Plug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.

Transcription

1 Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck Collet Lock ring Spring Spring guide Female connector body Stopper Half union body Suitable for centralized distribution of supply air Easy distribution utilizing One-touch fittings One-touch fitting installation without the use of tools Locking system makes the use of tools unnecessary and piping more efficient. ir output direction possible through 30 Universal construction allows for changes in air output direction after connections are completed. ubing ubing material ubing O.. hread Size Male Female Specifications Fluid Operating pressure range Note) Proof pressure mbient and fluid temperature Mounting section hread Nut section Seal on the s (Standard) Copper-free (Standard) Principal Parts Material Nylon, Soft nylon, Polyurethane, FEP, PF ø, ø, ø, ø, ø, ø1 R 1, R 1, R 3, R1 2 M5 x 0., M x 1, Rc 1, Rc 1, Rc 3, Rc 1 2 ir 0 kpa to 1 MPa 3 MPa 5 to 0 C (No freezing) JIS B 0203 (aper for piping) JIS B 0205 (Metric coarse thraed) JIS B 0205 (Metric fine ) With sealant Brass parts are all electroless nickel plated Note) Please avoid using in a vacuum holding application such as a leak tester, since there is leakage. Body Stud Lock ring Spring Spring guide Stopper hread Guide Collet, Release button Seal, Chuck C30, PB, Stainless steel 30 C30 Stainless steel 30, PB NBR Stainless steel 30 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

2 Series KB 1 ir Output Port: KBV, KBZ(P.207) KB V 1 O.. KBZ1-0 KBZ1-0 KBZ2-0 KBZ3- KBZ3- KBZ- 0 Branch Elbow Module: KBZ ube size/ Connecting female size How to Order Elbow Module: KBV KBV1-0 KBV1-0 KBV2-0 KBV3-0 O.. KBV3- KBV3- KBV- KBV-1 1 Elbow Socket Module: KBV KBV1-M5 KBV1-M KBV2-M5 KBV2-M KBV2-R1 KBV3-R1 KBV3-R2 KBV-R2 KBV-R3 Connection M5 x 0. M x 1 M5 x 0. M x 1 Rc 1 Rc 1 Rc 3 2 ir Supply Port: KBE, KBH, KBB, KBS, KBL (P.20, 209) KB H 1 R1 S Bulkhead Female Connector: KBE KBE1-0 KBE1-0 KBE2-0 KBE2-0 KBE2- O.. KBE3-0 KBE3- KBE3- KBE- Female Connector Union: KBH Connection KBH1-R1S R KBH2-R1S 1 R 1 KBH2-R3S R 3 KBH3-R2S R 1 KBH3-R3S R 3 KBH3-RS R 1 2 KBH-R3S R 3 KBH-RS R Male Connector Socket: KBB Connection KBB1-M5 M5 x 0. KBB2-M M x 1 KBB3-R1 Rc 1 KBB-R2 Rc 1 With sealant (Male only) ube size/connection size Female Connector Socket: KBS Connection KBS1-R1 Rc 1 KBS2-R2 Rc 1 KBS3-R3 Rc 3 KBS-R Rc 1 2 Standard specifications Female Connector Elbow Union: KBL Connection KB-R1S R KB-R1S 1 KB-R2S R 1 KB-R3S R 3 KBL3-R2S R 1 KBL3-R3S R 3 KBL3-RS R 1 2 KBL-R3S R 3 KBL-RS R 1 2 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

3 Piping Module Series KB Combination Examples 3 Other Pipng Material: KBN, KB, KBR(P.2) KB N 1 KB 2 1 Nipple: KBN KBN1 KBN2 KBN3 KBN KB2-1 KB3-2 KB-3 ifferent iameter Module: KBR KBR2-1 KBR3-2 KBR-3 Body size Elbow ifferent iameter Female Connector Module: KB KBV2-M5 Plug/Cap: KBP, KBC(P.211) KB P 1 KB-R2S Plug: KBP KBP1 KBP3 KBP 5 Bracket mounting M x 1 x l Cap: KBC KBC1 KBC2 KBC3 KBC Bracket: KBX(P.211) KB X size Bracket mounting M x 1 x l KBE2-0 KBN2 KBV1-0 KBP1 KBR2-1 KBE2-0 KBE2-0 KBP1 Bracket: KBX KBX KBX KBX1 KBX1 KBX20 KBX KB2-1 KBV1-0 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

4 Series KB Be sure to read before handling. Refer to front matters 5 and 59 for Safety Instructions and pages 13 to 1 for Fittings and ubing Precautions. Caution Precautions How to Install 1. Insert each piping module by matching the arrows on the lock ring and the body of the other module. lnsert together. If it becomes difficult to match both modules, rotate modules to left and right while pushing together. When a match is not done, piping material will eject under pressure. Match arrows. Piping Module-Insertion and Removal Structual rawing Piping module-male side hese parts match together hese parts match together Match arrows together and insert Piping module-female side 1. Match arrows together and insert piping module male side into female side. Male side (Protruding portion) Lock ring (Lock portion) Female side (Guide portion) Female side (Window portion) 2. Confirm insertion by turning modules to right and left or pulling on them. But do not touch the lock ring in the process. Female side (Groove portion) Caution o not touch lock ring. How to Remove 1. Exhaust the pressure in pipe before removing. If lock is released under pressure, piping material will eject. urn the lock ring 90 clockwise (in the direction of the arrow). his will cancel out the affects of the lock ring. You need not hold lock ring in place. Lock ring will hold automatically in this position. Lock ring Module body (Male side) Module body (Female side) 2. By inserting the lock ring, the lock portion touches female side guide portion and falls into the direction shown with the arrow. urning lock ring 90 unlocks modules. 2. Remove the modules by pulling apart. o not touch the lock ring. fter removal, the lock ring will return to normal position automatically beause of a return spring. When removed, it automatically rotates 90 in the opposite direction as its spring o not touch lock ring. is built into the lock ring. 3. By pushing tighter, lock portion goes over female side guide portion and snaps into window slot portion. Male side protruding portion snaps into female side groove portion. his performs the function of a detent. Caution Others 1. When connecting piping material to each other, do not apply a bending force, etc. Piping material may be deformed or damaged. If unit is longer than 5 stations, please use brackets or it may result in deformation of the piping material by bends, deflection, etc. 2. Each type of module materials is capable of being piped with all other materials. 3. When attaching female connector union and female connector elbow union, use the body's hexagon surface and tighten s with a suitable wrench. Use the root nearest the when tightening with a wrench. Hex. across flats may be deformed, if using an improper wrench for hex. across flats. 20 Male module inserted fully into position.. o remove, rotate lock ring 90 to release lock portion from female side window slot, then the lock is released. Removal is complete. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

5 Piping Module Series KB 1 ir Output Port Elbow Module: KBV KBV1-0 KBV1-0 KBV2-0 KBV3-0 KBV3- KBV3- KBV- KBV-1 O L3 L M Elbow Socket Module: KBV KBV1-M5 KBV1-M KBV2-M5 KBV2-M KBV2-R1 KBV3-R1 KBV3-R2 KBV-R2 KBV-R3 H Connection across flats M5 x 0. M x 1 M5 x 0. M x 1 Rc 1 1 Rc 1 Rc L3..1 L Branch Elbow Module: KBZ KBZ1-0 KBZ1-0 KBZ2-0 KBZ3- KBZ3- KBZ- 1 2 O L L M P Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

6 Series KB 2 ir Supply Port Female Connector Union: KBH KBH1-R1S KBH2-R1S KBH2-R3S KBH3-R2S KBH3-R3S KBH3-RS KBH-R3S KBH-RS Connection R 1 R 1 R 3 R 1 R 3 R 1 2 R 3 R 1 2 H across flats 1 Reference dimensions after R L (With sealant) Female Connector Elbow Union: KBL KB-R1S KB-R1S KB-R2S KB-R3S KBL3-R2S KBL3-R3S KBL3-RS KBL-R3S KBL-RS H Connection across flats R 1 1 R 1 R 3 R 1 R 3 R 1 2 R 3 R 1 2 Reference dimensions after R (With sealant) Bulkhead Female Connector: KBE KBE1-0 KBE1-0 KBE2-0 KBE2-0 KBE2- KBE3-0 KBE3- KBE3- KBE- O.. (M) M x 1 M1 x 1 M1 x 1 M20 x 1 M1 x 1 M20 x 1 M x 1 H1 across flats 1 H2 across flats 1 27 L M Mounting plate thickness 7 mm or less 20 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

7 Piping Module Series KB 2 ir Supply Port Male Connector Socket: KBB KBB1-M5 KBB2-M KBB3-R1 KBB-R2 Connection M5 x 0. M x 1 Rc 1 Rc 1 H across flats Female Connector Socket: KBS KBS1-R1 KBS2-R2 KBS3-R3 KBS-R H Connection across flats Rc 1 Rc 1 Rc 3 Rc Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

8 Series KB 3 Other Piping Material Nipple: KBN L KBN1 KBN2 KBN3 KBN Elbow ifferent iameter Female Connector Module: KB L3 L 1 2 KB2-1 KB3-2 KB ifferent iameter Module: KBR KBR2-1 KBR3-2 KBR-3 2. L Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)

9 Piping Module Series KB Plug / Cap Plug: KBP KBP1 KBP3 KBP H across flats Bracket mounting M x 1 x l Cap: KBC KBC1 KBC2 KBC3 KBC H across flats Bracket mounting M x 1 x l 5 Bracket Bracket: KBX KBX KBX KBX1 KBX1 KBX20 KBX model KBP, KBC KBE1-0 KBE1-0, KBE2-0 KBE2-0, KBE3-0 KBE2-, KBE3- KBE3-, KBE In the case of KBX, use the enclosed mounting screws designed for KBP (plug) and KBC (cap). Screw size: Cross recessed round head screw (M x 1 x l) Screw color: Black Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, C Main Office: (50) Outside Local rea: (00)