Tube Applicable for nylon, soft nylon and polyurethane tubing.

Transcription

1 Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening torque Tight seal Hose nipple Tube pplicable for, soft and. ap nut ertainly hold the tube by manual clamping Easy removal of tube by loosening With electroless nickel plated arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated arb fitting Tube Low tightening torque Tight seal PT. ompact piping space Hose nipple /dis is simple while keeping a large retaining force. Line up various styles For air in confined areas. ccepts many styles of plastic Hose nipple and hose elbow accepts, soft,. 142 Made to Order (Refer to page 14 for details.) Specifications pplicable material pplicable O.D. / I.D. Fluid Max. operating pressure (at 20 ) mbient and fluid temperature onnection size Thread Principal Parts Material Material M, ody Nylon Soft (1) ø4/ø Polyurethane ø3.1/ø2 ø4/ø FEP (2) Modified PTFE (3) ø3.1/ø ø3.1/ø2 ø4/ø ø4/ø ø4/ø ø4/ø ø4/ø ø6/ø4 ø6/ø4 ø6/ø4 ø6/ø4 ø6/ø4 ir, Water (4) 1. MPa 1 MPa 0. MPa 1. MPa MPa to 60, Water: 0 to 40 (No freezing), M, M, JIS 020 (Metric fine thread) JIS 0203 (Taper thread for piping) Note 1) Soft is not compatible with water. Note 2), Note 3) ompatible only with hose nipple type. Note 4) arb fitting, barb elbow, barb elbow (H) are not compatible with water. JIS 020 (Metric fine thread) 3604 (Nipple M-3N, M-N: Stainless steel 303) Nylon 66: GF30%, Stainless steel 304, NR (PV for ) Fitting Markings for pplicable Tubing Material (arb fitting, arb elbow, arb elbow (H)) Tubing material determines the compatible fittings. (Refer to the table below.) onnection, M Tubing Soft Polyurethane Nylon Soft Polyurethane Fitting marking for applicable material arb fittings arb elbow arb elbow (H) Marking Marking Marking ody of M-E, M-ER, M-M is not surface-treated. Electroless nickle plate treated is available as option -X2. Surface treatment (olor) Electroless nickel plated (Silver color) Electroless nickel plated (Silver color) Electroless nickel plated (lack color) [Except stud] ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (60) Outside Local rea: (00)

2 Miniature Fittings Series M Series, R 1/ Series M Series Description pplication Note M-3U-3 M-3U-4 M-3LU-3 M-3LU-4 M-3UL 1 M-3UT M-3N M-3P M-01N-4 tee Series Description pplication Note M-01N-6 arb fitting M-01U-4 for soft R M-01U-6 Hose nipple M-01H-4 M-01H-6 arb fitting for soft tube arb elbow for soft elbow Nipple Plug arb fitting for ody rotates ody rotates ody rotates Fitting to workpiece and fitting to fitting Use to plug unused port For and For, soft ø3.1/ x ø3.1/2 x x ø3.1/ x ø3.1/2 x x female x male female x female x male male x male x x x x x x Series Description pplication Note Series Description pplication Note M-N-4 M-N-6 P.14 arb fitting for soft M-U-3 M-U-4 M-U-6 M-LN-4 M M-LHN-6 P.14 M-LN-6 P.14 arb elbow for soft M-LU-3 M-LU-4 M-LHU-3 M-LHU-4 P.14 M-LHU-6 P.14 Hose nipple M-H-4 M-H-6 M-HL-4 P.14 Hose elbow M-HL-6 Hose elbow (H) M-HLH-4 M-HLH-6 arb fitting for arb elbow for For For ody rotates around the ody rotates at 360 M-LU-6 P.14 arb elbow (H) M-LHN-4 for ody rotates arb elbow (H) for soft ody rotates Elbow For and For, soft and For, soft and ody rotates ø3.1/ ø3.1/2 ø3.1/ ø3.1/2 ø3.1/ ø3.1/2 M-T M-UL M-UT M-J M-N M M-UN M-E M-ER M-M M- M-P tee elbow tee nipple ulkhead union ulkhead reducer P.14 Manifold P.14 ushing P.14 P.14 oth sides allow 90 ody rotates ody rotates Extention fitting Solid piece moves fitting up from workpiece Nipple Plug Fitting to workpiece and fitting to fitting ody rotates Panel-mount Reduction from Rc 1/ to M including panel or bracket mounting For reducing Rc 1/ female be diverted to up to 9, M stations, including panel or bracket mounting For reducing R 1/ female to M. Use to plug unused M port. M female female female M female male M female female male M male female M male male M male male PT. M female female Rc 1 female Rc 1 female (9 stations) female K M H KK D MS LQ MQR T M-L One-sided 90 elbow M female female ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (60) Outside Local rea: (00)

3 Series M Series arb Fitting for Soft Tubing: M-3U-3 arb Fitting for Soft Tubing: M-3U-4 : 0.9 mm 2 : 0.6 g : 0.9 mm 2 : 0. g arb Elbow for Soft Tubing: M-3LU-3 arb Elbow for Soft Tubing: M-3LU-4 Elbow: M-3UL : 0.6 mm 2 : 0. g : 0.6 mm 2 Tee: M-3UT : 0.9 g 2 x : 0.6 mm 2 : 1.6 g : 0.6 mm 2 : g Nipple: M-3N Plug: M-3P : 0.6 g : 0.9 mm 2 : 0. g Series R 1/ arb Fitting for Nylon Tubing, Soft Tubing: M-01-4/-6 pplicable Nylon Soft M-01N-4 M-01N-6 M-01U-4 M-01U ø Hose Nipple: M-01H-4/-6 M-01H-4 M-01H ø 3 6. E ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (60) Outside Local rea: (00)

4 Miniature Fittings Series M Series M arb Fitting for Nylon Tubing: M-N-4/-6 M-N-4 M-N ø arb Fitting for Soft Tubing: M-U-3/-4/-6 M-U M-U M-U-6 14 arb Elbow for Nylon Tubing: M-LN-4/-6 arb Elbow for Soft Tubing: M-LU-3/-4/-6 M-LN-4 M-LN-6 M-LU-3 M-LU-4 M-LU ø M-LN-4 M-LU-3/-4 flats flats K M H KK D MS LQ MQR T M-LN-6 M-LU-6 arb Elbow for Nylon Tubing: M-LHN-4/-6 arb Elbow for Soft Tubing: M-LHU-3/-4/-6 M-LHN-4 M-LHN-6 M-LHU-3 M-LHU-4 M-LHU M-LHN-4 M-LHU-3/-4 flats M-LHN-6 M-LHU-6 flats Hose Nipple: M-H-4/-6 M-H-4 M-H øe 6. H flats H ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (60) Outside Local rea: (00)

5 Series M Series M Hose Elbow: M-HL-4/-6 M-HL-4 M-HL D øe øf Hose Elbow: M-HLH-4/-6 M-HLH-4 M-HLH D øe øf 6. G. 6 H 1 16 I flats Elbow: M-L Tee: M-T : 4.2 g : 3. g Elbow: M-UL Tee: M-UT flats flats 2 x : mm 2 :.3 g : mm 2 : 4. g Extension Fitting: M-J Nipple: M-N flats flats : mm 2 : 3.6 g : mm 2 : 1. g Nipple: M-UN flats flats ulkhead Union: M-E M x 0. Mounting hole Mounting plate thickness 3. max. : mm 2 : 3.9 g For the plate thickness 3. to 6 mm, give the plate tapping M x 0., and then screw-in. : 4.6 g 146 ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (60) Outside Local rea: (00)

6 Miniature Fittings Series M Series M ulkhead Reducer: M-ER Manifold: M-M Rc 1 M12 x 0. 9 x M12 x 0. ushing: M- flats 14 Mounting hole flats 14 Mounting plate thickness 3. max. For the plate thinkness 3. to 6 mm, give the plate tapping M12 x 0., and then screw-in. : 12 g :. g Plug: M-P Precautions flats 1 flats 2 x ø. Panel mounting plate thickness max. 3. mm For the plate thinkness 3. to 6 mm, give the plate tapping M12 x 0., and then screw-in. : 9 g e sure to read this before handling. Refer to front matters and 9 for Safety Instructions and pages 13 to 16 for Fittings and Tubing Precautions. : 1.3 g K M H KK D MS LQ MQR T Tightening of /M Threads aution 1. Tighten by hand, and give it an additional turn with a wrench. Please check the number of tightening revolutions using the table below. If tightened excessively, thread portion may be damaged and gasket may be deformed. This will cause air leakage. On the contrary, if tightened insufficiently, thread may loosen causing air leakage. Thread M M-3U- M-3N M-3P M-3LU- M-3UL M-3UT M-N- M-U- M-H- M-J M-N M-UN M-P M-LN-6 M-LU-6 M-LHN-6 M-LHU-6 M-HL- M-HLH- M-LN-4 M-LU-3,4 M-LHN-4 M-LHU-3,4 M-UL M-UT Number of tightening rotations pprox. 1/4 rotations pprox. 1/2 rotations pprox. 1/6 to 1/4 rotations Note) pprox. 1/2 rotations Note) Use of Tube with Hose Nipple aution 1. ut the tube perpendicularly to the tube axis to a little longer than required length. (Use tube cutter TK-1, TK-2 or TK-3.) 2. Pass the tube through the cap nut. 3. Push the tube until it comes to the end of the barb portion, or it may cause air leakage or hose releasing. 4. Tighten the cap nut firmly by hand on the fitting. Use of Tube with arb Fitting aution 1. ut the tube perpendicularly to the tube axis to a little longer than required length. (Use tube cutter TK-1, TK-2 or TK-3.) 2. Push the tube until it comes to the end of the barb portion, or it may cause air leakage or release hose. Note) s a guideline, the tightening torque should be 1 to 1. N m. 14 ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (60) Outside Local rea: (00)

7 Series M Made to Order Specifications Please contact SM for detailed dimensions, specifications, and delivery. 1 Material Modification Symbol Specifications material: Stainless steel 304, NR pplicable thread part no. X3 IN M Note) M-G2 material: Stainless steel 304, FKM X226 pplicable thread part no. G-DPH0049 material: Stainless steel 316, Special FKM X112 pplicable thread part no. M M-G3 Note) ompatible with only models using M-GH. Spare Parts Description Part no. pplicable thread Material pplicable model M-3G PV M-G1 PV M-G2 Stainless steel 304, NR M-G3 M-GH M Stainless steel 316, Special FKM Nylon 66, GF30% M-L -6, M-LH -6 M-HL-4, 6, M-HLH4, 6 M-6G M-10/32G M UNF Stainless steel 304, NR For KQ2 M6 thread Series KQ2, UNF ap nut M--4-P01 M--6-P (With electroless nickel plated) 3604 (With electroless nickel plated) M-01H-4, M-H-4 M-HL-4, M-HLH-4 M-01H-6, M-H-6 M-HL-6, M-HLH-6 14 ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (60) Outside Local rea: (00)