Applicable Tubing. Tubing material Tubing outside O.D. Series KQ2 Series KQ

Size: px
Start display at page:

Download "Applicable Tubing. Tubing material Tubing outside O.D. Series KQ2 Series KQ"

Transcription

1 tuing dimeter: Metric Size : M, R, Rc KQ2/White ody Tuing Tuing mteril Tuing outside O.D. Nylon, Soft Nylon, Polyurethne ø, ø, ø, ø, ø, ø, ø1 Color Series Series KQ2 Series KQ Body White Blck Relese utton Light grey Blue KQ/Blck ody Specifictions Fluid Mx. operting pressure Operting vcuum pressure Proof pressure Amient nd fluid temperture Thred Mounting Nut Air, Wter Note 1) 1.0MP 0kP 3.0MP 5 to 0 C, In cse of wter: 0 to 0 C (With no condenstion) JIS B0203 (Tper for piping) JIS B0209, Clss 2 (Metric corse ) JIS B0211, Clss 2 (Metric fine ) Selnt (Thred portion) With / Without selnt Note 1) to generl industril wter. Consult SMC if using for other fluids. Surge pressure must e under the mximum operting pressure. Series KQ2: White ody Series KQ : Blck ody Guide Collet Chuck to nylon nd polyurethne Lrge retining force Secure enggement with chuck nd lrge retining force with collet. Relese utton Series KQ2: Light grey Series KQ : Blue Requires little force for removl Releses the chuck collet to remove the tue s well s to prevent the chuck from iting too deeply into the tuing. Pcking Comptile with wide rnge of pressure, from low vcuum to 1.0 MP. The specil shpe ensures seling nd reduces resistnce in tuing insertion. Thred M, R, Rc Body O-ring Stud Tuing Effective for piping in confined spce The ody nd portion cn e rotted. (For positioning) PAT. Refer to Best Pneumtics No. for the inch size. 1

2 One-touch Fitting Tuing KQ2H Mle connector KQ2S Hexgon socket hed mle connector KQ2L Femle hole P.3 P.3 Tuing KQ2H Stright union KQ2E Bulkhed union KQ2L Union KQ2LE P. P. P. KQ2T Different di. tee KQ2U Different di. union "Y" KQ2UD Different di. doule union "Y" KQ2LU Tuing Tuing KQ2F Femle connector KQ2E Bulkhed connector KQ2LF Femle P.11 P.11 P.11 KQ2VF Universl femle KQ2ZF Brnch universl femle Mle P.11 P.11 KQ2 /KQ Mle KQ2K 5 Mle KQ2W P.3 KQ2VT Triple universl mle KQ2LU P.3 P.5 Bulkhed mle KQ2T Union tee KQ2U Union "Y" P. P. Brnch union KQ2D Delt union KQ2TW Cross KQ2P Plug KQ2N Nipple Accessories P. KQ2N Adpter KQ2C Tue cp P. Extended mle KQ2V Universl mle KQ2VS Hexgon socket hed universl mle KQ2T Mle rnch tee KQ2Y Mle run tee KQ2U Union "Y" P. P. P. P. P.5 Brnch union KQ2Z Brnch universl mle KQ2ZD Doule rnch universl mle KQ2ZT Triple rnch universl mle KQ2UD Delt rnch KQ2D Delt union P. P. P. P. P.7 KQ2H Tuing P. Different di. stright KQ2T Different di. tee KQ2L Plug-in KQ2W Extended plug-in KQ2R Plug-in reducer P. P. P. KQ2TX Different di. cross KQ2TY Different di. cross KQ2U Plug-in "Y" KQ2X Different di. plug-in "Y" KQ2XD Doule plug-in "Y" One-touch fittings P. P. P. KQ2N Different di. nipple P. KQ2C Collr cp P. P. KQ2VD Doule universl mle P.5 P.5 P.7 KQ2L Reducer P. P. P. 2

3 Tuing Femle hole Mle Connector Most coon style used to pipe from femle in the sme direction. <M5, M> 1 M5 X 0. R1/ M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQ2H/KQH Relese Button, Relese Button KQ2H( Light grey ) KQH( Blue ) KQ2H23-M5 KQH23-M5 KQ2H0-M5 KQH0-M5 -M -M KQ2H0-M5 KQH0-M5 -M -M KQ2H0 KQH0 KQ2H KQH -0S -0S KQ2H KQH -0S -0S KQ2H1 KQH1-0S -0S Mle Elow Most coon style used to pipe from femle t right ngle. <M> KQ2L/KQL KQ2L (White) KQL (Blck) M5 X 0. R1/ M5 X 0. KQ2L23-M5 KQ2L0-M5 KQL23-M5 KQL0-M5 M X 1 -M -M R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQ2L0-M5 -M KQ2L0 KQ2L KQL0-M5 -M KQL0 KQL -0S KQ2L -0S -0S KQL -0S 1 KQ2L1 KQL1-0S -0S Hexgon Socket Hed Mle Connector The hexgon socket in the ody is used to tighten the socket hed mle connector with hexgon wrench. Useful in confined spce. <M5, M> 1 M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQ2S/KQS Relese Button, Relese Button KQ2S( Light grey ) KQS( Blue ) KQ2S0-M5 KQS0-M5 -M -M KQ2S0-M5 KQS0-M5 -M -M KQ2S0 KQS0 KQ2S KQS -0S -0S KQ2S KQS -0S -0S KQ2S1 KQS1-0S -0S 5 Mle Elow For piping t 5 from femle. Intermedite model etween mle connector nd mle. <M5, M> 1 M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQ2K/KQK KQ2K (White) KQK (Blck) KQ2K0-M5 KQK0-M5 -M -M KQ2K0-M5 KQK0-M5 -M -M KQ2K0 KQK0 KQ2K KQK -0S -0S KQ2K KQK -0S -0S KQ2K1 KQK1-0S -0S 3

4 Tuing Femle hole Extended Mle Elow Bsiclly used in the sme wy s mle. But lso used in 3 dimensionl piping to prevent interference of fittings. 1 Universl Mle Elow M5 X 0. R1/ M5 X 0. M5 X 0. M5 X 0. R1/ KQ2W/KQW KQ2W (White) KQW (Blck) KQ2W23-M5 KQW23-M5 KQ2W0-M5 KQ2W0-M5 KQ2W0 KQ2W -0S KQ2W -0S KQ2W1-0S KQW0-M5 KQW0-M5 KQW0 KQW -0S KQW -0S KQW1-0S KQ2V/KQV The hexgon hed of the ody is used to tighten the ody with ox wrench in confined spce. 1 R1/ R1/ R1/ M5 X 0. R1/ R1/ KQ2V (White) KQV (Blck) KQ2V0-M5 KQV0-M5 KQ2V0-M5 KQV0-M5 KQ2V0 KQV0 KQ2V KQV KQ2V KQV -0S -0S KQ2V1 KQV1-0S -0S Hexgon Socket Hed Universl Mle Elow The hexgon socket in the hed is used to tighten the ody with hexgon wrench. Useful in confined spce. Mle Brnch Tee M5 X 0. M5 X 0. KQ2VS/KQVS KQ2VS (White) KQVS (Blck) KQ2VS0-M5 KQVS0-M5 KQ2VS0-M5 KQVS0-M5 KQ2VS0 KQVS0 KQ2VS KQVS KQ2VS KQVS -0S -0S KQ2T/KQT To rnch the line from the femle t 90 in ech direction. <M> KQ2T (White) KQT (Blck) M5 X 0. KQ2T23-M5 KQT23-M5 R1/ 1 R1/ R1/ R1/ M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQ2T0-M5 -M KQ2T0-M5 -M KQ2T0 KQ2T -0S KQ2T -0S KQ2T1-0S KQT0-M5 -M KQT0-M5 -M KQT0 KQT -0S KQT -0S KQT1-0S KQ2 /KQ

5 Tuing Femle hole Mle Run Tee KQ2Y/KQY To rnch the line from the femle in the sme direction nd t 90. Union "Y" To rnch tuing in the sme direction. KQ2U/KQU <M5, M> 1 M5 X 0. R1/ M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQ2Y (White) KQY (Blck) KQ2Y23-M5 KQY23-M5 KQ2Y0-M5 -M KQ2Y0-M5 -M KQ2Y0 KQ2Y -0S KQ2Y -0S KQ2Y1-0S KQY0-M5 -M KQY0-M5 -M KQY0 KQY -0S KQY -0S KQY1-0S <M5, M> KQ2U (White) KQU (Blck) M5 X 0. KQ2U23-M5 KQU23-M5 R1/ 1 M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ KQ2U0-M5 KQU0-M5 -M -M KQ2U0-M5 KQU0-M5 -M -M KQ2U0 KQU0 KQ2U KQU -0S -0S KQ2U KQU -0S -0S KQ2U1 KQU1-0S -0S Doule Universl Mle Elow KQ2VD/KQVD To rnch the line from the femle t right ngles. 2 individul prts rotte freely. R1/ R1/ R1/ KQ2VD (White) KQVD (Blck) KQ2VD0 KQVD0 KQ2VD0 KQVD0 KQ2VD0 KQVD0-0S -0S KQ2VD KQVD -0S -0S KQ2VD KQVD -0S -0S Triple Universl Mle Elow To rnch line from the femle into 3 directions t right ngles. 3 individul prts rotte freely. R1/ R1/ R1/ KQ2VT/KQVT KQ2VT (White) KQVT (Blck) KQ2VT0 KQVT0 KQ2VT0 KQVT0 KQ2VT0 KQVT0-0S -0S KQ2VT KQVT -0S -0S KQ2VT KQVT -0S -0S 5

6 Tuing Femle hole Brnch Union Elow To rnch tuing t right ngle from the femle. <M5, M> M5 X 0. M X 1 M5 X 0. M X 1 Brnch Universl Mle Elow KQ2LU (White) KQLU (Blck) KQ2LU0-M5 KQLU0-M5 -M -M KQ2LU0-M5 KQLU0-M5 -M -M KQ2LU0 KQLU0 KQ2LU KQLU -0S -0S KQ2LU KQLU -0S -0S The hexgon hed of the ody is used to tighten the ody with ox wrench. Used to rnch the line. Elow union for piping. R1/ R1/ R1/ M5 X 0. R1/ R1/ R1/ KQ2LU/KQLU KQ2Z/KQZ KQ2Z (White) KQZ (Blck) KQ2Z0-M5 KQZ0-M5 KQ2Z0 KQZ0 KQ2Z0 KQZ0 KQ2Z KQZ KQ2Z KQZ -0S -0S Doule Brnch Universl Mle Elow KQ2ZD/KQZD To rnch the line from the femle into tues t right ngles. 2 individul prts rotte freely. R1/ R1/ R1/ Triple Brnch Universl Mle Elow KQ2ZD (White) KQZD (Blck) KQ2ZD0 KQ2ZD0 KQ2ZD0-0S KQ2ZD -0S KQ2ZD -0S KQZD0 KQZD0 KQZD0-0S KQZD -0S KQZD -0S KQ2ZT/KQZT To rnch the line from the femle into tues t right ngles. 3 individul prts rotte freely. KQ2ZT (White) KQZT (Blck) R1/ KQ2ZT0 KQZT0 R1/ KQ2ZT0 KQZT0 R1/ KQ2ZT0 KQZT0-0S -0S KQ2ZT KQZT -0S -0S KQ2ZT KQZT -0S -0S KQ2 /KQ

7 Tuing Femle hole Delt Brnch KQ2UD/KQUD To rnch the line from the femle into tues in the sme direction. KQ2UD (White) KQUD (Blck) R1/ KQ2UD0 KQUD0 R1/ KQ2UD0 KQUD0 Delt Union KQ2D/KQD To rnch the line from the femle into 2 directions t right ngles. <M5, M> KQ2D (White) KQD (Blck) M5 X 0. KQ2D0-M5 KQD0-M5 M X 1 -M -M R1/ M5 X 0. M X 1 R1/ R1/ KQ2D0-M5 -M KQ2D0 KQ2D -0S KQ2D -0S KQD0-M5 -M KQD0 KQD -0S KQD -0S 7

8 Tuing Tuing Stright Union To connect tuings in the sme direction. Bulkhed Union 1 To connect tuing through pnel. Union Elow 1 1 KQ2H/KQH KQ2H (White) KQH (Blck) KQ2H23-00 KQH23-00 KQ2H0-00 KQH0-00 KQ2H0-00 KQH0-00 KQ2H0-00 KQH0-00 KQ2H-00 KQH-00 KQ2H-00 KQH-00 KQ2H1-00 KQH1-00 KQ2E/KQE Relese utton, KQ2E( ) KQE( Relese utton Light grey Blue ) KQ2E23-00 KQE23-00 KQ2E0-00 KQE0-00 KQ2E0-00 KQE0-00 KQ2E0-00 KQE0-00 KQ2E-00 KQE-00 KQ2E-00 KQE-00 KQ2E1-00 KQE1-00 To connect tuing t right ngles to ech other. KQ2L/KQL KQ2L (White) KQ2L23-00 KQ2L0-00 KQ2L0-00 KQ2L0-00 KQ2L-00 KQ2L-00 KQ2L1-00 KQL (Blck) KQL23-00 KQL0-00 KQL0-00 KQL0-00 KQL-00 KQL-00 KQL1-00 Bulkhed Mle Elow KQ2LE/KQLE To connect tuings through pnel nd chnge the tuing entry y 90. Union Tee KQ2LE (White) KQLE (Blck) KQ2LE0-00 KQLE0-00 KQ2LE0-00 KQLE0-00 KQ2LE0-00 KQLE0-00 KQ2LE-00 KQLE-00 KQ2LE-00 KQLE-00 KQ2T/KQT To rnch tuing into 2 directions ech t 90 to the originl one. Union "Y" 1 To rnch tuing in the sme direction. 1 Different Di. Stright To connect tuings of different dimeters. KQ2T (White) KQT (Blck) KQ2T23-00 KQT23-00 KQ2T0-00 KQT0-00 KQ2T0-00 KQT0-00 KQ2T0-00 KQT0-00 KQ2T-00 KQT-00 KQ2T-00 KQT-00 KQ2T1-00 KQT1-00 KQ2U/KQU KQ2U (White) KQU (Blck) KQ2U23-00 KQU23-00 KQ2U0-00 KQU0-00 KQ2U0-00 KQU0-00 KQ2U0-00 KQU0-00 KQ2U-00 KQU-00 KQ2U-00 KQU-00 KQ2U1-00 KQU1-00 KQ2H/KQH KQ2 /KQ 1 KQ2H (White) KQH (Blck) KQ2H23-0 KQH23-0 KQ2H0-0 KQH0-0 KQ2H0-0 KQH0-0 KQ2H0- KQH0- KQ2H- KQH- KQ2H-1 KQH-1

9 Tuing Tuing Different Di. Tee KQ2T/KQT To rnch the tuing into two t right ngle nd reduce the resulting rnches in size. 2- Different Di. Tee 1 KQ2T (White) KQT (Blck) KQ2T23-0 KQT23-0 KQ2T0-0 KQT0-0 KQ2T0-0 KQT0-0 KQ2T0- KQT0- KQ2T- KQT- KQ2T-1 KQT-1 KQ2T To connect tuing in the sme direction s well s to rnch it into nother smller tuing t Different Di. Union "Y" KQ2T (White) KQ2T0-0 KQ2T0-0 KQ2T-0 KQ2T- KQ2U/KQU To rnch tuing into 2 smller tues in the sme direction s the originl one. 1 Different Di. Doule Union "Y" KQ2U (White) KQU (Blck) KQ2U23-0 KQU23-0 KQ2U0-0 KQU0-0 KQ2U0-0 KQU0-0 KQ2U0- KQU0- KQ2U- KQU- KQ2U-1 KQU-1 KQ2UD/KQUD To rnch tuing into smller tues in the sme direction s the originl one. - KQT (Blck) is mnufctured s mde to order. KQ2UD (White) KQUD (Blck) KQ2UD0-0 KQUD0-0 KQ2UD0-0 KQUD0-0 Brnch Union Elow To rnch tue t right ngle into two tues. Delt Union KQ2LU/KQLU KQ2LU (White) KQLU (Blck) KQ2LU0-00 KQLU0-00 KQ2LU0-00 KQLU0-00 KQ2LU0-00 KQLU0-00 KQ2LU-00 KQLU-00 KQ2LU-00 KQLU-00 KQ2D/KQD To connect 3 tues t right ngles with ech other. Cross To rnch tuing into directions. Different Di. Cross KQ2D (White) KQD (Blck) KQ2D0-00 KQD0-00 KQ2D0-00 KQD0-00 KQ2D0-00 KQD0-00 KQ2D-00 KQD-00 KQ2D-00 KQD-00 KQ2TW KQ2TW (White) KQ2TW0-00 KQ2TW0-00 KQ2TW0-00 KQ2TW-00 KQ2TW-00 KQ2TX To connect tues t right ngles with 2 smller tues on oth sides. Different Di. Cross KQ2TX (White) KQ2TX0-0 KQ2TX0- KQ2TX- KQ2TY This model is not ville with lck ody specifictions. This model is not ville with lck ody specifictions. To rnch tuing into smller tuing in 3 directions. KQ2TY (White) This model is KQ2TY0-0 not ville with lck ody KQ2TY0- specifictions. 3- KQ2TY- 9

10 Tuing One-touch fittings Plug-in Elow KQ2L/KQL To chnge the tuing direction from one-touch fitting y Extended Plug-in Elow Fitting size KQ2L (White) KQL (Blck) 1 KQ2L23-99 KQ2L0-99 KQ2L0-99 KQ2L0-99 KQ2L-99 KQ2L-99 KQ2L1-99 KQL23-99 KQL0-99 KQL0-99 KQL0-99 KQL-99 KQL-99 KQL1-99 KQ2W/KQW To chnge the tuing direction from one-touch fitting y 90. to 3 dimensionl piping when used with plug-in. Plug-in Reducer To connect to smller one-touch fitting. Fitting size KQ2W (White) KQW (Blck) KQ2W23-99 KQ2W0-99 KQ2W0-99 KQ2W0-99 KQ2W-99 KQ2W-99 KQW23-99 KQW0-99 KQW0-99 KQW0-99 KQW-99 KQW-99 KQ2R/KQR Fitting size KQ2R (White) KQR (Blck) KQ2R23-0 KQ2R KQ2R0-0 KQR23-0 KQR KQR KQ2R0- KQ2R- KQR0- KQR KQ2R-1 KQR-1 Reducer Elow KQ2L/KQL To chnge the tuing direction from one-touch fitting y 90 s well s to connect to tuing of smller dimeter. Plug-in "Y" Fitting size KQ2L (White) KQL (Blck) 1 KQ2L23-0 KQ2L KQ2L0-0 - KQ2L0- - KQ2L- KQ2L-1 KQL23-0 KQL KQL0-0 - KQL0- - KQL- KQL-1 KQ2U/KQU To rnch the line from one-touch fitting into tuing in the sme direction. Fitting size 1 1 Different Di. Plug-in "Y" KQ2U (White) KQU (Blck) KQ2U23-99 KQU23-99 KQ2U0-99 KQU0-99 KQ2U0-99 KQU0-99 KQ2U0-99 KQU0-99 KQ2U-99 KQU-99 KQ2U-99 KQU-99 KQ2U1-99 KQU1-99 KQ2X/KQX To rnch the line from one-touch fitting into tuing of smller dimeter in the sme direction. Fitting size Doule Brnch "Y" KQ2X (White) KQX (Blck) KQ2X0-0 KQX0-0 KQ2X0-0 KQX0-0 KQ2X0- KQX0- KQ2X- KQX- KQ2XD/KQXD To rnch the line from one-touch fitting into tues of smller dimeter in the sme direction. Fitting size KQ2XD (White) KQXD (Blck) KQ2XD0-0 KQXD0-0 KQ2XD0-0 KQXD0-0 KQ2 /KQ

11 Tuing Mle Femle Connector KQ2F/KQF To pipe from the mle ed portion of pressure guge, etc. 1 Rc1/ Rc1/ Rc1/ Rc1/ Rc3/ Rc1/ Rc1/ Rc3/ Rc1/ Rc3/ Rc1/ Rc3/ Rc1/2 Rc3/ Rc1/2 Bulkhed Femle Connector Relese utton, Relese utton KQ2F( Light grey ) KQF( Blue ) KQ2F0-01 KQF0-01 KQ2F0-01 KQF0-01 KQ2F0-01 KQF0-01 KQ2F-02 KQF-02 KQ2F-02 KQF KQ2F1-03 KQF KQ2E/KQE Used for trunk connection etween tuing nd mle instlled through pnel. Rc1/ Rc1/ Rc1/ Rc1/ Rc1/ Rc3/ Rc1/ Rc1/ Rc3/ Rc1/ Rc3/ Rc3/ Rc1/2 Rc3/ 1 Rc1/2 KQ2E( Relese utton, Relese utton Light grey ) KQE( Blue ) KQ2E23-02 KQE23-02 KQ2E0-01 KQE0-01 KQ2E0-01 KQE0-01 KQ2E0-01 KQE0-01 KQ2E-02 KQE-02 KQ2E-03 KQE KQ2E1-03 KQE Femle Elow To pipe from the mle ed t the right ngle. <M5, M> <Rc> M5 X 0. M X 1 Rc1/ Rc1/ M5 X 0. M X 1 Rc1/ Rc1/ Rc3/ Rc1/ Rc1/ Rc3/ Rc1/ Rc3/ Rc1/2 Rc1/ Rc3/ Rc1/2 Universl Femle Elow KQ2LF/KQLF KQ2LF (White) KQLF (Blck) KQ2LF0-M5 KQLF0-M5 -M -M KQ2LF0-M5 KQLF0-M5 -M -M KQ2LF0-01 KQLF0-01 KQ2LF-02 KQLF KQ2LF-02 KQLF KQ2VF/KQVF To connect line from mle nd femle in the sme direction s well s to rnch it into 2 pipes t right ngle. Multiplex connections possile. KQ2VF (White) KQVF (Blck) M5 X 0. KQ2VF0-M5 KQVF0-M5 R/Rc1/ M5 X 0. KQ2VF0-M5 KQVF0-M5 R/Rc1/ R/Rc1/ R/Rc1/ KQ2VF0 KQVF0 R/Rc1/ R/Rc3/ R/Rc1/ KQ2VF KQVF R/Rc3/ <R, Rc> R/Rc3/ KQ2VF KQVF R/Rc1/2-0S -0S Brnch Universl Femle Elow KQ2ZF/KQZF To rnch line from mle or femle in the sme direction nd t right ngle. Multiplex connections possile. 11 <R, Rc> M5 X 0. R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc3/ R/Rc3/ R/Rc1/2 KQ2ZF (White) KQZF (Blck) KQ2ZF0-M5 KQZF0-M5 KQ2ZF0 KQZF0 KQ2ZF0 KQZF0 KQ2ZF KQZF KQ2ZF KQZF -0S -0S

12 Accessory Plug KQ2P/KQP To plug unused one-touch fittings KQ2P (White), KQP (Blue). Tuing Cp To plug unused tuing. KQ2C/KQC KQ2 /KQ fitting size 1 KQ2P (White) KQP (Blck) KQ2P-23 KQP-23 KQ2P-0 KQP-0 KQ2P-0 KQP-0 KQ2P-0 KQP-0 KQ2P- KQP- KQ2P- KQP- KQ2P-1 KQP-1 1 KQ2C (White) KQC (Blck) KQ2C0-00 KQC0-00 KQ2C0-00 KQC0-00 KQ2C0-00 KQC0-00 KQ2C-00 KQC-00 KQ2C-00 KQC-00 KQ2C1-00 KQC1-00 Nipple To connect 2 one-touch fittings. KQ2N/KQN Color Cp KQ2C Attched to relese uttons for vrious pplictions to distinguish them y color. Different Di. Nipple fitting size KQ2N (White) KQN (Blck) 1 KQ2N0-99 KQ2N0-99 KQ2N0-99 KQ2N-99 KQ2N-99 KQ2N1-99 KQN0-99 KQN0-99 KQN0-99 KQN-99 KQN-99 KQN1-99 KQ2N/KQN To connect one-touch fittings of different sizes. fitting size KQ2N (White) KQN (Blck) 1 KQ2N0-0 KQ2N0-0 KQ2N0- KQ2N- KQ2N-1 KQN0-0 KQN0-0 KQN0- KQN- KQN-1 1 KQ2C-01 KQ2C-01A- KQ2C-01B- KQ2C-0 KQ2C-0A- KQ2C-0B- KQ2C-0 KQ2C-0A- KQ2C-0B- KQ2C-0 KQ2C- KQ2C- KQ2C-1 Appliction KQH, KQ2H23-M5 KQL, KQ2L23-M5 KQT, KQ2T23-M5 KQY, KQ2Y23-M5 KQH, KQ2H0-M5, M KQS, KQ2S0-M5, M KQL, KQ2L0-M5, M KQT, KQ2T0-M5, M KQY, KQ2Y0-M5, M KQH, KQ2H0-M5, M KQS, KQ2S0-M5, M KQL, KQ2L0-M5, M KQT, KQ2T0-M5, M KQY, KQ2Y0-M5, M B (Blck), R (Red), YR (Ornge), BR (Brown), Y (Yellow), G (Green), CB (Sky lue), GR (Gry), W (White), BU (Blue) Adpter KQ2N/KQN To connect one-touch fitting nd R femle. fitting size M5 X 0. R1/ M5 X 0. R1/ KQ2N (White) KQN (Blck) KQ2N0-M5 KQN0-M5 KQ2N0-M5 KQN0-M5 KQ2N0 KQN0 KQ2N KQN

13 Order Mde Electroless Nickel Plted on Brss Prts (Exmple) KQ2H0-X2 X2 Mde to Order Luricnt: Vseline (Exmple) KQ2H0-X X Electroless Nickel Plting on Brss Prts (X2) Luricnt: Vseline (X) (Exmple) KQ2H0-X1 X1 Electroless Nickel Plting on Brss Prts (X2) Sel, O-ring: Fluororesin Ruer (Exmple) KQ2H0-X7 No Luriction (Exmple) KQ2H0-X57 X7 X57 Sel: Fluororesin Coting Oil Free: No Luriction (Exmple) KQ2H0-X17 Electroless Nickel Plting on Brss Prts (X2) Sel: Fluororesin Coting Oil Free: No Luriction (X17) (Exmple) KQ2H0-X29 X17 X29 Clen Series Electroless nickel plting on rss prts (X2) Luricnt: Fluororesin grese Doule pckging Resin odyrelese utton: White (Exmple) -KQH0-13

One-Touch Mini Fittings

One-Touch Mini Fittings Series KJ One-Touch Mini Fittings One-Touch Mini Fittings Series KJ Features Outside diameter reduced by 20%(Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For

More information

Selection guide for piping equipment. Pneumatic Piping Equipment

Selection guide for piping equipment. Pneumatic Piping Equipment Selection guide for piping equipment Pneumatic Piping Equipment Piping Equipment INDEX Fittings One-touch Fittings KQ/KQ P. Miniature One-touch KJ P.5 Rotary One-touch Fittings KS/KX Tube Coupler KC One-touch

More information

PIRTEK FLUID SYSTEMS. Pneumatic Product Guide. Air Preparation Valves Flow Controls Cylinders Fittings Blow Guns Tubing

PIRTEK FLUID SYSTEMS. Pneumatic Product Guide. Air Preparation Valves Flow Controls Cylinders Fittings Blow Guns Tubing Your partner in pneumatics and automation PITEK FLUID SYSTEMS Pneumatic Product Guide Air Preparation Valves Flow Controls Cylinders Fittings Blow Guns Tubing PITEK FLUID SYSTEMS PTY LTD are a PEFEED NATIONAL

More information

Applicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications

Applicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications One-touch Mini : Metric Size Connecting : M3, M5, R1/8 Outside diameter reduced y 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring

More information

PLUS MUCH, MUCH MORE...

PLUS MUCH, MUCH MORE... SECTION HIGHLIGHTS... 258 INDUSTRIAL HOSES & TUBES Page........552-553 259 AIR LINE FITTINGS SMC PNEUMATICS CAMOZZI PNEUMATICS KENNEDY PNEUMATICS Page........554-557 Page........558-576 Page........577-589

More information

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN

More information

Appendix E D791 and T791 Head and Valve Holddown Assembly Details

Appendix E D791 and T791 Head and Valve Holddown Assembly Details Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve

More information

Application Examples of Air-piloted Valves

Application Examples of Air-piloted Valves ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht

More information

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6 4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte

More information

BIMETAL-POINTER-THERMOMETER

BIMETAL-POINTER-THERMOMETER BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.

More information

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24 POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6

More information

Transmission and Driveline. Section 2A - Transmission and Driveline

Transmission and Driveline. Section 2A - Transmission and Driveline Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2

More information

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4 Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt

More information

STK Series. Specifications. Stroke length (mm) High rigid cylinder Double acting/chamfered round rod end. Bore size: 20, 32, 40, 50 mm.

STK Series. Specifications. Stroke length (mm) High rigid cylinder Double acting/chamfered round rod end. Bore size: 20, 32, 40, 50 mm. High rigid cylinder Doule cting/chmfered round rod end STK Series :, 32, 40, 50 mm JIS symol Doule cting CAD DATA AVAILABLE. Specifictions STK mm di. Actution Working fluid Mx. working pressure MP Doule

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl

More information

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx

More information

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted

More information

4/2- and 4/3-way shut-off valve

4/2- and 4/3-way shut-off valve Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt

More information

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1. Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description

More information

Hose Claw Couplings SKG 13-DR SKG 19-DR SKG 25-DR

Hose Claw Couplings SKG 13-DR SKG 19-DR SKG 25-DR Swivelling, IN 89 High qulity couplings, hed of mlleble iron, thred connections nd hose stem of turned steel with specil profile, zinc-plted nd yellow pssivted (free of chrome VI) with sfety notches 30

More information

Series. 777 Oakmont Lane, Westmont, IL Outside U.S

Series. 777 Oakmont Lane, Westmont, IL Outside U.S Oakmont Lane, Westmont, IL 609 1.800..9114 Outside U.S. 1-60-90-6990 www.tksimplex.com G SERIES IR TORQUE PUMP PRTS IDENTIFICTION MNUL Reference # - TD09 Rev. - Date - 8/10 This illustration is for reference

More information

ELECTRICAL SYSTEM 4 D INSTRUMENTATION

ELECTRICAL SYSTEM 4 D INSTRUMENTATION ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1

More information

JUMO MIDAS S05 OEM pressure transmitter - universal

JUMO MIDAS S05 OEM pressure transmitter - universal Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:

More information

SSAB Water mains PIPES AND FITTINGS

SSAB Water mains PIPES AND FITTINGS SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize

More information

FINGER STRIPS. and other EMI shielding products. Characteristics

FINGER STRIPS. and other EMI shielding products. Characteristics BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used

More information

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073

More information

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge

More information

152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:

152mm (6) DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES: 2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I

More information

Suspension Control Module

Suspension Control Module User Mnul Suspension Control Module 0099 Before Instlltion Wrning: This owering Module should be instlled by n individul with extensive knowledge in electronics, including: wire identifiction, extrcting

More information

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8. Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis

More information

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D 51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction

More information

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273 Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd

More information

Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material

Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases

More information

FUEL SYSTEM. Table of Contents. Section 3B Direct Fuel Injection

FUEL SYSTEM. Table of Contents. Section 3B Direct Fuel Injection FUEL SYSTEM Section 3B Direct Fuel Injection Tle of Contents DIRECT FUEL INJECTION Specifictions........................... 3B-2 Specil Tools........................... 3B-3 Throttle Body...........................

More information

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,

More information

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02 CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................

More information

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally) FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................

More information

ABS PIPES & FITTINGS THE INDUSTRY STANDARD FOR A WIDE RANGE OF APPLICATIONS

ABS PIPES & FITTINGS THE INDUSTRY STANDARD FOR A WIDE RANGE OF APPLICATIONS S PIPES & FITTINGS THE INDUSTRY STNDRD FOR WE RNGE OF PPLICTIONS VUX VERSION 2 S PIPE & FITTINGS FOR INDUSTRIL PPLICTIONS INTRODUCTION S thermoplastics are recognized as a suitable material to be used

More information

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces: 4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4

More information

LTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption

LTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity

More information

Miniature Fittings Series M

Miniature Fittings Series M Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

More information

Appendix E Head and Valve Assembly Details All D-Style Models 351

Appendix E Head and Valve Assembly Details All D-Style Models 351 Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All

More information

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation 3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US

More information

SECTION C Engine 6.0L Diesel

SECTION C Engine 6.0L Diesel 303-01C-i Engine 6.0L Diesel 303-01C-i SECTION 303-01C Engine 6.0L Diesel CONTENTS PAGE SPECIFICATIONS... 303-01C-2 303-01C-2 Engine 6.0L Diesel 303-01C-2 SPECIFICATIONS Mteril Gsket Mker TA-16 Motorcrft

More information

Solenoid operated spool valve with soft switching NG10 ISO

Solenoid operated spool valve with soft switching NG10 ISO WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool

More information

Data Sheet T /4/5/6 EN

Data Sheet T /4/5/6 EN Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves

More information

FUEL SYSTEM & CARBURETION 3 A CARBURETOR R1 JUNE 1996 FUEL SYSTEM AND CARBURETION

FUEL SYSTEM & CARBURETION 3 A CARBURETOR R1 JUNE 1996 FUEL SYSTEM AND CARBURETION FUEL SYSTEM & CARBURETION 3 A CARBURETOR 90-831996R1 JUNE 1996 FUEL SYSTEM AND CARBURETION 3A- 1 Tle Of Contents Pge Removing Cruretor..................... 3A-1 Disssemling Cruretor................. 3A-1

More information

TFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008

TFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008 Ctlog No. V81-5 Sept. 2008 Vlve with lever hndle Working pressure sets: 68.9 br (1000 psig) TFM sets: 137 br (2000 psig) Vlve with butterfly hndle Working pressure sets: 68.9 br (1000 psig) TFM sets not

More information

3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94

3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94 3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl

More information

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface. MSR SERIES MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our web. Avilble rnge -30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce. Esy to punching or hole milling on front nd rer

More information

Control stations and enclosures Control station enclosures : insulated, metal and flush mounting

Control stations and enclosures Control station enclosures : insulated, metal and flush mounting Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil

More information

Incremental encoders Solid shaft with square flange pulses per revolution

Incremental encoders Solid shaft with square flange pulses per revolution Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil

More information

GUARDIAN VERTICAL MOUNTING

GUARDIAN VERTICAL MOUNTING GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with

More information

INSTALLATION GUIDE INSTALLATION GUIDE

INSTALLATION GUIDE INSTALLATION GUIDE INSTALLATION GUIDE INSTALLATION GUIDE CONTACT US By selecting Hiku fn, you ve chosen qulity design, heightened comfort nd effortless conservtion. Use this guide to sfely instll your fn. Plese contct us

More information

Tube Applicable for nylon, soft nylon and polyurethane tubing.

Tube Applicable for nylon, soft nylon and polyurethane tubing. Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

More information

The W4G4 Series plug-in manifold has been upgraded in all performance areas, including installation area, workability, life, and power consumption.

The W4G4 Series plug-in manifold has been upgraded in all performance areas, including installation area, workability, life, and power consumption. M MN W Slim profile The WG Series plug-in mnifold hs een upgrded in ll performnce res, including instlltion re, workility, life, nd power consumption. Drive cylinders up to in dimeter M-T0 *0E 0% Conventionl

More information

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website. MSR SERIES Technicl dt Protection clss IP40 MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our website. Avilble rnge W-30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce for sophisticted

More information

Product range MEGAlife

Product range MEGAlife Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.

More information

JET PUMP. Table of Contents. Section 5 - Jet Pump

JET PUMP. Table of Contents. Section 5 - Jet Pump Tble of Contents JET PUMP Section 5 - Jet Pump JET PUMP Generl Informtion..................... 5-2 Principles of Opertion................ 5-2 Mster Specifictions Jet Pump........... 5-3 Specil Tools........................

More information

Boiler room components 0861EN April 2017 Distribution and regulation units

Boiler room components 0861EN April 2017 Distribution and regulation units oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling

More information

Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers

Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used

More information

BRASS PIPE FITTINGS 100A-BA. CONSTRUCTION CA360, CA345, CA3604, CA377 Brass. Use with brass, copper or iron pipe. Temperature Range: 65 to +250 F.

BRASS PIPE FITTINGS 100A-BA. CONSTRUCTION CA360, CA345, CA3604, CA377 Brass. Use with brass, copper or iron pipe. Temperature Range: 65 to +250 F. RSS FITTINGS RSS FITTINGS CONSTRUCTION C360, C345, C3604, C377 rass PPLICTIONS RNGES Use with brass, copper or iron pipe Temperature Range: 65 to +250 F. Pressure Range: Up to 1000 PSI Pipe Thread ssembly:

More information

DRIVE SHAFTS INDEX

DRIVE SHAFTS INDEX DRIVE SHAFTS 8 70237 Tble of Contents Pge Specifictions............................... 8-1 Torque Specifictions..................... 8-1 Specil Tools............................ 8-1 Lubricnts, Selnts,

More information

Brazed heat exchanger XB

Brazed heat exchanger XB Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the

More information

POWERHEAD R1 JUNE 1996 POWERHEAD

POWERHEAD R1 JUNE 1996 POWERHEAD POWERHEAD 4 90-831996R1 JUNE 1996 POWERHEAD 4-1 Tle Of Contents Pge Powerhed Specifictions BOTTOM GUIDED PISTON............. 4-1 Specil Tools.......................... 4-1 Finished Hone Bore Size...............

More information

FUEL SYSTEM. Table of Contents. Section 3C Oil Injection

FUEL SYSTEM. Table of Contents. Section 3C Oil Injection Tle of Contents FUEL SYSTEM Section 3C Oil Injection OIL INJECTION Specil Tools................................ 3C-2 Oil System Opertion......................... 3C-2 Oil Pump Output..........................

More information

Aluminium Floor Outlets - Trapped Outlets

Aluminium Floor Outlets - Trapped Outlets Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown

More information

Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x

Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,

More information

FUEL SYSTEM. Table of Contents. Section 3B - Carburetors. Attenuator And Carb Throttle Levers... 3B-2 Fuel Lines... 3B-4

FUEL SYSTEM. Table of Contents. Section 3B - Carburetors. Attenuator And Carb Throttle Levers... 3B-2 Fuel Lines... 3B-4 Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Attenutor And Cr Throttle Levers....... 3B-2 Fuel Lines.............................. 3B-4 Cruretor............................. 3B-6 Fuel

More information

SOLENOID VALVES / DIRECTIONAL CONTROL VALVES

SOLENOID VALVES / DIRECTIONAL CONTROL VALVES OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected

More information

Control stations and enclosures

Control stations and enclosures Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version:

More information

Kit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves

Kit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves Selection Guide TAC 1354 Clifford Avenue P. O. Box 2940 Loves Prk, IL 61132-2940 www.tc.com AV-8xx Series Competitive Gloe Adpters AV-8xx Series Adpter Kits TAC AV-8xx Series Adpter Kits mount on the onnet

More information

Duct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR

Duct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR LindRekt LindRekt mens rectngulr ventiltion ducts nd fittings. These re mde in oth stndrd nd specil versions. The product rnge lso includes complete, esily used joining system. Contents LindRekt Generl

More information

FUEL SYSTEM. Table of Contents. Section 3B - Carburetors

FUEL SYSTEM. Table of Contents. Section 3B - Carburetors Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Fuel System - Trouleshooting.............. 3B-2 Generl Informtion.................... 3B-2 Attenutor And Cr Throttle Levers......... 3B-4

More information

JET PUMP R1 JUNE 1996 JET PUMP

JET PUMP R1 JUNE 1996 JET PUMP JET PUMP 5 90-831996R1 JUNE 1996 JET PUMP 5-1 Tle Of Contents Pge Generl Informtion....................... 5-1 Priniples of Opertion................. 5-1 Speil Tools.......................... 5-2 Serviing

More information

-XC9: Adjustable Stroke Cylinder/Adjustable Retraction Type

-XC9: Adjustable Stroke Cylinder/Adjustable Retraction Type -XC: djustle Stroke Cylinder/djustle etrction Type djustle Stroke Cylinder/djustle etrction Type The retrct stroke of the cylinder cn e djusted y the djustment olt. pplicle Series Series Description Model

More information

SECTION D Engine 6.0L Diesel

SECTION D Engine 6.0L Diesel 303-01D-i Engine 6.0L Diesel 303-01D-i SECTION 303-01D Engine 6.0L Diesel CONTENTS PAGE SPECIFICATIONS... 303-01D-2 303-01D-2 Engine 6.0L Diesel 303-01D-2 SPECIFICATIONS Mteril Fill Cpcity Gsket Mker TA-16

More information

IP65 ABS PLASTIC BOX with OUTDOOR ROOF

IP65 ABS PLASTIC BOX with OUTDOOR ROOF BCAR SERIES BCPR SERIES IP65 ABS PLASTIC BOX with OUTOOR ROOF IP65 POLYCARBONATE PLASTIC BOX with OUTOOR ROOF 3 1 Technicl t Protection clss: IP65 Operting temperture: BCAR -10 C ~ +60 C BCPR -0 C ~ +75

More information

BRAVO STERN DRIVE 3 B DRIVE SHAFT HOUSING

BRAVO STERN DRIVE 3 B DRIVE SHAFT HOUSING RVO STERN DRIVE 7 DRIVE SHFT HOUSING Tle of ontents Pge Specifictions............................... -1 Torque Specifictions..................... -1 Specil Tools............................ -1 ering Prelods.........................

More information

JS Series Sub-Miniature Slide Switches

JS Series Sub-Miniature Slide Switches Su-Miniture Switches Fetures/enefits Positive detent Low profile IR reflow to 60º solder profile Surfce nd thru hole mounting, DPDT, DPT models RoHS complint Typicl pplictions Telecommuniction products

More information

Print This Page. Return To Index

Print This Page. Return To Index PLASTI-BOND REDH2OT KNOCKOUT HUBS KNOCKOUT HUBS PRST2 PRSTG2 Knockout Hubs Specifictions Knockout Hubs Configurtions ST STG2 b c STTB STTTB d COMPLIANCES PLASTI-BOND REDH 2 OT ST style knockout hubs re

More information

Hazardous Location Push Button Specifications

Hazardous Location Push Button Specifications Technicl Dt Hzrdous Loction Push Button Specifictions Bulletin Numers 800G, 800H, nd 800R Topic Pge Topic Pge 800H Type 7&9 Hzrdous Loction Push Buttons 800G Hzrdous Loction Push Buttons Specifictions

More information

Available in a wide range of metric and English. Special rubber resistant to oils. Code Desc. Di mm DE mm SPE mm 41400***** ***** ***** ***** *****

Available in a wide range of metric and English. Special rubber resistant to oils. Code Desc. Di mm DE mm SPE mm 41400***** ***** ***** ***** ***** Sels O-Ring NBR 70 Blck color Avilble in wie rnge of metric n English. Specil rubber resistnt to oils. Di DE SPE 41400***** ***** ***** ***** ***** O-Rings ssortment Content: 16 mesures of O-ring 010 to

More information

FUEL SYSTEM. Table of Contents. Specifications. Special Tools. Section 3A Pulse Crankcase Driven Fuel Pump. Model 75/90/115

FUEL SYSTEM. Table of Contents. Specifications. Special Tools. Section 3A Pulse Crankcase Driven Fuel Pump. Model 75/90/115 PULSE CRANKCASE DRIVEN FUEL PUMP FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions........................... 3A-1 Specil Tools........................... 3A-1 Fuel Pump.............................

More information

HAZET Range of Pullers / Extractors

HAZET Range of Pullers / Extractors HAZET Rnge of 2-Arm Pullers Forged qulity 3-Arm Pullers Prcticl nd proven tools Hydrulic Pullers New innovtive rnge of pullers ll ering Extrctors For industry, utomotive sector, commercil see Specilty

More information

WINDSHIELD / WINDOWGLASS

WINDSHIELD / WINDOWGLASS WINSHIEL / WINOWGLSS QURTER WINOW GLSS QURTER WINOW GLSS OY WINSHIEL / WINOWGLSS OMPONENTS 97 RER SIE SETK FRME LH RER SIE SETK FRME RH RER SET USHION SSEMLY RER OOR OPENING TRIM WETHERSTRIP LH TONNEU

More information

AWWA Grooved Fittings

AWWA Grooved Fittings WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness

More information

TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH

TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH This rnge hs been used to monitor very smll chnges in vcuums nd hs been specified extensively for offshore

More information

8060 Series Alternate Action and Momentary Pushbutton Switches

8060 Series Alternate Action and Momentary Pushbutton Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers

More information

Series AIR LINE COMPRESSED AIR DISTRIBUTION SYSTEM

Series AIR LINE COMPRESSED AIR DISTRIBUTION SYSTEM Series IR LINE COMPRESSED IR DISTRIUTION SYSTEM 26 IR LINE IR DISTRIUTION SYSTEM FETURES ND ENEFITS Installation ease: IR LINE installations can be carried out easily by the end-user, eliminating the need

More information

AWWA Grooved Fittings

AWWA Grooved Fittings WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Solenoid ilot Operted Directionl Control Vlve Nomenclture 1 pplicle fluid code No designtion: etroleum-sed hydrulic fluid H: Wter-glycol hydrulic fluid F: hosphte ester hydrulic fluid 2 3 Model No. ME:

More information

DOUBLETRACK 990XT PARTS INCLUDED G F I Q T Y Z. part description part number qty. 1 O. 4 lever / levier / palanca 4 Q 4 R 4 T.

DOUBLETRACK 990XT PARTS INCLUDED G F I Q T Y Z. part description part number qty. 1 O. 4 lever / levier / palanca 4 Q 4 R 4 T. DOUBLETRACK 990XT PARTS INCLUDED C B K N A U V W X L M D R E J O P H S G F I Q T Y Z prt description prt numer qty. A B C D E F G H I J K L stinger & ckone ssemly ike tue & wheel holder ssemly upright

More information

Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck

Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.

More information