VXP21/22/23 Series. Pilot Operated 2 Port Solenoid Valve. For Air, Gas, Steam, Water and Oil VX2 VXK VXD VXZ VXS VXB VXE VXP VXR VXH VXF VX3 VXA

Transcription

1 Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil Variations.O..C. Wide variations of combination. ble to control a wide variety of fluids. Valve can be matched to particular application through selection of body materials (C37/CC8 or ), seal material (R, PTFE, or ) and solenoid coil (Class or ). Easy to disassemble and reassemble in a short time. Flange for threaded ports available. (3 to ) VX VXK VX VXZ VXS VX VXE VXP VXR VX VXF VX3 VX ormally closed (.C.) ormally open (.O.) Valve rommet Conduit I terminal Conduit terminal Coil: Class, Class C Standard Semi-standard Standard Semi-standard ody Seal Solenoid coil Rated voltage 00 V, 00 V 48 V, 0 V, 0 V, V 4 V V Material C37/CC8, R,,, PTFE Port size Orifice dia. (mmø) Threaded type VXP30 Rc 4, 3 8, 0 VXP Rc 3 8, 5 VXP Rc VXP Rc 5 VXP70 Rc 4 VXP380 Rc VXP390 Rc Flange type VXP70 3 VXP380 VXP390 3

2 Pilot Operated Port Solenoid Valve VXP//3 Series pplicable Fluids Check List ormally Closed (.C.) Refer to page 33 for specifications and models. Option Symbol and Composition Option symbol Standard ote ) C E F ote ) K L P ote ) Q ote ) S T Seal material R PTFE R PTFE PTFE() PTFE() R Coil insulation type ody, Shading coil material C37 or CC8, Copper, Silver (ot available for VXP70/380/390) C37 or CC8, Copper on-lube type. For other options, -X at the end of product number represents the non-lube option. ote ) vailable option for VXP30. Fluid ame and Option Fluid (pplication) Option symbol and body material C37 or CC8 pplicable valve 0 to 0 to 5 Ethyl alcohol F, L, Ethylene glycol Caustic soda (5% ) as oil Silicone oil Fuel oil (up to C) Fuel oil (up to 00 C) system () S Q system (oiler water), system (Condensate) E P Insulation oil aphtha Parachloroethylene rake oil Water (up to 99 C), E, P lf using for other fluids, please contact SMC. 0 to 5 are C37 and 3 to are CC8. ormally Open (.O.) Refer to page for specifications and models. Option Symbol and Composition Option symbol Seal material ote ) Standard R C PTFE ote ) E F R K PTFE L P Q PTFE() S PTFE() T R X Coil insulation type ody, Shading coil material C37 or CC8, Copper, Silver (ot available for VXP7/38/39) C37 or CC8, Copper older material (in core assembly) POM POM POM on-lube type. For other options, -X at the end of product number represents the non-lube option. ote ) rease has been applied to the core part. Fluid ame and Option Fluid (pplication) Option symbol and body material C37 or CC8 pplicable valve 5 to 5 to 5 Caustic soda (5% ) as oil Silicone oil Fuel oil (up to C) Fuel oil (up to 00 C) system () S Q system (oiler water), system (Condensate) E P lnsulation oil Parachloroethylene rake oil Water (up to 99 C) E, P lf using for other fluids, please contact SMC. 5 to 5 are C37 and 3 to are CC8. 3

3 Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil ormally Closed (.C.) /Valve Specifications <ormally Closed> Orifice dia. (mmø) Thread Thread 4 Flange 3 Symbol Min. operating Maximum operating pressure differential ote ) (MPa) pressure differential Water ir Oil (MPa) C C C C VXP30-0 VXP30-03 VXP-03 VXP30-04 VXP-04 VXP-06 Orifice diameter (mmø) 5 VXP-0 VXP70- VXP380-4 VXP390-0 VXP70-3 VXP380- VXP Min. operating pressure differential (MPa) Fluid Standard specifications Option (S) Water (Standard) igh temperature water (, E) Turbine oil igh temperature oil () Refer to page 3 pplicable Fluids Check List for details of special fluids outside of the standard options and specifications Flow rate characteristics Water, Oil, ir Kv Cv converted C [dm 3 /(s bar)] b Cv Maximum operating pressure differential ote ) (MPa) Flow rate characteristics Water ir Oil Water, Oil, ir C C C C Kv Cv converted Effective area (mm ) Weight of grommet type. dd 0 g for conduit type, 30 g for I terminal type, g for conduit terminal type respectively. ote ) Refer to lossary of Terms on page 309 for detail of max. operating pressure differential and max. system pressure. VXP30: Option C, K, Q, S only. ote ) Max. system pressure (MPa) Water ir Oil.5 ote ) Max. system Weight pressure (MPa) (g) Water, ir, Oil Weight (g) VX VXK VX VXZ VXS VX VXE VXP VXR VX VXF VX3 VX Solenoid Specifications VXP VXP VXP3 Power source C C C Frequency pparent power (V) (z) Inrush olding 0 (3) 7 (8) Power consumption (W) (olding) Temperature rise ( C) (Rated voltage) ote) The return voltage is 0% or more of the rated voltage for C and % or more for. The allowable voltage fluctuation rate is ±0% of the rated voltage value for both C and. When the ambient temperature is 0 C ± 5 C and rated voltage is applied. For VXP30, changing coils from C to and vice versa is impossible, because of different core shapes. VXP 4 5 0, 6 7 0, are possible to exchange coil from C to, but impossible from to C. (um sound may generate because of no shading coil for.) ( ): VXP30 e sure to read Specific Product Precautions. Operating Fluid and mbient Temperature Temperature conditions Maximum Minimum Power source C C Water (Standard) ir (Standard) 80 0 ew point: 0 C or less ote ) mm /s or less ote 3), E etc. in parentheses are option symbols. ote 4) VXP30: Option C, K, Q, S only. Operating fluid temperature ( C) Oil ote 3) igh temperature water igh temperature oil (Standard) (, E) () ote ) ote 3) (S) 83 ote 3) mbient temperature ( C) 0 33

4 VXP//3 Series ow to Order (ormally Closed) VXP VXP VXP3 Solenoid valve option il Standard Specifications ody size Table() Size and pplicable 0 Valve/ody ormally closed/single unit Select an option mark in page 3 by "pplicable Fluids Check List" for special fluids outside of the standard. VXP30: Option C, K, Q, S only Thread For 3 Flange For For Refer to the table () given below for availability. Thread Flange pplicable model VXP30-0 VXP30-03, VXP-03 VXP30-04, VXP-04 VXP-06 VXP-0 VXP70- VXP380-4 VXP390-0 VXP70-3 VXP380- VXP390- Ordering example (Example) VXP series, Rc /4, 00 VC rommet (Part no.) VXP Size Thread type il T F Rc PTF PT racket il one With bracket Thread connection sizes are available from 0 to 0. Electrical option il S L Z Refer to the table () given below for availability. C T Refer to the table () given below for availability. one With surge voltage suppressor With indicator light With light/surge voltage suppressor rommet Conduit I terminal Conduit terminal Rated voltage 00 VC / z 00 VC / z 3 0 VC / z 4 0 VC / z 5 4 V 6 V 7 VC / z 8 48 VC / z 9 Other (Please contact SMC separately.) Refer to the table () given below for availability. Refer to page 3 for ordering coil only. Table() Rated Voltage-Electrical Entry-Electrical Option Insulation type Electrical option (00 V) (00 V) 3 (0 V) C 4 (0 V) 7 ( V) 8 (48 V) 5 (4 V) 6 ( V) S ote) Class Class C, T, C T S L, Z S L, Z ote) Surge voltage suppressor is attached in the middle of lead wire. Made to Order Made to Order Specifications ased on IS C 090 Splashproof Specifications ( ) ased on IEC59IP-X4 VXP Port size - X36 I terminal or class coil not available.

5 Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil ormally Open (.O.) Fluid /Valve Specifications <ormally Open> Thread Flange Thread Flange 3 Symbol Orifice dia. (mmø) Orifice dia. (mmø) 5 VXP4-03 VXP4-04 VXP5-06 VXP6-0 VXP7- VXP38-4 VXP39-0 VXP7-3 VXP38- VXP39- Min. operating pressure differential (MPa) Standard specifications Option (S) Water (Standard) igh temperature water (, E) Turbine oil igh temperature oil () Refer to page 3 pplicable Fluids Check List for details of special fluids outside of the standard options and specifications. Max. operating pressure differential ote ) (MPa) Flow rate characteristics Water, ir Oil Water, Oil, ir C/ C/ C Kv Cv converted C [dm 3 /(s bar)] b Cv Min. operating Max. operating pressure differential ote ) (MPa) pressure differential Water, ir Oil (MPa) C/ C/ C Flow rate characteristics Water, Oil, ir Kv Cv converted Effective area (mm ) ote ) Max. system pressure (MPa) Weight of grommet type. dd 0 g for conduit type, 30 g for I terminal type, g for conduit terminal type respectively. ote ) Refer to lossary of Terms on page 309 for details of max. operating pressure differential and max. system pressure. Weight (g) Water, 0 ir, Oil ote ) Max. system pressure (MPa) Weight (g) Water, 7 ir, Oil VX VXK VX VXZ VXS VX VXE VXP VXR VX VXF VX3 VX Solenoid Specifications VXP VXP VXP3 Power source C C C Frequency pparent power (V) (z) Inrush olding Power consumption (W) (olding) Temperature rise ( C ) (Rated voltage) ote) They are values in an ambient temperature of 0 C ±5 C and application of rated voltage. Changing coils from C to and vice versa is impossible, because of different core shapes. Return voltage is 0% or more of the rated value at C power and 5% or more at the power. The allowable voltage fluctuation rate is ±0% of the rated voltage value for both C and. e sure to read Specific Product Precautions. Fluid and mbient Temperature Temperature conditions Power source Water (Standard) ir (Standard) Fluid temperature ( C ) ote 3) Oil igh temperature water (Standard) (X, E) ote 3) igh temperature oil () C Maximum C ote ) Minimum 0 5 ew point: 0 C or less ote ) mm /s or less ote 3), E etc. in parentheses are option symbols. (S) 83 ote 3) mbient temperature ( C ) 0

6 VXP//3 Series ow to Order (ormally Open) Solenoid valve option il Valve/ody ormally open/single unit Table () Size and pplicable Thread Flange Ordering example (Example) VXP series, 3 Flange, 00 VC, I terminal (Part no.) VXP7-3- Standard Specifications VXP VXP VXP3 ody size Select an option mark in page 3 by "pplicable Fluids Check List" for special fluids outside of the standard. 36 Size pplicable model VXP4-03 VXP4-04 VXP5-06 VXP6-0 VXP7- VXP38-4 VXP39-0 VXP7-3 VXP38- VXP39- Thread Flange For 3 For For Refer to the table () given below for availability. il T F racket il one With bracket Thread connection sizes are available from 03 to 0. Electrical option il S L Z one With surge voltage suppressor With indicator light With light/surge voltage suppressor Refer to the table () given below for availability. rommet C Conduit I terminal T Conduit terminal Refer to the table () given below for availability. Rated voltage Thread type 00 VC / z 00 VC / z 0 VC / z 0 VC / z 4 V V VC / z 48 VC / z Other (Please contact SMC separately.) Refer to the table () given below for availability. Rc PTF PT Refer to page 3 for ordering coil only. Table () Rated Voltage-Electrical Entry-Electrical Option Insulation type Electrical option (00 V) (00 V) 3 (0 V) C 4 (0 V) 7 ( V) 8 (48 V) 5 (4 V) 6 ( V) S ote) Class Class C, T, C T S L, Z S L, Z ote) Surge voltage suppressor is attached in the middle of lead wire. Made to Order Made to Order Specifications ased on IS C 090 Splashproof Specifications ( ased on IEC59IP-X4 ) VXP Port size - X36 I terminal or class coil not available.

7 Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil Construction/Principle Parts Material ormally Closed (.C.) VXP30 VXP// VXP70/380/390 ormally Open (.O.) VXP4/5/6 VXP7/38/39 VX VXK VX VXZ VXS VX VXE VXP VXR VX VXF VX3 VX Operation <Valve opened> When the coil o is energized, the armature assembly u is attracted into the core of the core assembly y and the pilot valve opens. Then the pressure in the pressure action chamber falls to open the main valve C. <Valve closed> When the coil o is not energized, the pilot valve is closed and the pressure in the pressure action chamber rises and the main valve C closes. Operation <Valve closed> When the coil u is energized, the opened pilot closes, the pressure in pressure action chamber rises and the main valve C closes. <Valve opened> When coil u is not energized, the closed pilot valve opens, the pressure in pressure action chamber drops and the main valve C opens. o escription ody onnet 3 O-ring isk assembly 5 Valve spring 6 Core assembly rmature assembly Return spring Coil assembly Size 0 to 5 3 to 0 to 5 3 to 0 to 5 3 to 0 to 5 3 to Standard C37 CC8 C37 CC8 R, C37, R, Copper, R Class molded Material Option /,,, C37 /, Silver,, Class molded o escription ody onnet 3 O-ring isk assembly Valve spring Size 5 to 5 3 to 5 to 5 3 to 5 to 5 3 to 5 to 5 Core assembly 3 to Coil assembly Standard C37 CC8 C37 CC8 R, C37, R, Copper, R POM PTFE Class molded Material Option /,,, C37 /, Silver /, PTFE, Copper, /, PTFE Class molded 37

8 VXP//3 Series imensions (Orifice iameter: 0 mmø) ormally Closed: VXP30 rommet: Conduit: C (67) (5) ±0 (67) (5) ±0 / (5.5) (7.5) (7) (.3) (33) 36 racket (7.5) (5.5) (7) 30 (33) (.3) OUT 4 6 I 4 x Rc /4, 3/8, / 8 (8) racket OUT 4 6 I x Rc /4, 3/8, / 4 (8) 8 I terminal: Cable ø6 to ø (5.5) OUT (7.5) (7) 30 racket 4 6 (5) (67) I exagon width across flats 34.5 (44) / x Rc /4, 3/8, / (8) 8 (.3) (33) 36 Conduit terminal: T 9 ± (5.5) (7) 30 OUT (7.5) I / (7) (.3) (33) 36 racket 4 6 (5) (67) 59 ± x Rc /4, 3/8, / (8) 8 : Port size Rc / 38

9 Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil imensions (Orifice iameter: 5 mmø, 0 mmø, 5 mmø) ormally closed: VXP// ormally open: VXP4/5/6 rommet: Conduit: C Conduit terminal: T ( x ø8.5) Mounting hole x P Port size VX VXK VX VXZ VXS VX VXE VXP VXR VX VXF VX3 VX P Port size ormally closed ormally open Rc VXP VXP4 3 8, 63 VXP VXP VXP VXP6 90 ( ):.O. 04 (6) 8 (36) 33 () C E 8 F K L M rommet Conduit Conduit terminal Q Q R 69 (76) 77 (84) 87 (97) Q (68) 69 (76) 79 (89) a b racket c d e f

10 VXP//3 Series imensions ormally closed: VXP70/380/390 ormally open: VXP7/38/39 rommet: x P Port size Conduit: C I terminal: Cable ø6 to ø Conduit terminal: T P pplicable thread ormally closed ormally open Pc VXP70 VXP7 4 VXP380 VXP38 VXP390 VXP39 ( ):.O (45) 44 (59) (75) C E F K L rommet Conduit I terminal Conduit terminal M M M Q M Q 9 (0) (94 ) (94) (94) (3) 8 95 (05) (05 ) 6 95(05) (4) 8 06 (7 ) (7) 6 06 (7)

11 Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil imensions ormally closed: VXP70/380/390 ormally open: VXP7/38/39 rommet: Conduit: C I terminal: Cable ø6 to ø 8 x ø8 VX VXK VX VXZ VXS VX VXE VXP VXR VX VXF VX3 VX Conduit terminal: T ormally closed ormally open VXP70 VXP7 VXP380 VXP38 VXP390 VXP39 ( ):.O. pplicable flange C E F (86.5) (99) (7.5) K L 4 4 rommet M 9 (0) 03 (3) 4 (4) Conduit I terminal Conduit terminal M M Q M Q 84 (94) (05) (94) 95 (05) (94) 95 (05) (7) (7) 6 06 (7)

12 VXP//3 Series Solenoid Coil ssembly ow to Order Solenoid Coil ssemblies VX0 00 C 0 VX solenoid coil assembly Size part number 00 o. solenoid 00 o. solenoid 003 o.3 solenoid pplication pplicable series VXP series VXP series VXP3 series rommet C Conduit I terminal Electrical option il S L Z one With surge voltage suppressor With indicator light With light/surge voltage suppressor Terminal box il one T With terminal box Coil insulation type Class insulation Class insulation I terminal or not available Ordering example (Example) VXP series, 00 VC, class insulation, grommet (Part no.) VX (Example) VXP series, 0 VC, class insulation, I terminal (with terminal box) (Part no.) VX0-00T-04 (Example) VXP3 series, 4 V, conduit terminal, with light/surge voltage suppressor (Part no.) VX0-003CTZ-05 Rated voltage ote) 0 00 VC / z 0 00 VC / z VC / z 0 VC / z 4 V V VC / z 48 VC / z 4 VC / z 4 VC / z 6 V 48 V 00 V 0 V ote) Voltage symbols 0 to 08 are the same as the solenoid valve model identification symbols if the leading zero is removed. Coil Combination Table ( - Coil insulation type - Electrical option) Without electrical option With surge voltage suppressor With electrical option With indicator light With light/surge voltage suppressor S rommet C C Conduit CT CTS CTL CTZ CT CTS CTL CTZ I terminal T TS TL TZ pplicable voltages for with indicator light or with light/surge voltage suppressor are 00 VC, 00 VC, 0 VC, 0 VC and 4 V. pplicable voltages for CTL or CTZ are 00 VC, 00 VC, 0 VC and 0 VC. 3