Fittings Metal Push-To- Connect Fittings. We make things MOVE

Transcription

1 Fittings Metal Push-To- Connect Fittings We make things MOVE

2 Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating Ranges 5 O.D.s and Tolerances 5 Recommended Tightening Torques 6 How to Specify 6 Dimensions 6 Specifications 10 Product Features 10 Push-In Fittings (Metric) 10 Features and Benefits 11 How It Works 11 Materials of Construction 11 Fluid 11 Operating Ranges 11 O.D.s and Tolerances 11 Recommended Tightening Torques 12 How to Specify 12 Dimensions 12 Specifications 17 How to Order

3 Fittings Bimba s expanded metal fittings line boasts nearly 400 models, options, and sizes. Each fitting is constructed from corrosion-resistant metal to handle the most caustic and abrasive fluid applications. They are quick to add and remove, with easy tube insertion, making them ideal for completing pneumatic circuits. For Technical Assistance:

4 Product Features Push-In Fittings stop O -ring Collet Internal hexagon Body sealant Features and Benefits For simple and quick assembly of pneumatic circuits Positive tube connection Wide range of types available Reliable and corrosion resistant 4 Fittings BIMBA BIM-FT-0718 Catalog 2018

5 How It Works Materials of construction Body Material: Swivel Fitting: Collet: O-ring: Sealing washer (parallel male threads): Tubing: Nickel-plated brass Nickel-plated brass Nickel-plated brass Silicone-free Nitrile Silicone-free Nitrile Nylon 11 or 12, polyurethane (95 durometer or above) and LDPE (Low Density Polyethylene) Notes: Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall. Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads. O.D.s and Tolerances Fluid Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction.* * For other types of fluids or compressed gases, please consult factory. Operating Ranges Ranges for normal operation of fittings. Working Pressure: Working Temperature: **Flow Control working pressures: 5 to 150 psig (.3 to 10 bar) 29.5" Hg vacuum to 260 psig (750 mm Hg to 18 bar)* 0 F to 175 F (-20 C to 80 C) Request FPM option on selected part numbers for extended temperature range : 0 F to 350 F (-20 C to 180 C) O.D. Nylon Polyurethane 1/8" to 1/2" " (+0.05 mm) ±0.005" (3 mm to 14 mm) " (-0.10 mm) (±0.12 mm) Recommended Tightening Torques Tightening torque ft lbs (N*m) UNF.75 1 (1-1.4) 1/8" NPT ( ) 1/4" NPT ( ) 3/8" NPT ( ) 1/2" NPT ( ) For Technical Assistance:

6 How To Specify Dimensions in (mm) V A T ØS A O.D. T / S Tubing Stop V 1/8" 0.09 (2.3) 0.53 (13.5) 0.26 (6.5) 5/32" (4) 0.11 (2.8) 0.55 (14.0) 0.30 (7.5) 3/16" 0.13 (3.4) 0.59 (15.1) 0.38 (9.7) 1/4" 0.17 (4.4) 0.61 (15.5) 0.42 (10.7) 5/16" (8) 0.24 (6.0) 0.65 (16.5) 0.51 (13.0) 3/8" 0.30 (7.6) 0.83 (21.0) 0.59 (15.1) 1/2" 0.38 (9.6) 0.96 (24.3) 0.71 (18.1) Specifications Union tube 1/8" /32" /16" /4" /16" /8" /2" * Reducing union with 1/8" and 1/4" connections Conversion Union (Inch tube to mm tube) (in) (mm) 5/ / / / / / Bulkhead Union Metric 1/8" M10x /32" M10x /16" M12x /4" M14x /16" M16x /8" M20x /2" M24x End Expander/Reducer Reducing Stem 1/8" 5/32" /8" 1/4" /32" 1/4" /32" 5/16" /32" 3/8" /16" 1/4" /4" 5/16" /4" 3/8" /4" 1/2" /16" 1/2" /8" 1/2" Expanding 1/4" 1/8" /4" 5/32" Union Elbow 1/8" /32" /16" /4" /16" /8" /2" Fittings BIMBA BIM-FT-0718 Catalog 2018

7 How To Specify Specifications Union Tee 1/8" /32" /16" /4" /16" /8" /2" Parallel Union Y"* 5/32" 5/32" /32" 1/4" /4" 1/4" /16" 5/16" *Body Material: Thermoplastic Male Adapter - Conversion (Inch O.D. to ISO R [Male] ) ISO R Part Number 1/8" 1/ /32" 1/ /32" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /16" 3/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ Stem Adapter NPT 3/32" /4" 1/ /4" 1/ Note: Not suitable for use with C Male Adapter NPT Or UNF 1/8" UNF /8" 1/ /8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /16" 1/ /16" 1/ /4" UNF /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /16" 3/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ Male Adapter - Conversion (mm O.D. to NPTF [Male] ) A B NPT Part Number / / / / / / / / / / / / / / / / / Female Bulkhead Adapter NPT Female 1/4" 1/ /8" 1/ For Technical Assistance:

8 How To Specify Specifications Female Adapter Extended Swivel Male Elbow NPT 1/8" 1/ /8" 1/ /32" 1/ /32" 1/ /4" 1/ /4" 1/ /16" 1/ /16" 1/ /8" 1/ /8" 3/ NPT 5/32" 1/ /4" 1/ /4" 1/ /8" 1/ /8" 3/ Swivel Male Elbow Fixed Male Elbow NPT 1/8" 1/ /32" 1/ /32" 1/ /16" 1/ /16" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ ISO 1/4" G1/ /4" G1/ CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. Swivel Female Elbow NPT 1/8" 1/ /32" 1/ /32" 1/ /4" 1/ /4" 1/ /8" 1/ /2" 3/ Swivel Male Elbow CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. NPT or UNF 1/8" UNF /8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /16" 1/ /4" UNF /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. Swivel Male Tee NPT or UNF 1/8" UNF /8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /16" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 1/ /2" 3/ /2" 1/ CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. 8 Fittings BIMBA BIM-FT-0718 Catalog 2018

9 How To Specify Specifications Swivel Male Side Tee NPT or UNF 1/8" 1/ /8" 1/ /32" UNF /32" 1/ /32" 1/ /4" 1/ /4" 1/ /4" 3/ /16" 1/ /16" 1/ /8" 1/ /8" 1/ /8" 3/ /8" 1/ /2" 3/ /2" 1/ Plug* Stem 1/8" /4" /8" * Material: Nickel plated Brass Male Swivel Y* NPT 1/4" 1/ /4" 1/ *Material: Thermoplastic CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. For Technical Assistance:

10 Product Features Push-In Fittings (Metric) stop O -ring Collet Internal hexagon Body sealant Features and Benefits Compact units featuring retained collets and positive tube anchorage Silicone free O -ring seals Non-PTFE based thread sealant on all BSP taper threads Easy tube insertion for rapid assembly Internal hexagon on straight adaptors allows assembly in confined spaces Wide range of types available Reliable and corrosion resistant 10 Fittings BIMBA BIM-FT-0718 Catalog 2018

11 How It Works Materials of construction Body Material: Swivel Fitting: Collet: O-ring: Sealing washer (parallel male threads): Tubing: Nickel-plated brass Nickel-plated brass Nickel-plated brass Silicone-free Nitrile Silicone-free Nitrile Nylon 11 or 12, polyurethane (95 durometer or above) and LDPE (Low Density Polyethylene) Notes: Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall. Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads (ISO R). O.D.s and Tolerances Fluid Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction. * For other types of fluids or compressed gases, please consult factory. Operating Ranges Ranges for normal operation of fittings. Working Pressure: Working Temperature: * Flow Controls working pressures:.3 to 10 bar (5 to 150 psig) 750 mm Hg to 18 bar (29.5" Hg vacuum to 260 psig) -20 C to 80 C (0 F to 175 F) Request FPM option on selected part numbers for extended Temperature range: -20 C to 180 C (0 to 350 F) O.D. Tolerances O.D. Nylon Polyurethane 4 mm to 5 mm mm (+0.002") (5/32" to 3/16") mm (-0.003") ±0.10 mm 6 mm to 14 mm mm (+0.002") (±0.004") (1/4" to 1/2") mm (-0.004") LDPE Tolerances specified in DIN or BS54-09/1:1976 Recommended Tightening Torques Size Tightening Torque Nm (ft lbs) ISO R ISO G* M ( ) 1/ ( ) 7-9 ( ) 1/ ( ) 9-12 ( ) 3/ ( ) ( ) 1/ ( ) ( ) * Lower torques can be used to achieve a seal but these figures are recommended to provide some vibration resistance. For Technical Assistance:

12 How To Specify Dimensions mm (in.) V A T ØS A O.D. S T Tubing Stop 4 (5/32") 2.8 (.11) 14.0 (.55) 7.5 (.30) (.13) 15.0 (.59) 10.0 (.39) (.17) 15.5 (.61) 11.0 (.43) 8 (5/16") 6.0 (.24) 16.5 (.65) 13.0 (.51) (.30) 21.0 (.83) 14.5 (.57) (.38) 24.5 (.96) 18.0 (.71) (.45) 24.5 (.96) 20.0 (.79) V Specifications Union Conversions Union (Inch tube to mm tube) in mm 5/ / / / / / Bulkhead Union Metric Union Elbow 4 M10 x M12 x M14 x M16 x M20 x M24 x Fittings BIMBA BIM-FT-0718 Catalog 2018

13 How To Specify Specifications End Expander/Reducer Stem Not suitable for use with C Pneumatic Male Adapter NPT / / / / / / / / / / / / / / / / / Union Tee ISO R Union Y Male Adapter - Conversion (Inch O.D. to ISO R (Male) ) 4 1/ / / / / / / / / / / / / / / / / / / For Technical Assistance:

14 How To Specify Specifications ISO G Male Adapter ISO G or Metric 4 M5 x / / M5 x / / M5 x / / / / / / / / / / / / / ISO G Male Connector Stem Elbow Stem Product Number ISO R Stem Adapter Stem ISO R 6 1/ / ISO G Stem Adapter Stem ISO G 6 1/ / / / / / ISO G Female Adapter ISO G or Metric 4 1/ / / / / / / / Fittings BIMBA BIM-FT-0718 Catalog 2018

15 How To Specify Specifications ISO R Male Fixed Elbow ISO R 4 1/ / / / / / / / / / / / / / ISO R Swivel Male Elbow ISO R 4 1/ / / / / / / / / / / / / / / / / / / ISO G Swivel Male Elbow ISO G or Metric 4 M5 x / / M5 x / M5 x / / / / / / / / / / / / / / / ISO R Swivel Male Tee A tube B ISO R 4 1/ / / / / / / / / / CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. For Technical Assistance:

16 How To Specify Specifications ISO G Swivel Male Side Tee A tube CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. ISO G Swivel Male Tee A B ISO G or Metric B ISO G or Metric 6 1/ / M5 x / / / / / / ISO R Swivel Male Side Tee A B ISO R 4 1/ / / / / / / / / CAUTION: Swivel adapters are not suitable for use in continuously rotating or gyrating applications. 16 Fittings BIMBA BIM-FT-0718 Catalog 2018

17 How to Order The model number of Bimba push-to-connect fittings consists of an alphanumeric cluster designating product series, threading, fitting shape, tube size, thread size, and branding, which together make up the complete part number to use in ordering. Use the ordering information below to build a valid part number. An example of a basic imperial-sized male elbow fitting with an ISO R thread, 1/2 tube size, and 1/2 thread is shown below. 0 No port thread 1 2 ISO R (taper BSPT) ISO G + MS (parallel BSP) 4 NPTF Size Inch OD Metric OD 01 1/8 04 4mm 02 5/ mm 03 3/ mm 04 1/4 08 8mm 05 5/ mm 06 3/ mm 07 1/ mm 618 Branding Bimba labelled Series Brass push-in fittings (metric) nickel plate and washers, sealant, assembled Brass push-in fittings (inch) nickel plate and washers, sealant, assembled Fitting Shape 04 Plug 15 Stem adapter 20 Union 23 end expander/ reducer 25 Male connector 26 Female connector Size 18 1/8 28 1/4 38 3/8 48 1/ UNF 05 M5 x Bulkhead union 32 Female bulkhead connector 37 Conversion union 40 Union elbow 43 Stem elbow 45 Male elbow 47 Swivel male elbow 48 Swivel female elbow 54 Extended swivel male 60 Union tee 67 Swivel male tee 68 Swivel female elbow 82 Parallel union Y 88 Parallel male Y swivel For Technical Assistance:

18 Notes 18 Fittings BIMBA BIM-FT-0718 Catalog 2018

19 Notes

20 IMI Precision Engineering operates four global centres of technical excellence and a sales and service network in 75 countries, as well as manufacturing capability in the USA, Germany, China, UK, Switzerland, Czech Republic, Mexico and Brazil. For information on all IMI Precision Engineering companies visit Supported by distributors worldwide. Due to our policy of continuous development, Bimba reserve the right to change specifications without prior notice. BIM-PFF-0718 Bimba S. Governors Hwy University Park, IL Tel: Fax: For further information, scan this QR code or visit