ASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 ASP330F-N01 ASP430F-N02 ASP530F-N03 ASP630F-N04

ASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4

Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing

Port size. Part no. M5 x 0.8 R 1/8 R 1/4 R 1/4 R 3/8 R 1/ UNF NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2. Specifications

Dual Speed Controller with One-touch Fitting Series D RoS Enables bi-directional flow control. Unrestricted 3 tube mounting direction. odel Part no. D23F-5 D33F-1 D43F-2 D53F-2 D53F-3 D3F-4 D23F-U/32 D33F-N1

Port size AK AK AK AK /04 AK /10. Specifications

Check Valve AK Series RoS arge flow capacity ow cracking : 0.02 Pa A wide variation of models AK2000-01 AK2000-02 AK000-02 1 8 1 1 dm /(s bar). 9. Critical ratio Weight (g) 0 1 AK000-0 8 0.2 10 AK000-0

Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications

Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube

Speed Controller with One-touch Fitting

Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle

Speed Controller with One-touch Fitting

Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction

Port size in the cylinder side M5,10-32UNF M5,10-32UNF M3, M5,10-32UNF 1 8, 1 4, M3, M5,10-32UNF M5,10-32UNF 4, M5,10-32UNF 4, 8 564

Speed Controller with One-touch Fittings, Standard Type Sealant/ Gasket seal Sealant/ Gasket seal With Indicator/ With Indicator/ With Indicator/ With Indicator/ Flame Resistant (Equivalent to UL-94 Standard

Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.

Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape

How to Order. M5 M5 x 0.8 U10/ UNF

Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type

Flow Control Equipment

Flow Control Equipment Speed Controller (With One-touch Fittings, Standard Style) Metering Valve with Silencer, Quick Exhaust Valve, Check Valve Safety Speed Control Valve Speed Controller with One-touch

Speed Controller with Indicator

Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1

Miniature Regulator Series ARJ310

Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates

Port size in the cylinder side M 3 M 5 1 8, 1 4, M 3 M 5 M M 5

Best 6 Pneumatics Speed Controller with One-touch Fittings, Standard Type Flame Resistant (Equivalent to UL-94 Standard V-0) Panel mount type with Uni One-touch fitting AS2 F AS2 F AS22 F AS32 F AS42 F

Related Products VR4151/4152 Relay Valve

Related Products VR4151/4152 Relay Valve Appropriate output sequences are affected according to the signal received from the machanical valve. Specifications 1 Fluid Air Operating pressure 0 to 1.0MPa

Speed Controller with Indicator

Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! Indicator window Body size Body size or larger Indicator window Number

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110

Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902

Transmitters: Relay Valve VR4151/4152

Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2

45% 6.5 mm. 6 mm. 4 mm. Compact Cylinder. Compact. lighter. JCQ Series CAT.ES20-239C. Weight. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Compact Cylinder ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS Compact Both ends tapped mounting added. New s ø80, ø100 added. Port thread types NPT, G added. Overall length shortened 10 mm stroke

Speed Controller High Flow

http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Speed Control Valve for High Speed Cylinder High Flow Speed Control Valve for Actuator. High Flow Type with Same Size as. Suitable for

Specifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette

Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D.

Transmitters: Relay Valve

Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications

Specifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette

Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing

Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.

Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer

H/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications

Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance

Push-In Fitting Type Quick Exhaust Valve

http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Valve Valve 482 Suitable for High-Speed Cylinder. Standard Valve is equipped with Silencer. Re-adjustment of exhaust

Exhaust Throttle (Needle) Valve ET

http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Exhaust Throttle (Needle) Valve Exhaust Throttle (Needle) Valve ET 494 Exhaust Throttle (Needle) Valve with Silencer. Directly Connectable

Standard Specifications

Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube

Miniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure

Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing

AS Series. 4.0 g. Weight: Approx. 27% lighter. Flow Rate Reproducibility. Larger Knob. Easy Identification of Product Type. 5.5 g.

Speed Controller with One-touch Fittings In-line In-line Type y Easo t use RoHS Brass Stainless steel Reduces flow setting time! Push-lock type Knob O.D.: Almost doubled! Easy to lock ø9.4 Unlock ø5 Lock

Check Valve with One-touch Fitting. Male Connector Type Can be mounted directly onto equipment. Can be used for vacuum ( 100kPa)

N7 K/KB Series Check with One-touch Fittin ale Connector Type Can be mounted directly onto equipment Bushin Type Can be used in applications with splashin coolant and spatter, etc. Straiht Type Easily

For material handling and clamping of small workpieces

For material handling and clamping of small workpieces Power Clamp Cylinder New ø25, ø32 Compact Type INFORMATION 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight :

Flow control equipment

7 Check valve Flow controller Adjustable flow controller Adjustable speed controller 1 2 OR valve 1 1 2 AND valve 1 1 2 Quick exhaust valve 1 2 Flow control equipment Contents AS speed controller Protected

Standard Specifications

Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube

Multi-Circuit Rotary Block

http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multi-Circuit Block for Rotating Applications Multi-Circuit Rotary Block 302 Make to Order Suitable for Low-Speed Rotating Applications

Standard Specifications

Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube

Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck

O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.

Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications

Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening

Standard Specifications. Model IN side OUT side Fluid Proof pressure Maximum operating pressure

Miniature Regulator Series ARJ1020F 2 Construction/Dimensions Lock nut M8 X 0.75 Panel screw Panel mounting hole Precautions Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety

Insert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly

Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube

Miniature Fittings Stainless Steel 316. Hose nipple. Barb. Configuration for easy insertion into the tube Holds the tube tightly.

iniature Fittings Stainless Steel 316 Series S RoHS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose

Specifications VH600. Ambient temperature and operating fluid temperature. Operating angle Lubrication. Semi-standard

Hand Valve Series VH Specifications Fluid Proof pressure Max. operating VH00/00/00 pressure VH00 Ambient temperature and operating fluid temperature Air.5 MPa.0 MPa MPa -5 to 0 C (No freezing) VH0 VH00

Standard Specifications. Fluid Standard specifications. VH600 Ambient and fluid temperature Operating angle Lubrication. Optional Specifications

Hand Valve Series Standard Specifications Fluid Standard specifications Max.operating,, pressure Ambient and fluid temperature Operating angle Lubrication Air.5MPa.MPa MPa 5 to C (No freezing) 9 Not required/when

One-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal

Stainless Steel One-touch Fittings etal material: Stainless steel 303 RoS Improved tube insertion/removal Insertion : force ax. 30% reduction ax. Removal : force 20% reduction : Tube removal strength is

AN 00/AN 02/AN 03/25/AN

Silencer AN 00/AN 02/AN 03/25/AN Standard Series AN 00 Over 30dB(A) noise reduction Low back pressure Compact and easy mounting High noise reduction style Series AN 02 Over 35dB(A) noise reduction Case

PVC Quick Drain Valve

PVC Quick Drain Valve LVW Series Complies to JIS standard for polyvinyl chloride piping (JIS K 6742) Applicable fluids: Deionized water, Chemical liquids Application Example Cleaning Equipment Process

SPEED CONTROLLERS WITH QUICK FITTINGS

SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow

Transmitters: Relay Valve VR4151/4152

Transmitters: Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 JIS Symbol Precautions Be sure to read before handling.

Check Valve Series AK How to Order

High flow capacity Low cracking pressure:.2mpa Check Valve Series AK How to Order N AK 2 2 Compact and light weight Area Code Japan, Asia, Nil Australia, UK N U.S.A. 2 4 6 Body size /4 /2 /8 2 /4 3 3/8

Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications

iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small

Stainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut

Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release

Connector Series. Multiple Push-In Fitting Type. Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band.

http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multiple Push-In Fitting Type Connector 4 Desorption of Several Tubes at One Time. Combinable Connectors by Connector Band. Combinable

Series VCHR. Direct Operated Regulator for 6.0 MPa (Relieving Type) Service life: 10 million cycles. How to Order

Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane

Guide Table. MGF Series

Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

Compact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting

Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both

Tubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated

iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing

Pressure measurements can easily be taken any time, anywhere. POWER LIGHT

Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...

FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)

Main Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching

http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with

Throttle (Needle) Valve Standard Series

http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Throttle (Needle) Valve Throttle (Needle) Valve Standard 448 Control Actuator Speed or Pneumatic Signals. Adjustable

Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication

Hand Valve VH Series VH0 Specifications VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110

Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 48 x 91 VR4151 VR4152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902

CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting

1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How

Series CYP. Clean rodless cylinder ø15, ø32. How to Order

Series Clean rodless cylinder ø15, ø32 How to Order ir cylinder Clean rodless cylinder ore size (mm) 15 32 15 Cylinder bore size 15 15mm 32 32mm TN TF Port type M5 x 0.8 15 c NPT Standard stroke Standard

HMV/HSV. Manual selector valve. 4-port valve CONTENTS

4-port valve Overview The / series manual selector valves are 4-port valves with a sliding valve method for the main valve. Suitable for operating cylinders of φ0 to φ0. Features Simple ease of operation

Throttle (Needle) Valve PP Series

http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Flow Control Valve for Clean Environment Throttle (Needle) Valve 466 Copper alloy free material Nongrease Clean-room

Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. 3 (Closed center) 3/4, 1 3 (Exhaust center)

Hand Valve Series VH Specifications VH VH Fluid Proof pressure Max. operating VH// pressure VH Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa. MPa MPa 5 to C

3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot

3 Port Solenoid Valve Pilot Operated Poppet Type Series VG342 Rubber Seal [Option] Low power consumption 4.8 W DC (Standard type) 2 W DC (Energy-saving type) No lubrication required Possible to use in

Guide Table. ø40, ø63, ø100

Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

Miniature Fittings Series M

Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in. Flow characteristics (1) 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)

For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model 2 position 3 position

Series CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch

ylinder with Lock ouble Acting, Single Rod Series S ø1, ø, ø ow to Order Without auto switch With auto switch S S L L 1 1 1 1 - X16 - X16 uilt-in magnet L 1 ounting style asic style oot style Rod side

ARM1000/2000. Standard Specifications

.5- Regulator Manifold ARM000/000 4 connection methods Standard Specifications Fluid Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Cracking pressure (Valve) Construction

For Pneumatic Piping/Fittings & Tubing Prior to Use

For Pneumatic Piping/Fittings & Tubing Prior to Use Fittings with Sealant Seal material (fluororesin) is coated on the thread part to the proper thickness and within the proper coating range, which reduces

10 million cycles. Improved durability. Shock Absorber/Soft type. RJ Series. Maximum operating cycles M6, M8, M10, M14, M20, M27

Shock Absorber/Soft type Series M, M, M, M, M, M Improved durability RoS Long-term continuous operation has been realized by employing the pre-load mechanism, newly-developed oil seals. Maximum operating

Clean Regulator. SRH Series. Contamination controlled stainless steel regulator ARJ

Clean Regulator Series IR IRV VEX SRP ITV IC T AP1 Contamination controlled stainless steel regulator 855 Clean Regulator Series Contamination controlled stainless steel regulator Oil free Outstanding

Conventional specification. External Pilot air specification 0 ~ 0.7. Compact, yet keeps large capacity.» Limited space can be utilized.

Compact, yet keeps large capacity.» Limited space can be utilized. Standard.» SVR 10 series takes over the functions (Valve variations) of discontinued SVA 10 series. Pneumatic Symbols 5(R) 5(R) 5(R) 5(R)

Mini Free Mount Cylinder

Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

Series CXS ø6, ø10, ø15, ø20, ø25, ø32

Variations Bore size Dual Rod Cylinder Series CXS ø6, ø, ø15, ø, ø25, ø32 Dual rod cylinder unit with guide function for pick & place applications Twice the thrust Through the adoption of dual rod construction,

2-Colour Display Type High-Precision Digital Pressure Switch Series ZSE30/ISE30 How to Order Option 1 Without lead wire Nil Lead wire with connector (Lead wire length: 2m) L For positive pressure For vacuum/low

Soft Start-up Valve. AV2000/3000/4000/5000 Series

Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off

Series AV2000/3000/4000/5000

Soft Start-up Valve Series AV/3/4/5 Series introduced! A start-up valve that gradually increases supply pressure during start up and rapidly exhausts system air when the supply air is shut off AC AV AU

Series SY3000/5000 Base Mounted Manifold Stacking Type/DIN Rail Mounted Connector Box 24V. D side D. Blanking plate assembly SX A

Type N SY/ ase ounted anifold Stacking Type/DIN Rail ounted Connector ox How to Order anifold SSY SY SY Specifications Symbol Specifications With connector box (CO spec.) N With connector box ( CO spec.)

ICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated

ICOS - /, / or 5/ Exia poppet valves > > Port size: /... / (ISO G/NPT) /... (Flanged) > > Zone 0, Exia solenoid pilot operated valve > > Safety integrity level and > > Reliable and long life, ideal for

Pressure Relief 3 Port Valve With Locking Holes

Doc. No. VH*-OMQ0023-B PRODUCT NAME Pressure Relief 3 Port Valve With Locking Holes MODEL / Series / Product Number VHS20-(F,N)01~02A,B(-B,S)(-K,R,Z) VHS30-(F,N)02~03A,B(-B,S)(-K,R,Z) VHS40-(F,N)02~04A,B(-B,S)(-K,R,Z)

Information. Electric Actuator/Rod Type. Added size 63 to the LEY series! Series LEY AC Servo Motor (400 W) Size: 63. RoHS

Information SC Corporation Akihabara UDX 1F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 1-21, JAPAN http://www.smcworld.com 12 SC Corporation All Rights Reserved Electric Actuator/Rod Type Series EY AC Servo

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

F LOW CONTROL EQUIPMENT SPEED CONTROLLERS ACCESSORIES MOUNTING BRACKET NOW ALSO WHITE AS2001F AS2051F AS3001F AS4001F ORDER LINES

F LOW CONTROL EQUIPMENT 3-3 SPEED CONTROLLER WITH ONE TOUCH FITTINGS: IN-LINE TYPE SERIES AS1001F, 2001F, 2051F, 3001F, 4001F Minimises installation time and cost Accepts nylon and polyurethane tubing

10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry

Series 0-VQ00 port solenoid valve How to Order Valves 0 VQ 0 F ir cylinder Clean series Series VQ Compact port valve Type of actuation Normally closed Note) Normally open Note) Normally open type is available

Two Hand Control Valve

Two Hand Control Valve Series n output is available through synchronized, twohanded operation (within 0.5 s)! Conforming to EN574 RoHS (Interchangeable with XT92-67 ) Example of a basic circuit diagram

Tube Applicable for nylon, soft nylon and polyurethane tubing.

Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

The manifolds can be powered through various fieldbus systems, multipole or common terminals.

Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level

5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)

For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series VFS3000 Model position 3 position

Power Valve: Economy Valve. Standard Specifications. Model VEX55-04

Three functions (pressure regulator, switching valve, and speed controller) are provided by a single valve. The conventional valve combination circuit has been condensed into a single valve. A large capacity

How to Order. Body size

Standard Type Series N 00 Over 30 db () noise reduction Low back pressure Compact and easy mounting How to Order N 400 04 Body size 200 300 400 500 600 700 800 900 Thread type Symbol Type Nil R N NPT Symbol

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions

Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one

Compact Guide Cylinder

Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve

5.0 MPa Pilot Operated /3 Port Solenoid Valve & Check Valve VCH Series VCH4/4: Port VCH40: 3 Port VCHC40: Check Valve Pilot Operated Port Solenoid Valve [Option] VCH40 Series Stable responsiveness Response

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular

Rectangular Multi-connector. No. of Connecting Tubes: 10, 20. Plate. Plug connector Socket connector PAT.PEND

Rectangular Multi-connector KDM Series No. of Connecting Tubes: 1, 2 RoHS Multi-connector is effective in saving labor for separate transportation of the panel and the machine, and for exchanging units