HAM-LET PRECISION INSTRUMENT PIPE FITTINGS
|
|
|
- Eugenia Atkins
- 5 years ago
- Views:
Transcription
1 M- PRISION INSRUMN PIP IINS
2 NR he M- Pipeline range of connectors is manufactured for typical applications in chemical and petrochemical processing plants, as well as oil, gas and power generation industries. UR Sizes range from 1/16 to 2. ittings are properly packaged with the exposed threads protected to ensure they are not damaged during delivery. ll pipe threads meet the requirements of SM/NSI (1983) for tapered pipe threads (NP). orking pressures are calculated in accordance with Power Piping ode NSI 31.1, Refiner Piping ode SM/NSI 31.3 and section VIII of SM oiler & Pressure Vessel ode. PRSSUR RINS (PSI) NP or SP/ISO size SINSS S 316 RSS inch male female male female 1/ / / / / / / / MRIS MRI SINSS S 316 RSS arstock SM -276 SM -479 SM -453 SM -16 IN Specifications orgings SM -182 SM -283 INSION INSRUIONS o ensure a leak-tight seal, M- recommends the use of a pipe thread sealant on all NP threads. he most effective sealing method is P tape. ape should be used only on male tapered pipe threads. o not use tape on flared, coned or tube fitting ends! lean both male and female tapered threads. rap tape in the direction of the male tapered thread spiral. Note: wo wraps are suggested for stainless steel tapered pipe threads. Make sure tape does not overhang the first thread, as the tape might shred and enter the fluid system. ut off excess tape. he connection is now ready for proper makeup. ORRIN INORMION XMP: 120 Material escription 1/2 x 1/4 SS - Stainless Steel rass ll orders should include ordering information and material description. 98 PRISION INSRUMNION PIP IINS
3 PIPIN INX RUIN USIN S/MS SRI R OSS 110O 104 X NIPP O X ON NIPP X NIPP M NP O M SP 122NR 109 M O 100M 100 SR O X NIPP M NP O M SPP 122N X RUIN OUPIN X NIPP NP 0 S/MS SRI OSS 122NO 110 M 101M 101 PR NP OS NIPP 122N 110 ROSS PR NP M O M SP 120NR 106 RUIN NIPP X OUPIN PR M NP O M SPP 120N 107 RN UNION ROR PR NP O S/MS SRI R OSS 120NO 107 SR OO X PUS PR M SP O M NP 120RN 107 M OS ONNOR 130M 112 OO X PUS S/MS SRI R OSS 107O 102 U PR M SPP O M NP 120N 108 M OS ONNOR PIP P PIP PU NP U O OS ONNOR RUIN USIN X PU 108 S/MS SRI R OSS 121O M- VN ONRO NOOY 99
4 100 O emale NP size N rench lat 100 _ 1/8 1/ /8 100 _ 1/4 1/ / _ 3/8 3/ / _ 1/2 1/ /8 100 _ 3/4 3/ /8 100 _ / M M O Male NP Size N rench lat 100M _ 1/8 1/ /2 100M _ 1/4 1/ /8 100M _ 3/8 3/ /16 100M _ 1/2 1/ / emale NP Size N rench lat 101 _ 1/8 1/ /8 101 _ 1/4 1/ / _ 3/8 3/ / _ 1/2 1/ /8 101 _ 3/4 3/ /8 101 _ /16 imension is minimum opening. imensions are for reference only, and are subject to change without notice. 100 PRISION INSRUMNION PIP IINS
5 101 M M Male NP Size N rench lat 101M _ 1/8 1/ /2 101M _ 1/4 1/ /8 101M _ 3/8 3/ /16 101M _ 1/2 1/ / ROSS emale NP Size N M rench lat mm inch 102 _ 1/8 1/ /8 102 _ 1/4 1/ / _ 3/8 3/ / _ 1/2 1/ _ 3/4 3/ /4 102 _ / X OUPIN emale NP size 103 _ 1/8 1/ / _ 1/4 1/ /4 103 _ 3/8 3/ /8 103 _ 1/2 1/ / _ 3/4 3/ / _ /8 imension is minimum opening. imensions are for reference only, and are subject to change without notice. M- VN ONRO NOOY 101
6 104 UNION ROR emale NP Size 1 mm inch 104 _ 1/8 1/ / /8 104 _ 1/4 1/ / /8 104 _ 3/8 3/ / /2 104 _ 1/2 1/ / /4 104 _ 3/4 3/ / _ / /2 107 OO X PUS Male NP Size inch mm inch 107 _ 1/8 1/ / _ 1/4 1/ /4 107 _ 3/8 3/ / _ 1/2 1/ /8 107O OO X PU S/MS SRI R OSS * Straight hread UN mm inch O-Ring** 107O _ 7/ / / O _ 1/2-20 1/ / O _ 9/ / / O _ 3/4-16 3/ / * Per S J1926 and MS See page 78 for mounting dimensions. ** O-rings used are Viton 90 urometer. Other O-ring materials are available on request. 102 PRISION INSRUMNION PIP IINS
7 108 PIP P emale NP Size inch mm inch 108 _ 1/8 1/ / _ 1/4 1/ /4 108 _ 3/8 3/ /8 108 _ 1/2 1/ / _ 3/4 3/ / _ /8 110 RUIN USIN Male NP Size 1 emale NP Size 110 _ 1/8 X 1/16 1/8 1/ / _ 1/4 X 1/8 1/4 1/ / _ 3/8 X 1/8 3/8 1/ / _ 3/8 X 1/4 3/8 1/ /4 110 _ 1/2 X 1/8 1/2 1/ /8 110 _ 1/2 X 1/4 1/2 1/ /8 110 _ 1/2 X 3/8 1/2 3/ /8 110 _ 3/4 X 1/4 3/4 1/ / _ 3/4 X 3/8 3/4 3/ / _ 3/4 X 1/2 3/4 1/ / _ 1 X 1/4 1 1/ /8 110 _ 1 X 3/8 1 3/ /8 110 _ 1 X 1/2 1 1/ /8 110 _ 1 X 3/4 1 3/ /8 110 _ 1 1/4 X 1/2 1 1/4 1/ /4 110 _ 1 1/4 X 3/4 1 1/4 3/ /4 110 _ 1 1/4 X 1 1 1/ /4 110 _ 1 1/2 X 1/2 1 1/2 1/ /8 110 _ 1 1/2 X 3/4 1 1/2 3/ /8 110 _ 1 1/2 X 1 1 1/ /8 110 _ 1 1/2 X 1 1/4 1 1/2 1 1/ /8 110 _ 2 X 1/2 2 1/ /4 110 _ 2 X 3/4 2 3/ /4 110 _ 2 X /4 110 _ 2 X 1 1/ / /4 110 _ 2 X 1 1/ / /4 imension is minimum opening. imensions are for reference only, and are subject to change without notice. M- VN ONRO NOOY 103
8 110O RUIN USIN S/MS SRI R OSS * Straight hread UN 1 Straight hread UN mm inch O-Ring** 110O _ 9/16-18 X 7/ / / / O _ 3/4-16 X 7/ /4-16 7/ / O _ 3/4-16 X 9/ /4-16 9/ O _ 3/4-16 X 7/8-14 3/4-16 7/ / O _ 7/8-14 X 9/ /8-14 9/ O _ 7/8-14 X 3/4-16 7/8-14 3/ / O _ 1 1/16-12 X 3/ / / / O _ 1 5/16-12 X 1 1/ / / / O _ 1 5/8-12 X 1 5/ / / / O _ 1 7/8-12 X 1 5/ / / / X ON NIPP Male NP Size vailable engths (inch) inch mm inch 113 _ 1/8 X 1.5 / 2 / 2.5 / 3 1/ / _ 1/4 X 1.5 / 2 / 2.5 / 3 / 4 1/ / _ 3/8 X 1.5 / 2 / 2.5 / 3 / 4 3/ / _ 1/2 X 2 / 3 / 4 1/ /8 113 _ 3/4 X 2 / 3 / 4 3/ / _ 1 X 3 / /8 * Per S J1926 and MS See page 78 for mounting dimensions. ** O-rings used are Viton 90 urometer. Other O-ring materials are available on request. imension is minimum opening. imensions are for reference only, and are subject to change without notice. 104 PRISION INSRUMNION PIP IINS
9 116 SR O emale NP Size 1 Male NP Size N N1 rench lat mm inch 116 _ 1/16 X 1/16 1/16 1/ / _ 1/8 X 1/16 1/8 1/ /8 116 _ 1/8 X 1/8 1/8 1/ /8 116 _ 1/4 X 1/8 1/4 1/ / _ 1/4 X 1/4 1/4 1/ / _ 3/8 X 1/4 3/8 1/ / _ 3/8 X 3/8 3/8 3/ / _ 1/2 X 1/4 1/2 1/ /8 116 _ 1/2 X 3/8 1/2 3/ /8 116 _ 1/2 X 1/2 1/2 1/ /8 116 _ 3/4 X 3/4 3/4 3/ /8 116 _ 1 X / X RUIN OUPIN emale NP Size 1 emale NP Size Min. opening 119 _ 1/4 X 1/8 1/4 1/ /4 119 _ 3/8 X 1/4 3/8 1/ /8 119 _ 1/2 X 1/8 1/2 1/ / _ 1/2 X 1/4 1/2 1/ / _ 1/2 X 3/8 1/2 3/ / _ 3/4 X 1/4 3/4 1/ / _ 3/4 X 1/2 3/4 1/ / _ 1 X 1/2 1 1/ /8 119 _ 1 X 3/4 1 3/ /8 imension is minimum opening. imensions are for reference only, and are subject to change without notice. M- VN ONRO NOOY 105
10 120 PR NP emale NP Size 1 Male NP Size 120 _ 1/8 X 1/16 1/8 1/ / _ 1/8 X 1/8 1/8 1/ / _ 1/4 X 1/8 1/4 1/ /4 120 _ 1/4 X 1/4 1/4 1/ /4 120 _ 3/8 X 1/8 3/8 1/ /8 120 _ 3/8 X 1/4 3/8 1/ /8 120 _ 3/8 X 3/8 3/8 3/ /8 120 _ 1/2 X 1/8 1/2 1/ / _ 1/2 X 1/4 1/2 1/ / _ 1/2 X 3/8 1/2 3/ / _ 1/2 X 1/2 1/2 1/ / _ 3/4 X 1/4 3/4 1/ / _ 3/4 X 3/8 3/4 3/ / _ 3/4 X 1/2 3/4 1/ / _ 3/4 X 3/4 3/4 3/ / _ 1 X 1/4 1 1/ /8 120 _ 1 X 1/2 1 1/ /8 120 _ 1 X 3/4 1 3/ /8 120 _ 1 X /8 120 NR PR NP O SP emale NP Size 1 Male SP ISO 7/1, S21 Size N mm inch 120NR _ 1/8 1/8 1/ /16 120NR _ 1/4 1/4 1/ /4 120NR _ 3/8 3/8 3/ /8 120NR _ 1/2 1/2 1/ /16 120NR _ 3/4 3/4 3/ /16 120NR _ /8 imension is minimum opening. imensions are for reference only, and are subject to change without notice. 106 PRISION INSRUMNION PIP IINS
11 120 N PR NP O SPP emale NP Size 1 Male SPP ISO 228/1, S 2779 ia. mm inch mm inch 120N _ 1/8 1/8 1/ /16 120N _ 1/4 1/4 1/ /4 120N _ 3/8 3/8 3/ /8 120N _ 1/2 1/2 1/ /16 120N _ 3/4 3/4 3/ /16 120N _ /8 120NO PR NP O S/MS SRI R OSS * emale NP Size 1 Straight hread UN mm inch O-Ring** 120NO _ 1/4 X 7/ /4 7/ / NO _ 3/8 X 9/ /8 9/ / NO _ 1/2 X 3/4-16 1/2 3/ / NO _ 3/4 X 1 1/ /4 1 1/ / NO _ 1 X 1 5/ / / RN PR SP O NP emale SP ISO 7/1, S21 1 Male NP size N mm inch 120RN _ 1/4 1/4-19 1/ /4 120RN _ 3/8 3/8-19 3/ /8 120RN _ 1/2 1/2-14 1/ /16 * Per S J1926 and MS See page 78 for mounting dimensions. ** O-rings used are Viton 90 urometer. Other O-ring materials are available on request. imension is minimum opening. imensions are for reference only, and are subject to change without notice. M- VN ONRO NOOY 107
12 120 N U PR SPP O NP emale SPP ISO 228/1, S 2779 Size 1 Male NP Size N mm inch 120N _ 1/4 1/4-19 1/ /4 120N _ 3/8 3/8-19 3/ /16 120N _ 1/2 1/2-14 1/ / PIP PU NP Male NP Size inch inch 121 _ 1/16 1/ / _ 1/8 1/ / _ 1/4 1/ / _ 3/8 3/ / _ 1/2 1/ /8 121 _ 3/4 3/ / _ /8 mm 121O X PU S/MS SRI R OSS* Straight hread UN O-Ring** 121O _ 5/ / / O _ 7/ / / O _ 9/ / / O _ 3/4-16 3/ / O _ 1 1/ / / O _ 1 5/ / /2-916 * Per S J1926 and MS See page 78 for mounting dimensions. ** O-rings used are Viton 90 urometer. Other O-ring materials are available on request. imension is minimum opening. imensions are for reference only, and are subject to change without notice. 108 PRISION INSRUMNION PIP IINS
13 122 X NIPP Male NP Size 122 _ 1/16 1/ / _ 1/8 1/ / _ 1/4 1/ / _ 3/8 3/ / _ 1/2 1/ /8 122 _ 3/4 3/ / _ /8 122 NR X NIPP NP O SP Male NP Size 1 Male SP ISO 7/1, S21 Size N mm inch 122NR _ 1/8 1/8 1/ /16 122NR _ 1/4 1/4 1/ /16 122NR _ 3/8 3/8 3/ /16 122NR _ 1/2 1/2 1/ /8 122NR _ 3/4 3/4 3/ /16 122NR _ /8 imension is minimum opening. imensions are for reference only, and are subject to change without notice. M- VN ONRO NOOY 109
14 122 N X NIPP NP O SPP Male NP Size 1 Male SPP ISO 228/1, S 2779 mm inch mm inch 122N _ 1/8 1/8 1/ /16 122N _ 1/4 1/4 1/ /4 122N _ 3/8 3/8 3/ /8 122N _ 1/2 1/2 1/ /16 122N _ 3/4 3/4 3/ /16 122N _ /8 122NO X NIPP NP O S/MS SRI R OSS * Male NP Size 1 Straight hread UN mm inch O-Ring** 122NO _ 1/4 X 7/ /4 7/ / NO _ 3/8 X 9/ /8 9/ / NO _ 1/2 X 3/4-16 1/2 3/ / NO _ 3/4 X 1 1/ /4 1 1/ / NO _ 1 X 1 5/ / / N OS NIPP Male NP Size inch mm inch mm 122N _ 1/8 1/ N _ 1/4 1/ N _ 3/8 3/ N _ 1/2 1/ N _ 3/4 3/ N _ * Per S J1926 and MS See page 78 for mounting dimensions. ** O-rings used are Viton 90 urometer. Other O-ring materials are available on request. imension is minimum opening. imensions are for reference only, and are subject to change without notice. 110 PRISION INSRUMNION PIP IINS
15 123 RUIN NIPP Male NP Size 1 Male NP Size 123 _ 1/8 X 1/16 1/8 1/ / _ 1/4 X 1/8 1/4 1/ / _ 3/8 X 1/8 3/8 1/ / _ 3/8 X 1/4 3/8 1/ / _ 1/2 X 1/8 1/2 1/ /8 123 _ 1/2 X 1/4 1/2 1/ /8 123 _ 1/2 X 3/8 1/2 3/ /8 123 _ 3/4 X 1/4 3/4 1/ / _ 3/4 X 1/2 3/4 1/ / _ 1 X 1/2 1 1/ /8 123 _ 1 X 3/4 1 3/ / RN Male & emale NP M N N1 rench lat mm inch mm inch 3600 _ 1/8 1/ / _ 1/4 1/ / _ 3/8 3/ / _ 1/2 1/ /8 imension is minimum opening. imensions are for reference only, and are subject to change without notice. M- VN ONRO NOOY 111
16 3750 SR Male & emale NP M N N1 rench lat mm inch mm inch 3750 _ 1/8 1/ / _ 1/4 1/ / _ 3/8 3/ / _ 1/2 1/ /8 130 M M O OS ONNOR ose I.. Male NP Size 1 mm mm inch 130M _ 1/8 X 1/8 1/8 1/ /16 130M _ 1/8 X 1/4 1/8 1/ /16 130M _ 3/16 X 1/8 3/16 1/ /16 130M _ 3/16 X 1/4 3/16 1/ /16 130M _ 1/4 X 1/8 1/4 1/ /16 130M _ 1/4 X 1/4 1/4 1/ /16 130M _ 1/4 X 3/8 1/4 3/ /16 130M _ 1/4 X 1/2 1/4 1/ /8 130M _ 5/16 X 1/8 5/16 1/ /16 130M _ 5/16 X 1/4 5/16 1/ /16 130M _ 5/16 X 3/8 5/16 3/ /16 130M _ 5/16 X 1/2 5/16 1/ /8 130M _ 3/8 X 1/4 3/8 1/ /16 130M _ 3/8 X 3/8 3/8 3/ /16 130M _ 3/8 X 1/2 3/8 1/ /8 130M _ 1/2 X 1/4 1/2 1/ /16 130M _ 1/2 X 3/8 1/2 3/ /16 130M _ 1/2 X 1/2 1/2 1/ /8 130M _ 5/8 X 1/2 5/8 1/ /16 130M _ 5/8 X 3/4 5/8 3/ /16 130M _ 3/4 X 1/2 3/4 1/ /16 130M _ 3/4 X 3/4 3/4 3/ /16 130M _ 3/4 X 1 3/ /8 130M _ 1 X 3/4 1 3/ /8 130M _ 1 X /8 imension is minimum opening. imensions are for reference only, and are subject to change without notice. 112 PRISION INSRUMNION PIP IINS
17 130 M OS ONNOR ose I.. NP Size mm inch mm inch 130 _ 1/8 X 1/8 1/8 1/ / _ 1/8 X 1/4 1/8 1/ /4 130 _ 3/16 X 1/8 3/16 1/ / _ 3/16 X 1/4 3/16 1/ /4 130 _ 1/4 X 1/8 1/4 1/ / _ 1/4 X 1/4 1/4 1/ /4 130 _ 1/4 X 3/8 1/4 3/ /8 130 _ 5/16 X 1/4 5/16 1/ /4 130 _ 5/16 X 3/8 5/16 3/ /8 130 _ 3/8 X 1/4 3/8 1/ /4 130 _ 3/8 X 3/8 3/8 3/ /8 130 _ 3/8 X 1/2 3/8 1/ / _ 1/2 X 1/2 1/2 1/ / U O OS ONNOR ose I.. ube Size 1 I mm mm inch 130 _ 1/8 X 1/8 1/8 1/ / _ 1/8 X 1/4 1/8 1/ /8 130 _ 1/4 X 1/4 1/4 1/ / _ 1/4 X 3/8 1/4 3/ / _ 1/4 X 6 MM 1/4 6mm / _ 5/16 X 1/4 5/16 1/ / _ 3/8 X 3/8 3/8 3/ / _ 3/8 X 1/2 3/8 1/ /8 130 _ 1/2 X 3/8 1/2 3/ / _ 1/2 X 1/2 1/2 1/ / _ 3/4 X 3/4 3/4 3/ /16 imension is minimum opening. imensions are for reference only, and are subject to change without notice. M- VN ONRO NOOY 113
18 114 PRISION INSRUMNION PIP IINS
HAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM
OMPRSSION U IINS 1/16 ROU 2 2 MM ROU 50 MM L-LOK U IINS SRIPION L-LOK O OS I ORK? he L-LOK tube fitting is a mechanism used both to seal and to grip tubing. he mechanical advantage and geometry of this
gyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
gyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
GYROLOK. Tube Fittings
ube ittings Index YROOK itting ocator 2-7 YROOK eatures & enefits 8 YROOK esign 9 ow to Order 10 Pipe hread Information 11 S ittings Information 11 YROOK itting imensional & pplication ables 12 Replacement
HAM-LET POSITIONABLES ELBOW & TEE
H POSOBS BO & PROUCS UP POSOBS PR S J26 S 16142 769 OB BO UB O S/S SRGH HR BOSS (POSOB)* 1 ** nformation ube O.. S/S 769OB SS 1/4 X 7/1620 769OB SS 1/4 X 9/1618 769OB SS 3/8 X 9/1618 1/4 6.35 7/1620 0.
20 Series Tube Fittings and Tubes
20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
Product Features: Ultra-High Purity cleaning, assembly, and packaging in a Class 100 Clean Room environment for all wetted components.
ittings Metal ace Seal and Weld ittings ittings designed for ultra-high purity conditions for critical applications hese UP fittings are designed for critical applications where ultra-high pure conditions
Pneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
ins LET-LOK (IMPERIAL) TUBE FITTINGS Page About Twin Ferrule Compression Fittings 2 Installation Instructions 3
ins bout win Ferrule Compression Fittings 2 nstallation nstructions 3 Conventions mperial Metric Page 4 32 ndex to et-ok mperial Fittings 4-5 -OK (MPR) UB FGS ndex to et-ok Metric Fittings 32-33 mm ndex
Semiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
Metal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
Instrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
Couplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 HROUGH 2 -INCH, 2 MM HROUGH 50 MM-MERIC LE-LOK UBE FIINGS ESCRIPION he HM-LE GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications since its establishment
COMPRESSION TUBE FITTINGS CONNECTORS
COMPRESSION UBE FIINGS CONNECORS 1/16 HROUGH 2 2 MM HROUGH 50 MM LE-LOK HO OES I ORK? LE-LOK UBE FIINGS ESCRIPION CONNECORS he LE-LOK tube fitting is a mechanism used both to seal and to grip tubing. he
VCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
Safety Stations with Eye/Face Wash
Safety Stations with ye/face Wash F G1950 Safety Station with ye/face Wash, Stainless Steel owl pplication: ombination eye/face wash and shower safety station. Two large FS-Plus spray-type outlet heads
Section 4 Flanges. Edition 3
Section 4 langes dition 3 65 [4] LNGS Specifications SPIITIONS: NSI 16.5 - Pipe langes and langed ittings (merican) S2129 - langes for Pipes, Valves and ittings (ustralian) S4504 - ircular langes for Pipe,
CAST IRON THREADED FITTINGS
q IGUR 59 Size lack NPS N NPS N NPS N in mm in mm in mm in mm in mm in mm lbs kg /4 8 /6 7 /6 7 /6 22 /8 29 /8 29 /8 29 0.57 0.26 /2 5 /2 5 /8 0 /6 7 /6 7 /4 9 /8 29 /8 29 /8 29 0.57 0.26 /4 20 /6 22 /6
Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
Product Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
... i. ... ii. ... iii. ... v. ... vii. General Characteristics & Order Information. ... x ... A ... B ... C ... D ... E
M E H N I L L Y T T H E F I T T I N G S Table of ontents Table of ontents.............................................................................. i etailed Table of ontents..............................................................................
Pneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
Fittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
Swagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
Griplok. Tube Fittings. Quality Instrumentation Fittings
ube ittings Quality Instrumentation ittings ompany Information 1926 SSP ittings orp. is founded in leveland, Ohio, U.S.. SSP begins as a contract manufacturer of screw machine products in brass and carbon
10 Series Tube Fittings and Tubing
0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade
Series 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50
ouplings for polyethylene pipe series cert. n 0003 ISO 9001 LFFI 01037/03 G Function couplings, which are supplied in brass for diameters up to 63 mm and in cast iron for larger sizes, are used for connecting
Fluid Power 7 FLUID POWER TABLE OF CONTENTS
UI POWR luid Power SION PG NO. UI POWR SSORIS & OOS -1-1 O 8 RSS IINGS -2-1 O 26 S, SINSS & M IINGS -3-1 O 32 PSI IINGS -4-1 O 8 UING -5-1 O 2 WHRH HYRUIS -6-1 O 28 GS HYRUIS --1 O 24 VVS & OUPRS -8-1
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
1-14 Fittings and Accessories
-4 ittings and ccessories entricast Piping Systems NOV iber Glass Systems offers a complete line of fittings manufactured from both epoxy and vinyl ester resins. These fittings and adhesives provide the
Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
Safety Stations with Eyewash
Safety Stations with yewash F G1942 Safety Station with yewash, Freeze and Scald Protection Valves pplication: ombination eyewash and shower safety station. Unit is furnished with temperature-actuated
BRASS PIPE FITTINGS 100A-BA. CONSTRUCTION CA360, CA345, CA3604, CA377 Brass. Use with brass, copper or iron pipe. Temperature Range: 65 to +250 F.
RSS FITTINGS RSS FITTINGS CONSTRUCTION C360, C345, C3604, C377 rass PPLICTIONS RNGES Use with brass, copper or iron pipe Temperature Range: 65 to +250 F. Pressure Range: Up to 1000 PSI Pipe Thread ssembly:
High Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
Instrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
Fluid Power 7 FLUID POWER TABLE OF CONTENTS
UI POWR luid Power SION PG NO. UI POWR SSORIS & OOS -1-1 O 8 RSS IINGS -2-1 O 26 S, SINSS & M IINGS -3-1 O 32 PSI IINGS -4-1 O 8 UING -5-1 O 2 WHRH HYRUIS -6-1 O 28 GS HYRUIS --1 O 24 VVS & OUPRS -8-1
Pipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
Quick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
Hand Crank & Brake Assembly. 12V 1 /3 hp Motor. See Page 128 for Reel Dimensions & Sizes. (lengths over 100' are spliced)
ooster The kron rass ooster Reel is designed to be light weight and extremely durable. There are more options than ever as these reels are available in multiple sizes, and in both electric and manual rewind.
Pipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
INSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
BC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
Vacuum Pad: Large Size Bellows Type
Vacuum Pad: Large Size ellows Type Series ZPT/ZPX ø4, ø5, ø, ø, ø1, ø Z ZX ZR ZM deal for loads with a curved surface, heavyweight loads and loads with large surface area. ZM ZQ Z ZU ZL Z Z ZP SP ZUK MJ
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
60 Series Tube Fittings and Tubing
60 Series Fittings and ubing 60,000 psi (4137 bar) FIOK Group FIOK GmbH (Headquarter) Sprendlinger andstr. 115, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 Fax: +49 69 8900 4495 FIOK, Inc. 13843
MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
Z Tube O.D. Slze. Min
S Fittgs kok S Straigt Og Seal Fittgs are of positionable feature and provide connection tube to straigt tread boss. Furter tis as an advantage of elimatg weldg and brazg process wen used as bulkead fittg
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
Self-Clinching Standoffs Series CFSO, CFSOS, CFSOA (Through Threads)
self-clinching standoffs are designed for quick, easy installation with any standard pneumatic, hydraulic or mechanical press. -threaded standoffs are used in metal panels with thickness of.040 in. (1.0
Series VC Direct Operated 2 Port Solenoid Valve for Oil. Series VCL VX VN VQ VDW VC LV PA
Series V irect Operated Port Solenoid Valve for Oil Series V VX VN V VW V V P.-9 Multipurpose Valve for Oil irect Operated Port Solenoid Valve for Oil Series V Kerosene, uel oil class (fuel oil ), Silicone
Parts List Safety Stations
Safety Stations tem Part Number escription Shower eads P450-032OR Orange S Plastic Shower ead P450-032RN reen S Plastic Shower ead P450-032YL Yellow S Plastic Shower ead P450-048 10 ia. Stainless Steel
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
Compression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
Instrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
Catalogue 7 STAUFF Test
est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Introduction Introduction 4-11 est Couplings 12-53 est daptors 54-59 B est Hoses and Connectors 60-71 C echnical ppendix 72-77 D
MULTI-PORT MONOBLOCK VALVE HMB & 2BE SERIES
MULTI-PORT MONOLOK VLV M & 2 SRIS IPRM MONOLOK VLV OR US & UROP MRKT M SRIS MTRILS O ONSTRUTION - WTT PRTS Item No. Parts Material 1 ody SS316L Var or Vim/Var (1) 2 Seat older SS316L Var or Vim/Var (1)
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
Series 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal
onstruction Miniature fittings Hose nipple arb fitting arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal Tubing ap nut ertainly
Isys Micro Series. Air Control Valves. Section E
Series ir ontrol Valves Section www.parker.com/pneu/micro X asic Valve unctions... asic Valve eatures... Product Overview... v harts...5 Plug-in Valve Part Numbers...6 Plug-in anifolds...7 Plug-in nd Plate
How to Order. M5 M5 x 0.8 U10/ UNF
Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
- hydraulic tools & equipment -
- hydraulic tools & equipment - PUMPS YLINRS PULLRS JKS TOOLS SSORIS 1-18 let your boss do the hard work oss ydraulics was born from over 150 years of collective experience in the ustralian market. t oss
Steel Tube Fittings. Duolok. Unilok. Quality Instrumentation Fittings
Steel ube ittings uolok Quality Instrumentation ittings ompany Information 1926 SSP ittings orp. is founded in leveland, Ohio, U.S.. SSP begins as a contract manufacturer of screw machine products in brass
Table of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
Bladder Accumulator 690 to 760 Bar Range
Hydraulic & Offshore Supplies ladder ccumulator 690 to 760 ar Range YOUR GTWY TO GLOL SUPPLY HOS SSMLIS PRSSUR TSTING WLFORM QUIPMNT PCKGS FLNGS PIP & TU Hydraulic HY0-00-S/UK Featur es and imensions ladder
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
Medium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
Metric One-Touch Fittings
Metric One-ouch Fittings pplicable tube material pplicable tube O.D (mm) With Sealant SQH 1/ 1/ Soft 3/ olyurethane ф ф ф ф ф SQ 1/ 1/ Soft 3/ olyurethane SQ 1/ 1/ Soft 3/ olyurethane SQY 1/ 1/ Soft 3/
Compression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
DD & DM Valves. Dualine, Grease & Oil. General. Operation. Features. DM Valve. DD Valve R5 09/12
DD & DM Valves Dualine, Grease & Oil General DD and DM Valves are completely hydraulic in operation and will deliver either oil or grease. These Dualine valves are also fully and individually adjustable
ISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
SOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1
SONOI VVS pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 TURS Rugged forged brass bodied solenoid valves (mono- or bistable function) designed to provide maximum flow Solenoid
Hose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
Section VIII Hydraulic Tooling
Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS
Hose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
atalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
Pneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
Coolant Valve. Series VNC. Cylinder actuation by pilot air. Wide selection of port size and variations
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) type (3 to ) Low water hammer or details, refer to page 07. Large
SOLENOID VALVES direct operated, basic flow balanced poppet 1/4
SONOI VVS direct operated, basic flow balanced poppet /4 U / Series 7 TURS The valves are certified according to I 6508 unctional Safety data and have SI- capability (xida approval) The solenoid valves
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
VOFXSERIES INTERCHANGE > Similar Couplings (Oil & Gas)
VOXSRIS IRCA > Similar Couplings (Oil & as) CICAL AURS A OPIOS Interchange Similar Couplings (Oil & as) Available sizes rom to Sealing description itrile R aterial Stainless steel (AISI 316L) Connection
G1994HFC Safety Station with WideArea Eye/Face Wash, Hand and Foot Control, All-Stainless Steel
Safety Stations with Widerea ye/face Wash G1994HF Safety Station with Widerea ye/face Wash, Hand and Foot ontrol, ll-stainless Steel pplication: ll-stainless steel combination Widerea eye/face wash and