Manifold Regulator Modular Type. Regulator for manifold. Body size. Number of stations stations. 10 stations. Standard Specifications

Transcription

1 Manifold Regulator Modular Type /3000 Series modular type that can be freely mounted on a manifold station. Optimal for central pressure control. Easily set up using the new knob. lso has a One-touch lock system. RM 500 Regulator for manifold Body size Number of stations 0 stations 0 0 stations How to Order 05 Piping B N F Type 0 NPT G G Made to Order Nil None X6 With backflow function ccessory (Pressure gauge) Nil None (With plug) G Back side thread: G G Vertical side thread: G Pressure gauges are shipped together (but not assembled). Port size (OUT side) Port size pplicable model 0 / 03 3/8 Thread type Nil Rc IN From end plate From OUT port or G port Standard Specifications Proof pressure Maximum operating pressure Regulating pressure range mbient and fluid temperature Fluid Construction.5 MPa.0 MPa 0.05 to 0.85 MPa 5 to 60 C (No freezing) ir Relieving type IN IN IN Port Size/Weight Port size Piping IN side OUT side Body End plate Pressure gauge port size Weight (kg) Regulator End plate JIS With backflow function Weight by the Number of Stations Stations (kg) 75

2 Manifold Regulator /3000 Series Option: Pressure Gauge (Max. pressure indication:.0 MPa) Flow Rate Characteristics (Representative Value) Inlet pressure: = 0.7 MPa G G Option/ ssembly Part no. Composition of assembly 363 Width across flats 0 Note ) in the gauge part no. (e.g. G ) indicates the type of threads used for connection. For Rc, leave the symbol blank, and for NPT, enter N. Please consult with SMC for the supply of a pressure gauge with NPT port threads. Note ) Use caution not to tighten excessively when mounting a pressure gauge, otherwise it will may result in a breakdown. For sealing, use a sealant tape. Option/Mounting Bolt ssembly Part no Hexagon socket head cap screw (M5 x 70) Hexagon socket head cap screw (M6 x 85) type can be used as a single unit regulator. Example of mounting Set nut Set nut (397) (B0) 36 Set nut (353) (B30) Note) Tighten the set nut securely and fix it. Recommended torque for set nut : 7.5 ± 3.5 N m :.5 ±.5 N m 30 B 3 0 C D Qty. E 5. 8 F Note With flat washer With flat washer G.3.3 H M33 x.5 M x.5 Flow rate (L/min (NR)) Flow rate (L/min (NR)) Pressure Characteristics (Representative Value) Inlet pressure (MPa) Initial setting P = 0.7 MPa P = 0. MPa Q = 0 L/min (NR) RJ R5 to 935 RX MR RM RP IR - IR IRV VEX SRH SRP SRF ITV IC ITVH ITVX PVQ VY VB VBT P00 Inlet pressure (MPa) 755

3 /3000 Series Construction Component Parts No. Description Material Note Body luminum die-casted Chromate treated/platinum silver painted Bonnet Polyacetal Replacement Parts Part no. No. Description Material 3 Diaphragm assembly Weather resistant Valve assembly Brass, H Valve spring Stainless steel Valve O-ring K0089 K x 8.5 x.5.5 x 0.5 x 7 O-ring K00078 K00083 JIS B 0 P3 JIS B 0 P5 8 O-ring K0099 K x 5 x.5 35 x 3 x 756 Component Parts ssembly Part no. Description No. Component Qty. Regulator 9 Regulator --0 -B B-03 0 End plate R End plate L End plate O-ring B B assembly (Except (Except 3 B set O-ring) O-ring) Hex. socket head cap screw O-ring assembly B 3 set Hex. socket head cap screw How to order 500 () When adding n stations to RM B Regulator n pcs. assembly n pcs. () When regulators, end plate assembly and bracket assembly are assembled to make the manifold of n stations. Regulator n pcs. assembly n pcs. End plate assembly pc.

4 Manifold Regulator /3000 Series Pressure gauge (Option) Pressure gauge (Option) (With pressure gauge) : x ø6 : x ø7 Panel mounting hole RJ R5 to 935 RX MR RM RP : n x / : n x 3/8 IN () : n x / : n x 3/8 IN () : x 3/8 : x / Gauge port n x /8 IR - IR IRV VEX SRH SRP SRF ITV For products with pressure gauge, pressure gauges are shipped together with product. IC 6 7 B C D E F G H I J K L M N O P ITVH ITVX by the Number of Stations L L L3 L L L Manifold stations PVQ VY VB VBT P00 757

5 /3000 Series Specific Product Precautions Be sure to read this before handling the products. Refer to back page 50 for Safety Instructions and pages 387 to 39 for Precautions on every series. Caution Mounting/djustment. Release the lock to adjust the pressure. fter the adjustment, engage the lock. Failure to observe this procedure could damage the knob or cause the secondary pressure to fluctuate. ) On the type, pull the adjustment knob to release the lock and push the adjustment knob to engage the lock. If it does not lock easily, turn the knob slightly clockwise or counterclockwise before pushing it. ) On the type, pull the adjustment knob to release the lock. (n orange colored line is provided at the bottom of the adjustment knob for visual checking.) Push the adjustment knob to engage the lock. If it does not lock easily, turn the knob slightly clockwise or counterclockwise; then, push it until the orange colored line is no longer visible.. Make sure to check the inlet pressure before setting the pressure. The outlet pressure must be set to 85% or less of the inlet pressure. Failure to observe this procedure could cause the outlet pressure to fluctuate. 3. In the case of the common IN type, supply pressure from the two IN ports from both ends. Failure to observe this procedure could lead to an excessive pressure drop. Warning Warning Selection. For /3000, releasing the inlet pressure does not mean that all residual pressure is released (the outlet pressure cannot be released). When releasing residual pressure, use a manifold regulator with a backflow function (X6). Maintenance. Make sure to perform a periodic inspection of the pressure gauge when the manifold regulator with a backflow function is installed between a solenoid valve and an actuator. Sudden pressure changes could happen and the durability of the product could be reduced. Using an electronic type pressure gauge is recommended, depending on the situation. 758