Tubing & Fittings G97. Catalog 9EM-TK-190-5
|
|
- Alexia Eunice Farmer
- 6 years ago
- Views:
Transcription
1 atalog 9E-TK-90-5 Tubing & Fittings Polyethylene Tubing ylon Tubing Polyurethane Tubing Push-to-onnect, Prestolok etal Fittings Fittings etric Adapters Pneumatic ivision Richland, ichigan
2 atalog 9E-TK-90-5 Advantages hemical resistant, fl exible, low cost, eight colors, fi ve tube sizes and choice of reel lengths. onstruction Flexible polyethylene thermoplastic tubing is extruded from high molecular weight resin for increased dimensional stability, uniformity and long-term strength. Its resistance to environmental stress crack ing greatly exceeds that of ordinary polyethylene tubing as measured by AST -693, (0% IEPA). Applications & Approvals Polyethylene tubing is available in black as well as seven coding colors as recom mended by the Instrument Society of America. Black (EB) tubing contains an ultra-violet inhibitor which is recommended for use in sunlit areas. Ingredients of natural and color tubing (except black) listed below meet FA requirements for food contact applications. All tubing con forms to AST -248, Type I, lass A, ategory 4, rade E5. Temperature Range Suggested operating temperature range is -80 F to 50 F (-62 to 66 ). Fitting Recommendation Brass fittings omenclature numbers are constructed from symbols that identify the style and size of the fi tting. etters identify style and material. umbers identify size in /6 s of an inch. Example: E Instrument rade Tubing umber olor O.. I.. Wall Reel ength Feet Working Pressure psi at 73 F in. Burst psi at 73 F Polyethylene Tubing in. Bend Radius Inches Weight Per 00 Feet E atural / E atural / E atural / EB Black / EB Black / EB Black / E-43-R-000 Red / E-43-R-0500 Red / E-43-B-000 Blue / E-43-B-0500 Blue / E-43-O-0500 Orange / E-43-Y-0500 Yellow / E-43-P-0500 Purple / E reen / E atural 5/ /8 2. EB Black 5/ /8 2. E atural 3/ /4 2.5 E atural 3/ /4 2.5 EB Black 3/ /4 2.5 EB Black 3/ /4 2.5 E-64-R-0500 Red 3/ /4 2.5 E-64-B-0500 Blue 3/ /4 2.5 E-64-O-0500 Orange 3/ /4 2.5 E-64-Y-0500 Yellow 3/ /4 2.5 E-64-P-0500 Purple 3/ /4 2.5 E reen 3/ /4 2.5 E atural / /2 3.6 EB Black / /2 3.6 E atural 5/ EB Black 5/ oil E Y Polyethylene 3/8" (6/6) O.. /4" (4/6) I.. olor, Yellow Reel Footage 98 Pneumatic ivision Richland, ichigan
3 atalog 9E-TK-90-5 Polyethylene Tubing PEFR Flame Resistant Tubing umber olor O.. I.. Wall Reel ength Feet Working Pressure psi at 73 F in. Burst psi at 73 F in. Bend Radius Inches Weight Per 00 Feet PEFR Black 5/ /2.56 PEFR Black / /4.24 PEFR Black / /4.24 PEFR Black 3/ / PEFR Black / / onstruction & Approvals Flame resistant polyethylene is manu factured from a distinctively formulated compound which meets the U94 V-2 fl ame classifi cation. It also meets the fl ame spread, fuel contribution and smoke density requirements of the AST E84-8a tunnel test. Applications Parker series PEFR tubing is the preferred product for pneumatic con trol applications in the heating - ventilating - air conditioning - energy conservation in dustry. It is also suitable for use in petrochemical plants, petroleum refineries, pulp and paper mills, mines, steel mills and other industries where protection against intermittent flame and hot sparks is necessary. Temperature Range Suggested operating temperature range is -85 F to 50 F (-65 to +66 ). omenclature Order by tubing part number and name. Example: PE FR Polyethylene Flame Resistant /4" (4/6) O.. Reel Footage 99 Pneumatic ivision Richland, ichigan
4 atalog 9E-TK-90-5 ylon Tubing Advantages Flexible nylon tubing is carefully made from high-grade, abrasion-resistant, heat-and light-stabilized nylon. Resistance to stress - cracking greatly exceeds that of ordinary nylon tubing. Extremely low level water absorption. hemical-resistant nylon tubing has the additional benefi ts of better fl exibility, lighter weight and resistance to fl exural fatigue. olors Available in natural () and black (B). Black tubing is recommended for use out doors and in sunlit areas. Temperature Range Operating temperatures, depending upon conditions, are -65 F to 200 F (-54 to 93 ) continuous. Fitting Recommendations Brass fittings omenclature Order by tubing part number and name. Flexible Tubing *in. Burst Pressure at 73 F psi in. Bend Radius Inches Std. Reel ength Feet ylon olor om. O.. om. I.. Average Wall Thick atural / /4 250 B-2-06 Black / / atural / /4 250 B-2-03 Black / / atural 5/ /2 250 B Black 5/ / atural 3/ /8 250 B Black 3/ / atural 3/ /6 250 B Black 3/ / atural / /8 250 B Black / / atural / /8 250 B Black / / atural / /2 250 B Black / / atural 5/ /8 250 B Black 5/ / atural 3/ /8 250 B Black 3/ / atural 3/ /4 250 B Black 3/ / atural / /4 250 B Black / / atural / B-8-24 Black / *Suggested working pressure is /4 of burst pressure. Example: ylon olor atural /8" (2/6) O.. Wall Thickness (in thousandths of an inch) 00 Pneumatic ivision Richland, ichigan
5 atalog 9E-TK-90-5 Advantages Series R semi-rigid nylon tubing offers better chemical resistance than series, good resistance to high ambient tempera ture and low moisture absorption. R has a high tensile strength which will give excel lent coupling retention in high pressure, temperature and vibration environments. onstruction Parker series R tubing is manu factured from a semi-rigid nylon II material. The tubing does not contain plasticizers. Applications & Approvals R tubing is specified for machine tool lubricating systems, marine control systems, process lines for chemicals and oils and other applications requiring a high quality nylon tube. Temperature Range The recommended operating temperature range for service at rated pressures with compatible fl uids is -60 F to 200 F (-5 to 93 ). Fitting Recommendations Brass fittings omenclature Order by tubing part number and name. Example: B R 2 06 ylon olor, Black Rigid /8" (2/6) O.. Wall Thickness (in thousandths of an inch) ylon Tubing R R Semi-rigid High Strength Tubing ylon olor om. O.. PT Plastic utter PT-00 An easy to handle razor/edged tube cutter, closes automatically, assuring clean and square cuts. ay be used with polyethylene, polypropylene, nylon and other plastic tubing. How To Use Insert plastic tube to desired length, allow tube cutter to close, then apply pressure until tube snaps off. Replacement Blades PT-00RB om. I.. Average Wall Thick. *in. Burst Pressure at 73 F psi in. Bend Radius Inches Std. Reel ength Feet R-2-07 atural / /2 500 BR-2-07 Black / /2 500 R atural / /8 500 BR Black / /8 500 R atural 3/ /4 500 BR Black 3/ /4 500 R atural 3/ /8 500 BR Black 3/ /8 500 R atural / BR Black / R atural / /8 250 BR Black / /8 250 R atural 5/ /2 250 BR Black 5/ /2 250 R atural 3/ /4 250 BR Black 3/ /4 250 R atural 3/ /2 250 BR Black 3/ /2 250 R atural / /8 250 BR Black / /8 250 R atural / /2 250 BR Black / /2 250 *Suggested working pressure is /4 of burst pressure. 0 Pneumatic ivision Richland, ichigan
6 atalog 9E-TK-90-5 Polyurethane Tubing Fitting Recommendations Thermoplastic fi ttings Brass fi ttings omenclature Order by tubing part number and name. Advantages Polyurethane tubing is a high quality, precision-made tubing used in a wide range of demanding and critical applications. Polyether based, polyurethane tubing occupies a unique position among polymers, sharing the best properties of both rubber and plastic. Urethane exhibits the elongation and recovery characteristics of rubber and the chemical resistance associated with plastics. The tubing is tough, strong, kink - resistant and abrasion resistant, yet it s flexible and easy to assemble onto desig nated fittings. Tough Flexible Broad Temperature Range Eight olors Abrasion Resistant hemical Resistant Applications & Approvals Polyurethane tubing is used for a wide variety of applications. Typical usage includes air tools, robotics, pneumatic logic and actuation systems, analytical instrumentation, vacuum equipment, pressure measurement apparatus, semi-conductor equipment manufacturers and a variety of medical and laboratory applications. Temperature Range Suggested operating temperatures, depending upon conditions are 0 F to 200 F (-8 to 93 ). Example: U BK Polyurethane /8" (2/6) O.. /6" (/6) I.. olor - Black Reel ength in Feet U Polyether Base Tubing * om. O.. om. I.. Wall Thick. Working** Pressure (PSI) Burst Pressure (PSI) Reel ength Feet U /8 /6 / U U /4 /8 / U U U /8 /4 / (coil) U U /2 3/8 / (coil) * olors: lear-blank, Black-BK, reen-r, Red-RE, Yellow-YE, Blue-BU, Orange-OR, ray-ra ** Based on a full 4: safety factor. 02 Pneumatic ivision Richland, ichigan
7 atalog 9E-TK-90-5 Polyurethane Tubing otes 03 Pneumatic ivision Richland, ichigan
8 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings to ale PTF W68PP ale onnector W68PPR ale onnector Round Body W68PW ale onnector W69PP ale Elbow Swivel W69PPS ale Elbow Page 08 Page 09 Page 4 Page Page W69PW ale Elbow Swivel W7PP ale Run Tee Swivel W7PW ale Run Tee Swivel W72PP ale Branch Tee Swivel W72PW ale Branch Tee Swivel Page 5 Page 2 Page 5 Page 3 Page 5 62PP Union 62PW Union 64PP Union Tee 64PW Union Tee 65PP Union Elbow to Page 07 Page 4 Page 0 Page 5 Page 0 65PW Union Elbow 66PP Female onnector 66PW Female onnector to Female PTF Page 5 Page 08 Page 4 62PPBH Union Bulkhead 66PPBH Female Bulkhead 62PWBH Union Bulkhead 66PWBH Female Bulkhead Bulkhead Unions Page 07 Page 07 Page 4 Page 4 to ale PHBF4-B ale onnector Page 09 Auxiliary omponents B ust/weld Spatter Boot Page 4 FPB ale onnector 6PB ale Elbow HPB Union JPB Union Tee etric to ale PTF EPB Union Elbow Page 09 Page WBPB ixed Bulkhead Union etric to etric WPB Union Bulkhead Page 5 WE6PB Union Elbow Bulkhead Page 0 etric Bulkhead Unions Page 0 Page 07 Page 07 Page 0 04 Pneumatic ivision Richland, ichigan
9 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings etric to Female 4PB Female onnector W4PB Union Female Bulkhead etric to ale 64PB ale Elbow Swivel 64SPB ale Elbow Swivel Page 04 Page 04 Page 07 Page 08 F4PB ale onnector R64PB ale Run Tee Swivel S64PB ale Branch Tee Swivel etric to etric Straight 68PB ale Elbow Swivel 68SPB ale Elbow Swivel Page 05 Page 08 Page 09 Page 02 Page 08 F28PB ale onnector F8PB ale onnector R68PB ale Run Tee Swivel S68PB ale Branch Tee Swivel Page 05 Page 05 Page 08 Page 09 TRPB End Reducer FPB Plug TEPB End Expander etric Auxiliary omponents Page 09 Page 0 Page Pneumatic ivision Richland, ichigan
10 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings aterials of onstruction ickel Plated Bodies: O-ring: Release Button: rab Ring: ote: ickel plated brass itrile (other compounds available on request) Polyacetal Stainless Steel For brass body Prestolok replace PP with P Example: W68PP-4-2 omenclature Attribute: W White Arcylic Sealant 68 ale onnector PlP Prestolok 4 /4" (4/6) O.. 2 /8" (2/6) Pressure Range: Temperature Range: ote: Specifications Up to 300 PSI depending on tubing 0 to +200 F Vacuum applications are dependent upon temperature and type of tubing used. A compact one-piece push-to-connect fitting. esigned for low pressure circuits where assembly, disassembly and reassembly is important. Stainless steel grab ring grips the tubing to provide retention. Swivels are featured on all male pipe threaded shapes for installation in tight places and for precise positioning. Prestolok should not be used for live swivel applications. Prestolok fittings come with a pre-applied white acrylic sealant. O..: O.. : Tubing sizes /8, 3/6, 5/32, /4, 5/6, 3/8, /2 4,6,8,0,2,4 Recommended Tubing Prestolok nickel plated and composite fittings are designed to be used with the following Parker Hannifin Parflex ivision tubing. Tubing Series E PP R U HU Tubing aterial inear ow ensity Polyethylene Polypropylene Plasticized Polyamide (ylon) Unplasticized Polyamide (Rigid ylon) Polyurethane 90 urometer Shore A Polyurethane 95 urometer Shore A Other materials for Prestolok inch sized nickel plated fittings: Polyurethane 85 urometer Shore A AUTIO: All current manufacturers of 85A PU tubing do not approve the use of push-to-connect fittings with their product. Testing has shown acceptable use with certain O. I.. combinations. Applications and service conditions vary and therefore the use of a tube support may be required for any 85A PU tubing. The following commercially available O.. I.. 85A tubing sizes require the use of a tube support regardless of application. 5/32 3/32 5/6 /4 3/6 /8 3/8 5/6 / /2 3/8 /4 3/6 Assembly Instructions. ut thermoplastic tubing squarely, using Parker utter PT- 00. Be certain the port or mating part is clean and free of debris. 2. Insert tubing into fitting until it bottoms. A slight twisting motion will ease the insertion. Pull on tubing to verify it is properly retained in the fitting. 3. To disassemble, simply push the release button against the body and remove tubing. 4. It is recommended to trim the tubing after every disassembly to insure a proper seal. 06 Pneumatic ivision Richland, ichigan
11 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings B W 62PP Union O.. O.. ia. 62PP-2 / PP-3 3/ PP-5/32 5/ PP-4 / PP-5 5/ PP-6 3/ PP-8 / WPB Bulkhead Union B-mm W Bulkhead Hole ia. WPB4 4 x mm WPB6 6 3x mm WPB8 8 5x mm WPB0 0 8x mm WPB2 2 23x mm WPB4 4 24x mm Jam nut is supplied loose in box O.. 62PP Unequal Union 2 O.. 2 ia. 62PP-5/32-2 5/32 / PP-4-2 /4 / PP-4-5/32 /4 5/ PP-4-6 /4 3/ PP-6-8 3/8 / HPB Equal Union HPB HPB HPB HPB HPB HPB HPB P WBPB ixed Bulkhead Union 2 B-mm 2 4 W Bulkhead Hole ia. WBPB x mm WBPB x mm WBPB x mm WBPB x mm WBPB x mm WBPB x mm 2 4 B W 62PPBH Bulkhead Union Bulkhead Hole ia. B p ax. l HEX 62PPBH-2 /8 7/6 9/ PPBH-5/32 5/32 7/6 9/ PPBH-4 /4 9/6 / PPBH-5 5/6 5/8 3/ PPBH-6 3/8 3/4 7/ PPBH-8 /2 7/ PPBH Female Bulkhead Thd (PTF) P ax. ia. Bkhd Hole ia. 66PPBH-5/32-4 5/32 /4 / /2 66PPBH-4-4 /4 /4 / /6 66PPBH-6-6 3/8 3/ /8 66PPBH-8-6 /2 3/8 / P HEX 07 Pneumatic ivision Richland, ichigan
12 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings 2 HEX W HEX W4PB Bulkhead Union Female 66PP Female onnector (PTF) ia. 66PP-2-2 /8 /8 9/ PP-2-4 /8 /4 / PP-3-2 3/6 /8 9/ PP-5/32-2 5/32 /8 9/ PP-5/32-4 5/32 /4 / PP-4-2 /4 /8 9/ PP-4-4 /4 /4 / PP-5-2 5/6 /8 9/ PP-5-4 5/6 /4 / PP-6-4 3/8 /4 / PP-6-6 3/8 3/8 3/ PB Female onnector HEX 4PB4-/8 4 / PB6-/8 6 / PB6-/4 6 / PB8-/8 8 / PB8-/4 8 / B2 2 J W W4PB4-/8 4 /8 x W4PB6-/8 6 /8 3x W4PB6-/4 6 /4 3x W4PB8-/8 8 /8 5x W4PB8-/4 8 /4 5x W4PB0-3/8 0 3/8 8x W4PB2-3/8 2 3/8 23x W4PB2-/2 2 /2 23x J B2 W68PP ale onnector Thd (PTF) l HEX ia. W68PP-2- /8 /6 3/ W68PP-2-2 /8 /8 7/ W68PP-2-4 /8 /4 9/ W68PP-3-2 3/6 /8 7/ W68PP-3-4 3/6 /4 9/ W68PP-5/32-5/32 / W68PP-5/32-2 5/32 /8 7/ W68PP-5/32-4 5/32 /4 9/ W68PP-4- /4 /6 / W68PP-4-2 /4 /8 / W68PP-4-4 /4 /4 9/ W68PP-4-6 /4 3/8 3/ W68PP-5-2 5/6 /8 9/ W68PP-5-4 5/6 /4 9/ W68PP-5-6 5/6 3/8 / W68PP-6-2 3/8 /8 5/ W68PP-6-4 3/8 /4 5/ W68PP-6-6 3/8 3/8 / W68PP-6-8 3/8 /2 7/ W68PP-8-4 /2 /4 3/ W68PP-8-6 /2 3/8 3/ W68PP-8-8 /2 /2 7/ PP-5/32-4T* 5/32 /4-28 7/ *SAE-T s 68PP-X-0 ale onnector (PTF) Seal (eoprene) l ia. 68PP-2-0 /8 0x32 3/ PP-5/32-0 5/32 0x32 68PP-4-0 /4 0x32 / Pneumatic ivision Richland, ichigan
13 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings 68PPR Round Body ale onnector PTF Internal Broach Body ia. O.. O.. ia. 68PPR-2-0* / /32 3/8" PPR-5/32-0* 5/ /32 3/8" PPR-4-0* / /32 /2" W68PPR-5/32-5/32 /6 /8 7/6" W68PPR-5/32-2 5/32 /8 /8 7/6" W68PPR-4- /4 /6 5/32 /2" W68PPR-4-2 /4 /8 3/6 /2" W68PPR-4-4 /4 /4 3/6 5/8" *0-32 seal is neoprene PPHBF4-B ale onnector Thd l ia. 3-/8PPHBF4-B 3/6 /8-28 / /4PPHBF4-B 3/6 /4-9 3/ /8PPHBF4-B /4 /8-28 / /4PPHBF4-B /4 /4-9 3/ /8PPHBF4-B /4 3/8-9 7/ /4PPHBF4-B 3/8 /4-9 3/ /8PPHBF4-B 3/8 3/8-9 7/ /2PPHBF4-B 3/8 /2-4 -/ /8PPHBF4-B /2 3/8-9 7/ /2PPHBF4-B /2 /2-4 -/ P F4PB ompact ale onnector HEX F4PB4-/8 4 / F4PB4-/4 4 / F4PB6-/8 6 / F4PB6-/4 6 / F4PB8-/4 8 / F4PB8-/8 8 / F4PB8-3/8 8 3/ F4PB0-/4 0 / F4PB0-3/8 0 3/ F4PB0-/2 0 / F4PB2-/4 2 / F4PB2-3/8 2 3/ F4PB2-/2 2 / F4PB4-3/8 4 3/ F4PB4-/2 4 / F28PB ale onnector etric Straight F28PB43 4 3x F28PB45 4 5x F28PB65 6 5x This fi tting has been designed for use where space is at a premium. It is assembled using the internal hexagon and an allen key. J J FPB ale onnector PT PT W68PP-5/ /8-27 7/6" W68PP-5/ /4-8 9/6" FPB6-/8 6 / FPB6-/4 6 / FPB0-/4 0 / FPB0-3/8 0 3/ P Int. FPB2-3/8 2 3/ F8PB ale onnector etric Straight F8PB45 4 5x F8PB40 4 0x F8PB65 6 5x F8PB60 6 0x F8PB62 6 2x F8PB82 8 2x F8PB86 8 6x F8PB x Pneumatic ivision Richland, ichigan
14 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings 64PP Union Tee EPB 90 Union Elbow ia. 64PP-2 / EPB PP-3 3/ EPB PP-5/32 5/ EPB PP-4 / EPB PP-5 5/ EPB PP-6 3/ EPB PP-8 / EPB W JPB Union Tee JPB JPB JPB JPB JPB JPB JPB WE6PB Adjustable Bulkhead Union Elbow B 4 W Bkhd Hole ia. WE6PB4 4 x mm WE6PB6 6 3x mm WE6PB8 8 5x mm WE6PB0 0 8x mm WE6PB2 2 23x mm 4 65PP Union Elbow ia. 65PP-2 / PP-5/32 5/ PP-3 3/ PP-4 / PP-5 5/ PP-6 3/ PP-8 / Pneumatic ivision Richland, ichigan
15 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings HEX 4 W69PP ale Elbow Swivel 90 (PTF) l ia. W69PP-2- /8 /6 3/ W69PP-2-2 /8 /8 7/ PP-2-0* / / W69PP-2-4 /8 /4 9/ W69PP-3-2 3/6 /8 7/ W69PP-5/32-5/32 /6 3/ W69PP-5/32-2 5/32 /8 7/ W69PP-5/32-4 5/32 /4 9/ PP-5/32-0* 5/ / W69PP-4- /4 /6 3/ W69PP-4-2 /4 /8 7/ W69PP-4-4 /4 /4 9/ W69PP-4-6 /4 3/8 / PP-4-0* / / W69PP-5-2 5/6 /8 9/ W69PP-5-4 5/6 /4 9/ W69PP-6-2 3/8 /8 9/ W69PP-6-4 3/8 /4 9/ W69PP-6-6 3/8 3/8 / W69PP-6-8 3/8 /2 7/ W69PP-8-4 /2 /4 9/ W69PP-8-6 /2 3/8 / W69PP-8-8 /2 /2 7/ *0-32 seal is neoprene W69PPS ale Elbow 90 (PTF) ia. W69PPS-2-2 /8 / W69PPS5/32-2 5/32 / W69PPS5/32-4 5/32 / W69PPS-4-2 /4 / W69PPS-4-4 /4 / W69PPS-5-2 5/6 / W69PPS-5-4 5/6 / W69PPS-6-4 3/8 / W69PPS-6-6 3/8 3/ W69PPS-6-8 3/8 / W69PPS-8-6 /2 3/ W69PPS-8-8 /2 / PPS532-4T* 5/32 / * SAE-T s 6PB Adjustable ale Elbow PT PT 4 6PB6-/4 6 / PB6-3/8 6 3/ PB0-/4 0 / PB0-3/8 0 3/ PB2-/2 2 / PB Adjustable ale Elbow 4 J 64PB4-/8 4 / PB4-/4 4 / PB6-/8 6 / PB6-/4 6 / PB8-/8 8 / PB8-/4 8 / PB8-3/8 8 3/ PB0-/4 0 / PB0-3/8 0 3/ PB2-/4 2 / PB2-3/8 2 3/ PB2-/2 2 / PB4-3/8 4 3/ PB4-/2 4 / J Pneumatic ivision Richland, ichigan
16 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings HEX J HEX 64SPB ompact Adjustable ale Elbow W7PP ale Run Tee Swivel J (PTF) ia. 64SPB4-/8 4 / SPB6-/8 6 / SPB6-/4 6 / SPB8-/8 8 / SPB8-/4 8 / SPB8-3/8 8 3/ SPB0-/4 0 / SPB0-3/8 0 3/ SPB2-/4 2 / SPB2-3/8 2 3/ SPB2-/2 2 / W7PP-2-2 /8 /8 7/ W7PP-5/32-2 5/32 /8 7/ W7PP-4-2 /4 /8 7/ W7PP-4-4 /4 /4 9/ W7PP-4-6 /4 3/8 / W7PP-5-2 5/6 /8 9/ W7PP-5-4 5/6 /4 9/ W7PP-6-4 3/8 /4 9/ W7PP-6-6 3/8 3/8 / W7PP-8-6 /2 3/8 / W7PP-8-8 /2 /2 7/ J 4 68PB Adjustable ale Elbow etric Straight 4 68PB45 4 5x PB65 6 5x SPB ompact Adjustable ale Elbow etric Straight J 68SPB45 4 5x SPB65 6 5x HEX J R64PB Swivel ale Branch Run Tee R68PB Adjustable ale Run Tee etric Straight 4 4 R68PB43 4 3x R68PB45 4 5x R68PB65 6 5x J R64PB4-/8 4 / R64PB4-/4 4 / R64PB6-/8 6 / R64PB6-/4 6 / R64PB8-/8 8 / R64PB8-/4 8 / R64PB8-3/8 8 3/ R64PB0-/4 0 / R64PB0-3/8 0 3/ R64PB2-/4 2 / R64PB2-3/8 2 3/ R64PB4-3/8 4 3/ R64PB4-/2 4 / Pneumatic ivision Richland, ichigan
17 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings HEX W72PP ale Branch Tee Swivel (PTF) ia. W72PP-2-2 /8 /8 7/ W72PP-3-2 3/6 /8 7/ W72PP-5/32-2 5/32 /8 7/ W72PP-4-2 /4 /8 7/ W72PP-4-4 /4 /4 9/ W72PP-4-6 /4 3/8 / W72PP-5-2 5/6 /8 9/ W72PP-5-4 5/6 /4 9/ W72PP-6-4 3/8 /4 9/ W72PP-6-6 3/8 3/8 / W72PP-8-4 /2 /4 9/ W72PP-8-6 /2 3/8 / W72PP-8-8 /2 /2 7/ S68PB Adjustable ale Branch Tee etric Straight TEPB End Expander S68PB43 4 3x S68PB45 4 5x S68PB65 6 5x TEPB S64PB Swivel ale Branch Tee 4 S64PB4-/8 4 / S64PB4-/4 4 / S64PB6-/8 6 / S64PB6-/4 6 / S64PB8-/8 8 / S64PB8-/4 8 / S64PB8-3/8 8 3/ S64PB0-/4 0 / S64PB0-3/8 0 3/ S64PB2-/4 2 / S64PB2-3/8 2 3/ S64PB4-3/8 4 3/ S64PB4-/2 4 / TRPB End Reducer 2 TRPB TRPB TRPB TRPB TRPB TRPB TRPB TRPB TRPB TRPB TRPB TRPB Pneumatic ivision Richland, ichigan
18 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings FPB Plug FPB FPB FPB FPB FPB FPB PW Female onnector (ickel Plated) (PTF) ia. 66PW-4-2 /4 /8 9/ PW-4-4 /4 /4 / PW-5-2 5/6 /8 9/ PW-5-4 5/6 /4 / PW-6-4 3/8 /4 / PW-6-6 3/8 3/8 3/ HEX B ust / Weld Spatter Boot B-4 / B-6 3/ B-8 / PWBH Female Bulkhead (ickel Plated) (PTF) P ax. ia. P HEX Bulkhead Hole ia. 66PWBH-4-4 /4 /4 / /6 66PWBH-6-6 3/8 3/ /8 66PWBH-8-6 /2 3/8 / PW Union (ickel Plated) O.. O.. ia. 62PW-4 / PW-5 5/ PW-6 3/ PW-8 / PWBH Bulkhead Union (ickel Plated) Bulkhead Hole ia. B P ax. 62PWBH-4 /4 9/6 / PWBH-5 5/6 5/8 3/ PWBH-6 3/8 3/4 7/ PWBH-8 /2 7/ P HEX W68PW ale onnector (ickel Plated) (PTF HEX ia. W68PW-4-2 /4 /8 / W68PW-4-4 /4 /4 9/ W68PW-4-6 /4 3/8 3/ W68PW-5-2 5/6 /8 9/ W68PW-5-4 5/6 /4 9/ W68PW-5-6 5/6 3/8 / W68PW-6-2 3/8 /8 5/ W68PW-6-4 3/8 /4 5/ W68PW-6-6 3/8 3/8 / W68PW-6-8 3/8 /2 7/ W68PW-8-4 /2 /4 3/ W68PW-8-6 /2 3/8 3/ W68PW-8-8 /2 /2 7/ Pneumatic ivision Richland, ichigan
19 atalog 9E-TK-90-5 Push-to-onnect, Prestolok etal Fittings 64PW Union Tee (ickel Plated) ia. 64PW-4 / PW-5 5/ PW-6 3/ PW-8 / W7PW ale Run Tee Swivel (ickel Plated) (PTF) HEX ia. W7PW-4-2 /4 /8 7/ W7PW-4-4 /4 /4 9/ W7PW-4-6 /4 3/8 / W7PW-5-2 5/6 /8 9/ W7PW-5-4 5/6 /4 9/ W7PW-6-4 3/8 /4 9/ W7PW-6-6 3/8 3/8 / W7PW-8-6 /2 3/8 / W7PW-8-8 /2 /2 7/ PW Union Elbow (ickel Plated) ia. 65PW-4 / PW-5 5/ PW-6 3/ PW-8 / W69PW ale Elbow Swivel 90 (ickel Plated) (PTF) HEX ia. W69PW-4-2 /4 /8 7/ W69PW-4-4 /4 /4 9/ W69PW-4-6 /4 3/8 / W69PW-5-2 5/6 /8 9/ W69PW-5-4 5/6 /4 9/ W69PW-6-2 3/8 /8 9/ W69PW-6-4 3/8 /4 9/ W69PW-6-6 3/8 3/8 / W69PW-6-8 3/8 /2 7/ W69PW-8-4 /2 /4 9/ W69PW-8-6 /2 3/8 / W69PW-8-8 /2 /2 7/ W72PW ale Branch Tee Swivel (ickel Plated) (PTF) HEX ia. W72PW-4-2 /4 /8 7/ W72PW-4-4 /4 /4 9/ W72PW-4-6 /4 3/8 / W72PW-5-2 5/6 /8 9/ W72PW-5-4 5/6 /4 9/ W72PW-6-4 3/8 /4 9/ W72PW-6-6 3/8 3/8 / W72PW-8-4 /2 /4 9/ W72PW-8-6 /2 3/8 / W72PW-8-8 /2 /2 7/ HPB Equal Union HPB HPB HPB HPB Pneumatic ivision Richland, ichigan
20 atalog 9E-TK-90-5 Fittings & Adapters 207ABH Anchor oupling 207P oupling 208P Reducer oupling 209P Bushing 20P ock ut Industrial Fittings Page 8 Page 8 Page 8 Page 8 Page 8 2P Square-head Plug 22P Union 23P ap 25P lose ipple 25P ong ipple 26P ipple Page 8 Page 8 Page 9 Page 9 Page 9 Page 9 28P -Head Plug 29P ountersunk Plug 220P Slotted-Head Plug 222P Adapter 200P-2200P Union Elbow 202P-2202P Street Elbow Page 9 Page 9 Page 20 Page 20 Page 20 Page P-2203P Union Tee 204P ale Elbow 2224P ale Branch Tee 2225P Street Tee 20P-220P 45 Female Elbow 2205P ross Page 20 Page 20 Page 2 Page 2 Page 2 Page 2 224P 45 Street Elbow Elbow FF44 ipple FH4 Adapter ale- 44 onnector etric Adapters BSP Page 2 Page 23 Page 23 Page 23 Page 23 K004 ross 0444 Tee W44 Bulkhead Female Union Page 23 Page 23 Page 23 6 Pneumatic ivision Richland, ichigan
21 atalog 9E-TK-90-5 Fittings ATERIAS OF OSTRUTIO Fittings: A345, A360, A377 EXAPE: 224P 2 2 OEATURE ATTRIBUTE: 2 Extrusion (not shown) Forging Street Elbow p 2 /8" 2 /8" APPIABE TUBE aterial: opper, brass, iron pipe size: /8, /4, 3/8, /2, 3/4, Pressure Range: Temperature Ranges: SPEIFIATIOS Up to,000 PSI -65 to +250 F All pipe fittings meet functional requirements of SAE J530 and SAE J53. s are made to ryseal standards. thread assembly guide (turns method) for ryseal threads with pre-applied Vibra Seal Straight Fittings. Tighten external thread into the internal thread. Finger Tight Wrench Tight 2. Tighten an additional 2 revolutions with a wrench up to 2 in. male pipe thread. Above 2 in., - 2 to 2-2 revolutions. Elbow or Tee Fittings. Tighten external thread into the internal thread. Finger Tight lockwise to align 2. Tighten an additional to - 2 revolutions with a wrench. 3. Tighten fitting, lockwise, to Align with Tubing (never counter clockwise). ote: To minimize the possibility of a leaking threaded joint after assembling male to female pipe threads, neither end should be backed out (loosened) once the assembly has been made. Wrench Tight 7 Pneumatic ivision Richland, ichigan
22 atalog 9E-TK-90-5 Fittings 207ABH Anchor oupling Female Straight ax. Bulk Head P B P B HEX Blkhd Hole ia. H HEX H ia. 207ABH-2 /8 5/ /8 5/6.50 5/ ABHS-2 /8 5/ /8 5/6.96 5/ ABH-4 /4 3/ /8.50 3/ ABHS-4 /4 3/ / ABH-6 3/ /8 -/ ABH-8 /2 -/ /4-3/8.50 -/ ABH-2 3/4-5/ /2 -/2.50-5/ ABH-6* -5/ /8.40 * ock Washer not Available 209P Bushing 2 HEX 2 ia. 209P-4-2 /8 /4 9/ P-6-2 /8 3/8 / P-6-4 /4 3/8 3/ P-8-2 /8 /2 7/ P-8-4 /4 /2 7/ P-8-6 3/8 /2 7/ P-2-2 /8 3/4 -/ P-2-4 /4 3/4 -/ P-2-6 3/8 3/4 -/ P-2-8 /2 3/4 -/ P-6-8 /2-3/ P-6-2 3/4-3/ P oupling HEX ia. 207P-2 /8 9/ P-4 /4 3/ P-6 3/8 7/ P-8 /2 -/ P-2 3/4-3/ P ock ut 20P-2 /8 PS /6.9 20P-4 /4 PS 7/ P-6 3/8 PS.25 20P-8 /2 PS -/8.25 HEX 2 208P Reducer oupling 2 HEX ia. 208P-4-2 /4 /8 3/ P-6-4 3/8 /4 7/ P-8-4 /2 /4 -/ P-8-6 /2 3/8 -/ P-2-6 3/4 3/8-3/ P-2-8 3/4 /2-3/ P Square-Head Plug 2P-2 /8 9/ P-4 /4 3/ P-6 3/8 7/ P-8 /2 9/ P-2 3/4 5/ P Union HEX 22P-4 /4-3/ P-6 3/8 -/ Pneumatic ivision Richland, ichigan
23 atalog 9E-TK-90-5 Fittings 23P ap HEX 23P-2 /8 9/ P-4 /4 / P-6 3/8 3/ P-8 /2 -/ P-2 3/4 -/ P ipple HEX ia. 26P-2 /8 7/ P-4 /4 9/ P-6 3/8 / P-8 /2 7/ P-2 3/4 -/ P lose ipple ia. 25P-2 / P-4 / P-6 3/ P-8 / P-2 3/ P ipple Reducers 2 HEX 2 ia. 26P-4-2 /4 /8 9/ P-6-2 3/8 /8 / P-6-4 3/8 /4 / P-8-4 /2 /4 7/ P-8-6 /2 3/8 7/ P-2-8 3/4 /2 -/ P ong ipple ia. 25P-2-5 /8 -/ P-4-5 /4 -/ P-6-5 3/8 -/ P-8-5 /2 -/ P-2-20 / P-4-20 / P / P-8-20 / P-2-25 /8 2-/ P-4-25 /4 2-/ P /8 2-/ P-8-25 /2 2-/ P-2-30 / P-4-30 / P / P-8-30 / P-2-35 /8 3-/ P-4-35 /4 3-/ P /8 3-/ P-8-35 /2 3-/ P -Head Plug 28P-2 /8 7/ P-4 /4 9/ P-6 3/8 / P-8 /2 7/ P-2 3/4 -/ P ountersunk -Head Plug 29P-2 /8 3/ P-4 /4 / P-6 3/8 5/ P-8 /2 3/8.6 29P-2 3/4 9/6.62 HEX HEX 9 Pneumatic ivision Richland, ichigan
24 atalog 9E-TK-90-5 Fittings 220P Slotted-Head Plug 200P 220P-2 / P-4 / P-6 3/ P Adapter P HEX 2 ia. 222P-2-2 /8 /8 9/ P-4-2 /4 /8 3/ P-4-4 /4 /4 3/ P-6-2 3/8 /8 7/ P-6-4 3/8 /4 7/ P-6-6 3/8 3/8 7/ P-8-4 /2 / P-8-6 /2 3/8 -/ P-8-8 /2 /2 -/ P-2-6 3/4 3/8-3/ P-2-8 3/4 /2-3/ P-2-2 3/4 3/4-3/ P 202P- 2202P 90 Street Elbow P 2 ia. 202P-2-2 /8 / P-2-2 /8 / PA-2-2* /8 / P-4-2 /4 / P-4-4 /4 / P-4-4 /4 / PA-4-4* /4 / P-4-6 /4 3/ P-6-4 3/8 / P-6-6 3/8 3/ P-6-6 3/8 3/ PA-6-6* 3/8 3/ *eets SAE imensions 203P- 2203P Union Tee 203P ia. 203P-2 / P-2 / P-4 / P-4 / P-6 3/ P-8 / P-8 / P-2 3/ P 200P- 2200P 90 Union Elbow ia. 200P-2-2 / P-2-2 / P-4-4 / P-4-4 / P-6-6 3/ P-6-6 3/ P-8-8 / P ale Elbow ia. 204P-2 / P-4 / P-6 3/ P-8 / Pneumatic ivision Richland, ichigan
25 atalog 9E-TK-90-5 Fittings 2224P ale Branch Tee ia. 2224P-2 / P-4 / P-6 3/ P-8 / P-2 3/ P ross ia. 2205P-2 / P-4 / P-6 3/ P-8 / P-2 3/ P Street Tee ia. 2225P-2 / P-4 / P-6 3/ P-8 / P-2 3/ P 45 Street Elbow ia. 224P-2-2 / P-4-4 / P-6-6 3/ P-8-8 / P 20P- 220P 45 Female Elbow 220P ia. 220P-2-2 / P-8-8 / Pneumatic ivision Richland, ichigan
26 atalog 9E-TK-90-5 etric Adapters Adapters: ATERIAS OF OSTRUTIO Brass APPIABE TUBE aterial: opper, brass, iron pipe PT: /8, /4, 3/8, /2 BSPT: /8, /4, 3/8, /2, 3/4, : /8, /4, 3/8, /2, 3/4, Pressure Range: Temperature Ranges: SPEIFIATIOS Up to,000 PSI -65 to +250 F A comprehensive range of adapters for PT, BSPT and pipe threads. Produced in both forgings and extrusions. Parker brass adapters are produced from forgings and extrusions to meet exacting requirements. The hot forging process increases the density of the material, refines the grain structure and improves material strength. 22 Pneumatic ivision Richland, ichigan
27 atalog 9E-TK-90-5 etric Adapters HEX Elbow /844B /8 4 5 /444B / /844B 3/ /244B / FF44 ipples HEX /8FF44B /8 4 9 /4FF44B / /8FF44B 3/ /2FF44B / KOO4 ross HEX /8KOO4B / /4KOO4B / /8KOO4B 3/ /2KOO4B / FH4 Adapter ale PTF PTF 2 HEX /8FH4-B /8 / /4FH4-B /4 / /8FH4-B 3/8 3/ /2FH4-B /2 / Tee HEX /8O444B / /4O444B / /8O444B 3/ /2O444B / /4O444B 3/ O444B onnector /844B /8 4 6 /444B / /844B 3/ /244B / /444B 3/ B 4 36 HEX W W44 Bulkhead Female Union Straight 4 HEX 4 W /8W44B /8 6x /4W44B /4 20x /8W44B 3/8 23x /2W44B /2 27x /4W44B 3/4 34x W44B 45x Unequal onnector 2 HEX /8x/444B /8 /4 7 8 /8x3/844B /8 3/ /8x/244B /8 / /4x3/844B /4 3/ /4x/244B /4 / /8x/244B 3/8 / Pneumatic ivision Richland, ichigan
atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationGroup 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
More informationTrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
More informationTo find the distributor nearest you, please visit our DISTRIBUTOR LOCATOR at
Pneumatic Products U.S. Distributor Network, Warning, Offer of Sale A Introduction DISTRIBUTION NETWORK At Parker, we have the largest global distribution network in motion and control, with over 7,500
More informationSection F Fast-Stor Hose and Fittings
ast-stor and ittings Table of ontents Back Section ast-stor and ittings ast-stor SX Air... 2 ast-stor Air... 3 Measuring Bulk... 4 ast-stor Accessories... 5 ast-stor ittings... 6-8 Selection Procedure...
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationValue Proposition. Applications/Markets. r Applications with long cycle life
Fluoropolymer Tubing - PVF Tubing Value Proposition Fluoride) is uoropolymer ion of or use in ons requiring ith low xhibits low le providing gth, excellent nd good emicals and c s PVF use in ultrand ground
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of.o.t. FMVSS 571.106 Meets Proposed imensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor
More informationTrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:
Parker s TrueSeal Fittings are lightweight, field attachable and connect to tubing without the use of tools. These all plastic push-to-connect fittings are manufactured from F compliant materials. Product
More informationPneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
More informationFlare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves
Flare Fittings SA 45 Flare eets SA Functional Requirements Resists Vibration Resists echanical Pull-out U isted Inverted Flare U isted conomical Steel ut option Access Valves Teflon Seal on Valve core
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationPneumatic Tubing. A. Polyethylene Fractional Metric. B. Nylon Fractional Metric Mini-Coils
A. Polyethylene Fractional Metric B. Nylon Fractional Metric Mini-Coils C. Polyurethane Fractional Metric EZ Strip Bonded Polyurethane Mini Coils D. Ny-Chem Kynar * PVDF Fractional Metric Mini-Coils E.
More informationVibra-Lok Fittings. Example: 68 VL V 4 2
Vibra-ok Fittings Advantages Vibra-ok provides a positive reliable seal under vibration conditions, mechanical shock or tube movement. The sleeve cushions the tubing permitting the tube to flex back and
More informationLF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
More informationPrestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationTubing. Thermoplastic. Fluoropolymer. Polyethylene Nylon Parprene TPE Polypropylene Polyurethane Clear Vinyl PTFE FEP PFA PVDF
Thermoplastic Polyethylene Nylon Parprene TP Polypropylene Polyurethane lear Vinyl luoropolymer PT P P PV luido View ontent Table of ontents Thermoplastic Introduction Thermoplastic oiled ir Hose & Intro...-4
More informationPneumatic Tubing. Nylon. Nylon Fractional Inch Tubing. Nylon Metric Tubing. Capillary Tubing
Pneumatic Tubing Nylon Nylon tubing is a popular choice for low pressure pneumatic applications because of its combination of flexibility and toughness. Nycoil uses a heat and light stabilized, very flexible
More informationLight Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.
Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators
More information20 Series Tube Fittings and Tubes
20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationSeal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
More informationInnovative Design Maximum Capability
Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationin stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of D.O.T. FMVSS 571.106 Meets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More information3 Terminals, Kits and Tools
3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 6 For more than 30 years, 3M has been a leading supplier of Scotchlok terminals, disconnects, connectors and tools for use in the
More informationBall Valves. Plug Valves. 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented. 1/8" to 1/4" Pipe Size. Section B. Pneumatic
Ball Valves 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented Plug Valves 1/8" to 1/4" Pipe Size B Section B Ball Valve Basic Features...2 Ball Valve Part umbers & imensions... 3-4 Plug Valve Basic Features...5
More informationPar-Barb Thermoplastic Fittings
atalog 350E Par-arb Thermoplastic Fittings TERIS OF OSTRUTIO OIES: WSHER: WHITE YO, K POYPROPYEE UIPREE OETURE EXPE: 35H- 4-6 TTRIUTE: 35 PSTI E OET H R 4 /4 I.. 6 3/8 PT WHITE YO SPEIFITIOS PRESSURE RGE:
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationCartridges and Customised Products
Cartridges and Customised Products 2-2 Cartridges and Customised Products 2-3 2-4 Cartridges Polymer Cartridges Compressed Air Fluids and Gases 3100 Carstick Page 2-8 3086 Quick Fitting Page 2-8 3089 Quick
More informationSuper-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationTube and Pipe Fitting Master Catalog. Product Focus
Tube and Pipe Fitting aster atalog Product Focus Table of ontents APPIATIO ATA Safety Information 1-2 Visual Quick Reference Index 3-13 umbering Systems 14 Tube Fitting Selector hart 15 Fitting Identification
More informationLubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationFLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationMolded Compression Tube Fittings
Molded ompression Tube Refer to safety information regarding tubing selection on page 1. lastic Weatherhead Molded ompression Tube izes: vailable in sizes 1/8" through 3/4" tube O (7/8" tube O and metric
More informationMINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
More informationShaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560
Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;
More informationInsert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More informationVISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
More informationPrestolok. Spark resistant push-in fittings for fluids. Catalogue /UK
Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae
More informationShaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last
Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run
More informationEdition 1
RAYPEX 800-628-5044 Edition 1 RELATIVE ORDER OF RESISTANCE TO GAS PENETRATION Impurity levels after six hours of flushing with helium 4.5 (100 1/h) Moisture (H20) Oxygen (O2) 1. Stainless Steel 1-2 ppm
More informationMessing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
More informationBrass Fittings and Valves
Brass Fittings and Valves Catalog 3501E USA January 2004 The World Standard OTSEGO, ICHIGA AKEVIEW, ICHIGA ABIO, IIAA AEASSE, FRACE WARIG FAIURE OR IPROPER SEECTIO OR IPROPER USE OF THE PROUCTS A/OR SYSTES
More informationLIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
More informationPneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationTube Fitting Stainless SUS316 Compression Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Compression Fitting of Corrosion Resistant Steel Tube Fitting SUS316 Compression Fitting 120 Chemical Industry Medical Industry
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationMur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
More informationFITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
More informationTube Fitting EG Series
FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting Type for Anti-Static Environment 196 ESD Static dissipative Resin Suitable for Electrostatic dissipating and Antistatic Applications. Anti-spatter
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationVACUUM AND CHARGING HOSES
VACUUM AND HOSES RECOVERY YELLOW JACKET HVAC&R VACUUM SUPEREVAC AND HOSES YELLOW JACKET PLUS II Charging Hoses Double barrier protection for CFC, HCFC and HFC refrigerants 20 EDITION 62 CATALOG RECOVERY
More informationCable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationTubing. Bend With Us
TABLE OF CONTENTS Tubing ITEM PAGE # ITEM PAGE # Tubing PVC General Technical Tubing Informatino Clear PVC Tubing...413 Tube Selection and Sizing...410 Clear-Braided Reinforced Tubing...414 Steel Steel
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationFluid Power Products Catalog FC02E
Fluid Power Products atalog F02 Introduction xcellence Through Innovation... Step head In Technology, Quality Rectus World Headquarters Nussdorf, Germany & Service... Since its inception in 1958, Nycoil
More information, ittings, Accessories, and Table of ontents How to Use This atalog / How to Order, ittings and Assemblies. : Hydraulic Braided 601, AX, 421, 482T/ST, BXX, 301, 431, 436, 381, 471T/ST, 472T, 451T/ST, 351T/ST;
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationMetering Valves Catalog 4170-MV December 2010
Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering
More informationTube Fitting PP Series
http://www.pisco.co.jp FITTING ONTOLLE VALVE TUE MAKE-TO-ODE PODUTS Push-In Fitting Type for lean Environment Tube Fitting 178 opper alloy free material Nongrease lean-room packaging option hemical Industry
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationVacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More informationIndustry Standouts for Over 50 Years
» Pneumatic Products » Industry Standouts for Over 50 Years The benefits of an innovative, pneumatic coupling design were solid enough to single-handedly launch CEJN in 1955. This reliable, easy-to-handle
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationH/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications
Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance
More informationTubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationlegris products are available from: Maryland Metrics
legris products are available from: Maryland Metrics 2003 2005 New Products atalog web: mdmetric.com email: sales@mdmetric.com push-to-connect fittgs 9000 safety coupler mi ball valves staless steel range
More informationSUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More information