Low Profile Slide Table Series MXF ø8, ø12, ø16, ø20

Size: px

Start display at page:

Download "Low Profile Slide Table Series MXF ø8, ø12, ø16, ø20"

Aileen Lester
5 years ago
Views:

1 Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with cover realizes neat appearance. Standard stroke adjustment Stroke can be adjusted at each stroke end within mm each end and mm is total. Body mounting (Body tapped) Low-profile and compactness have been achieved with the construction of guide and cylinder aligned in parallel. XF XF1 XF eight x idth eight comparison to XS 1 x 1. x 1 x 7 x 9 uto switch is mountable uto switch is recessed in the groove to save space. Slim body Low-profile has been achieved with the construction of guide and cylinder aligned in parallel. X XU XS XQ XF X X XP XY TS Reproducibility for mounting and dismounting Positioning pin holes on table top allows precise and easy mounting to change workpiece. Stronger thread for mounting work Insert thread for mounting work. igh rigidity Cross roller guide allows smooth operation without vibration. Optional porting Lateral and axial piping from directions is possible. Reproducibility for mounting and dismounting Pin holes for positioning on bottom of slide allows precise and accurate mounting of actuator. Body mounting (Body tapped) ounting can be done from directions top side (through-hole) and bottom side (body tapped). 1. Body tapped. Body through-hole Series Variations XF XF1 XF Bore size 1 Stroke uto switch Reed auto switch D-9, D-9 V Solid state auto switch D-9, D-9 V -color indication solid state auto switch D-9, D-9 V D- Individual Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: ()

2 Series XF Selection Selection Step Formula/Data Selection Example 1 Operating Conditions Enumerate the operating conditions considering the mounting position and workpiece configuration. Kinetic Energy Find the kinetic energy E () of the load. Find the allowable kinetic energy Ea (). Confirm that the kinetic energy of the load does not exceed the allowable kinetic energy. to be used Type of cushion orkpiece mounting position ounting orientation verage speed Va (mm/s) Load mass (kg): Fig. (1) Overhang Ln : Fig. () 1 V E = - (-) Collision speed V = 1. Va ) Correction factor (Reference values) Ea = K Emax orkpiece mounting coefficient K: Fig. () ax. allowable kinetic energy Emax: Table (1) Kinetic energy (E) llowable kinetic energy (Ea) L1 L L+ Cylinder: XF- Cushion: Rubber bumper orkpiece table mounting ounting: orizontal wall mounting verage speed: Va = [mm/s] llowable load: =. [kg] L1 = mm L = mm L = mm Load Factor -1 Load factor of load mass - Load factor of the static moment Yawing Rolling - Load factor of dynamic moment Pitching Yawing - Sum of the load factors Use is possible if the sum of the load factors does not exceed 1. 1 Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () -9-

3 Low Profile Slide Table Series XF Fig. (1) Load mass: (kg) ote) o need to consider this load factor in the case of using perpendicularly in a vertical position. Fig. () orkpiece ounting Coefficient: K Table mounting K = 1 End plate mounting K =. Fig. () Overhang: Ln, Correction Values for oment Center Distance: n Dynamic moment Static moment p p XF XF1 XF L Pitch moment Yaw moment Roll moment L1 L1 ep 1 y y ote) Static moment: oment generated by gravity Dynamic moment: oment generated by impact when colliding with stopper Table (1) aximum llowable Kinetic Energy: Emax () llowable kinetic energy Rubber bumper L L L ey r r L L X XU XS XQ XF X X XP XY TS Table () aximum llowable Load mass: max (kg) XF XF1 XF aximum allowable load mass. 1 Table () oment Center Position Distance Compensation mount: n oment center position distance compensation amount (Refer to Fig. ().) XF XF1 XF 1 ote) ote) ote) 1 mm for - only.. 7 verage speed Va (mm/s) 1..7 Table () aximum llowable oment: max ( m) XF XF1 XF Symbol. Symbol.7 1. n (n = 1 to ) E Ea Emax Ln (n = 1 to ) (p, y, r) a (ap, ay, ar) e (ep, ey) ea (eap, eay) max (pmax, ymax, rmax) V Stroke Definition Correction values of moment center position distance Kinetic energy llowable kinetic energy ax. allowable kinetic energy Overhang Static moment (pitch, yaw, roll) llowable static moment (pitch, yaw, roll) Dynamic moment (pitch, yaw) llowable dynamic moment (pitch, yaw) aximum allowable moment (pitch, yaw, roll) Collision speed Unit mm mm m m m m m mm/s Symbol Va a e max verage speed Va (mm/s) Collision speed V (mm/s) ote) Use the average speed when calculating static moment. Use the collision speed when calculating dynamic moment. Definition verage speed Load mass llowable load mass ass equivalent to impact ax. allowable load mass Load factor llowable load mass coefficient llowable moment coefficient Damper coeficient orkpiece mounting coefficient Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () -9- Unit mm/s kg kg kg kg 1 D- Individual

4 Low Profile Slide Table Series XF ow to Order Low Profile Slide Table XF 9B ø ø ø1 ø Bore size/ Stroke,,,,,,,,, ade to Order Refer to page 17 for details. umber of auto switches il S n pcs. 1 pc. n pcs. uto switch il ithout auto switch (Built-in magnet) For the applicable auto switch model, refer to the table below. ow to Order Stroke djusting Bolt (ccessory) XF 1 7 X11 1 pplicable bore size ø ø ø1 ø djustment range Standard il X11 X mm 1 mm mm Option -X (adjustable range mm) is not available in Series /XF. pplicable uto Switch/Refer to pages 1719 to 17 for the detailed specifications of auto switches. Type Solid state switch Reed switch Special function Diagnostic indication (-color indication) Electrical entry rommet rommet Indicator light Yes Yes o iring (Output) -wire (P) -wire (PP) -wire -wire (P) -wire (PP) -wire -wire (P equivalent) -wire V V Load voltage uto switch model Lead wire length (m). 1 Pre-wired DC C Perpendicular In-line connector (il) () (L) () V, V V V, V V V V 9V 9PV 9BV 9V 9PV 9BV 9V 9V 9V 9 9P 9B 9 9P 9B Lead wire length symbols:. m il (Example) 9 Solid state auto switches marked with are produced upon receipt of order. 1 m (Example) 9 m L (Example) 9L m (Example) 9 Since there are other applicable auto switches than listed, refer to page 1 for details. For details about auto switches with pre-wired connector, refer to pages 17 and 1. uto switches are shipped together (not assembled). V V or less pplicable load IC circuit IC circuit IC circuit IC circuit Relay, PLC Relay, PLC 1 Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () -9-

5 Low Profile Slide Table Series XF Specifications Bore size Piping port size Fluid ction Operating pressure Proof pressure mbient and fluid temperature Piston speed Cushion Lubrication uto switch (Option) Stroke length tolerance Stroke adjustment range 1 x. x. ir Double acting.1 to.7 Pa 1. Pa to to mm/s Rubber bumper on both sides on-lube Reed auto switch Solid state auto switch (-wire, -wire) -color indication solid state auto switch (-wire, -wire) +1 mm Extension end mm/retraction end mm X XU XS XQ XF X Theoretical Output OUT I () X Bore size Rod size Operating direction OUT I OUT I Piston area (mm ) Operating pressure (Pa) XP XY TS ade to Order Specifications (For details, refer to pages 19 to 1.) 1 OUT I OUT I Symbol Specifications ote) Theoretical output () = Pressure (Pa) x Piston area (mm) -X7 -X9 -X11 -X -X9 -X -X PTFE grease rease for food djusting bolt, long specification (djustment range: 1 mm) ithout built-in auto switch magnet Fluororubber seal nti-corrosive specifications for guide unit EPD seal Standard Stroke XF XF1 XF Standard stroke,,,,,,7,,, ass (g) Standard stroke XF XF1 9 XF 17 D- Individual Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: ()

6 Series XF Table Deflection (Reference Values) Table displacement due to pitch moment load Table displacement when loads are applied to the section marked with the arrow at the full stroke. Table displacement due to yaw moment load Table displacement when loads are applied to the section marked with the arrow at the full stroke. Table displacement due to roll moment load Table displacement of section when loads are applied to the section F with the slide table retracted. F Lr.. -. Lr = mm XF. XF-.. Lr = mm.... XF- XF-... XF- XF- XF-.. XF- XF- XF- 1 Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () -9-

7 Low Profile Slide Table Series XF The graphs below show the table displacement when the static moment load is applied to the table. The graphs do not show the loadable mass. Refer to the Selection for the loadable mass. Table displacement due to pitch moment load Table displacement when loads are applied to the section marked with the arrow at the full stroke. Table displacement due to yaw moment load Table displacement when loads are applied to the section marked with the arrow at the full stroke. Table displacement due to roll moment load Table displacement of section when loads are applied to the section F with the slide table retracted. F Lr X XF1. XF1-.1. XF1-. XF1-. XF XF1- XF1- XF1- Lr = mm.7.. XF1- XF1- XF Lr = mm. XU XS XQ XF X X XP XY TS XF- XF- XF- XF-.... XF- XF- XF- XF-.. XF- XF- XF- XF D- Individual Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: ()

8 Series XF Construction! t!!! r w e! o i!!9!1 y! u!7 q Component Parts o Description aterial ote Body Table End plate Rail uide Rod Piston assembly Seal support ead cap Floating bushing Orifice Roller stopper Cylindrical roller Roller spacer Rod bumper luminum alloy luminum alloy luminum alloy Carbon tool steel Carbon tool steel Stainless steel Brass Resin Stainless steel Brass Stainless steel igh carbon chrome bearing steel Resin Polyurethane ard anodized ard anodized ard anodized eat treated eat treated ith magnet Electroless nickel plated Electroless nickel plated Component Parts o Bore size 1 Description aterial ote djust bumper Piston seal Rod seal O-ring Replacement Parts: Seal Kit Kit no. -PS XF-PS XF1-PS XF-PS Polyurethane BR BR BR Set of nos. above!7 to!9 Seal kit includes!7,!,!9. Order the seal kit, based on each bore size. Replacement Part: rease Pack pplied part uide Cylinder Contents rease pack part no. R-S- ( g) R-S- ( g) R-S- ( g) R-S- ( g) R-L- ( g) R-L- ( g) R-L- ( g) R-L- ( g) Dimensions: Stroke djusting Bolt 1 C B pplicable size XF XF1 XF XF-7 XF-7-X11 XF-7 XF-7-X11 XF-7 XF-7-X11 XF-7-X XF-7 XF-7-X11 XF-7-X Stroke adjustable range B C Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () x.7 x. x 1 x 1

9 Low Profile Slide Table Series XF Dimensions: Stroke adjuster at extension end Stroke adjuster at retraction end ø9 +. depth 19 F (Equal pitch) ( 1) x F x x. thread depth. (Insert) idth across hexagon socket hole idth across flats ote) Blanking plug (-P points) Possible to use as operating port x x..7 X XU XS XQ depth 1. 1 x ø. x ø. XF X X XP x x. thread depth. (Table length). Operating port x x Section ( 1): The number of pitches x x ax depth 1 XY TS ote) If long bolts are used, they can touch the guide block and cause malfunction, etc. Refer to the Specific Product Precautions. +. ø9 depth F D- Individual Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: ()

10 Series XF Dimensions: XF Stroke adjuster at extension end Stroke adjuster at retraction end idth across hexagon socket hole.. ø9 +. depth. ( 1) x x x. thread depth. (Insert) idth across flats 7 ote) Blanking plug (-P points) Possible to use as operating port x x x x.7 (Table length) depth. x ø. x ø. x x. thread depth. Operating port x x. Section ( 1): The number of pitches I ax.. ote) If long bolts are used, they can touch the guide block and cause malfunction, etc. Refer to the Specific Product Precautions depth +. ø9 depth XF- XF- XF- I Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () -9-

11 Low Profile Slide Table Series XF Dimensions: XF1 Stroke adjuster at extension end Stroke adjuster at retraction end idth across hexagon socket hole 9 ø9 +. depth ( 1) x x x.7 thread depth. (Insert) idth across flats ote) Blanking plug (-P points) Possible to use as operating port x x..7 X XU XS depth x ø x ø. XQ XF X X XP x x.7 thread depth ( 1) x x x. (Table length) Section XY TS Operating port x x. ( 1): The number of pitches 1 I ax. 9 ote) If long bolts are used, they can touch the guide block and cause malfunction, etc. Refer to the Specific Product Precautions depth ø9 +. depth XF1- XF1- XF I D- Individual Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: ()

12 Series XF Dimensions: XF Stroke adjuster at extension end Stroke adjuster at retraction end idth across hexagon socket hole ø9 +. depth ( 1) x idth across flats x x. thread depth 9. (Insert) ote) Blanking plug (-P points) Possible to use as operating port x x (Table length) depth 7 1. x ø x ø. x x. thread depth ( 1) x x x. Section Operating port x x. ( 1): The number of pitches ax. 9. ote) If long bolts are used, they can touch the guide block and cause malfunction, etc. Refer to the Specific Product Precautions depth ø9 +. depth XF- XF- XF- XF Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () -9-

13 Low Profile Slide Table Series XF uto Switch Proper ounting Position (Detection at Stroke End) Reed uto Switch: D-9, D-9, D-9, D-9V, D-9V, D-9V XF XF1 XF B Stroke (.) (.) 11.1 (.) E Stroke (.) 11.1 (.) 1. (11.) 1.7 (1.) 7.1 (.). (1.).7 (1.). (.). (1.7).7 (.) X XU E Solid State uto Switch: D-9B, D-9, D-9P, D-9B, D-9, D-9P B Stroke 1 1 E Stroke XS XQ XF XF XF1 XF X X B Solid State uto Switch: D-9BV, D-9V, D-9PV, D-9BV, D-9V, D-9PV B Stroke 1 1 E Stroke XP XY TS XF XF XF ( ): Denotes the values of D-9. ote) djust the auto switch after confirming the operating conditions in the actual setting. uto Switch ounting Operating Range Caution uto Switch ounting Tool hen adjusting the auto switch mounting screw (included with auto switch), use a watchmaker s screwdriver with a handle about to mm in diameter. Tightening Torque Tightening Torque of uto Switch ounting Screw ( m) uto switch model Tightening torque D-9 (V). to. D-9 (V). to.1 D-9 (V) uto switch model D-9 (V) D-9, 9 V D-9, 9 V pplicable bore size. 1 7 Since the operating range is provided as a guideline including hysteresis, it cannot be guaranteed (assuming approximately ± dispersion). It may vary substantially depending on an ambient environment.. uto switch mounting screw (included with auto switch) atchmaker s screwdriver uto switch Other than the models listed in ow to Order, the following auto switches are applicable. ormally closed (C = b contact) solid state auto switches (D-F9/F9 types) and solid state auto switch D-F are also available. For details, refer to pages 1 and 17. D- Individual Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: ()

14 Series XF Specific Product Precautions Be sure to read before handling. Refer to front matters and for Safety Instructions and pages to 11 for ctuator and uto Switch Precautions. ounting Caution 1. Do not scratch or dent the mounting side of the body, table or end plate. It causes play in the guide section and increases sliding resistance.. Do not scratch or dent on the forward side of the rail or guide. It will result in looseness of the guide section and increased sliding resistance.. Keep away from objects which are influenced by magnets. s the piston part has magnets built-in, do not allow close contact with magnetic disks, magnetic cards or magnetic tapes. Data may be erased.. hen mounting the body, use screws with appropriate length and do not exceed the maximum tightening torque. Tightening with a torque above the limit could malfunction. hereas tightening insufficiently could result in misalignment or come to a drop.. Be careful when adjusting stroke not to allow cylinder end plate to bottom out against cylinder body. Positioning Caution 1. The positioning hole on the table and on the bottom of the body does not have the same center. Positioning hole is meant to be for reproducibility for mounting and dismounting. ounting of Body The slide table can be mounted from directions. Select the best direction according to your application. 1. Body Tapped. Body Through-hole XF XF1 XF Caution L L Bolt aximum tightening torque aximum screw-in ( m) depth L x.7 x.7 x. x ounting of orkpiece ork can be mounted on two sides of the body. XF XF1 XF L Bolt aximum tightening torque aximum screw-in ( m) depth L x. x. x.7 x mm or less of flatness is recommended for the body mounting surface. n uneven mounting surface of a workpiece or a base may cause vibration or increase sliding resistance. 1. Front ounting. Top ounting Fixing bolt for guide Selection Caution 1. If intermediate stop by external stopper is done, avoid ejection. If ejection occurs, it may cause damage. In the case the slide table is stopped at an intermediate position by an external stopper then forwarded to the front, return the slide table to the back for just a moment to retract the stopper, then supply pressure to the opposite port to operate slide table.. Do not use it in such a way that excessive external force or impact force could work on it. This could result in damage. XF XF1 XF Bolt aximum tightening torque aximum screw-in ( m) depth L Bolt x. x. x.7 x XF XF1 XF x. x. x.7 x L aximum tightening torque aximum screw-in ( m) depth L Caution To prevent the workpiece holding bolts from touching the guide holding bolts, use bolts that are. mm or more shorter than the maximum screw-in depth. If the bolts are too long, they hit the end plate and may cause malfunctions. 1 Courtesy of Steven Engineering, Inc.- Ryan ay, South San Francisco, C 9-7-ain Office: () -9-Outside Local rea: () -9-

Low Profile Slide Table. Series MXF. ø8, ø12, ø16, ø20. Body mounting(body tapped)

Low Profile Slide Table. Series MXF. ø8, ø12, ø16, ø20. Body mounting(body tapped) Low Profile Slide Table Series XF ø, ø, ø1, ø Slim and compact style air slide table has parallel design for guide and cylinder. Standard stroke adjustment can be adjusted at each stroke end within mm