Speed Controller with Indicator

Transcription

1 Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1 1 Indicator window Body size 1 Indicator window 1 2 Number of needle rotations 1 2 Body size 2 or larger Indicator window 1 2 Number of needle rotations 1 2 Numerical indication of knob rotations indicator window directions available Indicator window direction: 0 Indicator window direction: 180 Indicator window direction: 90 Indicator window direction: 270 New series added! Universal type Indicator window direction: 90 /270 Wide viewing angle S-FS Series CT.ES20-229D

2 Speed Controller with Indicator S-FS Series 4 indicator window directions offer improved visibility Inspection and maintenance labor can be reduced by selecting the indicator window direction suitable for the operating conditions. In addition, the flexibility of equipment design has been improved. Current model It's hard to see the numerical indication. This is hard to operate... Indicator window direction: 0 Indicator window direction: 180 The numerical indication can be checked without looking into the controller. Indicator window direction: 90 Indicator window direction: 270 Larger push-lock type knob Easy to lock The larger knob and marking of every 90 mark allows for easier operation Locked Unlocked Body size ød (Port size 1/8) 13 (Port size 1/4) ød Push-lock type ø9.4 mm ø12 mm (Port size 1/8) ø13 mm (Port size 1/4) ø16.6 mm ø18.8 mm ctual size Easy to turn large knob Easy to make fine adjustments 1

3 Speed Controller with Indicator S-FS Series Improved reproducibility of flow rate Fully closed Stopper face Contact face stopper Stable knob position when fully closed (no flow rate) onto the contact face stopper (rotating stopper) Minimal flow rate variations between knob rotations Easier to insert and remove the tube 13.9 mm ctual size 8.7 mm 17.1 mm ctual size 12.2 mm S-FS Series Current model S-FS Series Current model Tubing diameter ø4 Thread M5 Part number S12 1FS-M5-04 Part number S12 1F-M5-04 Tubing diameter ø6 Thread 1/4 Part number S22 1FS-02-06S Part number S22 1F Easy identification of product type Series Meter-out Meter-in Release button color Metric Inch Gray Light blue Light gray Orange S-FS S-FS-U Gray Light blue White White S-FSG 2

4 Speed Controller with Indicator S-FS Series Series Variations Seal method Gasket seal Body size 1 Port size M5 x UNF pplicable tubing O.D. Metric size Inch size /8" 5/32" 1/4" 5/16" 3/8" 1/2" *1 *1 Metal parts material pplicable tubing material Sealant Face seal 1/8 2 1/4 R 1/4 3 NPT 3/8 4 1/2 1/8 2 1/4 G 1/4 3 3/8 4 1/2 *1 *1 *1 *1 *1 *1 *1 Brass/ Steel wire Stainless steel Nylon (T,TI Series) Soft nylon (TS,TIS Series) Polyurethane (T,TIUB Series) Fluoropolymer (TLM,TILM Series) (TH,TIH Series) Gasket seal 2 3 Uni 1/8 1/4 1/4 3/8 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 Brass/ Steel wire 4 1/2 *1 *1 *1 *1 *1 The electroless nickel plating type has been standardized. The stainless steel type has been standardized. The G thread (Face seal) type has been standardized. *1 The universal type is not available. Restrictor (Made to Order a p. 15, 27 ) Flow control of air blow and air purge Grease-free (Seal: Fluorine-coated) + Restrictor (Without check valve) -X21 Restrictor (Without check valve) -X214 3

5 Model Speed Controller with Indicator (Elbow Type / Universal Type) S-FS Series Elbow Universal RoHS Brass 1 Electroless nickel plated S-FS pplicable tubing O.D. *3 Model Port size Seal method Metric size Inch size Max. number of 2* /8" 5/32" 1/4" 5/16" 3/8" 1/2" rotations S1ll1FSl-M5l M5 x 0.8 V*4 V V V V V V Gasket seal S1ll1FSl-U10/32l 10-32UNF V*4 V V V V V V 8 S2ll1FSl-l01 1/8 V V V V V*4 V V V V S2ll1FSl-l02 1/4 V*4 V V V V V*4 V V V V S3ll1FSl-l02 R NPT 1/4 Sealant*1 V V V V V V V S3ll1FSl-l03 3/8 V V V V V V V S4ll1FSl-l04 1/2 V V V*4 V V S2ll1FSl-G01 1/8 V V V V V*4 10 S2ll1FSl-G02 1/4 V*4 V V V V S3ll1FSl-G02 G 1/4 Face seal V V V V S3ll1FSl-G03 3/8 V V V V S4ll1FSl-G04 1/2 V V V*4 *1 Without sealant type can be selected as a standard option. *2 Only polyurethane tubing is applicable for ø2. *3 There are differences in actual rate as by the indicator window over the maximum number of rotations depending on the individual product. *4 The universal type is not available. Flow Direction Symbols on Body Meter-out Meter-in Symbol Specifications Fluid ir Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa mbient and fluid temperature 5 to 60 C (No freezing) pplicable tubing material Nylon, Soft nylon, Polyurethane*1, FEP, PF *1 Use caution at the max. operating pressure when using soft nylon or polyurethane tubing. (For details, refer to the Web Catalog.) S-FSG Uni-S-FS Caution Be sure to read this before handling the products. Refer to the back cover for safety instructions. For flow control equipment precautions, refer to the Handling Precautions for SMC Products and the Operation Manual on the SMC website: Flow Rate and Sonic Conductance Model S1ll1FS-M5l S2ll1FS-01 S2ll1FS-02 S3ll1FS S4ll1FS Tubing O.D. C values: Sonic conductance dm 3 /(s bar) b values: Critical pressure ratio Metric size Inch size Free flow Controlled flow Free flow Controlled flow ø2 ø3.2 ø4 ø6 ø3.2 ø4 ø1/8" ø1/4" ø1/8" ø5/32" ø5/32" ø6 ø8 ø10 ø1/4" ø5/16" ø3.2 ø4 ø6 ø1/8" ø5/32" ø8 ø10 ø1/4" ø5/16" ø3/8" * 10-32UNF has the same specification as M5. * C and b values are for controlled flow with the needle fully open and free flow with the needle fully closed. ø6 ø8 ø1/4" ø5/16" ø10 ø12 ø10 ø12 ø16 ø3/8" ø3/8" ø1/2"

6 S-FS Series Elbow Universal Brass 1 Electroless nickel plated How to Order 1 Body size M5 x UNF Width across flats (H) E 8 mm Nil 9 mm Port size M5 M5 x 0.8 U10/ UNF pplicable tubing O.D. *1 Metric size 02 ø2 Inch size 01 ø1/8" 23 ø3.2*2 03 ø5/32" 04 ø4 07 ø1/4" 06 ø6 *1 For selecting applicable tubing O.D., refer to the Model on page 4. Metric size and inch size types can be visually identified by color of the release button. Metric size: Light gray Inch size: Orange *2 Use ø1/8" tubing. Body size 1 S F S M5 E 06 Body size 2/3/4 S F S S Nil Indicator window Body size 2 1/8, 1/4 3 3/8 4 1/2 Indicator window Type 2 Elbow 3 Universal With indicator Control type *1 0 Meter-out 1 Meter-in *1 Meter-out and meter-in types can be visually identified by color of the knob. Meter-out: Gray Meter-in: Light blue Indicator window direction Elbow Universal Indicator window Thread type Nil R N NPT G G Made to Order Refer to page 15 for details. Seal method Nil Without sealant S With sealant * Face seal type is used for the G thread type. Select Nil/Without sealant. Example) S2201FS-G01-06 pplicable tubing O.D. *1 Metric size Inch size*3 23 ø3.2*2 01 ø1/8" 04 ø4 03 ø5/32" 06 ø6 07 ø1/4" 08 ø8 09 ø5/16" 10 ø10 11 ø3/8" 12 ø12 13 ø1/2" 16 ø16 *1 For selecting applicable tubing O.D., refer to the Model on page 4. *2 Use ø1/8" tubing. *3 Only the metric size is available for the G thread type. Port size 01 1/8 02 1/4 03 3/8 04 1/ Indicator window * Orientation of indicator direction is fixed when manufacturing, and cannot be changed by the user. In addition, the universal type is only available with 180 setting. Symbol Made to Order (For details, refer to page 15.) Specifications -X12 Lubricant: Vaseline -X21 Grease-free (Seal: Fluorine-coated) + Restrictor (Without check valve) -X214 Restrictor (Without check valve) 10- Clean series

7 Speed Controller with Indicator S-FS Series Needle Valve: Flow Rate Characteristics S1 01FS -M5, S1 11FS -M5 S2 01FS -01, S2 11FS -01 S2 01FS -02, S2 11FS -02 Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 01, 23, 03, 04, 06, Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 06, 07, 08, 09, 10 03, 04 01, 23 Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 08, 09, 10, 11 06, 07 03, 04 01, 23 S-FS Number of needle rotations -U10/32 has the same specification as M Number of needle rotations Number of needle rotations S-FSG S3 01FS, S3 11FS S4 01FS, S4 11FS Inlet pressure: 0.5 MPa Inlet pressure: 0.5 MPa Flow rate [L/min (NR)] , 11, 12 08, 09 06, 07 Flow rate [L/min (NR)] , 13, 16 10, 11 Uni-S-FS Number of needle rotations Number of needle rotations * The numbers above the flow rate characteristic curves in the charts show the applicable tubing outside diameter as defined by the product number. 6

8 S-FS Series Construction: Elbow Type Seal method: Gasket seal For M5, 10-32UNF o!0!1 e!3!4!2!5 q t u i r y Seal method: Sealant For R, NPT thread o!0!2!1 e!3!4!5 q t r u i y Meter-in Meter-out!6 w Meter-in Meter-out w Seal method: Face seal For G thread o!0!1 e!3 Meter-in Meter-out!4!2!5 q t u i r y!7 w Component Parts No. Description Material Note 1 Body PBT 2 Body B Brass Electroless nickel plating 3 Knob POM 4 Needle PBT 5 Needle guide Brass Electroless nickel plating 6 U-seal HNBR 7 O-ring NBR 8 O-ring NBR 9 Cassette 10 Seal NBR 11 Bonnet POM 12 Bonnet B POM 13 Gear POM 14 Indicator gear POM 15 Clip Stainless steel 16 Gasket NBR/Stainless steel 17 Seal NBR 7

9 Speed Controller with Indicator S-FS Series Construction: Universal Type Seal method: Gasket seal For M5, 10-32UNF!1!2!3 w!0!5!7 r!6!4!8 t y q i o e u!9 Seal method: Sealant For R, NPT thread!1!2 w!0!5!7 r!6!4!8 t y q i o e u S-FS S-FSG Meter-in Meter-out Meter-in Meter-out Seal method: Face seal For G thread!1!2!5!7 r!6!4!8 Uni-S-FS w!0 Meter-in Meter-out t y q i o u Component Parts No. Description Material Note 1 Body PBT 2 Elbow body PBT 3 Body B Brass Electroless nickel plating 4 Knob POM 5 Needle PBT 6 Needle guide Brass Electroless nickel plating 7 U-seal HNBR 8 O-ring NBR 9 O-ring NBR 10 O-ring NBR 11 Cassette 12 Seal NBR 13 Spacer PBT ø3.2 and ø1/8" only 14 Bonnet POM 15 Bonnet B POM 16 Gear POM 17 Indicator gear POM 18 Clip Stainless steel 19 Gasket NBR/Stainless steel 20 Seal NBR 8

10 S-FS Series Dimensions: Elbow Type Seal method: Gasket seal For M5, 10-32UNF W1 ød3 Indicator window direction: 0 Indicator window direction: 180 W2 X Y pplicable tubing O.D. ød L3 L4 ød1 H (Width across flats) M L1 L2 T Metric Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 M W1 W2 X Y Weight S12l1FSl-M5E-02 S12l1FSl-U10/32E S12l1FSl-M5E S12l1FSl-U10/32E-23 M5 x S12l1FSl-M5E-04 10/32UNF S12l1FSl-U10/32E-04 S12l1FSl-M5E-06 S12l1FSl-U10/32E *1 Reference dimensions *2 Reference dimensions of threads after installation Inch Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 M W1 W2 X Y Weight S12l1FSl-M5E-01 1/8" S12l1FSl-U10/32E S12l1FSl-M5E-03 M5 x 0.8 5/32" S12l1FSl-U10/32E-03 10/32UNF 7 S12l1FSl-M5E-07 S12l1FSl-U10/32E-07 1/4" *1 Reference dimensions *2 Reference dimensions of threads after installation 9

11 Speed Controller with Indicator S-FS Series Dimensions: Universal Type Seal method: Gasket seal For M5, 10-32UNF W1 ød3 ød1 pplicable tubing O.D. ød Y L4 ød2 L5 S-FS S-FSG L3 M H (Width across flats) T L1 L2 Metric Size Model d T H D1 D2 D3 L1 L2 L3 L4 S13 1FS1-M5E-23 S13 1FS1-U10-32/23 S13 1FS1-M5E-04 S13 1FS1-U10/32-04 S13 1FS1-M5E-06 S13 1FS1-U10/32-06 L5 M W1 Y Weight M5 x /32UNF Uni-S-FS Inch Size Model d T H D1 D2 D3 L1 L2 L3 L4 S13 1FS1-M5E-01 S13 1FS1-U10/32-01 S13 1FS1-M5E-03 S13 1FS1-U10/32-03 S13 1FS1-M5E-07 S13 1FS1-U10/ /8 M5 x 0.8 5/ /32UNF L5 M W1 Y Weight /

12 S-FS Series Dimensions: Elbow Type Seal method: Sealant For R, NPT thread W1 ød3 Indicator window direction: 0 Indicator window direction: 180 W2 X Y pplicable tubing O.D. ød L3 L4 ød1 M H (Width across flats) L1 T Metric Size L2 Model d T L4*1 *2 H D1 D3 L1 L2 L3 M W1 W2 X Y Weight (R, NPT) S22 1FS (S) (13) S22 1FS (S) S22 1FS (S) 6 1/ (13) (12.7) S22 1FS (S) (14) S22 1FS (S) (15) S22 1FS (S) (30.3) S22 1FS (S) (24) 17 S22 1FS (S) 6 1/ (32.8) (17.5) S22 1FS (S) (33.3) (25) S22 1FS (S) (36.3) (26) S32 1FS (S) (48) S32 1FS (S) / S32 1FS (S) (39) S32 1FS (S) (51) S32 1FS (S) (39) S32 1FS (S) / S32 1FS (S) (40) S32 1FS (S) (42) S42 1FS (S) (40.2) (61) 24 S42 1FS (S) 12 1/ (43.6) (63) (23.8) S42 1FS (S) (47.6) (67) *1 Reference dimensions *2 Reference dimensions of threads after installation * The values in ( ) are for NPT thread. Inch Size Model d T L4*1 *2 H D1 D3 L1 L2 L3 M W1 W2 X Y Weight (R, NPT) S22 1FS (S) 1/8" (13) S22 1FS (S) 5/32" / S22 1FS (S) 1/4" (12.7) (13) S22 1FS (S) 5/16" (14) S22 1FS (S) 1/8" (30.3) 23 (24) S22 1FS (S) 5/32" S22 1FS (S) 1/4" 1/ (32.8) (24) (17.5) S22 1FS (S) 5/16" (33.3) (25) S22 1FS (S) 3/8" (35.8) (26) S32 1FS (S) 1/4" S32 1FS (S) 5/16" 1/ (48) S32 1FS (S) 3/8" (49) S32 1FS (S) 1/4" S32 1FS (S) 5/16" 3/ (39) S32 1FS (S) 3/8" (40) S42 1FS (S) 3/8" (40.2) (61) 1/ S42 1FS (S) 1/2" (23.8) (43.7) (63) *1 Reference dimensions *2 Reference dimensions of threads after installation * The values in ( ) are for NPT thread. 11

13 Speed Controller with Indicator S-FS Series Dimensions: Universal Type Seal method: Sealant For R, NPT thread W1 ød3 ød1 pplicable tubing O.D. ød Y L4 ød2 L5 S-FSG L3 S-FS M H (Width across flats) T L1 L2 Metric Size Model d T H D1 D2 D3 L1 L2 L3 L4 L5 M W1 Y Weight S23 1FS (S) S23 1FS (S) / S23 1FS (S) 6 (12.7) S23 1FS (S) S23 1FS (S) S23 1FS (S) / S23 1FS (S) 8 (17.5) S23 1FS (S) S33 1FS (S) S33 1FS (S) / S33 1FS (S) S33 1FS (S) S33 1FS (S) S33 1FS (S) / S33 1FS (S) S33 1FS (S) S43 1FS (S) / S43 1FS (S) 12 (23.8) Uni-S-FS Inch Size Model d T H D1 D2 D3 L1 L2 L3 L4 L5 M W1 Y Weight S23 1FS (S) 1/ S23 1FS (S) 5/ / S23 1FS (S) 1/4 (12.7) S23 1FS (S) 5/ S23 1FS (S) 5/ S23 1FS (S) 1/ / S23 1FS (S) 5/16 (17.5) S23 1FS (S) 3/ S33 1FS (S) 1/ S33 1FS (S) 5/16 3/ S33 1FS (S) 3/ S33 1FS (S) 1/ S33 1FS (S) 5/16 3/ S33 1FS (S) 3/ S43 1FS (S) 3/ / S43 1FS (S) 1/2 (23.8)

14 S-FS Series Dimensions: Elbow Type Seal method: Face seal For G thread W1 ød3 Indicator window direction: 0 Indicator window direction: 180 W2 X Y pplicable tubing O.D. ød L3 L4 ød1 H (Width across flats) M L1 L2 T Metric Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 Weight M W1 W2 X Y S22 1FS -G S22 1FS -G S22 1FS -G / S22 1FS -G S22 1FS -G S22 1FS -G S22 1FS -G S22 1FS -G / S22 1FS -G S22 1FS -G S32 1FS -G S32 1FS -G / S32 1FS -G S32 1FS -G S32 1FS -G S32 1FS -G / S32 1FS -G S32 1FS -G S42 1FS -G S42 1FS -G / S42 1FS -G *1 Reference dimensions *2 Reference dimensions of threads after installation 13

15 Speed Controller with Indicator S-FS Series Dimensions: Universal Type Seal method: Face seal For G thread W1 ød3 ød1 pplicable tubing O.D. ød Y L4 ød2 L5 S-FSG L3 M S-FS H (Width across flats) T L1 L2 Metric Size Model d T H D1 D2 D3 L1 L2 L3 L4 L5 M W1 Y Weight S23 1FS1-G S23 1FS1-G / S23 1FS1-G S23 1FS1-G S23 1FS1-G S23 1FS1-G / S23 1FS1-G S23 1FS1-G S33 1FS1-G S33 1FS1-G / S33 1FS1-G S33 1FS1-G S33 1FS1-G S33 1FS1-G / S33 1FS1-G S33 1FS1-G S43 1FS1-G / S43 1FS1-G Uni-S-FS 14

16 S-FS Series Made to Order Please contact SMC for detailed dimensions, specifications and lead times. Elbow Universal Brass 1 Electroless nickel plated 1 Lubricant: Vaseline -X12 X12 Example) S2201FS-01-04S-X12 2 Grease-free (Seal: Fluorine-coated) + Restrictor (Without check valve) -X21 X21 Example) S2201FS-01-04S-X21 Note 1) Not particle-free Note 2) The restrictor is only compatible with the part number of the meter-out type. Note 3) Only the needle and O-ring are fluorine-coated. Laser printing Laser printing 3 Restrictor (Without check valve) -X214 Example) S2201FS-01-04S-X214 Note) The restrictor is only compatible with the part number of the meter-out type. 4 Clean Series 10- Example) 10-S2201FS-01-04S Note 1) Fluorine grease is used. Note 2) The cleanliness class (ISO class) is X214 Laser printing Laser printing 15

17 1 Stainless Steel Type Speed Controller with Indicator (Elbow Type / Universal Type) S-FSG Series Elbow Universal RoHS Stainless steel S-FS Model pplicable tubing O.D. *3 Model Port size Seal method Metric size Inch size Max. number of 2* /8" 5/32" 1/4" 5/16" 3/8" 1/2" rotations S1ll1FSGl-M5 M5 x 0.8 V*4 V V V V V V Gasket seal S1ll1FSGl-U10/ UNF V*4 V V V V V V 8 S2ll1FSGl-l01 1/8 V V V V V*4 V V V V S2ll1FSGl-l02 1/4 V*4 V V V V V*4 V V V V S3ll1FSGl-l02 R NPT 1/4 Sealant*1 V V V V V V V S3ll1FSGl-l03 3/8 V V V V V V V S4ll1FSGl-l04 1/2 V V V*4 V V S2ll1FSGl-G01 1/8 V V V V V*4 10 S2ll1FSGl-G02 1/4 V*4 V V V V S3ll1FSGl-G02 G 1/4 Face seal V V V V S3ll1FSGl-G03 3/8 V V V V S4ll1FSGl-G04 1/2 V V V*4 *1 Without sealant type can be selected as a standard option. *2 Only polyurethane tubing is applicable for ø2. *3 There are differences in actual rate as by the indicator window over the maximum number of rotations depending on the individual product. *4 The universal type is not available. Flow Direction Symbols on Body Meter-out Meter-in Symbol Specifications Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature pplicable tubing material ir 1.5 MPa 1 MPa 0.1 MPa 5 to 60 C (No freezing) Nylon, Soft nylon, Polyurethane*1, FEP, PF *1 Use caution at the max. operating pressure when using soft nylon or polyurethane tubing. (For details, refer to the Web Catalog.) S-FSG Uni-S-FS Caution Be sure to read this before handling the products. Refer to the back cover for safety instructions. For flow control equipment precautions, refer to the Handling Precautions for SMC Products and the Operation Manual on the SMC website: Flow Rate and Sonic Conductance Model S1ll1FSGl-M5 S2ll1FSGl-01 S2ll1FSGl-02 S3ll1FSGl S4ll1FSGl Tubing O.D. C values: Sonic conductance dm 3 /(s bar) b values: Critical pressure ratio Metric size Inch size Free flow Controlled flow Free flow Controlled flow ø2 ø3.2 ø4 ø6 ø3.2 ø4 ø1/8" ø1/4" ø1/8" ø5/32" ø5/32" ø6 ø8 ø10 ø1/4" ø5/16" ø3.2 ø4 ø6 ø1/8" ø5/32" ø8 ø10 ø1/4" ø5/16" ø3/8" * 10-32UNF has the same specification as M5. * C and b values are for controlled flow with the needle fully open and free flow with the needle fully closed. ø6 ø8 ø1/4" ø5/16" ø10 ø12 ø10 ø12 ø16 ø3/8" ø3/8" ø1/2"

18 S-FSG Series Elbow Universal Stainless steel 1 How to Order Body size 1 M5 x UNF Port size M5 M5 x 0.8 U10/ UNF pplicable tubing O.D. *1 Metric size 02 ø2 Inch size 01 ø1/8" 23 ø3.2*2 03 ø5/32" 04 ø4 07 ø1/4" 06 ø6 *1 For selecting applicable tubing O.D., refer to the Model on page 16. Metric size and inch size types can be visually identified by color of the release button. Stainless steel type: White White is also used for inch size. *2 Use ø1/8" tubing. Body size 1 S F S G M5 06 Body size 2/3/4 S F S G S Body size 2 1/8, 1/4 3 3/8 4 1/2 Nil Type 2 Elbow 3 Universal With indicator Control type *1 0 Meter-out 1 Meter-in *1 Meter-out and meter-in types can be visually identified by color of the knob. Meter-out: Gray Meter-in: Light blue Stainless steel type * Metric size and inch size types can be visually identified by color of the release button. Stainless steel type: White * White is also used for inch size. Indicator window direction Elbow Universal Indicator window Indicator window Indicator window Made to Order Refer to page 27 for details. Seal method Nil Without sealant S With sealant * Face seal type is used for the G thread type. Select Nil/Without sealant. Example) S2201FSG-G01-06 pplicable tubing O.D. *1 Metric size Inch size*3 23 ø3.2*2 01 ø1/8" 04 ø4 03 ø5/32" 06 ø6 07 ø1/4" 08 ø8 09 ø5/16" 10 ø10 11 ø3/8" 12 ø12 13 ø1/2" 16 ø16 *1 For selecting applicable tubing O.D., refer to the Model on page 16. *2 Use ø1/8" tubing. *3 Only the metric size is available for the G thread type. Port size 01 1/8 02 1/4 03 3/8 04 1/2 Thread type Nil R N NPT G G Indicator window * Orientation of indicator direction is fixed when manufacturing, and cannot be changed by the user. In addition, the universal type is only available with 180 setting. Made to Order (For details, refer to page 27.) Symbol Specifications -X12 Lubricant: Vaseline -X21 Grease-free (Seal: Fluorine-coated) + Restrictor (Without check valve) -X214 Restrictor (Without check valve) 10- Clean series

19 Stainless Steel Type Speed Controller with Indicator S-FSG Series Needle Valve: Flow Rate Characteristics S1 01FSG -M5, S1 11FSG -M5 S2 01FSG -01, S2 11FSG -01 S2 01FSG -02, S2 11FSG -02 Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 01, 23, 03, 04, 06, Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 06, 07, 08, 09, 10 03, 04 01, 23 Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 08, 09, 10, 11 06, 07 03, 04 01, 23 S-FS Number of needle rotations -U10/32 has the same specification as M Number of needle rotations Number of needle rotations S-FSG S3 01FSG, S3 11FSG S4 01FSG, S4 11FSG Inlet pressure: 0.5 MPa Inlet pressure: 0.5 MPa Flow rate [L/min (NR)] , 11, 12 08, 09 06, 07 Flow rate [L/min (NR)] , 13, 16 10, 11 Uni-S-FS Number of needle rotations Number of needle rotations * The numbers above the flow rate characteristic curves in the charts show the applicable tubing outside diameter as defined by the product number. 18

20 S-FSG Series Construction: Elbow Type Seal method: Gasket seal For M5, 10-32UNF o!0!1 e!3!4!2!5 q t u i r y Seal method: Sealant For R, NPT thread o!0!2!1 e!3!4!5 q t r u i y Meter-in Meter-out!6 w Meter-in Meter-out w Seal method: Face seal For G thread o!0!1 e!3 Meter-in Meter-out!4!2!5 q t u i r y!7 w Component Parts No. Description Material Note 1 Body PBT 2 Body B Stainless steel 3 Knob POM 4 Needle PBT 5 Needle guide Stainless steel 6 U-seal HNBR 7 O-ring NBR 8 O-ring NBR 9 Cassette 10 Seal NBR 11 Bonnet POM 12 Bonnet B POM 13 Gear POM 14 Indicator gear POM 15 Clip Stainless steel 16 Gasket NBR/Stainless steel 17 Seal NBR 19

21 Stainless Steel Type Speed Controller with Indicator S-FSG Series Construction: Universal Type Seal method: Gasket seal For M5, 10-32UNF!1!2!3 w!0!5!7 r!6!4!8 t y q i o e u!9 Seal method: Sealant For R, NPT thread!1!2 w!0!5!7 r!6!4!8 t y q i o e u S-FS S-FSG Meter-in Meter-out Meter-in Meter-out Seal method: Face seal For G thread!1!2!5!7 r!6!4!8 Uni-S-FS w!0 Meter-in Meter-out t y q i o u Component Parts No. Description Material Note 1 Body PBT 2 Elbow body PBT 3 Body B Stainless steel 4 Knob POM 5 Needle PBT 6 Needle guide Stainless steel 7 U-seal HNBR 8 O-ring NBR 9 O-ring NBR 10 O-ring NBR 11 Cassette 12 Seal NBR 13 Spacer PBT ø3.2 and ø1/8" only 14 Bonnet POM 15 Bonnet B POM 16 Gear POM 17 Indicator gear POM 18 Clip Stainless steel 19 Gasket NBR/Stainless steel 20 Seal NBR 20

22 S-FSG Series Dimensions: Elbow Type Seal method: Gasket seal For M5, 10-32UNF W1 ød3 Indicator window direction: 0 Indicator window direction: 180 W2 X Y pplicable tubing O.D. ød L3 L4 ød1 H (Width across flats) M L1 L2 T Metric Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 M W1 W2 X Y Weight S12l1FSGl-M5-02 S12l1FSGl-U10/ S12l1FSGl-M S12l1FSGl-U10/32-23 M5 x S12l1FSGl-M /32UNF S12l1FSGl-U10/32-04 S12l1FSGl-M5-06 S12l1FSGl-U10/ *1 Reference dimensions *2 Reference dimensions of threads after installation Inch Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 M W1 W2 X Y Weight S12l1FSGl-M5-01 1/8" S12l1FSGl-U10/ S12l1FSGl-M5-03 M5 x 0.8 5/32" S12l1FSGl-U10/ /32UNF 7 S12l1FSGl-M5-07 S12l1FSGl-U10/ /4" *1 Reference dimensions *2 Reference dimensions of threads after installation 21

23 Stainless Steel Type Speed Controller with Indicator S-FSG Series Dimensions: Universal Type Seal method: Gasket seal For M5, 10-32UNF W1 ød3 ød1 pplicable tubing O.D. ød Y L4 ød2 L5 S-FS S-FSG L3 M H (Width across flats) T L1 L2 Metric Size Model d T H D1 D2 D3 L1 L2 L3 L4 S13 1FSG1-M5-23 S13 1FSG1-U10-32/23 S13 1FSG1-M5-04 S13 1FSG1-U10/32-04 S13 1FSG1-M5-06 S13 1FSG1-U10/32-06 L5 M W1 Y Weight M5 x /32UNF Uni-S-FS Inch Size Model d T H D1 D2 D3 L1 L2 L3 L4 S13 1FSG1-M5-01 S13 1FSG1-U10/32-01 S13 1FSG1-M5-03 S13 1FSG1-U10/32-03 S13 1FSG1-M5-07 S13 1FSG1-U10/ / / M5 x /32UNF L5 M W1 Y Weight /

24 S-FSG Series Dimensions: Elbow Type Seal method: Sealant For R, NPT thread W1 ød3 Indicator window direction: 0 Indicator window direction: 180 W2 X Y pplicable tubing O.D. ød L3 L4 ød1 M H (Width across flats) L1 T Metric Size L2 Model d T L4*1 *2 H D1 D3 L1 L2 L3 M W1 W2 X Y Weight (R, NPT) S22 1FSG (S) (13) S22 1FSG (S) S22 1FSG (S) 6 1/ (13) (12.7) S22 1FSG (S) (14) S22 1FSG (S) (15) S22 1FSG (S) (30.3) S22 1FSG (S) (24) 17 S22 1FSG (S) 6 1/ (32.8) (17.5) S22 1FSG (S) (33.3) (25) S22 1FSG (S) (36.3) (26) S32 1FSG (S) (48) S32 1FSG (S) / S32 1FSG (S) (49) S32 1FSG (S) (51) S32 1FSG (S) (39) S32 1FSG (S) / S32 1FSG (S) (40) S32 1FSG (S) (42) S42 1FSG (S) (40.2) (61) 24 S42 1FSG (S) 12 1/ (43.6) (63) (23.8) S42 1FSG (S) (47.6) (67) *1 Reference dimensions *2 Reference dimensions of threads after installation * The values in ( ) are for NPT thread. Inch Size Model d T L4*1 *2 H D1 D3 L1 L2 L3 M W1 W2 X Y Weight (R, NPT) S22 1FSG (S) 1/8" (13) S22 1FSG (S) 5/32" / S22 1FSG (S) 1/4" (12.7) (13) S22 1FSG (S) 5/16" (14) S22 1FSG (S) 1/8" (30.3) 23 (24) S22 1FSG (S) 5/32" S22 1FSG (S) 1/4" 1/ (32.8) (24) (17.5) S22 1FSG (S) 5/16" (33.3) (25) S22 1FSG (S) 3/8" (35.8) (26) S32 1FSG (S) 1/4" S32 1FSG (S) 5/16" 3/ (48) S32 1FSG (S) 3/8" (49) S32 1FSG (S) 1/4" S32 1FSG (S) 5/16" 3/ (39) S32 1FSG (S) 3/8" (40) S42 1FSG (S) 3/8" (40.2) (61) 1/ S42 1FSG (S) 1/2" (23.8) (43.7) (63) *1 Reference dimensions *2 Reference dimensions of threads after installation * The values in ( ) are for NPT thread. 23

25 Stainless Steel Type Speed Controller with Indicator S-FSG Series Dimensions: Universal Type Seal method: Sealant For R, NPT thread W1 ød3 ød1 pplicable tubing O.D. ød Y L4 ød2 L5 S-FSG L3 S-FS M H (Width across flats) T L1 L2 Metric Size Model d T H D1 D2 D3 L1 L2 L3 L4 L5 M W1 Y Weight S23 1FSG (S) S23 1FSG (S) / S23 1FSG (S) 6 (12.7) S23 1FSG (S) S23 1FSG (S) S23 1FSG (S) / S23 1FSG (S) 8 (17.5) S23 1FSG (S) S33 1FSG (S) S33 1FSG (S) / S33 1FSG (S) S33 1FSG (S) S33 1FSG (S) S33 1FSG (S) / S33 1FSG (S) S33 1FSG (S) S43 1FSG (S) / S43 1FSG (S) 12 (23.8) Uni-S-FS Inch Size Model d T H D1 D2 D3 L1 L2 L3 L4 L5 M W1 Y Weight S23 1FSG (S) 1/ S23 1FSG (S) 5/ / S23 1FSG (S) 1/4 (12.7) S23 1FSG (S) 5/ S23 1FSG (S) 5/ S23 1FSG (S) 1/ / S23 1FSG (S) 5/16 (17.5) S23 1FSG (S) 3/ S33 1FSG (S) 1/ S33 1FSG (S) 5/16 3/ S33 1FSG (S) 3/ S33 1FSG (S) 1/ S33 1FSG (S) 5/16 3/ S33 1FSG (S) 3/ S43 1FSG (S) 3/ / S43 1FSG (S) 1/2 (23.8)

26 S-FSG Series Dimensions: Elbow Type Seal method: Face seal For G thread W1 ød3 Indicator window direction: 0 Indicator window direction: 180 W2 X Y pplicable tubing O.D. ød L3 L4 ød1 H (Width across flats) M L1 L2 T Metric Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 Weight M W1 W2 X Y S22 1FSG -G S22 1FSG -G S22 1FSG -G / S22 1FSG -G S22 1FSG -G S22 1FSG -G S22 1FSG -G S22 1FSG -G / S22 1FSG -G S22 1FSG -G S32 1FSG -G S32 1FSG -G / S32 1FSG -G S32 1FSG -G S32 1FSG -G S32 1FSG -G / S32 1FSG -G S32 1FSG -G S42 1FSG -G S42 1FSG -G / S42 1FSG -G *1 Reference dimensions *2 Reference dimensions of threads after installation 25

27 Stainless Steel Type Speed Controller with Indicator S-FSG Series Dimensions: Universal Type Seal method: Face seal For G thread W1 ød3 ød1 pplicable tubing O.D. ød Y L4 ød2 L5 S-FSG L3 S-FS M H (Width across flats) T L1 L2 Metric Size Model d T H D1 D2 D3 L1 L2 L3 L4 L5 M W1 Y Weight S23 1FSG1-G S23 1FSG1-G / S23 1FSG1-G S23 1FSG1-G S23 1FSG1-G S23 1FSG1-G / S23 1FSG1-G S23 1FSG1-G S33 1FSG1-G S33 1FSG1-G / S33 1FSG1-G S33 1FSG1-G S33 1FSG1-G S33 1FSG1-G / S33 1FSG1-G S33 1FSG1-G S43 1FSG1-G / S43 1FSG1-G Uni-S-FS 26

28 1 S-FSG Series Made to Order Please contact SMC for detailed dimensions, specifications and lead times. Elbow Universal Stainless steel 1 Lubricant: Vaseline -X12 2 Grease-free (Seal: Fluorine-coated) + Restrictor (Without check valve) -X21 X12 Example) S2201FSG-01-04S-X12 X21 Example) S2201FSG-01-04S-X21 Note 1) Not particle-free Note 2) The restrictor is only compatible with the part number of the meter-out type. Note 3) Only the needle and O-ring are fluorine-coated. Laser printing Laser printing 3 Restrictor (Without check valve) -X214 Example) S2201FSG-01-04S-X214 Note) The restrictor is only compatible with the part number of the meter-out type. 4 Clean Series 10- Example) 10-S2201FSG-01-04S Note 1) Fluorine grease is used. Note 2) The cleanliness class (ISO class) is X214 Laser printing Laser printing 27

29 Uni Thread Type Speed Controller with Indicator (Elbow Type) S-FS Series Elbow Brass 1 Electroless nickel plated S-FS New-stand male threads for piping that reduces the screw-in time by 1/3. Model Uni thread Gasket Female thread Rc, G NPT, NPTF Shape of Uni thread ridge Use of the chamfered surface of the female thread as the seat surface and adoption of gaskets made by laminating NBR on both surfaces of stainless steel plates achieve secure sealing regardless of the difference of diameters due to the female thread type, deviations due to the tolerance, or the size of the chamfered corner. (ny standard chamfered female thread can be used.) ridge shape has been created as a Uni thread for common applications for Rc, G, NPT and NPTF. The gasket seal method drastically cuts piping work-hours. Flow Direction Symbols on Body Meter-out Meter-in Symbol Caution Be sure to read this before handling the products. Refer to the back cover for safety instructions. For flow control equipment precautions, refer to the Handling Precautions for SMC Products and the Operation Manual on the SMC website: Model Uni pplicable tubing O.D. thread Metric size Inch size Elbow type size /8" 5/32" 1/4" 5/16" 3/8" 1/2" S22l1FSl-U01 1/8 V V V V V V V V V S22l1FSl-U02 1/4 V V V V V V V V V V S32l1FSl-U02 1/4 V V V V V V V S32l1FSl-U03 3/8 V V V V V V V S42l1FSl-U04 1/2 V V V V V Specifications Fluid ir Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.1 MPa mbient and fluid temperature 5 to 60 C (No freezing) pplicable tubing material Nylon, Soft nylon, Polyurethane*1 *1 Use caution at the max. operating pressure when using soft nylon or polyurethane tubing. (For details, refer to the Web Catalog.) Flow Rate and Sonic Conductance Tubing O.D. C values: Sonic conductance dm 3 /(s bar) b values: Critical pressure ratio Model S22l1FSl-U01 S22l1FSl-U02 S32l1FSl S42l1FSl Metric size Inch size Free flow Controlled flow Free flow Controlled flow ø3.2 ø4 ø1/8" ø5/32" ø6 ø8 ø10 ø1/4" ø5/16" ø3.2 ø4 ø6 ø1/8" ø5/32" ø8 ø10 ø1/4" ø5/16" ø3/8" * C and b values are for controlled flow with the needle fully open and free flow with the needle fully closed. ø6 ø8 ø1/4" ø5/16" ø10 ø12 ø10 ø12 ø16 ø3/8" ø3/8" ø1/2" S-FSG Uni-S-FS 28

30 Flow rate [L/min (NR)] S-FS Series Elbow Brass 1 Electroless nickel plated How to Order S F S U01 06 Body size 2 1/8, 1/4 3 3/8 4 1/2 Control type *1 0 Meter-out 1 Meter-in *1 Meter-out and meter-in types can be visually identified by color of the knob. Meter-out: Gray Meter-in: Light blue Type 2 Elbow Nil With indicator Indicator window direction Indicator window Indicator window pplicable tubing O.D. *1 Metric size Inch size Tubing O.D. 23 ø3.2*2 04 ø4 06 ø6 08 ø8 10 ø10 12 ø12 16 ø16 Tubing O.D. 01 ø1/8" 03 ø5/32" 07 ø1/4" 09 ø5/16" 11 ø3/8" 13 ø1/2" *1 For selecting applicable tubing O.D., refer to the Model on page 28. Metric size and inch size types can be visually identified by color of the release button. Metric size: Light gray Inch size: Orange *2 Use ø1/8" tubing. * Orientation of indicator direction is fixed when manufacturing, and cannot be changed by the user. Needle Valve: Flow Rate Characteristics Port size U01 Uni 1/8 U02 Uni 1/4 U03 Uni 3/8 U04 Uni 1/2 S2201FSl-U01, S2211FSl-U01 S2201FSl-U02, S2211FSl-U02 Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 06, 07, 08, 09, 10 03, 04 01, 23 Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 08, 09, 10, 11 06, 07 03, 04 01, S3201FSl, S3211FSl Number of needle rotations S4201FSl, S4211FSl Number of needle rotations Flow rate [L/min (NR)] Inlet pressure: 0.5 MPa 10, 11, 12 08, 09 06, Inlet pressure: 0.5 MPa 12, 13, 16 10, Number of needle rotations Number of needle rotations * The numbers above the flow rate characteristic curves in the charts show the applicable tubing outside diameter as defined by the product number. 29

31 Uni Thread Type Speed Controller with Indicator S-FS Series Construction: Elbow Type S22l1FSl-U01-06!2 e!1 S-FS!0 o Meter-in Meter-out!5 q t r u i!6!2 Component Parts No. Description Material Note 1 Body PBT 2 Body B Brass Electroless nickel plating 3 Knob POM 4 Needle PBT 5 Needle guide Brass Electroless nickel plating 6 U-seal HNBR 7 O-ring NBR 8 O-ring NBR 9 Cassette 10 Seal NBR 11 Bonnet POM 12 Bonnet B POM 13 Gear POM 14 Indicator gear POM 15 Clip Stainless steel 16 Gasket NBR/Stainless steel S-FSG Uni-S-FS 30

32 S-FS Series Dimensions: Elbow Type Seal method: Gasket seal For Uni thread W1 ød3 Indicator window direction: 0 Indicator window direction: 180 W2 Y X pplicable tubing O.D. ød L3 L4 ød1 M1 H (Width across flats) L1 L2 T Metric Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 M W1 W2 X Y Weight S22l1FSl-U (13) S22l1FSl-U (26) 13 S22l1FSl-U / (13) (12.7) S22l1FSl-U (29.3) (14) S22l1FSl-U (32.2) (15) S22l1FSl-U (30.3) S22l1FSl-U (25) 17 S22l1FSl-U / (32.8) (17.5) S22l1FSl-U (33.3) (26) S22l1FSl-U (36.3) (27) S32l1FSl-U (48) S32l1FSl-U / S32l1FSl-U (49) S32l1FSl-U (51) S32l1FSl-U (37) S32l1FSl-U / S32l1FSl-U (40) S32l1FSl-U (42) S42l1FSl-U (40.2) (59) 24 S42l1FSl-U / (43.6) (61) (23.8) S42l1FSl-U (47.6) (65) *1 Reference dimensions *2 Reference dimensions of threads after installation * The values in ( ) are for NPT thread. Inch Size Model d T H D1 D3 L1 L2 L3 L4*1 *2 M W1 W2 X Y Weight S22l1FSl-U /8" (26) 13 (13) S22l1FSl-U /32" / S22l1FSl-U /4" (12.7) (27.7) 14 (13) S22l1FSl-U /16" (29.3) (14) S22l1FSl-U /8" (30.3) 23 (24) S22l1FSl-U /32" S22l1FSl-U /4" 1/ (32.8) (24) (17.5) S22l1FSl-U /16" (33.3) (25) S22l1FSl-U /8" (35.8) (26) S32l1FSl-U /4" S32l1FSl-U /16" 3/ (48) S32l1FSl-U /8" (49) S32l1FSl-U /4" S32l1FSl-U /16" 3/ (37) S32l1FSl-U /8" (38) S42l1FSl-U /8" (40.2) (59) 1/ S42l1FSl-U /2" (23.8) (43.7) (61) *1 Reference dimensions *2 Reference dimensions of threads after installation * The values in ( ) are for NPT thread. 31

33 S-FS Series Specific Product Precautions 1 Be sure to read this before handling the products. Refer to the back cover for safety instructions. For flow control equipment precautions, refer to the Handling Precautions for SMC Products and the Operation Manual on the SMC website: Design and Selection Warning 1. Check the specifications. The products in this catalog are designed to be used in compressed air systems (including vacuum) only. If the products are used in an environment where pressure or temperature is out of the specified range, damage and/or malfunction may result. Do not use under such conditions. (Refer to the specifications.) Please contact SMC when using a fluid other than compressed air (including vacuum). We do not guarantee against any damage if the product is used outside of the specification range. 2. The products in this catalog are not designed for the use as stop valve with zero air leakage. certain amount of leakage is allowed in the product s specifications. Tightening the needle to reduce leakage to zero may result in equipment damage. 3. Do not disassemble the product or make any modifications, including additional machining. It may cause human injury and/or an accident. 4. The flow rate characteristics for each product are representative values. The flow rate characteristics are characteristics of each individual product. ctual values may differ depending on the piping, circuitry, pressure conditions, etc. 5. Sonic conductance (C) and critical pressure ratio (b) values for products are representative values. The speed controller s controlled flow values are with the needle fully open and free flow with the needle fully closed. 6. Check if PTFE can be used in application. PTFE powder (Polytetrafluoroethylene resin) is included in the seal material for piping taper thread of male thread type. Confirm that the use of it will not cause any adverse effect on the system. Please contact SMC if the Material Safety Data Sheet (MSDS) is required. Mounting Warning 1. Operation Manual Install the products and operate them only after reading the Operation Manual carefully and understanding its contents. lso, keep the Operation Manual where it can be referred to as necessary. 2. Ensure sufficient space for maintenance activities. When installing the products, allow access for maintenance. 3. Tighten threads with the proper tightening torque. When installing the products, follow the listed proper torque. Warning Mounting 4. fter pushing the knob down to lock, confirm that it is locked. It should not be possible to rotate the knob to the right or to the left. If the knob is pulled with force, it may break. Do not pull the knob with excessive force. Locked Unlocked 5. Check the degree of rotation of the needle valve. The products in this catalog are retainer type so that the needle is not removed completely. Over rotation will cause damage. 6. Do not use tools such as pliers to rotate the knob. It can cause idle rotation of the knob or damage. 7. Verify the air flow direction. Mounting backward is dangerous, because the speed adjustment needle will not work and the actuator may lurch suddenly. 8. djust the speed by opening the needle slowly from the fully closed state. Loose needle valves may cause unexpected sudden actuator lurching. When a needle valve is turned clockwise, it is closed and actuator speed decreases. When a needle valve is turned counterclockwise, it is open and actuator speed increases. 9. Do not apply excessive force or shock to the body or fittings with an impact tool. It can cause damage or air leakage. 10. Refer to the Fittings and Tubing Precautions on the SMC website for handling One-touch fittings. 11. To install/remove the product, use an appropriate wrench to tighten/loosen at the supplied nut on body B. Do not apply torque at other points as the product may be damaged. Rotate body manually for positioning after installation. 12. Do not use body and/or elbow body for applications involving continuous rotation. Body and the fitting section may be damaged. Universal Body Body B Elbow body 32