Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 22,500 psi (1,500 (1,550 bar)

Transcription

1 Medium Valves, ittings Tubing s to 22,00 psi (,00 (,0 bar) MXIMTOR has been designing manufacturing high pressure equipment for more than thirty years has a worldwide reputation for quality reliability, backed by one of the best service organizations in the industry. Medium Valves feature: u Rising stem design. u 36 L (04) wetted parts for excellent corrosion resistance. u Metal-to-metal seating achieves bubble-tight shut-off, longer stem seat life, greater durability for repeated open close cycles. u PT carbon packing with metal back-up rings offers reliable stem to body sealing. u Non-rotating stem prevents stem to seat galling. u Stem sleeve packing gl materials have been selected to achieve optimum thread cycle life reduced hle torque. ll stem sleeve threads are rolled, assuring smooth operation. u Safety weep holes for all pressure connections packing area. u Six different valve body patterns, with choice of vee or regulating type stem tip. MXIMTOR offers a complete line of medium pressure fittings, tubing, check valves, line filters, anti-vibration fittings safety head assemblies. ll medium pressure valves fittings use the medium pressure style connection. This coned threaded connection features orifice sizes to match the high flow characteristics of the medium pressure valve, fitting tubing line. Medium Index Valves ittings nti-vibration ollet l ssemblies ssemblies...7 Tubing Tubing...8 oned Threaded Nipples oned Threaded Nipples...9 heck Valves heck Valves...0- Line Line...2 Safety Head ssemblies ngle...3 Rupture iscs Safety Head ssemblies Rupture iscs Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. actory MXIMTOR mbh Telephon: +49 (0) actory MXIMTOR Lange Strasse mbh 6 Walkenrieder Nordhausen Str. acsimile: +49 (0) Telephon: -Mail: ++49 info@maximator.de 86 / ermany Zorge / ermany acsimile: Internet: / Internet info@maximator.de ll ll technical dimensional information subject to to change. ll ll general Terms onditions of sale, of including sale, including limitations limitations of our liability, of our liability, apply to apply all products to all products services services sold. sold S 02/203 09/200

2 Medium Valves s to 22,00 psi (,0 (,00 bar) MXIMTOR medium pressure valves with metal to metal seats have a high level of safety reliability under adverse operating conditions. These valves may be used both with gases liquids. Traceability is ensured through extensively documented data (batch number, maximum pressure, material number, type designation). ll medium pressure valves include gls collars. O.. Size onnection Size Rated v* /Temp. Rating R.T. (bar)** / 4 4M 0.2 (3.2) ,00 3 / 8 (9.3) 6M 0.29 (.6) ,00 9 / 6 (4.29) 9M 0.32 (7.9). 22,00 3 / 4 (9.0) 2M (.) ,00 6M ,00 Ordering Information Typical catalog number: 2V4MO7 * v values shown are for 2-way straight pattern vee stem valves. or 2-way angle patterns, increase the v value by 0%. ** See page 2 in the Technical Section for /Temperature Rating hart. 2V 4M 07 OPTIONS Valve Series O.. Tube Size 2V 4M / 4 6M 3 / 8 9M 9 / 6 2M 3 / 4 6M Stem ody Pattern xtreme temperature 07 V stem 08 RULTIN stem (tapered tip for regulating shutoff) 87 V stem with replaceable seat 88 RULTIN stem with replaceable seat two-way straight 2 two-way angle 3 three-way, two on pressure 4 three-way, one on pressure three-way, two-stem manifold option, see below. of turns open low oefficient Reference urves (v) ulating Stem Stem Special esigns for xtreme Temperatures Stard valves are supplied with Teflon/arbon packing may be operated to 40 (2 ). High temperature packing /or extended stuffing box are available for service from -423 to 200 ( to 60 ) by adding the following suffixes to catalog order number. - T stard valve with teflon glass packing to 600 (3 ). - Y stard valve with graphite braided yarn packing to 800 (42 ). - HT extended stuffing box valve with graphite braided yarn packing to 200 (60 ). - stard valve with cryogenic trim materials Teflon packing to -00 (-73 ). - LT extended stuffing box valve with teflon packing cryogenic trim materials to -423 (-22 ). Repair Kits onsult your MXIMTOR representative for repair kits valve bodies. Refer to the Tools Installation section for proper maintenance procedures % of rated v Positive Locking evice 36 SS Valve ody available in six patterns djustable Packing oned Threaded Tubing onnections Valve Shown: 2V9MO7 nodized luminum Hle Low riction Packing l Non-Rotating Stem ( & ulating esigns) nti-xtrusion Seal Rings Metal to Metal Seating 2 ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200

3 Medium Valves s to 22,00 psi (,0 bar) Valve Pattern atalog Stem O.. Tube (mm) imensions H I J K Valve Panel Hole lock Thickness 2-Way Straight I 2V4M07 2V4M08 / (2.7) 4.6 (7) () (4.) (.6) (9.) (3.) 2.9 (7) (.2) () 0.7 (9.) (20.) J H 2V6M07 2V6M08 3 / (.) 4.6 (7) () (4.) (.6) (9.) (3.) 2.9 (7) (.2) () 0.7 (9.) (20.) I 2V9M07 2V9M08 9 / (7.8).87 (49) 2.88 (73.2) 2.38 (60.) (9.) 0.4 (.) 3.94 (00).7 (44.) 2.0 (63.).02 (2.9) 2V2M07 2V2M08 3 / 4 (.) 7.0 (79) 3.74 (9) 0.43 ().76 (44.7) 0.3 (262) 2.2 (7.2).2 2V6M07 2V6M (228) 4.6 (8) 3.7 (9.3) 0.3 (3.).3 (28.7) 2.0 (63.) 0.3 (262) 2.8 (7.4) 4.3 (0) (4.).77 (4) 2-Way ngle 2V4M072 2V4M082 / (2.7).00 (27) 2.43 (6.7) (.2) (.6) (9.) (3.) 2.9 (7) () 0.7 (9.) (20.) J I H 2V6M072 2V6M082 3 / (.).00 (27) 2.43 (6.7) (.2) (.6) (9.) (3.) 2.9 (7) () 0.7 (9.) (20.) 2V9M072 2V9M082 9 / (7.8) 6.36 (6.) 3.38 (8.9).7 (44.) (9.) 0.4 (.) 3.94 (00) (63.).02 (2.9) 2V2M072 2V2M082 3 / 4 (.) 7.6 (92) 4.2 (08) 2.2 (7.2) 0.43 ().76 (44.7) 0.3 (262).0 (38).2 2V6M072 2V6M (240).2 () 2.8 (7.4) 0.3 (3.).3 (28.7) 2.0 (63.) 0.3 (262) 2.07 (2.) 4.3 (0) (4.).77 (4) 3-Way / 2 on 2V4M073 2V4M083 / (2.7).20 (32) 2.62 (66.) (4.) (.6) (9.) (3.) 2.9 (7) () (.2) 0.7 (9.) (20.) J H 2V6M073 2V6M083 3 / (.).20 (32) 2.62 (66.) (4.) (.6) (9.) (3.) 2.9 (7) () (.2) 0.7 (9.) (20.) K 2V9M073 2V9M083 9 / (7.8) 6.60 (67.6) 3.62 (92) 2.38 (60.) (9.) 0.4 (.) 3.94 (00) (63.).7 (44.).02 (2.9) 2V2M073 2V2M083 3 / 4 (.) 7.97 (20) 4.63 (7.) 0.43 ().76 (44.7) 0.3 (262).0 (38) 2.2 (7.2).2 2V6M073 2V6M (29).87 (49) 3.7 (9.3) 0.3 (3.).3 (28.7) 2.0 (63.) 0.3 (262) 2.07 (2.) 4.3 (0) 2.8 (7.4) (4.).77 (4) - Panel mounting screw thread size 0-24 UN (screw included). ll dimensions are for reference only are subject to change. ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200 3

4 I I Medium Valves s to 22,00 psi (,0 bar) Valve Pattern atalog Stem O.. Tube (mm) imensions H I J K Valve lock Panel Thickness Hole 3-Way / on 2V4M074 2V4M084 0, / 4 (2.7) (27) (6.7) (.2) (.6) (9.) (3.) 2.9 (7) () 0.7 (9.) (20.) J H 2V6M074 2V6M / 8 (.) (27) (6.7) (.2) (.6) (9.) (3.) 2.9 (7) () 0.7 (9.) (20.) 2V9M074 2V9M / 6 (7.8) (6) (8.9) (44.) (9.) 0.4 (.) (00) (63.).02 (2.9) 2V2M074 2V2M084 3 / 4 (.) 7.6 (92) (08) (7.2) 0.43 () (44.7) (262).0 (38).2 2V6M074 2V6M (242).20 (32) (7.4) (3.) (28.7) (63.) (262) (2.) (0) (4.).77 (4) 3-Way / 2-Stem Manifold 2V4M07 2V4M08 0, / 4 (2.7) (27) 3.39 (86).69 (43) (.6) (9.) (3.) 2.9 (7) () 0.7 (.2) (9.) (20.) J K K H 2V6M07 2V6M08 2V9M07 2V9M08 3 / (.) (27) (86) 9 / (7.8) (282) ().69 (43) 2.6 (6) (.6) (9.) (9.) (3.) (7) () (.2) (9.) (20.) (.) (00) (63.) (44.) (2.9) 2V2M07 2V2M08 3 / 4 (.) 3.07 (332) (82.) 0.43 () (44.7) (262).0 (38) (7.2) 2V6M07 2V6M (4) (9) (9.) (3.) (28.7) (63.) (262) (2.) (0) (7.4) (4.).77 (4) 2-Way ngle / Replaceable Seat 2V4M872 2V4M882 0, / 4 (2.7) (23) (7.2) (.2) (.6) (9.) (3.) 2.9 (7) () 0.7 (9.) (20.) J I H 2V6M872 2V6M882 2V9M872 2V9M / 8 (.) (23) (7.2) (.2) / 6 (7.8) (69) (8.) (44.) (.6) (9.) (9.) (3.) 2.9 (7) () (.) (00) (63.) 0.7 (9.) (20.).02 (2.9) 2V2M872 2V2M882 3 / 4 (.) 7.6 (92) (08) (7.2) 0.43 () (44.7) (262).0 (38).2 2V6M872 2V6M (243) (33.3) (7.4) (3.) (28.7) (63.) (262) (2.) (0) (4.).77 (4) - Panel mounting screw thread size 0-24 UN (screw included). ll dimensions are for reference only are subject to change. 4 ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200

5 Medium ittings s to psi (,00 bar) 22,00 psi (,0 bar) MXIMTOR medium pressure fittings are designed with the large orifice for use with the 2V series medium pressure valves medium pressure tubing. ll medium pressure fi ttings have coned threaded type connections. Mounting holes are stard on all elbows, tees, crosses. Tubing Size l ollar Plug Tubing ap / 4 24M 24M 2P4M 2T4M 3 / 8 (9.3) 26M 26M 2P6M 2T6M 9 / 6 (4.29) 29M 29M 2P9M 2T9M 3 / 4 (9.0) 22M 22M 2P2M 2T2M 26M 26M 2P6M 2T6M onnection omponents ll medium pressure fittings are supplied with gls collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed. lbow itting Pattern atalog onnection O.. Tube Size (mm) L4M 4M / 4 (2.7) (9.).0 (28) imensions.4 (39.) 0.7 (9.) 0.49 (2.) 0.49 (2.) (.6) lock Thickness L6M 6M 3 / 8 (.) (0.8) 0.26 (6.6) (20.) L9M 9M 9 / 6 (7.8).7 (44.) 2.0 (63.) (2.3) 0.84 (2.3) 0.33 (8.4).02 (2.9) 2L2M 2M 3.0 / 4 (.) (38.) 2.2 (7.2).0 (38.) 0.3 (8.9) 2L6M 6M (2.3) 4.3 (0) 2.06 (2.3) 0.3 (3.).77 (4) Tee T4M 4M / 4 (2.7) (9.).0 (28).4 (39.) 0.7 (9.) 0.49 (2.) 0.49 (2.) (.6) T6M 6M 3/ 8 (.) (0.8) 0.26 (6.6) (20.) 2T9M 9M / 6 (7.8).7 (44.) 2.0 (63.) (2.3) 0.84 (2.3) 0.33 (8.4).02 (2.9) 2T2M 2M 3.0 / 4 (.) (38.) 2.2 (7.2).0 (38.) 0.3 (8.9) 2T6M 6M (2.3) 4.3 (0) 2.06 (2.3) 0.3 (3.).77 (4) ll dimensions are for reference only are subject to change. See page 2 in the Technical Section for pressure/temperature rating chart. ll technical dimensional information subject to change. ll general Terms onditions /203 S 09/200

6 Medium ittings s to 22,00 psi (,0 (,00 bar) itting Pattern atalog onnection O.. Tube Size (mm) imensions lock Thickness ross X4M 4M / 4 (2.7) (9.).4 (39.).4 (39.) 0.77 (9.) 0.49 (2.) 0.98 (2) (.6) X6M 6M 3 / 8 (.) (0.8) (0.8).26 (32) 0.26 (6.6) (20.) X9M 9M 9 / 6 (7.8) 2.0 (63.) 2.0 (63.) (2.3).67 (42.6) 0.33 (8.4).02 (2.9).0 2X2M 2M 3 / 4 (.) (38.).0 (38.) (0.8) 0.3 (8.9) 2X6M 6M (2.3) 4.3 (0) 4.3 (0) 2.06 (2.3) 2.76 (70) 0.3 (3.).77 (4) Straight oupling / Union oupling Straight oupling 24M M / 4 2U4M (2.7) (4.) 26M M 3 / 8 2U6M (.) (44.) 0.69 (7.) Straight oupling Union oupling Straight oupling Union oupling 29M 2U9M M 9 / 6 (7.8) (3.8) Straight oupling Union oupling 22M 2U2M 2.0 2M 3 / 4 (.) (63.) (36.) Straight oupling Union oupling Union oupling 26M 2U6M 6M (88.9) (0.8) Straight oupling Union oupling ulkhead oupling M 4M / 4 (2.7) (47.8) 0.8 (20.6) 0.67 (7) M 6M 3/ 8 (.) () 0.94 (23.9) 0.39 (9.9) M 9M 9 / 6 (7.8) (60.) (36.) (36.).2 (28.) 0.39 (9.9) M 2M 3 / 4 (.) (7.4) (4.3) (4.3).37 (34.8) 0.47 (.9) 26M 6M (89.9) (0.8) (0.8).68 (42.6) 0. (3) ll dimensions are for reference only are subject to change. See page 2 in the Technical Section for pressure/temperature rating chart. 6 ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200

7 nti-vibration ollet l ssembly s to 22,00 psi (,00 (,0 bar) MXIMTOR anti-vibration collet gl assemblies are for use in applications where there could be extreme external mechanical vibrations or shock in tubing lines. These collet gl assemblies are interchangeable with the stard medium pressure coned threaded tube connections. In a normal coned threaded tube connection, any external mechanical loading on the tubing lines, valves or fittings would be concentrated on the first thread of the tube. This can cause failure of the tube at this thinner cross-section. The anti-vibration collet gl assembly grips the tube behind the connection, supporting the tube at the full cross-section straight area, moving the loading away from the threaded area. The back part of the assembly has a gl nut that, when tightened properly, compresses a split collet on the tube, providing the beneficial gripping action. ll anti-vibration collet gl assemblies come with a Molybdenum isulfide oating to guard against galling of the stainless components. l Pattern atalog Part O.. Tubing Size imensions (Hex.) (Hex.) 2V4M omplete ssembly 2V4M 2V4M ollet ody Slotted ollet /4.27 (32.2) 0.0 (2,7) 0.62 (.7) 2V4M l Nut 2V6M omplete ssembly 2V6M 2V6M ollet ody Slotted ollet 3/8.4 (39.) 0.62 (.7) 0.8 (20.6) 2V6M l Nut 2V9M omplete ssembly 2V9M 2V9M ollet ody Slotted ollet 9/6.82 (46.2) 0.94 (23.9) 0.94 (23.9) 2V9M l Nut 2V2M omplete ssembly 2V2M 2V2M ollet ody Slotted ollet 3/4 () (.2).2 2V2M l Nut 2V6M omplete ssembly 2V6M 2V6M ollet ody Slotted ollet 2.44 (62).0 (38.) 2V6M l Nut ll dimensions are for reference only subject to change. ll technical dimensional information subject to change. ll general Terms onditions /203 S 09/200 7

8 Medium Tubing s to 22,00 psi (,00 (,0 bar) MXIMTOR offers a line of cold drawn thick wall tubing, with flow areas to compliment the large orifice medium pressure valves fittings. This tubing is made under strict manufacturing quality control stards inspections, with dimensional tolerances to match the requirements of the medium pressure coned threaded connections. The stard materials are 4 36 stainless s. Other materials may be provided on special request, depending on the specific material, diameters lengths. Normal Tubing Size Tubing Tolerances Tolerance O.. / / (6.299 / 6.72) 3 / 8 (9.3) 0 / 0.36 (9.398 / 9.27) 9 / 6 (4.29) 0.7 / 0.2 (4.47 / 4.02) 3 / 4 (9.0) 0.74 / (8.923 / 8.796) 0.99 / (2.273 / 2.74) atalog Tube Material its onnection Tube Size O.. I to 00 (-98 to 37 ) 200 (93 ) Working 400 (204 ) 600 (3 ) 800 (426 ) 2TU4M-36 2TU4M-4 36SS 4SS 4M / (2.77) 22,00 8,900 (,0) 7,4 (,200),960 (,00),20 (,040) 2TU6M-36 2TU6M-4 36SS 4SS 6M 3 / (.7) 22,00 8,900 (,0) 7,4 (,200),960 (,00),20 (,040) 2TU9M-36 2TU9M-4 36SS 4SS 9M 9 / (7.93) 22,00 8,900 (,0) 7,4 (,200),960 (,00),20 (,040) TU9M-36 TU9M-4 36SS 4SS 9M 9 / (9.2),200 (,00) 3,680 (940) 2,66 (870),2 (790) 0,944 (70) 2TU2M-36 TU2M-36 36SS 36SS 2M 3/ 4 (.3) 0.6 (3.) 22,00,200 (,00) 8,900 (,0) 3,680 (940) 7,4 (,200) 2,66 (870),960 (,00),2 (790),20 (,040) 0,944 (70) 2TU6M-36 TU6M-36 36SS 36SS 6M 0.62 (4.27) (7.48) 22,00,200 (,00) 8,900 (,0) 3,680 (940) 7,4 (,200) 2,66 (870),960 (,00),2 (790),20 (,040) 0,944 (70) ll dimensions are for reference only subject to change. 8 ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200

9 oned Threaded Nipples s to 22,00 psi (,00 (,0 bar) MXIMTOR offers a line of coned threaded medium pressure tube nipples in a variety of lengths for all stard tube sizes. The coned threaded medium pressure tube nipples are available in 36 stainless. They are also available in the,200 psi (,00 bar) or 22,00 psi (,0 (,00 bar) versions for the 9/6, 3/4 O tube sizes. See chart below for ordering information. Special length coned threaded nipples are available upon request. onsult MXIMTOR for availability price. 2.7 (69.8) Length 3 (76.2) Length atalog s are 36 Stainless Steel material 4 (0.6) Length 6 (2.4) Length 8 (203.2) Length 0 (24) Length 2 (4.8) Length its onnection Tube Size O.. I.. Working at N4M N4M N4M N4M N4M N4M N4M M / 4 (2.77) 22, N6M N6M N6M N6M N6M N6M M 3 / 8 (.7) 22, N9M N9M N9M N9M N9M M 9/ 6 (7.93) 22, N9M-4-36 N9M-6-36 N9M-8-36 N9M-0-36 N9M M 9 / 6 (9.2),200 (,00) 2N2M N2M N2M N2M M 3 / 4 (.3) 22, N2M-6-36 N2M-8-36 N2M-0-36 N2M M 3 / 4 (3.),200 (,00) 2N6M N6M N6M N6M M 0.62 (4.27) 22,00 N6M-6-36 N6M-8-36 N6M-0-36 N6M M (7.48),200 (,00) Stard nipples are not supplied with gls collars, see ittings on page 4 for these components. See adjacent Tubing page 6, for pressure/temperature rating chart. ll dimensions are for reference only subject to change. ll technical dimensional information subject to change. ll general Terms onditions /203 S 09/200 9

10 heck Valves s to 22,00 psi (,0 (,00 bar) O-Ring heck Valves O-Ring heck Valves MXIMTOR o-ring check valves provide high quality directional flow control tight shutoff for liquids gases. ll check valves are supplied with gls collars. These check valves are not to be used as a relief device. The opening pressure of the O-Ring heck Valves is approx. 0 psi (. bar). ody, cover, poppet, cover gl: 36 stainless Spring: 0 series stainless O-ring: Viton [-4 to 392 (-20 to 200 )] Valve Pattern atalog onnection Rating Rated (v) imensions (Hex.) O-Ring heck Valves 2O4M 4M 22, (2.7) (73.9) 2O6M 6M 22, (.) (84.) 2O9M 9M 22, (7.8) 2. (36.) 4.29 (09) 2O2M 2M 22,00 (.) 4.70 (0.8).46 (38.7) 2O6M 6M 22, (0.8) 6.7 (66.9) UTION: RQUNT INSPTIONS of O-Rings are necessary to ensure proper service of the check valve. O-Rings have shown satisfactory service life in testing, however different service conditions may lead to variations in cycle shelf life. ll dimensions are for reference only subject to change. 0 ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200

11 heck Valves s to 22,00 psi (,00 (,0 bar) all heck Valves all heck Valves MXIMTOR ball check valves prevent reverse flow where bubble tight shutoff is not matory. These check valves are designed with a ball cradled floating poppet to assure positive inline seating. This poppet design allows full flow around the ball to minimize pressure drop. heck valves are rated to 660 ( ). ll check valves are supplied with gls collars. These check valves are not to be used as a relief device. The opening pressure of the all heck Valves is approx. 0 psi (. bar). ody, cover, poppet, cover gl: 36L series stainless all spring: 0 series stainless Valve Pattern atalog onnection Rating Rated (v) imensions (Hex.) all heck Valves 24M 4M 22, (2.7) (73.9) 26M 6M 22, (.) (84.) 29M 9M 22, (7.8) 2. (36.) 4.29 (09) 22M 2M 22,00 (.) 4.70 (0.8).46 (38.7) 26M 6M 22, (0.8) 6.7 (66.9) ll dimensions are for reference only subject to change. ll technical dimensional information subject to change. ll general Terms onditions /203 S 09/200

12 Line s to 22,00 psi (,0 (,00 bar) ual-isc Line MXIMTOR dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withst pressure surges without cracking, flaking, or rupturing. ilter elements come stard in the following micron sizes: /8, 8/, /6 (secondary/primary). are rated for temperatures to 660 (-22 (-0 to ). ll line filters come with gls collars. ody, cover, cover gl: 36L series stainless lement: 36 stainless up- Line MXIMTOR cup-type line filters are used when maximum filtration surface area a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, will permit higher flow rates with a lower pressure drop, longer intervals between element changes. ilter elements come stard in,, or 6 micron sizes are easily replaced. are rated for temperatures to 660 (-22 (-0 to ). ll line filters come with gls collars. ody, cover, cover gl: 36L series stainless lement: 36 stainless ual-isc Line up- Line atalog Rating Micron Size onnection ilter lement rea 2 (mm) 2 imensions (Hex.) ual-isc Line 29M - /8 /8 22, M - 8/ 8/ (6.) 29M - /6 /6 9M 0.2 (60) 2.68 (68.) 4.96 (26) (36.) up- Line 24M- 22, M- (2.7) 24M M- 22, M- (.) 26M M- 22, M- (7.8) 29M M- 22,00 22M- (,0) (.) 22M M- 22, M- 26M-6 6 It is recommended that all fluids entering a high pressure system be thoroughly cleaned. Maximator filters are designed to remove small amounts of process particles. differential should not exceed 000 psi across the filter elements. 4M 6M 9M 2M 6M 0.82 () 2.38 (60.) 2.87 (72.9) () (7.8) (8.) (,000) (92.2) (0) (36.) (3,960) (46) (66.9) (0.8) (3,960) (46) (66.9) (0.8) ll dimensions for reference only are subject to change. 2 ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200

13 ual-isc Line MXIMTOR dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withst pressure surges without cracking, flaking, or rupturing. ilter elements come stard in the following micron sizes: /8, 8/, /6 bar) are rated for s to(secondary/primary). psi (,00 temperatures -60 to 660 (-0 to ). ll line filters come with gls collars. /4"Line ngular Rupture iscs ual-isc Line ngle Safety Head ssembly s to psi (,0 s to 22,00 psi (,00 bar) bar) MXIMTOR safety head assemblies are used to provide nglecover, ual-isc Line Safety Head Line ssembly ual-isc ody, cover gl: 36L series stainless over-pressure protection to high pressure systems. These lement: 36 stainless MXIMTOR dual-disc linetofiare lters are with used to fiappropriltergases process MXIMTOR angle filters used to the filter or safety head assemblies are be used fl uids in high pressure systems. This design helps remove liquids in high pressure systems. The filter elements ate /4 angular rupture disc listed in the chart below. up- Linechanged the large particles first through a coarse primary disc, which can be easily in-situ. The special design alup- Line then allows a secondary disc filter to provide a smaller micron lows the exchange of the element without the MXIMTOR cup-type line filters are used when maximum filtration. These filter elements are in designed withst need to first disassemble the filter front oftothe tubing. filtration surface area a single micron size element is pressure surgesarewithout cracking, flaking, with or rupturing. ilter elements made of sintered material pore sizes preferred. This design increases the filter area as much as 6 ilter elements come stard in the following micron sizes: of µm, µm or 6 µm. are rated for temperatures times the area will permit higher of the disc type fi lter, atalog atalog atalog /8, /6 (secondary/primary). arecome ratedwith for /, to 660 (-22 ). ll angle filters (bar)topressure flow rates with apsilower drop, longer intervals temperatures -60 to 660 (-0 to ). ll line filters gls collars. between element changes. ilter elements come stard in,33 -,8,640-2, ,060 come with gls collars. R-00 are R-2000 R-000,, or 6 micron sizes are easily replaced. ( ) ( ) ( ) Material: rated for temperatures -60 to 660 (-0 to ). ll,820-6,360 2,60-3,780 ody, cover, cover gl: series stainless,64 -,27236L ody, cover, cover gl: 36L series stainless line filters come with gls collars. R-6000 R-00 R-200 lement: 36 stainless ( ) ( ) ( ) lement: 36 stainless 6, - 6,890 3,80-4,840,4 -,90 R-600 R-4000 ody, cover, cover gl: 36L series stainless R-00 ( ) ( ) ( ) up- lement: 36Line stainless up- Line 6,790-7,420 imensions 4,0 -,900,697 -,8 Safety Head ssembly ody Torque R-7000 R-000 R-70 MXIMTOR cup-type line fiits lters are used when maximum Rating atalog ft lbs. ( ) (,003.4,096.6) (7-27.9) atalog onnection Micron ilter imensions (mm) lock onnection micronpsisize (bar)element is filtration surface area a single without isc (Hex.) (Hex.) (L.) (I..) (I..) Rating Typ Sizelement 7,27 -(Nm) thickness imensions ilter lement 7,90,20 6,960,940-2,20 6Size onnection H I preferred. This design increases the fi lter area as much as atalog Micron (mm) Rating R-700 reas ² R-6000 R-2000 rea 2 (mm) 2 (Hex.) ( ) (, (Hex),69.7)(Hex) times the area ( ) of the disc type filter, will permit (mm²) higher 22, ,760-8,480 6,490-8,020 flow rates with2,42 a lower pressure - 2,60 2SH4M 4M drop, longer intervals R-8000 R-200 (,0) (,00) () R-7000 (63) (2.8) ual-isc Line between element changes. ilter elements come stard in ) ngle ilter (3.2 (,37.2 -,242.8) ( ) 29M /8 /8, 24M-, or 6 micron are easily replaced. 8,24 are - 9, ,460-9, ,90 sizes - 3,80 22, M R M - 8/ 8/ R-800 R-00 rated for temperatures -60 to 660 (-0 to ). ll 22, SH6M 6M (,00) (60) (68.) (26) (36.) ( ) (,204. -,3.9) ( ) 24M- 4M (,00) 29M - /6 /6 (,0) (9) (69.) (,0) (2.7) collars. () (79) (40) () () (42) (0) (8.) (.)(2.7) (26) line filters come with gls 8,7-9,40 8,4-20,40 3,39-3,70 24M-6 6 R-9000 R-9000 R-0 up- Line ( ) (,27 -,389) ( ) ,00 26M- ody, cover, cover gl: 36L series stainless 2SH9M 9M 24M- 22, , (63.7) ,2 9,400-2, ,880 4,240 (,0) (,00) (7) M- 6M lement: 36 (,0) stainless (.) R-900 R M- 4M (42) R () (63. (79) ) () () (0) (9) (,337.9 (8.) -,462.) (.9) (26) ( ) (,00) () (60.) (72.9) 26M M ,00 9,700 20,370-22,260 4,36-4,770 26M- - 0,600 2SH2M 2M R M- R-2000 R (,0) (,00) (20) (.2) (69.) imensions (669 73) (,404.8,3.2) (-329). Micron ilter lement 26M- Size 2.64onnection 6M 22, atalog M- 9M (,00) () (8.) (mm) (8.)(7.8) (,0) (7.8) Rating (,000) 0,670 (92) -,660 (67) (4) (46) rea (3) () (39) (Hex.) 26M-6 6 2,340-(.2) 23,320 (23.8) 4,80 -,0 R-000 R R M ,00 29M- ( ) (,47.7 -,608.3) 2SH6M( ) 6M (,0) (69.) 29M- (200) 9M (36.6) 22M- (,00) ual-isc Line (,00) (,000) (92.2) (0) (36.) 29M , M - /8 /8 22M- 2M ll(2) dimensions(8.) for reference only are subject to change. 2.68(0.8) 4.96 (,0) (.) (3,960) (4) (90) (7.2) (62) (0) 0.2 (.2) (60) 22M- 9M 29M - 8/ 8/ M-6 6 (,00) (60) (68.) (26) (36.) 22M- 2M 29M - /6 /6 (3,960) (46) (66.9) (0.8) 22M M- 22, M- up- Line 26M- 6M (,0) (3,960) (4) (90) (7.2) (0) (2) (8.) (0.8) (34.9) (60) 6M (62) 26M- 24M- (3,960) (46) (66.9) (0.8) (,00) 26M M M- 4M (,00) () It is recommended that all fluids entering a high pressure system be thoroughly cleaned. ll dimensions for(60.) reference only (72.9) are subject to change. 24M-6 6 Maximator filters are designed to remove small amounts of process particles. differential should not exceed 000 psi across the filter elements. 26M M- 6M (,00) () (7.8) (8.) technical dimensional packed information subject to change. general Terms onditions 26M-6 6are Rupturelliscs individually marked typell plate. of sale, including limitations of our liability, apply to all products services sold. 29M M- S 09/200 9M (,00) (,000) (92.2) (0) (36.) 29M M M- 2M (3,960) (46) (66.9) (0.8) 22M M M 26M- (3,960) (46) (66.9) (0.8) (,00) 26M-6 6 It is recommended that all fluids entering a high pressure system be thoroughly cleaned. Maximator filters are designed to remove small amounts of process particles. differential should not exceed 000 psi across the filter elements. ll dimensions for reference only are subject to change. ll technical dimensional information subject to change. ll general Terms onditions ll technical dimensional information general onditions ll technical dimensional information subject to subject change.to llchange. generalll Terms Terms onditions of sale, including limitations of our liability, apply to all products sold. limitations ofservices sale,limitations including of our liability, to all products services sold. of sale, including of our liability, apply to allapply products services sold /203 S 09/ S 09/ S 09/200 3

14 Safety /4" ngular Head ssembly Rupture iscs s to 22,00 psi (,0 bar) MXIMTOR safety head assemblies are used to provide over-pressure protection to high pressure systems. These safety head assemblies are to be used with the appropriate / 4 angular rupture disc listed in the chart below. Safety Head ssembly ody Hold-down ring Hold-down nut atalog atalog atalog R-000 R ,060 ( ),64 -,272 ( ) R-00 R-6000,33 -,8 ( ) Rupture disc,820-6,360 (not included) ( ) R-2000 R-00 3/8 NPT,640-2,720 emale (802.8 connection ) 2,60-3,780 ( ) R-00,4 -,90 ( ) R-600 6, - 6,890 ( ) R ,80-4,840 ( ) Safety R-70 Head ssembly atalog without isc R-2000 R-200 2SH4M,697 -,8 (7-27.9) its onnection,940-2,20 ( ) 2,42-4M 2,60 ( ) Rating R-7000 R ,00 R ,790-7,420 ody Torque ft - lbs. ( ) (Nm) 7,27-7,90(Hex.) ( ) 207,760-8,480 () ( ) imensions 4,0 -,900 R-000 (, ,096.6) (Hex.) (L.),20 (I..)- 6,960(I..) R-6000 (, ,69.7) , , R-7000(63) (,37.2 (2.8)-,242.8) R-00 2SH6M R-0 2SH9M R ,90-3,80 ( ) 6M 3,39-3,70 ( ) 3,880-9M 4,240 ( ) 22,00 R-800 R ,00 R-900 8,24-9,00 ( ) (40) 8,7-9,40 ( ) (7) 9,2-0,070 ( ) R (69.) R R (63.7) 7,460-9, (,204. -,3.9) (.) 8,4-20,40 (,27 -,389) ,400 (6.)- 2,200 (, ,462.) R-400 2SH2M R-000 2SH6M 4,36-4,770 2M (-329) 4,80 -,0 ( ) 6M 22,00 R-0000 R ,00 909,700-0,600 (20) (669-73) (.2) 0,670 -,660 0 ( ) (200) (36.6) 2.72 R-2000 (69.) R (69.) 20, , (,404.8 (6.)-,3.2) 2,340-23,320 (, ,608.3) 0.20 (6.) ll dimensions for reference only are subject to change. Rupture disc flat design up to 8,700 psi (600 bar) Rupture iscs are individually packed marked type plate. Rupture disc hat-shaped design 8,700 psi (600 bar) 4 ll technical dimensional information subject to change. ll general Terms onditions S 02/203 09/200

15 /4" Safety ngular Head Rupture ssembly iscs s to 22,00 psi (,0 (,00 bar) MXIMTOR safety head assemblies are used to /4 provide angular seat rupture discs are Safety designed Head to be ssembly used with the safety over-pressure protection to high pressure systems. head These assemblies that are shown above. Minimum rupture disc pressure safety head assemblies are to be used with the ratings appropriate / 4 angular rupture disc listed in the chart below. stard material is stainless. The pressure ranges indicated in should be at least 0% of system operating pressure. The the table below are at room temperature (72 ).Other materials pressure ranges are available upon request. atalog atalog atalog R ,060 ( ) R-00,33 -,8 ( ) R-2000,640-2,720 ( ) R-200,64 -,272 ( ) R-6000,820-6,360 ( ) R-00 2,60-3,780 ( ) R-00,4 -,90 ( ) R-600 6, - 6,890 ( ) R ,80-4,840 ( ),697 -,8 Safety R-70 Head ssembly atalog (7-27.9) its without isc onnection,940-2,20 R-2000 ( ) 2SH4M 2,42-2,60 R-200 4M ( ) R-7000 Rating R ,00 R ,790-7,420 ody Torque ft ( lbs. -.7) (Nm) 7,27-7,90 ( ) 7, ,480 (3.2 () ) (Hex.) imensions 4,0 (mm) -,900 R-000 (, ,096.6) (Hex.) (L.),20 (I..) - 6,960 (I..) R-6000 (, ,69.7) , , R-7000 (63) (,37.2 (2.8) -,242.8) R-00 2SH6M R-0 2SH9M R ,90-3,80 ( ) 6M 3,39-3,70 ( ) 3,880-4,240 9M ( ) 22,00 R-800 R ,00 R-900 8,24-9,00 ( ) (40) 8,7-9,40 ( ) 9,2 (7) - 0,070 ( ) R-8000 R-9000 R ,460-9, (,204. -,3.9) (69.) (.) 8,4-20,40 (,27 -,389) 2. (63.7) 9,400-2,200 (, ,462.) R-400 2SH2M 4,36-4,770 2M (-329) 22,00 R , ,600 (20) (669-73) (.2) R ,370-22,260 (69.)(, ,3.2) 0.20 R-000 2SH6M 4,80 -,0 ( ) 6M R ,00 0,670 -,660 ( ) (200) (36.6) R ,340-23, (,47.7 -,608.3) (69.) 0.20 ll dimensions for reference only are subject to change. Rupture iscs are individually packed marked type plate. ll technical dimensional information subject to change. ll general Terms onditions /203 S 09/2007 3