Stainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
|
|
- Erik Townsend
- 6 years ago
- Views:
Transcription
1 Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release button (White) Small disconnecting force. When the fitting is removed, the chuck and collet are released, thus preventing them from biting into the tube excessively. Unique shape of easy tube release. Packing Can be used for a wide range of pressures from a low vacuum up to a pressure of 1.0Pa The use of a special profile ensures sealing and reduces resistance when the tube is inserted. Tube Body (White) O ring Stud Possible to mount in narrow space. The body and ed portion turn. PAT. Stainless specification applicable to corrosive environments Applicable Tubing Tube material Nylon, Soft nylon, Polyurethane ø, ø, ø, ø, ø, ø1 SUS 3 stainless steel adopted for metal elements Suitable for use in CRT production lines where contact with copper must be avoided, food processing machines where water or salt water splashes and clean room where discolouration of copper material and corrosion must be avoided. Specifications Operating fluid Air, Water ax. operating pressure 1.0Pa ax. operating vacuum pressure 0kPa Proof pressure Ambient and fluid temperature Thread portion Thread Nut 3.0Pa 5 to 0 C (Water: 0 to 0 C)(No freezing) JIS B 0203 (Taper pipe ) JIS B 02 Class 2 (etric fine ) Sealant (Thread portion) With/Without sealant Note1) Applicable for general industry water. Consult us if using for other kinds of fluid. Surge pressure must be under the max. operating pressure. Note2) Suffix S to part number if sealant is desired. Component aterials Body Stud (Thread) Chuck Guide Collet, Release button Packing, O ring Stainless steel (SUS3), PBT Stainless steel (SUS3) Stainless steel (SUS) SUS, Stainless steel (SUS3), PO PO NBR 7-5
2 Stainless One-touch Fittings Series KG odel exagon socket head male connector KGS P.7-7 Universal male elbow KGV P.7-9 Internal hex. allows connection by using an hex. key wrench, for confined spaces. Bulkhead union KGE P.7-5 Extended male elbow KGW P.7-1 Used for junction connection of two tubes for installation of a panel. For when the elbow extends over a standard elbow for easier of connection/disconnection of tubing. Universal male elbow allows connection by using a socket wrench for confined spaces. Bulkhead connector KGE P.7-5 Used for transit connection of a tube and a male screw for installation of a panel. ale connector KG P.7-7 Used to pipe in the same direction from female ed portion. ost common style. ale elbow KG P.7- Used to pipe in right angle to female ed portion. ost common style. Branch tee KGT P.7-1 Used to branch line from female in both 90 directions. Female connector KGF P.7- Used to pipe from the male ed portion such as a pressure gage. Union elbow KG P.7-0 tubes at right angles. Union tee KGT P.7-1 tubes in both 90 directions. Straight union KG P.7- tubes in the same direction. Plug-in elbow KG P.7-0 Used to change by 90 in a tube fetching direction from Onetouch fittings. Different dia. tee KGT P.7-2 tubes with size down in both 90 directions. Different dia. straight KG P.7- ale branch connector KGU P.7-9 different size tubes. Used for connection at right angles from the female. ale delta KGD Delta KGD P.7-2 P.7-3 Used for two branch piping at ritht angles from female. Used for three branch connections of tubes at right angles. ale run tee KGY P.7-2 Different dia. double union Y KGUD P.7- Used for a branch line in the same direction from female and in 90 directions. Used for four branch connections in the same direction, reducing the size of the tubes. Branch union elbow KGU P.7-0 Used for connection of tubes at right angles. Double branch KGUD P.7-3 Used for four branch piping in the same direction from the female. Union Y KGU P.7- tubes in the same direction. 7-
3 Series KG odel Different dia. union Y KGU P.7- tubes with size down in the same direction Plug-in reducer KGR P.7- Used to change size of One-touch fittngs. Tube cap KGC PP.7-5 Used to plug the unused tube. Branch Y KGU P.7-3 Used to branch line in the same direction from female. ale connector: KG <5> <> 1 (ex.) 5 KG KG KG KG0-5 KG0-01 KG KG KG KG KG0-03 KG KG KG KG KG KG KG KG KG (9) 7 Reference dimensions after installation. A exagon socket head male connector: KGS <5> <> (ex.) KGS0-5 KGS0-01 KGS KGS KGS KGS KGS KGS KGS KGS KGS KGS KGS KGS KGS A Reference dimensions after installation. 7-7
4 Stainless One-touch Fittings Series KG Female connector: KGF Straight union: KG 1 2 (ex.) 1 KGF KGF KGF0-01 KGF KGF0-03 KGF0-01 KGF0-02 KGF KGF KGF KGF KGF KGF KG KG KG KG KG Reference dimensions after installation. Different dia. straight: KG 1 2 = > KG KG KG KG ale elbow: KG <5> <> KG0-5 KG0-01 KG0-02 KG0-5 KG0-01 KG0-02 KG0-03 KG0-01 KG0-02 KG0-03 KG-01 KG-02 KG-03 KG-0 KG-02 KG-03 KG-0 KG1-03 KG1-0 (ex.) D1 D2 1 2 A (71) () 5 Reference dimensions after installation. Note1) ( ): Values for soft nylon. Note2) 1: max. diameter 7-
5 Series KG ale branch connector: KGU <5> <> 3 2 Q2 A ø ø.2 2-applicable tubing 1 Q1 1 P 2 x applicable tubing (ex.) 5 KGU0-5 1 KGU KGU KGU0-5 1 KGU KGU0-02 KGU0-03 KGU0-01 KGU0-02 KGU KGU-02 3 KGU KGU-0 KGU-02 KGU KGU A P Q1 Q Reference dimensions after installation. Q2 P 3 2 A ø ø.2 Q1 Universal male elbow: KGV <5> <> KGV0-5 KGV0-01 KGV0-5 KGV0-01 KGV0-02 KGV0-01 KGV0-02 KGV0-03 KGV-02 KGV-03 KGV-03 KGV-0 (ex.) A Reference dimensions after installation. Note1) 1: max. diameter 7-9
6 Stainless One-touch Fittings Series KG Union elbow: KG Q KG KG KG KG KG KG () Branch union elbow: KGU x applicable tubing ØD 1 2 Q1 Q2 P KGU KGU KGU KGU KGU Q2 P ø ø.2 Q1 Plug-in elbow: KG Fitting size ød A KG KG KG KG-99 KG Note1) 1: max. diameter
7 Series KG Extended male elbow: KGW <5> <> A (ex.) 5 KGW KGW KGW KGW KGW KGW KGW KGW0-01 KGW KGW KGW KGW KGW KGW KGW KGW Reference dimensions after installation. Note1) 1: max. diameter Branch tee: KGT <5> <> A (ex.) Nylon Urethane 5 KGT KGT KGT KGT KGT KGT KGT KGT0-01 KGT KGT KGT KGT KGT KGT KGT KGT KGT KGT (71) KGT (0) Reference dimensions after installation. Note1) 1: max. diameter Union tee: KGT 1 Q KGT0-00 KGT0-00 KGT KGT-00 KGT KGT () 0 7-1
8 Stainless One-touch Fittings Series KG Different diameter tee: KGT = > Q 1 2 KGT KGT KGT0- KGT Note1) 1: max. diameter 5 1 ale run tee: KGY <5> <> A (ex.) 5 KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY KGY (3) Reference dimensions after installation. Note1) 1: max. diameter ale delta: KGD <5> <> 1 2 A (ex.) Q 5 KGD KGD KGD KGD KGD KGD KGD KGD KGD KGD KGD KGD KGD KGD-02 KGD KGD Reference dimensions after installation. 7-2
9 Series KG Delta: KGD KGD KGD KGD KGD KGD Q Branch Y : KGU <5> <> 5 KGU0-5 1 KGU KGU KGU0-5 1 KGU KGU0-02 KGU0-03 KGU KGU KGU KGU-02 3 KGU KGU-0 1 KGU-02 3 KGU KGU-0 (ex.) P A Reference dimensions after installation. Double branch: KGUD 1 (ex.) 1 KGUD KGUD KGUD0-01 KGUD I A Q P Reference dimensions after installation. Note1) 1: max. diameter 7-3
10 Stainless One-touch Fittings Series KG Union Y : KGU 1 KGU KGU KGU KGU KGU P Q Different diameter union Y : KGU P Q 1 2 = > KGU KGU KGU KGU Note1) 1, 2: max. diameter 1 27 Different diameter double union Y : KGUD P I Q 1 2 = > KGUD KGUD Note1) 1, 2: max. diameter Plug-in reducer: KGR Fitting size ød 1 1 A KGR0-0 KGR0-0 KGR0- KGR0-0 KGR0-0 KGR0- KGR0- KGR0- KGR0- KGR- KGR-1 KGR (.5) 5.3 (.1)
11 Series KG Bulkhead union: KGE ounting T() (ex.) hole KGE0-00 X KGE X KGE X KGE X KGE-00 X KGE X (9) 5 Note1) ( ): Values for soft nylon. Bulkhead connector: KGE T() ounting area (mm ) (ex.) (ex.) hole 1 KGE X KGE KGE KGE X KGE KGE KGE X KGE KGE X KGE KGE X KGE KGE X (9) 2 KGE Note1) ( ): Values for soft nylon. Tube cap: KGC KGC KGC KGC KGC KGC KGC
Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationH/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications
Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance
More informationApplicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications
One-touch Mini : Metric Size Connecting : M3, M5, R1/8 Outside diameter reduced y 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring
More informationStainless Steel 316 One-touch Fittings
CT.ES50- Stainless Steel One-touch Fittings aterial etal parts: Stainless steel Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP, PF, Nylon,
More informationOne-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal
Stainless Steel One-touch Fittings etal material: Stainless steel 303 RoS Improved tube insertion/removal Insertion : force ax. 30% reduction ax. Removal : force 20% reduction : Tube removal strength is
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb. Configuration for easy insertion into the tube Holds the tube tightly.
iniature Fittings Stainless Steel 316 Series S RoHS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose
More informationPlug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
More informationInsert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
More informationTubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationRectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector Series KDM No. of Connecting Tubes: 10, RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
More informationPort size AK AK AK AK /04 AK /10. Specifications
Check Valve AK Series RoS arge flow capacity ow cracking : 0.02 Pa A wide variation of models AK2000-01 AK2000-02 AK000-02 1 8 1 1 dm /(s bar). 9. Critical ratio Weight (g) 0 1 AK000-0 8 0.2 10 AK000-0
More informationPressure measurements can easily be taken any time, anywhere. POWER LIGHT
Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held
More informationTube Fitting Stainless SUS316 Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type of Corrosion Resistant Steel Tube Fitting SUS316 108 Copper alloy free material Nongrease Clean-room packaging
More informationPort size. Part no. M5 x 0.8 R 1/8 R 1/4 R 1/4 R 3/8 R 1/ UNF NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2. Specifications
Dual Speed Controller with One-touch Fitting Series D RoS Enables bi-directional flow control. Unrestricted 3 tube mounting direction. odel Part no. D23F-5 D33F-1 D43F-2 D53F-2 D53F-3 D3F-4 D23F-U/32 D33F-N1
More informationTube Fitting Stainless SUS316 Compression Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Compression Fitting of Corrosion Resistant Steel Tube Fitting SUS316 Compression Fitting 120 Chemical Industry Medical Industry
More informationCheck Valve with One-touch Fitting. Male Connector Type Can be mounted directly onto equipment. Can be used for vacuum ( 100kPa)
N7 K/KB Series Check with One-touch Fittin ale Connector Type Can be mounted directly onto equipment Bushin Type Can be used in applications with splashin coolant and spatter, etc. Straiht Type Easily
More informationMetal One-touch Fittings
etal One-touch Fittings Compact and ight pprox. 0% Comparison with KB06-01S Down NEW KB206-01S 1. mm New RoS Conventional model KB06-01S.1 mm pprox. 62% Comparison with KB06-01S ore configuration variations
More informationConnector Series. Multiple Push-In Fitting Type. Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band.
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multiple Push-In Fitting Type Connector 4 Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band. Combinable
More informationStainless One-touch Fittings. Applicable Tubing Tubing material Tubing O.D. Specifications. Ambient and fluid temperature
Stainless One-touch Fittings Series KG Guide Collet Chuck Suitable for use with nylon, soft nylon and urethane. Large retaining force. as large retaining force while holding force is increased by the collet.
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4
Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
More informationClean One-touch Fittings
Clean One-touch Fittins Series KP/KP/KPG K KK D S T Series KP Series KP Series KPG 2 One-touch fittins and for blowin systems and drive air One-touch fittins (for blowin) Series KP Collet Polypropylene
More informationSpeed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 ASP330F-N01 ASP430F-N02 ASP530F-N03 ASP630F-N04
Speed Controller with Pilot Check Valve with One-touch Fitting Series ASP Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationatalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More informationMiniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction
More informationCOUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
More informationMain Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationHow to Order. M5 M5 x 0.8 U10/ UNF
Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type
More informationStatic Electricity Prevention Equipment
Static Electricity Prevention Equipment Antistatic Equipment Don t charge static electricity (Conductivity) Fittings Tubing Pad Speed Controller Electrostatic Removal Equipment Eliminates static electricity
More informationTube Applicable for nylon, soft nylon and polyurethane tubing.
Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationSUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
More informationPneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
More informationSpeed Controller with Indicator
Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More informationSpecifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D.
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationstainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
More informationRectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector KDM Series No. of Connecting Tubes: 1, 2 RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
More informationDRIVE TRAIN 300E-450 HP 19
DRIVE TRAIN 00E-0 HP SOLID STEEL CASING THIS SIDE 0 REV 0 X MOTOR A BOLT B BOLT GASKET, MOTOR TO GEAR CASE GASKET, MOTOR TO GEAR CASE TAPER PIN, GEAR CASE TO MOTOR 0 SLEEVE, SHAFT SEAL, SHAFT 0 O-RING
More informationThrottle (Needle) Valve PP Series
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Flow Control Valve for Clean Environment Throttle (Needle) Valve 466 Copper alloy free material Nongrease Clean-room
More informationTube Fitting Anti-spatter Series
FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Flame-Retardant Spatter-proof Push-In Fitting Type for Pneumatic Piping Anti-spatter 204 Flame-Retardant Resin. Resistant to Flame and Weld Spatter.
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationMulti-Circuit Rotary Block
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multi-Circuit Block for Rotating Applications Multi-Circuit Rotary Block 302 Make to Order Suitable for Low-Speed Rotating Applications
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationTube Fitting PP Series
http://www.pisco.co.jp FITTING ONTOLLE VALVE TUE MAKE-TO-ODE PODUTS Push-In Fitting Type for lean Environment Tube Fitting 178 opper alloy free material Nongrease lean-room packaging option hemical Industry
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationThrottle (Needle) Valve Standard Series
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Throttle (Needle) Valve Throttle (Needle) Valve Standard 448 Control Actuator Speed or Pneumatic Signals. Adjustable
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationSpecifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationF LOW CONTROL EQUIPMENT SPEED CONTROLLERS ACCESSORIES MOUNTING BRACKET NOW ALSO WHITE AS2001F AS2051F AS3001F AS4001F ORDER LINES
F LOW CONTROL EQUIPMENT 3-3 SPEED CONTROLLER WITH ONE TOUCH FITTINGS: IN-LINE TYPE SERIES AS1001F, 2001F, 2051F, 3001F, 4001F Minimises installation time and cost Accepts nylon and polyurethane tubing
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationSpeed Controller High Flow
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Speed Control Valve for High Speed Cylinder High Flow Speed Control Valve for Actuator. High Flow Type with Same Size as. Suitable for
More informationSpeed Controller with Indicator
Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! Indicator window Body size Body size or larger Indicator window Number
More informationPneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
More informationFlow Control Equipment
Flow Control Equipment Speed Controller (With One-touch Fittings, Standard Style) Metering Valve with Silencer, Quick Exhaust Valve, Check Valve Safety Speed Control Valve Speed Controller with One-touch
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationSpeed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
More informationMur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
More informationTube Fitting Brass Series
http://www.pisco.co.jp FITTING ONTO VV TU MK-TO-OD PODUTS rass Push-In Fitting Type for Spatter-Proof Tube Fitting rass 212 N, FKM, N for Seal ubber Selection esistant to Flame and Weld Spatter Superior
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationPneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
More informationSuper-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
More information82 series Brass compression fittings
> > Port size: Ø 6... 42 mm tube size, SPP and SPT thread > > Suitable for use on seam welded as well as seamless tube or pipe > > For use in areas of vibration > > Pre-assembled units > > No special assembly
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationIn-line Filter of Easy Maintenance
http://www.pisco.co.jp AIR PREPARATION ACTUATOR PLARAILCHAIN HARMO ROBOT PARTS In-line Filter of Easy Maintenance 176 Keeping the same usability with vacuum filter VFU Series and usable with positive pressure.
More informationin stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
More informationVISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
More informationPush-In Fitting Type Quick Exhaust Valve
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Valve Valve 482 Suitable for High-Speed Cylinder. Standard Valve is equipped with Silencer. Re-adjustment of exhaust
More informationLight Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
More informationMINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
More information83 series Brass compression fittings
> > Port size: Ø /8... 2, SPP and SPT thread > > For use in areas of vibration > > Pre-assembled units > > No special assembly tools or heat required > > an be remade without damage to tube Technical features
More informationCompact Direct Operated 2/3 Port Solenoid Valve for Water and Air
Compact Direct Operated / Port Solenoid Valve for Water and Air 0/0/0: Port, 00/00: Port 0/0/0 -port type has been remodeled to new compact and lightweight series. For details about new series, refer to
More information83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
More informationBASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
More informationVacuum pad for packaging bag
Vacuum pad for bag-like article conveyance Characteristics http://en.pisco.co.jp/ New Product Realizes followability to work-piece and posture stabilization during conveyance. Soft material is used for
More informationAS Series. 4.0 g. Weight: Approx. 27% lighter. Flow Rate Reproducibility. Larger Knob. Easy Identification of Product Type. 5.5 g.
Speed Controller with One-touch Fittings In-line In-line Type y Easo t use RoHS Brass Stainless steel Reduces flow setting time! Push-lock type Knob O.D.: Almost doubled! Easy to lock ø9.4 Unlock ø5 Lock
More information