Selection guide for piping equipment. Pneumatic Piping Equipment

Transcription

1 Selection guide for piping equipment Pneumatic Piping Equipment

2 Piping Equipment INDEX Fittings One-touch Fittings KQ/KQ P. Miniature One-touch KJ P.5 Rotary One-touch Fittings KS/KX Tube Coupler KC One-touch Fitting Manifold KM Piping Module KB P.1 P. P. P. Rectangular Multi-connector KDM P. Speed Controller with Fittings Elbow/ Universal Type AS1F Inline Type AS01F P.9 P.111 Dual Speed Controller ASD0F P.1 Low Speed Control: Elbow / Universal Type AS1FM Low Speed Control: Inline Type AS01FM Low Speed Control: Dual Speed Controller ASD0FM Related KE Equipment P.19 P.11 P.115 P.11 Residual Pressure Exhaust Valve with One-touch Fittings Tubing Polyurethane Tubing TU Soft Polyurethane Tubing TUS Nylon Tubing T Soft Nylon Tubing TS Wear Resistant Tubing TUZ P.1 P.15 P.17 P.19 P.15 INDEX 1

3 Piping Equipment INDEX Multi-connector DM P. Clean One-touch Fittings KPQ/KPG P.1 S Couplers KKH P.7 Self-align Fittings H,DL,L,LL P.9 Multi-connector with One-touch Fittings DMK P. Antistatic One-touch Fittings KA P. S Couplers/Stainless Steel Type KKA P.0 Miniature Fittings M P.9 Stainless Steel 1 One-touch Fittings KQG P. FR One-touch Fittings KR P. S Couplers KK10 coing soon! Stainless Steel Miniature Fittings MS P.97 Stainless Steel One-touch Fittings KG P.51 FR One-touch Fitting Manifold KRM P.7 Insert Fittings KF P. High Purity Fluoropolymer Fittings LQ1/LQ P.99 Clean One-touch Fittings KP P.5 S Couplers KK P.75 Stainless Steel Insert Fittings KFG P.7 Stainless Steel 1:ElbowType ASGF Stainless Steel:Elbow/Universal Type AS1FG Stainless Steel:Inline Type AS01FG Stainless Steel:Dual Speed Controller ASD0FG P.117 P.1 P. Clean Speed Controller AS1FP Flame Resistant:Metal Body Elbow Type P. Inline Type P.119 P.5 P.11 P.17 AS1-F Residual Pressure Exhaust Valve: Elbow/Universal Type AS1FE Speed Exhaust Controller ASV0F P.7 P.9 With Pilot Check Valve ASP0F Tamper Proof:Elbow/Universal Type AS1F-T Tamper Proof:Inline Type AS01F-T Tamper Proof:Dual Speed Controller ASD0F-T P.10 P.1 P.1 Flat Head Screw Driver Adjustment: Universal Type AS1F-D Flat Head Screw Driver Adjustment: AS01F-D Flat Head Screw Driver Adjustment: Dual Speed Controller ASD0F-D P.15 P.1 Holder Multiple Holder Check Valve with One-touch Fittings Quick Exhaust Valve with Built-in One-touch Fittings Energy Saving Valve TMH TMA AKH/AKB AQ0F ASR/ASQ P.19 P.19 P. P. P.11 Hard Polyurethane Tubing TUH P.151 Polyolefin Tubing TPH P.157 FEP Tubing (Fluoropolymer) TH P.1 FR Soft Nylon Tubing TRS P.17 Polyurethane Coil Tubing TCU P.155 Soft Polyolefin Tubing TPS P.159 Antistatic Polyurethane Tubing TAU P.15 FR Double Layer Polyurethane Tubing TRBU P.19 Polyurethane Flat Tubing TFU P.15 High Purity Fluoropolymer Tubing TL/TIL P.11 Antistatic Soft Nylon Tubing TAS P.1 FR Double Layer Tubing TRB P.171 Related Equipment Tubing Stand TB P.17 Tubing Reel TBR P.17 Tubing Cutter Multiple Tubing Holder Tubing Release Tool FR Double Layer Tubing Stopper TK TM TG TKS P.17 P.17 P.17 P.17 Blow Gun VMG P.175 Nozzle for Blow KN P.17 INDEX

4 Introduction of Piping Equipment Fitting General One-touch Fittings (White) KQ With G Type Connection Threads With UNI Type Connection Thread New P. P.17 P.1 Without tubing Tubing Coupler KC With tubing P. One-touch Fittings (Black) KQ P. One-touch Fitting Manifold KM P. Mini New Miniature One-touch KJ For ø tube P.5 One-touch attachment and removal Piping Module KB P. Rotation Rotary One-touch Fittings KS / KX P.1 Rectangular Multi-connector KDM P. KS KX Front matter 1

5 Introduction of Piping Equipment Fitting Multi Connector DM P. S Couplers KK10 Coming soon! Multi-connector with One-touch Fittings DMK P. Insert Fittings KF P. Sleeve One-touch fitting With sleeve lock (except KK) S Couplers KK P.75 Soft copper Self-align Fittings H, DL, L, LL Sleeve P.9 Spacer (High impact PBT) Without sleeve lock S Couplers KKH P.7 Coverring (Super high impact PBT) Mini New Miniature Fittings M P.9 For ø tube Sleeve cover (Rubber) Front matter

6 Introduction of Piping Equipment Fitting For Special Environment Corrosion Resistant Stainless Steel 1 One-touch Fittings Stainless Miniature Fittings Stainless Steel Insert Fittings KQG P. MS P.97 KFG P.7 Stainless Steel 1 Stainless Steel 1 Stainless Steel 1 Heat resistant Heat resistant New Stainless Steel One-touch Fittings S Couplers KG P.51 KKA P.0 Stainless Steel 0 Stainless Steel 0 Heat resistant New New Antistatic Measures Antistatic One-touch Fittings KA P. Antistatic Spatter proof Flame resistant Heat Resistant High Purity Fluoropolymer Fittings LQ1/LQ P.99 NewPFA Corrosion resistant Clean Flame resistant FR One-touch Fittings KR Spatter Proof FR One-touch Fitting Manifold P. KRM P.7 Flame resistant Front matter

7 Introduction of Piping Equipment Fitting Clean room Clean Clean Series: One-touch Fittings Clean Series: Miniature One-touch Clean Series: Stainless Steel -KQ P.19 -KJ P.0 -KG P.57 Clean Series: Rectangular Multi-connector -KDM P. Clean Series: Miniature Fittings Clean Series: Insert Fittings -M MS P.9 -KF P. -M -MS Clean One-touch Fittings KP For clean blow and washing lines P.5 Clean One-touch Fittings KPQ / KPG For drive system air piping P.1 Front matter

8 Introduction of Piping Equipment Speed Controller General Elbow Type AS F Universal Type AS F P.9 P.9 Inline Type AS F P.111 Dual Speed Controller ASD F Lurch prevention, Single acting cylinder control P.1 Meter out needle Meter in needle For Low Speed Operation Elbow/Universal Type Inline Type Dual Type AS FM P.11 AS FM P.115 ASD FM P.11 P.7 Speed control Low speed operation in the range of of small-bore to 50 /s cylinders Front matter 5

9 Introduction of Piping Equipment Speed Controller Elbow Type ASG Stainless steel P.117 For Special Environment Corrosion Resistant Elbow/Universal Type AS FG P.119 Inline Type AS FG P.1 Dual Type ASD FG P. Stainless steel 1 Stainless steel 0 Clean Clean room Clean Series -AS F Clean Speed Controller AS-FPQ/FPG Clean room P. General Dual Low speed control Low speed control dual Stainless steel Stainless dual Flame resistant (Metal elbow) Tamper proof Tamper proof dual Flat head screw adjustment Flat head screw adjustment dual -AS F -ASD F -AS FM -ASD FM -AS FG -ASD FG -AS-F -AS F-T -ASD F-T -AS F-D -ASD F-D Elbow P.1 P.1 P.111 P.1 P.11 P.11 P.115 P.11 P.0 P.0 P.1 P. Universal P. P.1 P.1 P.1 P.1 P.15 P.15 P.1 P.17 Inline Spatter Proof Metal Elbow Type with One-touch Fittings Metal body and flame resistant resin for fitting parts AS-F P.5 Front matter

10 Introduction of Piping Equipment Speed Controller Exhaust Residual Pressure Exhaust Residual pressure exhaust from cylinder Push Elbow/Universal Type AS FE Exhaust P.7 With Special Function Quick Exhaust Speed Exhaust Controller ASV F High speed cylinder operation P.9 Tool Adjustment Type Tamper proof (Handled with special tools) Elbow/Universal Type AS F-T P.11 Inline Type AS F-T P.1 Dual Type ASD F-T P.1 Special tool Driver operation type Elbow/Universal Type AS F-D P.15 Inline Type AS F-D P.17 Dual Type ASD F-D P.1 Flat head screw driver Front matter 7

11 Introduction of Piping Equipment Speed Controller Drop Prevention Speed Controller with Pilot Check Valve Drop prevention and emergency stop ASP F Pilot port P.10 Valve side Cylinder side Related Equipment Check Valve with One-touch Fittings Quick Exhaust Valve with One-touch Fittings Residual Pressure Exhaust Valve with One-touch Fittings AKH/AKB P. AQ F P. KE P.19 Holder TMH Securing inline type speed controller Multiple Holder P.19 TMA P.19 Energy Saving Valve ASR/ASQ P.11 Securing Series KE, Securing Series KQL, T and H Front matter

12 Introduction of Piping Equipment Tubing General 9 colour variations Polyurethane Tubing TU P.1 Neon green (G) Black (B) Dark green (G) White (W) Grey (GR1) Red (R) Light grey (GR) Blue (BU) Neon pink (P1) Yellow (Y) Solid purple (PU1) Green (G) Clear purple (PU) Clear (C) Solid red (R1) Orange (YR) Clear red (R) Solid blue (BU1) Silver (S1) Clear blue (BU) Solid yellow (Y1) Medium blue (BU) Clear yellow (Y) Brown (BR1) Neon yellow (Y) Solid green (G1) Clear orange (YR1) Clear green (G) Neon orange (YR) Front matter 9

13 Introduction of Piping Equipment Tubing Soft Polyurethane Tubing TUS Extremely flexible P.15 Nylon Tubing T P.17 Soft Nylon Tubing TS P.19 Hard Polyurethane Tubing TUH P.151 Wear Resistant Tubing TUZ Abrasion P.15 Coil Polyurethane Coil Tubing TCU P.155 Flat Polyurethane Flat Tubing TFU P.15 General For special environment Soft polyurethane Nylon Soft nylon Hard polyurethane tubing Polyurethane coil tubing Polyurethane flat tubing Wear resistant tubing (Abrasion: Approx. 1/) Antistatic tubing FR nylon tubing (Flame resistant) FR double layer tubing (Flame resistant) TUS T TS TUH TCU TFU TUZ TAU/TAS TRS TRBU/TRB Tubing colour Note) Series TCU and TFU except for black types are produced upon requests. Black White Red Blue Yellow Green Orange Yellow Transparent Translucent brown Front matter

14 Introduction of Piping Equipment Tubing For Special Environment Clean Polyolefine resin Clean Tubing TPH/TPS P.157 Clean room Clean Series -TU,TCU,TFU -TU P.1 -TCU P.1 -TFU P.1 Spatter Proof FR Nylon Tubing FR Double Layer Tubing FR Double Layer Tubing Stripper TRS P.17 TRBU/TRB P.19 Tubing outer layer TKS P.17 Flame resistant Inner tube peeling tool Outer layer Flame resistant Window soft type FR double layer tube view Tube Antistatic measures Antistatic Measures Antistatic Tubing TAU/TAS P.15 Front matter 11

15 Introduction of Piping Equipment Tubing Heat Resistant High Purity Fluoropolymer Tubing FEP Tubing (Fluoropolymer) TL/ TIL P.11 TH P.1 SuperPFA Corrosion resistant New Clean Related Equipment Tubing Cutter TK P.17 Tubing Stand TB P.17 Multiple Tubing Holder TM P.17 Blow Gun VMG P.175 Tubing Release Tool TG P.17 Nozzle for Blow KN P.17 Tubing Reel TBR P.17 Front matter

16 Piping Equipment Applications and Themes Applications and themes Clean Low particle generation Corrosion Resistant Stainless steel /High purity fluoropolymer Heat Resistant Metal/High Purity Fluoropolymer Antistatic Measures Antistatic Low Speed Control to 50 /s Residual Pressure Exhaust Residual pressure evacuation Fitting For blowing KP For drive system air piping KPQ/KPG Clean series Series - LQ1/LQ KQG KFG KG MS KKA LQ1/LQ KQG KFG KKA LQ1/LQ KA Speed controller Clean speed controller AS-FPQ/FPG Clean series Series - ASG (Elbow) AS FG (Elbow/Universal /In-line) ASD FG (Dual) AS FM (Elbow/Universal /In-line) ASD FM (Dual) AS FE (Elbow/Universal) Tubing Clean tubing TP (Polyolefin) Clean series Series - TL/TIL TL/TIL TL/TIL TH TA Other Residual pressure exhaust valve KE (With one-touch fittings) Front matter 1

17 Piping Equipment Applications and Themes Drop Prevention Lurch Prevention Spatter Proof Quick Exhaust Oil Free Pilot check Meter-in/Meter-out control Flame resistant Quick exhaust No lubricant Vaseline lubrication KR KRM (Manifold) H,DL,L,LL KA No greasing KQG KKA M (Miniature) KF (Insert) KFG (Insert) H, DL, L, LL (Self align) MS (Miniature/Stainless) KP (Clean fittings) Made to Order X17 (Fluororesin coating) X9 (Fluororesin coating +Electroless nickel plating) Made to Order X (Vaseline) X1 (Vaseline+ Nickel plating) ASP F Dual speed controller ASD F ASD FG (Stainless steel) ASD F-T (Tamper proof) ASD F-D (Flat head screw adjustment) AS-F (Metal elbow with one-touch fittings) Speed exhaust controller ASV Made to Order X (Vaseline) TRS TRBU/TRB (Double layer tubing) Check valve AKH/AKB (With one-touch fittings) Quick exhaust valve AQ F (With one-touch fittings) Refer to Made to Order Products for models produced upon receipt of orders. Front matter 1

18 Piping Equipment Applications and Themes Low particle generation specifications for use in clean room Clean Clean Series (Series -) One-touch fittings -KQ -KJ P.15 P.0 Rectangular multi-connector Insert fittings -KDM -KF P. P. Clean Series (Series -) Double packaging Nickel plated metal parts Fluororesin grease Piping for actuator driving system Inside clean room Miniature fittings Speed controller with one-touch fittings Polyurethane tubing -M -MS -AS -TU -TCU -TFU P.9 P.9 Front matter P.1 P.155 P.15 Relief port piping Completely oil free Non-metal fluid contact parts Double packaging Clean blow system piping Inside clean room Exhaust piping for solenoid valve Piping for regulator breathing Clean One-touch Fittings&Tubing Drain piping Clean blow Clean one-touch fittings&tubing Clean one-touch fittings P.5 Clean one-touch fittings Polyolefine tubing KP KPQ KPG TPH TPS P.1 P.157 P.159 Super mist separator Clean tubing Order removal filter Clean fittings Air micro meter Pressure feeding of clean liquid N blow Clean Speed Controller Clean speed AS FPQ controller P. AS FPG N Gas Clean regulator port air operated valve Clean gas filter High Purity Fluoropolymer Fittings LQ1/LQ P.99 Tubing TL/TIL P.11 Front matter 15

19 Piping Equipment Applications and Themes Use of corrosion resistant stainless steel Corrosion Resistant Fittings One-touch KQG P. Insert KFG P.7 S Couplers KKA P.0 Metal part material Stainless steel 1 (MS, KQG, KFG, ASG) Stainless steel 0 (KKA) Stainless steel 0 (KG, AS FG, ASD FG) Prevents rust, discoloration and generation of copper ions. Applications: Food machinery and CRT lines Related equipment Stainless steel specifications air cylinder Series CJ5/CG5 Made to Order symbol XB XC XC7 XC7 Stainless parts Use of stainless steel on all external surfaces Piston rod, Rod end nut Tie-rod, Tie-rod nut, Cushion valve Pin for double clevis, Pin for double knuckle joint One-touch KG P.51 Miniature MS P.97 High purity fluoropolymer P.99 LQ1/LQ Speed controller with fittings Elbow Elbow ASG AS FG P.117 P.119 Universal AS FG P.119 Inline AS FG P.1 Dual ASD FG P. Tubing FEP High purity fluoropolymer TH TL/TIL P.1 P.11 Front matter 1

20 Piping Equipment Applications and Themes Metal or High purity fluoropolymer specifications Heat Resistant Fittings Stainless One-touch P. KQG Insert KFG P.7 S Couplers KKA P.0 Operating temperature (Max.)/Material KQG/KFG : 150 C/Stainless steel 1, Fluoro rubber High purity fluoropolymer KKA : 150 C/Stainless steel 0, Fluoro rubber LQ1/LQ P.99 LQ1 TH : 150 C/New PFA : 00 C/FEP LQ TL/ TIL : 00 C/New PFA : 0 C/Super PFA Tubing FEP TH P.1 Materials used for these products differ according to the operating High purity pressure. Be sure to see the catalogue for confirmation. fluoropolymer P.11 TL/TIL Antistatic Measures Prevents electro static charge One-touch fitting KA Antistatic P. Tubing TAU TAS P.15 Antistatic P.1 Use of conductive resin Grounding is possible Surface: Resistance to 7 with the UNI Ω construction, which does not require sealant. Applications: Semiconductor manufacturing, processing, etc. Front matter 17

21 Piping Equipment Applications and Themes Low Speed Control Low speed actuation Ideal for speed control of low speed cylinders Speed controller with fittings Low speed: Elbow AS FM P.11 Low speed: Universal AS FM P.11 Effective sectional area on control flow side: 1/ (Compared with standard products). Needle rotation: to 0 rotations. Dual type ideal for low speed control of small bore cylinders. Low speed: In-line Low speed: Dual AS FM ASD FM P.115 P.11 Related equipment Low speed cylinder Symbol Series X XB1 Speed 0.5 (1) /s 5 to 50 /s Residual Pressure Exhaust Prevents accidents caused by residual pressure Speed controller with fittings With residual pressure exhaust valve: Elbow AS FE P.7 With residual pressure exhaust valve: Universal AS FE P.7 Related equipment Speed controller and residual pressure exhaust valve integrated in one body. Exhaust Push Exhaust Residual pressure exhaust valve with one-touch fittings KE P.19 Easy exhaust by one push. Front matter 1

22 Piping Equipment Applications and Themes Drop Prevention Drop prevention and emergency stop is possible Speed controller with fittings With pilot check valve ASP F P.10 Related equipment Check valve with one-touch fittings AKH/ AKB P. work piece Integration of a pilot check valve and a speed controller. Lurch prevention with meter-in and meter-out control Lurch Prevention Speed controller with fittings Dual ASD F P.1 Stainless: Dual ASD FG P. Exhaust center Low speed: Dual ASD FM P.11 Integration of flow control valves and a check valve. Other applications: Speed control of single acting cylinders. Front matter 19

23 Piping Equipment Applications and Themes For use in atmosphere with spatters as in welding work shop Spatter Proof Fitting FR one-touch KR P. Manifold Self-align KRM H,DL, L,LL P.7 P.9 Antistatic KA P. Flame resistant (Equivalent to UL-9 Standards V-0) Double layer tubing Application: Spot welding. Outer layer TRB: PVC (Equivalent to UL-9 Standards V-0) TRBU: Polyolefin resin (Equivalent to V-0 in UL-9 Standards) Inner tubing TRB: Nylon11 TRBU: Polyurethane Speed controller with fittings Metal elbow Tubing FR tubing FR double layer tubing AS F TRS P.5 P.17 TRB TRBU P.19 P.171 Related equipment Double layer tubing stripper TKS P.17 Front matter 0

24 Piping Equipment Made to Order Products One-touch Fittings Made to order specifications White body Black body Miniature one-touch Rotary (Standard speed) P. P. P.5 P.1 P.1 P. P. P. KQ KQ KJ KS KX KC KM KB Rotary (High speed) Tubing coupler Manifold Piping module Rectangular multi-connector P. KDM Brass metal parts: Electroless nickel plated X X X Brass metal parts: Electroless nickel plated, Packing O-ring: Fluoro rubber Note ) X7 X7 Lubricant: Vaseline X X X X Oil-free: No lubrication X57 X57 X57 X57 Oil-free: No lubrication Packing: Fluororesin coating Note ) Lubricant: Vaseline Brass metal parts: Electroless nickel plated Oil-free: No lubrication Brass metal parts: Electroless nickel plated Packing: Fluororesin coating Clean series Note ) X17 X1 X9 X17 X1 X9 Note 5) X17 - X Front matter 1

25 Piping Equipment Made to Order Products Standardised Made to order specification available. Multi connector P. P. P.51 P.5 P.1 P. DM X Stainless steel KQG Stainless steel KG Clean KP Clean KPQ KPG Note ) Antistatic KA Flame resistant P. P.7 P. P.9 P.9 P.97 KR X Flame resistant manifold KRM X Insert Self-align KF H,DL L,LL X X Miniature M Note 1) Miniature (Stainless steel) MS X X57 Note ) X Note 1) Only M-5E, M-5ER and M-5M are available for X. Note ) Not including M-5UN and MS-5UN. Note ) Only available for a part of models. Note ) Not including inch sizes. Note 5) -KQ has a white body. Note ) Stainless steel 0 with KPG. Front matter

26 Piping Equipment Made to Order Products Speed Controller with Fittings Made to order specifications General Dual Low speed control Low speed control dual P.9 P.1 P.11 P.11 P.119 P. Stainless steel Stainless steel dual AS F ASD F AS FM ASD FM AS FG ASD FG Lubricant: Vaseline X X X X X X Throttle valve (Without check valve) X1 X1 X1 Throttle valve (Without check valve) Oil free (Sealant material: PTFE coating) Clean series - X1 - X1 - X Tubing Reel Made to order specifications Change in the number of coil windings and colour Change in the number of tubes and colour Clean series Polyurethane P.1 P.17 P.19 P.155 P.15 TU T TS TCU TFU X Nylon Soft nylon Coil polyurethane X X X X Polyurethane flat X Front matter

27 Piping Equipment Made to Order Products P. AS FPQ AS FPG Standardised P.5 - AS-F X X1 X1 - P.7 P.9 P.10 P.11 P.1 P.15 P.1 AS FE ASV F ASP F AS F-T X X1 X1 ASD F-T X AS F-D ASD F-D X X X X X1 X1 - X X1 X1 - - Clean polyolefin Clean Flame resistant (Metal elbow) With residual pressure exhaust Speed exhaust controller Pilot with built-in check valve Tamper proof Tamper proof dual Flat head screw adjustment Flat head screw adjustment dual P.157 TPH TPS Standardised Front matter

28 1

29 Pneumatic Piping Equipment One-touch Fittings S Couplers Speed Controller with One-touch Fittings Tubing

30 One-touch Fittings tubing diameter: Metric Size Connecting : M, R, Rc KQ:White body Tubing Tubing material Tubing outside O.D. Nylon, Soft Nylon, Polyurethane ø., ø, ø, ø, ø, ø, ø1 Color Series Series KQ Series KQ Body White Black Release button Light gray Blue KQ:Black body Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Thread Sealant (Thread portion) Mounting Nut Air, Water Note 1) 1.0 MPa 0 kpa.0 MPa 5 to 0 C, In case of water: 0 to 0 C (No freezing) JIS B00 (Taper for piping) JIS B009, Class (Metric coarse ) JIS B011, Class (Metric fine ) With / Without sealant Note 1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Series KQ: White body Series KQ : Black body Guide Collet Chuck to nylon and polyurethane Large retaining force Secure engagement with chuck and large retaining force with collet. Release button Series KQ: Light gray Series KQ : Blue Requires little force for removal Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. Packing Compatible with a wide range of pressure, from low vacuum to 1.0 MPa. The special shape ensures sealing and reduces resistance in tubing insertion. Thread M, R, Rc Body O-ring Stud Tubing Effective for piping in confined space The body and portion can be rotated. (For positioning) PAT. Refer to Best Pneumatics 00 Vol.15 for the inch size.

31 One-touch Fitting Fittings Tubing Female hole Tubing Tubing Tubing Male KQ /KQ KQH Male connector KQS Hexagon socket head male connector KQL Male elbow KQH Straight union KQE Bulkhead union KQL Union elbow KQLE Bulkhead male elbow KQT Different dia. tee KQU Different dia. union "Y" KQUD Different dia. double union "Y" KQLU Branch union elbow KQF Female connector KQE Bulkhead connector KQLF Female elbow KQVF Universal female elbow KQZF Branch universal female elbow Accessories KJ KS /KX KC KM KB KDM DM DMK KQK 5 Male elbow KQW Extended male elbow KQV Universal male elbow KQVS Hexagon socket head universal male elbow KQT Male branch tee KQY Male run tee KQVT Triple universal male elbow KQLU Branch union elbow KQZ Branch universal male elbow KQZD Double branch universal male elbow KQZT Triple branch universal male elbow KQUD Delta branch KQT Union tee KQU Union "Y" KQH Different dia. straight KQT Different dia. tee Tubing KQL Plug-in elbow KQW Extended plug-in elbow KQD Delta union KQTW Cross KQTX Different dia. cross KQTY Different dia. cross KQU Plug-in "Y" KQX Different dia. plug-in "Y" One-touch fittings KQP Plug KQN Nipple KQN Different dia. nipple KQN Adapter KQC Tube cap KQC Collar cap KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KQU Union "Y" KQD Delta union KQR Plug-in reducer KQXD Double plug-in "Y" KFG H,DL, L,LL KQVD Double universal male elbow KQL Reducer elbow M MS LQ1 /LQ

32 Tubing Female hole One-touch Fittings Male Connector Most coon style used to pipe from female in the same direction. <M5, M> <R> Connecting. 1 M5 X 0. R1/ M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQH/KQH Release Button, Release Button KQH( Light gray ) KQH( Blue ) KQH-M5 KQH-M5-01S -01S -0S -0S KQH0-M5 KQH0-M5 -M -M -01S -01S -0S -0S KQH0-M5 KQH0-M5 -M -M -01S -01S -0S -0S -0S -0S KQH0-01S KQH0-01S -0S -0S -0S -0S KQH-01S KQH-01S -0S -0S -0S -0S -0S -0S KQH-0S KQH-0S -0S -0S -0S -0S KQH1-0S KQH1-0S -0S -0S Male Elbow Most coon style used to pipe from female at a right angle. <M5> <M> <R> Connecting M5 X 0.. R1/ M5 X 0. 1 M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQL/KQL KQL (White) KQL (Black) KQL-M5 KQL-M5-01S -01S -0S -0S KQL0-M5 KQL0-M5 -M -M -01S -01S -0S -0S KQL0-M5 KQL0-M5 -M -M -01S -01S -0S -0S -0S -0S KQL0-01S KQL0-01S -0S -0S -0S -0S KQL-01S KQL-01S -0S -0S -0S -0S -0S -0S KQL-0S KQL-0S -0S -0S -0S -0S KQL1-0S KQL1-0S -0S -0S Hexagon Socket Head Male Connector The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. 5 <M5, M> <R> 1 Connecting M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQS/KQS Release Button, Release Button KQS( Light gray ) KQS( Blue ) KQS0-M5 KQS0-M5 -M -M -01S -01S KQS0-M5 KQS0-M5 -M -M -01S -01S -0S -0S KQS0-01S KQS0-01S -0S -0S -0S -0S KQS-01S KQS-01S -0S -0S -0S -0S -0S -0S KQS-0S KQS-0S -0S -0S -0S -0S KQS1-0S KQS1-0S -0S -0S 5 Male Elbow For piping at 5 from female. Intermediate model between male connector and male elbow. <M5, M> <R> 1 Connecting M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQK/KQK KQK (White) KQK (Black) KQK0-M5 KQK0-M5 -M -M -01S -01S -0S -0S KQK0-M5 KQK0-M5 -M -M -01S -01S -0S -0S -0S -0S KQK0-01S KQK0-01S -0S -0S -0S -0S KQK-01S KQK-01S -0S -0S -0S -0S -0S -0S KQK-0S KQK-0S -0S -0S -0S -0S KQK1-0S KQK1-0S -0S -0S

33 Tubing Female hole One-touch Fittings Fittings Extended Male Elbow Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <M5> <R> <M5> <R> Connecting. 1 Universal Male Elbow M5 X 0. R1/ M5 X 0. M5 X 0. M5 X 0. R1/ M5 X 0. R1/ R1/ KQW/KQW KQW (White) KQW (Black) KQW-M5 KQW-M5-01S -01S -0S -0S KQW0-M5 KQW0-M5-01S -01S -0S -0S KQW0-M5 KQW0-M5-01S -01S -0S -0S -0S -0S KQW0-01S KQW0-01S -0S -0S -0S -0S KQW-0S KQW-0S -0S -0S -0S -0S KQW-0S KQW-0S -0S -0S -0S -0S KQW1-0S KQW1-0S -0S -0S KQV/KQV The hexagon head of the body is used to tighten the body with a box wrench in a confined space. 1 R1/ R1/ R1/ Connecting KQV (White) KQV (Black) KQV0-M5 KQV0-M5-01S -01S KQV0-M5 KQV0-M5-01S -01S -0S -0S KQV0-01S KQV0-01S -0S -0S -0S -0S KQV-0S KQV-0S -0S -0S KQV-0S KQV-0S -0S -0S KQV1-0S KQV1-0S -0S -0S Hexagon Socket Head Universal Male Elbow The hexagon socket in the head is used to tighten the body with a hexagon wrench. Useful in a confined space. <M5> <R> Male Branch Tee Connecting M5 X 0. R1/ M5 X 0. KQVS/KQVS KQVS (White) KQVS (Black) KQVS0-M5 KQVS0-M5-01S -01S KQVS0-M5 KQVS0-M5-01S -01S -0S -0S KQVS0-01S KQVS0-01S -0S -0S -0S -0S KQVS-0S KQVS-0S -0S -0S KQVS-0S KQVS-0S -0S -0S KQT/KQT To branch the line from the female at 90 in each direction. <M5> <M> <R> Connecting. 1 R1/ R1/ M5 X 0. R1/ M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQT (White) KQT (Black) KQT-M5 KQT-M5-01S -01S -0S -0S KQT0-M5 KQT0-M5 -M -M -01S -01S -0S -0S KQT0-M5 KQT0-M5 -M -M -01S -01S -0S -0S -0S -0S KQT0-01S KQT0-01S -0S -0S -0S -0S KQT-01S KQT-01S -0S -0S -0S -0S -0S -0S KQT-0S KQT-0S -0S -0S -0S -0S KQT1-0S KQT1-0S -0S -0S KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

34 Tubing Female hole One-touch Fittings Male Run Tee KQY/KQY To branch the line from the female in the same direction and at 90. Union "Y" To branch tubing in the same direction. KQU/KQU <M5, M> <R> Connecting. 1 M5 X 0. R1/ M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ R1/ KQY (White) KQY-M5-01S -0S KQY0-M5 -M -01S -0S KQY0-M5 -M -01S -0S -0S KQY0-01S -0S -0S KQY-01S -0S -0S -0S KQY-0S -0S -0S KQY1-0S -0S KQY (Black) KQY-M5-01S -0S KQY0-M5 -M -01S -0S KQY0-M5 -M -01S -0S -0S KQY0-01S -0S -0S KQY-01S -0S -0S -0S KQY-0S -0S -0S KQY1-0S -0S <M5, M> <R> Connecting. 1 M5 X 0. R1/ M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ KQU (White) KQU-M5-01S -0S KQU0-M5 -M -01S -0S KQU0-M5 -M -01S -0S -0S KQU0-01S -0S -0S KQU-0S -0S -0S KQU-0S -0S -0S KQU1-0S -0S KQU (Black) KQU-M5-01S -0S KQU0-M5 -M -01S -0S KQU0-M5 -M -01S -0S -0S KQU0-01S -0S -0S KQU-0S -0S -0S KQU-0S -0S -0S KQU1-0S -0S Double Universal Male Elbow KQVD/KQVD To branch the line from the female at right angles. individual parts rotate freely. Connecting R1/ R1/ R1/ KQVD (White) KQVD (Black) KQVD0-01S KQVD0-01S -0S -0S -0S -0S KQVD0-01S KQVD0-01S -0S -0S -0S -0S KQVD0-01S KQVD0-01S -0S -0S -0S -0S -0S -0S KQVD-0S KQVD-0S -0S -0S -0S -0S KQVD-0S KQVD-0S -0S -0S -0S -0S Triple Universal Male Elbow To branch line from the female into directions at right angles. individual parts rotate freely. Connecting R1/ R1/ R1/ KQVT/KQVT KQVT (White) KQVT (Black) KQVT0-01S KQVT0-01S -0S -0S -0S -0S KQVT0-01S KQVT0-01S -0S -0S -0S -0S KQVT0-01S KQVT0-01S -0S -0S -0S -0S -0S -0S KQVT-0S KQVT-0S -0S -0S -0S -0S KQVT-0S KQVT-0S -0S -0S -0S -0S 7

35 Tubing Female hole One-touch Fittings Fittings Branch Union Elbow KQLU/KQLU Double Branch Universal Male Elbow KQZD/KQZD KQ /KQ To branch tubing at a right angle from the female. <M5, M> <R> Connecting M5 X 0. M X 1 R1/ M5 X 0. M X 1 Branch Universal Male Elbow KQLU (White) KQLU (Black) KQLU0-M5 KQLU0-M5 -M -M -01S -01S -0S -0S KQLU0-M5 KQLU0-M5 -M -M -01S -01S -0S -0S -0S -0S KQLU0-01S KQLU0-01S -0S -0S -0S -0S KQLU-0S KQLU-0S -0S -0S -0S -0S KQLU-0S KQLU-0S -0S -0S -0S -0S The hexagon head of the body is used to tighten the body with a box wrench. Used to branch the line. Elbow union for piping. <M5> <R> R1/ R1/ Connecting M5 X 0. R1/ R1/ R1/ KQZ/KQZ KQZ (White) KQZ (Black) KQZ0-M5 KQZ0-M5-01S -01S KQZ0-01S KQZ0-01S -0S -0S -0S -0S KQZ0-01S KQZ0-01S -0S -0S -0S -0S KQZ-0S KQZ-0S -0S -0S KQZ-0S KQZ-0S -0S -0S To branch the line from the female into tubes at right angles. individual parts rotate freely. Connecting KQZD (White) KQZD (Black) R1/ R1/ R1/ KQZD0-01S -0S -0S KQZD0-01S -0S -0S KQZD0-01S KQZD0-01S -0S -0S KQZD0-01S -0S -0S KQZD0-01S -0S -0S -0S -0S -0S KQZD-0S -0S -0S KQZD-0S -0S -0S -0S KQZD-0S -0S -0S KQZD-0S -0S -0S Triple Branch Universal Male Elbow To branch the line from the female into tubes at right angles. individual parts rotate freely. Connecting R1/ R1/ R1/ KQZT/KQZT KQZT (White) KQZT (Black) KQZT0-01S KQZT0-01S -0S -0S -0S -0S KQZT0-01S KQZT0-01S -0S -0S -0S -0S KQZT0-01S KQZT0-01S -0S -0S -0S -0S -0S -0S KQZT-0S KQZT-0S -0S -0S -0S -0S KQZT-0S KQZT-0S -0S -0S -0S -0S KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

36 Tubing Female hole One-touch Fittings Double Branch KQUD/KQUD To branch the line from the female into tubes in the same direction. Connecting KQUD (White) KQUD (Black) R1/ KQUD0-01S KQUD0-01S -0S -0S R1/ KQUD0-01S KQUD0-01S -0S -0S Delta Union KQD/KQD To branch the line from the female into directions at right angles. <M5, M> <R> Connecting M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ KQD (White) KQD0-M5 -M -01S -0S KQD0-M5 -M -01S -0S -0S KQD0-01S -0S -0S KQD-0S -0S -0S KQD-0S -0S -0S KQD (Black) KQD0-M5 -M -01S -0S KQD0-M5 -M -01S -0S -0S KQD0-01S -0S -0S KQD-0S -0S -0S KQD-0S -0S -0S 9

37 Tubing Tubing One-touch Fittings Fittings Straight Union To connect tubings in the same direction. Bulkhead Union. 1 To connect tubing through a panel. Union Elbow KQH/KQH KQH (White) KQH (Black) KQH-00 KQH-00 KQH0-00 KQH0-00 KQH0-00 KQH0-00 KQH0-00 KQH0-00 KQH-00 KQH-00 KQH-00 KQH-00 KQH1-00 KQH1-00 KQE/KQE Release button, KQE( ) KQE( Release button Light gray Blue ) KQE-00 KQE-00 KQE0-00 KQE0-00 KQE0-00 KQE0-00 KQE0-00 KQE0-00 KQE-00 KQE-00 KQE-00 KQE-00 KQE1-00 KQE1-00 To connect tubing at right angles to each other. KQL/KQL KQL (White) KQL (Black) KQL-00 KQL-00 KQL0-00 KQL0-00 KQL0-00 KQL0-00 KQL0-00 KQL0-00 KQL-00 KQL-00 KQL-00 KQL-00 KQL1-00 KQL1-00 Bulkhead Male Elbow KQLE/KQLE To connect tubings through a panel and change the tubing entry by 90. Union Tee KQLE (White) KQLE (Black) KQLE0-00 KQLE0-00 KQLE0-00 KQLE0-00 KQLE0-00 KQLE0-00 KQLE-00 KQLE-00 KQLE-00 KQLE-00 KQT/KQT To branch tubing into directions each at 90 to the original one. Union "Y". 1 To branch tubing in the same direction.. 1 Different Dia. Straight To connect tubings of different diameters. KQT (White) KQT (Black) KQT-00 KQT-00 KQT0-00 KQT0-00 KQT0-00 KQT0-00 KQT0-00 KQT0-00 KQT-00 KQT-00 KQT-00 KQT-00 KQT1-00 KQT1-00 KQU/KQU KQU (White) KQU (Black) KQU-00 KQU-00 KQU0-00 KQU0-00 KQU0-00 KQU0-00 KQU0-00 KQU0-00 KQU-00 KQU-00 KQU-00 KQU-00 KQU1-00 KQU1-00 KQH/KQH KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF a b a. b 1 KQH (White) KQH (Black) KQH-0 KQH-0 KQH0-0 KQH0-0 KQH0-0 KQH0-0 KQH0- KQH0- KQH- KQH- KQH-1 KQH-1 KFG H,DL, L,LL M MS LQ1 /LQ

38 Tubing Tubing One-touch Fittings Different Dia. Tee KQT/KQT To branch the tubing into two at a right angle and reduce the resulting branches in size. - a b a. Different Dia. Tee b 1 KQT (White) KQT (Black) KQT-0 KQT-0 KQT0-0 KQT0-0 KQT0-0 KQT0-0 KQT0- KQT0- KQT- KQT- KQT-1 KQT-1 KQT To connect tubing in the same direction as well as to branch it into another smaller tubing at a b a b Different Dia. Union "Y" KQT (White) KQT0-0 KQT0-0 KQT-0 KQT- KQU/KQU To branch tubing into smaller tubes in the same direction as the original one. a a b a. b 1 Different Dia. Double Union "Y" KQU (White) KQU (Black) KQU-0 KQU-0 KQU0-0 KQU0-0 KQU0-0 KQU0-0 KQU0- KQU0- KQU- KQU- KQU-1 KQU-1 KQUD/KQUD To branch tubing into smaller tubes in the same direction as the original one. - a b a b KQT (Black) is manufactured as a made to order. KQUD (White) KQUD (Black) KQUD0-0 KQUD0-0 KQUD0-0 KQUD0-0 Branch Union Elbow To branch a tube at a right angle into two tubes. Delta Union KQLU/KQLU KQLU (White) KQLU (Black) KQLU0-00 KQLU0-00 KQLU0-00 KQLU0-00 KQLU0-00 KQLU0-00 KQLU-00 KQLU-00 KQLU-00 KQLU-00 KQD/KQD To connect tubes at right angles with each other. Cross To branch tubing into directions. Different Dia. Cross KQD (White) KQD (Black) KQD0-00 KQD0-00 KQD0-00 KQD0-00 KQD0-00 KQD0-00 KQD-00 KQD-00 KQD-00 KQD-00 KQTW KQTW (White) KQTW0-00 KQTW0-00 KQTW0-00 KQTW-00 KQTW-00 This model is not available with black body specifications. KQTX To connect tubes at right angles with smaller tubes on both sides. a a b KQTX (White) This model is KQTX0-0 not available b b KQTX0- with black body a specifications. KQTX- Different Dia. Cross KQTY To branch tubing into smaller tubing in directions. b a b KQTY (White) This model is KQTY0-0 not available with black body KQTY0- specifications. - a KQTY- 11

39 Tubing One-touch fittings One-touch Fittings Fittings Plug-in Elbow KQL/KQL To change the tubing direction from a one-touch fitting by Extended Plug-in Elbow Fitting size KQL (White) KQL (Black). 1 KQL-99 KQL0-99 KQL0-99 KQL0-99 KQL-99 KQL-99 KQL1-99 KQL-99 KQL0-99 KQL0-99 KQL0-99 KQL-99 KQL-99 KQL1-99 KQW/KQW To change the tubing direction from a one-touch fitting by 90. to dimensional piping when used with a plug-in elbow.. Plug-in Reducer To connect to a smaller one-touch fitting. Fitting size KQW (White) KQW (Black). KQW-99 KQW0-99 KQW0-99 KQW0-99 KQW-99 KQW-99 KQW-99 KQW0-99 KQW0-99 KQW0-99 KQW-99 KQW-99 KQR/KQR Fitting size KQR (White) KQR (Black). KQR-0 KQR KQR0-0 KQR-0 KQR KQR KQR0- KQR- KQR0- KQR KQR-1 KQR-1 Reducer Elbow KQL/KQL To change the tubing direction from a one-touch fitting by 90 as well as to connect to tubing of a smaller diameter. Plug-in "Y". Fitting size KQL (White) KQL (Black) 1 KQL-0 KQL KQL0-0 - KQL0- - KQL- KQL-1 KQL-0 KQL KQL0-0 - KQL0- - KQL- KQL-1 KQU/KQU To branch the line from a one-touch fitting into tubing in the same direction. Fitting size Different Dia. Plug-in "Y" KQU (White) KQU (Black) KQU-99 KQU-99 KQU0-99 KQU0-99 KQU0-99 KQU0-99 KQU0-99 KQU0-99 KQU-99 KQU-99 KQU-99 KQU-99 KQU1-99 KQU1-99 To branch the line from a one-touch fitting into tubing of a smaller diameter in the same direction. Fitting size Double Branch "Y" KQX/KQX KQX (White) KQX (Black) KQX0-0 KQX0-0 KQX0-0 KQX0-0 KQX0- KQX0- KQX- KQX- To branch the line from a one-touch fitting into tubes of a smaller diameter in the same direction. Fitting size KQXD/KQXD KQXD (White) KQXD (Black) KQXD0-0 KQXD0-0 KQXD0-0 KQXD0-0 KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

40 Tubing Male One-touch Fittings Female Connector KQF/KQF To pipe from the male ed portion of a pressure gauge, etc. 1 Connecting Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Bulkhead Female Connector Release button, Release button KQF( Light gray ) KQF( Blue ) KQF0-01 KQF KQF0-01 KQF KQF0-01 KQF KQF-0 KQF KQF-0 KQF KQF1-0 KQF KQE/KQE Used for trunk connection between tubing and a male installed through a panel. Connecting. Rc1/ Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc/ Rc1/ Rc/ 1 Rc1/ KQE( Release button, Release button Light gray ) KQE( Blue ) KQE-0 KQE-0 KQE0-01 KQE KQE0-01 KQE KQE0-01 KQE KQE-0 KQE KQE-0 KQE KQE1-0 KQE Female Elbow To pipe from the male ed at the right angle. <M5, M> <Rc> Connecting M5 X 0. M X 1 Rc1/ Rc1/ M5 X 0. M X 1 Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Universal Female Elbow KQLF/KQLF KQLF (White) KQLF (Black) KQLF0-M5 KQLF0-M5 -M -M KQLF0-M5 KQLF0-M5 -M -M KQLF0-01 KQLF KQLF-0 KQLF KQLF-0 KQLF KQVF/KQVF To connect a line from a male and female in the same direction as well as to branch it into pipes at a right angle. Multiplex connections possible. Connecting KQVF (White) KQVF (Black) M5 X 0. KQVF0-M5 KQVF0-M5 R/Rc1/ -01S -01S M5 X 0. KQVF0-M5 KQVF0-M5 <M5> R/Rc1/ R/Rc1/ -01S -0S -01S -0S R/Rc1/ KQVF0-01S KQVF0-01S R/Rc1/ -0S -0S R/Rc/ -0S -0S R/Rc1/ KQVF-0S KQVF-0S R/Rc/ -0S -0S <R, Rc> R/Rc/ KQVF-0S KQVF-0S R/Rc1/ -0S -0S Branch Universal Female Elbow KQZF/KQZF To branch a line from a male or female in the same direction and at a right angle. Multiplex connections possible. 1 <M5> <R, Rc> Connecting M5 X 0. R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc/ R/Rc/ R/Rc1/ KQZF (White) KQZF (Black) KQZF0-M5 KQZF0-M5-01S -01S KQZF0-01S KQZF0-01S -0S -0S KQZF0-01S KQZF0-01S -0S -0S KQZF-0S KQZF-0S -0S -0S KQZF-0S KQZF-0S -0S -0S

41 Accessory One-touch Fittings Fittings Plug KQP/KQP Tubing Cap KQC/KQC KQ /KQ To plug unused one-touch fittings KQP (White), KQP (Blue). To plug unused tubing. KJ fitting size. 1 KQP (White) KQP (Black) KQP- KQP- KQP-0 KQP-0 KQP-0 KQP-0 KQP-0 KQP-0 KQP- KQP- KQP- KQP- KQP-1 KQP-1 1 KQC (White) KQC (Black) KQC0-00 KQC0-00 KQC0-00 KQC0-00 KQC0-00 KQC0-00 KQC-00 KQC-00 KQC-00 KQC-00 KQC1-00 KQC1-00 KS /KX KC KM KB Nipple To connect one-touch fittings. Different Dia. Nipple KQN/KQN fitting size KQN (White) KQN (Black) 1 KQN0-99 KQN0-99 KQN0-99 KQN-99 KQN-99 KQN1-99 KQN0-99 KQN0-99 KQN0-99 KQN-99 KQN-99 KQN1-99 KQN/KQN To connect one-touch fittings of different sizes. a b fitting size a b KQN (White) KQN (Black) 1 KQN0-0 KQN0-0 KQN0- KQN- KQN-1 KQN0-0 KQN0-0 KQN0- KQN- KQN-1 Color Cap Attached to release buttons for various applications to distinguish them by colour.. 1 KQC-01 KQC-01A- KQC-01B- KQC-0 KQC-0A- KQC-0B- KQC-0 KQC-0A- KQC-0B- KQC-0 KQC- KQC- KQC-1 KQC Application Other than below KQH, KQH-M5 KQL, KQL-M5 KQT, KQT-M5 KQY, KQY-M5 Other than below KQH, KQH0-M5, M KQS, KQS0-M5, M KQL, KQL0-M5, M KQT, KQT0-M5, M KQY, KQY0-M5, M Other than below KQH, KQH0-M5, M KQS, KQS0-M5, M KQL, KQL0-M5, M KQT, KQT0-M5, M KQY, KQY0-M5, M B (Black), R (Red), YR (Orange), BR (Brown), Y (Yellow), G (Green), CB (Sky blue), GR (Grey), W (White), BU (Blue) KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH Adapter KQN/KQN KKA To connect a one-touch fitting and R female. KF fitting size Connecting KQN (White) KQN (Black) KFG M5 X 0. R1/ M5 X 0. R1/ KQN0-M5-01S KQN0-M5-01S -0S KQN0-0S -0S KQN-0S KQN0-M5-01S KQN0-M5-01S -0S KQN0-0S -0S KQN-0S H,DL, L,LL M MS 1 LQ1 /LQ

42 Made to Order Electroless Nickel Plated on Brass Parts (Example) KQH0-0S-X X Made to Order Lubricant: Vaseline (Example) KQH0-0S-X X Electroless Nickel Plating on Brass Parts (X) Lubricant: Vaseline (X) (Example) KQH0-0S-X1 X1 Electroless Nickel Plating on Brass Parts (X) Seal, O-ring: Fluororesin Rubber (Example) KQH0-0S-X7 No Lubrication (Example) KQH0-0S-X57 X7 X57 Seal: Fluororesin Coating Oil Free: No Lubrication (Example) KQH0-0S-X17 Electroless Nickel Plating on Brass Parts (X) Seal: Fluororesin Coating Oil Free: No Lubrication (X17) (Example) KQH0-0S-X9 X17 X9 Clean Series Electroless nickel plating on brass parts (X) Lubricant: Fluororesin grease Double packaging Resin bodyrelease button: White (Example) -KQH0-0S - 15

43 1

44 One-touch Fittings : Metric Size Connecting : G The seal gasket on the male for piping eliminates the need for pipe tape Tubing Tubing material Tubing O.D. Note 1) The soft nylon tube is not available with water. FEP,PFA, Nylon, Soft nylon (Note1), Polyurethane ø, ø, ø, ø, ø, ø1 Male Gasket Female G G A gasket made of a stainless sheet covered with laminated NBR on both sides is seated on the female for a perfect sealing construction irrespective of the variations in tolerance. Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Thread Mounting Nut Air, Water Note ) 1.0 MPa Note ) 0 kpa.0 MPa 5 to 0 C, In case of water: 0 to 0 C (No freezing) JIS B007 (EN ISO) JIS B011, Class (Metric fine ) Note ) The surge pressure must be under the maximum operating pressure. Note ) The amount of leakage is not zero, and so the use for holding vacuum such as a leak tester should be avoided. Product s Color Series Body Release button Series KQ White Light grey One-touch connection and release. Possible to use in vacuum to -0 kpa. The male for piping drastically cuts piping manhours. Suitable for use with port s conforming to ISO1179 and ISO0. Principal Parts Material Stud Body Stud Chuck Guide Collet, Release button Seal, O-ring Gasket Seal Can be used for a wide range of pressures from a low vacuum up to a pressure of 1.0 MPa The use of a special profile ensures sealing and reduces resistance when the tube is inserted. G Body O-ring Effective when piping in a confined space. The body and the ed portion can rotate (To the degree for positioning) Gasket C0BD, PBT C0BD (Thread portion) Stainless steel 0 Stainless steel 0, C0BD, PBT POM NBR Stainless steel 0, NBR Chuck Large retaining force Has large retaining force while holding force is increased by the collet. Collet Guide Tube Release button (Light grey) Light force for removal When the fitting is removed from the tube, the check and collet are released, thus preventing them from biting into the tube excessively. 17

45 One-touch Fitting with G Type Connection Threads Fittings Tubing KQH Male connector KQS Hexagon socket head male connector Female hole KQW Extended male elbow KQV Universal male elbow KQT Male branch tee KQY Male run tee Tubing KQF Female connector KQE Bulkhead connector Male KQ /KQ KJ KS /KX KC KM KB KQL Male elbow KDM DM DMK KQG KG G One-touch Fittings KP KPQ /KPG Male Connector Most coon style used to pipe from female in the same direction. <G> Connecting G1/ G1/ G1/ G1/ G/ G1/ G1/ G/ G1/ G1/ G/ G1/ G1/ G/ G1/ G/ 1 G1/ KQH KQH KQH0-G01 -G0 KQH0-G01 -G0 -G0 KQH0-G01 -G0 -G0 KQH-G01 -G0 -G0 -G0 KQH-G0 -G0 -G0 KQH1-G0 -G0 Hexagon Socket Head Male Connector The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. <G> Connecting G1/ G1/ G1/ G1/ G1/ G/ G1/ G1/ G/ G1/ G1/ G/ G1/ G/ 1 G1/ KQS KQS KQS0-G01 KQS0-G01 -G0 KQS0-G01 -G0 -G0 KQS-G01 -G0 -G0 -G0 KQS-G0 -G0 -G0 KQS1-G0 -G0 1 KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

46 G One-touch Fittings Male Elbow KQL Most coon style used to pipe from female at a right angle. Extended Male Elbow KQW Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <G> Connecting G1/ G1/ G1/ G1/ G/ G1/ G1/ G/ G1/ G1/ G/ G1/ G1/ G/ G1/ G/ 1 G1/ KQL KQL0-G01 -G0 KQL0-G01 -G0 -G0 KQL0-G01 -G0 -G0 KQL-G01 -G0 -G0 -G0 KQL-G0 -G0 -G0 KQL1-G0 -G0 <G> Connecting G1/ G1/ G1/ G1/ G/ G1/ G1/ G/ G1/ G/ G1/ G1/ G/ G1/ G/ 1 G1/ KQW KQW0-G01 -G0 KQW0-G01 -G0 -G0 KQW0-G01 -G0 -G0 KQW-G0 -G0 -G0 KQW-G0 -G0 -G0 KQW1-G0 -G0 Universal Male Elbow KQV The hexagon head of the body is used to tighten the body with a box wrench in a confined space. Male Branch Tee KQT To branch the line from the female at 90 in each direction. <G> Connecting G1/ G1/ G1/ G1/ G1/ G/ G1/ G/ G/ G1/ G/ 1 G1/ KQV KQV0-G01 KQV0-G01 -G0 KQV0-G01 -G0 -G0 KQV-G0 -G0 KQV-G0 -G0 KQV1-G0 -G0 <G> Connecting G1/ G1/ G1/ G1/ G/ G1/ G1/ G/ G1/ G1/ G/ G1/ G1/ G/ G1/ G/ 1 G1/ KQT KQT0-G01 -G0 KQT0-G01 -G0 -G0 KQT0-G01 -G0 -G0 KQT-G01 -G0 -G0 -G0 KQT-G0 -G0 -G0 KQT1-G0 -G0 19

47 G One-touch Fittings Fittings Male Run Tee KQY Female Connector KQF KQ /KQ To branch the line from the female in the same direction and at 90. To pipe from the male ed portion of a pressure gauge, etc. KJ Connecting KQY Connecting KQF KS /KX G1/ G1/ G1/ G1/ G/ KQY0-G01 -G0 KQY0-G01 -G0 -G0 G1/ G1/ G1/ G1/ G/ KQF0-G01 -G0 KQF0-G01 -G0 -G0 KC KM <G> 1 G1/ G1/ G1/ G1/ G/ G1/ G1/ G/ G1/ G/ G1/ KQY0-G01 -G0 -G0 KQY-G01 -G0 -G0 -G0 KQY-G0 -G0 -G0 KQY1-G0 -G0 1 G1/ G1/ G/ G1/ G/ G1/ G/ G1/ G/ G1/ KQF0-G01 -G0 -G0 KQF-G0 -G0 KQF-G0 -G0 -G0 KQF1-G0 -G0 KB KDM DM DMK KQG KG Bulkhead Female Connector KQE Spare Parts List KP Used for trunk connection between tubing and a male installed through a panel. Connecting G1/ G1/ G1/ G1/ G/ G1/ G1/ G/ G1/ G/ G/ G1/ KQE KQE0-G01 -G0 KQE0-G01 -G0 -G0 KQE0-G01 -G0 -G0 KQE-G0 -G0 KQE-G0 -G0 Description Gasket Nut for Tube Part no. KQ-G01 KQ-G0 KQ-G0 KQ-G0 KQ0-P01 KQ0-P01 KQ0-P01 KQ-P01 KQ-P01 KQ1-P01 Thread G1/ G1/ G/ G1/ KQE0-G** KQE0-G** KQE0-G** KQE-G** KQE-G** KQE1-G** KPQ /KPG KA KR KRM KK KKH 1 G/ G1/ KQE1-G0 -G0 KKA KF KFG H,DL, L,LL M MS 0 LQ1 /LQ

48 Uni One-touch Fittings : Metric Size Connecting : Rc, G, NPT, NPTF New-stand male for piping that reduces the screw-in time by 1/. Tubing Tubing material Tubing O.D. Note 1) Soft nylon tubing is not compatible with water. FEP, PFA, Nylon, Soft nylon (1), Polyurethane ø, ø, ø, ø, ø, ø1 Uni Gasket Female,, Uni ridge shape A gasket made of a stainless sheet covered with laminated NBR on both sides is seated on the chamfer of a female for a perfect sealing construction irrespective of the difference in diameters due to the difference in the types of female s, variation in tolerance, or difference in the size of chamfer. (It is applicable to any female with an ordinary chamfer.) A ridge shape has been created as a Uni for coon applications for Rc, G, NPT and NPTF. The male for piping drastically cuts piping manhours. Product s Color Specifications Fluid Air/Water () Operating pressure range () 0 kpa to 1 MPa Proof pressure MPa Ambient and fluid temperature 5 to 0 C, Water: 0 to 0 C (No freezing) Note ) The surge pressure must be under the maximum operating pressure. Note ) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Seal Series Body Release button Series KQ White Light gray Series KQ Black Blue Principal Parts Material Body Stud Chuck Guide Collet, Release button Seal, O-ring Gasket Can be used for a wide range of pressures from a low vacuum up to a pressure of 1 MPa The use of a special profile ensures sealing and reduces resistance when the tube is inserted. Body O-ring C0, PBT C0 (Thread portion) Stainless steel 0 Stainless steel 0, C0, PBT POM NBR Stainless steel 0, NBR Chuck Large retaining force Has large retaining force while holding force is increased by the collet. Collet Guide Stud Effective when piping in a confined space. The body and the ed portion can rotate. (To the degree for positioning) Gasket Uni Tube Release button Light force for removal When the fitting is removed from the tube, the check and collet are released, thus preventing them from biting into the tube excessively. 1

49 Uni One-touch Fitting Fittings Tubing KQH Male connector KQS Hexagon socket head male connector Female hole KQW Extended male elbow KQV Universal male elbow KQT Male branch tee KQY Male run tee KQK 5 male elbow KQU Branch Y KQ /KQ KJ KS /KX KC KM KB KQL Male elbow KDM DM DMK KQG KG UNI One-touch Fittings KP KPQ /KPG Male Connector KQH Most coon style used to pipe from female in the same direction. Hexagon Socket Head Male Connector KQS The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. KA KR <Uni> Connecting 1/ 1/ 1/ 1/ / 1/ 1/ / 1/ 1/ / 1/ 1/ / 1/ / 1 1/ KQH KQH0-U01 -U0 KQH0-U01 -U0 -U0 KQH0-U01 -U0 -U0 KQH-U01 -U0 -U0 -U0 KQH-U0 -U0 -U0 KQH1-U0 -U0 <Uni> Connecting 1/ 1/ 1/ 1/ 1/ / 1/ 1/ / 1/ 1/ / 1/ KQS KQS0-U01 KQS0-U01 -U0 KQS0-U01 -U0 -U0 KQS-U01 -U0 -U0 -U0 KQS-U0 -U0 -U0 KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

50 UNI One-touch Fittings Male Elbow KQL Most coon style used to pipe from female at a right angle. Extended Male Elbow KQW Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <Uni> Connecting 1/ 1/ 1/ G1/ / 1/ 1/ / 1/ 1/ / 1/ 1/ / 1/ / 1 1/ KQL KQL0-U01 -U0 KQL0-U01 -U0 -U0 KQL0-U01 -U0 -U0 KQL-U01 -U0 -U0 -U0 KQL-U0 -U0 -U0 KQL1-U0 -U0 <Uni> Connecting 1/ 1/ 1/ 1/ / 1/ 1/ / 1/ / 1/ 1/ / 1/ KQW KQW0-U01 -U0 KQW0-U01 -U0 -U0 KQW0-U01 -U0 -U0 KQW-U0 -U0 -U0 KQW-U0 -U0 -U0 Universal Male Elbow KQV The hexagon head of the body is used to tighten the body with a box wrench in a confined space. Male Branch Tee KQT To branch the line from the female at 90 in each direction. <Uni> Connecting 1/ 1/ 1/ 1/ 1/ / 1/ / / 1/ KQV KQV0-U01 KQV0-U01 -U0 KQV0-U01 -U0 -U0 KQV-U0 -U0 KQV-U0 -U0 <Uni> Connecting 1/ 1/ 1/ 1/ / 1/ 1/ / 1/ 1/ / 1/ 1/ / 1/ / 1 1/ KQT KQT0-U01 -U0 KQT0-U01 -U0 -U0 KQT0-U01 -U0 -U0 KQT-U01 -U0 -U0 -U0 KQT-U0 -U0 -U0 KQT1-U0 -U0

51 UNI One-touch Fittings Fittings Male Run Tee KQY Branch "Y" KQU KQ /KQ To branch the line from the female in the same direction and at 90. To branch tubing in the same direction. KJ Connecting KQY Connecting KQU KS /KX 1/ 1/ 1/ 1/ / KQY0-U01 -U0 KQY0-U01 -U0 -U0 1/ 1/ 1/ 1/ / KQU0-U01 -U0 KQU0-U01 -U0 -U0 KC KM 1/ 1/ / KQY0-U01 -U0 -U0 1/ 1/ / KQU0-U01 -U0 -U0 KB <Uni> 1 1/ 1/ / 1/ 1/ / 1/ / 1/ KQY-U01 -U0 -U0 -U0 KQY-U0 -U0 -U0 KQY1-U0 -U0 <Uni> 1/ / 1/ 1/ / 1/ KQU-U0 -U0 -U0 KQU-U0 -U0 -U0 KDM DM DMK KQG KG 5 Male Elbow KQK For piping at 5 from female. Intermediate model between male connector and male elbow. Connecting 1/ 1/ KQK KQK0-U01 -U0 Spare Parts List Description Gasket Part no. KQ-U01 KQ-U0 KQ-U0 KQ-U0 Thread Uni 1/ Uni 1/ Uni / Uni 1/ KP KPQ /KPG KA 1/ 1/ / KQK0-U01 -U0 -U0 KR <Uni> 1/ 1/ / 1/ 1/ / 1/ KQK0-U01 -U0 -U0 KQK-U01 -U0 -U0 -U0 KRM KK KKH 1/ / 1/ KQK-U0 -U0 -U0 KKA Made to Order Made to Order KF Electroless Nickel Plated on Brass Parts (Example) KQH0-U0-X X Lubricant: Vaseline (Example) KQH0-U0-X X With fixed throttle (Example) KQH0-U0-X1 X1 KFG H,DL, L,LL Seal: Fluororesin Coating Copper-free: Whith electroless nickel plated (Example) KQH0-U0-X17 X17 Electroless Nickel Plating on Brass Parts (X) Seal: Fluororesin Coating Oil Free: No Lubrication (X17) (Example) KQH0-U0-X9 X9 Seal: Fluororesin Coating Clean (Copper-free, air blow, duble package, resin body: white) (Example) KQH0-U0-X9 X9 M MS LQ1 /LQ

52 One-touch Mini : Metric Size Connecting : M, M5, R1/ Outside diameter reduced by 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring copper-free material. (Electroless nickel plating) Compatible with vacuum to 0 kpa of pressure. ø tubing type is newly added. KJ ø KJ ø., ø, ø Tubing Tubing material Note1) Tubing O.D. Note 1) ø is available in polyurethane only. Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Thread Thread label (Standard) Chuck Packing Gasket Guide to nylon and polyurethane. Large retaining force. Secure engagement and large retaining force with chuck. Compatible with low vacuum to 1.0 MPa of pressure. The special shape ensures sealing and reduces resistance of tubing insertion. Mounting Nut For application requiring copper-free material (Standard) Guide 1 Stud Nylon, Soft nylon, Polyurethane O-ring ø, ø., ø, ø Air, Water Note1) 1.0 MPa 0 kpa.0 MPa 5 to 0 C, In case of water: 0 to 0 C (No freezing) JIS B00 (Taper for piping) JIS B009, Class (Metric coarse ) JIS B011, Class (Metric fine ) With sealant Brass parts are all electroless nickel plated. Note 1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Release bush (Light grey) Requires little force for removal. Releases the chuck to remove the tubing. Prevents the chuck from biting too deeply into the tubing. Tubing removal is easier. Tubing Body (White) Enables piping in a narrower space. Body and can be rotated (For positioning). Electroless nickel plated. R1/ with sealant. PAT. Refer to Best Pneumatics 00 Vol.15 for the inch size. 5

53 One-touch Mini Fittings Tubing KJH Male connector Female hole Tubing Tubing Tubing KJH Straight union KJL Plug-in elbow One-touch fittings KQ /KQ KJ KS /KX KJS Hexagon socket head male connector KJE Bulkhead union KJL Union elbow KJR Reducer KJL Reducer elbow KC KM KB KJL Male elbow KJT Union tee KJU Plug-in "Y" KDM DM DMK KJW Extended male elbow KJU Union "Y" KJX Reducer union plug-in "Y" KQG KG KJH KJT Male branch tee KJY Male run tee Different dia. straight KJT Different dia. tee Tubing KJF Female connector Male KP KPQ /KPG KA KJU Branch "Y" KJU Different dia. union "Y" KJP Plug KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

54 Tubing Female hole Miniature One-touch Male Connector Most coon style used to pipe from female in the same direction. <M, M5> <R1/>. M x 0.5 M5 x 0. M x 0.5 M5 x 0. R1 M x 0.5 M5 x 0. R1 M5 x 0. R1 Hexagon Socket Head Male Connector Connecting KJH0-M -M5 KJH-M -M5-01S KJH0-M -M5-01S KJH0-M5-01S The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. <M, M5> <R1/> Male Elbow. M x 0.5 M x 0.5 M5 x 0. M x 0.5 M5 x 0. R1 M5 x 0. R1 KJH KJS KJS0-M KJS-M -M5 KJS0-M -M5-01S KJS0-M5-01S Most coon style used to pipe from female at a right angle. <M, M5> <R1/> Branch "Y". M x 0.5 M5 x 0. M x 0.5 M5 x 0. R1 M x 0.5 M5 x 0. R1 M5 x 0. R1 To branch a tubing in the same direction. <M5> Connecting Connecting Connecting. M5 x 0. R1 M5 x 0. R1 M5 x 0. R1 KJL KJL0-M -M5 KJL-M -M5-01S KJL0-M -M5-01S KJL0-M5-01S KJU KJU-M5-01S KJU0-M5-01S KJU0-M5-01S Extended Male Elbow KJW Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <M, M5> <R1/>. Male Branch Tee M x 0.5 M5 x 0. M x 0.5 M5 x 0. R1 M x 0.5 M5 x 0. R1 M5 x 0. R1 KJW0-M -M5 KJW-M -M5-01S KJW0-M -M5-01S KJW0-M5-01S KJT To branch the line from the female at 90 in each direction. <M, M5> <R1/> Male Run Tee. M x 0.5 M5 x 0. M x 0.5 M5 x 0. R1 M x 0.5 M5 x 0. R1 M5 x 0. R1 KJT0-M -M5 KJT-M -M5-01S KJT0-M -M5-01S KJT0-M5-01S KJY To branch the line from the female in the same direction and at 90. <M, M5> <R1/> Connecting Connecting Connecting. M x 0.5 M5 x 0. M x 0.5 M5 x 0. R1 M x 0.5 M5 x 0. R1 M5 x 0. R1 KJY0-M -M5 KJY-M -M5-01S KJY0-M -M5-01S KJY0-M5-01S 7 <R1/>

55 Tubing Tubing Miniature One-touch Fittings Straight Union KJH Different Dia. Straight KJH KQ /KQ To connect tubing in the same direction. To connect tubing of different diameters. KJ. KJH0-00 KJH-00 KJH0-00 KJH0-00 a b a b.. KJH0- -0 KJH-0-0 KJH0-0 KS /KX KC KM Bulkhead Union To connect tubing through a panel.. KJE KJE0-00 KJE-00 KJE0-00 KJE0-00 Different Dia. Tee KJT To branch the tubing into two at a right angle and reduce the resulting branches in size. b - a a. b KJT-0 KJT0-0 KB KDM DM DMK KQG KG Union Elbow To connect tubing at right angles to each other. Union Tee.. KJL KJL-00 KJL0-00 KJL0-00 KJT To branch tubing into directions each at 90 to the original one. KJT0-00 KJT-00 KJT0-00 KJT a Different Dia. Union "Y" b. b.. KJU To branch tubing into smaller tubing in the same direction as the original one. Union "Y" a To branch tubing in the same direction. KJU0- -0 KJU-0 KJU0-0 KJU KJU0-00 KJU-00 KJU0-00 KJU0-00 KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

56 Tubing One-touch Fittings Miniature One-touch Plug-in Elbow KJL To change the tubing direction from a one-touch fitting by 90. Plug-in "Y" KJU To branch the line from a one-touch fitting into tubing in the same direction.. Aplicable fitting size. KJL-99 KJL0-99 KJL0-99 fitting size.. KJU-99 KJU0-99 KJU0-99 Plug-in Reducer To connect to a smaller one-touch fitting.. Aplicable fitting size KJR KJR0-0 KJR-0-0 KJR0-0 Reducer Union Plug-in "Y". KJX To branch the line from a one-touch fitting into smaller diameter in the same direction. fitting size KJX-0 KJX0-0 Reducer Elbow fitting size. KJL To change the tubing direction from a one-touch fitting by 90 as well as to connect to a tubing of a smaller diameter. KJL-0-0 KJL0-0 Plug To plug unused One-touch fittings. fitting size KJP KJP-0 Tubing Male Miniature One-touch Female Connector KJF To pipe from the male ed portion of a pressure gauge, etc. Connecting M X 0.5. M5 X 0. M X 0.5 M5 X 0. M5 X 0. KJF-M -M5 KJF0-M -M5 KJF0-M5 9

57 One-touch Mini Fittings Made to Order Seal, O-ring: Fluororesin Coating Oil Free: No Lubrication (Example) KJH0-01S-X17 No Lubrication (Example) KJH0-01S-X57 X17 X57 Made to Order Lubricant: Vaseline (Example) KJH0-01S-X X Clean Series Lubricant: Fluororesin grease Release button: White Double packaging (Example) -KJH0-01S - KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS 0 LQ1 /LQ

58 Rotary One-touch Fittings : Metric Size Connecting : M,R Rotary one-touch fittings for low-torque rotation. to oscillating and rotating sections of robots etc. For application requiring copper-free material (Electroless nickel plated) R1/ sealant is standardised. Tubing Tubing material Note1) Nylon, soft nylon, Polyurethane Tubing O.D. ø, ø, ø, ø, ø Note1) Take precautions regarding the maximum operating pressure with soft nylon and polyurethane. Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Thread Air 1.0 MPa 0 kpa.0 MPa 5 to 0 C (No freezing) JIS B00 (Taper for piping) JIS B009, Class (Metric coarse ) Male Elbow Rotating Torque / Allowable Number of Rotations Rotating torque N m Note1) ø 0.00 ø 0.0 ø 0.01 ø 0.00 Allowable number of rotations S -1 Series KS Series KX Note1) Rotating torque at a 0.5 MPa pressure. ø Male Connector PAT. Slide bearing Low-torque, low-friction operation with oil containing slide bearing. Rotary seal The special rotary seal minimizes rotating torque and friction. Holder Electroless nickel plating allows copper-free applications. Ball bearing The ball bearing ensures low-torque rotation. Stud Electroless nickel plating allows copper-free applications. Thread sealant is standardised. Series KS (Standard) Scraper Prevents chips from entering the bearing parts. Cassette Series KS: Blue Series KX: White The male connector is provided with a tubing rotation prevention mechanism. Series KX (High speed type) Rotary seal X ring shape minimizes friction while providing Ball bearing an excellent seal. Seal The ball bearing ensures is fire and shock proof low-torque rotation. fluorine rubber. It proves Stainless steel 0C improves against high friction heat corrosion resistance. in high speed rotation and longer life. Other specifications are same as those of series KS. Refer to Best Pneumatics 00 Vol.15 for the inch size. (The inch size is not applied to series KX.) 1

59 Standard Rotary One-touch Fittings Fittings Male Connector KSH Male Elbow KSL KQ /KQ Most coon style used to pipe from female in the same direction. Most coon style used to pipe from female at a right angle. KJ Connecting M5 X 0. M X 1 R1/ KSH0-M5 -M -01S Connecting M5 X 0. M X 1 R1/ KSL0-M5 -M -01S KS /KX KC <M5, M> <R> M5 X 0. M X 1 R1/ R1/ KSH0-M5 -M -01S -0S KSH0-01S -0S -0S KSH-0S -0S -0S KSH-0S -0S <M5, M> <R> M5 X 0. M X 1 R1/ R1/ KSL0-M5 -M -01S -0S KSL0-01S -0S -0S KSL-0S -0S -0S KSL-0S -0S KM KB KDM DM DMK KQG High speed type Rotary One-touch Fittings KG KP Male Connector Most coon style used to pipe from female in the same direction. <M5, M> <R> Connecting M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ KXH KXH0-M5 -M -01S KXH0-M5 -M -01S -0S KXH0-01S -0S -0S KXH-0S -0S -0S KXH-0S -0S Male Elbow Most coon style used to pipe from female at a right angle. <M5, M> <R> Connecting M5 X 0. M X 1 R1/ M5 X 0. M X 1 R1/ R1/ KXL KXL0-M5 -M -01S KXL0-M5 -M -01S -0S KXL0-01S -0S -0S KXL-0S -0S -0S KXL-0S -0S KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

60 Tube Coupler : Metric Size Connecting : M, R, Rc One-touch fitting with builtin self seal mechanism to prevent air exhaust when removing the tubing. Electroless nickel plated for copper-free applications. tubing Tubing material Tubing O.D. Specifications Fluid Max. operating pressure Proof pressure Ambient and fluid temperature Mounting Thread Nut Thread label (Standard) Copper-free specifications (Standard) Nylon, Soft Nylon, Polyurethane ø, ø, ø, ø, ø Air 1.0 MPa.0 MPa 5 to 0 C (No freezing) JIS B00 (Taper for piping) JIS B011, Class (Metric fine ) With sealant All brass parts with electroless nickel plated. Without tubing With tubing O-ring O-ring Retainer Spring Valve Built-in self seal mechanism. No air leakage even when the tubing is removed. Body Stopper Cushion Release button Guide Collet Chuck Tubing With sealant No need of a sealant tape. PAT. Stud Effective for piping in confined space. The body and portion rotate separately.

61 Tube Coupler Fittings Male Connector KCH Bulkhead Union KCE KQ /KQ For piping in the same direction from the female. <M5> <R> Male Elbow Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ KCH0-M5-01S KCH0-M5-01S -0S KCH0-01S -0S -0S KCH-0S -0S KCH-0S -0S To pipe from the female at the right angle. Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ KCL KCL0-M5-01S KCL0-M5-01S -0S KCL0-01S -0S -0S KCL-0S -0S KCL-0S -0S To connect tubing through a panel. One of ports has a check valve. Union Tee KCE0-00 KCE0-00 KCE0-00 KCE-00 KCE-00 KCT To branch tubing into directions each at 90 to the original one. Union "Y" To branch tubing in the same direction. Only branches have integral check valves. KCT0-00 KCT0-00 KCT0-00 KCT-00 KCT-00 KCU KCU0-00 KCU0-00 KCU0-00 KCU-00 KCU-00 KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK Straight Union To connect tubing in the same direction. One of ports has a check valve. KCH Check Adapter KCJ To be connected to a series KQ one-touch fitting to provide tube coupler function. KKH KKA KCH0-00 KCH0-00 KCH0-00 KCH-00 KCH-00 KCJ0-99 KCJ0-99 KCJ0-99 KCJ-99 KCJ-99 KF KFG H,DL, L,LL M MS LQ1 /LQ

62 Tube Coupler Straight Plug for Frequent Use To save tube cutting labor in cases where tubing is frequently connected and removed. To connect tubing in the same direction as the tube coupler. KCH KCH0-99 KCH0-99 KCH0-99 KCH-99 KCH-99 Bulkhead Female Union Used for trunk connection between tubing and a male installed through a panel. Connecting Rc1/ Rc1/ Rc/ Rc/ Rc/ KCE KCE0-0 KCE0-0 KCE0-0 KCE-0 KCE-0 Elbow Plug for Frequent Use KCL To save tube cutting labor in cases where tubing is frequently connected and removed. To connect a tubing at a right angle to the tube coupler. KCL0-99 KCL0-99 KCL0-99 KCL-99 KCL-99 5

63 One-touch Fittings Manifold : Metric Size Connecting : R, Rc Fittings KQ /KQ Compact piping possible. Centralized piping possible. Rich variation of 0 styles. One-touch installation. tubing Tubing material Tubing O.D. Specifications Nylon, Soft nylon, Polyurethane ø, ø, ø, ø, ø KM11 KM KM1 KM1 KM15 KM1 Fluid Max. operating pressure Proof pressure Ambient and fluid temperature Air, Water Note1) 1.0 MPa.0 MPa 5 to 0 C, In case of water: 0 to 0 C (No freezing) Thread Accessory No JIS B00 (Taper for piping) Hexagon socket head plug: 1 pc No JIS B00 (Taper for piping) No No No Note1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. KM11 Port A One-touch fitting Porting Port B One-touch fitting, KM One-touch fitting Rc female, KM1 One-touch fitting One-touch fitting KM1 KM15 One-touch fitting One-touch fitting One-touch fitting R male One-touch fitting rod Number of port A KM1 One-touch fitting One-touch fitting Port B Port size ø ø ø Rc1/ Rc/ ø ø ø ø, R1/ ø, ø, ø, R1/ ø, ø, ø, ø, ø, ø ø ø ø ø Port A port size ø ø ø KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

64 One-touch Fittings Manifold KM11 KM1 B A A A B Connecting A Rc1/ Rc1/ Rc/ Number of port A Number of port A KM KM KM KM KM KM KM A B tubing O.D. A B Connecting R1/ R1/ R1/ Number of port A KM S- -0S- -0S- KM S- -0S- -0S- KM S- -0S- -0S- KM1-0--0S- -0S- -0S- KM1-0--0S- -0S- -0S- KM15 B A A B KM1 Number of port A KM KM KM1-0-- A B tubing O.D. A B fitting size Number of port A KM KM KM KM1 B A A B Number of port A KM KM KM Made to Order Electroless Nickel Plated on Brass Parts (Example) KM-0-0--X X Made to Order Lubricant: Vaseline (Example) KM-0-0--X X Seal: Fluororesin Coating Oil Free: No Lubrication (Example) KM-0-0--X17 X17 No Lubrication (Example) KM-0-0--X57 X57 7

65 Piping Module : Metric Size Connecting : M, R, Rc Fittings KQ /KQ Centralized piping from main line. Enables centralization and distribution of piping suitable for each application. One-touch installation and removal with no need of tools. One-touch lock system enhances efficiency in piping work without requiring any tools. Air entry allows 0 changes. Universal construction allows changes in air entries even after piping is completed. Tubing Tubing material Nylon, Soft nylon, Polyurethane Tubing O.D. ø, ø, ø, ø, ø, ø1 Thread Size Male R1/,,, Female M5 x 0., M x 1, Rc1/, Rc1/, Rc/, Rc1/ Specifications Fluid Air Max. operating pressure 1.0 MPa Operating vacuum pressure 0 kpa Proof pressure.0 MPa Ambient and fluid temperature 5 to 0 C (No freezing) JIS B 00 (Taper for piping) Mounting Thread JIS B 009, Class (Metric coarse ) Nut JIS B 011, Class (Metric fine ) Thread label (Standard) With sealant Copper-free specifications (Standard) Brass parts are all electroless nickel plated. Component Material Body C0BD, PBT, POM Stud POM Lock ring POM Spring Stainless steel 0WPB Spring guide POM Stopper POM Thread C0BD Guide Stainless steel 0, C0BD, POM Collet, Release button POM Seal, O-ring NBR Chuck Stainless steel 0 KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM Plug: KBP Elbow Module: KBV Female Connector Union: KBH KK Lock ring Plug body Thread O-ring O-ring Release button Packing Stud Tubing Guide Chuck Collet Stopper screw Female connector body O-ring Male connector body KKH KKA KF KFG PAT. Spring Spring guide O-ring Universal elbow body O-ring Spring Spring guide O-ring Lockring H,DL, L,LL M MS LQ1 /LQ

66 Combination Examples Piping Module Component module No. of modulus Component module No. of modulus KBV-0 KBV-0 KBH-RS KBP pcs. 1 pc. 1 pc. KBE-0 KBV-0 KBV-0 KBE-0 KBN pcs. pcs. 1 pc. KBP KBN KBH-RS KBE-0 KBV-M5 Component module KBV-M5 KBH-RS KBP No. of modulus pcs. 1 pc. 1 pc. KBV1-0 KBV-0 Component module KBV-0 KBV1-0 KBR-1 KBH-RS KBP1 No. of modulus 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. KBP KBP1 KBR-1 KBH-RS KBH-RS Component module No. of modulus Component module No. of modulus KBV-0 KBV-0 KBL-RS KBP pcs. 1 pc. 1 pc. KBV-0 KBP1 KBV1-0 KBV-0 KBV1-0 KBR-1 KBH-RS KBP KBP1 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. KBP KBP KBL-RS KBD-1 KBH-RS KBV-0 Component module KBV-0 KBE-0 KBP No. of modulus pcs. 1 pc. 1 pc. Modules can be combined if they are of the same body size. To combine modules of different body sizes, use a different diameter module KBR for size conversion. KBP KBE-0 9

67 Air Output Port Piping Module Fittings Elbow Module KBV Branch Elbow Module KBZ KQ /KQ Body size 1 1 Elbow Socket Module Body size Connecting M5 X 0. M X 1 M5 X 0. M X 1 Rc1/ Rc1/ Rc/ KBV KBV-0-0 KBV-0 KBV- KBV- KBV- KBV-1 KBV KBV1-M5 KBV1-M KBV-M5 KBV-M KBV-R1 KBV-R1 KBV-R KBV-R KBV-R Body size 1 1 KBZ1-0 KBZ1-0 KBZ-0 KBZ- KBZ- KBZ- KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M 0 MS LQ1 /LQ

68 Air Supply Port Piping Module Female Connector Union KBH Male Connector Socket KBB Body size Connecting Body size Connecting 1 R1/ KBH1-R1S KBH-R1S KBH-RS KBH-RS KBH-RS KBH-RS KBH-RS KBH-RS KBH-RS 1 M5 X 0. M X 1 Rc1/ Rc1/ Female Connector Socket Body size Connecting KBB1-M5 KBB-M KBB-R1 KBB-R KBS Female Connector Elbow Union Body size Connecting KBL 1 Rc1/ Rc1/ Rc/ Rc1/ KBS1-R1 KBS-R KBS-R KBS-R 1 R1/ KBL1-R1S KBL-R1S KBL-RS KBL-RS KBL-RS KBL-RS KBL-RS KBL-RS KBL-RS Bulkhead Female Connector KBE Body size 1 1 Connecting M X 1 M1 X 1 M1 X 1 M0 X 1 M1 X 1 M0 X 1 M X 1 KBE1-0 KBE1-0 KBE-0 KBE-0 KBE- KBE-0 KBE- KBE- KBE- 1

69 Other Piping Material Piping Module Fittings Nipple KBN Cap KBC KQ /KQ Body size Body size KJ 1 KBN1 KBN KBN KBN 1 KBC1 KBC KBC KBC KS /KX KC Elbow Different Diameter Female Connector Module KBD Bracket KBX KM Size of branch body Body size Body size Size of branch body 1 Different Diameter Module Size of branch body Size of branch body 1 KBD-1 KBD- KBD- KBR KBR-1 KBR- KBR- part No. KBP, KBC KBE1-0 KBX KBX KBE1-0, KBE-0 KBX1 KBE-0, KBE-0 KBX1 KBE-, KBE- KBX0 KBE-, KBE- KBX In case of KBX, use the enclosed mounting screws designed for KBP (plug) and KBC (cap). Screw size: Cross recessed round head screw (M X 1 X l) Black KB KDM DM DMK KQG KG KP Plug KBP KPQ /KPG KA Body size 1 KBP1 KBP KBP KBP KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

70 Rectangular Multi-connector : Metric Size No. of connecting tubing:, 0 Substantial reduction of mounting space. Requires less installation space compared with use of numerous bulkhead unions for panel mounting. One-touch installation and removal of connector. Numbers of pipes can be connected and disconnected instantly without connection errors, saving substantial labor in installation. Plug connector Socket connector Plate Screw for bracket E type snap ring Panel mounting bracket (Standardised) Mounting only requires operation on the panel front. No need to make mounting screw holes. (Allows up to 5 of panel thickness) Clamp bolt One-touch tubing connection. One-touch fittings substantially cut down man hours for piping. Packing PAT.PEND Compatible with vacuum of 0 kpa to 1 MPa With one-touch fitting Tubing of different diameters can be used together. Socket case Plug case Metric size ø., ø, ø, ø Engagement in the prescribed For application requiring copper-free material (Electroless nickel plated) position can be achieved by fitting both surfaces. Two types, with and 0 connecting tubing are available. Refer to Best Pneumatics 00 Vol.15 for the inch size. Tubing Tubing material Tubing O.D. Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Nylon, Soft nylon, Polyurethane ø., ø, ø, ø Air 1.0 MPa 0 kpa 1.5 MPa 5 to 0 C (No freezing) KDM KDM0 No. of connecting tubing. KDM No. of connecting tubing 0. KDM Made to Order Electroless Nickel Plated on Brass Parts (Example) KDM--X X Made to Order Clean Series Electroless nickel plating on brass parts (X) Lubricant: Fluororesin grease Double packaging (Example) -KDM- Other tubing sizes tubing Number of - O.D. tubing Part no. IN-5-5 IN-5-5

71 Multi-connector : Metric Size No. of connecting tubing:, Fittings KQ /KQ One-touch installation and removal. Employs a unique positioning mechanism which provides one-touch installation and removal capability even in hard to see locations while preventing installation mistakes when re-connecting. Installation processes are considerably reduced. Simpler installation and less labor compared with use of numerous bulkhead unions for panel mounting. Secure tubing retention. Ensures tube retention by clamping or unclamping all tubing in one step. No. of connecting tubes Two types, with and connecting tubing, are available. No. of connecting tubing P S DM Specifications Configuration Multi connector Plug side Socket side Fluid Max. operating pressure Ambient and fluid temperature How to Order Tubing O.D N Accessories (Optional) C1 Single side cover (1 pc.) C Both sides cover ( pcs.) Tubing material N Nylon Soft nylon NU Polyurethane Air 1.0 MPa 5 to 0 C (No freezing) KJ KS /KX KC KM KB KDM DM DMK KQG KG KP Socket case Socket Floating mechanism to align case holes allows easy tubing insertion. Clamp bolt Possible to clamp with one bolt in one step operation. U seal Secure sealing. Plug Plate Spacer Plug case Secure retention by holding both tubing and barbs. Engagement in the prescribed position can be achieved by fitting both surfaces. Cover Stopper (With expander) Use of expander enables smooth tubing insertion by enlarging the tubing. Holder Clamp ring The socket and plug are engaged within one turn. KPQ /KPG KA KR KRM KK KKH KKA KF KFG PAT. H,DL, L,LL M MS LQ1 /LQ

72 Multi-connector DM With cover No. of connecting tubing tubing O.D. Multi-connector DM-0N -0NU -0N -0NU Plug side DMP-0N -0NU -0N -0NU Socket side DMS-0N -0NU -0N -0NU DM With cover No. of connecting tubing tubing O.D. Multi-connector DM-0N -0NU -0N -0NU Plug side DMP-0N -0NU -0N -0NU Socket side DMS-0N -0NU -0N -0NU Made to Order Made to Order Electroless Nickel Plating on Brass Parts (Example) DM-0N-X X 5

73 Multi-connector with One-touch Fittings : Metric Size No. of connecting tubing:, Fittings KQ /KQ With One-touch fitting to nylon, soft nylon and polyurethane tubing. Installation processes are considerably reduced. Simpler installation and less labor compared with use of numerous bulkhead unions for panel mounting. Secure tubing retention. Tubing can be firmly connected to the multiconnector in one-step operation (With one-touch fitting). No. of connecting tubes Two types, with and connecting tubing, are available. DMK No. of connecting tubing P S Specifications Configuration Multi connector Plug side Socket side tubing material Fluid Max. operating pressure Ambient and fluid temperature How to Order 0 Tubing O.D.. 0 Accessories (Optional) C1 C Nil Single side cover (1 pc.) Both sides cover ( pcs.) Nylon, Soft nylon, Polyurethane ø., Air 1.0 MPa 5 to 0 C (No freezing) KJ KS /KX KC KM KB KDM DM DMK KQG KG KP Socket Socket case Holder Plug Plug case The protrusion and recession on both surfaces can be fit for engagement at the prescribed position. KPQ /KPG KA KR KRM KK U-ring Secure sealing. Spacer Plate Cover Clamp ring Connects the socket and plug. KKH KKA KF KFG PAT. H,DL, L,LL M MS LQ1 /LQ

74 Multi-connector with One-touch Fittings DMK No. of connecting tubing tubing O.D. Multi-connector Plug side Socket Side With cover. DMK- DMKP- DMKS- DMK-0 DMKP-0 DMKS-0 DMK No. of connecting tubing tubing O.D. Multi-connector Plug side Socket Side. DMK- DMKP- DMKS- DMK-0 DMKP-0 DMKS-0 7

75 Stainless Steel 1 One-touch Fittings : Metric Size No. of connecting tubing: M5, R Corrosion Resistant Heat Resistant Material Metal parts: Stainless steel 1 Seal parts: Special FKM Can be used with steam Operating fluid temperature: 5 to 150 C Grease-free Tubing Tubing material Tubing O.D. Specifications Operating fluid Oparating pressure range Note 1) Proof pressure Ambient and Operating fluid temperature Note ) Lubricant Seal on the s FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefine Note ) ø, ø, ø, ø, ø Air, Water, Steam Note ) 0 kpa to 1 MPa.0 MPa 5 to 150 C (No freezing) Grease-free specification With sealant Note 1) Please avoid using in a vacuum holding application such as a leak tester, since there is leakage. Note ) When using at 0 C or higher, for an extended period of time, we recoend that an inner sleeve be used. Note ) In the event of using polyurethane tubing, we recoend the use of an inner sleeve in cases where the tubing is strained. Note ) Special FKM that is resistant even when steam is used. Fittings KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG Tube size Tubing model (Material) TU TUS (Polyurethane) (Soft polyurethane) TH (FEP) TL (PFA) inner sleeve Length TJ-00 1 TJ-05 1 TJ-00 1 TJ TJ TJ TJ-5 TJ-75 TJ-0 TJ-09 TJ- KG KP KPQ /KPG KA KR KRM KK All stainless steel 1 except seal parts KKH KKA KF KFG Seal parts Seal parts H,DL, L,LL (Special FKM) Male connector Male elbow (Special FKM) M MS LQ1 /LQ

76 Stainless Steel 1 One-touch Fittings Male Connector KQGH Male Elbow KQGL Connection M5 R1/ M5 R1/ R1/ KQGH0-M5 KQGH0-01S KQGH0-M5 KQGH0-01S KQGH0-0S KQGH0-01S KQGH0-0S KQGH0-0S KQGH-0S KQGH-0S KQGH-0S KQGH-0S Connection M5 R1/ M5 R1/ R1/ KQGL0-M5 KQGL0-01S KQGL0-M5 KQGL0-01S KQGL0-0S KQGL0-01S KQGL0-0S KQGL0-0S KQGL-0S KQGL-0S KQGL-0S KQGL-0S Hexagon Socket Head Male Connector KQGS Union Elbow KQGL Straight Union Connection M5 R1/ M5 R1/ R1/ KQGS0-M5 KQGS0-01S KQGS0-M5 KQGS0-01S KQGS0-0S KQGS0-01S KQGS0-0S KQGS0-0S KQGS-0S KQGS-0S KQGS-0S KQGS-0S KQGH KQGH0-00 KQGH0-00 KQGH0-00 KQGH-00 KQGH-00 Male Branch Tee Connection M5 R1/ M5 R1/ R1/ KQGL0-00 KQGL0-00 KQGL0-00 KQGL-00 KQGL-00 KQGT KQGT0-M5 KQGT0-01S KQGT0-M5 KQGT0-01S KQGT0-0S KQGT0-01S KQGT0-0S KQGT0-0S KQGT-0S KQGT-0S KQGT-0S KQGT-0S 9

77 Stainless Steel 1 One-touch Fittings Fittings Union Tee KQGT Bulkhead Union KQGE KQ /KQ KJ KQGT0-00 KQGT0-00 KQGT0-00 KQGT-00 KQGT-00 KQGE0-00 KQGE0-00 KQGE0-00 KQGE-00 KQGE-00 KS /KX KC KM Union Y KQGU KB KDM DM KQGU0-00 KQGU0-00 KQGU0-00 KQGU-00 KQGU-00 DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS 50 LQ1 /LQ

78 Stainless Steel Series One-touch Fittings : Metric Size Connecting : M5, R, Rc Corrosion Resistant Stainless steel specifications compatible with corrosive environment. Use of stainless steel 0 for metal parts. Suitable for use in CRT production lines for copper free environment, for food processing machine washing to endure water or salt water splashes and for use in clean rooms to prevent particle generation resulting from corrosion. tubing Tubing material Tubing O.D. Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Mounting Thread Nut Sealant (Thread portion) Nylon, Soft nylon, Polyurethane ø, ø, ø, ø, ø, ø1 Air, Water Note1) 1.0 MPa 0 kpa.0 MPa 5 to 0 C, In case of water: 0 to 0 C (No freezing) JIS B00 (Taper for piping) JIS B011, Class (Metric fine ) With / Without sealant Note) Note1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Note) Suffix "S" to part number if sealant is desired. Guide Collet Chuck to nylon and polyurethane. Large retaining force. Secure engagement with chuck and large retaining force with collet. Release button (White) Requires little force for removal. Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. Compatible with a wide range of pressure, from low vacuum to 1.0 MPa. The special shape ensures sealing and reduces resistance in tubing insertion. PAT. Packing Tubing Body (White) O-ring Stud Effective for piping in confined space. The body and portion can be rotated. 51

79 One-touch Fittings Stainless Series Fittings Male Connector Most coon style used to pipe from female in the same direction. <M5> <R> 1 M5 X 0. M5 X 0. Hexagon Socket Head Male Connector KGH0-M KGH0-M KGH KGH KGH KGH The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. <M5> <R> Connecting R1/ R1/ R1/ R1/ Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ R1/ KGH KGS KGS0-M5-01 KGS0-M KGS KGS KGS Male Elbow Most coon style used to pipe from female at a right angle. <M5> <R> Extended Male Elbow Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <M5> <R> 1 Connecting M5 X 0. R1/ M5 X 0. Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ R1/ R1/ R1/ KGL KGL0-M KGL0-M KGL KGL KGL KGL KGW KGW0-M KGW0-M KGW KGW KGW KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

80 One-touch Fittings Stainless Series Universal Male Elbow KGV The hexagon head of the body is used to tighten the body with a box wrench in a confined space. Male Run Tee KGY To branch the line from the female in the same direction and at 90. <M5> <R> Male Branch Tee M5 X 0. KGV0-M5-01 KGV0-M KGV KGV-0-0 KGV-0-0 To branch the line from the female at 90 in each direction. <M5> <R> Connecting M5 X 0. R1/ 1 R1/ R1/ Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ R1/ KGT KGT0-M KGT0-M KGT KGT KGT KGT <M5> <R> Union "Y" To branch tubing in the same direction. <M5> <R> 1 Connecting M5 X 0. R1/ M5 X 0. Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ R1/ R1/ R1/ KGY0-M KGY0-M KGY KGY KGY KGY KGU KGU0-M KGU0-M KGU KGU KGU

81 One-touch Fittings Stainless Series Fittings Male Branch Connector KGLU Delta Union KGD KQ /KQ To branch the line from the female at a right angle. To branch the line from the female into directions at right angles. KJ <M5> <R> Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ KGLU0-M KGLU0-M KGLU KGLU KGLU <M5> <R> Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ KGD0-M KGD0-M KGD KGD KGD KS /KX KC KM KB KDM DM DMK KQG Double Branch To branch the line from the female into tubes in the same direction. Connecting R1/ R1/ KGUD KGUD KGUD Straight Union To connect tubing in the same direction. tubing O.D. KGH KGH0-00 KGH0-00 KGH0-00 KGH-00 KGH-00 KG KP KPQ /KPG KA KR KRM Bulkhead Union To connect tubing through a panel. KGE KK KKH tubing O.D. 1 KGE0-00 KGE0-00 KGE0-00 KGE-00 KGE-00 KGE1-00 KKA KF KFG H,DL, L,LL M MS 5 LQ1 /LQ

82 One-touch Fittings Stainless Series Union Elbow KGL To connect tubing at right angles to each other. Union Tee 1 KGL0-00 KGL0-00 KGL0-00 KGL-00 KGL-00 KGL1-00 KGT To branch tubing into directions each at 90 to the original one. Union "Y" 1 To branch tubing in the same direction. KGT0-00 KGT0-00 KGT0-00 KGT-00 KGT-00 KGT1-00 KGU KGU0-00 KGU0-00 KGU0-00 KGU-00 KGU-00 Different Dia. Tee To branch the tubing into two at a right angle and reduce the resulting branches in size. - a a b Different Dia. Union "Y" Branch Union Elbow KGT KGT0-0 KGT0-0 KGT0- KGT- KGU To branch tubing into smaller tubes in the same direction as the original one. - a a b Different Dia. Double Union "Y" KGU0-0 KGU0-0 KGU0- KGU- To branch tubing into smaller tubes in the same direction as the original one. - a b b b a b KGUD KGUD0-0 KGUD0-0 KGLU To branch a tube at a right angle into two tubes. Different Dia. Straight To connect tubing of different diameters. a b a b KGH KGH0-0 KGH0-0 KGH0- KGH- KGLU0-00 KGLU0-00 KGLU0-00 KGLU-00 KGLU-00 55

83 One-touch Fittings Stainless Series Fittings Delta Union KGD To connect tubes at right angles with each other. Plug-in Elbow KGD0-00 KGD0-00 KGD0-00 KGD-00 KGD-00 KGL To change the tubing direction from a one-touch fitting by 90. Plug-in Reducer Fitting size To connect to a smaller one-touch fitting. Fitting size 1 1 KGL0-99 KGL0-99 KGL0-99 KGL-99 KGL-99 KGR KGR KGR KGR0- - KGR- -1 KGR-1 Female Connector To pipe from the male ed portion of a pressure gauge, etc. Tubing Cap To plug unused tubing. Connecting Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Bulkhead Female Connector KGF KGF KGF KGF KGF-0-0 KGF KGE Used for trunk connection between tubing and a male installed through a panel. Connecting Rc1/ KGE0-01 Rc1/ -0 Rc1/ KGE0-01 Rc1/ -0 Rc/ -0 Rc1/ KGE0-01 Rc1/ -0 Rc/ -0 Rc1/ KGE-0 Rc/ -0 Rc/ KGE-0 Rc1/ -0 1 Rc/ KGE1-0 Rc1/ -0 KGC KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF 1 KGC0-00 KGC0-00 KGC0-00 KGC-00 KGC-00 KGC1-00 KFG H,DL, L,LL M 5 MS LQ1 /LQ

84 Made to Order Made to Order Lubricant: Vaseline (Example) KGH0-0-X X Seal: Fluororesin Coating Oil Free: No Lubrication (Example) KGH0-0-X17 X17 Clean Series Lubricant: Fluororesin grease Double packaging - No Lubrication X57 With Sealant on R Thread S (Example) -KGH0-0 (Example) KGH0-0-X57 (Example) KGH0-0S 57

85 Clean One-touch Fittings (For Blow) Completely oil free. Liquid contact parts are non-metal. Components are washed, assembled and double packed in a clean room. Compatible with vacuum pressure ( 0 kpa) Caution Series KP is designed for clean blow and use in washing lines. Consult SMC for use in other applications. Sealant material: EPDM does not have sufficient resistance to mineral oil and is not suitable for piping of general pneumatic equipment. PAT. Body Polypropylene resin O-ring (Oil free) EPDM Drive bushing Polypropylene resin Stainless steel 0 The body can be rotated to position the piping entry (For positioning purpose). Collet Seal (Oil free) EPDM Special configuration for reliable sealing and low resistance when inserting tube. Stud Polypropylene resin Particle generation grade Fluid Max. operating pressure (0 C) Operating vacuum pressure Proof pressure (0 C) Ambient and fluid temperature Thread : Metric Size Connecting : R Recoended Tubing Polyolefin: Series TPH Tubing material Soft polyolefin: Series TPS Tubing O.D. ø, ø, ø, ø, ø Polyurethane tubing: Series TU, Nylon tubing: Series T, Soft nylon tubing: Series TS also can be used though with lower degree of cleanliness. Specifications Grade 1 Note 1) Air, Nitrogen gas, Water (Pure water) Note ) 1 MPa Note) 0 kpa MPa 0 to 0 C JIS B00 (Taper for piping) Note 1) Refer to the particle generation grade classifications. Note ) Contact SMC for other types of fluids. Note ) The max. operating pressure is one at 0 C. Note ) When water is used as the operating fluid, do not allow the surge pressure to exceed the max. operating pressure. Particle Generation Grade Classifications Average particle concentration particles/ft Grade Grade Grade Grade Particle Diameter µm or less Note) For more information, refer to SMC Clean Series Catalog. Guide Stainless steel 0 Release button Polyolefin resin Light force for removal Polypropylene Releases the chuck collet when tubing is removed. Also prevents the chuck from biting excessively into the tubing. Chuck Stainless steel 0 The chuck provides a secure bite, while holding force is increased by the collet. Cushion (Oil free) EPDM Stopper dust check Clean Clean tubing EPDM Holds the cushion and secures the seal. Suppresses sliding of the seal to prevent generation of particulates. 5 Fittings KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

86 Clean One-touch Fittings Male Connector KPH Most coon style used to pipe from female in the same direction. Male Run Tee KPY To branch the line from the female in the same direction and at 90. Connecting R1/ R1/ R1/ KPH KPH KPH KPH-0-0 KPH-0-0 Connecting R1/ R1/ R1/ KPY KPY KPY KPY-0-0 KPY-0-0 Male Elbow KPL Most coon style used to pipe from female at a right angle. Union "Y" To branch tubing in the same direction. KPU Connecting R1/ R1/ R1/ KPL KPL KPL KPL-0-0 KPL-0-0 Connecting R1/ R1/ R1/ KPU KPU KPU KPU-0-0 KPU-0-0 Male Branch Tee KPT To branch the line from the female at 90 in each direction. Straight Union To connect tubing in the same direction. KPH Connecting R1/ R1/ R1/ KPT KPT KPT KPT-0-0 KPT-0-0 KPH0-00 KPH0-00 KPH0-00 KPH-00 KPH-00 59

87 Clean One-touch Fittings Fittings Union Elbow KPL Plug-in Reducer KPR KQ /KQ To connect tubing at right angles to each other. To connect to a smaller one-touch fitting. KJ Union Tee KPL0-00 KPL0-00 KPL0-00 KPL-00 KPL-00 To branch tubing into directions each at 90 to the original one. KPT Plug Fitting size To plug unused one-touch fittings. KPR KPR0-0 - KPR0- - KPR- KPP KS /KX KC KM KB KDM DM DMK KPT0-00 KPT0-00 KPT0-00 KPT-00 KPT-00 Fitting size KPP-0 KPP-0 KPP-0 KPP- KPP- KQG KG KP Union "Y" To branch tubing in the same direction. KPU KPQ /KPG KPU0-00 KPU0-00 KPU0-00 KPU-00 KPU-00 KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS 0 LQ1 /LQ

88 Clean One-touch Fittings (For Driving System Air Piping) Size M5 is standardised. Use of P.P (Polypropylene) for resin parts. Series KPQ : Metric Size Connecting : R Recoended Tubing Tubing material Polyurethane: Series - Tubing O.D. ø, ø, ø, ø, ø Nylon tubing: Series T and series TS soft nylon tubing can also be used though with lower degree of cleanliness. Specifications Particle generation grade Grade 1 Note 1) Fluid Air Max. operating pressure (0 C) 1 MPa Note ) Operating vacuum pressure 0 kpa Proof pressure (0 C) MPa Ambient and fluid temperature 5 to 0 C (No freezing) Thread JIS B00 (Taper for piping) Note 1) Refer to the particle generation grading chart. Internal parts are not included in the grading because of greasing on sealant. Note ) The max. operating pressure is one at 0 C. Particle Generation Grading Clean Average particle concentration particles/ft Grade Grade Grade Grade 1 Series KPG Particle diameter µm or less Note) For more information, refer to SMC Clean Series Catalogue. Body Driving air piping system Release Button Polypropylene KPQ: Light grey KPG: Light blue Polypropylene Stud KPQ: Brass (Electroless nickel plated) KPG: Stainless (Stainless steel 0) In case of half union Body KPQ: Brass (Electroless nickel plated) KPG: Stainless (Stainless steel 0) Inside clean room Clean fittings KPQ/KPG PAT. Relief port piping Exhaust piping for solenoid valve Piping for regulator breathing Drain piping 1

89 Clean One-touch Fittings Fittings Male Connector KPQH/KPGH Most coon style used to pipe from female in the same direction. <M5> <R> Male Elbow Connecting KPQH KPGH M5 X 0. R1/ M5 X 0. R1/ KPQH0-M5 KPQH0-01 KPQH0-0 KPQH0-M5 KPQH0-01 KPQH0-0 KPGH0-M5 KPGH0-01 KPGH0-0 KPGH0-M5 KPGH0-01 KPGH0-0 R1/ KPQH0-01 KPQH-0 KPQH-0 KPGH0-01 KPGH-0 KPGH-0 KPQH0-0 KPQH-0 KPQH-0 KPGH0-0 KPGH-0 KPGH-0 KPQL/KPGL Most coon style used to pipe from female at a right angle. model tubing connection, O.D. Connecting screw KPQH KPQL KPGH KPGL M5 X 0. KPQL0-M5 KPGL0-M5 R1/ KPQL0-01 KPGL0-01 <M5> KPQL0-0 KPGL0-0 M5 X 0. KPQL0-M5 KPGL0-M5 R1/ KPQL0-01 KPGL0-01 KPQL0-0 KPGL0-0 R1/ KPQL0-01 KPGL0-01 KPQL0-0 KPGL0-0 KPQL-0 KPGL-0 KPQL-0 KPGL-0 <R> KPQL-0 KPGL-0 KPQL-0 KPGL-0 Union Tee To branch a tubing into directions each at 90 to the original one. <M5> <R> Male Run Tee Connecting M5 X 0. R1/ M5 X 0. R1/ R1/ KPQT/KPGT model KPQH KPQT KPGH KPGT KPQT0-M5 KPGT0-M5 KPQT0-01 KPGT0-01 KPQT0-0 KPGT0-0 KPQT0-M5 KPGT0-M5 KPQT0-01 KPGT0-01 KPQT0-0 KPGT0-0 KPQT0-01 KPGT0-01 KPQT0-0 KPGT0-0 KPQT-0 KPGT-0 KPQT-0 KPGT-0 KPQT-0 KPGT-0 KPQT-0 KPGT-0 KPQY/KPGY To branch the line from the female in the same direction and at 90. model tubing connection, O.D. Connecting screw KPQH KPQL KPGH KPGL M5 X 0. KPQY0-M5 KPGY0-M5 R1/ KPQY0-01 KPGY0-01 KPQY0-0 KPGY0-0 M5 X 0. KPQY0-M5 KPGY0-M5 R1/ KPQY0-01 KPGY0-01 <M5> KPQY0-0 KPGY0-0 R1/ KPQY0-01 KPGY0-01 KPQY0-0 KPGY0-0 KPQY-0 KPGY-0 KPQY-0 KPGY-0 <R> KPQY-0 KPGY-0 KPQY-0 KPGY-0 KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

90 Clean One-touch Fittings Union "Y" To branch tubing in the same direction. <M5> Straight Union To connect tubing in the same direction. Elbow <R> KPQU/KPGU model tubing connection, O.D. Connecting screw KPQH KPQU KPGH KPGU M5 X 0. R1/ M5 X 0. R1/ KPQU0-M5 KPQU0-01 KPQU0-0 KPQU0-M5 KPQU0-01 KPQU0-0 KPGU0-M5 KPGU0-01 KPGU0-0 KPGU0-M5 KPGU0-01 KPGU0-0 R1/ KPQU0-01 KPQU-0 KPQU-0 KPGU0-01 KPGU-0 KPGU-0 KPQU0-0 KPQU-0 KPQU-0 KPGU0-0 KPGU-0 KPGU-0 KPQH/KPGH KPQH KPGH KPQH0-00 KPGH0-00 KPQH0-00 KPGH0-00 KPQH0-00 KPGH0-00 KPQH-00 KPGH-00 KPQH-00 KPGH-00 KPQL/KPGL To connect tubing at right angles to each other. KPQL KPGL KPQL0-00 KPGL0-00 KPQL0-00 KPGL0-00 KPQL0-00 KPGL0-00 KPQL-00 KPGL-00 KPQL-00 KPGL-00 Union Tee To branch a tubing into directions each at 90 to the original one. Union "Y" To branch tubing in the same direction. Plug-in Reducer To connect to a smaller one-touch fitting. Plug Fitting size To plug unused one-touch fittings. KPQT/KPGT KPQT KPGT KPQT0-00 KPGT0-00 KPQT0-00 KPGT0-00 KPQT0-00 KPGT0-00 KPQT-00 KPGT-00 KPQT-00 KPGT-00 KPQU/KPGU KPQU KPGU KPQU0-00 KPGU0-00 KPQU0-00 KPGU0-00 KPQU0-00 KPGU0-00 KPQU-00 KPGU-00 KPQU-00 KPGU-00 KPQR/KPGR KPQR KPQR0-0 KPQR0-0 KPQR0-0 KPQR0- KPQR0- KPQR0- KPQR- KPP KPGR KPGR0-0 KPGR0-0 KPGR0-0 KPGR0- KPGR0- KPGR0- KPGR- Fitting size KPP-0 KPP-0 KPP-0 KPP- KPP-

91 Antistatic One-touch Fittings Anti-static fittings. One-touch attachment and removal. Compatible with vacuum pressure ( 0 kpa). Can be used for copper-free applications. Flame resistant (Equivalent to UL-9 Standards V-0) Surface resistance to 7 Ω Conductive resin is used for the body sealant of fittings. Tubing Tubing material Tubing O.D. Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Mounting : Metric Size Connecting : M, UNI Antistatic Measures Sealant (Thread portion) Copper-free specifications Surface resistance Spatter Proof Antistatic soft nylon, Antistatic polyurethane ø., ø, ø, ø, ø, ø Air 1.0 MPa 0 kpa.0 MPa 0 to 0 C UNI, screw JIS B009, Class (Metric coarse ) Gasket Brass parts are all electroless nickel plated. to 7 Ω Fittings KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG Packing Compatible with a wide range of pressure, from low vacuum to 1.0 MPa. The special shape ensures sealing and reduces resistance of tubing insertion. Body O-ring Stud Effective for piping in confined space. The body and portion can be rotated. (For positioning) Gasket Uni Chuck Large retaining force. Secure engagement with chuck and large retaining force with collet. Collet Guide Tubing Release button (Black) Requires little force for removal. Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

92 Antistatic One-touch Fittings Male Connector KAH Male Branch Tee KAT Most coon style used to pipe from female in the same direction. To branch the line from the female at 90 in each direction. Connecting Connecting M5 X 0. KAH-M5 M5 X 0. KAT-M5. M X 1 Uni 1/ -M -U01. M X 1 Uni 1/ -M -U01 M5 X 0. M X 1 Uni 1/ KAH0-M5 -M -U01 M5 X 0. M X 1 Uni 1/ KAT0-M5 -M -U01 Uni 1/ -U0 Uni 1/ -U0 <M5, M> <UNI > M5 X 0. M X 1 Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ KAH0-M5 -M -U01 -U0 -U0 KAH0-U01 -U0 -U0 KAH-U01 -U0 -U0 -U0 KAH-U0 -U0 -U0 <M5, M> <UNI > M5 X 0. M X 1 Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ KAT0-M5 -M -U01 -U0 -U0 KAT0-U01 -U0 -U0 KAT-U01 -U0 -U0 -U0 KAT-U0 -U0 -U0 Male Elbow KAL Male Run Tee KAY Most coon style used to pipe from female at a right angle. To branch the line from the female in the same direction and at 90. Connecting Connecting M5 X 0. KAL-M5 M5 X 0. KAY-M5. M X 1 Uni 1/ -M -U01. M X 1 Uni 1/ -M -U01 M5 X 0. M X 1 Uni 1/ KAL0-M5 -M -U01 M5 X 0. M X 1 Uni 1/ KAY0-M5 -M -U01 Uni 1/ -U0 Uni 1/ -U0 <M5,M> M5 X 0. M X 1 Uni 1/ Uni 1/ KAL0-M5 -M -U01 -U0 <M5, M> M5 X 0. M X 1 Uni 1/ Uni 1/ KAY0-M5 -M -U01 -U0 Uni / -U0 Uni / -U0 <UNI > Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ KAL0-U01 -U0 -U0 KAL-U01 -U0 -U0 -U0 KAL-U0 -U0 -U0 <UNI > Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ KAY0-U01 -U0 -U0 KAY-U01 -U0 -U0 -U0 KAY-U0 -U0 -U0 5

93 Antistatic One-touch Fittings Fittings Union "Y" KAU Branch Tee KAT KQ /KQ To branch tubing in the same direction. To branch a tubing into directions each at 90 to the original one. KJ <M5, M> <UNI > Connecting. M5 X 0. M X 1 Uni 1/ M5 X 0. M X 1 Uni 1/ Uni 1/ M5 X 0. M X 1 Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ KAU-M5 -M -U01 KAU0-M5 -M -U01 -U0 KAU0-M5 -M -U01 -U0 -U0 KAU0-U01 -U0 -U0 KAU-U0 -U0 -U0 KAU-U0 -U0 -U0 Union "Y". To branch tubing in the same direction.. KAT-00 KAT0-00 KAT0-00 KAT0-00 KAT-00 KAT-00 KAU KAU-00 KAU0-00 KAU0-00 KAU0-00 KAU-00 KAU-00 KS /KX KC KM KB KDM DM DMK KQG KG KP Straight Union To connect tubing in the same direction. KAH Different Dia. Straight To connect tubing of different diameters. KAH KPQ /KPG KA. KAH-00 KAH0-00 KAH0-00 KAH0-00 KAH-00 KAH-00 a b a b. KAH-0 KAH0-0 KAH0-0 KAH0- KAH- KR KRM KK KKH Union Elbow KAL To connect tubing at right angles to each other. KKA KF. KAL-00 KAL0-00 KAL0-00 KAL0-00 KAL-00 KAL-00 KFG H,DL, L,LL M MS LQ1 /LQ

94 Antistatic One-touch Fittings Plug-in Reducer KAR To connect to a smaller one-touch fitting.. Fitting size KAR-0 KAR KAR KAR0- - KAR- 7

95 Flame Resistant (Equivalent to UL-9 Standards V-0) FR One-touch Fittings KR (Black body) KR-W (White body) Tubing Tubing material Tubing O.D. Specifications : Metric Size Connecting : R, Rc Spatter Proof FR double layer, FR soft nylon ø, ø, ø, ø Fluid Air, Water Note1) Max. operating pressure 1.0 MPa Proof pressure.0 MPa Ambient and fluid temperature 5 to 0 C, In case of water: 0 to 0 C (No freezing) Mounting JIS B00 (Taper for piping) Thread Nut JIS B011, Class (Metric fine ) Sealant (Thread portion) With sealant (Standard) Note1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Fittings KQ /KQ KJ KS /KX KC KM KB KDM DM DMK Series KR: Black body. Series KR-W: White body. Guide Collet Chuck to soft nylon. Large retaining force. Secure engagement with chuck and large retaining force with collet. Packing Compatible with a wide range of pressure, from low vacuum to 1.0 MPa. The special shape ensures sealing and reduces resistance of tubing insertion. PAT. With sealant No need of a sealant tape. Body O-ring Stud Cover (Option) Prevents releasing of the tubing due to spatter invasion or adhesion. Please refer to P. for the cover. Release button Series KR: Black body. Series KR-W: White body. Requires little force for removal. Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. Tubing Effective for piping in confined space. The body and portion can be rotated. (For positioning) KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

96 Flame Resistant (Equivalent to UL-9 Standards V-0) FR One-touch Fittings Male Connector KRH/KRH-W Most coon style used to pipe from female in the same direction. 5 Male Elbow KRK/KRK-W For piping at 5 from female. Intermediate model between male connector and male elbow. Connecting R1/ R1/ R1/ KRH ( Release button, ) Release button Green KRH-W ( White ) KRH0-01S KRH0-01SW -0S -0SW -0S -0SW KRH0-01S KRH0-01SW -0S -0SW -0S -0SW KRH-01S KRH-01SW -0S -0SW -0S -0SW -0S -0SW KRH-0S KRH-0SW -0S -0SW -0S -0SW Connecting R1/ R1/ R1/ KRK (Black) KRK-W (White) KRK0-01S KRK0-01SW -0S -0SW -0S -0SW KRK0-01S KRK0-01SW -0S -0SW -0S -0SW KRK-01S KRK-01SW -0S -0SW -0S -0SW -0S -0SW KRK-0S KRK-0SW -0S -0SW -0S -0SW Male Elbow Most coon style used to pipe from female at a right angle. Connecting R1/ R1/ R1/ KRL/KRL-W KRL (Black) KRL-W (White) KRL0-01S KRL0-01SW -0S -0SW -0S -0SW KRL0-01S KRL0-01SW -0S -0SW -0S -0SW KRL-01S KRL-01SW -0S -0SW -0S -0SW -0S -0SW KRL-0S KRL-0SW -0S -0SW -0S -0SW Extended Male Elbow KRW/KRW-W Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. Connecting R1/ R1/ KRW (Black) KRW-W (White) KRW0-01S KRW0-01SW -0S -0SW -0S -0SW KRW0-01S KRW0-01SW -0S -0SW -0S -0SW KRW-0S KRW-0SW -0S -0SW -0S -0SW KRW-0S KRW-0SW -0S -0SW -0S -0SW Universal Male Elbow KRV/KRV-W The hexagon head of the body is used to tighten the body with a box wrench in a confined space. Connecting R1/ R1/ KRV (Black) KRV-W (White) KRV0-01S KRV0-01SW -0S -0SW KRV0-01S KRV0-01SW -0S -0SW -0S -0SW KRV-0S KRV-0SW -0S -0SW KRV-0S KRV-0SW -0S -0SW 9

97 Flame Resistant (Equivalent to UL-9 Standards V-0) FR One-touch Fittings Fittings Branch Tee To branch the line from the female at 90 in each direction. Male Run Tee Connecting KRT (Black) KRT-W (White) KRT0-01S KRT0-01SW -0S -0SW -0S -0SW KRT0-01S KRT0-01SW -0S -0SW -0S -0SW KRT-01S KRT-01SW -0S -0SW -0S -0SW -0S -0SW KRT-0S KRT-0SW -0S -0SW -0S -0SW To branch the line from the female in the same direction and at 90. R1/ R1/ R1/ Connecting R1/ R1/ R1/ KRT/KRT-W KRY/KRY-W KRY (Black) KRY-W (White) KRY0-01S KRY0-01SW -0S -0SW -0S -0SW KRY0-01S KRY0-01SW -0S -0SW -0S -0SW KRY-01S KRY-01SW -0S -0SW -0S -0SW -0S -0SW KRY-0S KRY-0SW -0S -0SW -0S -0SW Union "Y" To branch tubing in the same direction. Straight Union Connecting To connect tubing in the same direction. Bulkhead Union To connect tubing through a panel. Union Elbow KRU/KRU-W KRU (Black) KRU-W (White) KRU0-01S KRU0-01SW -0S -0SW -0S -0SW KRU0-01S KRU0-01SW -0S -0SW -0S -0SW KRU-0S KRU-0SW -0S -0SW -0S -0SW KRU-0S KRU-0SW -0S -0SW -0S -0SW KRH/KRH-W KRH (Black) KRH-W (White) KRH0-00 KRH0-00W KRH0-00 KRH0-00W KRH-00 KRH-00W KRH-00 KRH-00W KRE/KRE-W Release button, Release button Green White KRE0-00 KRE0-00W KRE0-00 KRE0-00W KRE-00 KRE-00W KRE-00 KRE-00W KRL/KRL-W To connect tubing at right angles to each other. R1/ R1/ KRH ( ) KRH-W ( ) KRL (Black) KRL-W (White) KRL0-00 KRL0-00W KRL0-00 KRL0-00W KRL-00 KRL-00W KRL-00 KRL-00W 70 KQ /KQ KJ KS /KX KC KM KB KR KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

98 Flame Resistant (Equivalent to UL-9 Standards V-0) FR One-touch Fittings Union Tee KRT/KRT-W To branch tubing into directions each at 90 to the original one. Plug To plug unused one-touch fittings. KRP KRT (Black) KRT-W (White) KRT0-00 KRT0-00W KRT0-00 KRT0-00W KRT-00 KRT-00W KRT-00 KRT-00W Fitting size KRP-0 KRP-0 KRP- KRP- KR Union "Y" To branch tubing in the same direction. KRU/KRU-W Spatter cover 1 KR Prevents releasing of the tubing due to spatter invasion or adhesion. KR ( tubing: FR soft nylon) KRU (Black) KRU-W (White) KRU0-00 KRU0-00W KRU0-00 KRU0-00W KRU-00 KRU-00W KRU-00 KRU-00W Fitting size KR-0C KR-0C KR-C KR-C Plug-in Reducer To connect to a smaller one-touch fitting. Fitting size KRR/KRR-W KRR (Black) KRR-W (White) KRR0-0 KRR0-0W - -W KRR0- KRR0-W - -W KRR- KRR-W Spatter cover Prevents releasing of the tubing due to spatter invasion or adhesion. KR ( tubing: FR soft nylon, FR layer) Fitting size KR KR-0C1 KR-0C1 KR-C1 KR-C1 Plug-in "Y" KRU/KRU-W To branch the line from a one-touch fitting into tubing in the same direction. Fitting size KRU (Black) KRU-W (White) KRU0-99 KRU0-99W KRU0-99 KRU0-99W KRU-99 KRU-99W KRU-99 KRU-99W 71

99 Flame Resistant (Equivalent to UL-9 Standards V-0) FR One-touch Fittings Fittings Bulkhead Female Union KRE-W KQ /KQ Used for trunk connection between tubing and a male installed through a panel. KJ Connecting Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ This model is not available with black body specifications. KRE-W (White) KRE0-01W -0W -0W KRE0-01W -0W -0W KRE-0W -0W KRE-0W -0W -0W KS /KX KC KM KB KDM DM Plug-in Elbow KRL-W To change the tubing direction from a one-touch fitting by 90. Extended Plug-in Elbow Fitting size KRL-W (White) This model is KRL0-99W not available with black body KRL0-99W specifications. KRL-99W KRL-99W KRW-W To change the tubing direction from a one-touch fitting by 90. to dimensional piping when used with a plug-in elbow. Fitting size KRW-W (White) This model is KRW0-99W not available with black body KRW0-99W specifications. KRW-99W KRW-99W DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH Made to Order Electroless Nickel Plated on Brass Parts (Example) KRH0-0S-X X Made to Order KKA KF KFG H,DL, L,LL M MS 7 LQ1 /LQ

100 Flame Resistant (Equivalent to UL-9 Standards V-0) Compact piping possible. Manifold piping possible. Rich variation of styles. One-touch installation. Cover (Option). FR One-touch Fittings Manifold KRM11 KRM Port A One-touch fitting One-touch fitting Tubing Tubing material Tubing O.D. : Metric Size Connecting : Rc Porting Port B One-touch fitting Rc female Number of port A,, Spatter Proof Port A Connection size ø tubing ø tubing ø tubing ø tubing Port B Connection size ø tubing ø tubing Rc1/ Rc/ FR double layer, FR soft nylon ø, ø, ø, ø KRM KRM11 Specifications Fluid Max. operating pressure Proof pressure Ambient and fluid temperature Thread Accessory KRM11 KRM Air, Water Note 1) 1.0 MPa.0 MPa 5 to 0 C, In case of water: 0 to 0 C (No freezing) JIS B00 (Taper for piping) None Hexagon socket head plug: 1 pc. Note 1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Construction KRM11 KRM Body Release button Body Seal Stud O-ring Port B Guide Gripper Collet Port A Port B Port B Seal Gripper Collet Guide Release button Port A Port B 7

101 Flame Resistant (Equivalent to UL-9 Standards V-0) FR One-touch Fittings Manifold Fittings KRM11 Spatter Cover KRMC KQ /KQ B A A B Number of port A KRM KRM KRMC ( tubing: FR soft nylon) N KRMC-0- - KRMC-0- - KJ KS /KX KC KRM Refer to KR- and page for spatter covers 1 and. KM KB A A Connection Rc1/ Rc/ Number of port A KRM KRM KDM DM DMK KQG KG Made to Order X Electroless Nickel Plated on Brass Parts (Example) KRM X Made to Order KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M 7 MS LQ1 /LQ

102 S Couplers Connection type: R, Rc, One-touch Fitting Nut Fittings Large effective sectional area. Light weight. Specifications Fluid Operating pressure range Proof pressure Ambient and fluid temperature Plating, Seal Air, Water (General industrial water) KK: 0 kpa to 1 MPa KK: 90 kpa to 1 MPa KK, : 0 to 1 MPa 1.5 MPa Air: 5 to 0 C Water: 5 to 0 C (No freezing) With electroless nickel plated (For copper free application), With male seal KK Performance Plug and socket connection Check valve Sleeve lock mechanism One-touch attachment and removal Socket: Built-in check valve (Standard) Manual locking type (Standard) JIS symbol Plug single KK// Socket single Series Series KK Series KK Series KK Series KK Plug no. KKP-M5M KKP-01MS KKP-0MS KKP-0MS Socket no. KKS-M5M KKS-01MS KKS-0MS KKS-0MS Effective area Note 1). 0 9 Weight g Note ) Plug and socket connection Note 1) Values when plug and socket are connected. Note ) Values for socket only. Lock ring: Shock absorbent PBT Sleeve cover standardized q w e qcheck valve end configuration facilitates rectifying effect Allows smooth flow of fluids. PAT. wno spring located in the flow path Loss of effective area is minimized because there is no valve spring to block the flow path. eemploys a unique connection method A slim body design and large effective area are achieved with a construction that does not use steel balls and therefore does not restrict the flow path. 75

103 S Couplers Fittings Plug (P) Socket (S) KQ /KQ Male Thread Type Body size Port size Male Thread Type Body size Port size KJ KS /KX KK M5 M5 x 0. R1 R1 KKP-M5M -01MS KKP-01MS KK M5 M5 x 0. R1 R1 KKS-M5M -01MS KKS-01MS KC KK// 1/ 1/ R1 R R1 R1 R -0MS -0MS KKP-01MS -0MS -0MS KK// 1/ 1/ R1 R R1 R1 R -0MS -0MS KKS-01MS -0MS -0MS KM KB 1/ R1 R R1-0MS KKP-0MS -0MS 1/ R1 R R1-0MS KKS-0MS -0MS KDM DM R -0MS R -0MS DMK Female Thread Type Female Thread Type KQG Body size M5 Port size M5 x 0. KKP-M5F KK Body size M5 Port size M5 x 0. KKS-M5F KG 1/ 1/ Rc1 Rc1 Rc Rc1 Rc KKP-01F -0F -0F KKP-0F -0F KK// 1/ 1/ Rc1 Rc1 Rc Rc1 Rc KKS-01F -0F -0F KKS-0F -0F KP KPQ /KPG 1/ Rc Rc1 KKP-0F -0F 1/ Rc Rc1 KKS-0F -0F KA Nut Fitting Type (for fiber reinforced urethane hose) hose Body size I.D. / O.D. 5/ 1/ /9.5/ 5/ /9 1/.5/ /.5/.5 / 1/.5/.5 11/1 KKP-50N -0N -5N KKP-50N -0N -5N -0N -5N KKP-0N -5N -1N Nut Fitting Type (for fiber reinforced urethane hose) hose Body size I.D. / O.D. 5/ 1/ /9.5/ 5/ /9 1/.5/ /.5/.5 / 1/.5/.5 11/1 KKS-50N -0N -5N KKS-50N -0N -5N -0N -5N KKS-0N -5N -1N KR KRM KK KKH KKA KF KFG H,DL, L,LL M 7 MS LQ1 /LQ

104 S Couplers Plug (P) Socket (S) Straight Type with One-touch Fitting Straight Type with One-touch Fitting Body size M5 1/ 1/ 1/. 1 KKP-H -0H -0H KKP-0H -0H -0H -H KKP-0H -0H -H -H KKP-H -1H KK KK// Body size M5 1/ 1/ 1/. 1 KKS-H -0H -0H KKS-0H -0H -0H -H KKS-0H -0H -H -H KKS-H -1H Elbow Type with One-touch Fitting Elbow Type with One-touch Fitting Body size M5 1/ 1/ 1/. 1 KKP-L -0L -0L KKP-0L -0L -0L -L KKP-0L -0L -L -L KKP-L -1L KK KK// Body size M5 1/ 1/ 1/. 1 KKS-L -0L -0L KKS-0L -0L -0L -L KKS-0L -0L -L -L KKS-L -1L Bulkhead Type with One-touch Fitting Bulkhead Type with One-touch Fitting Body size M5 1/ 1/ 1/. 1 KKP-E -0E -0E KKP-0E -0E -0E -E KKP-0E -0E -E -E KKP-E -1E KK KK// Body size M5 1/ 1/ 1/. 1 KKS-E -0E -0E KKS-0E -0E -0E -E KKS-0E -0E -E -E KKS-E -1E 77

105 Rubber cover and super-highimpact PBT resin which absorb drop impact (Equivalent to impact energy of 0.5 J) are adopted for body peripheral materials. Same flow rate as that of conventional series (Series KK). Specifications Fluid Operating pressure range Proof pressure Ambient and fluid temperature Plating, Seal Connection plug Performance Plug and socket connection Check valve Sleeve lock mechanism Air, Water (General industrial water) KKH: 90 kpa to 1 MPa KKH: 0 to 1 MPa 1.5 MPa Air: 5 to 0 C Water: 5 to 0 C (No freezing) Electroless nickel plated, With male seal Series KK plug One-touch attachment and removal Socket: Built-in check valve Effective Area The flow rate is same as that of current standard products because coon internal parts are used. PAT.

106 S Couplers Plug (P) Socket (S) Male Thread Type Male Thread Type Body size Port size Body size Port size 1/ R1/ KKP-01MS -0MS 1/ R1/ KKHS-01MS -0MS R1/ KKP-01MS R1/ KKHS-01MS 1/ -0MS -0MS 1/ -0MS -0MS -0MS -0MS Female Thread Type Female Thread Type Body size Port size Body size Port size 1/ R1/ KKP-01F 1/ R1/ KKHS-01F 1/ KKP-0F -0F 1/ KKHS-0F -0F Nut Fitting Type (for fiber reinforced urethane hose) Nut Fitting Type (for fiber reinforced urethane hose) Body size hose I.D. / O.D. Body size hose I.D. / O.D. 5/ KKP-50N 5/ KKHS-50N 1/ /9-0N 1/ /9-0N.5/ -5N.5/ -5N 5/ KKP-50N 5/ KKHS-50N /9-0N /9-0N 1/.5/ -5N 1/.5/ -5N / -0N / -0N.5/.5-5N.5/.5-5N Only sockets are provided as Series KKH. Please use plugs in Series KK. 79

107 S Couplers/Stainless steel Material Body material: Stainless steel 0 Seal material: Fluoro rubber (Special FKM) Connection port size 1 / to 1 1 / is available. Both plug and socket have an integral check valve. Available with and without check valves depending on the operating conditions. Reduces liquid dripping when the plug and socket are uncoupled. Liquid dripping cm at each removal Aeration cm at each removal Body size KKA KKA KKA KKA7 KKA KKA Liquid dripping: Volume of water leakage at the time when the plug and socket are uncoupled. Aeration: Volume of external air entrained when the plug and socket are connected. Specifications Fluid Operating pressure range Note) Proof pressure Ambient and fluid temperature Non-greased specification Material Seal Note) Do not use the S couplers with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Performance Effective Area Corrosion Resistant Plug and socket connection Check valve Plug valve Heat Resistant Water, Air KKA: 0 kpa to 1.0 MPa KKA//7//9: 0 to 1.0 MPa MPa 5 to 150 C (No freezing) Note) This product should not be used with steam. No grease is used. Rubber: Fluorine coated, Metal sliding parts: Plated with fluorine-contained material Metal part: Stainless steel 0, Rubber material: Fluoro rubber (Special FKM) With male seal Note) Series KKA cannot be connected with Series KK or Series KKH. Built-in check valve Plug: With check valve Socket: With check valve Plug: Without check valve Socket: With check valve Plug: Without check valve Socket: Without check valve Connection type: R, Rc One-touch connection and release Check valve on both sides, Without check valve Plug KKAP-01F KKAP-0F KKAP-0F KKA7P-0F KKAP-F KKA9P-F KKAP-01M-1 KKAP-0M-1 KKAP-0M-1 KKAP-01M-1 KKAP-0M-1 KKAP-0M-1 Socket KKAS-01F KKAS-0F KKAS-0F KKA7S-0F KKAS-F KKA9S-F KKAS-01M KKAS-0M KKAS-0M KKAS-01M-1 KKAS-0M-1 KKAS-0M-1 Effective area Socket valve Fittings KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH JIS Symbol With check valve Without check valve Check valve on both sides: Check valve on single side: Single plug Single socket Connected plug and socket KKA KF KFG H,DL, L,LL M No check valve on either side: 0 MS LQ1 /LQ

108 S Couplers/Stainless steel With check valve Plug (P) Socket (S) Male Thread Type Male Thread Type Body size Connection port size Body size Connection port size R1/ KKAP-01M R1/ KKAS-01M 1/ -0M 1/ -0M -0M -0M KKAP-0M KKAS-0M 1/ -0M 1/ -0M -0M -0M KKAP-0M KKAS-0M 1/ -0M 1/ -0M R/ -0M R/ -0M KKA7P-0M KKA7S-0M / R/ -0M / R/ -0M R1 -M R1 -M R/ KKAP-0M R/ KKAS-0M 1 R1 -M 1 R1 -M R1 1 / -M R1 1 / -M R1 KKA9P-M R1 KKA9S-M 1 1 / R1 1 / -M 1 1 / R1 1 / -M R1 1 / -1M R1 1 / -1M Female Thread Type Female Thread Type Body size Connection port size Rc1/ KKAP-01F Body size Connection port size Rc1/ KKAS-01F 1/ Rc1/ -0F 1/ Rc1/ -0F Rc/ -0F Rc/ -0F Rc1/ KKAP-0F Rc1/ KKAS-0F 1/ Rc/ -0F 1/ Rc/ -0F Rc1/ -0F Rc1/ -0F Rc/ KKAP-0F Rc/ KKAS-0F 1/ Rc1/ -0F 1/ Rc1/ -0F Rc/ -0F Rc/ -0F Rc1/ KKA7P-0F Rc1/ KKA7S-0F / Rc/ -0F / Rc/ -0F Rc1 -F Rc1 -F Rc/ KKAP-0F Rc/ KKAS-0F 1 Rc1 -F 1 Rc1 -F Rc1 1 / -F Rc1 1 / -F Rc1 KKA9P-F Rc1 KKA9S-F 1 1 / Rc1 1 / -F 1 1 / Rc1 1 / -F Rc1 1 / -1F Rc1 1 / -1F 1

109 S Couplers/Stainless steel Fittings Without check valve KQ /KQ Plug (P) Socket (S) KJ Male Thread Type Male Thread Type KS /KX Body size Connection port size R1/ KKAP-01M-1 Body size Connection port size R1/ KKAS-01M-1 KC 1/ -0M-1-0M-1 1/ -0M-1-0M-1 KM KKAP-0M-1 KKAS-0M-1 1/ -0M-1-0M-1 1/ -0M-1-0M-1 KB 1/ R/ KKAP-0M-1-0M-1-0M-1 1/ R/ KKAS-0M-1-0M-1-0M-1 KDM DM DMK Female Thread Type Female Thread Type KQG Body size Connection port size Rc1/ KKAP-01F-1 Body size Connection port size Rc1/ KKAS-01F-1 KG 1/ Rc1/ -0F-1 1/ Rc1/ -0F-1 Rc/ Rc1/ -0F-1 KKAP-0F-1 Rc/ Rc1/ -0F-1 KKAS-0F-1 KP 1/ 1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ -0F-1-0F-1 KKAP-0F-1-0F-1-0F-1 1/ 1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ -0F-1-0F-1 KKAS-0F-1-0F-1-0F-1 KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

110 Insert Fittings : Metric Size Connecting : R, Rc to nylon, soft nylon and polyurethane tubing. Designed for improvement of workability with low clamping torque. Tubing O.D. Tubing size I.D Nylon tubing Material Soft nylon tubing Polyurethane tubing Note) mark (polyurethane tubing ø, ø, ø) are provided with the captive styles because of different I.D. Specifications Note) Note) Note) Fluid Air Maximum operating pressure 1.0 MPa Operating vacuum pressure 1. kpa Proof pressure 7.0 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Mounting section JIS B00 (Taper for piping) Thread Nut section JIS B011, Class (Metric fine ) Sealant (Thread portion) Note) None or with sealant Note) The male elbow, male branch tee and male run tee with sealant are manufactured upon receipt of order. 9 Main Parts Material Body Nut Ferrule C0BD, C771BE C0BD Nylon Insert to nylon and polyurethane. Large retaining force. Tubing is securely held from inside and outside by the insert mechanism. Ferrule Small tightening torque. Adoption of the resin ferrule increases efficiency in tightening work. Compatible with of 1. kpa to 1.0 MPa Union nut Tubing Tubing grip Prevents the ferrule nut from sliding off along the tubing. The tubing grip lightly holds the tubing. Tubing holder Prevents tubing sliding during installation. The tubing holding mechanism gives the strong feeling when inserting the tubing and prevents the tubing from sliding when screwing in the tubing. Body PAT.

111 Insert Fittings Fittings Male Connector KFH Swivel Elbow KFV KQ /KQ Most coon style used to pipe from female in the same direction. Male Elbow tubing O.D. I.D Connecting KFH KFH KFH0U KFH0N KFHU KFHN KFHU KFHN Most coon style used to pipe from female at a right angle. tubing O.D. I.D. R1/ R1/ R1/ R1/ Connecting R1/ R1/ R1/ R1/ KFL KFL KFL KFL0U KFL0N KFLU KFLN KFLU KFLN To pipe from the female ed at the right angle. Swiveled at any direction. tubing O.D. I.D Connecting Swivel Extended Elbow KFV KFV KFV0U KFV0N KFVU KFVN KFVU KFVN To pipe from the female ed at a right angle. Swiveled at any direction. Solid piece moves fittings up from work piece. tubing O.D. I.D. R1/ R1/ R1/ R1/ Connecting R1/ R1/ R1/ R1/ KFW KFW KFW KFW0U KFW0N KFWU KFWN KFWU KFWN KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

112 Insert Fittings Male Branch Tee KFT To branch the line from the female at 90 in each direction. Straight Union To connect tubing in the same direction. KFH Male Run Tee tubing O.D. I.D Connecting KFT KFT KFT0U KFT0N KFTU KFTN KFTU KFTN To branch the line from the female in the same direction and at tubing O.D. I.D. R1/ R1/ R1/ R1/ Connecting R1/ R1/ R1/ R1/ KFY KFY KFY KFY0U KFY0N KFYU KFYN KFYU KFYN tubing O.D. Bulkhead Union O.D. Bulkhead Connector I.D To connect tubing through a panel. tubing I.D KFH0-00 KFH0-00 KFH0U-00 KFH0N-00 KFHU-00 KFHN-00 KFHU-00 KFHN-00 KFE KFE0-00 KFE0-00 KFE0U-00 KFE0N-00 KFEU-00 KFEN-00 KFEU-00 KFEN-00 KFE Used for trunk connection between tubing and a male installed on a panel. tubing Connecting O.D. I.D. Rc1/ Rc/ Rc/ Rc/ KFE0-0 KFE0U-0 KFE0N-0 KFEU-0 KFEN-0 KFEU-0 KFEN-0

113 Insert Fittings Fittings Union Tee KFT Plug KFP KQ /KQ To branch tubing into directions each at 90 to the original one. To plug unused insert fittings. KJ O.D. Female Connector tubing I.D KFT0-00 KFT0-00 KFT0U-00 KFT0N-00 KFTU-00 KFTN-00 KFTU-00 KFTN-00 KFF To pipe from the male ed portion of a pressure gauge, etc. tubing KFP-0 KFP-0 KFP-0 KFP- KFP- KS /KX KC KM KB KDM DM DMK tubing O.D. I.D Connecting Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc1/ KFF0-0 KFF KFF0U-0 KFF0N-0 KFFU-0 KFFN-0 KFFU-0 KFFN-0 KQG KG KP KPQ /KPG KA Made to Order Electroless Nickel Plated Metal Parts (Example) KFH0-0-X X Made to Order Clean Series Electroless nickel plated metal parts (X). Double packaging. (Example) -KFH0-0 - With Sealant on R Thread (Example) KFH0-0S S KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

114 Stainless Steel 1 Insert Fittings Material: Stainless Steel 1. Operating fluid temperature: 5 to 150 C. Can be used with steam. Grease-free. tubing material: FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin Tubing Series TH TL T TS TU TPH TPS Tubing O.D. Specifications : Metric Size Connecting : R, Rc Corrosion Resistant FEP PFA Nylon Soft nylon Polyurethane Polyolefin Soft polyolefin Operating fluid Air, Water, Steam Operating pressure range Note) 0 kpa to 1 MPa Proof pressure.0 MPa Ambient and Operating fluid temperature 5 to 150 C (No freezing) Lubricant Grease-free specification Seal on the s With sealant Note) Please avoid using in a vacuum holding application such as a leak tester, as leakage may occur. Component Parts Description Sleeve Union nut Guide Male connector body Male elbow body ø x ø.5 Material Stainless steel 1 Heat Resistant Tubing O.D. x I.D. () ø x ø ø x ø ø x ø7.5 ø x ø9 Note Silver plated inner surface Fluorine coating Tube can be connected without fully removing the nut. Prevents the tube from disconnecting during piping. Union nut Fastens lightly. Adhesion or binding also prevented. Body Sleeve The insert mechanism provides a reliable retaining force on the tube. Guide 7

115 Insert Fittings/Stainless steel Fittings Male Connector Most coon style used to pipe from female in the same direction. Male Elbow tubing O.D. I.D Connecting R1/ R1/ R1/ KFGH KFGH05-01S -0S KFGH00-01S -0S KFGH00-01S -0S -0S KFGH75-0S -0S -0S KFGH09-0S -0S -0S KFGL Most coon style used to pipe from female at a right angle. tubing O.D. I.D Connecting R1/ R1/ R1/ KFGL05-01S -0S KFGL00-01S -0S KFGL00-01S -0S -0S KFGL75-0S -0S -0S KFGL09-0S -0S -0S Male Branch Tee KFGT To branch the line from the female at 90 in each direction. tubing O.D. I.D. Straight Union Connecting R1/ R1/ R1/ To connect tubing in the same direction. Union Tee tubing O.D. I.D KFGT05-01S -0S KFGT00-01S -0S KFGT00-01S -0S -0S KFGT75-0S -0S -0S KFGT09-0S -0S -0S KFGH KFGH05-00 KFGH00-00 KFGH00-00 KFGH75-00 KFGH09-00 KFGT To branch tubing into directions each at 90 to the original one. tubing O.D. I.D KFGT05-00 KFGT00-00 KFGT00-00 KFGT75-00 KFGT09-00 KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA Union Nut KFGN SLEEVE KFGS KF tubing O.D. KFGN-0 KFGN-0 KFGN-0 KFGN- KFGN- tubing O.D. KFGS-0 KFGS-0 KFGS-0 KFGS- KFGS- KFG H,DL, L,LL M MS LQ1 /LQ

116 Self-align Fittings Ferrule with no orientation. The non-oriented construction is free from mistakes and consequent working loss or accidents when inserting the ferrule into the fitting body. Hardened ridge ferrule. The single bite construction with a strong ridge prevents breakage of ferrule when tightening. Small pressure loss. A large flow rate is achieved with small flow resistance due to the construction without an insert. Wide variety of styles and sizes. models including swivel styles and 5 tubing O.D. provide a wide range of fittings that will fit any application. Specifications tubing material Max. operating pressure Proof pressure Fluid Thread : Metric Size Connecting : R, Rc Thread portion Nut part Nylon tubing, Soft nylon tubing, Soft copper tubing (C0T-O) ø, ø, ø, ø, ø 1.0 MPa MPa Sealant (Thread portion) Note) None or with sealant Note) The male elbow, male branch tee and service tee union with sealant are manufactured upon receipt of order. Main Parts Material Body Nut Ferrule Spatter Proof Air JIS B 00 (Taper for piping) JIS B 011 Class (Metric fine ) C0BD, C771BE C0BD C700T Tubing Ferrule Large holding force by metal ferrule. to soft copper. (Not applicable to urethane tubing.) Union nut Flared inside diameter Prevents tubing from deforming inwards. Tubing holder Prevents tubing sliding during installation. The tubing holding mechanism gives the strong feeling when inserting the tubing and prevents the tubing from sliding when screwing in the tubing. Body PAT. 9

117 Self-align Fittings Fittings Male Connector H Swivel Elbow L KQ /KQ Most coon style used to pipe from female in the same direction. To pipe from the female ed at the right angle. Swiveled at any direction. KJ tubing Connecting R1/ R1/ R1/ H H H H H tubing Connecting R1/ R1/ R1/ L L L L L KS /KX KC KM KB KDM DM DMK KQG Male Elbow Most coon style used to pipe from female at a right angle. tubing Connecting R1/ R1/ R1/ DL DL DL DL DL DL Swivel Extended Elbow To pipe from the female ed at a right angle. Swiveled at any direction. Solid piece moves fittings up from work piece. tubing Connecting R1/ R1/ R1/ LL LL LL LL LL LL KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M 90 MS LQ1 /LQ

118 Self-align Fittings Male Branch Tee To branch the line from the female at 90 in each direction. Male Run Tee tubing DT DT DT DT DT DT DY To branch the line from the female in the same direction and at 90. tubing Bulkhead Union To connect tubing through a panel. Connecting R1/ R1/ R1/ Connecting R1/ R1/ R1/ tubing DY DY DY DY DY DE DE0-00 DE0-00 DE0-00 DE-00 DE-00 Union Tee To branch tubing into directions each at 90 to the original one. Female Connector tubing DT DT0-00 DT0-00 DT0-00 DT-00 DT-00 DHF To pipe from the male ed portion of a pressure gauge, etc. Bulkhead Female Connector tubing DHF0-0 DHF DHF0-0 DHF-0 DHF-0 DEF Used for trunk connection between tubing and a male installed through a panel. Plug tubing To plug unused self-align fittings. fitting size ø ø ø ø ø Connecting Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc1/ Connecting Rc1/ Rc/ Rc/ Rc/ DEF0-0 DEF0-0 DEF-0 DEF-0 DP DP-0 DP-0 DP-0 DP- DP- 91

119 Self-align Fittings Fittings Made to Order Electroless Nickel Plated Metal Parts (Example) H0-0-X X Made to Order With Sealant on R Thread (Example) H0-0S S KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M 9 MS LQ1 /LQ

120 Miniature Fittings : Metric Size Connecting : M, M5, R1/ Compact piping space. The hose nipple has a large holding force, allowing easy connection and removal. A wide variety of models is available. Piping in the same direction is possible at different heights. Hose nipple, Hose elbow. Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. ø tubing type is newly added. : ø : ø.1, ø, ø Specifications : ø tubing material Max. operating pressure (at 0 C) Connection size Thread : ø.1, ø, ø tubing material Max. operating pressure (at 0 C) Connection size Thread Barb Fittings: ø Barb Easy tube insertion High retaining force Body Electroless nickel plated Nylon Barb Fittings: ø.1, ø, ø Polyurethane 1 MPa M, M5, ø., ø JIS B009 Class (Metric coarse ) Soft nylon M, M5, R 1 Polyurethane 1.5 MPa 1.0 MPa 0. MPa JIS B009 Class (Metric coarse ), JIS B00 (Taper pipe ) Tubing Sleeve Attaching the sleeve achieves a large retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated. Gasket Low clamping torque Firm sealing Barb Easy tube insertion High retaining force Tubing Body Electroless nickel plated Gasket Low clamping torque Firm sealing Hose Nipple: ø.1, ø, ø Barb Easy tube insertion High retaining force Tubing Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. 9 PAT. Body Electroless nickel plated Gasket Low clamping torque Firm sealing Cap nut Secure holding is achieved by manual tightening. Easy disconnection of tubing by loosening. Electroless nickel plated.

121 Miniature Fittings Fittings : ø Port size: M, M5 : ø.1, ø, ø Port size: M KQ /KQ KJ Barb fitting tubing O.D. x I.D. () ø X ø1. Thread M x 0.5 M5 x 0. M-AU- M-5AU- Description Barb fittings for soft tubing Remark(s) ø.1/.1 X M ø.1/ X M M-AU- Application To pipe soft nylon tubing. To pipe polyurethane tubing. KS /KX KC Barb elbow Barb One-touch a b tubing O.D. x I.D. () ø X ø1. Thread M x 0.5 M5 x 0. tubing () a (O.D. x I.D.) b (O.D.) ø X ø1. ø. ø M-ALU- M-5ALHU- M-F- M-0F- Barb elbow for soft tubing Universal elbow ø/.5 X M ø.1/.1 X M ø.1/ X M ø/.5 X M M female X M male M-AU- M-ALU- M-ALU- M-UL To pipe soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. KM KB KDM DM DMK KQG KG KP KPQ /KPG Plug-in reducer tubing Fitting size O.D. x I.D. () ø X ø1. ød ø. ø M-R- M-0R- Universal tee M female X M female X M male M-UT Body rotates 0 around the stud axis. Position can be fixed after alignment. KA KR Nipple Plug M male X M male M-N M-P To connect fittings and equipment or to connect fittings. To plug unused M port. KRM KK KKH Gasket M-G Sealant (Thread portion) KKA KF KFG H,DL, L,LL M MS 9 LQ1 /LQ

122 : ø.1, ø, ø Port size: M5 Description Barb fittings for nylon tubing Remark(s) ø/.5 X M5 M-5AN- Application To pipe nylon tubing. Description Hose nipple Remark(s) ø/.5 X M5 M-5H- ø/ X M5 M-5H- Application To pipe nylon, soft nylon, polyurethane tubing. Barb fittings for soft tubing ø/ X M5 ø.1/.1 X M5 ø.1/ X M5 ø/.5 X M5 ø/ X M5 M-5AN- M-5AU- M-5AU- M-5AU- To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. Hose elbow Hose elbow (H) Elbow ø/.5 X M5 M-5HL- ø/ X M5 M-5HL- ø/.5 X M5 M-5HLH- ø/ X M5 M-5HLH- M5 female X M5 female M-5L To pipe nylon, soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. Perpendicular piping. Barb elbow for nylon tubing Barb elbow for soft tubing Barb elbow for nylon tubing (H) ø/.5 X M5 ø/ X M5 ø.1/.1 X M5 ø.1/ X M5 ø/.5 X M5 ø/ X M5 ø/.5 X M5 M-5ALN- M-5ALN- M-5ALU- M-5ALU- M-5ALU- M-5ALHN- ø/ X M5 M-5ALHN- To pipe nylon tubing Body rotates 0 around the stud axis. Position can be fixed after alignment. Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. To pipe nylon tubing Body rotates 0 around the stud axis. Position can be fixed after alignment. Tee Universal elbow Universal tee Extension fitting Nipple Universal nipple M5 female X M5 female X M5 female M5 female X M5 male M5 female X M5 female X M5 male M5 male X M5 female M5 male X M5 male M5 male X M5 male PAT. M-5T M-5UL M-5UT M-5J M-5N M-5UN Perpendicular piping in both directions. Body rotates 0 around the stud axis. Position can be fixed after alignment. Body rotates 0 around the stud axis. Position can be fixed after alignment. For D piping to prevent interference between fittings. To connect fittings and equipment or to connect fittings. Body rotates 0 around the stud axis. Barb elbow for soft tubing (H) ø.1/.1 X M5 To pipe soft nylon tubing. Bulkhead union M5 X M5 female female M-5E Panel mount connection ø.1/ X M5 ø/.5 X M5 ø/ X M5 M-5ALHU- M-5ALHU- M-5ALHU- Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. Bulkhead Reducer Manifold Rc1/ X M5 female Rc1/ X M5 female (9 port ) M-5ER M-5M Reduction from Rc1/ to M5. Panel mounting is possible. Rc1/ can be diverted in up to nine M5 stations. Panel mounting is possible. 95

123 Miniature Fittings Fittings : ø.1, ø, ø Port size: M5 Port size: R1/ KQ /KQ KJ Description Bushing Plug Gasket Remark(s) R1/ X M5 female X M5 female Material: Stainless steel /NBR M-5B M-5B1 M-5P M-5G Application Connection from R1/ piping to M5 fittings. Connection from piping to M5 fittings. To plug unused M5 port. M5 label Description Barb fittings for nylon tubing Barb fittings for soft tubing Remark(s) ø/.5 X R1/ ø/ X R1/ ø/.5 X R1/ ø/ X R1/ M-01AN- M-01AN- M-01AU- M-01AU- Application To pipe nylon tubing. To pipe soft nylon, polyurethane tubing. KS /KX KC KM KB KDM DM DMK Gasket (H) Material: Nylon GF0% M-5GH M-5AL- M-5ALH- M-5HL-, M-5HLH-,. Hose nipple ø/.5 X R1/ ø/ X R1/ M-01H- M-01H- To pipe nylon, soft nylon, polyurethane tubing. KQG KG KP KPQ /KPG Made to Order Clean Series Lubricant: Fluororesin grease (Fot only M-5UN) Double packaging (Example) -M-5AN- Made to Order - Electroless Nickel Plated Metal Parts X M-5E-X M-5ER-X M-5M-X Only the above three types are applicable. For other types, electroless nickel plating is standardized. KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS 9 LQ1 /LQ

124 Miniature Fittings/Stainless Steel 1 Can be used in corrosive applications. Material: Stainless steel 1. Compact piping space. The hose nipple has a large holding force, allowing easy connection and removal. A wide variety of models is available. Piping in the same direction is possible at different heights. Hose Nipple, Hose elbow. Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. Specifications tubing material tubing diameter Max. operating pressure (At 0 C) Connection size Body Material Gasket Hose Nipple : Metric Size: Connecting : M5 Nylon ø/ø.5 ø/ø Barb The tube allows easy tubing insertion as well as secure tubing holding. Corrosion Resistant ø.1/ø.1 Soft nylon Clean ø/ø.5 ø/ø 1.5 MPa 1.0 MPa 0. MPa M5 (JIS B009, Class : Metric coarse ) Stainless steel 1 PVC, Nylon GF0% Polyurethane ø.1/ø ø/ø.5, ø/ø Tubing Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. Body Stainless steel 1 Gasket Small tightening torque. Secure sealing. Cap nut Secure holding is achieved by manual tightening. Easy disconnection of tubing by loosening. Stainless steel 1 Barb Fittings Barb The tube allows easy tubing insertion as well as secure tubing holding. Tubing Body Stainless steel 1 Gasket Small tightening torque. Secure sealing. 97

125 Miniature Fittings/Stainless steel 1 Fittings : ø.1, ø, ø Port size: M5 KQ /KQ KJ Description Barb fittings for soft tubing Remark(s) ø.1/.1 X M5 ø.1/ X M5 MS-5AU- Application To pipe soft nylon tubing. To pipe polyurethane tubing. Description Remark(s) Application Universal elbow Body rotates 0 M5 female around the stud axis. MS-5UL X M5 male Position can be fixed after alignment. KS /KX KC Barb elbow for soft tubing Hose nipple Hose elbow ø/.5 X M5 ø/ X M5 ø.1/.1 X M5 ø.1/ X M5 ø/.5 X M5 ø/ X M5 ø/.5 X M5 ø/ X M5 ø/.5 X M5 ø/ X M5 MS-5AU- MS-5AU- MS-5ALHU- MS-5ALHU- MS-5ALHU- MS-5H- MS-5H- MS-5HLH- MS-5HLH- To pipe soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. To pipe nylon, soft nylon, polyurethane tubing. To pipe nylon, soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. Universal tee Bushing Plug Extension fitting Nipple Universal nipple Universal tee for soft tubing M5 female X M5 female X M5 male R1/ X M5 female M5 male X M5 female M5 male X M5 male M5 male X M5 male PAT ø.1/.1 X M5 ø.1/ X M5 ø/.5 X M5 ø/ X M5 MS-5UT MS-5B MS-5P MS-5J MS-5N MS-5UN MS-5ATHU- MS-5ATHU- MS-5ATHU- Body rotates 0 around the stud axis. Position can be fixed after alignment. Connection from R1/ piping to M5 fittings. To plug unused M5 port. For D piping to prevent interference between fittings. To connect fittings and equipment or to connect fittings. Body rotates 0 around the stud axis. Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH Gasket Material: PVC M-5G1 Sealant (M5 portion) Gasket (H) Material: Nylon GF0% M-5GH Only for MS-5ALHU-, MS-5HLH-, MS-5HLH- and MS-5ATHU-. KKA KF Made to Order Clean Series - Made to Order KFG H,DL, L,LL Lubricant: Fluororesin grease (Fot only MS-5UN) Double packaging M (Example)-MS-5AN- MS 9 LQ1 /LQ

126 High Purity Fluoropolymer Fittings : Metric/Inch Size Connecting : R, Rc, NPT Quadruple sealing construction The quadruple sealing construction (PAT.) based on SMC s original idea results in highly reliable sealing characteristics with outstanding leakage prevention effect. Locking Locking mechanism utilizes sealing lock by the nut. Trapezoidal allows application of high torque. stage pressing by the tubing holder of the nut ensures secure tube holding. Flow-through characteristics Excellent flow-through characteristics are achieved by minimizing liquid deposit. Strong resistance to tube bending and deformation. Able to withstand lateral loads with the tubing support. Tubing sizes are interchangeable. The reducer method allows tubing size changes without replacing the body. Helps standardise fitting items resulting in less stock requirements. Easy tightening of nuts. up the tubing to the end of the fitting body. No positioning guide is required, simply tighten The trapezoidal prevents oblique nut insertion. Heat Resistant Specifications Withstand Pressure and Heat Resistance Performance Pressure (MPa) Feature Material Maximum operating pressure (at 0C ) Proof pressure Operating temperature Temperature ( C) 1/", /1", 1/", ø, ø tubing /", ø tubing 1/", ø tubing /", ø19, 1", ø5 tubing Corrosion Resistant LQ1 LQ1 0.7 MPa Pressure (MPa) NEW PFA LQ Refer to the withstand pressure and heat resistance performance curves. 0 to 150 C Clean 1.0 MPa 0 to 00 C LQ Temperature ( C) 1/", /1", 1/", ø, ø tubing /", ø tubing 1/", ø tubing /", ø19, 1", ø5 tubing Basic stage pressing construction ensures sealing and tubing locking to absorb differences in the tube outside diameter. D side sealing A seal is formed when the tubing is inserted, with its insert bushing, and its compression against the internal nut. Main sealing Sealing lock Main sealing Tapered face Fluid pressure B side sealing By tapering the face of the body, perfect sealing is achieved by the pressure of the bushing against the body wall (the portrusion of the insert bushing ensures that a secure high pressure seal is achieved). A side sealing The fluid pressure pushes the seal face to get effective sealing. Area of application Area of application 99 Tubing support Trapezoidal C side sealing Sealed by the pressure exerted on the tubing by the internal nut.

127 High Purity Fluoropolymer Fittings Fittings LQ1H Male Connector LQH Female Male Female LQ1F Union flange KQ /KQ KJ KS /KX LQ1L Female Elbow LQL Female KC KM Male Male KB LQ1R Female Run tee LQR Female KDM DM DMK Male Male KQG LQ1B Female Branch tee LQB Female KG KP Male LQ1E Male Union elbow LQE KPQ /KPG KA KR LQ1T Union tee LQT KRM KK KKH LQ1P Panel mount union LQP KKA KF KFG LQ1U Union LQU H,DL, L,LL M 0 MS LQ1 /LQ

128 High Purity Fluoropolymer Fittings Male Connector ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 Connection s R/NPT LQ1/LQH-M Female Connector LQ1/LQH-F Metric sizes LQ1 LQ LQ1H11-M LQ1H-M LQ1H1-M LQ1H-M LQ1H-M LQ1H-M LQ1H1-M LQ1H-M LQ1H-M LQ1H-M LQ1H5-M LQ1H-M LQ1H1-M LQ1H-M LQ1H-M LQ1H-M LQ1H51-M LQ1H5-M LQ1H5-M LQ1H5-M LQ1H1-M LQ1H-M LQ1H-M LQ1H-M LQH1-M LQH-M LQH-M LQH-M LQH1-M LQH-M LQH-M LQH-M LQH5-M LQH-M LQH1-M LQH-M LQH-M LQH-M LQH51-M LQH5-M LQH5-M LQH5-M 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" Fill in with appropriate type. Inch sizes LQ1 LQ LQ1H1A-M LQ1HA-M LQ1HB-M LQ1HC-M LQ1HD-M LQ1HE-M LQ1HF-M LQ1HA-M LQ1HB-M LQ1HC-M LQ1HD-M LQ1HA-M LQ1HB-M LQ1HC-M LQ1HD-M LQ1H5A-M LQ1H5B-M LQ1H5C-M LQ1H5D-M LQ1HA-M LQ1HB-M LQ1HC-M LQ1HD-M LQHA-M LQHB-M LQHC-M LQHD-M LQHE-M LQHF-M LQHA-M LQHB-M LQHC-M LQHD-M LQHA-M LQHB-M LQHC-M LQHD-M LQH5A-M LQH5B-M LQH5C-M LQH5D-M 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 Metric sizes LQ1 LQ LQ1H11-F LQ1H-F LQ1H1-F LQ1H-F LQ1H-F LQ1H-F LQ1H1-F LQ1H-F LQ1H-F LQ1H-F LQ1H5-F LQ1H-F LQ1H1-F LQ1H-F LQ1H-F LQ1H-F LQ1H51-F LQ1H5-F LQ1H5-F LQ1H5-F LQ1H1-F LQ1H-F LQ1H-F LQ1H-F LQH1-F LQH-F LQH-F LQH-F LQH1-F LQH-F LQH-F LQH-F LQH5-F LQH-F LQH1-F LQH-F LQH-F LQH-F LQH51-F LQH5-F LQH5-F LQH5-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" Inch sizes LQ1 LQ LQ1H1A-F LQ1HA-F LQ1HB-F LQ1HC-F LQ1HD-F LQ1HE-F LQ1HF-F LQ1HA-F LQ1HB-F LQ1HC-F LQ1HD-F LQ1HA-F LQ1HB-F LQ1HC-F LQ1HD-F LQ1H5A-F LQ1H5B-F LQ1H5C-F LQ1H5D-F LQ1HA-F LQ1HB-F LQ1HC-F LQ1HD-F LQHA-F LQHB-F LQHC-F LQHD-F LQHE-F LQHF-F LQHA-F LQHB-F LQHC-F LQHD-F LQHA-F LQHB-F LQHC-F LQHD-F LQH5A-F LQH5B-F LQH5C-F LQH5D-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" LQ1 LQ1 LQ LQ Nil N R,Rc NPT Fill in with appropriate type. Nil N R,Rc NPT tubing O.D. Connection s R/NPT tubing O.D. Connection s R/NPT tubing O.D. Connection s R/NPT tubing O.D. 1

129 KQ /KQ KJ KC KM KB KDM DM DMK KQG KG KP KA KR KRM KK KKH KKA MS M KS /KX KPQ /KPG H,DL, L,LL LQ1 /LQ ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 LQ1/LQL-M LQ1/LQL-F LQ1 LQ 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" LQ1 LQ LQ1L1A-M LQ1LA-M LQ1LB-M LQ1LC-M LQ1LD-M LQ1LE-M LQ1LF-M LQ1LA-M LQ1LB-M LQ1LC-M LQ1LD-M LQ1LA-M LQ1LB-M LQ1LC-M LQ1LD-M LQ1L5A-M LQ1L5B-M LQ1L5C-M LQ1L5D-M LQ1LA-M LQ1LB-M LQ1LC-M LQ1LD-M LQLA-M LQLB-M LQLC-M LQLD-M LQLE-M LQLF-M LQLA-M LQLB-M LQLC-M LQLD-M LQLA-M LQLB-M LQLC-M LQLD-M LQL5A-M LQL5B-M LQL5C-M LQL5D-M LQ1L11-M LQ1L-M LQ1L1-M LQ1L-M LQ1L-M LQ1L-M LQ1L1-M LQ1L-M LQ1L-M LQ1L-M LQ1L5-M LQ1L-M LQ1L1-M LQ1L-M LQ1L-M LQ1L-M LQ1L51-M LQ1L5-M LQ1L5-M LQ1L5-M LQ1L1-M LQ1L-M LQ1L-M LQ1L-M LQL1-M LQL-M LQL-M LQL-M LQL1-M LQL-M LQL-M LQL-M LQL5-M LQL-M LQL1-M LQL-M LQL-M LQL-M LQL51-M LQL5-M LQL5-M LQL5-M 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 LQ1 LQ LQ1L11-F LQ1L-F LQ1L1-F LQ1L-F LQ1L-F LQ1L-F LQ1L1-F LQ1L-F LQ1L-F LQ1L-F LQ1L5-F LQ1L-F LQ1L1-F LQ1L-F LQ1L-F LQ1L-F LQ1L51-F LQ1L5-F LQ1L5-F LQ1L5-F LQ1L1-F LQ1L-F LQ1L-F LQ1L-F LQL1-F LQL-F LQL-F LQL-F LQL1-F LQL-F LQL-F LQL-F LQL5-F LQL-F LQL1-F LQL-F LQL-F LQL-F LQL51-F LQL5-F LQL5-F LQL5-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" LQ1 LQ LQ1L1A-F LQ1LA-F LQ1LB-F LQ1LC-F LQ1LD-F LQ1LE-F LQ1LF-F LQ1LA-F LQ1LB-F LQ1LC-F LQ1LD-F LQ1LA-F LQ1LB-F LQ1LC-F LQ1LD-F LQ1L5A-F LQ1L5B-F LQ1L5C-F LQ1L5D-F LQ1LA-F LQ1LB-F LQ1LC-F LQ1LD-F LQLA-F LQLB-F LQLC-F LQLD-F LQLE-F LQLF-F LQLA-F LQLB-F LQLC-F LQLD-F LQLA-F LQLB-F LQLC-F LQLD-F LQL5A-F LQL5B-F LQL5C-F LQL5D-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" LQ1 LQ1 LQ LQ Fill in with appropriate type. Fill in with appropriate type. High Purity Fluoropolymer Fittings Male Elbow Connection s R/NPT Female Elbow Metric sizes Metric sizes tubing O.D. Connection s R/NPT tubing O.D. Fittings Inch sizes Inch sizes Connection s R/NPT tubing O.D. Connection s R/NPT tubing O.D. Nil N R,Rc NPT Nil N R,Rc NPT KF KFG

130 ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 LQ1/LQR-M LQ1/LQR-F LQ1 LQ LQ1R11-M LQ1R-M LQ1R1-M LQ1R-M LQ1R-M LQ1R-M LQ1R1-M LQ1R-M LQ1R-M LQ1R-M LQ1R5-M LQ1R-M LQ1R1-M LQ1R-M LQ1R-M LQ1R-M LQ1R51-M LQ1R5-M LQ1R5-M LQ1R5-M LQ1R1-M LQ1R-M LQ1R-M LQ1R-M LQR1-M LQR-M LQR-M LQR-M LQR1-M LQR-M LQR-M LQR-M LQR5-M LQR-M LQR1-M LQR-M LQR-M LQR-M LQR51-M LQR5-M LQR5-M LQR5-M 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" Inch sizes Connection s R/NPT tubing O.D. LQ1 LQ LQ1R1A-M LQ1RA-M LQ1RB-M LQ1RC-M LQ1RD-M LQ1RE-M LQ1RF-M LQ1RA-M LQ1RB-M LQ1RC-M LQ1RD-M LQ1RA-M LQ1RB-M LQ1RC-M LQ1RD-M LQ1R5A-M LQ1R5B-M LQ1R5C-M LQ1R5D-M LQ1RA-M LQ1RB-M LQ1RC-M LQ1RD-M LQRA-M LQRB-M LQRC-M LQRD-M LQRE-M LQRF-M LQRA-M LQRB-M LQRC-M LQRD-M LQRA-M LQRB-M LQRC-M LQRD-M LQR5A-M LQR5B-M LQR5C-M LQR5D-M 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 LQ1 LQ LQ1R11-F LQ1R-F LQ1R1-F LQ1R-F LQ1R-F LQ1R-F LQ1R1-F LQ1R-F LQ1R-F LQ1R-F LQ1R5-F LQ1R-F LQ1R1-F LQ1R-F LQ1R-F LQ1R-F LQ1R51-F LQ1R5-F LQ1R5-F LQ1R5-F LQ1R1-F LQ1R-F LQ1R-F LQ1R-F LQR1-F LQR-F LQR-F LQR-F LQR1-F LQR-F LQR-F LQR-F LQR5-F LQR-F LQR1-F LQR-F LQR-F LQR-F LQR51-F LQR5-F LQR5-F LQR5-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" LQ1 LQ LQ1R1A-F LQ1RA-F LQ1RB-F LQ1RC-F LQ1RD-F LQ1RE-F LQ1RF-F LQ1RA-F LQ1RB-F LQ1RC-F LQ1RD-F LQ1RA-F LQ1RB-F LQ1RC-F LQ1RD-F LQ1R5A-F LQ1R5B-F LQ1R5C-F LQ1R5D-F LQ1RA-F LQ1RB-F LQ1RC-F LQ1RD-F LQRA-F LQRB-F LQRC-F LQRD-F LQRE-F LQRF-F LQRA-F LQRB-F LQRC-F LQRD-F LQRA-F LQRB-F LQRC-F LQRD-F LQR5A-F LQR5B-F LQR5C-F LQR5D-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" LQ1 LQ1 LQ LQ Fill in with appropriate type. Fill in with appropriate type. High Purity Fluoropolymer Fittings Male Run Tee Connection s R/NPT Female Run Tee Metric sizes Metric sizes tubing O.D. Connection s R/NPT tubing O.D. Nil N R,Rc NPT Nil N R,Rc NPT Inch sizes Connection s R/NPT tubing O.D.

131 KQ /KQ KJ KC KM KB KDM DM DMK KQG KG KP KA KR KRM KK KKH KKA MS M KS /KX KPQ /KPG H,DL, L,LL LQ1 /LQ ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 LQ1/LQB-M LQ1B-F LQ1 LQ 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" LQ1 LQ LQ1B1A-M LQ1BA-M LQ1BB-M LQ1BC-M LQ1BD-M LQ1BE-M LQ1BF-M LQ1BA-M LQ1BB-M LQ1BC-M LQ1BD-M LQ1BA-M LQ1BB-M LQ1BC-M LQ1BD-M LQ1B5A-M LQ1B5B-M LQ1B5C-M LQ1B5D-M LQ1BA-M LQ1BB-M LQ1BC-M LQ1BD-M LQBA-M LQBB-M LQBC-M LQBD-M LQBE-M LQBF-M LQBA-M LQBB-M LQBC-M LQBD-M LQBA-M LQBB-M LQBC-M LQBD-M LQB5A-M LQB5B-M LQB5C-M LQB5D-M LQ1B11-M LQ1B-M LQ1B1-M LQ1B-M LQ1B-M LQ1B-M LQ1B1-M LQ1B-M LQ1B-M LQ1B-M LQ1B5-M LQ1B-M LQ1B1-M LQ1B-M LQ1B-M LQ1B-M LQ1B51-M LQ1B5-M LQ1B5-M LQ1B5-M LQ1B1-M LQ1B-M LQ1B-M LQ1B-M LQB1-M LQB-M LQB-M LQB-M LQB1-M LQB-M LQB-M LQB-M LQB5-M LQB-M LQB1-M LQB-M LQB-M LQB-M LQB51-M LQB5-M LQB5-M LQB5-M 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø19 ø ø19 ø ø5 ø19 ø5 ø19 LQ1 LQ LQ1B11-F LQ1B-F LQ1B1-F LQ1B-F LQ1B-F LQ1B-F LQ1B1-F LQ1B-F LQ1B-F LQ1B-F LQ1B5-F LQ1B-F LQ1B1-F LQ1B-F LQ1B-F LQ1B-F LQ1B51-F LQ1B5-F LQ1B5-F LQ1B5-F LQ1B1-F LQ1B-F LQ1B-F LQ1B-F LQB1-F LQB-F LQB-F LQB-F LQB1-F LQB-F LQB-F LQB-F LQB5-F LQB-F LQB1-F LQB-F LQB-F LQB-F LQB51-F LQB5-F LQB5-F LQB5-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" 1/" 1/" /1" 1/" 1/" /1" 1/" /" 1/" /" 1/" 1/" /" 1/" /" /" 1/" /" 1/" 1" /" 1" /" LQ1 LQ LQ1B1A-F LQ1BA-F LQ1BB-F LQ1BC-F LQ1BD-F LQ1BE-F LQ1BF-F LQ1BA-F LQ1BB-F LQ1BC-F LQ1BD-F LQ1BA-F LQ1BB-F LQ1BC-F LQ1BD-F LQ1B5A-F LQ1B5B-F LQ1B5C-F LQ1B5D-F LQ1BA-F LQ1BB-F LQ1BC-F LQ1BD-F LQBA-F LQBB-F LQBC-F LQBD-F LQBE-F LQBF-F LQBA-F LQBB-F LQBC-F LQBD-F LQBA-F LQBB-F LQBC-F LQBD-F LQB5A-F LQB5B-F LQB5C-F LQB5D-F 1/" 1/" 1/" 1/" /" /" 1/" 1/" /" /" 1" LQ1 LQ1 LQ LQ Fill in with appropriate type. Fill in with appropriate type. High Purity Fluoropolymer Fittings Male Branch Tee Connection s R/NPT Female Branch Tee Metric sizes Metric sizes tubing O.D. Connection s R/NPT tubing O.D. Inch sizes Connection s R/NPT tubing O.D. Inch sizes Connection s R/NPT tubing O.D. Nil N R,Rc NPT Nil N R,Rc NPT Fittings KF KFG

132 High Purity Fluoropolymer Fittings Union Elbow LQ1/LQE Union Tee LQ1/LQT Metric sizes Metric sizes LQ1 LQ LQ1 LQ LQ1 LQ ø ø ø ø ø ø ø ø ø ø19 ø ø5 ø19 LQ1E11 LQ1E LQ1E1 LQ1E LQ1E1 LQ1E LQ1E LQ1E1 LQ1E LQ1E51 LQ1E5 LQ1E1 LQ1E Inch sizes LQE1 LQE LQE1 LQE LQE LQE1 LQE LQE51 LQE5 LQ1 LQ ø ø ø ø ø ø ø ø ø ø19 ø ø5 ø19 LQ1T11 LQ1T LQ1T1 LQ1T LQ1T1 LQ1T LQ1T LQ1T1 LQ1T LQ1T51 LQ1T5 LQ1T1 LQ1T Inch sizes LQT1 LQT LQT1 LQT LQT LQT1 LQT LQT51 LQT5 LQ1 LQ 1/" 1/" /1" 1/" /" 1/" 1/" /" /" 1/" 1" /" LQ1E1A LQ1EA LQ1EB LQ1EC LQ1EA LQ1EB LQ1EA LQ1EB LQ1E5A LQ1E5B LQ1EA LQ1EB LQEA LQEB LQEC LQEA LQEB LQEA LQEB LQE5A LQE5B Fill in with appropriate combination code when different diameter is used. Refer to page 7 for details. LQ1 LQ 1/" 1/" /1" 1/" /" 1/" 1/" /" /" 1/" 1" /" LQ1T1A LQ1TA LQ1TB LQ1TC LQ1TA LQ1TB LQ1TA LQ1TB LQ1T5A LQ1T5B LQ1TA LQ1TB LQTA LQTB LQTC LQTA LQTB LQTA LQTB LQT5A LQT5B Fill in with appropriate combination code when different diameter is used. Refer to page 7 for details. 5

133 High Purity Fluoropolymer Fittings Fittings Panel Mount Union LQ1/LQP Union LQ1/LQU KQ /KQ KJ Metric sizes LQ1 LQ Metric sizes LQ1 LQ KS /KX LQ1 LQ ø ø ø ø ø ø ø ø ø ø19 ø ø5 ø19 LQ1P11 LQ1P LQ1P1 LQ1P LQ1P1 LQ1P LQ1P LQ1P1 LQ1P LQ1P51 LQ1P5 LQ1P1 LQ1P LQP1 LQP LQP1 LQP LQP LQP1 LQP LQP51 LQP5 LQ1 LQ ø ø ø ø ø ø ø ø ø ø19 ø ø5 ø19 LQ1U11 LQ1U LQ1U1 LQ1U LQ1U1 LQ1U LQ1U LQ1U1 LQ1U LQ1U51 LQ1U5 LQ1U1 LQ1U LQU1 LQU LQU1 LQU LQU LQU1 LQU LQU51 LQU5 KC KM KB KDM DM DMK Inch sizes LQ1 LQ Inch sizes LQ1 LQ KQG 1/" 1/" LQ1P1A LQ1PA LQPA 1/" 1/" LQ1U1A LQ1UA LQUA KG /1" 1/" /" LQ1PB LQ1PC LQ1PA LQPB LQPC LQPA /1" 1/" /" LQ1UB LQ1UC LQ1UA LQUB LQUC LQUA KP 1/" 1/" /" LQ1PB LQ1PA LQ1PB LQPB LQPA LQPB 1/" 1/" /" LQ1UB LQ1UA LQ1UB LQUB LQUA LQUB KPQ /KPG /" 1/" LQ1P5A LQ1P5B LQP5A LQP5B /" 1/" LQ1U5A LQ1U5B LQU5A LQU5B KA 1" LQ1PA 1" LQ1UA /" LQ1PB Fill in with appropriate combination code when different diameter is used. Refer to page 7 for details. Union Flange /" LQ1UB Fill in with appropriate combination code when different diameter is used. Refer to page 7 for details. LQ1F KR KRM KK Metric sizes LQ1 ø LQ1F1 ø LQ1F ø19 LQ1F51 ø LQ1F5 ø5 LQ1F1 ø19 LQ1F Inch sizes KKH KKA KF KFG 1/" LQ1 LQ1FA H,DL, L,LL /" /" LQ1FB LQ1F5A M 1/" 1" /" LQ1F5B LQ1FA LQ1FB MS LQ1 /LQ

134 How to Order Tubing connection LQ1 E 11 Symbol E T P U F Fitting type Type Union elbow Union tee Panel mount union Union Union flange Combination of different diameter (on B side) Class No. tubing size () Class No. tubing size (inch) x x x x x x x x x 19 x 1 x 5 x 19 x A A B C A B A B A B A B 1/" x 0.0" 1/" x 5/" /1" x 1/" 1/" x 0.0" /" x 1/" 1/" x 5/" 1/" x /" /" x 1/" /" x 5/" 1/" x /" 1" x 7/" /" x 5/" Note) For each body class, the second and later numbers or symbols indicate reducing. However, in case of size 1, the tubing cannot be changed by reducing. Size combination Class No tubing size () x x x x x x x x x 19 x 1 x 5 x 19 x 1 Class No. A A B C A B A B A B A B tubing size (inch) 1/" x 0.0" 1/" x 5/" /1" x 1/" 1/" x 0.0" /" x 1/" 1/" x 5/" 1/" x /" /" x 1/" /" x 5/" 1/" x /" 1" x 7/" /" x 5/" flange Note 1) For each body class, the second and later numbers or symbols indicate reducing. However, in case of size 1, the tubing cannot be changed by reducing. Note ) Sizes 1 to are not available for the union flange Note ) For Union flange, nut sizes and 5 are as shown below. LQ1F: LQ-N LQ1F5: LQ-5N 15 A 0 A 5 A Symbol Refer to the applicable tubing table. Union elbow LQ1E A B Union tee LQ1T A B Application Same tubing size Different diameter tubing can be selected within the same body class. Different diameter tubing order example B Panel mount union LQ1P A B Union LQ1U A B 7 Different diameter tubing (with plug-in reducer) can be selected within the same body class. (Example) Union elbow A Body class A side: ø x ø B side: ø x ø Order as shown below. B Only select combinations from the same body class. LQ1 E 1 Different dia. tubing size (B side) tubing size (A side) Union elbow

135 High Purity Fluoropolymer Fittings Fittings Tubing connection Size combination Class 5 5 No Symbol E T P U tubing size () x x x x x x x 19 x 1 x Fitting type Type Union elbow Union tee Panel mount union Union Class 5 5 LQ E 1 No. A B C A B A B A B tubing size (inch) 1/" x 5/" /1" x 1/" 1/" x 0.0" /" x 1/" 1/" x 5/" 1/" x /" /" x 1/" /" x 5/" 1/" x /" Note) For each body class, the second and later numbers or symbols indicate reducing. How to Order Combination of different diameter (on B side) Class 5 5 No tubing size () x x x x x x x 19 x 1 x Class 5 5 No. A B C A B A B A B Note) For each body class, the second and later numbers or symbols indicate reducing. Symbol Refer to the applicable tubing table. Union elbow LQE A B Union tee LQT A B Only select combinations from the same body class. tubing size (inch) 1/" x 5/" /1" x 1/" 1/" x 0.0" /" x 1/" 1/" x 5/" 1/" x /" /" x 1/" /" x 5/" 1/" x /" Application Same tubing size Different diameter tubing can be selected within the same body class. B Panel mount union LQP A B Union LQU Different diameter tubing order example Different diameter tubing (with plug-in reducer) can be selected within the same body class. (Example) Union elbow A Body class A side: ø x ø B side: ø x ø Order as shown below. LQ E 1 Different dia. tubing size (B side) tubing size (A side) Union elbow A B B KQ /KQ KJ KS /KX KC KM KB KDM DM DMK KQG KG KP KPQ /KPG KA KR KRM KK KKH KKA KF KFG H,DL, L,LL M MS LQ1 /LQ

136 Speed Controller with One-touch Fittings Elbow Type/Universal Type : Metric Size Connection : M, R How to Order 1 AS Body size M, M5 standard 1/, 1/ standard / standard 1/ standard 1 1F 01 0 S Type Elbow Universal Control method 0 Meter-out 1 Meter-in With one-touch fitting Thread type Metric (M, M5) R Port size M M X 0.5 M5 M5 X / 0 1/ 0 / 0 1/ Electroless nickel plated specifications N Metric size ø. 0 ø 0 ø 0 ø ø ø Use a ø1/ tubing. Partly unplated All plated Electroless nickel plating is standardized for some items. Please refer to models and types for more information. Lock nut configuration K Standard (Round) Hexagon type Sealant Nil S With sealant S is not necessary with M and M5, which are not available with sealant. Gaskets are standardised instead. Elbow type Universal type Specifications Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Number of needle rotations tubing material Note ) Option indicates that electroless nickel plated model (N specification) is the standardised. Port size Elbow type Universal type cylinder tubing Metric size O.D.. Meter-out Meter-in Meter-out meter-in M X 0.5.5,, AS01F-M AS11F-M AS101F-M AS111F-M M5 X 0.,, 1, 0 AS01F-M5 AS11F-M5 AS101F-M5 AS111F-M5 R1/ 0, 5, AS01F-01 AS11F-01 AS01F-01 AS11F-01 0, 5,, 0 AS01F-0 AS11F-0 AS01F-0 AS11F-0 0, 50, AS01F-0 AS11F-0 AS01F-0 AS11F-0 0, 50, AS01F-0 AS11F-0 AS01F-0 AS11F-0, 0, 0 AS01F-0 AS11F-0 AS01F-0 AS11F-0 Note 1) Elbow type only Note ) The meter-out and meter-in types are visually distinguished by the lock nut. The lock nut of the meter-out type is electroless nickel plated while that of the meter-in type is black zinc chromate plated. 1.5 MPa 1 MPa 0.1 MPa 5 to 0 C (No freezing) rotations ( rotations Note 1) ) Nylon, Soft Nylon, Polyurethane With seal Note ), Hexagon lock nut, Electroless nickel plated specifications Note ) Note 1) In case of types AS01F-M5 and AS11F-M5. In case of types AS101F-M5 and AS111F-M5. Note ) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note ) Types with M and M5 port sizes are not available with sealant. Note ) Brass parts are all electroless nickel plated. Refer to Best Pneumatics 00 Vol. 15 for inch sizes. 9

137 Speed Controller with One-touch Fitting Speed Controller Elbow Type / Universal Type JIS symbol AS AS F ASD F AS FM. Connection M X 0.5 M5 X 0. R1/ M X 0.5 Elbow type Meter-out AS01F-M- -M5- AS01F-01- AS01F-M-0 Meter-in AS11F-M- -M5- AS11F-01- AS11F-M-0 Universal type Meter-out AS101F-M- -M5- AS01F-01- AS101F-M-0 Meter-in AS111F-M- -M5- AS11F-01- AS111F-M-0 ASD FM ASG AS FG ASD FG M5 X 0. R1/ -M5-0 AS01F-01-0S -M5-0 AS11F-01-0S -M5-0 AS01F-01-0S -M5-0 AS11F-01-0S AS FP M5 X 0. R1/ R1/ -0-0S AS01F-M5-0 AS01F-01-0S -0-0S AS01F-0-0S -0-0S AS01F-01-0S -0-0S AS01F-0-0S -0-0S -0-0S AS11F-M5-0 AS11F-01-0S -0-0S AS11F-0-0S -0-0S AS11F-01-0S -0-0S AS11F-0-0S -0-0S -0-0S AS101F-M5-0 AS01F-01-0S -0-0S AS01F-0-0S -0-0S AS01F-01-0S -0-0S AS01F-0-0S -0-0S -0-0S AS111F-M5-0 AS11F-01-0S -0-0S AS11F-0-0S -0-0S AS11F-01-0S -0-0S AS11F-0-0S -0-0S AS F AS FE ASV F ASP F AS FT R1/ AS01F-01-S -0-S AS01F-0-S -0-S AS01F-0-S AS11F-01-S -0-S AS11F-0-S -0-S AS11F-0-S AS01F-0-S AS01F-0-S -0-S AS01F-0-S AS11F-0-S AS11F-0-S -0-S AS11F-0-S ASD FT AS FD AS01F-0-S -0-S AS11F-0-S -0-S AS01F-0-S -0-S AS11F-0-S -0-S ASD FD AS01F-0-S AS11F-0-S AS01F-0-S AS11F-0-S Related Equipment Made to Order Made to Order Lubricant: Vaseline (Example) AS01F-01-0S-X Throttle Valve (Without Check Valve) (Example) AS01F-01-0S-X1 X X1 Note) Only items with meter-out part numbers are available in case of throttle valves. Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) (Example) AS01F-01-0S-X1 X1 Note 1) Not a non particle generation type. Note ) Only items with meter-out part numbers are available in case of throttle valves. Clean Series Lubricant: Fluororesin grease Double packaging (Example) -AS01F

138 Speed Controller with One-touch Fitting In-line Type : Metric Size How to Order AS01F AS001F AS051F AS001F AS001F AS Body size M5 standard 1/ standard 1/ standard / standard 1/ standard 1F Metric size With one-touch fitting ø. 0 ø 0 ø ø 0 ø ø indicates that electroless nickel plated model is standardised. Metric size. 00 cylinder tubing inside dia.,, 1, 0 0, 5, 0, 5,, 0 0, 50,, 0, 0 K Use a ø1/ tube. - Lock nut configuration Specifications Standard (Round) Hexagon type Panel mounting type Panel mounting plate thickness: Max. 5 Panel Panel nut Hexagon nut Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1)) tubing material Note ) Nylon, Soft nylon, Polyurethane Option Hexagon lock nut Note 1) In case of AS01F. Note ) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note ) Electroless nickel plated model is standardized on all metric size brass parts. In-line Type Made to Order Panel mounting type JIS symbol Inline Type. AS01F- AS01F-0 AS001F-0 AS01F-0 AS001F-0 AS051F-0 AS001F-0 Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Made to Order AS Inline Type AS051F-0 AS001F-0 AS001F- AS001F- AS001F- AS001F- Lubricant: Vaseline X Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) X1 (Example) AS001F-0-X (Example) AS001F-0-X1 Note) Not a non particle generation type. Throttle Valve (Without Check Valve) (Example) AS001F-0-X1 111 X1 Clean Series - Lubricant: Fluororesin grease, Double packaging (Example) -AS001F-0

139 Dual Speed Controller with One-touch Fitting 5 ASD0F-M5 ASD0F-01 ASD0F-0 ASD50F-0 ASD50F-0 ASD0F-0 Body size M5 standard 1/ standard 1/ standard / standard 1/ standard Port size M5 X 0. R1/ ASD Type Universal With one-touch fitting Thread type Metric system (M5) R Metric size Universal Type : Metric Size Connection : M5, R How to Order 0F 01 0 S Port size M Specifications M5 X 0. 1/ 1/ / 1/ With sealant Lock nut configuration Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1)) tubing material Note ) Nylon, Soft nylon, Polyurethane Option Hexagon lock nut Note 1) In case of ASD0F. Note ) Pay attention to the maximum operating pressure when soft nylon, polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) K Standard (Round) Hexagon type S is not required with M5, which do not have sealant. Types with gasket are standardised instead. Metric size ø ø ø ø ø Lurch Prevention Speed Controller AS F ASD F AS FM ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD Universal Type Meter-in and meter-out control. Lurch prevention. Speed control of single acting cylinder. Made to Order JIS symbol Connection Universal type M5 X 0. ASD0F-M5-0 M5 X 0. ASD0F-M5-0 R1/ ASD0F-01-0S ASD0F-0-0S ASD50F-0-0S -0-0S R1/ ASD0F-01-0S ASD0F-0-0S ASD50F-0-0S -0-0S Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Made to Order Connection ASD Universal type ASD0F-0-S ASD50F-0-S -0-S ASD0F-0-S ASD50F-0-S -0-S ASD0F-0-S ASD FD Related Equipment Lubricant: Vaseline X Clean Series - (Example) ASD0F-M5-0-X Lubricant: Fluororesin grease, Double packaging (Example) -ASD0F-M5-0 1

140 Speed Controller for Low Speed Operation with One-touch Fitting Elbow Type/Universal Type : Metric Size Connection : M5, R How to Order Low Speed Operation AS 1 1 F M 01 0 S 1 Body size M5 standard 1/, 1/ standard Type Elbow Universal Control method 0 Meter-out 1 Meter-in With one-touch fitting For low speed control Sealant S With sealant Metric size ø. ø ø ø ø Use a ø1/ tubing. S is not required with M5, which do not have sealant. Types with gasket are standardized instead. Thread type Metric system (M5) R Port size M M5 X 0. 1/ 1/ Speed control in the range of to 50 /s Elbow type Port size M5 X 0. R1/ Metric size. Elbow type Universal type Meter-out Meter-in Meter-out Meter-in AS01FM-M5 AS11FM-M5 AS101FM-M5 AS111FM-M5 AS01FM-01 AS01FM-0 AS11FM-01 AS11FM-0 AS01FM-01 AS01FM-0 AS11FM-01 AS11FM-0 Universal type Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations (0 rotations Note 1) ) tubing material Note ) Nylon, Soft nylon, Polyurethane, Soft polyurethane Option Note ) With sealant Note 1)In case of AS01FM, AS11FM, AS101FM, AS111FM. Note )Pay attention to the maximum operating pressure when soft nylon, polyurethane or soft polyurethane is used. (Refer to Best Pneumatics 00 Vol.15 for more information.) Note )Types with M5 ports are not available with sealant. Note )Brass parts are all electroless nickel plated. The knob of the M5 type and the lock nut of the meter-in type are black zinc chromate plated. Refer to Best Pneumatics 00 Vol.15 for inch sizes. 11

141 Speed Controller with One-touch Fitting for Low Speed Operation Speed Controller Elbow Type/Universal Type AS-FM AS F JIS symbol ASD F AS FM. Connection M5 X 0. R1/ M5 X 0. R1/ M5 X 0. R1/ R1/ Elbow type Meter-out AS01FM-M5- AS01FM-01-S AS01FM-M5-0 AS01FM-01-0S -0-0S AS01FM-M5-0 AS01FM-01-0S -0-0S AS01FM-01-0S -0-0S AS01FM-0-S Universal type Meter-in Meter-out AS11FM-M5- AS101FM-M5- AS11FM-01-S AS01FM-01-S AS11FM-M5-0 AS101FM-M5-0 AS11FM-01-0S AS01FM-01-0S -0-0S -0-0S AS11FM-M5-0 AS101FM-M5-0 AS11FM-01-0S AS01FM-01-0S -0-0S -0-0S AS11FM-01-0S AS01FM-01-0S -0-0S -0-0S AS11FM-0-S AS01FM-0-S Meter-in AS111FM-M5- AS11FM-01-S AS111FM-M5-0 AS11FM-01-0S -0-0S AS111FM-M5-0 AS11FM-01-0S -0-0S AS11FM-01-0S -0-0S AS11FM-0-S ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment Made to Order Made to Order Lubricant: Vaseline (Example) AS01FM-M5--X Throttle Valve (Without Check Valve) (Example) AS01FM-M5--X1 X X1 Note) Only items with meter-out part numbers are available in case of throttle valves. Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) (Example) AS01FM-M5--X1 Note 1) Not a non particle generation type. Note ) Only items with meter-out part numbers are available in case of throttle valves. Clean Series X1 - Lubricant: Fluororesin grease, Double packaging (Example) -AS01FM-M5-11

142 Speed Controller for Low Speed Operation In-line Type : Metric Size How to Order Low Speed Operation AS 00 1 F M Body size M5 standard 1/ standard 1/ standard With one-touch fitting For low speed control Metric size ø. 0 ø 0 ø 0 ø Use a ø1/ tubing. Specifications AS01FM AS001FM AS051FM Metric Size. cylinder tubing I.D.,, 1, 0 0, 5, 0, 5,, 0 Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations (0 rotations Note 1)) tubing material Note ) Nylon, Soft nylon, Polyurethane, Soft polyurethane Note 1) In case of AS01FM. Note ) Pay attention to the maximum operating pressure when soft nylon, polyurethane or soft polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note ) Brass parts are all electroless nickel plated. The knob of the M5 type are black zinc chromate plated. In-line Type Speed control in the range of to 50 /s Made to Order JIS symbol Made to Order AS-FM tubing O.D. Inline Type. AS01FM- AS01FM-0 AS001FM-0 AS01FM-0 AS001FM-0 AS051FM-0 AS051FM-0 Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Lubricant: Vaseline X Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) X1 (Example ) AS001FM-0-X (Example) AS001FM-0-X1 Note 1) Not a non particle generation type. Throttle Valve (Without Check Valve) (Example) AS001FM-0-X1 115 X1 Clean Series - Lubricant: Fluororesin grease, Double packaging (Example) -AS001FM-0

143 Dual Speed Controller for Low Speed Operation Universal Type : Metric Size Connection : M5, R Speed Controller AS F Body size M5 standard 1/ standard 1/ standard ASD How to Order Type Universal 0 F With one-touch fitting For low speed control Thread type Metric system (M5) R Low Speed Operation Lurch Prevention ASD F M 01 0 S Port size M M5 X 0. 1/ 1/ With sealant S is not required with M5, which do not have sealant. Types with gasket are standardised instead. Metric size ø ø ø ø AS FM ASD FM ASG AS FG ASD FG AS FP AS F ASD0FM-M5 ASD0FM-01 ASD0FM-0 Universal Type Port size M5 X 0. R1/ Metric size Speed control and lurch prevention in the range of to 50 /s. Low speed control of single acting cylinder. Speed control of small bore cylinder. JIS symbol Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations (0 rotations Note 1)) tubing material Note ) Nylon, Soft nylon, Polyurethane, Soft polyurethane Note 1) In case of ASD0FM. Note ) Pay attention to the maximum operating pressure when soft nylon, polyurethane or soft polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note ) Brass parts are all electroless nickel plated. The knob of the M5 type and the lock nut on the meter-in side are black zinc chromate plated. tubing O.D. Connection M5 X 0. M5 X 0. R1/ ASD-FM Universal type ASD0FM-M5-0 ASD0FM-M5-0 ASD0FM-01-0S ASD0FM-0-0S R1/ ASD0FM-01-0S ASD0FM-0-0S ASD0FM-0-S Refer to Best Pneumatics 00 Vol. 15 for inch sizes. AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment Made to Order Made to Order Lubricant: Vaseline X Clean Series - (Example) ASD0FM-M5-X Lubricant: Fluororesin grease, Double packaging (Example) -ASD0FM-M5 11

144 Stainless Steel 1 Series Speed Controller Elbow Type : Metric Size Connection : M5, R How to Order Corrosion Resistance Speed controller AS G 0 F 01 0 S Body material G Stainless steel Body size M5 1/ 1/ 5 / 1/ Type Elbow Control type 0 Meter-out 1 Meter-in With one-touch fitting Conforms to Food Sanitation Laws (Material of the component parts meets the apparatus and container packaging standards.) With seal In the case of M5, seal is inapplicable to the product. 0 ø 0 ø 0 ø ø ø Port size M5 M5 x R1/ Material: Stainless steel 1 Sealant: Special FKM Seat ring: Stainless steel 0 tubing materials FEP PFA Nylon Soft nylon Polyurethane Polyolefin Elbow type ASGF-M5 ASGF-01 ASGF-0 ASG5F-0 ASGF-0 Port size M5 x 0. R1/ () cylinder bore size (),, 1, 0 0, 5, 0, 5,, 0 0, 50,, 0, 0 Elbow type Specifications Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Number of needle rotations tubing material Air 1.5 MPa 1 MPa 0.1 MPa 5 to 0 C (No freezing) turns ( turns Note 1) ) FEP, PFA, Nylon, Soft nylon, Polyurethane Note ), Polyolefin Note 1) In case of ASGF-M5 Note ) Please be cautious of the max. operating pressure when soft nylon or polyurethane tubing is used. Note ) When polyurethane tubing is used, please use an inner sleeve. 117

145 Stainless Steel 1: Speed Controller with One-touch Fitting Speed Controller Elbow Type ASG AS F JIS Symbol Meter-out type Meter-in type ASD F AS FM ASD FM Connection Meter-out Elbow type Meter-in ASG AS FG ASD FG M5 X 0. R1/ M5 X 0. R1/ R1/ ASG0F-M5-0 ASG0F-01-0S ASG0F-M5-0 ASG0F-01-0S ASG0F-0-0S ASG0F-01-0S ASG0F-0-0S ASG50F-0-0S ASG0F-0-S ASG50F-0-S ASG50F-0-S ASG0F-0-S ASG1F-M5-0 ASG1F-01-0S ASG1F-M5-0 ASG1F-01-0S ASG1F-0-0S ASG1F-01-0S ASG1F-0-0S ASG51F-0-0S ASG1F-0-S ASG51F-0-S ASG51F-0-S ASG1F-0-S AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment 11

146 Stainless Steel Series Speed Controller with One-touch Fitting Elbow Type/Universal Type : Metric Size Connection : M5, R How to Order Corrosion Resistance AS 1 1 F G 01 0 S 1 Body size M5 standard 1/, 1/ standard / standard 1/ standard Type Elbow Universal Control type 0 1 Meter-out Meter-in With one-touch fitting Stainless steel specifications (Stainless steel 0) Thread type Metric system (M5) R Port size M M5 X 0. 1/ 1/ / 1/ Sealant S With sealant S is not required with M5, which do not have sealant. Types with gasket are standardised instead. Metric size ø. 0 ø 0 ø 0 ø ø ø Use a ø1/ tubing. Use of Stainless steel 0 for metal parts. Elbow type Port size Elbow type Universal type cylinder tubing Metric size I.D.. Meter-out Meter-in Meter-out Meter-in M5 X 0.,, 1, 0 AS01FG-M5 AS11FG-M5 AS101FG-M5 AS111FG-M5 R1/ 0, 5, AS01FG-01 0, 5,, 0 AS01FG-0 AS11FG-01 AS01FG-01 AS11FG-0 AS01FG-0 AS11FG-01 AS11FG-0 0, 50, 0, 50, AS01FG-0 AS01FG-0 AS11FG-0 AS01FG-0 AS11FG-0 AS01FG-0 AS11FG-0 AS11FG-0, 0, 0 AS01FG-0 AS11FG-0 AS01FG-0 AS11FG-0 Note 1) The meter-in and meter-out types are visually distinguished by the flow direction symbol on the resin body. Note ) Elbow type only. Universal type Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1)) tubing material Note ) Nylon, Soft nylon, Polyurethane, Soft polyurethane Note 1) In case of AS01FG, AS11FG, AS101FG, AS111FG. Note ) Pay attention to the maximum operating pressure when soft nylon, polyurethane or soft polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Refer to Best Pneumatics 00 Vol. 15 for inch sizes. 119

147 Stainless Steel: Speed Controller with One-touch Fitting Speed Controller Elbow Type/Universal Type JIS symbol AS-FG AS F ASD F AS FM. Connection M5 X 0. R1/ M5 X 0. R1/ M5 X 0. R1/ R1/ R1/ Elbow type Meter-out AS01FG-M5- AS01FG-01-S AS01FG-M5-0 AS01FG-01-0S -0-0S AS01FG-M5-0 AS01FG-01-0S -0-0S AS01FG-0-0S -0-0S AS01FG-01-0S -0-0S AS01FG-0-0S -0-0S AS01FG-01-S -0-S AS01FG-0-S -0-S AS01FG-0-S AS01FG-0-S -0-S AS01FG-0-S Universal type Meter-in Meter-out AS11FG-M5- AS101FG-M5- AS11FG-01-S AS01FG-01-S AS11FG-M5-0 AS101FG-M5-0 AS11FG-01-0S AS01FG-01-0S -0-0S -0-0S AS11FG-M5-0 AS101FG-M5-0 AS11FG-01-0S AS01FG-01-0S -0-0S -0-0S AS11FG-0-0S AS01FG-0-0S -0-0S -0-0S AS11FG-01-0S AS01FG-01-0S -0-0S -0-0S AS11FG-0-0S AS01FG-0-0S -0-0S -0-0S AS11FG-01-S -0-S AS01FG-0-S AS11FG-0-S AS01FG-0-S -0-S -0-S AS11FG-0-S AS01FG-0-S AS11FG-0-S AS01FG-0-S -0-S -0-S AS11FG-0-S AS01FG-0-S Meter-in AS111FG-M5- AS11FG-01-S AS111FG-M5-0 AS11FG-01-0S -0-0S AS111FG-M5-0 AS11FG-01-0S -0-0S AS11FG-0-0S -0-0S AS11FG-01-0S -0-0S AS11FG-0-0S -0-0S AS11FG-0-S AS11FG-0-S -0-S AS11FG-0-S AS11FG-0-S -0-S AS11FG-0-S ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment Made to Order Made to Order Lubricant: Vaseline (Example) AS01FG-M5--X Throttle Valve (Without Check Valve) (Example) AS01FG-M5--X1 X X1 Note) Only items with meter-out part numbers are available in case of throttle valves. Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) (Example) AS01FG-M5--X1 Note 1) Not a non particle generation type Note ) Only items with meter-out part numbers are available in case of throttle valves. Clean Series X1 - Lubricant: Fluororesin grease, Double packaging (Example) -AS01FG-M5-0

148 Stainless Steel Series Speed Controller with One-touch Fitting In-line Type : Metric Size How to Order Corrosion Resistantce AS 00 1 F G Body size M5 standard 1/ standard 1/ standard / standard 1/ standard With one-touch fitting Stainless steel specifications (Stainless steel 0) Metric size ø. 0 ø 0 ø 0 ø ø ø Use a ø1/ tubing. AS01FG AS001FG AS051FG AS001FG AS001FG Metric size. cylinder tubing I.D.,, 1, 0 0, 5, 0, 5,, 0 0, 50,, 0, 0 Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1) ) tubing material Note ) Nylon, Soft nylon, Polyurethane, Soft polyurethane Note 1) In case of AS01FG. Note ) Pay attention to the maximum operating pressure when soft nylon, polyurethane or soft polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) In-line Type Use of Stainless steel 0 for metal parts. JIS symbol. Inline type AS01FG- AS01FG-0 AS001FG-0 AS01FG-0 AS001FG-0 AS051FG-0 AS001FG-0 Refer to Best Pneumatics 00 Vol. 15 for inch sizes. AS-FG Inline type AS051FG-0 AS001FG-0 AS001FG- AS001FG- AS001FG- AS001FG- Made to Order Made to Order Lubricant:Vaseline X Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) X1 (Example) AS01FG-0-X (Example) AS01FG-0-X1 Note1)Not a non particle generation type. Throttle Valve (Without Check Valve) (Example) AS01FG-0-X1 1 X1 Clean Series - Lubricant: Fluororesin grease, Double packaging (Example) -AS01FG-0

149 Stainless Steel Series Dual Speed Controller with One-touch Fitting Universal Type : Metric Size Connection : M5, R Speed Controller AS F Corrosion Resistance Lurch Prevention ASD F How to Order AS FM 5 Body size M5 standard 1/ standard 1/ standard / standard 1/ standard ASD 0FG 01 0 S Type Universal With one-touch fitting Stainless steel specifications (Stainless steel 0) Thread type Metric system (M5) R Port size M5 M5 X / 0 1/ 0 / 0 1/ With sealant S is not required with M5, which do not have sealant. Types with gasket are standardised instead. Metric size ø ø ø ø ø ASD FM ASG AS FG ASD FG AS FP AS F ASD0FG-M5 ASD0FG-01 ASD0FG-0 ASD50FG-0 ASD50FG-0 ASD0FG-0 Port size M5 X 0. R1/ Metric size Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1)) tubing material Note ) Nylon, Soft nylon, Polyurethane, Soft polyurethane Note 1) In case of ASD0FG. Note ) Pay attention to the maximum operating pressure when soft nylon, polyurethane or soft polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) AS FE ASV F ASP F AS FT ASD FT AS FD Universal Type Use of Stainless steel 0 for metal parts. Lurch prevention. Speed control of single acting cylinder. Made to Order JIS symbol Connection Universal type M5 X 0. ASD0FG-M5-0 M5 X 0. ASD0FG-M5-0 R1/ ASD0FG-01-0S ASD0FG-0-0S ASD50FG-0-0S -0-0S R1/ ASD0FG-01-0S ASD0FG-0-0S ASD50FG-0-0S -0-0S Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Made to Order Connection ASD-FG Universal type ASD0FG-0-S ASD50FG-0-S -0-S ASD0FG-0-S ASD50FG-0-S -0-S ASD0FG-0-S ASD FD Related Equipment Lubricant: Vaseline X Clean Series - (Example) ASD0FG-M5-0-X Lubricant: Fluororesin grease, Double packaging (Example) -ASD0FG-M5-0

150 Speed Controller for Clean Room Elbow Type : Metric Size Connection : M5, R How to Order Clean AS 1 1 F P Q Body size M5 standard 1/, 1/ standard / standard 1/ standard AS-FPQ/Brass (Electroless nickel plated) Release button color: Light grey Type Elbow Control method 0 Meter-out 1 Meter-in Metric size ø ø ø ø ø With one-touch fitting Q G Clean specification Metal part material Brass (Electroless nickel plated) Stainless steel (Stainles steel 0) Port size M M5 X 0. 1/ 1/ / 1/ AS-FPG/Stainless steel (Stainless steel 0) Release button color: Light blue Port size M5 X 0. R1/ Metric size cylinder tubing I.D.,, 1, 0 0, 5, 0, 5,, 0 0, 50,, 0, 0 Elbow type Meter-out Meter-in AS01FP-M5 AS11FP-M5 AS01FP-01 AS11FP-01 AS01FP-0 AS11FP-0 AS01FP-0 AS11FP-0 AS01FP-0 AS11FP-0 Particle Generation Grade Classifications Average particle concentration particles/ft Grade Grade Grade Grade Particle Diameter µm or less Note) For more information, refer to SMC Clean Series Catalogue. Specifications Particle generation grade Proof pressure (0 C) Max. operating pressure (0 C) Min. operating pressure Ambient and fluid temperature Number of needle rotations Note 1) Refer to the particle generation grading chart. Note ) The max. operating pressure is one at 0 C. Note ) AS1FP Recoended Tubing Grade 1 Note 1) 1.5 MPa 1 MPa Note ) 0.1 MPa 5 to 0 C (No freezing) rotations ( rotations Note )) Tubing material Clean series polyurethane tubing: Series - Tubing O.D. ø, ø, ø, ø, ø Polyurethane tubing: Series TU, Nylon tubing: Series T, Soft nylon tubing: Series TS can also be used though with lower degree of cleanliness.

151 Clean Speed Controller with One-touch Fitting Speed Controller Elbow Type AS-FPQ/FPG AS F JIS symbol ASD F AS FM AS-FPQ/Brass (Electroless Nickel Plated) Connection M5 X 0. R1/ M5 X 0. R1/ R1/ Connection Meter-out AS01FPQ-M5-0 AS01FPQ AS01FPQ-M5-0 AS01FPQ AS01FPQ-0-0 AS01FPQ AS01FPQ-0-0 AS01FPQ-0- AS01FPQ-0- AS01FPQ-0- AS01FPQ-0- AS01FPQ-0- Meter-out AS01FPG-M5-0 AS01FPG AS01FPG-M5-0 AS01FPG AS01FPG-0-0 AS01FPG AS01FPG-0-0 AS01FPG-0- AS01FPG-0- AS01FPG-0- AS01FPG-0- AS01FPG-0- Elbow type AS-FPG/Stainless Steel (Stainless steel 0) M5 X 0. R1/ M5 X 0. R1/ R1/ Elbow type Meter-in AS11FPQ-M5-0 AS11FPQ AS11FPQ-M5-0 AS11FPQ AS11FPQ-0-0 AS11FPQ AS11FPQ-0-0 AS11FPQ-0- AS11FPQ-0- AS11FPQ-0- AS11FPQ-0- AS11FPQ-0- Meter-in AS11FPG-M5-0 AS11FPG AS11FPG-M5-0 AS11FPG AS11FPG-0-0 AS11FPG AS11FPG-0-0 AS11FPG-0- AS11FPG-0- AS11FPG-0- AS11FPG-0- AS11FPG-0- ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment

152 Metal Elbow Speed Controller with Built-in One-touch Fitting Elbow Type : Metric Size Connection : M5, R How to Order Spatter Proof 1 AS Body size M5 standard 1/, 1/ standard / standard 1/ standard F S Elbow type Control method 0 Meter-out 1 Meter-in M Thread M5 X 0. R1/ K With one-touch fitting Lock nut configuration With sealant Electroless nickel plated specifications N Partly unplated All plated Standard (Round) Hexagon lock nut S is not required with M5, which do not have sealant. Types with gasket are standardised instead. Tubing port size 0 ø 0 ø 0 ø ø ø Use of flame resistant resin for one-touch fittings. (Equivalent to UL-9 Standards V-0) Elbow type Port size M5 X 0. R1/ Metric size indicates that electroless nickel plated model (N specification) is the standardised. cylinder tubing I.D.,, 1, 0 0, 5, 0, 5,, 0 0, 50,, 0, 0 Meter-out AS01-M5 AS01-01 AS01-0 AS01-0 AS01-0 Elbow type Meter-in AS11-M5 AS11-01 AS11-0 AS11-0 AS11-0 Specifications Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Number of needle rotations tubing material Option 1.5 MPa 1 MPa 0.1 MPa 5 to 0 C (No freezing) rotations ( rotations Note 1)) Nylon, Soft nylon, Polyurethane Hexagon lock nut, Electroless nickel plated specifications Note ) The meter-in and meter-out types are visually distinguished by the lock nut. The lock nut of the meter-out type is electroless nickel plated while that of the meter-in type is black zinc chromate plated. Note 1) In case of size M5. Note ) Brass parts are all electroless nickel plated. 5

153 Metal Body: Speed Controller with Built-in One-touch Fitting Speed Controller Elbow Type AS AS F JIS symbol ASD F AS FM Connection M5 X 0. Elbow type Meter-out AS01-M5-F0 Meter-in AS11-M5-F0 ASD FM ASG AS FG M5 X 0. R1/ AS01-M5-F0 AS01-01-F0S AS11-M5-F0 AS11-01-F0S ASD FG -0-F0S -0-F0S R1/ AS01-01-F0S -0-F0S AS01-0-F0S AS01-0-FS AS01-0-FS AS01-0-FS AS11-01-F0S -0-F0S AS11-0-F0S AS11-0-FS AS11-0-FS AS11-0-FS AS FP AS F AS FE Made to Order Made to Order ASV F ASP F AS FT Lubricant: Vaseline (Example) AS01-M5-F0-X X Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) (Example) AS01-M5-F0-X1 Note 1) Not a non particle generation type. Note ) Only items with meter-out part numbers are available in case of throttle valves. Throttle Valve (Without Check Valve) X1 Clean Series - X1 ASD FT AS FD ASD FD (Example) AS01-M5-F0-X1 Note) Only items with meter-out part numbers are available in case of throttle valves. Lubricant: Fluororesin grease, Double packaging (Example) -AS01-M5-F0 Related Equipment

154 Speed Controller with Residual Pressure Exhaust Valve How to Order Elbow Type/Universal Type : Metric Size Connection : R Residual Pressure Exhaust AS 1 1F E 01 0 SK Body size 1/, 1/ standard / standard 1/ standard Hexagon lock nut With sealant Type Elbow Universal Control method 0 Meter-out 1 Meter-in With one-touch fitting With residual pressure exhaust valve Metric size Port size 01 R1/ ø ø ø ø ø Residual pressure exhaust from cylinder. Residual pressure easily exhausted with one push. Elbow type Port size Elbow type Universal type cylinder tubing Metric size I.D. Meter-out Meter-in Meter-out Meter-in R1/ 0, 5, AS01FE-01 AS11FE-01 AS01FE-01 AS11FE-01 0, 5,, 0 AS01FE-0 AS11FE-0 AS01FE-0 AS11FE-0 0, 50, AS01FE-0 AS11FE-0 AS01FE-0 AS11FE-0, 0, 0 AS01FE-0 AS11FE-0 AS01FE-0 AS11FE-0 Note 1) Elbow type only. Note ) Visual distinction between meter-out and meter-in types. The meter-out and meter-in types can be visually distinguished by the lock nut. The lock nut of the meter-out type is electroless nickel plated while that of the meter-in type is black zinc chromate plated. Universal type Specifications Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Number of needle rotations Effective sectional area of residual pressure exhaust valve tubing material 1.5 MPa 1 MPa 0.1 MPa 5 to 0 C (No freezing) rotations 0. Nylon, Soft nylon, Polyurethane 7

155 Speed Controller with Residual Pressure Exhaust Valve Speed Controller Elbow Type/Universal Type JIS symbol ASFE AS F ASD F AS FM Connection R1/ R1/ R1/ R1/ Elbow type Meter-out AS01FE-01-0SK -0-0SK AS01FE-01-0SK -0-0SK AS01FE-0-0SK AS01FE-01-0SK -0-0SK AS01FE-0-0SK AS01FE-01-SK -0-SK AS01FE-0-SK AS01FE-0-SK AS01FE-0-SK AS01FE-0-SK Universal type Meter-in Meter-out AS11FE-01-0SK AS01FE-01-0SK -0-0SK -0-0SK AS11FE-01-0SK AS01FE-01-0SK -0-0SK -0-0SK AS11FE-0-0SK AS01FE-0-0SK AS11FE-01-0SK AS01FE-01-0SK -0-0SK -0-0SK AS11FE-0-0SK AS01FE-0-0SK AS11FE-01-SK -0-SK AS01FE-0-SK AS11FE-0-SK AS01FE-0-SK AS11FE-0-SK AS01FE-0-SK AS11FE-0-SK AS01FE-0-SK AS11FE-0-SK AS01FE-0-SK Meter-in AS11FE-01-0SK -0-0SK AS11FE-01-0SK -0-0SK AS11FE-0-0SK AS11FE-01-0SK -0-0SK AS11FE-0-0SK AS11FE-0-SK AS11FE-0-SK AS11FE-0-SK AS11FE-0-SK AS11FE-0-SK ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment Made to Order Made to Order Lubricant: Vaseline (Example) AS01FE-01-0SK-X Throttle Valve (Without Check Valve) (Example) AS01FE-01-0SK-X1 X X1 Note) Only items with meter-out part numbers are available in case of throttle valves. Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) (Example) AS01FE-01-0SK-X1 X1 Note 1) Not a non particle generation type. Note ) Only items with meter-out part numbers are available in case of throttle valves.

156 Speed Exhaust Controller Elbow Type/Tee Type : Metric Size Connection : M,R How to Order Quick Exhaust 1 5 Body size M standard M5 standard 1/ standard 1/ standard / standard ASV0F-M ASV0F-M5 ASVF-01 ASVF-0 ASVF-01 ASVF-0 ASVF-0 ASV5F-0 ASV5F-0 ASV5F-0 1 ASV Union tee Elbow Note1) Note 1) Only M and M5 for the elbow type. Port size M X 0.5 M5 X 0. R1/ R1/ 1 0 F With one-touch fitting M M Port size M X 0.5 M5 X 0. R1/ Metric size ø 0 ø 0 ø ø ø Specifications S Sealant Symbol Nil S Sealant Without sealant With sealant Lock nut configuration Spatter cover Nil C With spatter cover Only available to ASVF, F and 5F. model ASV0F, 0F ASVF, F, 5F Series ASV0F ASV0F ASVF, F ASV5F Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature 1.5 MPa 1 MPa 0.1 MPa 5 to 0 C (No freezing) Number of needle rotations rotations rotations rotations 15 rotations tubing material Note 1) Nylon, Soft nylon, Polyurethane Option Hexagon lock nut With spatter cover, Hexagon lock nut Note 1) Pay attention to the maximum operating pressure when soft nylon, polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Nil K Standard (Round) Hexagon type Elbow Type/Tee Type Integration of a quick exhaust valve and an exhaust restrictor. Permits high-speed cylinder operation. Made to Order Elbow type JIS symbol EXH IN OUT Tee type Connection Elbow type M X 0.5 ASV0F-M-0 M5 X 0. ASV0F-M5-0 M5 X 0. ASV0F-M5-0 Connection R1/ R1/ R1/ Made to Order Tee type ASVF-01-0S -0-0S ASVF-01-0S -0-0S ASVF-01-0S Connection R1/ ASV Tee type ASVF-0-0S -0-0S ASVF-01-S -0-S -0-S ASV5F-0-S -0-S -0-S ASV5F-0-S -0-S -0-S Lubricant: Vaseline (Example) ASV0F-M-0-X 9 X

157 Speed Controller with Pilot Check Valve Port size Metric size Pilot port ASP0F-01 ASP0F-0 ASP50F-0 ASP0F-0 R1/ M5 X 0. Rc1/ Rc1/ Rc1/ Note) Brass parts are all electroless nickel plated. Universal Type Built-in pilot check valve to prevent drop down. Temporary intermediate stop. Emergency stop. Connection (b) ASP Pilot check valve Body size 5 1/ Standard 1/ Standard / Standard 1/ Standard Type Universal With one-touch fitting JIS symbol Universal Type Tubing O.D.: Metric Size Connection : R How to Order 0F 01 0 S Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Pilot check valve operating pressure 50% or more the operating pressure Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations tubing material Nylon, Soft nylon, Polyurethane Note) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) With sealant Metric size 0 0 Port size Symbol Cylinder side 01 R1/ Connection (a) ø ø ø ø Pilot port M5 X 0. Rc1/ Rc1/ Rc1/ Connection (b) Drop Prevention ASP Universal type R1/ M5 X 0. ASP0F-01-0S Rc1/ ASP0F-0-0S R1/ M5 X 0. ASP0F-01-0S Rc1/ ASP0F-0-0S Rc1/ ASP50F-0-0S Rc1/ ASP50F-0-S Rc1/ ASP0F-0-S Rc1/ ASP0F-0-S Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Speed Controller AS F ASD F AS FM ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment Connection (a) Made to Order Lubricant: Vaseline (Example) ASP0F-01-0S-X Made to Order X 10

158 Tamper Proof Speed Controller Elbow Type/Universal Type : Metric Size Connection : M5, R How to Order AS 1 1 F 01 0 S T 1 Body size M5 standard 1/, 1/ standard / standard 1/ standard Type Elbow Universal Control method 0 Meter-out 1 Meter-in With one-touch fitting Port size M5 M5 X R1/ Tamper proof type Note)Flow control requires special tools, which must be procured separately ( number: AS-T-1). With sealant Note)S is not necessary in case of types with a M5 port, which do not have sealant. Types with gasket are standardised. Metric size ø. 0 ø 0 ø 0 ø ø ø Use ø1/ tube. Flow rate control with special tools for safety measures. Elbow type Elbow type Universal type cylinder Port size Metric size tubing I.D.. Meter-out Meter-in Meter-out Meter-in M5 X 0.,, 1, 0 AS01F-M5 AS11F-M5 AS101F-M5 R1/ 0, 5, AS01F-01 AS11F-01 AS01F-01 0, 5,, 0 AS01F-0 AS11F-0 AS01F-0 0, 50, AS01F-0 AS11F-0 AS01F-0 0, 50, AS01F-0 AS11F-0 AS01F-0, 0, 0 AS01F-0 AS11F-0 AS01F-0 Note 1) Elbow type only. Note ) The meter-in and meter-out types are visually distinguished by the flow direction symbol on the resin body. AS111F-M5 AS11F-01 AS11F-0 AS11F-0 AS11F-0 AS11F-0 Universal type Special tool (AS-T-1) Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note1) ) tubing material Note ) Nylon, Soft nylon, Polyurethane Note1) In case of AS01F-M5 and AS11F-M5 types. In case of AS101F-M5 and AS111F-M5 types. Note) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note) Brass parts of standard products are all electroless nickel plated. Refer to Best Pneumatics 00 Vol. 15 for inch sizes. 11

159 Tamper Proof Speed Controller with One-touch Fitting Speed Controller Elbow Type/Universal Type JIS symbol AS1F-T AS F ASD F AS FM. Connection M5 X 0. R1/ M5 X 0. R1/ M5 X 0. R1/ R1/ R1/ Elbow type Meter-out AS01F-M5-T AS01F-01-ST AS01F-M5-0T AS01F-01-0ST -0-0ST AS01F-M5-0T AS01F-01-0ST -0-0ST AS01F-0-0ST -0-0ST AS01F-01-0ST -0-0ST AS01F-0-0ST -0-0ST AS01F-01-ST -0-ST AS01F-0-ST -0-ST AS01F-0-ST AS01F-0-ST -0-ST AS01F-0-ST Universal type Meter-in Meter-out AS11F-M5-T AS101F-M5-T AS11F-01-ST AS01F-01-ST AS11F-M5-0T AS101F-M5-0T AS11F-01-0ST AS01F-01-0ST -0-0ST -0-0ST AS11F-M5-0T AS101F-M5-0T AS11F-01-0ST AS01F-01-0ST -0-0ST -0-0ST AS11F-0-0ST AS01F-0-0ST -0-0ST -0-0ST AS11F-01-0ST AS01F-01-0ST -0-0ST -0-0ST AS11F-0-0ST AS01F-0-0ST -0-0ST -0-0ST AS11F-01-ST -0-ST AS01F-0-ST AS11F-0-ST AS01F-0-ST -0-ST -0-ST AS11F-0-ST AS01F-0-ST AS11F-0-ST AS01F-0-ST -0-ST -0-ST AS11F-0-ST AS01F-0-ST Meter-in AS111F-M5-T AS11F-01-ST AS111F-M5-0T AS11F-01-0ST -0-0ST AS111F-M5-0T AS11F-01-0ST -0-0ST AS11F-0-0ST -0-0ST AS11F-01-0ST -0-0ST AS11F-0-0ST -0-0ST AS11F-0-ST AS11F-0-ST -0-ST AS11F-0-ST AS11F-0-ST -0-ST AS11F-0-ST ASD FM ASG AS FG ASD FG AS FP AS F AS FT AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment Made to Order Made to Order Lubricant: Vaseline (Example) AS01F-M5-T-X Throttle Valve (Without Check Valve) (Example) AS01F-M5-T-X1 X X1 Note) Only items with meter-out part numbers are available in case of throttle valves. Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) (Example) AS01F-M5-T-X1 Note 1) Not a non particle generation type. Note ) Only items with meter-out part numbers are available in case of throttle valves. Clean Series X1 - Lubricant: Fluororesin grease, Double packaging (Example) -AS01F-M5-T 1

160 Tamper Proof Speed Controller In-line Type : Metric Size How to Order AS 00 1F 0 T AS01F AS001F AS051F AS001F AS001F Metric size Body size M5 standard 1/ standard 1/ standard / standard 1/ standard Metric size With one-touch fitting ø. 0 ø 0 ø ø 0 ø ø cylinder tubing I.D.,, 1, 0 0, 5, 0, 5,, 0 0, 50,, 0, 0 Specifications Use ø1/ tube. Tamper proof type Note) Flow control requires special tools, which must be procured separately (reference number: AS-T-1). Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1) ) Note ) tubing material Nylon, Soft nylon, Polyurethane Note 1) In case of type AS01F. Note ) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) In-line Type AS1F-T Flow control with special tools. For safety measures. Made to Order JIS symbol Special tool (AS-T-1). In-line type AS01F-T AS01F-0T AS001F-0T AS01F-0T AS001F-0T AS051F-0T AS001F-0T Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Made to Order In-line type AS051F-0T AS001F-0T AS001F-T AS001F-T AS001F-T AS001F-T lubricant: Vaseline X Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) X1 (Example) AS01F-T-X (Example) AS01F-T-X1 Note 1) Not a non particle generation type. Throttle Valve (Without Check Valve) (Example) AS01F-T-X1 1 X1 Clean Series - Lubricant: Fluororesin grease, Double packaging (Example) -AS01F-T

161 Tamper Proof Dual Speed Controller 5 ASD0F-M5 ASD0F-01 ASD0F-0 ASD50F-0 ASD50F-0 ASD0F-0 Body size M5 standard 1/ standard 1/ standard / standard 1/ standard Port size M5 X 0. R1/ ASD 0 How to Order Type Universal With one-touch fitting Port size Metric size M F M5 X 0. R1/ Specifications Universal Type : Metric Size Connection : M5, R 01 0 S T Metric size Tamper proof type Note) Flow control requires special tools, which must be procured separately ( number: AS-T-1). With sealant Note) S is not necessary in case of types with a M5 port, which do not have sealant. Types with gasket are standardised. ø ø ø ø ø Lurch Prevention Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1) ) Note ) tubing material Nylon, Soft nylon, Polyurethane Note 1) In case of ASD0F. Note ) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note ) Brass parts of standard products are all electroless nickel plated. Speed Controller AS F ASD F AS FM ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT ASD FT Universal Type Lurch prevention. Speed control of single acting cylinder. Flow rate control with special tools. For safety measures. JIS symbol Connection Universal type M5 X 0. ASD0F-M5-0T M5 X 0. ASD0F-M5-0T R1/ ASD0F-01-0ST ASD0F-0-0ST ASD50F-0-0ST -0-0ST R1/ ASD0F-01-0ST ASD0F-0-0ST ASD50F-0-0ST -0-0ST Refer to Best Pneumatics 00 Vol. 15 for inch sizes. ASDF-T Connection Universal type ASD0F-0-ST ASD50F-0-ST -0-ST ASD0F-0-ST ASD50F-0-ST -0-ST ASD0F-0-ST AS FD ASD FD Related Equipment Made to Order Made to Order lubricant: Vaseline X Clean Series - (Example) ASD0F-M5-0T-X Lubricant: Fluororesin grease, Double packaging (Example) -ASD0F-M5-0T 1

162 Flat Head Screw Driver Adjustable Speed Controller Elbow Type/Universal Type : Metric Size Connection : M5, R How to Order AS 1 1 F 01 0 S D 1 Body size M5 standard 1/, 1/ standard / standard 1/ standard Type Elbow Universal Control method 0 Meter-out 1 Meter-in With one-touch fitting Port size M5 M5 X R1/ Metric size ø. 0 ø 0 ø 0 ø ø ø Use ø1/ tubing. Flat head screw driver adjustment type With sealant Note) S is not necessary in case of types with a M5 port, which do not have sealant. Types with gasket are standardised. Flow adjustment with flat head screw driver. For safety measures. Elbow type Universal type Elbow type Universal type cylinder Port size Metric size tubing I.D.. Meter-out Meter-in Meter-out Meter-in M5 X 0.,, 1, 0 AS01F-M5 AS11F-M5 AS101F-M5 R1/ 0, 5, AS01F-01 AS11F-01 AS01F-01 0, 5,, 0 AS01F-0 AS11F-0 AS01F-0 0, 50, AS01F-0 AS11F-0 AS01F-0 0, 50, AS01F-0 AS11F-0 AS01F-0, 0, 0 AS01F-0 AS11F-0 AS01F-0 Note 1) Elbow type only. Note ) The meter-out and meter-in types can be visually determined by the flow direction symbol on the resin body. Specifications Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1) ) tubing material Note ) Nylon, Soft nylon, Polyurethane Note 1) In case of types AS01F-M5 and AS11F-M5. In case of types AS101F-M5 and AS111F-M5. Note ) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note ) Brass parts of standard products are all electroless nickel plated. AS111F-M5 AS11F-01 AS11F-0 AS11F-0 AS11F-0 AS11F-0 Refer to Best Pneumatics 00 Vol. 15 for inch sizes. 15

163 Flat Head Screw Driver Adjustable Speed Controller with One-touch fitting Speed Controller Elbow Type/Universal Type JIS symbol AS1F-D AS F ASD F AS FM. Connection M5 X 0. R1/ M5 X 0. R1/ M5 X 0. R1/ R1/ R1/ Elbow type Meter-out AS01F-M5-D AS01F-01-SD AS01F-M5-0D AS01F-01-0SD -0-0SD AS01F-M5-0D AS01F-01-0SD -0-0SD AS01F-0-0SD -0-0SD AS01F-01-0SD -0-0SD AS01F-0-0SD -0-0SD AS01F-01-SD -0-SD AS01F-0-SD -0-SD AS01F-0-SD AS01F-0-SD -0-SD AS01F-0-SD Universal type Meter-in Meter-out AS11F-M5-D AS101F-M5-D AS11F-01-SD AS01F-01-SD AS11F-M5-0D AS101F-M5-0D AS11F-01-0SD AS01F-01-0SD -0-0SD -0-0SD AS11F-M5-0D AS101F-M5-0D AS11F-01-0SD AS01F-01-0SD -0-0SD -0-0SD AS11F-0-0SD AS01F-0-0SD -0-0SD -0-0SD AS11F-01-0SD AS01F-01-0SD -0-0SD -0-0SD AS11F-0-0SD AS01F-0-0SD -0-0SD -0-0SD AS11F-01-SD -0-SD AS01F-0-SD AS11F-0-SD AS01F-0-SD -0-SD -0-SD AS11F-0-SD AS01F-0-SD AS11F-0-SD AS01F-0-SD -0-SD -0-SD AS11F-0-SD AS01F-0-SD Meter-in AS111F-M5-D AS11F-01-SD AS111F-M5-0D AS11F-01-0SD -0-0SD AS111F-M5-0D AS11F-01-0SD -0-0SD AS11F-0-0SD -0-0SD AS11F-01-0SD -0-0SD AS11F-0-0SD -0-0SD AS11F-0-SD AS11F-0-SD -0-SD AS11F-0-SD AS11F-0-SD -0-SD AS11F-0-SD ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F AS FD ASP F AS FT ASD FT AS FD ASD FD Related Equipment Made to Order Made to Order Lubricant: Vaseline (Example) AS01F-M5-D-X Throttle Valve (Without Check Valve) (Example) AS01F-M5-D-X1 X X1 Note) Only items with meter-out part numbers are available in case of throttle valves. Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) (Example) AS01F-M5-D-X1 Note 1) Not a non particle generation type. Note ) Only items with meter-out part numbers are available in case of throttle valves. Clean Series X1 - Lubricant: Fluororesin grease, Double packaging (Example) -AS01F-M5-D 1

164 Flat Head Screw Driver Adjustable Speed Controller In-line Type : Metric Size How to Order AS 00 1F 0 D AS01F AS001F AS051F AS001F AS001F Metric size Body size M5 standard 1/ standard 1/ standard / standard 1/ standard With one-touch fitting cylinder tubing I.D.,, 1, 0 0, 5, 0, 5,, 0 0, 50,, 0, 0 Specifications Flat head screw driver adjustment type Metric size ø. 0 ø 0 ø 0 ø ø ø Use ø1/ tubing. Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1) ) Note ) tubing material Nylon, Soft nylon, Polyurethane Note 1) In case of type AS01F. Note ) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) In-line Type AS1F-D Flow adjustment with flat head screw driver. For safety measures. Made to Order JIS symbol In-line type. AS01F-D AS01F-0D AS001F-0D AS01F-0D AS001F-0D AS051F-0D AS001F-0D Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Made to Order In-line type AS051F-0D AS001F-0D AS001F-D AS001F-D AS001F-D AS001F-D lubricant: Vaseline X Oil Free (Sealant: PTFE Coated) + Without Check Valve (Throttle Valve) X1 (Example) AS01F-D-X (Example) AS01F-D-X1 Note 1) Not a non particle generation type. Throttle Valve (Without Check Valve) (Example) AS01F-D-X1 17 X1 Clean Series Lubricant: Fluororesin grease, Double package (Example) -AS01F-D -

165 Flat Head Screw Driver Adjustable Dual Speed Controller 5 ASD0F-M5 ASD0F-01 ASD0F-0 ASD50F-0 ASD50F-0 ASD0F-0 Body size M5 standard 1/ standard 1/ standard / standard 1/ standard Port size M5 X 0. R1/ Metric size How to Order ASD 0 F 01 0 S D Type Universal With one-touch fitting M Port size M5 X 0. R1/ Specifications Universal Type : Metric Size Connection : M5, R Flat head screw driver adjustment type With sealant Note) S is not necessary in case of types with a M5 port, which do not have sealant. Types with gasket are standardised. Metric size ø ø ø ø ø Lurch Prevention Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa Ambient and fluid temperature 5 to 0 C (No freezing) Number of needle rotations rotations ( rotations Note 1) ) Note ) tubing material Nylon, Soft nylon, Polyurethane Note 1) In case of type ASD0F. Note ) Pay attention to the maximum operating pressure when soft nylon or polyurethane is used. (Refer to Best Pneumatics 00 Vol. 15 for more information.) Note ) Brass parts of standard products are all electroless nickel plated. Speed Controller AS F ASD F AS FM ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT ASD FT Universal Type Lurch prevention. Speed control of single acting cylinder. Flow adjustment with flat head screw driver. For safety measures. JIS symbol Connection Universal type ASD0F-M5-0D ASDF-D Connection M5 X 0. M5 X 0. ASD0F-M5-0D R1/ ASD0F-01-0SD ASD0F-0-0SD ASD50F-0-0SD -0-0SD R1/ ASD0F-01-0SD ASD0F-0-0SD ASD50F-0-0SD -0-0SD Refer to Best Pneumatics 00 Vol. 15 for inch sizes. Universal type ASD0F-0-SD ASD50F-0-SD -0-SD ASD0F-0-SD ASD50F-0-SD -0-SD ASD0F-0-SD AS FD ASD FD Related Equipment Made to Order Made to Order Lubricant: Vaseline X Clean Series - (Example) ASD0F-M5-0D-X Lubricant: Fluororesin grease, Double package (Example) -ASD0F-M5-0D 1

166 Speed Controller with One-touch Fitting Related Equipment Residual Pressure Exhaust Valve with One-touch Fitting Residual pressure inside the cylinder is released to the atmosphere by pressing the button. Without push button guard With one-touch fitting With push button guard With one-touch fitting Series KE Residual Pressure Exhaust With push button guard Rc screw JIS symbol Connection KEA0 KEA0 KEA KEA KEB0 KEB0 KEB KEB Rc1/ Rc/ KEC-0 KEC-0 Holder Holder to secure an in-line type speed controller with one-touch fitting. Series TMH In-line speed controllers and applicable holders Tubing tubing Body size size ø. ø ø ø ø ø AS01F TMH-J AS001F TMH-0J TMH-0J AS051F TMH-0 TMH-0 AS001F TMH- TMH- AS001F Multiple Fitting Holder Series TMA To secure series KE exhaust valves. To secure union tee KQT, union elbow KQL, straight union KQH. 19 TMA-0 TMA-0 TMA- TMA- Stations exhaust valve KEA0 KEB0 KEA0 KEB0 KEC-0 KEA- KEB- KEA- KEB- KEC-0 Union tee KQT0-00 KQT0-00 KQT0-00 KQT0-00 KQT-00 KQT-00 KQT-00 KQT-00 one-touch fittings Union elbow Straight union KQL0-00 KQL0-00 KQL0-00 KQL0-00 KQL-00 KQL-00 KQL-00 KQL-00 KQH0-00 KQH0-00 KQH0-00 KQH0-00 KQH-00 KQH-00 KQH-00 KQH-00

167 Speed Controller with One-touch Fitting Speed Controller Check Valve with One-touch Fitting Straight type: AKH Male connector type: AKH Thread size (a) Series AKH/AKB Drop Prevention Bushing type: AKB AS F ASD F AS FM ASD FM ASG AS FG ASD FG AKH0-00 AKH0-00 AKH0-00 AKH-00 AKH-00 Connection Quick Exhaust Valve with Built-in One-touch Fitting With silencer M5 X 0. AKH0A-M5 R1/ -01S M5 X 0. AKH0A-M5 R1/ -01S -0S R1/ AKH0A-01S -0S -0S AKHA-0S -0S -0S AKHA-0S -0S AKH0B-M5-01S AKH0B-M5-01S -0S AKH0B-01S -0S -0S AKHB-0S -0S -0S AKHB-0S -0S Space saving: Rectilinear IN-OUT tubing connections. JIS symbol Thread size (a) Rc1/ Rc1/ Rc/ Rc1/ (b) R1/ With exhaust port fitting Thread size (b) AKB01A-01S AKB0A-0S AKB0A-0S AKB0A-0S AKB01B-01S AKB0B-0S AKB0B-0S AKB0B-0S Series AQ0F Quick Exhaust AS FP AS F AS FE ASV F ASP F AS FT ASD FT AS FD ASD FD Related Equipment With silencer With exhaust port fitting AQ0F-0-00 AQ0F-0-00 AQ0F-0-00 AQ0F-0-0 AQ0F-0-0 AQ0F-0-0

168 Air Saving Valve Pressure Valve/Flow Valve Air consumption cut down by 5% It is not necessary to supply a high pressure to both sides of piston movement. The side with no work only requires a pressure sufficient to ensure smooth operation during the set time period (0. MPa). The system with PFC and QFC valves cuts down consumption by 5% and drastically reduces running and equipment costs. Pressure valve Working stroke Flow valve ASR ASR Pressure valve ASQ Flow valve 5 Body size 1/ standard / standard 1/ standard Type Universal How to Order 0 F 0 0 S With One-touch fittings With seal F0 Option Variable set pressure type (0.1 to 0. MPa) Fixed set pressure type F0 (0. MPa) 0 0 Return stroke Pressure valve Series ASR Regulator with check valve + Speed controller Port size A regulator with check valve and a flow control valve are integrated in one body. Pressure valve ASR0F-0 ASR50F-0 ASR50F-0 ASR0F-0 ASR0F-0 Flow valve ASQ0F-0 ASQ50F-0 ASQ50F-0 ASQ0F-0 ASQ0F-0 Port size () Specifications Flow valve Series ASQ Quick supply and exhaust valve + Speed controller (Meter-in, Meter-out) Proof pressure Max. operating pressure Set pressure Variable range Fixed (option) Ambient and fluid temperature Number of needle rotations tubing material 1.5 MPa 1.0 MPa 0.1 to 0. MPa 0. MPa 5 to 0 C (No freezing) rotations Nylon, Soft nylon, Polyurethane A pilot type switching valve and direction flow control valve are integrated in one body. 11

169 Speed Controller with One-touch Fitting Speed Controller Series ASR/ASQ AS F Pressure Valve: ASR ASD F AS FM Variable Set Pressure Type Connection ASR0F-0-0S ASR50F-0-0S -0-0S ASR0F-0-0S ASR50F-0-0S -0-0S ASR0F-0-S ASR50F-0-S -0-S ASR0F-0-S -0-S ASR50F-0-S -0-S ASR0F-0-S -0-S Fixed Set Pressure Type Connection ASR0F-0-0S-F0 ASR50F-0-0S-F0-0-0S-F0 ASR0F-0-0S-F0 ASR50F-0-0S-F0-0-0S-F0 ASR0F-0-S-F0 ASR50F-0-S-F0-0-S-F0 ASR0F-0-S-F0-0-S-F0 ASR50F-0-S-F0-0-S-F0 ASR0F-0-S-F0-0-S-F0 ASD FM ASG AS FG ASD FG AS FP AS F AS FE ASV F ASP F AS FT Flow Valve: ASQ ASD FT AS FD Variable Set Pressure Type Connection ASQ0F-0-0S ASQ50F-0-0S -0-0S ASQ0F-0-0S ASQ50F-0-0S -0-0S ASQ0F-0-S ASQ50F-0-S -0-S ASQ0F-0-S -0-S ASQ50F-0-S -0-S ASQ0F-0-S -0-S Fixed Set Pressure Type Connection ASQ0F-0-0S-F0 ASQ50F-0-0S-F0-0-0S-F0 ASQ0F-0-0S-F0 ASQ50F-0-0S-F0-0-0S-F0 ASQ0F-0-S-F0 ASQ50F-0-S-F0-0-S-F0 ASQ0F-0-S-F0-0-S-F0 ASQ50F-0-S-F0-0-S-F0 ASQ0F-0-S-F0-0-S-F0 ASD FD Related Equipment

170 Polyurethane Tubing Tubing size: Metric Size How to Order TU 0 5 BU 0 Note 1) Tubing O.D. Tubing I.D. Length per roll Symbol 0 0 Length 0 m roll 0 m roll Burst Pressure Characteristics and Operating Pressure Curve Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green C Transparent YR Orange BU1 Solid blue BU Clear blue BU Medium blue BR1 Brown G1 Solid green G Clear green G Neon green G Dark green GR1 Grey GR Light grey P1 Neon pink PU1 Solid purple PU Clear purple R1 Solid red R Clear red S1 Silver Y1 Solid yellow Y Clear yellow Y Neon yellow YR1 Clear orange YR Neon orange Refer to the front matter regarding the colour tone. Specifications Fluid Max. operating pressure (at 0 C) Burst pressure Min. bending radius Operating temperature Material TU0 TIUB01 TU05 TU00 TU005 TU5 TU0 TU1 Air, Water 0. MPa Refer to burst pressure characteristics curve to 0 C, Water: 0 to 0 C (No freezing) Polyurethane Note 1) tubing colour and length per roll vary according to tubing sizes. Refer to the table on the next page for details. Note ) Tubing size of TIUB01 is. (O.D.) and (I.D.). 5 1

171 Polyurethane Tubing Tubing O.D. I.D. White (W) Red (R) Blue (BU) TU0 1. TIUB01. TU05.5 TU00 Tubing size Metric size TU005 5 TU5.5 TU0 0 m roll 0 m roll TU1 1 TU TUS T TS Yellow (Y) Green (G) TUH Transparent (C) Orange (YR) TUZ Solid blue (BU1) Clear blue (BU) Medium blue (BU) Brown (BR1) Solid green (G1) Clear green (G) Neon green (G) Dark green (G) Gray (GR1) TCU TFU TPH TPS TL /TIL Light grey (GR) Neon pink (P1) TH Solid purple (PU1) Clear purple (PU) Solid red (R1) Clear red (R) Silver (S1) Solid yellow (Y1) Clear yellow (Y) TAU TAS TRS TRBU Neon yellow (Y) Clear orange (YR1) TRB Neon orange (YR) Related Equipment Made to Order Order Made Made to Order Reel X Clean Series - Length per roll O.D. I.D.. TIUB01 Colour symbol -0-X 0 m TU05 Colour symbol -0-X 0 m.5 TU05 Colour symbol -500-X 500 m 5 TU00 Colour symbol -0-X 0 m TU00 Colour symbol -00-X 00 m TU005 Colour symbol -0-X 0 m TU005 Colour symbol -00-X 00 m.5 TU5 Colour symbol -0-X 0 m TU0 Colour symbol -0-X 0 m Colour indication B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green), C (Transparent), YR (Orange). O.D. I.D TU0 Colour symbol -0 -TIUB01 Colour symbol -0 -TU05 Colour symbol -0 -TU00 Colour symbol -0 -TU005 Colour symbol -0 -TU5 Colour symbol -0 -TU0 Colour symbol -0 Colour indication B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green), C (Transparent), YR (Orange). YR (Orange) is not available for ø. 1

172 Soft Polyurethane Tubing Tubing size: Metric Size Supersoft How to Order TUS 5 B 0 Tubing O.D. Tubing I.D. Length per roll Symbol Length 0 0 m roll 0 0 m reel (Black and Blue only) Burst Pressure Characteristics and Operating Pressure Curve Colour indication Symbol Colour B W R BU Y G N YB Black White Red Blue Yellow Green Translucent Yellow brown TUS Related Accessories Inner Sleeve Series TJ Reinforces soft polyurethane tubing connected to one-touch fitting. Insert an inner sleeve into soft polyurethane tubing. Series O.D. I.D. White (W) Red (R) Blue (BU) Yellow (Y) TUS05.5 TUS00 Tubing Metric size TUS005 5 TUS5.5 0 m roll 0 m reel TUS0 Green (G) Translucent (N) Note 1) Yellow brown (YB) Specifications TJ-05 TJ-00 TJ-005 TJ-5 TJ-0 tubing model TUS05 TUS00 TUS005 TUS5 TUS0 Length Fluid Max. operating pressure (at 0 C) Burst pressure fitting Air 0. MPa Refer to burst pressure characteristics curve. One-touch fitting, insert fittings, hose nipple Min. bending radius Operating temperature Material to 0 C (No freezing) Polyurethane 9 Without Tubing drawing inner sleeve strength N With (with one-touch fitting) inner sleeve Note 1) Not transparent but translucent owing to the material. 15

173 Soft Polyurethane Tubing Tubing 0 m Roll 0 m on Reel TU O.D. I.D. O.D. I.D. Colour Colour TUS White (W) Red (R).5 Blue (BU) Yellow (Y) Green (G) TUS05 Colour symbol -0 Note 1) Translucent (N) Yellow brown (YB) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TUS00 Colour symbol -0 Note 1) Translucent (N) Yellow brown (YB) White (W) Red (R) 5 Blue (BU) Yellow (Y) Green (G) TUS005 Colour symbol -0 Note 1) Translucent (N) Yellow brown (YB) White (W) Red (R).5 Blue (BU) Yellow (Y) Green (G) TUS5 Colour symbol -0 Note 1) Translucent (N) Yellow brown (YB) White (W) Red (R) Blue (BU) Yellow (Y) TUS0 Colour symbol -0 Green (G) Note 1) Translucent (N) Yellow brown (YB) Note 1) Not transparent but translucent owing to the material Blue (BU) Blue (BU) Blue (BU) Blue (BU) Blue (BU) TUS05 Colour symbol -0 TUS00 Colour symbol -0 TUS005 Colour symbol -0 TUS5 Colour symbol -0 TUS0 Colour symbol -0 T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment 1

174 Nylon Tubing Tubing size: Metric Size T 0 5 B How to Order 0 Tubing O.D. Tubing I.D. Note 1) Tubing size of TIA01 is. (O.D.) and. (I.D.). Length per roll Symbol Length 0 0 m roll 0 0 m roll (Black and White only) Burst Pressure Characteristics and Operating Pressure Curve Series O.D. I.D. Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green TIA01.. T05.5 T00 T00 0 m roll 0 m roll (T11 is on reel.) Tubing Metric size T05.5 T00 T T09 9 T White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Specifications Fluid Max. operating pressure (at 0 C) Burst pressure Min. bending radius Operating temperature Material 15 1 Air, Water 1.5 MPa Refer to burst pressure characteristics curve to 0 C, Water: 0 to 0 C (No freezing) Nylon

175 Nylon Tubing Tubing 0 m Roll 0 m Roll TU O.D.. 1 I.D Colour (Colour symbol) White (W) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) TIA01 Colour symbol -0 T05 Colour symbol -0 T00 Colour symbol -0 T00 Colour symbol -0 T05 Colour symbol -0 T00 Colour symbol -0 T75 Colour symbol -0 T09 Colour symbol -0 T11 Colour symbol -0 O.D. I.D T11 is on reel. Colour (Colour symbol) White (W) White (W) White (W) White (W) White (W) White (W) T05 Colour symbol -0 T00 Colour symbol -0 T05 Colour symbol -0 T00 Colour symbol -0 T75 Colour symbol -0 T09 Colour symbol -0 T11 Colour symbol -0 TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment Made to Order Order Made Made to Order Reel X Length per roll O.D. I.D TIA01 Colour symbol -0-X 0 m T05 Colour symbol -0-X 0 m T05 Colour symbol -500-X 500 m T00 Colour symbol -0-X 0 m T00 Colour symbol -0-X 0 m T00 Colour symbol -500-X 500 m T00 Colour symbol -0-X 0 m T00 Colour symbol -00-X 00 m T75 Colour symbol -0-X 0 m T75 Colour symbol -150-X 150 m T09 Colour symbol -0-X 0 m Colour symbol -B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green) 1

176 Soft Nylon Tubing Tubing size: Metric Size Pliable How to Order TS 0 0 W 0 TubingO.D. Tubing I.D. Note 1) Tubing size of TISA01 is. (O.D.) and. (I.D.). Colour indication Symbol Colour B W R BU Y G Black White Red Blue Yellow Green Length per roll Symbol Length 0 0 m roll 0 0 m roll (Black and White only) Burst Pressure Characteristics and Operating Pressure Curve Series O.D. I.D. TISA01.. TS05.5 TS00 0 m roll 0 m roll (TS1 is on reel.) Tubing Metric size TS00 TS TS09 9 TS1 1 White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Specifications Fluid Max. operating pressure (at 0 C) Burst pressure Min. bending radius Operating temperature Material Air 1.0 MPa Refer to burst pressure characteristics curve to 0 C (No freezing) Nylon 11, Nylon 19

177 Soft Nylon Tubing Tubing 0 m Roll 0 m Roll TU O.D. I.D. Color (Color symbol) O.D. I.D. Color (Color symbol) TUS Made to Order Order Made White (W) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) TISA01 Colour symbol -0 TS05 Colour symbol -0 TS00 Colour symbol TS1 is on reel. TS00 Colour symbol -0 TS75 Colour symbol -0 TS09 Colour symbol -0 TS1 Colour symbol -0 Made to Order White (W) White (W) White (W) White (W) White (W) White (W) TS05 Colour symbol -0 TS00 Colour symbol -0 TS00 Colour symbol -0 TS75 Colour symbol -0 TS09 Colour symbol -0 TS1 Colour symbol -0 T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment Reel X O.D. I.D TISA01 Colour symbol -0-X TS05 Colour symbol -0-X TS05 Colour symbol -500-X TS00 Colour symbol -0-X TS00 Colour symbol -500-X TS00 Colour symbol -0-X TS00 Colour symbol -00-X TS75 Colour symbol -0-X TS75 Colour symbol -150-X TS09 Colour symbol -0-X Length per roll 0 m 0 m 500 m 0 m 500 m 0 m 00 m 0 m 150 m 0 m Colour symbol -B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green) 150

178 Hard Polyurethane Tubing Tubing size: Metric Size Standard type Effective sectional area increased by approx. % at the maximum. TUH / Standard type (Compared with polyurethane tubing TU005: O.D., length 1 m) High pressure type Operating pressure 1.0 MPa (at 0 C) TUH / High pressure type (Has the same operating pressure as series TS soft nylon tubing, and a bending strength equivalent to that of series TU polyurethane tubing.) Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa 5 1 Max. operating pressure Standard type Series Standard High pressure O.D. I.D. O.D. I.D. Opal (W) Blue (BU) Translucent (N) Specifications Fluid Max. operating Standard type pressure (at 0 C) High pressure type Min. bending Standard type radius High pressure type Burst pressure Operating temperature Material TUH 0 0 B 0 Tubing O.D. Tubing I.D. TUH0. TUH05.5 How to Order TUH0. TUH00 Colour indication Symbol Colour Black Opal Blue Translucent Tubing Metric size TUH05 5. TUH005 5 Note 1) Air Length per roll Symbol 0 0 TUH7 7. TUH5.5 Length 0 m roll 0 m roll 0 m roll 0 m roll TUH. TUH0 Note ) 0. MPa Note ) 1.0 MPa Refer to burst pressure characteristics curve. 0 to 0 C (No freezing) Polyurethane Note 1) Consult SMC regarding other fluids. Water cannot be used because of occurrence of hydrolysis. Note ) The maximum operating pressure is the value at 0 C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst. B W BU N Operating temperature C 7 High pressure type Burst pressure MPa 5 1 Max. operating pressure Operating temperature C

179 Hard Polyurethane Tubing Tubing 0 m Roll 0 m Roll Standard Type TU TUS O.D. I.D. Colour (Colour symbol) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) TUH0 Colour symbol -0 TUH0 Colour symbol -0 TUH05 Colour symbol -0 TUH7 Colour symbol -0 TUH Colour symbol -0 O.D. I.D Colour (Colour symbol) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) TUH0 Colour symbol -0 TUH0 Colour symbol -0 TUH05 Colour symbol -0 TUH7 Colour symbol -0 TUH Colour symbol -0 T TS TUH TUZ TCU TFU TPH TPS TL /TIL High Pressure Type TH O.D. I.D. Colour (Colour symbol) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) TUH05 Colour symbol -0 TUH00 Colour symbol -0 TUH005 Colour symbol -0 TUH5 Colour symbol -0 TUH0 Colour symbol -0 O.D. I.D Colour (Colour symbol) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) Opal (W) Blue (BU) Translucent (N) TUH05 Colour symbol -0 TUH00 Colour symbol -0 TUH005 Colour symbol -0 TUH5 Colour symbol -0 TUH0 Colour symbol -0 TAU TAS TRS TRBU TRB Related Equipment 15

180 Wear resistant Tubing Tubing size: Metric Size Abrasion: Approx. 1/ (Compared with SMC polyurethane tubing TU series) Description Wear resistant tubing TUZ series Polyurethane tubing TU series Note) Comparison based on the SMC's specific testing condition Maximum abrasion () After million cycles Tubing O.D. () Tubing I.D. () White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TUZ05 TUZ00 TUZ005 TUZ5 TUZ0 TUZ05.5 How to Order TUZ05 BU 0 Tubing model O.D. x I.D. () x.5 x x 5 x.5 x Symbol B W R BU Y G Colour Colour Black White Red Blue Yellow Green TUZ00 Wear Resistant TUZ005 5 Length per roll Symbol m roll 0 m roll TUZ5.5 Length 0 m roll 0 m roll TUZ0 Specifications Fluid fittings Max. operating 0 C pressure 0 C Burst pressure Min. bending radius () Operating temperature Material Air One-touch fittings KQ/KJ series, Insert fittings KF series, Stainless steel 1 insert fittings KFG series, Miniature fittings M/MS series (hose nipple type) 0. MPa 0. MPa Refer to the burst pressure characteristics curve to +0 C Special polyurethane Note 1) The minimum bending radius means the value measured by the method shown in the figure at the right at the temperature of 0 C when the tube is bent. The minimum bending radius assumes static piping. If the tube is used in a moving part, provide extra length to the tube. Check the bending radius recoended by the flexible protection tube manufacturer to assure that the tube is used in the flexible protection tube. Note ) Not clear, but opaque due to material. Burst Pressure Characteristics Curve and Operating Pressure.0 Pressure (MPa).0 Burst pressure Maximum operating pressure Temperature ( C) 15

181 Wear Resistant Tubing Tubing Reference Data: Abrasion due to Flexible Protection Tube TU Test Conditions Test tube Quantity of tube tested Operating speed Operating frequency Stroke L Bending radius R Material of flexible protection tube Tube tie TUZ00, TU00 5 pcs. for each 1500 /sec 90 c.p.m 500 Special engineering plastic Not used R L Flexible protection tube TUS T TS TUH Test Results Maximum abrasion after million cycles () TUZ TU00 0. As this test was an acceleration test, the tube bending radius was out of the flexible protection tube manufacturer's allowable range. When the flexible protection tube is used in the actual application, check the manufacturer s catalogue specifications. The values in the table above are representative values, and not guaranteed. Flexible protection tube Tube.5 TUZ TCU TFU TPH Tube dimensions inside the flexible protection tube TPS TL /TIL TH Made to Order Order Made Flat type of the TUZ series Made to Order The identification line is not shown. Colour combinations are also available. Please contact SMC for detailed specifications, dimensions, and delivery. How to Order TFU05 BU Colour Symbol Colour B Black W White R Red BU Blue Y Yellow G Green X7 Length per roll Number of cores TFU-X7 Special polyurethane TAU TAS TRS TRBU TRB Related Equipment Tubing model TFU05 TFU00 TFU005 TFU5 TFU0 O.D. x I.D. () x.5 x x 5 x.5 x 15

182 Polyurethane Coil Tubing Tubing size: Metric Size For compact piping. Burst Pressure Characteristics and Operating Pressure Curve Specifications TCU 05B-1 TCU 05B- TCU 05B- TCU 00B-1 TCU 00B- TCU 00B- TCU 005B-1 Number of rolls Tubing O.D. Tubing I.D..5 5 Fluid Air Note 1) Max. operating pressure (at 0 C) Note ) 0. MPa Burst pressure Refer to burst pressure characteristics curve. Operating temperature 0 to 0 C (No freezing) Material Polyurethane Colour Black Note 1) Consult SMC regarding other fluids. Note ) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Coil Tubing O.D. I.D..5 5 Colour Number of rolls Max. operating length m TCU05B-1 TCU05B- TCU05B- TCU00B-1 TCU00B- TCU00B- TCU005B-1 Made to Order Order Made Made to Order Change in the Number of Coil Windings and Colour X Clean Series Length O.D. I.D. Coil windingst per roll to 90 to 90 to to 90 to to to 90 to 0 to 5 to 5 to 5 to 0 TCU05 Colour symbol -1- Coil windings -X TCU05 Colour symbol -- Coil windings -X TCU05 Colour symbol -- Coil windings -X TCU00 Colour symbol -1- Coil windings -X TCU00 Colour symbol -- Coil windings -X TCU00 Colour symbol -- Coil windings -X TCU005 Colour symbol -1- Coil windings -X TCU005 Colour symbol -- Coil windings -X TCU5 Colour symbol -1- Coil windings -X TCU5 Colour symbol -- Coil windings -X TCU0 Colour symbol -1- Coil windings -X TCU0 Colour symbol -- Coil windings -X Colour symbol B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green), C (Transparent), YR (Orange) (Example) -TCU05B-1-155

183 Polyurethane Flat Tubing Tubing size: Metric Size Tubing For compact piping. Burst Pressure Characteristics and Operating Pressure Curve Made to Order Order Made Specifications TFU 0 5 B Tubing O.D. Tubing I.D. TFU 05B- TFU 05B- Colour indication Symbol Colour B Black TFU 00B- TFU 00B- Number of rolls Symbol Number of rolls Length per roll Tubing O.D. Tubing I.D..5 5 Fluid Air Note 1) Max. operating pressure (at 0 C) Note ) 0. MPa Burst pressure Refer to burst pressure characteristics curve. Operating temperature 0 to 0 C (No freezing) Material Polyurethane Colour Black Min. bending radius 15 0 Tubing length per roll (m) Note 1) Consult SMC regarding other fluids. Note ) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. m Roll O.D. I.D. Colour (Colour symbol) Number of rolls.5 5 Made to Order How to Order TFU 005B- TFU 005B- TFU05B- TFU05B- TFU00B- TFU00B- TFU005B- TFU005B- TU TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment Change in the Number of Rolls and Colour X Reel X m roll 50 m roll 0 m roll O.D. I.D. Number model O.D. I.D. Number O.D. I.D. Number to to to to to Clean Series TFU05 Colour symbol - Length per roll --X TFU00 Colour symbol - Length per roll --X TFU005 Colour symbol - Length per roll --X TFU5 Colour symbol - Length per roll --X TFU0 Colour symbol - Length per roll --X Colour symbol B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green), C (Transparent), YR (Orange) (Example) -TFU05B TFU05 Colour symbol --50-X TFU05 Colour symbol --50-X TFU00 Colour symbol --50-X TFU00 Colour symbol --50-X TFU005 Colour symbol --50-X TFU005 Colour symbol --50-X Colour symbol B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green), C (Transparent), YR (Orange).5 5 TFU05 Colour symbol --0-X TFU05 Colour symbol --0-X TFU00 Colour symbol --0-X TFU00 Colour symbol --0-X TFU005 Colour symbol --0-X Colour symbol B (Black), W (White), R (Red), BU (Blue), Y (Yellow), G (Green), C (Transparent), YR (Orange) 15

184 Clean Tubing: Polyolefin Tubing Tubing size: Metric Size How to Order TPH 0 0 B 0 Clean Tubing O.D. Tubing I.D. Length per roll Symbol 0 0 Length 0 m roll 0 m roll Caution Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease. Colour indication SymbolColour W B R BU Y G White Black Red Blue Yellow Green Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa 5 Burst pressure TPH00,TPH75,TPH09 Burst pressure TPH05,TPH00 Max. operating pressure (TPH05,TPH00) 1 Max. operating pressure (TPH00,TPH75,TPH09) Operating temperature C Series O.D. I.D. White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TPH05.5 TPH00 Tubing Metric size TPH00 TPH m roll 0 m roll TPH09 9 Specifications Fluid Max. operating pressure (at 0 C) Note ) Min. bending radius Burst pressure Operating temperature Air, Nitrogen gas, Water (Deionized water) Note 1) 1.0 MPa 0.7 MPa Refer to burst pressure characteristics curve. 0 to 0 C, Water: 5 to 0 C (No freezing) Material Polyolefine resin Note 1) Contact SMC regarding other fluids. Note ) The maximum operating pressure is the value at 0 C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst. Note ) The minimum bending radius is measured at 0 C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius. 157

185 Clean Tubing: Polyolefin Tube Tubing 0 m Roll 0 m Roll TU O.D. I.D. Colour (Colour symbol) O.D. I.D. Colour (Colour symbol) TUS White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TPH05 Colour symbol -0 TPH00 Colour symbol -0 TPH00 Colour symbol -0 TPH75 Colour symbol -0 TPH09 Colour symbol White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TPH05 Colour symbol -0 TPH00 Colour symbol -0 TPH00 Colour symbol -0 TPH75 Colour symbol -0 TPH09 Colour symbol -0 T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment 15

186 Clean Tubing: Soft Polyolefine Tubing Tubing size: Metric Size How to Order TPS 0 0 B 0 Clean Tubing O.D. Tubing I.D. Length per roll Symbol 0 0 Length 0 m roll 0 m roll Caution Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease. Colour indication Symbol Colour W B R BU Y G White Black Red Blue Yellow Green Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa 5 Burst pressure 1 Max. operating pressure Series O.D. I.D. White (W) Red (R) Blue (BU) TPS05.5 TPS00 Tubing Metric size TPS005 5 TPS5.5 0 m roll 0 m roll TPS Operating temperature C Yellow (Y) Green (G) Specifications Fluid Max. operating pressure (at 0 C) Note ) Min. bending radius Burst pressure Operating temperature Air, Nitrogen gas (Deionized water) Note 1) 0.7 MPa Refer to burst pressure characteristics curve. 0 to 0 C, Water: 5 to 0 C (No freezing) Material Polyolefine resin Note 1) Contact SMC regarding other fluids. Note ) The maximum operating pressure is the value at 0 C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst. Note ) The minimum bending radius is measured at temperature of 0 C and O.D. variable rate % or less. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius. 159

187 Clean Tubing: Soft Polyolefine Tubing Tubing 0 m Roll 0 m Roll TU O.D. I.D. Colour (Colour symbol) TUS O.D. I.D. Colour (Colour symbol) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TPS05 Colour symbol -0 TPS00 Colour symbol -0 TPS005 Colour symbol -0 TPS5 Colour symbol -0 TPS0 Colour symbol White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TPS05 Colour symbol -0 TPS00 Colour symbol -0 TPS005 Colour symbol -0 TPS5 Colour symbol -0 TPS0 Colour symbol -0 T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment

188 High Purity Fluoropolymer Tubing Tubing size: Metric Size / Inch Size Material: Super PFA Note 1) The maximum operating pressure is the value at 0 C. For other temperatures, calculate from the burst pressure drop coefficient. Furthermore, an abnormal temperature increase due to adiabatic compression can cause tubing to burst. To operate at a temperature other than 0 C, the operating pressure must be no more than the value calculated using the equation below: When the value (calculated using the formula below) exceeds 1 MPa, the Max. operating pressure is 1 MPa. (Max. operating pressure) = 1/ x (burst pressure drop coefficient) x (burst pressure at 0 C) When using a fluid in liquid form, the surge pressure must be no more than the maximum operating pressure. A surge pressure higher than the maximum operating pressure can cause breakage of the fitting or bursting of the tubing. Note ) The minimum bending radius is measured using the method shown in the figure at the below. Note ) It is connectable with LQ Series (/" size). As for other coercially available products, there are some cases it is not able to connect due to tolerance of dimensions. Fixed side R At a temperature of 0 C bend the tubing into a U shape. Then with one side fixed, gradually close the other side and measure R at the point where the tubing folds or flattens, etc. Burst pressure drop curve Burst pressure drop coefficient Corrosion Resistant Heat Resistant Clean Temperature C Series and Specifications Series TL (Metric sizes) Series TIL (Inch sizes) Tubing model TL00 TL00 TL00 TL0 TL TL191 TIL01 TILB01 TIL05 TIL07 TIL11 TIL1 TIL19 TIL5 Nominal diameter 1/" 1/" /1" 1/" /" 1/" /" 1" O.D. x I.D. () ø x ø ø x ø ø x ø ø x ø ø x ø ø19 x ø1 1/" 1/" /1" 1/" /" 1/" /" 1" x x x x x x x x 0.0" 1/1" 1/" 5/" 1/" /" 5/" 7/" O.D. Basic diameter () Tolerance ±0.1 ± Thickness Basic diameter () Tolerance ±0.05 ±0.1 ±0.15 ±0.05 ±0.0 ±0.0 ±0. ±0.15 m 0 m 50 m Bundle 0 m 50 Ft. (1 m) 0 Ft. ( m) Straight pipe m Colour Translucent (colour of material) fluid Refer to the applicable fluid in the separate catalog. Max. operating Note 1) pressure (at 0 C) Burst pressure (at 0 C) Min. bending Note ) radius () Max. operating temperature (Fixed use) Material How to Order Metric sizes Inch sizes 1.0 MPa 0.9 MPa 0.7 MPa 0. MPa 1.0 MPa 0.7 MPa 0.5 MPa.9 MPa.9 MPa.7 MPa. MPa.9 MPa. MPa. MPa 9.9 MPa.7 MPa 7.9 MPa.7 MPa. MPa. MPa.0 MPa 0 0 Tubing 5 1 Eluting fluorine ion amount (µg/g) Eluting metal ion amount (ng/cm ) Type Eluting amount Al.5 Fe 0. TL00 TIL01 Ni 0. Na 7.1 Note ) Type Fluorine ion Eluting amount 0.1 or less A 15 g piece of fluororesin tubing is cut off, washed in deionised water and iersed in 15 ml of 5% methyl alcohol extract at room temperature for hours. Then the extract is diluted with deionised water to be subjected to a quantitative analysis of fluorine ions. Note ) Ca 1. The interior of the fluororesin tubing is washed with super deionised water. Approximately 0g of super high purity hydrofluoric acid (%) is measured and injected into the tubing. The interior wall of the tubing is iersed at normal temperature for one week with both ends of the tubing plugged. Then the extract was diluted with super deionized water to be subjected to a quantitative analysis on Al, Fe, Ni, Na and Ca by the stripping method. 0 C Super PFA 0 0 Length Note ) Figures shown in the tables are representative values, not guaranteed values to both metric and inch size Symbol Type Length m 0 0 m Roll m 0 0 m S Straight m to inch size only Symbol Type Length 1 50 Ft. (1 m) Roll 0 Ft. ( m) Please refer to the Series and Specifications above, as the tubing length differs dependant on each size.

189 High Purity Fluoropolymer Tubing Tubing Metric Sizes Inch Sizes TU m Roll O.D. 19 I.D. 1 0 m Roll O.D. 19 I.D m Roll O.D. 19 I.D. 1 0 m Roll O.D. 19 I.D. 1 TL0- TL- TL191- TL00-0 TL00-0 TL00-0 TL0-0 TL-0 TL191-0 TL00-50 TL00-50 TL00-50 TL0-50 TL-50 TL TL00-0 TL00-0 TL00-0 TL0-0 TL-0 TL191-0 m Roll O.D. /" 1/" I.D. 1/" /" 0 m Roll O.D. 1/" /1" 1/" /" 1/" /" 1" I.D. 0.0" 1/" 5/" 1/" /" 5/" 7/" 50 m Roll O.D. 1/" /1" 1/" /" 1/" /" 1" I.D. 0.0" 1/" 5/" 1/" /" 5/" 7/" 0 m Roll O.D. 1/" /1" 1/" /" 1/" /" I.D. 0.0" 1/" 5/" 1/" /" 5/" TIL11- TIL1- TIL01-0 TIL05-0 TIL07-0 TIL11-0 TIL1-0 TIL19-0 TIL5-0 TIL01-50 TIL05-50 TIL07-50 TIL11-50 TIL1-50 TIL19-50 TIL5-50 TIL01-0 TIL05-0 TIL07-0 TIL11-0 TIL1-0 TIL Ft. (1 m) Roll O.D. I.D. 1/" 0.0" 1/" 1/1" /1" 1/" 1/" 5/" /" 1/" 1/" /" /" 5/" 1" 7/" O.D. I.D. 1/" 0.0" 1/" 1/1" /1" 1/" 1/" 5/" /" 1/" 1/" /" /" 5/" 1" 7/" TIL01-1 TILB01-1 TIL05-1 TIL07-1 TIL11-1 TIL1-1 TIL19-1 TIL5-1 0 Ft. ( m) Roll TIL01- TILB01- TIL05- TIL07- TIL11- TIL1- TIL19- TIL5- TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment Straight type m O.D. 19 I.D. 1 TL00-S TL00-S TL00-S TL0-S TL-S TL191-S Straight type m O.D. 1/" /1" 1/" /" 1/" /" 1" I.D. 0.0" 1/" 5/" 1/" /" 5/" 7/" TIL01-S TIL05-S TIL07-S TIL11-S TIL1-S TIL19-S TIL5-S

190 FEP Tubing (Fluoropolymer) Tubing size: Metric Size How to Order Heat Resistant Metric size TH00 N 0 Indication of tubing model Colour indication Symbol Colour N Translucent R Red (Translucent) BU Blue (Translucent) B Black (Opaque) Length per roll Symbol Roll size 0 0 m roll 0Note) 0 m roll Note) 0 m roll is available with translucent (colour indication: N) only. Max. Operating Pressure Max. Operating Pressure MPa TH00 TH05 TH00 TH0/TH TH00/TH75/TH Operating Temperature C Note) The maximum operating pressure varies dependant on the I.D. bore size even if the O.D. is the same. 1 Series Tubing O.D. () Tubing I.D. () Translucent (N) Red (Translucent) (R) Blue (Translucent) (BU) Black (Opaque) (B) Specifications Fluid fittings 0 m roll 0 m roll Metric size TH00 TH05 TH00 TH00 TH75 TH0 TH09 TH Inch nominal size 5/" Inch nominal size 5/1" 0 C Max. operating pressure (MPa) 0 C 00 C Refer to below Max. Operating Pressure. Min. bending radius () Operating temperature Air, Inert gas: 0 to 00 C Water: 0 to 0 C (No freezing) Material Note ) Air, Water Note 1), Inert gas One-touch fittings: Series KQ, KJ Insert fittings: Series KF Fluoropolymer fittings: Series LQ Miniature fittings: Series M, MS (Hose nipple type) FEP (Fluorinated Ethylene Propylene Resin) Note 1) When using a fluid in liquid form, the surge pressure must not exceed the maximum operating pressure. A surge pressure higher than the maximum operating pressure can cause breakage of the fittings, or rupture of the tubing. Furthermore, an abnormal temperature increase due to adiabatic compression can also result in ruptured tubing. Note ) Do not use in locations where the FEP tubing will move. Be sure to operate under the maximum operating pressure conditions using the lower maximum operating specification of either the tubing or fittings. After long term use or under high temperatures, some fittings leakage may occur due to material deterioration with age. Perform periodic inspections, and if any leakage is detected, replace with a new product iediately. (Refer to maintenance part of CAT.ES50-, FEP Tubing (Fluoropolymer).) Refer to Best Pneumatics catlogue Vol. 15 for all other precautions. For High Purity Fluoropolymer, refer to the precautions of CAT.ES70-17, High Purity Fluoropolymer Fittings & Tubing.

191 FEP Tubing (Fluoropolymer) Tubing 0 m Roll 0 m Reel TU O.D. I.D. Colour (Colour symbol) O.D. I.D. Colour (Colour symbol).5 TH00 Colour symbol -0 Translucent (N) 7.5 TH05 Colour symbol Translucent (N) Red (R) Blue (BU) Translucent (N) Red (R) Blue (BU) Translucent (N) Red (R) Blue (BU) Translucent (N) Red (R) Blue (BU) Translucent (N) Red (R) Blue (BU) Translucent (N) Red (R) Blue (BU) Translucent (N) Red (R) Blue (BU) Translucent (N) Red (R) Blue (BU) Colour symbol Red or Blue: Translucent Colour symbol Black: Opaque TH00 Colour symbol -0 TH00 Colour symbol -0 TH75 Colour symbol -0 TH0 Colour symbol -0 TH09 Colour symbol -0 TH Colour symbol -0 TH00N-0 TH05N-0 TH00N-0 TH00N-0 TH75N-0 TH0N-0 TH09N-0 THN-0 TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment 1

192 Antistatic Polyurethane Tubing Tubing size: Metric Size For pneumatic piping system requiring antistatic measures. Flexible tubing TAU 5 B 0 Tubing O.D. Tubing I.D. How to Order Length per roll Symbol Length 0 0 Antistatic Measures 0 m roll 0 m on reel Colour indication Symbol Colour B Black Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa Max. operating pressure Operating temperature C Series O.D. I.D. Specifications Max. operating Note 1) pressure (at 0 C) Burst pressure Min. bending radius Note ) Operating temperature Material Surface resistance TAU0. TAU05.5 Tubing Metric size TAU00 TAU MPa 0 m roll 0 m on reel TAU5.5 TAU0 Refer to burst pressure characteristics curve to 0 C Conductive polyurethane to 7 Ω Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note ) The value at a temperature of 0 C. 0 m Roll 0 m on Reel O.D. I.D. Colour (Colour symbol) O.D. I.D. Colour (Colour symbol) TAU0B-0 TAU05B-0 TAU00B-0 TAU005B-0 TAU5B-0 TAU0B TAU0B-0 TAU05B-0 TAU00B-0 TAU005B-0 TAU5B-0 TAU0B-0 15

193 Antistatic Soft Nylon Tubing Tubing size : Metric Size Tubing For pneumatic piping system requiring antistatic measures. Flame resistant tubing (Equivalent to UL-9 Standards V-0) Burst Pressure Characteristics and Operating Pressure Curve Series TAS 5 B 0 Tubing O.D. O.D. I.D. Specifications Max. operating Note 1) pressure (at 0 C) Burst pressure Min. bending radius Note ) Tubing I.D. How to Order TAS.. Colour indication Symbol Colour B Black TAS05.5 Length per roll Symbol Length 0 0 m roll 0 0 m on reel Tubing Metric size TAS00 Antistatic Measures 1. MPa TAS m roll 0 m on reel TAS5.5 TAS0 Refer to burst pressure characteristics curve Operating temperature 0 to 0 C Material Conductive nylon + Flame resistant nylon (Equivalent to UL-9 Standards V-0) Surface resistance to 7 Ω Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note ) The value at a temperature of 0 C, with a % or less O.D. variable rate. TU TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB 0 m Roll 0 m on Reel Related Equipment O.D. I.D. Colour (Colour symbol) O.D. I.D. Colour (Colour symbol) TASB-0 TAS05B-0 TAS00B-0 TAS005B-0 TAS5B-0 TAS0B TASB-0 TAS05B-0 TAS00B-0 TAS005B-0 TAS5B-0 TAS0B-0 1

194 Flame Resistant (Equivalent to UL-9 Standards V-0) /FR Soft Nylon Tubing Tubing size: Metric Size to general pneumatic and water piping in a spark atmosphere such as in spot welding. Flame resistant tubing TRS 5 B 0 Tubing O.D. Tubing I.D. How to Order Length per roll Symbol Length 0 0 Spatter Proof 0 m roll 0 m on reel Colour indication Symbol Colour B W R BU G Black White Red Blue Green Burst Pressure Characteristics and Operating Pressure Curve Series O.D. I.D. TRS00 TRS005 5 Tubing Metric size TRS5.5 0 m roll 0 m on reel TRS0 White (W) Red (R) Blue (BU) Green (G) Specifications Fluid Max. operating pressure (at 0 C) Burst pressure Min. bending radius Operating temperature Material Air, Water 1. MPa Refer to burst pressure characteristics curve to 0 C, Water: 0 to 0 C (No freezing) Flame resistant nylon (Equivalent to UL-9 Standards V-0) 17

195 Flame Resistant (Equivalent to UL-9 Standards V-0) / FR Soft Nylon Tubing Tubing 0 m Roll 0 m on Reel TU O.D. I.D. Colour (Colour symbol) TUS O.D. I.D. Colour (Colour symbol) 5.5 White (W) Blue (BU) White (W) Red (R) Blue (BU) Green (G) White (W) Red (R) Blue (BU) Green (G) White (W) Red (R) Blue (BU) Green (G) TRS00 Colour symbol -0 TRS005 Colour symbol -0 TRS5 Colour symbol -0 TRS0 Colour symbol White (W) Blue (BU) White (W) Red (R) Blue (BU) Green (G) White (W) Red (R) Blue (BU) Green (G) White (W) Red (R) Blue (BU) Green (G) TRS00 Colour symbol -0 TRS005 Colour symbol -0 TRS5 Colour symbol -0 TRS0 Colour symbol -0 T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment 1

196 Flame Resistant (Equivalent to UL-9 Standards V-0) /FR Double Layer Polyurethane Tubing Tubing size: Metric Size to general pneumatic and water piping in a spark atmosphere such as in spot welding. Double layer design using flame resistant resin (equivalent to UL-9 Standard V-0) for outer layer. Inner tubing material: Polyurethane Inner tubing Polyurethane TRBU 5 B 0 Inner Inner tubing I.D. How to Order Length per roll Symbol Length 0 0 Colour indication Symbol Colour B W R BU Y G Black White Red Blue Yellow Green Spatter Proof 0 m roll 0 m on reel Outer layer FR double layer polyurethane tubing (Sectional view) Burst Pressure Characteristics and Operating Pressure Curve Series Inner Inner tubing I.D. Outer layer thickness TRBU00 1 TRBU Tubing Metric size TRBU m roll 0 m on reel TRBU0 1 Burst pressure MPa Burst pressure Note 1) Outer layer colour White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Max. operating pressure 0 0 Operating temperature C Related Accessories Tubing Cutter Series TKS Tool to peel off outer layer tubing. Specifications Fluid Max. operating pressure (at 0 C) Note ) Burst pressure Air, Water Note ) 0. MPa Refer to burst pressure characteristics curve. Min. bending radius Note ) Operating temperature 0 to 0 C, Water: 0 to 0 C (No freezing) Material Inner tubing Polyurethane Outer layer Polyolefin resin (Equivalent to V-0 in UL-9 Standards) Note 1) The inner tubing are all black. Note ) to general industrial water. Consult SMC for use of other types of fluids. Keep the surge pressure below the maximum operating temperature. Note ) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note ) The value at a temperature of 0 C. Refer to page17 for more information. 19

197 Flame Resistant (Equivalent to UL-9 Standards V-0) / FR Double Layer Polyurethane Tubing Tubing 0 m Roll 0 m on Reel TU Inner tubing O.D. Inner tubing I.D. 5.5 Colour (Colour symbol) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TRBU00 Colour symbol -0 TRBU005 Colour symbol -0 TRBU5 Colour symbol -0 TRBU0 Colour symbol -0 Inner tubing O.D. Inner tubing I.D. 5.5 Colour (Colour symbol) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TRBU00 Colour symbol -0 TRBU005 Colour symbol -0 TRBU5 Colour symbol -0 TRBU0 Colour symbol -0 TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment 170

198 Flame Resistant (Equivalent to UL-9 Standards V-0) /FR Double Layer Tubing Tubing size: Metric Size to general pneumatic and water piping in a spark atmosphere such as in spot welding. Double layer design using flame resistant resin (Equivalent to UL-9 Standards V-0) for outer layer. Inner tubing Soft nylon TRB 75 B 0 Inner Inner tubing I.D. How to Order Length per roll Symbol Length 0 0 Colour indication Symbol Colour B W R BU Y G Black White Red Blue Yellow Green Spatter Proof 0 m roll 0 m on reel Outer layer FR double layer tubing (Sectional view) Burst Pressure Characteristics and Operating Pressure Curve Series Inner Inner tubing I.D. Outer layer thickness TRB00 1 TRB00 1 Tubing Metric size TRB m roll 0 m on reel TRB Note 1) Outer layer colour White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Related Accessories Tubing Stopper Series TKS Tubing outer layer peeling tool. Specifications Fluid Max. operating pressure (at 0 C) Note ) Air, Water Note ) 1.0 MPa Burst pressure Refer to burst pressure characteristics curve. Min. bending radius Note ) Operating temperature 0 to 0 C, Water: 0 to 0 C (No freezing) Inner tubing Nylon 11 Material Outer layer PVC (Equivalent to UL-9 Standards V-0) Note 1) The inner tubing are all black. Note ) to general industrial water. Consult SMC if using other fluids. Surge pressure must be under the maximum operating temperature. Note ) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note ) The value at a temperature of 0 C, with a % or less O.D. variable rate. Refer to page 17 for more information. 171

199 Flame Resistant (Equivalent to UL-9 Standards V-0) / FR Double Layer Tubing Tubing 0 m Roll 0 m on Reel TU Inner tubing O.D. Inner tubing I.D Colour (Colour symbol) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TRB00 Colour symbol -0 TRB00 Colour symbol -0 TRB75 Colour symbol -0 TRB09 Colour symbol -0 Inner tubing O.D. Inner tubing I.D Colour (Colour symbol) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) TRB00 Colour symbol -0 TRB00 Colour symbol -0 TRB75 Colour symbol -0 TRB09 Colour symbol -0 TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment 17

200 Tubing Related Equipment Tube Stand & Tube Reel Compact size without taking up space. Easy installment just by putting tube reel. Series TB/TBR Allows easy refilling and replacing tubes. Tube reel Tube stand Employs snap fit method with one-touch, easy handling Locked Unlock condition With rollers convenient for moving With slant prevention structure adjustable with numbers of reels set Tube Reel tubing size, TBR-1 TBR- TBR- TBR- Tube Stand: TB- Tube Cutter TK-1 : 1 or less TK- : 1 or less TK- (Useful type) : or less Series TK 17 Note) Do not use the cutter to cut the metalic materials such as electric wires.

201 Tubing Tubing Multi-tube Holder Possible to separate options depending on number of connection tubes. Use of flame resistant resin (Equivalent to UL-9 Standards V-0). TM-0 TM-0 TM-0 TM- TM- Tube Releasing Tool Number of tubing (Max.) Accessory: Phillips countersunk tapping screw Size: nominal size X length Number of pieces X. X X Caution How to Use Series TM 1. Cut the multi-tube holder depending on number of tubes to be connected. <Cutting method> Cut the groove for separation with side cutters.. Install the multi-tube holder to the equipment with crossrecessed head, countersunk tapping screw.. Lay the tube across the gripper and push on the tube.. For removing the tubes, pull up the tubes from the gripper. Series TG For attaching and dettaching tubes for One-touch fittings mounted in a narrow space or on manifolds. TU TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU tubing size tubing material Handle colour Weight TG-1 ø, ø Nylon, Soft nylon, Polyurethane Blue g TRB Related Equipment Double Layer Tube Stripper Series TKS Allows easy stripping of the outer layer from double layer tubes. Variations TKS-0 TKS-0 TKS- TKS- Tip colour Orange Yellow Blue Green tubing TRB00, TRBU00 TRB00, TRBU005 TRB75, TRBU5 TRB09, TRBU0 Inner tubing material/trb: soft nylon, TRBU: polyurethane 17

202 Blow Gun Series VMG Energy for air-blowing can be saved. Effective sectional area 0 Pressure loss is less than 1% (Nozzle size: ø.5) VMG 1 1 W 0 01 Top piping Screw-in type Bottom piping With S coupler plug Blow gun Standard type Series 1 Resin body lever type Piping entry 1 Bottom Top W BU Body colour Urban white Dark blue Nozzle Nil Type Male nozzle High efficiency nozzle Low noise nozzle with male Copper extension nozzle Note 1) Length 00 Length 00 Nozzle model Without nozzle KN-R0-0 KN-R0-150 KN-R0-00 KN-R0-50 KNH-R0-0 KNH-R0-150 KNH-R0-00 KNS-R KNS-R KNS-R0-0- KNS-R0-1- KNL KNL-0-00 KNL KNL-0-00 Nozzle size ø1 ø1.5 ø ø.5 ø1 ø1.5 ø ø0.75 X ø0.9 X ø1 X ø1.1 X ø1.5 ø ø1.5 ø Note 1) One piece of H0-0 self-align fitting is attached. When a copper extension nozzle is ordered separately, a self-align fitting will also be reguired for connection. Order one with the above part number in addition to the nozzle. Piping connection type Nil N F Rc NPT G Connection size Piping connection system 0 Screw-in type 0 11 With S coupler plug Note 1) Size and part no. 1/ Port size / Plug part no. KKP-0MS Note 1) In case of a type with an S coupler plug, specify no symbol (Rc) for the piping connection type. The size is Rc 1/. 175

203 Tubing Tubing Nozzle for Blow Nozzle with self-align fitting: KN KN-0-0 KN KN-0-0 KN KN-0-00 KN KN-0-00 KN--50 KN--00 KN--50 KN--00 KN--00 KN--50 KN--00 KN--00 KN-1-00 KN-1-00 KN-0-00 KN-0-00 Male nozzle: KN KN-R01-0 KN-R KN-R0-0 KN-R0-150 KN-R0-00 KN-R0-50 KN-R0-00 KN-R0-00 KN-R0-00 KN-R0-00 KN-R0-00 KN-R0-00 KN-R0-00 KN-R-00 Nozzle size D ø1 ø1.5 ø1 ø1.5 ø ø1.5 ø ø.5 ø ø.5 ø ø ø.5 ø ø ø ø ø ø Nozzle size D ø1 ø1.5 ø1 ø1.5 ø ø.5 ø ø ø ø ø ø ø ø Copper extension nozzle: KNL KNL KNL-0-00 KNL-0-00 KNL-0-50 KNL--50 KNL--00 KNL KNL-0-00 KNL-0-00 KNL-0-50 KNL--50 KNL--00 Nozzle size D ø1.5 ø ø ø.5 ø.5 ø ø1.5 ø ø ø.5 ø.5 ø O.D. ø ø ø ø ø ø ø ø ø ø ø ø Connection size ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø1 ø1 ø0 ø0 Connection size R1/ R1/ R/ R/ R1 L Series KN Nozzle for One-touch fitting (KQ, KQ): KN Note) Cannot be connected to the M5 or M type connection of KJ/KQ series. KN-Q0-0 KN-Q0-150 KN-Q0-00 KN-Q0-150 KN-Q0-00 KN-Q-00 KN-Q-50 KN-Q-50 KN-Q-00 Nozzle size D ø1 ø1.5 ø ø1.5 ø ø ø.5 ø.5 ø Connection size ø ø ø ø ø ø ø ø ø Pivoting nozzle with self-align fitting: KNK KNK--00 KNK--00 KNK--00 KNK--00 KNK-1-00 KNK-1-00 KNK-0-00 KNK-0-00 Nozzle size D ø ø ø ø ø ø ø ø Male pivoting nozzle : KNK KNK-R0-00 KNK-R0-00 KNK-R0-00 KNK-R0-00 KNK-R0-00 KNK-R0-00 High efficiency nozzle: KNH KNH-R0-0 KNH-R0-150 KNH-R0-00 Nozzle size D ø ø ø ø ø ø Nozzle size D ø1 ø1.5 ø size ø ø ø ø ø1 ø1 ø0 ø0 size size Low noise nozzle with self-align fittings: KNS KNS KNS-0-0- KNS KNS KNS--0- Nozzle size D ø0.75 X ø1 X ø0.75 X ø0.9 X ø1 X size ø ø ø ø ø Low noise nozzle with male : KNS KNS-R KNS-R01-0- KNS-R KNS-R KNS-R KNS-R0-0- KNS-R0-1- Nozzle size D ø0.75 X ø1 X ø0.9 X ø0.75 X ø0.9 X ø1 X ø1.1 X Connection Connection Connection Connection Connection size R1/ R1/ R1/ TU TUS T TS TUH TUZ TCU TFU TPH TPS TL /TIL TH TAU TAS TRS TRBU TRB Related Equipment 17