One-Touch Mini Fittings

Transcription

1 Series KJ One-Touch Mini Fittings One-Touch Mini Fittings Series KJ Features Outside diameter reduced by 20%(Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring copper-free material. (Electroless nickel plating) Compatible with vacuum to 0 kpa of pressure. : Metric Size : M,, Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Thread Thread label (Standard) For application requiring copper-free material (Standard) Tubing Mounting Nut Air, Water Note1) 1.0MPa 0kPa.0MPa 5 to 0 C, In case of water: 0 to 0 C (with no condensation) JIS B020 (Taper for piping) JIS B0209, Class 2 (Metric coarse ) JIS B0211, Class 2 (Metric fine ) With sealant Brass parts are all electroless nickel plated. Note1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Tubing material Tubing O.D. Nylon, Soft nylon, Polyurethane ø2, ø, ø, ø ø2 One-touch Mini Series KJ Guide 1 Guide 2 Chuck to nylon and polyurethane. Large retaining force. Secure engagement and large retaining force with chuck. Release bush (Light grey) Requires little force for removal. Releases the chuck to remove the tubing. Prevents the chuck from biting too deeply into the tubing. Tubing removal is easier. PAT. Packing Compatible with low vacuum to 1.0 MPa of pressure. The special shape ensures sealing and reduces resistance of tubing insertion. Gasket Tubing Body (White) O-ring Stud Enables piping in a narrower space. Body and can be rotated (For positioning). Electroless nickel plated. with sealant. 1

2 One-Touch Mini Fittings Series KJ Tubing Female hole KJH Male Connector Most coon style used to pipe from female in the same direction. <> <M, > <> M 2 2 M M M M KJH02-M - KJH2-M - KJH0-M - KJH0- The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. <M, > 2 M M M KJS02-M KJS2-M - KJS0-M - KJS0- Most coon style used to pipe from female at a right angle. <M, > <> KJS Hex Socket head Male Connector KJL Male Elbow M KJL02-M - KJL2-M - KJL0-M - KJL0- KJW Extended Male Elbow Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <M, > <> <M, > <> 2 2 M M To branch the line from the female at 90 in each direction. M KJT02-M <> M M - KJT2-M - KJT0-M - KJT0- To branch the line from the female in the same direction and at 90. <M, > M M To branch a tubing in the same direction. <> <> KJT Male Branch Tee KJY Male Run Tee 2 KJU Branch Y M M KJW02-M - KJW2-M - KJW0-M - KJW0- KJY02-M - KJY2-M - KJY0-M - KJY0- KJU2- KJU0- KJU0- FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 11

3 Series KJ One-Touch Mini Fittings Tubing Tubing KJH Straight Union To connect tubing in the same direction. KJH Different Diameter Straight To connect tubing of different diameters. 2 KJH02-00 KJH2-00 KJH0-00 KJH0-00 a b a b 2 KJH KJH KJH0-0 KJE Bulkhead Union To connect tubing through a panel. KJT Dfferent Diameter Tee To branch the tubing into two at a right angle and reduce the resulting branches in size. 2 KJL Union Elbow To connect tubing at right angles to each other. KJE02-00 KJE2-00 KJE0-00 KJE0-00 KJL2-00 KJL0-00 KJL a b a KJU Different Diameter Union Y b KJT2-0 KJT0-0 To branch tubing into 2 smaller tubing in the same direction as the original one. 2- a b a 2 2 b KJU02-2 KJU02-0 KJU2-0 KJU0-0 KJT Union Tee To branch tubing into 2 directions each at 90 to the original one. KJU Union Y To branch tubing in the same direction. 2 KJT02-00 KJT2-00 KJT0-00 KJT KJU02-00 KJU2-00 KJU0-00 KJU

4 One-Touch Mini Fittings Series KJ Tubing One-touch fittings KJL Plug-In Elbow To change the tubing direction from a one-touch fitting by 90. Aplicable fitting size KJL2-99 KJL0-99 KJL0-99 KJU Plug-In Y To branch the line from a one-touch fitting into tubing in the same direction. fitting size KJU2-99 KJU0-99 KJU0-99 KJR Plug-In Reducer To connect to a smaller one-touch fitting. KJX Reducer Union Plug-In Y To branch the line from a one-touch fitting into smaller diameter in the same direction. fitting size 2 KJL Reducer Elbow KJR02-0 KJR KJR0-0 To change the tubing direction from a one-touch fitting by 90 as well as to connect to a tubing of a smaller diameter. fitting size KJL KJL0-0 KJP Plug fitting size To plug unused one-touch fittings. fitting size KJX2-0 KJX0-0 2 KJP Tubing Male KJF Female Connector To pipe from the male ed portion of a pressure gauge, etc. M M KJF2-M - KJF0-M - KJF0- FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 115

5 Series KQ2 One-Touch Fittings One-Touch Fittings Series KQ2 KQ2/White body Features Wide range of pressures - Low vacuum ( Torr) to Bar (1.0MPa) pressure Wide range of tube systems ( - 1 OD tube) Minimised resistance to air flow Widest range of configuration available Choice of body colour to suit customer application Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Thread Sealant (Thread portion) Mounting Nut Note 1) Air, Water 1.0MPa 0kPa.0MPa 5 to 0 C, In case of water: 0 to 0 C (With no condensation) JIS B020 (Taper for piping) JIS B0209, Class 2 (Metric coarse ) JIS B0211, Class 2 (Metric fine ) With / Without sealant Note 1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Tubing Tubing material Tubing outside O.D. Colour Series Series KQ2 Series KQ Body White Black Nylon, Soft Nylon, Polyurethane ø, ø, ø, ø, ø, ø, ø1 Release button Light grey Blue tubing diameter: Metric Size : M, R, Rc Also available Uni-fitting series Universal application to G, Rc and NPT areas Imperial sizes A full range of SMC fittings is available to suit imperial size tubing from 1/ to 1/2, with either European standard Metric and R s or American standard UNF and NPT s. Contact SMC for details of these types. Series KQ2: White body Series KQ : Black body Guide Collet Chuck to nylon and polyurethane Large retaining force Secure engagement with chuck and large retaining force with collet. Release button Series KQ2: Light grey Series KQ : Blue Requires little force for removal Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. Packing Compatible with a wide range of pressure, from low vacuum to 1.0 MPa. The special shape ensures sealing and reduces resistance in tubing insertion. Thread M, R, Rc Tubing Body O-ring Stud Effective for piping in confined space The body and portion can be rotated. (For positioning) PAT. 11

6 One-Touch Fittings Series KQ2 Tubing Female hole KQ2H/KQH Male Connector Most coon style used to pipe from female in the same direction. <, M> <R> 1 M M Release Button, Release Button KQ2H( Light grey ) KQH( Blue ) KQ2H2- KQH2- S S KQ2H0- KQH0- -M -M S S KQ2H0- KQH0- -M -M S S KQ2H0 KQH0 S S KQ2H KQH S S -0S -0S KQ2HS KQHS -0S -0S KQ2H1 KQH1-0S -0S KQ2K/KQK 5 Male Elbow For piping at 5 from female. Intermediate model between male connector and male elbow. <, M> <R> 1 M M KQ2K (White) KQK (Black) KQ2K0- KQK0- -M -M S S KQ2K0- KQK0- -M -M S S KQ2K0 KQK0 S S KQ2K KQK S S -0S -0S KQ2KS KQKS -0S -0S KQ2K1 KQK1-0S -0S KQ2L/KQL Male Elbow Most coon style used to pipe from female at a right angle. KQ2L (White) KQL (Black) KQ2L2- KQL2- S S KQ2L0- KQL0- M -M -M <> S S KQ2L0- KQL0- M -M -M S S <M> KQ2L0 KQL0 S S KQ2L KQL S S -0S -0S <R> KQ2LS KQLS -0S -0S 1 KQ2L1 KQL1-0S -0S KQ2W/KQW Ext. Male Elbow Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <> <R> 1 KQ2W (White) KQW (Black) KQ2W2- KQW2- S S KQ2W0- KQW0- S S KQ2W0- KQW0- S S KQ2W0 KQW0 S S KQ2WS KQWS -0S -0S KQ2WS KQWS -0S -0S KQ2W1 KQW1-0S -0S FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1

7 Series KQ2 One-Touch Fittings Tubing Female hole KQ2S/KQS Hexagon Socket Head Male Connector The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. <, M> <R> 1 M M Release Button, Release Button KQ2S( Light grey )KQS( Blue ) KQ2S0- KQS0- -M KQ2S0- -M S KQ2S0 S KQ2S S -0S KQ2SS -0S KQ2S1-0S -M KQS0- -M S KQS0 S KQS S -0S KQSS -0S KQS1-0S KQ2VS/KQVS <> <R> Hex. Socket Head Universal Male Elbow The hexagon socket in the head is used to tighten the body with a hexagon wrench. Useful in a confined space. KQ2VS (White) KQ2VS0- KQ2VS0- S KQ2VS0 S KQ2VSS KQ2VS -0S KQ2V/KQV Universal Male Elbow The hexagon head of the body is used to tighten the body with a box wrench in a confined space. <> <R> 1 KQ2V (White) KQV (Black) KQ2V0- KQV0- KQ2V0- KQV0- S S KQ2V0 KQV0 S S KQ2VS KQVS KQ2V KQV -0S -0S KQ2V1 KQV1-0S -0S KQ2T/KQT Male Branch Tee To branch the line from the female at 90 in each direction. <M> <R> 1 M M KQ2T (White) KQT (Black) KQ2T2- KQT2- S S KQ2T0- KQT0- -M -M S S KQ2T0- KQT0- -M -M S S KQ2T0 KQT0 S S KQ2T KQT S S -0S -0S KQ2TS KQTS -0S -0S KQ2T1 KQT1-0S -0S 11

8 One-Touch Fittings Series KQ2 Tubing Female hole KQ2Y/KQY Male Run Tee To branch the line from the female in the same direction and at 90. <, M> <R> 1 M M KQ2Y (White) KQ2Y2- S KQ2Y0- -M S KQ2Y0- -M S KQ2Y0 S KQ2Y S -0S KQ2YS -0S KQ2Y1-0S KQY (Black) KQY2- S KQY0- -M S KQY0- -M S KQY0 S KQY S -0S KQYS -0S KQY1-0S KQ2U/KQU Union Y To branch tubing in the same direction. <, M> <R> 1 M M KQ2U (White) KQU (Black) KQ2U2- KQU2- S S KQ2U0- KQU0- -M -M S S KQ2U0- KQU0- -M -M S S KQ2U0 KQU0 S S KQ2US KQUS -0S -0S KQ2US KQUS -0S -0S KQ2U1 KQU1-0S -0S KQ2VD/KQVD Double Uni. Male Elbow To branch the line from the female at right angles. 2 individual parts rotate freely. KQ2VD (White) KQVD (Black) KQ2VD0 KQVD0 S S KQ2VD0 KQVD0 S S KQ2VD0 KQVD0 S S -0S -0S KQ2VDS KQVDS -0S -0S KQ2VDS KQVDS -0S -0S KQ2VT/KQVT Triple Universal Male Elbow To branch line from the female into directions at right angles. individual parts rotate freely. KQ2VT (White) KQVT (Black) KQ2VT0 KQVT0 S S KQ2VT0 KQVT0 S S KQ2VT0 KQVT0 S S -0S -0S KQ2VTS KQVTS -0S -0S KQ2VTS KQVTS -0S -0S KQ2Z/KQZ Branch Universal Male Elbow The hexagon head of the body is used to tighten the body with a box wrench. Used to branch the line. Elbow union for piping. <> <R> KQ2Z (White) KQZ (Black) KQ2Z0- KQZ0- KQ2Z0 KQZ0 S S KQ2Z0 KQZ0 S S KQ2ZS KQZS KQ2Z KQZ -0S -0S KQ2UD/KQUD Delta Branch Y To branch the line from the female into tubes in the same direction. KQ2UD (White) KQUD (Black) KQ2UD0 KQUD0 S S KQ2UD0 KQUD0 S S FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 119

9 Series KQ2 One-Touch Fittings Tubing Female hole KQ2LU/KQLU To branch tubing at a right angle from the female. <, M> <R> M M Branch Union Elbow KQ2LU (White) KQLU (Black) KQ2LU0- KQLU0- -M -M S S KQ2LU0- KQLU0- -M -M S S KQ2LU0 KQLU0 S S KQ2LUS KQLUS -0S -0S KQ2LUS KQLUS -0S -0S KQ2ZD/KQZD To branch the line from the female into tubes at right angles. 2 individual parts rotate freely. Double Branch Universal Male Elbow KQ2ZD (White) KQZD (Black) KQ2ZD0 S KQ2ZD0 S KQ2ZD0 S -0S KQ2ZDS -0S KQ2ZDS -0S KQZD0 S KQZD0 S KQZD0 S -0S KQZDS -0S KQZDS -0S KQ2ZT/KQZT To branch the line from the female into tubes at right angles. individual parts rotate freely. Triple Branch Universal Male Elbow KQ2ZT (White) KQZT (Black) KQ2ZT0 KQZT0 S S KQ2ZT0 KQZT0 S S KQ2ZT0 KQZT0 S S -0S -0S KQ2ZTS KQZTS -0S -0S KQ2ZTS KQZTS -0S -0S KQ2D/KQD Male Delta Union To branch the line from the female into 2 directions at right angles. <, M> <R> M M KQ2D (White) KQ2D0- -M S KQ2D0- -M S KQ2D0 S KQ2DS -0S KQ2DS -0S KQD (Black) KQD0- -M S KQD0- -M S KQD0 S KQDS -0S KQDS -0S 0

10 One-Touch Fittings Series KQ2 Tubing Tubing KQ2H/KQH Straight Union To connect tubings in the same direction. 1 KQ2H (White) KQH (Black) KQ2H2-00 KQ2H0-00 KQ2H0-00 KQ2H0-00 KQ2H-00 KQ2H-00 KQ2H1-00 KQH2-00 KQH0-00 KQH0-00 KQH0-00 KQH-00 KQH-00 KQH1-00 KQ2LE/KQLE Bulkhead Male Elbow To connect tubings through a panel and change the tubing entry by 90. KQ2LE (White) KQLE (Black) KQ2LE0-00 KQLE0-00 KQ2LE0-00 KQLE0-00 KQ2LE0-00 KQLE0-00 KQ2LE-00 KQLE-00 KQ2LE-00 KQLE-00 KQ2E/KQE To connect tubing through a panel. Bulkhead Union KQ2T/KQT Union Tee To branch tubing into 2 directions each at 90 to the original one. Release button, KQ2E( ) KQE( Release button Light grey Blue ) 1 KQ2E2-00 KQ2E0-00 KQ2E0-00 KQ2E0-00 KQ2E-00 KQ2E-00 KQ2E1-00 KQE2-00 KQE0-00 KQE0-00 KQE0-00 KQE-00 KQE-00 KQE1-00 KQ2L/KQL Union Elbow To connect tubing at right angles to each other. 1 KQ2L (White) KQL (Black) KQ2L2-00 KQL2-00 KQ2L0-00 KQL0-00 KQ2L0-00 KQL0-00 KQ2L0-00 KQL0-00 KQ2L-00 KQL-00 KQ2L-00 KQL-00 KQ2L1-00 KQL KQ2T2-00 KQ2T0-00 KQ2T0-00 KQ2T0-00 KQ2T-00 KQ2T-00 KQ2T1-00 KQ2U/KQU Union Y To branch tubing in the same direction. 1 KQ2T (White) KQT (Black) KQT2-00 KQT0-00 KQT0-00 KQT0-00 KQT-00 KQT-00 KQT1-00 KQ2U (White) KQU (Black) KQ2U2-00 KQU2-00 KQ2U0-00 KQU0-00 KQ2U0-00 KQU0-00 KQ2U0-00 KQU0-00 KQ2U-00 KQU-00 KQ2U-00 KQU-00 KQ2U1-00 KQU1-00 KQ2H/KQH To connect tubings of different diameters. a b a Different Dia. Straight b 1 KQ2H (White) KQH (Black) KQ2H2-0 KQH2-0 KQ2H0-0 KQH0-0 KQ2H0-0 KQH0-0 KQ2H0- KQH0- KQ2H- KQH- KQ2H-1 KQH-1 KQ2T/KQT Diff. Dia. Tee To branch the tubing into two at a right angle and reduce the resulting branches in size. b 2- a a b 1 KQ2T (White) KQ2T2-0 KQ2T0-0 KQ2T0-0 KQ2T0- KQ2T- KQ2T-1 KQT (Black) KQT2-0 KQT0-0 KQT0-0 KQT0- KQT- KQT-1 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1

11 Series KQ2 One-Touch Fittings Tubing Tubing KQ2LU/KQLU To branch a tube at a right angle into two tubes. Branch Union Elbow KQ2LU (White) KQLU (Black) KQ2LU0-00 KQLU0-00 KQ2LU0-00 KQLU0-00 KQ2LU0-00 KQLU0-00 KQ2LU-00 KQLU-00 KQ2LU-00 KQLU-00 KQ2T/KQT To connect tubing in the same direction as well as to branch it into another smaller tubing at 90. b 2- a a Different Diameter Tee b KQ2T (White) KQ2T0-0 KQ2T0-0 KQ2T-0 KQ2T- KQT (Black) is manufactured as a made to order. KQ2D/KQD Delta Union To connect tubes at right angles with each other. KQ2TW Cross To branch tubing into directions. KQ2D (White) KQD (Black) KQ2D0-00 KQD0-00 KQ2D0-00 KQD0-00 KQ2D0-00 KQD0-00 KQ2D-00 KQD-00 KQ2D-00 KQD-00 KQ2TW (White) KQ2TW0-00 KQ2TW0-00 KQ2TW0-00 KQ2TW-00 KQ2TW-00 This model is not available with black body specifications. KQ2U/KQU To branch tubing into 2 smaller tubes in the same direction as the original one. a a b a KQ2UD/KQUD b 1 KQ2U (White) KQU (Black) KQ2U2-0 KQU2-0 KQ2U0-0 KQU0-0 KQ2U0-0 KQU0-0 KQ2U0- KQU0- KQ2U- KQU- KQ2U-1 KQU-1 Different Dia. Double Union "Y" To branch tubing into smaller tubes in the same direction as the original one. - a b a Diff. Dia. Union Y b KQ2UD (White) KQUD (Black) KQ2UD0-0 KQUD0-0 KQ2UD0-0 KQUD0-0 To connect tubes at right angles with 2 smaller tubes on both sides. b KQ2TX Different Diameter Cross a a b a b KQ2TX (White) KQ2TX0-0 KQ2TX0- KQ2TX- This model is not available with black body specifications. KQ2TY Different Diameter Cross To branch tubing into smaller tubing in directions. b a b KQ2TY (White) This model is KQ2TY0-0 not available with black body KQ2TY0- specifications. - a KQ2TY- 2

12 One-Touch Fittings Series KQ2 Tubing One-touch fittings KQ2L/KQL Plug-in Elbow To change the tubing direction from a one-touch fitting by Fitting size KQ2L (White) KQL (Black) 1 KQ2L2-99 KQ2L0-99 KQ2L0-99 KQ2L0-99 KQ2L-99 KQ2L-99 KQ2L1-99 KQL2-99 KQL0-99 KQL0-99 KQL0-99 KQL-99 KQL-99 KQL1-99 KQ2U/KQU Plug-in Y To branch the line from a one-touch fitting into tubing in the same direction. Fitting size KQ2U (White) KQU (Black) 1 1 KQ2U2-99 KQ2U0-99 KQ2U0-99 KQ2U0-99 KQ2U-99 KQ2U-99 KQ2U1-99 KQU2-99 KQU0-99 KQU0-99 KQU0-99 KQU-99 KQU-99 KQU1-99 KQ2W/KQW Ext. Plug-in Elbow To change the tubing direction from a one-touch fitting by 90. to dimensional piping when used with a plug-in elbow. KQ2L/KQL Reducer Elbow To change the tubing direction from a one-touch fitting by 90 as well as to connect to tubing of a smaller diameter. Fitting size KQ2W (White) KQW (Black) KQ2W2-99 KQ2W0-99 KQ2W0-99 KQ2W0-99 KQ2W-99 KQ2W-99 KQW2-99 KQW0-99 KQW0-99 KQW0-99 KQW-99 KQW-99 KQ2R/KQR Plug-in Reducer To connect to a smaller one-touch fitting. Fitting size 1 1 KQ2R (White) KQR (Black) KQ2R2-0 KQR2-0 KQ2R0-0 KQR KQ2R0-0 KQR KQ2R0- KQR KQ2R- KQR KQ2R-1 KQR-1 Fitting size KQ2L (White) KQL (Black) 1 KQ2L2-0 KQ2L KQ2L0-0 - KQ2L0- - KQ2L- KQ2L-1 KQL2-0 KQL KQL0-0 - KQL0- - KQL- KQL-1 KQ2X/KQX Diff. Dia. Plug-in Y To branch the line from a one-touch fitting into tubing of a smaller diameter in the same direction. Fitting size KQ2X (White) KQX (Black) KQ2X0-0 KQX0-0 KQ2X0-0 KQX0-0 KQ2X0- KQX0- KQ2X- KQX- KQ2XD/KQXD Double Branch Y To branch the line from a one-touch fitting into tubes of a smaller diameter in the same direction. Fitting size KQ2XD (White) KQXD (Black) KQ2XD0-0 KQXD0-0 KQ2XD0-0 KQXD0-0 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION

13 Series KQ2 One-Touch Fittings Tubing Male Thread KQ2F/KQF Female Connector To pipe from the male ed portion of a pressure gauge, etc. KQ2LF/KQLF Female Elbow To pipe from the male ed at the right angle. 1 Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ Rc1/2 Rc/ Rc1/2 Release button, Release button KQ2F( Light grey ) KQF( Blue ) KQ2F0-01 KQF0-01 KQ2F0-01 KQF0-01 KQ2F0-01 KQF0-01 KQ2F KQF KQ2F KQF -0-0 KQ2F1 KQF <, M> <Rc> M Rc1/ Rc1/ M Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/2 Rc1/ Rc/ Rc1/2 KQ2LF (White) KQLF (Black) KQ2LF0- KQLF0- -M -M KQ2LF0- KQLF0- -M -M KQ2LF0-01 KQLF0-01 KQ2LF KQLF -0-0 KQ2LF KQLF -0-0 KQ2E/KQE Bulkhead Female Conn. Used for trunk connection between tubing and a male installed through a panel. 1 Rc1/ Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc/ Rc1/2 Rc/ Rc1/2 KQ2E( Release button, Release button Light grey )KQE( Blue ) KQ2E2 KQE2 KQ2E0-01 KQE0-01 KQ2E0-01 KQE0-01 KQ2E0-01 KQE0-01 KQ2E KQE KQ2E KQE -0-0 KQ2E1 KQE KQ2VF/KQVF Uni. Female Elbow To connect a line from a male and female in the same direction as well as to branch it into 2 pipes at a right angle. Multiplex connections possible. <> <R, Rc> KQ2VF (White) KQVF (Black) R/Rc1/ KQ2VF0- KQVF0- KQ2VF0- KQVF0- R/Rc1/ R/Rc1/ S S R/Rc1/ KQ2VF0 KQVF0 R/Rc1/ S S R/Rc/ R/Rc1/ KQ2VFS KQVFS R/Rc/ R/Rc/ KQ2VF KQVF R/Rc1/2-0S -0S KQ2ZF/KQZF Branch Uni. Female Elbow To branch a line from a male or female in the same direction and at a right angle. Multiplex connections possible. <> <R, Rc> R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc1/ R/Rc/ R/Rc/ R/Rc1/2 KQ2ZF (White) KQZF (Black) KQ2ZF0- KQZF0- KQ2ZF0 KQZF0 S S KQ2ZF0 KQZF0 S S KQ2ZFS KQZFS KQ2ZF KQZF -0S -0S

14 One-Touch Fittings Series KQ2 Accessories KQ2P/KQP Plug To plug unused one-touch fittings KQ2P (White), KQP (Blue). KQ2C/KQC Tubing Cap To plug unused tubing. fitting size 1 KQ2P (White) KQ2P-2 KQ2P-0 KQ2P-0 KQ2P-0 KQ2P- KQ2P- KQ2P-1 KQP (Black) KQP-2 KQP-0 KQP-0 KQP-0 KQP- KQP- KQP-1 1 KQ2C (White) KQ2C0-00 KQ2C0-00 KQ2C0-00 KQ2C-00 KQ2C-00 KQ2C1-00 KQC (Black) KQC0-00 KQC0-00 KQC0-00 KQC-00 KQC-00 KQC1-00 KQ2N/KQN Nipple To connect 2 one-touch fittings. KQ2N/KQN Diff. Dia. Nipple To connect one-touch fittings of different sizes. fitting size KQ2N (White) KQN (Black) 1 KQ2N0-99 KQ2N0-99 KQ2N0-99 KQ2N-99 KQ2N-99 KQ2N1-99 KQN0-99 KQN0-99 KQN0-99 KQN-99 KQN-99 KQN1-99 KQ2N/KQN Adapter To connect a one-touch fitting and R female. fitting size KQ2N (White) KQN (Black) KQ2N0- KQN0- KQ2N0- KQN0- S S KQ2N0S KQN0S KQ2N KQN a b fitting size a b KQ2N (White) KQN (Black) 1 KQ2N0-0 KQ2N0-0 KQ2N0- KQ2N- KQ2N-1 KQN0-0 KQN0-0 KQN0- KQN- KQN-1 KQ2C Colour Cap Attached to release buttons for various applications to distinguish them by colour. 1 KQ2C-01m KQ2C-01A-m KQ2C-01B-m KQ2C-0m KQ2C-0A-m KQ2C-0B-m KQ2C-0m KQ2C-0A-m KQ2C-0B-m KQ2C-0m KQ2C-m KQ2C-m KQ2C-1m Application KQH, KQ2H2- KQL, KQ2L2- KQT, KQ2T2- KQY, KQ2Y2- KQH, KQ2H0-, M KQS, KQ2S0-, M KQL, KQ2L0-, M KQT, KQ2T0-, M KQY, KQ2Y0-, M KQH, KQ2H0-, M KQS, KQ2S0-, M KQL, KQ2L0-, M KQT, KQ2T0-, M KQY, KQ2Y0-, M (m) in the above table is the colour of the cap. See list bellow: B (Black), R (Red), YR (Orange), BR (Brown), Y (Yellow), G (Green), CB (Sky blue), GR (Gray), W (White), BU (Blue) FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 5

15 Series KQ2 One-touch fittings with G Type Connection Threads One-touch Fittings (Whith G Type Connection Threads) Series KQ2 Features The seal gasket on the male for piping eliminates the need for pipe tape. Gasket Male G Thread. Female G tubing: Dimensions With cylindrical ing/tapping: G1/, G1/, G/, G1/2 One-touch connection and release. Possible to use in vacuum to -0kPa. The male for piping drastically cuts piping manhours. Suitable foe use with port thrads conforming to ISO19 and ISO0. Tubing Tubing material Tubing O.D. Note 1) The soft nylon tube is not available with water. Product s Color FEP,PFA, Nylon, Soft nylon (Note1), Polyurethane ø, ø, ø, ø, ø, ø1 Series Body Release button Series KQ2 White Light grey Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Mounting Thread Nut Air, Water Note 2) 1.0 MPa Note ) 0 kpa.0 MPa 5 to 0C, In case of water: 0 to 0C (No freezing) JIS B0207 (EN ISO22) JIS B0211, Class 2 (Metric fine ) Note 2) The surge pressure must be under the maximum operating pressure. Note ) The amount of leakage is not zero, and so the use for holding vacuum such as a leak tester should be avoided. Principal Parts Material Body Stud Chuck Guide Collet, Release button Seal, O-ring Gasket C0BD, PBT C0BD (Thread portion) Stainless steel 0 Stainless steel 0, C0BD, PBT POM NBR Stainless steel 0, NBR

16 One-touch fittings with G Type Connection Threads Series KQ2 Male Connector: Male Elbow: Male Branch Tee: Male Run Tee: KQ2H KQ2L KQ2T KQ2Y () 1 Connection G 1 KQ2H0-G01 1 KQ2H0-G02 1 KQ2H0-G01 1 KQ2H0-G02 KQ2H0-G0 1 KQ2H0-G01 1 KQ2H0-G02 KQ2H0-G0 1 KQ2H-G01 1 KQ2H-G02 KQ2H-G0 1 2 KQ2H-G0 1 KQ2H-G02 KQ2H-G0 1 2 KQ2H-G0 KQ2H1-G0 1 2 KQ2H1-G0 () 1 Connection G 1 KQ2L0-G01 1 KQ2L0-G02 1 KQ2L0-G01 1 KQ2L0-G02 KQ2L0-G0 1 KQ2L0-G01 1 KQ2L0-G02 KQ2L0-G0 1 KQ2L-G01 1 KQ2L-G02 KQ2L-G0 1 2 KQ2L-G0 1 KQ2L-G02 KQ2L-G0 1 2 KQ2L-G0 KQ2L1-G0 1 2 KQ2L1-G0 () 1 Connection G 1 KQ2T0-G01 1 KQ2T0-G02 1 KQ2T0-G01 1 KQ2T0-G02 KQ2T0-G0 1 KQ2T0-G01 1 KQ2T0-G02 KQ2T0-G0 1 KQ2T-G01 1 KQ2T-G02 KQ2T-G0 1 2 KQ2T-G0 1 KQ2T-G02 KQ2T-G0 1 2 KQ2T-G0 KQ2T1-G0 1 2 KQ2T1-G0 () 1 Connection G 1 KQ2Y0-G01 1 KQ2Y0-G02 1 KQ2Y0-G01 1 KQ2Y0-G02 KQ2Y0-G0 1 KQ2Y0-G01 1 KQ2Y0-G02 KQ2Y0-G0 1 KQ2Y-G01 1 KQ2Y-G02 KQ2Y-G0 1 2 KQ2Y-G0 1 KQ2Y-G02 KQ2Y-G0 1 2 KQ2Y-G0 KQ2Y1-G0 1 2 KQ2Y1-G0 Female Connector: KQ2F () 1 Connection G 1 KQ2F0-G01 1 KQ2F0-G02 1 KQ2F0-G01 1 KQ2F0-G02 KQ2F0-G0 1 KQ2F0-G01 1 KQ2F0-G02 KQ2F0-G0 1 KQ2F-G02 KQ2F-G0 1 KQ2F-G02 KQ2F-G0 1 2 KQ2F-G0 KQ2F1-G0 1 2 KQ2F1-G0 Universal Male Elbow: KQ2V () FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1 Extended Male Elbow: KQ2W () 1 Connection G Connection G 1 KQ2W0-G01 1 KQ2W0-G02 1 KQ2W0-G01 1 KQ2W0-G02 KQ2W0-G0 1 KQ2W0-G01 1 KQ2W0-G02 KQ2W0-G0 1 KQ2W-G02 KQ2W-G0 1 2 KQ2W-G0 1 KQ2W-G02 KQ2W-G0 1 2 KQ2W-G0 KQ2W1-G0 1 2 KQ2W1-G0 1 KQ2V0-G01 1 KQ2V0-G01 1 KQ2V0-G02 1 KQ2V0-G01 1 KQ2V0-G02 KQ2V0-G0 1 KQ2V-G02 KQ2V-G0 KQ2V-G0 1 2 KQ2V-G0 KQ2V1-G0 1 2 KQ2V1-G0 Hexagon Socket Head Male Connector: KQ2S () Connection G 1 KQ2S0-G01 1 KQ2S0-G01 1 KQ2S0-G02 1 KQ2S0-G01 1 KQ2S0-G02 KQ2S0-G0 1 KQ2S-G01 1 KQ2S-G02 KQ2S-G0 1 2 KQ2S-G0 1 KQ2S-G02 KQ2S-G0 1 2 KQ2S-G0 KQ2S1-G0 1 2 KQ2S1-G0 Bulkhead Connector: KQ2E () 1 Connection G 1 KQ2E0-G01 1 KQ2E0-G02 1 KQ2E0-G01 1 KQ2E0-G02 KQ2E0-G0 1 KQ2E0-G01 1 KQ2E0-G02 KQ2E0-G0 1 KQ2E-G02 KQ2E-G0 KQ2E-G0 1 2 KQ2E-G0 KQ2E1-G0 1 2 KQ2E1-G0 7 Racoords et tubes/ Auxiliaires de ligne

17 Series KS/KX Rotary One-Touch Fittings Rotary One-Touch Fittings Series KS/KX Features Rotary one-touch fittings for low-torque rotation. to oscillating and rotating sections of robots etc. Male Elbow For application requiring copper-free material (Electroless nickel plated) sealant is standardized. Specifications Male Connector : Metric Size : M,R Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Thread Air 1.0MPa 0kPa.0MPa 5 to 0 C (With no condensation) JIS B020 (Taper for piping) JIS B0209, Class 2 (Metric coarse ) Tubing Tubing material Tubing O.D. Note1) Nylon, soft nylon, Polyurethane ø, ø, ø, ø, ø Note1) Take precautions regarding the maximum operating pressure with soft nylon and polyurethane. Rotating Torque / Allowable Number of Rotations ø ø ø ø ø Rotating torque N m Note1) Allowable number of rotations S -1 Series KS Series KX Note1) Rotating torque at a 0.5 MPa pressure. PAT. Series KX (Construction) Slide bearing Low-torque, low-friction operation with oil containing slide bearing. Rotary seal The special rotary seal minimizes rotating torque and friction. Holder Electroless nickel plating allows copper-free applications. Ball bearing The ball bearing ensures low-torque rotation. Stud Electroless nickel plating allows copper-free applications. Thread sealant is standardized. Series KS (Standard) Cassette Series KS: Blue Series KX: Light grey The male connector is provided with a tubing rotation prevention mechanism. Series KX (High speed type) construction Scraper Prevents chips from entering the bearing parts. Rotary seal X ring shape minimizes friction while providing Ball bearing an excellent seal. Seal The ball bearing ensures is fire and shock proof low-torque rotation. fluorine rubber. It proves SUS0C improves corrosion against high friction heat resistance. in high speed rotation and longer life. * Other specifications are same as those of series KS.

18 Rotary One-Touch Fittings Series KS/KX Standard Series KS KSH Male Connector Most coon style used to pipe from female in the same direction. KSL Male Elbow Most coon style used to pipe from female at a right angle. <, M> <R> M M KSH0- -M KSH0- -M S KSH0 S KSHS -0S KSH -0S <, M> <R> M M KSL0- -M KSL0- -M S KSL0 S KSLS -0S KSL -0S High Speed Type Series KX KXH Male Connector Most coon style used to pipe from female in the same direction. <, M> <R> M M KXH0- -M KXH0- -M S KXH0 S KXHS -0S KXH -0S KXL Male Elbow Most coon style used to pipe from female at a right angle. <, M> <R> M M KXL0- -M KXL0- -M S KXL0 S KXLS -0S KXL -0S FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 9

19 Series KM One-Touch Fitting Manifold One-Touch Fitting Manifold Series KM Features Compact and lightweight. Centralized piping possible. Rich variation of 0 styles. One-touch installation. Threaded or one-touch fitting inlet or plug-in stem., or way manifold. : Metric Size : R, Rc Specifications Fluid Max. operating pressure Proof pressure Ambient and fluid temperature Thread Accessory Tubing KM11 Air, Water Note1) 1.0MPa.0MPa 5 to 0 C, In case of water: 0 to 0 C (With no condensation) No KM JIS B020 (Taper for piping) Hexagon socket head plug: 1 pc KM1 Note1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. KM11 Tubing material Tubing O.D. Port A One-touch fitting Porting Port B One-touch fitting, KM One-touch fitting Rc female, KM1 One-touch fitting One-touch fitting KM1 KM15 One-touch fitting One-touch fitting One-touch fitting R male One-touch fitting rod Number of port A KM1 One-touch fitting One-touch fitting No KM1 JIS B020 (Taper for piping) No KM15 KM1 No Nylon, Soft nylon, Polyurethane ø, ø, ø, ø, ø Port B Port size ø ø ø Rc1/ Rc/ ø ø ø ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ø ø ø ø No Port A port size ø ø ø 10

20 One-Touch Fitting Manifold Series KM One Touch Fittings Manifold KM11 KM1 B A KM KM1 A A B A B A Rc1/ Rc1/ Rc/ A B Number of port A Number of port A Number of port A KM KM KM KM-0- - KM-0- - KM-0- - KM KM KM1-0-- B KM15 A B KM1 A tubing O.D. A B tubing O.D. A B fitting size Number of port A Number of port A KM S- - KM S- - KM S- - KM1-0-S- - -0S- KM1-0-S- - -0S- KM KM KM B A A B Number of port A KM KM KM FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 11

21 Series KF Insert Fittings Insert Fittings, Resin sleeve and Brass Sleeve types Series KF Features Material / Body, Union nut: Brass Material / Sleeve: Resin or Brass Fluid temperature / 5 to 15 C 5 to 0 C Specifications (Brass sleeve) (Resin sleeve) Can be used with steam. (For brass sleeve) Grease-free tubing material / FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin Sleeve material Fluid Ambient and fluid temperature Maximum operating pressure Operating vacuum pressure Note) Proof pressure Lubricant Seal (Thread portion) Note) Please avoid using in a vacuum holding application such as a leak tester, as leakage may occur. Tubing Series T TS TU TP TPS TH TL Tubing O.D. Nylon Soft nylon Polyurethane Polyolefin Soft polyolefin FEP Super PFA Resin Air 5 to 0 C (No freezing) 1.0 MPa 1. kpa 7.0 MPa (at 0C) Grease-free None or with sealant Brass Air, Steam 5 to 150 C (No freezing) Tubing O.D. x I.D. () ø x ø2.5 ø x ø ø x ø5 ø x ø ø x ø.5 ø x ø7.5 ø x ø ø x ø9 Tube can be connected without fully removing the nut. Prevents the tube from disconnecting during piping. Union nut Light tightening torque The insert mechanism provides a reliable retaining force on the tube. Sleeve Body 12

22 Insert Fittings Series KF Insert Fittings KFH Male Connector Used to pipe tube in the same direction as a female. Most general type KFT Male Branch Tee Used to pipe a branch line at right angles in both directions from a female. tubing size () O.D. ø ø ø ø ø O.D. I.D. ø2.5 ø ø5 ø ø.5 ø7.5 ø ø9 KFL Male Elbow I.D. Connection Resin sleeve KFH0 KFH0S KFH0 KFH0S KFH0 KFH0U KFH0US KFH0U KFH0N KFH0NS KFH0N KFHUS KFHU KFHU-0S KFHNS KFHN KFHN-0S KFHUS KFHU KFHU-0S KFHNS KFHN KFHN-0S Resin sleeve KFL0 KFL0S KFL0 KFL0S KFL0 KFL0U KFL0US KFL0U KFL0N KFL0NS KFL0N KFLUS KFLU KFLU-0S KFLNS KFLN KFLN-0S KFLUS KFLU KFLU-0S KFLNS KFLN KFLN-0S Brass sleeve KFH0B KFH0BS KFH0B KFH0BS KFH0B KFH0B KFH0BS KFH0B KFHBS KFHB KFHB-0S KFHBS KFHB KFHB-0S Used to pipe tube at right angles to a female. Most general type tubing size () ø ø ø ø ø ø2.5 ø ø5 ø ø.5 ø7.5 ø ø9 Connection Brass sleeve KFL0B KFL0BS KFL0B KFL0BS KFL0B KFL0B KFL0BS KFL0B KFLBS KFLB KFLB-0S KFLBS KFLB KFLB-0S tubing size () O.D. ø ø ø ø ø O.D. I.D. ø2.5 ø ø5 ø ø.5 ø7.5 ø ø9 KFY Male Run Tee ø ø ø ø ø I.D. ø2.5 ø ø5 ø ø.5 ø7.5 ø ø9 Connection Resin sleeve KFT0 KFT0S KFT0 KFT0S KFT0 KFT0U KFT0US KFT0U KFT0N KFT0NS KFT0N KFTUS KFTU KFTU-0S KFTNS KFTN KFTN-0S KFTUS KFTU KFTU-0S KFTNS KFTN KFTN-0S Resin sleeve KFY0 KFY0S KFY0 KFY0S KFY0 KFY0U KFY0US KFY0U KFY0N KFY0NS KFY0N KFYUS KFYU KFYU-0S KFYNS KFYN KFYN-0S KFYUS KFYU KFYU-0S KFYNS KFYN KFYN-0S Brass sleeve KFT0B KFT0BS KFT0B KFT0BS KFT0B KFT0B KFT0BS KFT0B KFTBS KFTB KFTB-0S KFTBS KFTB KFTB-0S Used to pipe a branch line at right angles and in the same direction from a female. tubing size () Connection Brass sleeve KFY0B KFY0BS KFY0B KFY0BS KFY0B KFY0B KFY0BS KFY0B KFYBS KFYB KFYB-0S KFYBS KFYB KFYB-0S FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1

23 Series KF Insert Fittings Insert Fittings KFF Female Connector Used to pipe tube from a male such as pressure gauge. KFE Bulkhead Connector Used to pipe tube to a male. tubing size () O.D. I.D. ø ø2.5 ø ø ø ø ø ø5 ø ø.5 ø7.5 ø ø9 Connection Resin sleeve KFF0 KFF0 KFF0 KFF0U KFF0N KFFU KFFN KFFU KFFN Brass sleeve KFF0B KFF0B KFF0B KFF0B KFFB KFFB tubing size () O.D. I.D. ø ø ø ø5 ø ø ø.5 ø7.5 ø ø ø9 Connection Resin sleeve Brass sleeve KFE0 KFE0B KFE0U KFE0N KFE0B KFEU KFEN KFEB KFEU KFEN KFEB Swivel Elbow Used to pipe tube at right angles to a female. Can be swiveled in any direction. Straight Union Used to pipe tubes in the same direction. tubing size () Connection O.D. I.D. ø ø2.5 ø ø ø5 ø ø ø.5 ø ø7.5 ø ø ø9 Resin sleeve KFV0 KFV0S KFV0 KFV0S KFV0 KFV0U KFV0US KFV0U KFV0N KFV0NS KFV0N KFVUS KFVU KFVU-0S KFVNS KFVN KFVN-0S KFVUS KFVU KFVU-0S KFVNS KFVN KFVN-0S Brass sleeve KFV0B KFV0BS KFV0B KFV0BS KFV0B KFV0B KFV0BS KFV0B KFVBS KFVB KFVB-0S KFVBS KFVB KFVB-0S tubing size () O.D. I.D. ø ø2.5 ø ø ø ø5 ø ø ø.5 ø7.5 ø ø ø9 Resin sleeve KFH0-00 KFH0-00 KFH0U-00 KFH0N-00 KFHU-00 KFHN-00 KFHU-00 KFHN-00 tubing size () O.D. I.D. Resin sleeve ø ø2.5 KFT0-00 ø ø KFT0-00 ø ø5 KFT0U-00 ø KFT0N-00 ø ø.5 KFTU-00 ø7.5 KFTN-00 ø ø KFTU-00 ø9 KFTN-00 Brass sleeve KFH0B-00 KFH0B-00 KFH0B-00 KFHB-00 KFHB-00 Union Tee Used to pipe tubes in both 90 directions. Brass sleeve KFT0B-00 KFT0B-00 KFT0B-00 KFTB-00 KFTB-00 1

24 Insert Fittings Series KF Insert Fittings Swivel Extended Elbow Bulkhead Union Used to pipe tube at right angles to a female. Can be swiveled at any direction. Solid section moves fittings up above a workpiece. Connection tubing size () O.D. I.D. Resin sleeve Brass sleeve ø KFW0 KFW0B ø2.5 KFW0S KFW0BS ø ø ø5 KFW0 KFW0S KFW0 KFW0U KFW0US KFW0B KFW0BS KFW0B ø KFW0U KFW0N KFW0B ø KFW0NS KFW0BS KFW0N KFW0B KFWUS ø.5 KFWU ø KFWU-0S KFWNS KFWBS ø7.5 KFWN KFWB KFWN-0S KFWB-0S ø KFWUS KFWU ø KFWU-0S KFWNS KFWBS ø9 KFWN KFWB KFWN-0S KFWB-0S Used to pipe tubes through a panel. Plug Used to plug unused fittings. tubing size () O.D. I.D. Resin sleeve ø ø2.5 KFE0-00 ø ø KFE0-00 ø ø5 KFE0U-00 ø KFE0N-00 ø ø.5 KFEU-00 ø7.5 KFEN-00 ø ø KFEU-00 ø9 KFEN-00 tubing size () ø ø ø ø ø KFP-0 KFP-0 KFP-0 KFP- KFP- Brass sleeve KFE0B-00 KFE0B-00 KFE0B-00 KFEB-00 KFEB-00 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 15

25 Series M Miniature Fittings Miniature Fittings Series M Features Compact piping space. The hose nipple has a large holding force, allowing easy connection and removal. A wide variety of models is available. Piping in the same direction is possible at different heights. Hose nipple, Hose elbow. Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. Specifications : Metric Size : M,, tubing material M tubing - Max. operating pressure (at 20C) Connection size Thread Hose Nipple Nylon ø/ø2.5 ø/ø 1.5MPa Barb fittings The tube allows easy tubing insertion as well as secure tubing holding. Body With electroless nickel plated Gasket Small tightening torque. Secure sealing. ø.1/ø2.1 Soft nylon ø/ø MPa M,, ø/ø2.5 ø/ø Polyurethane ø2, ø.1/ø2 ø/ø2.5, ø/ø 0.MPa JIS B0209 Class 2 (Metric ), JIS B020 (Taper for piping) Tubing Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. ø2, ø.1/ø2, ø/ø2.5 Cap nut Secure holding is achieved by manual tightening. Easy disconnection of tubing by loosening. Electroless nickel plated. ø2 Miniature Fittings Series M Barb Fittings Barb fittings The tube allows easy tubing insertion as well as secure tubing holding. Tubing PAT. Body With electroless nickel plated Gasket Small tightening torque. Secure sealing. 1

26 Miniature Fittings Series M Miniature Fittings Series Description Barb fittings for nylon tubing Remark(s) ø/2.5 X M-5AN- Application To pipe nylon tubing. Description Hose nipple Remark(s) ø/2.5 X M-5H- ø/ X M-5H- Application To pipe nylon, soft nylon, polyurethane tubing. Barb fittings for soft tubing Barb elbow for nylon tubing Barb elbow for soft tubing Barb elbow for nylon tubing (H) ø/ X ø2/1.2 X ø.1/2.1 X ø.1/2 X ø/2.5 X ø/ X ø/2.5 X ø/ X ø2/1.2 X M ø2/1.2 X ø.1/2.1 X ø.1/2 X ø/2.5 X ø/ X ø/2.5 X M-5AN- M-5AU-2 M-5AU- M-5AU- M-5AU- M-5ALN- M-5ALN- M-ALU-2 M-5ALHU-2 M-5ALU- M-5ALU- M-5ALU- M-5ALHN- ø/ X M-5ALHN- To pipe polyurethane tubing. To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. To pipe nylon tubing Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe polyurethane tubing. To pipe soft nylon tubing. Body rotates To pipe 0 around polyurethane the stud axis. tubing. Position can be fixed after alignment. To pipe soft nylon, polyurethane tubing. To pipe nylon tubing Body rotates 0 around the stud axis. Position can be fixed after alignment. Hose elbow Hose elbow(h) Elbow Tee Universal elbow Universal tee Extension fitting Nipple Universal nipple Bulkhead union ø/2.5 X M-5HL- ø/ X M-5HL- ø/2.5 X M-5HLH- ø/ X M-5HLH- female X female female X female X female female X male female X female X male male X female male X male male X male PAT. X female female M-5L M-5T M-5UL M-5UT M-5J M-5N M-5UN M-5E To pipe nylon, soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. Perpendicular piping. Perpendicular piping in both directions. Body rotates 0 around the stud axis. Position can be fixed after alignment. Body rotates 0 around the stud axis. Position can be fixed after alignment. For D piping to prevent interference between fittings. To connect fittings and equipment or to connect 2 fittings. Body rotates 0 around the stud axis. Panel mount connection Barb elbow for soft tubing (H) Bushing Plug ø2/1.2 X ø.1/2.1 X ø.1/2 X ø/2.5 X ø/ X X female M-5ALHU-2 M-5ALHU- M-5ALHU- M-5ALHU- M-5B M-5P To pipe soft nylon tubing. Body rotates To pipe 0 around polyurethane the stud axis. tubing. Position can be fixed after alignment. To pipe soft nylon, polyurethane tubing. Connection from piping to fittings. To plug unused port. Bulkhead Reducer Manifold Gasket Gasket (H) Rc1/ X female Rc1/ X female (9 port ) Material: PVC Material: Nylon. GF 0% M-5ER M-5M M-5G1 M-5GH Reduction from Rc1/ to. Panel mounting is possible. Rc1/ can be diverted in up to nine stations. Panel mounting is possible. label M-5ALm- M-5ALHm- M-5HL-, M-5HLH-,. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 17

27 Series M Miniature Fittings Miniature Fittings Series M Series Description Remark(s) Application Description Remark(s) Application Barb fittings for soft tubing Barb elbow for soft tubing ø2/1.2 X M ø.1/2.1 X M ø.1/2 X M ø/2.5 X M ø2/1.2 X M ø.1/2.1 X M M-AU-2 M-AU- M-AU- M-ALU-2 To pipe polyurethane tubing. To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. To pipe polyurethane tubing. To pipe soft nylon tubing. Barb fittings for nylon tubing Barb fittings for soft tubing ø/2.5 X ø/ X ø/2.5 X ø/ X M-01AN- M-01AN- M-01AU- M-01AU- To pipe nylon tubing. To pipe soft nylon, polyurethane tubing. Universal elbow Universal tee Nipple ø.1/2 X M ø/2.5 X M M female X M male M female X M female X M male M male X M male M-ALU- M-ALU- M-UL M-UT M-N Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. Body rotates 0 around the stud axis. Position can be fixed after alignment. To connect fittings and equipment or to connect 2 fittings. Hose nipple Hose nipple Plug-in reducer ø/2.5 X ø/ X ø2/1.2 X one-touch ø2/1.2 X one-touch ø2/1.2 X ø2/1.2 X M-01H- M-01H- M-2F-2 M-0F-2 M-2R-2 M-0R-2 To pipe nylon, soft nylon, polyurethane tubing. To pipe polyurethane tubing. To pipe polyurethane tubing. Plug M-P To plug unused M port. Gasket Material PVC M-G Sealant (Thread portion) 1

28 Self Align Fittings Series H, DL, L, LL Self Align Fittings Series H, DL, L, LL Features Ferrule with no orientation. The non-oriented construction is free from mistakes and consequent working loss or accidents when inserting the ferrule into the fitting body are reduced. Hardened ridge ferrule. The single bite construction with a strong ridge prevents breakage of ferrule when tightening. Small pressure loss. A large flow rate is achieved with small flow resistance due to the construction without an insert. Wide variety of styles and sizes. models including swivel styles and 5 provide a wide range of fittings that will fit any application. Specifications tubing material Nylon tubing, Soft nylon tubing, Soft copper tubing (C20T-O) ø, ø, ø, ø, ø Max. operating pressure 1.0MPa Proof pressure MPa Fluid Air Thread portion JIS B 020 (Taper for piping) Thread Nut part JIS B 0211 Class 2 (Metric fine ) Sealant (Thread portion) Note) None or with sealant Note) The male elbow, male branch tee and service tee union with sealant are manufactured upon receipt of order. Main Parts Material Body Nut Ferrule C0BD, C771BE C0BD C2700T : Metric Size : R, Rc Tubing Ferrule Large holding force by metal ferrule. to soft copper. (Not applicable to urethane tubing.) Union nut Flared inside diameter Prevents tubing from deforming inwards. PAT. Tubing holder Prevents tubing sliding during installation. The tubing holding mechanism gives the strong feeling when inserting the tubing and prevents the tubing from sliding when screwing in the tubing. Body FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 19

29 Series H, DL, L, LL Self Align Fittings Self Align Fittings H Male Connector Most coon style used to pipe from female in the same direction. L Swivel Elbow To pipe from the female ed at the right angle. Swiveled at any direction. tubing H0-01 H0-01 H0-01 H -0 H -0 tubing L0-01 L0-01 L0-01 L -0 L -0 DL Male Elbow Most coon style used to pipe from female at a right angle. tubing DL0-01 DL0-01 DL0-01 DL -0 DL -0 LL Swivel Extended Elbow To pipe from the female ed at a right angle. Swiveled at any direction. Solid piece moves fittings up from work piece. tubing LL0-01 LL0-01 LL0-01 LL -0 LL -0 10

30 Self Align Fittings Series H, DL, L, LL Self Align Fittings DT Male Branch Tee To branch the line from the female at 90 in each direction. tubing DY Male Run Tee DT0-01 DT0-01 DT0-01 DT -0 DT To branch the line from the female in the same direction and at 90. tubing To connect tubing through a panel. DE Bulkhead Union tubing -0 DY0-01 DY0-01 DY0-01 DY -0 DY -0 DE0-00 DE0-00 DE0-00 DE-00 DE-00 DT Union Tee To branch tubing into 2 directions each at 90 to the original one. tubing DHF Female Connector tubing DT0-00 DT0-00 DT0-00 DT-00 DT-00 To pipe from the male ed portion of a pressure gauge, etc. tubing DHF0 DHF0 DHF0 DHF DHF Used for trunk connection between tubing and a male installed through a panel. To plug unused self-align fittings. fitting size ø ø ø ø ø Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc/ Rc/ DEF Bulkhead Female Connector DP Plug DEF0 DEF0 DEF DEF DP-0 DP-0 DP-0 DP- DP- FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 11

31 Series KC Self - sealing fittings Self - sealing fittings Series KC Features One-touch fitting with built-in self seal mechanism to prevent air exhaust when removing the tubing. Electroless nickel plated for copper-free applications. Specifications Fluid Max. operating pressure Proof pressure Ambient and fluid temperature Mounting Thread Nut Thread label (Standard) Copper-free specifications (Standard) Air 1.0MPa.0MPa 5 to 0 C (With no condensation) JIS B020 (Taper for piping) JIS B0211, Class 2 (Metric fine ) With sealant All brass parts with electroless nickel plated. : Metric Size : M, R, Rc Tubing Tubing material Tubing O.D. O-ring Retainer Spring Without tubing Nylon, Soft Nylon, Polyurethane ø, ø, ø, ø, ø Valve Built-in self seal mechanism. No air leakage even when the tubing is removed. Stopper Cushion With tubing Tubing Release button O-ring Body Guide Collet Chuck With sealant No need of a sealant tape. PAT. Stud Effective for piping in confined space. The body and portion rotate separately.

32 Self - sealing fittings Series KC Tube Coupler KCH Male Connector For piping in the same direction from the female. KCE Bulkhead Union To connect tubing through a panel. One of 2 ports has a check valve. KCL Male Elbow To pipe from the female at the right angle. KCH0- KCH0- S KCH0 S KCHS KCH -0S KCL0- KCL0- S KCL0 S KCLS KCL -0S KCT Union Tee KCE0-00 KCE0-00 KCE0-00 KCE-00 KCE-00 To branch tubing into 2 directions each at 90 to the original one. KCU Union Y To branch tubing in the same direction. Only branches have integral check valves. KCT0-00 KCT0-00 KCT0-00 KCT-00 KCT-00 KCU0-00 KCU0-00 KCU0-00 KCU-00 KCU-00 KCH Straight Union To connect tubing in the same direction. One of 2 ports has a check valve. KCJ Check Adaptor To be connected to a series KQ one-touch fitting to provide tube coupler function. KCH0-00 KCH0-00 KCH0-00 KCH-00 KCH-00 KCJ0-99 KCJ0-99 KCJ0-99 KCJ-99 KCJ-99 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1

33 Series KC Self - sealing fittings Tube Coupler KCH Straight Plug for Frequent Use To save tube cutting labor in cases where tubing is frequently connected and removed. To connect tubing in the same direction as the tube coupler. KCH0-99 KCH0-99 KCH0-99 KCH-99 KCH-99 KCE Bulkhead Female Union Used for trunk connection between tubing and a male installed through a panel. 1/ 1/ / / / KCE0 KCE0 KCE0 KCE KCE KCL Elbow Plug for Frequent Use To save tube cutting labor in cases where tubing is frequently connected and removed. To connect a tubing at a right angle to the tube coupler. KCL0-99 KCL0-99 KCL0-99 KCL-99 KCL-99 1

34 Multi-Connector with One-Touch Fittings Series DMK Multi-Connector with One-Touch Fittings Series DMK Features With one-touch fitting. to nylon, soft nylon and polyurethane tubing. Installation processes are considerably reduced. Simpler installation and less labour compared with use of numerous bulkhead unions for panel mounting. Secure tubing retention. Tubing can be firmly connected to the multiconnector in one-step operation (with one-touch fitting). No. of connecting tubes Two types, with and connecting tubing, are available. Specifications tubing material Fluid Max. operating pressure Ambient and fluid temperature Nylon, Soft Nylon, Polyurethane ø, Air 1.0MPa 5 to 0 C (With no condensation) : Metric Size No. of connecting tubing: or How to Order DMK No. of connecting tubing P S Configuration Multi connector Plug side Socket side 0 Accessories (Optional) - C1 C2 Nil Single side cover (1 pc.) Both sides cover (2 pcs.) DMK No. of connecting tubing tubing O.D. Multiconnector Plug side With cover Socket side DMK-2 DMKP-2 DMKS-2 DMK-0 DMKP-0 DMKS-0 Tubing O.D. 2 0 Socket Socket case Holder Plug Plug case The protrusion and recession on both surfaces can be fit for engagement at the prescribed position. DMK No. of connecting tubing tubing O.D. Multiconnector Plug side Socket side DMK-2 DMKP-2 DMKS-2 DMK-0 DMKP-0 DMKS-0 Cover U-ring Secure sealing. Spacer Plate Clamp ring Connects the socket and plug. PAT. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 15

35 Series KDM Rectangular Multi-Connector Rectangular Multi-Connector Series KDM Features Substantial reduction of mounting space. Requires less installation space compared with use of numerous bulkhead unions for panel mounting. One-touch installation and removal of connector. Numbers of pipes can be connected and disconnected instantly without connection errors, saving substantial labour in installation. One-touch tubing connection. One-touch fittings substantially cut down man hours for piping. : Metric Size No. of connecting tubing: or 20 Specifications KDM Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Tubing Tubing material Tubing O.D. Plate Plug connector Socket connector Screw for bracket E type snap ring Air 1.0MPa 0kPa 1.5MPa 5 to 0 C (With no condensation) Nylon, Soft nylon, Polyurethane ø, ø, ø, ø Panel mounting bracket (Standardized) Mounting only requires operation on the panel front. No need to make mounting screw holes. (Allows up to 5 of panel thickness) Clamp bolt No. of connecting tubing KDM20 No. of connecting tubing 20 KDM KDM Packing PAT.PEND Compatible with vacuum of -0kPa to 1 MPa With one-touch fitting Socket case Tubing of different diameters can be used together. Plug case Metric size ø, ø, ø, ø Engagement in the prescribed For application requiring copper-free material (Electroless nickel plated) position can be achieved by fitting both surfaces. Two types, with and 20 connecting tubing are available. 1

36 Flame Resistant One-Touch Fittings Series KR Flame Resistant One-Touch Fittings Series KR Features Push-in collet type For flame resistant soft nylon tube ø, ø, ø, ø tube Sealant on ed portion For air and water, vacuum or pressure applications Low disconnecting force (prevents biting) Flame resistance equivalent to UL-9 standard V-0 Specifications : Metric Size : R, Rc Fluid Air, Water Note1) Max. operating pressure 1.0MPa Proof pressure.0mpa Ambient and fluid temperature 5 to 0 C, In case of water: 0 to 0 C (With no condensation) Mounting JIS B020 (Taper for piping) Thread Nut JIS B0211, Class 2 (Metric fine ) Sealant (Thread portion) With sealant (Standard) Note1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Tubing Tubing material Tubing O.D. Series KR: Black body. Series KR-W2: White Body - See Best Pneumatics Guide Collet Chuck to soft nylon. Large retaining force. Secure engagement with chuck and large retaining force with collet. Flame resistant double layer, flame resistant soft nylon ø, ø, ø, ø Cover (Option) Prevents releasing of the tubing due to spatter invasion or adhesion. Release button Series KR: Black body. Requires little force for removal. Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. Packing Compatible with a wide range of pressure, from low vacuum to 1.0 MPa. The special shape ensures sealing and reduces resistance of tubing insertion. With sealant No need of a sealant tape. Body O-ring Stud Tubing Effective for piping in confined space. The body and portion can be rotated. (For positioning) PAT. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION

37 Series KR Flame Resistant One-Touch Fittings Flame Resistant One-Touch Fittings KRH Male Connector Most coon style used to pipe from female in the same direction. Release button, KRH( Green ) KRH0 S KRH0 S KRH S -0S KRHS -0S KRK 5 Male Elbow For piping at 5 from female. Intermediate model between male connector and male elbow. KRK (Black) KRK0 S KRK0 S KRK S -0S KRKS -0S KRL Male Elbow Most coon style used to pipe from female at a right angle. KRL(Black) KRL0 S KRL0 S KRL S -0S KRLS -0S KRW Extended Male Elbow Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. KRW(Black) KRW0 S KRW0 S KRWS -0S KRWS -0S KRV Universal Male Elbow The hexagon head of the body is used to tighten the body with a box wrench in a confined space. KRV(Black) KRV0 S KRV0 S KRVS KRV -0S KRE-W2 Bulkhead Female Union Used for trunk connection between tubing and a male installed through a panel. Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ Rc1/2 KRE-W2 (White) KRE0-01W2 W2 W2 This model is KRE0-01W2 not available W2 with black body W2 specifications. KREW2 W2 KREW2 W2-0W2 1

38 Flame Resistant One-Touch Fittings Series KR Flame Resistant One-Touch Fittings KRT Branch Tee To branch the line from the female at 90 in each direction. KRU Union Y To branch tubing in the same direction. KRT (Black) KRT0 S KRT0 S KRT S -0S KRTS -0S KRU(Black) KRU0 S KRU0 S KRUS -0S KRUS -0S KRY Male Run Tee To branch the line from the female in the same direction and at 90. KRY (Black) KRY0 S KRY0 S KRY S -0S KRYS -0S KRH Straight Union To connect tubing in the same direction. KRE Bulkhead Union To connect tubing through a panel. KRH (Black) KRH0-00 KRH0-00 KRH-00 KRH-00 KRE( Release button, Green ) KRE0-00 KRE0-00 KRE-00 KRE-00 KRL Union Elbow To connect tubing at right angles to each other. KRL (Black) KRL0-00 KRL0-00 KRL-00 KRL-00 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 19

39 Series KR Flame Resistant One-Touch Fittings Flame Resistant One-Touch Fittings KRT Union Tee To branch tubing into 2 directions each at 90 to the original one. KRP Plug To plug unused one-touch fittings. KRT (Black) KRT0-00 KRT0-00 KRT-00 KRT-00 Fitting size KRP-0 KRP-0 KRP- KRP- KRU Union Y KR Spatter Cover 1 To branch tubing in the same direction. KRR Plug-In Reducer To connect to a smaller one-touch fitting. Fitting size KRU (Black) KRU0-00 KRU0-00 KRU-00 KRU-00 KRR (Black) KRR0-0 - KRR0- - KRR- Prevents releasing of the tubing due to spatter invasion or adhesion. KR ( tubing: FR soft nylon) Fitting size KR Spatter Cover 2 KR-0C KR-0C KR-C KR-C Prevents releasing of the tubing due to spatter invasion or adhesion. KR ( tubing: FR soft nylon, FR2 layer) Fitting size KR-0C1 KR-0C1 KR-C1 KR-C1 KRU Plug-In Y To branch the line from a one-touch fitting into tubing in the same direction. Fitting size KRU (Black) KRU0-99 KRU0-99 KRU-99 KRU

40 Flame Resistant One-Touch Fitting Manifold Series KRM Flame Resistant One-Touch Fitting Manifold Series KRM Features One-touch tubing manifold. Flame resistance equivalent to UL-9 standard V-0. - outlets. For air and water. For vacuum or pressure applications. Specifications Fluid Max. operating pressure Proof pressure Ambient and fluid temperature Thread Accessory Tubing KRM11 KRM Note 1) Air, Water 1.0MPa.0MPa 5 to 0 C,In case of water: 0 to 0 C (With no condensation) JIS B020 (Taper for piping) None Hexagon socket head plug: 1 pc Note 1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. KRM11 KRM Port A One-touch fitting One-touch fitting Porting Port B One-touch fitting Rc female Number of port A,, Port A Connection size ø tubing ø tubing ø tubing ø tubing : Metric Size : Rc Port B Connection size ø tubing ø tubing Rc1/ Rc/ Tubing material Tubing O.D. FR double layer, FR soft nylon ø, ø, ø, ø Construction KRM11 KRM FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 151

41 Series KRM Flame Resistant One-Touch Fitting Manifold Flame Resistant One-Touch Fittings Manifold KRM11 B A A B Number of port A KRM KRM KRM A A Connection Rc1/ Rc/ Number of port A KRM-0- - KRM-0- - KRMC Spatter Cover KRMC ( tubing: FR soft nylon) N KRMC-0- - KRMC

42 Stainless Steel One-Touch Fittings Series KG Features Stainless steel specification compatible with corrosive environment. 0 stainless steel used for metal parts. Stainless Steel One-Touch Fittings Series KG Suitable for use in CRT production lines for copper free environment, for food processing machine washing to endure water or salt splashes and for use in clean rooms to prevent particle generation resulting from corrosion. Tube sizes Ø - 1 Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Mounting Thread Nut Sealant (Thread portion) Note1) to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure. Note2) Suffix "S" to part number if sealant is desired. Tubing Tubing material Tubing O.D. Air, Water Note1) 1.0MPa 0kPa.0MPa 5 to 0 C, In case of water: 0 to 0 C (With no condensation) JIS B020 (Taper for piping) JIS B0211, Class 2 (Metric fine ) With / Without sealant Note2) Nylon, Soft nylon, Polyurethane ø, ø, ø, ø, ø, ø1 : Metric Size :, R, Rc Guide Collet Chuck to nylon and polyurethane. Large retaining force. Secure engagement with chuck and large retaining force with collet. Release button (White) Requires little force for removal. Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. Packing Compatible with a wide range of pressure, from low vacuum to 1.0MPa. The special shape ensures sealing and reduces resistance in tubing insertion. PAT. Tubing Body (White) O-ring Stud Effective for piping in confined space. The body and portion can be rotated. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 15

43 Series KG Stainless Steel One-Touch Fittings Stainless Steel One-Touch Fittings KGH Male Connector Most coon style used to pipe from female in the same direction. <> <R> 1 KGH KGH KGH0-01 KGH-01-0 KGH -0 KGH1 The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. <> <R> KGS Hex. Socket Head Male Connector KGC Tubing Cap To plug unused tubing. 1-0 KGS KGS KGS0-01 KGS-01-0 KGS -0 KGC0-00 KGC0-00 KGC0-00 KGC-00 KGC-00 KGC1-00 KGL Male Elbow Most coon style used to pipe from female at a right angle. <> <R> Basically used in the same way as a male elbow. But also used in dimensional piping to prevent interference of fittings. <> <R> 1 KGW Extended Male Elbow KGL Plugin Elbow KGL KGL KGL0-01 KGL-01-0 KGL -0 KGL1-0 KGW KGW KGW0-01 KGW -0 KGW -0 To change the tubing direction from a one-touch fitting by 90. Fitting size KGL0-99 KGL0-99 KGL0-99 KGL-99 KGL-99 15

44 Stainless Steel One-Touch Fittings Series KG Stainless Steel One-Touch Fittings KGV Universal Male Elbow The hexagon head of the body is used to tighten the body with a box wrench in a confined space. <> <R> KGU Union Y To branch tubing in the same direction. <> <R> KGR Plug-In Reducer To connect to a smaller one-touch fitting. Fitting size 1 1 KGV KGV KGV0-01 KGV KGV -0 KGU KGU KGU0-01 KGU -0 KGU -0 KGR KGR KGR0- - KGR- -1 KGR-1 KGY Male Run Tee To branch the line from the female in the same direction and at 90. <> <R> KGT Male Branch Tee To branch the line from the female at 90 in each direction. <> <R> 1 1 KGY KGY KGY0-01 KGY-01-0 KGY -0 KGY1-0 KGT KGT KGT0-01 KGT-01-0 KGT -0 KGT1-0 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 155

45 Series KG Stainless Steel One-Touch Fittings Stainless Steel One-Touch Fittings KGLU Male Branch Connector To branch the line from the female at a right angle. <> <R> KGUD Double Branch KGLU KGLU0- KGLU0-01 KGLU KGLU To branch the line from the female into tubes in the same direction. To connect tubing through a panel. tubing O.D. 1 KGE Bulkhead Union KGT Union Tee KGUD0-01 KGUD0-01 KGE0-00 KGE0-00 KGE0-00 KGE-00 KGE-00 KGE1-00 To branch tubing into 2 directions each at 90 to the original one. 1 KGT0-00 KGT0-00 KGT0-00 KGT-00 KGT-00 KGT1-00 KGD Delta Union To branch the line from the female into 2 directions at right angles. <> <R> KGH Straight Union To connect tubing in the same direction. tubing O.D. KGL Union Elbow To connect tubing at right angles to each other. 1 KGU Union Y To branch tubing in the same direction. KGD KGD KGD0-01 KGD -0 KGD -0 KGH0-00 KGH0-00 KGH0-00 KGH-00 KGH-00 KGL0-00 KGL0-00 KGL0-00 KGL-00 KGL-00 KGL1-00 KGU0-00 KGU0-00 KGU0-00 KGU-00 KGU-00 15

46 Stainless Steel One-Touch Fittings Series KG Stainless Steel One-Touch Fittings KGH Different Dia. Straight To connect tubing of different diameters. a b a b KGLU Branch Union Elbow To branch a tube at a right angle into two tubes. KGH0-0 KGH0-0 KGH0- KGH- KGLU0-00 KGLU0-00 KGLU0-00 KGLU-00 KGLU-00 KGT Different Dia. Tee To branch the tubing into two at a right angle and reduce the resulting branches in size. 2- a a b KGT0-0 KGT0-0 KGT0- KGT- KGU Different Dia. Union Y To branch tubing into 2 smaller tubes in the same direction as the original one. 2- a b b a b KGU0-0 KGU0-0 KGU0- KGU- KGUD Different Dia. Double Union Y To branch tubing into smaller tubes in the same direction as the original one. - a b a b KGUD0-0 KGUD0-0 KGE Bulkhead Female Connector Used for trunk connection between tubing and a male installed through a panel. Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc/ Rc1/2 Rc/ 1 Rc1/2 KGE0-01 KGE0-01 KGE0-01 KGE KGE -0 KGE1-0 KGF Female Connector To pipe from the male ed portion of a pressure gauge, etc. Rc1/ Rc1/ Rc1/ Rc1/ Rc/ Rc1/ Rc1/ Rc/ Rc1/ Rc/ Rc1/ Rc/ Rc1/2 KGD Delta Union KGF0-01 KGF0-01 KGF0-01 KGF KGF -0 To connect tubes at right angles with each other. KGD0-00 KGD0-00 KGD0-00 KGD-00 KGD-00 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 157

47 Series KQG Stainless Steel 1 One-Touch Fittings Stainless Steel 1 One-Touch Fittings Series KQG Features 1 Stainless Steel one-touch fittings. Grease free with FKM seals. Suitable for air, water or steam up to 150 C. Wide variety of tubing can be used. Optional inner sleeve for softer tubing. Specifications Operating fluid Operating pressure range Note 1) Proof pressure Note 2) Ambient and Operating fluid temperature Lubricant Seal on the s How to Order See part number listing on next page. Optional Inner Sleeves Tube size TU (Polyurethane) Tubing model (Material) TUS (Soft polyurethane) TH (FEP) TL (PFA) Air, Water, Steam Note ) 0 kpa to 1MPa.0 MPa 5 to 150 C (No freezing) Grease-free specification With sealant Note 1) Please avoid using in a vacuum holding application such as a leak tester, since there is leakage. Note 2) When using at 0 C or higher, for an extended period of time, we recoend that an inner sleeve be used. Note ) In the event of using polyurethane tubing, we recoend the use of an inner sleeve in cases where the tubing is strained. Note ) Special FKM that is resistant even when steam is used. inner sleeve TJ-002 TJ5 TJ-00 TJ-00 TJ-005 TJ-00 TJ-5 TJ-75 TJ-0 TJ-09 TJ- Length Tubing Tubing material Tubing O.D. FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin ø, ø, ø, ø, ø Construction No Description Release bushing Guide Chuck Seal Male connector body Male elbow body O-ring Stopper ring Stud Material Stainless steel 1 Stainless steel 1 Stainless steel 1 Special FKM Stainless steel 1 Stainless steel 1 Special FKM Stainless steel 1 Stainless steel 1 15

48 Stainless Steel 1 One-Touch Fittings Series KQG KQGH Male Connector KQGL Union Elbow tubing O.D. () ø ø ø ø ø Connection () ø ø ø ø ø tubing O.D. () Connection KQGH0- KQGH0 KQGH0- KQGH0 KQGH0S KQGH0 KQGH0S KQGH0 KQGHS KQGH KQGH KQGH-0S KQGS Hexagon Socket Head Male Connector tubing O.D. () ø ø ø ø ø ø ø ø ø ø Connection KQGS0- KQGS0 KQGS0- KQGS0 KQGS0S KQGS0 KQGS0S KQGS0 KQGSS KQGS KQGS KQGS-0S KQGH Straight Union KQGH0-00 KQGH0-00 KQGH0-00 KQGH-00 KQGH-00 KQGL Male Elbow KQGL0- KQGL0 KQGL0- KQGL0 KQGL0S KQGL0 KQGL0S KQGL0 KQGLS KQGL KQGL KQGL-0S () ø ø ø ø ø tubing O.D. () ø ø ø ø ø Connection () ø ø ø ø ø () ø ø ø ø ø KQGL0-00 KQGL0-00 KQGL0-00 KQGL-00 KQGL-00 KQGT Male Branch Tee KQGT Union Tee () ø ø ø ø ø KQGT0- KQGT0 KQGT0- KQGT0 KQGT0S KQGT0 KQGT0S KQGT0 KQGTS KQGT KQGT KQGT-0S KQGT0-00 KQGT0-00 KQGT0-00 KQGT-00 KQGT-00 KQGU Union Y KQGU0-00 KQGU0-00 KQGU0-00 KQGU-00 KQGU-00 KQGE Bulkhead Union KQGE0-00 KQGE0-00 KQGE0-00 KQGE-00 KQGE-00 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 159

49 Series KFG Stainless Steel 1 Insert Fittings Stainless Steel 1 Insert Fittings Series KFG Features Material: Stainless Steel 1. Operating fluid temperature 5 to 150 C. tubing material: FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin Can be used with steam. Grease-free. Specifications Operating fluid Operating pressure range Note 1) Proof pressure Ambient and Operating fluid temperature Note 2) Lubricant Seal on the s tubing Series TH TL T TS TU TPH TPS Tubing O.D. FEP PFA Nylon Soft nylon Polyurethane Polyolefin Soft polyolefin Air, Water, Steam 0 kpa to 1MPa.0 MPa 5 to 150 C (No freezing) Grease-free specification With sealant Tubing O.D. x I.D. ø x ø2,5 ø x ø ø x ø ø x ø7,5 ø x ø9 Tube can be connected without fully removing the nut. Prevents the tube from disconnecting during piping. Union nut Fastens lightly. Adhesion or binding also prevented. Body Sleeve The insert mechanism provides a reliable retaining force on the tube. Guide 10

50 Stainless Steel 1 Insert Fittings Series KFG Male Connector: KFGH Most coon style used to pipe from female in the same direction. Male Branch Tee: KFGT To branch the line from the female at 90 in each direction. tubing size O.D. I.D. Connection tubing size O.D. I.D. Connection ø ø ø ø ø ø2.5 ø ø ø7.5 ø9 KFGH025 KFGH025S KFGH00 KFGH00S KFGH00 KFGH00S KFGH00 KFGH75S KFGH75 KFGH75-0S KFGH09S KFGH09 KFGH09-0S ø ø ø ø ø ø2.5 ø ø ø7.5 ø9 KFGT025 KFGT025S KFGT00 KFGT00S KFGT00 KFGT00S KFGT00 KFGT75S KFGT75 KFGT75-0S KFGT09S KFGT09 KFGT09-0S Male Elbow: KFGL Most coon style used to pipe from female at a right angle. Straight Union: KFGH To connect tubing in the same direction. tubing size O.D. ø ø ø ø ø I.D. ø2.5 ø ø ø7.5 ø9 Connection KFGL025 KFGL025S KFGL00 KFGL00S KFGL00 KFGL00S KFGL00 KFGL75S KFGL75 KFGL75-0S KFGL09S KFGL09 KFGL09-0S tubing size O.D. ø ø ø ø ø I.D. ø2.5 ø ø ø7.5 ø9 Union Tee: KFGT tubing size O.D. I.D. ø ø ø ø ø ø2.5 ø ø ø7.5 ø9 KFGH KFGH00-00 KFGH00-00 KFGH75-00 KFGH09-00 To branch tubing into 2 directions each at 90 to the original one. KFGT KFGT00-00 KFGT00-00 KFGT75-00 KFGT09-00 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 11

51 Series MS Stainless Steel Miniature Fittings Stainless Steel Miniature Fittings Series MS Features Can be used in corrosive applications. Stainless steel material (SUS1). Compact piping space. The hose nipple has a large holding force, allowing easy connection and removal. A wide variety of models is available. Piping in the same direction is possible at different heights. Hose Nipple, Hose elbow. Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. : Metric Size : Specifications tubing material tubing diameter Max. operating pressure (At 20 C) Connection size Body Material Gasket Hose Nipple Barb The tube allows easy tubing insertion as well as secure tubing holding. Nylon Soft nylon Polyurethane ø/ø2.5 ø/ø2.5 ø.1/ø2 ø.1/ø2.1 ø/ø ø/ø ø/ø2.5, ø/ø 1.5MPa 1.0MPa (JIS B0209, Class 2: Metric coarse ) 0.MPa SUS1 SUS 0, Aluminium Tubing Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing. Body Stainless steel 1 Gasket Small tightening torque. Secure sealing. Cap nut Secure holding is achieved by manual tightening. Easy disconnection of tubing by loosening. Stainless steel 1 Barb Fittings Barb The tube allows easy tubing insertion as well as secure tubing holding. Tubing Body Stainless steel 1 Gasket Small tightening torque. Secure sealing.

52 Stainless Steel Miniature Fittings Series MS Stainless Steel Miniature Fittings Series Description Barb fittings for soft tubing Remark(s) ø.1/2.1 X ø.1/2 X MS-5AU- Application To pipe soft nylon tubing. To pipe polyurethane tubing. Description Universal elbow Remark(s) female X male MS-5UL Application Body rotates 0 around the stud axis. Position can be fixed after alignment. ø/2.5 X ø/ X MS-5AU- MS-5AU- To pipe soft nylon, polyurethane tubing. Universal tee Bushing female X female X male X female MS-5UT MS-5B Body rotates 0 around the stud axis. Position can be fixed after alignment. Connection from piping to fittings. Barb elbow for soft tubing Hose nipple Hose elbow ø.1/2.1 X ø.1/2 X ø/2.5 X ø/ X ø/2.5 X ø/ X ø/2.5 X ø/ X MS-5ALHU- MS-5ALHU- MS-5ALHU- MS-5H- MS-5H- MS-5HLH- MS-5HLH- To pipe soft nylon tubing. Body rotates To pipe 0 around polyurethane the stud axis. tubing. Position can be fixed after alignment. To pipe soft nylon, polyurethane tubing. To pipe nylon, soft nylon, polyurethane tubing. To pipe nylon, soft nylon, polyurethane tubing. Body rotates 0 around the stud axis. Position can be fixed after alignment. Plug Extension fitting Nipple Universal nipple Universal tee for soft tubing male X female male X male male X male PAT ø.1/2.1 X ø.1/2 X ø/2.5 X ø/ X MS-5P MS-5J MS-5N MS-5UN MS-5ATHU- MS-5ATHU- MS-5ATHU- To plug unused port. For D piping to prevent interference between fittings. To connect fittings and equipment or to connect 2 fittings. Body rotates 0 around the stud axis. Body rotates 0 around the stud axis. Position can be fixed after alignment. To pipe soft nylon tubing. To pipe polyurethane tubing. To pipe soft nylon, polyurethane tubing. Gasket Material: PVC M-5G1 Sealant ( portion) Gasket (H) Material: Nylon GF 0% M-5GH Only for MS-5ALHU-, MS-5HLH-, MS-5HLH- and MS-5ATHU-. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1

53 Series KA Antistatic One-Touch Fittings Antistatic One-Touch Fittings Series KA Features One-touch collet mechanism. Compatible with vacuum to 0 kpa of pressure. Can be used for copper-free applications. Flame resistant (Equivalent to UL-9 Standards V-0). Conductive resin is used for the body sealant of fittings Specifications Fluid Max. operating pressure Operating vacuum pressure Proof pressure Ambient and fluid temperature Mounting Sealant (Thread portion) Copper-free specifications Surface resistance Tubing Tubing material Tubing O.D. Packing Compatible with a wide range of pressure, from low vacuum to 1.0 MPa. The special shape ensures sealing and reduces resistance of tubing insertion. Body O-ring Air 1.0MPa 0kPa.0MPa 0 to 0 C Uni, screw JIS B0209, Class 2 (Metric coarse ) Gasket Brass parts are all electroless nickel plated. to 7 Ω Antistatic soft nylon, Antistatic polyurethane ø, ø, ø, ø, ø, ø : Metric Size : M, Uni- Chuck Large retaining force. Secure engagement with chuck and large retaining force with collet. Collet Guide Stud Effective for piping in confined space. The body and portion can be rotated. (For positioning) Gasket Uni Tubing Release button (Black) Requires little force for removal. Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing. 1

54 Antistatic One-Touch Fittings Series KA Antistatic One-Touch Fittings KAH Male Connector Most coon style used to pipe from female in the same direction. KAT Male Branch Tee To branch the line from the female at 90 in each direction. KAL Male Elbow M Uni 1/ M Uni 1/ Uni 1/ M Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/2 Uni 1/ Uni / Uni 1/2 M Uni 1/ M Uni 1/ Uni 1/ M Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/2 Uni 1/ Uni / Uni 1/2 KAH2- -M -U01 KAH0- -M -U01 -U02 KAH0- -M -U01 -U02 -U0 KAH0-U01 -U02 -U0 KAH-U01 -U02 -U0 -U0 KAH-U02 Most coon style used to pipe from female at a right angle. -U0 -U0 KAL2- -M -U01 KAL0- -M -U01 -U02 KAL0- -M -U01 -U02 -U0 KAL0-U01 -U02 -U0 KAL-U01 -U02 -U0 -U0 KAL-U02 -U0 -U0 KAY Male Run Tee M Uni 1/ M Uni 1/ Uni 1/ M Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/2 Uni 1/ Uni / Uni 1/2 M Uni 1/ M Uni 1/ Uni 1/ M KAT2- -M -U01 KAT0- -M -U01 -U02 KAT0- -M -U01 -U02 -U0 KAT0-U01 -U02 -U0 KAT-U01 -U02 -U0 -U0 KAT-U02 -U0 -U0 To branch the line from the female in the same direction and at 90. Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/2 Uni 1/ Uni / Uni 1/2 KAY2- -M -U01 KAY0- -M -U01 -U02 KAY0- -M -U01 -U02 -U0 KAY0-U01 -U02 -U0 KAY-U01 -U02 -U0 -U0 KAY-U02 -U0 -U0 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 15

55 Series KA Antistatic One-Touch Fittings Antistatic One-Touch Fittings KAU Union Y To branch tubing in the same direction. KAT Branch Tee To branch a tubing into 2 directions each at 90 to the original one. M Uni 1/ M Uni 1/ Uni 1/ M Uni 1/ Uni 1/ Uni / Uni 1/ Uni 1/ Uni / Uni 1/ Uni / Uni 1/2 Uni 1/ Uni / Uni 1/2 KAH Straight Union To connect tubing in the same direction. KAL Union Elbow To connect tubing at right angles to each other. KAU2- -M -U01 KAU0- -M -U01 -U02 KAU0- -M -U01 -U02 -U0 KAU0-U01 -U02 -U0 KAU-U02 -U0 -U0 KAU-U02 -U0 -U0 KAH2-00 KAH0-00 KAH0-00 KAH0-00 KAH-00 KAH-00 KAL2-00 KAL0-00 KAL0-00 KAL0-00 KAL-00 KAL-00 KAU Union Y To branch tubing in the same direction. KAH Different Dia. Straight To connect tubing of different diameters. a b a b KAR Plug-In Reducer To connect to a smaller one-touch fitting. Fitting size KAT2-00 KAT0-00 KAT0-00 KAT0-00 KAT-00 KAT-00 KAU2-00 KAU0-00 KAU0-00 KAU0-00 KAU-00 KAU-00 KAH2-0 KAH0-0 KAH0-0 KAH0- KAH- KAR2-0 KAR KAR KAR0- - KAR- 1

56 Clean One-Touch Fittings Series KP Clean One-Touch Fittings (For Air Blow Applications) Series KP Features Completely oil free. Tube sizes to avaiable. Liquid contact parts are non-metal. Components are washed, assembled and double packed in a clean room. Compatible with vacuum pressure (-0kPa). Specifications Particle generation grade Fluid Max. operating pressure (20 C) Operating vacuum pressure Proof pressure (20 C) Ambient and fluid temperature Thread Recoended Tubing Tubing material Tubing O.D. Grade 1 Air, Nitrogen gas, Water (Pure water) 1MPa 0kPa MPa 5 to 0 C (With no condensation) JIS B020 (Taper for piping) Note 1) Refer to the particle generation grade classifications. Note 2) Contact SMC for other types of fluids. Note ) The max. operating pressure is one at 20 C. Note ) When water is used as the operating fluid, do not allow the surge pressure to exceed the max. operating pressure. Caution Series KP is designed for clean blow and use in washing lines. Consult SMC for use in other applications. Sealant material: EPDM does not have sufficient resistance to mineral oil and is not suitable for piping of general pneumatic equipment. Polyolefin: Series TPH Soft polyolefine: Series TPS ø, ø, ø, ø, ø Note 1) Note) Note 2) : Metric Size : R Particle Generation Grade Classifications Average particle concentration particles/ft Grade Grade Grade 2 Grade Particle Diameter m or less Polyurethane tubing: Series TU, Nylon tubing: Series T, Soft nylon tubing: Series TS also can be used though with lower degree of cleanliness. Collet Polypropylene resin Seal (Oil free) EPDM Special configuration for reliable sealing and low resistance when inserting tube. Guide SUS0 stainless steel Clean tubing Polyolefin resin PAT. Body Polypropylene resin O-ring (Oil free) EPDM Drive bushing SUS0 stainless steel The body can be rotated to position the piping entry (For positioning purpose). Stud Polypropylene resin FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION Release button Light force for removal Polypropylene Releases the chuck collet when tubing is removed. Also prevents the chuck from biting excessively into the tubing. Chuck SUS0 stainless steel The chuck provides a secure bite, while holding force is increased by the collet. Cushion (Oil free) EPDM Stopper dust check EPDM Holds the cushion and secures the seal. Suppresses sliding of the seal to prevent generation of particulates.

57 Series KP Clean One-Touch Fittings Clean One-Touch Fittings KPH Male Connector Most coon style used to pipe from female in the same direction. KPY Male Run Tee To branch the line from the female in the same direction and at 90. KPH0-01 KPH0-01 KPH0-01 KPH KPH -0 KPY0-01 KPY0-01 KPY0-01 KPY KPY -0 KPL Male Elbow Most coon style used to pipe from female at a right angle. KPU Union Y To branch tubing in the same direction. KPL0-01 KPL0-01 KPL0-01 KPL KPL -0 KPU0-01 KPU0-01 KPU0-01 KPU KPU -0 KPT Male Branch Tee To branch the line from the female at 90 in each direction. KPH Straight Union To connect tubing in the same direction. KPT0-01 KPT0-01 KPT0-01 KPT KPT -0 KPH0-00 KPH0-00 KPH0-00 KPH-00 KPH-00 1

58 Clean One-Touch Fittings Series KP Clean One-Touch Fittings KPL Union Elbow To connect tubing at right angles to each other. KPR Plug In Reducer To connect to a smaller one-touch fitting. KPL0-00 KPL0-00 KPL0-00 KPL-00 KPL-00 Fitting size KPR KPR0-0 - KPR0- - KPR- KPT Union Tee To branch tubing into 2 directions each at 90 to the original one. KPP Plug To plug unused one-touch fittings. Fitting size KPU Union Y To branch tubing in the same direction. KPT0-00 KPT0-00 KPT0-00 KPT-00 KPT-00 KPP-0 KPP-0 KPP-0 KPP- KPP- KPU0-00 KPU0-00 KPU0-00 KPU-00 KPU-00 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 19

59 Series KPQ/KPG Clean One-Touch Fittings Clean One-Touch Fittings Series KPQ/KPG Features Wide range of port sizes of to 1/2 Use of Polypropylene for resin parts. Tube size Ø - available. Low particle generation suitable for clean room application. Specifications Particle generation grade Fluid Grade 1 Note 1) Air Max. operating pressure (20 C) 1MPa Note 2) Operating vacuum pressure Proof pressure (20 C) Ambient and fluid temperature Thread 0kPa MPa 5 to 0 C (With no condensation) JIS B020 (Taper for piping) Note 1) Refer to the particle generation grading chart. Internal parts are not included in the grading because of greasing on sealant. Note 2) The max. operating pressure is one at 20 C. Principal Parts Material Body Stud Chuck Guide, Stopper Collet, Release button Seal, O-ring, Bumper Recoended Tubing Tubing material Tubing O.D. Series KPQ Series KPG Polypropylene resin Brass (Electroless nickel plated) Stainless steel 0 Stainless steel 0 Brass (Electroless nickel plated) Stainless steel 0 Polypropylene resin NBR Polyurethane: Series - ø, ø, ø, ø, ø Series KPQ Brass (electroless nickel plated) Release button: Light gray Nylon tubing: Series T, Soft nylon tubing: Series T and Series TS soft nylon tubing can also be used through with lower degree of cleanliness. : Metric Size : M, R Particle Generation Grading Average particle concentration particles/ft Series KPG Stainless steel 0 Release button: Light blue Grade Grade Grade 2 Grade Particle Diameter µm or less Body Polypropylene MDriving air piping system Release Button Polypropylene KPQ: Light grey KPG: Light blue Stud KPQ: Brass (Electroless nickel plated) KPG: Stainless (SUS0) In case of half union Body KPQ: Brass (Electroless nickel plated) KPG: Stainless (SUS0) Inside clean room Clean fittings KPQ/KPG PAT. Relief port piping Exhaust piping for solenoid valve Piping for regulator breathing Drain piping 0

60 Clean One-Touch Fittings Series KPQ/KPG Clean One-Touch Fittings KPQH/KPGH Male Connector Most coon style used to pipe from female in the same direction. KPQT/KPGT Union Tee To branch a tubing into 2 directions each at 90 to the original one. KPQH KPGH KPQT KPGT KPQH0- KPQH0-01 KPGH0- KPGH0-01 KPQT0- KPQT0-01 KPGT0- KPGT0-01 KPQH0 KPGH0 KPQT0 KPGT0 <> KPQH0- KPQH0-01 KPGH0- KPGH0-01 <> KPQT0- KPQT0-01 KPGT0- KPGT0-01 KPQH0 KPGH0 KPQT0 KPGT0 KPQH0-01 KPQH0 KPGH0-01 KPGH0 KPQT0-01 KPQT0 KPGT0-01 KPGT0 <R> KPQH KPQH KPQH KPQH-0 KPGH KPGH KPGH KPGH-0 <R> KPQT KPQT KPQT KPQT-0 KPGT KPGT KPGT KPGT-0 KPQL/KPGL Male Elbow KPQY/KPGY Male Run Tee Most coon style used to pipe from female at a right angle. <> <R> KPQL KPQL0- KPQL0-01 KPQL0 KPQL0- KPQL0-01 KPQL0 KPQL0-01 KPQL KPQL KPQL0 KPQL KPQL-0 KPGL KPGL0- KPGL0-01 KPGL0 KPGL0- KPGL0-01 KPGL0 KPGL0-01 KPGL0 KPGL KPGL KPGL KPGL-0 To branch the line from the female in the same direction and at 90. <> <R> KPQL KPGL KPQY0- KPGY0- KPQY0-01 KPGY0-01 KPQY0 KPGY0 KPQY0- KPGY0- KPQY0-01 KPGY0-01 KPQY0 KPGY0 KPQY0-01 KPGY0-01 KPQY0 KPGY0 KPQY KPGY KPQY KPGY KPQY KPGY KPQY-0 KPGY-0 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1

61 Series KPQ/KPG Clean One-Touch Fittings Clean One-Touch Fittings KPQU/KPGU Union Y KPQT/KPGT Union Tee To branch tubing in the same direction. KPQU KPGU KPQU0- KPQU0-01 KPQU0 KPGU0- KPGU0-01 KPGU0 <> KPQU0- KPGU0- KPQU0-01 KPGU0-01 KPQU0 KPGU0 <R> KPQU0-01 KPQU KPQU KPGU0-01 KPGU KPGU KPQU0 KPQU KPQU-0 KPGU0 KPGU KPGU-0 KPQH/KPGH Straight Union To connect tubing in the same direction. KPQL/KPGL Elbow KPQH KPGH KPQH0-00 KPQH0-00 KPQH0-00 KPQH-00 KPQH-00 To connect tubing at right angles to each other. KPGH0-00 KPGH0-00 KPGH0-00 KPGH-00 KPGH-00 KPQL KPGL KPQL0-00 KPGL0-00 KPQL0-00 KPGL0-00 KPQL0-00 KPGL0-00 KPQL-00 KPGL-00 KPQL-00 KPGL-00 To branch a tubing into 2 directions each at 90 to the original one. KPQU/KPGU Union Y To branch tubing in the same direction. KPQR/KPGR Plug In Reducer To connect to a smaller one-touch fitting. KPP Plug To plug unused one-touch fittings. Fitting size KPQT KPGT KPQT0-00 KPGT0-00 KPQT0-00 KPGT0-00 KPQT0-00 KPGT0-00 KPQT-00 KPGT-00 KPQT-00 KPGT-00 KPQU KPGU KPQU0-00 KPGU0-00 KPQU0-00 KPGU0-00 KPQU0-00 KPGU0-00 KPQU-00 KPGU-00 KPQU-00 KPGU-00 KPQR KPGR KPQR0-0 KPGR0-0 KPQR0-0 KPGR0-0 KPQR0-0 KPGR0-0 KPQR0- KPGR0- KPQR0- KPGR0- KPQR0- KPGR0- KPQR- KPGR- Fitting size KPP-0 KPP-0 KPP-0 KPP- KPP- 2

62 Nylon Tubing Series T Nylon Tubing Series T Features Suitable for piping in confined space. 20m and 0m coils colour options. /Specifications Tubing size Metric size (Series T) T025 T00 T00 T05 T00 T75 T09 T11 Tubing O.D. () 1 Tubing I.D. () Burst Pressure Characteristics and Operating Pressure Curve Black (B) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Fluid Max. operating pressure (at 20 C) Burst pressure Min. bending radius () Operating temperature Material 5 2 " 5 1 " Air/Water 1.5 MPa Refer to the burst pressure characteristics curve C to +0 C (Water: 0 to 0 C) (No freezing) Nylon How to Order T 0 25 B 20 Tubing O.D. Tubing I.D. Colour indication Symbol B W R BU Y G Colour Black White Red Blue Yellow Green Length per roll Symbol Length m roll 0m roll (Black & White only) Note) Imperial sizes also available on request. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION

63 Series TS Soft Nylon Tubing Soft Nylon Tubing Series TS Features 20m and 0m coils colour options Pliable for tighter bend radii /Specifications 20 m roll 0 m roll (TS1 is reel.) Tubing Size: Metric Size Tubing size Metric size (Series TS) TS025 TS00 TS00 TS75 TS09 TS1 Tubing O.D. () 1 Tubing I.D. () Black (B) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Fluid Max. operating pressure (at 20 C) Burst pressure Min. bending radius () Operating temperature Material 5 2 " 5 1 " Air 1.0 MPa Refer to the burst pressure characteristics curve C to +0 C (No freezing) Nylon 11, Nylon Burst Pressure Characteristics and Operating Pressure Curve How to Order TS 0 0 W 0 Tubing O.D. Tubing I.D. Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green Length per roll Symbol Length m roll 0m roll (Black & White only) Note) Imperial sizes also available on request.

64 Polyurethane Tubing Series TU Polyurethane Tubing Series TU Features Flexible Tubing sizes 2 to 1 OD For general industrial air and water applications. 20m and 0m coils. 29 colour options. Available in metric size (TU). Tubing Size: Metric Size Imperial sizes available on request. /Specifications Tubing O.D. () Tubing I.D. () 20 m roll 0 m roll (TU1 is reel.) Tubing size Metric size (Series TU) TU02 TU025 TU00 TU005 TU5 TU0 TU ø2 Polyurethane Tubing Series TU Neon green (G) Black (B) Black (B) Dark green (G) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Clear (C) Orange (YR) Extra colours 5 2 " 5 1 " White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Clear (C) Orange (YR) Solid blue (BU1) Gray (GR1) Light gray (GR2) Neon pink (P1) Solid purple (PU1) Clear purple (PU2) Solid red (R1) Clear red (R2) Silver (S1) Fluid Max. operating pressure at 20 C Air/Water 0. MPa Clear blue (BU2) Medium blue (BU) Solid yellow (Y1) Clear yellow (Y2) Burst pressure Min. bending radius () Refer to the burst pressure characteristics curve Brown (BR1) Solid green (G1) Neon yellow (Y) Clear orange (YR1) Operating temperature 20 to +0 C (Water: 0 to 0 C) (No freezing) Clear green (G2) Neon or ange (YR2) Material How to Order Polyurethane TU 0 25 BU 20 Burst Pressure Characteristics and Operating Pressure Curve Tubing O.D. Tubing I.D. Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green C Transparent YR Orange FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION Length per roll Symbol Length m roll 0m roll 5

65 Series TUS Soft Polyurethane Tubing Soft Polyurethane Tubing Series TUS Features Suitable for piping in confined space. 20m and 0m coils colour options. Tubing Size: Metric Size Series Black (B) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) O.D. I.D. Translucent (N) Yellow brown (YB) Specifications Fluid Max. operating pressure (20 C) Burst pressure fitting Min. bending radius Operating temperature Material Tubing drawing strength N (with one-touch fitting) Note 1) Without inner sleeve With inner sleeve TUS TUS00 Note 1) Not transparent but translucent owing to the material. Tubing Metric size TUS005 5 TUS5.5 20m roll 0m reel TUS0 Air 0.MPa Refer to burst pressure characteristics curve. One-touch fitting, insert fittings, hose nipple to 0 C (With no freezing) Polyurethane TUS Related Accessories Inner Sleeve Series TJ Reinforces soft polyurethane tubing connected to one-touch fitting. Insert an inner sleeve into soft polyurethane tubing. tubing model TJ5 TUS025 TJ-00 TUS00 TJ-005 TUS005 TJ-5 TUS5 TJ-0 TUS0 Length How to Order TUS 5 B 0 Tubing O.D. Tubing I.D. Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green N Translucent YB Yellow brown Length per roll Symbol Length m roll 0m roll (Black & blue only) Burst Pressure Characteristics and Operating Pressure Curve

66 Wear Resistant Tubing Series TUZ Soft Polyurethane Tubing Series TUS Features Made of special polyurethane. Sliding motion abration reduction to aprox. 1/ of the TU Series. Flexible tubing sizes to OD. Colour variations Tubing O.D. () Tubing I.D. () TUZ TUZ00 TUZ005 5 TUZ m roll 0 m roll TUZ0 Black (B) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Specifications Fluid Air One-touch fittings KQ/KJ series, fittings Insert fittings KF series, Stainless steel 1 insert fittings KFG series, Miniature fittings M/MS series (hose nipple type) Max. operating 20C 0. MPa pressure 0C 0. MPa Burst pressure Refer to the burst pressure characteristics curve. Min. bending radius () Operating temperature 20 to +0C Material Special polyurethane Note 1) The minimum bending radius means the value measured by the method shown in the figure at the right at the temperature of 20C when the tube is bent. The minimum bending radius assumes static piping. If the tube is used in a moving part, provide extra length to the tube. Check the bending radius recoended by the flexible protection tube manufacturer to assure that the tube is used in the flexible protection tube. Note 2) Not clear, but opaque due to material. Pressure (MPa) Burst Pressure Characteristics Curve and Operating Pressure.0.0 Burst pressure Maximum operating pressure Temperature (C) How to Order TUZ025 TUZ00 TUZ005 TUZ5 TUZ0 TUZ025 BU 20 Tubing model O.D. x I.D. () x 2.5 x x 5 x.5 x Symbol B W R BU Y G Colour Colour Black White Red Blue Yellow Green Length per roll Symbol 20 0 Length 20 m roll 0 m roll FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 7

67 Series TUH Hard Polyurethane Tubing Hard Polyurethane Tubing Series TUH Features 2 variants, high pressure and standard. Standard type High pressure type colour choices. Smaller bending radii than nylon tubing. Improved maximum operating pressures above 0 C compared to standard polyurethane. Series Standard High pressure O.D. I.D. O.D. I.D. Black (B) Opal (W) Blue (BU) Translucent (N) Specifications Fluid Max. operating Standard type pressure (20 C) High pressure type Min. bending Standard type radius High pressure type Burst pressure Operating temperature Material TUH02 2. TUH TUH0. TUH00 Tubing Metric size TUH05 5. TUH005 5 Note 1) Air Note 2) 0.MPa Note 2) 1.0MPa TUH7 7. TUH5.5 Note 1) Consult SMC regarding other fluids. Water cannot be used because of occurrence of hydrolysis. Note 2) The maximum operating pressure is the value at 20 C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst. Note ) The minimum bending radius is measured at 20 C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius. Tubing Size: Metric Size 20m roll 0m TUH. TUH Refer to burst pressure characteristics curve. 20 to 0 C Polyurethane Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa Burst pressure MPa Max. operating pressure Operating temperature C Standard type High pressure type Max. operating pressure Operating temperature C How to Order TUH 0 0 B 20 Tubing O.D. Tubing I.D. Length per roll Symbol Length 20 0 Colour indication Symbol B W BU N Colour Black White Blue Translucent 20m roll 0m roll

68 Polyurethane Coil Tubing Series TCU Polyurethane Coil Tubing Series TCU Features Single or multi-core option. For flexible piping applications. For compact piping. Specifications Tubing Size: Metric Size Number of cores Tubing O.D. Tubing I.D. Fluid Max. operating pressure (20 C) Burst pressure Operating temperature Material colour Coil Tubing O.D. I.D Note 2) TCU 025B-1 1 colour Black (B) Black (B) Black (B) Black (B) Black (B) Black (B) Black (B) TCU 025B Number of rolls Max. operating length m TCU 025B- TCU 00B-1 1 Air Note 1) 0.MPa Refer to burst pressure characteristics curve. 20 to 0 C Polyurethane Black TCU 00B-2 2 TCU 00B- TCU 005B-1 Note 1) Consult SMC regarding other fluids. Note 2) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. 1 5 TCU025B-1 TCU025B-2 TCU025B- TCU00B-1 TCU00B-2 TCU00B- TCU005B-1 Burst Pressure Characteristics and Operating Pressure Curve FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 9

69 Series TFU Polyurethane Flat Tubing Polyurethane Flat Tubing Series TFU Features 2 or core flat tubing for neat presentation. For flexible piping applications. For compact piping. Specifications Number of cores Tubing O.D. Tubing I.D Fluid Air Note 1) Max. operating pressure (20 C) 0. MPa Burst pressure Refer to burst pressure characteristics curve. Operating temperature 20 to 0 C (With no condensation) Material Polyurethane Colour Black Min. bending radius Tubing length per roll (m) Note 1) Consult SMC regarding other fluids. Avoid abnormal temperature rises due to adiabatic compression. m Roll TFU 025B-2 TFU 025B- TFU 00B-2 TFU 00B- O.D. I.D. Colour (Colour symbol) Number of rolls 2.5 Black (B) 2 Black (B) Black (B) 2 Black (B) 5 Black (B) 2 Black (B) TFU 005B-2 Tubing Size: Metric Size TFU 005B- TFU025B-2 TFU025B- TFU00B-2 TFU00B- TFU005B-2 TFU005B- How to Order TFU 0 25 B 2 Tubing O.D. Tubing I.D. Colour indication Symbol Colour B Black Number of cores Symbol Number of cores

70 FR Soft Nylon Coil Tubing Series TRS Flame Resistant Soft Nylon Tubing Series TRS Features Flame resistant tubing(equivalent to UL-9 Standards V-0). to general pneumatic and water piping in a spark atmosphere such as in spot welding. Tubing Size: Metric Size Series O.D. I.D. TRS00 TRS005 5 Tubing Metric size TRS5.5 20m roll 0m on reel TRS0 Burst Pressure Characteristics and Operating Pressure Curve Black (B) White (W) Red (R) Blue (BU) Green (G) Specifications Fluid Max. operating pressure (20 C) Burst pressure Air, Water 1.2MPa Refer to burst pressure characteristics curve. Min. bending radius Operating temperature Material 20 to 0 C, Water: 0 to 0 C (With no condensation) Flame resistant nylon (Equivalent to UL-9 Standards V-0) How to Order TRS 5 B 0 Tubing O.D. Tubing I.D. Colour indication Symbol Colour B Black W White R Red BU Blue G Green Length per roll Symbol Length m roll 0m on reel FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 11

71 Series TRB FR Double Layer Tubing Flame Resistant Double Layer Tubing Series TRB Features Flame resistant (equivalent to UL-9 Standards V-0) to general pneumatic and water piping in a spark atmosphere such as in spot welding. Double layer design using flame resistant resin (equivalent to UL-9 Standard V-0) for outer layer. Tubing Size: Metric Size Series Inner Inner tubing I.D. Outer layer thickness Black (B) Note 1) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Outer layer colour Specifications Fluid Max. operating pressure (20 C) Burst pressure Min. bending radius Operating temperature Inner tubing Material Outer layer How to Order TRB00 1 Note ) TRB00 1 Tubing Metric size TRB 75 B 0 TRB m roll 0m on reel TRB Air, Water Note 2) 1.0MPa Refer to burst pressure characteristics curve to 0 C, Water: 0 to 0 C (With no condensation) Nylon 11 PVC (Equivalent to V-0 in UL-9 Standards) Note 1) The inner tubing are all black. Note 2) to general industrial water. Consult SMC for use of other types of fluids. Keep the surge pressure below the maximum operating temperature. Note ) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Burst Pressure Characteristics and Operating Pressure Curve FR double layer tubing (Sectional view) Related Accessories Tool to peel off outer layer tubing. Inner tubing Soft Nylon Outer layer Tubing Cutter Series TKS Tubing O.D. Tubing I.D. Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green Length per roll Symbol Length m roll 0m on reel

72 FR Double Layer Polyurethane Tubing Series TRBU Flame Resistant Double Layer Polyurethane Tubing Series TRBU Features Flame resistant (equivalent to UL-9 Standards V-0) to general pneumatic and water piping in a spark atmosphere such as in spot welding. Double layer design using flame resistant resin (equivalent to UL-9 Standard V-0) for outer layer. Inner tubing material: Polyurethane Tubing Size: Metric Size Series Inner Inner tubing I.D. Outer layer thickness Black (B) Note 1) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Outer layer colour Specifications Fluid Max. operating pressure (20 C) Burst pressure Min. bending radius Note ) Operating temperature Inner tubing Material Outer layer How to Order TRBU00 1 Note ) TRBU Tubing Metric size TRBU 5 B 0 TRBU m roll 0m on reel TRBU0 1 Air, Water Note 2) 0.MPa Refer to burst pressure characteristics curve to 0 C, Water: 0 to 0 C (With no condensation) Polyurethane Polyolefin resin (Equivalent to V-0 in UL-9 Standards) Note 1) The inner tubing are all black. Note 2) to general industrial water. Consult SMC for use of other types of fluids. Keep the surge pressure below the maximum operating temperature. Note ) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note ) The value at a temperature of 20 C. Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa Burst pressure Max. operating pressure Operating temperature C FR double layer polyurethane tubing (Sectional view) Related Accessories 0 0 Tool to peel off outer layer tubing. Inner tubing Polyurethane Outer layer Tubing Cutter Series TKS Tubing O.D. Tubing I.D. Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green Length per roll Symbol Length m roll 0m on reel FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1

73 Series TAU Antistatic Polyurethane Coil Tubing Antistatic Polyurethane Tubing Series TAU Features For pneumatic piping system requiring anti static measures. Flexible tubing Tubing Size: Metric Size Series O.D. I.D. TAU220 2 TAU TAU00 Tubing Metric size TAU m roll 0m on reel TAU5.5 TAU0 Burst Pressure Characteristics and Operating Pressure Curve Black (B) Specifications Max. operating pressure (20 C) Burst pressure Min. bending radius Operating temperature Material Surface resistance Note 1) Note 2) TAU 5 B 0 Refer to burst pressure characteristics curve to 0 C Conductive polyurethane to 7 Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note 2) The value at a temperature of 20 C. How to Order 0.9MPa Tubing O.D. Tubing I.D. Length per roll Symbol Length m roll 0m on reel Colour indication Symbol Colour B Black 1

74 Antistatic Soft Polyurethane Tubing Series TAS Features For pneumatic piping system requiring anti static measures. Flame resistant tubing (Equivalent to UL-9 Standards V-0) Antistatic Soft Polyurethane Coil Tubing Series TAS Series O.D. I.D. TAS TAS TAS00 Tubing Metric size 20m roll 0m on reel TAS005 5 TAS5.5 TAS0 Burst Pressure Characteristics and Operating Pressure Curve Black (B) Specifications Max. operating pressure (20 C) Burst pressure Min. bending radius Operating temperature Material Surface resistance Note 1) Note 2) TAS 5 B 0 Refer to burst pressure characteristics curve to 0 C Conductive polyurethane + flame resistant nylon (equivalent to UL-9 standards V-0) to 7 Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note 2) The value at a temperature of 20 C, with a % or less O.D. variable rate. How to Order 1.2MPa Tubing O.D. Tubing I.D. Length per roll Symbol Length m roll 0m on reel Colour indication Symbol Colour B Black 20m Roll 0m on Reel O.D. I.D. Colour (Colour symbol) O.D. I.D. Colour (Colour symbol) Black (B) Black (B) Black (B) Black (B) Black (B) Black (B) TAS222B-20 TAS025B-20 TAS00B-20 TAS005B-20 TAS5B-20 TAS0B Black (B) Black (B) Black (B) Black (B) Black (B) Black (B) TAS222B-0 TAS025B-0 TAS00B-0 TAS005B-0 TAS5B-0 TAS0B-0 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 15

75 Series TH FEP Tubing (Fluoropolymer) FEP (Fluoropolymer) Tubing Series TH Features Heat resistance: 200 C Colour variations General pneumatic piping applications (Food, Semiconductor, Medical care and Automotive) Tubing Size: Metric Size Series Tubing O.D. () Tubing I.D. () -20m roll -0m roll Metric size TH002 TH025 TH00 TH00 TH75 TH0 TH09 TH How to measure the minimum bending radius. F ixed end Color Translucent Red (Translucent) Blue (Translucent) Black (Opaque) Symbol N R BU B Specifications Fluid fittings Note ) Note 2) Inch nominal size 5/2" Inch nominal size 5/1" Air, Water Note 1), Inert gas One-touch fittings: Series KQ, KJ Insert fittings: Series KF Fluoropolymer fittings: Series LQ Miniature fittings: Series M, MS (Hose nipple type) Max. operating pressure Refer to below Max. Operating Pressure. Min. bending Note ) radius () Note ) Operating temperature Air, Inert gas: -20 to 200 C (No freezing) Material FEP (Fluorinated Ethylene Propylene Resin) Note 1) When using a fluid in liquid form, the surge pressure must not exceed the maximum operating pressure. A surge pressure higher than the maximum operating pressure can cause breakage of the fittings, or rupture of the tubing. Furthermore, an abnormal temperature increase due to adiabatic compression can also result in ruptured tubing. Note 2) Do not use in locations where the FEP tubing will move. Be sure to operate under the maximum operating pressure conditions using the lower maximum operating specification of either the tubing or fittings. After long term use or under high temperatures, some fittings leakage may occur due to material deterioration with age. Perform periodic inspections, and if any leakage is detected, replace with a new product iediately. For High Purity Fluoropolymer, refer to the precautions of CAT.ES70-, "High Purity Fluoropolymer Fittings & Tubing." Note ) Minimum bending radius is measured as shown left as representative values. Allow extra length when piping since the tubing may crush if bent more than the min. bending radius. Note ) Consult SMC if using any other fluids. 2R At a temperature of 20 C, bend the tubing into a U shape. Fix one end and gradually move the other end closer. Measure 2R at the point where the outside diameter's rate of change is 5%. MP a Operating P ressure Max. Max. Operating Pressure TH002 TH025 TH00 TH0/TH TH00/TH75/TH Operating Temperature C Note) The maximum operating pressure varies dependant on the I.D. bore size even if the O.D. is the same. How to Order Metric size TH00 N 20 Indication of tubing model Symbol N R BU B Colour indication Colour Translucent Red (Translucent) Blue (Translucent) Black (Opaque) Length per roll Symbol Roll size 20 20m roll 0 0m roll 1

76 Soft Fluoropolymer Tubing Series TD Soft Fluoropolymer Tubing Series TD Features Flexibility: Approx. 20% improved. Material: Denatured PTFE Operating temperature max. 20 C. Conforms to Food Sanitation Law. Tubing Size: Metric Size /Specifications Max. operating pressure (MPa) Maximum Operating Pressure Bend the tube into the U-form at a temperature of 20 C. Fix one end and close loop gradually. Measure 2R when the deformed ratio of the tube diameter at bending reaches 5%. TD025 How to measure the minimum bending radius Fixed end TD00 2R TD00/TD75/TD Operating temperature ( C) Size Tubing O.D. () Tubing I.D. () Roll Color Fluid Note 1) fittings Note 2) Max. operating pressure (MPa) Min. bending radius () Note ) m 20 m 20 C 0 C 200 C 20 C Recoended radius Refraction value Max. operating temperature (fixed usage) Material TD Translucent (material colour) Air, Water, Inert gas Insert fitting KF series Stainless steel 1 insert fitting KFG series Miniature fittings M, MS series (Hose nipple type) Fluoropolymer fitting LQ2 series TD Metric size TD TD TD C Denatured PTFE (Polytetrafluoroethylene resin) Note 1) When using a liquid fluid, the surge pressure must be under the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes. Furthermore, abnormal temperature rise caused by adiabatic compression may result in the tube bursting. Note 2) Do not use this product in a manner in which the tube is not fixed. Observe the lesser value of the maximum operating pressure between the tube and fitting. A material change over a long duration or due to high-temperature may cause leakage. Perform periodic maintenance and replace with a new product iediately when abnormalities are detected. Refer to the Maintenance precautions in the TD/TID tubing. For other precautions, see the precautions in the Best Pneumatics catalogue". When using the fluoropolymer fittings, please refer to the precautions in the relevant catalogue CAT. ES70-. Note ) The minimum bending radius is the representative value measured as shown below. Use a tube above the recoended minimum bending radius. The tube may be bent if used under the recoended minimum bending radius. Therefore, refer to the refraction value and make sure that the tube is not bent or flattened. Please note that the refraction value is not warranted because of the value when 2R is measured by the method shown above on the left if the tube is bent or flattened, etc. How to Order Metric size TD025 Length per roll Symbol Length m roll m roll Tubing model FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION

77 Series TL High Purity Fluoropolymer Tubing High Purity Fluoropolymer Tubing Series TL Features Outstanding corrosion resistance. Compatable with max fluid temperature up to 200 C. High purity and low particulate generation. Series/Specifications Metric sizes (Series TL) TL00 TL00 TL0 TL TL191 ø x ø ø x ø ø x ø ø x ø ø19 x ø Tubing model TL00 Nominal diameter Tubing size ø x ø O.D. Basic diameter () Tolerance Thickness Basic diameter 0.5 () Tolerance m 20 m Bundle 50 m 0 m 50 Ft. (1 m) 0 Ft. ( m) Straight pipe 2 m Colour Translucent (colour of material) fluid Please refer to the applicable fluid chart. Note 1) Max. operating pressure (at 20 C) 1 MPa 0.9MPa 0.7 MPa Burst pressure (at 20 C) Min. bending radius () Max. operating temperature (Fixed use) Material Note 2).9 MPa.9 MPa.7 MPa.MPa 2.9 MPa 2. MPa C Super PFA MPa Note 1) The maximum operating pressure is the value at 20 C. For other temperatures, calculate from the burst pressure drop coefficient. Furthermore, an abnormal temperature increase due to adiabatic compression can cause tubing to burst. To operate at a temperature other than 20 C, the operating pressure must be no more than the value calculated using the equation below: When the value (calculated using the formula below) exceeds 1 MPa, the Max. operating pressure is 1 MPa. (Max. operating pressure) = 1/ x (burst pressure drop coefficient) x (burst pressure at 20 C) When using a fluid in liquid form, the surge pressure must be no more than the maximum operating pressure. A surge pressure higher than the maximum operating pressure can cause breakage of the fitting or bursting of the tubing. Note 2) The minimum bending radius is measured using the method shown in the figure at the right. Note ) It is connectable with LQ Series (/"size). As for other coercial items, there are some cases it is not able to connect due to tolerance of dimensions. Fixed side 2R At a temperature of 20 C bend the tubing into a U shape. Then with one side fixed, gradually close the other side and measure 2R at the point where the tubing folds or flattens, etc. How to Order Metric sizes Tubing Eluting fluorine ion amount TL00 20 Note ) Note ) (ng/g) Eluting metal ion amount (ng/cm 2 ) Type Fluorine ion Type Al Fe Ni Na Ca Eluting amount 0.1 or less Eluting amount Length Symbol S to both metric and inch size Type Length m 20 m Roll 50 m 0 m Straight 2 m A 15 g piece of fluororesin tubing is cut off, washed in deionized water and iersed in 15 ml of 25% methyl alcohol extract at room temperature for 2 hours. Then the extract is diluted with deionized water to be subjected to a quantitative analysis of fluorine ions. The interior of the fluororesin tubing is washed with super deionized water. Approximately 20g of super high purity hydrofluoric acid (%) is measured and injected into the tubing. The interior wall of the tubing is iersed at normal temperature for one week with both ends of the tubing plugged. Then the extract was diluted with super deionized water to be subjected to a quantitative analysis on Al, Fe, Ni, Na and Ca by the stripping method. 1

78 High Purity Fluoropolymer Tubing Series TL Material and fluid compatibility check list for high purity fluoropolymer fittings Chemical Compatibility Burst pressure drop curve 1.0 Acetic acid Acetone Aonium fluoride Aonium hydroxide Butyl acetate 0% 0% 0% 0% 0% Note 1) Burst pressure drop coefficient Methylne chloride 0% Hydrochloric acid % Temperature C Hydrofluoric acid 50% Hydrogen peroxide 0% Methanol 0% Methyl ethyl Ketone Nitric acid Phosphoric acid Caustic potash Sulfuric acid Toluene Xylene Sodium hydroxide 70% % 5% 0% 0% Note 1) Trichloroethane 0% Rhosphorus pentachloride Isobutyl alcohol Note 1) Isopropyl alcohol Ozone Ethyl acetate Deionized water Nitrogen Ultrapure water Note 1) Note 1) The material and fluid compatibility check list provides reference values as a guide only. Note 1) Since static electricity may be generated, implement suitable countermeasures. Compatibility is indicated for fluid temperatures of 200 C or less. The material and fluid compatibility check list provides reference values as a guide only, therefore we do not guarantee the application to our product. The data above is based on the information presented by the material manufacturers. SMC is not responsible for its accuracy and any damage happened because of this data. Tmah Table symbol can be used. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 19

79 Series TPH Clean Tubing: Polyolefin Tubing Clean Tubing: Polyolefin Tubing Series TPH Features Suitable for clean room blowing systems. colour options. Clean tubing. Tubing Size: Metric Size Series O.D. I.D. White (W) Black (B) Red (R) Blue (BU) Yellow (Y) Green (G) Specifications Fluid Max. operating pressure (20 C) Min. bending radius Burst pressure Operating temperature Material Note 2) TPH TPH00 Tubing Metric size TPH00 TPH m roll 0m roll TPH09 9 Air, Nitrogen gas, Water (Pure water) Note 1) 1.0MPa 0.7MPa Refer to burst pressure characteristics curve. 20 to 0 C, Water: 5 to 0 C Polyolefine resin Note 1) Contact SMC regarding other fluids. Note 2) The maximum operating pressure is the value at 20 C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst. Note ) The minimum bending radius is measured at 20 C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius. Caution Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease. Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa 5 Burst pressure TPH00,TPH75,TPH09 Burst pressure TPH025,TPH00 2 Max. operating pressure (TPH025,TPH00) 1 Max. operating pressure (TPH00,TPH75,TPH09) Operating temperature C How to Order TPH 0 0 B 20 Tubing O.D. Tubing I.D. Length per roll Symbol Length m roll 0m roll Colour indication Symbol B W R BU Y G Colour Black White Red Blue Yellow Green 190

80 Clean Tubing: Soft Polyolefin Tubing Series TPS Features Suitable for clean room blowing systems. colour options. Clean tubing. Clean Tubing: Soft Polyolefin Tubing Series TPS Pliable for tight bend radii Tubing Size: Metric Size Series O.D. I.D. White (W) Black (B) Red (R) Blue (BU) Yellow (Y) Green (G) Specifications Fluid Max. operating pressure (20 C) Min. bending radius Burst pressure Operating temperature Material Note 2) TPS TPS00 Tubing Metric size TPS005 5 TPS5.5 20m roll 0m roll TPS0 Air, Nitrogen gas, Water (Pure water) Note 1) 0.7MPa Refer to burst pressure characteristics curve. 20 to 0 C, Water: 5 to 0 C Polyolefine resin Note 1) Contact SMC regarding other fluids. Note 2) The maximum operating pressure is the value at 20 C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst. Note ) The minimum bending radius is measured at 20 C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius. Caution Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease. Burst Pressure Characteristics and Operating Pressure Curve Burst pressure MPa 5 2 Burst pressure 1 Max. operating pressure Operating temperature C How to Order TPS 0 0 B 20 Tubing O.D. Tubing I.D. Length per roll Symbol Length m roll 0m roll Colour indication Symbol Colour B Black W White R Red BU Blue Y Yellow G Green FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 191

81 Series TB/TBR/TK Tubing Related Equipment Tubing Stand & Reels Series TB/TBR Features Compact size with a small footprint. Tubing reel Tubing stand Installation can be easily completed by putting the tubing reels on the stand. 00 Easy replacement of tubing One-touch snap fit operation Locked Unlock condition Movement is easy with attached casters. A reel support is provided, which can be moved according to the number of reels. Tubing Reels tubing size, TBR-1 TBR-2 TBR- TBR- Tubing Stand: TB-2 Series TK Tubing Cutter Note) Do not use the cutter to cut metal such as wires. TK-1 : 1 or less TK-2 : 1 or less TK- (Simple type) : or less 192

82 Multiple Tubing Holder Series TM Features Tubing Related Equipment Series TM/TG/TKS Can be separated at any position depending on the number of tubing. Adopts flame resistant resin (Equivalent to UL-9 Standards V-0). TM-0 TM-0 TM-0 TM- TM- Number of tubing (MAX.) Accessory: Phillips countersunk tapping screw Size: nominal size X length Number of pieces 2 X 2. X X How to Use Caution q The multiple tubing holder can be cut apart according to the number of tubing to be connected. <Cutting method> Align the cutter with the cutting groove and cut the holder. w Cut the multiple tubing holder at a desired position and mount it on the equipment with the attached phillips countersunk tapping screws. e Align the tube with the holding position and push down to fit it into the holding part. r Pull up a tubing to remove it from the holder. Tubing Release Tool Series TG To remove tubing in a confined space or from manifolded one-touch fittings. tubing size tubing material Handle colour Weight TG-1 ø, ø Nylon, Soft nylon, Polyurethane Blue g Double Layer Tubing Stripper Series TKS Double Layer Tubing Stripper The outer layer of double layer tubing is peeled off easily. Variations TKS-0 TKS-0 TKS- TKS- Tip colour Orange Yellow Blue Green tubing* TRB00, TRBU00 TRB00, TRBU005 TRB75, TRBU5 TRB09, TRBU0 * Inner tubing material/trb: soft nylon, TRBU: polyurethane FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 19

83 Series MQR Rotary Joint Low Torque Metal Seal Type Rotary Joint Series MQR Features Start-up torque unaffected by supply pressure and temperature fluctuations. 1 circuit, 2 circuits, circuits, circuits, circuits, 1 circuits Use of metal seals prevents the spool from sticking to the rotating surface even after a long period of non-operation. Operating pressure - 0kPa - 1MPa. Piping ports are aligned in a spiral line for easy piping. Specifications MQR1- MQR2- MQR- MQR- MQR- Number of circuits (Number of ports) 1 2 Fluid Air / Inert gas Seal structure Metal seal Guide structure Bearing supported Bearing supported at both ends Port size Male Female Flow rate characteristics Lubrication Min. operating pressure Max. operating pressure C[dm /(s. bar)] b Cv Not required 0kPa 1.0MPa Ambient temperature and operating fluid to 0 C temperature Note 1) Max. start-up rotation torque Note 2) 0.00 N m or less 0.0 N m or less 0.05 N m or less 0. N m or less 0.20 N m or less Allowable rotation number 000 min -1 (r.p.m.) or less Note ) 2000 min -1 (r.p.m.) or less 1500 min -1 (r.p.m.) or less 900 min -1 (r.p.m.) or less 00 min -1 (r.p.m.) or less Allowable radial load (allowable coupling axis reaction) Note ) 1N or less 15N or less 0N or less 0N or less 50N or less Allowable axial load Weight 0.025kg 0.1kg 0.9kg 0.7kg 1.2kg Note 1) The temperature 0 C includes temperature rise during rotation. Note 2) The rotational torque does not change with the supply pressure or with non-use (remains within allowable torque), but it does change with the rotational speed. Note ) If using at a speed above 00 min -1 (r.p.m.), ensure rotation is in the direction in which the joint is fastened. Note ) Rubber / resin couplings are recoended due to their excellent absorption of off center, shocks, and vibrations. MQR N m or less 200 min -1 (r.p.m.) or less 50N or less 2.0kg How to Order MQR F Low torque rotary joint (Metal seal type) Options Nil Standard F Note) Flange Note: No flange type in 1 circuit system Options/Mounting Bracket Number of circuits Flange part number 2 circuits MQR2-F circuits MQR-F circuits MQR-F circuits MQR-F 1 circuits MQR1-F Connection diameter Number of circuits 1 1 circuit 2 2 circuits circuits circuits circuits 1 1 circuits Construction Ball bearing Spool (Metal seal) Sleeve (Metal seal) Body Adapter plate 19

84 Rotary Joint Series MQR Dimensions: Standard Type/Flange Type Symbol indicates flange dimensions MQR1- MQR2- () ø1 ø M length P.C.D.29 - ø counter bore depth 1.5 ø5h ( from end) ø15h 2.2 () () 50 Width across flats: 7 Width across flats: ø15h 5 ø depth 5 29 M length MQR- 2-M length P.C.D..2 x = 2. P = øh ( from end) 1 1 (1.2) (ø) ø20h 5 º ø20h 2 (55) ø counter bore depth 1.5 MQR- 0.0 ±.5 2-M length P.C.D.29 0 ø25h P ø9h ( from end) Flange: MQR2-F (for MQRF2-) -ø.5 mounting hole 2-M length P.C.D. 1- ø counter bore depth P 5 º 22.5 length ± M length P.C.D Flange: MQR-F (for MQRF - ) M length ø depth -M length P.C.D. ø depth -ø.5 mounting hole 1 ø25h Flange: MQR-F (for MQRF - ) 50 -ø.5 mounting hole FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 195

85 Series MQR Rotary Joint Dimensions: Standard Type/Flange Type Symbol indicates flange dimensions MQR x ø counter bore depth1.5 5º º ø5h ( from end) 0 ø0h M length P.C.D. P =0º MQR1-1- ø counter bore 1.5 -M length P.C.D.5 1- ø1.5 counter bore øh ( from end) ø5h 7 P = = x =.2 P =.2 x P = M length ø.1 depth ø0h () ± M length P.C.D. Flange: MQR-F (for MQRF-) -ø counter bore 5.5 ø.5 mounting hole (ø19) ø0h M length ø5.1 ±0.05 depth ±0.0 -M length P.C.D.5 5 Flange: MQR1-F (for MQRF1-) ø counter bore 5.5 ø.5 mounting hole 19

86 Blow Gun Series VMG Blow Gun Series VMG Features Special valve design and construction saves energy. Choice of bottom or top piping. Selection of nozzles can be added (see KN section). Threaded or one-touch connection. Typical pressure loss is less than 1%. Effective sectional area 0². (Without Nozzle) Bottom Piping Provides constant trigger force irrespective of the supply pressure. Top Piping Specifications Fluid Operating pressure range Proof pressure Ambient and fluid temperature Effective area Port size Piping entry Nozzle port size Weight Operational force (when the valve is fully open) How to Order VMG 1 Air 0 to 1.0MPa 1.5MPa 5 to 0 C (With no freezing) 0 2 (without nozzle) 1/, / Bottom Top Rc1/ 10g 7N W F0 01 Blow gun Standard type Series 1 Resin body lever type Piping entry 1 Bottom 2 Top W BU Body colour Urban white Dark blue Nozzle Nil Type Male nozzle High efficiency nozzle Low noise nozzle with male Note 1) Copper extension nozzle Length 00 Length 00 Nozzle model Without nozzle KN-R02-0 KN-R KN-R KN-R KNH-R02-0 KNH-R KNH-R KNS-R KNS-R KNS-R02-0- KNS-R02-1- KNL KNL KNL KNL Nozzle size ø1 ø1.5 ø2 ø2.5 ø1 ø1.5 ø2 ø0.75 x ø0.9 x ø1 x ø1.1 x ø1.5 ø2 ø1.5 ø2 Note 1) One piece of H0 self-align fitting is attached. When a copper extension nozzle is ordered separately, a self-align fitting will also be required for connection. Order one with the above part number in addition to the nozzle. FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION Connection size Piping connection system F02 Screw-in type F0 11 With S coupler plug Size and part no. 1/ Port size / Plug part no. KKPMS 197

87 Series VMG Blow Gun Provides constant operational force irrespective of the supply pressure Operational force Small Large Conventional product Blow Gun VMG Supply pressure (MPa) Pressure loss Pressure loss (MPa) Male nozzle ø MPa pressure loss at 0.5 MPa Supply pressure (MPa) Dimensions VMG11/Piping entry: Bottom Nozzle 1/ 15 2 Width across flats22 2 A 1.5 1/, / VMG/Piping entry: Top Width across flats 22 1/, / S coupler plug mounting Note 1) Note 1) 0 1/ Nozzle S coupler plug mounting Type Male nozzle High efficiency nozzle A Nozzle model KN-R02-0 KN-R KN-R KN-R KNH-R02-0 KNH-R KNH-R Nozzle size ø1 ø1.5 ø2 ø2.5 ø1 ø1.5 ø A Note 1) Type Low noise nozzle with male Copper extension nozzle (with self align fitting H0) Nozzle model KNS-R KNS-R KNS-R02-0- KNS-R02-1- KNL KNL KNL KNL Nozzle size ø0.75 x ø0.9 x ø1 x ø1.1 x ø1.5 ø2 ø1.5 ø2 A Note 1) Note 1) Reference dimensions after installation 0 19

88 Nozzles for Blowing Series KN Nozzles for Blowing Series KN Features Nozzle system for air blowing and back pressure sensing. Complete range of delivery nozzles with different fittings. Lower air consumption for dramatic cost savings in use. Deliver a controlled amount of air where needed. Consistent performance for assured results. Easier to set up than improvised nozzles and jets. Specifications Nozzle (KN, KNK, KNH, KNS, KNL) tubing material piping O.D. Fluid Max. operating pressure Ambient and fluid temperature Mounting Threads Nut Seal for R s Nozzle with self-align fitting/kn Nylon, Soft nylon, Flexible copper pipe (C20T), OST pipe ø, ø, ø, ø, ø, ø1, ø20 Air, Coolant 1.0MPa (0.MPa with SGP pipe) -5 to 0 C (with no freezing) JISB020 (taper s for piping) JISB0211, class 2 (taper s for piping) None KN-0-0 KN KN-0-0 KN KN KN KN KN--250 KN--00 KN--50 KN--00 KN--00 KN--50 KN--00 KN--00 KN-1-00 KN-1-00 KN KN Nozzle size D ø1 ø1.5 ø1 ø1.5 ø2 ø1.5 ø2 ø2.5 ø ø.5 ø ø ø.5 ø ø ø ø ø ø Connection size ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø ø1 ø1 ø20 ø20 Width across flats H H Sensing head (KNP) fitting size Fluid Max. operating pressure (at 20 C) Ambient and fluid temperature L 1 L ø Air 0.MPa -5 to 0 C (with no freezing) () ød H1 H2 L2 L1 Nozzle with male /KN KN-R01-0 KN-R KN-R02-0 KN-R KN-R KN-R KN-R02-00 KN-R0-00 KN-R0-00 KN-R0-00 KN-R0-00 KN-R0-00 KN-R0-00 Nozzle size D ø1 ø1.5 ø1 ø1.5 ø2 ø2.5 ø ø ø ø ø ø ø ø KN-R-00 FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION Connection size R/ R/ R1 Width across flats H L A Connection ød H1 A L1 () 199

89 Series KN Nozzles for Blowing Copper extension nozzle/knl () KNL KNL KNL KNL KNL--250 KNL--00 KNL KNL KNL KNL KNL--250 KNL--00 Nozzle size D ø1.5 ø2 ø2 ø2.5 ø2.5 ø ø1.5 ø2 ø2 ø2.5 ø2.5 ø Outside diameter L 1 ø ø ø ø ø ø ø ø ø ø ø ø Self-align fitting (For copper extension nozzle connection) ød L1 O.D. Half union eg: H0 High efficiency nozzle:knh The air blow thrust is improved by %. KNH-R02-0 KNH-R KNH-R Low noise nozzle with male : KNS KNS-R KNS-R KNS-R02-0- KNS-R02-1- Nozzle for One-touch fitting/kn Note) only for use with SMC KQ fittings. KN-Q0-0 KN-Q0-150 KN-Q0-200 KN-Q0-150 KN-Q0-200 KN-Q-200 KN-Q-250 KN-Q-250 KN-Q-00 Nozzle size D ø1 ø1.5 ø2 Nozzle size D ø0.75 x ø0.9 x ø1 x ø1.1 x Nozzle size D ø1 ø1.5 ø2 ø1.5 ø2 ø2 ø2.5 ø2.5 ø Connection R 1/ R 1/ R 1/ Connection size R 1/ R 1/ R 1/ R 1/ Connection size ø ø ø ø ø ø ø ø ø Width across flats H Width across flats H L L L A A A ød H1 ød Connection 2 A L1 A H1 A L1 L1 () ød () Connection () Pivoting nozzle with self-align fitting/knk Nozzle size D KNK--00 ø KNK--00 ø KNK--00 ø KNK--00 ø KNK-1-00 ø KNK-1-00 ø KNK ø KNK ø Connection size ø ø ø ø ø1 ø1 ø20 ø20 Width across flats H1 H L 1 L ød.5 L1 H2 L2 () 1500

90 Nozzles for Blowing Series KN Pivoting nozzle with male /KNK KNK-R02-00 KNK-R02-00 KNK-R0-00 KNK-R0-00 KNK-R0-00 KNK-R0-00 Nozzle size D ø ø ø ø ø ø Connection size Width across flats H1 H L A ød H1 Connection H2.5 A L1 () Low noise nozzle with self-align fitting/kns KNS KNS-0-0- KNS KNS KNS--0- Nozzle size D ø0.75 x ø1 x ø0.75 x ø0.9 x ø1 x Connection size ø ø ø ø ø Width across flats H H2 1 1 L 1 L ød H1 2 L1 L2 H2 () Sensing Heads Standard sensing head Nozzle size D Connection size L 1 L 2 H1 H2 KNP-1 ø2.5 ø ød L1 L2 () Needle sensing head Nozzle size D Connection size L 1 L 2 H1 KNP-2 ø0.7 ø A L 2 ød H1 H2 Polyurethane tubing () A L2 L L1 Polyurethane tubing Cassette size FOR MORE DETAILS SEE OUR SPECIFIC CATALOGUES, PRODUCTS CD s OR ONLINE INFORMATION 1501