Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
|
|
|
- Shanon Rice
- 6 years ago
- Views:
Transcription
1 Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by one of the best service organizations in the industry. Ultra High Valves feature: Rising stem design. HP160 wetted parts with a 17-4 PH stem provides excellent corrosion resistance. Metal-to-metal seating achieves bubble-tight shut-off, longer stem and seat life and greater durability for repeated open and close cycles. PT and carbon packing with metal back-up rings offers reliable stem to body sealing. Non-rotating stem prevents stem to seat galling. Stem sleeve and packing gland materials have been selected to achieve optimum thread cycle life and reduced handle torque. ll stem sleeve threads are rolled, assuring smooth operation. Safety weep holes for all pressure connections and packing area. Three different valve body patterns, with vee type stem tip. MXPRO offers a complete line of ultra high pressure valves, fittings and tubing. They come standard with ultra high pressure coned and threaded connections. Ultra High Index Ultra High ittings rated to psi Tubing & oned and Threaded Nipples rated to psi Valves rated to psi ittings rated to 152,000 psi Tubing & oned and Threaded Nipples rated to 152,000 psi Ultra High dapters and ouplings Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Maxpro Technologies, Inc Klier rive South airview Pennsylvania Phone: ax: website: ll general terms and conditions of sale, including limitations of Printed in the US
2 Ultra medium High scrap high ittings ultra high s to psi - 1/4"- 3/8"- 9/16" HP onnection MXIMTOR ultra high pressure fittings are designed to be used with the ultra high pressure tubing and coned and threaded nipples. ll ultra high pressure fittings have coned and threaded type connections and are supplied with glands and collars. Mounting holes are standard on all elbows, tees, and crosses. medium scrap high ultra high Tubing land ollar Plug Tubing ap 1 / U 1014U 101P4U 101T4U 3 / U 1016U 101P6U 101T6U 9 / U 1019U 101P9U 101T9U onnection omponents ll high pressure fittings are supplied with glands and collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed. lbow itting Pattern atalog Number onn. O.. Orifice imensions lock Thickness 101L4U 4U 1 / L6U 6U 3 / L9U 9U 9 / Tee 101T4U 4U 1 / T6U 6U 3 / T9U 9U 9 / ross 101X4U 4U 1 / X6U 6U 3 / X9U 9U 9 / Straight oupling / Union oupling ulkhead oupling 1014U 101U4U 1016U 101U6U 1019U 101U9U 4U 1 / U 3 / U 9 / Straight oupling Union oupling Straight oupling Union oupling Straight oupling Union oupling 1014U 4U 1 / U 6U 3 / U 9U 9 / See page 2 in the Technical Section for pressure/temperature rating chart. ll dimensions for reference only and are subject to change. ll general terms and conditions of sale, including limitations of
3 Ultra High Tubing & Threaded Nipples s to psi - 1/4"- 3/8"- 9/16" HP onnection MXPRO offers a line of cold drawn thick wall tubing, with flow areas to compliment the ultra high pressure valve and fitting line. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the ultra high pressure coned and threaded connections. The standard material is HP160 stainless steel. Other materials may be provided on special request, depending on the specific material, diameters and lengths. Tubing Tolerances Normal Tubing Tolerance O.. 1/ / / / / /0.552 atalog Number Material its onnection Working (psi) O.. I to 100º 200º 400º 600º 800º 101TU4U-160 HP160 4U 1/ ,600 72,600 66,500 61, TU6U-160 HP160 6U 3/ ,600 72,600 66,500 61, TU9U-160 HP160 9U 9/ ,600 72,600 66,500 61,500 ll dimensions are for reference only and subject to change. oned and Threaded Nipples MXPRO offers a line of coned and threaded ultra high pressure tube nipples in a variety of lengths. The coned and threaded ultra high pressure tube nipples are available in HP160 stainless steel. See chart below for ordering information. Special length coned and threaded nipples are available upon request. onsult MXPRO for availability and price. 2.75" 3" atalog Numbers are HP160 Stainless Steel material 4" 6" 8" 10" 12" its onnection O.. I.. Working at 100 (psi) 101N4U N4U N4U N4U N4U N4U N4U U 1 / N6U N6U N6U N6U N6U N6U U 3 / N9U N9U N9U N9U N9U U 9 / ll general terms and conditions of sale, including limitations of Standard nipples are not supplied with glands and collars, see ittings on page 2 for these components. See the above chart for /Temperature Rating. ll dimensions are for reference only and subject to change. 3
4 Ultra High Valves s.to..psi.-.5/16" HP onnection O... onnection.. Orifice Rated. v* /Temp.. Rating. 1/ 4 4U / 16 5U / 8 6U Ordering Information Typical catalog number: 101V5U V 5U 07 1 Valve. Series O... 0V 4U / 4 " 5U 5 / 16 " 6U - 3 / 8 " Valve Pattern 2-Way Straight J Stem. ody.pattern 07 V stem 1 two-way straight 2 two-way angle 3 three-way, two on pressure H atalog Number Stem type O.. 101V4U071 Vee 1 / 4 101V5U071 Vee 5 / 16 Orifice * v values shown are for 2-way straight pattern vee stem valves. or 2-way angle patterns, increase the.v value by 50% ** See page 2 in the Technical Section for /Temperature Rating hart. Number of turns open low oefficient Reference urve (v) Vee Stem % of rated v Temperature Ranges Standard valves are supplied with Teflon/arbon packing and may be operated to 450. onsult MXPRO for higher temperature packing ratings. imensions H I J K Valve Panel Hole lock Thickness Way ngle I 1016U071 Vee 3 / 8 101V4U072 Vee 1 / 4 101V5U072 Vee 5 / J H I 101V6U072 Vee 3 / 8 1 / 3-Way 4 / 2 on 101V4U073 Vee 1 / 4 J I H 101V5U073 Vee 5 / K 101V6U073 Vee 3 / 8 - Panel mounting screw v UN. ll dimensions are for reference only and subject to change. 4 ll general terms and conditions of sale, including limitations of MT R4 04
5 medium scrap high ultra high Ultra High ittings s to 152,000 psi - 5/16" HP onnection MXIMTOR ultra high pressure fittings are designed to be used with the 101V series ultra high pressure valves and ultra high pressure tubing. ll ultra high pressure fittings have coned and threaded type connections and are supplied with glands and collars. Mounting holes are standard on all elbows, tees, and crosses. medium scrap high ultra high Tubing land ollar Plug Tubing ap 5 / U 1525U 152P5U 152T5U onnection omponents ll ultra high pressure fittings are supplied with glands and collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed. lbow itting Pattern atalog Number onn. O.. v Orifice imensions lock Thickness 152L5U 5U 5 / Tee 152T5U 5U 5 / ross 152X5U 5U 5 / Straight oupling / Union oupling 1525U Straight oupling 5U 5 / U5U Union oupling ulkhead oupling max. panel hole 1525U 5U 5 / ll general terms and conditions of sale, including limitations of See page 2 in the Technical Section for pressure/temperature rating chart. ll dimensions for reference only and are subject to change. 5
6 Ultra High Tubing & Threaded Nipples s to 152,000 psi - 5/16" HP onnection MXPRO offers a line of cold drawn thick wall tubing, with flow areas to compliment the ultra high pressure valve and fitting line. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the ultra high pressure coned and threaded connections. The standard material is 316 stainless steel. Tubing Tolerances Normal Tubing Tolerance O.. 5/ / atalog Number Material its onnection Working (psi) O.. I to 100º 200º 400º 600º 800º 152TU5U SS 5U 5 / , , , , ,440 ll dimensions are for reference only and subject to change. oned and Threaded Nipples MXPRO offers a line of coned and threaded ultra high pressure tube nipples in a variety of lengths. The coned and threaded ultra high pressure tube nipples are available in 316 stainless steel. See chart below for ordering information. Special length coned and threaded nipples are available upon request. onsult MXPRO for availability and price. 4" atalog Numbers are 316 Stainless Steel material 6" 8" 10" 12" its onnection O.. I.. Working at 100 (psi) 152N5U N5U N5U N5U N5U U 5 / ,000 Standard nipples are not supplied with glands and collars, see ittings on page 3 for these components. See the above chart for /Temperature Rating. ll dimensions are for reference only and subject to change. 6 ll general terms and conditions of sale, including limitations of
7 Ultra High dapters & ouplings s to 152,000 psi dapter (male x female) Male onnection emale onnection emale Ultra High Series (in) onn. Maximum (psi)* 1/4-4U 3/8-6U 9/16-9U 5/16-5U 152,000 1 / 4 4UM 1014U6U 1014U9U 1014U5U Male Ultra High 3 / 8 6UM 1016U4U 1016U9U 1016U5U 9 / 16 9UM 1019U4U 1019U6U 1019U5U 5 / 16 5UM 152, U4U 1015U6U 1015U9U ouplings (female x female) medium scrap high ultra high Series emale onnection (in) onn. Maximum (psi)* 1/4-4U emale onnection emale Ultra High 3/8-6U 9/16-9U 5/16-5U 152,000 1 / 4 4U 1014U 1014U6U 1014U9U 1014U5U emale Ultra High 3 / 8 6U 1016U 1016U9U 1016U5U 9 / 16 9U 1019U 1019U5U 5 / 16 5U 152, U dapter (male x male) Male onnection Male onnection Male Ultra High Series (in) onn. Maximum (psi)* 1/4-4U 3/8-6U 9/16-9U 5/16-5U 152,000 1 / 4 4UM 101M4U 101M4U6U 101M4U9U 101M4U5U Male Ultra High 3 / 8 6UM 101M6U 101M6U9U 101M6U5U 9 / 16 9UM 101M9U 1019U5U 5 / 16 5UM 152, M5U Special lands & ollars to adapt 1/4 UHP male nipples to 5/16 UHP female connections land ollar * The pressure rating of any adapter is the value of the lowest rated connection in the fitting. ll general terms and conditions of sale, including limitations of 7
Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi (4,500 bar)
igh Pressure Valves, ittings and Tubing Pressures to psi (4,00 bar) MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 22,500 psi (1,500 (1,550 bar)
Medium Valves, ittings Tubing s to 22,00 psi (,00 (,0 bar) MXIMTOR has been designing manufacturing high pressure equipment for more than thirty years has a worldwide reputation for quality reliability,
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TEHNOLOGY HYRULIS PNEUMTIS TESTING EQUIPMENT Ultra Valve cross sections Gland with packing of copper aluminium alloy for smooth running ody Non-rotating stem of 17-4 PH prevents scoring in
Adapters, Couplings & Accessories Pressures to 152,000 psi
dapters, Couplings & ccessories s to 152,000 psi MXIMTOR designs and manufactures a wide variety of adapters and couplings in an array of styles and sizes. The adapters in this section are considered standard
Group 6. 10K High Pressure Fittings Tubing Nipples Adaptors
Group 0K High Pressure Fittings Tubing Nipples Adaptors INEX Page ontents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JI-JI, JI - NPT 5 X-Overs - HP Fittings / Male Threads -8 High Pressure Fitting and
Oil and Gas Products Pressures to 30,000 psi
Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil
Fittings and Tubing QS Series
Fittings and Tubing QS Series Medium Since 1945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned
Needle Valves. SM Series. Needle Valves - SM Series. Medium Pressure Valve Features: Medium Pressure. Pressures to 20,000 psi (1379 bar)
Needle Valves edium Pressure S Series Pressures to 20,000 psi (1379 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
Needle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure
eedle Valves Low Pressure 10V & SW Series Pressures to 15,000 psi (103 bar) Since 195 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
Needle Valves. Needle Valves - High Pressure. High Pressure 30SC, 30VM, 40VM, 60VM, 100VM, & 150V Series. Pressures to 150,000 psi (10342 bar)
eedle Valves igh Pressure 30S, 30V, 40V, 60V, 00V, & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing. This
Needle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, Parker utoclave ngineers has designed and built premium quality valves, fittings and
Needle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
eedle Valves igh Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing. This
Needle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure. Pressures to 15,000 psi (1034 bar)
Needle Valves Low Pressure 10V & SW Series Pressures to 15,000 psi (103 bar) Since 195 Parker utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
Adapters, Couplings & Accessories Pressures to 152,000 psi
dapters, Couplings & ccessories s to 152,000 psi MXIMTOR designs and manufactures a wide variety of adapters and couplings in an array of styles and sizes. The adapters in this section are considered standard
Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker utoclave Engineers: Fluid omponents Product February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since
Ball Valves Pressures to 21,000 psi
Ball s s to 21,000 psi MAXIMATOR ball valves provide superior quality and performance with a variety of valve styles and process connections. All medium and high pressure connections are supplied with
Fittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)
ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
20 Series Tube Fittings and Tubes
20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect
Fittings, Tubing & Nipples
Fittings, Tubing & Nipples Medium s to 20,000 psi (1379 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
High Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
Fittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
Fittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker Autoclave Engineers: Fluid omponents Product atalog February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034
Quick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
QSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)
QSS: Quick Set System Product Catalog Compression Sleeve Valves and Fittings to psi (1034 bar) Section Page Introduction.............................. 2 QS Needle Valves........................... 4 QS
VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
SUBSEA VALVES
SUBSEA VALVES Fitok Subsea Valves are manufactured with some notable differences to standard models to help ensure effective fluid transfer for the Oil and Gas Industry. Valves within the range include
VCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
LX Hand Pump Oil. hand pumps - anti-sludge, anti-rust additives. HF oil - good low temperature performance. Dimensions (in) Model No. A-64 A-65 1.
Hydraulic Oil, Manifolds and Fittings Shown top to bottom: HF-, HF-, HF-2, LX-, 6, and FZ Enerpac System omponents HF Oil power pumps efficiency - prevents cavitation - anti-sludge, anti-rust, anti-foam
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
TrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
Swagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
Group 8. High Pressure Fittings and Tubing
Group 8 High Pressure Fittings and Tubing 8 INDEX Page Contents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JIC-JIC 5 0K Fittings JIC-NPT 6 0K Fittings BSP-BSP 7 0K Fittings BSP-JIC, BSP-NPT 8 Adapters
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
Metal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
Series 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal
onstruction Miniature fittings Hose nipple arb fitting arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal Tubing ap nut ertainly
HAM-LET HIGH PRESSURE UP TO 60,000 PSI
HM-LT HIH PRSSUR UP TO 60,000 PSI HM-LT Pressure Ham-Let roup, a worldwide company, has produced high quality fittings, valves, and instrumentation solutions since its establishment in 1950. Our company
Couplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
Pneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
Pneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
Miniature Solenoid Valves
Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat
TrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:
Parker s TrueSeal Fittings are lightweight, field attachable and connect to tubing without the use of tools. These all plastic push-to-connect fittings are manufactured from F compliant materials. Product
10 Series Tube Fittings and Tubing
0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade
Fittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
metering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
Tubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.
Series 10-M Miniature Fittings onstruction RoHS irectional ontrol Valves arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal
Available with T93R MAXX Tip & Guard
7500 PSI (500 BAR) Maximum Pressure Airless Gun High-strength aluminum alloy handle is light-weight, solid and strong single piece forging that features an anodized protective finish that is highly corrosive
Pneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
60 Series Tube Fittings and Tubing
60 Series Fittings and ubing 60,000 psi (4137 bar) FIOK Group FIOK GmbH (Headquarter) Sprendlinger andstr. 115, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 Fax: +49 69 8900 4495 FIOK, Inc. 13843
Thermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings
Medium Pressure Instrumentation Ball & Needle Valves, Fittings & Relief Valves
Medium Pressure Instrumentation Ball & Needle Valves, Fittings & Relief Valves (Up to and including 20,000 psi / 1,379 bar) Keeping the World Flowing Contents Page Contents Black - Instrumentation Ball
Index 1.1. Page. Valve Design Valve Selector Guide Catalog Numbering System Warranty & Terms R1 6/13
High Equipment General Information High Equipment Company has developed an extensive line of components and systems designed to satisfy the unique requirements of elevated pressure applications. Since
VCR Metal Gasket Face Seal Fittings
lloy 2507 Super uplex Weld Fittings 1 www.swagelok.com Metal Gasket Face Seal Fittings WL 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Weld,,
Durco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
Valves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
Pneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
Semiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
Products for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
High Pressure Equipment 4 - Ultra High Pressure Valves, Fittings and Tubing 100,000 and 160,000 psi service
Solutions de régulation des fluides igh Pressure quipment 4 - Ultra igh Pressure Valves, ittings and Tubing 00,000 and 60,000 psi service Petrometalic SA 2, rue de l rmitage 8000 VRSAIS www.petrometalic.com
Pipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
Tension Brakes/High Heat Capacity
IST. UTORIZO Tension rakes/igh eat apacity MX (55) 53 63 23 31 Steel Water ooled rakes ost effective design One piece water jacket eliminates leakage Release springs ensure complete disengagement New friction
Formed Sampling Cylinders and Accessories Index amp ling cylinde HOKE Inc.
Formed Sampling Cylinders and Accessories Index Sampling Cylinders 2 Design, Features, Applications Cylinder Accessories 3 Collars, Flanges, Caps, Carrying Handles Safety Relief Devices Cylinder Valves
Miniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Metering Valves Catalog 4170-MV December 2010
Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering
Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories
Medium- and High- Fittings, Tubing, Valves, and ccessories 1 www.swagelok.com www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, CTB, and Sno-Trik Series Products
CART -AWAY CUBE (NATO) Cart-Away Concrete Systems. Table of Contents. Conveyor Drive Motor See Section Conveyor See Section 1-1
Table of ontents RT -WY art-way oncrete Systems UE (NTO) Parts atalog ustomer Service Hot Line onveyor See Section - onveyor rive Motor See Section 6- ccess Limiting Panels See OPT iverter See Section
Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories
www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, and Sno-Trik Series Products Rated up to 60 000 psig (4134 bar) nd connections up to 1 1/2 and 12 mm NC MR0175/ISO15156
APS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator
HAM-LET PRECISION INSTRUMENT PIPE FITTINGS
M- PRISION INSRUMN PIP IINS NR he M- Pipeline range of connectors is manufactured for typical applications in chemical and petrochemical processing plants, as well as oil, gas and power generation industries.
Medium Pressure Products
Medium Products Fittings and Valves 6,000 15,000 PSI Range Catalog 4234 August 2010 Medium Fittings Catalog 4234 Introduction Hannifin Fittings are engineered and manufactured to provide secure, tight,
Series 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50
ouplings for polyethylene pipe series cert. n 0003 ISO 9001 LFFI 01037/03 G Function couplings, which are supplied in brass for diameters up to 63 mm and in cast iron for larger sizes, are used for connecting
GENE RICH SPECIALTIES
All s Final - No Returns Allowed Attn: Plumbing Specialties Buyers Limited Time for Super Savings on Select Items: Faucets and Supplies Compression Tees and Couplings Dielectric Unions Red, Yellow and
Tube Applicable for nylon, soft nylon and polyurethane tubing.
Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
421WC A A-9 AX A-9 482TC A-10. Tough Cover SAE 100R1 TYPE AT 482ST A-10 BXX A A A-11
atalog 4400 US Hydraulic Visual Index 601-8 422-8 424-8 Hydraulic Hydraulic 421W -9 426-9 X -9 482T -10 S 100R1 TYP T Protective Wire over S 100R3 High Temperature S 100R1 TYP T Worldwide ISO 1436-1 TYP
Automatic Positioning System APS
Automatic Positioning System APS 0 MODULES pag. 0. 2 CLAMPING PINS pag. 0. 5 / 0. 8 PLATES pag. 0. 9 PLATES FOR 5 AXIS pag. 0. 13 ANGLE PLATE pag. 0. 21 TOMBSTONES pag. 0. 26 CRANKWEBS pag. 0. 30 STEEL