TrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:

Transcription

1 Parker s TrueSeal Fittings are lightweight, field attachable and connect to tubing without the use of tools. These all plastic push-to-connect fittings are manufactured from F compliant materials. Product Features: vailable in cetal, Polypropylene and Kynar materials P seal in acetal and polypropylene, Fluorocarbon in Kynar ollet Gripping Teeth Griping ring with stainless steel bite edge or with an engineered thermoplastic bite edge F compliant, SF-51 and gray acetal fittings are SF-61 arkets: Food Potable Water hemical Filtration pplications: ir Water Soft rinks eer Wine yes Plastic ody O-Ring Specifications: Pressure Range cetal and Kynar: Polypropylene: *Vacuum rating to 28 inches of Hg at room temperature Temperature Range cetal: Polypropylene: Kynar: 1/4", 5/16", 3/8" Vacuum to 300 psi 1/2" Vacuum to 250 psi 1/4", 3/8", 1/2" Vacuum to 150 psi -20 to +180 F 0 to +225 F 0 to +275 F ssembly Instructions 1. ut tubing square and clean. (Use a Parker plastic tube cutter, Part o. PT.) 2. ark from end of tube length of insertion (see table right). 3. Push tube into the fitting until it bottoms out. 4. To remove, depress collet and pull tubing out. O.. TOR ISRTIO PTH 5/32 ±.005 9/16 1/4 ± /16 ompatible Tubing: Polyeytylene Polypropylene ylon Vinyl Fluoropolymer Polyurethane Kynar is a registered trademark of The rkema Group 5/16 ± /16 3/8 ±.005 3/4 1/2 ±.005 7/8 Parker Hannifin orporation Fluid System onnectors Otsego, I 17

2 atalog 3501 Tube to PTF ale onnector p. 19 S ale lbow Swivel p. 20 RS ale Run Tee Swivel p. 20 TS ale ranch Tee Swivel p. 20 T ale Standpipe p. 21 ale lbow p. 23 F Faucet dapter F Female onnector F Female lbow ST Straight Thread Tube to Female US Tube to Female PTF Tube to Straight Thread p. 21 p. 21 p. 22 p. 23 FF 45 Female Flare U Union lbow TU Union Tee WY Union Y U Union Tube to Female Flare Tube to Tube p. 21 p. 19 p. 19 p. 19 p. 20 U ross U ulkhead Union TU Tube lbow Union R Tube Reducer ulkhead Union Plug-ins p. 21 p. 22 p. 22 p. 22 V heck Valve V Kynar heck Valve P ap T arbed onnector T arbed onnector heck Valve uxiliary omponents p. 25 p. 25 p. 22 p. 23 p. 23 TP Plug TF Faucet dapter TF Faucet dapter S Safety lip TS Tube Support QRT Release Tool TS artridge p. 23 p. 21 p. 21 p. 28 p. 28 p. 28 p. 24 V ale lbow VF Female lbow VU Union onnector VU lbow Union V ale onnector VF Female onnector all Valves p. 26 p. 26 p. 27 p. 27 p. 27 p. 27 VTU lbow Union p. 27 Parker Hannifin orporation Fluid System onnectors Otsego, I 18

3 atalog ale onnector T P PP P TUR F O O.. PTF TH OVR GTH HO 42-G PP42 F42 1/4 1/8 11/ G PP44 F44 1/4 1/4 11/ G PP46 F46 1/4 3/8 11/ G F52 5/16 1/8 13/ G F54 5/16 1/4 13/ G 5/16 3/8 13/ TU - Tee Union Tube-to-Tube T P PP P TUR F O.. RU ST HO 4TU4-G PP4TU4 F4TU4 1/4 1/ TU5-G F5TU5 5/16 5/ TU4-G PP6TU4 F6TU4 3/8 1/ TU6-G PP6TU6 F6TU6 3/8 3/ TU8-G PP8TU8 F8TU8 1/2 1/ For nonstandard plastic collet, remove -G suffix. 62-G F62 3/8 1/8 13/ G PP64 F64 3/8 1/4 13/ G PP66 F66 3/8 3/8 13/ G F68 3/8 1/2 15/ G PP86 F86 1/2 3/8 15/ G PP88 F88 1/2 1/2 15/ For nonstandard plastic collet, remove -G suffix. WY - Y Union W Tube-to-Tube T P PP P TUR F O.. IT RU OUTT ST W HO 5WY5-G 5/16 5/ WY4-G 3/8 1/ WY5-G 3/8 5/ WY6-G 3/8 3/ U - lbow Union Tube-to-Tube T P PP P TUR F O.. HO 4U4-G PP4U4 F4U4 1/ U4-G 5/16-1/ U5-G F5U5 5/ U4-G PP6U4 F6U4 3/8-1/ U5-G 3/8-5/ U6-G PP6U6 F6U6 3/ U6-G 1/2-3/ U8-G PP8U8 F8U8 1/ For nonstandard plastic collet, remove -G suffix. Parker Hannifin orporation Fluid System onnectors Otsego, I 19

4 atalog 3501 S - ale lbow Swivel T P PP P TUR F O.. PTF TH HO 4S2-G PP4S2 F4S2 1/4 1/8 9/ S4-G PP4S4 F4S4 1/4 1/4 11/ S6-G PP4S6 F4S6 1/4 3/8 13/ S2-G 5/16 1/8 9/ S4-G 5/16 1/4 11/ S6-G 5/16 3/8 13/ S2-G F6S2 3/8 1/8 9/ S4-G PP6S4 F6S4 3/8 1/4 13/ S6-G PP6S6 F6S6 3/8 3/8 13/ S4-G 1/2 1/4 13/ S6-G PP8S6 1/2 3/8 13/ S8-G PP8S8 1/2 1/ * Part consists of elbow union and tube stem adaptor. ote: ssemblies with metal gripper collets are permanent. ssemblies with plastic collets can be taken apart. TS - ale Tee Swivel T P PP P TUR F O O.. PTF TH HO 4TS2-G PP4TS2 F4TS2 1/4 1/8 9/ TS4-G PP4TS4 F4TS4 1/4 1/4 11/ TS2-G 5/16 1/8 9/ TS4-G 5/16 1/4 11/ TS6-G 5/16 3/8 13/ TS2-G F6TS2 3/8 1/8 9/ TS4-G PP6TS4 F6TS4 3/8 1/4 13/ TS6-G PP6TS6 F6TS6 3/8 3/8 13/ TS4-G 1/2 1/4 13/ TS6-G PP8TS6 1/2 3/8 13/ TS8-G PP8TS8 1/2 1/ * Part consists of tee union and tube stem adaptor. ote: ssemblies with metal gripper collets are permanent. ssemblies with plastic collets can be taken apart. RS - ale Run Tee Swivel T P PP P TUR F O O.. PTF TH HO 4RS2-G PP4RS2 F4RS2 1/4 1/8 9/ RS4-G PP4RS4 F4RS4 1/4 1/4 11/ RS2-G 5/16 1/8 9/ RS4-G 5/16 1/4 11/ RS6-G 5/16 3/8 13/ RS4-G PP6RS4 F6RS4 3/8 1/4 13/ RS6-G PP6RS6 F6RS6 3/8 3/8 13/ RS4-G 1/2 1/4 13/ RS6-G PP8RS6 1/2 3/8 13/ RS8-G PP8RS8 1/2 1/ *Part consists of tee union and tube stem adaptor. ote: ssemblies with metal gripper collets are permanent. ssemblies with plastic collets can be taken apart. U - Union onnector Tube-to-Tube T P PP P TUR F O.. OVR GTH HO 4U4-G PP4U4 F4U4 1/ U4-G 5/16-1/ U5-G F5U5 5/ U4-G PP6U4 F6U4 3/8-1/ U5-G 3/8-5/ U6-G PP6U6 F6U6 3/ U5-G 1/2-5/ U6-G PP8U6 1/2-3/ U8-G PP8U8 F8U8 1/ For nonstandard plastic collet, remove -G suffix. Parker Hannifin orporation Fluid System onnectors Otsego, I 20

5 atalog 3501 U - ross Union Tube-to-Tube T P PP P TUR F O.. HO 4U4-G 1/ U6-G 3/ For nonstandard plastic collet, remove -G suffix. FF - 45 Female Flare Tube-to-Flare T P PP P TUR F O.. UF-2 THR OVR GTH HO 4FF4-G PP4FF4 F4FF4 1/4 7/ / FF4-G F6FF4 3/8 7/ / FF6-G PP6FF6 F6FF6 3/8 5/ For nonstandard plastic collet, remove -G suffix. F - Faucet dapter Tube-to-Faucet T P PP P TUR F O.. US-2 THR OVR GTH HO 4F7-G PP4F7 F4F7 1/4 7/ / F7-G 5/16 7/ / F7-G PP6F7 F6F7 3/8 7/ / For nonstandard plastic collet, remove -G suffix. T - Tube Stem dapter Tube Stem-to-Pipe T P PP P TUR F O.. PTF THR OVR GTH HO 4T2 PP4T2 F4T2 1/4 1/8 9/ T4 PP4T4 F4T4 1/4 1/4 11/ T2 5/16 1/8 9/ T4 F5T4 5/16 1/4 11/ T6 5/16 3/8 13/ T4 PP6T4 F6T4 3/8 1/4 13/ T6 PP6T6 F6T6 3/8 3/8 13/ T4 1/2 1/4 13/ T6 PP8T6 1/2 3/8 13/ T8 PP8T8 1/2 1/ F - Female onnector PTF T P PP P TUR F O.. PTF THR OVR GTH HO 4F2-G PP4F2 F4F2 1/4 1/8 11/ F4-G PP4F4 F4F4 1/4 1/4 23/ F4-G F5F4 5/16 1/4 13/ TF - Tube Faucet dapter (Female Thread) T ST O.. THR 5F6-G 5/16 3/ F4-G PP6F4 F6F4 3/8 1/4 13/ F6-G PP6F6 F6F6 3/8 3/ W6TF7-G 3/8 7/ W6TF8-G 3/8 1/2-14 PS W6TF9-G 3/8 9/ F8-G 3/8 1/2 1-1/ F6-G PP8F6 F8F6 1/2 3/8 1-1/ F8-G PP8F8 F8F8 1/2 1/2 1-1/ For nonstandard plastic collet, remove -G suffix. TF - Tube Faucet dapter (ale Thread) T ST O.. THR W6TF7-G 3/8 7/ W6TF8-G 3/8 1/2-14 PS W6TF9-G 3/8 9/ Parker Hannifin orporation Fluid System onnectors Otsego, I 21

6 atalog 3501 U - ulkhead Union Tube-to-Tube T P PP P TUR F O OVR GTH P X. W THK. P X HO KH HO RI 4U4-G PP4U4 F4U4 1/4 15/16 15/ /8 5U5-G F5U5 5/16 1-1/16 1-1/ U4-G PP6U4 3/8-1/4 1-1/16 1-1/ U6-G PP6U6 F6U6 3/8 1-1/16 1-1/ R - Tube Reducer Tube-to-Tube Stem T P PP P TUR F O.. ST O.. HO 4R5-G PP4R5 1/4 5/ R6-G PP4R6 1/4 3/ R6-G 5/16 3/ R8-G 5/16 1/ R8-G 3/8 1/ For nonstandard plastic collet, remove -G suffix. 8U8-G F8U8 1/2 1-1/4 1-1/ /8 For nonstandard plastic collet, remove -G suffix. P - Tube ap TU - Tube lbow Union T P PP P TUR F O.. OVR GTH 4P-G PP4P F4P 1/4.77 Tube-to-Tube Stem 6P-G PP6P 3/ T P PP P TUR F O.. ST O.. HO For nonstandard plastic collet, remove -G suffix. 4TU4-G PP4TU4 F4TU4 1/4 1/ TU6-G F4TU6 1/4 3/ TU5-G F5TU5 5/16 5/ TU4-G F6TU4 3/8 1/ TU6-G PP6TU6 F6TU6 3/8 3/ TU8-G PP8TU8 F8TU8 1/2 1/ For nonstandard plastic collet, remove -G suffix. F - Female lbow T P PP P TUR F O.. PTF THR HO 4F4-G 1/4 1/ F4-G 3/8 1/ F6-G 3/8 3/ For nonstandard plastic collet, remove -G suffix. Parker Hannifin orporation Fluid System onnectors Otsego, I 22

7 atalog ale lbow T P PP P TUR F O.. PTF TH HO 42-G PP42 F42 1/4 1/ G PP44 F44 1/4 1/ G PP46 F46 1/4 3/ G F54 5/16 1/ T - Tube lbow arb onnector T PP TUR ST O.. I.. HO 4T4 PP4T4 F4T4 1/4 1/ T4 PP6T4 F6T4 3/8 1/ T6 PP6T6 F6T6 3/8 3/ T8 1/2 1/ G 5/16 3/ G PP64 F64 3/8 1/ G PP66 F66 3/8 3/ For nonstandard plastic collet, remove -G suffix. TP - Plug T PP TUR FITTIG OVR GTH ST - Straight Thread Tube-to-ale O-Ring oss 4TP PP4TP F4TP 1/ TP PP6TP F6TP 3/ TP PP8TP 1/ T P PP P TUR F O.. UF-2 TH OVR GTH HO 6ST9-G F6ST9 (+) 3/8 9/ / For nonstandard plastic collet, remove -G suffix. T - Tube-to-arb onnector T PP TUR ST O.. I.. OVR GTH HO 4T4 PP4T4 F4T4 1/4 1/ T4 F6T4 3/8 1/ T6 PP6T6 F6T6 3/8 3/ T6 1/2 3/ T8 F8T8 1/2 1/ Parker Hannifin orporation Fluid System onnectors Otsego, I 23

8 atalog 3501 TS - artridge Insert PRT UR WITH P O.. * ITR ±002 ITR ±003 ITR ±003 ITR XIU TS4-G 1/ PTH ±002 F PTH ±002 G PTH ±002 H* TRI OF PORTS IIU TS6-G 3/ TS8-G 1/ R Ø Ø 32 Ø Ø H inimum Port Spacing F G Parker TrueSeal artridge Inserts: llow you to machine or mold a tube connection into your equipment or components. y using cartridge inserts, you will reduce your material and assembly costs, reduce potential leak paths, and give your equipment a new, clean profile by eliminating the need for threaded connections. TS artridge Inserts consist of 1 o-ring, 1 cartridge, and 1 collet. *artridge inserts are rated at 150 psi in ports dimensioned as above and having oryl as the receiving material. Other materials may have different ratings and require different port dimensions. onsult the Fluid System onnectors ivision when using polypropylene, unfilled polypropylene, S or ylon. ssembly Instructions: 1. achine or mold the receiving orifice as per the above dimensions. 2. Place the cartridge insert squarely onto the prepared port opening making sure that the barbs of the cartridge are going into the hole and the lettering on the face of the cartridge is visible. 3. Using a rubber mallet or press, insert the cartridge into the first gland orifice until its face is flush with the top surface of the port. 4. Insert the o-ring into the cartridge and seat it evenly into the second gland orifice. 5. Insert the collet into the cartridge opening. 6. Insert tubing. Parker Hannifin orporation Fluid System onnectors Otsego, I 24

9 atalog 3501 TrueSeal heck Valves Push-to-onnect check valves that ensures protection against reversal of flow. The valves have an arrow molded into the body to indicate the direction of flow. Valves are designed for connection with either thermoplastic or soft metal tubing and are intended for use with liquids only. aterials of onstruction ody cetal O.. O-ring etal Grip dge Working Pressure Temperature Range racking Pressure P 300 Stainless Up to 150 PSI depending on tubing being used +34 F (1 ) to +150 F (65 ) 1/3 PSI V heck Valve PRT O. 4V4-G 1/ V5-G 5/ V6-G 3/ V8-G 1/ O.. ORY is a registered trademark of the General lectric o. PVF heck Valves aterials of onstruction ody Kynar O-ring Fluorocarbon etal Grip dge Stainless Steel Working Pressure Up to 300 PSI Temperature Range 0 F to 250 F V Kynar heck Valves PRT UR O.. PTF THR RKIG PRSSUR PSI F6V4-HK-05 3/8 1/ / F6V4-HU-15 3/8 1/ / F6V4-HR-30 3/8 1/ / F6V4-HGR-40 3/8 1/ / ote: For check valve to function properly tubing needs to be installed Parker Hannifin orporation Fluid System onnectors Otsego, I 25

10 atalog 3501 Polypropylene all Valves For proven leak-free performance, specify Polypropylene all Valves. Their corrosion-resistant, all-plastic design makes them ideal for water filtration units, coffee and beverage machines and a wide variety of other fluid applications. Polypropylene material meets all F and SF-51 requirements for food contact. Features/enefits: Precision molded, all-plastic design is leak free and corrosion resistant. Polypropylene material offers a wider chemical acceptance range, as well as a wide temperature range. i-directional flow maximizes productivity. Full flow design reduces pressure drop across the valve. Special o-ring seal ensures a reliable leak-tight connection. TrueSeal connection reduces potential leaks. Specifications: Temperature range: 0 F to 225 F (-18 to 107 ). O-ring seal material: P. SF-51 listed. Pressure rated to 150 PSI with a 600 PSI burst pressure. ctual working pressures with be lower at elevated temperatures dvantages: Reduce costs uilt-in TrueSeal connection eliminates the need for a secondary fitting. Save space ow-profile design allows for easy assembly and access where space is at a premium. ssembly Instructions: 1. Inspect the mating threads for debris or damage. Remove any old fluoropolymer tape or sealant on previously used threads. If threads are damaged, replace with new adapter before proceeding. 2. pply 2 to 3 wraps of fluoropolymer tape, or an SF/F approved silicon sealant. o not use Plumbers Putty or Pipe ope. These chemically react with plastic materials and could cause a failure. 3. lign ball valve to mating thread to ensure cross threading does not occur. 4. Screw ball valve onto mating thread 3 to 5 turns. This should be sufficient to properly seal the threads. 5. Pressurize system and check for leaks. V - Valve ale lbow PRT UR O.. PTF THR Ø HO PP4V2-G (+) 1/4 1/ PP4V4-G 1/4 1/ PP4V6-G 1/4 3/ PP4V8-G (+) 1/4 1/ PP6V2-G (+) 3/8 1/ PP6V4-G 3/8 1/ PP6V6-G 3/8 3/ PP6V8-G 3/8 1/ VF - Valve Female lbow PRT UR O.. PTF THR Ø HO PP4VF2-G (+) 1/4 1/ PP4VF4-G 1/4 1/ PP4VF6-G 1/4 3/ PP6VF2-G (+) 3/8 1/ PP6VF4-G 3/8 1/ PP6VF6-G 3/8 3/ (+) on Standard. Parker Hannifin orporation Fluid System onnectors Otsego, I 26

11 atalog 3501 VU - Valve Union onnector PRT UR 1 2 Ø HO PP4VU4-G 1/4 1/ PP4VU6-G 1/4 3/ PP6VU4-G 3/8 1/ PP6VU6-G 3/8 3/ Tube 2 Tube 1 VF - Valve Female onnector PRT UR O.. PTF THR Ø HO PP4VF2-G 1/4 1/ PP4VF4-G 1/4 1/ PP4VF6-G 1/4 3/ PP6VF2-G 3/8 1/ PP6VF4-G 3/8 1/ PP6VF6-G 3/8 3/ VU - Valve lbow Union PRT UR 1 2 Ø HO Tube O.. PP4VU4-G 1/4 1/ PP4VU6-G 1/4 3/ PP6VU4-G 3/8 1/ PP6VU6-G 3/8 3/ VTU - Valve Tube lbow Union PRT UR O.. Thru Hole ST Ø HO PP4VTU6-G 1/4 3/ PP6VTU6-G 3/8 3/ V - Valve ale onnector PRT UR O.. PTF THR Ø HO PP4V2-G (+) 1/4 1/ PP4V4-G 1/4 1/ PP4V6-G 1/4 3/ PP4V8-G (+) 1/4 1/ PP6V2-G (+) 3/8 1/ PP6V4-G 3/8 1/ PP6V6-G 3/8 3/ PP6V8-G (+) 3/8 1/ Parker Hannifin orporation Fluid System onnectors Otsego, I 27

12 atalog 3501 S - Safety lip (Patent o. 6,065,779) PRT UR PRT UR FOR OI O.. S-4 S-4-1/4 S-5 S-5-5/16 S-6 S-6-3/8 S-8 S-8-1/2 TS - Tube Supports YO PRT UR 4TS3 5TS3 6TS4 8TS6 To be used with soft durometer tubing. PP PRT UR P4TS3 P5TS3 P6TS4 P8TS6 QRT - Quick Release Tool akes disconnection of tube adapters and tubing a breeze. Parker Hannifin orporation Fluid System onnectors Otsego, I 28