atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
|
|
- Henry Lindsey
- 6 years ago
- Views:
Transcription
1 Section 1 Parker Hannifin orporation ivision
2 atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
3 atalog /USA Index ontrol omponents Advantages, Assembly, Ordering Information M, 62MBH, 66M, 66MBH... 5 (Unions, Bulkhead Unions, Female onnectors, Female Bulkheads) W68M, 68M, W68MR, 68MR, 362M... 6 (Male onnectors, Round Body Male onnectors, Union Y onnectors) 364M, 365M, W368M, 368M... 7 (Union Tees, Unions Elbows, Union Y Male onnectors) W369M, 369M, W369MX, 369MX... 8 (Male Elbow Swivel, Extended Male Elbow Swivel) W371M, 371M, W372M, 372M... 9 (Male Run Tee Swivel, Male Branch Tee Swivel) Polyethylene Tubing Tubing, R Tubing Tubing Technical Information Parker Hannifin orporation ivision
4 atalog /USA Basic Features Advantages Ready-to-use miniature one piece fitting for use with most thermoplastic and soft copper tubing. This fitting was designed to meet the needs of the motion control industry where fast assembly, disassembly and reassembly is important. o special tools needed for assembly; just insert the tubing until it bottoms. Microlok is designed to be used without a tube support to provide full flow through the tubing. The collet design of Microlok grips the tubing securely to provide tubing retention. The Microlok fitting comes in externally threaded hex and round straight fitting body styles and in a range of shaped configurations. Microlok straight fittings have a nickel plated brass body and shaped fittings have a composite body with nickel plated brass componentry. Microlok external pipe threads come with a pre-applied white acrylic sealant. Positional external pipe threaded ends are featured on shapes for installation in compact areas and for precise positioning. Microlok should not be used for live swivel applications. Materials Microlok Straights: A360, A345 (nickel plated) Microlok Shape Bodies: Reinforced Polyphenylene Oxide (PPO) O-Ring: itrile (other compounds available on request) ollet: ickel Plated Brass Applications Use with Series U, U and HU polyurethane tubing, series E polyethylene tubing or series nylon tubing. Microlok was designed to meet the needs of the motion control industry. onsult the factory with any questions regarding special product applications. All applications should be carefully tested through the range of conditions which may be encountered prior to use. Working Pressure and Temperature Ranges 32 to +150 F at up to 150 PSI depending on tubing being used. Vacuum applications are dependent upon temperature and type of tubing used. Assembly Instructions 1. ut thermoplastic tubing squarely, using tube cutter. Metal tubing should be cut squarely and free of burrs. Be certain the port or mating part is clean and free of debris. 2. Insert tubing into fitting until it bottoms. A slight twisting motion will ease the insertion. Pull on tubing to verify it is properly retained in the fitting. 3. To disassemble, simply push the collet against the body and remove tubing. Order By part number and name. omenclature Part numbers are constructed from symbols that identify the style and size of the fitting. The first series of numbers and letters identify the style and type fitting. The second series of numbers describe the size. ote: 0 indicates UF Thread Example W 68 M 4 2 White Arcylic Thread Sealant Male onnector Microlok 1/4" (4/16) Tube O.. 1/8" (2/16) Pipe Thread Sizes Tube sizes are determined by the number of sixteenths of an inch in the tube O... 4 Parker Hannifin orporation ivision
5 atalog /USA Part umbers & imensions Equal Union 62M Part Tube Flow o. Size O.. ia. 62M-2 1/ M-5/32 5/ M-4 1/ M-6 3/ M-8 1/ Unequal Union 62M Part Tube Tube Flow o. Size 1 Size 2 O.. ia. 62M-5/32-2 5/32 1/ M-4-2 1/4 1/ M-4-5/32 1/4 5/ M-4-6 1/4 3/ M-6-8 3/8 1/ Bulkhead Union 62MBH Part Tube P Flow o. Size B Hex Max. ia. 62MBH-2 1/8 3/8 1/ MBH-5/32 5/32 7/16 1/ MBH-4 1/4 1/2 5/ MBH-6 3/8 5/8 3/ MBH-8 1/2 3/4 7/ Female onnector 66M Pipe Part Tube Thread Flow o. Size PTF Hex ia. 66M-2-2 1/8 1/8 9/ M-2-4 1/8 1/4 11/ M-5/32-2 5/32 1/8 9/ M-5/32-4 5/32 1/4 11/ M-4-2 1/4 1/8 9/ M-4-4 1/4 1/4 11/ M-4-6 1/4 3/8 13/ M-6-4 3/8 1/4 11/ M-6-6 3/8 3/8 13/ M-6-8 3/8 1/ M-8-6 1/2 3/8 13/ M-8-8 1/2 1/ Female Bulkhead 66MBH Pipe Part Tube Thread B P Flow o. Size PTF Thread Hex Max ia. 66MBH-2-4 1/8 1/4 3/ / MBH-5/32-2 5/32 1/8 7/ / MBH-5/32-4 5/32 1/4 7/ / MBH-4-2 1/4 1/8 1/2-24 9/ MBH-4-4 1/4 1/4 1/ / MBH-6-6 3/8 3/8 5/ / MBH-8-6 1/2 3/8 3/ / MBH-8-8 1/2 1/2 3/ O.. O.. 2 P P Hex 1 Hex Hex B B 5 Parker Hannifin orporation ivision
6 atalog /USA Part umbers & imensions Microlok Male onnector W68M Part Tube Pipe Ht. Flow o. Size Thread Hex M ia. W68M-2-1 1/8 1/16 3/ W68M-2-2 1/8 1/8 7/ M-2-0 1/ / W68M-5/32-1 5/32 1/16 7/ W68M-5/32-2 5/32 1/8 7/ W68M-5/32-4 5/32 1/4 5/ M-5/32-0 5/ / W68M-4-1 1/4 1/16 7/ W68M-4-2 1/4 1/8 1/ W68M-4-4 1/4 1/4 5/ W68M-4-6 1/4 3/8 11/ M-4-0 1/ / W68M-6-2 3/8 1/8 5/ W68M-6-4 3/8 1/4 5/ W68M-6-6 3/8 3/8 11/ W68M-6-8 3/8 1/2 7/ W68M-8-4 1/2 1/4 3/ W68M-8-6 1/2 3/8 3/ W68M-8-8 1/2 1/2 7/ Microlok Round Body Male onnector W68MR Part Tube Pipe Body Internal Ht. Flow o. Size Thread ia. H Hex M ia. 68MR-2-0 1/ W68MR-5/32-1 5/32 1/ / W68MR-5/32-2 5/32 1/8.43 1/ MR-5/32-0 5/ W68MR-4-1 1/4 1/ / W68MR-4-2 1/4 1/8.47 3/ W68MR-4-4 1/4 1/4.59 3/ MR-4-0 1/ /32" and larger straight Microlok round body Male onnectors with Pipe Threads have an internal hex for the use of an Allen Key to allow the fitting to be mounted in any position. This also permtis close porting not possible with a standard wrench. Union Y onnector 362M Part Tube Mounting Flow o. Size Hole ia. 1 ia. 362M-2 1/ M-5/32 5/ M-4 1/ M-X-0 M 68MR-X-0 M M M Hex H Hex H 1 6 Parker Hannifin orporation ivision
7 atalog /USA Part umbers & imensions Union Tee 364M omposite Body Part Tube Mounting Flow o. Size Hole ia. ia. 364M-2 1/ M-5/32 5/ M-4 1/ M-6* 3/ M-8* 1/ * 3/8 & 1/2 have no mounting hole Union Elbow 365M omposite Body Part Tube Mounting Flow o. Size Hole ia. ia. 365M-2 1/ M-5/32 5/ M-4 1/ M-6* 3/ M-8* 1/ * 3/8 & 1/2 have no mounting hole Union Y Male onnector 368M Part Tube Pipe Mounting Flow o. Size Thread Hole ia. 1 ia. 368M-2-0 1/ W368M-2-1 1/8 1/ W368M-2-2 1/8 1/ M-5/32-0 5/ W368M-5/32-1 5/32 1/ W368M-5/32-2 5/32 1/ M-4-0 1/ W368M-4-1 1/4 1/ W368M-4-2 1/4 1/ W368M-4-4 1/4 1/ M-X Parker Hannifin orporation ivision
8 atalog /USA Part umbers & imensions Male Elbow Swivel 90 W369M omposite Body Part Tube Pipe Ht. Flow o. Size Thread Hex ia 369M-2-0 1/ / W369M-2-1 1/8 1/16 3/ W369M-2-2 1/8 1/8 7/ W369M-2-4 1/8 1/4 9/ M-5/32-0 5/ / W369M-5/32-1 5/32 1/16 3/ W369M-5/32-2 5/32 1/8 7/ W369M-5/32-4 5/32 1/4 5/ M-4-0 1/ / W369M-4-1 1/4 1/16 3/ W369M-4-2 1/4 1/8 7/ W369M-4-4 1/4 1/4 9/ W369M-4-6 1/4 3/8 11/ W369M-6-2 3/8 1/8 3/ W369M-6-4 3/8 1/4 3/ W369M-6-6 3/8 3/8 3/ W369M-6-8 3/8 1/2 7/ W369M-8-4 1/2 1/4 15/ W369M-8-6 1/2 3/8 15/ W369M-8-8 1/2 1/ Extended Male Elbow Swivel W369MX Part Tube Pipe Mounting Ht. Flow o. Size Thread Hole ia. Hex ia 369MX-2-0 1/ / W369MX-2-1 1/8 1/ / W369MX-2-2 1/8 1/8.13 7/ MX-5/32-0 5/ / W369MX-5/32-1 5/32 1/ / W39MX-5/32-2 5/32 1/8.13 7/ W369MX-5/32-4 5/32 1/4.13 9/ MX-4-0 1/ / W369MX-4-1 1/4 1/ / W369MX-4-2 1/4 1/8.13 7/ W369MX-4-4 1/4 1/4.13 9/ W369MX-6-4* 3/8 1/4 3/ W369MX-6-6* 3/8 3/8 3/ W369MX-6-8* 3/8 1/2 7/ W369MX-8-4* 1/2 1/4 15/ W369MX-8-6* 1/2 3/8 15/ W369MX-8-8* 1/2 1/ * 3/8 & 1/2 have no mounting hole 369M-X-0 369MX-X-0 8 Parker Hannifin orporation ivision
9 atalog /USA Part umbers & imensions Male Run Tee Swivel W371M omposite Body Part Tube Pipe Mounting Ht. Flow o. Size Thread Hole ia. Hex ia 371M-2-0 1/ / W371M-2-1 1/8 1/ / W371M-2-2 1/8 1/8.13 7/ M-5/32-0 5/ / W371M-5/32-1 5/32 1/ / W371M-5/32-2 5/32 1/8.13 7/ M-4-0* 1/ / W371M-4-1* 1/4 1/16 3/ W371M-4-2* 1/4 1/8 7/ W371M-4-4* 1/4 1/4 9/ W371M-6-4* 3/8 1/4 3/ W371M-6-6* 3/8 3/8 3/ W371M-6-8* 3/8 1/2 7/ W371M-8-4* 1/2 1/4 15/ W371M-8-6* 1/2 3/8 15/ W371M-8-8* 1/2 1/ * 1/4, 3/8 & 1/2 have no mounting hole Male Branch Tee Swivel W372M omposite Body Part Tube Pipe Mounting Ht. Flow o. Size Thread Hole ia. Hex ia 372M-2-0 1/ / W372M-2-1 1/8 1/ / W372M-2-2 1/8 1/8.13 7/ M-5/32-0 5/ / W372M-5/32-1 5/32 1/ / W372M-5/32-2 5/32 1/8.13 7/ M-4-0* 1/ / W372M-4-1* 1/4 1/16 3/ W372M-4-2* 1/4 1/8 7/ W372M-4-4* 1/4 1/4 9/ W372M-6-2* 3/8 1/8 3/ W372M-6-4* 3/8 1/4 3/ W372M-6-6* 3/8 3/8 3/ W372M-6-8* 3/8 1/2 7/ W372M-8-4* 1/2 1/4 15/ W372M-8-6* 1/2 3/8 15/ W372M-8-8* 1/2 1/ * 1/4, 3/8 & 1/2 have no mounting hole 371M-X-0 372M-X-0 9 Parker Hannifin orporation ivision
Compression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationTrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
More informationTubing & Fittings G97. Catalog 9EM-TK-190-5
atalog 9E-TK-90-5 Tubing & Fittings Polyethylene Tubing... 98-99 ylon Tubing... 00-0 Polyurethane Tubing... 02 Push-to-onnect, Prestolok etal Fittings... 04-5 Fittings... 6-2 etric Adapters... 22-23 97
More informationVibra-Lok Fittings. Example: 68 VL V 4 2
Vibra-ok Fittings Advantages Vibra-ok provides a positive reliable seal under vibration conditions, mechanical shock or tube movement. The sleeve cushions the tubing permitting the tube to flex back and
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of.o.t. FMVSS 571.106 Meets Proposed imensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor
More informationTrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:
Parker s TrueSeal Fittings are lightweight, field attachable and connect to tubing without the use of tools. These all plastic push-to-connect fittings are manufactured from F compliant materials. Product
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of D.O.T. FMVSS 571.106 Meets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationBall Valves. Plug Valves. 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented. 1/8" to 1/4" Pipe Size. Section B. Pneumatic
Ball Valves 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented Plug Valves 1/8" to 1/4" Pipe Size B Section B Ball Valve Basic Features...2 Ball Valve Part umbers & imensions... 3-4 Plug Valve Basic Features...5
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationFlare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves
Flare Fittings SA 45 Flare eets SA Functional Requirements Resists Vibration Resists echanical Pull-out U isted Inverted Flare U isted conomical Steel ut option Access Valves Teflon Seal on Valve core
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationPrestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
More informationPneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationPneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
More informationVacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationin stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
More informationSlip-in Cartridge Valves Series CE, CP. General Description. Features. Pilot Control for Directional Functions
General E, P and 2-way slip-in cartridge valves are hydraulically controlled seat valves that are designed for compact block installation. Slip-in cartridge, cover, and pilot system are valve elements
More informationPar-Barb Thermoplastic Fittings
atalog 350E Par-arb Thermoplastic Fittings TERIS OF OSTRUTIO OIES: WSHER: WHITE YO, K POYPROPYEE UIPREE OETURE EXPE: 35H- 4-6 TTRIUTE: 35 PSTI E OET H R 4 /4 I.. 6 3/8 PT WHITE YO SPEIFITIOS PRESSURE RGE:
More informationMale - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.
Visual Index 30182-166 31382-166 30282-167 37G82-167 NPTF Pipe Male - Rigid 30382-167 Male - Swivel 30682-168 Female - Rigid 33782-168 NPSM Pipe 33982-168 Gasket Joint 34182-168 JI 37 S Male - Rigid 30482-169
More informationSuper-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationFittings & Tubing. Section G. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Section Parker Hannifin orporation otes ontrol omponents Parker Hannifin orporation Index ontrol omponents Advantages, Assembly, Ordering Information... 4 62M, 62MBH, 66M, 66MBH... 5 (Unions, Bulkhead
More informationSection F Fast-Stor Hose and Fittings
ast-stor and ittings Table of ontents Back Section ast-stor and ittings ast-stor SX Air... 2 ast-stor Air... 3 Measuring Bulk... 4 ast-stor Accessories... 5 ast-stor ittings... 6-8 Selection Procedure...
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationFemale - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
More informationStainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationFittings & Tubing. Section G. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Section G G 1 otes ontrol omponents 2 Index ontrol omponents Advantages, Assembly, Ordering Information... 4 62M, 62MBH, 66M, 66MBH... 5 (Unions, Bulkhead Unions, Female onnectors, Female Bulkheads) W68M,
More informationPiston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationFITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
More informationatalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
More informationGroup 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
More informationMessing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
More informationMur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationLubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
More informationLF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationH/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications
Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance
More information20 Series Tube Fittings and Tubes
20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect
More informationInsert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
More informationHigh-Pressure Fluid Swivel Connectors. Description. Select the Proper Swivel Combination. Specifications. Tube OD (in.) Dash Numbers (JIC-)
High-Pressure Fluid Swivel onnectors escription The figures in this document are for general reference only. High-pressure fluid swivel connectors can be used in a variety of different combinations, and
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationCartridges & Manifolds
Cartridges & anifolds SAE Encapsulated Cartridge eets Performance Requirements of D.O.T. FVSS 571.106 eets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs associated
More informationMetering Valves Catalog 4170-MV December 2010
Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationMINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
More informationPiston Seal CQ Profile
Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationPneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationPlug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
More informationBRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationPneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
More informationQuick Coupling Products
Quick oupling Products atalog 3800 US February 2005 The World Standard Parker Locations Minneapolis, Minnesota rantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin FILURE OR IMPROPER SELETION OR IMPROPER
More informationInnovative Design Maximum Capability
Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationQuick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
More informationBASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
More informationDAH Left Hand Hose Inlet Kit Instruction Sheet For Use with 700 SERIES DAH Dilution at Hand Blend Centers
DAH Left Hand Hose Inlet Kit 98-54-1 Instruction Sheet For Use with 700 SERIES DAH Dilution at Hand Blend Centers BASIC KIT FUNCTION: The left hand hose inlet kit has two main functions. The kit can be
More informationValue Proposition. Applications/Markets. r Applications with long cycle life
Fluoropolymer Tubing - PVF Tubing Value Proposition Fluoride) is uoropolymer ion of or use in ons requiring ith low xhibits low le providing gth, excellent nd good emicals and c s PVF use in ultrand ground
More informationQuicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationTransair: Advanced Pipe Systems Pocket Installation Guide [1/2"] [1"] [1 1/2"] [2"] [2 1/2"] [3"] [4"] [6"]
Transair: Advanced Pipe Systems Pocket Installation Guide [1/2"] [1"] [1 1/2"] [2"] [2 1/2"] [3"] [4"] [6"] Certifications and guarantees Offering a full range of diameters to fit your design needs. Transair
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationCode Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
More informationEdition 1
RAYPEX 800-628-5044 Edition 1 RELATIVE ORDER OF RESISTANCE TO GAS PENETRATION Impurity levels after six hours of flushing with helium 4.5 (100 1/h) Moisture (H20) Oxygen (O2) 1. Stainless Steel 1-2 ppm
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationUltraSeal Fittings. Catalog 4245-UltraSeal June 2006
UltraSeal Fittings June 2006 High Purity Components Introduction Parker UHP products are designed as leak-free connections where ultrahigh pure conditions are required. UltraSeal products, with their o-ring
More informationBrass Fittings and Valves
Brass Fittings and Valves Catalog 3501E USA December 1999 The World Standard WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationPneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
More information4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationJones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
More informationBrass Fittings and Valves
Brass Fittings and Valves Catalog 3501E USA January 2004 The World Standard OTSEGO, ICHIGA AKEVIEW, ICHIGA ABIO, IIAA AEASSE, FRACE WARIG FAIURE OR IPROPER SEECTIO OR IPROPER USE OF THE PROUCTS A/OR SYSTES
More information, ittings, Accessories, and Table of ontents How to Use This atalog / How to Order, ittings and Assemblies. : Hydraulic Braided 601, AX, 421, 482T/ST, BXX, 301, 431, 436, 381, 471T/ST, 472T, 451T/ST, 351T/ST;
More informationLIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
More information