Needle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure

Transcription

1 eedle Valves Low Pressure 10V & SW Series Pressures to 15,000 psi (103 bar) Since 195 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned utoclave a reputation for reliable efficient product performance. utoclave ngineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical, research, and oil and gas industries. Low Pressure Valve eatures: 10V Series valve design provides in-line tube connections for 1/ to 1/2 tube sizes. SW Series valve design provides increased flow capabilities. Tubing sizes from 1/8 to 1/2. Rising stem/barstock body design. on-rotating stem prevents stem/seat galling. etal-to-metal seating achieves bubble-tight shutoff, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance. PT (Teflon) encapsulated packing provides dependable stem and body sealing. Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque. hoice of Vee or Regulating stem tips. vailable in five body patterns. utoclave valves are complemented by a complete line of low pressure fittings, tubing, check valves and line filters. The 10V and SW series use utoclave s Speedite connection. This single-ferrule compression sleeve connection delivers fast, easy make-up and reliable bubble-tight performance in liquid or gas service. ll general terms and conditions of sale, including limitations of our liability, apply all products and services sold. 1 eedle Valves - 10V & SW Series

2 umber of turns open Valve Series - 10V Series Pressures to 15,000 psi (103 bar) Tube Pressure Rating iameter Orifice psi (bar) Size onnection Size Room Inches Type Inches (mm) v * Temperature** 1/8 W (2.39) ,000 (103) 1/ W (3.18) ,000 (103) 3/8 W (3.18) ,000 (103) 1/2 SW (6.35) ,000 (690) otes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. (ased on water) ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. eneralized low oefficient urves ( v ) 7 6 LOW RITIO LUIU ROZ PKI L POWR OT STILSS STL L 5 OL WORK TYP 316 SS OY I IV PTTRS O-ROTTI ST LOKI VI 3 Regulating Stem TI-XTRUSIO K-UP RIS JUSTL PKI LOW TRS 2 1 Vee Stem 0 OI O V OR RULTI ST TIP TL-TO-TL STI SPIT "W" OTIOS (XPT 1/2" SPIT SW) % of rated v To ensure proper fit use utoclave tubing Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see eedle Valve Options section or contact your Sales Representative. 10V Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: 10V071 10V Valve Series iameter Tube Size 2-1/8-1/ 6-3/8 8-1/2 ote: ontact Sales for 1/16 tube size or see V Series. 07 Stem/Seat Type 07 - non-rotating Vee stem (on-off service) 08 - non-rotating regulating stem (tapered tip for regulating and shutoff) 87 - Vee stem with replaceable seat 88 - Regulating stem with replaceable seat 1 ody Pattern 1 - two-way straight 2 - two-way angle 3 - three-way, two on pressure - three-way, one on pressure 5 - three-way, two stem manifold valve XX Options or extreme temperature and other options, see Valve Options. 2 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

3 Valve Options xtreme Temperatures Standard utoclave valves with Teflon packing may be operated to 50 (232 ). igh temperature packing and/or extended stuffing box is available for service from 0 (-17.8 ) to 650 (33 ) by adding the following suffixes to catalog order number. T standard valve with Teflon glass packing to 600 (316 ). Y standard valve with graphite braided yarn packing to 650 (33 ). utoclave ngineers does not recommend compression sleeve connections below 0 (-17.8 ) or above 650 (33 ). or additional valve options, contact your Sales Representative. Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: R10V071) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found on the valve drawing or contact your Sales Representative for information. onsult your utoclave representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. imensions - inches (mm) lock atalog Stem iameter Orifice Thick- umber Type Tube iameter 1 * ness Valve Pattern 2-Way Straight 10V2071 V 10V2081 R 10V071 V 10V081 R 10V6071 V 10V6081 R 10V8071 V 10V8081 R 2-Way ngle 10V2072 V 1/ V2082 R (3.18) (2.39) (38.1) (19.05) (7.87) (20.57) (39.62) (76.20) (15.75) (.32) (100.08) (12.70) (7.87) (15.75) 10V072 V 1/ V082 R (6.35) (3.18) (50.80) (25.0) (1.2) (30.23) (55.63) (76.20) (2.6) (5.59) (122.17) (17.53) (7.87) (25.0) 10V6072 V 3/ V6082 R (9.53) (3.18) (50.80) (25.0) (15.7) (30.23) (55.63) (76.20) (2.6) (5.59) (122.17) (17.53) (7.87) (25.0) 10V8072 V 1/ V8082 R (12.70) (6.35) (63.50) (31.75) (13.5) (31.75) (63.50) (76.20) (2.6) (5.59) (128.52) (17.53) (9.65) (25.0) 3-Way / 2 on Pressure 1/8** (3.18) (2.39) (38.10) (19.05) (7.87) (26.92) (20.57) (35.05) (76.20) (15.75) (.32) (95.25) (1.22) (7.87) (15.75) 1/ (6.35) (3.18) (50.80) (25.0) (1.22) (30.23) (2.93) (76.20) (2.6) (5.59) (112.78) (17.53) (9.65) (25.0) 3/ (9.53) (3.18) (50.80) (25.0) (15.75) (30.23) (2.93) (76.20) (2.6) (5.59) (109.7) (17.53) (9.65) (25.0) 1/ (12.70) (6.35) (63.50) (31.75) (13.6) (31.75) (5.97) (76.20) (2.6) (5.59) (112.78) (17.53) (9.65) (25.0) 10V2073 V 1/8** V2083 R (3.18) (2.39) (38.10) (19.05) (7.87) (26.92) (2.93) (76.20) (15.75) (.32) (103.12) (12.70) (7.87) (15.75) 10V073 V 1/ V083 R (6.35) (3.18) (50.80) (25.0) (1.22) (30.23) (55.63) (76.20) (2.6) (5.59) (122.17) (17.53) (9.65) (25.0) 10V6073 V 3/ V6083 R (9.53) (3.18) (50.80) (25.0) (15.75) (30.23) (55.63) (76.20) (2.6) (5.59) (122.17) (17.53) (9.65) (25.0) 10V8073 V 1/ V8083 R (12.70) (6.35) (63.50) (31.75) (13.6) (30.23) (61.98) (76.20) (2.6) (5.59) (128.52) (17.53) (9.65) (25.0) igure 1 igure 2 igure 3 - Packing gland mounting hole drill size * imension is with stem in closed position. or prompt service, utoclave stocks - racket mounting hole size ** 1/8 straight and 3-Way/2 on pressure valves have offset select products. onsult factory. Panel mounting drill size: 0.22 all valves. tube connections. ll dimensions for reference only and subject to change. igure 1 igure 2 igure Way Straight 2-Way ngle 3-Way / 2 on Pressure ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3

4 imensions - inches (mm) lock atalog Stem iameter Orifice Thick- umber Type Tube iameter 1 * ness 3-Way / 1 on Pressure 10V207 V 1/ V208 R (3.18) (2.39) (38.1) (19.05) (7.87) (20.57) (39.62) (76.20) (15.75) (.32) (100.08) (12.70) (7.87) (15.7) 10V07 V 1/ V08 R (6.35) (3.18) (50.8) (25.0) (1.22) (30.23) (55.63) (76.20) (2.6) (5.59) (122.17) (17.53) (9.65) (25.0) 10V607 V 3/ V608 R (9.53) (3.18) (50.8) (25.0) (15.75) (30.23) (55.63) (76.20) (2.6) (5.59) (122.17) (17.53) (9.65) (25.0) 10V807 V 1/ V808 R (12.70) (6.35) (63.5) (31.75) (13.6) (30.23) (61.98) (76.20) (2.6) (5.59) (128.52) (17.53) (9.65) (25.0) 2-Way ngle / Replaceable Seat 10V2872 V 1/ V2882 R (3.18) (2.39) (38.10) (19.05) (7.87) (20.57) (32.51) (39.62) (76.20) (15.75) (.32) (11.30) (12.70) (7.87) (15.75) 10V872 V 1/ V882 R (6.35) (3.18) (50.80) (25.0) (1.22) (28.5) (5.10) (57.15) (76.20) (2.6) (5.59) (152.0) (17.53) (9.65) (25.0) 10V6872 V 3/ V6882 R (9.53) (3.18) (50.80) (25.0) (15.75) (28.5) (57.91) (57.15) (76.20) (2.6) (5.59) (152.0) (17.53) (9.65) (25.0) 10V8872 V 1/ V8882 R (12.70) (6.35) (63.50) (31.75) (13.6) (25.5) (63.50) (60.5) (76.20) (2.6) (7.11) (153.92) (17.53) (9.65) (25.0) 3-Way / 2-Stem anifold 10V2075 V 10V2085 R 10V075 V 10V085 R 10V6075 V 10V6085 R 10V8075 V 10V8085 R 1/ (3.18) (2.39) (38.10) (19.05) (7.87) (28.5) (20.57) (57.15) (76.20) (15.75) (.32) (117.60) (12.70) (7.87) (15.7) 1/ (6.35) (3.18) (50.80) (25.0) (1.22) (2.93) (27.69) (85.85) (76.20) (2.6) (5.59) (17.83) (17.53) (9.65) (25.0) 3/ (9.53) (3.18) (50.80) (25.0) (15.75) (2.93) (27.69) (85.85) (76.20) (2.6) (5.59) (17.83) (17.53) (9.65) (25.0) 1/ (12.70) (6.35) (63.50) (31.75) (13.6) (2.93) (26.16) (85.85) (76.20) (2.6) (5.59) (17.83) (17.53) (9.65) (25.0) Valve Pattern igure igure 5 igure 6 - Packing gland mounting hole drill size * imension is with stem in closed position. or prompt service, utoclave - racket mounting hole size ll dimensions for reference only and subject to change. stocks select products. Panel mounting drill size: 0.22 all valves. onsult factory. igure 3-Way / 1 on Pressure igure Way ngle / Replaceable Seat igure Way / 2-Stem anifold ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

5 umber of turns open eedle Valves - SW Series Pressures to 15,000 psi (103 bar) Tube Pressure Rating iameter Orifice psi (bar) Size onnection Size Room Inches Type Inches (mm) v * Temperature** 1/8 W125 Refer to 10V Series Valves 1/ SW (.77) ,000 (103) 3/8 SW (6.35) ,000 (103) 1/2 SW (9.52) ,000 (690) otes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. (ased on water) ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. eneralized low oefficient urves ( v ) 7 LOW RITIO LUIU ROZ P KI L POWR OT STILSS STL L 6 5 LOKI VI TI-XTRUSIO K-UP RIS O-ROTTI ST 3 Regulating Stem JUSTL P KI LOW TRS 2 OL WORK TYP 316 SS OY I IV PTTRS 1 Vee Stem OI O V OR RULTI ST TIP TL-TO-TL STI SPIT "SW" TU OTIOS (except 1/8" Speedite W) % of rated v To ensure proper fit use utoclave tubing Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see eedle Valve Options section or contact your Sales Representative. SW Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: SW071 SW Valve Series iameter Tube Size -1/ 6-3/8 8-1/2 07 Stem/Seat Type 07 - non-rotating Vee stem (on off service) 08 - non-rotating regulating stem (tapered tip for regulating and shutoff) 87 - Vee stem with replaceable seat 88 - Regulating stem with replaceable seat 1 ody Pattern 1 - two-way straight 2 - two-way angle 3 - three-way, two on pressure - three-way, one on pressure 5 - three-way, two stem manifold valve XX Options or extreme temperature and other options, see Valve Options. ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5

6 Valve Options xtreme Temperatures Standard utoclave valves with Teflon packing may be operated to 50 (232 ). igh temperature packing and/or extended stuffing box are available for service from 0 (-17.8 ) to 650 (33 ) by adding the following suffixes to catalog order number. T standard valve with Teflon glass packing to 600 (316 ). Y standard valve with graphite braided yarn packing to 650 (33 ). utoclave ngineers does not recommend compression sleeve connections below 0 (-17.8 ) or above 650 (33 ). or additional valve options, contact your Sales Representative. Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: RSW071) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found on the valve drawing or contact your Sales Representative for information. onsult your utoclave representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. lock imensions - inches (mm) atalog Stem iameter Orifice Thick- Valve umber Type Tube iameter 1 * ness Pattern 2-Way Straight SW071 V 1/ SW081 R (6.35) (.75) (50.80) (25.0) (9.65) (1.15) (30.23) (50.80) (76.20) (19.05) (5.59) (11.30) (15.75) (9.65) (19.05) SW6071 V 3/ SW6081 R (9.53) (6.35) (50.80) (25.0) (11.9) (1.15) (30.23) (50.80) (76.20) (19.05) (5.59) (11.30) (15.75) (9.65) (19.05) SW8071 V 1/ SW8081 R (12.70) (9.53) (63.50) (31.75) (13.6) (60.5) (.5) (73.15) (101.60) (25.0) (8.6) (151.37) (17.53) (12.70) (25.0) 2-Way ngle SW072 V 1/ SW082 R (6.35) (.75) (50.80) (25.0) (9.65) (30.23) (61.72) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) SW6072 V 3/ SW6082 R (9.53) (6.35) (50.80) (25.0) (11.9) (30.23) (55.63) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) SW8072 V 1/ SW8082 R (12.70) (9.53) (63.50) (31.75) (13.6) (.5) (85.85) (101.60) (25.0) (8.6) (163.83) (17.53) (12.70) (25.0) 3-Way / 2 on Pressure SW073 V SW083 R SW6073 V SW6083 R SW8073 V SW8083 R 1/ (6.35) (.75) (50.80) (25.0) (9.65) (1.15) (30.23) (66.55) (76.20) (19.05) (5.59) (131.57) (15.75) (9.65) (19.05) 3/ (9.53) (6.35) (50.80) (25.0) (11.9) (1.15) (30.23) (66.55) (76.20) (19.05) (5.59) (130.30) (15.75) (9.65) (19.05) 1/ (12.70) (9.53) (63.50) (31.75) (13.6) (60.5) (.5) (91.95) (101.60) (25.0) (8.6) (170.18) (17.53) (12.70) (25.0) igure 1 igure 2 igure 3 - Packing gland mounting hole drill size * imension is with stem in closed position. or prompt service, utoclave stocks - racket mounting hole size ll dimensions for reference only and subject to change. select products. onsult factory. Panel mounting drill size: 0.22 all valves. igure 1 igure 2 igure Way Straight 2-Way ngle 3-Way / 2 on Pressure 6 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

7 lock imensions -inches (mm) atalog Stem iameter Orifice Thick- Valve umber Type Tube iameter 1 * ness Pattern 3-Way / 1 on Pressure SW07 V 1/ SW08 R (6.35) (.75) (50.80) (25.0) (9.65) (30.23) (61.72) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) SW607 V 3/ SW608 R (9.53) (6.35) (50.80) (25.0) (11.9) (30.23) (61.72) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) SW807 V 1/ SW808 R (12.70) (9.53) (63.50) (31.75) (13.6) (.5) (85.85) (101.60) (25.0) (8.6) (163.83) (17.53) (12.70) (25.0) 2-Way ngle / Replaceable Seat SW872 V 1/ SW882 R (6.35) (.75) (50.80) (25.0) (9.65) (30.23) (7.75) (57.15) (76.20) (19.05) (5.59) (16.05) (15.75) (9.65) (19.05) SW6872 V 3/ SW6882 R (9.53) (6.35) (50.80) (25.0) (11.9) (30.23) (55.62) (57.15) (76.20) (19.05) (5.59) (16.05) (15.75) (9.65) (19.05) SW8872 V 1/ SW8882 R (12.70) (9.53) (63.50) (31.75) (13.6) (.5) (63.50) (82.55) (101.60) (25.0) (8.6) (190.75) (17.53) (12.70) (25.0) 3-Way / 2-Stem anifold SW075 V 1/ SW085 R (6.35) (.75) (50.80) (25.0) (9.65) (2.67) (30.23) (85.85) (76.20) (19.05) (5.59) (150.88) (15.75) (9.65) (19.05) SW6075 V 3/ SW6085 R (9.53) (6.35) (50.80) (25.0) (11.9) (2.67) (30.23) (85.85) (76.20) (19.05) (5.59) (150.88) (15.75) (9.65) (19.05) SW8075 V 1/ SW8085 R (12.70) (9.53) (63.50) (31.75) (13.6) (65.02) (.5) (130.05) (101.60) (25.0) (8.6) (208.28) (17.53) (12.70) (25.0) igure igure 5 igure 6 - Packing gland mounting hole drill size * imension is with stem in closed position. or prompt service, utoclave - racket mounting hole size ll dimensions for reference only and subject to change. stocks select products. onsult Panel mounting drill size: 0.22 all valves. factory. igure 3-Way / 1 on Pressure igure Way ngle / Replaceable Seat igure Way / 2-Stem anifold ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7

8 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.! WRI! ILUR OR IPROPR SLTIO OR IPROPR US O T PROUTS /OR SYSTS SRI RI OR RLT ITS US T, PRSOL IJURY /OR PROPRTY. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. Industrial state Whitemill-Wexford 8325 essinger rive Republic of Ireland rie, Pennsylvania US ISO-9001 ertified P: X: P: X: ste_sales@snap-tite.com ae_sales@snap-tite.com S-0109 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.