Specifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
|
|
|
- Alfred Daniels
- 6 years ago
- Views:
Transcription
1 Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D. of. Selection from four types in accordance with the piping specifications The port valve discharges residual pressure from (A) with the handle set at SHUT. (There is no exhaust port.) Specifications Valve Fluid Proof pressure Max. operating pressure () Operating vacuum pressure Ambient temperature and operating fluid temperature material () Accessory (Option) Note ) Please note that when the valve is used at micro pressures of 0. MPa or less, valve leakage may be more than the standard value (5 cm /min). Note ) Use caution about the maximum operating pressure when soft nylon or polyurethane tubing is used. (Refer to Best Pneumatics No. 6 for details.) * Use ( port valve) for vacuum application. Construction / port valves Air.5 MPa.0 MPa 00 kpa 0 to 60 C Nylon, Soft nylon, Polyurethane port valve: Series port valve: Series w o q r t e The valve direction clearly indicates whether the valve is open or closed. (SHUT-OPEN: Counterclockwise) OPEN Symbol 90 port valve port valve (A) (A) (P) SHUT port valves and port valves can be distinguished by the color of their knobs. (R) Exhaust 80 Knob: port valve: (46) port valve: (46-) / port valve: (46-)... (Option) Exhaust (R) (P)(R) Component Parts No Replacement Parts Knob Description Body Knob Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette Description Standard type! i u y Model One-touch fitting One-touch fitting O.D. or less O.D. ø0 or more (P)-Male thread (A)-Male thread /8 or more Part no Flame resistant type 46-5 assembly Note ) -BA Note ) -BANote ) Note ) For details on selection of each bracket assembly part no., refer to the tables on page 8. Note ) The bracket, bolts, nuts, and washers are supplied with the bracket assembly.!0 Material Standard type PBT Flame resistant type Flame resistant PBT (UL standard V-0) Standard type POM Flame resistant type Flame resistant PBT (UL standard V-0) Flame resistant CR (UL standard V-0) POM POM Brass Electroless nickel plated Stainless steel NBR NBR HNBR Standard type POM Flame resistant type Flame resistant PBT(UL standard V-0) Note Applicable to the flame-resistant cover only
2 Finger Valve Series How to Order Standard type Flame resistant type 0S 0S R 04F 04F Made to Order Refer to page 86 for details port valve port valve Flame resistant type (P) port size 04F 06F 08F 0F F 0S 0S 0S 04S ø0 ø x 0.8 R 8 R R 8 R (A) port size 04F 06F 08F 0F F 0S 0S 0S 04S ø0 ø x 0.8 R 8 R R 8 R Nil None L With L-bracket and screws Flame resistant cover Nil No With cover C (For One-touch fitting only) Nil port valve (Standard) port valve R port valve (Option) port valve Standard Type (P): One-touch fitting (A): One-touch fitting (A) O.D. (mm) (P) O.D. (mm) ø0 ø ø0 ø (P): Male thread (A): One-touch fitting (A) O.D. (mm) (A) (A) (P) ø0 ø (P) 8 8 (P) 8 8 Flame Resistant Type (UL-94 Standard V-0 equivalent) 8 8 (P): One-touch fitting (A): Male thread O.D. (mm) ø0 ø (P): Male thread (A): Male thread 8 8 VM VMG VR VR5 VH VHS VHS (P): One-touch fitting (A): One-touch fitting (P) O.D. (mm) (A) ø0 ø O.D. (mm) ø0 ø (P): Male thread (A): Male thread (A) (P)
3 Series (P)/(A): One-touch Fitting mounting dimensions O. D. (mm) Model H L L L L4 L5 L6 M M Q (P) (A) (A) (R) Note) (g) (P) (A) assembly no F-04F BA F-04F F-06F BA F-06F F-08F BA F-08F F-0F BA F-0F F-F BA Note) port valve (P): Male Thread, (A): One-touch Fitting Connection S mounting dimensions thread R O. D. (mm) Model H L L L L4 L5 L6 M Q (P) (A) (A) (R) () () (Width (g) B across (P) (A) flats) assembly no F F BA S-04F S-06F BA S-08F S-06F BA S-08F S-0F BA S-F S-06F BA S-08F S-0F BA S-F S-0F S-F BA Note ) port valve Note ) Reference dimensions after insertion of R thread. 8
4 Finger Valve Series (P): One-touch Fitting, (A): Male Thread 50 Connection S mounting dimensions O. D. (mm) thread R Model H L L L L4 L5 L6 M Q (P) (A) (A) (R) () (Width (g) B () across (P) (A) flats) assembly no. 4-04F F-0S BA F F-0S F-0S BA F-0S -08F-0S F-0S BA F-0S F-0S F-0S BA F-04S -F-0S F-0S BA F-04S (P)/(A): Male Thread Note ) port valve Note ) Reference dimensions after insertion of R thread. VM VMG VR VR5 VH VHS VHS Connection thread S T mounting dimensions R Model H L L L L4 L5 L6 Q (P) (A) (A) (R) () B (g) (Width (Width across across (P) (A) flats) flats) assembly no BA S S-0S BA S-0S S-0S BA S-0S S-0S BA S-0S S-04S BA Note ) port valve Note ) Reference dimensions after insertion of R thread. 8
5 Series / Precautions Be sure to read before handling. Refer to front matter 5 for Safety Instructions and pages to 8 for /4/5 Port Solenoid Valve Precautions. Warning Design. Please contact SMC when fluids other than air are used.. Do not supply air pressure from (A) port. The air will leak out from (P) port.. Since the valve allows a small volume of air leakage, it may not be suitable for holding pressure in a pressure vessel. Selection Operation method: The valve must be switched to OPEN or SHUT instantly and securely. Stopping the handle halfway between the extreme positions may cause malfunction. Piping Precautions for handling the male threads of the R pipe fitting with seal. Use a wrench to secure the hexagon portion to screw in the fitting. If the size of the wrench is not appropriate it will be stripped.. To screw in the fitting, first hand-tighten; then, use a tool to rotate it to turns. If it is tightened excessively, more sealing agent will be forced out. Therefore, make sure to remove the extra sealing agent.. Re-use of fittings: ) Ordinarily, the fitting can be reused to times. ) Before reusing the fitting, clear off the sealing agent that remains on the removed pipe fitting using an air blower. If the sealing agent is peeled off and enters the peripheral equipment, it can cause air leakage. ) If the sealing effect has been lost, wrap a seal tape over the sealing agent to reuse the fitting. Do not use any sealing agent other than seal tape. Mounting L type bracket mounting: Apply a tightening torque of 0.5 to N m to the bolts when the bracket is mounted on the body. One-touch Fitting. When tubing of brands other than SMC s are used, verify that the tubing O.D. satisfies the following accuracy; Nylon tubing Within ±0. mm Soft nylon tubing Within ±0. mm Polyurethane tubing Within +0. mm, 0. mm If the tube s external accuracy is not satisfied, it may not be possible to connect the tube. Even if it is connected, air leakage or tube disconnection may result. 84
6 Finger Valve Series Flame Resistant Type: (P)/(A): One-touch Fitting mounting dimensions O. D. (mm) Model H L L L L4 L5 L6 L7 Q M M (P) (A) (A) (R) S (g) (P) (A) assembly no. 4 4 R-04F-04F ø4.4 -BA R-06F-06F BA R-08F-08F ø9. -BA R-0F-0F ø. -BA R-F-F ø5.7 -BA Flame Resistant Type: (P)/(A): Male Thread VM VMG VR VR5 VH VHS VHS Reference dimensions after insertion of R thread Connection S T mounting dimensions thread R Model H L L L L4 L5 L6 Q B (P) (A) (A) (R) (Width (Width (g) across across (P) (A) flats) flats) assembly no. 8 8 R-0S-0S BA R-0S-0S BA R-0S-0S BA R-04S-04S BA
7 Series Made to Order Please contact SMC for detailed dimensions, specifications and lead times. IN/OUT Size: Altered /4" Valve X05 07F 07F X05 port valve port valve (P) port size: /4" (A) port size: /4" IN/OUT size: Altered /4" valve Nil None L With L-bracket and screws Nil port valve (Standard) port valve R port valve (Option) port valve IN/OUT Size: Altered 5/6" Valve X6 09F 09F X6 port valve port valve (P) port size: 5/6" (A) port size: 5/6" IN/OUT size: Altered 5/6" valve Nil None L With L-bracket and screws Nil port valve (Standard) port valve R port valve (Option) port valve IN/OUT Size: Altered /8" Valve X09 F F X09 port valve port valve (P) port size: /8" (A) port size: /8" Nil L and screws Nil port valve (Standard) port valve R port valve (Option) port valve None With L-bracket IN/OUT size: Altered /8" valve 86
Specifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing
1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
Transmitters: Relay Valve
Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction
Transmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
Miniature Regulator Series ARJ310
Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates
Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
Speed Controller with Indicator
Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1
Pressure measurements can easily be taken any time, anywhere. POWER LIGHT
Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held
ASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4
Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing
Miniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication
Hand Valve VH Series VH0 Specifications VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa
Standard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
Speed Controller with Indicator
Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! Indicator window Body size Body size or larger Indicator window Number
2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Series ZSE3/ISE3 2-color digital display allows you to choose the setting according to your application requirements. 4 different display settings
Rectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector Series KDM No. of Connecting Tubes: 10, RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
Series ZSE30/ISE30. High Precision, 2-color Display Digital Pressure Switch. With One-touch fittings are newly introduced. PSE
High Precision, 2-color Display Digital Pressure Switch Series SE30/ISE30 SE ISE PSE I SE3 PS I SE 1 2 SP ISA2 IS SM PF2 IF Data With One-touch fittings are newly introduced. Straight type Elbow type 16-2-1
Standard Specifications. Model IN side OUT side Fluid Proof pressure Maximum operating pressure
Miniature Regulator Series ARJ1020F 2 Construction/Dimensions Lock nut M8 X 0.75 Panel screw Panel mounting hole Precautions Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety
Two Hand Control Valve
Two Hand Control Valve Series n output is available through synchronized, twohanded operation (within 0.5 s)! Conforming to EN574 RoHS (Interchangeable with XT92-67 ) Example of a basic circuit diagram
Standard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. 3 (Closed center) 3/4, 1 3 (Exhaust center)
Hand Valve Series VH Specifications VH VH Fluid Proof pressure Max. operating VH// pressure VH Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa. MPa MPa 5 to C
Port size AK AK AK AK /04 AK /10. Specifications
Check Valve AK Series RoS arge flow capacity ow cracking : 0.02 Pa A wide variation of models AK2000-01 AK2000-02 AK000-02 1 8 1 1 dm /(s bar). 9. Critical ratio Weight (g) 0 1 AK000-0 8 0.2 10 AK000-0
AS Series. 4.0 g. Weight: Approx. 27% lighter. Flow Rate Reproducibility. Larger Knob. Easy Identification of Product Type. 5.5 g.
Speed Controller with One-touch Fittings In-line In-line Type y Easo t use RoHS Brass Stainless steel Reduces flow setting time! Push-lock type Knob O.D.: Almost doubled! Easy to lock ø9.4 Unlock ø5 Lock
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. Semi-standard
Hand Valve Series VH Specifications VH0 VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa
1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 48 x 91 VR4151 VR4152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
F LOW CONTROL EQUIPMENT SPEED CONTROLLERS ACCESSORIES MOUNTING BRACKET NOW ALSO WHITE AS2001F AS2051F AS3001F AS4001F ORDER LINES
F LOW CONTROL EQUIPMENT 3-3 SPEED CONTROLLER WITH ONE TOUCH FITTINGS: IN-LINE TYPE SERIES AS1001F, 2001F, 2051F, 3001F, 4001F Minimises installation time and cost Accepts nylon and polyurethane tubing
Flow Control Equipment
Flow Control Equipment Speed Controller (With One-touch Fittings, Standard Style) Metering Valve with Silencer, Quick Exhaust Valve, Check Valve Safety Speed Control Valve Speed Controller with One-touch
Clean Regulator. SRH Series. Contamination controlled stainless steel regulator ARJ
Clean Regulator Series IR IRV VEX SRP ITV IC T AP1 Contamination controlled stainless steel regulator 855 Clean Regulator Series Contamination controlled stainless steel regulator Oil free Outstanding
Added 100 mm and 150 mm lengths. Actuators 10% Air leakage 20% Air blow 70% Current model
Blow Gun Series 20% reduction in power consumption with the SMC Blow gun + S coupler + Coil tube 10% reduction with the Blow gun () only RoHS With cover Extension nozzle Added mm and 150 mm lengths Pressure
Port size. Part no. M5 x 0.8 R 1/8 R 1/4 R 1/4 R 3/8 R 1/ UNF NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2. Specifications
Dual Speed Controller with One-touch Fitting Series D RoS Enables bi-directional flow control. Unrestricted 3 tube mounting direction. odel Part no. D23F-5 D33F-1 D43F-2 D53F-2 D53F-3 D3F-4 D23F-U/32 D33F-N1
Air Suction Filter. Series ZF. Prevent from occurring vacuum equipment trouble due to dust from vacuum pad ZFA ZFB ZFC
Air Suction Filter Series ZF Prevent from occurring vacuum equipment trouble due to dust from vacuum pad Series ZFA ZF Universal joint type Features Long maintenance cycle type (Large filter surface) Adaptable
Specifications. Fluid Operating pressure range Proof pressure Operating temperature range Filtration Element proof pressure differential
Air Suction Filter Series ZFA Prevents vacuum equipment trouble due to airborne contaminants. The collected dust does not remain in the case. Dust is removed easily at the time the filter element is replaced.
Exhaust Throttle (Needle) Valve ET
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Exhaust Throttle (Needle) Valve Exhaust Throttle (Needle) Valve ET 494 Exhaust Throttle (Needle) Valve with Silencer. Directly Connectable
Speed Controller High Flow
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Speed Control Valve for High Speed Cylinder High Flow Speed Control Valve for Actuator. High Flow Type with Same Size as. Suitable for
Standard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
SPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
Series VM. Mechanical Valve. VM1000 Side piping Bottom piping. VM100 Side piping Bottom piping VM200. Model Dimensions (mm) 2-38.
Mechanical Valve Series VM Model Dimensions (mm) VM1000 Side piping Bottom piping 11 X 36 X 16 11 X 28 X 25 VM100 Side piping Bottom piping 17 X 44 X 25 17 X 44 X 30 VM200 25 X 40 X 52 Basic Roller Lever
ASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 ASP330F-N01 ASP430F-N02 ASP530F-N03 ASP630F-N04
Speed Controller with Pilot Check Valve with One-touch Fitting Series ASP Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust
Transmitters: Relay Valve VR4151/4152
Transmitters: Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 JIS Symbol Precautions Be sure to read before handling.
2-Colour Display Type High-Precision Digital Pressure Switch Series ZSE30/ISE30 How to Order Option 1 Without lead wire Nil Lead wire with connector (Lead wire length: 2m) L For positive pressure For vacuum/low
Multi-Circuit Rotary Block
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multi-Circuit Block for Rotating Applications Multi-Circuit Rotary Block 302 Make to Order Suitable for Low-Speed Rotating Applications
Rectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND
Rectangular Multi-connector KDM Series No. of Connecting Tubes: 1, 2 RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units
Series VCHR. Direct Operated Regulator for 6.0 MPa (Relieving Type) Service life: 10 million cycles. How to Order
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
10 PSE53 0 M5. Port size. M5 x 0.8 ø6 reducer 1/4-inch reducer. the cable at the time of shipment. 10-PSE to -101 kpa
Series 0-PSE50 Remote type pressure sensor How to Order Clean series 0 PSE5 0 M5 Pressure sensing range Option 0 2 High pressure [0 to MPa] Vacuum [0 to 0 kpa] Low pressure [0 to 0 kpa] Compound pressure
How to Order. Body size
Standard Type Series N 00 Over 30 db () noise reduction Low back pressure Compact and easy mounting How to Order N 400 04 Body size 200 300 400 500 600 700 800 900 Thread type Symbol Type Nil R N NPT Symbol
HN B G1/US B G2/US B G3
HN B G/US B G/US B G Compact direct acting, port solenoid valve air, water,, low vacuum (. x 0 Pa (abs)) CONTENTS Safety precautions port solenoid valve HNB NC (normally closed) type USB NC (normally closed)
Related Products VR4151/4152 Relay Valve
Related Products VR4151/4152 Relay Valve Appropriate output sequences are affected according to the signal received from the machanical valve. Specifications 1 Fluid Air Operating pressure 0 to 1.0MPa
Push-In Fitting Type Quick Exhaust Valve
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Valve Valve 482 Suitable for High-Speed Cylinder. Standard Valve is equipped with Silencer. Re-adjustment of exhaust
Air Suction Filter / In-line Type With One-touch Fittings. Model ZFC ZFC ZFC ZFC ZFC ZFC ZFC ZFC051-03
In-line type air suction filter is used to prevent vacuum equipment trouble from occurring due to dust in the air IN/OUT straight piping Easy installation and removal with one-touch fittings Light and
Plug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
Series SYA3000/5000/7000
1 Port Air Operated Valve Series SYA000/000/7000 Body ported Base mounted Base mounted How to Order A, B port size Thread type Thread piping (Inch size) Nil Rc Symbol Port size Applicable series Symbol
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
Compact / Lightweight 2 Port Solenoid Valve
ompact / Lightweight 2 Port Solenoid Valve /-XF For ir/water ompact / Lightweight resin body (PPS) Weight: 20 g (-XF) RoHS IP65 mm Power consumption 3 W (Standard) 0.5 W (With power-saving circuit) 48
3 Port Solenoid Valve Direct Operated Poppet Type 02 1 G VT325. For manifold: Enter VO. Valve option. Nil Standard V For vacuum Option.
3 Port Solenoid Valve Direct Operated Poppet Type Series VT325 Rubber Seal [Option] Note) Applicable only for DIN terminal type. Compact yet provides a large flow capacity Dimensions (W x H x D) 55 x 118
2/3 Port Mechanical Valve. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
2/3 Port Mechanical Valve Series 00 Large flow capacity. A variety of actuator types. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
AN 00/AN 02/AN 03/25/AN
Silencer AN 00/AN 02/AN 03/25/AN Standard Series AN 00 Over 30dB(A) noise reduction Low back pressure Compact and easy mounting High noise reduction style Series AN 02 Over 35dB(A) noise reduction Case
Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
Mechanical Valve Series VM
Mechanical Valve Series VM Model Dimensions (mm) VM1000 Side piping Bottom piping 11 X 36 X 16 11 X 28 X 25 VM100 Side piping Bottom piping 17 X 44 X 25 17 X 44 X 30 VM200 25 X 40 X 52 Basic Roller Lever
Connector Series. Multiple Push-In Fitting Type. Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band.
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multiple Push-In Fitting Type Connector 4 Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band. Combinable
How to Order. Nozzle. Nil Connection size N02 N03 F02 F H06 H08 H10 H07 H09 H11
Blow Gun RoHS How to Order VMG W Blow gun Standard type Series Resin body lever type W BU Piping entry Bottom Top Body color White ark blue Symbol Nil 3 4 3 3 4 3 3 33 34 Male High efficiency Low noise
Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
Body width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S.
High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure of 0.5MPa, subject to clean, dry air) 4 Port Direct
2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Settings can be copied to up to 1 slave sensors at once. The settings of the master sensor can be copied to the slave sensors. Reduced setting efforts
3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot
3 Port Solenoid Valve Pilot Operated Poppet Type Series VG342 Rubber Seal [Option] Low power consumption 4.8 W DC (Standard type) 2 W DC (Energy-saving type) No lubrication required Possible to use in
Pressure Relief 3 Port Valve With Locking Holes
Doc. No. VH*-OMQ0023-B PRODUCT NAME Pressure Relief 3 Port Valve With Locking Holes MODEL / Series / Product Number VHS20-(F,N)01~02A,B(-B,S)(-K,R,Z) VHS30-(F,N)02~03A,B(-B,S)(-K,R,Z) VHS40-(F,N)02~04A,B(-B,S)(-K,R,Z)
3-step setting. 2-Color Display High-Precision Digital Pressure Switch. Series ZSE30A(F)/ISE30A. Added vacuum range.
2-Color Display High-Precision Digital Pressure Switch Series ZSE3A(F)/ISE3A RoHS Can copy to up to 1 switches simultaneously. The settings of the master sensor can be copied to the slave sensors. Reducing
Vacuum applications possible (up to 100kPa) Base mounted. Cylinder bore size (mm) Series CM2. Pressure: 0.5MPa Load ratio: 50% Cylinder stroke: 300mm
4 Port Direct Operated Poppet Solenoid Valve Series D1000 High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure
Insert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
Precision Clean Regulator
Precision Clean Regulator Series AR45 AMR ARM -A VY AP00 High precision, low flow consumption stainless steel regulator 869 Precision Clean Regulator Series High precision, low flow consumption stainless
Soft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
In-line Filter of Easy Maintenance
http://www.pisco.co.jp AIR PREPARATION ACTUATOR PLARAILCHAIN HARMO ROBOT PARTS In-line Filter of Easy Maintenance 176 Keeping the same usability with vacuum filter VFU Series and usable with positive pressure.
Series AV2000/3000/4000/5000
Soft Start-up Valve Series AV/3/4/5 Series introduced! A start-up valve that gradually increases supply pressure during start up and rapidly exhausts system air when the supply air is shut off AC AV AU
3 Port Solenoid Valve Direct Operated Poppet Type
3 Port Solenoid Valve Direct Operated Poppet Type VK300 Series Rubber Seal [Option] Universal porting Available for N.C. valve, N.O. valve, divider valve, selector valve, etc. C: 0.80 dm 3 /(s bar) (Passage
MICRO EJECTORS. Micro ejector single unit (without solenoid valve) ME. Micro ejector with solenoid valve DC24V. Block-off plate ME MA-BP
Micro Ejector Order Codes Manifold Order Codes Micro ejector single unit (without solenoid valve) ME Body model nozzle diameter : Maximum flow rate on vacuum side 03 0.3 : 3.0R/min. [0.012in., 0.106ft.
3 Port Air Operated Valve
Port Air Operated Valve 00/500/00 Series RoHS 1555 00/500/00 Series Model Selection by Operating Conditions q Air Operated Valve: Single Unit Series Sonic conductance C [dm /(s bar)] Type of actuation
ARM1000/2000. Standard Specifications
.5- Regulator Manifold ARM000/000 4 connection methods Standard Specifications Fluid Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Cracking pressure (Valve) Construction
Compact Proportional Solenoid Valve
Compact Proportional Solenoid Valve Series Repeatability: % or less Hysteresis:1% or less Fluid Flow rate control range Note) Series Air, Inert gas to L/min to L/min Note) Varies depending on the model.
Throttle (Needle) Valve PP Series
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Flow Control Valve for Clean Environment Throttle (Needle) Valve 466 Copper alloy free material Nongrease Clean-room
2-Color Display High-Precision Digital Pressure Switch Series ZSE40A(F)/ISE40A
2-Color Display High-Precision Digital Pressure Switch Series ZSEA(F)/ISEA New M8 connector type RoHS IP65 Applicable fluid Air, Non-corrosive gas, Non-flammable gas Can copy to up to 10 switches simultaneously.
Series AN /Series AMC
s/exhaust Cleaner / Noise reduction Nominal filtration rating (eference values) Oil mist removal ratio Standard type Low back pressure Compact and easy mounting 00 30 db (A) 00 µm 50 µm 5-0-2 Compact type
For Pneumatic Piping/Fittings & Tubing Prior to Use
For Pneumatic Piping/Fittings & Tubing Prior to Use Fittings with Sealant Seal material (fluororesin) is coated on the thread part to the proper thickness and within the proper coating range, which reduces
Specifications Fluid. 5 to 60 C (No freezing) Effective area. Basic Roller lever. Mechanical operation. One way roller lever.
Rubber Seal Compact design, large flow capacity 18 mm 2 High cycle rate, long life/300 c.p.m. or less Piping possible to any EXH port. Proper countermeasures can be taken for applications in which the
Set value (Threshold value) Bottom value. *2 Further reduced by approx. 60% in power-saving mode (For 20 series)
3-Screen Display High-Precision Digital Pressure Switch New Added Variations! For general fluids IP65 2 outputs Analog output Setting is possible while checking Main screen the measured value. Sub screen
MANIFOLD REGULATORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution MANIFOLD REGULATORS
CCESSORIES GENERL CTLOG IR TRETMENT, UXILIRY, VCUUM, ND FLUORORES PRODUCTS MNIFOLD REGULTORS MNIFOLD REGULTORS CONTENTS Features, Flow Rate Characteristics 115 Specifications, Port Size 116 Inner Construction,
Series 10-ZSE40A(F)/10-ISE40A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High Precision Digital Pressure Switch How to Order For positive pressure Clean series For vacuum/ compound pressure 01 N01 W1 10 Rated pressure range ISEA
Series AN /Series AMC
s/exhaust Cleaner / Noise reduction Nominal filtration rating (Reference values) Oil mist removal ratio Standard type Low back pressure Compact and easy mounting 00 30 db (A) 00 µm 50 µm 5-0- Compact type
ZFC Series. Air Suction Filter. In-line Type with One-touch Fittings
Air Suction Filter ZFC Series N402 IN/OUT straight piping Lightweight molded resin parts Cartridge type element replacement One-touch fittings for easy installation and removal Series ZFC An in-line type
2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type (ISE75H) 2-color digital. Functions
Series ISE70/75/75H NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red Green
Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4
Type of actuation 4 Piping 0 Side ported Bottom ported 4 Without sub-plate Large Size 5 Port Solenoid Valve Rubber Seal Series 50/4 70 Series VP 5 port solenoid valve 5 7 position single position double
Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
2-Color Display Digital Pressure Switch. NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. Rated Pressure Metal Body Type
Series ISE70/75/75H New NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red
Manifold Regulator Modular Type. Regulator for manifold. Body size. Number of stations stations. 10 stations. Standard Specifications
Manifold Regulator Modular Type /3000 Series modular type that can be freely mounted on a manifold station. Optimal for central pressure control. Easily set up using the new knob. lso has a One-touch lock
9.8 mm. Digital Pressure Switch. 3-step setting. RoHScompliant. Series ZSE10(F)/ISE10. Vertical mounting space reduced to approx.! Reduced in depth!
Digital Pressure Switch Series ZSE1(F)/ISE1 Low profile 26.1mm 9.8 mm 13.5 mm 53.4 mm Reduced in depth! (Actual size) RoHScompliant Vertical mounting space reduced to approx.! 1 2 Position Detection Switch
3 Port Direct Operated Poppet Rubber Seal. Standard Continuous duty Energy saving Vacuum Energy saving/vacuum
3 Port Direct Operated Poppet Rubber Seal Series 307 Large Flow Capacity, yet Compact Size. Dimensions (W X H X D) 30 X 54.5 X 33 307 Nl/min 206.02 or more, 1/4 Low Power Consumption /VO307 4.8W DC/Standard
13 msec (at 500 mm )/18.5 msec (at 1000 mm )
Vacuum / Release Unit Series VQD1000-V Rubber Seal Response speed 13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Distance from the unit to the work area [Option] Smooth detachment of a work piece without
VCHR Series. Direct Operated Regulator for 6.0 MPa (Relieving Type) Service life: 10 million cycles. How to Order
Direct Operated Regulator for 6.0 MPa (Relieving Type) VCHR Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high pressure
Standard Specifications. Model. Indication precision. Clear cover. Brass Mass (kg) Bourdon tube. Model (Standard) Model G (2) G27-10-R1
Pressure Gauge for General Purpose Series G5/G27 G5 G27 G5-0-0 G27-0- Be sure to read the precautions on page 663 for selection and mounting. Dimensions Port size () precision ±5% F.S. (Full span) Case