending upon size and setting temperature. In the case of high temperature specifications, the bonnet assembly is a heat resistant structure. This does not apply in cases where a solenoid valve is attached.
11 luminum High Vacuum ngle Valve X/XV Series Dimensions X6, 25, / ir operated E E (b) D (a) E (c) øfn (F flange) Heater (Option) uto switch (Option) øg H J odel X-6 X-25 X D 2 E Note ) 2 Fn Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions.oreover, heater mounting positions will differ depending on the type of heater.for further details, refer to mounting positions under Replacement Heaters on page 465. G H (mm) J X50, 63, 80, 00, 60/ ir operated E E (b) D (a) odel X-50 X-63 X-80 X-00 X-60 E (c) D øfn (F flange) E Note ) 0.5 Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions.oreover, heater mounting positions will differ depending on the type of heater.for further details, refer to mounting positions under Replacement Heaters on page 465. Fn Fd øfd ( flange) G øg H J H J (mm) X X X Q X XY D- XS XVD XGT YV
12 E E Q P X/XV Series Dimensions XV/With solenoid valve R Port R P N In case of double solenoid valve (Exhaust port) odel XV-6 XV-25 XV N P Other dimensions are the same as the X. Note) For details, consult your S sales representative. Q (mm) R R In case of double solenoid valve Port R (Exhaust port) P N Port P (Pressure port) Q Port P (Pressure port) In case of single solenoid valve In case of single solenoid valve Port R (Exhaust port) (mm) odel XV-50 XV-63 XV N P Q R Other dimensions are the same as the X. Note) For details, consult your S sales representative.
13 I luminum High Vacuum ngle Valve Normally losed/ Seal XF/XFV Series RoHS How to Order ade to Order specifications (For details, refer to pages 430 to 435) XF 6 9N q w e r t y u XF q Flange size Size w Flange type Type F (NW) D (DN) pplicable flange 6, 25,, 50, 63 80, 00, 60 63, 80, 00, 60 e Indicator/Pilot port direction Indicator Pilot port direction F G J Without indicator With indicator Flange side Flange side eft flange surface eft flange surface Without indicator eft flange surface V V E U H V U G H Flange side r Temperature specifications/heater Temperature 5 to 60 High H0 temperature H4 type H5 y Number of auto switches/ounting position 5 to 50 Note) Size 6 is not applicable for H4, H5, Size 25 not for H4. Seal material N P Q R S T U Quantity Without auto switch 2 pcs. pc. pc. Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. Heater With 00 heater With 20 heater ounting position Valve open/closed Valve open Valve closed ompound No W 79 SS592 SS630 SSE U46 t uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch (Not applicable to flange size 6) Without auto switch (with built-in magnet) Note ) uto switches shown above cannot be mounted on the high temperature type. For the high temperature type, a semi-standard product that uses the heat resistant auto switch D-F7NJ is available. For details, please contact S. Note 2) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N u ody surface treatment/seal material and its changed part ody surface treatment Seal material changed part and leakage Surface treatment Note 2) eakage (Pa m External: Hard anodized Internal: Raw material 3 /s or less) External: Hard anodized Internal: Oxalic acid anodized hanged part None w, e w e Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 428 for changed part. Number indicates parts number of onstruction accordingly. Note 3) Part e (exterior seal) is not changeable for sizes 6 and 25. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XF--9N-XN Internal.3 x 0-0 (F).3 x x x 0-0 (F) Note ) External.3 x 0-0 (F).3 x x 0-0 (F).3 x
14 I ir Operated/with Solenoid Valve luminum High Vacuum ngle Valve XF/XFV Series How to Order [Option] XFV 6 G 9N G q w e r t y u i o!0 XFV ir operated/with solenoid valve q Flange size Size w Flange type Type F (NW) D (DN) pplicable flange 6, 25,, 50, 63 80, 00, 60 63, 80, 00, 60 e Indicator/Pilot port direction Indicator Pilot port direction F eft flange surface With G indicator J eft flange surface Without indicator type plug connector ( power supply) not attached for J, of sizes 6 and 25. eft flange surface V V E U H V U G H r uto switch type uto switch model Remarks Without auto switch (without built-in magnet) 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) Solid state auto switch 9()()(Z) D-9()()(Z) 90() 93()()(Z) 9// D-90() D-93()()(Z) Reed auto switch (Not applicable to flange size 6) Without auto switch (with built-in magnet) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N y Rated voltage E-compliant u Electrical entry 00 V, 50/60 Hz V, 50/60 Hz 3 0 V, 50/60 Hz V, 50/60 Hz 5 24 VD 6 2 VD Seal material N P Q R S T U Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR G H Produced by itsubishi able Industries, td. Grommet (ead wire length 300 mm) Grommet (ead wire length 600 mm) type plug connector type plug connector ompound No W 79 SS592 SS630 SSE U46 t Number of auto switches/ounting position Quantity Without auto switch 2 pcs. pc. pc. i ight/surge voltage suppressor None S With surge voltage suppressor Z With light/surge voltage suppressor With light/surge voltage suppressor U (Non-polar type) S type: Not available for. U type: D only. ounting position Valve open/closed Valve open Valve closed o ody surface treatment/seal material and its changed part ody surface treatment Seal material changed part and leakage Surface treatment Note 2) eakage (Pa m 3 /s or less) External: Hard anodized Internal: Raw material hanged part External: Hard anodized Internal: Oxalic acid anodized None w, e w e Internal.3 x 0-0 (F).3 x x x 0-0 (F)!0 E-compliant Q E-compliant Note ) External.3 x 0-0 (F).3 x x 0-0 (F).3 x 0-8 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 428 for changed part. Number indicates parts number of onstruction accordingly. Note 3) Part e (exterior seal) is not changeable for sizes 6 and 25. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XFV--9N-G-XN Note ) Option specifications/ombinations This model has indicator, auto switch and (DN) flange options, but high temperature/heater options are not available. Note 2) Solenoid valves XFV-6, 25, : SYJ39, XFV-50, 63, 80, 00, 60: SYJ59 Example) SYJ39-GS. For details, consult your S sales representative. For option Q, the solenoid valve should be a E-compliant product. X X X Q X XY D- XS XVD XGT YV 427
15 XF/XFV Series Specifications odel Valve type Fluid Operating temperature ( ) XF XFV XF(V)-6 XF(V)-25 XF(V)- XF(V)-50 XF(V)-63 XF(V)-80 XF(V)-00 XF(V)-60 Normally closed (Pressurize to open, Spring seal) Inert gas under vacuum 5 to 60 (High temperature type: 5 to 50) 5 to 50 Operating pressure (Pa) (abs) x 0-5 to atmospheric pressure onductance (/s) Note ) Internal In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation eakage (Pa m 3 /s) External In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation Flange type F (NW) F (NW), (DN) Principal materials Note 3) ody: luminum alloy, ain part: Stainless steel, F (Standard seal material) Surface treatment External: Hard anodized Internal: Raw material Pilot pressure (Pa) (G) 0.4 to 0.7 Pilot port size XF 5 Rc/8 Rc/4 XFV 5: Port (P), Port 3(R) Rc/8: Port (P), 5: Port 3(R) XF Weight (kg) XFV Note ) onductance is the value for an elbow with the same dimensions. Note 2) For valve heater specifications, refer to ommon Option [] Heater on page 459. Note 3) coating of vacuum grease [Y-V2] is applied to the seal-material sliding portion of the vacuum part. onstruction/operation agnet (Option) Indicator (Option) Heater (Option) uto switch (Option) q onnet assembly (aintenance parts) (Including w, t, y, u, i) R P Port (P) (Pressure port) Plate Port 3(R) (Exhaust port) Solenoid valve Pilot port (pressurize to open) e Exterior seal (aintenance part) i Shaft seal (aterial: F) o Scraper (aterial: F) y Spring (aterial: Oil-tempered wire/ Electroless nickel plated) Shaft side exhaust With solenoid valve u Shaft (aterial: Stainless steel 304) t Valve (aterial: Stainless steel 304) w Valve seal (aintenance part) r ody (aterial: 6063) Valve side exhaust Refer to the back of page 465 for aintenance Parts. <Working principle> y applying the pilot pressure from the pilot port, the piston-coupled valve overcomes the spring force or operating force by pressure, and the valve opens. For the XFV, the pilot pressure is always applied to the port (P), and the valve opens when the solenoid valve is turned ON and closes when it is turned OFF. 428 <Options> uto switch: Heater: Indicator: The magnet activates the auto switch. With 2 auto switches, the open and closed positions are detected, and with auto switch, either the open or closed position is detected. uto switches are applicable at ordinary temperatures only (5 to 60 ). Simple heating is performed using thermistors. The valve body can be heated to approximately 00 or 20, depending on the heater option and the valve size. The type and number of thermistors to be used will vary depending upon size and setting temperature. In the case of high temperature specifications, the bonnet assembly is a heat resistant structure. This does not apply in cases where a solenoid valve is attached. When the valve is open, an orange marker appears in the center of the name plate.
16 luminum High Vacuum ngle Valve XF/XFV Series Dimensions XF/ir operated E (b) D E (a) øfn (F flange) øfd ( flange) E (c) Heater (Option) uto switch (Option) H R P øg XFV/With solenoid valve Port P (Pressure port) Port R (Exhaust port) N odel XF-6 XF-25 XF- XF-50 XF-63 XF-80 XF-00 XF D E Note ) 2 Fn Fd G Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions. oreover, heater mounting positions will differ depending on the type of heater. For further details, refer to mounting positions under Replacement Heaters on page 465. J (mm) H X X X Q X XY D- XS XVD XGT YV odel XFV-6 XFV-25 XFV- XFV-50 J Other dimensions are the same as the XF. Note) For details, consult your S sales representative. (mm) N (mm) odel J N XFV XFV XFV XFV Other dimensions are the same as the XF. Note) For details, consult your S sales representative. 429
17 luminum High Vacuum ngle Valve/Normally losed/ Seal XF Series ade to Order Specifications Please contact S for detailed dimensions, specifications and lead times. With ypass Valve (Flange size: 80) () () H I 7 GH VU U VVE () e Shaft seal (F) Scraper (F) Pilot port: 5 t w u X-6 -X65 r ead wire length: 500 mm ( type: 3000 mm) y Pilot port: Rc/8 ypass valve adjustment nut (Initial exhaust) djustment pitch: mm/rotation ock nut Width across flats 3 (ax. 3) 7.5 i!0 ø83 ø2 ø ø83 ø2 ø q o omponent Parts No. Description aterial Remarks ody onnet assembly Hexagon socket head cap screw Stainless steel omputer name plate uto switch Indicator ypass valve Hexagon socket head cap screw Stainless steel 0, = 60 Option Option 4, = 430 Part No. Seal material symbol N P Q R S T U Internal seal 2-2-V85V 2-V85-XN 2-V85-XP 2-V85-XQ 2-V85-XR 2-V85-X 2-V85-X 2-V85-XS 2-V85-XT 2-V85-XU External seal r S V S XN S XP S XQ S XR S X S X S XS S XT S XU Part No. Seal material symbol Internal seal 8-2-V5V External seal 8-2 S V External seal o S568-07V N 2-V5-XN S XN S XN P 2-V5-XP S XP S XP Q 2-V5-XQ S XQ S XQ R 2-V5-XR 2-V5-X 2-V5-X S XR S XR S X S X S X S X S T 2-V5-XS 2-V5-XT S XS S XT S XS S XT U 2-V5-XU S XU S XU Note) coating of vacuum grease (fluorinated grease: Y-V2) is applied to the shaft seal, scraper and o.
18 ade to Order XF Series Flange type Type F(NW) D (DN) How to Order Valve XFR 80 9N X ain valve: Indicator/ Pilot port direction Indicator Pilot port direction Without indicator Flange side Flange side F eft flange surface With indicator G J Without indicator eft flange surface Flange: uto switch type (Operating temperature 5 to 60 ) uto switch model Switch type Without auto switch (without built-in magnet) 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) 9// Solid state auto switch Reed auto switch D-93()()(Z) Without auto switch (with built-in magnet) Note) Types with auto switches are not available in case of high temperature types. type: ead wire length 3000 mm aintenance Parts w onnet ssembly Part No. XF80-30-H onnet assembly Temperature Indicator 5 to 60 5 to 50 Without indicator With indicator Without indicator With indicator Temperature specifications Temperature 5 to 60 H0 5 to 50 Flange: Number of auto switches/ounting position Quantity ounting position Without auto switch 2 pcs. pc. pc. Valve open/closed Valve open Valve closed Part no. XF XF XF80-30-H XF80-30-H Same as How to Order Specifications Valve type ain valve: Normally closed Shaft seal type seal Operating pressure range Fluid Operating temperature onductance Operating pressure Flange ypass valve mounting position/ Pilot port direction ounting position Pilot port direction Flange side eft flange eft flange surface surface Flange side Right flange 2 surface eft flange surface Rear flange 3 surface 9N-XN ypass valve: Normally closed ellows seal tmospheric pressure to x 0-5 Pa Inert gas under vacuum 5 to 60 (Option: 5 to 50 ) 200 /s ax. 25 /s (alculated value) 0.4 to 0.7 Pa F80 Seal material Seal material F EPD arrel Perfluoro alrez N P Q R S T U hemraz VQ F FOR PS UTI ROR ompound No W 79 SS592 SS630 SSE U46 arrel Perfluoro is a registered trademark of atsumura Oil o., td. alrez is a registered trademark of E. I. du Pont de Nemours and ompany or its affiliates. hemraz is a registered trademark of Greene, Tweed & o. UTI ROR is a registered trademark of Nippon Valqua Industries, td. When the seal material is not being changed, there is no need to select a symbol. Seal material changed part hanged part eakage (Pa m 3 /s or less) Note) Internal External None.3 x 0-9 (F).3 x 0-9 (F) 2-8- r 8-2 o.3 x x x x 0-9 (F) r 8-2 o.3 x 0-9 (F).3 x 0-7 Note) Values at normal temperature, excluding gas permeation. i ypass Valve Part No. X Pilot port direction Pilot port direction Rear (as seen from body connection point) eft (as seen from body connection point) Right (as seen from body connection point) Temperature specifications Temperature 5 to 60 H0 5 to 50 6 X65 Seal material changed part hanged part None Seal material: Same as the seal materials of How to Order Valve 43 X X X Q X XY b D- XS XVD XGT YV
19 luminum High Vacuum ngle Valve/Normally losed/ Seal XF Series ade to Order Specifications 2 Please contact S for detailed dimensions, specifications and lead times. With ypass Valve (Flange size: 00) () () H I GH 54 VU U VVE () e t w u X-6 -X65 ead wire length: 500 mm ( type: 3000 mm) y Shaft seal (F) Scraper (F) Pilot port: 5 r 0.2 Pilot port: Rc/8 ypass valve adjustment nut (Initial exhaust) djustment pitch: mm/rotation ock nut Width across flats 3 (ax. 3) 7.5 i!0 ø02 ø32 ø ø02 ø32 ø34 2- q 08 Part No. Seal material symbol N P Q R S T U Internal seal 2- S V S XN S XP S XQ S XR S X S X S XS S XT S XU External seal r S V S XN S XP S XQ S XR S X S X S XS S XT S XU omponent Parts No. Description aterial Remarks Part No. ody 6063 Seal material symbol Internal seal 8- External seal 8-2 External seal o 2 onnet assembly 2-V5V S V S568-07V 2- N 2-V5-XN S XN S XN 3 Hexagon socket head cap screw Stainless steel 2, = 70 P 2-V5-XP S XP S XP 4 Q 2-V5-XQ S XQ S XQ omputer name plate uto switch Indicator Option Option R 2-V5-XR 2-V5-X 2-V5-X S XR S XR S X S X S X S X 8 8- ypass valve S T 2-V5-XS 2-V5-XT S XS S XT S XS S XT 8-2 U 2-V5-XU S XU S XU 9 0 Hexagon socket head cap screw Stainless steel 4, = Note) coating of vacuum grease (fluorinated grease: Y-V2) is applied to the shaft seal, scraper and o o
20 ade to Order XF Series Flange type Type F(NW) D (DN) Specifications Valve type Shaft seal type Operating pressure range Fluid Operating temperature onductance Operating pressure Flange How to Order Valve XFR 00 9N X ain valve: Indicator/ Pilot port direction Indicator Pilot port direction Without indicator Flange side Flange side F eft flange surface With indicator G J Without indicator eft flange surface Flange: 9N()()(Z) 9P()()(Z) 9()()(Z) 90() uto switch type uto switch model Switch type Without auto switch (without built-in magnet) D-9N()()(Z) D-9P()()(Z) D-9()()(Z) D-90() 93()()(Z) D-93()()(Z) 9// Without auto switch (with built-in magnet) Note ) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Note 2) Types with auto switches are not available in case of high temperature types. aintenance Parts Solid state auto switch Reed auto switch Temperature specifications Temperature 5 to 60 H0 5 to 50 Number of auto switches/ounting position Quantity ounting position Without auto switch 2 pcs. pc. pc. Valve open/closed Valve open Valve closed ypass valve mounting position/pilot port direction ounting position Pilot port direction Flange side eft flange eft flange surface surface Flange side Right flange 2 surface eft flange surface Rear flange 3 surface Flange: w onnet ssembly Part No. XF N-XN onnet assembly Temperature Indicator 5 to 60 5 to 50 Without indicator With indicator Without indicator With indicator Part no. XF XF XF00-30-H XF00-30-H Same as How to Order ain valve: Normally closed ypass valve: Normally closed seal ellows seal tmospheric pressure to x 0-5 Pa Inert gas under vacuum 5 to 60 (Option: 5 to 50 ) 300 /s ax. 3.5 /s (alculated value) 0.4 to 0.7 Pa F00 Seal material Seal material F EPD arrel Perfluoro alrez N P Q R S T U i ypass Valve Part No. X Pilot port direction Pilot port direction Rear (as seen from body connection point) eft (as seen from body connection point) Right (as seen from body connection point) Temperature specifications Temperature 5 to 60 H0 5 to 50 hemraz VQ F FOR PS UTI ROR ompound No W 79 SS592 SS630 SSE U46 arrel Perfluoro is a registered trademark of atsumura Oil o., td. alrez is a registered trademark of E. I. du Pont de Nemours and ompany or its affiliates. hemraz is a registered trademark of Greene, Tweed & o. UTI ROR is a registered trademark of Nippon Valqua Industries, td. When the seal material is not being changed, there is no need to select a symbol. Seal material changed part hanged part eakage (Pa m 3 /s or less) Note) Internal External None.3 x 0-9 (F).3 x 0-9 (F) 2-8- r 8-2 o.3 x x x x 0-9 (F) r 8-2 o.3 x 0-9 (F).3 x 0-7 Note) Values at normal temperature, excluding gas permeation. 6 X65 Seal material changed part hanged part None Seal material: Same as the seal materials of How to Order Valve 433 X X X Q X XY b D- XS XVD XGT YV
21 luminum High Vacuum ngle Valve/Normally losed/ Seal XF Series ade to Order Specifications 3 Please contact S for detailed dimensions, specifications and lead times. With ypass Valve (Flange size: 60) () () () 200 H e t w u I GH VU U VVE X-6 -X65 ead wire length: 500 mm ( type: 3000 mm) y Shaft seal (F) Scraper (F) r 0.2 Pilot port: Rc/4 ypass valve adjustment nut (Initial exhaust) djustment pitch: mm/rotation i!0 ø53 ø88 ø90 2- q omponent Parts No. Description aterial Remarks ody onnet assembly Hexagon socket head cap screw Stainless steel omputer name plate uto switch Indicator ypass valve Hexagon socket head cap screw Stainless steel 20, = 70 Option Option 4, = 434 Pilot port: 5 (ax. 3) ø53 ø88 ø Part No. Seal material symbol N P Q R S T U ock nut Width across flats o Internal seal 2-2-G55V 2-G55-XN 2-G55-XP 2-G55-XQ 2-G55-XR 2-G55-X 2-G55-X 2-G55-XS 2-G55-XT 2-G55-XU External seal r S568-67V S XN S XP S XQ S XR S X S X S XS S XT S XU Part No. Seal material symbol Internal seal 8- External seal 8-2 External seal o 2-V5V S V S568-07V N 2-V5-XN S XN S XN P 2-V5-XP S XP S XP Q 2-V5-XQ S XQ S XQ R 2-V5-XR 2-V5-X 2-V5-X S XR S XR S X S X S X S X S T 2-V5-XS 2-V5-XT S XS S XT S XS S XT U 2-V5-XU S XU S XU Note) coating of vacuum grease (fluorinated grease: Y-V2) is applied to the shaft seal, scraper and o.
22 ade to Order XF Series Flange type Type F(NW) D (DN) Specifications Valve type Shaft seal type Operating pressure range Fluid Operating temperature onductance Operating pressure Flange XFR 60 9N X ain valve: Indicator/ Pilot port direction Indicator Pilot port direction Without indicator Flange side Flange side F eft flange surface With indicator G J Without indicator eft flange surface Flange: 9N()()(Z) 9P()()(Z) 9()()(Z) 90() 93()()(Z) D-93()()(Z) 9// Without auto switch (with built-in magnet) Note ) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Note 2) Types with auto switches are not available in case of high temperature types. aintenance Parts onnet assembly Temperature Indicator 5 to 60 Temperature specifications Temperature 5 to 60 H0 5 to 50 Number of auto switches/ounting position Quantity ounting position Without auto switch 2 pcs. pc. pc. Valve open/closed Valve open Valve closed ypass valve mounting position/pilot port direction ounting position Pilot port direction Flange side eft flange eft flange surface surface Flange side Right flange 2 surface eft flange surface Rear flange 3 surface Flange: w onnet ssembly Part No. XF N-XN 5 to 50 uto switch type uto switch model Switch type Without auto switch (without built-in magnet) D-9N()()(Z) D-9P()()(Z) Solid state auto switch D-9()()(Z) D-90() Without indicator With indicator Without indicator With indicator Reed auto switch Part no. XF XF XF60-30-H XF60-30-H Same as How to Order How to Order Valve ain valve: Normally closed ypass valve: Normally closed seal ellows seal tmospheric pressure to x 0-5 Pa Inert gas under vacuum 5 to 60 (Option: 5 to 50 ) 800 /s ax. 3.5 /s (alculated value) 0.4 to 0.7 Pa F60 Seal material Seal material F EPD arrel Perfluoro alrez N P Q R S T U hemraz VQ F FOR PS UTI ROR ompound No W 79 SS592 SS630 SSE U46 arrel Perfluoro is a registered trademark of atsumura Oil o., td. alrez is a registered trademark of E. I. du Pont de Nemours and ompany or its affiliates. hemraz is a registered trademark of Greene, Tweed & o. UTI ROR is a registered trademark of Nippon Valqua Industries, td. Seal material changed part hanged part eakage (Pa m 3 /s or less) Note) Internal External None.3 x 0-9 (F).3 x 0-9 (F) 2-8- r 8-2 o.3 x x x x 0-9 (F) r 8-2 o.3 x 0-9 (F).3 x 0-7 Note) Values at normal temperature, excluding gas permeation. i ypass Valve Part No. X Pilot port direction Pilot port direction Rear (as seen from body connection point) eft (as seen from body connection point) Right (as seen from body connection point) Temperature specifications Temperature 5 to 60 H0 5 to 50 When the seal material is not being changed, there is no need to select a symbol. 6 X65 Seal material changed part hanged part None Seal material: Same as the seal materials of How to Order Valve 435 X X X Q X XY b D- XS XVD XGT YV
23 I luminum High Vacuum ngle Valve Double cting/ Seal RoHS XG/XGV Series How to Order ade to Order specifications (For details, refer to pages 442 to 447) Flange size 6, 25, XG 6 9N XG Flange size 50, 63, 80, 00, 60 XG 50 9N q w e r t y u q Flange size Size r Temperature specifications/heater Temperature Heater 5 to 60 High H0 temperature H4 5 to 50 With 00 heater type H5 With 20 heater Note) Size 6 is not applicable for H4, H5, Size 25 not for H4. y Number of auto switches/ounting position Quantity Without auto switch 2 pcs. pc. pc. ounting position Valve open/closed Valve open Valve closed u ody surface treatment/seal material and its changed part ody surface treatment Seal material N P Q R S T U w Flange type Type Surface treatment External: Hard anodized Internal: Raw material External: Hard anodized Internal: Oxalic acid anodized Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. D F (NW) (DN) pplicable flange 6, 25,, 50 63, 80, 00, 60 63, 80, 00, 60 ompound No W 79 SS592 SS630 SSE U46 e Pilot port direction Pilot port direction Flange side eft flange surface t uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch (Not applicable to flange size 6) Without auto switch (with built-in magnet) Note ) uto switches shown above cannot be mounted on the high temperature type. For the high temperature type, a semi-standard product that uses the heat resistant auto switch D-F7NJ is available. For details, please contact S. Note 2) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N eft flange surface V V E U H V U G H Flange side Seal material changed part and leakage Note 2) hanged eakage (Pa m 3 /s or less) Note ) part Internal External None.3 x 0-0 (F).3 x 0-0 (F) w, e.3 x x 0-8 w.3 x x 0-0 (F) e.3 x 0-0 (F).3 x 0-8 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 438 for changed part. Number indicates parts number of onstruction accordingly. Note 3) Part e (exterior seal) is not changeable for sizes 6 and 25. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XG--9N-XN 436
24 I ir Operated/with Solenoid Valve luminum High Vacuum ngle Valve XG/XGV Series How to Order [Option] XGV q Flange size Size Seal material N P Q R S T U Flange size 6, 25, Flange size 50, 63, 80 w Flange type D r uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) Seal material F EPD arrel Perfluoro alrez hemraz Type F (NW) (DN) VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. XGV XGV 6 9N G 50 9N G q w e r t y u i ir operated/with solenoid valve e Pilot port direction pplicable flange 6, 25,, 50, 63, 80 63, 80 ompound No W 79 SS592 SS630 SSE U46 o!0 t Number of auto switches/ounting position Solenoid valve direction eft flange surface Flange surface type plug connector ( power supply) not attached for of sizes 6 and 25. : Size 6, 25, only. : Size 50, 63, 80 only. Quantity Without auto switch 2 pcs. pc. pc. eft flange surface ounting position Valve open/closed Valve open Valve closed Reed auto switch (Not applicable to flange size 6) 9// Without auto switch (with built-in magnet) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N y Rated voltage E-compliant u Type of actuation i Electrical entry o ight/surge voltage suppressor 00 V, 50/60 Hz 2 position single G Grommet (ead wire length 300 mm) None V, 50/60 Hz W 2 position double H Grommet (ead wire length 600 mm) S With surge voltage suppressor 3 0 V, 50/60 Hz type plug connector Z With light/surge voltage suppressor V, 50/60 Hz type plug connector With light/surge voltage suppressor U 5 24 VD (Non-polar type) 6 2 VD S type: Not available for.!0 ody surface treatment/seal material and its changed part U type: D only. ody surface treatment Seal material changed part and leakage Surface treatment Note 2) eakage (Pa m 3 /s or less) Note ) External: Hard anodized Internal: Raw material hanged part Internal External External: Hard anodized Internal: Oxalic acid anodized None.3 x 0-0 (F).3 x 0-0 (F) w, e.3 x x 0-8 w.3 x x 0-0 (F) e.3 x 0-0 (F).3 x 0-8! E-compliant Q E-compliant Remarks Without auto switch (without built-in magnet) Solid state auto switch Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 438 for changed part. Number indicates parts number of onstruction accordingly. Note 3) Part e (exterior seal) is not changeable for sizes 6 and 25. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XGV--9N-G-XN Note ) Option specifications/ombinations This model has auto switch and (DN) flange options, but high temperature/heater options are not available. Note 2) Solenoid valves 2 position single: XGV-6, 25, : SYJ390 XGV-50, 63, 80: SY320 2 position double: XGV-6, 25, : SYJ3290 XGV-50, 63, 80: SY3220 Example) SYJ390-GS, SYJ3290-GS, SY320-GS-4, SY3220-GS-4 For details, consult your S sales representative. For option Q, the solenoid valve should be a E-compliant product. V V E U H V U G H! 437 X X X Q X XY D- XS XVD XGT YV
25 R P XG/XGV Series Specifications odel Valve type Fluid Operating temperature ( ) Operating pressure (Pa) (abs) onductance (/s) Note ) Internal eakage (Pa m 3 /s) External Flange type Principal materials Surface treatment Pilot pressure (Pa) (G) Pilot port size Weight (kg) XG XGV XG XGV XG XGV XG(V)-6 XG(V)-25 XG(V)- XG-50 XG-63 XG-80 XG-00 XG-60 Double acting (Dual operation), Pressurize to open/close Inert gas under vacuum 5 to 60 (High temperature type: 5 to 50) 5 to 50 tmospheric pressure to x In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation F (NW) F (NW), (DN) ody: luminum alloy, ain part: Stainless steel, F (Standard seal material) External: Hard anodized Internal: Raw material 0.3 to to Rc/8 5: Port (P), Port 3(R), Port 5(R) Note ) onductance is the value for an elbow with the same dimensions. Note 2) For valve heater specifications, refer to ommon Option [] Heater on page 459. Note 3) coating of vacuum grease [Y-V2] is applied to the seal-material sliding portion of the vacuum part. onstruction/operation uto switch (Option) Port 5(R) (Exhaust port) Plate Heater (Option) Pilot port (pressurize to close) q onnet assembly (aintenance parts) (Including w, t, y, u) agnet (Option) Port (P) (Pressure port) Pilot port (pressurize to open) Port 3(R) (Exhaust port) Solenoid valve e Exterior seal (aintenance part) y Shaft seal (aterial: F) u Scraper (aterial: F) With solenoid valve Shaft side exhaust t Valve (aterial: Stainless steel 304) w Valve seal (aintenance part) r ody (aterial: 6063) <Working principle> y applying the pilot pressure from the pilot port P-, the piston-coupled valve overcomes the operating force by pressure, and the valve opens. (Pilot port P-2 is open.) onversely, by applying the pilot pressure to the pilot port P-2, the valve closes. (Pilot port P- is open.) For the XGV, the pilot pressure is always applied to the port (P), and the valve opens when the solenoid valve is turned ON and closes when it is turned OFF. For the double solenoid, the valve moves to the opposite side from that in which the solenoid valve is turned ON. 438 Valve side exhaust Refer to the back of page 465 for aintenance Parts. <Options> uto switch: The magnet activates the auto switch. With 2 auto switches, the open and closed positions are detected, and with auto switch, either the open or closed position is detected. uto switches are applicable at ordinary temperatures only (5 to 60 ). Heater: Simple heating is performed using thermistors. The valve body can be heated to approximately 00 or 20, depending on the heater option and the valve size. The type and number of thermistors to be used will vary depending upon size and setting temperature. In the case of high temperature specifications, the bonnet assembly is a heat resistant structure. This does not apply in cases where a solenoid valve is attached.
26 luminum High Vacuum ngle Valve XG/XGV Series Dimensions XG6, 25, / ir operated E E (b) D (a) E (c) øfn (F flange) Heater (Option) uto switch (Option) øg H J odel XG-6 XG-25 XG D 2 E Note ) Fn G H (mm) J Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions. oreover, heater mounting positions will differ depending on the type of heater. For further details, refer to mounting positions under Replacement Heaters on page XG50, 63, 80, 00, 60/ ir operated E E (b) D (a) E odel XG-50 XG-63 XG-80 XG-00 XG (c) øfn (F flange) D øfd ( flange) E Note ) Fn Fd G H Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions. oreover, heater mounting positions will differ depending on the type of heater. For further details, refer to mounting positions under Replacement Heaters on page 465. øg J H J (mm) X X X Q X XY D- XS XVD XGT YV
27 E E P XG/XGV Series Dimensions XGV/With solenoid valve R P N Port R (Exhaust port) In case of double solenoid valve Q odel XGV-6 XGV-25 XGV N P Other dimensions are the same as the XG. Note) For details, consult your S sales representative. (mm) R R In case of double solenoid valve Port R (Exhaust port) P N Port P (Pressure port) Port P (Pressure port) In case of single solenoid valve Q Q In case of single solenoid valve Port R (Exhaust port) (mm) odel XGV-50 XGV-63 XGV N P Q R Other dimensions are the same as the XG. Note) For details, consult your S sales representative. 4
28 luminum High Vacuum ngle Valve/Double cting/ Seal XG Series ade to Order Specifications Please contact S for detailed dimensions, specifications and lead times. With ypass Valve (Flange size: 80) () () () e Shaft seal (F) Scraper (F) Pilot port: 5 (ax. 3) 7.5 u o t w ø83 ø2 ø4 90 X-6 -X r ø83 ø q ead wire length: 500 mm ( type: 3,000 mm) ( type:,000 mm) (Z type: 5,000 mm) 250 F flange ø83 ø0 omponent Parts No. Description aterial Remarks ody onnet assembly Hexagon socket head cap screw omputer name plate uto switch SS Refer to maintenance parts 0, = 20 Option 7 High vacuum angle valve (ypass valve) Refer to maintenance parts Hexagon socket head cap screw Stainless steel 4, = 442 flange ypass valve adjustment nut (Initial exhaust) djustment pitch: mm/rotation ock nut Width across flats Part No. Seal material symbol N P Q R S T U 7- i Internal seal 2-2-V85V 2-V85-XN 2-V85-XP 2-V85-XQ 2-V85-XR 2-V85-X 2-V85-X 2-V85-XS 2-V85-XT 2-V85-XU y Pilot port: Rc/8 External seal r S V S XN S XP S XQ S XR S X S X S XS S XT S XU Part No. Seal material symbol Internal seal 7-2-V5V External seal 7-2 S V External seal i S568-07V N 2-V5-XN S XN S XN P 2-V5-XP S XP S XP Q 2-V5-XQ S XQ S XQ R 2-V5-XR 2-V5-X 2-V5-X S XR S XR S X S X S X S X S T 2-V5-XS 2-V5-XT S XS S XT S XS S XT U 2-V5-XU S XU S XU Note) coating of vacuum grease (fluorinated grease: Y-V2) is applied to the shaft seal, scraper and i.
29 ade to Order XG Series Flange type D Type F (NW) (DN) How to Order Valve XGR 80 X ain valve: Pilot port direction Pilot port direction Flange side eft flange surface Flange: Temperature specifications Temperature Heater 5 to 60 H0 5 to 50 uto switch type (Operating temperature 5 to 60 ) uto switch model Switch type Without auto switch ypass valve mounting position/ (without built-in magnet) Pilot port direction 9N()()(Z) D-9N()()(Z) ounting position Solid state 9P()()(Z) D-9P()()(Z) auto switch 9()()(Z) D-9()()(Z) eft flange 90() D-90() surface Reed auto switch 93()()(Z) D-93()()(Z) 9// Without auto switch (with built-in magnet) Right flange 2 surface Note) Types with auto switches are not available in case of high temperature types. Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. aintenance Parts w onnet ssembly Part No. Specifications Valve type ain valve: Double acting Shaft seal type seal Operating pressure range Fluid Operating temperature onductance Operating pressure Flange Weight 3 Rear flange surface S S Flange: Number of auto switches/ounting position Quantity ounting position Without auto switch 2 pcs. Valve open/closed pc. Valve open pc. Valve closed XG80-30-H- 9N-XN onnet assembly Temperature Part no. 5 to 60 XG to 50 XG80-30-H- Same as How to Order ypass valve: Normally closed ellows seal tmospheric pressure to x 0-5 Pa Inert gas under vacuum 5 to 60 (Option: 5 to 50 ) 200 /s ax. 25 /s (alculated value) 0.4 to 0.6 Pa F80, kg onductance is the value for the molecular flow of an elbow with the same dimensions. Pilot port direction Flange side eft flange surface Flange side eft flange surface Seal material Seal material F EPD arrel Perfluoro alrez N P Q R S T U hemraz VQ F FOR PS UTI ROR ompound No W 79 SS592 SS630 SSE U46 arrel Perfluoro is a registered trademark of atsumura Oil o., td. alrez is a registered trademark of E. I. du Pont de Nemours and ompany or its affiliates. hemraz is a registered trademark of Greene, Tweed & o. UTI ROR is a registered trademark of Nippon Valqua Industries, td. When the seal material is not being changed, there is no need to select a symbol. Seal material changed part eakage (Pa m 3 /s or less) Note) Internal External.3 x 0-9 (F).3 x 0-9 (F).3 x x x x 0-9 (F).3 x 0-9 (F).3 x 0-7 hanged part None 2-7- r 7-2 i 2-7- r 7-2 i Note) Values at normal temperature, excluding gas permeation. i ypass Valve Part No. X Pilot port direction Pilot port direction Rear (as seen from body connection point) eft (as seen from body connection point) Right (as seen from body connection point) 6 X65 Temperature specifications Temperature 5 to 60 H0 5 to 50 Seal material changed part hanged part None Seal material: Same as the seal materials of How to Order Valve 443 X X X Q X XY b D- XS XVD XGT YV
30 luminum High Vacuum ngle Valve/Double cting/ Seal XG Series ade to Order Specifications 2 Please contact S for detailed dimensions, specifications and lead times. With ypass Valve (Flange size: 00) () () 54 () Shaft seal (F) Scraper (F) Pilot port: 5 (ax. 3) 7.5 t w e X-6 -X65 r ø02 ø ead wire length: 500 mm ( type: 3,000 mm) ( type:,000 mm) (Z type: 5,000 mm) ø02 ø30 ypass valve adjustment thread (Initial exhaust) djustment pitch: mm/rotation ock nut Width across flats y Pilot port: Rc/ u flange o 7- i ø02 ø32 2- F flange ø34 q Part No. 08 Seal material symbol Internal seal 2- External seal r S V S V N S XN S XN P S XP S XP Q S XQ S XQ R S XR S XR S X S X S X S X S S XS S XS T S XT S XT U S XU S XU omponent Parts No. Description aterial Remarks Part No. ody 6063 Seal material symbol Internal seal 7- External seal 7-2 External seal i 2 onnet assembly Refer to maintenance parts 2-V5V S V S568-07V 2- N 2-V5-XN S XN S XN 3 Hexagon socket head cap screw SS 2, = 20 P 2-V5-XP S XP S XP 4 Q 2-V5-XQ S XQ S XQ 5 omputer name plate R 2-V5-XR S XR S XR 6 uto switch Option 2-V5-X S X S X 7 High vacuum angle valve 2-V5-X S X S X Refer to maintenance parts (ypass valve) S 2-V5-XS S XS S XS 7- T 2-V5-XT S XT S XT 7-2 U 2-V5-XU S XU S XU 8 Note) coating of vacuum grease (fluorinated grease: Y-V2) is applied to 9 Hexagon socket head cap screw Stainless steel 4, = the shaft seal, scraper and i. 444
31 ade to Order XG Series Flange type XGR 00 Type ain valve: Pilot port direction D F (NW) (DN) Pilot port direction Flange side eft flange surface Flange: Temperature specifications Temperature Heater 5 to 60 H0 5 to 50 uto switch type (Operating temperature 5 to 60 ) uto switch model Switch type Without auto switch ypass valve mounting position/ (without built-in magnet) Pilot port direction ounting position 9N()()(Z) 9P()()(Z) 9()()(Z) D-9N()()(Z) D-9P()()(Z) D-9()()(Z) 90() D-90() Reed auto switch 93()()(Z) D-93()()(Z) 9// Without auto switch (with built-in magnet) Note) Types with auto switches are not available in case of high temperature types. Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Specifications Valve type Shaft seal type Operating pressure range Fluid Operating temperature onductance Operating pressure Flange Weight Solid state auto switch Number of auto switches/ounting position Flange: Quantity ounting position Without auto switch 2 pcs. Valve open/closed pc. Valve open pc. Valve closed aintenance Parts w onnet ssembly Part No. XG00-30-H- 9N-XN onnet assembly Temperature 5 to 60 5 to 50 Part no. XG XG00-30-H- Same as How to Order eft flange surface Right flange surface Rear flange surface ain valve: Double acting ypass valve: Normally closed seal ellows seal tmospheric pressure to x 0-5 Pa Inert gas under vacuum 5 to 60 (Option: 5 to 50 ) 300 /s ax. 3.5 /s (alculated value) 0.4 to 0.6 Pa F00, kg onductance is the value for the molecular flow of an elbow with the same dimensions. 2 3 How to Order Valve S S X Pilot port direction Flange side eft flange surface Flange side eft flange surface Seal material Seal material F EPD arrel Perfluoro alrez N P Q R S T U hemraz VQ F FOR PS UTI ROR ompound No W 79 SS592 SS630 SSE U46 arrel Perfluoro is a registered trademark of atsumura Oil o., td. alrez is a registered trademark of E. I. du Pont de Nemours and ompany or its affiliates. hemraz is a registered trademark of Greene, Tweed & o. UTI ROR is a registered trademark of Nippon Valqua Industries, td. When the seal material is not being changed, there is no need to select a symbol. Seal material changed part hanged part eakage (Pa m 3 /s or less) Note) Internal External None.3 x 0-9 (F).3 x 0-9 (F) 2-7- r 7-2 i.3 x x x x 0-9 (F) r 7-2 i.3 x 0-9 (F).3 x 0-7 Note) Values at normal temperature, excluding gas permeation. i ypass Valve Part No. X Pilot port direction Pilot port direction Rear (as seen from body connection point) eft (as seen from body connection point) Right (as seen from body connection point) 6 X65 Temperature specifications Temperature 5 to 60 H0 5 to 50 Seal material changed part hanged part None Seal material: Same as the seal materials of How to Order Valve 445 X X X Q X XY b D- XS XVD XGT YV
32 luminum High Vacuum ngle Valve/Double cting/ Seal XG Series ade to Order Specifications 3 Please contact S for detailed dimensions, specifications and lead times. With ypass Valve (Flange size: 60) () () 200 () t w e Shaft seal (F) Scraper (F) Pilot port: 5 X-6 -X65 r ead wire length: 500 mm ( type: 3,000 mm) ( type:,000 mm) (Z type: 5,000 mm) 339 ypass valve adjustment thread (Initial exhaust) djustment pitch: mm/rotation ock nut Width across flats 3 y Pilot port: Rc/8 (ax. 3) 7.5 u o ø53 ø88 ø ø53 ø90 2- q 38 F flange omponent Parts No. Description aterial Remarks ody onnet assembly Hexagon socket head cap screw omputer name plate uto switch SS Refer to maintenance parts 20, = 30 Option 7 High vacuum angle valve (ypass valve) Refer to maintenance parts Hexagon socket head cap screw Stainless steel 4, = 446 ø53 ø80 flange Part No. Seal material symbol N P Q R S T U i Internal seal 2-2-G55V 2-G55-XN 2-G55-XP 2-G55-XQ 2-G55-XR 2-G55-X 2-G55-X 2-G55-XS 2-G55-XT 2-G55-XU External seal r S568-67V S XN S XP S XQ S XR S X S X S XS S XT S XU Part No. Seal material symbol Internal seal 7- External seal 7-2 External seal i 2-V5V S V S568-07V N 2-V5-XN S XN S XN P 2-V5-XP S XP S XP Q 2-V5-XQ S XQ S XQ R 2-V5-XR S XR S XR 2-V5-X S X S X 2-V5-X S X S X S 2-V5-XS S XS S XS T 2-V5-XT S XT S XT U 2-V5-XU S XU S XU Note) coating of vacuum grease (fluorinated grease: Y-V2) is applied to the shaft seal, scraper and i.
33 ade to Order XG Series Flange type D XGR Type F (NW) (DN) Specifications Valve type Shaft seal type Operating pressure range Fluid Operating temperature onductance Operating pressure Flange Weight 60 ain valve: Pilot port direction Pilot port direction Flange side eft flange surface Flange: Temperature specifications Temperature Heater 5 to 60 H0 5 to 50 ain valve: Double acting ypass valve: Normally closed seal ellows seal tmospheric pressure to x 0-5 Pa Inert gas under vacuum 5 to 60 (Option: 5 to 50 ) 800 /s ax. 3.5 /s (alculated value) 0.4 to 0.6 Pa F60, kg onductance is the value for the molecular flow of an elbow with the same dimensions. X Seal material Seal material F EPD arrel Perfluoro alrez N P Q R S T U hemraz VQ F FOR PS UTI ROR ompound No W 79 SS592 SS630 SSE U46 uto switch type (Operating temperature 5 to 60 ) uto switch model Switch type arrel Perfluoro is a registered trademark Without auto switch of atsumura Oil o., td. ypass valve mounting position/ (without built-in magnet) alrez Pilot port direction is a registered trademark of E. I. du Pont de Nemours and ompany or its 9N()()(Z) D-9N()()(Z) ounting position Pilot port direction affiliates. Solid state 9P()()(Z) D-9P()()(Z) S Flange side hemraz auto switch is a registered trademark of 9()()(Z) D-9()()(Z) eft flange Greene, Tweed & o. eft flange surface surface UTI ROR is a registered trademark 90() D-90() Reed auto switch of Nippon Valqua Industries, td. 93()()(Z) D-93()()(Z) S Flange side 9// Without auto switch (with built-in magnet) Right flange 2 surface When the seal material is not Note) Types with auto switches are not available in case of high temperature types. being changed, there is no need eft flange surface Standard lead wire length is 0.5 m. dd to Rear flange to select a symbol. the end of the part number when 3 m is 3 surface desired, when m, and Z when 5 m. Seal material changed part Number of auto switches/ounting position Flange: eakage (Pa m Quantity ounting position hanged part 3 /s or less) Note) Internal External Without auto switch None.3 x 0-9 (F).3 x 0-9 (F) 2 pcs. Valve open/closed 2-7- r 7-2 i.3 x x 0-7 pc. Valve open x x 0-9 (F) pc. Valve closed r 7-2 i.3 x 0-9 (F).3 x 0-7 Note) Values at normal temperature, excluding gas permeation. aintenance Parts w onnet ssembly Part No. XG60-30-H- 9N-XN onnet assembly Temperature Part no. 5 to 60 XG to 50 XG60-30-H- Same as How to Order How to Order Valve i ypass Valve Part No. X Pilot port direction Pilot port direction Rear (as seen from body connection point) eft (as seen from body connection point) Right (as seen from body connection point) 6 X65 Temperature specifications Temperature 5 to 60 H0 5 to 50 Seal material changed part hanged part None Seal material: Same as the seal materials of How to Order Valve 447 X X X Q X XY b D- XS XVD XGT YV
34 luminum High Vacuum ngle Valve 2-Step ontrol, Single cting/ellows Seal, Seal XD/XDV Series RoHS How to Order XD 25 9N q w e r t y u XD q Flange size Size w Flange type Type F (NW) D (DN) pplicable flange 25,, 50, 63, 80 63, 80, 00, 60 e Pilot port direction Pilot port direction Flange side eft flange surface eft flange surface Flange side r Temperature specifications/heater High H0 temperature H4 type H5 Temperature 5 to 60 5 to 50 Heater With 00 heater With 20 heater Note) Size 25 is not applicable for H4. y Number of auto switches/ounting position Quantity ounting position Without auto switch 2 pcs. Valve open/closed pc. Valve open pc. Valve closed u ody surface treatment/seal material and its changed part ody surface treatment Seal material N P Q R S T U Surface treatment External: Hard anodized Internal: Raw material External: Hard anodized Internal: Oxalic acid anodized Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. ompound No W 79 SS592 SS630 SSE U46 t uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch Without auto switch (with built-in magnet) Note ) uto switches shown above cannot be mounted on the high temperature type. For the high temperature type, a semi-standard product that uses the heat resistant auto switch D-F7NJ is available. For details, please contact S. Note 2) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N Seal material changed part and leakage Note 2), 3) hanged eakage (Pa m 3 /s or less) Note ) part Internal External None.3 x 0-0 (F).3 x 0 - (F) w, e, r, t.3 x x 0-9 w, r, t.3 x x 0 - (F) e.3 x 0-0 (F).3 x 0-9 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 45 for changed part. Number indicates parts number of onstruction accordingly. Note 3) hanges to seal material for part no. r S valve seal assembly are only applicable for sizes 25, and 50. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XD-25-9N-XN 448
35 ir Operated/with Solenoid Valve luminum High Vacuum ngle Valve XD/XDV Series How to Order [Option] XDV 25 9N G q w e r t y u i o!0 XDV q Flange size w Flange type Size Type 25 F (NW) D (DN) r uto switch type uto switch model 9N()()(Z) D-9N()()(Z) 9P()()(Z) D-9P()()(Z) 9()()(Z) D-9()()(Z) 90() D-90() 93()()(Z) D-93()()(Z) 9// ir operated/with solenoid valve pplicable flange 25,, 50, 63, 80 63, 80, 00, 60 Remarks Without auto switch (without built-in magnet) Solid state auto switch Reed auto switch Without auto switch (with built-in magnet) Standard lead wire length is 0.5 m. dd to the end of the part number when 3 m is desired, when m, and Z when 5 m. Example) -9N y Rated voltage E-compliant u Electrical entry e Solenoid valve direction Solenoid valve direction eft flange surface type is not available for size 25. eft flange surface t Number of auto switches/ounting position Quantity Without auto switch 2 pcs. pc. pc. ounting position Valve open/closed Valve open Valve closed i ight/surge voltage suppressor!0 E-compliant 00 V, 50/60 Hz G Grommet (ead wire length 300 mm) None V, 50/60 Hz H Grommet (ead wire length 600 mm) S With surge voltage suppressor Q E-compliant 3 0 V, 50/60 Hz type plug connector Z With light/surge voltage suppressor V, 50/60 Hz type plug connector With light/surge voltage suppressor U 5 24 VD (Non-polar type) 6 2 VD S type: Not available for. o ody surface treatment/seal material and its changed part U type: D only. ody surface treatment Seal material changed part and leakage Surface treatment Note 2), 3) eakage (Pa m 3 /s or less) Note ) External: Hard anodized Internal: Raw material hanged part Internal External External: Hard anodized Internal: Oxalic acid anodized None.3 x 0-0 (F).3 x 0 - (F) w, e, r, t w, r, t e.3 x x x 0-0 (F).3 x x 0 - (F).3 x 0-9 Seal material N P Q R S T U Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. ompound No W 79 SS592 SS630 SSE U46 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 45 for changed part. Number indicates parts number of onstruction accordingly. Note 3) hanges to seal material for part no. r S valve seal assembly are only applicable for sizes 25, and 50. To order something other than (standard), list the symbols starting with X, followed by each symbol for body surface treatment, seal material and then changed part. Example) XDV-25-9N-G-XN Note ) Option specifications/ombinations This model has auto switch and (DN) flange options, but high temperature/heater options are not available. Note 2) Solenoid valves ain exhaust odel Initial exhaust valve valve Example XDV-25 V4 V4-GS V4 XDV-/50/63/80/00/60 SYJ34 SYJ34-GS For details, consult your S sales representative. For option Q, the solenoid valve should be a E-compliant product. 449 X X X Q X XY D- XS XVD XGT YV
36 XD/XDV Series Specifications odel Valve type Fluid XD Operating temperature ( ) XDV Operating pressure (Pa) (abs) ain exhaust valve onductance (/s) Note ) Initial exhaust valve eakage (Pa m 3 /s) Flange type Principal materials Note 3) Surface treatment Pilot pressure (Pa) (G) Pilot port size Weight (kg) Internal External XD XDV XD XDV XD(V)-25 XD(V)- XD(V)-50 XD(V)-63 XD(V)-80 XD(V)-00 XD(V)-60 Normally closed (Spring Return and seal) [oth main & initial exhaust valves] Inert gas under vacuum 5 to 60 (High temperature type: 5 to 50) 5 to 50 x 0-6 to atmospheric pressure to 3 2 to to 4 to 8 4 to to to 3.5 In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation In case of standard material F:.3 x 0 - at normal temperature, excluding gas permeation F (NW) F (NW), (DN) ody: luminum alloy, ellows: Stainless steel 36, ain part: Stainless steel, F (Standard seal material) External: Hard anodized Internal: Raw material 0.4 to 0.7 [oth main & initial exhaust valves] 5 Rc/8 Rc/4 5: Port (P), Port 3(R) Note ) The main exhaust valve conductance is the valve for the molecular flow of an elbow with the same dimensions. The initial exhaust valve conductance is the value for the viscous flow. Note 2) For valve heater specifications, refer to ommon Option [] Heater on page 459. Note 3) coating of vacuum grease [Y-V2] is applied to the seal-material sliding portion (initial exhaust valves sliding parts) of the vacuum part. 450
37 luminum High Vacuum ngle Valve XD/XDV Series onstruction/operation Initial exhaust solenoid valve With solenoid valve djustment nut (External knurling product) Valve open adjustment for initial exhaust) agnet (Option) "" uto switch (Option) q onnet assembly (aintenance parts) (Including w, r, t, u, i, o,!0) ellows holder!0 (aterial: Stainless steel 304) Heater (Option) Pilot port S (for initial exhaust valve) Pilot port (for main exhaust valve) Port 3(R) (Exhaust port) ain exhaust solenoid valve Initial exhaust solenoid valve XDV-25 Port (P) (Supply port) ellows o (aterial: Stainless steel 36) for S Valve sliding (aterial: F) for fixing t Valve u (aterial: Stainless steel 304) e Exterior seal (aintenance part) ellows side exhaust ain exhaust solenoid valve Plate Port 3(R) (Exhaust port) Port (P) (Pressure port) ody y (aterial: 6063) S Valve i (aterial: Stainless steel 304) Valve side exhaust w Valve seal (aintenance part) r S Valve seat assembly (aintenance parts) (aterial: Stainless steel Sealant) Refer to the back of page 465 for aintenance Parts. for S valve sliding XDV- to 60 t <Working principle> z Initial exhaust valve opening adjustment The initial exhaust rate should be adjusted without applying the pilot pressure to the pilot port S before operation. The initial exhaust rate is set to zero by gently turning the adjustment nut clockwise until it stops. (Do not use any tools.) The initial exhaust rate is adjusted by turning the adjustment nut counterclockwise. x Opening of the initial exhaust valve (valve S) When the pilot pressure is applied to the pilot port S, the valve S is removed from the valve S seal assembly, and the valve opens the adjusted amount. For the XDV, when the pilot pressure is always applied to the port (P) and the initial exhaust solenoid valve is turned ON, the valve opens the adjusted amount. c Opening of the main exhaust valve (valve ) When the pilot pressure is applied to the pilot port, the valve is removed from the body seat portion, and the valve fully opens. For the XDV, when the pilot pressure is applied to the port (P) and the initial exhaust solenoid valve is turned ON, the valve fully opens. v losing of the initial exhaust / main exhaust valves y removing the pilot pressure from the pilot port S and pilot port, both S and valves return to their previous positions and they are sealed. For the XDV, by turning OFF the initial exhaust valve and main exhaust valve, both S and valves return to their previous positions and they are sealed. i djustment nut rotations n Initial exhaust valve conductance <Options> uto switch: The magnet actuates the auto switch. With two auto (for main switches, the open and closed positions are detected, exhaust and with one auto switch, either the open or closed valve position is detected. uto switches are applicable at ordinary temperatures only (5 to 60 ). Heater: Simple heating is performed using thermistors. The valve body can be heated to approximately 00 or 20, depending on the heater option and valve size. The type and number of thermistors to be used will vary depending upon size and setting temperature. In the case of high temperature specifications, the bonnet assembly is a heat resistant structure. This is not available with solenoid valve. Note) The adjustment nut does not rotate during valve operation. However, rotation of the adjustment nut can be fixed to prevent incorrect operation. When fixing the adjustment nut after setting, tighten it with the tightening torque shown in the table below. (Tightening with excessive torque can result in damaged components or the generation of abnormal noise.) Section Thread Tightening Torque odel XD(V)-25 XD(V)- XD(V)-50 XD(V)-63 XD(V)-80 XD(V)-00 XD(V)-60 Tightening torque 0.08 N m (0.8 kgf cm) or less 0.3 N m (3 kgf cm) or less r Initial exhaust valve conductance /s (viscous flow) XD-25 XD-50 XD- XD-00 XD-60 XD-63 XD X X X Q X XY D- XS XVD XGT YV
38 XD/XDV Series Dimensions XD/ir operated E (b) D E (a) øfn (F flange) øfd ( flange) E (c) Heater (Option) uto switch (Option) S J H øg odel XD-25 XD- XD-50 XD-63 XD-80 XD-00 XD D Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions. oreover, heater mounting positions will differ depending on the type of heater. For further details, refer to mounting positions under Replacement Heaters on page 465. E 2 Fn Fd G H J (mm)
39 luminum High Vacuum ngle Valve XD/XDV Series Dimensions XDV-25/With solenoid valve (For ) 55.4 (For D) 48 UUVV GHV E I H ø (F flange) (38.5) max. Initial exhaust solenoid valve 5 Port 3(R) (EXH) (Exhaust port) Port (P) (Pressure port) ø26 ain exhaust solenoid valve 50 XDV- to 60/With solenoid valve øfn (F flange) øfd ( flange) X 5 Port 3(R) (Exhaust port) uto switch (Option) X X Q Initial exhaust solenoid valve N X XY D- ain exhaust solenoid valve Port (P) (Pressure port) øg XS XVD XGT YV odel Fn Fd G N XDV XDV XDV XDV XDV XDV Note) For details, consult your S sales representative. (mm)
40 luminum High Vacuum ngle Valve anual/ellows Seal XH Series RoHS XH XH 6 q w e w Heater H4 H5 Heater With 00 heater With 20 heater pplicable flange size eody surface treatment/seal material and its changed part Note) Size 6 is not applicable for H4, H5, Size 25 not for H4. ody surface treatment Seal material changed part and leakage Note 2) Surface treatment eakage (Pa m hanged /s or less) External: Hard anodized Internal: Raw material part Internal External: Hard anodized Internal: Oxalic acid anodized None.3 x 0-0 (F) w, e.3 x 0-8 w.3 x 0-8 e.3 x 0-0 (F) Seal material N P Q R S T U Seal material F EPD arrel Perfluoro alrez hemraz VQ F for Plasma UTI ROR Produced by itsubishi able Industries, td. Specifications High vacuum manual angle valve (ellows seal) q Flange size Size ompound No W 79 SS592 SS630 SSE U46 How to Order Note ) External.3 x 0 - (F).3 x x 0 - (F).3 x 0-9 Note ) Values at normal temperature, excluding gas permeation. Note 2) Refer to parts number of onstruction on page 455 for changed part. Number indicates parts number of onstruction accordingly. To order something other than (standard), list the symbols starting with X, followed by each symbol for "body surface treatment", "seal material" and then changed part. Example) XH-6-XN odel XH-6 XH-25 XH- XH-50 Valve type Fluid ( ) Operating pressure (Pa) (abs) Inert gas under vacuum 5 to to atmospheric pressure onductance (/s) Note ) eakage (Pa m 3 /s) Flange type Principal materials Internal External In case of standard material F:.3 x 0-0 at normal temperature, excluding gas permeation In case of standard material F:.3 x 0 - at normal temperature, excluding gas permeation F (NW) ody: luminum alloy, ellows: Stainless steel 36, ain part: Stainless steel, F (Standard seal material) Surface treatment External: Hard anodized Internal: Raw material ctuation torque (N m) Handle revolutions Weight (kg) Note ) The conductance is the same as that of an elbow of the same dimensions. Note 2) For valve heater specifications, refer to ommon Option [] Heater on page
41 luminum High Vacuum ngle Valve XH Series onstruction/operation Indicator Handle assembly (aintenance parts) q (Including w, t, y, u) u ellows holder (aterial: Stainless steel 304) Heater (Option) e Exterior seal (aintenance part) y ellows (aterial: Stainless steel 36) ellows side exhaust t Valve (aterial: Stainless steel 304) w Valve seal (aintenance part) Valve side exhaust r ody (aterial: 6063) Refer to the back of page 465 for aintenance Parts. <Working principle> y turning the handle to the left, the valve opens. The handle does not move up and down, but the indicator shows the open or closed position of the valve. s the handle is turned to the right, the valve closes, and when the turning force of the handle suddenly ceases to be felt, the valve is sealed. The sealing force for the valve comes from the spring, and is constant. <Options> Heater: Simple heating is performed using thermistors. The valve body can be heated to approximately 00 or 20, depending on the valve size. The type and number of thermistors to be used will vary depending upon size and setting temperature. Indicator: When the valve is open, an orange marker appears in the center of the name plate. Dimensions E (b) D odel XH-6 XH-25 XH- XH-50 (a) E E (c) øh D 2 2 E Note ) 2 Note ) Dimension E applies when heater option is included. (ead wire length: approx. m) Note 2) (a), (b) and (c) in the above drawing indicate heater mounting positions. oreover, heater mounting positions will differ depending on the type of heater. For further details, refer to mounting positions under Replacement Heaters on page 465. øf øg F G (mm) H X X X Q X XY D- XS XVD XGT YV
42 luminum High Vacuum ngle Valve Electromagnetic/ellows Pressure alance XS Series RoHS How to Order Without control power supply With control power supply Starting voltage 5 24 VD Note ) Holding voltage is 25% of starting voltage. Note 2) For other rated voltages (48, 00 VD), please consult with S. XS 25 5 XS 25 P Electrical entry G T D G G Grommet onduit Terminal DIN terminal E-compliant Q Note) E-compliant Note) DIN terminal D only for 00 VD High vacuum angle valve (ellows pressure balance, 2-stage voltage switching type) 6 25 Valve size F6 F25 ontrol power supply P With control power supply Note) There are no E-compliant products with the control power supply. Electrical entry G Grommet Voltage 00 V V 5 24 VD Warning () In case there is no control power supply (XS-25- : 24/48/00 VD), starting voltage should be applied for only 0.5 to 0.2 s, in accordance with the prescribed method (indicated on the back of the coil). ontinuously applying starting voltage can cause overheating of the coil and fire. Holding voltage is 25% of the starting voltage (the application method is shown on the back of the solenoid coil). Example) Starting voltage Voltage 6 VD 24 VD Holding voltage 0.5 to 0.2 Time (s) 456
Aluminum High Vacuum Angle Valve
luminum High Vacuum ngle Valve Series X RoHS X X Q High fluorine resistance inimal outgassing inimal contamination from heavy metals X YV ø00, ø60 XF(V) 09 ightweight, ompact arge conductance, small body
More informationAluminum High Vacuum Angle Valve
luminum High Vacuum ngle Valve Series X X High fluorine resistance inimal outgassing inimal contamination from heavy metals X Q X YV ø00, ø60 XF(V) 9 ightweight, ompact arge conductance, small body luminum
More informationAluminum High Vacuum Angle Valve
luminum High Vacuum ngle Valve Series X X High fluorine resistance inimal outgassing inimal contamination from heavy metals X Q X YV ø00, ø60 XF(V) ourtesy of Steven Engineering, Inc.-0 Ryan Way, South
More informationXL Series. High Vacuum Angle Valve
High Vacuum ngle Valve X Series N ight weight and compact Uniform baking temperature High fluorine resistance ow outgassing ittle heavy metal contamination Series X High Vacuum ngle Valve ight weight &
More informationCAT.E 271- CAT.E829- High Vacuum Angle Valve. Series XL
T.E 7- T.E89- High Vacuum ngle Valve Series XL Light weight & compact Large conductance with a small valve body. High Vacuum ngle Valve Series XL High fluorine resistance Excellent resistance against fluorine
More informationStainless Steel High Vacuum Angle/In-line Valve
Stainless Steel igh Vacuum ngle/in-line Valve XM, XY Series ody material: SS3 (conforms to Stainless steel 304) precision casting, unified composition prevents accumulation of gas. The XM series is interchangeable
More informationStainless Steel High Vacuum Angle/In-line Valve
Stainless Steel igh Vacuum ngle/in-line Valve Series XM, XY XL XL Q XM XY - XV XT YV ngle type/ Series XM In-line type Series XY ody material: SS3 (conforms to Stainless steel 304) precision casting, unified
More informationSeries XLS. Electromagnetic Type Bellows Pressure Balance XLS 25 5 G XLS 25 P 1 G. High Vacuum Angle Valve. Without control power supply
High Vacuum ngle Valve Series XLS Electromagnetic Type ellows Pressure alance How to Order Starting voltage 5 24 V 9 Other (48 V, 00 V ) Note) Holding voltage is 25% of starting voltage. Electrical entry
More informationNormally Closed Type High Vacuum Straight Solenoid Valve. How to Order XSA S 5 G. Fitting size. Fitting Type
Series XS Normally losed Type igh Vacuum Straight Solenoid Valve ow to Order [Option] Normally closed high vacuum straight solenoid valve XS 1 1 S Solenoid size 1 No.1 No. No. 1 Orifice symbol ø ø ø4.
More informationCompact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55
55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard
More informationHigh Vacuum L Type Valve
Doc. no. PRODUCT NAME High Vacuum L Type Valve MODEL / Series / Product Number XLFV-2 Series Contents Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 1. Product Specific Precautions
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationCompact Cylinder With Solenoid Valve
Compact Cylinder With Solenoid Valve Series ø, ø, ø, ø Valve and compact cylinder integrated for compactness Solenoid valve abor saving No need to select size of valve ess piping work Compact cylinder
More informationHigh Vacuum L Type Valve PRODUCT NAME. XLD Series MODEL/ Series
Doc. no. High Vacuum L Type Valve PRODUCT NAME XLD Series MODEL/ Series Thank you for purchasing this SMC product. Be sure to read this Operation Manual carefully and understand its contents before operating
More informationCompact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More information10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry
Series 0-VQ00 port solenoid valve How to Order Valves 0 VQ 0 F ir cylinder Clean series Series VQ Compact port valve Type of actuation Normally closed Note) Normally open Note) Normally open type is available
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationLow Profile Slide Table Series MXF ø8, ø12, ø16, ø20
Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with
More information3 million cycles. High Pressure Coolant Valve. SGH Series W (24 VDC) (With light/surge voltage suppressor: 0.58 W)
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationValve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
More information1.8 w. 3 Port Solenoid Valve. VT307 Series. Direct Operated Poppet Type. Power consumption. A single valve with various valve functions
Port Solenoid Valve VT07 Series Direct Operated Poppet Type Power consumption 4 Standard wtype (Current product: 4.8 W) Energy-saving type.8 w (Current product: 2 W) Vacuum applications 0.2 kpa [Option]
More informationVNA Application example. 3-port dual pressure, N.C. type SGH. Nozzle SGH. Coolant pump
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationClamp Cylinder with Lock
Clamp Cylinder with ock CK Series aintains a clamped or unclamped state when air supply pressure drops or residual pressure is released. Total length reduced by mm ody is shortened while maintaining the
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170
More informationCompact Rotary Actuator
Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle
More informationLow Profile Slide Table. Series MXF. ø8, ø12, ø16, ø20. Body mounting(body tapped)
Low Profile Slide Table Series XF ø, ø, ø1, ø Slim and compact style air slide table has parallel design for guide and cylinder. Standard stroke adjustment can be adjusted at each stroke end within mm
More informationMini Free Mount Cylinder
Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded
More informationPilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry ir VQ0/30 Series Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 Series VCH VDW SX0
More informationAir Slide Table Series MXP
ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block
More informationSeries SV1000/2000/3000/4000
Valve/Sub-plate Type IP67 Compliant Series 000/000/000/000 How to Order C () () () () () () (E) (E) () (E) (E) () () (E) (E) () () (E) (E) () () (E) (E) Type of actuation position single position double
More informationCoolant Valve. VNC Series. Cylinder actuation by pilot air
oolant VN Series ir Operated/xternal Pilot Solenoid [Option] ylinder actuation by pilot air Wide selection of port and variations Threaded type (6 to ) lange type (3 to 80) Low water hammer or details,
More informationHigh Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual
High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity
More informationCompact Cylinder with Lock
ompact ylinder with ock Series Q ø, ø, ø, ø, ø, ø, ø, ø J2 2 1 1 N N N NS S Q RQ U P 1 rop prevention when the pressure of air source is decreased or the residual pressure is released. rop prevention for
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More information3 Port Solenoid Valve Direct Operated Poppet Type. Body type. T Body ported O Manifold. Valve option
3 Port Solenoid Valve Direct Operated Poppet Type VT317 Series Rubber Seal [Option] Note) CE-compliant: Electrical entry is applicable only for the DIN terminal. Compact yet provides a large flow capacity
More informationFluid Internal pilot Operating pressure range (MPa) External pilot Operating pressure range (MPa) 2 position single
Valve Manifold Common Specifications Solenoid Valve Specifications Made to Order Specifications (For details, refer to page --08.) JIS Symbol position single solenoid position double solenoid position
More informationSeries VQZ1000/2000/3000 Single Unit
+- ase Mounted lug Lead Unit ort Solenoid Valve Series VQZ// Single Unit [Option] How to Order Valve Made to Order (For details, refer to page 7.) VQZ Series VQZ body width mm VQZ body width mm VQZ body
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationSeries RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly
More informationVNA VNB SGC SGH VNC VNH VND VCC
Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
More informationHow to Order Valve. Body type. Symbol Body type B Base mounted with screws 10 S070 B 5 B G 10 S070 C 5 B G 32. Body type.
Series -S00 ompact Direct Operated Port Solenoid Valve ontrol Valves ase mounted ody ported lean Series lean Series V S R oil voltage 24 VD VD VD VD VD Power consumption Pressure specification Flow rate
More informationInformation. Electric Slide Table/In-line Motor Type. Series LESH D. In-line motor type newly added to electric slide table! Reduced cycle time
Information Electric Slide Table/In-line Motor Type Series ESHD In-line type newly added to electric slide table! Width dimension shortened by up to % kihabara UDX F, --, Sotokanda, Chiyoda-ku, Tokyo 0-00,
More information5 Port Solenoid Valve. High speed response type) Series. Body ported VQZ1 2 VQZ2 2 VQZ3 2 VQZ1 5 VQZ2 5 VQZ3 5. Base mounted
Metal Seal ort Solenoid Valve Series // Rubber Seal.. ower consumption:. W/. W Compact, High Flow Series Valve width (mm) (Standard) (High pressure type, High speed response type) ody ported ase mounted
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationHow to Order Single Unit 25A-ZK2 A 12 N 0 N N 08. e Combination of supply valve Note 3) and release valve. Note 5) K
Vacuum Unit RoHS Series 25-ZK2 How to Order Single Unit Ejector System (with Valve) Ejector System (without Valve) 25-ZK2 12 K 5 08 25-ZK2 12 0 08 q w e r t y u i Remains blank when option is not selected.
More informationSeries CXS ø6, ø10, ø15, ø20, ø25, ø32
Variations Bore size Dual Rod Cylinder Series CXS ø6, ø, ø15, ø, ø25, ø32 Dual rod cylinder unit with guide function for pick & place applications Twice the thrust Through the adoption of dual rod construction,
More informationAir Slide Table. ø6, ø8, ø12, ø16, ø20, ø25. Work table and air cylinder are compactly integrated.
ir Slide Table Series XS ø, ø, ø1, ø1, ø, ø X XU XS XQ X XW X XP XY TS Work table and air cylinder are compactly integrated. D- ndividual 9 ir slide table is suited for precision assembly. Symmetric Type
More informationSeries VP3145/3165/3185
Large flow capacity, small exhaust resistance (Refer to Flow Characteristic table.) Easy conversion to N.C. or N.O. N.C. N.C. X (P) N.O. N.O. X (P) Series VP 3 port Function plate makes it possible to
More informationMiniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
More information3 Port Solenoid Valve. Copper-free specifications. The fluid contacting section is copper-free and the standard style can be used as it is.
Port Solenoid Valve Series VQ 00 Unprecedented high speed, stable response, and extra-long service life. ON:.ms, OFF: ms, Dispension accuracy ±ms (With indicator light and surge voltage suppressor; supply
More informationSeries SYJ300/500/700
ort Solenoid Valve ubber Seal Series SYJ00/00/00 Low power consumption: 0.W (Without light) (Current draw: 1m at 4V DC) Completely interchangeable ilot exhaust with the previous series VJ00/00/00 and VZ00/00.
More informationBase Mounted Metal Seal/Rubber Seal VQ0000 (VV5Q05) VQ1000 (VV5Q11) Individual SUP spacer. Individual EXH spacer
Base Mounted Metal Seal/Rubber Seal VQ Built-in silencer, direct exhaust Space-saving profile All pilot valves are compactly mounted on one side. The space-saving design of mounting all fittings on one
More informationAGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
More informationSeries VQ Port Solenoid Valve
Port Solenoid Valve Series VQ00 Outstandingly high speed, stable response, and long service life. ON:. ms, OFF: ms, Dispension accuracy ms (; supply pressure 0. MPa) 00 million cycles or more (Factors
More information5 Port Solenoid Valve
ort Solenoid Valve Metal Seal / Rubber Seal ower consumption:..w/..w ower consumption:. W/. W Compact, High Flow (Standard) (High pressure type, High speed response type) ody ported ase mounted Series
More informationEnergy saving Air consumption between the valve and cylinder reduced by approximately 50%. Piping is possible with a single tube.
Compact Cylinder With Solenoid Valve Valve and compact cylinder integrated for compactness New s ø, ø added. Solenoid valve Compact cylinder abor saving No need to select size of valve ess piping work
More informationSteam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.
Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
More information10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More information3 Port Solenoid Valve
Port Solenoid Valve Series VQ00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, C 9080-0-Main Office: (0) 88-900-Outside Local rea: (800) 8-900-www.stevenengineering.com Outstandingly
More informationCoolant Valve. Air Operated/External Pilot Solenoid
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) lange type (3 to ) Low water hammer or details, refer to page
More informationSeries SY3000/5000/7000
Type20P 5 Port Solenoid Valve ody Ported Manifold ar Stock Type/Flat Ribbon Cable Series SY3000/5000/7000 How to Order Manifold How to Order Manifold ssembly (Example) SS5Y 5 20P 05 Manifold series 3 SY3000
More informationFieldbus System (Output device for driving 5 port solenoid valves)
Fieldbus System (Output device for driving port solenoid valves) New Compact 8mm (ctual size) Space-saving Installation IP67 RoHS EtherNet/IP added! For units with D-sub connector, and when connected to
More informationExclusively for air pressure system and air-hydro circuit control
Process Valve Series Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external
More informationCompact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact.
Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø, ø, ø1, ø, ø, ø With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Series Variations
More information3 Port Air Operated Valve
Port Air Operated Valve 00/500/00 Series RoHS 1555 00/500/00 Series Model Selection by Operating Conditions q Air Operated Valve: Single Unit Series Sonic conductance C [dm /(s bar)] Type of actuation
More informationCompact / Lightweight 2 Port Solenoid Valve
ompact / Lightweight 2 Port Solenoid Valve /-XF For ir/water ompact / Lightweight resin body (PPS) Weight: 20 g (-XF) RoHS IP65 mm Power consumption 3 W (Standard) 0.5 W (With power-saving circuit) 48
More informationReduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
More informationVacuum System Peripherals
Vacuum System Peripherals Vacuum Regulator/Electronic Vacuum Regulator Vacuum regulator: IRV0/0 Electronic vacuum regulator: ITV009/ITV09 Directional Control Valve Selection guide of directional control
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationAGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
More informationCompact Cylinder Remodeled with a new body to get more flexibility! Can mount small auto switches on 4 surfaces.
Compact Cylinder Remodeled with a new body to get more flexibility! Can mount small auto switches on 4 surfaces. New uto switches can be mounted on any of the 4 surfaces, depending on the installation
More informationSoft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
More informationHigh Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ D- -X
ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical () 46-4 www.cmafh.com High Power ylinder ø, ø, ø3, ø4, ø, ø, ø, ø 33 RE RE RE Y X RH ourtesy of M/Flodyne/Hydradyne
More informationIsolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1
Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11
More informationCoolant Valve. Series VNC. Cylinder actuation by pilot air. Wide selection of port size and variations
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) type (3 to ) Low water hammer or details, refer to page 07. Large
More informationSeries CRQ2. Compact Rotary Actuator Rack & Pinion Style. Size: 10, 15, 20, 30, 40. Rotary actuator body serves as a flange.
Compact Rotary ctuator Rack & Pinion Style Series CRQ2 :,,,, Unidirectional pipe connection possible uilt-in cushion, : Rubber bumper,, : ir cushion Equipped with an angle adjusting mechanism Double piston
More information3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder
More informationVXP21/22/23 Series. Pilot Operated 2 Port Solenoid Valve. For Air, Gas, Steam, Water and Oil VX2 VXK VXD VXZ VXS VXB VXE VXP VXR VXH VXF VX3 VXA
Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil Variations.O..C. Wide variations of combination. ble to control a wide variety of fluids. Valve can be matched to particular
More informationDiscrete air operated 2 port valve (compact cylinder valve) NC (normally closed) type
N Series Discrete air operated port valve (compact cylinder valve) N* Series N (normally closed) type, NO (normally open) type, double acting type Port size: Rc/, Rc/ Working fluid: air, water, gas JIS
More information2 Port Valve For Compressed Air and Air-hydro Circuit Control. Exclusively for air pressure system and air-hydro circuit control
Process Valve Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external pilot
More informationCompact Guide Cylinder Series MGQ
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
More informationHow to Order Single Unit 25A-ZK2 A 12 N 0 N N 08. e Combination of supply valve Note 3) and release valve. Note 5) K. Note 6)
Vacuum Unit RoHS Series 25A-ZK2 How to Order Single Unit Ejector System (with Valve) Ejector System (without Valve) 25A-ZK2 A 12 K 5 A 08 25A-ZK2 A 12 0 08 q w e r t y u i Remains blank when option is
More informationSpace Saving Vacuum Ejector / Vacuum Pump System
CT.US0-1'-UK Space Saving acuum jector / acuum ump System Conventional ZX 21. mm mm ZQ Series ZQ Width mm Weight 9 g Single unit with vacuum pressure switch and suction filter jector ump System NW asy-to-use
More informationInformation. Electric Actuator/Rod Type. Added size 63 to the LEY series! Series LEY AC Servo Motor (400 W) Size: 63. RoHS
Information SC Corporation Akihabara UDX 1F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 1-21, JAPAN http://www.smcworld.com 12 SC Corporation All Rights Reserved Electric Actuator/Rod Type Series EY AC Servo
More informationVacuum / Release Unit
Rubber Seal Vacuum / Release Unit Series VQD1000-V Response speed 13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Distance from the unit to the work area Smooth detachment of a work piece without over-blow
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 MPa Pilot Operated / Port Solenoid Valve & Check Valve Series VCH VCH4/4: Port VCH40: Port VCHC40: Check Valve Pilot Operated Port Solenoid Valve Series VCH40 Stable responsiveness Response time dispersion
More informationCAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:
CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating
More informationGenesis Modular Valves
3SETION 3.5 SPEIFITIONS Port Os: 3 /4 to 2 inches. Larger sizes and metric tubing diameters available on request Mating flange s: NW -16 through 5 standard ir fittings: 5 /32 inch One-Touch Materials ody:
More information3 Port Solenoid Valve
ubber Seal 3 ort Solenoid Valve Series SYJ300/00/700 SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M. V3 Cover
More information5 Port Solenoid Valve
Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size
More informationOption. Nil. 02 to 24 B Note 2) K Note 3) N. Note 1) Cable/SI unit specifications
Series -SQ00 Port Solenoid Valve Plug-in Unit [Option] How to Order Manifold Electrical entry F kit D-sub connector kit P kit SSQ 08 FD Kit type Flat ribbon cable connector kit J kit Flat ribbon cable
More information13 msec (at 500 mm )/18.5 msec (at 1000 mm )
Vacuum / Release Unit Series VQD1000-V Rubber Seal Response speed 13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Distance from the unit to the work area [Option] Smooth detachment of a work piece without
More informationBellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
More informationVane Type Rotary Actuator 50, 63, 80, 100
Vane Type Rotary Actuator 5, 63, 8, 1 New Compact auto switches are mountable! (D-M9 ) Compact auto switch D-M9 Stainless steel specification for main parts : 5, 63, 8, 1 Special screw Hexagon socket head
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
More informationCable Appendix. Valves. Cable Appendix. Page 16. Multi-way cables. D-sub Connector Cables. AXT100-DS Conforming to MIL-C-24308
Cable ppendix Cable ppendix Multi-way cables The multi-pole connector cables used on SMC valves are common across several ranges. Cables are available in accordance with the MIL standard C-08 and also
More information